summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorShawn Guo <shawn.guo@linaro.org>2011-11-10 16:39:32 +0800
committerSascha Hauer <s.hauer@pengutronix.de>2011-11-11 16:53:35 +0100
commitf750ba9b8db2a926c315ccfa9e95d12fe4590a22 (patch)
tree1bdd2ce107b6a39b4797dab955a003e7a9c1e0ba /arch
parent1b929995ebc0f00cc56ddc14cf75a875f4d565d6 (diff)
arm/imx: fix imx6q mmc error when mounting rootfs
The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-imx/clock-imx6q.c17
1 files changed, 16 insertions, 1 deletions
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index e0b926dfeced..613a1b993bff 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1139,7 +1139,7 @@ static int _clk_set_rate(struct clk *clk, unsigned long rate)
return -EINVAL;
max_div = ((d->bm_pred >> d->bp_pred) + 1) *
- ((d->bm_pred >> d->bp_pred) + 1);
+ ((d->bm_podf >> d->bp_podf) + 1);
div = parent_rate / rate;
if (div == 0)
@@ -2002,6 +2002,21 @@ int __init mx6q_clocks_init(void)
clk_set_rate(&asrc_serial_clk, 1500000);
clk_set_rate(&enfc_clk, 11000000);
+ /*
+ * Before pinctrl API is available, we have to rely on the pad
+ * configuration set up by bootloader. For usdhc example here,
+ * u-boot sets up the pads for 49.5 MHz case, and we have to lower
+ * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
+ *
+ * FIXME: This is should be removed after pinctrl API is available.
+ * At that time, usdhc driver can call pinctrl API to change pad
+ * configuration dynamically per different usdhc clock settings.
+ */
+ clk_set_rate(&usdhc1_clk, 49500000);
+ clk_set_rate(&usdhc2_clk, 49500000);
+ clk_set_rate(&usdhc3_clk, 49500000);
+ clk_set_rate(&usdhc4_clk, 49500000);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);