path: root/test/CodeGen/X86/switch.ll

; RUN: llc -mtriple=x86_64-linux-gnu %s -o - | FileCheck %s
; RUN: llc -mtriple=x86_64-linux-gnu %s -o - -O0 | FileCheck --check-prefix=NOOPT %s

declare void @g(i32)

define void @basic(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 3, label %bb0
    i32 1, label %bb1
    i32 4, label %bb1
    i32 5, label %bb2
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 1) br label %return
return: ret void

; Lowered as a jump table, both with and without optimization.
; CHECK-LABEL: basic
; CHECK: decl
; CHECK: cmpl $4
; CHECK: ja
; CHECK: jmpq *.LJTI
; NOOPT-LABEL: basic
; NOOPT: decl
; NOOPT: subl $4
; NOOPT: ja
; NOOPT: movq .LJTI
; NOOPT: jmpq
}


define void @simple_ranges(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0, label %bb0
    i32 1, label %bb0
    i32 2, label %bb0
    i32 3, label %bb0
    i32 100, label %bb1
    i32 101, label %bb1
    i32 102, label %bb1
    i32 103, label %bb1
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
return: ret void

; Should be lowered to two range checks.
; CHECK-LABEL: simple_ranges
; CHECK: leal -100
; CHECK: cmpl $4
; CHECK: jb
; CHECK: cmpl $3
; CHECK: ja

; We do this even at -O0, because it's cheap and makes codegen faster.
; NOOPT-LABEL: simple_ranges
; NOOPT: subl $4
; NOOPT: jb
; NOOPT: addl $-100
; NOOPT: subl $4
; NOOPT: jb
}


define void @jt_is_better(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0, label %bb0
    i32 2, label %bb0
    i32 4, label %bb0
    i32 1, label %bb1
    i32 3, label %bb1
    i32 5, label %bb1

    i32 6, label %bb2
    i32 7, label %bb3
    i32 8, label %bb4
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
bb4: tail call void @g(i32 4) br label %return
return: ret void

; Cases 0-5 could be lowered with two bit tests,
; but with 6-8, the whole switch is suitable for a jump table.
; CHECK-LABEL: jt_is_better
; CHECK: cmpl $8
; CHECK: ja
; CHECK: jmpq *.LJTI
}


define void @bt_is_better(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0, label %bb0
    i32 3, label %bb0
    i32 6, label %bb0
    i32 1, label %bb1
    i32 4, label %bb1
    i32 7, label %bb1
    i32 2, label %bb2
    i32 5, label %bb2
    i32 8, label %bb2
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
return: ret void

; This could be lowered as a jump table, but bit tests is more efficient.
; CHECK-LABEL: bt_is_better
; The bit test on 2,5,8 is unnecessary as all cases cover the rage [0, 8].
; The range check guarantees that cases other than 0,3,6 and 1,4,7 must be
; in 2,5,8.
;
; 73 = 2^0 + 2^3 + 2^6
; CHECK: movl $73
; CHECK: btl
; 146 = 2^1 + 2^4 + 2^7
; CHECK: movl $146
; CHECK: btl
; 292 = 2^2 + 2^5 + 2^8
; CHECK-NOT: movl $292
; CHECK-NOT: btl
}

define void @bt_is_better2(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0, label %bb0
    i32 3, label %bb0
    i32 6, label %bb0
    i32 1, label %bb1
    i32 4, label %bb1
    i32 7, label %bb1
    i32 2, label %bb2
    i32 8, label %bb2
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
return: ret void

