isdn: gigaset: remove i4l support

isdn4linux is getting removed, and the gigaset driver can still
use the CAPI support, so this can all go away.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

4 files changed, 15 insertions, 735 deletions

diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 9b1ce277ca3d..f6184b637182 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -48,9 +48,8 @@ GigaSet 307x Device Driver
 
 1.2. Software
      --------
-     The driver works with the Kernel CAPI subsystem as well as the old
-     ISDN4Linux subsystem, so it can be used with any software which is able
-     to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data).
+     The driver works with the Kernel CAPI subsystem and can be used with any
+     software which is able to use CAPI 2.0 for ISDN connections (voice or data).
 
      There are some user space tools available at
      https://sourceforge.net/projects/gigaset307x/
@@ -92,7 +91,7 @@ GigaSet 307x Device Driver
 	gigaset	 	debug	   debug level (see section 3.2.)
 
 			startmode  initial operation mode (see section 2.5.):
-	bas_gigaset )		   1=ISDN4linux/CAPI (default), 0=Unimodem
+	bas_gigaset )		   1=CAPI (default), 0=Unimodem
 	ser_gigaset )
 	usb_gigaset )	cidmode    initial Call-ID mode setting (see section
 				   2.5.): 1=on (default), 0=off
@@ -154,18 +153,10 @@ GigaSet 307x Device Driver
 
 2.3. CAPI
      ----
-     If the driver is compiled with CAPI support (kernel configuration option
-     GIGASET_CAPI) the devices will show up as CAPI controllers as soon as the
-     corresponding driver module is loaded, and can then be used with CAPI 2.0
-     kernel and user space applications. For user space access, the module
-     capi.ko must be loaded.
-
-     Legacy ISDN4Linux applications are supported via the capidrv
-     compatibility driver. The kernel module capidrv.ko must be loaded
-     explicitly with the command
-        modprobe capidrv
-     if needed, and cannot be unloaded again without unloading the driver
-     first. (These are limitations of capidrv.)
+     The devices will show up as CAPI controllers as soon as the
+     corresponding driver module is loaded, and can then be used with
+     CAPI 2.0 kernel and user space applications. For user space access,
+     the module capi.ko must be loaded.
 
      Most distributions handle loading and unloading of the various CAPI
      modules automatically via the command capiinit(1) from the capi4k-utils
@@ -173,16 +164,6 @@ GigaSet 307x Device Driver
      Gigaset drivers because it doesn't support more than one module per
      driver.
 
-2.4. ISDN4Linux
-     ----------
-     If the driver is compiled without CAPI support (native ISDN4Linux
-     variant), it registers the device with the legacy ISDN4Linux subsystem
-     after loading the module. It can then be used with ISDN4Linux
-     applications only. Most distributions provide some configuration utility
-     for setting up that subsystem. Otherwise you can use some HOWTOs like
-         http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
-
-
 2.5. Unimodem mode
      -------------
      In this mode the device works like a modem connected to a serial port
@@ -281,8 +262,7 @@ GigaSet 307x Device Driver
      number. Dialing "***" (three asterisks) calls all extensions
      simultaneously (global call).
 
-     This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode
-     does not support internal calls.
+     Unimodem mode does not support internal calls.
 
 2.8. Unregistered Wireless Devices (M101/M105)
      -----------------------------------------
diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig
index fe41e9cfb672..c593105b3600 100644
--- a/drivers/isdn/gigaset/Kconfig
+++ b/drivers/isdn/gigaset/Kconfig
@@ -30,15 +30,6 @@ config GIGASET_CAPI
 	  Say N to build the old native ISDN4Linux variant.
 	  If unsure, say Y.
