Gumstix 'connex' board support by Thorsten Zitterell.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3667 c046a42c-6fe2-441c-8c8c-71466251a162

5 files changed, 686 insertions, 1 deletions

diff --git a/Makefile.target b/Makefile.target
index 18938e8796..6100aa0923 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -499,6 +499,7 @@ VL_OBJS+= ssd0323.o pl061.o
 VL_OBJS+= arm-semi.o
 VL_OBJS+= pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
 VL_OBJS+= pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o max111x.o max7310.o
+VL_OBJS+= pflash_cfi01.o gumstix.o
 VL_OBJS+= spitz.o ads7846.o ide.o serial.o nand.o ecc.o wm8750.o
 VL_OBJS+= omap.o omap_lcdc.o omap1_clk.o omap_mmc.o omap_i2c.o
 VL_OBJS+= palm.o tsc210x.o
diff --git a/hw/gumstix.c b/hw/gumstix.c
new file mode 100644
index 0000000000..a8f8a2fabb
--- /dev/null
+++ b/hw/gumstix.c
@@ -0,0 +1,73 @@
+/*
+ * Gumstix Platforms
+ *
+ * Copyright (c) 2007 by Thorsten Zitterell <info@bitmux.org>
+ *
+ * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
+ *
+ * This code is licensed under the GNU GPL v2.
+ */
+
+#include "vl.h"
+
+static void connex_smc_irq(void *opaque, int line, int level)
+{
+    /* Interrupt line of NIC is connected to GPIO line 36 */
+    struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
+    pxa2xx_gpio_set(cpu->gpio, 36, level);
+}
+
+/* Board init. */
+enum gumstix_model_e { connex };
+
+static void gumstix_common_init(int ram_size, int vga_ram_size,
+                DisplayState *ds, const char *kernel_filename,
+                const char *kernel_cmdline, const char *initrd_filename,
+                const char *cpu_model, enum gumstix_model_e model)
+{
+    struct pxa2xx_state_s *cpu;
+
+    uint32_t gumstix_rom = 0x02000000;
+    uint32_t gumstix_ram = 0x08000000;
+
+    if (ram_size < (gumstix_ram + gumstix_rom + PXA2XX_INTERNAL_SIZE)) {
+        fprintf(stderr, "This platform requires %i bytes of memory\n",
+                gumstix_ram + gumstix_rom + PXA2XX_INTERNAL_SIZE);
+        exit(1);
+    }
+
+    cpu = pxa255_init(gumstix_ram, ds);
+
+    if (pflash_table[0] == NULL) {
+        fprintf(stderr, "A flash image must be given with the "
+                "'pflash' parameter\n");
+        exit(1);
+    }
+
+    if (!pflash_register(0x00000000, gumstix_ram + PXA2XX_INTERNAL_SIZE,
+            pflash_table[0], 128 * 1024, 128, 2, 0, 0, 0, 0)) {
+        fprintf(stderr, "qemu: Error register flash memory.\n");
+        exit(1);
+    }
+
+    cpu->env->regs[15] = 0x00000000;
+
+    qemu_irq *irq = qemu_allocate_irqs(connex_smc_irq, cpu, 1);
+    smc91c111_init(&nd_table[0], 0x04000300, *irq);
+}
+
+static void connex_init(int ram_size, int vga_ram_size,
+                const char *boot_device, DisplayState *ds,
+                const char **fd_filename, int snapshot,
+                const char *kernel_filename, const char *kernel_cmdline,
+                const char *initrd_filename, const char *cpu_model)
+{
+    gumstix_common_init(ram_size, vga_ram_size, ds, kernel_filename,
+                kernel_cmdline, initrd_filename, cpu_model, connex);
+}
+
+QEMUMachine connex_machine = {
+    "connex",
+    "Gumstix Connex (PXA255)",
+    connex_init,
+};
diff --git a/hw/pflash_cfi01.c b/hw/pflash_cfi01.c
new file mode 100644
index 0000000000..22bf025ffb
--- /dev/null
+++ b/hw/pflash_cfi01.c
@@ -0,0 +1,606 @@
+/*
+ *  CFI parallel flash with Intel command set emulation
+ *
+ *  Copyright (c) 2006 Thorsten Zitterell
+ *  Copyright (c) 2005 Jocelyn Mayer
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
+ * Supported commands/modes are:
+ * - flash read
+ * - flash write
+ * - flash ID read
+ * - sector erase
+ * - CFI queries
+ *
+ * It does not support timings
+ * It does not support flash interleaving
+ * It does not implement software data protection as found in many real chips
+ * It does not implement erase suspend/resume commands
+ * It does not implement multiple sectors erase
+ *
+ * It does not implement much more ...
