Merge branch 'i2c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - API for late atomic transfers (e.g. to shut down via PMIC). We have a
   seperate callback now which is called under clearly defined
   conditions. In-kernel users are converted, too.

 - new driver for the AMD PCIe MP2 I2C controller

 - large refactoring for at91 and bcm-iproc (both gain slave support due
   to this)

 - and a good share of various driver improvements anf fixes

* 'i2c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (57 commits)
  dt-bindings: i2c: riic: document r7s9210 support
  i2c: imx-lpi2c: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  i2c-piix4: Add Hygon Dhyana SMBus support
  i2c: core: apply 'is_suspended' check for SMBus, too
  i2c: core: ratelimit 'transfer when suspended' errors
  i2c: iproc: Change driver to use 'BIT' macro
  i2c: riic: Add Runtime PM support
  i2c: mux: demux-pinctrl: use struct_size() in devm_kzalloc()
  i2c: mux: pca954x: allow management of device idle state via sysfs
  i2c: mux: pca9541: remove support for unused platform data
  i2c: mux: pca954x: remove support for unused platform data
  dt-bindings: i2c: i2c-mtk: add support for MT8516
  i2c: axxia: use auto cmd for last message
  i2c: gpio: flag atomic capability if possible
  i2c: algo: bit: add flag to whitelist atomic transfers
  i2c: stu300: use xfer_atomic callback to bail out early
  i2c: ocores: enable atomic xfers
  i2c: ocores: refactor setup for polling
  i2c: tegra-bpmp: convert to use new atomic callbacks
  i2c: omap: Add the master_xfer_atomic hook
  ...

9 files changed, 95 insertions, 24 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x b/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x
new file mode 100644
index 000000000000..0b0de8cd0d13
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x
@@ -0,0 +1,20 @@
+What:		/sys/bus/i2c/.../idle_state
+Date:		January 2019
+KernelVersion:	5.2
+Contact:	Robert Shearman <robert.shearman@att.com>
+Description:
+		Value that exists only for mux devices that can be
+		written to control the behaviour of the multiplexer on
+		idle. Possible values:
+		-2 - disconnect on idle, i.e. deselect the last used
+		     channel, which is useful when there is a device
+		     with an address that conflicts with another
+		     device on another mux on the same parent bus.
+		-1 - leave the mux as-is, which is the most optimal
+		     setting in terms of I2C operations and is the
+		     default mode.
+		0..<nchans> - set the mux to a predetermined channel,
+		     which is useful if there is one channel that is
+		     used almost always, and you want to reduce the
+		     latency for normal operations after rare
+		     transactions on other channels
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
index 0e456bbc1213..22aead844d0f 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ b/Documentation/devicetree/bindings/eeprom/at24.txt
@@ -50,6 +50,7 @@ Required properties:
 
                 "nxp,se97b" - the fallback is "atmel,24c02",
                 "renesas,r1ex24002" - the fallback is "atmel,24c02"
+                "renesas,r1ex24016" - the fallback is "atmel,24c16"
                 "renesas,r1ex24128" - the fallback is "atmel,24c128"
                 "rohm,br24t01" - the fallback is "atmel,24c01"
 
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
index 81f982ccca31..d12cc33cca6c 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
@@ -3,15 +3,12 @@ Broadcom iProc I2C controller
 Required properties:
 
 - compatible:
-    Must be "brcm,iproc-i2c"
+    Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
 
 - reg:
     Define the base and range of the I/O address space that contain the iProc
     I2C controller registers
 
-- interrupts:
-    Should contain the I2C interrupt
-
 - clock-frequency:
     This is the I2C bus clock. Need to be either 100000 or 400000
 
@@ -21,6 +18,18 @@ Required properties:
 - #size-cells:
     Always 0
 
+Optional properties:
+
+- interrupts:
+    Should contain the I2C interrupt. For certain revisions of the I2C
+    controller, I2C interrupt is unwired to the interrupt controller. In such
+    case, this property should be left unspecified, and driver will fall back
+    to polling mode
+
+- brcm,ape-hsls-addr-mask:
+    Required for "brcm,iproc-nic-i2c". Host view of address mask into the
+    'APE' co-processor. Value must be unsigned, 32-bit
+
 Example:
 	i2c0: i2c@18008000 {
 		compatible = "brcm,iproc-i2c";
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index 3e4bcc2fb6f7..08be4d3846e5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -6,12 +6,21 @@ Required properties :
                 or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
  - reg : Offset and length of the register set for the device
  - interrupts : <IRQ> where IRQ is the interrupt number.
+ - clocks : phandles for the clocks, see the description of clock-names below.
+   The phandle for the "ic_clk" clock is required. The phandle for the "pclk"
+   clock is optional. If a single clock is specified but no clock-name, it is
+   the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first.
 
 Recommended properties :
 
  - clock-frequency : desired I2C bus clock frequency in Hz.
 