 
-config GIGASET_I4L
-	bool
-	depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
-	default !GIGASET_CAPI
-
-config GIGASET_DUMMYLL
-	bool
-	default !GIGASET_CAPI&&!GIGASET_I4L
-
 config GIGASET_BASE
 	tristate "Gigaset base station support"
 	depends on USB
diff --git a/drivers/isdn/gigaset/Makefile b/drivers/isdn/gigaset/Makefile
index ac45a2739f56..9c010891dcd7 100644
--- a/drivers/isdn/gigaset/Makefile
+++ b/drivers/isdn/gigaset/Makefile
@@ -1,8 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0
 gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o
-gigaset-$(CONFIG_GIGASET_CAPI) += capi.o
-gigaset-$(CONFIG_GIGASET_I4L) += i4l.o
-gigaset-$(CONFIG_GIGASET_DUMMYLL) += dummyll.o
+
+ifdef CONFIG_GIGASET_CAPI
+gigaset-y += capi.o
+else
+gigaset-y += dummyll.o
+endif
+
 usb_gigaset-y := usb-gigaset.o
 ser_gigaset-y := ser-gigaset.o
 bas_gigaset-y := bas-gigaset.o isocdata.o
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
deleted file mode 100644
index b5b389e95edd..000000000000
--- a/drivers/isdn/gigaset/i4l.c
+++ /dev/null
@@ -1,695 +0,0 @@
-/*
- * Stuff used by all variants of the driver
- *
- * Copyright (c) 2001 by Stefan Eilers,
- *                       Hansjoerg Lipp <hjlipp@web.de>,
- *                       Tilman Schmidt <tilman@imap.cc>.
- *
- * =====================================================================
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/isdnif.h>
-#include <linux/export.h>
-
-#define SBUFSIZE	4096	/* sk_buff payload size */
-#define TRANSBUFSIZE	768	/* bytes per skb for transparent receive */
-#define HW_HDR_LEN	2	/* Header size used to store ack info */
-#define MAX_BUF_SIZE	(SBUFSIZE - HW_HDR_LEN)	/* max data packet from LL */
-
-/* == Handling of I4L IO =====================================================*/
-
-/* writebuf_from_LL
- * called by LL to transmit data on an open channel
- * inserts the buffer data into the send queue and starts the transmission
- * Note that this operation must not sleep!
- * When the buffer is processed completely, gigaset_skb_sent() should be called.
- * parameters:
- *	driverID	driver ID as assigned by LL
- *	channel		channel number
- *	ack		if != 0 LL wants to be notified on completion via
- *			statcallb(ISDN_STAT_BSENT)
- *	skb		skb containing data to send
- * return value:
- *	number of accepted bytes
- *	0 if temporarily unable to accept data (out of buffer space)
- *	<0 on error (eg. -EINVAL)
- */
-static int writebuf_from_LL(int driverID, int channel, int ack,
-			    struct sk_buff *skb)
-{
-	struct cardstate *cs = gigaset_get_cs_by_id(driverID);
-	struct bc_state *bcs;
-	unsigned char *ack_header;
-	unsigned len;
-
-	if (!cs) {
-		pr_err("%s: invalid driver ID (%d)\n", __func__, driverID);
-		return -ENODEV;
-	}
-	if (channel < 0 || channel >= cs->channels) {
-		dev_err(cs->dev, "%s: invalid channel ID (%d)\n",
-			__func__, channel);
-		return -ENODEV;
-	}
-	bcs = &cs->bcs[channel];
-
-	/* can only handle linear sk_buffs */
-	if (skb_linearize(skb) < 0) {
-		dev_err(cs->dev, "%s: skb_linearize failed\n", __func__);
-		return -ENOMEM;
-	}
-	len = skb->len;
-
-	gig_dbg(DEBUG_LLDATA,
-		"Receiving data from LL (id: %d, ch: %d, ack: %d, sz: %d)",
-		driverID, channel, ack, len);
-
-	if (!len) {
-		if (ack)
-			dev_notice(cs->dev, "%s: not ACKing empty packet\n",
-				   __func__);
-		return 0;
-	}
-	if (len > MAX_BUF_SIZE) {
-		dev_err(cs->dev, "%s: packet too large (%d bytes)\n",
-			__func__, len);
-		return -EINVAL;
-	}
-
-	/* set up acknowledgement header */
-	if (skb_headroom(skb) < HW_HDR_LEN) {
-		/* should never happen */
-		dev_err(cs->dev, "%s: insufficient skb headroom\n", __func__);
-		return -ENOMEM;
-	}
-	skb_set_mac_header(skb, -HW_HDR_LEN);
-	skb->mac_len = HW_HDR_LEN;
-	ack_header = skb_mac_header(skb);
-	if (ack) {
-		ack_header[0] = len & 0xff;
-		ack_header[1] = len >> 8;
-	} else {
-		ack_header[0] = ack_header[1] = 0;
-	}
-	gig_dbg(DEBUG_MCMD, "skb: len=%u, ack=%d: %02x %02x",
-		len, ack, ack_header[0], ack_header[1]);
-
-	/* pass to device-specific module */
-	return cs->ops->send_skb(bcs, skb);
-}
-
-/**
- * gigaset_skb_sent() - acknowledge sending an skb
- * @bcs:	B channel descriptor structure.
