diff options
Diffstat (limited to 'drivers/usb/core')
| -rw-r--r-- | drivers/usb/core/hcd.c | 44 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 70 |
2 files changed, 96 insertions, 18 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 4225d5e72131..8e64adf8e4d5 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -39,6 +39,7 @@ #include <asm/unaligned.h> #include <linux/platform_device.h> #include <linux/workqueue.h> +#include <linux/pm_runtime.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -1025,6 +1026,49 @@ static int register_root_hub(struct usb_hcd *hcd) return retval; } +/* + * usb_hcd_start_port_resume - a root-hub port is sending a resume signal + * @bus: the bus which the root hub belongs to + * @portnum: the port which is being resumed + * + * HCDs should call this function when they know that a resume signal is + * being sent to a root-hub port. The root hub will be prevented from + * going into autosuspend until usb_hcd_end_port_resume() is called. + * + * The bus's private lock must be held by the caller. + */ +void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum) +{ + unsigned bit = 1 << portnum; + + if (!(bus->resuming_ports & bit)) { + bus->resuming_ports |= bit; + pm_runtime_get_noresume(&bus->root_hub->dev); + } +} +EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume); + +/* + * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal + * @bus: the bus which the root hub belongs to + * @portnum: the port which is being resumed + * + * HCDs should call this function when they know that a resume signal has + * stopped being sent to a root-hub port. The root hub will be allowed to + * autosuspend again. + * + * The bus's private lock must be held by the caller. + */ +void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum) +{ + unsigned bit = 1 << portnum; + + if (bus->resuming_ports & bit) { + bus->resuming_ports &= ~bit; + pm_runtime_put_noidle(&bus->root_hub->dev); + } +} +EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume); /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 957ed2c41482..cbf7168e3ce7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2838,6 +2838,23 @@ void usb_enable_ltm(struct usb_device *udev) EXPORT_SYMBOL_GPL(usb_enable_ltm); #ifdef CONFIG_USB_SUSPEND +/* + * usb_disable_function_remotewakeup - disable usb3.0 + * device's function remote wakeup + * @udev: target device + * + * Assume there's only one function on the USB 3.0 + * device and disable remote wake for the first + * interface. FIXME if the interface association + * descriptor shows there's more than one function. + */ +static int usb_disable_function_remotewakeup(struct usb_device *udev) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE, + USB_INTRF_FUNC_SUSPEND, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); +} /* * usb_port_suspend - suspend a usb device's upstream port @@ -2955,12 +2972,19 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n", port1, status); /* paranoia: "should not happen" */ - if (udev->do_remote_wakeup) - (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE, - USB_DEVICE_REMOTE_WAKEUP, 0, - NULL, 0, - USB_CTRL_SET_TIMEOUT); + if (udev->do_remote_wakeup) { + if (!hub_is_superspeed(hub->hdev)) { + (void) usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, + USB_RECIP_DEVICE, + USB_DEVICE_REMOTE_WAKEUP, 0, + NULL, 0, + USB_CTRL_SET_TIMEOUT); + } else + (void) usb_disable_function_remotewakeup(udev); + + } /* Try to enable USB2 hardware LPM again */ if (udev->usb2_hw_lpm_capable == 1) @@ -3052,20 +3076,30 @@ static int finish_port_resume(struct usb_device *udev) * udev->reset_resume */ } else if (udev->actconfig && !udev->reset_resume) { - le16_to_cpus(&devstatus); - if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { - status = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - USB_REQ_CLEAR_FEATURE, + if (!hub_is_superspeed(udev->parent)) { + le16_to_cpus(&devstatus); + if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) + status = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE, - USB_DEVICE_REMOTE_WAKEUP, 0, - NULL, 0, - USB_CTRL_SET_TIMEOUT); - if (status) - dev_dbg(&udev->dev, - "disable remote wakeup, status %d\n", - status); + USB_DEVICE_REMOTE_WAKEUP, 0, + NULL, 0, + USB_CTRL_SET_TIMEOUT); + } else { + status = usb_get_status(udev, USB_RECIP_INTERFACE, 0, + &devstatus); + le16_to_cpus(&devstatus); + if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP + | USB_INTRF_STAT_FUNC_RW)) + status = + usb_disable_function_remotewakeup(udev); } + + if (status) + dev_dbg(&udev->dev, + "disable remote wakeup, status %d\n", + status); status = 0; } return status; |