diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-14 13:42:43 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-14 13:42:43 -0700 |
| commit | 2cf4d4514d5b43c1f3b64bd0ec8b9853bde8f1dc (patch) | |
| tree | e35a625496acc6ac852846d40b8851186b9d1ac4 /arch | |
| parent | 44b7532b8b464f606053562400719c9c21276037 (diff) | |
| parent | ce53895a5d24e0ee19fb92f56c17323fb4c9ab27 (diff) | |
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
MAINTAINERS: EB110ATX is not ebsa110
MAINTAINERS: update Eric Miao's email address and status
fb: add support of LCD display controller on pxa168/910 (base layer)
[ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
[ARM] 5544/1: Trust PrimeCell resource sizes
[ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
[ARM] pxa/sharpsl_pm: drop set_irq_type calls
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
[ARM] sa1100: remove unused collie_pm.c
[ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
[ARM] 5550/1: Add default configure file for w90p910 platform
[ARM] 5549/1: Add clock api for w90p910 platform.
[ARM] 5548/1: Add gpio api for w90p910 platform
[ARM] 5551/1: Add multi-function pin api for w90p910 platform.
[ARM] Make ARM_VIC_NR depend on ARM_VIC
[ARM] 5546/1: ARM PL022 SSP/SPI driver v3
ARM: OMAP4: SMP: Update defconfig for OMAP4430
ARM: OMAP4: SMP: Enable SMP support for OMAP4430
...
Diffstat (limited to 'arch')
692 files changed, 55059 insertions, 11335 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d02cdb15b23..29475101a7b3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION config GENERIC_GPIO bool - default n config GENERIC_TIME bool - default n config GENERIC_CLOCKEVENTS bool - default n config GENERIC_CLOCKEVENTS_BROADCAST bool @@ -55,7 +52,6 @@ config MMU config NO_IOPORT bool - default n config EISA bool @@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM config ARCH_HAS_ILOG2_U32 bool - default n config ARCH_HAS_ILOG2_U64 bool - default n config GENERIC_HWEIGHT bool @@ -253,6 +247,14 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. +config ARCH_GEMINI + bool "Cortina Systems Gemini" + select CPU_FA526 + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for the Cortina Systems Gemini family SoCs + config ARCH_EBSA110 bool "EBSA-110" select CPU_SA110 @@ -277,14 +279,6 @@ config ARCH_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. -config ARCH_GEMINI - bool "Cortina Systems Gemini" - select CPU_FA526 - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for the Cortina Systems Gemini family SoCs - config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 @@ -293,6 +287,30 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. +config ARCH_MXC + bool "Freescale MXC/iMX-based" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select ARCH_MTD_XIP + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + help + Support for Freescale MXC/iMX-based family of processors + +config ARCH_STMP3XXX + bool "Freescale STMP3xxx" + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select ARCH_REQUIRE_GPIOLIB + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select USB_ARCH_HAS_EHCI + help + Support for systems based on the Freescale 3xxx CPUs. + config ARCH_NETX bool "Hilscher NetX based" select CPU_ARM926T @@ -309,15 +327,6 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x -config ARCH_IMX - bool "IMX" - select CPU_ARM920T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Motorola's i.MX family of processors (MX1, MXL). - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -398,6 +407,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -405,28 +415,6 @@ config ARCH_KIRKWOOD Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_KS8695 - bool "Micrel/Kendin KS8695" - select CPU_ARM922T - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based - System-on-Chip devices. - -config ARCH_NS9XXX - bool "NetSilicon NS9xxx" - select CPU_ARM926T - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Say Y here if you intend to run this kernel on a NetSilicon NS9xxx - System. - - <http://www.digi.com/products/microprocessors/index.jsp> - config ARCH_LOKI bool "Marvell Loki (88RC8480)" select CPU_FEROCEON @@ -441,6 +429,7 @@ config ARCH_MV78XX0 select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -448,23 +437,13 @@ config ARCH_MV78XX0 Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. -config ARCH_MXC - bool "Freescale MXC/iMX-based" - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select ARCH_MTD_XIP - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - help - Support for Freescale MXC/iMX-based family of processors - config ARCH_ORION5X bool "Marvell Orion" depends on MMU select CPU_FEROCEON select PCI select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION @@ -473,6 +452,52 @@ config ARCH_ORION5X Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), Orion-2 (5281), Orion-1-90 (6183). +config ARCH_MMP + bool "Marvell PXA168/910" + depends on MMU + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select PLAT_PXA + help + Support for Marvell's PXA168/910 processor line. + +config ARCH_KS8695 + bool "Micrel/Kendin KS8695" + select CPU_ARM922T + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based + System-on-Chip devices. + +config ARCH_NS9XXX + bool "NetSilicon NS9xxx" + select CPU_ARM926T + select GENERIC_GPIO + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + help + Say Y here if you intend to run this kernel on a NetSilicon NS9xxx + System. + + <http://www.digi.com/products/microprocessors/index.jsp> + +config ARCH_W90X900 + bool "Nuvoton W90X900 CPU" + select CPU_ARM926T + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO + select COMMON_CLKDEV + help + Support for Nuvoton (Winbond logic dept.) ARM9 processor,You + can login www.mcuos.com or www.nuvoton.com to know more. + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T @@ -495,19 +520,16 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MMP - bool "Marvell PXA168/910" - depends on MMU - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV +config ARCH_MSM + bool "Qualcomm MSM" + select CPU_V6 select GENERIC_TIME select GENERIC_CLOCKEVENTS - select TICK_ONESHOT - select PLAT_PXA help - Support for Marvell's PXA168/910 processor line. + Support for Qualcomm MSM7K based systems. This runs on the ARM11 + apps processor of the MSM7K and depends on a shared memory + interface to the ARM9 modem processor which runs the baseband stack + and controls some vital subsystems (clock and power control, etc). config ARCH_RPC bool "RiscPC" @@ -576,6 +598,20 @@ config ARCH_LH7A40X core with a wide array of integrated devices for hand-held and low-power applications. +config ARCH_U300 + bool "ST-Ericsson U300 Series" + depends on MMU + select CPU_ARM926T + select ARM_AMBA + select ARM_VIC + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_GPIO + help + Support for ST-Ericsson U300 series mobile platforms. + config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926T @@ -587,6 +623,7 @@ config ARCH_DAVINCI select ZONE_DMA select HAVE_IDE select COMMON_CLKDEV + select GENERIC_ALLOCATOR help Support for TI's DaVinci platform. @@ -600,24 +637,6 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_MSM - bool "Qualcomm MSM" - select CPU_V6 - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm MSM7K based systems. This runs on the ARM11 - apps processor of the MSM7K and depends on a shared memory - interface to the ARM9 modem processor which runs the baseband stack - and controls some vital subsystems (clock and power control, etc). - -config ARCH_W90X900 - bool "Nuvoton W90X900 CPU" - select CPU_ARM926T - help - Support for Nuvoton (Winbond logic dept.) ARM9 processor,You - can login www.mcuos.com or www.nuvoton.com to know more. - endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -681,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig" source "arch/arm/mach-s3c6410/Kconfig" endif -source "arch/arm/mach-lh7a40x/Kconfig" +source "arch/arm/plat-stmp3xxx/Kconfig" -source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-h720x/Kconfig" @@ -707,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-msm/Kconfig" +source "arch/arm/mach-u300/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -859,8 +880,11 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) + depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4) + depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -878,6 +902,18 @@ config SMP If you don't know what to do here, say N. +config HAVE_ARM_SCU + bool + depends on SMP + help + This option enables support for the ARM system coherency unit + +config HAVE_ARM_TWD + bool + depends on SMP + help + This options enables support for the ARM timer and watchdog unit + choice prompt "Memory split" default VMSPLIT_3G @@ -916,8 +952,10 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP) + depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ + REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4) default y + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -979,7 +1017,6 @@ config OABI_COMPAT config ARCH_HAS_HOLES_MEMORYMODEL bool - default n # Discontigmem is deprecated config ARCH_DISCONTIGMEM_ENABLE @@ -1022,12 +1059,12 @@ source "mm/Kconfig" config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_EBSA110 || \ - ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_EBSA285 || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ARCH_AT91 || ARCH_DAVINCI || \ - ARCH_KS8695 || MACH_RD88F5182 + ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW help If you say Y here, the LEDs on your machine will be used to provide useful information about your current system status. @@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP correct operation of some network protocols. With an IP-only configuration it is safe to say N, otherwise say Y. +config UACCESS_WITH_MEMCPY + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" + depends on MMU && EXPERIMENTAL + default y if CPU_FEROCEON + help + Implement faster copy_to_user and clear_user methods for CPU + cores where a 8-word STM instruction give significantly higher + memory write throughput than a sequence of individual 32bit stores. + + A possible side effect is a slight increase in scheduling latency + between threads sharing the same address space if they invoke + such copy operations with large buffers. + + However, if the CPU data cache is using a write-allocate mode, + this option is unlikely to provide any performance gain. + endmenu menu "Boot options" @@ -1188,7 +1241,7 @@ endmenu menu "CPU Power Management" -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA) source "drivers/cpufreq/Kconfig" @@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR If in doubt, say Y. -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_IMX && CPU_FREQ - default n - help - This enables the CPUfreq driver for i.MX CPUs. - - If in doubt, say N. +config CPU_FREQ_PXA + bool + depends on CPU_FREQ && ARCH_PXA && PXA25x + default y + select CPU_FREQ_DEFAULT_GOV_USERSPACE endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e84729bf13d4..c877d6df23d1 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -11,6 +11,9 @@ # Copyright (C) 1995-2001 by Russell King LDFLAGS_vmlinux :=-p --no-undefined -X +ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) +LDFLAGS_vmlinux += --be8 +endif CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S GZFLAGS :=-9 @@ -99,64 +102,73 @@ CHECKFLAGS += -D__arm__ #Default value head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o textofs-y := 0x00008000 - - machine-$(CONFIG_ARCH_RPC) := rpc - machine-$(CONFIG_ARCH_EBSA110) := ebsa110 - machine-$(CONFIG_FOOTBRIDGE) := footbridge - machine-$(CONFIG_ARCH_SHARK) := shark - machine-$(CONFIG_ARCH_SA1100) := sa1100 -ifeq ($(CONFIG_ARCH_SA1100),y) +textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory - textofs-$(CONFIG_SA1111) := 0x00208000 +ifeq ($(CONFIG_ARCH_SA1100),y) +textofs-$(CONFIG_SA1111) := 0x00208000 endif - machine-$(CONFIG_ARCH_PXA) := pxa - machine-$(CONFIG_ARCH_MMP) := mmp - plat-$(CONFIG_PLAT_PXA) := pxa - machine-$(CONFIG_ARCH_L7200) := l7200 - machine-$(CONFIG_ARCH_INTEGRATOR) := integrator - machine-$(CONFIG_ARCH_GEMINI) := gemini - textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 - machine-$(CONFIG_ARCH_CLPS711X) := clps711x - machine-$(CONFIG_ARCH_IOP32X) := iop32x - machine-$(CONFIG_ARCH_IOP33X) := iop33x - machine-$(CONFIG_ARCH_IOP13XX) := iop13xx - plat-$(CONFIG_PLAT_IOP) := iop - machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx - machine-$(CONFIG_ARCH_IXP2000) := ixp2000 - machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx - machine-$(CONFIG_ARCH_OMAP1) := omap1 - machine-$(CONFIG_ARCH_OMAP2) := omap2 - machine-$(CONFIG_ARCH_OMAP3) := omap2 - plat-$(CONFIG_ARCH_OMAP) := omap - machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 - machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 - plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c - machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 - plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c - machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x - machine-$(CONFIG_ARCH_VERSATILE) := versatile - machine-$(CONFIG_ARCH_IMX) := imx - machine-$(CONFIG_ARCH_H720X) := h720x - machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 - machine-$(CONFIG_ARCH_REALVIEW) := realview - machine-$(CONFIG_ARCH_AT91) := at91 - machine-$(CONFIG_ARCH_EP93XX) := ep93xx - machine-$(CONFIG_ARCH_PNX4008) := pnx4008 - machine-$(CONFIG_ARCH_NETX) := netx - machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx - machine-$(CONFIG_ARCH_DAVINCI) := davinci - machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood - machine-$(CONFIG_ARCH_KS8695) := ks8695 - plat-$(CONFIG_ARCH_MXC) := mxc - machine-$(CONFIG_ARCH_MX2) := mx2 - machine-$(CONFIG_ARCH_MX3) := mx3 - machine-$(CONFIG_ARCH_MX1) := mx1 - machine-$(CONFIG_ARCH_ORION5X) := orion5x - plat-$(CONFIG_PLAT_ORION) := orion - machine-$(CONFIG_ARCH_MSM) := msm - machine-$(CONFIG_ARCH_LOKI) := loki - machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 - machine-$(CONFIG_ARCH_W90X900) := w90x900 + +# Machine directory name. This list is sorted alphanumerically +# by CONFIG_* macro name. +machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 +machine-$(CONFIG_ARCH_AT91) := at91 +machine-$(CONFIG_ARCH_CLPS711X) := clps711x +machine-$(CONFIG_ARCH_DAVINCI) := davinci +machine-$(CONFIG_ARCH_EBSA110) := ebsa110 +machine-$(CONFIG_ARCH_EP93XX) := ep93xx +machine-$(CONFIG_ARCH_GEMINI) := gemini +machine-$(CONFIG_ARCH_H720X) := h720x +machine-$(CONFIG_ARCH_INTEGRATOR) := integrator +machine-$(CONFIG_ARCH_IOP13XX) := iop13xx +machine-$(CONFIG_ARCH_IOP32X) := iop32x +machine-$(CONFIG_ARCH_IOP33X) := iop33x +machine-$(CONFIG_ARCH_IXP2000) := ixp2000 +machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx +machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx +machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood +machine-$(CONFIG_ARCH_KS8695) := ks8695 +machine-$(CONFIG_ARCH_L7200) := l7200 +machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x +machine-$(CONFIG_ARCH_LOKI) := loki +machine-$(CONFIG_ARCH_MMP) := mmp +machine-$(CONFIG_ARCH_MSM) := msm +machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 +machine-$(CONFIG_ARCH_MX1) := mx1 +machine-$(CONFIG_ARCH_MX2) := mx2 +machine-$(CONFIG_ARCH_MX3) := mx3 +machine-$(CONFIG_ARCH_NETX) := netx +machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx +machine-$(CONFIG_ARCH_OMAP1) := omap1 +machine-$(CONFIG_ARCH_OMAP2) := omap2 +machine-$(CONFIG_ARCH_OMAP3) := omap2 +machine-$(CONFIG_ARCH_OMAP4) := omap2 +machine-$(CONFIG_ARCH_ORION5X) := orion5x +machine-$(CONFIG_ARCH_PNX4008) := pnx4008 +machine-$(CONFIG_ARCH_PXA) := pxa +machine-$(CONFIG_ARCH_REALVIEW) := realview +machine-$(CONFIG_ARCH_RPC) := rpc +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 +machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 +machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 +machine-$(CONFIG_ARCH_SA1100) := sa1100 +machine-$(CONFIG_ARCH_SHARK) := shark +machine-$(CONFIG_ARCH_STMP378X) := stmp378x +machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx +machine-$(CONFIG_ARCH_U300) := u300 +machine-$(CONFIG_ARCH_VERSATILE) := versatile +machine-$(CONFIG_ARCH_W90X900) := w90x900 +machine-$(CONFIG_FOOTBRIDGE) := footbridge + +# Platform directory name. This list is sorted alphanumerically +# by CONFIG_* macro name. +plat-$(CONFIG_ARCH_MXC) := mxc +plat-$(CONFIG_ARCH_OMAP) := omap +plat-$(CONFIG_PLAT_IOP) := iop +plat-$(CONFIG_PLAT_ORION) := orion +plat-$(CONFIG_PLAT_PXA) := pxa +plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c +plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c +plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index fbe5eef1f6c9..ce39dc540085 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -40,7 +40,7 @@ ifeq ($(CONFIG_PXA_SHARPSL),y) OBJS += head-sharpsl.o endif -ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) +ifeq ($(CONFIG_CPU_ENDIAN_BE32),y) ifeq ($(CONFIG_CPU_CP15),y) OBJS += big-endian.o else @@ -78,6 +78,9 @@ EXTRA_AFLAGS := -Wa,-march=all # linker symbols. We only define initrd_phys and params_phys if the # machine class defined the corresponding makefile variable. LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR) +ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) +LDFLAGS_vmlinux += --be8 +endif ifneq ($(INITRD_PHYS),) LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS) endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b371fba1b954..01d49be3b2ca 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -438,6 +438,9 @@ __armv4_mmu_cache_on: mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x0030 +#ifdef CONFIG_CPU_ENDIAN_BE8 + orr r0, r0, #1 << 25 @ big-endian page tables +#endif bl __common_mmu_cache_on mov r0, #0 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs @@ -455,6 +458,9 @@ __armv7_mmu_cache_on: mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer +#ifdef CONFIG_CPU_ENDIAN_BE8 + orr r0, r0, #1 << 25 @ big-endian page tables +#endif orrne r0, r0, #1 @ MMU enabled movne r1, #-1 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index a2cd9beaf37d..4efbb9df0444 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -4,6 +4,14 @@ config ARM_GIC config ARM_VIC bool +config ARM_VIC_NR + int + default 2 + depends on ARM_VIC + help + The maximum number of VICs available in the system, for + power management. + config ICST525 bool @@ -27,10 +35,6 @@ config SHARP_LOCOMO config SHARP_PARAM bool -config SHARPSL_PM - bool - select APM_EMULATION - config SHARP_SCOOP bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 7cb7961d81cb..76be7ff2a7ca 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_TIMER_ACORN) += time-acorn.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o -obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_ARCH_IXP2000) += uengine.o obj-$(CONFIG_ARCH_IXP23XX) += uengine.o diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 5589444ff437..f37afd9422f3 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id, } EXPORT_SYMBOL(clkdev_alloc); +int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, + struct device *dev) +{ + struct clk *r = clk_get(dev, id); + struct clk_lookup *l; + + if (IS_ERR(r)) + return PTR_ERR(r); + + l = clkdev_alloc(r, alias, alias_dev_name); + clk_put(r); + if (!l) + return -ENODEV; + clkdev_add(l); + return 0; +} +EXPORT_SYMBOL(clk_add_alias); + /* * clkdev_drop - remove a clock dynamically allocated */ diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c deleted file mode 100644 index 140f1d721d50..000000000000 --- a/arch/arm/common/sharpsl_pm.c +++ /dev/null @@ -1,859 +0,0 @@ -/* - * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 - * series of PDAs - * - * Copyright (c) 2004-2005 Richard Purdie - * - * Based on code written by Sharp for 2.4 kernels - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/apm_bios.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/leds.h> -#include <linux/apm-emulation.h> -#include <linux/suspend.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/pm.h> -#include <mach/pxa2xx-regs.h> -#include <mach/regs-rtc.h> -#include <mach/sharpsl.h> -#include <asm/hardware/sharpsl_pm.h> - -/* - * Constants - */ -#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ -#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ -#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ -#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ - -#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ -#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ -#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ -#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ -#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ - -/* - * Prototypes - */ -#ifdef CONFIG_PM -static int sharpsl_off_charge_battery(void); -static int sharpsl_check_battery_voltage(void); -static int sharpsl_fatal_check(void); -#endif -static int sharpsl_check_battery_temp(void); -static int sharpsl_ac_check(void); -static int sharpsl_average_value(int ad); -static void sharpsl_average_clear(void); -static void sharpsl_charge_toggle(struct work_struct *private_); -static void sharpsl_battery_thread(struct work_struct *private_); - - -/* - * Variables - */ -struct sharpsl_pm_status sharpsl_pm; -DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle); -DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread); -DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); - - -static int get_percentage(int voltage) -{ - int i = sharpsl_pm.machinfo->bat_levels - 1; - int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0; - struct battery_thresh *thresh; - - if (sharpsl_pm.charge_mode == CHRG_ON) - thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin; - else - thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac; - - while (i > 0 && (voltage > thresh[i].voltage)) - i--; - - return thresh[i].percentage; -} - -static int get_apm_status(int voltage) -{ - int low_thresh, high_thresh; - - if (sharpsl_pm.charge_mode == CHRG_ON) { - high_thresh = sharpsl_pm.machinfo->status_high_acin; - low_thresh = sharpsl_pm.machinfo->status_low_acin; - } else { - high_thresh = sharpsl_pm.machinfo->status_high_noac; - low_thresh = sharpsl_pm.machinfo->status_low_noac; - } - - if (voltage >= high_thresh) - return APM_BATTERY_STATUS_HIGH; - if (voltage >= low_thresh) - return APM_BATTERY_STATUS_LOW; - return APM_BATTERY_STATUS_CRITICAL; -} - -void sharpsl_battery_kick(void) -{ - schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); -} -EXPORT_SYMBOL(sharpsl_battery_kick); - - -static void sharpsl_battery_thread(struct work_struct *private_) -{ - int voltage, percent, apm_status, i = 0; - - if (!sharpsl_pm.machinfo) - return; - - sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE); - - /* Corgi cannot confirm when battery fully charged so periodically kick! */ - if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON) - && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) - schedule_delayed_work(&toggle_charger, 0); - - while(1) { - voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - - if (voltage > 0) break; - if (i++ > 5) { - voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; - dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); - break; - } - } - - voltage = sharpsl_average_value(voltage); - apm_status = get_apm_status(voltage); - percent = get_percentage(voltage); - - /* At low battery voltages, the voltage has a tendency to start - creeping back up so we try to avoid this here */ - if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { - sharpsl_pm.battstat.mainbat_voltage = voltage; - sharpsl_pm.battstat.mainbat_status = apm_status; - sharpsl_pm.battstat.mainbat_percent = percent; - } - - dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage, - sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); - -#ifdef CONFIG_BACKLIGHT_CORGI - /* If battery is low. limit backlight intensity to save power. */ - if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || - (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { - if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { - sharpsl_pm.machinfo->backlight_limit(1); - sharpsl_pm.flags |= SHARPSL_BL_LIMIT; - } - } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { - sharpsl_pm.machinfo->backlight_limit(0); - sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; - } -#endif - - /* Suspend if critical battery level */ - if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) - && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) - && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { - sharpsl_pm.flags |= SHARPSL_APM_QUEUED; - dev_err(sharpsl_pm.dev, "Fatal Off\n"); - apm_queue_event(APM_CRITICAL_SUSPEND); - } - - schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); -} - -void sharpsl_pm_led(int val) -{ - if (val == SHARPSL_LED_ERROR) { - dev_err(sharpsl_pm.dev, "Charging Error!\n"); - } else if (val == SHARPSL_LED_ON) { - dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); - led_trigger_event(sharpsl_charge_led_trigger, LED_FULL); - } else { - dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); - led_trigger_event(sharpsl_charge_led_trigger, LED_OFF); - } -} - -static void sharpsl_charge_on(void) -{ - dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); - - sharpsl_pm.full_count = 0; - sharpsl_pm.charge_mode = CHRG_ON; - schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); - schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); -} - -static void sharpsl_charge_off(void) -{ - dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); - - sharpsl_pm.machinfo->charge(0); - sharpsl_pm_led(SHARPSL_LED_OFF); - sharpsl_pm.charge_mode = CHRG_OFF; - - schedule_delayed_work(&sharpsl_bat, 0); -} - -static void sharpsl_charge_error(void) -{ - sharpsl_pm_led(SHARPSL_LED_ERROR); - sharpsl_pm.machinfo->charge(0); - sharpsl_pm.charge_mode = CHRG_ERROR; -} - -static void sharpsl_charge_toggle(struct work_struct *private_) -{ - dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); - - if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { - sharpsl_charge_off(); - return; - } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { - sharpsl_charge_error(); - return; - } - - sharpsl_pm_led(SHARPSL_LED_ON); - sharpsl_pm.machinfo->charge(0); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - sharpsl_pm.machinfo->charge(1); - - sharpsl_pm.charge_start_time = jiffies; -} - -static void sharpsl_ac_timer(unsigned long data) -{ - int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); - - dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); - - sharpsl_average_clear(); - if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) - sharpsl_charge_on(); - else if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_charge_off(); - - schedule_delayed_work(&sharpsl_bat, 0); -} - - -irqreturn_t sharpsl_ac_isr(int irq, void *dev_id) -{ - /* Delay the event slightly to debounce */ - /* Must be a smaller delay than the chrg_full_isr below */ - mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); - - return IRQ_HANDLED; -} - -static void sharpsl_chrg_full_timer(unsigned long data) -{ - dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); - - sharpsl_pm.full_count++; - - if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { - dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); - if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_charge_off(); - } else if (sharpsl_pm.full_count < 2) { - dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); - schedule_delayed_work(&toggle_charger, 0); - } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { - dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); - schedule_delayed_work(&toggle_charger, 0); - } else { - sharpsl_charge_off(); - sharpsl_pm.charge_mode = CHRG_DONE; - dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); - } -} - -/* Charging Finished Interrupt (Not present on Corgi) */ -/* Can trigger at the same time as an AC status change so - delay until after that has been processed */ -irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id) -{ - if (sharpsl_pm.flags & SHARPSL_SUSPENDED) - return IRQ_HANDLED; - - /* delay until after any ac interrupt */ - mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); - - return IRQ_HANDLED; -} - -irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id) -{ - int is_fatal = 0; - - if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) { - dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); - is_fatal = 1; - } - - if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) { - dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); - is_fatal = 1; - } - - if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { - sharpsl_pm.flags |= SHARPSL_APM_QUEUED; - apm_queue_event(APM_CRITICAL_SUSPEND); - } - - return IRQ_HANDLED; -} - -/* - * Maintain an average of the last 10 readings - */ -#define SHARPSL_CNV_VALUE_NUM 10 -static int sharpsl_ad_index; - -static void sharpsl_average_clear(void) -{ - sharpsl_ad_index = 0; -} - -static int sharpsl_average_value(int ad) -{ - int i, ad_val = 0; - static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; - - if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { - sharpsl_ad_index = 0; - return ad; - } - - sharpsl_ad[sharpsl_ad_index] = ad; - sharpsl_ad_index++; - if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { - for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) - sharpsl_ad[i] = sharpsl_ad[i+1]; - sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; - } - for (i=0; i < sharpsl_ad_index; i++) - ad_val += sharpsl_ad[i]; - - return (ad_val / sharpsl_ad_index); -} - -/* - * Take an array of 5 integers, remove the maximum and minimum values - * and return the average. - */ -static int get_select_val(int *val) -{ - int i, j, k, temp, sum = 0; - - /* Find MAX val */ - temp = val[0]; - j=0; - for (i=1; i<5; i++) { - if (temp < val[i]) { - temp = val[i]; - j = i; - } - } - - /* Find MIN val */ - temp = val[4]; - k=4; - for (i=3; i>=0; i--) { - if (temp > val[i]) { - temp = val[i]; - k = i; - } - } - - for (i=0; i<5; i++) - if (i != j && i != k ) - sum += val[i]; - - dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); - - return (sum/3); -} - -static int sharpsl_check_battery_temp(void) -{ - int val, i, buff[5]; - - /* Check battery temperature */ - for (i=0; i<5; i++) { - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); - sharpsl_pm.machinfo->measure_temp(1); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP); - sharpsl_pm.machinfo->measure_temp(0); - } - - val = get_select_val(buff); - - dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); - if (val > sharpsl_pm.machinfo->charge_on_temp) { - printk(KERN_WARNING "Not charging: temperature out of limits.\n"); - return -1; - } - - return 0; -} - -#ifdef CONFIG_PM -static int sharpsl_check_battery_voltage(void) -{ - int val, i, buff[5]; - - /* disable charge, enable discharge */ - sharpsl_pm.machinfo->charge(0); - sharpsl_pm.machinfo->discharge(1); - mdelay(SHARPSL_WAIT_DISCHARGE_ON); - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(1); - - /* Check battery voltage */ - for (i=0; i<5; i++) { - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(0); - - sharpsl_pm.machinfo->discharge(0); - - val = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); - - if (val < sharpsl_pm.machinfo->charge_on_volt) - return -1; - - return 0; -} -#endif - -static int sharpsl_ac_check(void) -{ - int temp, i, buff[5]; - - for (i=0; i<5; i++) { - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); - } - - temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); - - if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) { - dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); - return -1; - } - - return 0; -} - -#ifdef CONFIG_PM -static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) -{ - sharpsl_pm.flags |= SHARPSL_SUSPENDED; - flush_scheduled_work(); - - if (sharpsl_pm.charge_mode == CHRG_ON) - sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; - else - sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; - - return 0; -} - -static int sharpsl_pm_resume(struct platform_device *pdev) -{ - /* Clear the reset source indicators as they break the bootloader upon reboot */ - RCSR = 0x0f; - sharpsl_average_clear(); - sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; - sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; - - return 0; -} - -static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) -{ - dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); - - dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); - /* not charging and AC-IN! */ - - if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) { - dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); - sharpsl_pm.charge_mode = CHRG_OFF; - sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; - sharpsl_off_charge_battery(); - } - - sharpsl_pm.machinfo->presuspend(); - - PEDR = 0xffffffff; /* clear it */ - - sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; - if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { - RTSR &= RTSR_ALE; - RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; - dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); - sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; - } else if (alarm_enable) { - RTSR &= RTSR_ALE; - RTAR = alarm_time; - dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); - } else { - dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); - } - - pxa_pm_enter(state); - - sharpsl_pm.machinfo->postsuspend(); - - dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); -} - -static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) -{ - if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) - { - if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { - dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - if(sharpsl_off_charge_battery()) { - dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); - } - - if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) ) - { - dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); - corgi_goto_sleep(alarm_time, alarm_enable, state); - return 1; - } - - return 0; -} - -static int corgi_pxa_pm_enter(suspend_state_t state) -{ - unsigned long alarm_time = RTAR; - unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); - - dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); - - corgi_goto_sleep(alarm_time, alarm_status, state); - - while (corgi_enter_suspend(alarm_time,alarm_status,state)) - {} - - if (sharpsl_pm.machinfo->earlyresume) - sharpsl_pm.machinfo->earlyresume(); - - dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); - - return 0; -} - -/* - * Check for fatal battery errors - * Fatal returns -1 - */ -static int sharpsl_fatal_check(void) -{ - int buff[5], temp, i, acin; - - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); - - /* Check AC-Adapter */ - acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - sharpsl_pm.machinfo->charge(0); - udelay(100); - sharpsl_pm.machinfo->discharge(1); /* enable discharge */ - mdelay(SHARPSL_WAIT_DISCHARGE_ON); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(1); - - /* Check battery : check inserting battery ? */ - for (i=0; i<5; i++) { - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(0); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - udelay(100); - sharpsl_pm.machinfo->charge(1); - sharpsl_pm.machinfo->discharge(0); - } - - temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); - - if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || - (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) - return -1; - return 0; -} - -static int sharpsl_off_charge_error(void) -{ - dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n"); - sharpsl_pm.machinfo->charge(0); - sharpsl_pm_led(SHARPSL_LED_ERROR); - sharpsl_pm.charge_mode = CHRG_ERROR; - return 1; -} - -/* - * Charging Control while suspended - * Return 1 - go straight to sleep - * Return 0 - sleep or wakeup depending on other factors - */ -static int sharpsl_off_charge_battery(void) -{ - int time; - - dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); - - if (sharpsl_pm.charge_mode == CHRG_OFF) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); - - /* AC Check */ - if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) - return sharpsl_off_charge_error(); - - /* Start Charging */ - sharpsl_pm_led(SHARPSL_LED_ON); - sharpsl_pm.machinfo->charge(0); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - sharpsl_pm.machinfo->charge(1); - - sharpsl_pm.charge_mode = CHRG_ON; - sharpsl_pm.full_count = 0; - - return 1; - } else if (sharpsl_pm.charge_mode != CHRG_ON) { - return 1; - } - - if (sharpsl_pm.full_count == 0) { - int time; - - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); - - if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) - return sharpsl_off_charge_error(); - - sharpsl_pm.machinfo->charge(0); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - sharpsl_pm.machinfo->charge(1); - sharpsl_pm.charge_mode = CHRG_ON; - - mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); - - time = RCNR; - while(1) { - /* Check if any wakeup event had occurred */ - if (sharpsl_pm.machinfo->charger_wakeup() != 0) - return 0; - /* Check for timeout */ - if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) - return 1; - if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n"); - sharpsl_pm.full_count++; - sharpsl_pm.machinfo->charge(0); - mdelay(SHARPSL_CHARGE_WAIT_TIME); - sharpsl_pm.machinfo->charge(1); - return 1; - } - } - } - - dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); - - mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); - - time = RCNR; - while(1) { - /* Check if any wakeup event had occurred */ - if (sharpsl_pm.machinfo->charger_wakeup() != 0) - return 0; - /* Check for timeout */ - if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { - if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); - sharpsl_pm.full_count = 0; - } - sharpsl_pm.full_count++; - return 1; - } - if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); - sharpsl_pm_led(SHARPSL_LED_OFF); - sharpsl_pm.machinfo->charge(0); - sharpsl_pm.charge_mode = CHRG_DONE; - return 1; - } - } -} -#else -#define sharpsl_pm_suspend NULL -#define sharpsl_pm_resume NULL -#endif - -static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); -} - -static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); -} - -static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); -static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); - -extern void (*apm_get_power_status)(struct apm_power_info *); - -static void sharpsl_apm_get_power_status(struct apm_power_info *info) -{ - info->ac_line_status = sharpsl_pm.battstat.ac_status; - - if (sharpsl_pm.charge_mode == CHRG_ON) - info->battery_status = APM_BATTERY_STATUS_CHARGING; - else - info->battery_status = sharpsl_pm.battstat.mainbat_status; - - info->battery_flag = (1 << info->battery_status); - info->battery_life = sharpsl_pm.battstat.mainbat_percent; -} - -#ifdef CONFIG_PM -static struct platform_suspend_ops sharpsl_pm_ops = { - .enter = corgi_pxa_pm_enter, - .valid = suspend_valid_only_mem, -}; -#endif - -static int __init sharpsl_pm_probe(struct platform_device *pdev) -{ - int ret; - - if (!pdev->dev.platform_data) - return -EINVAL; - - sharpsl_pm.dev = &pdev->dev; - sharpsl_pm.machinfo = pdev->dev.platform_data; - sharpsl_pm.charge_mode = CHRG_OFF; - sharpsl_pm.flags = 0; - - init_timer(&sharpsl_pm.ac_timer); - sharpsl_pm.ac_timer.function = sharpsl_ac_timer; - - init_timer(&sharpsl_pm.chrg_full_timer); - sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; - - led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger); - - sharpsl_pm.machinfo->init(); - - ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage); - ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage); - if (ret != 0) - dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret); - - apm_get_power_status = sharpsl_apm_get_power_status; - -#ifdef CONFIG_PM - suspend_set_ops(&sharpsl_pm_ops); -#endif - - mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); - - return 0; -} - -static int sharpsl_pm_remove(struct platform_device *pdev) -{ - suspend_set_ops(NULL); - - device_remove_file(&pdev->dev, &dev_attr_battery_percentage); - device_remove_file(&pdev->dev, &dev_attr_battery_voltage); - - led_trigger_unregister_simple(sharpsl_charge_led_trigger); - - sharpsl_pm.machinfo->exit(); - - del_timer_sync(&sharpsl_pm.chrg_full_timer); - del_timer_sync(&sharpsl_pm.ac_timer); - - return 0; -} - -static struct platform_driver sharpsl_pm_driver = { - .probe = sharpsl_pm_probe, - .remove = sharpsl_pm_remove, - .suspend = sharpsl_pm_suspend, - .resume = sharpsl_pm_resume, - .driver = { - .name = "sharpsl-pm", - }, -}; - -static int __devinit sharpsl_pm_init(void) -{ - return platform_driver_register(&sharpsl_pm_driver); -} - -static void sharpsl_pm_exit(void) -{ - platform_driver_unregister(&sharpsl_pm_driver); -} - -late_initcall(sharpsl_pm_init); -module_exit(sharpsl_pm_exit); diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index b2a781d9ce05..887c6eb3a18a 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/sysdev.h> #include <asm/mach/irq.h> #include <asm/hardware/vic.h> @@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq) writel(1 << irq, base + VIC_INT_ENABLE); } +/** + * vic_init2 - common initialisation code + * @base: Base of the VIC. + * + * Common initialisation code for registeration + * and resume. +*/ +static void vic_init2(void __iomem *base) +{ + int i; + + for (i = 0; i < 16; i++) { + void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); + writel(VIC_VECT_CNTL_ENABLE | i, reg); + } + + writel(32, base + VIC_PL190_DEF_VECT_ADDR); +} + +#if defined(CONFIG_PM) +/** + * struct vic_device - VIC PM device + * @sysdev: The system device which is registered. + * @irq: The IRQ number for the base of the VIC. + * @base: The register base for the VIC. + * @resume_sources: A bitmask of interrupts for resume. + * @resume_irqs: The IRQs enabled for resume. + * @int_select: Save for VIC_INT_SELECT. + * @int_enable: Save for VIC_INT_ENABLE. + * @soft_int: Save for VIC_INT_SOFT. + * @protect: Save for VIC_PROTECT. + */ +struct vic_device { + struct sys_device sysdev; + + void __iomem *base; + int irq; + u32 resume_sources; + u32 resume_irqs; + u32 int_select; + u32 int_enable; + u32 soft_int; + u32 protect; +}; + +/* we cannot allocate memory when VICs are initially registered */ +static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; + +static inline struct vic_device *to_vic(struct sys_device *sys) +{ + return container_of(sys, struct vic_device, sysdev); +} + +static int vic_id; + +static int vic_class_resume(struct sys_device *dev) +{ + struct vic_device *vic = to_vic(dev); + void __iomem *base = vic->base; + + printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); + + /* re-initialise static settings */ + vic_init2(base); + + writel(vic->int_select, base + VIC_INT_SELECT); + writel(vic->protect, base + VIC_PROTECT); + + /* set the enabled ints and then clear the non-enabled */ + writel(vic->int_enable, base + VIC_INT_ENABLE); + writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR); + + /* and the same for the soft-int register */ + + writel(vic->soft_int, base + VIC_INT_SOFT); + writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); + + return 0; +} + +static int vic_class_suspend(struct sys_device *dev, pm_message_t state) +{ + struct vic_device *vic = to_vic(dev); + void __iomem *base = vic->base; + + printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); + + vic->int_select = readl(base + VIC_INT_SELECT); + vic->int_enable = readl(base + VIC_INT_ENABLE); + vic->soft_int = readl(base + VIC_INT_SOFT); + vic->protect = readl(base + VIC_PROTECT); + + /* set the interrupts (if any) that are used for + * resuming the system */ + + writel(vic->resume_irqs, base + VIC_INT_ENABLE); + writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); + + return 0; +} + +struct sysdev_class vic_class = { + .name = "vic", + .suspend = vic_class_suspend, + .resume = vic_class_resume, +}; + +/** + * vic_pm_register - Register a VIC for later power management control + * @base: The base address of the VIC. + * @irq: The base IRQ for the VIC. + * @resume_sources: bitmask of interrupts allowed for resume sources. + * + * Register the VIC with the system device tree so that it can be notified + * of suspend and resume requests and ensure that the correct actions are + * taken to re-instate the settings on resume. + */ +static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources) +{ + struct vic_device *v; + + if (vic_id >= ARRAY_SIZE(vic_devices)) + printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); + else { + v = &vic_devices[vic_id]; + v->base = base; + v->resume_sources = resume_sources; + v->irq = irq; + vic_id++; + } +} + +/** + * vic_pm_init - initicall to register VIC pm + * + * This is called via late_initcall() to register + * the resources for the VICs due to the early + * nature of the VIC's registration. +*/ +static int __init vic_pm_init(void) +{ + struct vic_device *dev = vic_devices; + int err; + int id; + + if (vic_id == 0) + return 0; + + err = sysdev_class_register(&vic_class); + if (err) { + printk(KERN_ERR "%s: cannot register class\n", __func__); + return err; + } + + for (id = 0; id < vic_id; id++, dev++) { + dev->sysdev.id = id; + dev->sysdev.cls = &vic_class; + + err = sysdev_register(&dev->sysdev); + if (err) { + printk(KERN_ERR "%s: failed to register device\n", + __func__); + return err; + } + } + + return 0; +} + +late_initcall(vic_pm_init); + +static struct vic_device *vic_from_irq(unsigned int irq) +{ + struct vic_device *v = vic_devices; + unsigned int base_irq = irq & ~31; + int id; + + for (id = 0; id < vic_id; id++, v++) { + if (v->irq == base_irq) + return v; + } + + return NULL; +} + +static int vic_set_wake(unsigned int irq, unsigned int on) +{ + struct vic_device *v = vic_from_irq(irq); + unsigned int off = irq & 31; + + if (!v) + return -EINVAL; + + if (on) + v->resume_irqs |= 1 << off; + else + v->resume_irqs &= ~(1 << off); + + return 0; +} + +#else +static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { } + +#define vic_set_wake NULL +#endif /* CONFIG_PM */ + static struct irq_chip vic_chip = { .name = "VIC", .ack = vic_mask_irq, .mask = vic_mask_irq, .unmask = vic_unmask_irq, + .set_wake = vic_set_wake, }; /** @@ -51,9 +260,10 @@ static struct irq_chip vic_chip = { * @base: iomem base address * @irq_start: starting interrupt number, must be muliple of 32 * @vic_sources: bitmask of interrupt sources to allow + * @resume_sources: bitmask of interrupt sources to allow for resume */ void __init vic_init(void __iomem *base, unsigned int irq_start, - u32 vic_sources) + u32 vic_sources, u32 resume_sources) { unsigned int i; @@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, writel(value, base + VIC_PL190_VECT_ADDR); } - for (i = 0; i < 16; i++) { - void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); - writel(VIC_VECT_CNTL_ENABLE | i, reg); - } - - writel(32, base + VIC_PL190_DEF_VECT_ADDR); + vic_init2(base); for (i = 0; i < 32; i++) { if (vic_sources & (1 << i)) { @@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } + + vic_pm_register(base, irq_start, resume_sources); } diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 227da0843ead..d18d21bb41e4 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc3 -# Tue Aug 19 11:26:54 2008 +# Linux kernel version: 2.6.30-rc8 +# Thu Jun 4 09:53:21 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 @@ -44,15 +42,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -61,31 +68,37 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -93,19 +106,13 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -113,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -133,7 +137,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -143,10 +147,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -167,14 +171,17 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Intel PXA2xx/PXA3xx Implementations @@ -187,16 +194,24 @@ CONFIG_CPU_PXA300=y # CONFIG_CPU_PXA310 is not set # CONFIG_CPU_PXA320 is not set # CONFIG_CPU_PXA930 is not set +# CONFIG_CPU_PXA935 is not set # CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_VIPER is not set # CONFIG_ARCH_PXA_ESERIES is not set -# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set # CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set # CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_COLIBRI300 is not set +# CONFIG_MACH_COLIBRI320 is not set # CONFIG_MACH_ZYLONITE is not set # CONFIG_MACH_LITTLETON is not set # CONFIG_MACH_TAVOREVB is not set @@ -204,19 +219,15 @@ CONFIG_CPU_PXA300=y # CONFIG_MACH_ARMCORE is not set CONFIG_MACH_CM_X300=y # CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_MIOA701 is not set # CONFIG_MACH_PCM027 is not set # CONFIG_ARCH_PXA_PALM is not set +# CONFIG_MACH_CSB726 is not set # CONFIG_PXA_EZX is not set CONFIG_PXA3xx=y # CONFIG_PXA_PWM is not set - -# -# Boot options -# - -# -# Power management -# +CONFIG_PLAT_PXA=y # # Processor Type @@ -241,6 +252,7 @@ CONFIG_IO_36=y CONFIG_OUTER_CACHE=y CONFIG_CACHE_XSC3L2=y CONFIG_IWMMXT=y +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -256,25 +268,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -287,7 +307,7 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400" # CONFIG_KEXEC is not set # -# CPU Frequency scaling +# CPU Power Management # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y @@ -304,6 +324,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -320,6 +341,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -376,6 +399,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -385,7 +409,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -407,8 +433,7 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set # CONFIG_BT_HCIBCM203X is not set @@ -416,19 +441,15 @@ CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +# CONFIG_LIB80211_DEBUG is not set # CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -453,6 +474,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set @@ -494,7 +516,6 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_SHARP_SL is not set # CONFIG_MTD_PLATRAM is not set # @@ -516,16 +537,23 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_SHARPSL is not set CONFIG_MTD_NAND_PXA3xx=y +# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -585,11 +613,15 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -604,11 +636,17 @@ CONFIG_MII=y CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=0 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -624,10 +662,13 @@ CONFIG_LIBERTAS_SDIO=m # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_HOSTAP is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -677,18 +718,21 @@ CONFIG_KEYBOARD_PXA27x=m # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -721,10 +765,10 @@ CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set @@ -763,12 +807,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -782,6 +822,10 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -798,12 +842,14 @@ CONFIG_GPIO_PCA953X=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -811,12 +857,19 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -842,6 +895,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -862,12 +916,15 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set # CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set # CONFIG_FB_W100 is not set -# CONFIG_FB_AM200EPD is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -899,9 +956,11 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set @@ -916,12 +975,15 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_LIB=m # CONFIG_SND_PXA2XX_AC97 is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=m CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -932,9 +994,39 @@ CONFIG_HID_DEBUG=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -952,11 +1044,14 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -965,6 +1060,7 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # @@ -973,20 +1069,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -994,7 +1090,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1015,6 +1110,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1022,7 +1118,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1031,13 +1126,20 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y @@ -1045,10 +1147,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_PXA=m # CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1057,7 +1161,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1065,7 +1172,13 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1096,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1105,28 +1219,27 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +CONFIG_RTC_DRV_V3020=y # # on-CPU RTC drivers # CONFIG_RTC_DRV_SA1100=y +# CONFIG_RTC_DRV_PXA is not set # CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1135,15 +1248,18 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1153,6 +1269,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1173,15 +1294,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1201,6 +1320,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1209,6 +1329,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1313,6 +1434,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1329,6 +1451,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set @@ -1336,22 +1459,38 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1363,17 +1502,28 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1442,15 +1592,21 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1460,7 +1616,10 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index eb2738b5be5f..ac18662f38cc 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Wed Apr 15 08:16:53 2009 +# Linux kernel version: 2.6.30-rc7 +# Tue May 26 07:24:28 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_MSM is not set # CONFIG_ARCH_W90X900 is not set +CONFIG_AINTC=y # # TI DaVinci Implementations @@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y # DaVinci Core Type # CONFIG_ARCH_DAVINCI_DM644x=y +CONFIG_ARCH_DAVINCI_DM355=y +CONFIG_ARCH_DAVINCI_DM646x=y # # DaVinci Board Type # CONFIG_MACH_DAVINCI_EVM=y +CONFIG_MACH_SFFSDR=y +CONFIG_MACH_DAVINCI_DM355_EVM=y +CONFIG_MACH_DM355_LEOPARD=y +CONFIG_MACH_DAVINCI_DM6467_EVM=y CONFIG_DAVINCI_MUX=y CONFIG_DAVINCI_MUX_DEBUG=y CONFIG_DAVINCI_MUX_WARNINGS=y @@ -245,7 +252,7 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set +CONFIG_TI_DAVINCI_EMAC=y +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set @@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set +# CONFIG_MFD_DM355EVM_MSP is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set @@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_DAVINCI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y @@ -1778,6 +1790,7 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 3f89d5f25bce..3fb083b81b0a 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -1,12 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc1 -# Sat Dec 16 06:05:24 2006 +# Linux kernel version: 2.6.30-rc3 +# Tue May 19 12:26:49 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -15,42 +22,54 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -58,31 +77,38 @@ CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,6 +122,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_FREEZER is not set # # System Type @@ -105,29 +132,40 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set CONFIG_ARCH_EP93XX=y # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # @@ -138,14 +176,24 @@ CONFIG_CRUNCH=y # # EP93xx Platforms # +# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set +CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y CONFIG_MACH_ADSSPHERE=y +CONFIG_MACH_EDB93XX=y +CONFIG_MACH_EDB9301=y CONFIG_MACH_EDB9302=y -CONFIG_MACH_EDB9302A=y +CONFIG_MACH_EDB9307=y CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y -CONFIG_MACH_EDB9315A=y CONFIG_MACH_GESBC9312=y +CONFIG_MACH_MICRO9=y +CONFIG_MACH_MICRO9H=y +CONFIG_MACH_MICRO9M=y +CONFIG_MACH_MICRO9L=y CONFIG_MACH_TS72XX=y +CONFIG_EP93XX_EARLY_UART1=y +# CONFIG_EP93XX_EARLY_UART2 is not set +# CONFIG_EP93XX_EARLY_UART3 is not set # # Processor Type @@ -154,6 +202,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y @@ -168,34 +217,47 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_COMMON_CLKDEV=y # # Bus support # CONFIG_ARM_AMBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=100 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -205,6 +267,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -221,32 +289,31 @@ CONFIG_FPE_NWFPE_XP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set - -# -# Networking -# +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -267,6 +334,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -276,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set @@ -289,25 +358,15 @@ CONFIG_IPV6=y # CONFIG_IPV6_SIT is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -317,20 +376,28 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -339,41 +406,39 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -404,16 +469,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -431,49 +493,58 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_TS7250=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_TS7250 is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support +# LPDDR flash memory drivers # +# CONFIG_MTD_LPDDR is not set # -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set @@ -495,6 +566,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -502,92 +574,71 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_EP93XX_ETH=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -605,6 +656,7 @@ CONFIG_EP93XX_ETH=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -621,104 +673,101 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_EP93XX_WATCHDOG=y - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# TPM devices +# I2C Hardware Bus support # -# CONFIG_TCG_TPM is not set # -# I2C support +# I2C system bus drivers (mostly embedded / system-on-chip) # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set # -# I2C Algorithms +# External I2C/SMBus adapter drivers # -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # -# I2C Hardware Bus support +# Other I2C/SMBus bus drivers # -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_EEPROM_LEGACY=y +# CONFIG_DS1682 is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# SPI support +# Memory mapped GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# I2C GPIO expanders: # -# CONFIG_W1 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # -# Hardware Monitoring support +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -732,158 +781,188 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_EP93XX_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# LED drivers +# Sonics Silicon Backplane # +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# - -# -# USB HID Boot Protocol drivers -# - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -CONFIG_USB_RTL8150=y -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -895,6 +974,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -902,16 +982,23 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -920,38 +1007,34 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -965,24 +1048,55 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_RTC_DRV_EP93XX=y +# CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -991,27 +1105,31 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1032,16 +1150,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1049,33 +1164,35 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -1087,7 +1204,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1109,10 +1225,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1153,49 +1266,83 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1204,21 +1351,115 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index dcf8153a947d..0a1abb978d7e 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y CONFIG_MACH_DB88F6281_BP=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y +CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_TS219=y CONFIG_PLAT_ORION=y @@ -270,7 +271,9 @@ CONFIG_CMDLINE="" # # CPU Power Management # -# CONFIG_CPU_IDLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Floating point emulation diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index f56837f69ca7..957fd5fa27ca 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y # CONFIG_MACH_SAAR is not set # CONFIG_MACH_ARMCORE is not set # CONFIG_MACH_CM_X300 is not set +CONFIG_MACH_H4700=y CONFIG_MACH_MAGICIAN=y # CONFIG_MACH_MIOA701 is not set # CONFIG_MACH_PCM027 is not set @@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set +CONFIG_MFD_ASIC3=y CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=y # CONFIG_TPS65010 is not set @@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y # CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set -# CONFIG_FB_W100 is not set +CONFIG_FB_W100=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig new file mode 100644 index 000000000000..4b04290d8e81 --- /dev/null +++ b/arch/arm/configs/mx21_defconfig @@ -0,0 +1,1170 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc1 +# Tue Apr 14 16:58:09 2009 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set +CONFIG_MACH_MX21=y +# CONFIG_MACH_MX27 is not set + +# +# MX2 platforms: +# +CONFIG_MACH_MX21ADS=y +# CONFIG_MXC_IRQ_PRIOR is not set +CONFIG_MXC_PWM=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_CONSOLE_TRANSLATIONS is not set +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_IMX=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig new file mode 100644 index 000000000000..28be17fbc157 --- /dev/null +++ b/arch/arm/configs/omap3_evm_defconfig @@ -0,0 +1,1528 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc5 +# Mon May 18 14:01:52 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +CONFIG_MACH_OMAP3EVM=y +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_OMAP_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +CONFIG_SMC911X=y +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=m +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig new file mode 100644 index 000000000000..23e43ea4efa1 --- /dev/null +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -0,0 +1,866 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc7 +# Tue Jun 9 12:36:23 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set +CONFIG_ARCH_OMAP4=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_4430SDP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_DCACHE_DISABLE=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_ARM_GIC=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_NR_CPUS=2 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_LOCAL_TIMERS=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set +CONFIG_HAVE_MLOCK=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig new file mode 100644 index 000000000000..213fe9c5eaae --- /dev/null +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -0,0 +1,1211 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc5 +# Fri Oct 10 11:49:41 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +CONFIG_MACH_OMAP_ZOOM2=y +# CONFIG_MACH_OVERO is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 5b98f7645119..9e2385293ecb 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_TIMERIOMEM=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 593102da8cd7..eb2cb31825c0 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5" +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig new file mode 100644 index 000000000000..44461f197a17 --- /dev/null +++ b/arch/arm/configs/stmp378x_defconfig @@ -0,0 +1,1141 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 23 02:44:13 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-default" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set +# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_STMP3XXX=y + +# +# Freescale STMP3xxx implementations +# +# CONFIG_ARCH_STMP37XX is not set +CONFIG_ARCH_STMP378X=y +# CONFIG_MACH_STMP37XX is not set +CONFIG_MACH_STMP378X=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set +# CONFIG_MTD_TESTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=6144 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# + +# +# RDS decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# + +# +# Video improvement chips +# +# CONFIG_VIDEO_VIVI is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_SELFTEST=y +CONFIG_DEBUG_OBJECTS_FREE=y +CONFIG_DEBUG_OBJECTS_TIMERS=y +CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SLAB_LEAK=y +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_TRACE_IRQFLAGS=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +CONFIG_DEBUG_KOBJECT=y +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_EVENT_TRACER is not set +CONFIG_BOOT_TRACER=y +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_STACK_TRACER=y +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig new file mode 100644 index 000000000000..401279d531d5 --- /dev/null +++ b/arch/arm/configs/stmp37xx_defconfig @@ -0,0 +1,1002 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29.1 +# Mon Apr 20 04:41:26 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-default" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_STMP3XXX=y + +# +# Freescale STMP3xxx implementations +# +CONFIG_ARCH_STMP37XX=y +# CONFIG_ARCH_STMP378X is not set +CONFIG_MACH_STMP37XX=y +# CONFIG_MACH_STMP378X is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=6144 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_STMP_DBG is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# + +# +# Video improvement chips +# +# CONFIG_VIDEO_VIVI is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_BOOT_TRACER=y +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_STACK_TRACER=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig new file mode 100644 index 000000000000..2d827e121147 --- /dev/null +++ b/arch/arm/configs/u300_defconfig @@ -0,0 +1,1115 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc6 +# Mon Jun 1 09:18:22 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_U300=y +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# ST-Ericsson AB U300/U330/U335/U365 Platform +# + +# +# ST-Ericsson Mobile Platform Products +# +CONFIG_MACH_U300=y + +# +# ST-Ericsson U300/U330/U335/U365 Feature Selections +# +# CONFIG_MACH_U300_BS2X is not set +# CONFIG_MACH_U300_BS330 is not set +CONFIG_MACH_U300_BS335=y +# CONFIG_MACH_U300_BS365 is not set +# CONFIG_MACH_U300_SINGLE_RAM is not set +CONFIG_MACH_U300_DUAL_RAM=y +CONFIG_U300_DEBUG=y +# CONFIG_MACH_U300_SEMI_IS_SHARED is not set + +# +# All the settings below must match the bootloader's settings +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_VIC=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_ARMMMCI=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PL030 is not set +# CONFIG_RTC_DRV_PL031 is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/w90p910_defconfig index 56bda7c6d670..5245655a0ad3 100644 --- a/arch/arm/configs/w90p910_defconfig +++ b/arch/arm/configs/w90p910_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc8-git8 -# Sat Nov 15 10:05:00 2008 +# Linux kernel version: 2.6.30 +# Wed Jun 10 22:09:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -42,10 +40,19 @@ CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y @@ -56,52 +63,53 @@ CONFIG_USER_NS=y # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set +# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_LSF=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -151,23 +159,17 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set CONFIG_ARCH_W90X900=y - -# -# Boot options -# - -# -# Power management -# CONFIG_CPU_W90P910=y # @@ -198,6 +200,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set # CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -209,27 +212,32 @@ CONFIG_ARM_THUMB=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -237,12 +245,17 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 initrd=0xa00000,4000000 mem=64M" +CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -258,6 +271,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -282,11 +297,93 @@ CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 @@ -300,9 +397,41 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set @@ -354,38 +483,57 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # -CONFIG_SERIAL_W90X900=y -# CONFIG_SERIAL_W90X900_PORT1 is not set -# CONFIG_SERIAL_W90X900_PORT2 is not set -# CONFIG_SERIAL_W90X900_PORT3 is not set -# CONFIG_SERIAL_W90X900_PORT4 is not set -CONFIG_SERIAL_W90X900_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -393,10 +541,11 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set # # Multimedia devices @@ -433,33 +582,131 @@ CONFIG_SSB_POSSIBLE=y CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -469,6 +716,11 @@ CONFIG_FS_POSIX_ACL=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -486,15 +738,13 @@ CONFIG_GENERIC_ACL=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -502,15 +752,22 @@ CONFIG_TMPFS_POSIX_ACL=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # # Partition Types @@ -586,18 +843,36 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -605,14 +880,15 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -620,7 +896,10 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 7b9d27e749b8..b3e656c6fb78 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -8,6 +8,21 @@ #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 +#define CPUID_EXT_PFR0 "c1, 0" +#define CPUID_EXT_PFR1 "c1, 1" +#define CPUID_EXT_DFR0 "c1, 2" +#define CPUID_EXT_AFR0 "c1, 3" +#define CPUID_EXT_MMFR0 "c1, 4" +#define CPUID_EXT_MMFR1 "c1, 5" +#define CPUID_EXT_MMFR2 "c1, 6" +#define CPUID_EXT_MMFR3 "c1, 7" +#define CPUID_EXT_ISAR0 "c2, 0" +#define CPUID_EXT_ISAR1 "c2, 1" +#define CPUID_EXT_ISAR2 "c2, 2" +#define CPUID_EXT_ISAR3 "c2, 3" +#define CPUID_EXT_ISAR4 "c2, 4" +#define CPUID_EXT_ISAR5 "c2, 5" + #ifdef CONFIG_CPU_CP15 #define read_cpuid(reg) \ ({ \ @@ -18,9 +33,19 @@ : "cc"); \ __val; \ }) +#define read_cpuid_ext(ext_reg) \ + ({ \ + unsigned int __val; \ + asm("mrc p15, 0, %0, c0, " ext_reg \ + : "=r" (__val) \ + : \ + : "cc"); \ + __val; \ + }) #else extern unsigned int processor_id; #define read_cpuid(reg) (processor_id) +#define read_cpuid_ext(reg) 0 #endif /* diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h deleted file mode 100644 index e521b70713c8..000000000000 --- a/arch/arm/include/asm/hardware/arm_twd.