summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-21drm/exynos/decon5433: fix software trigger maskAndrzej Hajda1-2/+2
The patch fixes copy/paste bug introduced during code refactoring. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b93c2e8b5d9d ("drm/exynos/decon5433: configure sysreg in case of hardware trigger")Fixes: Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-03-21drm/exynos/decon5433: signal frame done interrupt at front porchAndrzej Hajda1-1/+1
DECON in case of video mode generates interrupt by default at start of vertical back porch. As this interrupt is used to generate VBLANK events more optimal point is start of vertical front porch. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-03-21drm/exynos/decon5433: fix vblank event handlingAndrzej Hajda1-1/+77
Current implementation of event handling assumes that vblank interrupt is always called at the right time. It is not true, it can be delayed due to various reasons. As a result different races can happen. The patch fixes the issue by using hardware frame counter present in DECON to serialize vblank and commit completion events. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-03-21drm/exynos: move crtc event handling to drivers callbacksAndrzej Hajda1-0/+1
CRTC event is currently send with next vblank, or instantly in case crtc is being disabled. This approach usually works, but in corner cases it can result in premature event generation. Only device driver is able to verify if the event can be sent. This patch is a first step in that direction - it moves event handling to the drivers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-03-21drm/exynos/decon5433: & vs | typoDan Carpenter1-1/+1
"&" was obviously intended instead of "|". The original condition is always true. Fixes: b93c2e8b5d9d ("drm/exynos/decon5433: configure sysreg in case of hardware trigger") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07drm/exynos/decon5433: signal vblank only on odd fieldsAndrzej Hajda1-0/+7
In case of interlace mode irq is generated for odd and even fields, but vblank should be signaled only for the last emitted field. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07drm/exynos/decon5433: add support for interlace modesAndrzej Hajda1-13/+32
Some registers should be programmed differently in interlace mode. Additionally IP does not signal stop state properly in interlaced mode, so warning has been removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07drm/exynos/decon5433: configure sysreg in case of hardware triggerAndrzej Hajda1-8/+32
In case of HW trigger mode, sysreg register should be configured to enable TE functionality. The patch refactors also trigger setup function. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-27Merge tag 'drm-misc-next-2017-01-23' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/git/drm-misc into drm-next - cleanups&fixes for dw-hdmi bride driver (Laurent) - updates for adv bridge driver (John Stultz) for nexus - drm_crtc_from_index helper rollout (Shawn Guo) - removing drm_framebuffer_unregister_private from drivers&core - target_vblank (Andrey Grodzovsky) - misc tiny stuff * tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits) drm: qxl: Open code teardown function for qxl drm: qxl: Open code probing sequence for qxl drm/bridge: adv7511: Re-write the i2c address before EDID probing drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event() drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context drm: vc4: use crtc helper drm_crtc_from_index() drm: tegra: use crtc helper drm_crtc_from_index() drm: nouveau: use crtc helper drm_crtc_from_index() drm: mediatek: use crtc helper drm_crtc_from_index() drm: kirin: use crtc helper drm_crtc_from_index() drm: exynos: use crtc helper drm_crtc_from_index() dt-bindings: display: dw-hdmi: Clean up DT bindings documentation drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY drm: bridge: dw-hdmi: Fix the name of the PHY reset macros drm: bridge: dw-hdmi: Define and use macros for PHY register addresses drm: bridge: dw-hdmi: Detect PHY type at runtime drm: bridge: dw-hdmi: Handle overflow workaround based on device version ...
2017-01-27Merge branch 'master' of ↵Dave Airlie1-9/+6
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus master to get the connector locking revert. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits) sysctl: fix proc_doulongvec_ms_jiffies_minmax() Revert "drm/probe-helpers: Drop locking from poll_enable" MAINTAINERS: add Dan Streetman to zbud maintainers MAINTAINERS: add Dan Streetman to zswap maintainers mm: do not export ioremap_page_range symbol for external module mn10300: fix build error of missing fpu_save() romfs: use different way to generate fsid for BLOCK or MTD frv: add missing atomic64 operations mm, page_alloc: fix premature OOM when racing with cpuset mems update mm, page_alloc: move cpuset seqcount checking to slowpath mm, page_alloc: fix fast-path race with cpuset update or removal mm, page_alloc: fix check for NULL preferred_zone kernel/panic.c: add missing \n fbdev: color map copying bounds checking frv: add atomic64_add_unless() mm/mempolicy.c: do not put mempolicy before using its nodemask radix-tree: fix private list warnings Documentation/filesystems/proc.txt: add VmPin mm, memcg: do not retry precharge charges proc: add a schedule point in proc_pid_readdir() ...