- * @skb:	sent data.
- *
- * Called by hardware module {bas,ser,usb}_gigaset when the data in a
- * skb has been successfully sent, for signalling completion to the LL.
- */
-void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
-{
-	isdn_if *iif = bcs->cs->iif;
-	unsigned char *ack_header = skb_mac_header(skb);
-	unsigned len;
-	isdn_ctrl response;
-
-	++bcs->trans_up;
-
-	if (skb->len)
-		dev_warn(bcs->cs->dev, "%s: skb->len==%d\n",
-			 __func__, skb->len);
-
-	len = ack_header[0] + ((unsigned) ack_header[1] << 8);
-	if (len) {
-		gig_dbg(DEBUG_MCMD, "ACKing to LL (id: %d, ch: %d, sz: %u)",
-			bcs->cs->myid, bcs->channel, len);
-
-		response.driver = bcs->cs->myid;
-		response.command = ISDN_STAT_BSENT;
-		response.arg = bcs->channel;
-		response.parm.length = len;
-		iif->statcallb(&response);
-	}
-}
-EXPORT_SYMBOL_GPL(gigaset_skb_sent);
-
-/**
- * gigaset_skb_rcvd() - pass received skb to LL
- * @bcs:	B channel descriptor structure.
- * @skb:	received data.
- *
- * Called by hardware module {bas,ser,usb}_gigaset when user data has
- * been successfully received, for passing to the LL.
- * Warning: skb must not be accessed anymore!
- */
-void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
-{
-	isdn_if *iif = bcs->cs->iif;
-
-	iif->rcvcallb_skb(bcs->cs->myid, bcs->channel, skb);
-	bcs->trans_down++;
-}
-EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
-
-/**
- * gigaset_isdn_rcv_err() - signal receive error
- * @bcs:	B channel descriptor structure.
- *
- * Called by hardware module {bas,ser,usb}_gigaset when a receive error
- * has occurred, for signalling to the LL.
- */
-void gigaset_isdn_rcv_err(struct bc_state *bcs)
-{
-	isdn_if *iif = bcs->cs->iif;
-	isdn_ctrl response;
-
-	/* if currently ignoring packets, just count down */
-	if (bcs->ignore) {
-		bcs->ignore--;
-		return;
-	}
-
-	/* update statistics */
-	bcs->corrupted++;
-
-	/* error -> LL */
-	gig_dbg(DEBUG_CMD, "sending L1ERR");
-	response.driver = bcs->cs->myid;
-	response.command = ISDN_STAT_L1ERR;
-	response.arg = bcs->channel;
-	response.parm.errcode = ISDN_STAT_L1ERR_RECV;
-	iif->statcallb(&response);
-}
-EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
-
-/* This function will be called by LL to send commands
- * NOTE: LL ignores the returned value, for commands other than ISDN_CMD_IOCTL,
- * so don't put too much effort into it.