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_HARDWARE_TWD_H -#define __ASM_HARDWARE_TWD_H - -#define TWD_TIMER_LOAD 0x00 -#define TWD_TIMER_COUNTER 0x04 -#define TWD_TIMER_CONTROL 0x08 -#define TWD_TIMER_INTSTAT 0x0C - -#define TWD_WDOG_LOAD 0x20 -#define TWD_WDOG_COUNTER 0x24 -#define TWD_WDOG_CONTROL 0x28 -#define TWD_WDOG_INTSTAT 0x2C -#define TWD_WDOG_RESETSTAT 0x30 -#define TWD_WDOG_DISABLE 0x34 - -#define TWD_TIMER_CONTROL_ENABLE (1 << 0) -#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) -#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) -#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) - -#endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 64f2252a25cd..cdb9022716fd 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -24,6 +24,8 @@ #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 +#define L2X0_TAG_LATENCY_CTRL 0x108 +#define L2X0_DATA_LATENCY_CTRL 0x10C #define L2X0_EVENT_CNT_CTRL 0x200 #define L2X0_EVENT_CNT1_CFG 0x204 #define L2X0_EVENT_CNT0_CFG 0x208 diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h new file mode 100644 index 000000000000..6a6c66be7f65 --- /dev/null +++ b/arch/arm/include/asm/hardware/pl080.h @@ -0,0 +1,138 @@ +/* arch/arm/include/asm/hardware/pl080.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * ARM PrimeCell PL080 DMA controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Note, there are some Samsung updates to this controller block which + * make it not entierly compatible with the PL080 specification from + * ARM. When in doubt, check the Samsung documentation first. + * + * The Samsung defines are PL080S, and add an extra controll register, + * the ability to move more than 2^11 counts of data and some extra + * OneNAND features. +*/ + +#define PL080_INT_STATUS (0x00) +#define PL080_TC_STATUS (0x04) +#define PL080_TC_CLEAR (0x08) +#define PL080_ERR_STATUS (0x0C) +#define PL080_ERR_CLEAR (0x10) +#define PL080_RAW_TC_STATUS (0x14) +#define PL080_RAW_ERR_STATUS (0x18) +#define PL080_EN_CHAN (0x1c) +#define PL080_SOFT_BREQ (0x20) +#define PL080_SOFT_SREQ (0x24) +#define PL080_SOFT_LBREQ (0x28) +#define PL080_SOFT_LSREQ (0x2C) + +#define PL080_CONFIG (0x30) +#define PL080_CONFIG_M2_BE (1 << 2) +#define PL080_CONFIG_M1_BE (1 << 1) +#define PL080_CONFIG_ENABLE (1 << 0) + +#define PL080_SYNC (0x34) + +/* Per channel configuration registers */ + +#define PL008_Cx_STRIDE (0x20) +#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20))) +#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20))) +#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20))) +#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20))) +#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20))) +#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20))) +#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20))) +#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20))) + +#define PL080_CH_SRC_ADDR (0x00) +#define PL080_CH_DST_ADDR (0x04) +#define PL080_CH_LLI (0x08) +#define PL080_CH_CONTROL (0x0C) +#define PL080_CH_CONFIG (0x10) +#define PL080S_CH_CONTROL2 (0x10) +#define PL080S_CH_CONFIG (0x14) + +#define PL080_LLI_ADDR_MASK (0x3fffffff << 2) +#define PL080_LLI_ADDR_SHIFT (2) +#define PL080_LLI_LM_AHB2 (1 << 0) + +#define PL080_CONTROL_TC_IRQ_EN (1 << 31) +#define PL080_CONTROL_PROT_MASK (0x7 << 28) +#define PL080_CONTROL_PROT_SHIFT (28) +#define PL080_CONTROL_PROT_SYS (1 << 28) +#define PL080_CONTROL_DST_INCR (1 << 27) +#define PL080_CONTROL_SRC_INCR (1 << 26) +#define PL080_CONTROL_DST_AHB2 (1 << 25) +#define PL080_CONTROL_SRC_AHB2 (1 << 24) +#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21) +#define PL080_CONTROL_DWIDTH_SHIFT (21) +#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18) +#define PL080_CONTROL_SWIDTH_SHIFT (18) +#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15) +#define PL080_CONTROL_DB_SIZE_SHIFT (15) +#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12) +#define PL080_CONTROL_SB_SIZE_SHIFT (12) +#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0) +#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0) + +#define PL080_BSIZE_1 (0x0) +#define PL080_BSIZE_4 (0x1) +#define PL080_BSIZE_8 (0x2) +#define PL080_BSIZE_16 (0x3) +#define PL080_BSIZE_32 (0x4) +#define PL080_BSIZE_64 (0x5) +#define PL080_BSIZE_128 (0x6) +#define PL080_BSIZE_256 (0x7) + +#define PL080_WIDTH_8BIT (0x0) +#define PL080_WIDTH_16BIT (0x1) +#define PL080_WIDTH_32BIT (0x2) + +#define PL080_CONFIG_HALT (1 << 18) +#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */ +#define PL080_CONFIG_LOCK (1 << 16) +#define PL080_CONFIG_TC_IRQ_MASK (1 << 15) +#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14) +#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11) +#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11) +#define PL080_CONFIG_DST_SEL_MASK (0xf << 6) +#define PL080_CONFIG_DST_SEL_SHIFT (6) +#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1) +#define PL080_CONFIG_SRC_SEL_SHIFT (1) +#define PL080_CONFIG_ENABLE (1 << 0) + +#define PL080_FLOW_MEM2MEM (0x0) +#define PL080_FLOW_MEM2PER (0x1) +#define PL080_FLOW_PER2MEM (0x2) +#define PL080_FLOW_SRC2DST (0x3) +#define PL080_FLOW_SRC2DST_DST (0x4) +#define PL080_FLOW_MEM2PER_PER (0x5) +#define PL080_FLOW_PER2MEM_PER (0x6) +#define PL080_FLOW_SRC2DST_SRC (0x7) + +/* DMA linked list chain structure */ + +struct pl080_lli { + u32 src_addr; + u32 dst_addr; + u32 next_lli; + u32 control0; +}; + +struct pl080s_lli { + u32 src_addr; + u32 dst_addr; + u32 next_lli; + u32 control0; + u32 control1; +}; + diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index f87328d4a180..5d72550a8097 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -41,7 +41,7 @@ #define VIC_PL192_VECT_ADDR 0xF00 #ifndef __ASSEMBLY__ -void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); +void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); #endif #endif diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h new file mode 100644 index 000000000000..50c7e7cfd670 --- /dev/null +++ b/arch/arm/include/asm/localtimer.h @@ -0,0 +1,63 @@ +/* + * arch/arm/include/asm/localtimer.h + * + * Copyright (C) 2004-2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_LOCALTIMER_H +#define __ASM_ARM_LOCALTIMER_H + +struct clock_event_device; + +/* + * Setup a per-cpu timer, whether it be a local timer or dummy broadcast + */ +void percpu_timer_setup(void); + +/* + * Called from assembly, this is the local timer IRQ handler + */ +asmlinkage void do_local_timer(struct pt_regs *); + + +#ifdef CONFIG_LOCAL_TIMERS + +#ifdef CONFIG_HAVE_ARM_TWD + +#include "smp_twd.h" + +#define local_timer_ack() twd_timer_ack() +#define local_timer_stop() twd_timer_stop() + +#else + +/* + * Platform provides this to acknowledge a local timer IRQ. + * Returns true if the local timer IRQ is to be processed. + */ +int local_timer_ack(void); + +/* + * Stop a local timer interrupt. + */ +void local_timer_stop(void); + +#endif + +/* + * Setup a local timer interrupt for a CPU. + */ +void local_timer_setup(struct clock_event_device *); + +#else + +static inline void local_timer_stop(void) +{ +} + +#endif + +#endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 58cf91f38e6f..742c2aaeb020 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -30,6 +30,14 @@ struct map_desc { #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); + +struct mem_type; +extern const struct mem_type *get_mem_type(unsigned int type); +/* + * external interface to remap single page with appropriate type + */ +extern int ioremap_page(unsigned long virt, unsigned long phys, + const struct mem_type *mtype); #else #define iotable_init(map,num) do { } while (0) #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 110295c5461d..1cd2d6416bda 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) return __va(ptr); } -#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) /* * Conversion functions: convert a page and protection to a page entry, diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 1845892260e7..6a89567ffc5b 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -71,6 +71,7 @@ struct thread_struct { regs->ARM_cpsr = USR26_MODE; \ if (elf_hwcap & HWCAP_THUMB && pc & 1) \ regs->ARM_cpsr |= PSR_T_BIT; \ + regs->ARM_cpsr |= PSR_ENDSTATE; \ regs->ARM_pc = pc & ~1; /* pc */ \ regs->ARM_sp = sp; /* sp */ \ regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 236a06b9b7ce..67b833c9b6b9 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -50,6 +50,7 @@ #define PSR_F_BIT 0x00000040 #define PSR_I_BIT 0x00000080 #define PSR_A_BIT 0x00000100 +#define PSR_E_BIT 0x00000200 #define PSR_J_BIT 0x01000000 #define PSR_Q_BIT 0x08000000 #define PSR_V_BIT 0x10000000 @@ -65,6 +66,22 @@ #define PSR_x 0x0000ff00 /* Extension */ #define PSR_c 0x000000ff /* Control */ +/* + * ARMv7 groups of APSR bits + */ +#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */ +#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */ +#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */ + +/* + * Default endianness state + */ +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define PSR_ENDSTATE PSR_E_BIT +#else +#define PSR_ENDSTATE 0 +#endif + #ifndef __ASSEMBLY__ /* diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index ada93a8fc2ef..4fc1565e4f93 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -29,6 +29,7 @@ #define SZ_512 0x00000200 #define SZ_1K 0x00000400 +#define SZ_2K 0x00000800 #define SZ_4K 0x00001000 #define SZ_8K 0x00002000 #define SZ_16K 0x00004000 diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 5995935338e1..a06e735b262a 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p); asmlinkage void do_IPI(struct pt_regs *regs); /* - * Setup the SMP cpu_possible_map + * Setup the set of possible CPUs (via set_cpu_possible) */ extern void smp_init_cpus(void); @@ -56,11 +56,6 @@ extern void smp_store_cpu_info(unsigned int cpuid); extern void smp_cross_call(const struct cpumask *mask); /* - * Broadcast a clock event to other CPUs. - */ -extern void smp_timer_broadcast(const struct cpumask *mask); - -/* * Boot a secondary CPU, and assign it the specified idle task. * This also gives us the initial stack to use for this CPU. */ @@ -101,43 +96,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask /* - * Local timer interrupt handling function (can be IPI'ed). - */ -extern void local_timer_interrupt(void); - -#ifdef CONFIG_LOCAL_TIMERS - -/* - * Stop a local timer interrupt. - */ -extern void local_timer_stop(void); - -/* - * Platform provides this to acknowledge a local timer IRQ - */ -extern int local_timer_ack(void); - -#else - -static inline void local_timer_stop(void) -{ -} - -#endif - -/* - * Setup a local timer interrupt for a CPU. - */ -extern void local_timer_setup(void); - -/* * show local interrupt info */ extern void show_local_irqs(struct seq_file *); -/* - * Called from assembly, this is the local timer IRQ handler - */ -asmlinkage void do_local_timer(struct pt_regs *); - #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h new file mode 100644 index 000000000000..2376835015d6 --- /dev/null +++ b/arch/arm/include/asm/smp_scu.h @@ -0,0 +1,7 @@ +#ifndef __ASMARM_ARCH_SCU_H +#define __ASMARM_ARCH_SCU_H + +unsigned int scu_get_core_count(void __iomem *); +void scu_enable(void __iomem *); + +#endif diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h new file mode 100644 index 000000000000..7be0978b2625 --- /dev/null +++ b/arch/arm/include/asm/smp_twd.h @@ -0,0 +1,12 @@ +#ifndef __ASMARM_SMP_TWD_H +#define __ASMARM_SMP_TWD_H + +struct clock_event_device; + +extern void __iomem *twd_base; + +void twd_timer_stop(void); +int twd_timer_ack(void); +void twd_timer_setup(struct clock_event_device *); + +#endif diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index a62218013c78..c964f3fc3bc5 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -40,6 +40,12 @@ #define TLB_V6_I_ASID (1 << 18) #define TLB_BTB (1 << 28) + +/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */ +#define TLB_V7_UIS_PAGE (1 << 19) +#define TLB_V7_UIS_FULL (1 << 20) +#define TLB_V7_UIS_ASID (1 << 21) + #define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ #define TLB_DCLEAN (1 << 30) #define TLB_WB (1 << 31) @@ -176,9 +182,17 @@ # define v6wbi_always_flags (-1UL) #endif +#ifdef CONFIG_SMP +#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ + TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) +#else +#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ + TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID) +#endif + #ifdef CONFIG_CPU_TLB_V7 -# define v7wbi_possible_flags v6wbi_tlb_flags -# define v7wbi_always_flags v6wbi_tlb_flags +# define v7wbi_possible_flags v7wbi_tlb_flags +# define v7wbi_always_flags v7wbi_tlb_flags # ifdef _TLB # define MULTI_TLB 1 # else @@ -316,6 +330,8 @@ static inline void local_flush_tlb_all(void) asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V7_UIS_FULL)) + asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ @@ -351,6 +367,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); if (tlb_flag(TLB_V6_I_ASID)) asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); + if (tlb_flag(TLB_V7_UIS_ASID)) + asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc"); if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ @@ -389,6 +407,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_V6_I_PAGE)) asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V7_UIS_PAGE)) + asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc"); if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ @@ -424,6 +444,8 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_V6_I_PAGE)) asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V7_UIS_PAGE)) + asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc"); if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 7897464e0c24..0da9bc9b3b1d 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -386,7 +386,9 @@ do { \ #ifdef CONFIG_MMU extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n); extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n); +extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n); extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n); +extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n); #else #define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) #define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 11a5197a221f..ff89d0b3abc5 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o +obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 83b1da6b7baa..fc8af43c5000 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -482,6 +482,9 @@ __und_usr: subeq r4, r2, #4 @ ARM instr at LR - 4 subne r4, r2, #2 @ Thumb instr at LR - 2 1: ldreqt r0, [r4] +#ifdef CONFIG_CPU_ENDIAN_BE8 + reveq r0, r0 @ little endian instruction +#endif beq call_fpe @ Thumb instruction #if __LINUX_ARM_ARCH__ >= 7 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index b55cb0331809..366e5097a41a 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -210,6 +210,9 @@ ENTRY(vector_swi) A710( teq ip, #0x0f000000 ) A710( bne .Larm710bug ) #endif +#ifdef CONFIG_CPU_ENDIAN_BE8 + rev r10, r10 @ little endian instruction +#endif #elif defined(CONFIG_AEABI) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index c3265a2e7cd4..1585423699ee 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -365,7 +365,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.ARM_r2 = (unsigned long)fn; regs.ARM_r3 = (unsigned long)do_exit; regs.ARM_pc = (unsigned long)kernel_thread_helper; - regs.ARM_cpsr = SVC_MODE; + regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE; return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 80b8b5c7e07a..442b87476f97 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -426,9 +426,13 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, */ thumb = handler & 1; - if (thumb) + if (thumb) { cpsr |= PSR_T_BIT; - else +#if __LINUX_ARM_ARCH__ >= 7 + /* clear the If-Then Thumb-2 execution state */ + cpsr &= ~PSR_IT_MASK; +#endif + } else cpsr &= ~PSR_T_BIT; } #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 6014dfd22af4..de885fd256c5 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -22,16 +22,20 @@ #include <linux/smp.h> #include <linux/seq_file.h> #include <linux/irq.h> +#include <linux/percpu.h> +#include <linux/clockchips.h> #include <asm/atomic.h> #include <asm/cacheflush.h> #include <asm/cpu.h> +#include <asm/cputype.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/processor.h> #include <asm/tlbflush.h> #include <asm/ptrace.h> +#include <asm/localtimer.h> /* * as from 2.5, kernels no longer have an init_tasks structure @@ -163,7 +167,7 @@ int __cpuexit __cpu_disable(void) * Take this CPU offline. Once we clear this, we can't return, * and we must not schedule until we're ready to give up the cpu. */ - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); /* * OK - migrate IRQs away from this CPU @@ -274,9 +278,9 @@ asmlinkage void __cpuinit secondary_start_kernel(void) local_fiq_enable(); /* - * Setup local timer for this CPU. + * Setup the percpu timer for this CPU. */ - local_timer_setup(); + percpu_timer_setup(); calibrate_delay(); @@ -285,7 +289,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * OK, now it's safe to let the boot CPU continue */ - cpu_set(cpu, cpu_online_map); + set_cpu_online(cpu, true); /* * OK, it's off to the idle thread for us @@ -383,10 +387,16 @@ void show_local_irqs(struct seq_file *p) seq_putc(p, '\n'); } +/* + * Timer (local or broadcast) support + */ +static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); + static void ipi_timer(void) { + struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent); irq_enter(); - local_timer_interrupt(); + evt->event_handler(evt); irq_exit(); } @@ -405,6 +415,42 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs) } #endif +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST +static void smp_timer_broadcast(const struct cpumask *mask) +{ + send_ipi_message(mask, IPI_TIMER); +} + +static void broadcast_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ +} + +static void local_timer_setup(struct clock_event_device *evt) +{ + evt->name = "dummy_timer"; + evt->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DUMMY; + evt->rating = 400; + evt->mult = 1; + evt->set_mode = broadcast_timer_set_mode; + evt->broadcast = smp_timer_broadcast; + + clockevents_register_device(evt); +} +#endif + +void __cpuinit percpu_timer_setup(void) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); + + evt->cpumask = cpumask_of(cpu); + + local_timer_setup(evt); +} + static DEFINE_SPINLOCK(stop_lock); /* @@ -417,7 +463,7 @@ static void ipi_cpu_stop(unsigned int cpu) dump_stack(); spin_unlock(&stop_lock); - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); local_fiq_disable(); local_irq_disable(); @@ -501,11 +547,6 @@ void smp_send_reschedule(int cpu) send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); } -void smp_timer_broadcast(const struct cpumask *mask) -{ - send_ipi_message(mask, IPI_TIMER); -} - void smp_send_stop(void) { cpumask_t mask = cpu_online_map; @@ -545,6 +586,12 @@ struct tlb_args { unsigned long ta_end; }; +/* all SMP configurations have the extended CPUID registers */ +static inline int tlb_ops_need_broadcast(void) +{ + return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2; +} + static inline void ipi_flush_tlb_all(void *ignored) { local_flush_tlb_all(); @@ -587,51 +634,61 @@ static inline void ipi_flush_tlb_kernel_range(void *arg) void flush_tlb_all(void) { - on_each_cpu(ipi_flush_tlb_all, NULL, 1); + if (tlb_ops_need_broadcast()) + on_each_cpu(ipi_flush_tlb_all, NULL, 1); + else + local_flush_tlb_all(); } void flush_tlb_mm(struct mm_struct *mm) { - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); + if (tlb_ops_need_broadcast()) + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); + else + local_flush_tlb_mm(mm); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { - struct tlb_args ta; - - ta.ta_vma = vma; - ta.ta_start = uaddr; - - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); + if (tlb_ops_need_broadcast()) { + struct tlb_args ta; + ta.ta_vma = vma; + ta.ta_start = uaddr; + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); + } else + local_flush_tlb_page(vma, uaddr); } void flush_tlb_kernel_page(unsigned long kaddr) { - struct tlb_args ta; - - ta.ta_start = kaddr; - - on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1); + if (tlb_ops_need_broadcast()) { + struct tlb_args ta; + ta.ta_start = kaddr; + on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1); + } else + local_flush_tlb_kernel_page(kaddr); } void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - struct tlb_args ta; - - ta.ta_vma = vma; - ta.ta_start = start; - ta.ta_end = end; - - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); + if (tlb_ops_need_broadcast()) { + struct tlb_args ta; + ta.ta_vma = vma; + ta.ta_start = start; + ta.ta_end = end; + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); + } else + local_flush_tlb_range(vma, start, end); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) { - struct tlb_args ta; - - ta.ta_start = start; - ta.ta_end = end; - - on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); + if (tlb_ops_need_broadcast()) { + struct tlb_args ta; + ta.ta_start = start; + ta.ta_end = end; + on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); + } else + local_flush_tlb_kernel_range(start, end); } diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c new file mode 100644 index 000000000000..d3831f616ee9 --- /dev/null +++ b/arch/arm/kernel/smp_scu.c @@ -0,0 +1,48 @@ +/* + * linux/arch/arm/kernel/smp_scu.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/smp_scu.h> +#include <asm/cacheflush.h> + +#define SCU_CTRL 0x00 +#define SCU_CONFIG 0x04 +#define SCU_CPU_STATUS 0x08 +#define SCU_INVALIDATE 0x0c +#define SCU_FPGA_REVISION 0x10 + +/* + * Get the number of CPU cores from the SCU configuration + */ +unsigned int __init scu_get_core_count(void __iomem *scu_base) +{ + unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG); + return (ncores & 0x03) + 1; +} + +/* + * Enable the SCU + */ +void __init scu_enable(void __iomem *scu_base) +{ + u32 scu_ctrl; + + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + scu_ctrl |= 1; + __raw_writel(scu_ctrl, scu_base + SCU_CTRL); + + /* + * Ensure that the data accessed by CPU0 before the SCU was + * initialised is visible to the other CPUs. + */ + flush_cache_all(); +} diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c new file mode 100644 index 000000000000..d8c88c633c6f --- /dev/null +++ b/arch/arm/kernel/smp_twd.c @@ -0,0 +1,175 @@ +/* + * linux/arch/arm/kernel/smp_twd.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> +#include <linux/jiffies.h> +#include <linux/clockchips.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/smp_twd.h> +#include <asm/hardware/gic.h> + +#define TWD_TIMER_LOAD 0x00 +#define TWD_TIMER_COUNTER 0x04 +#define TWD_TIMER_CONTROL 0x08 +#define TWD_TIMER_INTSTAT 0x0C + +#define TWD_WDOG_LOAD 0x20 +#define TWD_WDOG_COUNTER 0x24 +#define TWD_WDOG_CONTROL 0x28 +#define TWD_WDOG_INTSTAT 0x2C +#define TWD_WDOG_RESETSTAT 0x30 +#define TWD_WDOG_DISABLE 0x34 + +#define TWD_TIMER_CONTROL_ENABLE (1 << 0) +#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) +#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) +#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) + +/* set up by the platform code */ +void __iomem *twd_base; + +static unsigned long twd_timer_rate; + +static void twd_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + unsigned long ctrl; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* timer load already set up */ + ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE + | TWD_TIMER_CONTROL_PERIODIC; + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT; + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + ctrl = 0; + } + + __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); +} + +static int twd_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + + ctrl |= TWD_TIMER_CONTROL_ENABLE; + + __raw_writel(evt, twd_base + TWD_TIMER_COUNTER); + __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); + + return 0; +} + +/* + * local_timer_ack: checks for a local timer interrupt. + * + * If a local timer interrupt has occurred, acknowledge and return 1. + * Otherwise, return 0. + */ +int twd_timer_ack(void) +{ + if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { + __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + return 1; + } + + return 0; +} + +static void __cpuinit twd_calibrate_rate(void) +{ + unsigned long load, count; + u64 waitjiffies; + + /* + * If this is the first time round, we need to work out how fast + * the timer ticks + */ + if (twd_timer_rate == 0) { + printk(KERN_INFO "Calibrating local timer... "); + + /* Wait for a tick to start */ + waitjiffies = get_jiffies_64() + 1; + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + /* OK, now the tick has started, let's get the timer going */ + waitjiffies += 5; + + /* enable, no interrupt or reload */ + __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL); + + /* maximum value */ + __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + count = __raw_readl(twd_base + TWD_TIMER_COUNTER); + + twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); + + printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, + (twd_timer_rate / 100000) % 100); + } + + load = twd_timer_rate / HZ; + + __raw_writel(load, twd_base + TWD_TIMER_LOAD); +} + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit twd_timer_setup(struct clock_event_device *clk) +{ + unsigned long flags; + + twd_calibrate_rate(); + + clk->name = "local_timer"; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + clk->rating = 350; + clk->set_mode = twd_set_mode; + clk->set_next_event = twd_set_next_event; + clk->shift = 20; + clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift); + clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); + clk->min_delta_ns = clockevent_delta2ns(0xf, clk); + + /* Make sure our local interrupt controller has this enabled */ + local_irq_save(flags); + get_irq_chip(clk->irq)->unmask(clk->irq); + local_irq_restore(flags); + + clockevents_register_device(clk); +} + +/* + * take a local timer down + */ +void __cpuexit twd_timer_stop(void) +{ + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); +} diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index c90f27250ead..6c0779792546 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -141,6 +141,7 @@ SECTIONS .data : AT(__data_loc) { _data = .; /* address in memory */ + _sdata = .; /* * first, the init task union, aligned @@ -192,6 +193,7 @@ SECTIONS __bss_start = .; /* BSS */ *(.bss) *(COMMON) + __bss_stop = .; _end = .; } /* Stabs debugging sections. */ diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 866f84a586ff..030ba7219f48 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -29,6 +29,9 @@ else endif endif +# using lib_ here won't override already available weak symbols +obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o + lib-$(CONFIG_MMU) += $(mmu-y) ifeq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 4d6bc71231f3..844f56785ebc 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -18,7 +18,8 @@ * : sz - number of bytes to clear * Returns : number of bytes NOT cleared */ -ENTRY(__clear_user) +ENTRY(__clear_user_std) +WEAK(__clear_user) stmfd sp!, {r1, lr} mov r2, #0 cmp r1, #4 diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index 22f968bbdffd..878820f0a320 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -86,7 +86,8 @@ .text -ENTRY(__copy_to_user) +ENTRY(__copy_to_user_std) +WEAK(__copy_to_user) #include "copy_template.S" diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c new file mode 100644 index 000000000000..6b967ffb6552 --- /dev/null +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -0,0 +1,228 @@ +/* + * linux/arch/arm/lib/uaccess_with_memcpy.c + * + * Written by: Lennert Buytenhek and Nicolas Pitre + * Copyright (C) 2009 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/uaccess.h> +#include <linux/rwsem.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/hardirq.h> /* for in_atomic() */ +#include <asm/current.h> +#include <asm/page.h> + +static int +pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) +{ + unsigned long addr = (unsigned long)_addr; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + spinlock_t *ptl; + + pgd = pgd_offset(current->mm, addr); + if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) + return 0; + + pmd = pmd_offset(pgd, addr); + if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd))) + return 0; + + pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl); + if (unlikely(!pte_present(*pte) || !pte_young(*pte) || + !pte_write(*pte) || !pte_dirty(*pte))) { + pte_unmap_unlock(pte, ptl); + return 0; + } + + *ptep = pte; + *ptlp = ptl; + + return 1; +} + +static unsigned long noinline +__copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) +{ + int atomic; + + if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { + memcpy((void *)to, from, n); + return 0; + } + + /* the mmap semaphore is taken only if not in an atomic context */ + atomic = in_atomic(); + + if (!atomic) + down_read(¤t->mm->mmap_sem); + while (n) { + pte_t *pte; + spinlock_t *ptl; + int tocopy; + + while (!pin_page_for_write(to, &pte, &ptl)) { + if (!atomic) + up_read(¤t->mm->mmap_sem); + if (__put_user(0, (char __user *)to)) + goto out; + if (!atomic) + down_read(¤t->mm->mmap_sem); + } + + tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1; + if (tocopy > n) + tocopy = n; + + memcpy((void *)to, from, tocopy); + to += tocopy; + from += tocopy; + n -= tocopy; + + pte_unmap_unlock(pte, ptl); + } + if (!atomic) + up_read(¤t->mm->mmap_sem); + +out: + return n; +} + +unsigned long +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + /* + * This test is stubbed out of the main function above to keep + * the overhead for small copies low by avoiding a large + * register dump on the stack just to reload them right away. + * With frame pointer disabled, tail call optimization kicks in + * as well making this test almost invisible. + */ + if (n < 64) + return __copy_to_user_std(to, from, n); + return __copy_to_user_memcpy(to, from, n); +} + +static unsigned long noinline +__clear_user_memset(void __user *addr, unsigned long n) +{ + if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { + memset((void *)addr, 0, n); + return 0; + } + + down_read(¤t->mm->mmap_sem); + while (n) { + pte_t *pte; + spinlock_t *ptl; + int tocopy; + + while (!pin_page_for_write(addr, &pte, &ptl)) { + up_read(¤t->mm->mmap_sem); + if (__put_user(0, (char __user *)addr)) + goto out; + down_read(¤t->mm->mmap_sem); + } + + tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1; + if (tocopy > n) + tocopy = n; + + memset((void *)addr, 0, tocopy); + addr += tocopy; + n -= tocopy; + + pte_unmap_unlock(pte, ptl); + } + up_read(¤t->mm->mmap_sem); + +out: + return n; +} + +unsigned long __clear_user(void __user *addr, unsigned long n) +{ + /* See rational for this in __copy_to_user() above. */ + if (n < 64) + return __clear_user_std(addr, n); + return __clear_user_memset(addr, n); +} + +#if 0 + +/* + * This code is disabled by default, but kept around in case the chosen + * thresholds need to be revalidated. Some overhead (small but still) + * would be implied by a runtime determined variable threshold, and + * so far the measurement on concerned targets didn't show a worthwhile + * variation. + * + * Note that a fairly precise sched_clock() implementation is needed + * for results to make some sense. + */ + +#include <linux/vmalloc.h> + +static int __init test_size_treshold(void) +{ + struct page *src_page, *dst_page; + void *user_ptr, *kernel_ptr; + unsigned long long t0, t1, t2; + int size, ret; + + ret = -ENOMEM; + src_page = alloc_page(GFP_KERNEL); + if (!src_page) + goto no_src; + dst_page = alloc_page(GFP_KERNEL); + if (!dst_page) + goto no_dst; + kernel_ptr = page_address(src_page); + user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010)); + if (!user_ptr) + goto no_vmap; + + /* warm up the src page dcache */ + ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE); + + for (size = PAGE_SIZE; size >= 4; size /= 2) { + t0 = sched_clock(); + ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size); + t1 = sched_clock(); + ret |= __copy_to_user_std(user_ptr, kernel_ptr, size); + t2 = sched_clock(); + printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1); + } + + for (size = PAGE_SIZE; size >= 4; size /= 2) { + t0 = sched_clock(); + ret |= __clear_user_memset(user_ptr, size); + t1 = sched_clock(); + ret |= __clear_user_std(user_ptr, size); + t2 = sched_clock(); + printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1); + } + + if (ret) + ret = -EFAULT; + + vunmap(user_ptr); +no_vmap: + put_page(dst_page); +no_dst: + put_page(src_page); +no_src: + return ret; +} + +subsys_initcall(test_size_treshold); + +#endif diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index e263fda3e2d1..970fd6b6753e 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { * MCI (SD/MMC) */ static struct at91_mmc_data __initdata afeb9260_mmc_data = { + .det_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, .slot_b = 1, .wire4 = 1, }; @@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = { static struct i2c_board_info __initdata afeb9260_i2c_devices[] = { { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, { I2C_BOARD_INFO("fm3130", 0x68), }, { I2C_BOARD_INFO("24c64", 0x50), @@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void) /* I2C */ at91_add_device_i2c(afeb9260_i2c_devices, ARRAY_SIZE(afeb9260_i2c_devices)); + /* Audio */ + at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); } MACHINE_START(AFEB9260, "Custom afeb9260 board") diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 438efbb17482..cc270beadd5d 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -218,6 +218,13 @@ static struct gpio_led ek_leds[] = { } }; +static struct i2c_board_info __initdata ek_i2c_devices[] = { + { + I2C_BOARD_INFO("24c512", 0x50), + }, +}; + + static void __init ek_board_init(void) { /* Serial */ @@ -235,7 +242,7 @@ static void __init ek_board_init(void) /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ - at91_add_device_i2c(NULL, 0); + at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* PCK0 provides MCLK to the WM8731 */ diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index e4345106ee57..bac578fe0d3d 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -43,6 +43,25 @@ #define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM) +/* + * Chips have some kind of clocks : group them by functionality + */ +#define cpu_has_utmi() ( cpu_is_at91cap9() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_800M_plla() (cpu_is_at91sam9g20()) + +#define cpu_has_pllb() (!cpu_is_at91sam9rl()) + +#define cpu_has_upll() (0) + +/* USB host HS & FS */ +#define cpu_has_uhp() (!cpu_is_at91sam9rl()) + +/* USB device FS only */ +#define cpu_has_udpfs() (!cpu_is_at91sam9rl()) + + static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -140,7 +159,7 @@ static struct clk utmi_clk = { }; static struct clk uhpck = { .name = "uhpck", - .parent = &pllb, + /*.parent = ... we choose parent at runtime */ .mode = pmc_sys_mode, }; @@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css) case AT91_PMC_CSS_PLLA: return &plla; case AT91_PMC_CSS_PLLB: - return &pllb; + if (cpu_has_upll()) + /* CSS_PLLB == CSS_UPLL */ + return &utmi_clk; + else if (cpu_has_pllb()) + return &pllb; } return NULL; @@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) u32 pckr; pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - pckr &= AT91_PMC_CSS_PLLB; /* clock selection */ + pckr &= AT91_PMC_CSS; /* clock selection */ pckr |= prescale << 2; at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); clk->rate_hz = actual; @@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } EXPORT_SYMBOL(clk_set_parent); -/* establish PCK0..PCK3 parentage and rate */ +/* establish PCK0..PCKN parentage and rate */ static void __init init_programmable_clock(struct clk *clk) { struct clk *parent; @@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused) seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); - if (!cpu_is_at91sam9rl()) + if (cpu_has_pllb()) seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) + if (cpu_has_utmi()) seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR)); seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); + if (cpu_has_upll()) + seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB)); seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); seq_printf(s, "\n"); @@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = { &clk32k, &main_clk, &plla, - &pllb, - - /* PLLB children (USB) */ - &udpck, - &uhpck, /* MCK */ &mck }; +/* PLLB generated USB full speed clock init */ +static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) +{ + /* + * USB clock init: choose 48 MHz PLLB value, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + uhpck.parent = &pllb; + + at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; + pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); + if (cpu_is_at91rm9200()) { + uhpck.pmc_mask = AT91RM9200_PMC_UHP; + udpck.pmc_mask = AT91RM9200_PMC_UDP; + at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); + } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + udpck.pmc_mask = AT91SAM926x_PMC_UDP; + } else if (cpu_is_at91cap9()) { + uhpck.pmc_mask = AT91CAP9_PMC_UHP; + } + at91_sys_write(AT91_CKGR_PLLBR, 0); + + udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); +} + +/* UPLL generated USB full speed clock init */ +static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) +{ + /* + * USB clock init: choose 480 MHz from UPLL, + */ + unsigned int usbr = AT91_PMC_USBS_UPLL; + + /* Setup divider by 10 to reach 48 MHz */ + usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV; + + at91_sys_write(AT91_PMC_USB, usbr); + + /* Now set uhpck values */ + uhpck.parent = &utmi_clk; + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + uhpck.rate_hz = utmi_clk.parent->rate_hz; + uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); +} + int __init at91_clock_init(unsigned long main_clock) { unsigned tmp, freq, mckr; @@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock) /* report if PLLA is more than mildly overclocked */ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); - if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000) - || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000)) + if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000) + || (cpu_has_800M_plla() && plla.rate_hz > 800000000)) pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); - /* - * USB clock init: choose 48 MHz PLLB value, - * disable 48MHz clock during usb peripheral suspend. - * - * REVISIT: assumes MCK doesn't derive from PLLB! - */ - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; - pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); - if (cpu_is_at91rm9200()) { - uhpck.pmc_mask = AT91RM9200_PMC_UHP; - udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) { - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91cap9()) { - uhpck.pmc_mask = AT91CAP9_PMC_UHP; + + if (cpu_has_upll() && !cpu_has_pllb()) { + /* setup UTMI clock as the fourth primary clock + * (instead of pllb) */ + utmi_clk.type |= CLK_TYPE_PRIMARY; + utmi_clk.id = 3; } - at91_sys_write(AT91_CKGR_PLLBR, 0); - udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); - uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); /* * USB HS clock init */ - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) { + if (cpu_has_utmi()) /* * multiplier is hard-wired to 40 * (obtain the USB High Speed 480 MHz when input is 12 MHz) */ utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz; - } + + /* + * USB FS clock init + */ + if (cpu_has_pllb()) + at91_pllb_usbfs_clock_init(main_clock); + if (cpu_has_upll()) + /* assumes that we choose UPLL for USB and not PLLA */ + at91_upll_usbfs_clock_init(main_clock); /* * MCK and CPU derive from one of those primary clocks. @@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock) mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */ - if (cpu_is_at91rm9200()) + if (cpu_is_at91rm9200()) { mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - else if (cpu_is_at91sam9g20()) { + } else if (cpu_is_at91sam9g20()) { mck.rate_hz = (mckr & AT91_PMC_MDIV) ? freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ if (mckr & AT91_PMC_PDIV) freq /= 2; /* processor clock division */ - } else + } else { mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ + } /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) list_add_tail(&standard_pmc_clocks[i]->node, &clocks); - if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) + if (cpu_has_pllb()) + list_add_tail(&pllb.node, &clocks); + + if (cpu_has_uhp()) + list_add_tail(&uhpck.node, &clocks); + + if (cpu_has_udpfs()) + list_add_tail(&udpck.node, &clocks); + + if (cpu_has_utmi()) list_add_tail(&utmi_clk.node, &clocks); /* MCK and CPU clock are "always on" */ diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 9561e33b8a9a..64589eaaaee8 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -23,7 +23,7 @@ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */ +#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ #define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ @@ -39,11 +39,11 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ -#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ @@ -72,6 +72,7 @@ #define AT91_PMC_CSS_MAIN (1 << 0) #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ #define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ #define AT91_PMC_PRES_1 (0 << 2) #define AT91_PMC_PRES_2 (1 << 2) @@ -88,12 +89,25 @@ #define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) -#define AT91SAM9_PMC_MDIV_6 (3 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ #define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ #define AT91_PMC_PDIV_1 (0 << 12) #define AT91_PMC_PDIV_2 (1 << 12) +#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ +#define AT91_PMC_PLLADIV2_OFF (0 << 12) +#define AT91_PMC_PLLADIV2_ON (1 << 12) -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ +#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ +#define AT91_PMC_USBS_PLLA (0 << 0) +#define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ +#define AT91_PMC_CSSMCK_CSS (0 << 8) +#define AT91_PMC_CSSMCK_MCK (1 << 8) #define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ #define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ @@ -102,7 +116,7 @@ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ #define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index a9c78bc72b84..be747f5c6cd8 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -1,11 +1,26 @@ if ARCH_DAVINCI +config AINTC + bool + +config CP_INTC + bool + menu "TI DaVinci Implementations" comment "DaVinci Core Type" config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" + select AINTC + +config ARCH_DAVINCI_DM355 + bool "DaVinci 355 based system" + select AINTC + +config ARCH_DAVINCI_DM646x + bool "DaVinci 646x based system" + select AINTC comment "DaVinci Board Type" @@ -17,6 +32,34 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DM644x EVM +config MACH_SFFSDR + bool "Lyrtech SFFSDR" + depends on ARCH_DAVINCI_DM644x + help + Say Y here to select the Lyrtech Small Form Factor + Software Defined Radio (SFFSDR) board. + +config MACH_DAVINCI_DM355_EVM + bool "TI DM355 EVM" + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 EVM + +config MACH_DM355_LEOPARD + bool "DM355 Leopard board" + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 Leopard board. + +config MACH_DAVINCI_DM6467_EVM + bool "TI DM6467 EVM" + depends on ARCH_DAVINCI_DM646x + help + Configure this option to specify the whether the board used + for development is a DM6467 EVM + config DAVINCI_MUX bool "DAVINCI multiplexing support" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 1674661942f3..059ab78084ba 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -4,13 +4,22 @@ # # Common objects -obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o devices.o dma.o usb.o +obj-y := time.o clock.o serial.o io.o psc.o \ + gpio.o devices.o dma.o usb.o common.o sram.o obj-$(CONFIG_DAVINCI_MUX) += mux.o # Chip specific obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o +obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o +obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o + +obj-$(CONFIG_AINTC) += irq.o +obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o +obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o +obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o +obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o +obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c new file mode 100644 index 000000000000..5ac2f565d860 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -0,0 +1,298 @@ +/* + * TI DaVinci EVM board support + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/hardware.h> +#include <mach/dm355.h> +#include <mach/psc.h> +#include <mach/common.h> +#include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/nand.h> +#include <mach/mmc.h> +#include <mach/common.h> + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips, maybe with a different block size, partitioning may + * need to be changed. + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW_SYNDROME, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static int dm355evm_mmc_gpios = -EINVAL; + +static void dm355evm_mmcsd_gpios(unsigned gpio) +{ + gpio_request(gpio + 0, "mmc0_ro"); + gpio_request(gpio + 1, "mmc0_cd"); + gpio_request(gpio + 2, "mmc1_ro"); + gpio_request(gpio + 3, "mmc1_cd"); + + /* we "know" these are input-only so we don't + * need to call gpio_direction_input() + */ + + dm355evm_mmc_gpios = gpio; +} + +static struct i2c_board_info dm355evm_i2c_info[] = { + { I2C_BOARD_INFO("dm355evm_msp", 0x25), + .platform_data = dm355evm_mmcsd_gpios, + /* plus irq */ }, + /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ + /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + + gpio_request(5, "dm355evm_msp"); + gpio_direction_input(5); + dm355evm_i2c_info[0].irq = gpio_to_irq(5); + + i2c_register_board_info(1, dm355evm_i2c_info, + ARRAY_SIZE(dm355evm_i2c_info)); +} + +static struct resource dm355evm_dm9000_rsrc[] = { + { + /* addr */ + .start = 0x04014000, + .end = 0x04014001, + .flags = IORESOURCE_MEM, + }, { + /* data */ + .start = 0x04014002, + .end = 0x04014003, + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, + }, +}; + +static struct platform_device dm355evm_dm9000 = { + .name = "dm9000", + .id = -1, + .resource = dm355evm_dm9000_rsrc, + .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc), +}; + +static struct platform_device *davinci_evm_devices[] __initdata = { + &dm355evm_dm9000, + &davinci_nand_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm355_evm_map_io(void) +{ + dm355_init(); +} + +static int dm355evm_mmc_get_cd(int module) +{ + if (!gpio_is_valid(dm355evm_mmc_gpios)) + return -ENXIO; + /* low == card present */ + return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1); +} + +static int dm355evm_mmc_get_ro(int module) +{ + if (!gpio_is_valid(dm355evm_mmc_gpios)) + return -ENXIO; + /* high == card's write protect switch active */ + return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0); +} + +static struct davinci_mmc_config dm355evm_mmc_config = { + .get_cd = dm355evm_mmc_get_cd, + .get_ro = dm355evm_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_1, +}; + +/* Don't connect anything to J10 unless you're only using USB host + * mode *and* have to do so with some kind of gender-bender. If + * you have proper Mini-B or Mini-A cables (or Mini-A adapters) + * the ID pin won't need any help. + */ +#ifdef CONFIG_USB_MUSB_PERIPHERAL +#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ +#else +#define USB_ID_VALUE 1 /* ID pulled low */ +#endif + +static struct spi_eeprom at25640a = { + .byte_len = SZ_64K / 8, + .name = "at25640a", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm355_evm_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640a, + .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static __init void dm355_evm_init(void) +{ + struct clk *aemif; + + gpio_request(1, "dm9000"); + gpio_direction_input(1); + dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1); + + aemif = clk_get(&dm355evm_dm9000.dev, "aemif"); + if (IS_ERR(aemif)) + WARN("%s: unable to get AEMIF clock\n", __func__); + else + clk_enable(aemif); + + platform_add_devices(davinci_evm_devices, + ARRAY_SIZE(davinci_evm_devices)); + evm_init_i2c(); + davinci_serial_init(&uart_config); + + /* NOTE: NAND flash timings set by the UBL are slower than + * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 + * but could be 0x0400008c for about 25% faster page reads. + */ + + gpio_request(2, "usb_id_toggle"); + gpio_direction_output(2, USB_ID_VALUE); + /* irlml6401 switches over 1A in under 8 msec */ + setup_usb(500, 8); + + davinci_setup_mmc(0, &dm355evm_mmc_config); + davinci_setup_mmc(1, &dm355evm_mmc_config); + + dm355_init_spi0(BIT(0), dm355_evm_spi_info, + ARRAY_SIZE(dm355_evm_spi_info)); +} + +static __init void dm355_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm355_evm_map_io, + .init_irq = dm355_evm_irq_init, + .timer = &davinci_timer, + .init_machine = dm355_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c new file mode 100644 index 000000000000..28c9008df4f4 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -0,0 +1,296 @@ +/* + * DM355 leopard board support + * + * Based on board-dm355-evm.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/hardware.h> +#include <mach/dm355.h> +#include <mach/psc.h> +#include <mach/common.h> +#include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/nand.h> +#include <mach/mmc.h> +#include <mach/common.h> + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips, maybe with a different block size, partitioning may + * need to be changed. + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW_SYNDROME, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static int leopard_mmc_gpio = -EINVAL; + +static void dm355leopard_mmcsd_gpios(unsigned gpio) +{ + gpio_request(gpio + 0, "mmc0_ro"); + gpio_request(gpio + 1, "mmc0_cd"); + gpio_request(gpio + 2, "mmc1_ro"); + gpio_request(gpio + 3, "mmc1_cd"); + + /* we "know" these are input-only so we don't + * need to call gpio_direction_input() + */ + + leopard_mmc_gpio = gpio; +} + +static struct i2c_board_info dm355leopard_i2c_info[] = { + { I2C_BOARD_INFO("dm355leopard_msp", 0x25), + .platform_data = dm355leopard_mmcsd_gpios, + /* plus irq */ }, + /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ + /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ +}; + +static void __init leopard_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + + gpio_request(5, "dm355leopard_msp"); + gpio_direction_input(5); + dm355leopard_i2c_info[0].irq = gpio_to_irq(5); + + i2c_register_board_info(1, dm355leopard_i2c_info, + ARRAY_SIZE(dm355leopard_i2c_info)); +} + +static struct resource dm355leopard_dm9000_rsrc[] = { + { + /* addr */ + .start = 0x04000000, + .end = 0x04000001, + .flags = IORESOURCE_MEM, + }, { + /* data */ + .start = 0x04000016, + .end = 0x04000017, + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, + }, +}; + +static struct platform_device dm355leopard_dm9000 = { + .name = "dm9000", + .id = -1, + .resource = dm355leopard_dm9000_rsrc, + .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc), +}; + +static struct platform_device *davinci_leopard_devices[] __initdata = { + &dm355leopard_dm9000, + &davinci_nand_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm355_leopard_map_io(void) +{ + dm355_init(); +} + +static int dm355leopard_mmc_get_cd(int module) +{ + if (!gpio_is_valid(leopard_mmc_gpio)) + return -ENXIO; + /* low == card present */ + return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1); +} + +static int dm355leopard_mmc_get_ro(int module) +{ + if (!gpio_is_valid(leopard_mmc_gpio)) + return -ENXIO; + /* high == card's write protect switch active */ + return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0); +} + +static struct davinci_mmc_config dm355leopard_mmc_config = { + .get_cd = dm355leopard_mmc_get_cd, + .get_ro = dm355leopard_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, +}; + +/* Don't connect anything to J10 unless you're only using USB host + * mode *and* have to do so with some kind of gender-bender. If + * you have proper Mini-B or Mini-A cables (or Mini-A adapters) + * the ID pin won't need any help. + */ +#ifdef CONFIG_USB_MUSB_PERIPHERAL +#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ +#else +#define USB_ID_VALUE 1 /* ID pulled low */ +#endif + +static struct spi_eeprom at25640a = { + .byte_len = SZ_64K / 8, + .name = "at25640a", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm355_leopard_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640a, + .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static __init void dm355_leopard_init(void) +{ + struct clk *aemif; + + gpio_request(9, "dm9000"); + gpio_direction_input(9); + dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9); + + aemif = clk_get(&dm355leopard_dm9000.dev, "aemif"); + if (IS_ERR(aemif)) + WARN("%s: unable to get AEMIF clock\n", __func__); + else + clk_enable(aemif); + + platform_add_devices(davinci_leopard_devices, + ARRAY_SIZE(davinci_leopard_devices)); + leopard_init_i2c(); + davinci_serial_init(&uart_config); + + /* NOTE: NAND flash timings set by the UBL are slower than + * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 + * but could be 0x0400008c for about 25% faster page reads. + */ + + gpio_request(2, "usb_id_toggle"); + gpio_direction_output(2, USB_ID_VALUE); + /* irlml6401 switches over 1A in under 8 msec */ + setup_usb(500, 8); + + davinci_setup_mmc(0, &dm355leopard_mmc_config); + davinci_setup_mmc(1, &dm355leopard_mmc_config); + + dm355_init_spi0(BIT(0), dm355_leopard_spi_info, + ARRAY_SIZE(dm355_leopard_spi_info)); +} + +static __init void dm355_leopard_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm355_leopard_map_io, + .init_irq = dm355_leopard_irq_init, + .timer = &davinci_timer, + .init_machine = dm355_leopard_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index b2e7f9c63bc5..d9d40450bdc5 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -16,12 +16,11 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/memory.h> -#include <linux/etherdevice.h> #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> - +#include <linux/etherdevice.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -44,6 +43,9 @@ #include <mach/mux.h> #include <mach/psc.h> #include <mach/nand.h> +#include <mach/mmc.h> +#include <mach/emac.h> +#include <mach/common.h> #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -436,45 +438,15 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ -static struct memory_accessor *at24_mem_acc; - -static void at24_setup(struct memory_accessor *mem_acc, void *context) -{ - DECLARE_MAC_BUF(mac_str); - char mac_addr[6]; - - at24_mem_acc = mem_acc; - - /* Read MAC addr from EEPROM */ - if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { - printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", - print_mac(mac_str, mac_addr)); - } -} static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, - .setup = at24_setup, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, }; -int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) -{ - if (at24_mem_acc) - return at24_mem_acc->read(at24_mem_acc, buf, off, count); - return -ENODEV; -} -EXPORT_SYMBOL(dm6446evm_eeprom_read); - -int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) -{ - if (at24_mem_acc) - return at24_mem_acc->write(at24_mem_acc, buf, off, count); - return -ENODEV; -} -EXPORT_SYMBOL(dm6446evm_eeprom_write); - /* * MSP430 supports RTC, card detection, input from IR remote, and * a bit more. It triggers interrupts on GPIO(7) from pressing @@ -545,6 +517,27 @@ static int dm6444evm_msp430_get_pins(void) return (buf[3] << 8) | buf[2]; } +static int dm6444evm_mmc_get_cd(int module) +{ + int status = dm6444evm_msp430_get_pins(); + + return (status < 0) ? status : !(status & BIT(1)); +} + +static int dm6444evm_mmc_get_ro(int module) +{ + int status = dm6444evm_msp430_get_pins(); + + return (status < 0) ? status : status & BIT(6 + 8); +} + +static struct davinci_mmc_config dm6446evm_mmc_config = { + .get_cd = dm6444evm_mmc_get_cd, + .get_ro = dm6444evm_mmc_get_ro, + .wires = 4, + .version = MMC_CTLR_VERSION_1 +}; + static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("dm6446evm_msp", 0x23), @@ -598,7 +591,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init davinci_evm_map_io(void) { - davinci_map_common_io(); dm644x_init(); } @@ -639,6 +631,7 @@ static int davinci_phy_fixup(struct phy_device *phydev) static __init void davinci_evm_init(void) { struct clk *aemif_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -671,8 +664,13 @@ static __init void davinci_evm_init(void) ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + davinci_setup_mmc(0, &dm6446evm_mmc_config); + davinci_serial_init(&uart_config); + soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; + /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, davinci_phy_fixup); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c new file mode 100644 index 000000000000..e17de6352624 --- /dev/null +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -0,0 +1,262 @@ +/* + * TI DaVinci DM646X EVM board + * + * Derived from: arch/arm/mach-davinci/board-evm.c + * Copyright (C) 2006 Texas Instruments. + * + * (C) 2007-2008, MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +/************************************************************************** + * Included Files + **************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/major.h> +#include <linux/root_dev.h> +#include <linux/dma-mapping.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/i2c/pcf857x.h> +#include <linux/etherdevice.