diff options
Diffstat (limited to 'drivers/char/isicom.c')
| -rw-r--r-- | drivers/char/isicom.c | 54 |
1 files changed, 31 insertions, 23 deletions
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 300d5bd6cd06..be2e8f9a27c3 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -113,6 +113,8 @@ * 64-bit verification */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/firmware.h> #include <linux/kernel.h> @@ -140,7 +142,6 @@ #define InterruptTheCard(base) outw(0, (base) + 0xc) #define ClearInterrupt(base) inw((base) + 0x0a) -#define pr_dbg(str...) pr_debug("ISICOM: " str) #ifdef DEBUG #define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c)) #else @@ -249,8 +250,7 @@ static int lock_card(struct isi_board *card) spin_unlock_irqrestore(&card->card_lock, card->flags); msleep(10); } - printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n", - card->base); + pr_warning("Failed to lock Card (0x%lx)\n", card->base); return 0; /* Failed to acquire the card! */ } @@ -379,13 +379,13 @@ static inline int __isicom_paranoia_check(struct isi_port const *port, char *name, const char *routine) { if (!port) { - printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for " - "dev %s in %s.\n", name, routine); + pr_warning("Warning: bad isicom magic for dev %s in %s.\n", + name, routine); return 1; } if (port->magic != ISICOM_MAGIC) { - printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for " - "dev %s in %s.\n", name, routine); + pr_warning("Warning: NULL isicom port for dev %s in %s.\n", + name, routine); return 1; } @@ -450,8 +450,8 @@ static void isicom_tx(unsigned long _data) if (!(inw(base + 0x02) & (1 << port->channel))) continue; - pr_dbg("txing %d bytes, port%d.\n", txcount, - port->channel + 1); + pr_debug("txing %d bytes, port%d.\n", + txcount, port->channel + 1); outw((port->channel << isi_card[card].shift_count) | txcount, base); residue = NO; @@ -547,8 +547,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) byte_count = header & 0xff; if (channel + 1 > card->port_count) { - printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): " - "%d(channel) > port_count.\n", base, channel+1); + pr_warning("%s(0x%lx): %d(channel) > port_count.\n", + __func__, base, channel+1); outw(0x0000, base+0x04); /* enable interrupts */ spin_unlock(&card->card_lock); return IRQ_HANDLED; @@ -582,14 +582,15 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) if (port->status & ISI_DCD) { if (!(header & ISI_DCD)) { /* Carrier has been lost */ - pr_dbg("interrupt: DCD->low.\n" - ); + pr_debug("%s: DCD->low.\n", + __func__); port->status &= ~ISI_DCD; tty_hangup(tty); } } else if (header & ISI_DCD) { /* Carrier has been detected */ - pr_dbg("interrupt: DCD->high.\n"); + pr_debug("%s: DCD->high.\n", + __func__); port->status |= ISI_DCD; wake_up_interruptible(&port->port.open_wait); } @@ -641,17 +642,19 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) break; case 2: /* Statistics */ - pr_dbg("isicom_interrupt: stats!!!.\n"); + pr_debug("%s: stats!!!\n", __func__); break; default: - pr_dbg("Intr: Unknown code in status packet.\n"); + pr_debug("%s: Unknown code in status packet.\n", + __func__); break; } } else { /* Data Packet */ count = tty_prepare_flip_string(tty, &rp, byte_count & ~1); - pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count); + pr_debug("%s: Can rx %d of %d bytes.\n", + __func__, count, byte_count); word_count = count >> 1; insw(base, rp, word_count); byte_count -= (word_count << 1); @@ -661,8 +664,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) byte_count -= 2; } if (byte_count > 0) { - pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping " - "bytes...\n", base, channel + 1); + pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n", + __func__, base, channel + 1); /* drain out unread xtra data */ while (byte_count > 0) { inw(base); @@ -888,8 +891,8 @@ static void isicom_shutdown_port(struct isi_port *port) struct isi_board *card = port->card; if (--card->count < 0) { - pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n", - card->base, card->count); + pr_debug("%s: bad board(0x%lx) count %d.\n", + __func__, card->base, card->count); card->count = 0; } /* last port was closed, shutdown that board too */ @@ -1681,13 +1684,13 @@ static int __init isicom_init(void) retval = tty_register_driver(isicom_normal); if (retval) { - pr_dbg("Couldn't register the dialin driver\n"); + pr_debug("Couldn't register the dialin driver\n"); goto err_puttty; } retval = pci_register_driver(&isicom_driver); if (retval < 0) { - printk(KERN_ERR "ISICOM: Unable to register pci driver.\n"); + pr_err("Unable to register pci driver.\n"); goto err_unrtty; } @@ -1717,3 +1720,8 @@ module_exit(isicom_exit); MODULE_AUTHOR("MultiTech"); MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("isi608.bin"); +MODULE_FIRMWARE("isi608em.bin"); +MODULE_FIRMWARE("isi616em.bin"); +MODULE_FIRMWARE("isi4608.bin"); +MODULE_FIRMWARE("isi4616.bin"); |