[SCSI] SAS: consolidate linkspeed definitions

At the moment we have two separate linkspeed enumerations covering
roughly the same values.  This patch consolidates on a single one enum
sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the
aic94xx driver.  Eventually I'll get around to removing the duplicated
fields in asd_sas_phy and sas_phy ...

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

3 files changed, 24 insertions, 30 deletions

diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 72acdabe7f80..8d91313dd888 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -114,7 +114,7 @@ struct ex_phy {
 	enum ex_phy_state phy_state;
 
 	enum sas_dev_type attached_dev_type;
-	enum sas_phy_linkrate linkrate;
+	enum sas_linkrate linkrate;
 
 	u8   attached_sata_host:1;
 	u8   attached_sata_dev:1;
@@ -170,9 +170,9 @@ struct sata_device {
 struct domain_device {
         enum sas_dev_type dev_type;
 
-        enum sas_phy_linkrate linkrate;
-        enum sas_phy_linkrate min_linkrate;
-        enum sas_phy_linkrate max_linkrate;
+        enum sas_linkrate linkrate;
+        enum sas_linkrate min_linkrate;
+        enum sas_linkrate max_linkrate;
 
         int  pathways;
 
@@ -220,7 +220,7 @@ struct asd_sas_port {
 	struct domain_device *port_dev;
 	spinlock_t dev_list_lock;
 	struct list_head dev_list;
-	enum   sas_phy_linkrate linkrate;
+	enum   sas_linkrate linkrate;
 
 	struct sas_phy *phy;
 	struct work_struct work;
@@ -276,7 +276,7 @@ struct asd_sas_phy {
 	enum sas_phy_type  type;
 	enum sas_phy_role  role;
 	enum sas_oob_mode  oob_mode;
-	enum sas_phy_linkrate linkrate;
+	enum sas_linkrate linkrate;
 
 	u8   *sas_addr;		  /* must be set */
 	u8   attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
@@ -368,7 +368,7 @@ void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
 static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
 {
 	phy->oob_mode = OOB_NOT_CONNECTED;
-	phy->linkrate = PHY_LINKRATE_NONE;
+	phy->linkrate = SAS_LINK_RATE_UNKNOWN;
 }
 
 /* ---------- Tasks ---------- */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 752853a113dc..9c8a5b91ae64 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -102,20 +102,6 @@ enum sas_dev_type {
 	SATA_PM_PORT= 8,
 };
 
-enum sas_phy_linkrate {
-	PHY_LINKRATE_NONE = 0,
-	PHY_LINKRATE_UNKNOWN = 0,
-	PHY_DISABLED,
-	PHY_RESET_PROBLEM,
-	PHY_SPINUP_HOLD,
-	PHY_PORT_SELECTOR,
-	PHY_LINKRATE_1_5 = 0x08,
-	PHY_LINKRATE_G1  = PHY_LINKRATE_1_5,
-	PHY_LINKRATE_3   = 0x09,
-	PHY_LINKRATE_G2  = PHY_LINKRATE_3,
-	PHY_LINKRATE_6   = 0x0A,
-};
-
 /* Partly from IDENTIFY address frame. */
 enum sas_proto {
 	SATA_PROTO    = 1,
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index eeb2200de855..87de518960c1 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -24,15 +24,23 @@ enum sas_protocol {
 };
 
 enum sas_linkrate {
-	SAS_LINK_RATE_UNKNOWN,
-	SAS_PHY_DISABLED,
-	SAS_LINK_RATE_FAILED,
-	SAS_SATA_SPINUP_HOLD,
-	SAS_SATA_PORT_SELECTOR,
-	SAS_LINK_RATE_1_5_GBPS,
-	SAS_LINK_RATE_3_0_GBPS,
-	SAS_LINK_RATE_6_0_GBPS,
-	SAS_LINK_VIRTUAL,
+	/* These Values are defined in the SAS standard */
+	SAS_LINK_RATE_UNKNOWN = 0,
+	SAS_PHY_DISABLED = 1,
+	SAS_PHY_RESET_PROBLEM = 2,
+	SAS_SATA_SPINUP_HOLD = 3,
+	SAS_SATA_PORT_SELECTOR = 4,
+	SAS_PHY_RESET_IN_PROGRESS = 5,
+	SAS_LINK_RATE_1_5_GBPS = 8,
+	SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
+	SAS_LINK_RATE_3_0_GBPS = 9,
+	SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
+	SAS_LINK_RATE_6_0_GBPS = 10,
+	/* These are virtual to the transport class and may never
+	 * be signalled normally since the standard defined field
+	 * is only 4 bits */
+	SAS_LINK_RATE_FAILED = 0x10,
+	SAS_PHY_VIRTUAL = 0x11,
 };
 
 struct sas_identify {