1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
|
/*
* libqos AHCI functions
*
* Copyright (c) 2014 John Snow <jsnow@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "libqtest.h"
#include "libqos/ahci.h"
#include "libqos/pci-pc.h"
#include "qemu-common.h"
#include "qemu/host-utils.h"
#include "hw/pci/pci_ids.h"
#include "hw/pci/pci_regs.h"
typedef struct AHCICommandProp {
uint8_t cmd; /* Command Code */
bool data; /* Data transfer command? */
bool pio;
bool dma;
bool lba28;
bool lba48;
bool read;
bool write;
bool atapi;
bool ncq;
uint64_t size; /* Static transfer size, for commands like IDENTIFY. */
uint32_t interrupts; /* Expected interrupts for this command. */
} AHCICommandProp;
AHCICommandProp ahci_command_properties[] = {
{ .cmd = CMD_READ_PIO, .data = true, .pio = true,
.lba28 = true, .read = true },
{ .cmd = CMD_WRITE_PIO, .data = true, .pio = true,
.lba28 = true, .write = true },
{ .cmd = CMD_READ_PIO_EXT, .data = true, .pio = true,
.lba48 = true, .read = true },
{ .cmd = CMD_WRITE_PIO_EXT, .data = true, .pio = true,
.lba48 = true, .write = true },
{ .cmd = CMD_READ_DMA, .data = true, .dma = true,
.lba28 = true, .read = true },
{ .cmd = CMD_WRITE_DMA, .data = true, .dma = true,
.lba28 = true, .write = true },
{ .cmd = CMD_READ_DMA_EXT, .data = true, .dma = true,
.lba48 = true, .read = true },
{ .cmd = CMD_WRITE_DMA_EXT, .data = true, .dma = true,
.lba48 = true, .write = true },
{ .cmd = CMD_IDENTIFY, .data = true, .pio = true,
.size = 512, .read = true },
{ .cmd = READ_FPDMA_QUEUED, .data = true, .dma = true,
.lba48 = true, .read = true, .ncq = true },
{ .cmd = WRITE_FPDMA_QUEUED, .data = true, .dma = true,
.lba48 = true, .write = true, .ncq = true },
{ .cmd = CMD_READ_MAX, .lba28 = true },
{ .cmd = CMD_READ_MAX_EXT, .lba48 = true },
{ .cmd = CMD_FLUSH_CACHE, .data = false },
{ .cmd = CMD_PACKET, .data = true, .size = 16,
.atapi = true, .pio = true },
{ .cmd = CMD_PACKET_ID, .data = true, .pio = true,
.size = 512, .read = true }
};
struct AHCICommand {
/* Test Management Data */
uint8_t name;
uint8_t port;
uint8_t slot;
uint8_t errors;
uint32_t interrupts;
uint64_t xbytes;
uint32_t prd_size;
uint64_t buffer;
AHCICommandProp *props;
/* Data to be transferred to the guest */
AHCICommandHeader header;
RegH2DFIS fis;
unsigned char *atapi_cmd;
};
/**
* Allocate space in the guest using information in the AHCIQState object.
*/
uint64_t ahci_alloc(AHCIQState *ahci, size_t bytes)
{
g_assert(ahci);
g_assert(ahci->parent);
return qmalloc(ahci->parent, bytes);
}
void ahci_free(AHCIQState *ahci, uint64_t addr)
{
g_assert(ahci);
g_assert(ahci->parent);
qfree(ahci->parent, addr);
}
bool is_atapi(AHCIQState *ahci, uint8_t port)
{
return ahci_px_rreg(ahci, port, AHCI_PX_SIG) == AHCI_SIGNATURE_CDROM;
}
/**
* Locate, verify, and return a handle to the AHCI device.
*/
QPCIDevice *get_ahci_device(uint32_t *fingerprint)
{
QPCIDevice *ahci;
uint32_t ahci_fingerprint;
QPCIBus *pcibus;
pcibus = qpci_init_pc(NULL);
/* Find the AHCI PCI device and verify it's the right one. */
ahci = qpci_device_find(pcibus, QPCI_DEVFN(0x1F, 0x02));
g_assert(ahci != NULL);
ahci_fingerprint = qpci_config_readl(ahci, PCI_VENDOR_ID);
switch (ahci_fingerprint) {
case AHCI_INTEL_ICH9:
break;
default:
/* Unknown device. */
g_assert_not_reached();
}
if (fingerprint) {
*fingerprint = ahci_fingerprint;
}
return ahci;
}
void free_ahci_device(QPCIDevice *dev)
{
QPCIBus *pcibus = dev ? dev->bus : NULL;
/* libqos doesn't have a function for this, so free it manually */
g_free(dev);
qpci_free_pc(pcibus);
}
/* Free all memory in-use by the AHCI device. */
void ahci_clean_mem(AHCIQState *ahci)
{
uint8_t port, slot;
for (port = 0; port < 32; ++port) {
if (ahci->port[port].fb) {
ahci_free(ahci, ahci->port[port].fb);
ahci->port[port].fb = 0;
}
if (ahci->port[port].clb) {
for (slot = 0; slot < 32; slot++) {
ahci_destroy_command(ahci, port, slot);
}
ahci_free(ahci, ahci->port[port].clb);
ahci->port[port].clb = 0;
}
}
}
/*** Logical Device Initialization ***/
/**
* Start the PCI device and sanity-check default operation.
