qlcnic: NIC Partitioning - Add basic infrastructure support

Following changes have been added to enable the adapter to work in
NIC partitioning mode where multiple PCI functions of an adapter port can
be configured to work as NIC functions. The first function that is enumerated on
the PCI bus assumes the role of management function which, besides being able
to do all the NIC functionality, can configure other NIC partitions. Other NIC
functions can be configured as privileged or non privileged functions.
Privileged function can not configure other NIC functions but can do all the
NIC functionality including any firmware initialization, chip reset etc. Non
privileged functions can do only basic IO. For chip reset etc, it depends on the
privilege or management function.

1. Added code to determine PCI function number independent of kernel API.
2. Added Driver - FW version 2.0 support.
3. Changed producer and consumer register offset calculation.
4. Added management and privileged operation modes for npar functions. A module
 parameter has been added to control it.
5. Added support for configuring the eswitch in the adapter.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 494 insertions, 19 deletions

diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c
index c2c1f5cc16c6..1e1dc58cddca 100644
--- a/drivers/net/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/qlcnic/qlcnic_ctx.c
@@ -88,12 +88,12 @@ qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu)
 
 	if (recv_ctx->state == QLCNIC_HOST_CTX_STATE_ACTIVE) {
 		if (qlcnic_issue_cmd(adapter,
-				adapter->ahw.pci_func,
-				QLCHAL_VERSION,
-				recv_ctx->context_id,
-				mtu,
-				0,
-				QLCNIC_CDRP_CMD_SET_MTU)) {
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			recv_ctx->context_id,
+			mtu,
+			0,
+			QLCNIC_CDRP_CMD_SET_MTU)) {
 
 			dev_err(&adapter->pdev->dev, "Failed to set mtu\n");
 			return -EIO;
@@ -121,7 +121,7 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 
 	int i, nrds_rings, nsds_rings;
 	size_t rq_size, rsp_size;
-	u32 cap, reg, val;
+	u32 cap, reg, val, reg2;
 	int err;
 
 	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
@@ -197,7 +197,7 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 	phys_addr = hostrq_phys_addr;
 	err = qlcnic_issue_cmd(adapter,
 			adapter->ahw.pci_func,
-			QLCHAL_VERSION,
+			adapter->fw_hal_version,
 			(u32)(phys_addr >> 32),
 			(u32)(phys_addr & 0xffffffff),
 			rq_size,
@@ -216,8 +216,12 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 		rds_ring = &recv_ctx->rds_rings[i];
 
 		reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
-		rds_ring->crb_rcv_producer = qlcnic_get_ioaddr(adapter,
+		if (adapter->fw_hal_version == QLCNIC_FW_BASE)
+			rds_ring->crb_rcv_producer = qlcnic_get_ioaddr(adapter,
 				QLCNIC_REG(reg - 0x200));
+		else
+			rds_ring->crb_rcv_producer = adapter->ahw.pci_base0 +
+				reg;
 	}
 
 	prsp_sds = ((struct qlcnic_cardrsp_sds_ring *)
@@ -227,12 +231,18 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 		sds_ring = &recv_ctx->sds_rings[i];
 
 		reg = le32_to_cpu(prsp_sds[i].host_consumer_crb);
-		sds_ring->crb_sts_consumer = qlcnic_get_ioaddr(adapter,
-				QLCNIC_REG(reg - 0x200));
+		reg2 = le32_to_cpu(prsp_sds[i].interrupt_crb);
 
-		reg = le32_to_cpu(prsp_sds[i].interrupt_crb);
-		sds_ring->crb_intr_mask = qlcnic_get_ioaddr(adapter,
+		if (adapter->fw_hal_version == QLCNIC_FW_BASE) {
+			sds_ring->crb_sts_consumer = qlcnic_get_ioaddr(adapter,
 				QLCNIC_REG(reg - 0x200));
+			sds_ring->crb_intr_mask = qlcnic_get_ioaddr(adapter,
+				QLCNIC_REG(reg2 - 0x200));
+		} else {
+			sds_ring->crb_sts_consumer = adapter->ahw.pci_base0 +
+				reg;
+			sds_ring->crb_intr_mask = adapter->ahw.pci_base0 + reg2;
+		}
 	}
 
 	recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
@@ -253,7 +263,7 @@ qlcnic_fw_cmd_destroy_rx_ctx(struct qlcnic_adapter *adapter)
 
