diff options
Diffstat (limited to 'drivers/gpu/drm/gma500/mdfld_device.c')
| -rw-r--r-- | drivers/gpu/drm/gma500/mdfld_device.c | 691 |
1 files changed, 691 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/mdfld_device.c b/drivers/gpu/drm/gma500/mdfld_device.c new file mode 100644 index 000000000000..af656787db0f --- /dev/null +++ b/drivers/gpu/drm/gma500/mdfld_device.c @@ -0,0 +1,691 @@ +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + **************************************************************************/ + +#include "psb_drv.h" +#include "mid_bios.h" +#include "mdfld_output.h" +#include "mdfld_dsi_output.h" +#include "tc35876x-dsi-lvds.h" + +#include <asm/intel_scu_ipc.h> + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ +#define BLC_PWM_FREQ_CALC_CONSTANT 32 +#define MHz 1000000 +#define BRIGHTNESS_MIN_LEVEL 1 +#define BRIGHTNESS_MAX_LEVEL 100 +#define BRIGHTNESS_MASK 0xFF +#define BLC_POLARITY_NORMAL 0 +#define BLC_POLARITY_INVERSE 1 +#define BLC_ADJUSTMENT_MAX 100 + +#define MDFLD_BLC_PWM_PRECISION_FACTOR 10 +#define MDFLD_BLC_MAX_PWM_REG_FREQ 0xFFFE +#define MDFLD_BLC_MIN_PWM_REG_FREQ 0x2 + +#define MDFLD_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) +#define MDFLD_BACKLIGHT_PWM_CTL_SHIFT (16) + +static struct backlight_device *mdfld_backlight_device; + +int mdfld_set_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = + (struct drm_device *)bl_get_data(mdfld_backlight_device); + struct drm_psb_private *dev_priv = dev->dev_private; + int level = bd->props.brightness; + + DRM_DEBUG_DRIVER("backlight level set to %d\n", level); + + /* Perform value bounds checking */ + if (level < BRIGHTNESS_MIN_LEVEL) + level = BRIGHTNESS_MIN_LEVEL; + + if (gma_power_begin(dev, false)) { + u32 adjusted_level = 0; + + /* + * Adjust the backlight level with the percent in + * dev_priv->blc_adj2 + */ + adjusted_level = level * dev_priv->blc_adj2; + adjusted_level = adjusted_level / BLC_ADJUSTMENT_MAX; + dev_priv->brightness_adjusted = adjusted_level; + + if (mdfld_get_panel_type(dev, 0) == TC35876X) { + if (dev_priv->dpi_panel_on[0] || + dev_priv->dpi_panel_on[2]) + tc35876x_brightness_control(dev, + dev_priv->brightness_adjusted); + } else { + if (dev_priv->dpi_panel_on[0]) + mdfld_dsi_brightness_control(dev, 0, + dev_priv->brightness_adjusted); + } + + if (dev_priv->dpi_panel_on[2]) + mdfld_dsi_brightness_control(dev, 2, + dev_priv->brightness_adjusted); + gma_power_end(dev); + } + + /* cache the brightness for later use */ + dev_priv->brightness = level; + return 0; +} + +static int mdfld_get_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = + (struct drm_device *)bl_get_data(mdfld_backlight_device); + struct drm_psb_private *dev_priv = dev->dev_private; + + DRM_DEBUG_DRIVER("brightness = 0x%x \n", dev_priv->brightness); + + /* return locally cached var instead of HW read (due to DPST etc.) */ + return dev_priv->brightness; +} + +static const struct backlight_ops mdfld_ops = { + .get_brightness = mdfld_get_brightness, + .update_status = mdfld_set_brightness, +}; + +static int device_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = (struct