*/
void ahci_pci_enable(AHCIQState *ahci)
{
uint8_t reg;
start_ahci_device(ahci);
switch (ahci->fingerprint) {
case AHCI_INTEL_ICH9:
/* ICH9 has a register at PCI 0x92 that
* acts as a master port enabler mask. */
reg = qpci_config_readb(ahci->dev, 0x92);
reg |= 0x3F;
qpci_config_writeb(ahci->dev, 0x92, reg);
/* 0...0111111b -- bit significant, ports 0-5 enabled. */
ASSERT_BIT_SET(qpci_config_readb(ahci->dev, 0x92), 0x3F);
break;
}
}
/**
* Map BAR5/ABAR, and engage the PCI device.
*/
void start_ahci_device(AHCIQState *ahci)
{
/* Map AHCI's ABAR (BAR5) */
ahci->hba_bar = qpci_iomap(ahci->dev, 5, &ahci->barsize);
/* turns on pci.cmd.iose, pci.cmd.mse and pci.cmd.bme */
qpci_device_enable(ahci->dev);
}
/**
* Test and initialize the AHCI's HBA memory areas.
* Initialize and start any ports with devices attached.
* Bring the HBA into the idle state.
*/
void ahci_hba_enable(AHCIQState *ahci)
{
/* Bits of interest in this section:
* GHC.AE Global Host Control / AHCI Enable
* PxCMD.ST Port Command: Start
* PxCMD.SUD "Spin Up Device"
* PxCMD.POD "Power On Device"
* PxCMD.FRE "FIS Receive Enable"
* PxCMD.FR "FIS Receive Running"
* PxCMD.CR "Command List Running"
*/
uint32_t reg, ports_impl;
uint16_t i;
uint8_t num_cmd_slots;
g_assert(ahci != NULL);
/* Set GHC.AE to 1 */
ahci_set(ahci, AHCI_GHC, AHCI_GHC_AE);
reg = ahci_rreg(ahci, AHCI_GHC);
ASSERT_BIT_SET(reg, AHCI_GHC_AE);
/* Cache CAP and CAP2. */
ahci->cap = ahci_rreg(ahci, AHCI_CAP);
ahci->cap2 = ahci_rreg(ahci, AHCI_CAP2);
/* Read CAP.NCS, how many command slots do we have? */
num_cmd_slots = ((ahci->cap & AHCI_CAP_NCS) >> ctzl(AHCI_CAP_NCS)) + 1;
g_test_message("Number of Command Slots: %u", num_cmd_slots);
/* Determine which ports are implemented. */
ports_impl = ahci_rreg(ahci, AHCI_PI);
for (i = 0; ports_impl; ports_impl >>= 1, ++i) {
if (!(ports_impl & 0x01)) {
continue;
}
g_test_message("Initializing port %u", i);
reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
if (BITCLR(reg, AHCI_PX_CMD_ST | AHCI_PX_CMD_CR |
AHCI_PX_CMD_FRE | AHCI_PX_CMD_FR)) {
g_test_message("port is idle");
} else {
g_test_message("port needs to be idled");
ahci_px_clr(ahci, i, AHCI_PX_CMD,
(AHCI_PX_CMD_ST | AHCI_PX_CMD_FRE));
/* The port has 500ms to disengage. */
usleep(500000);
reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FR);
g_test_message("port is now idle");
/* The spec does allow for possibly needing a PORT RESET
* or HBA reset if we fail to idle the port. */
}
/* Allocate Memory for the Command List Buffer & FIS Buffer */
/* PxCLB space ... 0x20 per command, as in 4.2.2 p 36 */
ahci->port[i].clb = ahci_alloc(ahci, num_cmd_slots * 0x20);
qmemset(ahci->port[i].clb, 0x00, num_cmd_slots * 0x20);
g_test_message("CLB: 0x%08" PRIx64, ahci->port[i].clb);
ahci_px_wreg(ahci, i, AHCI_PX_CLB, ahci->port[i].clb);
g_assert_cmphex(ahci->port[i].clb, ==,
ahci_px_rreg(ahci, i, AHCI_PX_CLB));
/* PxFB space ... 0x100, as in 4.2.1 p 35 */
ahci->port[i].fb = ahci_alloc(ahci, 0x100);
qmemset(ahci->port[i].fb, 0x00, 0x100);