 	if (qlcnic_issue_cmd(adapter,
 			adapter->ahw.pci_func,
-			QLCHAL_VERSION,
+			adapter->fw_hal_version,
 			recv_ctx->context_id,
 			QLCNIC_DESTROY_CTX_RESET,
 			0,
@@ -319,7 +329,7 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter)
 	phys_addr = rq_phys_addr;
 	err = qlcnic_issue_cmd(adapter,
 			adapter->ahw.pci_func,
-			QLCHAL_VERSION,
+			adapter->fw_hal_version,
 			(u32)(phys_addr >> 32),
 			((u32)phys_addr & 0xffffffff),
 			rq_size,
@@ -327,8 +337,12 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter)
 
 	if (err == QLCNIC_RCODE_SUCCESS) {
 		temp = le32_to_cpu(prsp->cds_ring.host_producer_crb);
-		tx_ring->crb_cmd_producer = qlcnic_get_ioaddr(adapter,
+		if (adapter->fw_hal_version == QLCNIC_FW_BASE)
+			tx_ring->crb_cmd_producer = qlcnic_get_ioaddr(adapter,
 				QLCNIC_REG(temp - 0x200));
+		else
+			tx_ring->crb_cmd_producer = adapter->ahw.pci_base0 +
+				temp;
 
 		adapter->tx_context_id =
 			le16_to_cpu(prsp->context_id);
@@ -351,7 +365,7 @@ qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter)
 {
 	if (qlcnic_issue_cmd(adapter,
 			adapter->ahw.pci_func,
-			QLCHAL_VERSION,
+			adapter->fw_hal_version,
 			adapter->tx_context_id,
 			QLCNIC_DESTROY_CTX_RESET,
 			0,
@@ -368,7 +382,7 @@ qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val)
 
 	if (qlcnic_issue_cmd(adapter,
 			adapter->ahw.pci_func,
-			QLCHAL_VERSION,
+			adapter->fw_hal_version,
 			reg,
 			0,
 			0,
@@ -385,7 +399,7 @@ qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val)
 {
 	return qlcnic_issue_cmd(adapter,
 			adapter->ahw.pci_func,
-			QLCHAL_VERSION,
+			adapter->fw_hal_version,
 			reg,
 			val,
 			0,
@@ -533,3 +547,464 @@ void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter)
 	}
 }
 
