summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/pseries/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/pseries/setup.c')
-rw-r--r--arch/powerpc/platforms/pseries/setup.c241
1 files changed, 58 insertions, 183 deletions
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 9883bc7ea007..4ffcaa6f8670 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -57,7 +57,6 @@
#include <asm/time.h>
#include <asm/nvram.h>
#include <asm/pmc.h>
-#include <asm/mpic.h>
#include <asm/xics.h>
#include <asm/ppc-pci.h>
#include <asm/i8259.h>
@@ -77,8 +76,6 @@ EXPORT_SYMBOL(CMO_PageSize);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
-static struct device_node *pSeries_mpic_node;
-
static void pSeries_show_cpuinfo(struct seq_file *m)
{
struct device_node *root;
@@ -172,48 +169,7 @@ static void __init pseries_setup_i8259_cascade(void)
irq_set_chained_handler(cascade, pseries_8259_cascade);
}
-static void __init pseries_mpic_init_IRQ(void)
-{
- struct device_node *np;
- const unsigned int *opprop;
- unsigned long openpic_addr = 0;
- int naddr, n, i, opplen;
- struct mpic *mpic;
-
- np = of_find_node_by_path("/");
- naddr = of_n_addr_cells(np);
- opprop = of_get_property(np, "platform-open-pic", &opplen);
- if (opprop != NULL) {
- openpic_addr = of_read_number(opprop, naddr);
- printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
- }
- of_node_put(np);
-
- BUG_ON(openpic_addr == 0);
-
- /* Setup the openpic driver */
- mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
- MPIC_NO_RESET, 16, 0, " MPIC ");
- BUG_ON(mpic == NULL);
-
- /* Add ISUs */
- opplen /= sizeof(u32);
- for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
- unsigned long isuaddr = of_read_number(opprop + i, naddr);
- mpic_assign_isu(mpic, n, isuaddr);
- }
-
- /* Setup top-level get_irq */
- ppc_md.get_irq = mpic_get_irq;
-
- /* All ISUs are setup, complete initialization */
- mpic_init(mpic);
-
- /* Look for cascade */
- pseries_setup_i8259_cascade();
-}
-
-static void __init pseries_xics_init_IRQ(void)
+static void __init pseries_init_irq(void)
{
xics_init();
pseries_setup_i8259_cascade();
@@ -228,32 +184,6 @@ static void pseries_lpar_enable_pmcs(void)
plpar_hcall_norets(H_PERFMON, set, reset);
}
-static void __init pseries_discover_pic(void)
-{
- struct device_node *np;
- const char *typep;
-
- for_each_node_by_name(np, "interrupt-controller") {
- typep = of_get_property(np, "compatible", NULL);
- if (!typep)
- continue;
- if (strstr(typep, "open-pic")) {
- pSeries_mpic_node = of_node_get(np);
- ppc_md.init_IRQ = pseries_mpic_init_IRQ;
- setup_kexec_cpu_down_mpic();
- smp_init_pseries_mpic();
- return;
- } else if (strstr(typep, "ppc-xicp")) {
- ppc_md.init_IRQ = pseries_xics_init_IRQ;
- setup_kexec_cpu_down_xics();
- smp_init_pseries_xics();
- return;
- }
- }
- printk(KERN_ERR "pSeries_discover_pic: failed to recognize"
- " interrupt-controller\n");
-}
-
static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data)
{
struct of_reconfig_data *rd = data;
@@ -265,11 +195,8 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
case OF_RECONFIG_ATTACH_NODE:
parent = of_get_parent(np);
pdn = parent ? PCI_DN(parent) : NULL;
- if (pdn) {
- /* Create pdn and EEH device */
+ if (pdn)
pci_add_device_node_info(pdn->phb, np);
- eeh_dev_init(PCI_DN(np), pdn->phb);
- }
of_node_put(parent);
break;
@@ -367,7 +294,7 @@ static void pseries_lpar_idle(void)
{
/*
* Default handler to go into low thread priority and possibly
- * low power mode by cedeing processor to hypervisor
+ * low power mode by ceding processor to hypervisor
*/
/* Indicate to hypervisor that we are idle. */
@@ -392,15 +319,23 @@ static void pseries_lpar_idle(void)
* to ever be a problem in practice we can move this into a kernel thread to
* finish off the process later in boot.
