1 files changed, 101 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
new file mode 100644
index 000000000000..6e6523ea01ce
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@marvell.com>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+#ifndef SDHCI_XENON_H_
+#define SDHCI_XENON_H_
+
+/* Register Offset of Xenon SDHC self-defined register */
+#define XENON_SYS_CFG_INFO			0x0104
+#define XENON_SLOT_TYPE_SDIO_SHIFT		24
+#define XENON_NR_SUPPORTED_SLOT_MASK		0x7
+
+#define XENON_SYS_OP_CTRL			0x0108
+#define XENON_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
+#define XENON_SDCLK_IDLEOFF_ENABLE_SHIFT	8
+#define XENON_SLOT_ENABLE_SHIFT			0
+
+#define XENON_SYS_EXT_OP_CTRL			0x010C
+#define XENON_MASK_CMD_CONFLICT_ERR		BIT(8)
+
+#define XENON_SLOT_OP_STATUS_CTRL		0x0128
+#define XENON_TUN_CONSECUTIVE_TIMES_SHIFT	16
+#define XENON_TUN_CONSECUTIVE_TIMES_MASK	0x7
+#define XENON_TUN_CONSECUTIVE_TIMES		0x4
+#define XENON_TUNING_STEP_SHIFT			12
+#define XENON_TUNING_STEP_MASK			0xF
+#define XENON_TUNING_STEP_DIVIDER		BIT(6)
+
+#define XENON_SLOT_EMMC_CTRL			0x0130
+#define XENON_ENABLE_DATA_STROBE		BIT(24)
+
+#define XENON_SLOT_RETUNING_REQ_CTRL		0x0144
+/* retuning compatible */
+#define XENON_RETUNING_COMPATIBLE		0x1
+
+#define XENON_SLOT_EXT_PRESENT_STATE		0x014C
+#define XENON_DLL_LOCK_STATE			0x1
+
+#define XENON_SLOT_DLL_CUR_DLY_VAL		0x0150
+
+/* Tuning Parameter */
+#define XENON_TMR_RETUN_NO_PRESENT		0xF
+#define XENON_DEF_TUNING_COUNT			0x9
+
+#define XENON_DEFAULT_SDCLK_FREQ		400000
+#define XENON_LOWEST_SDCLK_FREQ			100000
+
+/* Xenon specific Mode Select value */
+#define XENON_CTRL_HS200			0x5
+#define XENON_CTRL_HS400			0x6
+
+struct xenon_priv {
+	unsigned char	tuning_count;
+	/* idx of SDHC */
+	u8		sdhc_id;
+
+	/*
+	 * eMMC/SD/SDIO require different register settings.
+	 * Xenon driver has to recognize card type
+	 * before mmc_host->card is not available.
+	 * This field records the card type during init.
+	 * It is updated in xenon_init_card().
+	 *
+	 * It is only valid during initialization after it is updated.
+	 * Do not access this variable in normal transfers after
+	 * initialization completes.
+	 */
+	unsigned int	init_card_type;
+
+	/*
+	 * The bus_width, timing, and clock fields in below
+	 * record the current ios setting of Xenon SDHC.
+	 * Driver will adjust PHY setting if any change to
+	 * ios affects PHY timing.
+	 */
+	unsigned char	bus_width;
+	unsigned char	timing;
+	unsigned int	clock;
+
+	int		phy_type;
+	/*
+	 * Contains board-specific PHY parameters
+	 * passed from device tree.
+	 */
+	void		*phy_params;
+	struct xenon_emmc_phy_regs *emmc_phy_regs;
+};
+
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
+void xenon_clean_phy(struct sdhci_host *host);
+int xenon_phy_parse_dt(struct device_node *np,
+		       struct sdhci_host *host);
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+			unsigned char signal_voltage);
+#endif