diff options
| -rw-r--r-- | drivers/gpu/drm/radeon/cik.c | 3 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/evergreen.c | 3 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/r100.c | 10 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/radeon_display.c | 106 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/radeon_kms.c | 50 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/radeon_mode.h | 4 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/radeon_pm.c | 4 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/rs690.c | 10 | ||||
| -rw-r--r-- | drivers/gpu/drm/radeon/si.c | 3 |
9 files changed, 164 insertions, 29 deletions
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 6801a0c2631b..0154db43860c 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -9630,6 +9630,9 @@ static void dce8_program_watermarks(struct radeon_device *rdev, (rdev->disp_priority == 2)) { DRM_DEBUG_KMS("force priority to high\n"); } + + /* Save number of lines the linebuffer leads before the scanout */ + radeon_crtc->lb_vblank_lead_lines = DIV_ROUND_UP(lb_size, mode->crtc_hdisplay); } /* select wm A */ diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index f61d66495ba2..2ad462896896 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2372,6 +2372,9 @@ static void evergreen_program_watermarks(struct radeon_device *rdev, c.full = dfixed_div(c, a); priority_b_mark = dfixed_trunc(c); priority_b_cnt |= priority_b_mark & PRIORITY_MARK_MASK; + + /* Save number of lines the linebuffer leads before the scanout */ + radeon_crtc->lb_vblank_lead_lines = DIV_ROUND_UP(lb_size, mode->crtc_hdisplay); } /* select wm A */ diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 2df3c860beb3..9e7e2bf03b81 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3217,6 +3217,9 @@ void r100_bandwidth_update(struct radeon_device *rdev) uint32_t pixel_bytes1 = 0; uint32_t pixel_bytes2 = 0; + /* Guess line buffer size to be 8192 pixels */ + u32 lb_size = 8192; + if (!rdev->mode_info.mode_config_initialized) return; @@ -3631,6 +3634,13 @@ void r100_bandwidth_update(struct radeon_device *rdev) DRM_DEBUG_KMS("GRPH2_BUFFER_CNTL from to %x\n", (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL)); } + + /* Save number of lines the linebuffer leads before the scanout */ + if (mode1) + rdev->mode_info.crtcs[0]->lb_vblank_lead_lines = DIV_ROUND_UP(lb_size, mode1->crtc_hdisplay); + + if (mode2) + rdev->mode_info.crtcs[1]->lb_vblank_lead_lines = DIV_ROUND_UP(lb_size, mode2->crtc_hdisplay); } int r100_ring_test(struct radeon_device *rdev, struct radeon_ring *ring) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index a8d9927ed9eb..1eca0acac016 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -322,7 +322,9 @@ void radeon_crtc_handle_vblank(struct radeon_device *rdev, int crtc_id) * to complete in this vblank? */ if (update_pending && - (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, crtc_id, 0, + (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, + crtc_id, + USE_REAL_VBLANKSTART, &vpos, &hpos, NULL, NULL, &rdev->mode_info.crtcs[crtc_id]->base.hwmode)) && ((vpos >= (99 * rdev->mode_info.crtcs[crtc_id]->base.hwmode.crtc_vdisplay)/100) || @@ -401,6 +403,8 @@ static void radeon_flip_work_func(struct work_struct *__work) struct drm_crtc *crtc = &radeon_crtc->base; unsigned long flags; int r; + int vpos, hpos, stat, min_udelay; + struct drm_vblank_crtc *vblank = &crtc->dev->vblank[work->crtc_id]; down_read(&rdev->exclusive_lock); if (work->fence) { @@ -437,6 +441,41 @@ static void radeon_flip_work_func(struct work_struct *__work) /* set the proper interrupt */ radeon_irq_kms_pflip_irq_get(rdev, radeon_crtc->crtc_id); + /* If this happens to execute within the "virtually extended" vblank + * interval before the start of the real vblank interval then it needs + * to delay programming the mmio flip until the real vblank is entered. + * This prevents completing a flip too early due to the way we fudge + * our vblank counter and vblank timestamps in order to work around the + * problem that the hw fires vblank interrupts before actual start of + * vblank (when line buffer refilling is done for a frame). It + * complements the fudging logic in radeon_get_crtc_scanoutpos() for + * timestamping and radeon_get_vblank_counter_kms() for vblank counts. + * + * In practice this won't execute very often unless on very fast + * machines because the time window for this to happen is very small. + */ + for (;;) { + /* GET_DISTANCE_TO_VBLANKSTART returns distance to real vblank + * start in hpos, and to the "fudged earlier" vblank start in + * vpos. + */ + stat = radeon_get_crtc_scanoutpos(rdev->ddev, work->crtc_id, + GET_DISTANCE_TO_VBLANKSTART, + &vpos, &hpos, NULL, NULL, + &crtc->hwmode); + + if ((stat & (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE)) != + (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE) || + !