g_test_message("FB: 0x%08" PRIx64, ahci->port[i].fb);
ahci_px_wreg(ahci, i, AHCI_PX_FB, ahci->port[i].fb);
g_assert_cmphex(ahci->port[i].fb, ==,
ahci_px_rreg(ahci, i, AHCI_PX_FB));
/* Clear PxSERR, PxIS, then IS.IPS[x] by writing '1's. */
ahci_px_wreg(ahci, i, AHCI_PX_SERR, 0xFFFFFFFF);
ahci_px_wreg(ahci, i, AHCI_PX_IS, 0xFFFFFFFF);
ahci_wreg(ahci, AHCI_IS, (1 << i));
/* Verify Interrupts Cleared */
reg = ahci_px_rreg(ahci, i, AHCI_PX_SERR);
g_assert_cmphex(reg, ==, 0);
reg = ahci_px_rreg(ahci, i, AHCI_PX_IS);
g_assert_cmphex(reg, ==, 0);
reg = ahci_rreg(ahci, AHCI_IS);
ASSERT_BIT_CLEAR(reg, (1 << i));
/* Enable All Interrupts: */
ahci_px_wreg(ahci, i, AHCI_PX_IE, 0xFFFFFFFF);
reg = ahci_px_rreg(ahci, i, AHCI_PX_IE);
g_assert_cmphex(reg, ==, ~((uint32_t)AHCI_PX_IE_RESERVED));
/* Enable the FIS Receive Engine. */
ahci_px_set(ahci, i, AHCI_PX_CMD, AHCI_PX_CMD_FRE);
reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
ASSERT_BIT_SET(reg, AHCI_PX_CMD_FR);
/* AHCI 1.3 spec: if !STS.BSY, !STS.DRQ and PxSSTS.DET indicates
* physical presence, a device is present and may be started. However,
* PxSERR.DIAG.X /may/ need to be cleared a priori. */
reg = ahci_px_rreg(ahci, i, AHCI_PX_SERR);
if (BITSET(reg, AHCI_PX_SERR_DIAG_X)) {
ahci_px_set(ahci, i, AHCI_PX_SERR, AHCI_PX_SERR_DIAG_X);
}
reg = ahci_px_rreg(ahci, i, AHCI_PX_TFD);
if (BITCLR(reg, AHCI_PX_TFD_STS_BSY | AHCI_PX_TFD_STS_DRQ)) {
reg = ahci_px_rreg(ahci, i, AHCI_PX_SSTS);
if ((reg & AHCI_PX_SSTS_DET) == SSTS_DET_ESTABLISHED) {
/* Device Found: set PxCMD.ST := 1 */
ahci_px_set(ahci, i, AHCI_PX_CMD, AHCI_PX_CMD_ST);
ASSERT_BIT_SET(ahci_px_rreg(ahci, i, AHCI_PX_CMD),
AHCI_PX_CMD_CR);
g_test_message("Started Device %u", i);
} else if ((reg & AHCI_PX_SSTS_DET)) {
/* Device present, but in some unknown state. */
g_assert_not_reached();
}
}
}
/* Enable GHC.IE */
ahci_set(ahci, AHCI_GHC, AHCI_GHC_IE);
reg = ahci_rreg(ahci, AHCI_GHC);
ASSERT_BIT_SET(reg, AHCI_GHC_IE);
ahci->enabled = true;
/* TODO: The device should now be idling and waiting for commands.
* In the future, a small test-case to inspect the Register D2H FIS
* and clear the initial interrupts might be good. */
}
/**
* Pick the first implemented and running port
*/
unsigned ahci_port_select(AHCIQState *ahci)
{
uint32_t ports, reg;
unsigned i;
ports = ahci_rreg(ahci, AHCI_PI);
for (i = 0; i < 32; ports >>= 1, ++i) {
if (ports == 0) {
i = 32;
}
if (!(ports & 0x01)) {
continue;
}
reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
if (BITSET(reg, AHCI_PX_CMD_ST)) {
break;
}
}
g_assert(i < 32);
return i;
}
/**
* Clear a port's interrupts and status information prior to a test.
*/
void ahci_port_clear(AHCIQState *ahci, uint8_t port)
{
uint32_t reg;
/* Clear out this port's interrupts (ignore the init register d2h fis) */
reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
ahci_px_wreg(ahci, port, AHCI_PX_IS, reg);
g_assert_cmphex(ahci_px_rreg(ahci, port, AHCI_PX_IS), ==, 0);
/* Wipe the FIS-Receive Buffer */
qmemset(ahci->port[port].fb, 0x00, 0x100);
}
/**
* Check a port for errors.
