diff options
Diffstat (limited to 'kernel/time')
| -rw-r--r-- | kernel/time/Kconfig | 2 | ||||
| -rw-r--r-- | kernel/time/alarmtimer.c | 2 | ||||
| -rw-r--r-- | kernel/time/clockevents.c | 1 | ||||
| -rw-r--r-- | kernel/time/clocksource.c | 111 | ||||
| -rw-r--r-- | kernel/time/tick-broadcast.c | 2 | ||||
| -rw-r--r-- | kernel/time/tick-sched.c | 105 | ||||
| -rw-r--r-- | kernel/time/timekeeping.c | 94 |
7 files changed, 241 insertions, 76 deletions
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig index b26c2228fe92..2cf9cc7aa103 100644 --- a/kernel/time/Kconfig +++ b/kernel/time/Kconfig @@ -25,7 +25,7 @@ config HIGH_RES_TIMERS config GENERIC_CLOCKEVENTS_BUILD bool default y - depends on GENERIC_CLOCKEVENTS || GENERIC_CLOCKEVENTS_MIGR + depends on GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS_MIN_ADJUST bool diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index c436e790b21b..8a46f5d64504 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -195,7 +195,7 @@ static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer) struct alarm *alarm; ktime_t expired = next->expires; - if (expired.tv64 >= now.tv64) + if (expired.tv64 > now.tv64) break; alarm = container_of(next, struct alarm, node); diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 1ecd6ba36d6c..9cd928f7a7c6 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/notifier.h> #include <linux/smp.h> -#include <linux/sysdev.h> #include "tick-internal.h" diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index cf52fda2e096..a45ca167ab24 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -23,8 +23,8 @@ * o Allow clocksource drivers to be unregistered */ +#include <linux/device.h> #include <linux/clocksource.h> -#include <linux/sysdev.h> #include <linux/init.h> #include <linux/module.h> #include <linux/sched.h> /* for spin_unlock_irq() using preempt_count() m68k */ @@ -492,6 +492,22 @@ void clocksource_touch_watchdog(void) } /** + * clocksource_max_adjustment- Returns max adjustment amount + * @cs: Pointer to clocksource + * + */ +static u32 clocksource_max_adjustment(struct clocksource *cs) +{ + u64 ret; + /* + * We won't try to correct for more then 11% adjustments (110,000 ppm), + */ + ret = (u64)cs->mult * 11; + do_div(ret,100); + return (u32)ret; +} + +/** * clocksource_max_deferment - Returns max time the clocksource can be deferred * @cs: Pointer to clocksource * @@ -503,25 +519,28 @@ static u64 clocksource_max_deferment(struct clocksource *cs) /* * Calculate the maximum number of cycles that we can pass to the * cyc2ns function without overflowing a 64-bit signed result. The - * maximum number of cycles is equal to ULLONG_MAX/cs->mult which - * is equivalent to the below. - * max_cycles < (2^63)/cs->mult - * max_cycles < 2^(log2((2^63)/cs->mult)) - * max_cycles < 2^(log2(2^63) - log2(cs->mult)) - * max_cycles < 2^(63 - log2(cs->mult)) - * max_cycles < 1 << (63 - log2(cs->mult)) + * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj) + * which is equivalent to the below. + * max_cycles < (2^63)/(cs->mult + cs->maxadj) + * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj))) + * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj)) + * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj)) + * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj)) * Please note that we add 1 to the result of the log2 to account for * any rounding errors, ensure the above inequality is satisfied and * no overflow will occur. */ - max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1)); + max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1)); /* * The actual maximum number of cycles we can defer the clocksource is * determined by the minimum of max_cycles and cs->mask. + * Note: Here we subtract the maxadj to make sure we don't sleep for + * too long if there's a large negative adjustment. */ max_cycles = min_t(u64, max_cycles, (u64) cs->mask); - max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift); + max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj, + cs->shift); /* * To ensure that the clocksource does not wrap whilst we are idle, @@ -529,7 +548,7 @@ static u64 