Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...

2 files changed, 253 insertions, 0 deletions

diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
new file mode 100644
index 000000000000..7cced1fea9c3
--- /dev/null
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -0,0 +1,86 @@
+		Samsung ARM Linux Overview
+		==========================
+
+Introduction
+------------
+
+  The Samsung range of ARM SoCs spans many similar devices, from the initial
+  ARM9 through to the newest ARM cores. This document shows an overview of
+  the current kernel support, how to use it and where to find the code
+  that supports this.
+
+  The currently supported SoCs are:
+
+  - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+  - S3C64XX: S3C6400 and S3C6410
+  - S5PC6440
+
+  S5PC100 and S5PC110 support is currently being merged
+
+
+S3C24XX Systems
+---------------
+
+  There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
+  deals with the architecture and drivers specific to these devices.
+
+  See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+  on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+  A number of configurations are supplied, as there is no current way of
+  unifying all the SoCs into one kernel.
+
+  s5p6440_defconfig - S5P6440 specific default configuration
+  s5pc100_defconfig - S5PC100 specific default configuration
+
+
+Layout
+------
+
+  The directory layout is currently being restructured, and consists of
+  several platform directories and then the machine specific directories
+  of the CPUs being built for.
+
+  plat-samsung provides the base for all the implementations, and is the
+  last in the line of include directories that are processed for the build
+  specific information. It contains the base clock, GPIO and device definitions
+  to get the system running.
+
+  plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
+  involved in other builds this will be phased out once the relevant code is
+  moved elsewhere.
+
+  plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
+
+  plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
+
+  plat-s5p is for s5p specific builds, more to be added.
+
+
+  [ to finish ]
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>
diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk
new file mode 100755
index 000000000000..0c50220851fb
--- /dev/null
+++ b/Documentation/arm/Samsung/clksrc-change-registers.awk
@@ -0,0 +1,167 @@
+#!/usr/bin/awk -f
+#
+# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+#
+# Released under GPLv2
+
+# example usage
+# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
+
+function extract_value(s)
+{
+    eqat = index(s, "=")
+    comat = index(s, ",")
+    return substr(s, eqat+2, (comat-eqat)-2)
+}
+
+function remove_brackets(b)
+{
+    return substr(b, 2, length(b)-2)
+}
+
+function splitdefine(l, p)
+{
+    r = split(l, tp)
+
+    p[0] = tp[2]
+    p[1] = remove_brackets(tp[3])
+}
+
+function find_length(f)
+{
+    if (0)
+	printf "find_length " f "\n" > "/dev/stderr"
+
+    if (f ~ /0x1/)
+	return 1
+    else if (f ~ /0x3/)
+	return 2
+    else if (f ~ /0x7/)
+	return 3
+    else if (f ~ /0xf/)
+	return 4
+
+    printf "unknown legnth " f "\n" > "/dev/stderr"
+    exit
+}
+
+function find_shift(s)
+{
+    id = index(s, "<")
+    if (id <= 0) {
+	printf "cannot find shift " s "\n" > "/dev/stderr"
+	exit
+    }
+
+    return substr(s, id+2)
+}
+
+
+BEGIN {
+    if (ARGC < 2) {
+	print "too few arguments" > "/dev/stderr"
+	exit
+    }
+
+# read the header file and find the mask values that we will need
+# to replace and create an associative array of values
+
+    while (getline line < ARGV[1] > 0) {
+	if (line ~ /\#define.*_MASK/ &&
+	    !(line ~ /S5PC100_EPLL_MASK/) &&
+	    !(line ~ /USB_SIG_MASK/)) {
+	    splitdefine(line, fields)
+	    name = fields[0]
+	    if (0)
+		printf "MASK " line "\n" > "/dev/stderr"
+	    dmask[name,0] = find_length(fields[1])
+	    dmask[name,1] = find_shift(fields[1])
+	    if (0)
+		printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
+	} else {
+	}
+    }
+
+    delete ARGV[1]
+}
+
+/clksrc_clk.*=.*{/ {
+    shift=""
+    mask=""
+    divshift=""
+    reg_div=""
+    reg_src=""
+    indent=1
+
+    print $0
+
+    for(; indent >= 1;) {
+	if ((getline line) <= 0) {
+	    printf "unexpected end of file" > "/dev/stderr"
+	    exit 1;
+	}
+
+	if (line ~ /\.shift/) {
+	    shift = extract_value(line)
+	} else if (line ~ /\.mask/) {
+	    mask = extract_value(line)
+	} else if (line ~ /\.reg_divider/) {
+	    reg_div = extract_value(line)
+	} else if (line ~ /\.reg_source/) {
+	    reg_src = extract_value(line)
+	} else if (line ~ /\.divider_shift/) {
+	    divshift = extract_value(line)
+	} else if (line ~ /{/) {
+		indent++
+		print line
+	    } else if (line ~ /}/) {
+	    indent--
+
+	    if (indent == 0) {
+		if (0) {
+		    printf "shift '" shift   "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
+		    printf "mask  '" mask    "'\n" > "/dev/stderr"
+		    printf "dshft '" divshift "'\n" > "/dev/stderr"
+		    printf "rdiv  '" reg_div "'\n" > "/dev/stderr"
+		    printf "rsrc  '" reg_src "'\n" > "/dev/stderr"
+		}
+
+		generated = mask
+		sub(reg_src, reg_div, generated)
+
+		if (0) {
+		    printf "/* rsrc " reg_src " */\n"
+		    printf "/* rdiv " reg_div " */\n"
+		    printf "/* shift " shift " */\n"
+		    printf "/* mask " mask " */\n"
+		    printf "/* generated " generated " */\n"
+		}
+
+		if (reg_div != "") {
+		    printf "\t.reg_div = { "
+		    printf ".reg = " reg_div ", "
+		    printf ".shift = " dmask[generated,1] ", "
+		    printf ".size = " dmask[generated,0] ", "
+		    printf "},\n"
+		}
+
+		printf "\t.reg_src = { "
+		printf ".reg = " reg_src ", "
+		printf ".shift = " dmask[mask,1] ", "
+		printf ".size = " dmask[mask,0] ", "
+
+		printf "},\n"
+
+	    }
+
+	    print line
+	} else {
+	    print line
+	}
+
+	if (0)
+	    printf indent ":" line "\n" > "/dev/stderr"
+    }
+}
+
+// && ! /clksrc_clk.*=.*{/ { print $0 }