; This will also be lowered as bit test, but as the range [0,8] is not fully
; covered (5 missing), the default statement can be jumped to and we end up
; with one more branch.
; CHECK-LABEL: bt_is_better2
;
; 73 = 2^0 + 2^3 + 2^6
; CHECK: movl $73
; CHECK: btl
; 146 = 2^1 + 2^4 + 2^7
; CHECK: movl $146
; CHECK: btl
; 260 = 2^2 + 2^8
; CHECK: movl $260
; CHECK: btl
}

define void @bt_is_better3(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 10, label %bb0
    i32 13, label %bb0
    i32 16, label %bb0
    i32 11, label %bb1
    i32 14, label %bb1
    i32 17, label %bb1
    i32 12, label %bb2
    i32 18, label %bb2
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
return: ret void

; We don't have to subtract 10 from the case value to let the range become
; [0, 8], as each value in the range [10, 18] can be represented by bits in a
; word. Then we still need a branch to jump to the default statement for the
; range [0, 10).
; CHECK-LABEL: bt_is_better3
;
; 74752 = 2^10 + 2^13 + 2^16
; CHECK: movl $74752
; CHECK: btl
; 149504 = 2^11 + 2^14 + 2^17
; CHECK: movl $149504
; CHECK: btl
; 266240 = 2^12 + 2^15 + 2^18
; CHECK: movl $266240
; CHECK: btl
}


define void @optimal_pivot1(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 100, label %bb0
    i32 200, label %bb1
    i32 300, label %bb0
    i32 400, label %bb1
    i32 500, label %bb0
    i32 600, label %bb1

  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
return: ret void

; Should pivot around 400 for two subtrees of equal size.
; CHECK-LABEL: optimal_pivot1
; CHECK-NOT: cmpl
; CHECK: cmpl $399
}


define void @optimal_pivot2(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 100, label %bb0   i32 101, label %bb1   i32 102, label %bb2   i32 103, label %bb3
    i32 200, label %bb0   i32 201, label %bb1   i32 202, label %bb2   i32 203, label %bb3
    i32 300, label %bb0   i32 301, label %bb1   i32 302, label %bb2   i32 303, label %bb3
    i32 400, label %bb0   i32 401, label %bb1   i32 402, label %bb2   i32 403, label %bb3

  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
return: ret void

; Should pivot around 300 for two subtrees with two jump tables each.
; CHECK-LABEL: optimal_pivot2
; CHECK-NOT: cmpl
; CHECK: cmpl $299
; CHECK: jmpq *.LJTI
; CHECK: jmpq *.LJTI
; CHECK: jmpq *.LJTI
; CHECK: jmpq *.LJTI
}


define void @optimal_jump_table1(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0,  label %bb0
    i32 5,  label %bb1
    i32 6,  label %bb2
    i32 12, label %bb3
    i32 13, label %bb4
    i32 15, label %bb5
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
bb4: tail call void @g(i32 4) br label %return
bb5: tail call void @g(i32 5) br label %return
return: ret void

; Splitting in the largest gap (between 6 and 12) would yield suboptimal result.
; Expecting a jump table from 5 to 15.
; CHECK-LABEL: optimal_jump_table1
; CHECK: leal -5
; CHECK: cmpl $10
; CHECK: jmpq *.LJTI

; At -O0, we don't build jump tables for only parts of a switch.
; NOOPT-LABEL: optimal_jump_table1
; NOOPT: testl %edi, %edi
; NOOPT: je
; NOOPT: subl $5, %eax
; NOOPT: je
; NOOPT: subl $6, %eax
; NOOPT: je
; NOOPT: subl $12, %eax
; NOOPT: je
; NOOPT: subl $13, %eax
; NOOPT: je
; NOOPT: subl $15, %eax
; NOOPT: je
}


define void @optimal_jump_table2(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0,  label %bb0
    i32 1,  label %bb1
    i32 2,  label %bb2
    i32 9,  label %bb3
    i32 14, label %bb4
    i32 15, label %bb5
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
bb4: tail call void @g(i32 4) br label %return
bb5: tail call void @g(i32 5) br label %return
return: ret void