(vpos >= 0 && hpos <= 0)) + break; + + /* Sleep at least until estimated real start of hw vblank */ + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); + min_udelay = (-hpos + 1) * max(vblank->linedur_ns / 1000, 5); + usleep_range(min_udelay, 2 * min_udelay); + spin_lock_irqsave(&crtc->dev->event_lock, flags); + }; + /* do the flip (mmio) */ radeon_page_flip(rdev, radeon_crtc->crtc_id, work->base); @@ -1768,6 +1807,15 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, * \param dev Device to query. * \param crtc Crtc to query. * \param flags Flags from caller (DRM_CALLED_FROM_VBLIRQ or 0). + * For driver internal use only also supports these flags: + * + * USE_REAL_VBLANKSTART to use the real start of vblank instead + * of a fudged earlier start of vblank. + * + * GET_DISTANCE_TO_VBLANKSTART to return distance to the + * fudged earlier start of vblank in *vpos and the distance + * to true start of vblank in *hpos. + * * \param *vpos Location where vertical scanout position should be stored. * \param *hpos Location where horizontal scanout position should go. * \param *stime Target location for timestamp taken immediately before @@ -1911,10 +1959,40 @@ int radeon_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe, vbl_end = 0; } + /* Called from driver internal vblank counter query code? */ + if (flags & GET_DISTANCE_TO_VBLANKSTART) { + /* Caller wants distance from real vbl_start in *hpos */ + *hpos = *vpos - vbl_start; + } + + /* Fudge vblank to start a few scanlines earlier to handle the + * problem that vblank irqs fire a few scanlines before start + * of vblank. Some driver internal callers need the true vblank + * start to be used and signal this via the USE_REAL_VBLANKSTART flag. + * + * The cause of the "early" vblank irq is that the irq is triggered + * by the line buffer logic when the line buffer read position enters + * the vblank, whereas our crtc scanout position naturally lags the + * line buffer read position. + */ + if (!(flags & USE_REAL_VBLANKSTART)) + vbl_start -= rdev->mode_info.crtcs[pipe]->lb_vblank_lead_lines; + /* Test scanout position against vblank region. */ if ((*vpos < vbl_start) && (*vpos >= vbl_end)) in_vbl = false; + /* In vblank? */ + if (in_vbl) + ret |= DRM_SCANOUTPOS_IN_VBLANK; + + /* Called from driver internal vblank counter query code? */ + if (flags & GET_DISTANCE_TO_VBLANKSTART) { + /* Caller wants distance from fudged earlier vbl_start */ + *vpos -= vbl_start; + return ret; + } + /* Check if inside vblank area and apply corrective offsets: * vpos will then be >=0 in video scanout area, but negative * within vblank area, counting down the number of lines until @@ -1930,31 +2008,5 @@ int radeon_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe, /* Correct for shifted end of vbl at vbl_end. */ *vpos = *vpos - vbl_end; - /* In vblank? */ - if (in_vbl) - ret |= DRM_SCANOUTPOS_IN_VBLANK; - - /* Is vpos outside nominal vblank area, but less than - * 1/100 of a frame height away from start of vblank? - * If so, assume this isn't a massively delayed vblank - * interrupt, but a vblank interrupt that fired a few - * microseconds before true start of vblank. Compensate - * by adding a full frame duration to the final timestamp. - * Happens, e.g., on ATI R500, R600. - * - * We only do this if DRM_CALLED_FROM_VBLIRQ. - */ - if ((flags & DRM_CALLED_FROM_VBLIRQ) && !in_vbl) { - vbl_start = mode->crtc_vdisplay; - vtotal = mode->crtc_vtotal; - - if (vbl_start - *vpos < vtotal / 100) { - *vpos -= vtotal; - - /* Signal this correction as "applied". */ - ret |= 0x8; - } - } - return ret; } diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 0ec6fcca16d3..d290a8a09036 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -755,6 +755,8 @@ void radeon_driver_preclose_kms(struct drm_device *dev, */ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc) { + int vpos, hpos, stat; + u32 count; struct radeon_device *rdev = dev->dev_private; if (crtc < 0 || crtc >= rdev->num_crtc) { @@ -762,7 +764,53 @@ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc) return -EINVAL; } - return radeon_get_vblank_counter(rdev, crtc); + /* The hw increments its frame counter at start of vsync, not at start + * of vblank, as is required by DRM core vblank counter handling. + * Cook the hw count here to make it appear to the caller as if it + * incremented at start of vblank. We measure distance to start of + * vblank in vpos. vpos therefore will be >= 0 between start of vblank + * and start of vsync, so vpos >= 0 means to bump the hw frame counter + * result by 1 to give the proper appearance to caller. + */ + if (rdev->mode_info.crtcs[crtc]) { + /* Repeat readout if needed to provide stable result if + * we cross start of vsync during the queries. + */ + do { + count = radeon_get_vblank_counter(rdev, crtc); + /* Ask radeon_get_crtc_scanoutpos to return vpos as + * distance to start of vblank, instead of regular + * vertical scanout pos. + */ + stat = radeon_get_crtc_scanoutpos( + dev, crtc, GET_DISTANCE_TO_VBLANKSTART, + &vpos, &hpos, NULL, NULL, + &rdev->mode_info.crtcs[crtc]->base.hwmode); + } while (count != radeon_get_vblank_counter(rdev, crtc)); + + if (((stat & (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE)) != + (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE))) { + DRM_DEBUG_VBL("Query failed! stat %d\n", stat); + } + else { + DRM_DEBUG_VBL("crtc %d: dist from vblank start %d\n", + crtc, vpos); + + /* Bump counter if we are at >= leading edge of vblank, + * but before vsync where vpos would turn negative and + * the hw counter really increments. + */ + if (vpos >= 0) + count++; + } + } + else { + /* Fallback to use value as is. */ + count = radeon_get_vblank_counter(rdev, crtc); + DRM_DEBUG_VBL("NULL mode info! Returned count may be wrong.\n"); + } + + return count; } /** diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 0fa3e255a545..bba112628b47 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -367,6 +367,7 @@ struct radeon_crtc { u32 line_time; u32 wm_low; u32 wm_high; + u32 lb_vblank_lead_lines; struct drm_display_mode hw_mode; enum radeon_output_csc output_csc; }; @@ -687,6 +688,9 @@ struct atom_voltage_table struct atom_voltage_table_entry entries[MAX_VOLTAGE_ENTRIES]; }; +/* Driver internal use only flags of radeon_get_crtc_scanoutpos() */ +#define USE_REAL_VBLANKSTART (1 << 30) +#define GET_DISTANCE_TO_VBLANKSTART (1 << 31) extern void radeon_add_atom_connector(struct drm_device *dev, diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index f4f03dcc1530..59abebd6b5dc 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -1756,7 +1756,9 @@ static bool radeon_pm_in_vbl(struct radeon_device *rdev) */ for (crtc = 0; (crtc < rdev->num_crtc) && in_vbl; crtc++) { if (rdev->pm.active_crtcs & (1 << crtc)) { - vbl_status = radeon_get_crtc_scanoutpos(rdev->ddev, crtc, 0, + vbl_status = radeon_get_crtc_scanoutpos(rdev->ddev, + crtc, + USE_REAL_VBLANKSTART, &vpos, &hpos, NULL, NULL, &rdev->mode_info.crtcs[crtc]->base.hwmode); if ((vbl_status & DRM_SCANOUTPOS_VALID) && diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 516ca27cfa12..6bc44c24e837 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -207,6 +207,9 @@ void rs690_line_buffer_adjust(struct radeon_device *rdev, { u32 tmp; + /* Guess line buffer size to be 8192 pixels */ + u32 lb_size = 8192; + /* * Line Buffer Setup * There is a single line buffer shared by both display controllers. @@ -243,6 +246,13 @@ void rs690_line_buffer_adjust(struct radeon_device *rdev, tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q; } WREG32(R_006520_DC_LB_MEMORY_SPLIT, tmp); + + /* Save number of lines the linebuffer leads before the scanout */ + if (mode1) + rdev->mode_info.crtcs[0]->lb_vblank_lead_lines = DIV_ROUND_UP(lb_size, mode1->crtc_hdisplay); + + if (mode2) + rdev->mode_info.crtcs[1]->lb_vblank_lead_lines = DIV_ROUND_UP(lb_size, mode2->crtc_hdisplay); } struct rs690_watermark { diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index fb1a7ec1a81c..f878d6962da5 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2376,6 +2376,9 @@ static void dce6_program_watermarks(struct radeon_device *rdev, c.full = dfixed_div(c, a); priority_b_mark = dfixed_trunc(c); priority_b_cnt |= priority_b_mark & PRIORITY_MARK_MASK; + + /* Save number of lines the linebuffer leads before the scanout */ + radeon_crtc->lb_vblank_lead_lines = DIV_ROUND_UP(lb_size, mode->crtc_hdisplay); } /* select wm A */ |