diff options
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 46 | ||||
| -rw-r--r-- | drivers/net/dsa/mt7530.h | 4 |
2 files changed, 40 insertions, 10 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index c7d352da5448..3181e95586d6 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -428,24 +428,48 @@ static int mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) { struct mt7530_priv *priv = ds->priv; - u32 ncpo1, ssc_delta, trgint, i; + u32 ncpo1, ssc_delta, trgint, i, xtal; + + xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; + + if (xtal == HWTRAP_XTAL_20MHZ) { + dev_err(priv->dev, + "%s: MT7530 with a 20MHz XTAL is not supported!\n", + __func__); + return -EINVAL; + } switch (mode) { case PHY_INTERFACE_MODE_RGMII: trgint = 0; + /* PLL frequency: 125MHz */ ncpo1 = 0x0c80; - ssc_delta = 0x87; break; case PHY_INTERFACE_MODE_TRGMII: trgint = 1; - ncpo1 = 0x1400; - ssc_delta = 0x57; + if (priv->id == ID_MT7621) { + /* PLL frequency: 150MHz: 1.2GBit */ + if (xtal == HWTRAP_XTAL_40MHZ) + ncpo1 = 0x0780; + if (xtal == HWTRAP_XTAL_25MHZ) + ncpo1 = 0x0a00; + } else { /* PLL frequency: 250MHz: 2.0Gbit */ + if (xtal == HWTRAP_XTAL_40MHZ) + ncpo1 = 0x0c80; + if (xtal == HWTRAP_XTAL_25MHZ) + ncpo1 = 0x1400; + } break; default: dev_err(priv->dev, "xMII mode %d not supported\n", mode); return -EINVAL; } + if (xtal == HWTRAP_XTAL_25MHZ) + ssc_delta = 0x57; + else + ssc_delta = 0x87; + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(trgint)); @@ -507,7 +531,9 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) mt7530_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_MASK, RD_TAP(16)); else - mt7623_trgmii_set(priv, GSW_INTF_MODE, INTF_MODE_TRGMII); + if (priv->id != ID_MT7621) + mt7623_trgmii_set(priv, GSW_INTF_MODE, + INTF_MODE_TRGMII); return 0; } @@ -613,13 +639,13 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port, struct mt7530_priv *priv = ds->priv; if (phy_is_pseudo_fixed_link(phydev)) { - if (priv->id == ID_MT7530) { - dev_dbg(priv->dev, "phy-mode for master device = %x\n", - phydev->interface); + dev_dbg(priv->dev, "phy-mode for master device = %x\n", + phydev->interface); - /* Setup TX circuit incluing relevant PAD and driving */ - mt7530_pad_clk_setup(ds, phydev->interface); + /* Setup TX circuit incluing relevant PAD and driving */ + mt7530_pad_clk_setup(ds, phydev->interface); + if (priv->id == ID_MT7530) { /* Setup RX circuit, relevant PAD and driving on the * host which must be placed after the setup on the * device side is all finished. diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 4331429969fa..bfac90f48102 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -244,6 +244,10 @@ enum mt7530_vlan_port_attr { /* Register for hw trap status */ #define MT7530_HWTRAP 0x7800 +#define HWTRAP_XTAL_MASK (BIT(10) | BIT(9)) +#define HWTRAP_XTAL_25MHZ (BIT(10) | BIT(9)) +#define HWTRAP_XTAL_40MHZ (BIT(10)) +#define HWTRAP_XTAL_20MHZ (BIT(9)) /* Register for hw trap modification */ #define MT7530_MHWTRAP 0x7804 |