- */
-static int command_from_LL(isdn_ctrl *cntrl)
-{
-	struct cardstate *cs;
-	struct bc_state *bcs;
-	int retval = 0;
-	char **commands;
-	int ch;
-	int i;
-	size_t l;
-
-	gig_dbg(DEBUG_CMD, "driver: %d, command: %d, arg: 0x%lx",
-		cntrl->driver, cntrl->command, cntrl->arg);
-
-	cs = gigaset_get_cs_by_id(cntrl->driver);
-	if (cs == NULL) {
-		pr_err("%s: invalid driver ID (%d)\n", __func__, cntrl->driver);
-		return -ENODEV;
-	}
-	ch = cntrl->arg & 0xff;
-
-	switch (cntrl->command) {
-	case ISDN_CMD_IOCTL:
-		dev_warn(cs->dev, "ISDN_CMD_IOCTL not supported\n");
-		return -EINVAL;
-
-	case ISDN_CMD_DIAL:
-		gig_dbg(DEBUG_CMD,
-			"ISDN_CMD_DIAL (phone: %s, msn: %s, si1: %d, si2: %d)",
-			cntrl->parm.setup.phone, cntrl->parm.setup.eazmsn,
-			cntrl->parm.setup.si1, cntrl->parm.setup.si2);
-
-		if (ch >= cs->channels) {
-			dev_err(cs->dev,
-				"ISDN_CMD_DIAL: invalid channel (%d)\n", ch);
-			return -EINVAL;
-		}
-		bcs = cs->bcs + ch;
-		if (gigaset_get_channel(bcs) < 0) {
-			dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n");
-			return -EBUSY;
-		}
-		switch (bcs->proto2) {
-		case L2_HDLC:
-			bcs->rx_bufsize = SBUFSIZE;
-			break;
-		default:			/* assume transparent */
-			bcs->rx_bufsize = TRANSBUFSIZE;
-		}
-		dev_kfree_skb(bcs->rx_skb);
-		gigaset_new_rx_skb(bcs);
-
-		commands = kcalloc(AT_NUM, sizeof(*commands), GFP_ATOMIC);
-		if (!commands) {
-			gigaset_free_channel(bcs);
-			dev_err(cs->dev, "ISDN_CMD_DIAL: out of memory\n");
-			return -ENOMEM;
-		}
-
-		l = 3 + strlen(cntrl->parm.setup.phone);
-		commands[AT_DIAL] = kmalloc(l, GFP_ATOMIC);
-		if (!commands[AT_DIAL])
-			goto oom;
-		if (cntrl->parm.setup.phone[0] == '*' &&
-		    cntrl->parm.setup.phone[1] == '*') {
-			/* internal call: translate ** prefix to CTP value */
-			commands[AT_TYPE] = kstrdup("^SCTP=0\r", GFP_ATOMIC);
-			if (!commands[AT_TYPE])
-				goto oom;
-			snprintf(commands[AT_DIAL], l,
-				 "D%s\r", cntrl->parm.setup.phone + 2);
-		} else {
-			commands[AT_TYPE] = kstrdup("^SCTP=1\r", GFP_ATOMIC);
-			if (!commands[AT_TYPE])
-				goto oom;
-			snprintf(commands[AT_DIAL], l,
-				 "D%s\r", cntrl->parm.setup.phone);
-		}
-
-		l = strlen(cntrl->parm.setup.eazmsn);
-		if (l) {
-			l += 8;
-			commands[AT_MSN] = kmalloc(l, GFP_ATOMIC);
-			if (!commands[AT_MSN])
-				goto oom;
-			snprintf(commands[AT_MSN], l, "^SMSN=%s\r",
-				 cntrl->parm.setup.eazmsn);
-		}
-
-		switch (cntrl->parm.setup.si1) {
-		case 1:		/* audio */
-			/* BC = 9090A3: 3.1 kHz audio, A-law */
-			commands[AT_BC] = kstrdup("^SBC=9090A3\r", GFP_ATOMIC);
-			if (!commands[AT_BC])
-				goto oom;
-			break;
-		case 7:		/* data */
-		default:	/* hope the app knows what it is doing */
-			/* BC = 8890: unrestricted digital information */
-			commands[AT_BC] = kstrdup("^SBC=8890\r", GFP_ATOMIC);
-			if (!commands[AT_BC])
-				goto oom;
-		}
-		/* ToDo: other si1 values, inspect si2, set HLC/LLC */
-
-		commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC);
-		if (!commands[AT_PROTO])
-			goto oom;
-		snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
-
-		commands[AT_ISO] = kmalloc(9, GFP_ATOMIC);
-		if (!commands[AT_ISO])
-			goto oom;
-		snprintf(commands[AT_ISO], 9, "^SISO=%u\r",
-			 (unsigned) bcs->channel + 1);
-
-		if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands,
-				       bcs->at_state.seq_index, NULL)) {
-			for (i = 0; i < AT_NUM; ++i)
-				kfree(commands[i]);