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/dm646x.h> +#include <mach/common.h> +#include <mach/psc.h> +#include <mach/serial.h> +#include <mach/i2c.h> +#include <mach/mmc.h> +#include <mach/emac.h> +#include <mach/common.h> + +#define DM646X_EVM_PHY_MASK (0x2) +#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +/* LEDS */ + +static struct gpio_led evm_leds[] = { + { .name = "DS1", .active_low = 1, }, + { .name = "DS2", .active_low = 1, }, + { .name = "DS3", .active_low = 1, }, + { .name = "DS4", .active_low = 1, }, +}; + +static __initconst struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, +}; + +static struct platform_device *evm_led_dev; + +static int evm_led_setup(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + struct gpio_led *leds = evm_leds; + int status; + + while (ngpio--) { + leds->gpio = gpio++; + leds++; + }; + + evm_led_dev = platform_device_alloc("leds-gpio", 0); + platform_device_add_data(evm_led_dev, &evm_led_data, + sizeof(evm_led_data)); + + evm_led_dev->dev.parent = &client->dev; + status = platform_device_add(evm_led_dev); + if (status < 0) { + platform_device_put(evm_led_dev); + evm_led_dev = NULL; + } + return status; +} + +static int evm_led_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + if (evm_led_dev) { + platform_device_unregister(evm_led_dev); + evm_led_dev = NULL; + } + return 0; +} + +static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL }; + +static int evm_sw_setup(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + int status; + int i; + char label[10]; + + for (i = 0; i < 4; ++i) { + snprintf(label, 10, "user_sw%d", i); + status = gpio_request(gpio, label); + if (status) + goto out_free; + evm_sw_gpio[i] = gpio++; + + status = gpio_direction_input(evm_sw_gpio[i]); + if (status) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + goto out_free; + } + + status = gpio_export(evm_sw_gpio[i], 0); + if (status) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + goto out_free; + } + } + return status; +out_free: + for (i = 0; i < 4; ++i) { + if (evm_sw_gpio[i] != -EINVAL) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + } + } + return status; +} + +static int evm_sw_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + int i; + + for (i = 0; i < 4; ++i) { + if (evm_sw_gpio[i] != -EINVAL) { + gpio_unexport(evm_sw_gpio[i]); + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + } + } + return 0; +} + +static int evm_pcf_setup(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + int status; + + if (ngpio < 8) + return -EINVAL; + + status = evm_sw_setup(client, gpio, 4, c); + if (status) + return status; + + return evm_led_setup(client, gpio+4, 4, c); +} + +static int evm_pcf_teardown(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + BUG_ON(ngpio < 8); + + evm_sw_teardown(client, gpio, 4, c); + evm_led_teardown(client, gpio+4, 4, c); + + return 0; +} + +static struct pcf857x_platform_data pcf_data = { + .gpio_base = DAVINCI_N_GPIO+1, + .setup = evm_pcf_setup, + .teardown = evm_pcf_teardown, +}; + +/* Most of this EEPROM is unused, but U-Boot uses some data: + * - 0x7f00, 6 bytes Ethernet Address + * - ... newer boards may have more + */ + +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, + { + I2C_BOARD_INFO("pcf8574a", 0x38), + .platform_data = &pcf_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 100 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static void __init davinci_map_io(void) +{ + dm646x_init(); +} + +static __init void evm_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + evm_init_i2c(); + davinci_serial_init(&uart_config); + + soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; +} + +static __init void davinci_dm646x_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = davinci_map_io, + .init_irq = davinci_dm646x_evm_irq_init, + .timer = &davinci_timer, + .init_machine = evm_init, +MACHINE_END + diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c new file mode 100644 index 000000000000..748a8e48541e --- /dev/null +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -0,0 +1,189 @@ +/* + * Lyrtech SFFSDR board support. + * + * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * + * Based on DV-EVM platform, original copyright follows: + * + * Copyright (C) 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/etherdevice.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/io.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/dm644x.h> +#include <mach/common.h> +#include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/psc.h> +#include <mach/mux.h> +#include <mach/common.h> + +#define SFFSDR_PHY_MASK (0x2) +#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +struct mtd_partition davinci_sffsdr_nandflash_partition[] = { + /* U-Boot Environment: Block 0 + * UBL: Block 1 + * U-Boot: Blocks 6-7 (256 kb) + * Integrity Kernel: Blocks 8-31 (3 Mb) + * Integrity Data: Blocks 100-END + */ + { + .name = "Linux Kernel", + .offset = 32 * SZ_128K, + .size = 16 * SZ_128K, /* 2 Mb */ + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "Linux ROOT", + .offset = MTDPART_OFS_APPEND, + .size = 256 * SZ_128K, /* 32 Mb */ + .mask_flags = 0, /* R/W */ + }, +}; + +static struct flash_platform_data davinci_sffsdr_nandflash_data = { + .parts = davinci_sffsdr_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition), +}; + +static struct resource davinci_sffsdr_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_sffsdr_nandflash_device = { + .name = "davinci_nand", /* Name of driver */ + .id = 0, + .dev = { + .platform_data = &davinci_sffsdr_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource), + .resource = davinci_sffsdr_nandflash_resource, +}; + +static struct emac_platform_data sffsdr_emac_pdata = { + .phy_mask = SFFSDR_PHY_MASK, + .mdio_max_freq = SFFSDR_MDIO_FREQUENCY, +}; + +static struct at24_platform_data eeprom_info = { + .byte_len = (64*1024) / 8, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("24lc64", 0x50), + .platform_data = &eeprom_info, + }, + /* Other I2C devices: + * MSP430, addr 0x23 (not used) + * PCA9543, addr 0x70 (setup done by U-Boot) + * ADS7828, addr 0x48 (ADC for voltage monitoring.) + */ +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static void __init sffsdr_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static struct platform_device *davinci_sffsdr_devices[] __initdata = { + &davinci_sffsdr_nandflash_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init davinci_sffsdr_map_io(void) +{ + dm644x_init(); +} + +static __init void davinci_sffsdr_init(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + platform_add_devices(davinci_sffsdr_devices, + ARRAY_SIZE(davinci_sffsdr_devices)); + sffsdr_init_i2c(); + davinci_serial_init(&uart_config); + soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; + setup_usb(0, 0); /* We support only peripheral mode. */ + + /* mux VLYNQ pins */ + davinci_cfg_reg(DM644X_VLYNQEN); + davinci_cfg_reg(DM644X_VLYNQWD); +} + +static __init void davinci_sffsdr_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(SFFSDR, "Lyrtech SFFSDR") + /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_sffsdr_map_io, + .init_irq = davinci_sffsdr_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_sffsdr_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index f0baaa15a57e..39bf321d70a2 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk) if (clk->parent) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->lpsc, 1); + davinci_psc_config(psc_domain(clk), clk->psc_ctlr, + clk->lpsc, 1); } static void __clk_disable(struct clk *clk) @@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk) if (WARN_ON(clk->usecount == 0)) return; if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) - davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + davinci_psc_config(psc_domain(clk), clk->psc_ctlr, + clk->lpsc, 0); if (clk->parent) __clk_disable(clk->parent); } @@ -164,11 +166,11 @@ static int __init clk_disable_unused(void) continue; /* ignore if in Disabled or SwRstDisable states */ - if (!davinci_psc_is_clk_active(ck->lpsc)) + if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc)) continue; pr_info("Clocks: disable unused %s\n", ck->name); - davinci_psc_config(psc_domain(ck), ck->lpsc, 0); + davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0); } spin_unlock_irq(&clockfw_lock); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 35736ec202f8..27233cb4a2fb 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -67,6 +67,7 @@ struct clk { u8 usecount; u8 flags; u8 lpsc; + u8 psc_ctlr; struct clk *parent; struct pll_data *pll_data; u32 div_reg; @@ -93,4 +94,7 @@ struct davinci_clk { } int davinci_clk_init(struct davinci_clk *clocks); + +extern struct platform_device davinci_wdt_device; + #endif diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c new file mode 100644 index 000000000000..61ede19c6b54 --- /dev/null +++ b/arch/arm/mach-davinci/common.c @@ -0,0 +1,108 @@ +/* + * Code commons to all DaVinci SoCs. + * + * Author: Mark A. Greer <mgreer@mvista.com> + * + * 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/module.h> +#include <linux/io.h> +#include <linux/etherdevice.h> + +#include <asm/tlb.h> +#include <asm/mach/map.h> + +#include <mach/common.h> +#include <mach/cputype.h> +#include <mach/emac.h> + +#include "clock.h" + +struct davinci_soc_info davinci_soc_info; +EXPORT_SYMBOL(davinci_soc_info); + +void __iomem *davinci_intc_base; +int davinci_intc_type; + +void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + off_t offset = (off_t)context; + + /* Read MAC addr from EEPROM */ + if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); +} + +static struct davinci_id * __init davinci_get_id(u32 jtag_id) +{ + int i; + struct davinci_id *dip; + u8 variant = (jtag_id & 0xf0000000) >> 28; + u16 part_no = (jtag_id & 0x0ffff000) >> 12; + + for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num; + i++, dip++) + /* Don't care about the manufacturer right now */ + if ((dip->part_no == part_no) && (dip->variant == variant)) + return dip; + + return NULL; +} + +void __init davinci_common_init(struct davinci_soc_info *soc_info) +{ + int ret; + struct davinci_id *dip; + + if (!soc_info) { + ret = -EINVAL; + goto err; + } + + memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info)); + + if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0)) + iotable_init(davinci_soc_info.io_desc, + davinci_soc_info.io_desc_num); + + /* + * Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* + * We want to check CPU revision early for cpu_is_xxxx() macros. + * IO space mapping must be initialized before we can do that. + */ + davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base); + + dip = davinci_get_id(davinci_soc_info.jtag_id); + if (!dip) { + ret = -EINVAL; + goto err; + } + + davinci_soc_info.cpu_id = dip->cpu_id; + pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant); + + if (davinci_soc_info.cpu_clks) { + ret = davinci_clk_init(davinci_soc_info.cpu_clks); + + if (ret != 0) + goto err; + } + + davinci_intc_base = davinci_soc_info.intc_base; + davinci_intc_type = davinci_soc_info.intc_type; + return; + +err: + pr_err("davinci_common_init: SoC Initialization failed\n"); +} diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c new file mode 100644 index 000000000000..96c8e97a7deb --- /dev/null +++ b/arch/arm/mach-davinci/cp_intc.c @@ -0,0 +1,161 @@ +/* + * TI Common Platform Interrupt Controller (cp_intc) driver + * + * Author: Steve Chen <schen@mvista.com> + * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/cp_intc.h> + +static void __iomem *cp_intc_base; + +static inline unsigned int cp_intc_read(unsigned offset) +{ + return __raw_readl(cp_intc_base + offset); +} + +static inline void cp_intc_write(unsigned long value, unsigned offset) +{ + __raw_writel(value, cp_intc_base + offset); +} + +static void cp_intc_ack_irq(unsigned int irq) +{ + cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR); +} + +/* Disable interrupt */ +static void cp_intc_mask_irq(unsigned int irq) +{ + /* XXX don't know why we need to disable nIRQ here... */ + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); + cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR); + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); +} + +/* Enable interrupt */ +static void cp_intc_unmask_irq(unsigned int irq) +{ + cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET); +} + +static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type) +{ + unsigned reg = BIT_WORD(irq); + unsigned mask = BIT_MASK(irq); + unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); + unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + polarity |= mask; + type |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + polarity &= ~mask; + type |= mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + polarity |= mask; + type &= ~mask; + break; + case IRQ_TYPE_LEVEL_LOW: + polarity &= ~mask; + type &= ~mask; + break; + default: + return -EINVAL; + } + + cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg)); + cp_intc_write(type, CP_INTC_SYS_TYPE(reg)); + + return 0; +} + +static struct irq_chip cp_intc_irq_chip = { + .name = "cp_intc", + .ack = cp_intc_ack_irq, + .mask = cp_intc_mask_irq, + .unmask = cp_intc_unmask_irq, + .set_type = cp_intc_set_irq_type, +}; + +void __init cp_intc_init(void __iomem *base, unsigned short num_irq, + u8 *irq_prio) +{ + unsigned num_reg = BITS_TO_LONGS(num_irq); + int i; + + cp_intc_base = base; + + cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); + + /* Disable all host interrupts */ + cp_intc_write(0, CP_INTC_HOST_ENABLE(0)); + + /* Disable system interrupts */ + for (i = 0; i < num_reg; i++) + cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i)); + + /* Set to normal mode, no nesting, no priority hold */ + cp_intc_write(0, CP_INTC_CTRL); + cp_intc_write(0, CP_INTC_HOST_CTRL); + + /* Clear system interrupt status */ + for (i = 0; i < num_reg; i++) + cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i)); + + /* Enable nIRQ (what about nFIQ?) */ + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); + + /* + * Priority is determined by host channel: lower channel number has + * higher priority i.e. channel 0 has highest priority and channel 31 + * had the lowest priority. + */ + num_reg = (num_irq + 3) >> 2; /* 4 channels per register */ + if (irq_prio) { + unsigned j, k; + u32 val; + + for (k = i = 0; i < num_reg; i++) { + for (val = j = 0; j < 4; j++, k++) { + val >>= 8; + if (k < num_irq) + val |= irq_prio[k] << 24; + } + + cp_intc_write(val, CP_INTC_CHAN_MAP(i)); + } + } else { + /* + * Default everything to channel 15 if priority not specified. + * Note that channel 0-1 are mapped to nFIQ and channels 2-31 + * are mapped to nIRQ. + */ + for (i = 0; i < num_reg; i++) + cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i)); + } + + /* Set up genirq dispatching for cp_intc */ + for (i = 0; i < num_irq; i++) { + set_irq_chip(i, &cp_intc_irq_chip); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + set_irq_handler(i, handle_edge_irq); + } + + /* Enable global interrupt */ + cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); +} diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index a31370b93dd2..de16f347566a 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -23,8 +23,14 @@ #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/mux.h> +#include <mach/edma.h> +#include <mach/mmc.h> +#include <mach/time.h> #define DAVINCI_I2C_BASE 0x01C21000 +#define DAVINCI_MMCSD0_BASE 0x01E10000 +#define DM355_MMCSD0_BASE 0x01E11000 +#define DM355_MMCSD1_BASE 0x01E00000 static struct resource i2c_resources[] = { { @@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) (void) platform_device_register(&davinci_i2c_device); } +#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) + +static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); + +static struct resource mmcsd0_resources[] = { + { + /* different on dm355 */ + .start = DAVINCI_MMCSD0_BASE, + .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_MMCINT, + .flags = IORESOURCE_IRQ, + }, { + /* different on dm355 */ + .start = IRQ_SDIOINT, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = DAVINCI_DMA_MMCRXEVT, + .flags = IORESOURCE_DMA, + }, { + .start = DAVINCI_DMA_MMCTXEVT, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd0_device = { + .name = "davinci_mmc", + .id = 0, + .dev = { + .dma_mask = &mmcsd0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmcsd0_resources), + .resource = mmcsd0_resources, +}; + +static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32); + +static struct resource mmcsd1_resources[] = { + { + .start = DM355_MMCSD1_BASE, + .end = DM355_MMCSD1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_DM355_MMCINT1, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_DM355_SDIOINT1, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = 30, /* rx */ + .flags = IORESOURCE_DMA, + }, { + .start = 31, /* tx */ + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd1_device = { + .name = "davinci_mmc", + .id = 1, + .dev = { + .dma_mask = &mmcsd1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmcsd1_resources), + .resource = mmcsd1_resources, +}; + + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ + struct platform_device *pdev = NULL; + + if (WARN_ON(cpu_is_davinci_dm646x())) + return; + + /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too; + * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused. + * + * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are + * not handled right here ... + */ + switch (module) { + case 1: + if (!cpu_is_davinci_dm355()) + break; + + /* REVISIT we may not need all these pins if e.g. this + * is a hard-wired SDIO device... + */ + davinci_cfg_reg(DM355_SD1_CMD); + davinci_cfg_reg(DM355_SD1_CLK); + davinci_cfg_reg(DM355_SD1_DATA0); + davinci_cfg_reg(DM355_SD1_DATA1); + davinci_cfg_reg(DM355_SD1_DATA2); + davinci_cfg_reg(DM355_SD1_DATA3); + + pdev = &davinci_mmcsd1_device; + break; + case 0: + if (cpu_is_davinci_dm355()) { + mmcsd0_resources[0].start = DM355_MMCSD0_BASE; + mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0; + + /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */ + davinci_cfg_reg(DM355_MMCSD0); + + /* enable RX EDMA */ + davinci_cfg_reg(DM355_EVT26_MMC0_RX); + } + + else if (cpu_is_davinci_dm644x()) { + /* REVISIT: should this be in board-init code? */ + void __iomem *base = + IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + + /* Power-on 3.3V IO cells */ + __raw_writel(0, base + DM64XX_VDD3P3V_PWDN); + /*Set up the pull regiter for MMC */ + davinci_cfg_reg(DM644X_MSTK); + } + + pdev = &davinci_mmcsd0_device; + break; + } + + if (WARN_ON(!pdev)) + return; + + pdev->dev.platform_data = config; + platform_device_register(pdev); +} + +#else + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ +} + +#endif + +/*-------------------------------------------------------------------------*/ + +static struct resource wdt_resources[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device davinci_wdt_device = { + .name = "watchdog", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void davinci_init_wdt(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + wdt_resources[0].start = (resource_size_t)soc_info->wdt_base; + wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1; + + platform_device_register(&davinci_wdt_device); +} + +/*-------------------------------------------------------------------------*/ + +struct davinci_timer_instance davinci_timer_instance[2] = { + { + .base = IO_ADDRESS(DAVINCI_TIMER0_BASE), + .bottom_irq = IRQ_TINT0_TINT12, + .top_irq = IRQ_TINT0_TINT34, + }, + { + .base = IO_ADDRESS(DAVINCI_TIMER1_BASE), + .bottom_irq = IRQ_TINT1_TINT12, + .top_irq = IRQ_TINT1_TINT34, + }, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init davinci_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + davinci_init_wdt(); + + return 0; +} +arch_initcall(davinci_init_devices); + diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c new file mode 100644 index 000000000000..baaaf328de2e --- /dev/null +++ b/arch/arm/mach-davinci/dm355.c @@ -0,0 +1,730 @@ +/* + * TI DaVinci DM355 chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/serial_8250.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <linux/spi/spi.h> + +#include <asm/mach/map.h> + +#include <mach/dm355.h> +#include <mach/clock.h> +#include <mach/cputype.h> +#include <mach/edma.h> +#include <mach/psc.h> +#include <mach/mux.h> +#include <mach/irqs.h> +#include <mach/time.h> +#include <mach/serial.h> +#include <mach/common.h> + +#include "clock.h" +#include "mux.h" + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* + * Device specific clocks + */ +#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, + .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, + .flags = PLL_HAS_PREDIV, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + /* FIXME -- crystal rate is board-specific */ + .rate = DM355_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll1_data, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk vpss_dac_clk = { + .name = "vpss_dac", + .parent = &pll1_sysclk3, + .lpsc = DM355_LPSC_VPSS_DAC, +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + + +static struct clk clkout1_clk = { + .name = "clkout1", + .parent = &pll1_aux_clk, + /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */ +}; + +static struct clk clkout2_clk = { + .name = "clkout2", + .parent = &pll1_sysclkbp, +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll2_data, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk clkout3_clk = { + .name = "clkout3", + .parent = &pll2_sysclkbp, + /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */ +}; + +static struct clk arm_clk = { + .name = "arm_clk", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +/* + * NOT LISTED below, and not touched by Linux + * - in SyncReset state by default + * .lpsc = DAVINCI_LPSC_TPCC, + * .lpsc = DAVINCI_LPSC_TPTC0, + * .lpsc = DAVINCI_LPSC_TPTC1, + * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk, + * .lpsc = DAVINCI_LPSC_MEMSTICK, + * - in Enabled state by default + * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS, + * .lpsc = DAVINCI_LPSC_SCR2, // "bus" + * .lpsc = DAVINCI_LPSC_SCR3, // "bus" + * .lpsc = DAVINCI_LPSC_SCR4, // "bus" + * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation" + * .lpsc = DAVINCI_LPSC_CFG27, // "test" + * .lpsc = DAVINCI_LPSC_CFG3, // "test" + * .lpsc = DAVINCI_LPSC_CFG5, // "test" + */ + +static struct clk mjcp_clk = { + .name = "mjcp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_IMCOP, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk asp0_clk = { + .name = "asp0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk asp1_clk = { + .name = "asp1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_McBSP1, +}; + +static struct clk mmcsd0_clk = { + .name = "mmcsd0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk mmcsd1_clk = { + .name = "mmcsd1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_MMC_SD1, +}; + +static struct clk spi0_clk = { + .name = "spi0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk spi1_clk = { + .name = "spi1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_SPI1, +}; + +static struct clk spi2_clk = { + .name = "spi2", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_SPI2, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk pwm3_clk = { + .name = "pwm3", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_PWM3, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +static struct clk timer3_clk = { + .name = "timer3", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_TIMER3, +}; + +static struct clk rto_clk = { + .name = "rto", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_RTO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct davinci_clk dm355_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "vpss_dac", &vpss_dac_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "clkout1", &clkout1_clk), + CLK(NULL, "clkout2", &clkout2_clk), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "clkout3", &clkout3_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "mjcp", &mjcp_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("soc-audio.0", NULL, &asp0_clk), + CLK("soc-audio.1", NULL, &asp1_clk), + CLK("davinci_mmc.0", NULL, &mmcsd0_clk), + CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK(NULL, "spi0", &spi0_clk), + CLK(NULL, "spi1", &spi1_clk), + CLK(NULL, "spi2", &spi2_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "pwm3", &pwm3_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "timer3", &timer3_clk), + CLK(NULL, "rto", &rto_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, NULL, NULL), +}; + +/*----------------------------------------------------------------------*/ + +static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); + +static struct resource dm355_spi0_resources[] = { + { + .start = 0x01c66000, + .end = 0x01c667ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM355_SPINT0_1, + .flags = IORESOURCE_IRQ, + }, + /* Not yet used, so not included: + * IORESOURCE_IRQ: + * - IRQ_DM355_SPINT0_0 + * IORESOURCE_DMA: + * - DAVINCI_DMA_SPI_SPIX + * - DAVINCI_DMA_SPI_SPIR + */ +}; + +static struct platform_device dm355_spi0_device = { + .name = "spi_davinci", + .id = 0, + .dev = { + .dma_mask = &dm355_spi0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(dm355_spi0_resources), + .resource = dm355_spi0_resources, +}; + +void __init dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len) +{ + /* for now, assume we need MISO */ + davinci_cfg_reg(DM355_SPI0_SDI); + + /* not all slaves will be wired up */ + if (chipselect_mask & BIT(0)) + davinci_cfg_reg(DM355_SPI0_SDENA0); + if (chipselect_mask & BIT(1)) + davinci_cfg_reg(DM355_SPI0_SDENA1); + + spi_register_board_info(info, len); + + platform_device_register(&dm355_spi0_device); +} + +/*----------------------------------------------------------------------*/ + +#define PINMUX0 0x00 +#define PINMUX1 0x04 +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm355_pins[] = { +#ifdef CONFIG_DAVINCI_MUX +MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false) + +MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false) +MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false) +MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false) +MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false) +MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false) +MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false) + +MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false) +MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false) + +MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false) +MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false) +MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false) + +MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false) +MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false) +MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false) + +INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false) +INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false) +INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false) + +EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false) +EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false) +EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) +#endif +}; + +static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm355_no_event[] = { + 12, 13, 24, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm355_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm355_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using (or muxing) TC*_ERR */ +}; + +static struct platform_device dm355_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm355_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +static struct map_desc dm355_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm355_ids[] = { + { + .variant = 0x0, + .part_no = 0xb73b, + .manufacturer = 0x00f, + .cpu_id = DAVINCI_CPU_ID_DM355, + .name = "dm355", + }, +}; + +static void __iomem *dm355_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : <unused> + */ +struct davinci_timer_info dm355_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm355_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DM355_UART2_BASE, + .irq = IRQ_DM355_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm355_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm355_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm355 = { + .io_desc = dm355_io_desc, + .io_desc_num = ARRAY_SIZE(dm355_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm355_ids, + .ids_num = ARRAY_SIZE(dm355_ids), + .cpu_clks = dm355_clks, + .psc_bases = dm355_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm355_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm355_pins, + .pinmux_pins_num = ARRAY_SIZE(dm355_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm355_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm355_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 104, + .gpio_irq = IRQ_DM355_GPIOBNK0, + .serial_dev = &dm355_serial_device, + .sram_dma = 0x00010000, + .sram_len = SZ_32K, +}; + +void __init dm355_init(void) +{ + davinci_common_init(&davinci_soc_info_dm355); +} + +static int __init dm355_init_devices(void) +{ + if (!cpu_is_davinci_dm355()) + return 0; + + davinci_cfg_reg(DM355_INT_EDMA_CC); + platform_device_register(&dm355_edma_device); + return 0; +} +postcore_initcall(dm355_init_devices); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d428ef192eac..fb5449b3c97b 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -11,7 +11,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> +#include <linux/serial_8250.h> #include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach/map.h> #include <mach/dm644x.h> #include <mach/clock.h> @@ -20,6 +24,9 @@ #include <mach/irqs.h> #include <mach/psc.h> #include <mach/mux.h> +#include <mach/time.h> +#include <mach/serial.h> +#include <mach/common.h> #include "clock.h" #include "mux.h" @@ -312,7 +319,14 @@ struct davinci_clk dm644x_clks[] = { CLK(NULL, NULL, NULL), }; -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) +static struct emac_platform_data dm644x_emac_pdata = { + .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_1, +}; static struct resource dm644x_emac_resources[] = { { @@ -330,11 +344,15 @@ static struct resource dm644x_emac_resources[] = { static struct platform_device dm644x_emac_device = { .name = "davinci_emac", .id = 1, + .dev = { + .platform_data = &dm644x_emac_pdata, + }, .num_resources = ARRAY_SIZE(dm644x_emac_resources), .resource = dm644x_emac_resources, }; -#endif +#define PINMUX0 0x00 +#define PINMUX1 0x04 /* * Device specific mux setup @@ -343,6 +361,7 @@ static struct platform_device dm644x_emac_device = { * reg offset mask mode */ static const struct mux_config dm644x_pins[] = { +#ifdef CONFIG_DAVINCI_MUX MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) @@ -383,8 +402,76 @@ MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +#endif }; +/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ +static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_VDINT0] = 2, + [IRQ_VDINT1] = 6, + [IRQ_VDINT2] = 6, + [IRQ_HISTINT] = 6, + [IRQ_H3AINT] = 6, + [IRQ_PRVUINT] = 6, + [IRQ_RSZINT] = 6, + [7] = 7, + [IRQ_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_VLCDINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_EMACINT] = 4, + [14] = 7, + [15] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_PSCIN] = 7, + [21] = 7, + [IRQ_IDE] = 4, + [23] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_SDIOINT] = 7, + [28] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_VLQINT] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_UARTINT2] = 3, + [IRQ_SPINT0] = 3, + [IRQ_SPINT1] = 3, + [45] = 7, + [IRQ_DSP2ARM0] = 4, + [IRQ_DSP2ARM1] = 4, + [IRQ_GPIO0] = 7, + [IRQ_GPIO1] = 7, + [IRQ_GPIO2] = 7, + [IRQ_GPIO3] = 7, + [IRQ_GPIO4] = 7, + [IRQ_GPIO5] = 7, + [IRQ_GPIO6] = 7, + [IRQ_GPIO7] = 7, + [IRQ_GPIOBNK0] = 7, + [IRQ_GPIOBNK1] = 7, + [IRQ_GPIOBNK2] = 7, + [IRQ_GPIOBNK3] = 7, + [IRQ_GPIOBNK4] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; /*----------------------------------------------------------------------*/ @@ -444,10 +531,118 @@ static struct platform_device dm644x_edma_device = { }; /*----------------------------------------------------------------------*/ + +static struct map_desc dm644x_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00008000), + .length = SZ_16K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm644x_ids[] = { + { + .variant = 0x0, + .part_no = 0xb700, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6446, + .name = "dm6446", + }, +}; + +static void __iomem *dm644x_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : <unused> + */ +struct davinci_timer_info dm644x_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm644x_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm644x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm644x_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm644x = { + .io_desc = dm644x_io_desc, + .io_desc_num = ARRAY_SIZE(dm644x_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm644x_ids, + .ids_num = ARRAY_SIZE(dm644x_ids), + .cpu_clks = dm644x_clks, + .psc_bases = dm644x_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm644x_pins, + .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm644x_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm644x_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 71, + .gpio_irq = IRQ_GPIOBNK0, + .serial_dev = &dm644x_serial_device, + .emac_pdata = &dm644x_emac_pdata, + .sram_dma = 0x00008000, + .sram_len = SZ_16K, +}; + void __init dm644x_init(void) { - davinci_clk_init(dm644x_clks); - davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); + davinci_common_init(&davinci_soc_info_dm644x); } static int __init dm644x_init_devices(void) @@ -456,6 +651,7 @@ static int __init dm644x_init_devices(void) return 0; platform_device_register(&dm644x_edma_device); + platform_device_register(&dm644x_emac_device); return 0; } postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c new file mode 100644 index 000000000000..334f0711e0f5 --- /dev/null +++ b/arch/arm/mach-davinci/dm646x.c @@ -0,0 +1,636 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/serial_8250.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach/map.h> + +#include <mach/dm646x.h> +#include <mach/clock.h> +#include <mach/cputype.h> +#include <mach/edma.h> +#include <mach/irqs.h> +#include <mach/psc.h> +#include <mach/mux.h> +#include <mach/time.h> +#include <mach/serial.h> +#include <mach/common.h> + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM646X_REF_FREQ 27000000 +#define DM646X_AUX_FREQ 24000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM646X_REF_FREQ, +}; + +static struct clk aux_clkin = { + .name = "aux_clkin", + .rate = DM646X_AUX_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_sysclk6 = { + .name = "pll1_sysclk6", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll1_sysclk8 = { + .name = "pll1_sysclk8", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV8, +}; + +static struct clk pll1_sysclk9 = { + .name = "pll1_sysclk9", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV9, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll2_clk = { + .name = "pll2_clk", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DM646X_LPSC_C64X_CPU, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART2, +}; + +static struct clk i2c_clk = { + .name = "I2CCLK", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_I2C, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_AEMIF, + .flags = ALWAYS_ENABLED, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_EMAC, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_PWM0, + .usecount = 1, /* REVIST: disabling hangs system */ +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_PWM1, + .usecount = 1, /* REVIST: disabling hangs system */ +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_sysclk3, + .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */ +}; + +static struct clk vpif0_clk = { + .name = "vpif0", + .parent = &ref_clk, + .lpsc = DM646X_LPSC_VPSSMSTR, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vpif1_clk = { + .name = "vpif1", + .parent = &ref_clk, + .lpsc = DM646X_LPSC_VPSSSLV, + .flags = ALWAYS_ENABLED, +}; + +struct davinci_clk dm646x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "aux", &aux_clkin), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk", &pll1_sysclk4), + CLK(NULL, "pll1_sysclk", &pll1_sysclk5), + CLK(NULL, "pll1_sysclk", &pll1_sysclk6), + CLK(NULL, "pll1_sysclk", &pll1_sysclk8), + CLK(NULL, "pll1_sysclk", &pll1_sysclk9), + CLK(NULL, "pll1_sysclk", &pll1_sysclkbp), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "vpif0", &vpif0_clk), + CLK(NULL, "vpif1", &vpif1_clk), + CLK(NULL, NULL, NULL), +}; + +static struct emac_platform_data dm646x_emac_pdata = { + .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_2, +}; + +static struct resource dm646x_emac_resources[] = { + { + .start = DM646X_EMAC_BASE, + .end = DM646X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM646X_EMACRXTHINT, + .end = IRQ_DM646X_EMACRXTHINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACRXINT, + .end = IRQ_DM646X_EMACRXINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACTXINT, + .end = IRQ_DM646X_EMACTXINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACMISCINT, + .end = IRQ_DM646X_EMACMISCINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm646x_emac_device = { + .name = "davinci_emac", + .id = 1, + .dev = { + .platform_data = &dm646x_emac_pdata, + }, + .num_resources = ARRAY_SIZE(dm646x_emac_resources), + .resource = dm646x_emac_resources, +}; + +#define PINMUX0 0x00 +#define PINMUX1 0x04 + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm646x_pins[] = { +#ifdef CONFIG_DAVINCI_MUX +MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true) + +MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false) + +MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false) + +MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true) + +MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true) + +MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true) + +MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true) + +MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true) + +MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true) + +MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true) + +MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true) + +MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true) + +MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true) + +MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true) +#endif +}; + +static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm646x_no_event[] = { + 0, 1, 2, 3, 13, + 14, 15, 24, 25, 26, + 27, 30, 31, 54, 55, + 56, + -1 +}; + +static struct edma_soc_info dm646x_edma_info = { + .n_channel = 64, + .n_region = 6, /* 0-1, 4-7 */ + .n_slot = 512, + .n_tc = 4, + .noevent = dma_chan_dm646x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc2", + .start = 0x01c10800, + .end = 0x01c10800 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc3", + .start = 0x01c10c00, + .end = 0x01c10c00 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm646x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm646x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +static struct map_desc dm646x_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm646x_ids[] = { + { + .variant = 0x0, + .part_no = 0xb770, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6467, + .name = "dm6467", + }, +}; + +static void __iomem *dm646x_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : <unused> + */ +struct davinci_timer_info dm646x_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +static struct plat_serial8250_port dm646x_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_DM646X_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm646x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm646x_serial_platform_data, + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm646x = { + .io_desc = dm646x_io_desc, + .io_desc_num = ARRAY_SIZE(dm646x_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm646x_ids, + .ids_num = ARRAY_SIZE(dm646x_ids), + .cpu_clks = dm646x_clks, + .psc_bases = dm646x_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm646x_pins, + .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm646x_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm646x_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 43, /* Only 33 usable */ + .gpio_irq = IRQ_DM646X_GPIOBNK0, + .serial_dev = &dm646x_serial_device, + .emac_pdata = &dm646x_emac_pdata, + .sram_dma = 0x10010000, + .sram_len = SZ_32K, +}; + +void __init dm646x_init(void) +{ + davinci_common_init(&davinci_soc_info_dm646x); +} + +static int __init dm646x_init_devices(void) +{ + if (!cpu_is_davinci_dm646x()) + return 0; + + platform_device_register(&dm646x_edma_device); + platform_device_register(&dm646x_emac_device); + return 0; +} +postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index 1aba41c6351e..1b6532159c58 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -23,6 +23,7 @@ #include <mach/cputype.h> #include <mach/irqs.h> #include <mach/hardware.h> +#include <mach/common.h> #include <mach/gpio.h> #include <asm/mach/irq.h> @@ -37,14 +38,13 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; -static unsigned __initdata ngpio; - /* create a non-inlined version */ static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } +static int __init davinci_gpio_irq_setup(void); /*--------------------------------------------------------------------------*/ @@ -115,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int __init davinci_gpio_setup(void) { int i, base; + unsigned ngpio; + struct davinci_soc_info *soc_info = &davinci_soc_info; - /* The gpio banks conceptually expose a segmented bitmap, + /* + * The gpio banks conceptually expose a segmented bitmap, * and "ngpio" is one more than the largest zero-based * bit index that's valid. */ - if (cpu_is_davinci_dm355()) { /* or dm335() */ - ngpio = 104; - } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ - ngpio = 71; - } else if (cpu_is_davinci_dm646x()) { - /* NOTE: each bank has several "reserved" bits, - * unusable as GPIOs. Only 33 of the GPIO numbers - * are usable, and we're not rejecting the others. - */ - ngpio = 43; - } else { - /* if cpu_is_davinci_dm643x() ngpio = 111 */ + ngpio = soc_info->gpio_num; + if (ngpio == 0) { pr_err("GPIO setup: how many GPIOs?\n"); return -EINVAL; } @@ -157,6 +150,7 @@ static int __init davinci_gpio_setup(void) gpiochip_add(&chips[i].chip); } + davinci_gpio_irq_setup(); return 0; } pure_initcall(davinci_gpio_setup); @@ -187,10 +181,15 @@ static void gpio_irq_enable(unsigned irq) { struct gpio_controller *__iomem g = get_irq_chip_data(irq); u32 mask = __gpio_mask(irq_to_gpio(irq)); + unsigned status = irq_desc[irq].status; + + status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; + if (!status) + status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; - if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING) + if (status & IRQ_TYPE_EDGE_FALLING) __raw_writel(mask, &g->set_falling); - if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING) + if (status & IRQ_TYPE_EDGE_RISING) __raw_writel(mask, &g->set_rising); } @@ -205,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger) irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; irq_desc[irq].status |= trigger; - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) - ? &g->set_falling : &g->clr_falling); - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) - ? &g->set_rising : &g->clr_rising); + /* don't enable the IRQ if it's currently disabled */ + if (irq_desc[irq].depth == 0) { + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) + ? &g->set_falling : &g->clr_falling); + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) + ? &g->set_rising : &g->clr_rising); + } return 0; } @@ -230,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) mask <<= 16; /* temporarily mask (level sensitive) parent IRQ */ + desc->chip->mask(irq); desc->chip->ack(irq); while (1) { u32 status; @@ -268,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; - unsigned bank_irq; struct clk *clk; u32 binten = 0; + unsigned ngpio, bank_irq; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + ngpio = soc_info->gpio_num; - if (cpu_is_davinci_dm355()) { /* or dm335() */ - bank_irq = IRQ_DM355_GPIOBNK0; - } else if (cpu_is_davinci_dm644x()) { - bank_irq = IRQ_GPIOBNK0; - } else if (cpu_is_davinci_dm646x()) { - bank_irq = IRQ_DM646X_GPIOBNK0; - } else { + bank_irq = soc_info->gpio_irq; + if (bank_irq == 0) { printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); return -EINVAL; } @@ -318,11 +319,9 @@ static int __init davinci_gpio_irq_setup(void) /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(binten, (void *__iomem) - IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); + __raw_writel(binten, soc_info->gpio_base + 0x08); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } -arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c deleted file mode 100644 index 018b994cd794..000000000000 --- a/arch/arm/mach-davinci/id.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Davinci CPU identification code - * - * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> - * - * Derived from OMAP1 CPU identification code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> - -#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) - -static unsigned int davinci_revision; - -struct davinci_id { - u8 variant; /* JTAG ID bits 31:28 */ - u16 part_no; /* JTAG ID bits 27:12 */ - u32 manufacturer; /* JTAG ID bits 11:1 */ - u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */ -}; - -/* Register values to detect the DaVinci version */ -static struct davinci_id davinci_ids[] __initdata = { - { - /* DM6446 */ - .part_no = 0xb700, - .variant = 0x0, - .manufacturer = 0x017, - .type = 0x64460000, - }, - { - /* DM646X */ - .part_no = 0xb770, - .variant = 0x0, - .manufacturer = 0x017, - .type = 0x64670000, - }, - { - /* DM355 */ - .part_no = 0xb73b, - .variant = 0x0, - .manufacturer = 0x00f, - .type = 0x03550000, - }, -}; - -/* - * Get Device Part No. from JTAG ID register - */ -static u16 __init davinci_get_part_no(void) -{ - u32 dev_id, part_no; - - dev_id = __raw_readl(JTAG_ID_BASE); - - part_no = ((dev_id >> 12) & 0xffff); - - return part_no; -} - -/* - * Get Device Revision from JTAG ID register - */ -static u8 __init davinci_get_variant(void) -{ - u32 variant; - - variant = __raw_readl(JTAG_ID_BASE); - - variant = (variant >> 28) & 0xf; - - return variant; -} - -unsigned int davinci_rev(void) -{ - return davinci_revision >> 16; -} -EXPORT_SYMBOL(davinci_rev); - -void __init davinci_check_revision(void) -{ - int i; - u16 part_no; - u8 variant; - - part_no = davinci_get_part_no(); - variant = davinci_get_variant(); - - /* First check only the major version in a safe way */ - for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { - if (part_no == (davinci_ids[i].part_no)) { - davinci_revision = davinci_ids[i].type; - break; - } - } - - /* Check if we can find the dev revision */ - for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { - if (part_no == davinci_ids[i].part_no && - variant == davinci_ids[i].variant) { - davinci_revision = davinci_ids[i].type; - break; - } - } - - printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", - davinci_rev(), variant); -} diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h deleted file mode 100644 index 3216f21c1238..000000000000 --- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * DaVinci DM6446 EVM board specific headers - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or ifndef. - */ - -#ifndef _MACH_DAVINCI_DM6446EVM_H -#define _MACH_DAVINCI_DM6446EVM_H - -#include <linux/types.h> - -int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); -int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); - -#endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 191770976250..a1f03b606d8f 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -17,7 +17,8 @@ struct sys_timer; extern struct sys_timer davinci_timer; extern void davinci_irq_init(void); -extern void davinci_map_common_io(void); +extern void __iomem *davinci_intc_base; +extern int davinci_intc_type; /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); @@ -25,4 +26,56 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec); /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); +struct davinci_timer_instance { + void __iomem *base; + u32 bottom_irq; + u32 top_irq; + unsigned long cmp_off; + unsigned int cmp_irq; +}; + +struct davinci_timer_info { + struct davinci_timer_instance *timers; + unsigned int clockevent_id; + unsigned int clocksource_id; +}; + +/* SoC specific init support */ +struct davinci_soc_info { + struct map_desc *io_desc; + unsigned long io_desc_num; + u32 cpu_id; + u32 jtag_id; + void __iomem *jtag_id_base; + struct davinci_id *ids; + unsigned long ids_num; + struct davinci_clk *cpu_clks; + void __iomem **psc_bases; + unsigned long psc_bases_num; + void __iomem *pinmux_base; + const struct mux_config *pinmux_pins; + unsigned long pinmux_pins_num; + void __iomem *intc_base; + int intc_type; + u8 *intc_irq_prios; + unsigned long intc_irq_num; + struct davinci_timer_info *timer_info; + void __iomem *wdt_base; + void __iomem *gpio_base; + unsigned gpio_num; + unsigned gpio_irq; + struct platform_device *serial_dev; + struct emac_platform_data *emac_pdata; + dma_addr_t sram_dma; + unsigned sram_len; +}; + +extern struct davinci_soc_info davinci_soc_info; + +extern void davinci_common_init(struct davinci_soc_info *soc_info); + +/* standard place to map on-chip SRAMs; they *may* support DMA */ +#define SRAM_VIRT 0xfffe0000 +#define SRAM_SIZE SZ_128K + #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h new file mode 100644 index 000000000000..c4d27eec8064 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -0,0 +1,57 @@ +/* + * TI Common Platform Interrupt Controller (cp_intc) definitions + * + * Author: Steve Chen <schen@mvista.com> + * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __ASM_HARDWARE_CP_INTC_H +#define __ASM_HARDWARE_CP_INTC_H + +#define CP_INTC_REV 0x00 +#define CP_INTC_CTRL 0x04 +#define CP_INTC_HOST_CTRL 0x0C +#define CP_INTC_GLOBAL_ENABLE 0x10 +#define CP_INTC_GLOBAL_NESTING_LEVEL 0x1C +#define CP_INTC_SYS_STAT_IDX_SET 0x20 +#define CP_INTC_SYS_STAT_IDX_CLR 0x24 +#define CP_INTC_SYS_ENABLE_IDX_SET 0x28 +#define CP_INTC_SYS_ENABLE_IDX_CLR 0x2C +#define CP_INTC_GLOBAL_WAKEUP_ENABLE 0x30 +#define CP_INTC_HOST_ENABLE_IDX_SET 0x34 +#define CP_INTC_HOST_ENABLE_IDX_CLR 0x38 +#define CP_INTC_PACING_PRESCALE 0x40 +#define CP_INTC_VECTOR_BASE 0x50 +#define CP_INTC_VECTOR_SIZE 0x54 +#define CP_INTC_VECTOR_NULL 0x58 +#define CP_INTC_PRIO_IDX 0x80 +#define CP_INTC_PRIO_VECTOR 0x84 +#define CP_INTC_SECURE_ENABLE 0x90 +#define CP_INTC_SECURE_PRIO_IDX 0x94 +#define CP_INTC_PACING_PARAM(n) (0x0100 + (n << 4)) +#define CP_INTC_PACING_DEC(n) (0x0104 + (n << 4)) +#define CP_INTC_PACING_MAP(n) (0x0108 + (n << 4)) +#define CP_INTC_SYS_RAW_STAT(n) (0x0200 + (n << 2)) +#define CP_INTC_SYS_STAT_CLR(n) (0x0280 + (n << 2)) +#define CP_INTC_SYS_ENABLE_SET(n) (0x0300 + (n << 2)) +#define CP_INTC_SYS_ENABLE_CLR(n) (0x0380 + (n << 2)) +#define CP_INTC_CHAN_MAP(n) (0x0400 + (n << 2)) +#define CP_INTC_HOST_MAP(n) (0x0800 + (n << 2)) +#define CP_INTC_HOST_PRIO_IDX(n) (0x0900 + (n << 2)) +#define CP_INTC_SYS_POLARITY(n) (0x0D00 + (n << 2)) +#define CP_INTC_SYS_TYPE(n) (0x0D80 + (n << 2)) +#define CP_INTC_WAKEUP_ENABLE(n) (0x0E00 + (n << 2)) +#define CP_INTC_DEBUG_SELECT(n) (0x0F00 + (n << 2)) +#define CP_INTC_SYS_SECURE_ENABLE(n) (0x1000 + (n << 2)) +#define CP_INTC_HOST_NESTING_LEVEL(n) (0x1100 + (n << 2)) +#define CP_INTC_HOST_ENABLE(n) (0x1500 + (n << 2)) +#define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2)) +#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) + +void __init cp_intc_init(void __iomem *base, unsigned short num_irq, + u8 *irq_prio); + +#endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index 27cfb1b3a662..d12a5ed2959a 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -16,17 +16,30 @@ #ifndef _ASM_ARCH_CPU_H #define _ASM_ARCH_CPU_H -extern unsigned int davinci_rev(void); +#include <mach/common.h> -#define IS_DAVINCI_CPU(type, id) \ -static inline int is_davinci_dm ##type(void) \ -{ \ - return (davinci_rev() == (id)) ? 1 : 0; \ +struct davinci_id { + u8 variant; /* JTAG ID bits 31:28 */ + u16 part_no; /* JTAG ID bits 27:12 */ + u16 manufacturer; /* JTAG ID bits 11:1 */ + u32 cpu_id; + char *name; +}; + +/* Can use lower 16 bits of cpu id for a variant when required */ +#define DAVINCI_CPU_ID_DM6446 0x64460000 +#define DAVINCI_CPU_ID_DM6467 0x64670000 +#define DAVINCI_CPU_ID_DM355 0x03550000 + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_ ##type(void) \ +{ \ + return (davinci_soc_info.cpu_id == (id)); \ } -IS_DAVINCI_CPU(644x, 0x6446) -IS_DAVINCI_CPU(646x, 0x6467) -IS_DAVINCI_CPU(355, 0x355) +IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446) +IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467) +IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) #ifdef CONFIG_ARCH_DAVINCI_DM644x #define cpu_is_davinci_dm644x() is_davinci_dm644x() diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index e6c0f0d5d062..de3fc2182b47 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -9,6 +9,16 @@ * or implied. */ +/* Modifications + * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart + * macros, based on debug-8250.S file + * but using 32-bit accesses required for + * some davinci devices. + */ + +#include <linux/serial_reg.h> +#define UART_SHIFT 2 + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? @@ -17,5 +27,22 @@ orr \rx, \rx, #0x00c20000 @ UART 0 .endm -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef FLOW_CONTROL +1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm + diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h new file mode 100644 index 000000000000..54903b72438e --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm355.h @@ -0,0 +1,22 @@ +/* + * Chip specific defines for DM355 SoC + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DM355_H +#define __ASM_ARCH_DM355_H + +#include <mach/hardware.h> + +struct spi_board_info; + +void __init dm355_init(void); +void dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); + +#endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 3dcb9f4e58b4..15d42b92a8c9 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -24,6 +24,7 @@ #include <linux/platform_device.h> #include <mach/hardware.h> +#include <mach/emac.h> #define DM644X_EMAC_BASE (0x01C80000) #define DM644X_EMAC_CNTRL_OFFSET (0x0000) diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h new file mode 100644 index 000000000000..1fc764c8646e --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -0,0 +1,26 @@ +/* + * Chip specific defines for DM646x SoC + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DM646X_H +#define __ASM_ARCH_DM646X_H + +#include <mach/hardware.h> +#include <mach/emac.h> + +#define DM646X_EMAC_BASE (0x01C80000) +#define DM646X_EMAC_CNTRL_OFFSET (0x0000) +#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM646X_EMAC_MDIO_OFFSET (0x4000) +#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm646x_init(void); + +#endif /* __ASM_ARCH_DM646X_H */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index f6fc5396dafc..24a379239d7f 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); -/* UNRELATED TO DMA */ -int davinci_alloc_iram(unsigned size); -void davinci_free_iram(unsigned addr, unsigned size); - /* platform_data for EDMA driver */ struct edma_soc_info { diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h new file mode 100644 index 000000000000..beff4fb7c845 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/emac.h @@ -0,0 +1,36 @@ +/* + * TI DaVinci EMAC platform support + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _MACH_DAVINCI_EMAC_H +#define _MACH_DAVINCI_EMAC_H + +#include <linux/if_ether.h> +#include <linux/memory.h> + +struct emac_platform_data { + char mac_addr[ETH_ALEN]; + u32 ctrl_reg_offset; + u32 ctrl_mod_reg_offset; + u32 ctrl_ram_offset; + u32 mdio_reg_offset; + u32 ctrl_ram_size; + u32 phy_mask; + u32 mdio_max_freq; + u8 rmii_en; + u8 version; +}; + +enum { + EMAC_VERSION_1, /* DM644x */ + EMAC_VERSION_2, /* DM646x */ +}; + +void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context); +#endif diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 039b84f933b3..fbdebc7cb409 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -15,17 +15,36 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + ldr \base, =davinci_intc_base + ldr \base, [\base] .