+ */
+
+#include "vl.h"
+
+#define PFLASH_BUG(fmt, args...) \
+do { \
+    printf("PFLASH: Possible BUG - " fmt, ##args); \
+    exit(1); \
+} while(0)
+
+/* #define PFLASH_DEBUG */
+#ifdef PFLASH_DEBUG
+#define DPRINTF(fmt, args...)                      \
+do {                                               \
+        printf("PFLASH: " fmt , ##args);           \
+} while (0)
+#else
+#define DPRINTF(fmt, args...) do { } while (0)
+#endif
+
+struct pflash_t {
+    BlockDriverState *bs;
+    target_ulong base;
+    target_ulong sector_len;
+    target_ulong total_len;
+    int width;
+    int wcycle; /* if 0, the flash is read normally */
+    int bypass;
+    int ro;
+    uint8_t cmd;
+    uint8_t status;
+    uint16_t ident[4];
+    uint8_t cfi_len;
+    uint8_t cfi_table[0x52];
+    target_ulong counter;
+    QEMUTimer *timer;
+    ram_addr_t off;
+    int fl_mem;
+    void *storage;
+};
+
+static void pflash_timer (void *opaque)
+{
+    pflash_t *pfl = opaque;
+
+    DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
+    /* Reset flash */
+    pfl->status ^= 0x80;
+    if (pfl->bypass) {
+        pfl->wcycle = 2;
+    } else {
+        cpu_register_physical_memory(pfl->base, pfl->total_len,
+                        pfl->off | IO_MEM_ROMD | pfl->fl_mem);
+        pfl->wcycle = 0;
+    }
+    pfl->cmd = 0;
+}
+
+static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
+{
+    target_ulong boff;
+    uint32_t ret;
+    uint8_t *p;
+
+    ret = -1;
+    offset -= pfl->base;
+    boff = offset & 0xFF; /* why this here ?? */
+
+    if (pfl->width == 2)
+        boff = boff >> 1;
+    else if (pfl->width == 4)
+        boff = boff >> 2;
+
+    DPRINTF("%s: reading offset %08x under cmd %02x\n",
+                    __func__, boff, pfl->cmd);
+
+    switch (pfl->cmd) {
+    case 0x00:
+        /* Flash area read */
+        p = pfl->storage;
+        switch (width) {
+        case 1:
+            ret = p[offset];
+            DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
+            break;
+        case 2:
+#if defined(TARGET_WORDS_BIGENDIAN)
+            ret = p[offset] << 8;
+            ret |= p[offset + 1];
+#else
+            ret = p[offset];
+            ret |= p[offset + 1] << 8;
+#endif
+            DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
+            break;
+        case 4:
+#if defined(TARGET_WORDS_BIGENDIAN)
+            ret = p[offset] << 24;
+            ret |= p[offset + 1] << 16;
+            ret |= p[offset + 2] << 8;
+            ret |= p[offset + 3];
+#else
+            ret = p[offset];
+            ret |= p[offset + 1] << 8;
+            ret |= p[offset + 1] << 8;
+            ret |= p[offset + 2] << 16;
+            ret |= p[offset + 3] << 24;
+#endif
+            DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
+            break;
+        default:
+            DPRINTF("BUG in %s\n", __func__);
+        }
+
+        break;
+    case 0x20: /* Block erase */
+    case 0x50: /* Clear status register */
+    case 0x60: /* Block /un)lock */
+    case 0x70: /* Status Register */
+    case 0xe8: /* Write block */
+        /* Status register read */
+        ret = pfl->status;
+        DPRINTF("%s: status %x\n", __func__, ret);
+        break;
+    case 0x98: /* Query mode */
+        if (boff > pfl->cfi_len)
+            ret = 0;
+        else
+            ret = pfl->cfi_table[boff];
+        break;
+    default:
+        /* This should never happen : reset state & treat it as a read */