-			kfree(commands);
-			gigaset_free_channel(bcs);
-			return -ENOMEM;
-		}
-		gigaset_schedule_event(cs);
-		break;
-	case ISDN_CMD_ACCEPTD:
-		gig_dbg(DEBUG_CMD, "ISDN_CMD_ACCEPTD");
-		if (ch >= cs->channels) {
-			dev_err(cs->dev,
-				"ISDN_CMD_ACCEPTD: invalid channel (%d)\n", ch);
-			return -EINVAL;
-		}
-		bcs = cs->bcs + ch;
-		switch (bcs->proto2) {
-		case L2_HDLC:
-			bcs->rx_bufsize = SBUFSIZE;
-			break;
-		default:			/* assume transparent */
-			bcs->rx_bufsize = TRANSBUFSIZE;
-		}
-		dev_kfree_skb(bcs->rx_skb);
-		gigaset_new_rx_skb(bcs);
-		if (!gigaset_add_event(cs, &bcs->at_state,
-				       EV_ACCEPT, NULL, 0, NULL))
-			return -ENOMEM;
-		gigaset_schedule_event(cs);
-
-		break;
-	case ISDN_CMD_HANGUP:
-		gig_dbg(DEBUG_CMD, "ISDN_CMD_HANGUP");
-		if (ch >= cs->channels) {
-			dev_err(cs->dev,
-				"ISDN_CMD_HANGUP: invalid channel (%d)\n", ch);
-			return -EINVAL;
-		}
-		bcs = cs->bcs + ch;
-		if (!gigaset_add_event(cs, &bcs->at_state,
-				       EV_HUP, NULL, 0, NULL))
-			return -ENOMEM;
-		gigaset_schedule_event(cs);
-
-		break;
-	case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */
-		dev_info(cs->dev, "ignoring ISDN_CMD_CLREAZ\n");
-		break;
-	case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */
-		dev_info(cs->dev, "ignoring ISDN_CMD_SETEAZ (%s)\n",
-			 cntrl->parm.num);
-		break;
-	case ISDN_CMD_SETL2: /* Set L2 to given protocol */
-		if (ch >= cs->channels) {
-			dev_err(cs->dev,
-				"ISDN_CMD_SETL2: invalid channel (%d)\n", ch);
-			return -EINVAL;
-		}
-		bcs = cs->bcs + ch;
-		if (bcs->chstate & CHS_D_UP) {
-			dev_err(cs->dev,
-				"ISDN_CMD_SETL2: channel active (%d)\n", ch);
-			return -EINVAL;
-		}
-		switch (cntrl->arg >> 8) {
-		case ISDN_PROTO_L2_HDLC:
-			gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_HDLC");
-			bcs->proto2 = L2_HDLC;
-			break;
-		case ISDN_PROTO_L2_TRANS:
-			gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_VOICE");
-			bcs->proto2 = L2_VOICE;
-			break;
-		default:
-			dev_err(cs->dev,
-				"ISDN_CMD_SETL2: unsupported protocol (%lu)\n",
-				cntrl->arg >> 8);
-			return -EINVAL;
-		}
-		break;
-	case ISDN_CMD_SETL3: /* Set L3 to given protocol */
-		gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL3");
-		if (ch >= cs->channels) {
-			dev_err(cs->dev,
-				"ISDN_CMD_SETL3: invalid channel (%d)\n", ch);
-			return -EINVAL;
-		}
-
-		if (cntrl->arg >> 8 != ISDN_PROTO_L3_TRANS) {
-			dev_err(cs->dev,
-				"ISDN_CMD_SETL3: unsupported protocol (%lu)\n",
-				cntrl->arg >> 8);
-			return -EINVAL;
-		}
-
-		break;
-
-	default:
-		gig_dbg(DEBUG_CMD, "unknown command %d from LL",
-			cntrl->command);
-		return -EINVAL;
-	}
-
-	return retval;
-
-oom:
-	dev_err(bcs->cs->dev, "out of memory\n");
-	for (i = 0; i < AT_NUM; ++i)
-		kfree(commands[i]);
-	kfree(commands);
-	gigaset_free_channel(bcs);
-	return -ENOMEM;
-}
-
-static void gigaset_i4l_cmd(struct cardstate *cs, int cmd)
-{
-	isdn_if *iif = cs->iif;
-	isdn_ctrl command;
-
-	command.driver = cs->myid;
-	command.command = cmd;
-	command.arg = 0;
-	iif->statcallb(&command);
-}
-
-static void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd)
-{
-	isdn_if *iif = bcs->cs->iif;
-	isdn_ctrl command;
-
-	command.driver = bcs->cs->myid;
-	command.command = cmd;
-	command.arg = bcs->channel;
-	iif->statcallb(&command);
-}
-
-/**
- * gigaset_isdn_icall() - signal incoming call
- * @at_state:	connection state structure.