clocksource_max_deferment(struct clocksource *cs) * note a margin of 12.5% is used because this can be computed with * a shift, versus say 10% which would require division. */ - return max_nsecs - (max_nsecs >> 5); + return max_nsecs - (max_nsecs >> 3); } #ifndef CONFIG_ARCH_USES_GETTIMEOFFSET @@ -628,7 +647,7 @@ static void clocksource_enqueue(struct clocksource *cs) /** * __clocksource_updatefreq_scale - Used update clocksource with new freq - * @t: clocksource to be registered + * @cs: clocksource to be registered * @scale: Scale factor multiplied against freq to get clocksource hz * @freq: clocksource frequency (cycles per second) divided by scale * @@ -640,7 +659,6 @@ static void clocksource_enqueue(struct clocksource *cs) void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) { u64 sec; - /* * Calc the maximum number of seconds which we can run before * wrapping around. For clocksources which have a mask > 32bit @@ -651,7 +669,7 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) * ~ 0.06ppm granularity for NTP. We apply the same 12.5% * margin as we do in clocksource_max_deferment() */ - sec = (cs->mask - (cs->mask >> 5)); + sec = (cs->mask - (cs->mask >> 3)); do_div(sec, freq); do_div(sec, scale); if (!sec) @@ -661,13 +679,27 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) clocks_calc_mult_shift(&cs->mult, &cs->shift, freq, NSEC_PER_SEC / scale, sec * scale); + + /* + * for clocksources that have large mults, to avoid overflow. + * Since mult may be adjusted by ntp, add an safety extra margin + * + */ + cs->maxadj = clocksource_max_adjustment(cs); + while ((cs->mult + cs->maxadj < cs->mult) + || (cs->mult - cs->maxadj > cs->mult)) { + cs->mult >>= 1; + cs->shift--; + cs->maxadj = clocksource_max_adjustment(cs); + } + cs->max_idle_ns = clocksource_max_deferment(cs); } EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale); /** * __clocksource_register_scale - Used to install new clocksources - * @t: clocksource to be registered + * @cs: clocksource to be registered * @scale: Scale factor multiplied against freq to get clocksource hz * @freq: clocksource frequency (cycles per second) divided by scale * @@ -695,12 +727,18 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale); /** * clocksource_register - Used to install new clocksources - * @t: clocksource to be registered + * @cs: clocksource to be registered * * Returns -EBUSY if registration fails, zero otherwise. */ int clocksource_register(struct clocksource *cs) { + /* calculate max adjustment for given mult/shift */ + cs->maxadj = clocksource_max_adjustment(cs); + WARN_ONCE(cs->mult + cs->maxadj < cs->mult, + "Clocksource %s might overflow on 11%% adjustment\n", + cs->name); + /* calculate max idle time permitted for this clocksource */ cs->max_idle_ns = clocksource_max_deferment(cs); @@ -723,6 +761,8 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating) /** * clocksource_change_rating - Change the rating of a registered clocksource + * @cs: clocksource to be changed + * @rating: new rating */ void clocksource_change_rating(struct clocksource *cs, int rating) { @@ -734,6 +774,7 @@ EXPORT_SYMBOL(clocksource_change_rating); /** * clocksource_unregister - remove a registered clocksource + * @cs: clocksource to be unregistered */ void clocksource_unregister(struct clocksource *cs) { @@ -749,13 +790,14 @@ EXPORT_SYMBOL(clocksource_unregister); /** * sysfs_show_current_clocksources - sysfs interface for current clocksource * @dev: unused + * @attr: unused * @buf: char buffer to be filled with clocksource list * * Provides sysfs interface for listing current clocksource. */ static ssize_t -sysfs_show_current_clocksources(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) +sysfs_show_current_clocksources(struct device *dev, + struct device_attribute *attr, char *buf) { ssize_t count = 0; @@ -769,14 +811,15 @@ sysfs_show_current_clocksources(struct sys_device *dev, /** * sysfs_override_clocksource - interface for manually overriding clocksource * @dev: unused + * @attr: unused * @buf: name of override clocksource * @count: length of buffer * * Takes input from sysfs interface for manually overriding the default * clocksource selection. */ -static ssize_t sysfs_override_clocksource(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t sysfs_override_clocksource(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { size_t ret = count; @@ -804,13 +847,14 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev, /** * sysfs_show_available_clocksources - sysfs interface for listing clocksource * @dev: unused + * @attr: unused * @buf: char buffer to be filled with clocksource list * * Provides sysfs interface for listing registered clocksources */ static ssize_t -sysfs_show_available_clocksources(struct sys_device *dev, - struct sysdev_attribute *attr, +sysfs_show_available_clocksources(struct device *dev, + struct device_attribute *attr, char *buf) { struct clocksource *src; @@ -839,35 +883,36 @@ sysfs_show_available_clocksources(struct sys_device *dev, /* * Sysfs setup bits: */ -static SYSDEV_ATTR(current_clocksource, 0644, sysfs_show_current_clocksources, +static DEVICE_ATTR(current_clocksource, 0644, sysfs_show_current_clocksources, sysfs_override_clocksource); -static SYSDEV_ATTR(available_clocksource, 0444, +static DEVICE_ATTR(available_clocksource, 0444, sysfs_show_available_clocksources, NULL); -static struct sysdev_class clocksource_sysclass = { +static struct bus_type clocksource_subsys = { .name = "clocksource", + .dev_name = "clocksource", }; -static struct sys_device device_clocksource = { +static struct device device_clocksource = { .id = 0, - .cls = &clocksource_sysclass, + .bus = &clocksource_subsys, }; static int __init init_clocksource_sysfs(void) { - int error = sysdev_class_register(&clocksource_sysclass); + int error = subsys_system_register(&clocksource_subsys, NULL); if (!error) - error = sysdev_register(&device_clocksource); + error = device_register(&device_clocksource); if (!error) - error = sysdev_create_file( + error = device_create_file( &device_clocksource, - &attr_current_clocksource); + &dev_attr_current_clocksource); if (!error) - error = sysdev_create_file( + error = device_create_file( &device_clocksource, - &attr_available_clocksource); + &dev_attr_available_clocksource); return error; } diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index f954282d9a82..fd4a7b1625a2 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -71,7 +71,7 @@ int tick_check_broadcast_device(struct clock_event_device *dev) (dev->features & CLOCK_EVT_FEAT_C3STOP)) return 0; - clockevents_exchange_device(NULL, dev); + clockevents_exchange_device(tick_broadcast_device.evtdev, dev); tick_broadcast_device.evtdev = dev; if (!cpumask_empty(tick_get_broadcast_mask())) tick_broadcast_start_periodic(dev); diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 40420644d0ba..7656642e4b8e 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -275,42 +275,17 @@ u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time) } EXPORT_SYMBOL_GPL(get_cpu_iowait_time_us); -/** - * tick_nohz_stop_sched_tick - stop the idle tick from the idle task - * - * When the next event is more than a tick into the future, stop the idle tick - * Called either from the idle loop or from irq_exit() when an idle period was - * just interrupted by an interrupt which did not cause a reschedule. - */ -void tick_nohz_stop_sched_tick(int inidle) +static void tick_nohz_stop_sched_tick(struct tick_sched *ts) { - unsigned long seq, last_jiffies, next_jiffies, delta_jiffies, flags; - struct tick_sched *ts; + unsigned long seq, last_jiffies, next_jiffies, delta_jiffies; ktime_t last_update, expires, now; struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; u64 time_delta; int cpu; - local_irq_save(flags); - cpu = smp_processor_id(); ts = &per_cpu(tick_cpu_sched, cpu); - /* - * Call to tick_nohz_start_idle stops the last_update_time from being - * updated. Thus, it must not be called in the event we are called from - * irq_exit() with the prior state different than idle. - */ - if (!inidle && !ts->inidle) - goto end; - - /* - * Set ts->inidle unconditionally. Even if the system did not - * switch to NOHZ mode the cpu frequency governers rely on the - * update of the idle time accounting in tick_nohz_start_idle(). - */ - ts->inidle = 1; - now = tick_nohz_start_idle(cpu, ts); /* @@ -326,10 +301,10 @@ void tick_nohz_stop_sched_tick(int inidle) } if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) - goto end; + return; if (need_resched()) - goto end; + return; if (unlikely(local_softirq_pending() && cpu_online(cpu))) { static int ratelimit; @@ -339,7 +314,7 @@ void tick_nohz_stop_sched_tick(int inidle) (unsigned int) local_softirq_pending()); ratelimit++; } - goto end; + return; } ts->idle_calls++; @@ -434,7 +409,6 @@ void tick_nohz_stop_sched_tick(int inidle) ts->idle_tick = hrtimer_get_expires(&ts->sched_timer); ts->tick_stopped = 1; ts->idle_jiffies = last_jiffies; - rcu_enter_nohz(); } ts->idle_sleeps++; @@ -472,8 +446,64 @@ out: ts->next_jiffies = next_jiffies; ts->last_jiffies = last_jiffies; ts->sleep_length = ktime_sub(dev->next_event, now); -end: - local_irq_restore(flags); +} + +/** + * tick_nohz_idle_enter - stop the idle tick from the idle task + * + * When the next event is more than a tick into the future, stop the idle tick + * Called when we start the idle loop. + * + * The arch is responsible of calling: + * + * - rcu_idle_enter() after its last use of RCU before the CPU is put + * to sleep. + * - rcu_idle_exit() before the first use of RCU after the CPU is woken up. + */ +void tick_nohz_idle_enter(void) +{ + struct tick_sched *ts; + + WARN_ON_ONCE(irqs_disabled()); + + /* + * Update the idle state in the scheduler domain hierarchy + * when tick_nohz_stop_sched_tick() is called from the idle loop. + * State will be updated to busy during the first busy tick after + * exiting idle. + */ + set_cpu_sd_state_idle(); + + local_irq_disable(); + + ts = &__get_cpu_var(tick_cpu_sched); + /* + * set ts->inidle unconditionally. even if the system did not + * switch to nohz mode the cpu frequency governers rely on the + * update of the idle time accounting in tick_nohz_start_idle(). + */ + ts->inidle = 1; + tick_nohz_stop_sched_tick(ts); + + local_irq_enable(); +} + +/** + * tick_nohz_irq_exit - update next tick event from interrupt exit + * + * When an interrupt fires while we are idle and it doesn't cause + * a reschedule, it may still add, modify or delete a timer, enqueue + * an RCU callback, etc... + * So we need to re-calculate and reprogram the next tick event. + */ +void tick_nohz_irq_exit(void) +{ + struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); + + if (!ts->inidle) + return; + + tick_nohz_stop_sched_tick(ts); } /** @@ -515,11 +545,13 @@ static void tick_nohz_restart(struct tick_sched *ts, ktime_t now) } /** - * tick_nohz_restart_sched_tick - restart the idle tick from the idle task + * tick_nohz_idle_exit - restart the idle tick from the idle task * * Restart the idle tick when the CPU is woken up from idle + * This also exit the RCU extended quiescent state. The CPU + * can use RCU again after this function is called. */ -void tick_nohz_restart_sched_tick(void) +void tick_nohz_idle_exit(void) { int cpu = smp_processor_id(); struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); @@ -529,6 +561,7 @@ void tick_nohz_restart_sched_tick(void) ktime_t now; local_irq_disable(); + if (ts->idle_active || (ts->inidle && ts->tick_stopped)) now = ktime_get(); @@ -543,8 +576,6 @@ void tick_nohz_restart_sched_tick(void) ts->inidle = 0; - rcu_exit_nohz(); - /* Update jiffies first */ select_nohz_load_balancer(0); tick_do_update_jiffies64(now); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 169479994755..e6a5a6bc2769 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -131,7 +131,7 @@ static inline s64 timekeeping_get_ns_raw(void) /* calculate the delta since the last update_wall_time: */ cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; - /* return delta convert to nanoseconds using ntp adjusted mult. */ + /* return delta convert to nanoseconds. */ return clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift); } @@ -249,6 +249,8 @@ ktime_t ktime_get(void) secs = xtime.tv_sec + wall_to_monotonic.tv_sec; nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec; nsecs += timekeeping_get_ns(); + /* If arch requires, add in gettimeoffset() */ + nsecs += arch_gettimeoffset(); } while (read_seqretry(&xtime_lock, seq)); /* @@ -280,6 +282,8 @@ void ktime_get_ts(struct timespec *ts) *ts = xtime; tomono = wall_to_monotonic; nsecs = timekeeping_get_ns(); + /* If arch requires, add in gettimeoffset() */ + nsecs += arch_gettimeoffset(); } while (read_seqretry(&xtime_lock, seq)); @@ -802,14 +806,44 @@ static void timekeeping_adjust(s64 offset) s64 error, interval = timekeeper.cycle_interval; int adj; + /* + * The point of this is to check if the error is greater then half + * an interval. + * + * First we shift it down from NTP_SHIFT to clocksource->shifted nsecs. + * + * Note we subtract one in the shift, so that error is really error*2. + * This "saves" dividing(shifting) interval twice, but keeps the + * (error > interval) comparison as still measuring if error is + * larger then half an interval. + * + * Note: It does not "save" on aggravation when reading the code. + */ error = timekeeper.ntp_error >> (timekeeper.ntp_error_shift - 1); if (error > interval) { + /* + * We now divide error by 4(via shift), which checks if + * the error is greater then twice the interval. + * If it is greater, we need a bigadjust, if its smaller, + * we can adjust by 1. + */ error >>= 2; + /* + * XXX - In update_wall_time, we round up to the next + * nanosecond, and store the amount rounded up into + * the error. This causes the likely below to be unlikely. + * + * The proper fix is to avoid rounding up by using + * the high precision timekeeper.xtime_nsec instead of + * xtime.tv_nsec everywhere. Fixing this will take some + * time. + */ if (likely(error <= interval)) adj = 1; else adj = timekeeping_bigadjust(error, &interval, &offset); } else if (error < -interval) { + /* See comment above, this is just switched for the negative */ error >>= 2; if (likely(error >= -interval)) { adj = -1; @@ -817,9 +851,65 @@ static void timekeeping_adjust(s64 offset) offset = -offset; } else adj = timekeeping_bigadjust(error, &interval, &offset); - } else + } else /* No adjustment needed */ return; + WARN_ONCE(timekeeper.clock->maxadj && + (timekeeper.mult + adj > timekeeper.clock->mult + + timekeeper.clock->maxadj), + "Adjusting %s more then 11%% (%ld vs %ld)\n", + timekeeper.clock->name, (long)timekeeper.mult + adj, + (long)timekeeper.clock->mult + + timekeeper.clock->maxadj); + /* + * So the following can be confusing. + * + * To keep things simple, lets assume adj == 1 for now. + * + * When adj != 1, remember that the interval and offset values + * have been appropriately scaled so the math is the same. + * + * The basic idea here is that we're increasing the multiplier + * by one, this causes the xtime_interval to be incremented by + * one cycle_interval. This is because: + * xtime_interval = cycle_interval * mult + * So if mult is being incremented by one: + * xtime_interval = cycle_interval * (mult + 1) + * Its the same as: + * xtime_interval = (cycle_interval * mult) + cycle_interval + * Which can be shortened to: + * xtime_interval += cycle_interval + * + * So offset stores the non-accumulated cycles. Thus the current + * time (in shifted nanoseconds) is: + * now = (offset * adj) + xtime_nsec + * Now, even though we're adjusting the clock frequency, we have + * to keep time consistent. In other words, we can't jump back + * in time, and we also want to avoid jumping forward in time. + * + * So given the same offset value, we need the time to be the same + * both before and after the freq adjustment. + * now = (offset * adj_1) + xtime_nsec_1 + * now = (offset * adj_2) + xtime_nsec_2 + * So: + * (offset * adj_1) + xtime_nsec_1 = + * (offset * adj_2) + xtime_nsec_2 + * And we know: + * adj_2 = adj_1 + 1 + * So: + * (offset * adj_1) + xtime_nsec_1 = + * (offset * (adj_1+1)) + xtime_nsec_2 + * (offset * adj_1) + xtime_nsec_1 = + * (offset * adj_1) + offset + xtime_nsec_2 + * Canceling the sides: + * xtime_nsec_1 = offset + xtime_nsec_2 + * Which gives us: + * xtime_nsec_2 = xtime_nsec_1 - offset + * Which simplfies to: + * xtime_nsec -= offset + * + * XXX - TODO: Doc ntp_error calculation. + */ timekeeper.mult += adj; timekeeper.xtime_interval += interval; timekeeper.xtime_nsec -= offset; |