*/
-long pSeries_enable_reloc_on_exc(void)
+void pseries_enable_reloc_on_exc(void)
{
long rc;
unsigned int delay, total_delay = 0;
while (1) {
rc = enable_reloc_on_exceptions();
- if (!H_IS_LONG_BUSY(rc))
- return rc;
+ if (!H_IS_LONG_BUSY(rc)) {
+ if (rc == H_P2) {
+ pr_info("Relocation on exceptions not"
+ " supported\n");
+ } else if (rc != H_SUCCESS) {
+ pr_warn("Unable to enable relocation"
+ " on exceptions: %ld\n", rc);
+ }
+ break;
+ }
delay = get_longbusy_msecs(rc);
total_delay += delay;
@@ -408,66 +343,81 @@ long pSeries_enable_reloc_on_exc(void)
pr_warn("Warning: Giving up waiting to enable "
"relocation on exceptions (%u msec)!\n",
total_delay);
- return rc;
+ return;
}
mdelay(delay);
}
}
-EXPORT_SYMBOL(pSeries_enable_reloc_on_exc);
+EXPORT_SYMBOL(pseries_enable_reloc_on_exc);
-long pSeries_disable_reloc_on_exc(void)
+void pseries_disable_reloc_on_exc(void)
{
long rc;
while (1) {
rc = disable_reloc_on_exceptions();
if (!H_IS_LONG_BUSY(rc))
- return rc;
+ break;
mdelay(get_longbusy_msecs(rc));
}
+ if (rc != H_SUCCESS)
+ pr_warning("Warning: Failed to disable relocation on "
+ "exceptions: %ld\n", rc);
}
-EXPORT_SYMBOL(pSeries_disable_reloc_on_exc);
+EXPORT_SYMBOL(pseries_disable_reloc_on_exc);
#ifdef CONFIG_KEXEC
static void pSeries_machine_kexec(struct kimage *image)
{
- long rc;
-
- if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
- rc = pSeries_disable_reloc_on_exc();
- if (rc != H_SUCCESS)
- pr_warning("Warning: Failed to disable relocation on "
- "exceptions: %ld\n", rc);
- }
+ if (firmware_has_feature(FW_FEATURE_SET_MODE))
+ pseries_disable_reloc_on_exc();
default_machine_kexec(image);
}
#endif
#ifdef __LITTLE_ENDIAN__
-long pseries_big_endian_exceptions(void)
+void pseries_big_endian_exceptions(void)
{
long rc;
while (1) {
rc = enable_big_endian_exceptions();
if (!H_IS_LONG_BUSY(rc))
- return rc;
+ break;
mdelay(get_longbusy_msecs(rc));
}
+
+ /*
+ * At this point it is unlikely panic() will get anything
+ * out to the user, since this is called very late in kexec
+ * but at least this will stop us from continuing on further
+ * and creating an even more difficult to debug situation.
+ *
+ * There is a known problem when kdump'ing, if cpus are offline
+ * the above call will fail. Rather than panicking again, keep
+ * going and hope the kdump kernel is also little endian, which
+ * it usually is.
+ */
+ if (rc && !kdump_in_progress())
+ panic("Could not enable big endian exceptions");
}
-static long pseries_little_endian_exceptions(void)
+void pseries_little_endian_exceptions(void)
{
long rc;
while (1) {
rc = enable_little_endian_exceptions();
if (!H_IS_LONG_BUSY(rc))
- return rc;
+ break;
mdelay(get_longbusy_msecs(rc));
}
+ if (rc) {
+ ppc_md.progress("H_SET_MODE LE exception fail", 0);
+ panic("Could not enable little endian exceptions");
+ }
}
#endif
@@ -492,7 +442,6 @@ static void __init find_and_init_phbs(void)
}
of_node_put(root);
- pci_devs_phb_init();
/*
* PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
@@ -506,7 +455,8 @@ static void __init pSeries_setup_arch(void)
set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
/* Discover PIC type and setup ppc_md accordingly */
- pseries_discover_pic();
+ smp_init_pseries();
+
/* openpic global configuration register (64-bit format). */
/* openpic Interrupt Source Unit pointer (64-bit format). */
@@ -537,18 +487,6 @@ static void __init pSeries_setup_arch(void)
}
ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
-
- if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
- long rc;
-
- rc = pSeries_enable_reloc_on_exc();
- if (rc == H_P2) {
- pr_info("Relocation on exceptions not supported\n");
- } else if (rc != H_SUCCESS) {
- pr_warn("Unable to enable relocation on exceptions: "