drm_psb_private *) + dev->dev_private; + + dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; + dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; + + return 0; +} + +static int mdfld_backlight_init(struct drm_device *dev) +{ + struct backlight_properties props; + int ret = 0; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = BRIGHTNESS_MAX_LEVEL; + props.type = BACKLIGHT_PLATFORM; + mdfld_backlight_device = backlight_device_register("mdfld-bl", + NULL, (void *)dev, &mdfld_ops, &props); + + if (IS_ERR(mdfld_backlight_device)) + return PTR_ERR(mdfld_backlight_device); + + ret = device_backlight_init(dev); + if (ret) + return ret; + + mdfld_backlight_device->props.brightness = BRIGHTNESS_MAX_LEVEL; + mdfld_backlight_device->props.max_brightness = BRIGHTNESS_MAX_LEVEL; + backlight_update_status(mdfld_backlight_device); + return 0; +} +#endif + +struct backlight_device *mdfld_get_backlight_device(void) +{ +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + return mdfld_backlight_device; +#else + return NULL; +#endif +} + +/* + * mdfld_save_display_registers + * + * Description: We are going to suspend so save current display + * register state. + * + * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio + */ +static int mdfld_save_display_registers(struct drm_device *dev, int pipe) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct medfield_state *regs = &dev_priv->regs.mdfld; + int i; + + /* register */ + u32 dpll_reg = MRST_DPLL_A; + u32 fp_reg = MRST_FPA0; + u32 pipeconf_reg = PIPEACONF; + u32 htot_reg = HTOTAL_A; + u32 hblank_reg = HBLANK_A; + u32 hsync_reg = HSYNC_A; + u32 vtot_reg = VTOTAL_A; + u32 vblank_reg = VBLANK_A; + u32 vsync_reg = VSYNC_A; + u32 pipesrc_reg = PIPEASRC; + u32 dspstride_reg = DSPASTRIDE; + u32 dsplinoff_reg = DSPALINOFF; + u32 dsptileoff_reg = DSPATILEOFF; + u32 dspsize_reg = DSPASIZE; + u32 dsppos_reg = DSPAPOS; + u32 dspsurf_reg = DSPASURF; + u32 mipi_reg = MIPI; + u32 dspcntr_reg = DSPACNTR; + u32 dspstatus_reg = PIPEASTAT; + u32 palette_reg = PALETTE_A; + + /* pointer to values */ + u32 *dpll_val = ®s->saveDPLL_A; + u32 *fp_val = ®s->saveFPA0; + u32 *pipeconf_val = ®s->savePIPEACONF; + u32 *htot_val = ®s->saveHTOTAL_A; + u32 *hblank_val = ®s->saveHBLANK_A; + u32 *hsync_val = ®s->saveHSYNC_A; + u32 *vtot_val = ®s->saveVTOTAL_A; + u32 *vblank_val = ®s->saveVBLANK_A; + u32 *vsync_val = ®s->saveVSYNC_A; + u32 *pipesrc_val = ®s->savePIPEASRC; + u32 *dspstride_val = ®s->saveDSPASTRIDE; + u32 *dsplinoff_val = ®s->saveDSPALINOFF; + u32 *dsptileoff_val = ®s->saveDSPATILEOFF; + u32 *dspsize_val = ®s->saveDSPASIZE; + u32 *dsppos_val = ®s->saveDSPAPOS; + u32 *dspsurf_val = ®s->saveDSPASURF; + u32 *mipi_val = ®s->saveMIPI; + u32 *dspcntr_val = ®s->saveDSPACNTR; + u32 *dspstatus_val = ®s->saveDSPASTATUS; + u32 *palette_val = regs->save_palette_a; + + switch (pipe) { + case 0: + break; + case 1: + /* regester */ + dpll_reg = MDFLD_DPLL_B; + fp_reg = MDFLD_DPLL_DIV0; + pipeconf_reg = PIPEBCONF; + htot_reg = HTOTAL_B; + hblank_reg = HBLANK_B; + hsync_reg = HSYNC_B; + vtot_reg = VTOTAL_B; + vblank_reg = VBLANK_B; + vsync_reg = VSYNC_B; + pipesrc_reg = PIPEBSRC; + dspstride_reg = DSPBSTRIDE; + dsplinoff_reg = DSPBLINOFF; + dsptileoff_reg = DSPBTILEOFF; + dspsize_reg = DSPBSIZE; + dsppos_reg = DSPBPOS; + dspsurf_reg = DSPBSURF; + dspcntr_reg = DSPBCNTR; + dspstatus_reg = PIPEBSTAT; + palette_reg = PALETTE_B; + + /* values */ + dpll_val = ®s->saveDPLL_B; + fp_val = ®s->saveFPB0; + pipeconf_val = ®s->savePIPEBCONF; + htot_val = ®s->saveHTOTAL_B; + hblank_val = ®s->saveHBLANK_B; + hsync_val = ®s->saveHSYNC_B; + vtot_val = ®s->saveVTOTAL_B; + vblank_val = ®s->saveVBLANK_B; + vsync_val = ®s->saveVSYNC_B; + pipesrc_val = ®s->savePIPEBSRC; + dspstride_val = ®s->saveDSPBSTRIDE; + dsplinoff_val = ®s->saveDSPBLINOFF; + dsptileoff_val = ®s->saveDSPBTILEOFF; + dspsize_val = ®s->saveDSPBSIZE; + dsppos_val = ®s->saveDSPBPOS; + dspsurf_val = ®s->saveDSPBSURF; + dspcntr_val = ®s->saveDSPBCNTR; + dspstatus_val = ®s->saveDSPBSTATUS; + palette_val = regs->save_palette_b; + break; + case 2: + /* register */ + pipeconf_reg = PIPECCONF; + htot_reg = HTOTAL_C; + hblank_reg = HBLANK_C; + hsync_reg = HSYNC_C; + vtot_reg = VTOTAL_C; + vblank_reg = VBLANK_C; + vsync_reg = VSYNC_C; + pipesrc_reg = PIPECSRC; + dspstride_reg = DSPCSTRIDE; + dsplinoff_reg = DSPCLINOFF; + dsptileoff_reg = DSPCTILEOFF; + dspsize_reg = DSPCSIZE; + dsppos_reg = DSPCPOS; + dspsurf_reg = DSPCSURF; + mipi_reg = MIPI_C; + dspcntr_reg = DSPCCNTR; + dspstatus_reg = PIPECSTAT; + palette_reg = PALETTE_C; + + /* pointer to values */ + pipeconf_val = ®s->savePIPECCONF; + htot_val = ®s->saveHTOTAL_C; + hblank_val = ®s->saveHBLANK_C; + hsync_val = ®s->saveHSYNC_C; + vtot_val = ®s->saveVTOTAL_C; + vblank_val = ®s->saveVBLANK_C; + vsync_val = ®s->saveVSYNC_C; + pipesrc_val = ®s->savePIPECSRC; + dspstride_val = ®s->saveDSPCSTRIDE; + dsplinoff_val = ®s->saveDSPCLINOFF; + dsptileoff_val = ®s->saveDSPCTILEOFF; + dspsize_val = ®s->saveDSPCSIZE; + dsppos_val = ®s->saveDSPCPOS; + dspsurf_val = ®s->saveDSPCSURF; + mipi_val = ®s->saveMIPI_C; + dspcntr_val = ®s->saveDSPCCNTR; + dspstatus_val = ®s->saveDSPCSTATUS; + palette_val = regs->save_palette_c; + break; + default: + DRM_ERROR("%s, invalid pipe number.\n", __func__); + return -EINVAL; + } + + /* Pipe & plane A info */ + *dpll_val = PSB_RVDC32(dpll_reg); + *fp_val = PSB_RVDC32(fp_reg); + *pipeconf_val = PSB_RVDC32(pipeconf_reg); + *htot_val = PSB_RVDC32(htot_reg); + *hblank_val = PSB_RVDC32(hblank_reg); + *hsync_val = PSB_RVDC32(hsync_reg); + *vtot_val = PSB_RVDC32(vtot_reg); + *vblank_val = PSB_RVDC32(vblank_reg); + *vsync_val = PSB_RVDC32(vsync_reg); + *pipesrc_val = PSB_RVDC32(pipesrc_reg); + *dspstride_val = PSB_RVDC32(dspstride_reg); + *dsplinoff_val = PSB_RVDC32(dsplinoff_reg); + *dsptileoff_val = PSB_RVDC32(dsptileoff_reg); + *dspsize_val = PSB_RVDC32(dspsize_reg); + *dsppos_val = PSB_RVDC32(dsppos_reg); + *dspsurf_val = PSB_RVDC32(dspsurf_reg); + *dspcntr_val = PSB_RVDC32(dspcntr_reg); + *dspstatus_val = PSB_RVDC32(dspstatus_reg); + + /*save palette (gamma) */ + for (i = 0; i < 256; i++) + palette_val[i] = PSB_RVDC32(palette_reg + (i << 2)); + + if (pipe == 