+/* Set MAC address of a NIC partition */
+int qlcnic_set_mac_address(struct qlcnic_adapter *adapter, u8* mac)
+{
+	int err = 0;
+	u32 arg1, arg2, arg3;
+
+	arg1 = adapter->ahw.pci_func | BIT_9;
+	arg2 = mac[0] | (mac[1] << 8) | (mac[2] << 16) | (mac[3] << 24);
+	arg3 = mac[4] | (mac[5] << 16);
+
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			arg1,
+			arg2,
+			arg3,
+			QLCNIC_CDRP_CMD_MAC_ADDRESS);
+
+	if (err != QLCNIC_RCODE_SUCCESS) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to set mac address%d\n", err);
+		err = -EIO;
+	}
+
+	return err;
+}
+
+/* Get MAC address of a NIC partition */
+int qlcnic_get_mac_address(struct qlcnic_adapter *adapter, u8 *mac)
+{
+	int err;
+	u32 arg1;
+
+	arg1 = adapter->ahw.pci_func | BIT_8;
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			arg1,
+			0,
+			0,
+			QLCNIC_CDRP_CMD_MAC_ADDRESS);
+
+	if (err == QLCNIC_RCODE_SUCCESS) {
+		qlcnic_fetch_mac(adapter, QLCNIC_ARG1_CRB_OFFSET,
+				QLCNIC_ARG2_CRB_OFFSET, 0, mac);
+		dev_info(&adapter->pdev->dev, "MAC address: %pM\n", mac);
+	} else {
+		dev_err(&adapter->pdev->dev,
+			"Failed to get mac address%d\n", err);
+		err = -EIO;
+	}
+
+	return err;
+}
+
+/* Get info of a NIC partition */
+int qlcnic_get_nic_info(struct qlcnic_adapter *adapter, u8 func_id)
+{
+	int	err;
+	dma_addr_t nic_dma_t;
+	struct qlcnic_info *nic_info;
+	void *nic_info_addr;
+	size_t	nic_size = sizeof(struct qlcnic_info);
+
+	nic_info_addr = pci_alloc_consistent(adapter->pdev,
+		nic_size, &nic_dma_t);
+	if (!nic_info_addr)
+		return -ENOMEM;
+	memset(nic_info_addr, 0, nic_size);
+
+	nic_info = (struct qlcnic_info *) nic_info_addr;
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			MSD(nic_dma_t),
+			LSD(nic_dma_t),
+			(func_id << 16 | nic_size),
+			QLCNIC_CDRP_CMD_GET_NIC_INFO);
+
+	if (err == QLCNIC_RCODE_SUCCESS) {
+		adapter->physical_port = le16_to_cpu(nic_info->phys_port);
+		adapter->switch_mode = le16_to_cpu(nic_info->switch_mode);
+		adapter->max_tx_ques = le16_to_cpu(nic_info->max_tx_ques);
+		adapter->max_rx_ques = le16_to_cpu(nic_info->max_rx_ques);
+		adapter->min_tx_bw = le16_to_cpu(nic_info->min_tx_bw);
+		adapter->max_tx_bw = le16_to_cpu(nic_info->max_tx_bw);
+		adapter->max_mtu = le16_to_cpu(nic_info->max_mtu);
+		adapter->capabilities = le32_to_cpu(nic_info->capabilities);
+		adapter->max_mac_filters = nic_info->max_mac_filters;
+
+		dev_info(&adapter->pdev->dev,
+			"phy port: %d switch_mode: %d,\n"
+			"\tmax_tx_q: %d max_rx_q: %d min_tx_bw: 0x%x,\n"
+			"\tmax_tx_bw: 0x%x max_mtu:0x%x, capabilities: 0x%x\n",
+			adapter->physical_port, adapter->switch_mode,
+			adapter->max_tx_ques, adapter->max_rx_ques,
+			adapter->min_tx_bw, adapter->max_tx_bw,
+			adapter->max_mtu, adapter->capabilities);
+	} else {
+		dev_err(&adapter->pdev->dev,
+			"Failed to get nic info%d\n", err);
+		err = -EIO;
+	}
+
+	pci_free_consistent(adapter->pdev, nic_size, nic_info_addr, nic_dma_t);
+	return err;
+}
+
+/* Configure a NIC partition */
+int qlcnic_set_nic_info(struct qlcnic_adapter *adapter, struct qlcnic_info *nic)
+{
+	int err = -EIO;
+	u32 func_state;
+	dma_addr_t nic_dma_t;
+	void *nic_info_addr;
+	struct qlcnic_info *nic_info;
+	size_t nic_size = sizeof(struct qlcnic_info);
+
+	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
+		return err;
+
+	if (qlcnic_api_lock(adapter))
+		return err;
+
+	func_state = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
+	if (QLC_DEV_CHECK_ACTIVE(func_state, nic->pci_func)) {
+		qlcnic_api_unlock(adapter);
+		return err;
+	}
+
+	qlcnic_api_unlock(adapter);
+
+	nic_info_addr = pci_alloc_consistent(adapter->pdev, nic_size,
+			&nic_dma_t);
+	if (!nic_info_addr)
+		return -ENOMEM;
+
+	memset(nic_info_addr, 0, nic_size);
+	nic_info = (struct qlcnic_info *)nic_info_addr;
+
+	nic_info->pci_func = cpu_to_le16(nic->pci_func);
+	nic_info->op_mode = cpu_to_le16(nic->op_mode);
+	nic_info->phys_port = cpu_to_le16(nic->phys_port);
+	nic_info->switch_mode = cpu_to_le16(nic->switch_mode);