+        DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
+        pfl->wcycle = 0;
+        pfl->cmd = 0;
+    }
+    return ret;
+}
+
+/* update flash content on disk */
+static void pflash_update(pflash_t *pfl, int offset,
+                          int size)
+{
+    int offset_end;
+    if (pfl->bs) {
+        offset_end = offset + size;
+        /* round to sectors */
+        offset = offset >> 9;
+        offset_end = (offset_end + 511) >> 9;
+        bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
+                   offset_end - offset);
+    }
+}
+
+static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
+                          int width)
+{
+    target_ulong boff;
+    uint8_t *p;
+    uint8_t cmd;
+
+    /* WARNING: when the memory area is in ROMD mode, the offset is a
+       ram offset, not a physical address */
+    cmd = value;
+
+    if (pfl->wcycle == 0)
+        offset -= (target_ulong)(long)pfl->storage;
+    else
+        offset -= pfl->base;
+
+    DPRINTF("%s: offset %08x %08x %d wcycle 0x%x\n",
+                    __func__, offset, value, width, pfl->wcycle);
+
+    /* Set the device in I/O access mode */
+    cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem);
+    boff = offset & (pfl->sector_len - 1);
+
+    if (pfl->width == 2)
+        boff = boff >> 1;
+    else if (pfl->width == 4)
+        boff = boff >> 2;
+
+    switch (pfl->wcycle) {
+    case 0:
+        /* read mode */
+        switch (cmd) {
+        case 0x00: /* ??? */
+            goto reset_flash;
+        case 0x20: /* Block erase */
+            p = pfl->storage;
+            offset &= ~(pfl->sector_len - 1);
+
+            DPRINTF("%s: block erase at 0x%x bytes 0x%x\n", __func__,
+                            offset, pfl->sector_len);
+
+            memset(p + offset, 0xff, pfl->sector_len);
+            pflash_update(pfl, offset, pfl->sector_len);
+            pfl->status |= 0x80; /* Ready! */
+            break;
+        case 0x50: /* Clear status bits */
+            DPRINTF("%s: Clear status bits\n", __func__);
+            pfl->status = 0x0;
+            goto reset_flash;
+        case 0x60: /* Block (un)lock */
+            DPRINTF("%s: Block unlock\n", __func__);
+            break;
+        case 0x70: /* Status Register */
+            DPRINTF("%s: Read status register\n", __func__);
+            pfl->cmd = cmd;
+            return;
+        case 0x98: /* CFI query */
+            DPRINTF("%s: CFI query\n", __func__);
+            break;
+        case 0xe8: /* Write to buffer */
+            DPRINTF("%s: Write to buffer\n", __func__);
+            pfl->status |= 0x80; /* Ready! */
+            break;
+        case 0xff: /* Read array mode */
+            DPRINTF("%s: Read array mode\n", __func__);
+            goto reset_flash;
+        default:
+            goto error_flash;
+        }
+        pfl->wcycle++;
+        pfl->cmd = cmd;
+        return;
+    case 1:
+        switch (pfl->cmd) {
+        case 0x20: /* Block erase */
+        case 0x28:
+            if (cmd == 0xd0) { /* confirm */
+                pfl->wcycle = 1;
+                pfl->status |= 0x80;
+            } if (cmd == 0xff) { /* read array mode */
+                goto reset_flash;
+            } else
+                goto error_flash;
+
+            break;
+        case 0xe8:
+            DPRINTF("%s: block write of 0x%x bytes\n", __func__, cmd);
+            pfl->counter = cmd;