*/
void ahci_port_check_error(AHCIQState *ahci, uint8_t port,
uint32_t imask, uint8_t emask)
{
uint32_t reg;
/* The upper 9 bits of the IS register all indicate errors. */
reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
reg &= ~imask;
reg >>= 23;
g_assert_cmphex(reg, ==, 0);
/* The Sata Error Register should be empty. */
reg = ahci_px_rreg(ahci, port, AHCI_PX_SERR);
g_assert_cmphex(reg, ==, 0);
/* The TFD also has two error sections. */
reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
if (!emask) {
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_ERR);
} else {
ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_ERR);
}
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR & (~emask << 8));
ASSERT_BIT_SET(reg, AHCI_PX_TFD_ERR & (emask << 8));
}
void ahci_port_check_interrupts(AHCIQState *ahci, uint8_t port,
uint32_t intr_mask)
{
uint32_t reg;
/* Check for expected interrupts */
reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
ASSERT_BIT_SET(reg, intr_mask);
/* Clear expected interrupts and assert all interrupts now cleared. */
ahci_px_wreg(ahci, port, AHCI_PX_IS, intr_mask);
g_assert_cmphex(ahci_px_rreg(ahci, port, AHCI_PX_IS), ==, 0);
}
void ahci_port_check_nonbusy(AHCIQState *ahci, uint8_t port, uint8_t slot)
{
uint32_t reg;
/* Assert that the command slot is no longer busy (NCQ) */
reg = ahci_px_rreg(ahci, port, AHCI_PX_SACT);
ASSERT_BIT_CLEAR(reg, (1 << slot));
/* Non-NCQ */
reg = ahci_px_rreg(ahci, port, AHCI_PX_CI);
ASSERT_BIT_CLEAR(reg, (1 << slot));
/* And assert that we are generally not busy. */
reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_BSY);
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_DRQ);
}
void ahci_port_check_d2h_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot)
{
RegD2HFIS *d2h = g_malloc0(0x20);
uint32_t reg;
memread(ahci->port[port].fb + 0x40, d2h, 0x20);
g_assert_cmphex(d2h->fis_type, ==, 0x34);
reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
g_assert_cmphex((reg & AHCI_PX_TFD_ERR) >> 8, ==, d2h->error);
g_assert_cmphex((reg & AHCI_PX_TFD_STS), ==, d2h->status);
g_free(d2h);
}
void ahci_port_check_pio_sanity(AHCIQState *ahci, uint8_t port,
uint8_t slot, size_t buffsize)
{
PIOSetupFIS *pio = g_malloc0(0x20);
/* We cannot check the Status or E_Status registers, because
* the status may have again changed between the PIO Setup FIS
* and the conclusion of the command with the D2H Register FIS. */
memread(ahci->port[port].fb + 0x20, pio, 0x20);
g_assert_cmphex(pio->fis_type, ==, 0x5f);
/* BUG: PIO Setup FIS as utilized by QEMU tries to fit the entire
* transfer size in a uint16_t field. The maximum transfer size can
* eclipse this; the field is meant to convey the size of data per
* each Data FIS, not the entire operation as a whole. For now,
* we will sanity check the broken case where applicable. */
if (buffsize <= UINT16_MAX) {
g_assert_cmphex(le16_to_cpu(pio->tx_count), ==, buffsize);
}
g_free(pio);
}
void ahci_port_check_cmd_sanity(AHCIQState *ahci, AHCICommand *cmd)
{
AHCICommandHeader cmdh;
ahci_get_command_header(ahci, cmd->port, cmd->slot, &cmdh);
/* Physical Region Descriptor Byte Count is not required to work for NCQ. */
if (!cmd->props->ncq) {
g_assert_cmphex(cmd->xbytes, ==, cmdh.prdbc);
}
}
/* Get the command in #slot of port #port. */
void ahci_get_command_header(AHCIQState *ahci, uint8_t port,
uint8_t slot, AHCICommandHeader *cmd)
{
uint64_t ba = ahci->port[port].clb;
ba += slot * sizeof(AHCICommandHeader);
memread(ba, cmd, sizeof(AHCICommandHeader));
cmd->flags = le16_to_cpu(cmd->flags);
cmd->prdtl = le16_to_cpu(cmd->prdtl);
cmd->prdbc = le32_to_cpu(cmd->prdbc);
cmd->ctba = le64_to_cpu(cmd->ctba);
}
/* Set the command in #slot of port #port. */
void ahci_set_command_header(AHCIQState *ahci, uint8_t port,
uint8_t slot, AHCICommandHeader *cmd)
{
AHCICommandHeader tmp = { .flags = 0 };
uint64_t ba = ahci->port[port].clb;
ba += slot * sizeof(AHCICommandHeader);
tmp.flags = cpu_to_le16(cmd->flags);
tmp.prdtl = cpu_to_le16(cmd->prdtl);
tmp.prdbc = cpu_to_le32(cmd->prdbc);
tmp.ctba = cpu_to_le64(cmd->ctba);
memwrite(ba, &tmp, sizeof(AHCICommandHeader));
}
void ahci_destroy_command(AHCIQState *ahci, uint8_t port, uint8_t slot)
{
AHCICommandHeader cmd;
/* Obtain the Nth Command Header */
ahci_get_command_header(ahci, port, slot, &cmd);
if (cmd.ctba == 0) {
/* No address in it, so just return -- it's empty. */
goto tidy;
}
/* Free the Table */
ahci_free(ahci, cmd.ctba);
tidy:
/* NULL the header. */
memset(&cmd, 0x00, sizeof(cmd));
ahci_set_command_header(ahci, port, slot, &cmd);
ahci->port[port].ctba[slot] = 0;
ahci->port[port].prdtl[slot] = 0;
}
void ahci_write_fis(AHCIQState *ahci, AHCICommand *cmd)
{
RegH2DFIS tmp = cmd->fis;
uint64_t addr = cmd->header.ctba;
/* NCQ commands use exclusively 8 bit fields and needs no adjustment.
* Only the count field needs to be adjusted for non-NCQ commands.