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp +#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC) + ldr \tmp, =davinci_intc_type + ldr \tmp, [\tmp] + cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC + beq 1001f +#endif +#if defined(CONFIG_AINTC) ldr \tmp, [\base, #0x14] - mov \tmp, \tmp, lsr #2 + movs \tmp, \tmp, lsr #2 sub \irqnr, \tmp, #1 - cmp \tmp, #0 + b 1002f +#endif +#if defined(CONFIG_CP_INTC) +1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ + mov \tmp, \irqnr, lsr #3 + and \tmp, \tmp, #0xfc + add \tmp, \tmp, #0x280 /* get the register offset */ + ldr \irqstat, [\base, \tmp] /* get the intc status */ + cmp \irqstat, #0x0 +#endif +1002: .endm .macro irq_prio_table diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index efe3281364e6..ae0745568316 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -17,6 +17,7 @@ #include <asm-generic/gpio.h> #include <mach/irqs.h> +#include <mach/common.h> #define DAVINCI_GPIO_BASE 0x01C67000 @@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem __gpio_to_controller(unsigned gpio) { void *__iomem ptr; + void __iomem *base = davinci_soc_info.gpio_base; if (gpio < 32 * 1) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); + ptr = base + 0x10; else if (gpio < 32 * 2) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); + ptr = base + 0x38; else if (gpio < 32 * 3) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + ptr = base + 0x60; else if (gpio < 32 * 4) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); + ptr = base + 0x88; else ptr = NULL; return ptr; @@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio) { if (gpio >= DAVINCI_N_GPIO) return -EINVAL; - return DAVINCI_N_AINTC_IRQ + gpio; + return davinci_soc_info.intc_irq_num + gpio; } static inline int irq_to_gpio(unsigned irq) { /* caller guarantees gpio_to_irq() succeeded */ - return irq - DAVINCI_N_AINTC_IRQ; + return irq - davinci_soc_info.intc_irq_num; } #endif /* __DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 18066074c995..bc5d6aaa69a3 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -30,6 +30,9 @@ /* Base address */ #define DAVINCI_ARM_INTC_BASE 0x01C48000 +#define DAVINCI_INTC_TYPE_AINTC 0 +#define DAVINCI_INTC_TYPE_CP_INTC 1 + /* Interrupt lines */ #define IRQ_VDINT0 0 #define IRQ_VDINT1 1 diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 86c25c7f3ce3..c712c7cdf38f 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -21,7 +21,6 @@ * Definitions **************************************************************************/ #define DAVINCI_DDR_BASE 0x80000000 -#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */ #define PHYS_OFFSET DAVINCI_DDR_BASE diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h new file mode 100644 index 000000000000..5a85e24f3673 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/mmc.h @@ -0,0 +1,33 @@ +/* + * Board-specific MMC configuration + */ + +#ifndef _DAVINCI_MMC_H +#define _DAVINCI_MMC_H + +#include <linux/types.h> +#include <linux/mmc/host.h> + +struct davinci_mmc_config { + /* get_cd()/get_wp() may sleep */ + int (*get_cd)(int module); + int (*get_ro)(int module); + /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ + u8 wires; + + u32 max_freq; + + /* any additional host capabilities: OR'd in to mmc->f_caps */ + u32 caps; + + /* Version of the MMC/SD controller */ + u8 version; +}; +void davinci_setup_mmc(int module, struct davinci_mmc_config *config); + +enum { + MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ + MMC_CTLR_VERSION_2, /* DA830 */ +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index bae22cb3e27b..27378458542f 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -19,16 +19,6 @@ #ifndef __INC_MACH_MUX_H #define __INC_MACH_MUX_H -/* System module registers */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 -/* dm355 only */ -#define PINMUX2 0x08 -#define PINMUX3 0x0c -#define PINMUX4 0x10 -#define INTMUX 0x18 -#define EVTMUX 0x1c - struct mux_config { const char *name; const char *mux_reg_name; @@ -168,15 +158,9 @@ enum davinci_dm355_index { #ifdef CONFIG_DAVINCI_MUX /* setup pin muxing */ -extern void davinci_mux_init(void); -extern int davinci_mux_register(const struct mux_config *pins, - unsigned long size); extern int davinci_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ -static inline void davinci_mux_init(void) {} -static inline int davinci_mux_register(const struct mux_config *pins, - unsigned long size) { return 0; } static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } #endif diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 55a90d419fac..ab8a2586d1cc 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -27,6 +27,8 @@ #ifndef __ASM_ARCH_PSC_H #define __ASM_ARCH_PSC_H +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* Power and Sleep Controller (PSC) Domains */ #define DAVINCI_GPSC_ARMDOMAIN 0 #define DAVINCI_GPSC_DSPDOMAIN 1 @@ -116,8 +118,8 @@ #define DM646X_LPSC_TIMER1 35 #define DM646X_LPSC_ARM_INTC 45 -extern int davinci_psc_is_clk_active(unsigned int id); -extern void davinci_psc_config(unsigned int domain, unsigned int id, - char enable); +extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, + unsigned int id, char enable); #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 632847d74a1c..794fa5cf93c1 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -18,8 +18,6 @@ #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) -#define DM355_UART2_BASE (IO_PHYS + 0x206000) - /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c #define UART_DM646X_SCR 0x10 @@ -30,6 +28,6 @@ struct davinci_uart_config { unsigned int enabled_uarts; }; -extern void davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h new file mode 100644 index 000000000000..111f7cc71e07 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -0,0 +1,27 @@ +/* + * mach/sram.h - DaVinci simple SRAM allocator + * + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MACH_SRAM_H +#define __MACH_SRAM_H + +/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ +#define SRAM_GRANULARITY 512 + +/* + * SRAM allocations return a CPU virtual address, or NULL on error. + * If a DMA address is requested and the SRAM supports DMA, its + * mapped address is also returned. + * + * Errors include SRAM memory not being available, and requesting + * DMA mapped SRAM on systems which don't allow that. + */ +extern void *sram_alloc(size_t len, dma_addr_t *dma); +extern void sram_free(void *addr, size_t len); + +#endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h new file mode 100644 index 000000000000..1c971d8d8ba8 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/time.h @@ -0,0 +1,35 @@ +/* + * Local header file for DaVinci time code. + * + * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H +#define __ARCH_ARM_MACH_DAVINCI_TIME_H + +#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) +#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) +#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) + +enum { + T0_BOT, + T0_TOP, + T1_BOT, + T1_TOP, + NUM_TIMERS +}; + +#define IS_TIMER1(id) (id & 0x2) +#define IS_TIMER0(id) (!IS_TIMER1(id)) +#define IS_TIMER_TOP(id) ((id & 0x1)) +#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id)) + +#define ID_TO_TIMER(id) (IS_TIMER1(id) != 0) + +extern struct davinci_timer_instance davinci_timer_instance[]; + +#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 8c165def37b6..1e27475f9a23 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -13,11 +13,24 @@ #include <linux/serial_reg.h> #include <mach/serial.h> +#include <asm/mach-types.h> + +extern unsigned int __machine_arch_type; + +static u32 *uart; + +static u32 *get_uart_base(void) +{ + /* Add logic here for new platforms, using __macine_arch_type */ + return (u32 *)DAVINCI_UART0_BASE; +} + /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) { - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; + if (!uart) + uart = get_uart_base(); while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); @@ -26,7 +39,9 @@ static void putc(char c) static inline void flush(void) { - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; + if (!uart) + uart = get_uart_base(); + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index a548abb513e2..49912b48b1b0 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -9,47 +9,9 @@ */ #include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> #include <linux/io.h> #include <asm/tlb.h> -#include <asm/memory.h> - -#include <asm/mach/map.h> -#include <mach/clock.h> - -extern void davinci_check_revision(void); - -/* - * The machine specific code may provide the extra mapping besides the - * default mapping provided here. - */ -static struct map_desc davinci_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -void __init davinci_map_common_io(void) -{ - iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc)); - - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - /* We want to check CPU revision early for cpu_is_xxxx() macros. - * IO space mapping must be initialized before we can do that. - */ - davinci_check_revision(); -} #define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 5a324c90e291..af92ffee8471 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -26,6 +26,7 @@ #include <mach/hardware.h> #include <mach/cputype.h> +#include <mach/common.h> #include <asm/mach/irq.h> #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -41,18 +42,14 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C -const u8 *davinci_def_priorities; - -#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) - static inline unsigned int davinci_irq_readl(int offset) { - return __raw_readl(INTC_BASE + offset); + return __raw_readl(davinci_intc_base + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - __raw_writel(value, INTC_BASE + offset); + __raw_writel(value, davinci_intc_base + offset); } /* Disable interrupt */ @@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; -/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { - [IRQ_VDINT0] = 2, - [IRQ_VDINT1] = 6, - [IRQ_VDINT2] = 6, - [IRQ_HISTINT] = 6, - [IRQ_H3AINT] = 6, - [IRQ_PRVUINT] = 6, - [IRQ_RSZINT] = 6, - [7] = 7, - [IRQ_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_VLCDINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_EMACINT] = 4, - [14] = 7, - [15] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_PSCIN] = 7, - [21] = 7, - [IRQ_IDE] = 4, - [23] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_SDIOINT] = 7, - [28] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_VLQINT] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_UARTINT2] = 3, - [IRQ_SPINT0] = 3, - [IRQ_SPINT1] = 3, - [45] = 7, - [IRQ_DSP2ARM0] = 4, - [IRQ_DSP2ARM1] = 4, - [IRQ_GPIO0] = 7, - [IRQ_GPIO1] = 7, - [IRQ_GPIO2] = 7, - [IRQ_GPIO3] = 7, - [IRQ_GPIO4] = 7, - [IRQ_GPIO5] = 7, - [IRQ_GPIO6] = 7, - [IRQ_GPIO7] = 7, - [IRQ_GPIOBNK0] = 7, - [IRQ_GPIOBNK1] = 7, - [IRQ_GPIOBNK2] = 7, - [IRQ_GPIOBNK3] = 7, - [IRQ_GPIOBNK4] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_DM646X_VP_VERTINT0] = 7, - [IRQ_DM646X_VP_VERTINT1] = 7, - [IRQ_DM646X_VP_VERTINT2] = 7, - [IRQ_DM646X_VP_VERTINT3] = 7, - [IRQ_DM646X_VP_ERRINT] = 7, - [IRQ_DM646X_RESERVED_1] = 7, - [IRQ_DM646X_RESERVED_2] = 7, - [IRQ_DM646X_WDINT] = 7, - [IRQ_DM646X_CRGENINT0] = 7, - [IRQ_DM646X_CRGENINT1] = 7, - [IRQ_DM646X_TSIFINT0] = 7, - [IRQ_DM646X_TSIFINT1] = 7, - [IRQ_DM646X_VDCEINT] = 7, - [IRQ_DM646X_USBINT] = 7, - [IRQ_DM646X_USBDMAINT] = 7, - [IRQ_DM646X_PCIINT] = 7, - [IRQ_CCINT0] = 7, /* dma */ - [IRQ_CCERRINT] = 7, /* dma */ - [IRQ_TCERRINT0] = 7, /* dma */ - [IRQ_TCERRINT] = 7, /* dma */ - [IRQ_DM646X_TCERRINT2] = 7, - [IRQ_DM646X_TCERRINT3] = 7, - [IRQ_DM646X_IDE] = 7, - [IRQ_DM646X_HPIINT] = 7, - [IRQ_DM646X_EMACRXTHINT] = 7, - [IRQ_DM646X_EMACRXINT] = 7, - [IRQ_DM646X_EMACTXINT] = 7, - [IRQ_DM646X_EMACMISCINT] = 7, - [IRQ_DM646X_MCASP0TXINT] = 7, - [IRQ_DM646X_MCASP0RXINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_DM646X_RESERVED_3] = 7, - [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ - [IRQ_TINT0_TINT34] = 7, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_DM646X_VLQINT] = 7, - [IRQ_I2C] = 7, - [IRQ_UARTINT0] = 7, - [IRQ_UARTINT1] = 7, - [IRQ_DM646X_UARTINT2] = 7, - [IRQ_DM646X_SPINT0] = 7, - [IRQ_DM646X_SPINT1] = 7, - [IRQ_DM646X_DSP2ARMINT] = 7, - [IRQ_DM646X_RESERVED_4] = 7, - [IRQ_DM646X_PSCINT] = 7, - [IRQ_DM646X_GPIO0] = 7, - [IRQ_DM646X_GPIO1] = 7, - [IRQ_DM646X_GPIO2] = 7, - [IRQ_DM646X_GPIO3] = 7, - [IRQ_DM646X_GPIO4] = 7, - [IRQ_DM646X_GPIO5] = 7, - [IRQ_DM646X_GPIO6] = 7, - [IRQ_DM646X_GPIO7] = 7, - [IRQ_DM646X_GPIOBNK0] = 7, - [IRQ_DM646X_GPIOBNK1] = 7, - [IRQ_DM646X_GPIOBNK2] = 7, - [IRQ_DM646X_DDRINT] = 7, - [IRQ_DM646X_AEMIFINT] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_DM355_CCDC_VDINT0] = 2, - [IRQ_DM355_CCDC_VDINT1] = 6, - [IRQ_DM355_CCDC_VDINT2] = 6, - [IRQ_DM355_IPIPE_HST] = 6, - [IRQ_DM355_H3AINT] = 6, - [IRQ_DM355_IPIPE_SDR] = 6, - [IRQ_DM355_IPIPEIFINT] = 6, - [IRQ_DM355_OSDINT] = 7, - [IRQ_DM355_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_DM355_RTOINT] = 4, - [IRQ_DM355_UARTINT2] = 7, - [IRQ_DM355_TINT6] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_DM355_SPINT2_1] = 7, - [IRQ_DM355_TINT7] = 4, - [IRQ_DM355_SDIOINT0] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_DM355_MMCINT1] = 7, - [IRQ_DM355_PWMINT3] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_DM355_SDIOINT1] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_DM355_SPINT0_0] = 3, - [IRQ_DM355_SPINT0_1] = 3, - [IRQ_DM355_GPIO0] = 3, - [IRQ_DM355_GPIO1] = 7, - [IRQ_DM355_GPIO2] = 4, - [IRQ_DM355_GPIO3] = 4, - [IRQ_DM355_GPIO4] = 7, - [IRQ_DM355_GPIO5] = 7, - [IRQ_DM355_GPIO6] = 7, - [IRQ_DM355_GPIO7] = 7, - [IRQ_DM355_GPIO8] = 7, - [IRQ_DM355_GPIO9] = 7, - [IRQ_DM355_GPIOBNK0] = 7, - [IRQ_DM355_GPIOBNK1] = 7, - [IRQ_DM355_GPIOBNK2] = 7, - [IRQ_DM355_GPIOBNK3] = 7, - [IRQ_DM355_GPIOBNK4] = 7, - [IRQ_DM355_GPIOBNK5] = 7, - [IRQ_DM355_GPIOBNK6] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - - if (cpu_is_davinci_dm644x()) - davinci_def_priorities = dm644x_default_priorities; - else if (cpu_is_davinci_dm646x()) - davinci_def_priorities = dm646x_default_priorities; - else if (cpu_is_davinci_dm355()) - davinci_def_priorities = dm355_default_priorities; + const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index bbba0b247a44..d310f579aa85 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -21,18 +21,7 @@ #include <mach/hardware.h> #include <mach/mux.h> - -static const struct mux_config *mux_table; -static unsigned long pin_table_sz; - -int __init davinci_mux_register(const struct mux_config *pins, - unsigned long size) -{ - mux_table = pins; - pin_table_sz = size; - - return 0; -} +#include <mach/common.h> /* * Sets the DAVINCI MUX register based on the table @@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins, int __init_or_module davinci_cfg_reg(const unsigned long index) { static DEFINE_SPINLOCK(mux_spin_lock); - void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + struct davinci_soc_info *soc_info = &davinci_soc_info; + void __iomem *base = soc_info->pinmux_base; unsigned long flags; const struct mux_config *cfg; unsigned int reg_orig = 0, reg = 0; unsigned int mask, warn = 0; - if (!mux_table) + if (!soc_info->pinmux_pins) BUG(); - if (index >= pin_table_sz) { + if (index >= soc_info->pinmux_pins_num) { printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", - index, pin_table_sz); + index, soc_info->pinmux_pins_num); dump_stack(); return -ENODEV; } - cfg = &mux_table[index]; + cfg = &soc_info->pinmux_pins[index]; if (cfg->name == NULL) { printk(KERN_ERR "No entry for the specified index\n"); diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 84171abf5f7b..a78b657e916e 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -28,8 +28,6 @@ #include <mach/psc.h> #include <mach/mux.h> -#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 - /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 @@ -42,22 +40,42 @@ #define MDSTAT_STATE_MASK 0x1f /* Return nonzero iff the domain's clock is active */ -int __init davinci_psc_is_clk_active(unsigned int id) +int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) { - void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); - u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + void __iomem *psc_base; + u32 mdstat; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return 0; + } + + psc_base = soc_info->psc_bases[ctlr]; + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); /* if clocked, state can be "Enable" or "SyncReset" */ return mdstat & BIT(12); } /* Enable or disable a PSC domain */ -void davinci_psc_config(unsigned int domain, unsigned int id, char enable) +void davinci_psc_config(unsigned int domain, unsigned int ctlr, + unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; - void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + void __iomem *psc_base; + struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return; + } + + psc_base = soc_info->psc_bases[ctlr]; + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); mdctl &= ~MDSTAT_STATE_MASK; mdctl |= next_state; diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 695075796522..c530c7333d0a 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -33,6 +33,8 @@ #include <mach/serial.h> #include <mach/irqs.h> #include <mach/cputype.h> +#include <mach/common.h> + #include "clock.h" static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, @@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = DAVINCI_UART0_BASE, - .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .mapbase = DAVINCI_UART1_BASE, - .irq = IRQ_UARTINT1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .mapbase = DAVINCI_UART2_BASE, - .irq = IRQ_UARTINT2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0 - }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - static void __init davinci_serial_reset(struct plat_serial8250_port *p) { unsigned int pwremu = 0; @@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -void __init davinci_serial_init(struct davinci_uart_config *info) +int __init davinci_serial_init(struct davinci_uart_config *info) { int i; char name[16]; struct clk *uart_clk; - struct device *dev = &serial_device.dev; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + struct plat_serial8250_port *p = dev->platform_data; /* * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. + * You have to mux them off in device drivers later on if not needed. */ - for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; - - if (!(info->enabled_uarts & (1 << i))) { - p->flags = 0; + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) { + if (!(info->enabled_uarts & (1 << i))) continue; - } - - if (cpu_is_davinci_dm646x()) - p->iotype = UPIO_MEM32; - - if (cpu_is_davinci_dm355()) { - if (i == 2) { - p->mapbase = (unsigned long)DM355_UART2_BASE; - p->irq = IRQ_DM355_UARTINT2; - } - } sprintf(name, "uart%d", i); uart_clk = clk_get(dev, name); @@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info) davinci_serial_reset(p); } } -} -static int __init davinci_init(void) -{ - return platform_device_register(&serial_device); + return platform_device_register(soc_info->serial_dev); } - -arch_initcall(davinci_init); diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c new file mode 100644 index 000000000000..db54b2a66b4d --- /dev/null +++ b/arch/arm/mach-davinci/sram.c @@ -0,0 +1,74 @@ +/* + * mach-davinci/sram.c - DaVinci simple SRAM allocator + * + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/genalloc.h> + +#include <mach/common.h> +#include <mach/memory.h> +#include <mach/sram.h> + + +static struct gen_pool *sram_pool; + +void *sram_alloc(size_t len, dma_addr_t *dma) +{ + unsigned long vaddr; + dma_addr_t dma_base = davinci_soc_info.sram_dma; + + if (dma) + *dma = 0; + if (!sram_pool || (dma && !dma_base)) + return NULL; + + vaddr = gen_pool_alloc(sram_pool, len); + if (!vaddr) + return NULL; + + if (dma) + *dma = dma_base + (vaddr - SRAM_VIRT); + return (void *)vaddr; + +} +EXPORT_SYMBOL(sram_alloc); + +void sram_free(void *addr, size_t len) +{ + gen_pool_free(sram_pool, (unsigned long) addr, len); +} +EXPORT_SYMBOL(sram_free); + + +/* + * REVISIT This supports CPU and DMA access to/from SRAM, but it + * doesn't (yet?) support some other notable uses of SRAM: as TCM + * for data and/or instructions; and holding code needed to enter + * and exit suspend states (while DRAM can't be used). + */ +static int __init sram_init(void) +{ + unsigned len = davinci_soc_info.sram_len; + int status = 0; + + if (len) { + len = min(len, SRAM_SIZE); + sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1); + if (!sram_pool) + status = -ENOMEM; + } + if (sram_pool) + status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + WARN_ON(status < 0); + return status; +} +core_initcall(sram_init); + diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 494e01bff5c3..0884ca57bfb0 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/device.h> +#include <linux/platform_device.h> #include <mach/hardware.h> #include <asm/system.h> @@ -28,52 +29,41 @@ #include <asm/errno.h> #include <mach/io.h> #include <mach/cputype.h> +#include <mach/time.h> #include "clock.h" static struct clock_event_device clockevent_davinci; static unsigned int davinci_clock_tick_rate; -#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) -#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) -#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) - -enum { - T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS, -}; - -#define IS_TIMER1(id) (id & 0x2) -#define IS_TIMER0(id) (!IS_TIMER1(id)) -#define IS_TIMER_TOP(id) ((id & 0x1)) -#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id)) - -static int timer_irqs[NUM_TIMERS] = { - IRQ_TINT0_TINT12, - IRQ_TINT0_TINT34, - IRQ_TINT1_TINT12, - IRQ_TINT1_TINT34, -}; - /* * This driver configures the 2 64-bit count-up timers as 4 independent * 32-bit count-up timers used as follows: - * - * T0_BOT: Timer 0, bottom: clockevent source for hrtimers - * T0_TOP: Timer 0, top : clocksource for generic timekeeping - * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) - * T1_TOP: Timer 1, top : <unused> */ -#define TID_CLOCKEVENT T0_BOT -#define TID_CLOCKSOURCE T0_TOP + +enum { + TID_CLOCKEVENT, + TID_CLOCKSOURCE, +}; /* Timer register offsets */ -#define PID12 0x0 -#define TIM12 0x10 -#define TIM34 0x14 -#define PRD12 0x18 -#define PRD34 0x1c -#define TCR 0x20 -#define TGCR 0x24 -#define WDTCR 0x28 +#define PID12 0x0 +#define TIM12 0x10 +#define TIM34 0x14 +#define PRD12 0x18 +#define PRD34 0x1c +#define TCR 0x20 +#define TGCR 0x24 +#define WDTCR 0x28 + +/* Offsets of the 8 compare registers */ +#define CMP12_0 0x60 +#define CMP12_1 0x64 +#define CMP12_2 0x68 +#define CMP12_3 0x6c +#define CMP12_4 0x70 +#define CMP12_5 0x74 +#define CMP12_6 0x78 +#define CMP12_7 0x7c /* Timer register bitfields */ #define TCR_ENAMODE_DISABLE 0x0 @@ -105,6 +95,7 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; + unsigned long flags; void __iomem *base; unsigned long tim_off; unsigned long prd_off; @@ -114,30 +105,58 @@ struct timer_s { static struct timer_s timers[]; /* values for 'opts' field of struct timer_s */ -#define TIMER_OPTS_DISABLED 0x00 -#define TIMER_OPTS_ONESHOT 0x01 -#define TIMER_OPTS_PERIODIC 0x02 +#define TIMER_OPTS_DISABLED 0x01 +#define TIMER_OPTS_ONESHOT 0x02 +#define TIMER_OPTS_PERIODIC 0x04 +#define TIMER_OPTS_STATE_MASK 0x07 + +#define TIMER_OPTS_USE_COMPARE 0x80000000 +#define USING_COMPARE(t) ((t)->opts & TIMER_OPTS_USE_COMPARE) + +static char *id_to_name[] = { + [T0_BOT] = "timer0_0", + [T0_TOP] = "timer0_1", + [T1_BOT] = "timer1_0", + [T1_TOP] = "timer1_1", +}; static int timer32_config(struct timer_s *t) { - u32 tcr = __raw_readl(t->base + TCR); - - /* disable timer */ - tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - __raw_writel(tcr, t->base + TCR); - - /* reset counter to zero, set new period */ - __raw_writel(0, t->base + t->tim_off); - __raw_writel(t->period, t->base + t->prd_off); - - /* Set enable mode */ - if (t->opts & TIMER_OPTS_ONESHOT) { - tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift; - } else if (t->opts & TIMER_OPTS_PERIODIC) { - tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; + u32 tcr; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + if (USING_COMPARE(t)) { + struct davinci_timer_instance *dtip = + soc_info->timer_info->timers; + int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id); + + /* + * Next interrupt should be the current time reg value plus + * the new period (using 32-bit unsigned addition/wrapping + * to 0 on overflow). This assumes that the clocksource + * is setup to count to 2^32-1 before wrapping around to 0. + */ + __raw_writel(__raw_readl(t->base + t->tim_off) + t->period, + t->base + dtip[event_timer].cmp_off); + } else { + tcr = __raw_readl(t->base + TCR); + + /* disable timer */ + tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); + __raw_writel(tcr, t->base + TCR); + + /* reset counter to zero, set new period */ + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); + + /* Set enable mode */ + if (t->opts & TIMER_OPTS_ONESHOT) + tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift; + else if (t->opts & TIMER_OPTS_PERIODIC) + tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; + + __raw_writel(tcr, t->base + TCR); } - - __raw_writel(tcr, t->base + TCR); return 0; } @@ -182,13 +201,14 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct davinci_timer_instance *dtip = soc_info->timer_info->timers; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { u32 tgcr; - void __iomem *base = IO_ADDRESS(phys_bases[i]); + void __iomem *base = dtip[i].base; /* Disabled, Internal clock source */ __raw_writel(0, base + TCR); @@ -214,33 +234,33 @@ static void __init timer_init(void) /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; - u32 phys_base; - - if (t->name) { - t->id = i; - phys_base = (IS_TIMER1(t->id) ? - DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); - t->base = IO_ADDRESS(phys_base); - - if (IS_TIMER_BOT(t->id)) { - t->enamode_shift = 6; - t->tim_off = TIM12; - t->prd_off = PRD12; - } else { - t->enamode_shift = 22; - t->tim_off = TIM34; - t->prd_off = PRD34; - } - - /* Register interrupt */ - t->irqaction.name = t->name; - t->irqaction.dev_id = (void *)t; - if (t->irqaction.handler != NULL) { - setup_irq(timer_irqs[t->id], &t->irqaction); - } - - timer32_config(&timers[i]); + int timer = ID_TO_TIMER(t->id); + u32 irq; + + t->base = dtip[timer].base; + + if (IS_TIMER_BOT(t->id)) { + t->enamode_shift = 6; + t->tim_off = TIM12; + t->prd_off = PRD12; + irq = dtip[timer].bottom_irq; + } else { + t->enamode_shift = 22; + t->tim_off = TIM34; + t->prd_off = PRD34; + irq = dtip[timer].top_irq; + } + + /* Register interrupt */ + t->irqaction.name = t->name; + t->irqaction.dev_id = (void *)t; + + if (t->irqaction.handler != NULL) { + irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; + setup_irq(irq, &t->irqaction); } + + timer32_config(&timers[i]); } } @@ -255,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs) } static struct clocksource clocksource_davinci = { - .name = "timer0_1", .rating = 300, .read = read_cycles, .mask = CLOCKSOURCE_MASK(32), @@ -284,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: t->period = davinci_clock_tick_rate / (HZ); - t->opts = TIMER_OPTS_PERIODIC; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_PERIODIC; timer32_config(t); break; case CLOCK_EVT_MODE_ONESHOT: - t->opts = TIMER_OPTS_ONESHOT; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_ONESHOT; break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - t->opts = TIMER_OPTS_DISABLED; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_DISABLED; break; case CLOCK_EVT_MODE_RESUME: break; @@ -300,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_davinci = { - .name = "timer0_0", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .set_next_event = davinci_set_next_event, @@ -311,10 +332,42 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { struct clk *timer_clk; - + struct davinci_soc_info *soc_info = &davinci_soc_info; + unsigned int clockevent_id; + unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + clockevent_id = soc_info->timer_info->clockevent_id; + clocksource_id = soc_info->timer_info->clocksource_id; + + timers[TID_CLOCKEVENT].id = clockevent_id; + timers[TID_CLOCKSOURCE].id = clocksource_id; + + /* + * If using same timer for both clock events & clocksource, + * a compare register must be used to generate an event interrupt. + * This is equivalent to a oneshot timer only (not periodic). + */ + if (clockevent_id == clocksource_id) { + struct davinci_timer_instance *dtip = + soc_info->timer_info->timers; + int event_timer = ID_TO_TIMER(clockevent_id); + + /* Only bottom timers can use compare regs */ + if (IS_TIMER_TOP(clockevent_id)) + pr_warning("davinci_timer_init: Invalid use" + " of system timers. Results unpredictable.\n"); + else if ((dtip[event_timer].cmp_off == 0) + || (dtip[event_timer].cmp_irq == 0)) + pr_warning("davinci_timer_init: Invalid timer instance" + " setup. Results unpredictable.\n"); + else { + timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE; + clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT; + } + } + /* init timer hw */ timer_init(); @@ -325,6 +378,7 @@ static void __init davinci_timer_init(void) davinci_clock_tick_rate = clk_get_rate(timer_clk); /* setup clocksource */ + clocksource_davinci.name = id_to_name[clocksource_id]; clocksource_davinci.mult = clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); @@ -332,12 +386,12 @@ static void __init davinci_timer_init(void) printk(err, clocksource_davinci.name); /* setup clockevent */ + clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id]; clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); - clockevent_davinci.min_delta_ns = - clockevent_delta2ns(1, &clockevent_davinci); + clockevent_davinci.min_delta_ns = 50000; /* 50 usec */ clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); @@ -349,15 +403,14 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ -void davinci_watchdog_reset(void) { +void davinci_watchdog_reset(void) +{ u32 tgcr, wdtcr; - void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); - struct device dev; + struct davinci_soc_info *soc_info = &davinci_soc_info; + void __iomem *base = soc_info->wdt_base; struct clk *wd_clk; - char *name = "watchdog"; - dev_set_name(&dev, name); - wd_clk = clk_get(&dev, NULL); + wd_clk = clk_get(&davinci_wdt_device.dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; clk_enable(wd_clk); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 56bddcef6905..d7291c682a64 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -9,87 +9,135 @@ config CRUNCH comment "EP93xx Platforms" +choice + prompt "EP93xx first SDRAM bank selection" + default EP93XX_SDCE3_SYNC_PHYS_OFFSET + +config EP93XX_SDCE3_SYNC_PHYS_OFFSET + bool "0x00000000 - SDCE3/SyncBoot" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0x00000000 + +config EP93XX_SDCE0_PHYS_OFFSET + bool "0xc0000000 - SDCEO" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xc0000000 + +endchoice + config MACH_ADSSPHERE bool "Support ADS Sphere" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the ADS Sphere board. +config MACH_EDB93XX + bool + +config MACH_EDB9301 + bool "Support Cirrus Logic EDB9301" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9301 Evaluation Board. + config MACH_EDB9302 bool "Support Cirrus Logic EDB9302" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302 Evaluation Board. config MACH_EDB9302A bool "Support Cirrus Logic EDB9302A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302A Evaluation Board. config MACH_EDB9307 bool "Support Cirrus Logic EDB9307" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9307 Evaluation Board. config MACH_EDB9307A bool "Support Cirrus Logic EDB9307A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9307A Evaluation Board. config MACH_EDB9312 bool "Support Cirrus Logic EDB9312" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9312 Evaluation Board. config MACH_EDB9315 bool "Support Cirrus Logic EDB9315" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315 Evaluation Board. config MACH_EDB9315A bool "Support Cirrus Logic EDB9315A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315A Evaluation Board. config MACH_GESBC9312 + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "Support Glomation GESBC-9312-sx" help Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board. config MACH_MICRO9 - bool - default n + bool config MACH_MICRO9H - bool "Support Contec Hypercontrol Micro9-H" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-H board. + bool "Support Contec Hypercontrol Micro9-H" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-H board. config MACH_MICRO9M - bool "Support Contec Hypercontrol Micro9-M" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-M board. + bool "Support Contec Hypercontrol Micro9-M" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-M board. config MACH_MICRO9L - bool "Support Contec Hypercontrol Micro9-L" - select MACH_MICRO9 - help - Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-L board. + bool "Support Contec Hypercontrol Micro9-L" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Hypercontrol Micro9-L board. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 9522e205b73f..eae6199a9891 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -7,13 +7,7 @@ obj-n := obj- := obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o -obj-$(CONFIG_MACH_EDB9302) += edb9302.o -obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o -obj-$(CONFIG_MACH_EDB9307) += edb9307.o -obj-$(CONFIG_MACH_EDB9307A) += edb9307a.o -obj-$(CONFIG_MACH_EDB9312) += edb9312.o -obj-$(CONFIG_MACH_EDB9315) += edb9315.o -obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o +obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index d5561ad15bad..27a085a8f12a 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1,2 +1,5 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 + zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000 +params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 + + zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000 +params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index b2eede5531c8..6c4c1633ed12 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -72,58 +72,58 @@ static struct clk clk_h; static struct clk clk_p; static struct clk clk_pll2; static struct clk clk_usb_host = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = EP93XX_SYSCON_CLOCK_USH_EN, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN, }; /* DMA Clocks */ static struct clk clk_m2p0 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00020000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0, }; static struct clk clk_m2p1 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00010000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1, }; static struct clk clk_m2p2 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00080000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2, }; static struct clk clk_m2p3 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00040000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3, }; static struct clk clk_m2p4 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00200000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4, }; static struct clk clk_m2p5 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00100000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5, }; static struct clk clk_m2p6 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00800000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6, }; static struct clk clk_m2p7 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x00400000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7, }; static struct clk clk_m2p8 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x02000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8, }; static struct clk clk_m2p9 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x01000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9, }; static struct clk clk_m2m0 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x04000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0, }; static struct clk clk_m2m1 = { - .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, - .enable_mask = 0x08000000, + .enable_reg = EP93XX_SYSCON_PWRCNT, + .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1, }; #define INIT_CK(dev,con,ck) \ @@ -138,7 +138,7 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "hclk", &clk_h), INIT_CK(NULL, "pclk", &clk_p), INIT_CK(NULL, "pll2", &clk_pll2), - INIT_CK(NULL, "usb_host", &clk_usb_host), + INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), INIT_CK(NULL, "m2p0", &clk_m2p0), INIT_CK(NULL, "m2p1", &clk_m2p1), INIT_CK(NULL, "m2p2", &clk_m2p2), @@ -186,8 +186,8 @@ static unsigned long get_uart_rate(struct clk *clk) { u32 value; - value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL); - if (value & EP93XX_SYSCON_CLOCK_UARTBAUD) + value = __raw_readl(EP93XX_SYSCON_PWRCNT); + if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) return EP93XX_EXT_CLK_RATE; else return EP93XX_EXT_CLK_RATE / 2; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ae24486f858a..204dc5cbd0b8 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3]; static unsigned char gpio_int_enabled[3]; static unsigned char gpio_int_type1[3]; static unsigned char gpio_int_type2[3]; -static unsigned char gpio_int_debouce[3]; +static unsigned char gpio_int_debounce[3]; /* Port ordering is: A B F */ static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; @@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable) int port_mask = 1 << (line & 7); if (enable) - gpio_int_debouce[port] |= port_mask; + gpio_int_debounce[port] |= port_mask; else - gpio_int_debouce[port] &= ~port_mask; + gpio_int_debounce[port] &= ~port_mask; - __raw_writeb(gpio_int_debouce[port], + __raw_writeb(gpio_int_debounce[port], EP93XX_GPIO_REG(int_debounce_register_offset[port])); } EXPORT_SYMBOL(ep93xx_gpio_int_debounce); @@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void) { int gpio_irq; - vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); - vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); + vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); + vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); for (gpio_irq = gpio_to_irq(0); gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { @@ -450,10 +450,19 @@ static struct amba_device uart3_device = { }; +static struct resource ep93xx_rtc_resource[] = { + { + .start = EP93XX_RTC_PHYS_BASE, + .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device ep93xx_rtc_device = { - .name = "ep93xx-rtc", - .id = -1, - .num_resources = 0, + .name = "ep93xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), + .resource = ep93xx_rtc_resource, }; diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c deleted file mode 100644 index 8bf8d7c78f1a..000000000000 --- a/arch/arm/mach-ep93xx/edb9302.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9302.c - * Cirrus Logic EDB9302 support. - * - * Copyright (C) 2006 George Kashperko <george@chas.com.ua> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9302_flash_data = { - .width = 2, -}; - -static struct resource edb9302_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9302_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9302_flash_data, - }, - .num_resources = 1, - .resource = &edb9302_flash_resource, -}; - -static struct ep93xx_eth_data edb9302_eth_data = { - .phy_id = 1, -}; - -static void __init edb9302_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9302_flash); - - ep93xx_register_eth(&edb9302_eth_data, 1); -} - -MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") - /* Maintainer: George Kashperko <george@chas.com.ua> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9302_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c deleted file mode 100644 index a352c57c7b46..000000000000 --- a/arch/arm/mach-ep93xx/edb9302a.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9302a.c - * Cirrus Logic EDB9302A support. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9302a_flash_data = { - .width = 2, -}; - -static struct resource edb9302a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9302a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9302a_flash_data, - }, - .num_resources = 1, - .resource = &edb9302a_flash_resource, -}; - -static struct ep93xx_eth_data edb9302a_eth_data = { - .phy_id = 1, -}; - -static void __init edb9302a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9302a_flash); - - ep93xx_register_eth(&edb9302a_eth_data, 1); -} - -MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9302a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c deleted file mode 100644 index 5ab22f63a4eb..000000000000 --- a/arch/arm/mach-ep93xx/edb9307.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9307.c - * Cirrus Logic EDB9307 support. - * - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9307_flash_data = { - .width = 4, -}; - -static struct resource edb9307_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9307_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9307_flash_data, - }, - .num_resources = 1, - .resource = &edb9307_flash_resource, -}; - -static struct ep93xx_eth_data edb9307_eth_data = { - .phy_id = 1, -}; - -static void __init edb9307_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9307_flash); - - ep93xx_register_eth(&edb9307_eth_data, 1); -} - -MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") - /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9307_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c deleted file mode 100644 index 6171167d3315..000000000000 --- a/arch/arm/mach-ep93xx/edb9307a.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9307a.c - * Cirrus Logic EDB9307A support. - * - * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9307a_flash_data = { - .width = 2, -}; - -static struct resource edb9307a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9307a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9307a_flash_data, - }, - .num_resources = 1, - .resource = &edb9307a_flash_resource, -}; - -static struct ep93xx_eth_data edb9307a_eth_data = { - .phy_id = 1, -}; - -static struct i2c_board_info __initdata edb9307a_i2c_data[] = { - { - /* On-board battery backed RTC */ - I2C_BOARD_INFO("isl1208", 0x6f), - }, - /* - * The I2C signals are also routed to the Expansion Connector (J4) - */ -}; - -static void __init edb9307a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9307a_flash); - - ep93xx_register_eth(&edb9307a_eth_data, 1); - - ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data)); -} - -MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") - /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9307a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c deleted file mode 100644 index d7179f66d804..000000000000 --- a/arch/arm/mach-ep93xx/edb9312.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9312.c - * Cirrus Logic EDB9312 support. - * - * Copyright (C) 2006 Infosys Technologies Limited - * Toufeeq Hussain <toufeeq_hussain@infosys.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9312_flash_data = { - .width = 4, -}; - -static struct resource edb9312_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9312_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9312_flash_data, - }, - .num_resources = 1, - .resource = &edb9312_flash_resource, -}; - -static struct ep93xx_eth_data edb9312_eth_data = { - .phy_id = 1, -}; - -static void __init edb9312_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9312_flash); - - ep93xx_register_eth(&edb9312_eth_data, 1); -} - -MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") - /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9312_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c deleted file mode 100644 index 025af6eaca10..000000000000 --- a/arch/arm/mach-ep93xx/edb9315.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9315.c - * Cirrus Logic EDB9315 support. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9315_flash_data = { - .width = 4, -}; - -static struct resource edb9315_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9315_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9315_flash_data, - }, - .num_resources = 1, - .resource = &edb9315_flash_resource, -}; - -static struct ep93xx_eth_data edb9315_eth_data = { - .phy_id = 1, -}; - -static void __init edb9315_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9315_flash); - - ep93xx_register_eth(&edb9315_eth_data, 1); -} - -MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9315_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c deleted file mode 100644 index 4c9cc8a39f5c..000000000000 --- a/arch/arm/mach-ep93xx/edb9315a.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-ep93xx/edb9315a.c - * Cirrus Logic EDB9315A support. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static struct physmap_flash_data edb9315a_flash_data = { - .width = 2, -}; - -static struct resource edb9315a_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb9315a_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb9315a_flash_data, - }, - .num_resources = 1, - .resource = &edb9315a_flash_resource, -}; - -static struct ep93xx_eth_data edb9315a_eth_data = { - .phy_id = 1, -}; - -static void __init edb9315a_init_machine(void) -{ - ep93xx_init_devices(); - platform_device_register(&edb9315a_flash); - - ep93xx_register_eth(&edb9315a_eth_data, 1); -} - -MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .phys_io = EP93XX_APB_PHYS_BASE, - .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .timer = &ep93xx_timer, - .init_machine = edb9315a_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c new file mode 100644 index 000000000000..e9e45b92457e --- /dev/null +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -0,0 +1,217 @@ +/* + * arch/arm/mach-ep93xx/edb93xx.c + * Cirrus Logic EDB93xx Development Board support. + * + * EDB93XX, EDB9301, EDB9307A + * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * EDB9302 + * Copyright (C) 2006 George Kashperko <george@chas.com.ua> + * + * EDB9302A, EDB9315, EDB9315A + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * + * EDB9307 + * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> + * + * EDB9312 + * Copyright (C) 2006 Infosys Technologies Limited + * Toufeeq Hussain <toufeeq_hussain@infosys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct physmap_flash_data edb93xx_flash_data; + +static struct resource edb93xx_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device edb93xx_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &edb93xx_flash_data, + }, + .num_resources = 1, + .resource = &edb93xx_flash_resource, +}; + +static void __init __edb93xx_register_flash(unsigned int width, + resource_size_t start, resource_size_t size) +{ + edb93xx_flash_data.width = width; + edb93xx_flash_resource.start = start; + edb93xx_flash_resource.end = start + size - 1; + + platform_device_register(&edb93xx_flash); +} + +static void __init edb93xx_register_flash(void) +{ + if (machine_is_edb9307() || machine_is_edb9312() || + machine_is_edb9315()) { + __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); + } else { + __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); + } +} + +static struct ep93xx_eth_data edb93xx_eth_data = { + .phy_id = 1, +}; + +static struct i2c_board_info __initdata edb93xxa_i2c_data[] = { + { + I2C_BOARD_INFO("isl1208", 0x6f), + }, +}; + +static struct i2c_board_info __initdata edb93xx_i2c_data[] = { + { + I2C_BOARD_INFO("ds1337", 0x68), + }, +}; + +static void __init edb93xx_register_i2c(void) +{ + if (machine_is_edb9302a() || machine_is_edb9307a() || + machine_is_edb9315a()) { + ep93xx_register_i2c(edb93xxa_i2c_data, + ARRAY_SIZE(edb93xxa_i2c_data)); + } else if (machine_is_edb9307() || machine_is_edb9312() || + machine_is_edb9315()) { + ep93xx_register_i2c(edb93xx_i2c_data, + ARRAY_SIZE(edb93xx_i2c_data)); + } +} + +static void __init edb93xx_init_machine(void) +{ + ep93xx_init_devices(); + edb93xx_register_flash(); + ep93xx_register_eth(&edb93xx_eth_data, 1); + edb93xx_register_i2c(); +} + + +#ifdef CONFIG_MACH_EDB9301 +MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") + /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9302 +MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") + /* Maintainer: George Kashperko <george@chas.com.ua> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9302A +MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9307 +MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") + /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9307A +MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") + /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9312 +MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") + /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9315 +MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EDB9315A +MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") + /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = edb93xx_init_machine, +MACHINE_END +#endif diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 1732de7629a5..967c079180db 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -147,13 +147,27 @@ #define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) #define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) +#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000) #define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) #define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) #define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000 -#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000 +#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) +#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) +#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) +#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27) +#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17) +#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16) #define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) #define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h index 5c80c3c8158d..925b12ea0990 100644 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ b/arch/arm/mach-ep93xx/include/mach/memory.h @@ -5,6 +5,12 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H +#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) #define PHYS_OFFSET UL(0x00000000) +#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xc0000000) +#else +#error "Kconfig bug: No EP93xx PHYS_OFFSET set" +#endif #endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig deleted file mode 100644 index cddd194ac6eb..000000000000 --- a/arch/arm/mach-imx/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -menu "IMX Implementations" - depends on ARCH_IMX - -config ARCH_MX1ADS - bool "mx1ads" - depends on ARCH_IMX - select ISA - help - Say Y here if you are using the Motorola MX1ADS board - -endmenu diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile deleted file mode 100644 index b047c7e795a9..000000000000 --- a/arch/arm/mach-imx/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y += irq.o time.o dma.o generic.o clock.o - -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o - -# Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o - -# Support for blinky lights -led-y := leds.o - -obj-$(CONFIG_LEDS) += $(led-y) -led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot deleted file mode 100644 index fd72ce5b8081..000000000000 --- a/arch/arm/mach-imx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX1ADS) := 0x08008000 - diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c deleted file mode 100644 index cf332aeb942e..000000000000 --- a/arch/arm/mach-imx/clock.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/math64.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -/* - * Very simple approach: We can't disable clocks, so we do - * not need refcounting - */ - -struct clk { - struct list_head node; - const char *name; - unsigned long (*get_rate)(void); -}; - -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref) -{ - unsigned long long ll; - unsigned long quot; - - u32 mfi = (pll >> 10) & 0xf; - u32 mfn = pll & 0x3ff; - u32 mfd = (pll >> 16) & 0x3ff; - u32 pd = (pll >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - ll = 2 * (unsigned long long)f_ref * - ((mfi << 16) + (mfn << 16) / (mfd + 1)); - quot = (pd + 1) * (1 << 16); - ll += quot / 2; - do_div(ll, quot); - return (unsigned long)ll; -} - -static unsigned long imx_get_system_clk(void) -{ - u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); - - return imx_decode_pll(SPCTL0, f_ref); -} - -static unsigned long imx_get_mcu_clk(void) -{ - return imx_decode_pll(MPCTL0, CLK32 * 512); -} - -/* - * get peripheral clock 1 ( UART[12], Timer[12], PWM ) - */ -static unsigned long imx_get_perclk1(void) -{ - return imx_get_system_clk() / (((PCDR) & 0xf)+1); -} - -/* - * get peripheral clock 2 ( LCD, SD, SPI[12] ) - */ -static unsigned long imx_get_perclk2(void) -{ - return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); -} - -/* - * get peripheral clock 3 ( SSI ) - */ -static unsigned long imx_get_perclk3(void) -{ - return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); -} - -/* - * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) - */ -static unsigned long imx_get_hclk(void) -{ - return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); -} - -static struct clk clk_system_clk = { - .name = "system_clk", - .get_rate = imx_get_system_clk, -}; - -static struct clk clk_hclk = { - .name = "hclk", - .get_rate = imx_get_hclk, -}; - -static struct clk clk_mcu_clk = { - .name = "mcu_clk", - .get_rate = imx_get_mcu_clk, -}; - -static struct clk clk_perclk1 = { - .name = "perclk1", - .get_rate = imx_get_perclk1, -}; - -static struct clk clk_uart_clk = { - .name = "uart_clk", - .get_rate = imx_get_perclk1, -}; - -static struct clk clk_perclk2 = { - .name = "perclk2", - .get_rate = imx_get_perclk2, -}; - -static struct clk clk_perclk3 = { - .name = "perclk3", - .get_rate = imx_get_perclk3, -}; - -static struct clk *clks[] = { - &clk_perclk1, - &clk_perclk2, - &clk_perclk3, - &clk_system_clk, - &clk_hclk, - &clk_mcu_clk, - &clk_uart_clk, -}; - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { - if (!strcmp(p->name, id)) { - clk = p; - goto found; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->get_rate(); -} -EXPORT_SYMBOL(clk_get_rate); - -int imx_clocks_init(void) -{ - int i; - - mutex_lock(&clocks_mutex); - for (i = 0; i < ARRAY_SIZE(clks); i++) - list_add(&clks[i]->node, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} - diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c deleted file mode 100644 index 434b4ca0af67..000000000000 --- a/arch/arm/mach-imx/cpufreq.c +++ /dev/null @@ -1,315 +0,0 @@ -/* - * cpu.c: clock scaling for the iMX - * - * Copyright (C) 2000 2001, The Delft University of Technology - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com> - * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> - * - * Based on SA1100 version written by: - * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version - * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -/*#define DEBUG*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <asm/system.h> - -#include <mach/hardware.h> - -#include "generic.h" - -#ifndef __val2mfld -#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask)) -#endif -#ifndef __mfld2val -#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1))) -#endif - -#define CR_920T_CLOCK_MODE 0xC0000000 -#define CR_920T_FASTBUS_MODE 0x00000000 -#define CR_920T_ASYNC_MODE 0xC0000000 - -static u32 mpctl0_at_boot; -static u32 bclk_div_at_boot; - -static struct clk *system_clk, *mcu_clk; - -static void imx_set_async_mode(void) -{ - adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE); -} - -static void imx_set_fastbus_mode(void) -{ - adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE); -} - -static void imx_set_mpctl0(u32 mpctl0) -{ - unsigned long flags; - - if (mpctl0 == 0) { - local_irq_save(flags); - CSCR &= ~CSCR_MPEN; - local_irq_restore(flags); - return; - } - - local_irq_save(flags); - MPCTL0 = mpctl0; - CSCR |= CSCR_MPEN; - local_irq_restore(flags); -} - -/** - * imx_compute_mpctl - compute new PLL parameters - * @new_mpctl: pointer to location assigned by new PLL control register value - * @cur_mpctl: current PLL control register parameters - * @f_ref: reference source frequency Hz - * @freq: required frequency in Hz - * @relation: is one of %CPUFREQ_RELATION_L (supremum) - * and %CPUFREQ_RELATION_H (infimum) - */ -long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation) -{ - u32 mfi; - u32 mfn; - u32 mfd; - u32 pd; - unsigned long long ll; - long l; - long quot; - - /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */ - /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */ - - if (cur_mpctl) { - mfd = ((cur_mpctl >> 16) & 0x3ff) + 1; - pd = ((cur_mpctl >> 26) & 0xf) + 1; - } else { - pd=2; mfd=313; - } - - /* pd=2; mfd=313; mfi=8; mfn=183; */ - /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */ - - quot = (f_ref + (1 << 9)) >> 10; - l = (freq * pd + quot) / (2 * quot); - mfi = l >> 10; - mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10; - - mfd -= 1; - pd -= 1; - - *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16) - | ((pd & 0xf) << 26); - - ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); - quot = (pd+1) * (1<<16); - ll += quot / 2; - do_div(ll, quot); - freq = ll; - - pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n", - pd, mfd, mfi, mfn, freq); - - return freq; -} - - -static int imx_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - return 0; -} - -static unsigned int imx_get_speed(unsigned int cpu) -{ - unsigned int freq; - unsigned int cr; - unsigned int cscr; - unsigned int bclk_div; - - if (cpu) - return 0; - - cscr = CSCR; - bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1; - cr = get_cr(); - - if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) { - freq = clk_get_rate(system_clk); - freq = (freq + bclk_div/2) / bclk_div; - } else { - freq = clk_get_rate(mcu_clk); - if (cscr & CSCR_MPU_PRESC) - freq /= 2; - } - - freq = (freq + 500) / 1000; - - return freq; -} - -static int imx_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - u32 mpctl0 = 0; - u32 cscr; - unsigned long flags; - long freq; - long sysclk; - unsigned int bclk_div = bclk_div_at_boot; - - /* - * Some governors do not respects CPU and policy lower limits - * which leads to bad things (division by zero etc), ensure - * that such things do not happen. - */ - if(target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - - if(target_freq < policy->min) - target_freq = policy->min; - - freq = target_freq * 1000; - - pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", - freq, mpctl0_at_boot); - - sysclk = clk_get_rate(system_clk); - - if (freq > sysclk / bclk_div_at_boot + 1000000) { - freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation); - if (freq < 0) { - printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq); - return -EINVAL; - } - } else { - if(freq + 1000 < sysclk) { - if (relation == CPUFREQ_RELATION_L) - bclk_div = (sysclk - 1000) / freq; - else - bclk_div = (sysclk + freq + 1000) / freq; - - if(bclk_div > 16) - bclk_div = 16; - if(bclk_div < bclk_div_at_boot) - bclk_div = bclk_div_at_boot; - } - freq = (sysclk + bclk_div / 2) / bclk_div; - } - - freqs.old = imx_get_speed(0); - freqs.new = (freq + 500) / 1000; - freqs.cpu = 0; - freqs.flags = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_save(flags); - - imx_set_fastbus_mode(); - - imx_set_mpctl0(mpctl0); - - cscr = CSCR; - cscr &= ~CSCR_BCLK_DIV; - cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1); - CSCR = cscr; - - if(mpctl0) { - CSCR |= CSCR_MPLL_RESTART; - - /* Wait until MPLL is stabilized */ - while( CSCR & CSCR_MPLL_RESTART ); - - imx_set_async_mode(); - } - - local_irq_restore(flags); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n", - freq, mpctl0? "MPLL": "SPLL"); - - return 0; -} - -static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy) -{ - printk(KERN_INFO "i.MX cpu freq change driver v1.0\n"); - - if (policy->cpu != 0) - return -EINVAL; - - policy->cur = policy->min = policy->max = imx_get_speed(0); - policy->cpuinfo.min_freq = 8000; - policy->cpuinfo.max_freq = 200000; - /* Manual states, that PLL stabilizes in two CLK32 periods */ - policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32; - return 0; -} - -static struct cpufreq_driver imx_driver = { - .flags = CPUFREQ_STICKY, - .verify = imx_verify_speed, - .target = imx_set_target, - .get = imx_get_speed, - .init = imx_cpufreq_driver_init, - .name = "imx", -}; - -static int __init imx_cpufreq_init(void) -{ - bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1; - mpctl0_at_boot = 0; - - system_clk = clk_get(NULL, "system_clk"); - if (IS_ERR(system_clk)) - return PTR_ERR(system_clk); - - mcu_clk = clk_get(NULL, "mcu_clk"); - if (IS_ERR(mcu_clk)) { - clk_put(system_clk); - return PTR_ERR(mcu_clk); - } - - if((CSCR & CSCR_MPEN) && - ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE)) - mpctl0_at_boot = MPCTL0; - - return cpufreq_register_driver(&imx_driver); -} - -arch_initcall(imx_cpufreq_init); - diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c deleted file mode 100644 index 1536583eece0..000000000000 --- a/arch/arm/mach-imx/dma.c +++ /dev/null @@ -1,597 +0,0 @@ -/* - * linux/arch/arm/mach-imx/dma.c - * - * imx DMA registration and IRQ dispatching - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * 2004-03-03 Sascha Hauer <sascha@saschahauer.de> - * initial version heavily inspired by - * linux/arch/arm/mach-pxa/dma.c - * - * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Changed to support scatter gather DMA - * by taking Russell's code from RiscPC - * - * 2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Corrected error handling code. - * - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/errno.h> - -#include <asm/scatterlist.h> -#include <asm/system.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma.h> -#include <mach/imx-dma.h> - -struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -/* - * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation - * @dma_ch: i.MX DMA channel number - * @lastcount: number of bytes transferred during last transfer - * - * Functions prepares DMA controller for next sg data chunk transfer. - * The @lastcount argument informs function about number of bytes transferred - * during last block. Zero value can be used for @lastcount to setup DMA - * for the first chunk. - */ -static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned int nextcount; - unsigned int nextaddr; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return 0; - } - - imxdma->resbytes -= lastcount; - - if (!imxdma->sg) { - pr_debug("imxdma%d: no sg data\n", dma_ch); - return 0; - } - - imxdma->sgbc += lastcount; - if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) { - if ((imxdma->sgcount <= 1) || !imxdma->resbytes) { - pr_debug("imxdma%d: sg transfer limit reached\n", - dma_ch); - imxdma->sgcount=0; - imxdma->sg = NULL; - return 0; - } else { - imxdma->sgcount--; - imxdma->sg++; - imxdma->sgbc = 0; - } - } - nextcount = imxdma->sg->length - imxdma->sgbc; - nextaddr = imxdma->sg->dma_address + imxdma->sgbc; - - if(imxdma->resbytes < nextcount) - nextcount = imxdma->resbytes; - - if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - DAR(dma_ch) = nextaddr; - else - SAR(dma_ch) = nextaddr; - - CNTR(dma_ch) = nextcount; - pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n", - dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch)); - - return nextcount; -} - -/* - * imx_dma_setup_sg_base - scatter-gather DMA emulation - * @dma_ch: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * - * Functions sets up i.MX DMA state for emulated scatter-gather transfer - * and sets up channel registers to be ready for the first chunk - */ -static int -imx_dma_setup_sg_base(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = sg; - imxdma->sgcount = sgcount; - imxdma->sgbc = 0; - return imx_dma_sg_next(dma_ch, 0); -} - -/** - * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer - * @dma_ch: i.MX DMA channel number - * @dma_address: the DMA/physical memory address of the linear data block - * to transfer - * @dma_length: length of the data block in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function setups DMA channel source and destination addresses for transfer - * specified by provided parameters. The scatter-gather emulation is disabled, - * because linear data block - * form the physical address range is transferred. - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = NULL; - imxdma->sgcount = 0; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!dma_address) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", - dma_ch); - return -EINVAL; - } - - if (!dma_length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", - dma_ch); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n", - dma_ch, (unsigned int)dma_address, dma_length, - dev_addr); - SAR(dma_ch) = dev_addr; - DAR(dma_ch) = (unsigned int)dma_address; - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n", - dma_ch, (unsigned int)dma_address, dma_length, - dev_addr); - SAR(dma_ch) = (unsigned int)dma_address; - DAR(dma_ch) = dev_addr; - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", - dma_ch); - return -EINVAL; - } - - CNTR(dma_ch) = dma_length; - - return 0; -} - -/** - * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer - * @dma_ch: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * @dma_length: total length of the transfer request in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function sets up DMA channel state and registers to be ready for transfer - * specified by provided parameters. The scatter-gather emulation is set up - * according to the parameters. - * - * The full preparation of the transfer requires setup of more register - * by the caller before imx_dma_enable() can be called. - * - * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes - * - * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx - * - * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical - * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified - * - * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x - * - * The typical setup for %DMA_MODE_WRITE is specified by next options combination - * - * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x - * - * Be careful here and do not mistakenly mix source and target device - * port sizes constants, they are really different: - * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, - * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode) -{ - int res; - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - imxdma->sg = NULL; - imxdma->sgcount = 0; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n", - dma_ch); - return -EINVAL; - } - - if (!sg->length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", - dma_ch); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n", - dma_ch, sg, sgcount, dma_length, dev_addr); - SAR(dma_ch) = dev_addr; - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n", - dma_ch, sg, sgcount, dma_length, dev_addr); - DAR(dma_ch) = dev_addr; - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", - dma_ch); - return -EINVAL; - } - - res = imx_dma_setup_sg_base(dma_ch, sg, sgcount); - if (res <= 0) { - printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch); - return -EINVAL; - } - - return 0; -} - -/** - * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers - * @dma_ch: i.MX DMA channel number - * @irq_handler: the pointer to the function called if the transfer - * ends successfully - * @err_handler: the pointer to the function called if the premature - * end caused by error occurs - * @data: user specified value to be passed to the handlers - */ -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), - void *data) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return -ENODEV; - } - - local_irq_save(flags); - DISR = (1 << dma_ch); - imxdma->irq_handler = irq_handler; - imxdma->err_handler = err_handler; - imxdma->data = data; - local_irq_restore(flags); - return 0; -} - -/** - * imx_dma_enable - function to start i.MX DMA channel operation - * @dma_ch: i.MX DMA channel number - * - * The channel has to be allocated by driver through imx_dma_request() - * or imx_dma_request_by_prio() function. - * The transfer parameters has to be set to the channel registers through - * call of the imx_dma_setup_single() or imx_dma_setup_sg() function - * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to - * be set prior this function call by the channel user. - */ -void imx_dma_enable(imx_dmach_t dma_ch) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_enable\n", dma_ch); - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - DISR = (1 << dma_ch); - DIMR &= ~(1 << dma_ch); - CCR(dma_ch) |= CCR_CEN; - local_irq_restore(flags); -} - -/** - * imx_dma_disable - stop, finish i.MX DMA channel operatin - * @dma_ch: i.MX DMA channel number - */ -void imx_dma_disable(imx_dmach_t dma_ch) -{ - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_disable\n", dma_ch); - - local_irq_save(flags); - DIMR |= (1 << dma_ch); - CCR(dma_ch) &= ~CCR_CEN; - DISR = (1 << dma_ch); - local_irq_restore(flags); -} - -/** - * imx_dma_request - request/allocate specified channel number - * @dma_ch: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - */ -int imx_dma_request(imx_dmach_t dma_ch, const char *name) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - unsigned long flags; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - if (dma_ch >= IMX_DMA_CHANNELS) { - printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __func__, dma_ch); - return -EINVAL; - } - - local_irq_save(flags); - if (imxdma->name) { - local_irq_restore(flags); - return -ENODEV; - } - - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - local_irq_restore(flags); - return 0; -} - -/** - * imx_dma_free - release previously acquired channel - * @dma_ch: i.MX DMA channel number - */ -void imx_dma_free(imx_dmach_t dma_ch) -{ - unsigned long flags; - struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - - if (!imxdma->name) { - printk(KERN_CRIT - "%s: trying to free channel %d which is already freed\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - /* Disable interrupts */ - DIMR |= (1 << dma_ch); - CCR(dma_ch) &= ~CCR_CEN; - imxdma->name = NULL; - local_irq_restore(flags); -} - -/** - * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority - * @name: the driver/caller own non-%NULL identification - * @prio: one of the hardware distinguished priority level: - * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW - * - * This function tries to find free channel in the specified priority group - * if the priority cannot be achieved it tries to look for free channel - * in the higher and then even lower priority groups. - * - * Return value: If there is no free channel to allocate, -%ENODEV is returned. - * On successful allocation channel is returned. - */ -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio) -{ - int i; - int best; - - switch (prio) { - case (DMA_PRIO_HIGH): - best = 8; - break; - case (DMA_PRIO_MEDIUM): - best = 4; - break; - case (DMA_PRIO_LOW): - default: - best = 0; - break; - } - - for (i = best; i < IMX_DMA_CHANNELS; i++) { - if (!imx_dma_request(i, name)) { - return i; - } - } - - for (i = best - 1; i >= 0; i--) { - if (!imx_dma_request(i, name)) { - return i; - } - } - - printk(KERN_ERR "%s: no free DMA channel found\n", __func__); - - return -ENODEV; -} - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, disr = DISR; - struct imx_dma_channel *channel; - unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR; - int errcode; - - DISR = disr & err_mask; - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if(!