+            pfl->wcycle++;
+            break;
+        case 0x60:
+            if (cmd == 0xd0) {
+                pfl->wcycle = 0;
+                pfl->status |= 0x80;
+            } else if (cmd == 0x01) {
+                pfl->wcycle = 0;
+                pfl->status |= 0x80;
+            } else if (cmd == 0xff) {
+                goto reset_flash;
+            } else {
+                DPRINTF("%s: Unknown (un)locking command\n", __func__);
+                goto reset_flash;
+            }
+            break;
+        case 0x98:
+            if (cmd == 0xff) {
+                goto reset_flash;
+            } else {
+                DPRINTF("%s: leaving query mode\n", __func__);
+            }
+            break;
+        default:
+            goto error_flash;
+        }
+        return;
+    case 2:
+        switch (pfl->cmd) {
+        case 0xe8: /* Block write */
+            p = pfl->storage;
+            DPRINTF("%s: block write offset 0x%x value 0x%x counter 0x%x\n",
+                            __func__, offset, value, pfl->counter);
+            switch (width) {
+            case 1:
+                p[offset] = value;
+                pflash_update(pfl, offset, 1);
+                break;
+            case 2:
+#if defined(TARGET_WORDS_BIGENDIAN)
+                p[offset] = value >> 8;
+                p[offset + 1] = value;
+#else
+                p[offset] = value;
+                p[offset + 1] = value >> 8;
+#endif
+                pflash_update(pfl, offset, 2);
+                break;
+            case 4:
+#if defined(TARGET_WORDS_BIGENDIAN)
+                p[offset] = value >> 24;
+                p[offset + 1] = value >> 16;
+                p[offset + 2] = value >> 8;
+                p[offset + 3] = value;
+#else
+                p[offset] = value;
+                p[offset + 1] = value >> 8;
+                p[offset + 2] = value >> 16;
+                p[offset + 3] = value >> 24;
+#endif
+                pflash_update(pfl, offset, 4);
+                break;
+            }
+
+            pfl->status |= 0x80;
+
+            if (!pfl->counter) {
+                DPRINTF("%s: block write finished\n", __func__);
+                pfl->wcycle++;
+            }
+
+            pfl->counter--;
+            break;
+        }
+        return;
+    case 3: /* Confirm mode */
+        switch (pfl->cmd) {
+        case 0xe8: /* Block write */
+            if (cmd == 0xd0) {
+                pfl->wcycle = 0;
+                pfl->status |= 0x80;
+                break;
+            } else {
+                DPRINTF("%s: unknown command for \"write block\"\n", __func__);
+                PFLASH_BUG("Write block confirm");
+            }
+        }
+        return;
+    default:
+        /* Should never happen */
+        DPRINTF("%s: invalid write state\n",  __func__);
+        goto reset_flash;
+    }
+    return;
+
+ error_flash:
+    printf("%s: Unimplemented flash cmd sequence "
+                    "(offset 0x%x, wcycle 0x%x cmd 0x%x value 0x%x\n",
+                    __func__, offset, pfl->wcycle, pfl->cmd, value);
+
+ reset_flash:
+    cpu_register_physical_memory(pfl->base, pfl->total_len,
+                    pfl->off | IO_MEM_ROMD | pfl->fl_mem);
+
+    pfl->bypass = 0;
+    pfl->wcycle = 0;
+    pfl->cmd = 0;
+    return;
+}
+
+
+static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr)
+{
+    return pflash_read(opaque, addr, 1);
+}
+
