diff options
| author | Ohad Ben-Cohen <ohad@wizery.com> | 2010-11-28 07:21:29 +0200 |
|---|---|---|
| committer | Chris Ball <cjb@laptop.org> | 2011-01-08 22:48:17 -0500 |
| commit | 080bc9774b6f1e3866747b18631bad26f47c22ce (patch) | |
| tree | 07ac4d1539b75036083d8b3c499e213fcca09cc4 /drivers/mmc | |
| parent | e594573d790bd7e269f05955d316b88f7be0c14a (diff) | |
mmc: sdio: don't reinitialize nonremovable powered-resumed cards
Upon system resume, SDIO core must reinitialize cards that were
powered off during suspend.
If the card had its power kept during suspend (and thus it is
'powered-resumed'), SDIO core performs only a limited reinitializing,
mainly needed to make sure that the card wasn't removed/replaced.
If a __nonremovable__ card is powered-resumed, we can safely skip the
reinitializing phase.
Note: 9b966aa (mmc: sdio: fully reconfigure oldcard on resume) removed
the bus width reconfiguration since mmc_sdio_init_card already does it.
It is brought back now in case mmc_sdio_init_card is skipped.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/core/sdio.c | 16 |
1 files changed, 14 insertions, 2 deletions
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index c18810ab6465..82f4b9008987 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -627,15 +627,27 @@ static int mmc_sdio_suspend(struct mmc_host *host) static int mmc_sdio_resume(struct mmc_host *host) { - int i, err; + int i, err = 0; BUG_ON(!host); BUG_ON(!host->card); /* Basic card reinitialization. */ mmc_claim_host(host); - err = mmc_sdio_init_card(host, host->ocr, host->card, + + /* No need to reinitialize powered-resumed nonremovable cards */ + if (mmc_card_is_removable(host) || !mmc_card_is_powered_resumed(host)) + err = mmc_sdio_init_card(host, host->ocr, host->card, (host->pm_flags & MMC_PM_KEEP_POWER)); + else if (mmc_card_is_powered_resumed(host)) { + /* We may have switched to 1-bit mode during suspend */ + err = sdio_enable_4bit_bus(host->card); + if (err > 0) { + mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + err = 0; + } + } + if (!err && host->sdio_irqs) mmc_signal_sdio_irq(host); mmc_release_host(host); |