diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/bnx2.c | 43 |
1 files changed, 25 insertions, 18 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 0f4f76fda26f..56bc41ee9a47 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -1323,7 +1323,9 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) } #define ETHTOOL_ALL_FIBRE_SPEED \ - (ADVERTISED_1000baseT_Full) + (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ? \ + (ADVERTISED_2500baseX_Full | ADVERTISED_1000baseT_Full) :\ + (ADVERTISED_1000baseT_Full) #define ETHTOOL_ALL_COPPER_SPEED \ (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ @@ -1335,6 +1337,27 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) #define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL) +static void +bnx2_set_default_link(struct bnx2 *bp) +{ + bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; + bp->req_line_speed = 0; + if (bp->phy_flags & PHY_SERDES_FLAG) { + u32 reg; + + bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; + + reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG); + reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK; + if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) { + bp->autoneg = 0; + bp->req_line_speed = bp->line_speed = SPEED_1000; + bp->req_duplex = DUPLEX_FULL; + } + } else + bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; +} + static int bnx2_setup_copper_phy(struct bnx2 *bp) { @@ -6374,23 +6397,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) } } - bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; - bp->req_line_speed = 0; - if (bp->phy_flags & PHY_SERDES_FLAG) { - bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; - - reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG); - reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK; - if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) { - bp->autoneg = 0; - bp->req_line_speed = bp->line_speed = SPEED_1000; - bp->req_duplex = DUPLEX_FULL; - } - } - else { - bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; - } - + bnx2_set_default_link(bp); bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX; init_timer(&bp->timer); |