2017-01-20drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablementAndrzej Hajda1-0/+2
DECON_TV requires STANDALONE_UPDATE after output enabling, otherwise it does not start. This change is neutral for DECON. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-20drm/exynos/decon5433: fix CMU programmingAndrzej Hajda1-4/+0
DECON_CMU register has reserved bits which should not be zeroed, otherwise IP can behave strangely and cause IOMMU faults. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-20drm/exynos/decon5433: do not disable video after resetAndrzej Hajda1-2/+0
decon_commit is called just after reset so video is disabled anyway. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-13drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabledAndrzej Hajda1-3/+5
STANDALONE_UPDATE_F should be set if something changed in plane configurations, including plane disable. The patch fixes page-faults bugs, caused by decon still using framebuffers of disabled planes. v2: fixed clear-bit code (Thx Marek) v3: use test_and_clear_bit (Thx Joonyoung) Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-13drm/exynos/decon5433: update shadow registers iff there are active windowsAndrzej Hajda1-4/+3
Improper usage of DECON_UPDATE register leads to subtle errors. If it set in decon_commit when there are no active windows it results in slow registry updates - all subsequent shadow registry updates takes more than full vblank. On the other side if it is not set when there are active windows it results in garbage on the screen after suspend/resume of FB console. The patch hopefully fixes it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-10drm/exynos: constify exynos_drm_crtc_ops structuresBhumika Goyal1-1/+1
Declare exynos_drm_crtc_ops structures as const as they are only passed as an argument to the function exynos_drm_crtc_create. This argument is of type const struct exynos_drm_crtc_ops *, so exynos_drm_crtc_ops structures having this property can be declared const. Done using Coccinelle: @r disable optional_qualifier@ identifier i; position p; @@ static struct exynos_drm_crtc_ops i@p={...}; @ok@ position p; identifier r.i; @@ exynos_drm_crtc_create(...,&i@p,...) @bad@ position p!={r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ +const struct exynos_drm_crtc_ops i; File size before: text data bss dec hex filename 5008 280 0 5288 14a8 exynos/exynos5433_drm_decon.o File size after: text data bss dec hex filename 5120 176 0 5296 14b0 exynos/exynos5433_drm_decon.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483984493-25284-1-git-send-email-bhumirks@gmail.com
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä1-1/+1
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Nuke fb->bits_per_pixelVille Syrjälä1-2/+2
Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-01drm/exynos: use drm core to handle page-flip eventAndrzej Hajda1-11/+0
Exynos DRM framework handled page-flip event with custom code. The patch replaces it with drm-core vblank queue. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos/decon5433: fix trigger configurationAndrzej Hajda1-6/+4
It seems trigger cannot be configured too early, otherwise it does not work in case of panel. The patch fixes also trigger flag logic, previously HW-TRIGGER flag was cleared in case of panel - as a result panel used always software trigger. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos/decon5433: do not use unnecessary software triggerAndrzej Hajda1-1/+2
Software trigger should not be used if hardware trigger is configured. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos/decon5433: handle vblank in vblank interruptAndrzej Hajda1-2/+1
vblank should be signaled to userspace after reading framebuffers not before, signaling it in TE interrupt looks wrong. TE triggers reading framebuffers so it is the worst moment. Tearing is not observable because hardware prevents it, but there are frequently skipped vblank events. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: clean up register definions for fimd and deconInki Dae1-1/+1
This patch removes suffixes from I80 relevant register definitions, which are misleading. This is based on top of below patch set, http://www.spinics.net/lists/dri-devel/msg104057.html Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: decon: clean up interface typeInki Dae1-26/+29
This patch cleans up interface type relevant codes. Trigger mode is determinded only by i80 mode, which isn't related to Display types - HDMI or Display controller. So this patch makes the trigger mode to be set only in case of i80 mode - For DECON-TV, HW Trigger mode is flaged mandatorily because HDMI Timing Generator generates VSYNC signal which works as a hardware trigger. Changelog v2. - If interface type is HDMI then set out_type to I80. - fix compile warning. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: exynos5433_decon: use generic of_device_get_match_data helperMarek Szyprowski1-4/+1
Simplify code by replacing custom code by generic helper. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: enable HDMI-PHY before configuring DECONAndrzej Hajda1-0/+4
According to documentation and tests HDMI-PHY must be on prior to MIXER configuration. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
2016-04-30drm/exynos/decon5433: do not protect window in plane disableAndrzej Hajda1-5/+0
decon_atomic_begin and decon_atomic_flush protects all windows already. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: reset decon on startAndrzej Hajda1-0/+2
Resetting IP at starting ensures that DECON will be in known state regardless of changes by bootloader. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: fix DECON standalone updateAndrzej Hajda1-7/+8
DECON should be updated after un-protecting windows and after changing output parameters, otherwise image is not displayed in case of HDMI path. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/decon: make irq handler staticAndrzej Hajda1-1/+1