1) { + regs->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); + regs->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); + + regs->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL); + regs->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL); + return 0; + } + + *mipi_val = PSB_RVDC32(mipi_reg); + return 0; +} + +/* + * mdfld_restore_display_registers + * + * Description: We are going to resume so restore display register state. + * + * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio + */ +static int mdfld_restore_display_registers(struct drm_device *dev, int pipe) +{ + /* To get panel out of ULPS mode. */ + u32 temp = 0; + u32 device_ready_reg = DEVICE_READY_REG; + struct drm_psb_private *dev_priv = dev->dev_private; + struct mdfld_dsi_config *dsi_config = NULL; + struct medfield_state *regs = &dev_priv->regs.mdfld; + u32 i = 0; + u32 dpll = 0; + u32 timeout = 0; + + /* regester */ + u32 dpll_reg = MRST_DPLL_A; + u32 fp_reg = MRST_FPA0; + u32 pipeconf_reg = PIPEACONF; + u32 htot_reg = HTOTAL_A; + u32 hblank_reg = HBLANK_A; + u32 hsync_reg = HSYNC_A; + u32 vtot_reg = VTOTAL_A; + u32 vblank_reg = VBLANK_A; + u32 vsync_reg = VSYNC_A; + u32 pipesrc_reg = PIPEASRC; + u32 dspstride_reg = DSPASTRIDE; + u32 dsplinoff_reg = DSPALINOFF; + u32 dsptileoff_reg = DSPATILEOFF; + u32 dspsize_reg = DSPASIZE; + u32 dsppos_reg = DSPAPOS; + u32 dspsurf_reg = DSPASURF; + u32 dspstatus_reg = PIPEASTAT; + u32 mipi_reg = MIPI; + u32 dspcntr_reg = DSPACNTR; + u32 palette_reg = PALETTE_A; + + /* values */ + u32 dpll_val = regs->saveDPLL_A & ~DPLL_VCO_ENABLE; + u32 fp_val = regs->saveFPA0; + u32 pipeconf_val = regs->savePIPEACONF; + u32 htot_val = regs->saveHTOTAL_A; + u32 hblank_val = regs->saveHBLANK_A; + u32 hsync_val = regs->saveHSYNC_A; + u32 vtot_val = regs->saveVTOTAL_A; + u32 vblank_val = regs->saveVBLANK_A; + u32 vsync_val = regs->saveVSYNC_A; + u32 pipesrc_val = regs->savePIPEASRC; + u32 dspstride_val = regs->saveDSPASTRIDE; + u32 dsplinoff_val = regs->saveDSPALINOFF; + u32 dsptileoff_val = regs->saveDSPATILEOFF; + u32 dspsize_val = regs->saveDSPASIZE; + u32 dsppos_val = regs->saveDSPAPOS; + u32 dspsurf_val = regs->saveDSPASURF; + u32 dspstatus_val = regs->saveDSPASTATUS; + u32 mipi_val = regs->saveMIPI; + u32 dspcntr_val = regs->saveDSPACNTR; + u32 *palette_val = regs->save_palette_a; + + switch (pipe) { + case 0: + dsi_config = dev_priv->dsi_configs[0]; + break; + case 1: + /* regester */ + dpll_reg = MDFLD_DPLL_B; + fp_reg = MDFLD_DPLL_DIV0; + pipeconf_reg = PIPEBCONF; + htot_reg = HTOTAL_B; + hblank_reg = HBLANK_B; + hsync_reg = HSYNC_B; + vtot_reg = VTOTAL_B; + vblank_reg = VBLANK_B; + vsync_reg = VSYNC_B; + pipesrc_reg = PIPEBSRC; + dspstride_reg = DSPBSTRIDE; + dsplinoff_reg = DSPBLINOFF; + dsptileoff_reg = DSPBTILEOFF; + dspsize_reg = DSPBSIZE; + dsppos_reg = DSPBPOS; + dspsurf_reg = DSPBSURF; + dspcntr_reg = DSPBCNTR; + dspstatus_reg = PIPEBSTAT; + palette_reg = PALETTE_B; + + /* values */ + dpll_val = regs->saveDPLL_B & ~DPLL_VCO_ENABLE; + fp_val = regs->saveFPB0; + pipeconf_val = regs->savePIPEBCONF; + htot_val = regs->saveHTOTAL_B; + hblank_val = regs->saveHBLANK_B; + hsync_val = regs->saveHSYNC_B; + vtot_val = regs->saveVTOTAL_B; + vblank_val = regs->saveVBLANK_B; + vsync_val = regs->saveVSYNC_B; + pipesrc_val = regs->savePIPEBSRC; + dspstride_val = regs->saveDSPBSTRIDE; + dsplinoff_val = regs->saveDSPBLINOFF; + dsptileoff_val = regs->saveDSPBTILEOFF; + dspsize_val = regs->saveDSPBSIZE; + dsppos_val = regs->saveDSPBPOS; + dspsurf_val = regs->saveDSPBSURF; + dspcntr_val = regs->saveDSPBCNTR; + dspstatus_val = regs->saveDSPBSTATUS; + palette_val = regs->save_palette_b; + break; + case 2: + /* regester */ + pipeconf_reg = PIPECCONF; + htot_reg = HTOTAL_C; + hblank_reg = HBLANK_C; + hsync_reg = HSYNC_C; + vtot_reg = VTOTAL_C; + vblank_reg = VBLANK_C; + vsync_reg = VSYNC_C; + pipesrc_reg = PIPECSRC; + dspstride_reg = DSPCSTRIDE; + dsplinoff_reg = DSPCLINOFF; + dsptileoff_reg = DSPCTILEOFF; + dspsize_reg = DSPCSIZE; + dsppos_reg = DSPCPOS; + dspsurf_reg = DSPCSURF; + mipi_reg = MIPI_C; + dspcntr_reg = DSPCCNTR; + dspstatus_reg = PIPECSTAT; + palette_reg = PALETTE_C; + + /* values */ + pipeconf_val = regs->savePIPECCONF; + htot_val = regs->saveHTOTAL_C; + hblank_val = regs->saveHBLANK_C; + hsync_val = regs->saveHSYNC_C; + vtot_val = regs->saveVTOTAL_C; + vblank_val = regs->saveVBLANK_C; + vsync_val = regs->saveVSYNC_C; + pipesrc_val = regs->savePIPECSRC; + dspstride_val = regs->saveDSPCSTRIDE; + dsplinoff_val = regs->saveDSPCLINOFF; + dsptileoff_val = regs->saveDSPCTILEOFF; + dspsize_val = regs->saveDSPCSIZE; + dsppos_val = regs->saveDSPCPOS; + dspsurf_val = regs->saveDSPCSURF; + mipi_val = regs->saveMIPI_C; + dspcntr_val = regs->saveDSPCCNTR; + dspstatus_val = regs->saveDSPCSTATUS; + palette_val = regs->save_palette_c; + + dsi_config = dev_priv->dsi_configs[1]; + break; + default: + DRM_ERROR("%s, invalid pipe number.\n", __func__); + return -EINVAL; + } + + /*make sure VGA plane is off. it initializes to on after reset!*/ + PSB_WVDC32(0x80000000, VGACNTRL); + + if (pipe == 1) { + PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, dpll_reg); + PSB_RVDC32(dpll_reg); + + PSB_WVDC32(fp_val, fp_reg); + } else { + + dpll = PSB_RVDC32(dpll_reg); + + if (!(dpll & DPLL_VCO_ENABLE)) { + + /* When ungating power of DPLL, needs to wait 0.5us + before enable the VCO */ + if (dpll & MDFLD_PWR_GATE_EN) { + dpll &= ~MDFLD_PWR_GATE_EN; + PSB_WVDC32(dpll, dpll_reg); + /* FIXME_MDFLD PO - change 500 to 1 after PO */ + udelay(500); + } + + PSB_WVDC32(fp_val, fp_reg); + PSB_WVDC32(dpll_val, dpll_reg); + /* FIXME_MDFLD PO - change 500 to 1 after PO */ + udelay(500); + + dpll_val |= DPLL_VCO_ENABLE; + PSB_WVDC32(dpll_val, dpll_reg); + PSB_RVDC32(dpll_reg); + + /* wait for DSI PLL to lock */ + while (timeout < 20000 && + !(PSB_RVDC32(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) { + udelay(150); + timeout++; + } + + if (timeout == 20000) { + DRM_ERROR("%s, can't lock DSIPLL.