diff options
Diffstat (limited to 'drivers/net/wireless/b43/phy_ht.h')
| -rw-r--r-- | drivers/net/wireless/b43/phy_ht.h | 83 |
1 files changed, 77 insertions, 6 deletions
diff --git a/drivers/net/wireless/b43/phy_ht.h b/drivers/net/wireless/b43/phy_ht.h index 6544c4293b34..6cae370d1018 100644 --- a/drivers/net/wireless/b43/phy_ht.h +++ b/drivers/net/wireless/b43/phy_ht.h @@ -12,18 +12,65 @@ #define B43_PHY_HT_TABLE_ADDR 0x072 /* Table address */ #define B43_PHY_HT_TABLE_DATALO 0x073 /* Table data low */ #define B43_PHY_HT_TABLE_DATAHI 0x074 /* Table data high */ +#define B43_PHY_HT_CLASS_CTL 0x0B0 /* Classifier control */ +#define B43_PHY_HT_CLASS_CTL_CCK_EN 0x0001 /* CCK enable */ +#define B43_PHY_HT_CLASS_CTL_OFDM_EN 0x0002 /* OFDM enable */ +#define B43_PHY_HT_CLASS_CTL_WAITED_EN 0x0004 /* Waited enable */ +#define B43_PHY_HT_IQLOCAL_CMDGCTL 0x0C2 /* I/Q LO cal command G control */ +#define B43_PHY_HT_SAMP_CMD 0x0C3 /* Sample command */ +#define B43_PHY_HT_SAMP_CMD_STOP 0x0002 /* Stop */ +#define B43_PHY_HT_SAMP_LOOP_CNT 0x0C4 /* Sample loop count */ +#define B43_PHY_HT_SAMP_WAIT_CNT 0x0C5 /* Sample wait count */ +#define B43_PHY_HT_SAMP_DEP_CNT 0x0C6 /* Sample depth count */ +#define B43_PHY_HT_SAMP_STAT 0x0C7 /* Sample status */ +#define B43_PHY_HT_EST_PWR_C1 0x118 +#define B43_PHY_HT_EST_PWR_C2 0x119 +#define B43_PHY_HT_EST_PWR_C3 0x11A +#define B43_PHY_HT_TSSIMODE 0x122 /* TSSI mode */ +#define B43_PHY_HT_TSSIMODE_EN 0x0001 /* TSSI enable */ +#define B43_PHY_HT_TSSIMODE_PDEN 0x0002 /* Power det enable */ #define B43_PHY_HT_BW1 0x1CE #define B43_PHY_HT_BW2 0x1CF #define B43_PHY_HT_BW3 0x1D0 #define B43_PHY_HT_BW4 0x1D1 #define B43_PHY_HT_BW5 0x1D2 #define B43_PHY_HT_BW6 0x1D3 +#define B43_PHY_HT_TXPCTL_CMD_C1 0x1E7 /* TX power control command */ +#define B43_PHY_HT_TXPCTL_CMD_C1_INIT 0x007F /* Init */ +#define B43_PHY_HT_TXPCTL_CMD_C1_COEFF 0x2000 /* Power control coefficients */ +#define B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN 0x4000 /* Hardware TX power control enable */ +#define B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN 0x8000 /* TX power control enable */ +#define B43_PHY_HT_TXPCTL_N 0x1E8 /* TX power control N num */ +#define B43_PHY_HT_TXPCTL_N_TSSID 0x00FF /* N TSSI delay */ +#define B43_PHY_HT_TXPCTL_N_TSSID_SHIFT 0 +#define B43_PHY_HT_TXPCTL_N_NPTIL2 0x0700 /* N PT integer log2 */ +#define B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT 8 +#define B43_PHY_HT_TXPCTL_IDLE_TSSI 0x1E9 /* TX power control idle TSSI */ +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1 0x003F +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT 0 +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2 0x3F00 +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT 8 +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF 0x8000 /* Raw TSSI offset bin format */ +#define B43_PHY_HT_TXPCTL_TARG_PWR 0x1EA /* TX power control target power */ +#define B43_PHY_HT_TXPCTL_TARG_PWR_C1 0x00FF /* Power 0 */ +#define B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT 0 +#define B43_PHY_HT_TXPCTL_TARG_PWR_C2 0xFF00 /* Power 1 */ +#define B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT 8 +#define B43_PHY_HT_TX_PCTL_STATUS_C1 0x1ED +#define B43_PHY_HT_TX_PCTL_STATUS_C2 0x1EE +#define B43_PHY_HT_TXPCTL_CMD_C2 0x222 +#define B43_PHY_HT_TXPCTL_CMD_C2_INIT 0x007F +#define B43_PHY_HT_RSSI_C1 0x219 +#define B43_PHY_HT_RSSI_C2 0x21A +#define B43_PHY_HT_RSSI_C3 0x21B #define B43_PHY_HT_C1_CLIP1THRES B43_PHY_OFDM(0x00E) #define B43_PHY_HT_C2_CLIP1THRES B43_PHY_OFDM(0x04E) #define B43_PHY_HT_C3_CLIP1THRES B43_PHY_OFDM(0x08E) #define B43_PHY_HT_RF_SEQ_MODE B43_PHY_EXTG(0x000) +#define B43_PHY_HT_RF_SEQ_MODE_CA_OVER 0x0001 /* Core active override */ +#define B43_PHY_HT_RF_SEQ_MODE_TR_OVER 0x0002 /* Trigger override */ #define B43_PHY_HT_RF_SEQ_TRIG B43_PHY_EXTG(0x003) #define B43_PHY_HT_RF_SEQ_TRIG_RX2TX 0x0001 /* RX2TX */ #define B43_PHY_HT_RF_SEQ_TRIG_TX2RX 0x0002 /* TX2RX */ @@ -36,12 +83,28 @@ #define B43_PHY_HT_RF_CTL1 B43_PHY_EXTG(0x010) -#define B43_PHY_HT_AFE_CTL1 B43_PHY_EXTG(0x110) -#define B43_PHY_HT_AFE_CTL2 B43_PHY_EXTG(0x111) -#define B43_PHY_HT_AFE_CTL3 B43_PHY_EXTG(0x114) -#define B43_PHY_HT_AFE_CTL4 B43_PHY_EXTG(0x115) -#define B43_PHY_HT_AFE_CTL5 B43_PHY_EXTG(0x118) -#define B43_PHY_HT_AFE_CTL6 B43_PHY_EXTG(0x119) +#define B43_PHY_HT_RF_CTL_INT_C1 B43_PHY_EXTG(0x04c) +#define B43_PHY_HT_RF_CTL_INT_C2 B43_PHY_EXTG(0x06c) +#define B43_PHY_HT_RF_CTL_INT_C3 B43_PHY_EXTG(0x08c) + +#define B43_PHY_HT_AFE_C1_OVER B43_PHY_EXTG(0x110) +#define B43_PHY_HT_AFE_C1 B43_PHY_EXTG(0x111) +#define B43_PHY_HT_AFE_C2_OVER B43_PHY_EXTG(0x114) +#define B43_PHY_HT_AFE_C2 B43_PHY_EXTG(0x115) +#define B43_PHY_HT_AFE_C3_OVER B43_PHY_EXTG(0x118) +#define B43_PHY_HT_AFE_C3 B43_PHY_EXTG(0x119) + +#define B43_PHY_HT_TXPCTL_CMD_C3 B43_PHY_EXTG(0x164) +#define B43_PHY_HT_TXPCTL_CMD_C3_INIT 0x007F +#define B43_PHY_HT_TXPCTL_IDLE_TSSI2 B43_PHY_EXTG(0x165) /* TX power control idle TSSI */ +#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3 0x003F +#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT 0 +#define B43_PHY_HT_TXPCTL_TARG_PWR2 B43_PHY_EXTG(0x166) /* TX power control target power */ +#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3 0x00FF +#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT 0 +#define B43_PHY_HT_TX_PCTL_STATUS_C3 B43_PHY_EXTG(0x169) + +#define B43_PHY_HT_TEST B43_PHY_N_BMODE(0x00A) /* Values for PHY registers used on channel switching */ @@ -56,6 +119,14 @@ struct b43_phy_ht_channeltab_e_phy { struct b43_phy_ht { + u16 rf_ctl_int_save[3]; + + bool tx_pwr_ctl; + u8 tx_pwr_idx[3]; + + s32 bb_mult_save[3]; + + u8 idle_tssi[3]; }; |