- *
- * Called by main module to notify the LL that an incoming call has been
- * received. @at_state contains the parameters of the call.
- *
- * Return value: call disposition (ICALL_*)
- */
-int gigaset_isdn_icall(struct at_state_t *at_state)
-{
-	struct cardstate *cs = at_state->cs;
-	struct bc_state *bcs = at_state->bcs;
-	isdn_if *iif = cs->iif;
-	isdn_ctrl response;
-	int retval;
-
-	/* fill ICALL structure */
-	response.parm.setup.si1 = 0;	/* default: unknown */
-	response.parm.setup.si2 = 0;
-	response.parm.setup.screen = 0;
-	response.parm.setup.plan = 0;
-	if (!at_state->str_var[STR_ZBC]) {
-		/* no BC (internal call): assume speech, A-law */
-		response.parm.setup.si1 = 1;
-	} else if (!strcmp(at_state->str_var[STR_ZBC], "8890")) {
-		/* unrestricted digital information */
-		response.parm.setup.si1 = 7;
-	} else if (!strcmp(at_state->str_var[STR_ZBC], "8090A3")) {
-		/* speech, A-law */
-		response.parm.setup.si1 = 1;
-	} else if (!strcmp(at_state->str_var[STR_ZBC], "9090A3")) {
-		/* 3,1 kHz audio, A-law */
-		response.parm.setup.si1 = 1;
-		response.parm.setup.si2 = 2;
-	} else {
-		dev_warn(cs->dev, "RING ignored - unsupported BC %s\n",
-			 at_state->str_var[STR_ZBC]);
-		return ICALL_IGNORE;
-	}
-	if (at_state->str_var[STR_NMBR]) {
-		strlcpy(response.parm.setup.phone, at_state->str_var[STR_NMBR],
-			sizeof response.parm.setup.phone);
-	} else
-		response.parm.setup.phone[0] = 0;
-	if (at_state->str_var[STR_ZCPN]) {
-		strlcpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN],
-			sizeof response.parm.setup.eazmsn);
-	} else
-		response.parm.setup.eazmsn[0] = 0;
-
-	if (!bcs) {
-		dev_notice(cs->dev, "no channel for incoming call\n");
-		response.command = ISDN_STAT_ICALLW;
-		response.arg = 0;
-	} else {
-		gig_dbg(DEBUG_CMD, "Sending ICALL");
-		response.command = ISDN_STAT_ICALL;
-		response.arg = bcs->channel;
-	}
-	response.driver = cs->myid;
-	retval = iif->statcallb(&response);
-	gig_dbg(DEBUG_CMD, "Response: %d", retval);
-	switch (retval) {
-	case 0:	/* no takers */
-		return ICALL_IGNORE;
-	case 1:	/* alerting */
-		bcs->chstate |= CHS_NOTIFY_LL;
-		return ICALL_ACCEPT;
-	case 2:	/* reject */
-		return ICALL_REJECT;
-	case 3:	/* incomplete */
-		dev_warn(cs->dev,
-			 "LL requested unsupported feature: Incomplete Number\n");
-		return ICALL_IGNORE;
-	case 4:	/* proceeding */
-		/* Gigaset will send ALERTING anyway.
-		 * There doesn't seem to be a way to avoid this.
-		 */
-		return ICALL_ACCEPT;
-	case 5:	/* deflect */
-		dev_warn(cs->dev,
-			 "LL requested unsupported feature: Call Deflection\n");
-		return ICALL_IGNORE;
-	default:
-		dev_err(cs->dev, "LL error %d on ICALL\n", retval);
-		return ICALL_IGNORE;
-	}
-}
-
-/**
- * gigaset_isdn_connD() - signal D channel connect
- * @bcs:	B channel descriptor structure.
- *
- * Called by main module to notify the LL that the D channel connection has
- * been established.
- */
-void gigaset_isdn_connD(struct bc_state *bcs)
-{
-	gig_dbg(DEBUG_CMD, "sending DCONN");
-	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
-}
-
-/**
- * gigaset_isdn_hupD() - signal D channel hangup
- * @bcs:	B channel descriptor structure.
- *
- * Called by main module to notify the LL that the D channel connection has
- * been shut down.