; Partitioning the cases to the minimum number of dense sets is not good enough.
; This can be partitioned as {0,1,2,9},{14,15} or {0,1,2},{9,14,15}. The former
; should be preferred. Expecting a table from 0-9.
; CHECK-LABEL: optimal_jump_table2
; CHECK: cmpl $9
; CHECK: jmpq *.LJTI
}


define void @optimal_jump_table3(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 1,  label %bb0
    i32 2,  label %bb1
    i32 3,  label %bb2
    i32 10, label %bb3
    i32 13, label %bb0
    i32 14, label %bb1
    i32 15, label %bb2
    i32 20, label %bb3
    i32 25, label %bb4
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
bb4: tail call void @g(i32 4) br label %return
return: ret void

; Splitting to maximize left-right density sum and gap size would split this
; between 3 and 10, and then between 20 and 25. It's better to build a table
; from 1-20.
; CHECK-LABEL: optimal_jump_table3
; CHECK: leal -1
; CHECK: cmpl $19
; CHECK: jmpq *.LJTI
}

%struct.S = type { %struct.S*, i32 }
define void @phi_node_trouble(%struct.S* %s) {
entry:
  br label %header
header:
  %ptr = phi %struct.S* [ %s, %entry ], [ %next, %loop ]
  %bool = icmp eq %struct.S* %ptr, null
  br i1 %bool, label %exit, label %loop
loop:
  %nextptr = getelementptr inbounds %struct.S, %struct.S* %ptr, i64 0, i32 0
  %next = load %struct.S*, %struct.S** %nextptr
  %xptr = getelementptr inbounds %struct.S, %struct.S* %next, i64 0, i32 1
  %x = load i32, i32* %xptr
  switch i32 %x, label %exit [
    i32 4, label %header
    i32 36, label %exit2
    i32 69, label %exit2
    i32 25, label %exit2
  ]
exit:
  ret void
exit2:
  ret void

; This will be lowered to a comparison with 4 and then bit tests. Make sure
; that the phi node in %header gets a value from the comparison block.
; CHECK-LABEL: phi_node_trouble
; CHECK: movq (%[[REG1:[a-z]+]]), %[[REG1]]
; CHECK: movl 8(%[[REG1]]), %[[REG2:[a-z]+]]
; CHECK: cmpl $4, %[[REG2]]
}


define void @default_only(i32 %x) {
entry:
  br label %sw
return:
  ret void
sw:
  switch i32 %x, label %return [
  ]

; Branch directly to the default.
; (In optimized builds the switch is removed earlier.)
; NOOPT-LABEL: default_only
; NOOPT: .[[L:[A-Z0-9_]+]]:
; NOOPT-NEXT: retq
; NOOPT: jmp .[[L]]
}