- "%ld\n", rc);
- }
- }
}
static int __init pSeries_init_panel(void)
@@ -682,9 +620,9 @@ static void pSeries_cmo_feature_init(void)
/*
* Early initialization. Relocation is on but do not reference unbolted pages
*/
-static void __init pSeries_init_early(void)
+static void __init pseries_init(void)
{
- pr_debug(" -> pSeries_init_early()\n");
+ pr_debug(" -> pseries_init()\n");
#ifdef CONFIG_HVC_CONSOLE
if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -701,7 +639,7 @@ static void __init pSeries_init_early(void)
pSeries_cmo_feature_init();
iommu_init_early_pSeries();
- pr_debug(" <- pSeries_init_early()\n");
+ pr_debug(" <- pseries_init()\n");
}
/**
@@ -732,49 +670,9 @@ static void pseries_power_off(void)
for (;;);
}
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-
-static int __init pseries_probe_fw_features(unsigned long node,
- const char *uname, int depth,
- void *data)
-{
- const char *prop;
- int len;
- static int hypertas_found;
- static int vec5_found;
-
- if (depth != 1)
- return 0;
-
- if (!strcmp(uname, "rtas") || !strcmp(uname, "rtas@0")) {
- prop = of_get_flat_dt_prop(node, "ibm,hypertas-functions",
- &len);
- if (prop) {
- powerpc_firmware_features |= FW_FEATURE_LPAR;
- fw_hypertas_feature_init(prop, len);
- }
-
- hypertas_found = 1;
- }
-
- if (!strcmp(uname, "chosen")) {
- prop = of_get_flat_dt_prop(node, "ibm,architecture-vec-5",
- &len);
- if (prop)
- fw_vec5_feature_init(prop, len);
-
- vec5_found = 1;
- }
-
- return hypertas_found && vec5_found;
-}
-
static int __init pSeries_probe(void)
{
- unsigned long root = of_get_flat_dt_root();
- const char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
+ const char *dtype = of_get_property(of_root, "device_type", NULL);
if (dtype == NULL)
return 0;
@@ -784,41 +682,17 @@ static int __init pSeries_probe(void)
/* Cell blades firmware claims to be chrp while it's not. Until this
* is fixed, we need to avoid those here.
*/
- if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0") ||
- of_flat_dt_is_compatible(root, "IBM,CBEA"))
+ if (of_machine_is_compatible("IBM,CPBW-1.0") ||
+ of_machine_is_compatible("IBM,CBEA"))
return 0;
- pr_debug("pSeries detected, looking for LPAR capability...\n");
-
- /* Now try to figure out if we are running on LPAR */
- of_scan_flat_dt(pseries_probe_fw_features, NULL);
-
-#ifdef __LITTLE_ENDIAN__
- if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
- long rc;
- /*
- * Tell the hypervisor that we want our exceptions to
- * be taken in little endian mode. If this fails we don't
- * want to use BUG() because it will trigger an exception.
- */
- rc = pseries_little_endian_exceptions();
- if (rc) {
- ppc_md.progress("H_SET_MODE LE exception fail", 0);
- panic("Could not enable little endian exceptions");
- }
- }
-#endif
-
- if (firmware_has_feature(FW_FEATURE_LPAR))
- hpte_init_lpar();
- else
- hpte_init_native();
-
pm_power_off = pseries_power_off;
pr_debug("Machine is%s LPAR !\n",
(powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
+ pseries_init();
+
return 1;
}
@@ -837,7 +711,7 @@ define_machine(pseries) {
.name = "pSeries",
.probe = pSeries_probe,
.setup_arch = pSeries_setup_arch,
- .init_early = pSeries_init_early,
+ .init_IRQ = pseries_init_irq,
.show_cpuinfo = pSeries_show_cpuinfo,
.log_error = pSeries_log_error,
.pcibios_fixup = pSeries_final_fixup,
@@ -853,6 +727,7 @@ define_machine(pseries) {
.machine_check_exception = pSeries_machine_check_exception,
#ifdef CONFIG_KEXEC
.machine_kexec = pSeries_machine_kexec,
+ .kexec_cpu_down = pseries_kexec_cpu_down,
#endif
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
.memory_block_size = pseries_memory_block_size,
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 20:58:45 +0000