(err_mask & (1 << i))) - continue; - channel = &imx_dma_channels[i]; - errcode = 0; - - if (DBTOSR & (1 << i)) { - DBTOSR = (1 << i); - errcode |= IMX_DMA_ERR_BURST; - } - if (DRTOSR & (1 << i)) { - DRTOSR = (1 << i); - errcode |= IMX_DMA_ERR_REQUEST; - } - if (DSESR & (1 << i)) { - DSESR = (1 << i); - errcode |= IMX_DMA_ERR_TRANSFER; - } - if (DBOSR & (1 << i)) { - DBOSR = (1 << i); - errcode |= IMX_DMA_ERR_BUFFER; - } - - /* - * The cleaning of @sg field would be questionable - * there, because its value can help to compute - * remaining/transferred bytes count in the handler - */ - /*imx_dma_channels[i].sg = NULL;*/ - - if (channel->name && channel->err_handler) { - channel->err_handler(i, channel->data, errcode); - continue; - } - - imx_dma_channels[i].sg = NULL; - - printk(KERN_WARNING - "DMA timeout on channel %d (%s) -%s%s%s%s\n", - i, channel->name, - errcode&IMX_DMA_ERR_BURST? " burst":"", - errcode&IMX_DMA_ERR_REQUEST? " request":"", - errcode&IMX_DMA_ERR_TRANSFER? " transfer":"", - errcode&IMX_DMA_ERR_BUFFER? " buffer":""); - } - return IRQ_HANDLED; -} - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, disr = DISR; - - pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", - disr); - - DISR = disr; - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (disr & (1 << i)) { - struct imx_dma_channel *channel = &imx_dma_channels[i]; - if (channel->name) { - if (imx_dma_sg_next(i, CNTR(i))) { - CCR(i) &= ~CCR_CEN; - mb(); - CCR(i) |= CCR_CEN; - } else { - if (channel->irq_handler) - channel->irq_handler(i, - channel->data); - } - } else { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", i); - } - } - } - return IRQ_HANDLED; -} - -static int __init imx_dma_init(void) -{ - int ret; - int i; - - /* reset DMA module */ - DCR = DCR_DRST; - - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n"); - free_irq(DMA_INT, NULL); - } - - /* enable DMA module */ - DCR = DCR_DEN; - - /* clear all interrupts */ - DISR = (1 << IMX_DMA_CHANNELS) - 1; - - /* enable interrupts */ - DIMR = (1 << IMX_DMA_CHANNELS) - 1; - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - imx_dma_channels[i].sg = NULL; - imx_dma_channels[i].dma_num = i; - } - - return ret; -} - -arch_initcall(imx_dma_init); - -EXPORT_SYMBOL(imx_dma_setup_single); -EXPORT_SYMBOL(imx_dma_setup_sg); -EXPORT_SYMBOL(imx_dma_setup_handlers); -EXPORT_SYMBOL(imx_dma_enable); -EXPORT_SYMBOL(imx_dma_disable); -EXPORT_SYMBOL(imx_dma_request); -EXPORT_SYMBOL(imx_dma_free); -EXPORT_SYMBOL(imx_dma_request_by_prio); -EXPORT_SYMBOL(imx_dma_channels); diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c deleted file mode 100644 index 05f1739ee127..000000000000 --- a/arch/arm/mach-imx/generic.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * arch/arm/mach-imx/generic.c - * - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <asm/errno.h> -#include <mach/hardware.h> -#include <mach/imx-regs.h> - -#include <asm/mach/map.h> -#include <mach/mmc.h> -#include <mach/gpio.h> - -unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG]; - -void imx_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int tmp; - - /* Pullup enable */ - if(gpio_mode & GPIO_PUEN) - PUEN(port) |= (1<<pin); - else - PUEN(port) &= ~(1<<pin); - - /* Data direction */ - if(gpio_mode & GPIO_OUT) - DDIR(port) |= 1<<pin; - else - DDIR(port) &= ~(1<<pin); - - /* Primary / alternate function */ - if(gpio_mode & GPIO_AF) - GPR(port) |= (1<<pin); - else - GPR(port) &= ~(1<<pin); - - /* use as gpio? */ - if(gpio_mode & GPIO_GIUS) - GIUS(port) |= (1<<pin); - else - GIUS(port) &= ~(1<<pin); - - /* Output / input configuration */ - /* FIXME: I'm not very sure about OCR and ICONF, someone - * should have a look over it - */ - if(pin<16) { - tmp = OCR1(port); - tmp &= ~( 3<<(pin*2)); - tmp |= (ocr << (pin*2)); - OCR1(port) = tmp; - - ICONFA1(port) &= ~( 3<<(pin*2)); - ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - ICONFB1(port) &= ~( 3<<(pin*2)); - ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - } else { - tmp = OCR2(port); - tmp &= ~( 3<<((pin-16)*2)); - tmp |= (ocr << ((pin-16)*2)); - OCR2(port) = tmp; - - ICONFA2(port) &= ~( 3<<((pin-16)*2)); - ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2); - ICONFB2(port) &= ~( 3<<((pin-16)*2)); - ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2); - } -} - -EXPORT_SYMBOL(imx_gpio_mode); - -int imx_gpio_request(unsigned gpio, const char *label) -{ - if(gpio >= (GPIO_PORT_MAX + 1) * 32) { - printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n", - gpio, label ? label : "?"); - return -EINVAL; - } - - if(test_and_set_bit(gpio, imx_gpio_alloc_map)) { - printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n", - gpio, label ? label : "?"); - return -EBUSY; - } - - return 0; -} - -EXPORT_SYMBOL(imx_gpio_request); - -void imx_gpio_free(unsigned gpio) -{ - if(gpio >= (GPIO_PORT_MAX + 1) * 32) - return; - - clear_bit(gpio, imx_gpio_alloc_map); -} - -EXPORT_SYMBOL(imx_gpio_free); - -int imx_gpio_direction_input(unsigned gpio) -{ - imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR); - return 0; -} - -EXPORT_SYMBOL(imx_gpio_direction_input); - -int imx_gpio_direction_output(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); - imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR); - return 0; -} - -EXPORT_SYMBOL(imx_gpio_direction_output); - -int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label) -{ - const int *p = pin_list; - int i; - unsigned gpio; - unsigned mode; - - for (i = 0; i < count; i++) { - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); - - if (gpio >= (GPIO_PORT_MAX + 1) * 32) - goto setup_error; - - if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE) - imx_gpio_free(gpio); - else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC)) - if (imx_gpio_request(gpio, label)) - if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) - goto setup_error; - - if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY | - IMX_GPIO_ALLOC_MODE_RELEASE))) - imx_gpio_mode(gpio | mode); - - p++; - } - return 0; - -setup_error: - if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC | - IMX_GPIO_ALLOC_MODE_TRY_ALLOC)) - return -EINVAL; - - while (p != pin_list) { - p--; - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - imx_gpio_free(gpio); - } - - return -EINVAL; -} - -EXPORT_SYMBOL(imx_gpio_setup_multiple_pins); - -void __imx_gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value_inline(gpio, value); -} - -EXPORT_SYMBOL(__imx_gpio_set_value); - -int imx_gpio_to_irq(unsigned gpio) -{ - return IRQ_GPIOA(0) + gpio; -} - -EXPORT_SYMBOL(imx_gpio_to_irq); - -int imx_irq_to_gpio(unsigned irq) -{ - if (irq < IRQ_GPIOA(0)) - return -EINVAL; - return irq - IRQ_GPIOA(0); -} - -EXPORT_SYMBOL(imx_irq_to_gpio); - -static struct resource imx_mmc_resources[] = { - [0] = { - .start = 0x00214000, - .end = 0x002140FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (SDHC_INT), - .end = (SDHC_INT), - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 imxmmmc_dmamask = 0xffffffffUL; - -static struct platform_device imx_mmc_device = { - .name = "imx-mmc", - .id = 0, - .dev = { - .dma_mask = &imxmmmc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(imx_mmc_resources), - .resource = imx_mmc_resources, -}; - -void __init imx_set_mmc_info(struct imxmmc_platform_data *info) -{ - imx_mmc_device.dev.platform_data = info; -} - -static struct platform_device *devices[] __initdata = { - &imx_mmc_device, -}; - -static struct map_desc imx_io_desc[] __initdata = { - { - .virtual = IMX_IO_BASE, - .pfn = __phys_to_pfn(IMX_IO_PHYS), - .length = IMX_IO_SIZE, - .type = MT_DEVICE - } -}; - -void __init -imx_map_io(void) -{ - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); -} - -static int __init imx_init(void) -{ - return platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -subsys_initcall(imx_init); diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h deleted file mode 100644 index e91003e4bef3..000000000000 --- a/arch/arm/mach-imx/generic.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/arch/arm/mach-imx/generic.h - * - * Author: Sascha Hauer <sascha@saschahauer.de> - * Copyright: Synertronixx GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -extern void __init imx_map_io(void); -extern void __init imx_init_irq(void); - -struct sys_timer; -extern struct sys_timer imx_timer; diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S deleted file mode 100644 index 87802bbfe633..000000000000 --- a/arch/arm/mach-imx/include/mach/debug-macro.S +++ /dev/null @@ -1,34 +0,0 @@ -/* arch/arm/mach-imx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00000000 @ physical - movne \rx, #0xe0000000 @ virtual - orreq \rx, \rx, #0x00200000 @ physical - orr \rx, \rx, #0x00006000 @ UART1 offset - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h deleted file mode 100644 index 621ff2c730f2..000000000000 --- a/arch/arm/mach-imx/include/mach/dma.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} imx_dma_prio; - -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20+(x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S deleted file mode 100644 index e4db679f7766..000000000000 --- a/arch/arm/mach-imx/include/mach/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for iMX-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/hardware.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#define AITC_NIVECSR 0x40 - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(IMX_AITC_BASE) - @ Load offset & priority of the highest priority - @ interrupt pending. - ldr \irqstat, [\base, #AITC_NIVECSR] - @ Shift off the priority leaving the offset or - @ "interrupt number", use arithmetic shift to - @ transform illegal source (0xffff) as -1 - mov \irqnr, \irqstat, asr #16 - adds \tmp, \irqnr, #1 - .endm diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h deleted file mode 100644 index 6c2942f82922..000000000000 --- a/arch/arm/mach-imx/include/mach/gpio.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef _IMX_GPIO_H - -#include <linux/kernel.h> -#include <mach/hardware.h> -#include <mach/imx-regs.h> - -#define IMX_GPIO_ALLOC_MODE_NORMAL 0 -#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1 -#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2 -#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4 -#define IMX_GPIO_ALLOC_MODE_RELEASE 8 - -extern int imx_gpio_request(unsigned gpio, const char *label); - -extern void imx_gpio_free(unsigned gpio); - -extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label); - -extern int imx_gpio_direction_input(unsigned gpio); - -extern int imx_gpio_direction_output(unsigned gpio, int value); - -extern void __imx_gpio_set_value(unsigned gpio, int value); - -static inline int imx_gpio_get_value(unsigned gpio) -{ - return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK)); -} - -static inline void imx_gpio_set_value_inline(unsigned gpio, int value) -{ - unsigned long flags; - - raw_local_irq_save(flags); - if(value) - DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK)); - else - DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK)); - raw_local_irq_restore(flags); -} - -static inline void imx_gpio_set_value(unsigned gpio, int value) -{ - if(__builtin_constant_p(gpio)) - imx_gpio_set_value_inline(gpio, value); - else - __imx_gpio_set_value(gpio, value); -} - -extern int imx_gpio_to_irq(unsigned gpio); - -extern int imx_irq_to_gpio(unsigned irq); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions - * to allow future extension of GPIO logic. - */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return imx_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - might_sleep(); - - imx_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return imx_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return imx_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return imx_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); -} - -#include <asm-generic/gpio.h> /* cansleep wrappers */ - -static inline int gpio_to_irq(unsigned gpio) -{ - return imx_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return imx_irq_to_gpio(irq); -} - - -#endif diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h deleted file mode 100644 index c73e9e724c75..000000000000 --- a/arch/arm/mach-imx/include/mach/hardware.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/hardware.h - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> -#include "imx-regs.h" - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) - -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -#endif - -/* - * Memory map - */ - -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE 0xe0000000 - -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 -#define IMX_CS0_VIRT 0xe8000000 - -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 -#define IMX_CS1_VIRT 0xea000000 - -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 -#define IMX_CS2_VIRT 0xeb000000 - -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 -#define IMX_CS3_VIRT 0xec000000 - -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 -#define IMX_CS4_VIRT 0xed000000 - -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 -#define IMX_CS5_VIRT 0xee000000 - -#define IMX_FB_VIRT 0xF1000000 -#define IMX_FB_SIZE (256*1024) - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) - -#ifndef __ASSEMBLY__ -/* - * Handy routine to set GPIO functions - */ -extern void imx_gpio_mode( int gpio_mode ); - -#endif - -#define MAXIRQNUM 62 -#define MAXFIQNUM 62 -#define MAXSWINUM 62 - -/* - * Use SDRAM for memory - */ -#define MEM_SIZE 0x01000000 - -#ifdef CONFIG_ARCH_MX1ADS -#include "mx1ads.h" -#endif - -#endif diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h deleted file mode 100644 index bbe54df7f0de..000000000000 --- a/arch/arm/mach-imx/include/mach/imx-dma.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <mach/dma.h> - -#ifndef __ASM_ARCH_IMX_DMA_H -#define __ASM_ARCH_IMX_DMA_H - -#define IMX_DMA_CHANNELS 11 - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @sgbc: counter of processed bytes in the actual read/written chunk - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void *data; - unsigned int dma_mode; - struct scatterlist *sg; - unsigned int sgbc; - unsigned int sgcount; - unsigned int resbytes; - int dma_num; -}; - -extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -#define IMX_DMA_ERR_BURST 1 -#define IMX_DMA_ERR_REQUEST 2 -#define IMX_DMA_ERR_TRANSFER 4 -#define IMX_DMA_ERR_BUFFER 8 - -/* The type to distinguish channel numbers parameter from ordinal int type */ -typedef int imx_dmach_t; - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_MASK 1 - -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -void imx_dma_enable(imx_dmach_t dma_ch); - -void imx_dma_disable(imx_dmach_t dma_ch); - -int imx_dma_request(imx_dmach_t dma_ch, const char *name); - -void imx_dma_free(imx_dmach_t dma_ch); - -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio); - - -#endif /* _ASM_ARCH_IMX_DMA_H */ diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h deleted file mode 100644 index 490297fc0e38..000000000000 --- a/arch/arm/mach-imx/include/mach/imx-regs.h +++ /dev/null @@ -1,376 +0,0 @@ -#ifndef _IMX_REGS_H -#define _IMX_REGS_H -/* ------------------------------------------------------------------------ - * Motorola IMX system registers - * ------------------------------------------------------------------------ - * - */ - -/* - * Register BASEs, based on OFFSETs - * - */ -#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) -#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) -#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) -#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) -#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) -#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) -#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) -#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) -#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) -#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) -#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) -#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) -#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) -#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) -#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) -#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE) -#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) -#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) -#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) -#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) -#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) -#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) -#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) -#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) -#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) -#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) - -/* PLL registers */ -#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SPLL_RESTART (1<<22) -#define CSCR_MPLL_RESTART (1<<21) -#define CSCR_SYSTEM_SEL (1<<16) -#define CSCR_BCLK_DIV (0xf<<10) -#define CSCR_MPU_PRESC (1<<15) -#define CSCR_SPEN (1<<1) -#define CSCR_MPEN (1<<0) - -#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ -#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ -#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ -#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ -#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) -#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) -#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) -#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) -#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) -#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) -#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) -#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) -#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) -#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) -#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) -#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) -#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) -#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) -#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) -#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) -#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) - -#define GPIO_PORT_MAX 3 - -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_MASK (0x3 << 5) - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORTA (0<<5) -#define GPIO_PORTB (1<<5) -#define GPIO_PORTC (2<<5) -#define GPIO_PORTD (3<<5) - -#define GPIO_OUT (1<<7) -#define GPIO_IN (0<<7) -#define GPIO_PUEN (1<<8) - -#define GPIO_PF (0<<9) -#define GPIO_AF (1<<9) - -#define GPIO_OCR_SHIFT 10 -#define GPIO_OCR_MASK (3<<10) -#define GPIO_AIN (0<<10) -#define GPIO_BIN (1<<10) -#define GPIO_CIN (2<<10) -#define GPIO_DR (3<<10) - -#define GPIO_AOUT_SHIFT 12 -#define GPIO_AOUT_MASK (3<<12) -#define GPIO_AOUT (0<<12) -#define GPIO_AOUT_ISR (1<<12) -#define GPIO_AOUT_0 (2<<12) -#define GPIO_AOUT_1 (3<<12) - -#define GPIO_BOUT_SHIFT 14 -#define GPIO_BOUT_MASK (3<<14) -#define GPIO_BOUT (0<<14) -#define GPIO_BOUT_ISR (1<<14) -#define GPIO_BOUT_0 (2<<14) -#define GPIO_BOUT_1 (3<<14) - -#define GPIO_GIUS (1<<16) - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) -#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) -#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) -#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) -#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) -#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) -#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) -#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) -#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) -#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) -#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) -#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) -#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) -#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) -#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) -#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) -#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) -#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) -#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) -#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) -#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) -#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) -#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) -#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) -#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) -#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) -#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) -#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) -#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) -#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) -#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) -#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) -#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) -#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) -#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) -#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) -#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) -#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) -#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) -#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) -#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) -#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) -#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) -#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) -#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) -#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) -#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) -#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) -#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) -#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) -#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) -#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) -#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) -#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) -#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) -#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) -#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) -#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) -#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) -#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) -#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) -#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) -#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) -#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) -#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) -#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) -#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) -#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) -#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) -#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) -#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) -#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) -#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) -#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) -#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) -#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) -#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) -#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) -#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) -#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) -#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) -#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) -#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) -#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) -#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) -#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) -#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) -#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) -#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) -#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) -#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) -#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) -#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) -#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) -#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) -#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) -#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) -#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) -#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) -#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) -#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) -#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) -#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) -#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) -#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) -#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) -#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) -#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) -#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) -#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) -#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) -#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) -#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) -#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) -#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) -#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) -#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) -#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) -#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) -#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) -#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) -#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) - -/* - * PWM controller - */ -#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */ -#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */ -#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */ -#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */ - -#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */ -#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */ -#define PWMC_SWR (0x01<<16) /* Software Reset */ -#define PWMC_CLKSRC (0x01<<15) /* Clock Source */ -#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */ -#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */ -#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */ -#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */ -#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */ -#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */ - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ - -/* - * DMA Controller - */ -#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ -#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ -#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ -#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ -#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ -#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ -#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ -#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ -#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ -#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ -#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ -#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ -#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ -#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ -#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ -#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ -#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ -#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ -#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ -#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ -#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ -#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff ) -#define CNTR_CNT(x) ((x) & 0xffffff ) -#define CCR_DMOD_LINEAR ( 0x0 << 12 ) -#define CCR_DMOD_2D ( 0x1 << 12 ) -#define CCR_DMOD_FIFO ( 0x2 << 12 ) -#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) -#define CCR_SMOD_LINEAR ( 0x0 << 10 ) -#define CCR_SMOD_2D ( 0x1 << 10 ) -#define CCR_SMOD_FIFO ( 0x2 << 10 ) -#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 ( 0x0 << 6 ) -#define CCR_DSIZ_8 ( 0x1 << 6 ) -#define CCR_DSIZ_16 ( 0x2 << 6 ) -#define CCR_SSIZ_32 ( 0x0 << 4 ) -#define CCR_SSIZ_8 ( 0x1 << 4 ) -#define CCR_SSIZ_16 ( 0x2 << 4 ) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * Interrupt controller - */ - -#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00) -#define INTCNTL_FIAD (1<<19) -#define INTCNTL_NIAD (1<<20) - -#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04) -#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08) -#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c) -#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10) -#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14) - -/* - * General purpose timers - */ -#define IMX_TCTL(x) __REG( 0x00 + (x)) -#define TCTL_SWR (1<<15) -#define TCTL_FRR (1<<8) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_OM (1<<5) -#define TCTL_IRQEN (1<<4) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_16 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) -#define TCTL_TEN (1<<0) - -#define IMX_TPRER(x) __REG( 0x04 + (x)) -#define IMX_TCMP(x) __REG( 0x08 + (x)) -#define IMX_TCR(x) __REG( 0x0C + (x)) -#define IMX_TCN(x) __REG( 0x10 + (x)) -#define IMX_TSTAT(x) __REG( 0x14 + (x)) -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -#endif // _IMX_REGS_H diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h deleted file mode 100644 index d54eb1d48026..000000000000 --- a/arch/arm/mach-imx/include/mach/imx-uart.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - void (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -#endif diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h deleted file mode 100644 index 67812c5ac1f9..000000000000 --- a/arch/arm/mach-imx/include/mach/irqs.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ARM_IRQS_H__ -#define __ARM_IRQS_H__ - -/* Use the imx definitions */ -#include <mach/hardware.h> - -/* - * IMX Interrupt numbers - * - */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 - -#define IMX_IRQS (64) - -/* note: the IMX has four gpio ports (A-D), but only - * the following pins are connected to the outside - * world: - * - * PORT A: bits 0-31 - * PORT B: bits 8-31 - * PORT C: bits 3-17 - * PORT D: bits 6-31 - * - * We map these interrupts straight on. As a result we have - * several holes in the interrupt mapping. We do this for two - * reasons: - * - mapping the interrupts without holes would get - * far more complicated - * - Motorola could well decide to bring some processor - * with more pins connected - */ - -#define IRQ_GPIOA(x) (IMX_IRQS + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5) - -/* all normal IRQs can be FIQs */ -#define FIQ_START 0 -/* switch betwean IRQ and FIQ */ -extern int imx_set_irq_fiq(unsigned int irq, unsigned int type); - -#define NR_IRQS (IRQ_GPIOD(32) + 1) -#define IRQ_GPIO(x) -#endif diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h deleted file mode 100644 index 4712f354dcca..000000000000 --- a/arch/arm/mach-imx/include/mach/mmc.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include <linux/mmc/host.h> - -struct device; - -struct imxmmc_platform_data { - int (*card_present)(struct device *); - int (*get_ro)(struct device *); -}; - -extern void imx_set_mmc_info(struct imxmmc_platform_data *info); - -#endif diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h deleted file mode 100644 index def05d510eb3..000000000000 --- a/arch/arm/mach-imx/include/mach/mx1ads.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/mx1ads.h - * - * Copyright (C) 2004 Robert Schwebel, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_MX1ADS_H -#define __ASM_ARCH_MX1ADS_H - -/* ------------------------------------------------------------------------ */ -/* Memory Map for the M9328MX1ADS (MX1ADS) Board */ -/* ------------------------------------------------------------------------ */ - -#define MX1ADS_FLASH_PHYS 0x10000000 -#define MX1ADS_FLASH_SIZE (16*1024*1024) - -#define IMX_FB_PHYS (0x0C000000 - 0x40000) - -#define CLK32 32000 - -#endif /* __ASM_ARCH_MX1ADS_H */ diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h deleted file mode 100644 index 4186430feecf..000000000000 --- a/arch/arm/mach-imx/include/mach/spi_imx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * arch/arm/mach-imx/include/mach/spi_imx.h - * - * Copyright (C) 2006 SWAPP - * Andrea Paterniani <a.paterniani@swapp-eng.it> - * - * Initial version inspired by: - * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef SPI_IMX_H_ -#define SPI_IMX_H_ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects - 1. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. - * @enable_dma: if true enables DMA driven transfers. -*/ -struct spi_imx_master { - u8 num_chipselect; - u8 enable_dma:1; -}; -/*-------------------------------------------------------------------------*/ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_chip - spi_board_info.controller_data for SPI - * slave devices, copied to spi_device.controller_data. - * @enable_loopback : used for test purpouse to internally connect RX and TX - * sections. - * @enable_dma : enables dma transfer (provided that controller driver has - * dma enabled too). - * @ins_ss_pulse : enable /SS pulse insertion between SPI burst. - * @bclk_wait : number of bclk waits between each bits_per_word SPI burst. - * @cs_control : function pointer to board-specific function to assert/deassert - * I/O port to control HW generation of devices chip-select. -*/ -struct spi_imx_chip { - u8 enable_loopback:1; - u8 enable_dma:1; - u8 ins_ss_pulse:1; - u16 bclk_wait:15; - void (*cs_control)(u32 control); -}; - -/* Chip-select state */ -#define SPI_CS_ASSERT (1 << 0) -#define SPI_CS_DEASSERT (1 << 1) -/*-------------------------------------------------------------------------*/ - - -#endif /* SPI_IMX_H_*/ diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h deleted file mode 100644 index 70523e67a8f6..000000000000 --- a/arch/arm/mach-imx/include/mach/uncompress.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * arch/arm/mach-imxads/include/mach/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define UART1_BASE 0x206000 -#define UART2_BASE 0x207000 -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ - unsigned long serial_port; - - do { - serial_port = UART1_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - serial_port = UART2_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - return; - } while(0); - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c deleted file mode 100644 index 531b95deadc0..000000000000 --- a/arch/arm/mach-imx/irq.c +++ /dev/null @@ -1,311 +0,0 @@ -/* - * linux/arch/arm/mach-imx/irq.c - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * 03/03/2004 Sascha Hauer <sascha@saschahauer.de> - * Copied from the motorola bsp package and added gpio demux - * interrupt handler - */ - -#include <linux/init.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -/* - * - * We simply use the ENABLE DISABLE registers inside of the IMX - * to turn on/off specific interrupts. - * - */ - -#define INTCNTL_OFF 0x00 -#define NIMASK_OFF 0x04 -#define INTENNUM_OFF 0x08 -#define INTDISNUM_OFF 0x0C -#define INTENABLEH_OFF 0x10 -#define INTENABLEL_OFF 0x14 -#define INTTYPEH_OFF 0x18 -#define INTTYPEL_OFF 0x1C -#define NIPRIORITY_OFF(x) (0x20+4*(7-(x))) -#define NIVECSR_OFF 0x40 -#define FIVECSR_OFF 0x44 -#define INTSRCH_OFF 0x48 -#define INTSRCL_OFF 0x4C -#define INTFRCH_OFF 0x50 -#define INTFRCL_OFF 0x54 -#define NIPNDH_OFF 0x58 -#define NIPNDL_OFF 0x5C -#define FIPNDH_OFF 0x60 -#define FIPNDL_OFF 0x64 - -#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE) -#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF) -#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF) -#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF) -#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF) -#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF) -#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF) -#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF) -#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF) -#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x)) -#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF) -#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF) -#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF) -#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF) -#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF) -#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF) -#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF) -#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF) -#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF) -#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF) - -#if 0 -#define DEBUG_IRQ(fmt...) printk(fmt) -#else -#define DEBUG_IRQ(fmt...) do { } while (0) -#endif - -static void -imx_mask_irq(unsigned int irq) -{ - __raw_writel(irq, IMX_AITC_INTDISNUM); -} - -static void -imx_unmask_irq(unsigned int irq) -{ - __raw_writel(irq, IMX_AITC_INTENNUM); -} - -#ifdef CONFIG_FIQ -int imx_set_irq_fiq(unsigned int irq, unsigned int type) -{ - unsigned int irqt; - - if (irq >= IMX_IRQS) - return -EINVAL; - - if (irq < IMX_IRQS / 2) { - irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL); - } else { - irq -= IMX_IRQS / 2; - irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH); - } - - return 0; -} -EXPORT_SYMBOL(imx_set_irq_fiq); -#endif /* CONFIG_FIQ */ - -static int -imx_gpio_irq_type(unsigned int _irq, unsigned int type) -{ - unsigned int irq_type = 0, irq, reg, bit; - - irq = _irq - IRQ_GPIOA(0); - reg = irq >> 5; - bit = 1 << (irq % 32); - - if (type == IRQ_TYPE_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - GPIOs set to alternate function during probe */ - /* TODO: support probe */ -// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) & -// GPIO_bit(gpio)) -// return 0; -// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) -// return 0; -// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - GIUS(reg) |= bit; - DDIR(reg) &= ~(bit); - - DEBUG_IRQ("setting type of irq %d to ", _irq); - - if (type & IRQ_TYPE_EDGE_RISING) { - DEBUG_IRQ("rising edges\n"); - irq_type = 0x0; - } - if (type & IRQ_TYPE_EDGE_FALLING) { - DEBUG_IRQ("falling edges\n"); - irq_type = 0x1; - } - if (type & IRQ_TYPE_LEVEL_LOW) { - DEBUG_IRQ("low level\n"); - irq_type = 0x3; - } - if (type & IRQ_TYPE_LEVEL_HIGH) { - DEBUG_IRQ("high level\n"); - irq_type = 0x2; - } - - if (irq % 32 < 16) { - ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) | - (irq_type << ((irq % 16) * 2)); - } else { - ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) | - (irq_type << ((irq % 16) * 2)); - } - - return 0; - -} - -static void -imx_gpio_ack_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32); -} - -static void -imx_gpio_mask_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32)); -} - -static void -imx_gpio_unmask_irq(unsigned int irq) -{ - DEBUG_IRQ("%s: irq %d\n", __func__, irq); - IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32); -} - -static void -imx_gpio_handler(unsigned int mask, unsigned int irq, - struct irq_desc *desc) -{ - while (mask) { - if (mask & 1) { - DEBUG_IRQ("handling irq %d\n", irq); - generic_handle_irq(irq); - } - irq++; - mask >>= 1; - } -} - -static void -imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(0); - irq = IRQ_GPIOA(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(1); - irq = IRQ_GPIOB(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(2); - irq = IRQ_GPIOC(0); - imx_gpio_handler(mask, irq, desc); -} - -static void -imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = ISR(3); - irq = IRQ_GPIOD(0); - imx_gpio_handler(mask, irq, desc); -} - -static struct irq_chip imx_internal_chip = { - .name = "MPU", - .ack = imx_mask_irq, - .mask = imx_mask_irq, - .unmask = imx_unmask_irq, -}; - -static struct irq_chip imx_gpio_chip = { - .name = "GPIO", - .ack = imx_gpio_ack_irq, - .mask = imx_gpio_mask_irq, - .unmask = imx_gpio_unmask_irq, - .set_type = imx_gpio_irq_type, -}; - -void __init -imx_init_irq(void) -{ - unsigned int irq; - - DEBUG_IRQ("Initializing imx interrupts\n"); - - /* Disable all interrupts initially. */ - /* Do not rely on the bootloader. */ - __raw_writel(0, IMX_AITC_INTENABLEH); - __raw_writel(0, IMX_AITC_INTENABLEL); - - /* Mask all GPIO interrupts as well */ - IMR(0) = 0; - IMR(1) = 0; - IMR(2) = 0; - IMR(3) = 0; - - for (irq = 0; irq < IMX_IRQS; irq++) { - set_irq_chip(irq, &imx_internal_chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) { - set_irq_chip(irq, &imx_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler); - set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler); - - /* Release masking of interrupts according to priority */ - __raw_writel(-1, IMX_AITC_NIMASK); - -#ifdef CONFIG_FIQ - /* Initialize FIQ */ - init_FIQ(); -#endif -} diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c deleted file mode 100644 index 1d48f2762cbc..000000000000 --- a/arch/arm/mach-imx/leds-mx1ads.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/arch/arm/mach-imx/leds-mx1ads.c - * - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * Original (leds-footbridge.c) by Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/system.h> -#include <asm/leds.h> -#include "leds.h" - -/* - * The MX1ADS Board has only one usable LED, - * so select only the timer led or the - * cpu usage led - */ -void -mx1ads_leds_event(led_event_t ledevt) -{ - unsigned long flags; - - local_irq_save(flags); - - switch (ledevt) { -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - DR(0) &= ~(1<<2); - break; - - case led_idle_end: - DR(0) |= 1<<2; - break; -#endif - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - DR(0) ^= 1<<2; -#endif - default: - break; - } - local_irq_restore(flags); -} diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c deleted file mode 100644 index cf30803e019b..000000000000 --- a/arch/arm/mach-imx/leds.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/arm/mach-imx/leds.c - * - * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/leds.h> -#include <asm/mach-types.h> - -#include "leds.h" - -static int __init -leds_init(void) -{ - if (machine_is_mx1ads()) { - leds_event = mx1ads_leds_event; - } - - return 0; -} - -__initcall(leds_init); diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h deleted file mode 100644 index 49dc1c1da338..000000000000 --- a/arch/arm/mach-imx/leds.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-imx/leds.h - * - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * blinky lights for IMX-based systems - * - */ -extern void mx1ads_leds_event(led_event_t evt); diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c deleted file mode 100644 index 87fa1ff43b0b..000000000000 --- a/arch/arm/mach-imx/mx1ads.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/arm/mach-imx/mx1ads.c - * - * Initially based on: - * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/device.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/system.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <mach/mmc.h> -#include <mach/imx-uart.h> -#include <linux/interrupt.h> -#include "generic.h" - -static struct resource cs89x0_resources[] = { - [0] = { - .start = IMX_CS4_PHYS + 0x300, - .end = IMX_CS4_PHYS + 0x300 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_GPIOC(17), - .end = IRQ_GPIOC(17), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cs89x0_device = { - .name = "cirrus-cs89x0", - .num_resources = ARRAY_SIZE(cs89x0_resources), - .resource = cs89x0_resources, -}; - -static struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct resource imx_uart1_resources[] = { - [0] = { - .start = 0x00206000, - .end = 0x002060FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART1_MINT_RX), - .end = (UART1_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART1_MINT_TX), - .end = (UART1_MINT_TX), - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = UART1_MINT_RTS, - .end = UART1_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart1_device = { - .name = "imx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(imx_uart1_resources), - .resource = imx_uart1_resources, - .dev = { - .platform_data = &uart_pdata, - } -}; - -static struct resource imx_uart2_resources[] = { - [0] = { - .start = 0x00207000, - .end = 0x002070FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART2_MINT_RX), - .end = (UART2_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART2_MINT_TX), - .end = (UART2_MINT_TX), - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = UART2_MINT_RTS, - .end = UART2_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart2_device = { - .name = "imx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(imx_uart2_resources), - .resource = imx_uart2_resources, - .dev = { - .platform_data = &uart_pdata, - } -}; - -static struct platform_device *devices[] __initdata = { - &cs89x0_device, - &imx_uart1_device, - &imx_uart2_device, -}; - -#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) -static int mx1ads_mmc_card_present(struct device *dev) -{ - /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ - return (SSR(1) & (1 << 20) ? 0 : 1); -} - -static struct imxmmc_platform_data mx1ads_mmc_info = { - .card_present = mx1ads_mmc_card_present, -}; -#endif - -static void __init -mx1ads_init(void) -{ -#ifdef CONFIG_LEDS - imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); -#endif -#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) - /* SD/MMC card detect */ - imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); - imx_set_mmc_info(&mx1ads_mmc_info); -#endif - - imx_gpio_mode(PC9_PF_UART1_CTS); - imx_gpio_mode(PC10_PF_UART1_RTS); - imx_gpio_mode(PC11_PF_UART1_TXD); - imx_gpio_mode(PC12_PF_UART1_RXD); - - imx_gpio_mode(PB28_PF_UART2_CTS); - imx_gpio_mode(PB29_PF_UART2_RTS); - imx_gpio_mode(PB30_PF_UART2_TXD); - imx_gpio_mode(PB31_PF_UART2_RXD); - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init -mx1ads_map_io(void) -{ - imx_map_io(); -} - -MACHINE_START(MX1ADS, "Motorola MX1ADS") - /* Maintainer: Sascha Hauer, Pengutronix */ - .phys_io = 0x00200000, - .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, - .boot_params = 0x08000100, - .map_io = mx1ads_map_io, - .init_irq = imx_init_irq, - .timer = &imx_timer, - .init_machine = mx1ads_init, -MACHINE_END diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c deleted file mode 100644 index 5aef18b599e5..000000000000 --- a/arch/arm/mach-imx/time.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * linux/arch/arm/mach-imx/time.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/time.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/irq.h> -#include <asm/mach/time.h> - -/* Use timer 1 as system timer */ -#define TIMER_BASE IMX_TIM1_BASE - -static struct clock_event_device clockevent_imx; -static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -/* - * IRQ handler for the timer - */ -static irqreturn_t -imx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_imx; - uint32_t tstat; - irqreturn_t ret = IRQ_NONE; - - /* clear the interrupt */ - tstat = IMX_TSTAT(TIMER_BASE); - IMX_TSTAT(TIMER_BASE) = 0; - - if (tstat & TSTAT_COMP) { - evt->event_handler(evt); - ret = IRQ_HANDLED; - } - - return ret; -} - -static struct irqaction imx_timer_irq = { - .name = "i.MX Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = imx_timer_interrupt, -}; - -/* - * Set up timer hardware into expected mode and state. - */ -static void __init imx_timer_hardware_init(void) -{ - /* - * Initialise to a known state (all timers off, and timing reset) - */ - IMX_TCTL(TIMER_BASE) = 0; - IMX_TPRER(TIMER_BASE) = 0; - - IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN; -} - -cycle_t imx_get_cycles(struct clocksource *cs) -{ - return IMX_TCN(TIMER_BASE); -} - -static struct clocksource clocksource_imx = { - .name = "imx_timer1", - .rating = 200, - .read = imx_get_cycles, - .mask = 0xFFFFFFFF, - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init imx_clocksource_init(unsigned long rate) -{ - clocksource_imx.mult = - clocksource_hz2mult(rate, clocksource_imx.shift); - clocksource_register(&clocksource_imx); - - return 0; -} - -static int imx_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long tcmp; - - tcmp = IMX_TCN(TIMER_BASE) + evt; - IMX_TCMP(TIMER_BASE) = tcmp; - - return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0; -} - -#ifdef DEBUG -static const char *clock_event_mode_label[]={ - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" -}; -#endif /*DEBUG*/ - -static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) -{ - unsigned long flags; - - /* - * The timer interrupt generation is disabled at least - * for enough time to call imx_set_next_event() - */ - local_irq_save(flags); - /* Disable interrupt in GPT module */ - IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN; - if (mode != clockevent_mode) { - /* Set event time into far-far future */ - IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3; - /* Clear pending interrupt */ - IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP; - } - -#ifdef DEBUG - printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n", - clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]); -#endif /*DEBUG*/ - - /* Remember timer mode */ - clockevent_mode = mode; - local_irq_restore(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n"); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* - * Do not put overhead of interrupt enable/disable into - * imx_set_next_event(), the core has about 4 minutes - * to call imx_set_next_event() or shutdown clock after - * mode switching - */ - local_irq_save(flags); - IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN; - local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appears */ - break; - } -} - -static struct clock_event_device clockevent_imx = { - .name = "imx_timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_mode = imx_set_mode, - .set_next_event = imx_set_next_event, - .rating = 200, -}; - -static int __init imx_clockevent_init(unsigned long rate) -{ - clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC, - clockevent_imx.shift); - clockevent_imx.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_imx); - clockevent_imx.min_delta_ns = - clockevent_delta2ns(0xf, &clockevent_imx); - - clockevent_imx.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_imx); - - return 0; -} - -extern int imx_clocks_init(void); - -static void __init imx_timer_init(void) -{ - struct clk *clk; - unsigned long rate; - - imx_clocks_init(); - - clk = clk_get(NULL, "perclk1"); - clk_enable(clk); - rate = clk_get_rate(clk); - - imx_timer_hardware_init(); - imx_clocksource_init(rate); - - imx_clockevent_init(rate); - - /* - * Make irqs happen for the system timer - */ - setup_irq(TIM1_INT, &imx_timer_irq); -} - -struct sys_timer imx_timer = { - .init = imx_timer_init, -}; diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 2c5a02b8520e..264f4d59f898 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -78,6 +78,12 @@ config MACH_IXDP465 IXDP465 Development Platform (Also known as BMP). For more information on this platform, see <file:Documentation/arm/IXP4xx>. +config MACH_GORAMO_MLR + bool "GORAMO Multi Link Router" + help + Say 'Y' here if you want your kernel to support GORAMO + MultiLink router. + config MACH_KIXRP435 bool "KIXRP435" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 2e6bbf927a74..47d1f60d23fa 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o +obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c new file mode 100644 index 000000000000..a733b8ff3cec --- /dev/null +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -0,0 +1,507 @@ +/* + * Goramo MultiLink router platform code + * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl> + */ + +#include <linux/delay.h> +#include <linux/hdlc.h> +#include <linux/i2c-gpio.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/serial_8250.h> +#include <asm/mach-types.h> +#include <asm/system.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/pci.h> + +#define xgpio_irq(n) (IRQ_IXP4XX_GPIO ## n) +#define gpio_irq(n) xgpio_irq(n) + +#define SLOT_ETHA 0x0B /* IDSEL = AD21 */ +#define SLOT_ETHB 0x0C /* IDSEL = AD20 */ +#define SLOT_MPCI 0x0D /* IDSEL = AD19 */ +#define SLOT_NEC 0x0E /* IDSEL = AD18 */ + +#define IRQ_ETHA IRQ_IXP4XX_GPIO4 +#define IRQ_ETHB IRQ_IXP4XX_GPIO5 +#define IRQ_NEC IRQ_IXP4XX_GPIO3 +#define IRQ_MPCI IRQ_IXP4XX_GPIO12 + +/* GPIO lines */ +#define GPIO_SCL 0 +#define GPIO_SDA 1 +#define GPIO_STR 2 +#define GPIO_HSS0_DCD_N 6 +#define GPIO_HSS1_DCD_N 7 +#define GPIO_HSS0_CTS_N 10 +#define GPIO_HSS1_CTS_N 11 +#define GPIO_HSS1_RTS_N 13 +#define GPIO_HSS0_RTS_N 14 + +/* Control outputs from 74HC4094 */ +#define CONTROL_HSS0_CLK_INT 0 +#define CONTROL_HSS1_CLK_INT 1 +#define CONTROL_HSS0_DTR_N 2 +#define CONTROL_HSS1_DTR_N 3 +#define CONTROL_EXT 4 +#define CONTROL_AUTO_RESET 5 +#define CONTROL_PCI_RESET_N 6 +#define CONTROL_EEPROM_WC_N 7 + +/* offsets from start of flash ROM = 0x50000000 */ +#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */ +#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */ +#define CFG_REV 0x4C /* u32 */ +#define CFG_SDRAM_SIZE 0x50 /* u32 */ +#define CFG_SDRAM_CONF 0x54 /* u32 */ +#define CFG_SDRAM_MODE 0x58 /* u32 */ +#define CFG_SDRAM_REFRESH 0x5C /* u32 */ + +#define CFG_HW_BITS 0x60 /* u32 */ +#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */ +#define CFG_HW_HAS_PCI_SLOT 0x00000008 +#define CFG_HW_HAS_ETH0 0x00000010 +#define CFG_HW_HAS_ETH1 0x00000020 +#define CFG_HW_HAS_HSS0 0x00000040 +#define CFG_HW_HAS_HSS1 0x00000080 +#define CFG_HW_HAS_UART0 0x00000100 +#define CFG_HW_HAS_UART1 0x00000200 +#define CFG_HW_HAS_EEPROM 0x00000400 + +#define FLASH_CMD_READ_ARRAY 0xFF +#define FLASH_CMD_READ_ID 0x90 +#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */ + +static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */; +static u8 control_value; + +static void set_scl(u8 value) +{ + gpio_line_set(GPIO_SCL, !!value); + udelay(3); +} + +static void set_sda(u8 value) +{ + gpio_line_set(GPIO_SDA, !!value); + udelay(3); +} + +static void set_str(u8 value) +{ + gpio_line_set(GPIO_STR, !!value); + udelay(3); +} + +static inline void set_control(int line, int value) +{ + if (value) + control_value |= (1 << line); + else + control_value &= ~(1 << line); +} + + +static void output_control(void) +{ + int i; + + gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); + + for (i = 0; i < 8; i++) { + set_scl(0); + set_sda(control_value & (0x80 >> i)); /* MSB first */ + set_scl(1); /* active edge */ + } + + set_str(1); + set_str(0); + + set_scl(0); + set_sda(1); /* Be ready for START */ + set_scl(1); +} + + +static void (*set_carrier_cb_tab[2])(void *pdev, int carrier); + +static int hss_set_clock(int port, unsigned int clock_type) +{ + int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT; + + switch (clock_type) { + case CLOCK_DEFAULT: + case CLOCK_EXT: + set_control(ctrl_int, 0); + output_control(); + return CLOCK_EXT; + + case CLOCK_INT: + set_control(ctrl_int, 1); + output_control(); + return CLOCK_INT; + + default: + return -EINVAL; + } +} + +static irqreturn_t hss_dcd_irq(int irq, void *pdev) +{ + int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N)); + gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + set_carrier_cb_tab[port](pdev, !i); + return IRQ_HANDLED; +} + + +static int hss_open(int port, void *pdev, + void (*set_carrier_cb)(void *pdev, int carrier)) +{ + int i, irq; + + if (!port) + irq = gpio_irq(GPIO_HSS0_DCD_N); + else + irq = gpio_irq(GPIO_HSS1_DCD_N); + + gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + set_carrier_cb(pdev, !i); + + set_carrier_cb_tab[!!port] = set_carrier_cb; + + if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) { + printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n", + irq, i); + return i; + } + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0); + output_control(); + gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); + return 0; +} + +static void hss_close(int port, void *pdev) +{ + free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N), + pdev); + set_carrier_cb_tab[!!port] = NULL; /* catch bugs */ + + set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); + output_control(); + gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); +} + + +/* Flash memory */ +static struct flash_platform_data flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device device_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { .platform_data = &flash_data }, + .num_resources = 1, + .resource = &flash_resource, +}; + + +/* I^2C interface */ +static struct i2c_gpio_platform_data i2c_data = { + .sda_pin = GPIO_SDA, + .scl_pin = GPIO_SCL, +}; + +static struct platform_device device_i2c = { + .name = "i2c-gpio", + .id = 0, + .dev = { .platform_data = &i2c_data }, +}; + + +/* IXP425 2 UART ports */ +static struct resource uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT + + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device device_uarts = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = uart_data, + .num_resources = 2, + .resource = uart_resources, +}; + + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info eth_plat[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 32, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 33, + } +}; + +static struct platform_device device_eth_tab[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = eth_plat, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = eth_plat + 1, + } +}; + + +/* IXP425 2 synchronous serial ports */ +static struct hss_plat_info hss_plat[] = { + { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 34, + }, { + .set_clock = hss_set_clock, + .open = hss_open, + .close = hss_close, + .txreadyq = 35, + } +}; + +static struct platform_device device_hss_tab[] = { + { + .name = "ixp4xx_hss", + .id = 0, + .dev.platform_data = hss_plat, + }, { + .name = "ixp4xx_hss", + .id = 1, + .dev.platform_data = hss_plat + 1, + } +}; + + +static struct platform_device *device_tab[6] __initdata = { + &device_flash, /* index 0 */ +}; + +static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readb(flash + addr); +#else + return __raw_readb(flash + (addr ^ 3)); +#endif +} + +static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr) +{ +#ifdef __ARMEB__ + return __raw_readw(flash + addr); +#else + return __raw_readw(flash + (addr ^ 2)); +#endif +} + +static void __init gmlr_init(void) +{ + u8 __iomem *flash; + int i, devices = 1; /* flash */ + + ixp4xx_sys_init(); + + if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL) + printk(KERN_ERR "goramo-mlr: unable to access system" + " configuration data\n"); + else { + system_rev = __raw_readl(flash + CFG_REV); + hw_bits = __raw_readl(flash + CFG_HW_BITS); + + for (i = 0; i < ETH_ALEN; i++) { + eth_plat[0].hwaddr[i] = + flash_readb(flash, CFG_ETH0_ADDRESS + i); + eth_plat[1].hwaddr[i] = + flash_readb(flash, CFG_ETH1_ADDRESS + i); + } + + __raw_writew(FLASH_CMD_READ_ID, flash); + system_serial_high = flash_readw(flash, FLASH_SER_OFF); + system_serial_high <<= 16; + system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2); + system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4); + system_serial_low <<= 16; + system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6); + __raw_writew(FLASH_CMD_READ_ARRAY, flash); + + iounmap(flash); + } + + switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) { + case CFG_HW_HAS_UART0: + memset(&uart_data[1], 0, sizeof(uart_data[1])); + device_uarts.num_resources = 1; + break; + + case CFG_HW_HAS_UART1: + device_uarts.dev.platform_data = &uart_data[1]; + device_uarts.resource = &uart_resources[1]; + device_uarts.num_resources = 1; + break; + } + if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) + device_tab[devices++] = &device_uarts; /* max index 1 */ + + if (hw_bits & CFG_HW_HAS_ETH0) + device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */ + if (hw_bits & CFG_HW_HAS_ETH1) + device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */ + + if (hw_bits & CFG_HW_HAS_HSS0) + device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */ + if (hw_bits & CFG_HW_HAS_HSS1) + device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */ + + if (hw_bits & CFG_HW_HAS_EEPROM) + device_tab[devices++] = &device_i2c; /* max index 6 */ + + gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT); + gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN); + gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN); + set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); + set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); + + set_control(CONTROL_HSS0_DTR_N, 1); + set_control(CONTROL_HSS1_DTR_N, 1); + set_control(CONTROL_EEPROM_WC_N, 1); + set_control(CONTROL_PCI_RESET_N, 1); + output_control(); + + msleep(1); /* Wait for PCI devices to initialize */ + + flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + platform_add_devices(device_tab, devices); +} + + +#ifdef CONFIG_PCI +static void __init gmlr_pci_preinit(void) +{ + set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static void __init gmlr_pci_postinit(void) +{ + if ((hw_bits & CFG_HW_USB_PORTS) >= 2 && + (hw_bits & CFG_HW_USB_PORTS) < 5) { + /* need to adjust number of USB ports on NEC chip */ + u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0; + if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { + value &= ~7; + value |= (hw_bits & CFG_HW_USB_PORTS); + ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value); + } + } +} + +static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + switch(slot) { + case SLOT_ETHA: return IRQ_ETHA; + case SLOT_ETHB: return IRQ_ETHB; + case SLOT_NEC: return IRQ_NEC; + default: return IRQ_MPCI; + } +} + +static struct hw_pci gmlr_hw_pci __initdata = { + .nr_controllers = 1, + .preinit = gmlr_pci_preinit, + .postinit = gmlr_pci_postinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = gmlr_map_irq, +}; + +static int __init gmlr_pci_init(void) +{ + if (machine_is_goramo_mlr() && + (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT))) + pci_common_init(&gmlr_hw_pci); + return 0; +} + +subsys_initcall(gmlr_pci_init); +#endif /* CONFIG_PCI */ + + +MACHINE_START(GORAMO_MLR, "MultiLink") + /* Maintainer: Krzysztof Halasa */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = gmlr_init, +MACHINE_END diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h index def7773be67c..b2ef65db0e91 100644 --- a/arch/arm/mach-ixp4xx/include/mach/cpu.h +++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h @@ -26,6 +26,8 @@ #define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */ #define IXP46X_PROCESSOR_ID_MASK 0xfffffff0 +#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \ + IXP42X_PROCESSOR_ID_VALUE) #define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \ IXP42X_PROCESSOR_ID_VALUE) #define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \ @@ -35,8 +37,11 @@ static inline u32 ixp4xx_read_feature_bits(void) { - unsigned int val = ~*IXP4XX_EXP_CFG2; + u32 val = ~*IXP4XX_EXP_CFG2; + if (cpu_is_ixp42x_rev_a0()) + return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP | + IXP4XX_FEATURE_AES); if (cpu_is_ixp42x()) return val & IXP42X_FEATURE_MASK; if (cpu_is_ixp43x()) diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 0cbe6ceb67c5..9e7cad2d54cb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -15,7 +15,7 @@ #define DEBUG_QMGR 0 #define HALF_QUEUES 32 -#define QUEUES 64 /* only 32 lower queues currently supported */ +#define QUEUES 64 #define MAX_QUEUE_LENGTH 4 /* in dwords */ #define QUEUE_STAT1_EMPTY 1 /* queue status bits */ @@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue) return val; } -static inline int qmgr_get_stat1(unsigned int queue) +static inline int __qmgr_get_stat1(unsigned int queue) { extern struct qmgr_regs __iomem *qmgr_regs; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } -static inline int qmgr_get_stat2(unsigned int queue) +static inline int __qmgr_get_stat2(unsigned int queue) { extern struct qmgr_regs __iomem *qmgr_regs; + BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; } +/** + * qmgr_stat_empty() - checks if a hardware queue is empty + * @queue: queue number + * + * Returns non-zero value if the queue is empty. + */ static inline int qmgr_stat_empty(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY); + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY; } -static inline int qmgr_stat_nearly_empty(unsigned int queue) +/** + * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark + * @queue: queue number + * + * Returns non-zero value if the queue is below low watermark. + */ +static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY); + extern struct qmgr_regs __iomem *qmgr_regs; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statne_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY; } -static inline int qmgr_stat_nearly_full(unsigned int queue) +/** + * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark + * @queue: queue number + * + * Returns non-zero value if the queue is above high watermark + */ +static inline int qmgr_stat_above_high_watermark(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL); + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL; } +/** + * qmgr_stat_full() - checks if a hardware queue is full + * @queue: queue number + * + * Returns non-zero value if the queue is full. + */ static inline int qmgr_stat_full(unsigned int queue) { - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL); + extern struct qmgr_regs __iomem *qmgr_regs; + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statf_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL; } +/** + * qmgr_stat_underflow() - checks if a hardware queue experienced underflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced underflow. + */ static inline int qmgr_stat_underflow(unsigned int queue) { - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW); + return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW; } +/** + * qmgr_stat_overflow() - checks if a hardware queue experienced overflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced overflow. + */ static inline int qmgr_stat_overflow(unsigned int queue) { - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW); + return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW; } #endif diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 7bb8e778e4b6..47ac69c7ec78 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe) /* reset the NPE */ ixp4xx_write_feature_bits(val & ~(IXP4XX_FEATURE_RESET_NPEA << npe->id)); - for (i = 0; i < MAX_RETRIES; i++) { - if (!