The function is used only locally. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/decon: fix disable clocks orderAndrzej Hajda1-2/+2
Decon requires that clocks should be disabled in reverse order. Otherwise system hangs. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: exynos5433_decon: fix wrong state in decon_vblank_enableMarek Szyprowski1-1/+1
BIT_IRQS_ENABLED was never set because of incorrect test in decon_vlank_enable() function, what resulted in lack of enabling vblank support. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: exynos5433_decon: fix wrong state assignment in decon_enableMarek Szyprowski1-2/+0
Patch ebf3fd403b79ba6561bd1a4bb5a7cacc99da08e5 ("drm/exynos: add pm_runtime to DECON 5433") removed some code from decon_enable() function, but it left set_bit(BIT_SUSPENDED, &ctx->flags) call, which was earlier called only in error path. This patch removes it, what finally lets driver to go out of suspended state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-13drm/exynos: crtc: rework atomic_{begin,flush}Marek Szyprowski1-6/+8
Some CRTC drivers (like Exynos DRM Mixer) can handle blocking register updates only on per-device level, not per-plane level. This patch changes exynos_crts atomic_begin/atomic_flush callbacks to handle the entire crtc, instead of given planes, so driver can handle both cases on their own. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-13drm/exynos: rename zpos to indexMarek Szyprowski1-5/+5
This patch renames zpos entry to index, because in most places it is used as index for selecting hardware layer/window instead of configurable layer position. This will later enable to make the zpos property configurable. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: introduce exynos_drm_plane_config structureMarek Szyprowski1-5/+13
This patch adds common structure for keeping plane configuration and capabilities data. This patch is inspired by similar code developed by Tobias Jakobi. Changelog v2: - fix vidi_win_types(i) call. vidi_win_types is not a function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: introduce exynos_drm_plane_state structureMarek Szyprowski1-10/+11
This patch introduces exynos_drm_plane_state structure, which subclasses drm_plane_state and holds precalculated data suitable for configuring Exynos hardware. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: move dma_addr attribute from exynos plane to exynos fbMarek Szyprowski1-5/+8
DMA address is a framebuffer attribute and the right place for it is exynos_drm_framebuffer not exynos_drm_plane. This patch also introduces helper function for getting dma address of the given framebuffer. Changelog v2: - use state->fb instead of plane->base.fb. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: decon: remove unused variablesInki Dae1-2/+0
This patch just removes unused variables, i and ret. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-12-13drm/exynos: add pm_runtime to DECON 5433Gustavo Padovan1-15/+39
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Changelog v3: - Change CONFIG_PM_SLEEP -> CONFIG_PM Changelog v2: - no change Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03drm/exynos/decon5433: add support for DECON-TVAndrzej Hajda1-61/+93
DECON-TV IP is responsible for generating video stream which is transferred to HDMI IP. It is almost fully compatible with DECON IP. The patch is based on initial work of Hyungwon Hwang. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03drm/exynos/decon5433: remove duplicated initializationAndrzej Hajda1-1/+0
Field .commit is already initialized few lines above. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03drm/exynos/decon5433: merge different flag fieldsAndrzej Hajda1-31/+30
Driver uses four different fields for internal flags. They can be merged into one. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03drm/exynos/decon5433: add function to set particular register bitsAndrzej Hajda1-50/+19
The driver often sets only particular bits of configuration registers. Using separate function to such action simplifies the code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03drm/exynos/decon5433: fix timing registers writesAndrzej Hajda1-9/+9
All timing registers should contain values decreased by one. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03drm/exynos/decon5433: add PCLK clockAndrzej Hajda1-10/+11
PCLK clock is used by DECON IP. The patch also replaces magic number with number of clocks in array definition. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26drm/exynos: add cursor plane supportGustavo Padovan1-2/+2
Set one of the planes for each crtc driver as a cursor plane enabled window managers to fully work on exynos. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26drm/exynos: add global macro for the default primary planeGustavo Padovan1-4/+2
Define DEFAULT_WIN as zero to help set the primary plane on all CRTCs. Some CRTCs were defining a variable to store the default window, but that is not necessary as the default (primary) window is always the window zero. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-31drm/exynos: Properly report supported formats for each deviceMarek Szyprowski1-1/+9
Exynos DRM reported that all planes for all supported sub-devices supports only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each Exynos DRM sub-drivers to provide the list of supported pixel formats and registers this list to DRM core. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-31drm/exynos: implement atomic_{begin/flush} of DECONHyungwon Hwang1-7/+27
Each CRTC's atomic_{begin/flush} must stop/start the update of shadow registers to active register in the functions. This patch achieves these purpose by moving the setting of protection bits to those functions from decon_update_plane. v2: rebased to the branch exynos-drm-next Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 05:40:39 +0000