define void @int_max_table_cluster(i8 %x) {
entry:
  switch i8 %x, label %return [
    i8 0, label %bb0 i8 1, label %bb0 i8 2, label %bb0 i8 3, label %bb0
    i8 4, label %bb0 i8 5, label %bb0 i8 6, label %bb0 i8 7, label %bb0
    i8 8, label %bb0 i8 9, label %bb0 i8 10, label %bb0 i8 11, label %bb0
    i8 12, label %bb0 i8 13, label %bb0 i8 14, label %bb0 i8 15, label %bb0
    i8 16, label %bb0 i8 17, label %bb0 i8 18, label %bb0 i8 19, label %bb0
    i8 20, label %bb0 i8 21, label %bb0 i8 22, label %bb0 i8 23, label %bb0
    i8 24, label %bb0 i8 25, label %bb0 i8 26, label %bb0 i8 27, label %bb0
    i8 28, label %bb0 i8 29, label %bb0 i8 30, label %bb0 i8 31, label %bb0
    i8 32, label %bb0 i8 33, label %bb0 i8 34, label %bb0 i8 35, label %bb0
    i8 36, label %bb0 i8 37, label %bb0 i8 38, label %bb0 i8 39, label %bb0
    i8 40, label %bb0 i8 41, label %bb0 i8 42, label %bb0 i8 43, label %bb0
    i8 44, label %bb0 i8 45, label %bb0 i8 46, label %bb0 i8 47, label %bb0
    i8 48, label %bb0 i8 49, label %bb0 i8 50, label %bb0 i8 51, label %bb0
    i8 52, label %bb0 i8 53, label %bb0 i8 54, label %bb0 i8 55, label %bb0
    i8 56, label %bb0 i8 57, label %bb0 i8 58, label %bb0 i8 59, label %bb0
    i8 60, label %bb0 i8 61, label %bb0 i8 62, label %bb0 i8 63, label %bb0
    i8 64, label %bb0 i8 65, label %bb0 i8 66, label %bb0 i8 67, label %bb0
    i8 68, label %bb0 i8 69, label %bb0 i8 70, label %bb0 i8 71, label %bb0
    i8 72, label %bb0 i8 73, label %bb0 i8 74, label %bb0 i8 75, label %bb0
    i8 76, label %bb0 i8 77, label %bb0 i8 78, label %bb0 i8 79, label %bb0
    i8 80, label %bb0 i8 81, label %bb0 i8 82, label %bb0 i8 83, label %bb0
    i8 84, label %bb0 i8 85, label %bb0 i8 86, label %bb0 i8 87, label %bb0
    i8 88, label %bb0 i8 89, label %bb0 i8 90, label %bb0 i8 91, label %bb0
    i8 92, label %bb0 i8 93, label %bb0 i8 94, label %bb0 i8 95, label %bb0
    i8 96, label %bb0 i8 97, label %bb0 i8 98, label %bb0 i8 99, label %bb0
    i8 100, label %bb0 i8 101, label %bb0 i8 102, label %bb0 i8 103, label %bb0
    i8 104, label %bb0 i8 105, label %bb0 i8 106, label %bb0 i8 107, label %bb0
    i8 108, label %bb0 i8 109, label %bb0 i8 110, label %bb0 i8 111, label %bb0
    i8 112, label %bb0 i8 113, label %bb0 i8 114, label %bb0 i8 115, label %bb0
    i8 116, label %bb0 i8 117, label %bb0 i8 118, label %bb0 i8 119, label %bb0
    i8 120, label %bb0 i8 121, label %bb0 i8 122, label %bb0 i8 123, label %bb0
    i8 124, label %bb0 i8 125, label %bb0 i8 126, label %bb0 i8 127, label %bb0
    i8 -64, label %bb1 i8 -63, label %bb1 i8 -62, label %bb1 i8 -61, label %bb1
    i8 -60, label %bb1 i8 -59, label %bb1 i8 -58, label %bb1 i8 -57, label %bb1
    i8 -56, label %bb1 i8 -55, label %bb1 i8 -54, label %bb1 i8 -53, label %bb1
    i8 -52, label %bb1 i8 -51, label %bb1 i8 -50, label %bb1 i8 -49, label %bb1
    i8 -48, label %bb1 i8 -47, label %bb1 i8 -46, label %bb1 i8 -45, label %bb1
    i8 -44, label %bb1 i8 -43, label %bb1 i8 -42, label %bb1 i8 -41, label %bb1
    i8 -40, label %bb1 i8 -39, label %bb1 i8 -38, label %bb1 i8 -37, label %bb1
    i8 -36, label %bb1 i8 -35, label %bb1 i8 -34, label %bb1 i8 -33, label %bb1
    i8 -32, label %bb2 i8 -31, label %bb2 i8 -30, label %bb2 i8 -29, label %bb2
    i8 -28, label %bb2 i8 -27, label %bb2 i8 -26, label %bb2 i8 -25, label %bb2
    i8 -24, label %bb2 i8 -23, label %bb2 i8 -22, label %bb2 i8 -21, label %bb2
    i8 -20, label %bb2 i8 -19, label %bb2 i8 -18, label %bb2 i8 -17, label %bb2
    i8 -16, label %bb3 i8 -15, label %bb3 i8 -14, label %bb3 i8 -13, label %bb3
    i8 -12, label %bb3 i8 -11, label %bb3 i8 -10, label %bb3 i8 -9, label %bb3
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 1) br label %return
bb3: tail call void @g(i32 1) br label %return
return: ret void

