diff options
Diffstat (limited to 'drivers/scsi/sata_vsc.c')
| -rw-r--r-- | drivers/scsi/sata_vsc.c | 125 |
1 files changed, 68 insertions, 57 deletions
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index e484e8db6810..836bbbb26ff2 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -47,52 +47,58 @@ #include <linux/libata.h> #define DRV_NAME "sata_vsc" -#define DRV_VERSION "1.1" - -/* Interrupt register offsets (from chip base address) */ -#define VSC_SATA_INT_STAT_OFFSET 0x00 -#define VSC_SATA_INT_MASK_OFFSET 0x04 - -/* Taskfile registers offsets */ -#define VSC_SATA_TF_CMD_OFFSET 0x00 -#define VSC_SATA_TF_DATA_OFFSET 0x00 -#define VSC_SATA_TF_ERROR_OFFSET 0x04 -#define VSC_SATA_TF_FEATURE_OFFSET 0x06 -#define VSC_SATA_TF_NSECT_OFFSET 0x08 -#define VSC_SATA_TF_LBAL_OFFSET 0x0c -#define VSC_SATA_TF_LBAM_OFFSET 0x10 -#define VSC_SATA_TF_LBAH_OFFSET 0x14 -#define VSC_SATA_TF_DEVICE_OFFSET 0x18 -#define VSC_SATA_TF_STATUS_OFFSET 0x1c -#define VSC_SATA_TF_COMMAND_OFFSET 0x1d -#define VSC_SATA_TF_ALTSTATUS_OFFSET 0x28 -#define VSC_SATA_TF_CTL_OFFSET 0x29 - -/* DMA base */ -#define VSC_SATA_UP_DESCRIPTOR_OFFSET 0x64 -#define VSC_SATA_UP_DATA_BUFFER_OFFSET 0x6C -#define VSC_SATA_DMA_CMD_OFFSET 0x70 - -/* SCRs base */ -#define VSC_SATA_SCR_STATUS_OFFSET 0x100 -#define VSC_SATA_SCR_ERROR_OFFSET 0x104 -#define VSC_SATA_SCR_CONTROL_OFFSET 0x108 - -/* Port stride */ -#define VSC_SATA_PORT_OFFSET 0x200 - -/* Error interrupt status bit offsets */ -#define VSC_SATA_INT_ERROR_E_OFFSET 2 -#define VSC_SATA_INT_ERROR_P_OFFSET 4 -#define VSC_SATA_INT_ERROR_T_OFFSET 5 -#define VSC_SATA_INT_ERROR_M_OFFSET 1 +#define DRV_VERSION "1.2" + +enum { + /* Interrupt register offsets (from chip base address) */ + VSC_SATA_INT_STAT_OFFSET = 0x00, + VSC_SATA_INT_MASK_OFFSET = 0x04, + + /* Taskfile registers offsets */ + VSC_SATA_TF_CMD_OFFSET = 0x00, + VSC_SATA_TF_DATA_OFFSET = 0x00, + VSC_SATA_TF_ERROR_OFFSET = 0x04, + VSC_SATA_TF_FEATURE_OFFSET = 0x06, + VSC_SATA_TF_NSECT_OFFSET = 0x08, + VSC_SATA_TF_LBAL_OFFSET = 0x0c, + VSC_SATA_TF_LBAM_OFFSET = 0x10, + VSC_SATA_TF_LBAH_OFFSET = 0x14, + VSC_SATA_TF_DEVICE_OFFSET = 0x18, + VSC_SATA_TF_STATUS_OFFSET = 0x1c, + VSC_SATA_TF_COMMAND_OFFSET = 0x1d, + VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28, + VSC_SATA_TF_CTL_OFFSET = 0x29, + + /* DMA base */ + VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64, + VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C, + VSC_SATA_DMA_CMD_OFFSET = 0x70, + + /* SCRs base */ + VSC_SATA_SCR_STATUS_OFFSET = 0x100, + VSC_SATA_SCR_ERROR_OFFSET = 0x104, + VSC_SATA_SCR_CONTROL_OFFSET = 0x108, + + /* Port stride */ + VSC_SATA_PORT_OFFSET = 0x200, + + /* Error interrupt status bit offsets */ + VSC_SATA_INT_ERROR_CRC = 0x40, + VSC_SATA_INT_ERROR_T = 0x20, + VSC_SATA_INT_ERROR_P = 0x10, + VSC_SATA_INT_ERROR_R = 0x8, + VSC_SATA_INT_ERROR_E = 0x4, + VSC_SATA_INT_ERROR_M = 0x2, + VSC_SATA_INT_PHY_CHANGE = 0x1, + VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \ + VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \ + VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \ + VSC_SATA_INT_PHY_CHANGE), +}; + + #define is_vsc_sata_int_err(port_idx, int_status) \ - (int_status & ((1 << (VSC_SATA_INT_ERROR_E_OFFSET + (8 * port_idx))) | \ - (1 << (VSC_SATA_INT_ERROR_P_OFFSET + (8 * port_idx))) | \ - (1 << (VSC_SATA_INT_ERROR_T_OFFSET + (8 * port_idx))) | \ - (1 << (VSC_SATA_INT_ERROR_M_OFFSET + (8 * port_idx))) \ - )\ - ) + (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx))) static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) @@ -215,14 +221,6 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, ap = host_set->ports[i]; - if (is_vsc_sata_int_err(i, int_status)) { - u32 err_status; - printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); - err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0; - vsc_sata_scr_write(ap, SCR_ERROR, err_status); - handled++; - } - if (ap && !(ap->flags & (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; @@ -230,12 +228,26 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, qc = ata_qc_from_tag(ap, ap->active_tag); if (qc && (!(qc->tf.ctl & ATA_NIEN))) { handled += ata_host_intr(ap, qc); - } else { - printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); + } else if (is_vsc_sata_int_err(i, int_status)) { + /* + * On some chips (i.e. Intel 31244), an error + * interrupt will sneak in at initialization + * time (phy state changes). Clearing the SCR + * error register is not required, but it prevents + * the phy state change interrupts from recurring + * later. + */ + u32 err_status; + err_status = vsc_sata_scr_read(ap, SCR_ERROR); + printk(KERN_DEBUG "%s: clearing interrupt, " + "status %x; sata err status %x\n", + __FUNCTION__, + int_status, err_status); + vsc_sata_scr_write(ap, SCR_ERROR, err_status); + /* Clear interrupt status */ ata_chk_status(ap); handled++; } - } } } @@ -255,7 +267,6 @@ static struct scsi_host_template vsc_sata_sht = { .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, - .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, |