* The auxiliary FIS fields are defined per-command and are not currently
* implemented in libqos/ahci.o, but may or may not need to be flipped. */
if (!cmd->props->ncq) {
tmp.count = cpu_to_le16(tmp.count);
}
memwrite(addr, &tmp, sizeof(tmp));
}
unsigned ahci_pick_cmd(AHCIQState *ahci, uint8_t port)
{
unsigned i;
unsigned j;
uint32_t reg;
reg = ahci_px_rreg(ahci, port, AHCI_PX_CI);
/* Pick the least recently used command slot that's available */
for (i = 0; i < 32; ++i) {
j = ((ahci->port[port].next + i) % 32);
if (reg & (1 << j)) {
continue;
}
ahci_destroy_command(ahci, port, j);
ahci->port[port].next = (j + 1) % 32;
return j;
}
g_test_message("All command slots were busy.");
g_assert_not_reached();
}
inline unsigned size_to_prdtl(unsigned bytes, unsigned bytes_per_prd)
{
/* Each PRD can describe up to 4MiB */
g_assert_cmphex(bytes_per_prd, <=, 4096 * 1024);
g_assert_cmphex(bytes_per_prd & 0x01, ==, 0x00);
return (bytes + bytes_per_prd - 1) / bytes_per_prd;
}
const AHCIOpts default_opts = { .size = 0 };
/**
* ahci_exec: execute a given command on a specific
* AHCI port.
*
* @ahci: The device to send the command to
* @port: The port number of the SATA device we wish
* to have execute this command
* @op: The S/ATA command to execute, or if opts.atapi
* is true, the SCSI command code.
* @opts: Optional arguments to modify execution behavior.
*/
void ahci_exec(AHCIQState *ahci, uint8_t port,
uint8_t op, const AHCIOpts *opts_in)
{
AHCICommand *cmd;
int rc;
AHCIOpts *opts;
opts = g_memdup((opts_in == NULL ? &default_opts : opts_in),
sizeof(AHCIOpts));
/* No guest buffer provided, create one. */
if (opts->size && !opts->buffer) {
opts->buffer = ahci_alloc(ahci, opts->size);
g_assert(opts->buffer);
qmemset(opts->buffer, 0x00, opts->size);
}
/* Command creation */
if (opts->atapi) {
uint16_t bcl = opts->set_bcl ? opts->bcl : ATAPI_SECTOR_SIZE;
cmd = ahci_atapi_command_create(op, bcl);
if (opts->atapi_dma) {
ahci_command_enable_atapi_dma(cmd);
}
} else {
cmd = ahci_command_create(op);
}
ahci_command_adjust(cmd, opts->lba, opts->buffer,
opts->size, opts->prd_size);
if (opts->pre_cb) {
rc = opts->pre_cb(ahci, cmd, opts);
g_assert_cmpint(rc, ==, 0);
}
/* Write command to memory and issue it */
ahci_command_commit(ahci, cmd, port);
ahci_command_issue_async(ahci, cmd);
if (opts->error) {
qmp_eventwait("STOP");
}
if (opts->mid_cb) {
rc = opts->mid_cb(ahci, cmd, opts);
g_assert_cmpint(rc, ==, 0);
}
if (opts->error) {
qmp_async("{'execute':'cont' }");
qmp_eventwait("RESUME");
}
/* Wait for command to complete and verify sanity */
ahci_command_wait(ahci, cmd);
ahci_command_verify(ahci, cmd);
if (opts->post_cb) {
rc = opts->post_cb(ahci, cmd, opts);
g_assert_cmpint(rc, ==, 0);
}
ahci_command_free(cmd);
if (opts->buffer != opts_in->buffer) {
ahci_free(ahci, opts->buffer);
}
g_free(opts);
}
/* Issue a command, expecting it to fail and STOP the VM */
AHCICommand *ahci_guest_io_halt(AHCIQState *ahci, uint8_t port,
uint8_t ide_cmd, uint64_t buffer,
size_t bufsize, uint64_t sector)
{
AHCICommand *cmd;
cmd = ahci_command_create(ide_cmd);
ahci_command_adjust(cmd, sector, buffer, bufsize, 0);
ahci_command_commit(ahci, cmd, port);
ahci_command_issue_async(ahci, cmd);
qmp_eventwait("STOP");
return cmd;
}
/* Resume a previously failed command and verify/finalize */
void ahci_guest_io_resume(AHCIQState *ahci, AHCICommand *cmd)
{
/* Complete the command */
qmp_async("{'execute':'cont' }");
qmp_eventwait("RESUME");
ahci_command_wait(ahci, cmd);
ahci_command_verify(ahci, cmd);
ahci_command_free(cmd);
}
/* Given a guest buffer address, perform an IO operation */
void ahci_guest_io(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
uint64_t buffer, size_t bufsize, uint64_t sector)
{
AHCICommand *cmd;
cmd = ahci_command_create(ide_cmd);
ahci_command_set_buffer(cmd, buffer);
ahci_command_set_size(cmd, bufsize);
if (sector) {
ahci_command_set_offset(cmd, sector);
}
ahci_command_commit(ahci, cmd, port);
ahci_command_issue(ahci, cmd);
ahci_command_verify(ahci, cmd);
ahci_command_free(cmd);
}
static AHCICommandProp *ahci_command_find(uint8_t command_name)
{
int i;
for (i = 0; i < ARRAY_SIZE(ahci_command_properties); i++) {
if (ahci_command_properties[i].cmd == command_name) {
return &ahci_command_properties[i];
}
}
return NULL;
}
/* Given a HOST buffer, create a buffer address and perform an IO operation. */
void ahci_io(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
void *buffer, size_t bufsize, uint64_t sector)
{
uint64_t ptr;
AHCICommandProp *props;
props = ahci_command_find(ide_cmd);
g_assert(props);
ptr = ahci_alloc(ahci, bufsize);
g_assert(!bufsize || ptr);
qmemset(ptr, 0x00, bufsize);
if (bufsize && props->write) {
bufwrite(ptr, buffer, bufsize);
}
ahci_guest_io(ahci, port, ide_cmd, ptr, bufsize, sector);
if (bufsize && props->read) {
bufread(ptr, buffer, bufsize);
}
ahci_free(ahci, ptr);
}
/**
* Initializes a basic command header in memory.