\n", + __func__); + return -EINVAL; + } + } + } + /* Restore mode */ + PSB_WVDC32(htot_val, htot_reg); + PSB_WVDC32(hblank_val, hblank_reg); + PSB_WVDC32(hsync_val, hsync_reg); + PSB_WVDC32(vtot_val, vtot_reg); + PSB_WVDC32(vblank_val, vblank_reg); + PSB_WVDC32(vsync_val, vsync_reg); + PSB_WVDC32(pipesrc_val, pipesrc_reg); + PSB_WVDC32(dspstatus_val, dspstatus_reg); + + /*set up the plane*/ + PSB_WVDC32(dspstride_val, dspstride_reg); + PSB_WVDC32(dsplinoff_val, dsplinoff_reg); + PSB_WVDC32(dsptileoff_val, dsptileoff_reg); + PSB_WVDC32(dspsize_val, dspsize_reg); + PSB_WVDC32(dsppos_val, dsppos_reg); + PSB_WVDC32(dspsurf_val, dspsurf_reg); + + if (pipe == 1) { + /* restore palette (gamma) */ + /*DRM_UDELAY(50000); */ + for (i = 0; i < 256; i++) + PSB_WVDC32(palette_val[i], palette_reg + (i << 2)); + + PSB_WVDC32(regs->savePFIT_CONTROL, PFIT_CONTROL); + PSB_WVDC32(regs->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); + + /*TODO: resume HDMI port */ + + /*TODO: resume pipe*/ + + /*enable the plane*/ + PSB_WVDC32(dspcntr_val & ~DISPLAY_PLANE_ENABLE, dspcntr_reg); + + return 0; + } + + /*set up pipe related registers*/ + PSB_WVDC32(mipi_val, mipi_reg); + + /*setup MIPI adapter + MIPI IP registers*/ + if (dsi_config) + mdfld_dsi_controller_init(dsi_config, pipe); + + if (in_atomic() || in_interrupt()) + mdelay(20); + else + msleep(20); + + /*enable the plane*/ + PSB_WVDC32(dspcntr_val, dspcntr_reg); + + if (in_atomic() || in_interrupt()) + mdelay(20); + else + msleep(20); + + /* LP Hold Release */ + temp = REG_READ(mipi_reg); + temp |= LP_OUTPUT_HOLD_RELEASE; + REG_WRITE(mipi_reg, temp); + mdelay(1); + + + /* Set DSI host to exit from Utra Low Power State */ + temp = REG_READ(device_ready_reg); + temp &= ~ULPS_MASK; + temp |= 0x3; + temp |= EXIT_ULPS_DEV_READY; + REG_WRITE(device_ready_reg, temp); + mdelay(1); + + temp = REG_READ(device_ready_reg); + temp &= ~ULPS_MASK; + temp |= EXITING_ULPS; + REG_WRITE(device_ready_reg, temp); + mdelay(1); + + /*enable the pipe*/ + PSB_WVDC32(pipeconf_val, pipeconf_reg); + + /* restore palette (gamma) */ + /*DRM_UDELAY(50000); */ + for (i = 0; i < 256; i++) + PSB_WVDC32(palette_val[i], palette_reg + (i << 2)); + + return 0; +} + +static int mdfld_save_registers(struct drm_device *dev) +{ + /* mdfld_save_cursor_overlay_registers(dev); */ + mdfld_save_display_registers(dev, 0); + mdfld_save_display_registers(dev, 2); + mdfld_disable_crtc(dev, 0); + mdfld_disable_crtc(dev, 2); + + return 0; +} + +static int mdfld_restore_registers(struct drm_device *dev) +{ + mdfld_restore_display_registers(dev, 2); + mdfld_restore_display_registers(dev, 0); + /* mdfld_restore_cursor_overlay_registers(dev); */ + + return 0; +} + +static int mdfld_power_down(struct drm_device *dev) +{ + /* FIXME */ + return 0; +} + +static int mdfld_power_up(struct drm_device *dev) +{ + /* FIXME */ + return 0; +} + +const struct psb_ops mdfld_chip_ops = { + .name = "mdfld", + .accel_2d = 0, + .pipes = 3, + .crtcs = 3, + .sgx_offset = MRST_SGX_OFFSET, + + .chip_setup = mid_chip_setup, + .crtc_helper = &mdfld_helper_funcs, + .crtc_funcs = &psb_intel_crtc_funcs, + + .output_init = mdfld_output_init, + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + .backlight_init = mdfld_backlight_init, +#endif + + .save_regs = mdfld_save_registers, + .restore_regs = mdfld_restore_registers, + .power_down = mdfld_power_down, + .power_up = mdfld_power_up, +}; |