(ixp4xx_read_feature_bits() & - (IXP4XX_FEATURE_RESET_NPEA << npe->id))) - break; /* reset completed */ - udelay(1); - } - if (i == MAX_RETRIES) - return -ETIMEDOUT; - /* deassert reset */ ixp4xx_write_feature_bits(val | (IXP4XX_FEATURE_RESET_NPEA << npe->id)); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index bfddc73d0a20..bfdbe4b5a3cc 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ -static void (*irq_handlers[HALF_QUEUES])(void *pdev); -static void *irq_pdevs[HALF_QUEUES]; +static void (*irq_handlers[QUEUES])(void *pdev); +static void *irq_pdevs[QUEUES]; #if DEBUG_QMGR char qmgr_queue_descs[QUEUES][32]; @@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32]; void qmgr_set_irq(unsigned int queue, int src, void (*handler)(void *pdev), void *pdev) { - u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */ - int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ unsigned long flags; - src &= 7; spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg); + if (queue < HALF_QUEUES) { + u32 __iomem *reg; + int bit; + BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL); + reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */ + bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ + __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), + reg); + } else + /* IRQ source for queues 32-63 is fixed */ + BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY); + irq_handlers[queue] = handler; irq_pdevs[queue] = pdev; spin_unlock_irqrestore(&qmgr_lock, flags); } -static irqreturn_t qmgr_irq1(int irq, void *pdev) +static irqreturn_t qmgr_irq1_a0(int irq, void *pdev) { - int i; - u32 val = __raw_readl(&qmgr_regs->irqstat[0]); - __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */ - - for (i = 0; i < HALF_QUEUES; i++) - if (val & (1 << i)) + int i, ret = 0; + u32 en_bitmap, src, stat; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]); + + en_bitmap = qmgr_regs->irqen[0]; + while (en_bitmap) { + i = __fls(en_bitmap); /* number of the last "low" queue */ + en_bitmap &= ~BIT(i); + src = qmgr_regs->irqsrc[i >> 3]; + stat = qmgr_regs->stat1[i >> 3]; + if (src & 4) /* the IRQ condition is inverted */ + stat = ~stat; + if (stat & BIT(src & 3)) { irq_handlers[i](irq_pdevs[i]); + ret = IRQ_HANDLED; + } + } + return ret; +} + + +static irqreturn_t qmgr_irq2_a0(int irq, void *pdev) +{ + int i, ret = 0; + u32 req_bitmap; + + /* ACK - it may clear any bits so don't rely on it */ + __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]); + + req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h; + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last "high" queue */ + req_bitmap &= ~BIT(i); + irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]); + ret = IRQ_HANDLED; + } + return ret; +} - return val ? IRQ_HANDLED : 0; + +static irqreturn_t qmgr_irq(int irq, void *pdev) +{ + int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1); + u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]); + + if (!req_bitmap) + return 0; + __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */ + + while (req_bitmap) { + i = __fls(req_bitmap); /* number of the last queue */ + req_bitmap &= ~BIT(i); + i += half * HALF_QUEUES; + irq_handlers[i](irq_pdevs[i]); + } + return IRQ_HANDLED; } void qmgr_enable_irq(unsigned int queue) { unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue), - &qmgr_regs->irqen[0]); + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask, + &qmgr_regs->irqen[half]); spin_unlock_irqrestore(&qmgr_lock, flags); } void qmgr_disable_irq(unsigned int queue) { unsigned long flags; + int half = queue / 32; + u32 mask = 1 << (queue & (HALF_QUEUES - 1)); spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue), - &qmgr_regs->irqen[0]); - __raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */ + __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask, + &qmgr_regs->irqen[half]); + __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */ spin_unlock_irqrestore(&qmgr_lock, flags); } @@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, u32 cfg, addr = 0, mask[4]; /* in 16-dwords */ int err; - if (queue >= HALF_QUEUES) - return -ERANGE; + BUG_ON(queue >= QUEUES); if ((nearly_empty_watermark | nearly_full_watermark) & ~7) return -EINVAL; @@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue) { u32 cfg, addr, mask[4]; - BUG_ON(queue >= HALF_QUEUES); /* not in valid range */ + BUG_ON(queue >= QUEUES); /* not in valid range */ spin_lock_irq(&qmgr_lock); cfg = __raw_readl(&qmgr_regs->sram[queue]); @@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue) static int qmgr_init(void) { int i, err; + irq_handler_t handler1, handler2; + mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE, "IXP4xx Queue Manager"); @@ -247,23 +309,42 @@ static int qmgr_init(void) __raw_writel(0, &qmgr_regs->irqen[i]); } + __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h); + __raw_writel(0, &qmgr_regs->statf_h); + for (i = 0; i < QUEUES; i++) __raw_writel(0, &qmgr_regs->sram[i]); - err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0, - "IXP4xx Queue Manager", NULL); + if (cpu_is_ixp42x_rev_a0()) { + handler1 = qmgr_irq1_a0; + handler2 = qmgr_irq2_a0; + } else + handler1 = handler2 = qmgr_irq; + + err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager", + NULL); if (err) { - printk(KERN_ERR "qmgr: failed to request IRQ%i\n", - IRQ_IXP4XX_QM1); + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM1, err); goto error_irq; } + err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager", + NULL); + if (err) { + printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", + IRQ_IXP4XX_QM2, err); + goto error_irq2; + } + used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */ spin_lock_init(&qmgr_lock); printk(KERN_INFO "IXP4xx Queue Manager initialized.\n"); return 0; +error_irq2: + free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: iounmap(qmgr_regs); error_map: @@ -274,7 +355,9 @@ error_map: static void qmgr_remove(void) { free_irq(IRQ_IXP4XX_QM1, NULL); + free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); + synchronize_irq(IRQ_IXP4XX_QM2); iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index b5421cccd7e1..25100f7acf4c 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -20,6 +20,12 @@ config MACH_RD88F6281 Say 'Y' here if you want your kernel to support the Marvell RD-88F6281 Reference Board. +config MACH_MV88F6281GTW_GE + bool "Marvell 88F6281 GTW GE Board" + help + Say 'Y' here if you want your kernel to support the + Marvell 88F6281 GTW GE Board. + config MACH_SHEEVAPLUG bool "Marvell SheevaPlug Reference Board" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 8f03c9b9bdd9..9dd680e964d6 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -3,5 +3,8 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o + +obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 5db4f0bbe5ee..1da5d1c18ecb 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -20,6 +20,7 @@ */ #define TARGET_DDR 0 #define TARGET_DEV_BUS 1 +#define TARGET_SRAM 3 #define TARGET_PCIE 4 #define ATTR_DEV_SPI_ROM 0x1e #define ATTR_DEV_BOOT 0x1d @@ -30,6 +31,7 @@ #define ATTR_DEV_CS0 0x3e #define ATTR_PCIE_IO 0xe0 #define ATTR_PCIE_MEM 0xe8 +#define ATTR_SRAM 0x01 /* * Helpers to get DDR bank info @@ -48,7 +50,6 @@ struct mbus_dram_target_info kirkwood_mbus_dram_info; -static int __initdata win_alloc_count; static int __init cpu_win_can_remap(int win) { @@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void) setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, TARGET_DEV_BUS, ATTR_DEV_NAND, -1); - win_alloc_count = 3; + /* + * Setup window for SRAM. + */ + setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, + TARGET_SRAM, ATTR_SRAM, -1); /* * Setup MBUS dram target info. @@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void) } kirkwood_mbus_dram_info.num_cs = cs; } - -void __init kirkwood_setup_sram_win(u32 base, u32 size) -{ - setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1); -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index be1ca28fed3f..0f6919838011 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -16,6 +16,7 @@ #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> +#include <linux/mtd/nand.h> #include <linux/spi/orion_spi.h> #include <net/dsa.h> #include <asm/page.h> @@ -29,6 +30,7 @@ #include <plat/mvsdio.h> #include <plat/mv_xor.h> #include <plat/orion_nand.h> +#include <plat/orion_wdt.h> #include <plat/time.h> #include "common.h" @@ -54,6 +56,13 @@ void __init kirkwood_map_io(void) iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); } +/* + * Default clock control bits. Any bit _not_ set in this variable + * will be cleared from the hardware after platform devices have been + * registered. Some reserved bits must be set to 1. + */ +unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; + /***************************************************************************** * EHCI @@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = { void __init kirkwood_ehci_init(void) { + kirkwood_clk_ctrl |= CGC_USB0; platform_device_register(&kirkwood_ehci); } @@ -151,6 +161,7 @@ static struct platform_device kirkwood_ge00 = { void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE0; eth_data->shared = &kirkwood_ge00_shared; kirkwood_ge00.dev.platform_data = eth_data; @@ -212,6 +223,7 @@ static struct platform_device kirkwood_ge01 = { void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE1; eth_data->shared = &kirkwood_ge01_shared; kirkwood_ge01.dev.platform_data = eth_data; @@ -258,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) /***************************************************************************** + * NAND flash + ****************************************************************************/ +static struct resource kirkwood_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KIRKWOOD_NAND_MEM_PHYS_BASE, + .end = KIRKWOOD_NAND_MEM_PHYS_BASE + + KIRKWOOD_NAND_MEM_SIZE - 1, +}; + +static struct orion_nand_data kirkwood_nand_data = { + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device kirkwood_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &kirkwood_nand_data, + }, + .resource = &kirkwood_nand_resource, + .num_resources = 1, +}; + +void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, + int chip_delay) +{ + kirkwood_clk_ctrl |= CGC_RUNIT; + kirkwood_nand_data.parts = parts; + kirkwood_nand_data.nr_parts = nr_parts; + kirkwood_nand_data.chip_delay = chip_delay; + platform_device_register(&kirkwood_nand_flash); +} + + +/***************************************************************************** * SoC RTC ****************************************************************************/ static struct resource kirkwood_rtc_resource = { @@ -301,6 +350,9 @@ static struct platform_device kirkwood_sata = { void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) { + kirkwood_clk_ctrl |= CGC_SATA0; + if (sata_data->n_ports > 1) + kirkwood_clk_ctrl |= CGC_SATA1; sata_data->dram = &kirkwood_mbus_dram_info; kirkwood_sata.dev.platform_data = sata_data; platform_device_register(&kirkwood_sata); @@ -346,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) else mvsdio_data->clock = 200000000; mvsdio_data->dram = &kirkwood_mbus_dram_info; + kirkwood_clk_ctrl |= CGC_SDIO; kirkwood_sdio.dev.platform_data = mvsdio_data; platform_device_register(&kirkwood_sdio); } @@ -377,6 +430,7 @@ static struct platform_device kirkwood_spi = { void __init kirkwood_spi_init() { + kirkwood_clk_ctrl |= CGC_RUNIT; platform_device_register(&kirkwood_spi); } @@ -507,6 +561,43 @@ void __init kirkwood_uart1_init(void) /***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ + +static struct resource kirkwood_crypto_res[] = { + { + .name = "regs", + .start = CRYPTO_PHYS_BASE, + .end = CRYPTO_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .name = "sram", + .start = KIRKWOOD_SRAM_PHYS_BASE, + .end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "crypto interrupt", + .start = IRQ_KIRKWOOD_CRYPTO, + .end = IRQ_KIRKWOOD_CRYPTO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_crypto_device = { + .name = "mv_crypto", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_crypto_res), + .resource = kirkwood_crypto_res, +}; + +void __init kirkwood_crypto_init(void) +{ + kirkwood_clk_ctrl |= CGC_CRYPTO; + platform_device_register(&kirkwood_crypto_device); +} + + +/***************************************************************************** * XOR ****************************************************************************/ static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = { @@ -597,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = { static void __init kirkwood_xor0_init(void) { + kirkwood_clk_ctrl |= CGC_XOR0; platform_device_register(&kirkwood_xor0_shared); /* @@ -695,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = { static void __init kirkwood_xor1_init(void) { + kirkwood_clk_ctrl |= CGC_XOR1; platform_device_register(&kirkwood_xor1_shared); /* @@ -713,6 +806,29 @@ static void __init kirkwood_xor1_init(void) /***************************************************************************** + * Watchdog + ****************************************************************************/ +static struct orion_wdt_platform_data kirkwood_wdt_data = { + .tclk = 0, +}; + +static struct platform_device kirkwood_wdt_device = { + .name = "orion_wdt", + .id = -1, + .dev = { + .platform_data = &kirkwood_wdt_data, + }, + .num_resources = 0, +}; + +static void __init kirkwood_wdt_init(void) +{ + kirkwood_wdt_data.tclk = kirkwood_tclk; + platform_device_register(&kirkwood_wdt_device); +} + + +/***************************************************************************** * Time handling ****************************************************************************/ int kirkwood_tclk; @@ -804,6 +920,49 @@ void __init kirkwood_init(void) /* internal devices that every board has */ kirkwood_rtc_init(); + kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); + kirkwood_crypto_init(); +} + +static int __init kirkwood_clock_gate(void) +{ + unsigned int curr = readl(CLOCK_GATING_CTRL); + + printk(KERN_DEBUG "Gating clock of unused units\n"); + printk(KERN_DEBUG "before: 0x%08x\n", curr); + + /* Make sure those units are accessible */ + writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL); + + /* For SATA: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_SATA0)) { + /* Disable PLL and IVREF */ + writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); + } + if (!(kirkwood_clk_ctrl & CGC_SATA1)) { + /* Disable PLL and IVREF */ + writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); + } + + /* For PCIe: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_PEX0)) { + writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); + while (1) + if (readl(PCIE_STATUS) & 0x1) + break; + writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); + } + + /* Now gate clock the required units */ + writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL); + printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL)); + + return 0; } +late_initcall(kirkwood_clock_gate); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 6ee88406f381..d7de43464358 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -15,6 +15,7 @@ struct dsa_platform_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; struct mvsdio_platform_data; +struct mtd_partition; /* * Basic Kirkwood init functions used early by machine-setup. @@ -25,7 +26,6 @@ void kirkwood_init_irq(void); extern struct mbus_dram_target_info kirkwood_mbus_dram_info; void kirkwood_setup_cpu_mbus(void); -void kirkwood_setup_sram_win(u32 base, u32 size); void kirkwood_pcie_id(u32 *dev, u32 *rev); @@ -40,9 +40,11 @@ void kirkwood_spi_init(void); void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); +void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #endif diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c new file mode 100644 index 000000000000..f68d33f1f396 --- /dev/null +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-kirkwood/cpuidle.c + * + * CPU idle Marvell Kirkwood SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The cpu idle uses wait-for-interrupt and DDR self refresh in order + * to implement two idle states - + * #1 wait-for-interrupt + * #2 wait-for-interrupt and DDR self refresh + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/cpuidle.h> +#include <linux/io.h> +#include <asm/proc-fns.h> +#include <mach/kirkwood.h> + +#define KIRKWOOD_MAX_STATES 2 + +static struct cpuidle_driver kirkwood_idle_driver = { + .name = "kirkwood_idle", + .owner = THIS_MODULE, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); + +/* Actual code that puts the SoC in different idle states */ +static int kirkwood_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + if (state == &dev->states[0]) + /* Wait for interrupt state */ + cpu_do_idle(); + else if (state == &dev->states[1]) { + /* + * Following write will put DDR in self refresh. + * Note that we have 256 cycles before DDR puts it + * self in self-refresh, so the wait-for-interrupt + * call afterwards won't get the DDR from self refresh + * mode. + */ + writel(0x7, DDR_OPERATION_BASE); + cpu_do_idle(); + } + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + return idle_time; +} + +/* Initialize CPU idle by registering the idle states */ +static int kirkwood_init_cpuidle(void) +{ + struct cpuidle_device *device; + + cpuidle_register_driver(&kirkwood_idle_driver); + + device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); + device->state_count = KIRKWOOD_MAX_STATES; + + /* Wait for interrupt state */ + device->states[0].enter = kirkwood_enter_idle; + device->states[0].exit_latency = 1; + device->states[0].target_residency = 10000; + device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[0].name, "WFI"); + strcpy(device->states[0].desc, "Wait for interrupt"); + + /* Wait for interrupt and DDR self refresh state */ + device->states[1].enter = kirkwood_enter_idle; + device->states[1].exit_latency = 10; + device->states[1].target_residency = 10000; + device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[1].name, "DDR SR"); + strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); + return -EIO; + } + return 0; +} + +device_initcall(kirkwood_init_cpuidle); diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index 5505d5837752..39bdf4bcace9 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -11,14 +11,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> -#include <plat/orion_nand.h> #include <plat/mvsdio.h> #include "common.h" #include "mpp.h" @@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = { }, }; -static struct resource db88f6281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data db88f6281_nand_data = { - .parts = db88f6281_nand_parts, - .nr_parts = ARRAY_SIZE(db88f6281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device db88f6281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &db88f6281_nand_data, - }, - .resource = &db88f6281_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data db88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; @@ -92,13 +64,12 @@ static void __init db88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(db88f6281_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&db88f6281_ge00_data); kirkwood_sata_init(&db88f6281_sata_data); kirkwood_uart0_init(); kirkwood_sdio_init(&db88f6281_mvsdio_data); - - platform_device_register(&db88f6281_nand_flash); } static int __init db88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 4f7029f521cc..9e80d9232c83 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -17,12 +17,15 @@ #define CPU_RESET 0x00000002 #define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define WDT_RESET_OUT_EN 0x00000002 #define SOFT_RESET_OUT_EN 0x00000004 #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define WDT_INT_REQ 0x0008 + #define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) #define BRIDGE_INT_TIMER0 0x0002 #define BRIDGE_INT_TIMER1 0x0004 @@ -39,4 +42,22 @@ #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 +#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c) +#define CGC_GE0 (1 << 0) +#define CGC_PEX0 (1 << 2) +#define CGC_USB0 (1 << 3) +#define CGC_SDIO (1 << 4) +#define CGC_TSU (1 << 5) +#define CGC_DUNIT (1 << 6) +#define CGC_RUNIT (1 << 7) +#define CGC_XOR0 (1 << 8) +#define CGC_AUDIO (1 << 9) +#define CGC_SATA0 (1 << 14) +#define CGC_SATA1 (1 << 15) +#define CGC_XOR1 (1 << 16) +#define CGC_CRYPTO (1 << 17) +#define CGC_GE1 (1 << 19) +#define CGC_TDM (1 << 20) +#define CGC_RESERVED ((1 << 18) | (0x6 << 21)) + #endif diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index be07be0ef522..a643a846d5fb 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr) + KIRKWOOD_PCIE_IO_VIRT_BASE); } +static inline void __iomem * +__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) +{ + void __iomem *retval; + unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE; + if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE && + size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) { + retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs; + } else { + retval = __arm_ioremap(paddr, size, mtype); + } + + return retval; +} + +static inline void +__arch_iounmap(void __iomem *addr) +{ + if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE || + addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE)) + __iounmap(addr); +} + +#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) +#define __arch_iounmap(a) __arch_iounmap(a) #define __io(a) __io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index b3e13958821d..07af858814a0 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -20,16 +20,18 @@ * f1000000 on-chip peripheral registers * f2000000 PCIe I/O space * f3000000 NAND controller address window + * f4000000 Security Accelerator SRAM * * virt phys size * fee00000 f1000000 1M on-chip peripheral registers * fef00000 f2000000 1M PCIe I/O space */ +#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000 +#define KIRKWOOD_SRAM_SIZE SZ_2K + #define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K - * is the minimal window size - */ +#define KIRKWOOD_NAND_MEM_SIZE SZ_1K #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 #define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000 @@ -48,6 +50,7 @@ */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) #define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) +#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) @@ -63,7 +66,11 @@ #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -80,6 +87,11 @@ #define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) #define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330) #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 63c44934391a..a5900f64e38c 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) if (!variant_mask) return; + /* Initialize gpiolib. */ + orion_gpio_init(); + printk(KERN_DEBUG "initial MPP regs:"); for (i = 0; i < MPP_NR_REGS; i++) { mpp_ctrl[i] = readl(MPP_CTRL(i)); diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c new file mode 100644 index 000000000000..0358f45766cb --- /dev/null +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c + * + * Marvell 88F6281 GTW GE Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/timer.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <net/dsa.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &mv88f6281gtw_ge_switch_chip_data, +}; + +static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = { + .type = "mx25l12805d", +}; + +static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &mv88f6281gtw_ge_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { + { + .code = KEY_RESTART, + .gpio = 47, + .desc = "SWR Button", + .active_low = 1, + }, { + .code = KEY_F1, + .gpio = 46, + .desc = "WPS Button(F1)", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = { + .buttons = mv88f6281gtw_ge_button_pins, + .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins), +}; + +static struct platform_device mv88f6281gtw_ge_buttons = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &mv88f6281gtw_ge_button_data, + }, +}; + +static struct gpio_led mv88f6281gtw_ge_led_pins[] = { + { + .name = "gtw:green:Status", + .gpio = 20, + .active_low = 0, + }, { + .name = "gtw:red:Status", + .gpio = 21, + .active_low = 0, + }, { + .name = "gtw:green:USB", + .gpio = 12, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = { + .leds = mv88f6281gtw_ge_led_pins, + .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins), +}; + +static struct platform_device mv88f6281gtw_ge_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mv88f6281gtw_ge_led_data, + }, +}; + +static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = { + MPP12_GPO, /* Status#_USB pin */ + MPP20_GPIO, /* Status#_GLED pin */ + MPP21_GPIO, /* Status#_RLED pin */ + MPP46_GPIO, /* WPS_Switch pin */ + MPP47_GPIO, /* SW_Init pin */ + 0 +}; + +static void __init mv88f6281gtw_ge_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); + kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); + spi_register_board_info(mv88f6281gtw_ge_spi_slave_info, + ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_uart0_init(); + platform_device_register(&mv88f6281gtw_ge_leds); + platform_device_register(&mv88f6281gtw_ge_buttons); +} + +static int __init mv88f6281gtw_ge_pci_init(void) +{ + if (machine_is_mv88f6281gtw_ge()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(mv88f6281gtw_ge_pci_init); + +MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") + /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = mv88f6281gtw_ge_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 73fccacd1a73..d90b9aae308d 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -14,6 +14,7 @@ #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> +#include <mach/bridge-regs.h> #include "common.h" @@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = { static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) { struct resource *res; + extern unsigned int kirkwood_clk_ctrl; /* * Generic PCIe unit setup. @@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) sys->resource[2] = NULL; sys->io_offset = 0; + kirkwood_clk_ctrl |= CGC_PEX0; + return 1; } diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 2f0e4ef3db0f..8bf4153d0840 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -11,8 +11,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/spi/flash.h> diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 31e996d65fc4..31708ddbc83e 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/irq.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> @@ -22,7 +21,6 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include <plat/mvsdio.h> -#include <plat/orion_nand.h> #include "common.h" #include "mpp.h" @@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = { }, }; -static struct resource rd88f6281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data rd88f6281_nand_data = { - .parts = rd88f6281_nand_parts, - .nr_parts = ARRAY_SIZE(rd88f6281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device rd88f6281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &rd88f6281_nand_data, - }, - .resource = &rd88f6281_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_NONE, .speed = SPEED_1000, @@ -114,6 +86,7 @@ static void __init rd88f6281_init(void) kirkwood_init(); kirkwood_mpp_conf(rd88f6281_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); @@ -129,8 +102,6 @@ static void __init rd88f6281_init(void) kirkwood_sata_init(&rd88f6281_sata_data); kirkwood_sdio_init(&rd88f6281_mvsdio_data); kirkwood_uart0_init(); - - platform_device_register(&rd88f6281_nand_flash); } static int __init rd88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 831e4a56cae1..c7319eeac8bb 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> @@ -20,7 +19,6 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include <plat/mvsdio.h> -#include <plat/orion_nand.h> #include "common.h" #include "mpp.h" @@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = { }, }; -static struct resource sheevaplug_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data sheevaplug_nand_data = { - .parts = sheevaplug_nand_parts, - .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, - .chip_delay = 25, -}; - -static struct platform_device sheevaplug_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &sheevaplug_nand_data, - }, - .resource = &sheevaplug_nand_resource, - .num_resources = 1, -}; - static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; static struct mvsdio_platform_data sheevaplug_mvsdio_data = { - // unfortunately the CD signal has not been connected */ + /* unfortunately the CD signal has not been connected */ }; static struct gpio_led sheevaplug_led_pins[] = { @@ -111,6 +83,7 @@ static void __init sheevaplug_init(void) kirkwood_mpp_conf(sheevaplug_mpp_config); kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) @@ -120,7 +93,6 @@ static void __init sheevaplug_init(void) kirkwood_ge00_init(&sheevaplug_ge00_data); kirkwood_sdio_init(&sheevaplug_mvsdio_data); - platform_device_register(&sheevaplug_nand_flash); platform_device_register(&sheevaplug_leds); } diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index e83e45ebf7a4..16295cfd5e29 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -52,6 +52,7 @@ /* * Interrupt numbers for PXA910 */ +#define IRQ_PXA910_NONE (-1) #define IRQ_PXA910_AIRQ 0 #define IRQ_PXA910_SSP3 1 #define IRQ_PXA910_SSP2 2 diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 2e914649b9e4..3b216bf41e7f 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -253,6 +253,10 @@ #define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1) #define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1) +/* I2C */ +#define GPIO105_CI2C_SDA MFP_CFG(GPIO105, AF1) +#define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1) + /* I2S */ #define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) #define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) @@ -260,4 +264,27 @@ #define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) #define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) +/* PWM */ +#define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1) +#define GPIO97_PWM2_OUT MFP_CFG(GPIO97, AF1) +#define GPIO98_PWM1_OUT MFP_CFG(GPIO98, AF1) +#define GPIO104_PWM4_OUT MFP_CFG(GPIO104, AF1) +#define GPIO106_PWM2_OUT MFP_CFG(GPIO106, AF2) +#define GPIO74_PWM4_OUT MFP_CFG(GPIO74, AF2) +#define GPIO75_PWM3_OUT MFP_CFG(GPIO75, AF2) +#define GPIO76_PWM2_OUT MFP_CFG(GPIO76, AF2) +#define GPIO77_PWM1_OUT MFP_CFG(GPIO77, AF2) +#define GPIO82_PWM4_OUT MFP_CFG(GPIO82, AF2) +#define GPIO83_PWM3_OUT MFP_CFG(GPIO83, AF2) +#define GPIO84_PWM2_OUT MFP_CFG(GPIO84, AF2) +#define GPIO85_PWM1_OUT MFP_CFG(GPIO85, AF2) +#define GPIO84_PWM1_OUT MFP_CFG(GPIO84, AF4) +#define GPIO122_PWM3_OUT MFP_CFG(GPIO122, AF3) +#define GPIO123_PWM1_OUT MFP_CFG(GPIO123, AF1) +#define GPIO124_PWM2_OUT MFP_CFG(GPIO124, AF1) +#define GPIO125_PWM3_OUT MFP_CFG(GPIO125, AF1) +#define GPIO126_PWM4_OUT MFP_CFG(GPIO126, AF1) +#define GPIO86_PWM1_OUT MFP_CFG(GPIO86, AF2) +#define GPIO86_PWM2_OUT MFP_CFG(GPIO86, AF3) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index d97de36c50ad..bf1189ff9a34 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -159,4 +159,12 @@ #define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM) #define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM) +/* PWM */ +#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2) +#define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2) +#define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2) +#define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2) +#define GPIO119_PWM3_OUT MFP_CFG(GPIO119, AF2) +#define GPIO120_PWM4_OUT MFP_CFG(GPIO120, AF2) + #endif /* __ASM_MACH MFP_PXA910_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index ef0a8a2076e9..6bf1f0eefcd1 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -1,10 +1,18 @@ #ifndef __ASM_MACH_PXA168_H #define __ASM_MACH_PXA168_H +#include <linux/i2c.h> #include <mach/devices.h> +#include <plat/i2c.h> extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; +extern struct pxa_device_desc pxa168_device_twsi0; +extern struct pxa_device_desc pxa168_device_twsi1; +extern struct pxa_device_desc pxa168_device_pwm1; +extern struct pxa_device_desc pxa168_device_pwm2; +extern struct pxa_device_desc pxa168_device_pwm3; +extern struct pxa_device_desc pxa168_device_pwm4; static inline int pxa168_add_uart(int id) { @@ -20,4 +28,40 @@ static inline int pxa168_add_uart(int id) return pxa_register_device(d, NULL, 0); } + +static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data, + struct i2c_board_info *info, unsigned size) +{ + struct pxa_device_desc *d = NULL; + int ret; + + switch (id) { + case 0: d = &pxa168_device_twsi0; break; + case 1: d = &pxa168_device_twsi1; break; + default: + return -EINVAL; + } + + ret = i2c_register_board_info(id, info, size); + if (ret) + return ret; + + return pxa_register_device(d, data, sizeof(*data)); +} + +static inline int pxa168_add_pwm(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa168_device_pwm1; break; + case 2: d = &pxa168_device_pwm2; break; + case 3: d = &pxa168_device_pwm3; break; + case 4: d = &pxa168_device_pwm4; break; + default: + return -EINVAL; + } + + return pxa_register_device(d, NULL, 0); +} #endif /* __ASM_MACH_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index b7aeaf574c36..6ae1ed7a0a9f 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -1,10 +1,18 @@ #ifndef __ASM_MACH_PXA910_H #define __ASM_MACH_PXA910_H +#include <linux/i2c.h> #include <mach/devices.h> +#include <plat/i2c.h> extern struct pxa_device_desc pxa910_device_uart1; extern struct pxa_device_desc pxa910_device_uart2; +extern struct pxa_device_desc pxa910_device_twsi0; +extern struct pxa_device_desc pxa910_device_twsi1; +extern struct pxa_device_desc pxa910_device_pwm1; +extern struct pxa_device_desc pxa910_device_pwm2; +extern struct pxa_device_desc pxa910_device_pwm3; +extern struct pxa_device_desc pxa910_device_pwm4; static inline int pxa910_add_uart(int id) { @@ -20,4 +28,40 @@ static inline int pxa910_add_uart(int id) return pxa_register_device(d, NULL, 0); } + +static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data, + struct i2c_board_info *info, unsigned size) +{ + struct pxa_device_desc *d = NULL; + int ret; + + switch (id) { + case 0: d = &pxa910_device_twsi0; break; + case 1: d = &pxa910_device_twsi1; break; + default: + return -EINVAL; + } + + ret = i2c_register_board_info(id, info, size); + if (ret) + return ret; + + return pxa_register_device(d, data, sizeof(*data)); +} + +static inline int pxa910_add_pwm(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa910_device_pwm1; break; + case 2: d = &pxa910_device_pwm2; break; + case 3: d = &pxa910_device_pwm3; break; + case 4: d = &pxa910_device_pwm4; break; + default: + return -EINVAL; + } + + return pxa_register_device(d, NULL, 0); +} #endif /* __ASM_MACH_PXA910_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index c6b8c9dc2026..98ccbee4bd0c 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -22,8 +22,10 @@ #define APBC_PXA168_UART1 APBC_REG(0x000) #define APBC_PXA168_UART2 APBC_REG(0x004) #define APBC_PXA168_GPIO APBC_REG(0x008) -#define APBC_PXA168_PWM0 APBC_REG(0x00c) -#define APBC_PXA168_PWM1 APBC_REG(0x010) +#define APBC_PXA168_PWM1 APBC_REG(0x00c) +#define APBC_PXA168_PWM2 APBC_REG(0x010) +#define APBC_PXA168_PWM3 APBC_REG(0x014) +#define APBC_PXA168_PWM4 APBC_REG(0x018) #define APBC_PXA168_SSP1 APBC_REG(0x01c) #define APBC_PXA168_SSP2 APBC_REG(0x020) #define APBC_PXA168_RTC APBC_REG(0x028) @@ -48,10 +50,10 @@ #define APBC_PXA910_UART0 APBC_REG(0x000) #define APBC_PXA910_UART1 APBC_REG(0x004) #define APBC_PXA910_GPIO APBC_REG(0x008) -#define APBC_PXA910_PWM0 APBC_REG(0x00c) -#define APBC_PXA910_PWM1 APBC_REG(0x010) -#define APBC_PXA910_PWM2 APBC_REG(0x014) -#define APBC_PXA910_PWM3 APBC_REG(0x018) +#define APBC_PXA910_PWM1 APBC_REG(0x00c) +#define APBC_PXA910_PWM2 APBC_REG(0x010) +#define APBC_PXA910_PWM3 APBC_REG(0x014) +#define APBC_PXA910_PWM4 APBC_REG(0x018) #define APBC_PXA910_SSP1 APBC_REG(0x01c) #define APBC_PXA910_SSP2 APBC_REG(0x020) #define APBC_PXA910_IPC APBC_REG(0x024) diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index ae924468658c..71b1ae338753 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -65,11 +65,23 @@ void __init pxa168_init_irq(void) /* APB peripheral clocks */ static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); +static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); +static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); +static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); +static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); +static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), }; static int __init pxa168_init(void) @@ -109,3 +121,9 @@ struct sys_timer pxa168_timer = { /* on-chip devices */ PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); +PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); +PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); +PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10); +PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10); +PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); +PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 453f8f7758bf..5882ca6b49fb 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -103,11 +103,23 @@ void __init pxa910_init_irq(void) /* APB peripheral clocks */ static APBC_CLK(uart1, PXA910_UART0, 1, 14745600); static APBC_CLK(uart2, PXA910_UART1, 1, 14745600); +static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); +static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000); +static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); +static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); +static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); /* device and clock bindings */ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), }; static int __init pxa910_init(void) @@ -156,3 +168,9 @@ struct sys_timer pxa910_timer = { */ PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22); PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24); +PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); +PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); +PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10); +PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); +PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); +PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index f289b0ea7dcf..22b4ff893b3c 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void) { int i; + /* Initialize gpiolib. */ + orion_gpio_init(); + orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF)); diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c index 0dec6f300ffc..7622c9b38c97 100644 --- a/arch/arm/mach-mx1/generic.c +++ b/arch/arm/mach-mx1/generic.c @@ -26,6 +26,7 @@ #include <asm/mach/map.h> +#include <mach/common.h> #include <mach/hardware.h> static struct map_desc imx_io_desc[] __initdata = { @@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = { } }; -void __init mxc_map_io(void) +void __init mx1_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX1); + iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index e54057fb855b..e5b0c0a83c3b 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -12,77 +12,56 @@ * warranty of any kind, whether express or implied. */ -#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/i2c/pcf857x.h> #include <linux/init.h> +#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> -#include <linux/i2c.h> -#include <linux/i2c/pcf857x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/irqs.h> -#include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> -#include <mach/irqs.h> +#include <mach/hardware.h> #include <mach/i2c.h> +#include <mach/imx-uart.h> #include <mach/iomux.h> +#include <mach/irqs.h> + #include "devices.h" -/* - * UARTs platform data - */ -static int mxc_uart1_pins[] = { +static int mx1ads_pins[] = { + /* UART1 */ PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, PC11_PF_UART1_TXD, PC12_PF_UART1_RXD, -}; - -static int uart1_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static int uart1_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { + /* UART2 */ PB28_PF_UART2_CTS, PB29_PF_UART2_RTS, PB30_PF_UART2_TXD, PB31_PF_UART2_RXD, + /* I2C */ + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, + /* SPI */ + PC13_PF_SPI1_SPI_RDY, + PC14_PF_SPI1_SCLK, + PC15_PF_SPI1_SS, + PC16_PF_SPI1_MISO, + PC17_PF_SPI1_MOSI, }; -static int uart2_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} - -static int uart2_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} +/* + * UARTs platform data + */ static struct imxuart_platform_data uart_pdata[] = { { - .init = uart1_mxc_init, - .exit = uart1_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart2_mxc_init, - .exit = uart2_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; @@ -111,24 +90,6 @@ static struct platform_device flash_device = { /* * I2C */ - -static int i2c_pins[] = { - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, -}; - -static int i2c_init(struct device *dev) -{ - return mxc_gpio_setup_multiple_pins(i2c_pins, - ARRAY_SIZE(i2c_pins), "I2C"); -} - -static void i2c_exit(struct device *dev) -{ - mxc_gpio_release_multiple_pins(i2c_pins, - ARRAY_SIZE(i2c_pins)); -} - static struct pcf857x_platform_data pcf857x_data[] = { { .gpio_base = 4 * 32, @@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = { static struct imxi2c_platform_data mx1ads_i2c_data = { .bitrate = 100000, - .init = i2c_init, - .exit = i2c_exit, }; static struct i2c_board_info mx1ads_i2c_devices[] = { @@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + mxc_gpio_setup_multiple_pins(mx1ads_pins, + ARRAY_SIZE(mx1ads_pins), "mx1ads"); + /* UART */ mxc_register_device(&imx_uart1_device, &uart_pdata[0]); mxc_register_device(&imx_uart2_device, &uart_pdata[1]); @@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, @@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c index 0e71f3fa28bf..20e0b5bcdffc 100644 --- a/arch/arm/mach-mx1/scb9328.c +++ b/arch/arm/mach-mx1/scb9328.c @@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .phys_io = 0x00200000, .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, .boot_params = 0x08000100, - .map_io = mxc_map_io, + .map_io = mx1_map_io, .init_irq = mxc_init_irq, .timer = &scb9328_timer, .init_machine = scb9328_init, diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 42a788842f49..c77da586b71d 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -18,6 +18,13 @@ endchoice comment "MX2 platforms:" +config MACH_MX21ADS + bool "MX21ADS platform" + depends on MACH_MX21 + help + Include support for MX21ADS platform. This includes specific + configurations for the board and its peripherals. + config MACH_MX27ADS bool "MX27ADS platform" depends on MACH_MX27 @@ -46,4 +53,18 @@ config MACH_PCM970_BASEBOARD endchoice +config MACH_MX27_3DS + bool "MX27PDK platform" + depends on MACH_MX27 + help + Include support for MX27PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX27LITE + bool "LogicPD MX27 LITEKIT platform" + depends on MACH_MX27 + help + Include support for MX27 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 950649a91540..b9b1cca4e9bc 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -11,6 +11,10 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o +obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o obj-$(CONFIG_MACH_PCM038) += pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o +obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o +obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o + diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index e4b08ca804ea..0850fb88ec15 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -48,6 +48,25 @@ static void _clk_disable(struct clk *clk) __raw_writel(reg, clk->enable_reg); } +static unsigned long _clk_generic_round_rate(struct clk *clk, + unsigned long rate, + u32 max_divisor) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > max_divisor) + div = max_divisor; + + return parent_rate / div; +} + static int _clk_spll_enable(struct clk *clk) { u32 reg; @@ -78,19 +97,7 @@ static void _clk_spll_disable(struct clk *clk) static unsigned long _clk_perclkx_round_rate(struct clk *clk, unsigned long rate) { - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div > 64) - div = 64; - - return parent_rate / div; + return _clk_generic_round_rate(clk, rate, 64); } static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate) @@ -130,6 +137,32 @@ static unsigned long _clk_usb_recalc(struct clk *clk) return parent_rate / (usb_pdf + 1U); } +static unsigned long _clk_usb_round_rate(struct clk *clk, + unsigned long rate) +{ + return _clk_generic_round_rate(clk, rate, 8); +} + +static int _clk_usb_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = CSCR() & ~CCM_CSCR_USB_MASK; + reg |= div << CCM_CSCR_USB_OFFSET; + __raw_writel(reg, CCM_CSCR); + + return 0; +} + static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf) { unsigned long parent_rate; @@ -595,11 +628,14 @@ static struct clk csi_clk[] = { static struct clk usb_clk[] = { { .parent = &spll_clk, + .secondary = &usb_clk[1], .get_rate = _clk_usb_recalc, .enable = _clk_enable, .enable_reg = CCM_PCCR_USBOTG_REG, .enable_shift = CCM_PCCR_USBOTG_OFFSET, .disable = _clk_disable, + .round_rate = _clk_usb_round_rate, + .set_rate = _clk_usb_set_rate, }, { .parent = &hclk_clk, .enable = _clk_enable, @@ -768,18 +804,7 @@ static struct clk rtc_clk = { static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate) { - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div > 8) - div = 8; - - return parent_rate / div; + return _clk_generic_round_rate(clk, rate, 8); } static int _clk_clko_set_rate(struct clk *clk, unsigned long rate) @@ -921,7 +946,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) - _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) + _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0]) _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c index bd51dd04948e..169372f69d8f 100644 --- a/arch/arm/mach-mx2/generic.c +++ b/arch/arm/mach-mx2/generic.c @@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = { * system startup to create static physical to virtual * memory map for the IO modules. */ -void __init mxc_map_io(void) +void __init mx21_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX21); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } + +void __init mx27_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX27); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c new file mode 100644 index 000000000000..a5ee461cb405 --- /dev/null +++ b/arch/arm/mach-mx2/mx21ads.c @@ -0,0 +1,286 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/gpio.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <mach/imx-uart.h> +#include <mach/imxfb.h> +#include <mach/iomux.h> +#include <mach/mxc_nand.h> +#include <mach/mmc.h> +#include <mach/board-mx21ads.h> + +#include "devices.h" + +static unsigned int mx21ads_pins[] = { + + /* CS8900A */ + (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), + + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + + /* UART3 (IrDA) - only TXD and RXD */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + + /* UART4 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + + /* LCDC */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA24_PF_REV, /* Sharp panel dedicated signal */ + PA25_PF_CLS, /* Sharp panel dedicated signal */ + PA26_PF_PS, /* Sharp panel dedicated signal */ + PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */ + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + + /* MMC/SDHC */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + + /* NFC */ + PF0_PF_NRFB, + PF1_PF_NFCE, + PF2_PF_NFWP, + PF3_PF_NFCLE, + PF4_PF_NFALE, + PF5_PF_NFRE, + PF6_PF_NFWE, + PF7_PF_NFIO0, + PF8_PF_NFIO1, + PF9_PF_NFIO2, + PF10_PF_NFIO3, + PF11_PF_NFIO4, + PF12_PF_NFIO5, + PF13_PF_NFIO6, + PF14_PF_NFIO7, +}; + +/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */ +static struct physmap_flash_data mx21ads_flash_data = { + .width = 4, +}; + +static struct resource mx21ads_flash_resource = { + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + 0x02000000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx21ads_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx21ads_flash_data, + }, + .num_resources = 1, + .resource = &mx21ads_flash_resource, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct imxuart_platform_data uart_norts_pdata = { +}; + + +static int mx21ads_fb_init(struct platform_device *pdev) +{ + u16 tmp; + + tmp = __raw_readw(MX21ADS_IO_REG); + tmp |= MX21ADS_IO_LCDON; + __raw_writew(tmp, MX21ADS_IO_REG); + return 0; +} + +static void mx21ads_fb_exit(struct platform_device *pdev) +{ + u16 tmp; + + tmp = __raw_readw(MX21ADS_IO_REG); + tmp &= ~MX21ADS_IO_LCDON; + __raw_writew(tmp, MX21ADS_IO_REG); +} + +/* + * Connected is a portrait Sharp-QVGA display + * of type: LQ035Q7DB02 + */ +static struct imx_fb_platform_data mx21ads_fb_data = { + .pixclock = 188679, /* in ps */ + .xres = 240, + .yres = 320, + + .bpp = 16, + .hsync_len = 2, + .left_margin = 6, + .right_margin = 16, + + .vsync_len = 1, + .upper_margin = 8, + .lower_margin = 10, + .fixed_screen_cpu = 0, + + .pcr = 0xFB108BC7, + .pwmr = 0x00A901ff, + .lscr1 = 0x00120300, + .dmacr = 0x00020008, + + .init = mx21ads_fb_init, + .exit = mx21ads_fb_exit, +}; + +static int mx21ads_sdhc_get_ro(struct device *dev) +{ + return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; +} + +static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = request_irq(IRQ_GPIOD(25), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); + if (ret) + goto out; + return 0; +out: + return ret; +} + +static void mx21ads_sdhc_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOD(25), data); +} + +static struct imxmmc_platform_data mx21ads_sdhc_pdata = { + .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */ + .get_ro = mx21ads_sdhc_get_ro, + .init = mx21ads_sdhc_init, + .exit = mx21ads_sdhc_exit, +}; + +static struct mxc_nand_platform_data mx21ads_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct map_desc mx21ads_io_desc[] __initdata = { + /* + * Memory-mapped I/O on MX21ADS Base board: + * - CS8900A Ethernet controller + * - ST16C2552CJ UART + * - CPU and Base board version + * - Base board I/O register + */ + { + .virtual = MX21ADS_MMIO_BASE_ADDR, + .pfn = __phys_to_pfn(CS1_BASE_ADDR), + .length = MX21ADS_MMIO_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init mx21ads_map_io(void) +{ + mx21_map_io(); + iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); +} + +static struct platform_device *platform_devices[] __initdata = { + &mx21ads_nor_mtd_device, +}; + +static void __init mx21ads_board_init(void) +{ + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), + "mx21ads"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_norts_pdata); + mxc_register_device(&mxc_uart_device3, &uart_pdata); + mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); + mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); + mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx21ads_timer_init(void) +{ + mx21_clocks_init(32768, 26000000); +} + +static struct sys_timer mx21ads_timer = { + .init = mx21ads_timer_init, +}; + +MACHINE_START(MX21ADS, "Freescale i.MX21ADS") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx21ads_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx21ads_board_init, + .timer = &mx21ads_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c index 4a3b097adc12..02daddac6995 100644 --- a/arch/arm/mach-mx2/mx27ads.c +++ b/arch/arm/mach-mx2/mx27ads.c @@ -23,6 +23,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/irq.h> #include <mach/common.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -33,9 +35,117 @@ #include <mach/imx-uart.h> #include <mach/iomux.h> #include <mach/board-mx27ads.h> +#include <mach/mxc_nand.h> +#include <mach/i2c.h> +#include <mach/imxfb.h> +#include <mach/mmc.h> #include "devices.h" +static unsigned int mx27ads_pins[] = { + /* UART0 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART1 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART2 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* UART3 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* UART4 */ + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS, + /* UART5 */ + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* FB */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* OWIRE */ + PE16_AF_OWIRE, + /* SDHC1*/ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* SDHC2*/ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +}; + +static struct mxc_nand_platform_data mx27ads_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + /* ADS's NOR flash */ static struct physmap_flash_data mx27ads_flash_data = { .width = 2, @@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = { .resource = &mx27ads_flash_resource, }; -static int mxc_uart0_pins[] = { - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS +static struct imxi2c_platform_data mx27ads_i2c_data = { + .bitrate = 100000, }; -static int uart_mxc_port0_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins), "UART0"); -} - -static int uart_mxc_port0_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins)); - return 0; -} - -static int mxc_uart1_pins[] = { - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD +static struct i2c_board_info mx27ads_i2c_devices[] = { }; -static int uart_mxc_port1_init(struct platform_device *pdev) +void lcd_power(int on) { - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); + if (on) + __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); + else + __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } -static int uart_mxc_port1_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS +static struct imx_fb_platform_data mx27ads_fb_data = { + .pixclock = 188679, + .xres = 240, + .yres = 320, + + .bpp = 16, + .hsync_len = 1, + .left_margin = 9, + .right_margin = 16, + + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 9, + .fixed_screen_cpu = 0, + + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pcr = 0xFB008BC0, + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, + + .lcd_power = lcd_power, }; -static int uart_mxc_port2_init(struct platform_device *pdev) +static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); + return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING, + "sdhc1-card-detect", data); } -static int uart_mxc_port2_exit(struct platform_device *pdev) +static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; + return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING, + "sdhc2-card-detect", data); } -static int mxc_uart3_pins[] = { - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD -}; - -static int uart_mxc_port3_init(struct platform_device *pdev) +static void mx27ads_sdhc1_exit(struct device *dev, void *data) { - return mxc_gpio_setup_multiple_pins(mxc_uart3_pins, - ARRAY_SIZE(mxc_uart3_pins), "UART3"); + free_irq(IRQ_GPIOE(21), data); } -static int uart_mxc_port3_exit(struct platform_device *pdev) +static void mx27ads_sdhc2_exit(struct device *dev, void *data) { - mxc_gpio_release_multiple_pins(mxc_uart3_pins, - ARRAY_SIZE(mxc_uart3_pins)); - return 0; + free_irq(IRQ_GPIOB(7), data); } -static int mxc_uart4_pins[] = { - PB18_AF_UART5_TXD, - PB19_AF_UART5_RXD, - PB20_AF_UART5_CTS, - PB21_AF_UART5_RTS +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mx27ads_sdhc1_init, + .exit = mx27ads_sdhc1_exit, }; -static int uart_mxc_port4_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart4_pins, - ARRAY_SIZE(mxc_uart4_pins), "UART4"); -} - -static int uart_mxc_port4_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart4_pins, - ARRAY_SIZE(mxc_uart4_pins)); - return 0; -} - -static int mxc_uart5_pins[] = { - PB10_AF_UART6_TXD, - PB12_AF_UART6_CTS, - PB11_AF_UART6_RXD, - PB13_AF_UART6_RTS +static struct imxmmc_platform_data sdhc2_pdata = { + .init = mx27ads_sdhc2_init, + .exit = mx27ads_sdhc2_exit, }; -static int uart_mxc_port5_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart5_pins, - ARRAY_SIZE(mxc_uart5_pins), "UART5"); -} - -static int uart_mxc_port5_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart5_pins, - ARRAY_SIZE(mxc_uart5_pins)); - return 0; -} - static struct platform_device *platform_devices[] __initdata = { &mx27ads_nor_mtd_device, &mxc_fec_device, + &mxc_w1_master_device, }; -static int mxc_fec_pins[] = { - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN -}; - -static void gpio_fec_active(void) -{ - mxc_gpio_setup_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins), "FEC"); -} - static struct imxuart_platform_data uart_pdata[] = { { - .init = uart_mxc_port0_init, - .exit = uart_mxc_port0_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port1_init, - .exit = uart_mxc_port1_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port2_init, - .exit = uart_mxc_port2_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port3_init, - .exit = uart_mxc_port3_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port4_init, - .exit = uart_mxc_port4_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port5_init, - .exit = uart_mxc_port5_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; static void __init mx27ads_board_init(void) { - gpio_fec_active(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), + "mx27ads"); mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); @@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void) mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); + mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info); + + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, mx27ads_i2c_devices, + ARRAY_SIZE(mx27ads_i2c_devices)); + mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data); + mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); + mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = { static void __init mx27ads_map_io(void) { - mxc_map_io(); + mx27_map_io(); iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); } diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c new file mode 100644 index 000000000000..3ae11cb8c04b --- /dev/null +++ b/arch/arm/mach-mx2/mx27lite.c @@ -0,0 +1,95 @@ +/* + * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux.h> +#include <mach/board-mx27lite.h> + +#include "devices.h" + +static unsigned int mx27lite_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static void __init mx27lite_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), + "imx27lite"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27lite_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mx27lite_timer = { + .init = mx27lite_timer_init, +}; + +MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27lite_init, + .timer = &mx27lite_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c new file mode 100644 index 000000000000..1d9238c7a6c3 --- /dev/null +++ b/arch/arm/mach-mx2/mx27pdk.c @@ -0,0 +1,95 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux.h> +#include <mach/board-mx27pdk.h> + +#include "devices.h" + +static unsigned int mx27pdk_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static void __init mx27pdk_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), + "mx27pdk"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27pdk_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mx27pdk_timer = { + .init = mx27pdk_timer_init, +}; + +MACHINE_START(MX27_3DS, "Freescale MX27PDK") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27pdk_init, + .timer = &mx27pdk_timer, +MACHINE_END diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index aa4eaa61d1b5..a4628d004343 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -17,28 +17,84 @@ * MA 02110-1301, USA. */ -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/io.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> +#include <linux/io.h> +#include <linux/mtd/plat-ram.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> -#include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/board-pcm038.