[ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...

Signed-off-by: Len Brown <len.brown@intel.com>

3 files changed, 130 insertions, 6 deletions

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index bc01d34e2634..e9e37abe1f76 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -1,9 +1,10 @@
 /*
  * File:	pci-acpi.c
- * Purpose:	Provide PCI supports in ACPI
+ * Purpose:	Provide PCI support in ACPI
  *
- * Copyright (C) 2004 Intel
- * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com>
+ * Copyright (C) 2004 Intel Corp.
  */
 
 #include <linux/delay.h>
@@ -16,6 +17,7 @@
 #include <acpi/acpi_bus.h>
 
 #include <linux/pci-acpi.h>
+#include "pci.h"
 
 static u32 ctrlset_buf[3] = {0, 0, 0};
 static u32 global_ctrlsets = 0;
@@ -207,3 +209,105 @@ acpi_status pci_osc_control_set(u32 flags)
 	return status;
 }
 EXPORT_SYMBOL(pci_osc_control_set);
+
+/*
+ * _SxD returns the D-state with the highest power
+ * (lowest D-state number) supported in the S-state "x".
+ *
+ * If the devices does not have a _PRW
+ * (Power Resources for Wake) supporting system wakeup from "x"
+ * then the OS is free to choose a lower power (higher number
+ * D-state) than the return value from _SxD.
+ *
+ * But if _PRW is enabled at S-state "x", the OS
+ * must not choose a power lower than _SxD --
+ * unless the device has an _SxW method specifying
+ * the lowest power (highest D-state number) the device
+ * may enter while still able to wake the system.
+ *
+ * ie. depending on global OS policy:
+ *
+ * if (_PRW at S-state x)
+ *	choose from highest power _SxD to lowest power _SxW
+ * else // no _PRW at S-state x
+ * 	choose highest power _SxD or any lower power
+ *
+ * currently we simply return _SxD, if present.
+ */
+
+static int acpi_pci_choose_state(struct pci_dev *pdev, pm_message_t state)
+{
+	/* TBD */
+
+	return -ENODEV;
+}
+
+static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+	static int state_conv[] = {
+		[0] = 0,
+		[1] = 1,
+		[2] = 2,
+		[3] = 3,
+		[4] = 3
+	};
+	int acpi_state = state_conv[(int __force) state];
+
+	if (!handle)
+		return -ENODEV;
+	return acpi_bus_set_power(handle, acpi_state);
+}
+
+
+/* ACPI bus type */
+static int pci_acpi_find_device(struct device *dev, acpi_handle *handle)
+{
+	struct pci_dev * pci_dev;
+	acpi_integer	addr;
+
+	pci_dev = to_pci_dev(dev);
+	/* Please ref to ACPI spec for the syntax of _ADR */
+	addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
+	*handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
+	if (!*handle)
+		return -ENODEV;
+	return 0;
+}
+
+static int pci_acpi_find_root_bridge(struct device *dev, acpi_handle *handle)
+{
+	int num;
+	unsigned int seg, bus;
+
+	/*
+	 * The string should be the same as root bridge's name
+	 * Please look at 'pci_scan_bus_parented'
+	 */
+	num = sscanf(dev->bus_id, "pci%04x:%02x", &seg, &bus);
+	if (num != 2)
+		return -ENODEV;
+	*handle = acpi_get_pci_rootbridge_handle(seg, bus);
+	if (!*handle)
+		return -ENODEV;
+	return 0;
+}
+
+static struct acpi_bus_type pci_acpi_bus = {
+	.bus = &pci_bus_type,
+	.find_device = pci_acpi_find_device,
+	.find_bridge = pci_acpi_find_root_bridge,
+};
+
+static int __init pci_acpi_init(void)
+{
+	int ret;
+
+	ret = register_acpi_bus_type(&pci_acpi_bus);
+	if (ret)
+		return 0;
+	platform_pci_choose_state = acpi_pci_choose_state;
+	platform_pci_set_power_state = acpi_pci_set_power_state;
+	return 0;
+}
+arch_initcall(pci_acpi_init);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d382bdb7b560..1b34fc56067e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -235,7 +235,7 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
  * -EIO if device does not support PCI PM.
  * 0 if we can successfully change the power state.
  */
-
+int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
 int
 pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 {
@@ -299,11 +299,20 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		msleep(10);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
 		udelay(200);
-	dev->current_state = state;
 
+	/*
+	 * Give firmware a chance to be called, such as ACPI _PRx, _PSx
+	 * Firmware method after natice method ?
+	 */
+	if (platform_pci_set_power_state)
+		platform_pci_set_power_state(dev, state);
+
+	dev->current_state = state;
 	return 0;
 }
 
+int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
+ 
 /**
  * pci_choose_state - Choose the power state of a PCI device
  * @dev: PCI device to be suspended
@@ -316,10 +325,17 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
 {
+	int ret;
+
 	if (!pci_find_capability(dev, PCI_CAP_ID_PM))
 		return PCI_D0;
 
-	switch (state) {
+	if (platform_pci_choose_state) {
+		ret = platform_pci_choose_state(dev, state);
+		if (ret >= 0)
+			state = ret;
+	}
+ 	switch (state) {
 	case 0: return PCI_D0;
 	case 3: return PCI_D3hot;
 	default:
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 744da0d4ae5f..d94d7af4f7a0 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -11,6 +11,10 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 				  void (*alignf)(void *, struct resource *,
 					  	 unsigned long, unsigned long),
 				  void *alignf_data);
+/* Firmware callbacks */
+extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
+extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state);
+
 /* PCI /proc functions */
 #ifdef CONFIG_PROC_FS
 extern int pci_proc_attach_device(struct pci_dev *dev);