summaryrefslogtreecommitdiff
path: root/drivers/net/can/c_can
diff options
context:
space:
mode:
authorOliver Hartkopp <socketcan@hartkopp.net>2014-05-06 19:45:38 +0200
committerMarc Kleine-Budde <mkl@pengutronix.de>2014-05-19 09:03:06 +0200
commit524369e2391f4b422d0efdd11d526a373a11a43a (patch)
treef1180aaf9eefc32b958f1a9e955e646df02a1d22 /drivers/net/can/c_can
parent4f337ed5c014752b000f593182fdcfa3ecf0d166 (diff)
can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option
In 2b9aecdce2 ("can: c_can: Disable rx split as workaround") a new Kconfig option was introduced as a workaround. The tests performed by Alexander Stein confirmed this option to be obsolete with all the other cleanups and fixes that had been discussed that time: http://marc.info/?l=linux-can&m=139746476821294&w=2 Both (author and tester) agreed to remove this Kconfig option again: http://marc.info/?l=linux-can&m=139883820714229&w=2 As some more cleanups took place since then a simple revert is not possible. This patch removes the entire option as it would behave when disabled. Further beautification’s can be done later. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can/c_can')
-rw-r--r--drivers/net/can/c_can/Kconfig7
-rw-r--r--drivers/net/can/c_can/c_can.c36
2 files changed, 0 insertions, 43 deletions
diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig
index 8ab7103d4f44..61ffc12d8fd8 100644
--- a/drivers/net/can/c_can/Kconfig
+++ b/drivers/net/can/c_can/Kconfig
@@ -14,13 +14,6 @@ config CAN_C_CAN_PLATFORM
SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
boards like am335x, dm814x, dm813x and dm811x.
-config CAN_C_CAN_STRICT_FRAME_ORDERING
- bool "Force a strict RX CAN frame order (may cause frame loss)"
- ---help---
- The RX split buffer prevents packet reordering but can cause packet
- loss. Only enable this option when you accept to lose CAN frames
- in favour of getting the received CAN frames in the correct order.
-
config CAN_C_CAN_PCI
tristate "Generic PCI Bus based C_CAN/D_CAN driver"
depends on PCI
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index a2ca820b5373..95e04e2002da 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -732,26 +732,12 @@ static u32 c_can_adjust_pending(u32 pend)
static inline void c_can_rx_object_get(struct net_device *dev,
struct c_can_priv *priv, u32 obj)
{
-#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING
- if (obj < C_CAN_MSG_RX_LOW_LAST)
- c_can_object_get(dev, IF_RX, obj, IF_COMM_RCV_LOW);
- else
-#endif
c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
}
static inline void c_can_rx_finalize(struct net_device *dev,
struct c_can_priv *priv, u32 obj)
{
-#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING
- if (obj < C_CAN_MSG_RX_LOW_LAST)
- priv->rxmasked |= BIT(obj - 1);
- else if (obj == C_CAN_MSG_RX_LOW_LAST) {
- priv->rxmasked = 0;
- /* activate all lower message objects */
- c_can_activate_all_lower_rx_msg_obj(dev, IF_RX);
- }
-#endif
if (priv->type != BOSCH_D_CAN)
c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT);
}
@@ -799,9 +785,6 @@ static inline u32 c_can_get_pending(struct c_can_priv *priv)
{
u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
-#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING
- pend &= ~priv->rxmasked;
-#endif
return pend;
}
@@ -814,25 +797,6 @@ static inline u32 c_can_get_pending(struct c_can_priv *priv)
* has arrived. To work-around this issue, we keep two groups of message
* objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT.
*
- * If CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING = y
- *
- * To ensure in-order frame reception we use the following
- * approach while re-activating a message object to receive further
- * frames:
- * - if the current message object number is lower than
- * C_CAN_MSG_RX_LOW_LAST, do not clear the NEWDAT bit while clearing
- * the INTPND bit.
- * - if the current message object number is equal to
- * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of all lower
- * receive message objects.
- * - if the current message object number is greater than
- * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of
- * only this message object.
- *
- * This can cause packet loss!
- *
- * If CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING = n
- *
* We clear the newdat bit right away.
*
* This can result in packet reordering when the readout is slow.