 Optional properties :
+
+ - clock-names : Contains the names of the clocks:
+    "ic_clk", for the core clock used to generate the external I2C clock.
+    "pclk", the interface clock, required for register access.
+
  - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
    time, named ICPU_CFG:TWI_DELAY in the datasheet.
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
index ee4c32454198..68f6d73a8b73 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
@@ -12,13 +12,16 @@ Required properties:
       "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
       "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
       "mediatek,mt8173-i2c": for MediaTek MT8173
+      "mediatek,mt8183-i2c": for MediaTek MT8183
+      "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
   - interrupts: interrupt number to the cpu.
   - clock-div: the fixed value for frequency divider of clock source in i2c
     module. Each IC may be different.
   - clocks: clock name from clock manager
-  - clock-names: Must include "main" and "dma", if enable have-pmic need include
+  - clock-names: Must include "main" and "dma", "arb" is for multi-master that
+    one bus has more than two i2c controllers, if enable have-pmic need include
     "pmic" extra.
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-riic.txt b/Documentation/devicetree/bindings/i2c/i2c-riic.txt
index 0bcc4716c319..e26fe3ad86a9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-riic.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-riic.txt
@@ -1,7 +1,10 @@
 Device tree configuration for Renesas RIIC driver
 
 Required properties:
-- compatible      : "renesas,riic-<soctype>". "renesas,riic-rz" as fallback
+- compatible      :
+	"renesas,riic-r7s72100" if the device is a part of a R7S72100 SoC.
+	"renesas,riic-r7s9210" if the device is a part of a R7S9210 SoC.
+	"renesas,riic-rz" for a generic RZ/A compatible device.
 - reg             : address start and address range size of device
 - interrupts      : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI)
 - clock-frequency : frequency of bus clock in Hz
diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
index 69240e189b01..f334738f7a35 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
@@ -1,11 +1,11 @@
 * I2C controller embedded in STMicroelectronics STM32 I2C platform
 
-Required properties :
-- compatible : Must be one of the following
+Required properties:
+- compatible: Must be one of the following
   - "st,stm32f4-i2c"
   - "st,stm32f7-i2c"
-- reg : Offset and length of the register set for the device
-- interrupts : Must contain the interrupt id for I2C event and then the
+- reg: Offset and length of the register set for the device
+- interrupts: Must contain the interrupt id for I2C event and then the
   interrupt id for I2C error.
 - resets: Must contain the phandle to the reset controller.
 - clocks: Must contain the input clock of the I2C instance.
@@ -14,25 +14,26 @@ Required properties :
 - #address-cells = <1>;
 - #size-cells = <0>;
 
-Optional properties :
-- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+Optional properties:
+- clock-frequency: Desired I2C bus clock frequency in Hz. If not specified,
   the default 100 kHz frequency will be used.
   For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are
   100000 and 400000.
-  For STM32F7 SoC, Standard-mode, Fast-mode and Fast-mode Plus are supported,
-  possible values are 100000, 400000 and 1000000.
-- i2c-scl-rising-time-ns : Only for STM32F7, I2C SCL Rising time for the board
-  (default: 25)
-- i2c-scl-falling-time-ns : Only for STM32F7, I2C SCL Falling time for the board
-  (default: 10)
+  For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode
+  Plus are supported, possible values are 100000, 400000 and 1000000.
+- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25)
+  For STM32F7, STM32H7 and STM32MP1 only.
+- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10)
+  For STM32F7, STM32H7 and STM32MP1 only.
   I2C Timings are derived from these 2 values
-- st,syscfg-fmp:  Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
-  whether Fast Mode Plus speed is selected by slave.
-	1st cell : phandle to syscfg
-	2nd cell : register offset within SYSCFG
-	3rd cell : register bitmask for FMP bit
+- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
+  Plus speed is selected by slave.
+	1st cell: phandle to syscfg
+	2nd cell: register offset within SYSCFG
+	3rd cell: register bitmask for FMP bit
+  For STM32F7, STM32H7 and STM32MP1 only.
 
-Example :
+Example:
 
 	i2c@40005400 {
 		compatible = "st,stm32f4-i2c";
diff --git a/Documentation/i2c/busses/i2c-amd-mp2 b/Documentation/i2c/busses/i2c-amd-mp2
new file mode 100644
index 000000000000..6571487171f4
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-amd-mp2
@@ -0,0 +1,23 @@
+Kernel driver i2c-amd-mp2
+
+Supported adapters:
+  * AMD MP2 PCIe interface
+
+Datasheet: not publicly available.
+
+Authors:
+	Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+	Nehal Shah <nehal-bakulchandra.shah@amd.com>
+	Elie Morisse <syniurge@gmail.com>
+
+Description
+-----------
+
+The MP2 is an ARM processor programmed as an I2C controller and communicating
+with the x86 host through PCI.
+
+If you see something like this:
+
+03:00.7 MP2 I2C controller: Advanced Micro Devices, Inc. [AMD] Device 15e6
+
+in your 'lspci -v', then this driver is for your device.
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index aa959fd22450..2703bc3acad0 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -15,6 +15,8 @@ Supported adapters:
     http://support.amd.com/us/Embedded_TechDocs/44413.pdf
   * AMD Hudson-2, ML, CZ
     Datasheet: Not publicly available
+  * Hygon CZ
+    Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com