+static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr)
+{
+    pflash_t *pfl = opaque;
+
+    return pflash_read(pfl, addr, 2);
+}
+
+static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr)
+{
+    pflash_t *pfl = opaque;
+
+    return pflash_read(pfl, addr, 4);
+}
+
+static void pflash_writeb (void *opaque, target_phys_addr_t addr,
+                           uint32_t value)
+{
+    pflash_write(opaque, addr, value, 1);
+}
+
+static void pflash_writew (void *opaque, target_phys_addr_t addr,
+                           uint32_t value)
+{
+    pflash_t *pfl = opaque;
+
+    pflash_write(pfl, addr, value, 2);
+}
+
+static void pflash_writel (void *opaque, target_phys_addr_t addr,
+                           uint32_t value)
+{
+    pflash_t *pfl = opaque;
+
+    pflash_write(pfl, addr, value, 4);
+}
+
+static CPUWriteMemoryFunc *pflash_write_ops[] = {
+    &pflash_writeb,
+    &pflash_writew,
+    &pflash_writel,
+};
+
+static CPUReadMemoryFunc *pflash_read_ops[] = {
+    &pflash_readb,
+    &pflash_readw,
+    &pflash_readl,
+};
+
+/* Count trailing zeroes of a 32 bits quantity */
+static int ctz32 (uint32_t n)
+{
+    int ret;
+
+    ret = 0;
+    if (!(n & 0xFFFF)) {
+        ret += 16;
+        n = n >> 16;
+    }
+    if (!(n & 0xFF)) {
+        ret += 8;
+        n = n >> 8;
+    }
+    if (!(n & 0xF)) {
+        ret += 4;
+        n = n >> 4;
+    }
+    if (!(n & 0x3)) {
+        ret += 2;
+        n = n >> 2;
+    }
+    if (!(n & 0x1)) {
+        ret++;
+        n = n >> 1;
+    }
+#if 0 /* This is not necessary as n is never 0 */
+    if (!n)
+        ret++;
+#endif
+
+    return ret;
+}
+
+pflash_t *pflash_register (target_phys_addr_t base, ram_addr_t off,
+                           BlockDriverState *bs,
+                           target_ulong sector_len, int nb_blocs, int width,
+                           uint16_t id0, uint16_t id1,
+                           uint16_t id2, uint16_t id3)
+{
+    pflash_t *pfl;
+    target_long total_len;
+
+    total_len = sector_len * nb_blocs;
+
+    /* XXX: to be fixed */
+    if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
+        total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
+        return NULL;
+
+    pfl = qemu_mallocz(sizeof(pflash_t));
+
+    if (pfl == NULL)
+        return NULL;
+    pfl->storage = phys_ram_base + off;
+    pfl->fl_mem = cpu_register_io_memory(0,
+                    pflash_read_ops, pflash_write_ops, pfl);
+    pfl->off = off;
+    cpu_register_physical_memory(base, total_len,
+                    off | pfl->fl_mem | IO_MEM_ROMD);
+
+    pfl->bs = bs;
+    if (pfl->bs) {
+        /* read the initial flash content */
+        bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9);
+    }
+#if 0 /* XXX: there should be a bit to set up read-only,
+       *      the same way the hardware does (with WP pin).
+       */
+    pfl->ro = 1;
+#else
+    pfl->ro = 0;
+#endif
+    pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
+    pfl->base = base;
+    pfl->sector_len = sector_len;
+    pfl->total_len = total_len;
+    pfl->width = width;
+    pfl->wcycle = 0;
+    pfl->cmd = 0;
+    pfl->status = 0;
+    pfl->ident[0] = id0;
+    pfl->ident[1] = id1;
+    pfl->ident[2] = id2;
+    pfl->ident[3] = id3;
+    /* Hardcoded CFI table */
+    pfl->cfi_len = 0x52;
+    /* Standard "QRY" string */
+    pfl->cfi_table[0x10] = 'Q';
+    pfl->cfi_table[0x11] = 'R';
+    pfl->cfi_table[0x12] = 'Y';
+    /* Command set (Intel) */
