diff options
Diffstat (limited to 'Documentation/acpi/dsd/graph.txt')
| -rw-r--r-- | Documentation/acpi/dsd/graph.txt | 65 |
1 files changed, 35 insertions, 30 deletions
diff --git a/Documentation/acpi/dsd/graph.txt b/Documentation/acpi/dsd/graph.txt index 3131f457882b..b9ce910781dc 100644 --- a/Documentation/acpi/dsd/graph.txt +++ b/Documentation/acpi/dsd/graph.txt @@ -38,34 +38,39 @@ represents a connection to that interface. All port nodes are located under the device's "_DSD" node in the hierarchical data extension tree. The data extension related to each port node must begin -with "port" and must be followed by the number of the port as its key. The -target object it refers to should be called "PRTX", where "X" is the number of -the port. An example of such a package would be: +with "port" and must be followed by the "@" character and the number of the port +as its key. The target object it refers to should be called "PRTX", where "X" is +the number of the port. An example of such a package would be: - Package() { "port4", PRT4 } + Package() { "port@4", PRT4 } -Further on, endpoints are located under the port nodes. The hierarchical data -extension key of the endpoint nodes must begin with "endpoint" and must be -followed by the number of the endpoint. The object it refers to should be called -"EPXY", where "X" is the number of the port and "Y" is the number of the -endpoint. An example of such a package would be: +Further on, endpoints are located under the port nodes. The hierarchical +data extension key of the endpoint nodes must begin with +"endpoint" and must be followed by the "@" character and the number of the +endpoint. The object it refers to should be called "EPXY", where "X" is the +number of the port and "Y" is the number of the endpoint. An example of such a +package would be: - Package() { "endpoint0", EP40 } + Package() { "endpoint@0", EP40 } -Each port node contains a property extension key "port", the value of -which is the number of the port. Each endpoint is similarly numbered -with a property extension key "endpoint". Port numbers must be unique within a -device and endpoint numbers must be unique within a port. If a device object -may only has a single port, then the number of that port shall be zero. -Similarly, if a port may only have a single endpoint, the number of that -endpoint shall be zero. +Each port node contains a property extension key "port", the value of which is +the number of the port. Each endpoint is similarly numbered with a property +extension key "reg", the value of which is the number of the endpoint. Port +numbers must be unique within a device and endpoint numbers must be unique +within a port. If a device object may only has a single port, then the number +of that port shall be zero. Similarly, if a port may only have a single +endpoint, the number of that endpoint shall be zero. The endpoint reference uses property extension with "remote-endpoint" property name followed by a reference in the same package. Such references consist of the -the remote device reference, number of the port in the device and finally the -number of the endpoint in that port. Individual references thus appear as: +the remote device reference, the first package entry of the port data extension +reference under the device and finally the first package entry of the endpoint +data extension reference under the port. Individual references thus appear as: - Package() { device, port_number, endpoint_number } + Package() { device, "port@X", "endpoint@Y" } + +In the above example, "X" is the number of the port and "Y" is the number of the +endpoint. The references to endpoints must be always done both ways, to the remote endpoint and back from the referred remote endpoint node. @@ -83,24 +88,24 @@ A simple example of this is show below: }, ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { - Package () { "port0", PRT0 }, + Package () { "port@0", PRT0 }, } }) Name (PRT0, Package() { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { - Package () { "port", 0 }, + Package () { "reg", 0 }, }, ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { - Package () { "endpoint0", EP00 }, + Package () { "endpoint@0", EP00 }, } }) Name (EP00, Package() { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { - Package () { "endpoint", 0 }, - Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, 4, 0 } }, + Package () { "reg", 0 }, + Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } }, } }) } @@ -113,26 +118,26 @@ A simple example of this is show below: Name (_DSD, Package () { ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { - Package () { "port4", PRT4 }, + Package () { "port@4", PRT4 }, } }) Name (PRT4, Package() { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { - Package () { "port", 4 }, /* CSI-2 port number */ + Package () { "reg", 4 }, /* CSI-2 port number */ }, ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { - Package () { "endpoint0", EP40 }, + Package () { "endpoint@0", EP40 }, } }) Name (EP40, Package() { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { - Package () { "endpoint", 0 }, - Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, 0, 0 } }, + Package () { "reg", 0 }, + Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } }, } }) } |