- */
-void gigaset_isdn_hupD(struct bc_state *bcs)
-{
-	gig_dbg(DEBUG_CMD, "sending DHUP");
-	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
-}
-
-/**
- * gigaset_isdn_connB() - signal B channel connect
- * @bcs:	B channel descriptor structure.
- *
- * Called by main module to notify the LL that the B channel connection has
- * been established.
- */
-void gigaset_isdn_connB(struct bc_state *bcs)
-{
-	gig_dbg(DEBUG_CMD, "sending BCONN");
-	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN);
-}
-
-/**
- * gigaset_isdn_hupB() - signal B channel hangup
- * @bcs:	B channel descriptor structure.
- *
- * Called by main module to notify the LL that the B channel connection has
- * been shut down.
- */
-void gigaset_isdn_hupB(struct bc_state *bcs)
-{
-	gig_dbg(DEBUG_CMD, "sending BHUP");
-	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP);
-}
-
-/**
- * gigaset_isdn_start() - signal device availability
- * @cs:		device descriptor structure.
- *
- * Called by main module to notify the LL that the device is available for
- * use.
- */
-void gigaset_isdn_start(struct cardstate *cs)
-{
-	gig_dbg(DEBUG_CMD, "sending RUN");
-	gigaset_i4l_cmd(cs, ISDN_STAT_RUN);
-}
-
-/**
- * gigaset_isdn_stop() - signal device unavailability
- * @cs:		device descriptor structure.
- *
- * Called by main module to notify the LL that the device is no longer
- * available for use.
- */
-void gigaset_isdn_stop(struct cardstate *cs)
-{
-	gig_dbg(DEBUG_CMD, "sending STOP");
-	gigaset_i4l_cmd(cs, ISDN_STAT_STOP);
-}
-
-/**
- * gigaset_isdn_regdev() - register to LL
- * @cs:		device descriptor structure.
- * @isdnid:	device name.
- *
- * Return value: 0 on success, error code < 0 on failure
- */
-int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
-{
-	isdn_if *iif;
-
-	iif = kmalloc(sizeof *iif, GFP_KERNEL);
-	if (!iif) {
-		pr_err("out of memory\n");
-		return -ENOMEM;
-	}
-
-	if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index)
-	    >= sizeof iif->id) {
-		pr_err("ID too long: %s\n", isdnid);
-		kfree(iif);
-		return -EINVAL;
-	}
-
-	iif->owner = THIS_MODULE;
-	iif->channels = cs->channels;
-	iif->maxbufsize = MAX_BUF_SIZE;
-	iif->features = ISDN_FEATURE_L2_TRANS |
-		ISDN_FEATURE_L2_HDLC |
-		ISDN_FEATURE_L2_X75I |
-		ISDN_FEATURE_L3_TRANS |
-		ISDN_FEATURE_P_EURO;
-	iif->hl_hdrlen = HW_HDR_LEN;		/* Area for storing ack */
-	iif->command = command_from_LL;
-	iif->writebuf_skb = writebuf_from_LL;
-	iif->writecmd = NULL;			/* Don't support isdnctrl */
-	iif->readstat = NULL;			/* Don't support isdnctrl */
-	iif->rcvcallb_skb = NULL;		/* Will be set by LL */
-	iif->statcallb = NULL;			/* Will be set by LL */
-
-	if (!register_isdn(iif)) {
-		pr_err("register_isdn failed\n");
-		kfree(iif);
-		return -EINVAL;
-	}
-
-	cs->iif = iif;
-	cs->myid = iif->channels;		/* Set my device id */
-	cs->hw_hdr_len = HW_HDR_LEN;
-	return 0;
-}
-
-/**
- * gigaset_isdn_unregdev() - unregister device from LL
- * @cs:		device descriptor structure.
- */
-void gigaset_isdn_unregdev(struct cardstate *cs)
-{
-	gig_dbg(DEBUG_CMD, "sending UNLOAD");
-	gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD);
-	kfree(cs->iif);
-	cs->iif = NULL;
-}
-
-/**
- * gigaset_isdn_regdrv() - register driver to LL
- */
-void gigaset_isdn_regdrv(void)
-{
-	pr_info("ISDN4Linux interface\n");
-	/* nothing to do */
-}
-
-/**
- * gigaset_isdn_unregdrv() - unregister driver from LL
- */
-void gigaset_isdn_unregdrv(void)
-{
-	/* nothing to do */
-}