+    pfl->cfi_table[0x13] = 0x01;
+    pfl->cfi_table[0x14] = 0x00;
+    /* Primary extended table address (none) */
+    pfl->cfi_table[0x15] = 0x31;
+    pfl->cfi_table[0x16] = 0x00;
+    /* Alternate command set (none) */
+    pfl->cfi_table[0x17] = 0x00;
+    pfl->cfi_table[0x18] = 0x00;
+    /* Alternate extended table (none) */
+    pfl->cfi_table[0x19] = 0x00;
+    pfl->cfi_table[0x1A] = 0x00;
+    /* Vcc min */
+    pfl->cfi_table[0x1B] = 0x45;
+    /* Vcc max */
+    pfl->cfi_table[0x1C] = 0x55;
+    /* Vpp min (no Vpp pin) */
+    pfl->cfi_table[0x1D] = 0x00;
+    /* Vpp max (no Vpp pin) */
+    pfl->cfi_table[0x1E] = 0x00;
+    /* Reserved */
+    pfl->cfi_table[0x1F] = 0x07;
+    /* Timeout for min size buffer write */
+    pfl->cfi_table[0x20] = 0x07;
+    /* Typical timeout for block erase */
+    pfl->cfi_table[0x21] = 0x0a;
+    /* Typical timeout for full chip erase (4096 ms) */
+    pfl->cfi_table[0x22] = 0x00;
+    /* Reserved */
+    pfl->cfi_table[0x23] = 0x04;
+    /* Max timeout for buffer write */
+    pfl->cfi_table[0x24] = 0x04;
+    /* Max timeout for block erase */
+    pfl->cfi_table[0x25] = 0x04;
+    /* Max timeout for chip erase */
+    pfl->cfi_table[0x26] = 0x00;
+    /* Device size */
+    pfl->cfi_table[0x27] = ctz32(total_len); // + 1;
+    /* Flash device interface (8 & 16 bits) */
+    pfl->cfi_table[0x28] = 0x02;
+    pfl->cfi_table[0x29] = 0x00;
+    /* Max number of bytes in multi-bytes write */
+    pfl->cfi_table[0x2A] = 0x04;
+    pfl->cfi_table[0x2B] = 0x00;
+    /* Number of erase block regions (uniform) */
+    pfl->cfi_table[0x2C] = 0x01;
+    /* Erase block region 1 */
+    pfl->cfi_table[0x2D] = nb_blocs - 1;
+    pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
+    pfl->cfi_table[0x2F] = sector_len >> 8;
+    pfl->cfi_table[0x30] = sector_len >> 16;
+
+    /* Extended */
+    pfl->cfi_table[0x31] = 'P';
+    pfl->cfi_table[0x32] = 'R';
+    pfl->cfi_table[0x33] = 'I';
+
+    pfl->cfi_table[0x34] = '1';
+    pfl->cfi_table[0x35] = '1';
+
+    pfl->cfi_table[0x36] = 0x00;
+    pfl->cfi_table[0x37] = 0x00;
+    pfl->cfi_table[0x38] = 0x00;
+    pfl->cfi_table[0x39] = 0x00;
+
+    pfl->cfi_table[0x3a] = 0x00;
+
+    pfl->cfi_table[0x3b] = 0x00;
+    pfl->cfi_table[0x3c] = 0x00;
+
+    return pfl;
+}
diff --git a/vl.c b/vl.c
index 166bacf310..8defc30eef 100644
--- a/vl.c
+++ b/vl.c
@@ -7435,6 +7435,7 @@ void register_machines(void)
     qemu_register_machine(&palmte_machine);
     qemu_register_machine(&lm3s811evb_machine);
     qemu_register_machine(&lm3s6965evb_machine);
+    qemu_register_machine(&connex_machine);
 #elif defined(TARGET_SH4)
     qemu_register_machine(&shix_machine);
     qemu_register_machine(&r2d_machine);
@@ -8260,7 +8261,8 @@ int main(int argc, char **argv)
     if (!linux_boot && net_boot == 0 &&
         hd_filename[0] == '\0' &&
         (cdrom_index >= 0 && hd_filename[cdrom_index] == '\0') &&
-        fd_filename[0] == '\0')
+        fd_filename[0] == '\0' &&
+        pflash_filename[0] == '\0')
         help(1);
 
     /* boot to floppy or the default cd if no hard disk defined yet */
diff --git a/vl.h b/vl.h
index affffad939..752bccd740 100644
--- a/vl.h
+++ b/vl.h
@@ -1254,6 +1254,9 @@ extern QEMUMachine spitzpda_machine;
 extern QEMUMachine borzoipda_machine;
 extern QEMUMachine terrierpda_machine;
 
+/* gumstix.c */
+extern QEMUMachine connex_machine;
+
 /* palm.c */
 extern QEMUMachine palmte_machine;