+	nic_info->capabilities = cpu_to_le32(nic->capabilities);
+	nic_info->max_mac_filters = nic->max_mac_filters;
+	nic_info->max_tx_ques = cpu_to_le16(nic->max_tx_ques);
+	nic_info->max_rx_ques = cpu_to_le16(nic->max_rx_ques);
+	nic_info->min_tx_bw = cpu_to_le16(nic->min_tx_bw);
+	nic_info->max_tx_bw = cpu_to_le16(nic->max_tx_bw);
+
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			MSD(nic_dma_t),
+			LSD(nic_dma_t),
+			nic_size,
+			QLCNIC_CDRP_CMD_SET_NIC_INFO);
+
+	if (err != QLCNIC_RCODE_SUCCESS) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to set nic info%d\n", err);
+		err = -EIO;
+	}
+
+	pci_free_consistent(adapter->pdev, nic_size, nic_info_addr, nic_dma_t);
+	return err;
+}
+
+/* Get PCI Info of a partition */
+int qlcnic_get_pci_info(struct qlcnic_adapter *adapter)
+{
+	int err = 0, i;
+	dma_addr_t pci_info_dma_t;
+	struct qlcnic_pci_info *npar;
+	void *pci_info_addr;
+	size_t npar_size = sizeof(struct qlcnic_pci_info);
+	size_t pci_size = npar_size * QLCNIC_MAX_PCI_FUNC;
+
+	pci_info_addr = pci_alloc_consistent(adapter->pdev, pci_size,
+			&pci_info_dma_t);
+	if (!pci_info_addr)
+		return -ENOMEM;
+	memset(pci_info_addr, 0, pci_size);
+
+	if (!adapter->npars)
+		adapter->npars = kzalloc(pci_size, GFP_KERNEL);
+	if (!adapter->npars) {
+		err = -ENOMEM;
+		goto err_npar;
+	}
+
+	if (!adapter->eswitch)
+		adapter->eswitch = kzalloc(sizeof(struct qlcnic_eswitch) *
+				QLCNIC_NIU_MAX_XG_PORTS, GFP_KERNEL);
+	if (!adapter->eswitch) {
+		err = -ENOMEM;
+		goto err_eswitch;
+	}
+
+	npar = (struct qlcnic_pci_info *) pci_info_addr;
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			MSD(pci_info_dma_t),
+			LSD(pci_info_dma_t),
+			pci_size,
+			QLCNIC_CDRP_CMD_GET_PCI_INFO);
+
+	if (err == QLCNIC_RCODE_SUCCESS) {
+		for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++, npar++) {
+			adapter->npars[i].id = le32_to_cpu(npar->id);
+			adapter->npars[i].active = le32_to_cpu(npar->active);
+			adapter->npars[i].type = le32_to_cpu(npar->type);
+			adapter->npars[i].default_port =
+				le32_to_cpu(npar->default_port);
+			adapter->npars[i].tx_min_bw =
+				le32_to_cpu(npar->tx_min_bw);
+			adapter->npars[i].tx_max_bw =
+				le32_to_cpu(npar->tx_max_bw);
+			memcpy(adapter->npars[i].mac, npar->mac, ETH_ALEN);
+		}
+	} else {
+		dev_err(&adapter->pdev->dev,
+			"Failed to get PCI Info%d\n", err);
+		kfree(adapter->npars);
+		err = -EIO;
+	}
+	goto err_npar;
+
+err_eswitch:
+	kfree(adapter->npars);
+	adapter->npars = NULL;
+
+err_npar:
+	pci_free_consistent(adapter->pdev, pci_size, pci_info_addr,
+		pci_info_dma_t);
+	return err;
+}
+
+/* Reset a NIC partition */
+
+int qlcnic_reset_partition(struct qlcnic_adapter *adapter, u8 func_no)
+{
+	int err = -EIO;
+
+	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
+		return err;
+
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			func_no,
+			0,
+			0,
+			QLCNIC_CDRP_CMD_RESET_NPAR);
+
+	if (err != QLCNIC_RCODE_SUCCESS) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to issue reset partition%d\n", err);
+		err = -EIO;
+	}
+
+	return err;
+}
+
+/* Get eSwitch Capabilities */
+int qlcnic_get_eswitch_capabilities(struct qlcnic_adapter *adapter, u8 port,
+					struct qlcnic_eswitch *eswitch)
+{
+	int err = -EIO;
+	u32 arg1, arg2;
+
+	if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC)
+		return err;
+
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			port,
+			0,
+			0,
+			QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY);
+
+	if (err == QLCNIC_RCODE_SUCCESS) {
+		arg1 = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
+		arg2 = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);
+
+		eswitch->port = arg1 & 0xf;
+		eswitch->active_vports = LSB(arg2);
+		eswitch->max_ucast_filters = MSB(arg2);
+		eswitch->max_active_vlans = LSB(MSW(arg2));
+		if (arg1 & BIT_6)
+			eswitch->flags |= QLCNIC_SWITCH_VLAN_FILTERING;
+		if (arg1 & BIT_7)
+			eswitch->flags |= QLCNIC_SWITCH_PROMISC_MODE;
+		if (arg1 & BIT_8)
+			eswitch->flags |= QLCNIC_SWITCH_PORT_MIRRORING;