* We assume that this is for an ATA command using RegH2DFIS.
*/
static void command_header_init(AHCICommand *cmd)
{
AHCICommandHeader *hdr = &cmd->header;
AHCICommandProp *props = cmd->props;
hdr->flags = 5; /* RegH2DFIS is 5 DW long. Must be < 32 */
hdr->flags |= CMDH_CLR_BSY; /* Clear the BSY bit when done */
if (props->write) {
hdr->flags |= CMDH_WRITE;
}
if (props->atapi) {
hdr->flags |= CMDH_ATAPI;
}
/* Other flags: PREFETCH, RESET, and BIST */
hdr->prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
hdr->prdbc = 0;
hdr->ctba = 0;
}
static void command_table_init(AHCICommand *cmd)
{
RegH2DFIS *fis = &(cmd->fis);
uint16_t sect_count = (cmd->xbytes / AHCI_SECTOR_SIZE);
fis->fis_type = REG_H2D_FIS;
fis->flags = REG_H2D_FIS_CMD; /* "Command" bit */
fis->command = cmd->name;
if (cmd->props->ncq) {
NCQFIS *ncqfis = (NCQFIS *)fis;
/* NCQ is weird and re-uses FIS frames for unrelated data.
* See SATA 3.2, 13.6.4.1 READ FPDMA QUEUED for an example. */
ncqfis->sector_low = sect_count & 0xFF;
ncqfis->sector_hi = (sect_count >> 8) & 0xFF;
ncqfis->device = NCQ_DEVICE_MAGIC;
/* Force Unit Access is bit 7 in the device register */
ncqfis->tag = 0; /* bits 3-7 are the NCQ tag */
ncqfis->prio = 0; /* bits 6,7 are a prio tag */
/* RARC bit is bit 0 of TAG field */
} else {
fis->feature_low = 0x00;
fis->feature_high = 0x00;
if (cmd->props->lba28 || cmd->props->lba48) {
fis->device = ATA_DEVICE_LBA;
}
fis->count = (cmd->xbytes / AHCI_SECTOR_SIZE);
}
fis->icc = 0x00;
fis->control = 0x00;
memset(fis->aux, 0x00, ARRAY_SIZE(fis->aux));
}
void ahci_command_enable_atapi_dma(AHCICommand *cmd)
{
RegH2DFIS *fis = &(cmd->fis);
g_assert(cmd->props->atapi);
fis->feature_low |= 0x01;
cmd->interrupts &= ~AHCI_PX_IS_PSS;
cmd->props->dma = true;
cmd->props->pio = false;
/* BUG: We expect the DMA Setup interrupt for DMA commands */
/* cmd->interrupts |= AHCI_PX_IS_DSS; */
}
AHCICommand *ahci_command_create(uint8_t command_name)
{
AHCICommandProp *props = ahci_command_find(command_name);
AHCICommand *cmd;
g_assert(props);
cmd = g_malloc0(sizeof(AHCICommand));
g_assert(!(props->dma && props->pio));
g_assert(!(props->lba28 && props->lba48));
g_assert(!(props->read && props->write));
g_assert(!props->size || props->data);
g_assert(!props->ncq || props->lba48);
/* Defaults and book-keeping */
cmd->props = g_memdup(props, sizeof(AHCICommandProp));
cmd->name = command_name;
cmd->xbytes = props->size;
cmd->prd_size = 4096;
cmd->buffer = 0xabad1dea;
if (!cmd->props->ncq) {
cmd->interrupts = AHCI_PX_IS_DHRS;
}
/* BUG: We expect the DPS interrupt for data commands */
/* cmd->interrupts |= props->data ? AHCI_PX_IS_DPS : 0; */
/* BUG: We expect the DMA Setup interrupt for DMA commands */
/* cmd->interrupts |= props->dma ? AHCI_PX_IS_DSS : 0; */
cmd->interrupts |= props->pio ? AHCI_PX_IS_PSS : 0;
cmd->interrupts |= props->ncq ? AHCI_PX_IS_SDBS : 0;
command_header_init(cmd);
command_table_init(cmd);
return cmd;
}
AHCICommand *ahci_atapi_command_create(uint8_t scsi_cmd, uint16_t bcl)
{
AHCICommand *cmd = ahci_command_create(CMD_PACKET);
cmd->atapi_cmd = g_malloc0(16);
cmd->atapi_cmd[0] = scsi_cmd;
stw_le_p(&cmd->fis.lba_lo[1], bcl);
return cmd;
}
void ahci_command_free(AHCICommand *cmd)
{
g_free(cmd->atapi_cmd);
g_free(cmd->props);
g_free(cmd);
}
void ahci_command_set_flags(AHCICommand *cmd, uint16_t cmdh_flags)
{
cmd->header.flags |= cmdh_flags;
}