; Don't infloop on jump tables where the upper bound is the max value of the
; input type (in this case 127).
; CHECK-LABEL: int_max_table_cluster
; CHECK: jmpq *.LJTI
}


define void @bt_order_by_weight(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0, label %bb0
    i32 3, label %bb0
    i32 6, label %bb0
    i32 1, label %bb1
    i32 4, label %bb1
    i32 7, label %bb1
    i32 2, label %bb2
    i32 5, label %bb2
    i32 8, label %bb2
    i32 9, label %bb2
  ], !prof !1
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
return: ret void

; Cases 1,4,7 have a very large branch weight (which shouldn't overflow), so
; their bit test should come first. 0,3,6 and 2,5,8,9 both have a weight of 12,
; but the latter set has more cases, so should be tested for earlier.
; The bit test on 0,3,6 is unnecessary as all cases cover the rage [0, 9].
; The range check guarantees that cases other than 1,4,7 and 2,5,8,9 must be
; in 0,3,6.

; CHECK-LABEL: bt_order_by_weight
; 146 = 2^1 + 2^4 + 2^7
; CHECK: movl $146
; CHECK: btl
; 292 = 2^2 + 2^5 + 2^8 + 2^9
; CHECK: movl $804
; CHECK: btl
; 73 = 2^0 + 2^3 + 2^6
; CHECK-NOT: movl $73
; CHECK-NOT: btl
}

!1 = !{!"branch_weights",
       ; Default:
       i32 1,
       ; Cases 0,3,6:
       i32 4, i32 4, i32 4,
       ; Cases 1,4,7:
       i32 4294967295, i32 2, i32 4294967295,
       ; Cases 2,5,8,9:
       i32 3, i32 3, i32 3, i32 3}

define void @order_by_weight_and_fallthrough(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 100, label %bb1
    i32 200, label %bb0
    i32 300, label %bb0
  ], !prof !2
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
return: ret void

; Case 200 has the highest weight and should come first. 100 and 300 have the
; same weight, but 300 goes to the 'next' block, so should be last.
; CHECK-LABEL: order_by_weight_and_fallthrough
; CHECK: cmpl $200
; CHECK: cmpl $100
; CHECK: cmpl $300
}

!2 = !{!"branch_weights",
       ; Default:
       i32 1,
       ; Case 100:
       i32 10,
       ; Case 200:
       i32 1000,
       ; Case 300:
       i32 10}


define void @zero_weight_tree(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0,  label %bb0
    i32 10, label %bb1
    i32 20, label %bb2
    i32 30, label %bb3
    i32 40, label %bb4
    i32 50, label %bb5
  ], !prof !3
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
bb4: tail call void @g(i32 4) br label %return
bb5: tail call void @g(i32 5) br label %return
return: ret void

; Make sure to pick a pivot in the middle also with zero-weight cases.
; CHECK-LABEL: zero_weight_tree
; CHECK-NOT: cmpl
; CHECK: cmpl $29
}

!3 = !{!"branch_weights", i32 1, i32 10, i32 0, i32 0, i32 0, i32 0, i32 10}


define void @left_leaning_weight_balanced_tree(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0,  label %bb0
    i32 10, label %bb1
    i32 20, label %bb2
    i32 30, label %bb3
    i32 40, label %bb4
    i32 50, label %bb5
    i32 60, label %bb6
    i32 70, label %bb6
  ], !prof !4
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
bb4: tail call void @g(i32 4) br label %return
bb5: tail call void @g(i32 5) br label %return
bb6: tail call void @g(i32 6) br label %return
bb7: tail call void @g(i32 7) br label %return
return: ret void

; Without branch probabilities, the pivot would be 40, since that would yield
; equal-sized sub-trees. When taking weights into account, case 70 becomes the
; pivot. Since there is room for 3 cases in a leaf, cases 50 and 60 are also
; included in the right-hand side because that doesn't reduce their rank.