+	} else {
+		dev_err(&adapter->pdev->dev,
+			"Failed to get eswitch capabilities%d\n", err);
+	}
+
+	return err;
+}
+
+/* Get current status of eswitch */
+int qlcnic_get_eswitch_status(struct qlcnic_adapter *adapter, u8 port,
+				struct qlcnic_eswitch *eswitch)
+{
+	int err = -EIO;
+	u32 arg1, arg2;
+
+	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
+		return err;
+
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			port,
+			0,
+			0,
+			QLCNIC_CDRP_CMD_GET_ESWITCH_STATUS);
+
+	if (err == QLCNIC_RCODE_SUCCESS) {
+		arg1 = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
+		arg2 = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);
+
+		eswitch->port = arg1 & 0xf;
+		eswitch->active_vports = LSB(arg2);
+		eswitch->active_ucast_filters = MSB(arg2);
+		eswitch->active_vlans = LSB(MSW(arg2));
+		if (arg1 & BIT_6)
+			eswitch->flags |= QLCNIC_SWITCH_VLAN_FILTERING;
+		if (arg1 & BIT_8)
+			eswitch->flags |= QLCNIC_SWITCH_PORT_MIRRORING;
+
+	} else {
+		dev_err(&adapter->pdev->dev,
+			"Failed to get eswitch status%d\n", err);
+	}
+
+	return err;
+}
+
+/* Enable/Disable eSwitch */
+int qlcnic_toggle_eswitch(struct qlcnic_adapter *adapter, u8 id, u8 enable)
+{
+	int err = -EIO;
+	u32 arg1, arg2;
+	struct qlcnic_eswitch *eswitch;
+
+	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
+		return err;
+
+	eswitch = &adapter->eswitch[id];
+	if (!eswitch)
+		return err;
+
+	arg1 = eswitch->port | (enable ? BIT_4 : 0);
+	arg2 = eswitch->active_vports | (eswitch->max_ucast_filters << 8) |
+		(eswitch->max_active_vlans << 16);
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			arg1,
+			arg2,
+			0,
+			QLCNIC_CDRP_CMD_TOGGLE_ESWITCH);
+
+	if (err != QLCNIC_RCODE_SUCCESS) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to enable eswitch%d\n", eswitch->port);
+		eswitch->flags &= ~QLCNIC_SWITCH_ENABLE;
+		err = -EIO;
+	} else {
+		eswitch->flags |= QLCNIC_SWITCH_ENABLE;
+		dev_info(&adapter->pdev->dev,
+			"Enabled eSwitch for port %d\n", eswitch->port);
+	}
+
+	return err;
+}
+
+/* Configure eSwitch for port mirroring */
+int qlcnic_config_port_mirroring(struct qlcnic_adapter *adapter, u8 id,
+				u8 enable_mirroring, u8 pci_func)
+{
+	int err = -EIO;
+	u32 arg1;
+
+	if (adapter->op_mode != QLCNIC_MGMT_FUNC ||
+		!(adapter->eswitch[id].flags & QLCNIC_SWITCH_ENABLE))
+		return err;
+
+	arg1 = id | (enable_mirroring ? BIT_4 : 0);
+	arg1 |= pci_func << 8;
+
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			arg1,
+			0,
+			0,
+			QLCNIC_CDRP_CMD_SET_PORTMIRRORING);
+
+	if (err != QLCNIC_RCODE_SUCCESS) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to configure port mirroring%d on eswitch:%d\n",
+			pci_func, id);
+	} else {
+		dev_info(&adapter->pdev->dev,
+			"Configured eSwitch %d for port mirroring:%d\n",
+			id, pci_func);
+	}
+
+	return err;
+}
+
+/* Configure eSwitch port */
+int qlcnic_config_switch_port(struct qlcnic_adapter *adapter, u8 id,
+		int vlan_tagging, u8 discard_tagged, u8 promsc_mode,
+		u8 mac_learn, u8 pci_func, u16 vlan_id)
+{
+	int err = -EIO;
+	u32 arg1;
+	struct qlcnic_eswitch *eswitch;
+
+	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
+		return err;
+
+	eswitch = &adapter->eswitch[id];
+	if (!(eswitch->flags & QLCNIC_SWITCH_ENABLE))
+		return err;
+
+	arg1 = eswitch->port | (discard_tagged ? BIT_4 : 0);
+	arg1 |= (promsc_mode ? BIT_6 : 0) | (mac_learn ? BIT_7 : 0);
+	arg1 |= pci_func << 8;
+	if (vlan_tagging)
+		arg1 |= BIT_5 | (vlan_id << 16);
+
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			adapter->fw_hal_version,
+			arg1,
+			0,
+			0,
+			QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH);
+
+	if (err != QLCNIC_RCODE_SUCCESS) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to configure eswitch port%d\n", eswitch->port);
+		eswitch->flags |= QLCNIC_SWITCH_ENABLE;
+	} else {
+		eswitch->flags &= ~QLCNIC_SWITCH_ENABLE;
+		dev_info(&adapter->pdev->dev,
+			"Configured eSwitch for port %d\n", eswitch->port);
+	}
+
+	return err;
+}