void ahci_command_clr_flags(AHCICommand *cmd, uint16_t cmdh_flags)
{
cmd->header.flags &= ~cmdh_flags;
}
static void ahci_atapi_command_set_offset(AHCICommand *cmd, uint64_t lba)
{
unsigned char *cbd = cmd->atapi_cmd;
g_assert(cbd);
switch (cbd[0]) {
case CMD_ATAPI_READ_10:
case CMD_ATAPI_READ_CD:
g_assert_cmpuint(lba, <=, UINT32_MAX);
stl_be_p(&cbd[2], lba);
break;
default:
/* SCSI doesn't have uniform packet formats,
* so you have to add support for it manually. Sorry! */
fprintf(stderr, "The Libqos AHCI driver does not support the "
"set_offset operation for ATAPI command 0x%02x, "
"please add support.\n",
cbd[0]);
g_assert_not_reached();
}
}
void ahci_command_set_offset(AHCICommand *cmd, uint64_t lba_sect)
{
RegH2DFIS *fis = &(cmd->fis);
if (cmd->props->atapi) {
ahci_atapi_command_set_offset(cmd, lba_sect);
return;
} else if (!cmd->props->data && !lba_sect) {
/* Not meaningful, ignore. */
return;
} else if (cmd->props->lba28) {
g_assert_cmphex(lba_sect, <=, 0xFFFFFFF);
} else if (cmd->props->lba48 || cmd->props->ncq) {
g_assert_cmphex(lba_sect, <=, 0xFFFFFFFFFFFF);
} else {
/* Can't set offset if we don't know the format. */
g_assert_not_reached();
}
/* LBA28 uses the low nibble of the device/control register for LBA24:27 */
fis->lba_lo[0] = (lba_sect & 0xFF);
fis->lba_lo[1] = (lba_sect >> 8) & 0xFF;
fis->lba_lo[2] = (lba_sect >> 16) & 0xFF;
if (cmd->props->lba28) {
fis->device = (fis->device & 0xF0) | ((lba_sect >> 24) & 0x0F);
}
fis->lba_hi[0] = (lba_sect >> 24) & 0xFF;
fis->lba_hi[1] = (lba_sect >> 32) & 0xFF;
fis->lba_hi[2] = (lba_sect >> 40) & 0xFF;
}
void ahci_command_set_buffer(AHCICommand *cmd, uint64_t buffer)
{
cmd->buffer = buffer;
}
static void ahci_atapi_set_size(AHCICommand *cmd, uint64_t xbytes)
{
unsigned char *cbd = cmd->atapi_cmd;
uint64_t nsectors = xbytes / 2048;
uint32_t tmp;
g_assert(cbd);
switch (cbd[0]) {
case CMD_ATAPI_READ_10:
g_assert_cmpuint(nsectors, <=, UINT16_MAX);
stw_be_p(&cbd[7], nsectors);
break;
case CMD_ATAPI_READ_CD:
/* 24bit BE store */
g_assert_cmpuint(nsectors, <, 1ULL << 24);
tmp = nsectors;
cbd[6] = (tmp & 0xFF0000) >> 16;
cbd[7] = (tmp & 0xFF00) >> 8;
cbd[8] = (tmp & 0xFF);
break;
default:
/* SCSI doesn't have uniform packet formats,
* so you have to add support for it manually. Sorry! */
fprintf(stderr, "The Libqos AHCI driver does not support the set_size "
"operation for ATAPI command 0x%02x, please add support.\n",
cbd[0]);
g_assert_not_reached();
}
}
void ahci_command_set_sizes(AHCICommand *cmd, uint64_t xbytes,
unsigned prd_size)
{
uint16_t sect_count;
/* Each PRD can describe up to 4MiB, and must not be odd. */
g_assert_cmphex(prd_size, <=, 4096 * 1024);
g_assert_cmphex(prd_size & 0x01, ==, 0x00);
if (prd_size) {
cmd->prd_size = prd_size;
}
cmd->xbytes = xbytes;
sect_count = (cmd->xbytes / AHCI_SECTOR_SIZE);
if (cmd->props->ncq) {
NCQFIS *nfis = (NCQFIS *)&(cmd->fis);
nfis->sector_low = sect_count & 0xFF;
nfis->sector_hi = (sect_count >> 8) & 0xFF;
} else if (cmd->props->atapi) {
ahci_atapi_set_size(cmd, xbytes);
} else {
cmd->fis.count = sect_count;
}
cmd->header.prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
}
void ahci_command_set_size(AHCICommand *cmd, uint64_t xbytes)
{
ahci_command_set_sizes(cmd, xbytes, cmd->prd_size);
}
void ahci_command_set_prd_size(AHCICommand *cmd, unsigned prd_size)
{
ahci_command_set_sizes(cmd, cmd->xbytes, prd_size);
}