; CHECK-LABEL: left_leaning_weight_balanced_tree
; CHECK-NOT: cmpl
; CHECK: cmpl $49
}

!4 = !{!"branch_weights", i32 1, i32 10, i32 1, i32 1, i32 1, i32 1, i32 1, i32 1, i32 1000}


define void @left_leaning_weight_balanced_tree2(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0,  label %bb0
    i32 10, label %bb1
    i32 20, label %bb2
    i32 30, label %bb3
    i32 40, label %bb4
    i32 50, label %bb5
    i32 60, label %bb6
    i32 70, label %bb6
  ], !prof !5
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
bb4: tail call void @g(i32 4) br label %return
bb5: tail call void @g(i32 5) br label %return
bb6: tail call void @g(i32 6) br label %return
bb7: tail call void @g(i32 7) br label %return
return: ret void

; Same as the previous test, except case 50 has higher rank to the left than it
; would have on the right. Case 60 would have the same rank on both sides, so is
; moved into the leaf.

; CHECK-LABEL: left_leaning_weight_balanced_tree2
; CHECK-NOT: cmpl
; CHECK: cmpl $59
}

!5 = !{!"branch_weights", i32 1, i32 10, i32 1, i32 1, i32 1, i32 1, i32 90, i32 70, i32 1000}


define void @right_leaning_weight_balanced_tree(i32 %x) {
entry:
  switch i32 %x, label %return [
    i32 0,  label %bb0
    i32 10, label %bb1
    i32 20, label %bb2
    i32 30, label %bb3
    i32 40, label %bb4
    i32 50, label %bb5
    i32 60, label %bb6
    i32 70, label %bb6
  ], !prof !6
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
bb4: tail call void @g(i32 4) br label %return
bb5: tail call void @g(i32 5) br label %return
bb6: tail call void @g(i32 6) br label %return
bb7: tail call void @g(i32 7) br label %return
return: ret void

; Analogous to left_leaning_weight_balanced_tree.

; CHECK-LABEL: right_leaning_weight_balanced_tree
; CHECK-NOT: cmpl
; CHECK: cmpl $19
}

!6 = !{!"branch_weights", i32 1, i32 1000, i32 1, i32 1, i32 1, i32 1, i32 1, i32 1, i32 10}


define void @jump_table_affects_balance(i32 %x) {
entry:
  switch i32 %x, label %return [
    ; Jump table:
    i32 0,  label %bb0
    i32 1,  label %bb1
    i32 2,  label %bb2
    i32 3,  label %bb3

    i32 100, label %bb0
    i32 200, label %bb1
    i32 300, label %bb2
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
bb2: tail call void @g(i32 2) br label %return
bb3: tail call void @g(i32 3) br label %return
return: ret void

; CHECK-LABEL: jump_table_affects_balance
; If the tree were balanced based on number of clusters, {0-3,100} would go on
; the left and {200,300} on the right. However, the jump table weights as much
; as its components, so 100 is selected as the pivot.
; CHECK-NOT: cmpl
; CHECK: cmpl $99
}


define void @pr23738(i4 %x) {
entry:
  switch i4 %x, label %bb0 [
    i4 0, label %bb1
    i4 1, label %bb1
    i4 -5, label %bb1
  ]
bb0: tail call void @g(i32 0) br label %return
bb1: tail call void @g(i32 1) br label %return
return: ret void
; Don't assert due to truncating the bitwidth (64) to i4 when checking
; that the bit-test range fits in a word.
}