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/iomux.h> -#ifdef CONFIG_I2C_IMX #include <mach/i2c.h> -#endif -#include <asm/mach/time.h> +#include <mach/iomux.h> #include <mach/imx-uart.h> -#include <mach/board-pcm038.h> #include <mach/mxc_nand.h> #include "devices.h" +static int pcm038_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART2 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART3 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* SPI1 */ + PD25_PF_CSPI1_RDY, + PD27_PF_CSPI1_SS1, + PD28_PF_CSPI1_SS0, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* SSI4 */ + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD, + PC18_PF_SSI4_TXD, + PC19_PF_SSI4_CLK, +}; + /* * Phytec's PCM038 comes with 2MiB battery buffered SRAM, * 16 bit width @@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = { .resource = &pcm038_flash_resource, }; -static int mxc_uart0_pins[] = { - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS -}; - -static int uart_mxc_port0_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins), "UART0"); -} - -static int uart_mxc_port0_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart0_pins, - ARRAY_SIZE(mxc_uart0_pins)); - return 0; -} - -static int mxc_uart1_pins[] = { - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD -}; - -static int uart_mxc_port1_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static int uart_mxc_port1_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); - return 0; -} - -static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS }; - -static int uart_mxc_port2_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins), "UART2"); -} - -static int uart_mxc_port2_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart2_pins, - ARRAY_SIZE(mxc_uart2_pins)); - return 0; -} - static struct imxuart_platform_data uart_pdata[] = { { - .init = uart_mxc_port0_init, - .exit = uart_mxc_port0_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port1_init, - .exit = uart_mxc_port1_exit, .flags = IMXUART_HAVE_RTSCTS, }, { - .init = uart_mxc_port2_init, - .exit = uart_mxc_port2_exit, .flags = IMXUART_HAVE_RTSCTS, }, }; -static int mxc_fec_pins[] = { - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN -}; - -static void gpio_fec_active(void) -{ - mxc_gpio_setup_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins), "FEC"); -} - static struct mxc_nand_platform_data pcm038_nand_board_info = { .width = 1, .hw_ecc = 1, @@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void) __raw_writel(0x22220a00, CSCR_A(1)); } -#ifdef CONFIG_I2C_IMX -static int mxc_i2c1_pins[] = { - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL -}; - -static int pcm038_i2c_1_init(struct device *dev) -{ - return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins), - "I2C1"); -} - -static void pcm038_i2c_1_exit(struct device *dev) -{ - mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins)); -} - static struct imxi2c_platform_data pcm038_i2c_1_data = { .bitrate = 100000, - .init = pcm038_i2c_1_init, - .exit = pcm038_i2c_1_exit, }; static struct at24_platform_data board_eeprom = { @@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = { .type = "lm75" } }; -#endif static void __init pcm038_init(void) { - gpio_fec_active(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), + "PCM038"); + pcm038_init_sram(); mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); @@ -267,13 +214,11 @@ static void __init pcm038_init(void) mxc_gpio_mode(PE16_AF_OWIRE); mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info); -#ifdef CONFIG_I2C_IMX /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); -#endif platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); @@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .phys_io = AIPI_BASE_ADDR, .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx27_map_io, .init_irq = mxc_init_irq, .init_machine = pcm038_init, .timer = &pcm038_timer, diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index bf4e520bc1bc..6a3acaf57dd4 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -16,71 +16,107 @@ * MA 02110-1301, USA. */ -#include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/irq.h> +#include <linux/platform_device.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> #include <mach/common.h> -#include <mach/mmc.h> -#include <mach/imxfb.h> #include <mach/iomux.h> +#include <mach/imxfb.h> +#include <mach/hardware.h> +#include <mach/mmc.h> #include "devices.h" -static int pcm970_sdhc2_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PORTC + 28); -} - -static int pcm970_sdhc2_pins[] = { +static int pcm970_pins[] = { + /* SDHC */ PB4_PF_SD2_D0, PB5_PF_SD2_D1, PB6_PF_SD2_D2, PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, + GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */ + /* display */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA24_PF_REV, + PA25_PF_CLS, + PA26_PF_PS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* + * it seems the data line misses a pullup, so we must enable + * the internal pullup as a local workaround + */ + PD17_PF_I2C_DATA | GPIO_PUEN, + PD18_PF_I2C_CLK, + /* Camera */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, }; +static int pcm970_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_PORTC + 28); +} + static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { int ret; - ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2"); - if(ret) - return ret; - - ret = request_irq(IRQ_GPIOC(29), detect_irq, 0, + ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) - goto out_release_gpio; - - set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING); + return ret; ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); - if (ret) - goto out_release_gpio; + if (ret) { + free_irq(IRQ_GPIOC(29), data); + return ret; + } - mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN); gpio_direction_input(GPIO_PORTC + 28); return 0; - -out_release_gpio: - mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins)); - return ret; } static void pcm970_sdhc2_exit(struct device *dev, void *data) { free_irq(IRQ_GPIOC(29), data); gpio_free(GPIO_PORTC + 28); - mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, - ARRAY_SIZE(pcm970_sdhc2_pins)); } static struct imxmmc_platform_data sdhc_pdata = { @@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pcm970_sdhc2_exit, }; -static int mxc_fb_pins[] = { - PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2, - PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6, - PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10, - PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14, - PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV, - PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC, - PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD -}; - -static int pcm038_fb_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_fb_pins, - ARRAY_SIZE(mxc_fb_pins), "FB"); -} - -static int pcm038_fb_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins)); - - return 0; -} - /* * Connected is a portrait Sharp-QVGA display * of type: LQ035Q7DH06 @@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = { .pwmr = 0x00A903FF, .lscr1 = 0x00120300, .dmacr = 0x00020010, - - .init = pcm038_fb_init, - .exit = pcm038_fb_exit, }; /* @@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = { */ void __init pcm970_baseboard_init(void) { + mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins), + "PCM970"); + mxc_register_device(&mxc_fb_device, &pcm038_fb_data); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 194b8428bba4..17a21a291e2f 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -1,10 +1,12 @@ if ARCH_MX3 config ARCH_MX31 + select ARCH_HAS_RNGA bool config ARCH_MX35 bool + select ARCH_MXC_IOMUX_V3 comment "MX3 platforms:" @@ -37,7 +39,6 @@ config MACH_PCM037 config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 - default n help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -45,7 +46,6 @@ config MACH_MX31LITE config MACH_MX31_3DS bool "Support MX31PDK (3DS)" select ARCH_MX31 - default n help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. @@ -53,17 +53,43 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 - default n help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31LILLY + bool "Support MX31 LILLY-1131 platforms (INCO startec)" + select ARCH_MX31 + help + Include support for mx31 based LILLY1131 modules. This includes + specific configurations for the board and its peripherals. + config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" select ARCH_MX31 - default n help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM043 + bool "Support Phytec pcm043 (i.MX35) platforms" + select ARCH_MX35 + help + Include support for Phytec pcm043 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_ARMADILLO5X0 + bool "Support Atmark Armadillo-500 Development Base Board" + select ARCH_MX31 + help + Include support for Atmark Armadillo-500 platform. This includes + specific configurations for the board and its peripherals. + +config MACH_MX35_3DS + bool "Support MX35PDK platform" + select ARCH_MX35 + default n + help + Include support for MX35PDK platform. This includes specific + configurations for the board and its peripherals. endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 272c8a953b30..0322696bd11a 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -8,9 +8,13 @@ obj-y := mm.o devices.o obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o obj-$(CONFIG_ARCH_MX35) += clock-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o +obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o obj-$(CONFIG_MACH_QONG) += qong.o +obj-$(CONFIG_MACH_PCM043) += pcm043.o +obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o +obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c new file mode 100644 index 000000000000..541181090b37 --- /dev/null +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -0,0 +1,295 @@ +/* + * armadillo5x0.c + * + * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * updates in http://alberdroid.blogspot.com/ + * + * Based on Atmark Techno, Inc. armadillo 500 BSP 2008 + * Based on mx31ads.c and pcm037.c Great Work! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/memory.h> +#include <asm/mach/map.h> + +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/board-armadillo5x0.h> +#include <mach/mmc.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> + +#include "devices.h" + +static int armadillo5x0_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* UART2 */ + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + /* LAN9118_IRQ */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ + +}; + +/* + * FB support + */ +static const struct fb_videomode fb_modedb[] = { + { /* 640x480 @ 60 Hz */ + .name = "CRT-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 35, + .right_margin = 115, + .upper_margin = 43, + .lower_margin = 1, + .hsync_len = 10, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, {/* 800x600 @ 56 Hz */ + .name = "CRT-SVGA", + .refresh = 56, + .xres = 800, + .yres = 600, + .pixclock = 30000, + .left_margin = 30, + .right_margin = 108, + .upper_margin = 13, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT | + FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "CRT-VGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +/* + * SDHC 1 + * MMC support + */ +static int armadillo5x0_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); +} + +static int armadillo5x0_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + int gpio_det, gpio_wp; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B); + + ret = gpio_request(gpio_det, "sdhc-card-detect"); + if (ret) + return ret; + + gpio_direction_input(gpio_det); + + ret = gpio_request(gpio_wp, "sdhc-write-protect"); + if (ret) + goto err_gpio_free; + + gpio_direction_input(gpio_wp); + + /* When supported the trigger type have to be BOTH */ + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "sdhc-detect", data); + + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(gpio_wp); + +err_gpio_free: + gpio_free(gpio_det); + + return ret; + +} + +static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); + gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); +} + +static struct imxmmc_platform_data sdhc_pdata = { + .get_ro = armadillo5x0_sdhc1_get_ro, + .init = armadillo5x0_sdhc1_init, + .exit = armadillo5x0_sdhc1_exit, +}; + +/* + * SMSC 9118 + * Network support + */ +static struct resource armadillo5x0_smc911x_resources[] = { + { + .start = CS3_BASE_ADDR, + .end = CS3_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_info = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device armadillo5x0_smc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources), + .resource = armadillo5x0_smc911x_resources, + .dev = { + .platform_data = &smsc911x_info, + }, +}; + +/* UART device data */ +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &armadillo5x0_smc911x_device, +}; + +/* + * Perform board specific initializations + */ +static void __init armadillo5x0_init(void) +{ + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, + ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* Register UART */ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + /* SMSC9118 IRQ pin */ + gpio_direction_input(MX31_PIN_GPIO1_0); + + /* Register SDHC */ + mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + + /* Register FB */ + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); +} + +static void __init armadillo5x0_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer armadillo5x0_timer = { + .init = armadillo5x0_timer_init, +}; + +MACHINE_START(ARMADILLO5X0, "Armadillo-500") + /* Maintainer: Alberto Panizzo */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = mx31_map_io, + .init_irq = mxc_init_irq, + .timer = &armadillo5x0_timer, + .init_machine = armadillo5x0_init, +MACHINE_END diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 3c1e06f56dd6..577ee83d1f60 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = { { .arm = 0, .ahb = 0, .sel = 0}, }; -static struct arm_ahb_div clk_automotive[] = { - { .arm = 1, .ahb = 3, .sel = 0}, - { .arm = 1, .ahb = 2, .sel = 1}, - { .arm = 2, .ahb = 1, .sel = 1}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 1, .ahb = 6, .sel = 0}, - { .arm = 1, .ahb = 4, .sel = 1}, - { .arm = 2, .ahb = 2, .sel = 1}, - { .arm = 0, .ahb = 0, .sel = 0}, -}; - static unsigned long get_rate_arm(void) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); - if (pdr0 & 1) { - /* consumer path */ - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - if (aad->sel) - fref = fref * 2 / 3; - } else { - /* auto path */ - aad = &clk_automotive[(pdr0 >> 9) & 0x7]; - if (aad->sel) - fref = fref * 3 / 4; - } + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; + if (aad->sel) + fref = fref * 2 / 3; + return fref / aad->arm; } @@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk) struct arm_ahb_div *aad; unsigned long fref = get_rate_mpll(); - if (pdr0 & 1) - /* consumer path */ - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - else - /* auto path */ - aad = &clk_automotive[(pdr0 >> 9) & 0x7]; + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; return fref / aad->ahb; } @@ -430,7 +407,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk) - _REGISTER_CLOCK(NULL, "ipu", ipu_clk) + _REGISTER_CLOCK("ipu-core", NULL, ipu_clk) + _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk) _REGISTER_CLOCK(NULL, "kpp", kpp_clk) _REGISTER_CLOCK(NULL, "mlb", mlb_clk) _REGISTER_CLOCK(NULL, "mshc", mshc_clk) @@ -462,8 +440,6 @@ int __init mx35_clocks_init() int i; unsigned int ll = 0; - mxc_set_cpu_type(MXC_CPU_MX35); - #ifdef CONFIG_DEBUG_LL_CONSOLE ll = (3 << 16); #endif diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index a68fcf981edf..8b14239724c9 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -483,7 +483,7 @@ DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk); DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk); DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk); -DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk); +DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk); DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk); DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk); DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk); @@ -566,13 +566,18 @@ int __init mx31_clocks_init(unsigned long fref) u32 reg; int i; - mxc_set_cpu_type(MXC_CPU_MX31); - ckih_rate = fref; for (i = 0; i < ARRAY_SIZE(lookups); i++) clkdev_add(&lookups[i]); + /* change the csi_clk parent if necessary */ + reg = __raw_readl(MXC_CCM_CCMR); + if (!(reg & MXC_CCM_CCMR_CSCS)) + if (clk_set_parent(&csi_clk, &usb_pll_clk)) + pr_err("%s: error changing csi_clk parent\n", __func__); + + /* Turn off all possible clocks */ __raw_writel((3 << 4), MXC_CCM_CGR0); __raw_writel(0, MXC_CCM_CGR1); @@ -581,6 +586,12 @@ int __init mx31_clocks_init(unsigned long fref) MX32, but still required to be set */ MXC_CCM_CGR2); + /* + * Before turning off usb_pll make sure ipg_per_clk is generated + * by ipg_clk and not usb_pll. + */ + __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR); + usb_pll_disable(&usb_pll_clk); pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk)); diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 380be0c9b213..d927eddcad46 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -17,13 +17,17 @@ * Boston, MA 02110-1301, USA. */ +#include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/gpio.h> +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/common.h> #include <mach/imx-uart.h> +#include <mach/mx3_camera.h> #include "devices.h" @@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = { .num_resources = ARRAY_SIZE(mxcsdhc1_resources), .resource = mxcsdhc1_resources, }; + +static struct resource rnga_resources[] = { + { + .start = RNGA_BASE_ADDR, + .end = RNGA_BASE_ADDR + 0x28, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_rnga_device = { + .name = "mxc_rnga", + .id = -1, + .num_resources = 1, + .resource = rnga_resources, +}; #endif /* CONFIG_ARCH_MX31 */ /* i.MX31 Image Processing Unit */ @@ -329,10 +348,54 @@ struct platform_device mx3_fb = { .num_resources = ARRAY_SIZE(fb_resources), .resource = fb_resources, .dev = { - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; +static struct resource camera_resources[] = { + { + .start = IPU_CTRL_BASE_ADDR + 0x60, + .end = IPU_CTRL_BASE_ADDR + 0x87, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mx3_camera = { + .name = "mx3-camera", + .id = 0, + .num_resources = ARRAY_SIZE(camera_resources), + .resource = camera_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource otg_resources[] = { + { + .start = OTG_BASE_ADDR, + .end = OTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_USB3, + .end = MXC_INT_USB3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 otg_dmamask = DMA_BIT_MASK(32); + +/* OTG gadget device */ +struct platform_device mxc_otg_udc_device = { + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &otg_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = otg_resources, + .num_resources = ARRAY_SIZE(otg_resources), +}; + #ifdef CONFIG_ARCH_MX35 static struct resource mxc_fec_resources[] = { { @@ -359,6 +422,7 @@ static int mx3_devices_init(void) if (cpu_is_mx31()) { mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; + mxc_register_device(&mxc_rnga_device, NULL); } if (cpu_is_mx35()) { mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 88c04b296fab..ffd494ddd4ac 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -11,6 +11,10 @@ extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_i2c_device2; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; +extern struct platform_device mx3_camera; extern struct platform_device mxc_fec_device; extern struct platform_device mxcsdhc_device0; extern struct platform_device mxcsdhc_device1; +extern struct platform_device mxc_otg_udc_device; +extern struct platform_device mxc_rnga_device; + diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c index 40ffc5a664d9..c66ccbcdc11b 100644 --- a/arch/arm/mach-mx3/iomux.c +++ b/arch/arm/mach-mx3/iomux.c @@ -21,7 +21,6 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/kernel.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) EXPORT_SYMBOL(mxc_iomux_set_pad); /* - * setups a single pin: + * allocs a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ -int mxc_iomux_setup_pin(const unsigned int pin, const char *label) +int mxc_iomux_alloc_pin(const unsigned int pin, const char *label) { unsigned pad = pin & IOMUX_PADNUM_MASK; - unsigned gpio; if (pad >= (PIN_MAX + 1)) { printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", @@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label) if (test_and_set_bit(pad, mxc_pin_alloc_map)) { printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", pad, label ? label : "?"); - return -EINVAL; + return -EBUSY; } mxc_iomux_mode(pin); - /* if we have a gpio, we can allocate it */ - gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; - if (gpio < (GPIO_PORT_MAX + 1) * 32) - if (gpio_request(gpio, label)) - return -EINVAL; - return 0; } -EXPORT_SYMBOL(mxc_iomux_setup_pin); +EXPORT_SYMBOL(mxc_iomux_alloc_pin); int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, const char *label) @@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, int ret = -EINVAL; for (i = 0; i < count; i++) { - if (mxc_iomux_setup_pin(*p, label)) + ret = mxc_iomux_alloc_pin(*p, label); + if (ret) goto setup_error; p++; } @@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); void mxc_iomux_release_pin(const unsigned int pin) { unsigned pad = pin & IOMUX_PADNUM_MASK; - unsigned gpio; if (pad < (PIN_MAX + 1)) clear_bit(pad, mxc_pin_alloc_map); - - gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; - if (gpio < (GPIO_PORT_MAX + 1) * 32) - gpio_free(gpio); } EXPORT_SYMBOL(mxc_iomux_release_pin); diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 9e1459cb4b74..1f5fdd456cb9 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = { * system startup to create static physical to virtual memory mappings * for the IO modules. */ -void __init mxc_map_io(void) +void __init mx31_map_io(void) { + mxc_set_cpu_type(MXC_CPU_MX31); + + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + +void __init mx35_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index a6d6efefa6aa..30e2767a78ae 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void) /* * Configure INT line as GPIO input */ - mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); @@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = { */ static void __init mx31ads_map_io(void) { - mxc_map_io(); + mx31_map_io(); iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); } diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c new file mode 100644 index 000000000000..3b3a78f49c23 --- /dev/null +++ b/arch/arm/mach-mx3/mx31lilly-db.c @@ -0,0 +1,216 @@ +/* + * LILLY-1131 development board support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/board-mx31lilly.h> +#include <mach/mmc.h> +#include <mach/mx3fb.h> +#include <mach/ipu.h> + +#include "devices.h" + +/* + * This file contains board-specific initialization routines for the + * LILLY-1131 development board. If you design an own baseboard for the + * module, use this file as base for support code. + */ + +static unsigned int lilly_db_board_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_CONTRAST__CONTRAST, +}; + +/* UART */ +static struct imxuart_platform_data uart_pdata __initdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* MMC support */ + +static int mxc_mmc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); +} + +static int gpio_det, gpio_wp; + +static int mxc_mmc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1); + gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0); + + ret = gpio_request(gpio_det, "MMC detect"); + if (ret) + return ret; + + ret = gpio_request(gpio_wp, "MMC w/p"); + if (ret) + goto exit_free_det; + + gpio_direction_input(gpio_det); + gpio_direction_input(gpio_wp); + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "MMC detect", data); + if (ret) + goto exit_free_wp; + + return 0; + +exit_free_wp: + gpio_free(gpio_wp); + +exit_free_det: + gpio_free(gpio_det); + + return ret; +} + +static void mxc_mmc1_exit(struct device *dev, void *data) +{ + gpio_free(gpio_det); + gpio_free(gpio_wp); + free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); +} + +static struct imxmmc_platform_data mmc_pdata = { + .get_ro = mxc_mmc1_get_ro, + .init = mxc_mmc1_init, + .exit = mxc_mmc1_exit, +}; + +/* Framebuffer support */ +static struct ipu_platform_data ipu_data __initdata = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static const struct fb_videomode fb_modedb = { + /* 640x480 TFT panel (IPS-056T) */ + .name = "CRT-VGA", + .refresh = 64, + .xres = 640, + .yres = 480, + .pixclock = 30000, + .left_margin = 200, + .right_margin = 2, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 3, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct mx3fb_platform_data fb_pdata __initdata = { + .dma_dev = &mx3_ipu.dev, + .name = "CRT-VGA", + .mode = &fb_modedb, + .num_modes = 1, +}; + +#define LCD_VCC_EN_GPIO (7) + +static void __init mx31lilly_init_fb(void) +{ + if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) { + printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n"); + return; + } + + mxc_register_device(&mx3_ipu, &ipu_data); + mxc_register_device(&mx3_fb, &fb_pdata); + gpio_direction_output(LCD_VCC_EN_GPIO, 1); +} + +void __init mx31lilly_db_init(void) +{ + mxc_iomux_setup_multiple_pins(lilly_db_board_pins, + ARRAY_SIZE(lilly_db_board_pins), + "development board pins"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_pdata); + mxc_register_device(&mxcsdhc_device0, &mmc_pdata); + mx31lilly_init_fb(); +} + diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c new file mode 100644 index 000000000000..6ab2f163cb95 --- /dev/null +++ b/arch/arm/mach-mx3/mx31lilly.c @@ -0,0 +1,155 @@ +/* + * LILLY-1131 module support + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * based on code for other MX31 boards, + * + * Copyright 2005-2007 Freescale Semiconductor + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-mx3.h> +#include <mach/board-mx31lilly.h> + +#include "devices.h" + +/* + * This file contains module-specific initialization routines for LILLY-1131. + * Initialization of peripherals found on the baseboard is implemented in the + * appropriate baseboard support code. + */ + +/* SMSC ethernet support */ + +static struct resource smsc91x_resources[] = { + { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | + SMSC911X_SAVE_MAC_ADDRESS | + SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc91x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc91x_resources), + .resource = smsc91x_resources, + .dev = { + .platform_data = &smsc911x_config, + } +}; + +/* NOR flash */ +static struct physmap_flash_data nor_flash_data = { + .width = 2, +}; + +static struct resource nor_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device physmap_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &nor_flash_data, + }, + .resource = &nor_flash_resource, + .num_resources = 1, +}; + +static struct platform_device *devices[] __initdata = { + &smsc91x_device, + &physmap_flash_device, + &mxc_i2c_device1, +}; + +static int mx31lilly_baseboard; +core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); + +static void __init mx31lilly_board_init(void) +{ + switch (mx31lilly_baseboard) { + case MX31LILLY_NOBOARD: + break; + case MX31LILLY_DB: + mx31lilly_db_init(); + break; + default: + printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n", + mx31lilly_baseboard); + } + + mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL"); + mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA"); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init mx31lilly_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer mx31lilly_timer = { + .init = mx31lilly_timer_init, +}; + +MACHINE_START(LILLY1131, "INCO startec LILLY-1131") + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx31lilly_board_init, + .timer = &mx31lilly_timer, +MACHINE_END + diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index 894d98cd9941..86fe70fa3e13 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -22,6 +22,9 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/memory.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -32,11 +35,64 @@ #include <asm/page.h> #include <asm/setup.h> #include <mach/board-mx31lite.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/irqs.h> +#include <mach/mxc_nand.h> +#include "devices.h" /* * This file contains the board-specific initialization routines. */ +static unsigned int mx31lite_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* LAN9117 IRQ pin */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct mxc_nand_platform_data mx31lite_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = CS4_BASE_ADDR, + .end = CS4_BASE_ADDR + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + /* * This structure defines the MX31 memory map. */ @@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = { */ void __init mx31lite_map_io(void) { - mxc_map_io(); + mx31_map_io(); iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); } @@ -68,6 +124,22 @@ void __init mx31lite_map_io(void) */ static void __init mxc_board_init(void) { + int ret; + + mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), + "mx31lite"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info); + + /* SMSC9117 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + platform_device_register(&smsc911x_device); + } } static void __init mx31lite_timer_init(void) diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index d080b4add79c..4704405165a1 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -16,33 +16,142 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/types.h> +#include <linux/fsl_devices.h> +#include <linux/gpio.h> #include <linux/init.h> - +#include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/types.h> -#include <mach/hardware.h> #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/hardware.h> +#include <mach/mmc.h> #include "devices.h" +static unsigned int devboard_pins[] = { + /* UART1 */ + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, +}; + static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int mxc_uart1_pins[] = { - MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int devboard_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC2_WP); +} + +static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void devboard_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static struct imxmmc_platform_data sdhc2_pdata = { + .get_ro = devboard_sdhc2_get_ro, + .init = devboard_sdhc2_init, + .exit = devboard_sdhc2_exit, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, }; +#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void devboard_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ void __init mx31moboard_devboard_init(void) { printk(KERN_INFO "Initializing mx31devboard peripherals\n"); - mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1"); + + mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), + "devboard"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + devboard_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 9ef9566823fb..641c3d6153ae 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -16,22 +16,144 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/types.h> +#include <linux/fsl_devices.h> +#include <linux/gpio.h> #include <linux/init.h> - +#include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/types.h> -#include <mach/hardware.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/mmc.h> #include "devices.h" +static unsigned int marxbot_pins[] = { + /* SDHC2 */ + MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, + MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, + MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, + MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, + /* CSI */ + MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, + MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, + MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, + MX31_PIN_TXD2__GPIO1_28, + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + MX31_PIN_USB_OC__GPIO1_30, +}; + +#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) +#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) + +static int marxbot_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC2_WP); +} + +static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC2_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC2_CD); + + ret = gpio_request(SDHC2_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC2_WP); + + ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc2-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC2_WP); +err_gpio_free: + gpio_free(SDHC2_CD); + + return ret; +} + +static void marxbot_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC2_CD), data); + gpio_free(SDHC2_WP); + gpio_free(SDHC2_CD); +} + +static struct imxmmc_platform_data sdhc2_pdata = { + .get_ro = marxbot_sdhc2_get_ro, + .init = marxbot_sdhc2_init, + .exit = marxbot_sdhc2_exit, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST) +#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) + +static void marxbot_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG); + + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); +} + /* * system init for baseboard usage. Will be called by mx31moboard init. */ void __init mx31moboard_marxbot_init(void) { printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); + + mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), + "marxbot"); + + mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + + marxbot_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 34c2a1b99d4f..a17f2e411609 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -16,26 +16,47 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> - -#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/memory.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> -#include <linux/memory.h> +#include <linux/platform_device.h> +#include <linux/types.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <mach/board-mx31moboard.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/board-mx31moboard.h> +#include <mach/i2c.h> +#include <mach/mmc.h> #include "devices.h" +static unsigned int moboard_pins[] = { + /* UART0 */ + MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, + /* UART4 */ + MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + /* I2C0 */ + MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL, + /* I2C1 */ + MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD, + MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, +}; + static struct physmap_flash_data mx31moboard_flash_data = { .width = 2, }; @@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct platform_device *devices[] __initdata = { - &mx31moboard_flash, +static struct imxi2c_platform_data moboard_i2c0_pdata = { + .bitrate = 400000, }; -static int mxc_uart0_pins[] = { - MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, +static struct imxi2c_platform_data moboard_i2c1_pdata = { + .bitrate = 100000, }; -static int mxc_uart4_pins[] = { - MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, - MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, + +#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) +#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) + +static int moboard_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(SDHC1_WP); +} + +static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = gpio_request(SDHC1_CD, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_CD); + + ret = gpio_request(SDHC1_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_WP); + + ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "sdhc1-card-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: + gpio_free(SDHC1_WP); +err_gpio_free: + gpio_free(SDHC1_CD); + + return ret; +} + +static void moboard_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(SDHC1_CD), data); + gpio_free(SDHC1_WP); + gpio_free(SDHC1_CD); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .get_ro = moboard_sdhc1_get_ro, + .init = moboard_sdhc1_init, + .exit = moboard_sdhc1_exit, +}; + +static struct platform_device *devices[] __initdata = { + &mx31moboard_flash, }; static int mx31moboard_baseboard; @@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mxc_board_init(void) { + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), + "moboard"); + platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4"); mxc_register_device(&mxc_uart_device4, &uart_pdata); + mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); + mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); + + mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata); + switch (mx31moboard_baseboard) { case MX31NOBOARD: break; @@ -99,7 +177,8 @@ static void __init mxc_board_init(void) mx31moboard_marxbot_init(); break; default: - printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard); + printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", + mx31moboard_baseboard); } } @@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31moboard_timer, diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c index bc63f1785691..c19838d2e369 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mx31pdk.c @@ -20,6 +20,9 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/platform_device.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -41,21 +44,192 @@ * @ingroup System */ +static int mx31pdk_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), +}; + static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int uart_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 +/* + * Support for the SMSC9217 on the Debug board. + */ + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource smsc911x_resources[] = { + { + .start = LAN9217_BASE_ADDR, + .end = LAN9217_BASE_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = EXPIO_INT_ENET, + .end = EXPIO_INT_ENET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, }; -static inline void mxc_init_imx_uart(void) +/* + * Routines for the CPLD on the debug board. It contains a CPLD handling + * LEDs, switches, interrupts for Ethernet. + */ + +static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc) { - mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + uint32_t imr_val; + uint32_t int_valid; + uint32_t expio_irq; + + imr_val = __raw_readw(CPLD_INT_MASK_REG); + int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val; + + expio_irq = MXC_EXP_IO_BASE; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + if ((int_valid & 1) == 0) + continue; + generic_handle_irq(expio_irq); + } +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * @param irq an expio virtual irq number + */ +static void expio_mask_irq(uint32_t irq) +{ + uint16_t reg; + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* mask the interrupt */ + reg = __raw_readw(CPLD_INT_MASK_REG); + reg |= 1 << expio; + __raw_writew(reg, CPLD_INT_MASK_REG); +} + +/* + * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. + * @param irq an expanded io virtual irq number + */ +static void expio_ack_irq(uint32_t irq) +{ + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* clear the interrupt status */ + __raw_writew(1 << expio, CPLD_INT_RESET_REG); + __raw_writew(0, CPLD_INT_RESET_REG); + /* mask the interrupt */ + expio_mask_irq(irq); +} + +/* + * Enable a expio pin's interrupt by clearing the bit in the imr. + * @param irq a expio virtual irq number + */ +static void expio_unmask_irq(uint32_t irq) +{ + uint16_t reg; + uint32_t expio = MXC_IRQ_TO_EXPIO(irq); + + /* unmask the interrupt */ + reg = __raw_readw(CPLD_INT_MASK_REG); + reg &= ~(1 << expio); + __raw_writew(reg, CPLD_INT_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .ack = expio_ack_irq, + .mask = expio_mask_irq, + .unmask = expio_unmask_irq, +}; + +static int __init mx31pdk_init_expio(void) +{ + int i; + int ret; + + /* Check if there's a debug board connected */ + if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) || + (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) || + (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) { + /* No Debug board found */ + return -ENODEV; + } + + pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n", + __raw_readw(CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + + /* Disable the interrupts and clear the status */ + __raw_writew(0, CPLD_INT_MASK_REG); + __raw_writew(0xFFFF, CPLD_INT_RESET_REG); + __raw_writew(0, CPLD_INT_RESET_REG); + __raw_writew(0x1F, CPLD_INT_MASK_REG); + for (i = MXC_EXP_IO_BASE; + i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); + i++) { + set_irq_chip(i, &expio_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler); + + return 0; +} + +/* + * This structure defines the MX31 memory map. + */ +static struct map_desc mx31pdk_io_desc[] __initdata = { + { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_DEVICE_NONSHARED, + }, { + .virtual = CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS5_BASE_ADDR), + .length = CS5_SIZE, + .type = MT_DEVICE, + }, +}; + +/* + * Set up static virtual mappings. + */ +static void __init mx31pdk_map_io(void) +{ + mx31_map_io(); + iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc)); } /*! @@ -63,7 +237,13 @@ static inline void mxc_init_imx_uart(void) */ static void __init mxc_board_init(void) { - mxc_init_imx_uart(); + mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins), + "mx31pdk"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + if (!mx31pdk_init_expio()) + platform_device_register(&smsc911x_device); } static void __init mx31pdk_timer_init(void) @@ -84,7 +264,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31pdk_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31pdk_timer, diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c new file mode 100644 index 000000000000..6d15374414b9 --- /dev/null +++ b/arch/arm/mach-mx3/mx35pdk.c @@ -0,0 +1,104 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/memory.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx35.h> + +#include "devices.h" + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &mxc_fec_device, +}; + +static struct pad_desc mx35pdk_pads[] = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); +} + +static void __init mx35pdk_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer mx35pdk_timer = { + .init = mx35pdk_timer_init, +}; + +MACHINE_START(MX35_3DS, "Freescale MX35PDK") + /* Maintainer: Freescale Semiconductor, Inc */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &mx35pdk_timer, +MACHINE_END diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index b5227d837b2f..c6f61a1f06c8 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -28,6 +28,10 @@ #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <linux/irq.h> +#include <linux/fsl_devices.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -37,7 +41,9 @@ #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/ipu.h> #include <mach/board-pcm037.h> +#include <mach/mx3fb.h> #include <mach/mxc_nand.h> #include <mach/mmc.h> #ifdef CONFIG_I2C_IMX @@ -46,6 +52,76 @@ #include "devices.h" +static unsigned int pcm037_pins[] = { + /* I2C */ + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, + /* SDHC1 */ + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, + IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */ + IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */ + /* SPI1 */ + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* UART2 */ + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + /* UART3 */ + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, + /* LAN9217 irq pin */ + IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), + /* Onewire */ + MX31_PIN_BATT_LINE__OWIRE, + /* Framebuffer */ + MX31_PIN_LD0__LD0, + MX31_PIN_LD1__LD1, + MX31_PIN_LD2__LD2, + MX31_PIN_LD3__LD3, + MX31_PIN_LD4__LD4, + MX31_PIN_LD5__LD5, + MX31_PIN_LD6__LD6, + MX31_PIN_LD7__LD7, + MX31_PIN_LD8__LD8, + MX31_PIN_LD9__LD9, + MX31_PIN_LD10__LD10, + MX31_PIN_LD11__LD11, + MX31_PIN_LD12__LD12, + MX31_PIN_LD13__LD13, + MX31_PIN_LD14__LD14, + MX31_PIN_LD15__LD15, + MX31_PIN_LD16__LD16, + MX31_PIN_LD17__LD17, + MX31_PIN_VSYNC3__VSYNC3, + MX31_PIN_HSYNC__HSYNC, + MX31_PIN_FPSHIFT__FPSHIFT, + MX31_PIN_DRDY0__DRDY0, + MX31_PIN_D3_REV__D3_REV, + MX31_PIN_CONTRAST__CONTRAST, + MX31_PIN_D3_SPL__D3_SPL, + MX31_PIN_D3_CLS__D3_CLS, + MX31_PIN_LCS0__GPI03_23, +}; + static struct physmap_flash_data pcm037_flash_data = { .width = 2, }; @@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = { .flags = IORESOURCE_MEM, }; +static int usbotg_pins[] = { + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, +}; + +/* USB OTG HS port */ +static int __init gpio_usbotg_hs_activate(void) +{ + int ret = mxc_iomux_setup_multiple_pins(usbotg_pins, + ARRAY_SIZE(usbotg_pins), "usbotg"); + + if (ret < 0) { + printk(KERN_ERR "Cannot set up OTG pins\n"); + return ret; + } + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + + return 0; +} + +/* OTG config */ +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + static struct platform_device pcm037_flash = { .name = "physmap-flash", .id = 0, @@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { }; #ifdef CONFIG_I2C_IMX -static int i2c_1_pins[] = { - MX31_PIN_CSPI2_MOSI__SCL, - MX31_PIN_CSPI2_MISO__SDA, -}; - -static int pcm037_i2c_1_init(struct device *dev) -{ - return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins), - "i2c-1"); -} - -static void pcm037_i2c_1_exit(struct device *dev) -{ - mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins)); -} - static struct imxi2c_platform_data pcm037_i2c_1_data = { .bitrate = 100000, - .init = pcm037_i2c_1_init, - .exit = pcm037_i2c_1_exit, }; static struct at24_platform_data board_eeprom = { @@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = { }; #endif -static int sdhc1_pins[] = { - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, -}; +/* Not connected by default */ +#ifdef PCM970_SDHC_RW_SWITCH +static int pcm970_sdhc1_get_ro(struct device *dev) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6)); +} +#endif + +#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6) +#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6) -static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data) +static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) { - return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins), - "sdhc-1"); + int ret; + + ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect"); + if (ret) + return ret; + + gpio_direction_input(SDHC1_GPIO_DET); + +#ifdef PCM970_SDHC_RW_SWITCH + ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp"); + if (ret) + goto err_gpio_free; + gpio_direction_input(SDHC1_GPIO_WP); +#endif + + ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "sdhc-detect", data); + if (ret) + goto err_gpio_free_2; + + return 0; + +err_gpio_free_2: +#ifdef PCM970_SDHC_RW_SWITCH + gpio_free(SDHC1_GPIO_WP); +err_gpio_free: +#endif + gpio_free(SDHC1_GPIO_DET); + + return ret; } static void pcm970_sdhc1_exit(struct device *dev, void *data) { - mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins)); + free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data); + gpio_free(SDHC1_GPIO_DET); + gpio_free(SDHC1_GPIO_WP); } -/* No card and rw detection at the moment */ static struct imxmmc_platform_data sdhc_pdata = { +#ifdef PCM970_SDHC_RW_SWITCH + .get_ro = pcm970_sdhc1_get_ro, +#endif .init = pcm970_sdhc1_init, .exit = pcm970_sdhc1_exit, }; static struct platform_device *devices[] __initdata = { &pcm037_flash, - &pcm037_eth, &pcm037_sram_device, }; -static int uart0_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, }; -static int uart2_pins[] = { - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3 +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz Sharp */ + .name = "Sharp-LQ035Q7DH06-QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Sharp-LQ035Q7DH06-QVGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), }; /* @@ -215,21 +392,28 @@ static int uart2_pins[] = { */ static void __init mxc_board_init(void) { + int ret; + + mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), + "pcm037"); + platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); mxc_register_device(&mxc_uart_device2, &uart_pdata); - mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); /* LAN9217 IRQ pin */ - if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), - "pcm037-eth")) + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); + if (ret) + pr_warning("could not get LAN irq gpio\n"); + else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + platform_device_register(&pcm037_eth); + } + #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, @@ -239,6 +423,10 @@ static void __init mxc_board_init(void) #endif mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); + if (!gpio_usbotg_hs_activate()) + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } static void __init pcm037_timer_init(void) @@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &pcm037_timer, diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c new file mode 100644 index 000000000000..8d27c324abf2 --- /dev/null +++ b/arch/arm/mach-mx3/pcm043.c @@ -0,0 +1,252 @@ +/* + * Copyright (C) 2009 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/memory.h> +#include <linux/gpio.h> +#include <linux/smc911x.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE +#include <mach/i2c.h> +#endif +#include <mach/iomux-mx35.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> + +#include "devices.h" + +static const struct fb_videomode fb_modedb[] = { + { + /* 240x320 @ 60 Hz */ + .name = "Sharp-LQ035Q7", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "TX090", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 7, + .lower_margin = 40, + .hsync_len = 96, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "Sharp-LQ035Q7", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct physmap_flash_data pcm043_flash_data = { + .width = 2, +}; + +static struct resource pcm043_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm043_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm043_flash_data, + }, + .resource = &pcm043_flash_resource, + .num_resources = 1, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE +static struct imxi2c_platform_data pcm043_i2c_1_data = { + .bitrate = 50000, +}; + +static struct at24_platform_data board_eeprom = { + .byte_len = 4096, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info pcm043_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ + .platform_data = &board_eeprom, + }, { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563", + } +}; +#endif + +static struct platform_device *devices[] __initdata = { + &pcm043_flash, + &mxc_fec_device, +}; + +static struct pad_desc pcm043_pads[] = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* UART2 */ + MX35_PAD_CTS2__UART2_CTS, + MX35_PAD_RTS2__UART2_RTS, + MX35_PAD_TXD2__UART2_TXD_MUX, + MX35_PAD_RXD2__UART2_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* I2C1 */ + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_uart_device1, &uart_pdata); + +#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE + i2c_register_board_info(0, pcm043_i2c_devices, + ARRAY_SIZE(pcm043_i2c_devices)); + + mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data); +#endif + + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); +} + +static void __init pcm043_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer pcm043_timer = { + .init = pcm043_timer_init, +}; + +MACHINE_START(PCM043, "Phytec Phycore pcm043") + /* Maintainer: Pengutronix */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &pcm043_timer, +MACHINE_END + diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 5a01e48fd8f1..82b31c4ab11f 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mxc_map_io, + .map_io = mx31_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index 79df60c20e70..43da8bb4926b 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -168,7 +168,7 @@ void __init netx_init_irq(void) { int irq; - vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0); + vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0); for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { set_irq_chip(irq, &netx_hif_chip); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index cd8de89c5fad..55ecc01ea206 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -46,7 +46,6 @@ config MACH_OMAP_H2 config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX -# select GPIOEXPANDER_OMAP help TI OMAP 1710 H3 board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 1bda8f5d7546..6867cd3ad0b4 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management obj-$(CONFIG_PM) += pm.o sleep.o +# DSP +obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o +mailbox_mach-objs := mailbox.o + led-y := leds.o # Specific board support diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index d1ed1365319e..e70fc7c66bbb 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -33,8 +33,11 @@ #include <mach/common.h> #include <mach/dsp_common.h> #include <mach/omapfb.h> +#include <mach/hwa742.h> #include <mach/lcd_mipid.h> #include <mach/mmc.h> +#include <mach/usb.h> +#include <mach/clock.h> #define ADS7846_PENDOWN_GPIO 15 @@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { }, }; +static struct hwa742_platform_data nokia770_hwa742_platform_data = { + .te_connected = 1, +}; + +static void hwa742_dev_init(void) +{ + clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); + omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); +} /* assume no Mini-AB port */ @@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); omap_dsp_init(); + hwa742_dev_init(); ads7846_dev_init(); mipid_dev_init(); omap_usb_init(&nokia770_usb_config); diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 336e51dc6127..436eed22801b 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -776,7 +776,7 @@ int __init omap1_clk_init(void) arm_idlect1_mask = ~0; for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); cpu_mask = 0; if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 9774c1f5311e..5218943c91c0 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -53,11 +53,12 @@ #include <mach/clock.h> #include <mach/sram.h> #include <mach/tc.h> -#include <mach/pm.h> #include <mach/mux.h> #include <mach/dma.h> #include <mach/dmtimer.h> +#include "pm.h" + static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; @@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; * going idle we continue to do idle even if we get * a clock tick interrupt . . */ -void omap_pm_idle(void) +void omap1_pm_idle(void) { extern __u32 arm_idlect1_mask; __u32 use_idlect1 = arm_idlect1_mask; @@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void) #define EN_APICK 6 /* ARM_IDLECT2 */ #define DSP_EN 1 /* ARM_RSTCT1 */ -void omap_pm_suspend(void) +void omap1_pm_suspend(void) { unsigned long arg0 = 0, arg1 = 0; @@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: - omap_pm_suspend(); + omap1_pm_suspend(); break; default: return -EINVAL; @@ -683,7 +684,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap_pm_idle; + pm_idle = omap1_pm_idle; if (cpu_is_omap730()) setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h index ce6ee7927537..9ed5e2c1de4d 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -1,7 +1,7 @@ /* - * arch/arm/plat-omap/include/mach/pm.h + * arch/arm/mach-omap1/pm.h * - * Header file for OMAP Power Management Routines + * Header file for OMAP1 Power Management Routines * * Author: MontaVista Software, Inc. * support@mvista.com @@ -31,8 +31,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __ASM_ARCH_OMAP_PM_H -#define __ASM_ARCH_OMAP_PM_H +#ifndef __ARCH_ARM_MACH_OMAP1_PM_H +#define __ARCH_ARM_MACH_OMAP1_PM_H /* * ---------------------------------------------------------------------------- @@ -106,8 +106,7 @@ #if !defined(CONFIG_ARCH_OMAP730) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ - !defined(CONFIG_ARCH_OMAP16XX) && \ - !defined(CONFIG_ARCH_OMAP24XX) + !defined(CONFIG_ARCH_OMAP16XX) #warning "Power management for this processor not implemented yet" #endif @@ -115,29 +114,27 @@ #include <linux/clk.h> +extern struct kset power_subsys; + extern void prevent_idle_sleep(void); extern void allow_idle_sleep(void); -extern void omap_pm_idle(void); -extern void omap_pm_suspend(void); +extern void omap1_pm_idle(void); +extern void omap1_pm_suspend(void); + extern void omap730_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, - void __iomem *sdrc_power); extern void omap730_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern void omap24xx_idle_loop_suspend(void); extern unsigned int omap730_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap24xx_cpu_suspend_sz; extern unsigned int omap730_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; -extern unsigned int omap24xx_idle_loop_suspend_sz; #ifdef CONFIG_OMAP_SERIAL_WAKE extern void omap_serial_wake_trigger(int enable); @@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable); #define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x)) #define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] -#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x -#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] -#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] - /* * List of global OMAP registers to preserve. * More ones like CP and general purpose register values are preserved @@ -283,63 +276,5 @@ enum mpui1610_save_state { #endif }; -enum omap24xx_save_state { - OMAP24XX_SLEEP_SAVE_START = 0, - OMAP24XX_SLEEP_SAVE_INTC_MIR0, - OMAP24XX_SLEEP_SAVE_INTC_MIR1, - OMAP24XX_SLEEP_SAVE_INTC_MIR2, - - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM, - - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM, - - OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE, - OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_OE, - OMAP24XX_SLEEP_SAVE_GPIO4_OE, - OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT, - OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0, - OMAP24XX_SLEEP_SAVE_SIZE -}; - #endif /* ASSEMBLER */ #endif /* __ASM_ARCH_OMAP_PM_H */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 842090b148f1..f754cee4f3c3 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -26,9 +26,6 @@ #include <mach/mux.h> #include <mach/gpio.h> #include <mach/fpga.h> -#ifdef CONFIG_PM -#include <mach/pm.h> -#endif static struct clk * uart1_ck; static struct clk * uart2_ck; diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index f3eac932092d..22e8568339b0 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -35,7 +35,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <mach/pm.h> +#include "pm.h" .text diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 64ab386a65c7..a755eb5e2361 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -25,7 +25,7 @@ config ARCH_OMAP3430 select ARCH_OMAP_OTG comment "OMAP Board Type" - depends on ARCH_OMAP2 || ARCH_OMAP3 + depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 config MACH_OMAP_GENERIC bool "Generic OMAP board" @@ -56,6 +56,10 @@ config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_OMAP3EVM + bool "OMAP 3530 EVM board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX @@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_ZOOM2 + bool "OMAP3 Zoom2 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_4430SDP + bool "OMAP 4430 SDP board" + depends on ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index c49d9bfa3abd..735bae5b0dec 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,12 +3,21 @@ # # Common support -obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \ - devices.o serial.o gpmc.o timer-gp.o powerdomain.o \ - clockdomain.o +obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o + +omap-2-3-common = irq.o sdrc.o +prcm-common = prcm.o powerdomain.o +clock-common = clock.o clockdomain.o + +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +# SMP support ONLY available for OMAP4 +obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o + # Functions loaded to SRAM obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o @@ -20,14 +29,21 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # Power Management ifeq ($(CONFIG_PM),y) -obj-y += pm.o +obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o +obj-$(CONFIG_PM_DEBUG) += pm-debug.o endif # Clock framework obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +iommu-y += iommu2.o +iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o + +obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -40,6 +56,8 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \ mmc-twl4030.o +obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ @@ -48,8 +66,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-peripherals.o \ mmc-twl4030.o +obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ + mmc-twl4030.o \ + board-zoom-debugboard.o + +obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o # Platform specific device init code -ifeq ($(CONFIG_USB_MUSB_SOC),y) obj-y += usb-musb.o -endif + +onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o +obj-y += $(onenand-m) $(onenand-y) + +smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o +obj-y += $(smc91x-m) $(smc91x-y) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 22143651037e..9c3fdcdf76c3 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -36,14 +36,12 @@ #include <mach/common.h> #include <mach/gpmc.h> #include <mach/usb.h> +#include <mach/gpmc-smc91x.h> #include "mmc-twl4030.h" #define SDP2430_CS0_BASE 0x04000000 -#define SDP2430_FLASH_CS 0 -#define SDP2430_SMC91X_CS 5 - -#define SDP2430_ETHR_GPIO_IRQ 149 +#define SECONDARY_LCD_GPIO 147 static struct mtd_partition sdp2430_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = { .resource = &sdp2430_flash_resource, }; -static struct resource sdp2430_smc91x_resources[] = { - [0] = { - .start = SDP2430_CS0_BASE, - .end = SDP2430_CS0_BASE + SZ_64M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device sdp2430_smc91x_device = { - .name = "smc91x", +static struct platform_device sdp2430_lcd_device = { + .name = "sdp2430_lcd", .id = -1, - .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources), - .resource = sdp2430_smc91x_resources, }; static struct platform_device *sdp2430_devices[] __initdata = { - &sdp2430_smc91x_device, &sdp2430_flash_device, + &sdp2430_lcd_device, }; -static inline void __init sdp2430_init_smc91x(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int rate; - struct clk *gpmc_fck; +static struct omap_lcd_config sdp2430_lcd_config __initdata = { + .ctrl_name = "internal", +}; - eth_cs = SDP2430_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 5, + .gpio_irq = 149, + .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | + IORESOURCE_IRQ_LOWLEVEL, - clk_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - - /* Make sure CS1 timings are correct, for 2430 always muxed */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else { /* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } +}; - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } +static void __init board_smc91x_init(void) +{ + if (omap_rev() > OMAP3430_REV_ES1_0) + board_smc91x_data.gpio_irq = 6; + else + board_smc91x_data.gpio_irq = 29; - sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300; - sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f; - udelay(100); + gpmc_smc91x_init(&board_smc91x_data); +} - if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - SDP2430_ETHR_GPIO_IRQ); - gpmc_cs_free(eth_cs); - goto out; - } - gpio_direction_input(SDP2430_ETHR_GPIO_IRQ); +#else -out: - clk_disable(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init omap_2430sdp_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); - sdp2430_init_smc91x(); } static struct omap_uart_config sdp2430_uart_config __initdata = { @@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = { static struct omap_board_config_kernel sdp2430_config[] = { {OMAP_TAG_UART, &sdp2430_uart_config}, + {OMAP_TAG_LCD, &sdp2430_lcd_config}, }; @@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static void __init omap_2430sdp_init(void) { + int ret; + omap2430_i2c_init(); platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); @@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void) omap_serial_init(); twl4030_mmc_init(mmc); usb_musb_init(); + board_smc91x_init(); + + /* Turn off secondary LCD backlight */ + ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight"); + if (ret == 0) + gpio_direction_output(SECONDARY_LCD_GPIO, 0); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ed9274972122..496a90e4ea7a 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -39,15 +39,13 @@ #include <mach/control.h> #include <mach/keypad.h> +#include <mach/gpmc-smc91x.h> +#include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" #define CONFIG_DISABLE_HFCLK 1 -#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29 -#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6 -#define SDP3430_SMC91X_CS 3 - #define SDP3430_TS_GPIO_IRQ_SDPV1 3 #define SDP3430_TS_GPIO_IRQ_SDPV2 2 @@ -56,24 +54,6 @@ #define TWL4030_MSECURE_GPIO 22 -static struct resource sdp3430_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device sdp3430_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources), - .resource = sdp3430_smc91x_resources, -}; - static int sdp3430_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = { }; static struct platform_device *sdp3430_devices[] __initdata = { - &sdp3430_smc91x_device, &sdp3430_lcd_device, }; -static inline void __init sdp3430_init_smc91x(void) -{ - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = SDP3430_SMC91X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300; - sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f; - udelay(100); - - if (omap_rev() > OMAP3430_REV_ES1_0) - eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2; - else - eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1; - - sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio); - - if (gpio_request(eth_gpio, "SMC91x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); -} - static void __init omap_3430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(hyb18m512160af6_sdrc_params); omap_init_irq(); omap_gpio_init(); - sdp3430_init_smc91x(); } static struct omap_uart_config sdp3430_uart_config __initdata = { @@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void) return 0; } +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 3, + .