ALSA: au88x0: pr_* replaced with dev_*

pr_* macros replaced with dev_* as they are more preffered over pr_*.
each file which had pr_* was reviewed manually and replaced with dev_*.
here we have actually used the reference of the vortex which was added
to some functions in the previous patch of this series.

The prefix of the CARD_NAME and prefix of "vortex:" was also
removed as the dev_* will print the device name.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 16 insertions, 17 deletions

diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c
index 21ce31f636bc..e9c3833f6d44 100644
--- a/sound/pci/au88x0/au88x0.c
+++ b/sound/pci/au88x0/au88x0.c
@@ -48,11 +48,10 @@ static void vortex_fix_latency(struct pci_dev *vortex)
 {
 	int rc;
 	if (!(rc = pci_write_config_byte(vortex, 0x40, 0xff))) {
-			pr_info( CARD_NAME
-			       ": vortex latency is 0xff\n");
+			dev_info(&vortex->dev, "vortex latency is 0xff\n");
 	} else {
-		pr_warn( CARD_NAME
-				": could not set vortex latency: pci error 0x%x\n", rc);
+		dev_warn(&vortex->dev,
+			 "could not set vortex latency: pci error 0x%x\n", rc);
 	}
 }
 
@@ -70,11 +69,10 @@ static void vortex_fix_agp_bridge(struct pci_dev *via)
 	if (!(rc = pci_read_config_byte(via, 0x42, &value))
 			&& ((value & 0x10)
 				|| !(rc = pci_write_config_byte(via, 0x42, value | 0x10)))) {
-		pr_info( CARD_NAME
-				": bridge config is 0x%x\n", value | 0x10);
+		dev_info(&via->dev, "bridge config is 0x%x\n", value | 0x10);
 	} else {
-		pr_warn( CARD_NAME
-				": could not set vortex latency: pci error 0x%x\n", rc);
+		dev_warn(&via->dev,
+			 "could not set vortex latency: pci error 0x%x\n", rc);
 	}
 }
 
@@ -97,7 +95,8 @@ static void snd_vortex_workaround(struct pci_dev *vortex, int fix)
 					PCI_DEVICE_ID_AMD_FE_GATE_7007, NULL);
 		}
 		if (via) {
-			pr_info( CARD_NAME ": Activating latency workaround...\n");
+			dev_info(&vortex->dev,
+				 "Activating latency workaround...\n");
 			vortex_fix_latency(vortex);
 			vortex_fix_agp_bridge(via);
 		}
@@ -153,7 +152,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip)
 		return err;
 	if (pci_set_dma_mask(pci, DMA_BIT_MASK(32)) < 0 ||
 	    pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)) < 0) {
-		pr_err( "error to set DMA mask\n");
+		dev_err(card->dev, "error to set DMA mask\n");
 		pci_disable_device(pci);
 		return -ENXIO;
 	}
@@ -182,7 +181,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip)
 
 	chip->mmio = pci_ioremap_bar(pci, 0);
 	if (!chip->mmio) {
-		pr_err( "MMIO area remap failed.\n");
+		dev_err(card->dev, "MMIO area remap failed.\n");
 		err = -ENOMEM;
 		goto ioremap_out;
 	}
@@ -191,14 +190,14 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip)
 	 * This must be done before we do request_irq otherwise we can get spurious
 	 * interrupts that we do not handle properly and make a mess of things */
 	if ((err = vortex_core_init(chip)) != 0) {
-		pr_err( "hw core init failed\n");
+		dev_err(card->dev, "hw core init failed\n");
 		goto core_out;
 	}
 
 	if ((err = request_irq(pci->irq, vortex_interrupt,
 			       IRQF_SHARED, KBUILD_MODNAME,
 	                       chip)) != 0) {
-		pr_err( "cannot grab irq\n");
+		dev_err(card->dev, "cannot grab irq\n");
 		goto irq_out;
 	}
 	chip->irq = pci->irq;
@@ -342,11 +341,11 @@ snd_vortex_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 	chip->rev = pci->revision;
 #ifdef CHIP_AU8830
 	if ((chip->rev) != 0xfe && (chip->rev) != 0xfa) {
-		pr_alert(
-		       "vortex: The revision (%x) of your card has not been seen before.\n",
+		dev_alert(card->dev,
+			  "The revision (%x) of your card has not been seen before.\n",
 		       chip->rev);
-		pr_alert(
-		       "vortex: Please email the results of 'lspci -vv' to openvortex-dev@nongnu.org.\n");
+		dev_alert(card->dev,
+			  "Please email the results of 'lspci -vv' to openvortex-dev@nongnu.org.\n");
 		snd_card_free(card);
 		err = -ENODEV;
 		return err;