vmlfb: framebuffer driver for Intel Vermilion Range

Add the Intel Vermilion Range framebuffer support.

Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 287 insertions, 0 deletions

diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
new file mode 100644
index 000000000000..e9bbc3455c94
--- /dev/null
+++ b/drivers/video/backlight/cr_bllcd.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright (c) Intel Corp. 2007.
+ * All Rights Reserved.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ * This file is part of the Carillo Ranch video subsystem driver.
+ * The Carillo Ranch video subsystem driver is free software;
+ * you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The Carillo Ranch video subsystem driver is distributed
+ * in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * Authors:
+ *   Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ *   Alan Hourihane <alanh-at-tungstengraphics-dot-com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+#include <linux/pci.h>
+#include <asm/uaccess.h>
+
+/* The LVDS- and panel power controls sits on the
+ * GPIO port of the ISA bridge.
+ */
+
+#define CRVML_DEVICE_LPC    0x27B8
+#define CRVML_REG_GPIOBAR   0x48
+#define CRVML_REG_GPIOEN    0x4C
+#define CRVML_GPIOEN_BIT    (1 << 4)
+#define CRVML_PANEL_PORT    0x38
+#define CRVML_LVDS_ON       0x00000001
+#define CRVML_PANEL_ON      0x00000002
+#define CRVML_BACKLIGHT_OFF 0x00000004
+
+/* The PLL Clock register sits on Host bridge */
+#define CRVML_DEVICE_MCH   0x5001
+#define CRVML_REG_MCHBAR   0x44
+#define CRVML_REG_MCHEN    0x54
+#define CRVML_MCHEN_BIT    (1 << 28)
+#define CRVML_MCHMAP_SIZE  4096
+#define CRVML_REG_CLOCK    0xc3c
+#define CRVML_CLOCK_SHIFT  8
+#define CRVML_CLOCK_MASK   0x00000f00
+
+static struct pci_dev *lpc_dev;
+static u32 gpio_bar;
+
+struct cr_panel {
+	struct backlight_device *cr_backlight_device;
+	struct lcd_device *cr_lcd_device;
+};
+
+static int cr_backlight_set_intensity(struct backlight_device *bd)
+{
+	int intensity = bd->props.brightness;
+	u32 addr = gpio_bar + CRVML_PANEL_PORT;
+	u32 cur = inl(addr);
+
+	if (bd->props.power == FB_BLANK_UNBLANK)
+		intensity = FB_BLANK_UNBLANK;
+	if (bd->props.fb_blank == FB_BLANK_UNBLANK)
+		intensity = FB_BLANK_UNBLANK;
+	if (bd->props.power == FB_BLANK_POWERDOWN)
+		intensity = FB_BLANK_POWERDOWN;
+	if (bd->props.fb_blank == FB_BLANK_POWERDOWN)
+		intensity = FB_BLANK_POWERDOWN;
+
+	if (intensity == FB_BLANK_UNBLANK) { /* FULL ON */
+		cur &= ~CRVML_BACKLIGHT_OFF;
+		outl(cur, addr);
+	} else if (intensity == FB_BLANK_POWERDOWN) { /* OFF */
+		cur |= CRVML_BACKLIGHT_OFF;
+		outl(cur, addr);
+	} /* anything else, don't bother */
+
+	return 0;
+}
+
+static int cr_backlight_get_intensity(struct backlight_device *bd)
+{
+	u32 addr = gpio_bar + CRVML_PANEL_PORT;
+	u32 cur = inl(addr);
+	u8 intensity;
+
+	if (cur & CRVML_BACKLIGHT_OFF)
+		intensity = FB_BLANK_POWERDOWN;
+	else
+		intensity = FB_BLANK_UNBLANK;
+
+	return intensity;
+}
+
+static struct backlight_ops cr_backlight_ops = {
+	.get_brightness = cr_backlight_get_intensity,
+	.update_status = cr_backlight_set_intensity,
+};
+
+static void cr_panel_on(void)
+{
+	u32 addr = gpio_bar + CRVML_PANEL_PORT;
+	u32 cur = inl(addr);
+
+	if (!(cur & CRVML_PANEL_ON)) {
+		/* Make sure LVDS controller is down. */
+		if (cur & 0x00000001) {
+			cur &= ~CRVML_LVDS_ON;
+			outl(cur, addr);
+		}
+		/* Power up Panel */
+		schedule_timeout(HZ / 10);
+		cur |= CRVML_PANEL_ON;
+		outl(cur, addr);
+	}
+
+	/* Power up LVDS controller */
+
+	if (!(cur & CRVML_LVDS_ON)) {
+		schedule_timeout(HZ / 10);
+		outl(cur | CRVML_LVDS_ON, addr);