void ahci_command_adjust(AHCICommand *cmd, uint64_t offset, uint64_t buffer,
uint64_t xbytes, unsigned prd_size)
{
ahci_command_set_sizes(cmd, xbytes, prd_size);
ahci_command_set_buffer(cmd, buffer);
ahci_command_set_offset(cmd, offset);
}
void ahci_command_commit(AHCIQState *ahci, AHCICommand *cmd, uint8_t port)
{
uint16_t i, prdtl;
uint64_t table_size, table_ptr, remaining;
PRD prd;
/* This command is now tied to this port/command slot */
cmd->port = port;
cmd->slot = ahci_pick_cmd(ahci, port);
if (cmd->props->ncq) {
NCQFIS *nfis = (NCQFIS *)&cmd->fis;
nfis->tag = (cmd->slot << 3) & 0xFC;
}
/* Create a buffer for the command table */
prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
table_size = CMD_TBL_SIZ(prdtl);
table_ptr = ahci_alloc(ahci, table_size);
g_assert(table_ptr);
/* AHCI 1.3: Must be aligned to 0x80 */
g_assert((table_ptr & 0x7F) == 0x00);
cmd->header.ctba = table_ptr;
/* Commit the command header (part of the Command List Buffer) */
ahci_set_command_header(ahci, port, cmd->slot, &(cmd->header));
/* Now, write the command table (FIS, ACMD, and PRDT) -- FIS first, */
ahci_write_fis(ahci, cmd);
/* Then ATAPI CMD, if needed */
if (cmd->props->atapi) {
memwrite(table_ptr + 0x40, cmd->atapi_cmd, 16);
}
/* Construct and write the PRDs to the command table */
g_assert_cmphex(prdtl, ==, cmd->header.prdtl);
remaining = cmd->xbytes;
for (i = 0; i < prdtl; ++i) {
prd.dba = cpu_to_le64(cmd->buffer + (cmd->prd_size * i));
prd.res = 0;
if (remaining > cmd->prd_size) {
/* Note that byte count is 0-based. */
prd.dbc = cpu_to_le32(cmd->prd_size - 1);
remaining -= cmd->prd_size;
} else {
/* Again, dbc is 0-based. */
prd.dbc = cpu_to_le32(remaining - 1);
remaining = 0;
}
prd.dbc |= cpu_to_le32(0x80000000); /* Request DPS Interrupt */
/* Commit the PRD entry to the Command Table */
memwrite(table_ptr + 0x80 + (i * sizeof(PRD)),
&prd, sizeof(PRD));
}
/* Bookmark the PRDTL and CTBA values */
ahci->port[port].ctba[cmd->slot] = table_ptr;
ahci->port[port].prdtl[cmd->slot] = prdtl;
}
void ahci_command_issue_async(AHCIQState *ahci, AHCICommand *cmd)
{
if (cmd->props->ncq) {
ahci_px_wreg(ahci, cmd->port, AHCI_PX_SACT, (1 << cmd->slot));
}
ahci_px_wreg(ahci, cmd->port, AHCI_PX_CI, (1 << cmd->slot));
}
void ahci_command_wait(AHCIQState *ahci, AHCICommand *cmd)
{
/* We can't rely on STS_BSY until the command has started processing.
* Therefore, we also use the Command Issue bit as indication of
* a command in-flight. */
#define RSET(REG, MASK) (BITSET(ahci_px_rreg(ahci, cmd->port, (REG)), (MASK)))
while (RSET(AHCI_PX_TFD, AHCI_PX_TFD_STS_BSY) ||
RSET(AHCI_PX_CI, 1 << cmd->slot) ||
(cmd->props->ncq && RSET(AHCI_PX_SACT, 1 << cmd->slot))) {
usleep(50);
}
}
void ahci_command_issue(AHCIQState *ahci, AHCICommand *cmd)
{
ahci_command_issue_async(ahci, cmd);
ahci_command_wait(ahci, cmd);
}
void ahci_command_verify(AHCIQState *ahci, AHCICommand *cmd)
{
uint8_t slot = cmd->slot;
uint8_t port = cmd->port;
ahci_port_check_error(ahci, port, cmd->interrupts, cmd->errors);
ahci_port_check_interrupts(ahci, port, cmd->interrupts);
ahci_port_check_nonbusy(ahci, port, slot);
ahci_port_check_cmd_sanity(ahci, cmd);
if (cmd->interrupts & AHCI_PX_IS_DHRS) {
ahci_port_check_d2h_sanity(ahci, port, slot);
}
if (cmd->props->pio) {
ahci_port_check_pio_sanity(ahci, port, slot, cmd->xbytes);
}
}
uint8_t ahci_command_slot(AHCICommand *cmd)
{
return cmd->slot;
}
|