+	}
+}
+
+static void cr_panel_off(void)
+{
+	u32 addr = gpio_bar + CRVML_PANEL_PORT;
+	u32 cur = inl(addr);
+
+	/* Power down LVDS controller first to avoid high currents */
+	if (cur & CRVML_LVDS_ON) {
+		cur &= ~CRVML_LVDS_ON;
+		outl(cur, addr);
+	}
+	if (cur & CRVML_PANEL_ON) {
+		schedule_timeout(HZ / 10);
+		outl(cur & ~CRVML_PANEL_ON, addr);
+	}
+}
+
+static int cr_lcd_set_power(struct lcd_device *ld, int power)
+{
+	if (power == FB_BLANK_UNBLANK)
+		cr_panel_on();
+	if (power == FB_BLANK_POWERDOWN)
+		cr_panel_off();
+
+	return 0;
+}
+
+static struct lcd_ops cr_lcd_ops = {
+	.set_power = cr_lcd_set_power,
+};
+
+static int cr_backlight_probe(struct platform_device *pdev)
+{
+	struct cr_panel *crp;
+	u8 dev_en;
+
+	crp = kzalloc(sizeof(crp), GFP_KERNEL);
+	if (crp == NULL)
+		return -ENOMEM;
+
+	lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					CRVML_DEVICE_LPC, NULL);
+	if (!lpc_dev) {
+		printk("INTEL CARILLO RANCH LPC not found.\n");
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en);
+	if (!(dev_en & CRVML_GPIOEN_BIT)) {
+		printk(KERN_ERR
+		       "Carillo Ranch GPIO device was not enabled.\n");
+		pci_dev_put(lpc_dev);
+		return -ENODEV;
+	}
+
+	crp->cr_backlight_device = backlight_device_register("cr-backlight",
+							     &pdev->dev, NULL,
+							     &cr_backlight_ops);
+	if (IS_ERR(crp->cr_backlight_device)) {
+		pci_dev_put(lpc_dev);
+		return PTR_ERR(crp->cr_backlight_device);
+	}
+
+	crp->cr_lcd_device = lcd_device_register("cr-lcd",
+							&pdev->dev,
+							&cr_lcd_ops);
+
+	if (IS_ERR(crp->cr_lcd_device)) {
+		pci_dev_put(lpc_dev);
+		return PTR_ERR(crp->cr_backlight_device);
+	}
+
+	pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR,
+			      &gpio_bar);
+	gpio_bar &= ~0x3F;
+
+	crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
+	crp->cr_backlight_device->props.brightness = 0;
+	crp->cr_backlight_device->props.max_brightness = 0;
+	cr_backlight_set_intensity(crp->cr_backlight_device);
+
+	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK);
+
+	platform_set_drvdata(pdev, crp);
+
+	return 0;
+}
+
+static int cr_backlight_remove(struct platform_device *pdev)
+{
+	struct cr_panel *crp = platform_get_drvdata(pdev);
+	crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN;
+	crp->cr_backlight_device->props.brightness = 0;
+	crp->cr_backlight_device->props.max_brightness = 0;
+	cr_backlight_set_intensity(crp->cr_backlight_device);
+	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN);
+	backlight_device_unregister(crp->cr_backlight_device);
+	lcd_device_unregister(crp->cr_lcd_device);
+	pci_dev_put(lpc_dev);
+
+	return 0;
+}
+
+static struct platform_driver cr_backlight_driver = {
+	.probe = cr_backlight_probe,
+	.remove = cr_backlight_remove,
+	.driver = {
+		   .name = "cr_backlight",
+		   },
+};
+
+static struct platform_device *crp;
+
+static int __init cr_backlight_init(void)
+{
+	int ret = platform_driver_register(&cr_backlight_driver);
+
+	if (!ret) {
+		crp = platform_device_alloc("cr_backlight", -1);
+		if (!crp)
+			return -ENOMEM;
+
+		ret = platform_device_add(crp);
+
+		if (ret) {
+			platform_device_put(crp);
+			platform_driver_unregister(&cr_backlight_driver);
+		}
+	}
+
+	printk("Carillo Ranch Backlight Driver Initialized.\n");
+
+	return ret;
+}
+
+static void __exit cr_backlight_exit(void)
+{
+	platform_device_unregister(crp);
+	platform_driver_unregister(&cr_backlight_driver);
+}
+
+module_init(cr_backlight_init);
+module_exit(cr_backlight_exit);
+
+MODULE_AUTHOR("Tungsten Graphics Inc.");
+MODULE_DESCRIPTION("Carillo Ranch Backlight Driver");
+MODULE_LICENSE("GPL");