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | + IORESOURCE_IRQ_LOWLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + if (omap_rev() > OMAP3430_REV_ES1_0) + board_smc91x_data.gpio_irq = 6; + else + board_smc91x_data.gpio_irq = 29; + + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif + static void __init omap_3430sdp_init(void) { omap3430_i2c_init(); @@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void) ads7846_dev_init(); omap_serial_init(); usb_musb_init(); + board_smc91x_init(); } static void __init omap_3430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c new file mode 100644 index 000000000000..57e477bd89c6 --- /dev/null +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -0,0 +1,94 @@ +/* + * Board support file for OMAP4430 SDP. + * + * Copyright (C) 2009 Texas Instruments + * + * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Based on mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/board.h> +#include <mach/common.h> +#include <mach/control.h> +#include <mach/timer-gp.h> +#include <asm/hardware/gic.h> + +static struct platform_device sdp4430_lcd_device = { + .name = "sdp4430_lcd", + .id = -1, +}; + +static struct platform_device *sdp4430_devices[] __initdata = { + &sdp4430_lcd_device, +}; + +static struct omap_uart_config sdp4430_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2), +}; + +static struct omap_lcd_config sdp4430_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel sdp4430_config[] __initdata = { + { OMAP_TAG_UART, &sdp4430_uart_config }, + { OMAP_TAG_LCD, &sdp4430_lcd_config }, +}; + +static void __init gic_init_irq(void) +{ + gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); + gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); +} + +static void __init omap_4430sdp_init_irq(void) +{ + omap2_init_common_hw(NULL); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(1); +#endif + gic_init_irq(); + omap_gpio_init(); +} + + +static void __init omap_4430sdp_init(void) +{ + platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); + omap_serial_init(); +} + +static void __init omap_4430sdp_map_io(void) +{ + omap2_set_globals_443x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") + /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_4430sdp_map_io, + .init_irq = omap_4430sdp_init_irq, + .init_machine = omap_4430sdp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index da57b0fcda14..d8bc0a7dcb8d 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -16,11 +16,13 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/regulator/machine.h> #include <linux/i2c/twl4030.h> #include <linux/io.h> #include <linux/smsc911x.h> @@ -39,6 +41,7 @@ #include <asm/delay.h> #include <mach/control.h> #include <mach/usb.h> +#include <mach/keypad.h> #include "mmc-twl4030.h" @@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = { }, }; -static struct platform_device *ldp_devices[] __initdata = { - &ldp_smsc911x_device, +static int ldp_twl4030_keymap[] = { + KEY(0, 0, KEY_1), + KEY(1, 0, KEY_2), + KEY(2, 0, KEY_3), + KEY(0, 1, KEY_4), + KEY(1, 1, KEY_5), + KEY(2, 1, KEY_6), + KEY(3, 1, KEY_F5), + KEY(0, 2, KEY_7), + KEY(1, 2, KEY_8), + KEY(2, 2, KEY_9), + KEY(3, 2, KEY_F6), + KEY(0, 3, KEY_F7), + KEY(1, 3, KEY_0), + KEY(2, 3, KEY_F8), + PERSISTENT_KEY(4, 5), + KEY(4, 4, KEY_VOLUMEUP), + KEY(5, 5, KEY_VOLUMEDOWN), + 0 +}; + +static struct twl4030_keypad_data ldp_kp_twl4030_data = { + .rows = 6, + .cols = 6, + .keymap = ldp_twl4030_keymap, + .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap), + .rep = 1, +}; + +static struct gpio_keys_button ldp_gpio_keys_buttons[] = { + [0] = { + .code = KEY_ENTER, + .gpio = 101, + .desc = "enter sw", + .active_low = 1, + .debounce_interval = 30, + }, + [1] = { + .code = KEY_F1, + .gpio = 102, + .desc = "func 1", + .active_low = 1, + .debounce_interval = 30, + }, + [2] = { + .code = KEY_F2, + .gpio = 103, + .desc = "func 2", + .active_low = 1, + .debounce_interval = 30, + }, + [3] = { + .code = KEY_F3, + .gpio = 104, + .desc = "func 3", + .active_low = 1, + .debounce_interval = 30, + }, + [4] = { + .code = KEY_F4, + .gpio = 105, + .desc = "func 4", + .active_low = 1, + .debounce_interval = 30, + }, + [5] = { + .code = KEY_LEFT, + .gpio = 106, + .desc = "left sw", + .active_low = 1, + .debounce_interval = 30, + }, + [6] = { + .code = KEY_RIGHT, + .gpio = 107, + .desc = "right sw", + .active_low = 1, + .debounce_interval = 30, + }, + [7] = { + .code = KEY_UP, + .gpio = 108, + .desc = "up sw", + .active_low = 1, + .debounce_interval = 30, + }, + [8] = { + .code = KEY_DOWN, + .gpio = 109, + .desc = "down sw", + .active_low = 1, + .debounce_interval = 30, + }, +}; + +static struct gpio_keys_platform_data ldp_gpio_keys = { + .buttons = ldp_gpio_keys_buttons, + .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons), + .rep = 1, +}; + +static struct platform_device ldp_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &ldp_gpio_keys, + }, +}; + +static int ts_gpio; + +/** + * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq + * + * @return - void. If request gpio fails then Flag KERN_ERR. + */ +static void ads7846_dev_init(void) +{ + if (gpio_request(ts_gpio, "ads7846 irq") < 0) { + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + return; + } + + gpio_direction_input(ts_gpio); + omap_set_gpio_debounce(ts_gpio, 1); + omap_set_gpio_debounce_time(ts_gpio, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(ts_gpio); +} + +static struct ads7846_platform_data tsc2046_config __initdata = { + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config tsc2046_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info ldp_spi_board_info[] __initdata = { + [0] = { + /* + * TSC2046 operates at a max freqency of 2MHz, so + * operate slightly below at 1.5MHz + */ + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &tsc2046_mcspi_config, + .irq = 0, + .platform_data = &tsc2046_config, + }, }; static inline void __init ldp_init_smsc911x(void) @@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct platform_device ldp_lcd_device = { + .name = "ldp_lcd", + .id = -1, +}; + +static struct omap_lcd_config ldp_lcd_config __initdata = { + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel ldp_config[] __initdata = { { OMAP_TAG_UART, &ldp_uart_config }, + { OMAP_TAG_LCD, &ldp_lcd_config }, +}; + +static struct twl4030_usb_data ldp_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, }; static struct twl4030_gpio_platform_data ldp_gpio_data = { @@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = { .irq_end = TWL4030_GPIO_IRQ_END, }; +static struct twl4030_madc_platform_data ldp_madc_data = { + .irq_line = 1, +}; + +static struct regulator_consumer_supply ldp_vmmc1_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data ldp_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ldp_vmmc1_supply, +}; + static struct twl4030_platform_data ldp_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ + .madc = &ldp_madc_data, + .usb = &ldp_usb_data, + .vmmc1 = &ldp_vmmc1, .gpio = &ldp_gpio_data, + .keypad = &ldp_kp_twl4030_data, }; static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = { @@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; +static struct platform_device *ldp_devices[] __initdata = { + &ldp_smsc911x_device, + &ldp_lcd_device, + &ldp_gpio_keys_device, +}; + static void __init omap_ldp_init(void) { omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); omap_board_config = ldp_config; omap_board_config_size = ARRAY_SIZE(ldp_config); + ts_gpio = 54; + ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio); + spi_register_board_info(ldp_spi_board_info, + ARRAY_SIZE(ldp_spi_board_info)); + ads7846_dev_init(); omap_serial_init(); - twl4030_mmc_init(mmc); usb_musb_init(); + + twl4030_mmc_init(mmc); + /* link regulators to MMC adapters */ + ldp_vmmc1_supply.dev = mmc[0].dev; } static void __init omap_ldp_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 3a7a29d1f9a7..991ac9c38032 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/regulator/machine.h> #include <linux/i2c/twl4030.h> #include <mach/hardware.h> @@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = { .resource = &omap3beagle_nand_resource, }; +#include "sdram-micron-mt46h32m32lf-6.h" + static struct omap_uart_config omap3_beagle_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct platform_device omap3_beagle_lcd_device = { + .name = "omap3beagle_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct regulator_consumer_supply beagle_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply beagle_vsim_supply = { + .supply = "vmmc_aux", +}; + static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, @@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); + /* link regulators to MMC adapters */ + beagle_vmmc1_supply.dev = mmc[0].dev; + beagle_vsim_supply.dev = mmc[0].dev; + /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ @@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = { .setup = beagle_twl_gpio_setup, }; +static struct regulator_consumer_supply beagle_vdac_supply = { + .supply = "vdac", + .dev = &omap3_beagle_lcd_device.dev, +}; + +static struct regulator_consumer_supply beagle_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_beagle_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data beagle_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data beagle_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data beagle_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data beagle_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &beagle_vdvi_supply, +}; + static struct twl4030_platform_data beagle_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ .gpio = &beagle_gpio_data, + .vmmc1 = &beagle_vmmc1, + .vsim = &beagle_vsim, + .vdac = &beagle_vdac, + .vpll2 = &beagle_vpll2, }; static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { @@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void) omap_gpio_init(); } -static struct platform_device omap3_beagle_lcd_device = { - .name = "omap3beagle_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { - .ctrl_name = "internal", -}; - static struct gpio_led gpio_leds[] = { { .name = "beagleboard::usr0", diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c new file mode 100644 index 000000000000..d3cc145814d0 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -0,0 +1,329 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3evm.c + * + * Copyright (C) 2008 Texas Instruments + * + * Modified from mach-omap2/board-3430sdp.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/leds.h> + +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/board.h> +#include <mach/mux.h> +#include <mach/usb.h> +#include <mach/common.h> +#include <mach/mcspi.h> +#include <mach/keypad.h> + +#include "sdram-micron-mt46h32m32lf-6.h" +#include "mmc-twl4030.h" + +#define OMAP3_EVM_TS_GPIO 175 + +#define OMAP3EVM_ETHR_START 0x2c000000 +#define OMAP3EVM_ETHR_SIZE 1024 +#define OMAP3EVM_ETHR_GPIO_IRQ 176 +#define OMAP3EVM_SMC911X_CS 5 + +static struct resource omap3evm_smc911x_resources[] = { + [0] = { + .start = OMAP3EVM_ETHR_START, + .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap3evm_smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources), + .resource = &omap3evm_smc911x_resources[0], +}; + +static inline void __init omap3evm_init_smc911x(void) +{ + int eth_cs; + struct clk *l3ck; + unsigned int rate; + + eth_cs = OMAP3EVM_SMC911X_CS; + + l3ck = clk_get(NULL, "l3_ck"); + if (IS_ERR(l3ck)) + rate = 100000000; + else + rate = clk_get_rate(l3ck); + + if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + OMAP3EVM_ETHR_GPIO_IRQ); + return; + } + + gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); +} + +static struct omap_uart_config omap3_evm_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = 63, + }, + {} /* Terminator */ +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "omap3evm::ledb", + /* normally not visible (board underside) */ + .default_trigger = "default-on", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + + +static int omap3evm_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(L8_34XX_GPIO63); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* + * Most GPIOs are for USB OTG. Some are mostly sent to + * the P2 connector; notably LEDA for the LCD backlight. + */ + + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + platform_device_register(&leds_gpio); + + return 0; +} + +static struct twl4030_gpio_platform_data omap3evm_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .setup = omap3evm_twl_gpio_setup, +}; + +static struct twl4030_usb_data omap3evm_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static int omap3evm_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P) +}; + +static struct twl4030_keypad_data omap3evm_kp_data = { + .rows = 4, + .cols = 4, + .keymap = omap3evm_keymap, + .keymapsize = ARRAY_SIZE(omap3evm_keymap), + .rep = 1, +}; + +static struct twl4030_madc_platform_data omap3evm_madc_data = { + .irq_line = 1, +}; + +static struct twl4030_platform_data omap3evm_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .keypad = &omap3evm_kp_data, + .madc = &omap3evm_madc_data, + .usb = &omap3evm_usb_data, + .gpio = &omap3evm_gpio_data, +}; + +static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &omap3evm_twldata, + }, +}; + +static int __init omap3_evm_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo, + ARRAY_SIZE(omap3evm_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static struct platform_device omap3_evm_lcd_device = { + .name = "omap3evm_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_evm_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static void ads7846_dev_init(void) +{ + if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0) + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); + + gpio_direction_input(OMAP3_EVM_TS_GPIO); + + omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(OMAP3_EVM_TS_GPIO); +} + +struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, + .settle_delay_usecs = 150, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +struct spi_board_info omap3evm_spi_board_info[] = { + [0] = { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO), + .platform_data = &ads7846_config, + }, +}; + +static void __init omap3_evm_init_irq(void) +{ + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap_init_irq(); + omap_gpio_init(); + omap3evm_init_smc911x(); +} + +static struct omap_board_config_kernel omap3_evm_config[] __initdata = { + { OMAP_TAG_UART, &omap3_evm_uart_config }, + { OMAP_TAG_LCD, &omap3_evm_lcd_config }, +}; + +static struct platform_device *omap3_evm_devices[] __initdata = { + &omap3_evm_lcd_device, + &omap3evm_smc911x_device, +}; + +static void __init omap3_evm_init(void) +{ + omap3_evm_i2c_init(); + + platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); + omap_board_config = omap3_evm_config; + omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + + spi_register_board_info(omap3evm_spi_board_info, + ARRAY_SIZE(omap3evm_spi_board_info)); + + omap_serial_init(); + usb_musb_init(); + ads7846_dev_init(); +} + +static void __init omap3_evm_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP3EVM, "OMAP3 EVM") + /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_evm_map_io, + .init_irq = omap3_evm_init_irq, + .init_machine = omap3_evm_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 402f09c6cf10..e32aa23ce962 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -23,7 +23,11 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/regulator/machine.h> #include <linux/i2c/twl4030.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -35,11 +39,154 @@ #include <mach/hardware.h> #include <mach/mcspi.h> #include <mach/usb.h> +#include <mach/keypad.h> +#include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" #define OMAP3_PANDORA_TS_GPIO 94 +/* hardware debounce: (value + 1) * 31us */ +#define GPIO_DEBOUNCE_TIME 127 + +static struct gpio_led pandora_gpio_leds[] = { + { + .name = "pandora::sd1", + .default_trigger = "mmc0", + .gpio = 128, + }, { + .name = "pandora::sd2", + .default_trigger = "mmc1", + .gpio = 129, + }, { + .name = "pandora::bluetooth", + .gpio = 158, + }, { + .name = "pandora::wifi", + .gpio = 159, + }, +}; + +static struct gpio_led_platform_data pandora_gpio_led_data = { + .leds = pandora_gpio_leds, + .num_leds = ARRAY_SIZE(pandora_gpio_leds), +}; + +static struct platform_device pandora_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &pandora_gpio_led_data, + }, +}; + +#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ +{ \ + .gpio = gpio_num, \ + .type = ev_type, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ +} + +#define GPIO_BUTTON_LOW(gpio_num, event_code, description) \ + GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description) + +static struct gpio_keys_button pandora_gpio_keys[] = { + GPIO_BUTTON_LOW(110, KEY_UP, "up"), + GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), + GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), + GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), + GPIO_BUTTON_LOW(111, BTN_A, "a"), + GPIO_BUTTON_LOW(106, BTN_B, "b"), + GPIO_BUTTON_LOW(109, BTN_X, "x"), + GPIO_BUTTON_LOW(101, BTN_Y, "y"), + GPIO_BUTTON_LOW(102, BTN_TL, "l"), + GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), + GPIO_BUTTON_LOW(105, BTN_TR, "r"), + GPIO_BUTTON_LOW(107, BTN_TR2, "r2"), + GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"), + GPIO_BUTTON_LOW(99, KEY_MENU, "menu"), + GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"), + GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"), + GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"), +}; + +static struct gpio_keys_platform_data pandora_gpio_key_info = { + .buttons = pandora_gpio_keys, + .nbuttons = ARRAY_SIZE(pandora_gpio_keys), +}; + +static struct platform_device pandora_keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &pandora_gpio_key_info, + }, +}; + +static void __init pandora_keys_gpio_init(void) +{ + /* set debounce time for GPIO banks 4 and 6 */ + omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME); + omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); +} + +static int pandora_keypad_map[] = { + /* col, row, code */ + KEY(0, 0, KEY_9), + KEY(0, 1, KEY_0), + KEY(0, 2, KEY_BACKSPACE), + KEY(0, 3, KEY_O), + KEY(0, 4, KEY_P), + KEY(0, 5, KEY_K), + KEY(0, 6, KEY_L), + KEY(0, 7, KEY_ENTER), + KEY(1, 0, KEY_8), + KEY(1, 1, KEY_7), + KEY(1, 2, KEY_6), + KEY(1, 3, KEY_5), + KEY(1, 4, KEY_4), + KEY(1, 5, KEY_3), + KEY(1, 6, KEY_2), + KEY(1, 7, KEY_1), + KEY(2, 0, KEY_I), + KEY(2, 1, KEY_U), + KEY(2, 2, KEY_Y), + KEY(2, 3, KEY_T), + KEY(2, 4, KEY_R), + KEY(2, 5, KEY_E), + KEY(2, 6, KEY_W), + KEY(2, 7, KEY_Q), + KEY(3, 0, KEY_J), + KEY(3, 1, KEY_H), + KEY(3, 2, KEY_G), + KEY(3, 3, KEY_F), + KEY(3, 4, KEY_D), + KEY(3, 5, KEY_S), + KEY(3, 6, KEY_A), + KEY(3, 7, KEY_LEFTSHIFT), + KEY(4, 0, KEY_N), + KEY(4, 1, KEY_B), + KEY(4, 2, KEY_V), + KEY(4, 3, KEY_C), + KEY(4, 4, KEY_X), + KEY(4, 5, KEY_Z), + KEY(4, 6, KEY_DOT), + KEY(4, 7, KEY_COMMA), + KEY(5, 0, KEY_M), + KEY(5, 1, KEY_SPACE), + KEY(5, 2, KEY_FN), +}; + +static struct twl4030_keypad_data pandora_kp_data = { + .rows = 8, + .cols = 6, + .keymap = pandora_keypad_map, + .keymapsize = ARRAY_SIZE(pandora_keypad_map), + .rep = 1, +}; + static struct twl4030_hsmmc_info omap3pandora_mmc[] = { { .mmc = 1, @@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = { .enabled_uarts = (1 << 2), /* UART3 */ }; +static struct regulator_consumer_supply pandora_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply pandora_vmmc2_supply = { + .supply = "vmmc", +}; + static int omap3pandora_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, omap3pandora_mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(omap3pandora_mmc); + /* link regulators to MMC adapters */ + pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev; + pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev; + return 0; } @@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { .setup = omap3pandora_twl_gpio_setup, }; +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data pandora_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vmmc1_supply, +}; + +/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ +static struct regulator_init_data pandora_vmmc2 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vmmc2_supply, +}; + static struct twl4030_usb_data omap3pandora_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = { .irq_end = TWL4030_IRQ_END, .gpio = &omap3pandora_gpio_data, .usb = &omap3pandora_usb_data, + .vmmc1 = &pandora_vmmc1, + .vmmc2 = &pandora_vmmc2, + .keypad = &pandora_kp_data, }; static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { @@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = { static struct platform_device *omap3pandora_devices[] __initdata = { &omap3pandora_lcd_device, + &pandora_leds_gpio, + &pandora_keys_gpio, }; static void __init omap3pandora_init(void) @@ -201,6 +395,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); + pandora_keys_gpio_init(); usb_musb_init(); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b1f23bea863f..dff5528fbfb5 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -27,6 +27,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c/twl4030.h> +#include <linux/regulator/machine.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -45,6 +46,7 @@ #include <mach/nand.h> #include <mach/usb.h> +#include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" #define OVERO_GPIO_BT_XGATE 15 @@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + { + .mmc = 2, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .transceiver = true, + .ocr_mask = 0x00100000, /* 3.3V */ + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply overo_vmmc1_supply = { + .supply = "vmmc", +}; + +static int overo_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + twl4030_mmc_init(mmc); + + overo_vmmc1_supply.dev = mmc[0].dev; + + return 0; +} + static struct twl4030_gpio_platform_data overo_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, + .setup = overo_twl_gpio_setup, +}; + +static struct twl4030_usb_data overo_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct regulator_init_data overo_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vmmc1_supply, }; +/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ + static struct twl4030_platform_data overo_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, .gpio = &overo_gpio_data, + .usb = &overo_usb_data, + .vmmc1 = &overo_vmmc1, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { { - I2C_BOARD_INFO("twl4030", 0x48), + I2C_BOARD_INFO("tps65950", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, .platform_data = &overo_twldata, @@ -303,7 +360,7 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; -static struct twl4030_hsmmc_info mmc[] __initdata = { - { - .mmc = 1, - .wires = 4, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { - .mmc = 2, - .wires = 4, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .transceiver = true, - }, - {} /* Terminator */ -}; - static void __init overo_init(void) { overo_i2c_init(); @@ -350,7 +390,6 @@ static void __init overo_init(void) omap_board_config = overo_config; omap_board_config_size = ARRAY_SIZE(overo_config); omap_serial_init(); - twl4030_mmc_init(mmc); overo_flash_init(); usb_musb_init(); overo_ads7846_init(); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index a7381729645c..da93b86234ed 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -27,30 +27,13 @@ #include <mach/dma.h> #include <mach/gpmc.h> #include <mach/keypad.h> +#include <mach/onenand.h> +#include <mach/gpmc-smc91x.h> #include "mmc-twl4030.h" - -#define SMC91X_CS 1 -#define SMC91X_GPIO_IRQ 54 -#define SMC91X_GPIO_RESET 164 -#define SMC91X_GPIO_PWRDWN 86 - -static struct resource rx51_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device rx51_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(rx51_smc91x_resources), - .resource = rx51_smc91x_resources, -}; +#define SYSTEM_REV_B_USES_VAUX3 0x1699 +#define SYSTEM_REV_S_USES_VAUX3 0x8 static int rx51_keymap[] = { KEY(0, 0, KEY_Q), @@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = { .rep = 1, }; -static struct platform_device *rx51_peripherals_devices[] = { - &rx51_smc91x_device, -}; - -/* - * Timings are taken from smsc-lan91c96-ms.pdf - */ -static int smc91x_init_gpmc(int cs) -{ - struct gpmc_timings t; - const int t2_r = 45; /* t2 in Figure 12.10 */ - const int t2_w = 30; /* t2 in Figure 12.11 */ - const int t3 = 15; /* t3 in Figure 12.10 */ - const int t5_r = 0; /* t5 in Figure 12.10 */ - const int t6_r = 45; /* t6 in Figure 12.10 */ - const int t6_w = 0; /* t6 in Figure 12.11 */ - const int t7_w = 15; /* t7 in Figure 12.11 */ - const int t15 = 12; /* t15 in Figure 12.2 */ - const int t20 = 185; /* t20 in Figure 12.2 */ - - memset(&t, 0, sizeof(t)); - - t.cs_on = t15; - t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */ - t.adv_on = t3; /* Figure 12.10 */ - t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */ - t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */ - t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */ - t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */ - t.we_on = t.we_off - t7_w; /* Figure 12.11 */ - t.rd_cycle = t20; /* Figure 12.2 */ - t.wr_cycle = t20; /* Figure 12.4 */ - t.access = t3 + t2_r + t5_r; /* Figure 12.10 */ - t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */ - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16); - - return gpmc_cs_set_timings(cs, &t); -} - -static void __init rx51_init_smc91x(void) -{ - unsigned long cs_mem_base; - int ret; - - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); - - if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - rx51_smc91x_resources[0].start = cs_mem_base + 0x300; - rx51_smc91x_resources[0].end = cs_mem_base + 0x30f; - - smc91x_init_gpmc(SMC91X_CS); - - if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0) - goto free1; - - gpio_direction_input(SMC91X_GPIO_IRQ); - rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ); - - ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown"); - if (ret) - goto free2; - gpio_direction_output(SMC91X_GPIO_PWRDWN, 0); - - ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset"); - if (ret) - goto free3; - gpio_direction_output(SMC91X_GPIO_RESET, 0); - gpio_set_value(SMC91X_GPIO_RESET, 1); - msleep(100); - gpio_set_value(SMC91X_GPIO_RESET, 0); - - return; - -free3: - gpio_free(SMC91X_GPIO_PWRDWN); -free2: - gpio_free(SMC91X_GPIO_IRQ); -free1: - gpmc_cs_free(SMC91X_CS); - - printk(KERN_ERR "Could not initialize smc91x\n"); -} - static struct twl4030_madc_platform_data rx51_madc_data = { .irq_line = 1, }; @@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = { }; /* VAUX3 - adds more power to VIO_18 rail */ -static struct regulator_init_data rx51_vaux3 = { +static struct regulator_init_data rx51_vaux3_cam = { .constraints = { .name = "VCAM_DIG_18", .min_uV = 1800000, @@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = { }, }; +static struct regulator_init_data rx51_vaux3_mmc = { + .constraints = { + .name = "VMMC2_30", + .min_uV = 2800000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &rx51_vmmc2_supply, +}; + static struct regulator_init_data rx51_vaux4 = { .constraints = { .name = "VCAM_ANA_28", @@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = { .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, - .vaux3 = &rx51_vaux3, .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, - .vmmc2 = &rx51_vmmc2, .vsim = &rx51_vsim, .vdac = &rx51_vdac, }; @@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { static int __init rx51_i2c_init(void) { + if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || + system_rev >= SYSTEM_REV_B_USES_VAUX3) + rx51_twldata.vaux3 = &rx51_vaux3_mmc; + else { + rx51_twldata.vaux3 = &rx51_vaux3_cam; + rx51_twldata.vmmc2 = &rx51_vmmc2; + } omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1, ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); omap_register_i2c_bus(2, 100, NULL, 0); @@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void) return 0; } +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +static struct mtd_partition onenand_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x20000, + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 0x60000, + }, + { + .name = "log", + .offset = MTDPART_OFS_APPEND, + .size = 0x40000, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "initfs", + .offset = MTDPART_OFS_APPEND, + .size = 0x200000, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_onenand_platform_data board_onenand_data = { + .cs = 0, + .gpio_irq = 65, + .parts = onenand_partitions, + .nr_parts = ARRAY_SIZE(onenand_partitions), +}; + +static void __init board_onenand_init(void) +{ + gpmc_onenand_init(&board_onenand_data); +} + +#else + +static inline void board_onenand_init(void) +{ +} + +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 54, + .gpio_pwrdwn = 86, + .gpio_reset = 164, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + omap_cfg_reg(U8_34XX_GPIO54_DOWN); + omap_cfg_reg(G25_34XX_GPIO86_OUT); + omap_cfg_reg(H19_34XX_GPIO164_OUT); + + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif void __init rx51_peripherals_init(void) { - platform_add_devices(rx51_peripherals_devices, - ARRAY_SIZE(rx51_peripherals_devices)); rx51_i2c_init(); - rx51_init_smc91x(); + board_onenand_init(); + board_smc91x_init(); } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c new file mode 100644 index 000000000000..bac5c4321ff7 --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * Mikkel Christensen <mlc@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/serial_8250.h> +#include <linux/smsc911x.h> + +#include <mach/gpmc.h> + +#define ZOOM2_SMSC911X_CS 7 +#define ZOOM2_SMSC911X_GPIO 158 +#define ZOOM2_QUADUART_CS 3 +#define ZOOM2_QUADUART_GPIO 102 +#define QUART_CLK 1843200 +#define DEBUG_BASE 0x08000000 +#define ZOOM2_ETHR_START DEBUG_BASE + +static struct resource zoom2_smsc911x_resources[] = { + [0] = { + .start = ZOOM2_ETHR_START, + .end = ZOOM2_ETHR_START + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config zoom2_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device zoom2_smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources), + .resource = zoom2_smsc911x_resources, + .dev = { + .platform_data = &zoom2_smsc911x_config, + }, +}; + +static inline void __init zoom2_init_smsc911x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = ZOOM2_SMSC911X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + return; + } + + zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0; + zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff; + + eth_gpio = ZOOM2_SMSC911X_GPIO; + + zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + + if (gpio_request(eth_gpio, "smsc911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", + eth_gpio); + return; + } + gpio_direction_input(eth_gpio); +} + +static struct plat_serial8250_port serial_platform_data[] = { + { + .mapbase = 0x10000000, + .irq = OMAP_GPIO_IRQ(102), + .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = QUART_CLK, + }, { + .flags = 0 + } +}; + +static struct platform_device zoom2_debugboard_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static inline void __init zoom2_init_quaduart(void) +{ + int quart_cs; + unsigned long cs_mem_base; + int quart_gpio = 0; + + quart_cs = ZOOM2_QUADUART_CS; + + if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem" + "for Quad UART(TL16CP754C)\n"); + return; + } + + quart_gpio = ZOOM2_QUADUART_GPIO; + + if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", + quart_gpio); + return; + } + gpio_direction_input(quart_gpio); +} + +static inline int omap_zoom2_debugboard_detect(void) +{ + int debug_board_detect = 0; + + debug_board_detect = ZOOM2_SMSC911X_GPIO; + + if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug" + "board detect\n", debug_board_detect); + return 0; + } + gpio_direction_input(debug_board_detect); + + if (!gpio_get_value(debug_board_detect)) { + gpio_free(debug_board_detect); + return 0; + } + return 1; +} + +static struct platform_device *zoom2_devices[] __initdata = { + &zoom2_smsc911x_device, + &zoom2_debugboard_serial_device, +}; + +int __init omap_zoom2_debugboard_init(void) +{ + if (!omap_zoom2_debugboard_detect()) + return 0; + + zoom2_init_smsc911x(); + zoom2_init_quaduart(); + return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices)); +} diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c new file mode 100644 index 000000000000..bcc0f7632dea --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * Mikkel Christensen <mlc@ti.com> + * + * Modified from mach-omap2/board-ldp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/i2c/twl4030.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/common.h> +#include <mach/usb.h> + +#include "mmc-twl4030.h" + +static void __init omap_zoom2_init_irq(void) +{ + omap2_init_common_hw(NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_uart_config zoom2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel zoom2_config[] __initdata = { + { OMAP_TAG_UART, &zoom2_uart_config }, +}; + +static struct twl4030_gpio_platform_data zoom2_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, +}; + +static struct twl4030_platform_data zoom2_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .gpio = &zoom2_gpio_data, +}; + +static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &zoom2_twldata, + }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, + ARRAY_SIZE(zoom2_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static struct twl4030_hsmmc_info mmc[] __initdata = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +extern int __init omap_zoom2_debugboard_init(void); + +static void __init omap_zoom2_init(void) +{ + omap_i2c_init(); + omap_board_config = zoom2_config; + omap_board_config_size = ARRAY_SIZE(zoom2_config); + omap_serial_init(); + omap_zoom2_debugboard_init(); + twl4030_mmc_init(mmc); + usb_musb_init(); +} + +static void __init omap_zoom2_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_zoom2_map_io, + .init_irq = omap_zoom2_init_irq, + .init_machine = omap_zoom2_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 4247a1534411..ba528f85749c 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk) return; prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD, - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); + OMAP2_PRCM_CLKCFG_CTRL_OFFSET); /* OCP barrier */ - prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); + prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET); } /* @@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, const struct clksel_rate *clkr; u32 last_div = 0; - printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n", - clk->name, target_rate); + pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", + clk->name, target_rate); *new_div = 1; @@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, /* Sanity check */ if (clkr->div <= last_div) - printk(KERN_ERR "clock: clksel_rate table not sorted " + pr_err("clock: clksel_rate table not sorted " "for clock %s", clk->name); last_div = clkr->div; @@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, } if (!clkr->div) { - printk(KERN_ERR "clock: Could not find divisor for target " + pr_err("clock: Could not find divisor for target " "rate %ld for clock %s parent %s\n", target_rate, clk->name, clk->parent->name); return ~0; @@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, *new_div = clkr->div; - printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div, - (clk->parent->rate / clkr->div)); + pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, + (clk->parent->rate / clkr->div)); return (clk->parent->rate / clkr->div); } @@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == v) return; - printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); + printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name); if (cpu_is_omap34xx()) { omap2_clk_enable(clk); omap2_clk_disable(clk); diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index e4cef333e291..44de0271fc2f 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set; static struct clk *vclk; static struct clk *sclk; +static void __iomem *prcm_clksrc_ctrl; + /*------------------------------------------------------------------------- * Omap24xx specific clock functions *-------------------------------------------------------------------------*/ @@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk) { u32 pcc; - pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + pcc = __raw_readl(prcm_clksrc_ctrl); - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, - OMAP24XX_PRCM_CLKSRC_CTRL); + __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); return 0; } @@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk) { u32 pcc; - pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + pcc = __raw_readl(prcm_clksrc_ctrl); - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, - OMAP24XX_PRCM_CLKSRC_CTRL); + __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); } static const struct clkops clkops_oscck = { @@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void) { u32 div; - div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL); + div = __raw_readl(prcm_clksrc_ctrl); div &= OMAP_SYSCLKDIV_MASK; div >>= OMAP_SYSCLKDIV_SHIFT; @@ -714,15 +714,18 @@ int __init omap2_clk_init(void) struct omap_clk *c; u32 clkrate; - if (cpu_is_omap242x()) + if (cpu_is_omap242x()) { + prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_242X; - else if (cpu_is_omap2430()) + } else if (cpu_is_omap2430()) { + prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_243X; + } clk_init(&omap2_clk_functions); for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 88c5acb40fcf..458f00cdcbea 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -24,6 +24,17 @@ #include "cm-regbits-24xx.h" #include "sdrc.h" +/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ +#ifdef CONFIG_ARCH_OMAP2420 +#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL +#else +#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL +#endif + static unsigned long omap2_table_mpu_recalc(struct clk *clk); static int omap2_select_table_rate(struct clk *clk, unsigned long rate); static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index ba05aa42bd8e..9e43fe5209d3 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "modem_fck", &modem_fck, CK_343X), + CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), + CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), @@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = { #define MAX_DPLL_WAIT_TRIES 1000000 +#define MIN_SDRC_DLL_LOCK_FREQ 83000000 + /** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk @@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) { u32 new_div = 0; + u32 unlock_dll = 0; unsigned long validrate, sdrcrate; struct omap_sdrc_params *sp; @@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (!sp) return -EINVAL; - pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, - validrate); - pr_info("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); + if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { + pr_debug("clock: will unlock SDRC DLL\n"); + unlock_dll = 1; + } + + pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, + validrate); + pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", + sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); /* REVISIT: SRAM code doesn't support other M2 divisors yet */ WARN_ON(new_div != 1 && new_div != 2); /* REVISIT: Add SDRC_MR changing to this code also */ omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div); + sp->actim_ctrlb, new_div, unlock_dll); return 0; } @@ -956,7 +967,7 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) if (c->cpu & cpu_clkflg) { diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 017a30e9aa1d..e433aec4efdd 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -27,6 +27,8 @@ #include "prm.h" #include "prm-regbits-34xx.h" +#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR + static unsigned long omap3_dpll_recalc(struct clk *clk); static unsigned long omap3_clkoutx2_recalc(struct clk *clk); static void omap3_dpll_allow_idle(struct clk *clk); @@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = { .recalc = &followparent_recalc, }; +static struct clk modem_fck = { + .name = "modem_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MODEM_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sad2d_ick = { + .name = "sad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mad2d_ick = { + .name = "mad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430_EN_MAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + static const struct clksel omap343x_gpt_clksel[] = { { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, { .parent = &sys_ck, .rates = gpt_sys_rates }, @@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = { .recalc = &omap2_clksel_recalc, }; -/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */ - /* SECURITY_L4_ICK2 based clocks */ static struct clk security_l4_ick2 = { diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index 281d5da19188..fe319ae4ca0a 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = { static struct clockdomain d2d_clkdm = { .name = "d2d_clkdm", .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 6f3f5a36aae6..6923deb98a28 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -145,6 +145,8 @@ #define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits */ +#define OMAP3430_EN_MODEM (1 << 31) +#define OMAP3430_EN_MODEM_SHIFT 31 /* CM_ICLKEN1_CORE specific bits */ #define OMAP3430_EN_ICR (1 << 29) @@ -161,6 +163,8 @@ #define OMAP3430_EN_MAILBOXES_SHIFT 7 #define OMAP3430_EN_OMAPCTRL (1 << 6) #define OMAP3430_EN_OMAPCTRL_SHIFT 6 +#define OMAP3430_EN_SAD2D (1 << 3) +#define OMAP3430_EN_SAD2D_SHIFT 3 #define OMAP3430_EN_SDRC (1 << 1) #define OMAP3430_EN_SDRC_SHIFT 1 @@ -176,6 +180,10 @@ #define OMAP3430_EN_DES1 (1 << 0) #define OMAP3430_EN_DES1_SHIFT 0 +/* CM_ICLKEN3_CORE */ +#define OMAP3430_EN_MAD2D_SHIFT 3 +#define OMAP3430_EN_MAD2D (1 << 3) + /* CM_FCLKEN3_CORE specific bits */ #define OMAP3430ES2_EN_TS_SHIFT 1 #define OMAP3430ES2_EN_TS_MASK (1 << 1) @@ -231,6 +239,8 @@ #define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ +#define OMAP3430_AUTO_MODEM (1 << 31) +#define OMAP3430_AUTO_MODEM_SHIFT 31 #define OMAP3430ES2_AUTO_MMC3 (1 << 30) #define OMAP3430ES2_AUTO_MMC3_SHIFT 30 #define OMAP3430ES2_AUTO_ICR (1 << 29) @@ -287,6 +297,8 @@ #define OMAP3430_AUTO_HSOTGUSB_SHIFT 4 #define OMAP3430ES1_AUTO_D2D (1 << 3) #define OMAP3430ES1_AUTO_D2D_SHIFT 3 +#define OMAP3430_AUTO_SAD2D (1 << 3) +#define OMAP3430_AUTO_SAD2D_SHIFT 3 #define OMAP3430_AUTO_SSI (1 << 0) #define OMAP3430_AUTO_SSI_SHIFT 0 @@ -308,6 +320,8 @@ #define OMAP3430ES2_AUTO_USBTLL (1 << 2) #define OMAP3430ES2_AUTO_USBTLL_SHIFT 2 #define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2) +#define OMAP3430_AUTO_MAD2D_SHIFT 3 +#define OMAP3430_AUTO_MAD2D (1 << 3) /* CM_CLKSEL_CORE */ #define OMAP3430_CLKSEL_SSI_SHIFT 8 diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 65fdf78c91e1..1d3c93bf86d3 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -16,17 +16,12 @@ #include "prcm-common.h" -#ifndef __ASSEMBLER__ -#define OMAP_CM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg)) -#else #define OMAP2420_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) #define OMAP2430_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) -#endif /* * Architecture-specific global CM registers @@ -38,6 +33,7 @@ #define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) #define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) /* diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c new file mode 100644 index 000000000000..2fd22f9c5f0e --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -0,0 +1,330 @@ +/* + * linux/arch/arm/mach-omap2/gpmc-onenand.c + * + * Copyright (C) 2006 - 2009 Nokia Corporation + * Contacts: Juha Yrjola + * Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/onenand_regs.h> +#include <linux/io.h> + +#include <asm/mach/flash.h> + +#include <mach/onenand.h> +#include <mach/board.h> +#include <mach/gpmc.h> + +static struct omap_onenand_platform_data *gpmc_onenand_data; + +static struct platform_device gpmc_onenand_device = { + .name = "omap2-onenand", + .id = -1, +}; + +static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) +{ + struct gpmc_timings t; + + const int t_cer = 15; + const int t_avdp = 12; + const int t_aavdh = 7; + const int t_ce = 76; + const int t_aa = 76; + const int t_oe = 20; + const int t_cez = 20; /* max of t_cez, t_oez */ + const int t_ds = 30; + const int t_wpl = 40; + const int t_wph = 30; + + memset(&t, 0, sizeof(t)); + t.sync_clk = 0; + t.cs_on = 0; + t.adv_on = 0; + + /* Read */ + t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer)); + t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh); + t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa); + t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce)); + t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe)); + t.oe_off = t.access + gpmc_round_ns_to_ticks(1); + t.cs_rd_off = t.oe_off; + t.rd_cycle = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez); + + /* Write */ + t.adv_wr_off = t.adv_rd_off; + t.we_on = t.oe_on; + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = t.we_on; + t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds); + } + t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl); + t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); + t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + + /* Configure GPMC for asynchronous read */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, + GPMC_CONFIG1_DEVICESIZE_16 | + GPMC_CONFIG1_MUXADDDATA); + + return gpmc_cs_set_timings(cs, &t); +} + +static void set_onenand_cfg(void __iomem *onenand_base, int latency, + int sync_read, int sync_write, int hf) +{ + u32 reg; + + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); + reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | + ONENAND_SYS_CFG1_BL_16; + if (sync_read) + reg |= ONENAND_SYS_CFG1_SYNC_READ; + else + reg &= ~ONENAND_SYS_CFG1_SYNC_READ; + if (sync_write) + reg |= ONENAND_SYS_CFG1_SYNC_WRITE; + else + reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; + if (hf) + reg |= ONENAND_SYS_CFG1_HF; + else + reg &= ~ONENAND_SYS_CFG1_HF; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); +} + +static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, + void __iomem *onenand_base, + int freq) +{ + struct gpmc_timings t; + const int t_cer = 15; + const int t_avdp = 12; + const int t_cez = 20; /* max of t_cez, t_oez */ + const int t_ds = 30; + const int t_wpl = 40; + const int t_wph = 30; + int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; + int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; + int first_time = 0, hf = 0, sync_read = 0, sync_write = 0; + int err, ticks_cez; + int cs = cfg->cs; + u32 reg; + + if (cfg->flags & ONENAND_SYNC_READ) { + sync_read = 1; + } else if (cfg->flags & ONENAND_SYNC_READWRITE) { + sync_read = 1; + sync_write = 1; + } + + if (!freq) { + /* Very first call freq is not known */ + err = omap2_onenand_set_async_mode(cs, onenand_base); + if (err) + return err; + reg = readw(onenand_base + ONENAND_REG_VERSION_ID); + switch ((reg >> 4) & 0xf) { + case 0: + freq = 40; + break; + case 1: + freq = 54; + break; + case 2: + freq = 66; + break; + case 3: + freq = 83; + break; + case 4: + freq = 104; + break; + default: + freq = 54; + break; + } + first_time = 1; + } + + switch (freq) { + case 83: + min_gpmc_clk_period = 12; /* 83 MHz */ + t_ces = 5; + t_avds = 4; + t_avdh = 2; + t_ach = 6; + t_aavdh = 6; + t_rdyo = 9; + break; + case 66: + min_gpmc_clk_period = 15; /* 66 MHz */ + t_ces = 6; + t_avds = 5; + t_avdh = 2; + t_ach = 6; + t_aavdh = 6; + t_rdyo = 11; + break; + default: + min_gpmc_clk_period = 18; /* 54 MHz */ + t_ces = 7; + t_avds = 7; + t_avdh = 7; + t_ach = 9; + t_aavdh = 7; + t_rdyo = 15; + sync_write = 0; + break; + } + + tick_ns = gpmc_ticks_to_ns(1); + div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); + gpmc_clk_ns = gpmc_ticks_to_ns(div); + if (gpmc_clk_ns < 15) /* >66Mhz */ + hf = 1; + if (hf) + latency = 6; + else if (gpmc_clk_ns >= 25) /* 40 MHz*/ + latency = 3; + else + latency = 4; + + if (first_time) + set_onenand_cfg(onenand_base, latency, + sync_read, sync_write, hf); + + if (div == 1) { + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); + reg |= (1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3); + reg |= (1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4); + reg |= (1 << 7); + reg |= (1 << 23); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); + } else { + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); + reg &= ~(1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3); + reg &= ~(1 << 7); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg); + reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4); + reg &= ~(1 << 7); + reg &= ~(1 << 23); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); + } + + /* Set synchronous read timings */ + memset(&t, 0, sizeof(t)); + t.sync_clk = min_gpmc_clk_period; + t.cs_on = 0; + t.adv_on = 0; + fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds)); + fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns); + t.page_burst_access = gpmc_clk_ns; + + /* Read */ + t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh)); + t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach)); + t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div); + t.oe_off = t.access + gpmc_round_ns_to_ticks(1); + t.cs_rd_off = t.oe_off; + ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div; + t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div + + ticks_cez); + + /* Write */ + if (sync_write) { + t.adv_wr_off = t.adv_rd_off; + t.we_on = 0; + t.we_off = t.cs_rd_off; + t.cs_wr_off = t.cs_rd_off; + t.wr_cycle = t.rd_cycle; + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset + + gpmc_ns_to_ticks(min_gpmc_clk_period + + t_rdyo)); + t.wr_access = t.access; + } + } else { + t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int, + t_avdp, t_cer)); + t.we_on = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh); + t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl); + t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); + t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + if (cpu_is_omap34xx()) { + t.wr_data_mux_bus = t.we_on; + t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds); + } + } + + /* Configure GPMC for synchronous read */ + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, + GPMC_CONFIG1_WRAPBURST_SUPP | + GPMC_CONFIG1_READMULTIPLE_SUPP | + (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) | + (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) | + (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) | + GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) | + GPMC_CONFIG1_PAGE_LEN(2) | + (cpu_is_omap34xx() ? 0 : + (GPMC_CONFIG1_WAIT_READ_MON | + GPMC_CONFIG1_WAIT_PIN_SEL(0))) | + GPMC_CONFIG1_DEVICESIZE_16 | + GPMC_CONFIG1_DEVICETYPE_NOR | + GPMC_CONFIG1_MUXADDDATA); + + err = gpmc_cs_set_timings(cs, &t); + if (err) + return err; + + set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf); + + return 0; +} + +static int gpmc_onenand_setup(void __iomem *onenand_base, int freq) +{ + struct device *dev = &gpmc_onenand_device.dev; + + /* Set sync timings in GPMC */ + if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, + freq) < 0) { + dev_err(dev, "Unable to set synchronous mode\n"); + return -EINVAL; + } + + return 0; +} + +void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) +{ + gpmc_onenand_data = _onenand_data; + gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; + gpmc_onenand_device.dev.platform_data = gpmc_onenand_data; + + if (cpu_is_omap24xx() && + (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { + printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n"); + gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; + gpmc_onenand_data->flags |= ONENAND_SYNC_READ; + } + + if (platform_device_register(&gpmc_onenand_device) < 0) { + printk(KERN_ERR "Unable to register OneNAND device\n"); + return; + } +} diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c new file mode 100644 index 000000000000..df99d31d8b64 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -0,0 +1,189 @@ +/* + * linux/arch/arm/mach-omap2/gpmc-smc91x.c + * + * Copyright (C) 2009 Nokia Corporation + * Contact: Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/smc91x.h> + +#include <mach/board.h> +#include <mach/gpmc.h> +#include <mach/gpmc-smc91x.h> + +static struct omap_smc91x_platform_data *gpmc_cfg; + +static struct resource gpmc_smc91x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smc91x_platdata gpmc_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, +}; + +static struct platform_device gpmc_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, + .dev = { + .platform_data = &gpmc_smc91x_info, + }, +}; + +/* + * Set the gpmc timings for smc91c96. The timings are taken + * from the data sheet available at: + * http://www.smsc.com/main/catalog/lan91c96.html + * REVISIT: Level shifters can add at least to the access latency. + */ +static int smc91c96_gpmc_retime(void) +{ + struct gpmc_timings t; + const int t3 = 10; /* Figure 12.2 read and 12.4 write */ + const int t4_r = 20; /* Figure 12.2 read */ + const int t4_w = 5; /* Figure 12.4 write */ + const int t5 = 25; /* Figure 12.2 read */ + const int t6 = 15; /* Figure 12.2 read */ + const int t7 = 5; /* Figure 12.4 write */ + const int t8 = 5; /* Figure 12.4 write */ + const int t20 = 185; /* Figure 12.2 read and 12.4 write */ + u32 l; + + memset(&t, 0, sizeof(t)); + + /* Read timings */ + t.cs_on = 0; + t.adv_on = t.cs_on; + t.oe_on = t.adv_on + t3; + t.access = t.oe_on + t5; + t.oe_off = t.access; + t.adv_rd_off = t.oe_off + max(t4_r, t6); + t.cs_rd_off = t.oe_off; + t.rd_cycle = t20 - t.oe_on; + + /* Write timings */ + t.we_on = t.adv_on + t3; + + if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) { + t.wr_data_mux_bus = t.we_on; + t.we_off = t.wr_data_mux_bus + t7; + } else + t.we_off = t.we_on + t7; + if (cpu_is_omap34xx()) + t.wr_access = t.we_off; + t.adv_wr_off = t.we_off + max(t4_w, t8); + t.cs_wr_off = t.we_off + t4_w; + t.wr_cycle = t20 - t.we_on; + + l = GPMC_CONFIG1_DEVICESIZE_16; + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + l |= GPMC_CONFIG1_MUXADDDATA; + if (gpmc_cfg->flags & GPMC_READ_MON) + l |= GPMC_CONFIG1_WAIT_READ_MON; + if (gpmc_cfg->flags & GPMC_WRITE_MON) + l |= GPMC_CONFIG1_WAIT_WRITE_MON; + if (gpmc_cfg->wait_pin) + l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin); + gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l); + + /* + * FIXME: Calculate the address and data bus muxed timings. + * Note that at least adv_rd_off needs to be changed according + * to omap3430 TRM Figure 11-11. Are the sdp boards using the + * FPGA in between smc91x and omap as the timings are different + * from above? + */ + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + return 0; + + return gpmc_cs_set_timings(gpmc_cfg->cs, &t); +} + +/* + * Initialize smc91x device connected to the GPMC. Note that we + * assume that pin multiplexing is done in the board-*.c file, + * or in the bootloader. + */ +void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) +{ + unsigned long cs_mem_base; + int ret; + + gpmc_cfg = board_data; + + if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) + gpmc_cfg->retime = smc91c96_gpmc_retime; + + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + return; + } + + gpmc_smc91x_resources[0].start = cs_mem_base + 0x300; + gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; + gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + + if (gpmc_cfg->retime) { + ret = gpmc_cfg->retime(); + if (ret != 0) + goto free1; + } + + if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0) + goto free1; + + gpio_direction_input(gpmc_cfg->gpio_irq); + gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); + + if (gpmc_cfg->gpio_pwrdwn) { + ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown"); + if (ret) + goto free2; + gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0); + } + + if (gpmc_cfg->gpio_reset) { + ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset"); + if (ret) + goto free3; + + gpio_direction_output(gpmc_cfg->gpio_reset, 0); + gpio_set_value(gpmc_cfg->gpio_reset, 1); + msleep(100); + gpio_set_value(gpmc_cfg->gpio_reset, 0); + } + + if (platform_device_register(&gpmc_smc91x_device) < 0) { + printk(KERN_ERR "Unable to register smc91x device\n"); + gpio_free(gpmc_cfg->gpio_reset); + goto free3; + } + + return; + +free3: + if (gpmc_cfg->gpio_pwrdwn) + gpio_free(gpmc_cfg->gpio_pwrdwn); +free2: + gpio_free(gpmc_cfg->gpio_irq); +free1: + gpmc_cs_free(gpmc_cfg->cs); + + printk(KERN_ERR "Could not initialize smc91x\n"); +} diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2249049c1d5a..f91934b2b092 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -5,6 +5,9 @@ * * Author: Juha Yrjola * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -424,6 +427,9 @@ void __init gpmc_init(void) } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; + } else if (cpu_is_omap44xx()) { + ck = "gpmc_fck"; + l = OMAP44XX_GPMC_BASE; } gpmc_l3_clk = clk_get(NULL, ck); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 34b5914e0f8b..458990e20c60 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -6,6 +6,9 @@ * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -200,7 +203,10 @@ void __init omap2_check_revision(void) omap24xx_check_revision(); else if (cpu_is_omap34xx()) omap34xx_check_revision(); - else + else if (cpu_is_omap44xx()) { + printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + return; + } else pr_err("OMAP revision unknown, please fix!\n"); /* diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 916fcd3a2328..32afd9448216 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -4,12 +4,14 @@ * OMAP2 I/O mapping code * * Copyright (C) 2005 Nokia Corporation - * Copyright (C) 2007 Texas Instruments + * Copyright (C) 2007-2009 Texas Instruments * * Author: * Juha Yrjola <juha.yrjola@nokia.com> * Syed Khasim <x0khasim@ti.com> * + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -30,6 +32,7 @@ #include <mach/sdrc.h> #include <mach/gpmc.h> +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" #include <mach/powerdomain.h> @@ -38,7 +41,7 @@ #include <mach/clockdomain.h> #include "clockdomains.h" - +#endif /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. @@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = { }, }; #endif +#ifdef CONFIG_ARCH_OMAP4 +static struct map_desc omap44xx_io_desc[] __initdata = { + { + .virtual = L3_44XX_VIRT, + .pfn = __phys_to_pfn(L3_44XX_PHYS), + .length = L3_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_44XX_VIRT, + .pfn = __phys_to_pfn(L4_44XX_PHYS), + .length = L4_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_WK_44XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_44XX_PHYS), + .length = L4_WK_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_GPMC_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS), + .length = OMAP44XX_GPMC_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER_44XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), + .length = L4_PER_44XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_EMU_44XX_VIRT, + .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS), + .length = L4_EMU_44XX_SIZE, + .type = MT_DEVICE, + }, +}; +#endif void __init omap2_map_common_io(void) { @@ -183,6 +226,9 @@ void __init omap2_map_common_io(void) iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); #endif +#if defined(CONFIG_ARCH_OMAP4) + iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); +#endif /* Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU * revision check below. @@ -198,9 +244,11 @@ void __init omap2_map_common_io(void) void __init omap2_init_common_hw(struct omap_sdrc_params *sp) { omap2_mux_init(); +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); omap2_sdrc_init(sp); +#endif gpmc_init(); } diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c new file mode 100644 index 000000000000..015f22a53ead --- /dev/null +++ b/arch/arm/mach-omap2/iommu2.c @@ -0,0 +1,323 @@ +/* + * omap iommu: omap2/3 architecture specific functions + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, + * Paul Mundt and Toshihiro Kobayashi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/stringify.h> + +#include <mach/iommu.h> + +/* + * omap2 architecture specific register bit definitions + */ +#define IOMMU_ARCH_VERSION 0x00000011 + +/* SYSCONF */ +#define MMU_SYS_IDLE_SHIFT 3 +#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT) +#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT) + +#define MMU_SYS_SOFTRESET (1 << 1) +#define MMU_SYS_AUTOIDLE 1 + +/* SYSSTATUS */ +#define MMU_SYS_RESETDONE 1 + +/* IRQSTATUS & IRQENABLE */ +#define MMU_IRQ_MULTIHITFAULT (1 << 4) +#define MMU_IRQ_TABLEWALKFAULT (1 << 3) +#define MMU_IRQ_EMUMISS (1 << 2) +#define MMU_IRQ_TRANSLATIONFAULT (1 << 1) +#define MMU_IRQ_TLBMISS (1 << 0) +#define MMU_IRQ_MASK \ + (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \ + MMU_IRQ_TRANSLATIONFAULT) + +/* MMU_CNTL */ +#define MMU_CNTL_SHIFT 1 +#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT) +#define MMU_CNTL_EML_TLB (1 << 3) +#define MMU_CNTL_TWL_EN (1 << 2) +#define MMU_CNTL_MMU_EN (1 << 1) + +#define get_cam_va_mask(pgsz) \ + (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \ + ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \ + ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ + ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) + +static int omap2_iommu_enable(struct iommu *obj) +{ + u32 l, pa; + unsigned long timeout; + + if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) + return -EINVAL; + + pa = virt_to_phys(obj->iopgd); + if (!IS_ALIGNED(pa, SZ_16K)) + return -EINVAL; + + iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG); + + timeout = jiffies + msecs_to_jiffies(20); + do { + l = iommu_read_reg(obj, MMU_SYSSTATUS); + if (l & MMU_SYS_RESETDONE) + break; + } while (time_after(jiffies, timeout)); + + if (!(l & MMU_SYS_RESETDONE)) { + dev_err(obj->dev, "can't take mmu out of reset\n"); + return -ENODEV; + } + + l = iommu_read_reg(obj, MMU_REVISION); + dev_info(obj->dev, "%s: version %d.%d\n", obj->name, + (l >> 4) & 0xf, l & 0xf); + + l = iommu_read_reg(obj, MMU_SYSCONFIG); + l &= ~MMU_SYS_IDLE_MASK; + l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); + iommu_write_reg(obj, l, MMU_SYSCONFIG); + + iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE); + iommu_write_reg(obj, pa, MMU_TTB); + + l = iommu_read_reg(obj, MMU_CNTL); + l &= ~MMU_CNTL_MASK; + l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); + iommu_write_reg(obj, l, MMU_CNTL); + + return 0; +} + +static void omap2_iommu_disable(struct iommu *obj) +{ + u32 l = iommu_read_reg(obj, MMU_CNTL); + + l &= ~MMU_CNTL_MASK; + iommu_write_reg(obj, l, MMU_CNTL); + iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG); + + dev_dbg(obj->dev, "%s is shutting down\n", obj->name); +} + +static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) +{ + int i; + u32 stat, da; + const char *err_msg[] = { + "tlb miss", + "translation fault", + "emulation miss", + "table walk fault", + "multi hit fault", + }; + + stat = iommu_read_reg(obj, MMU_IRQSTATUS); + stat &= MMU_IRQ_MASK; + if (!stat) + return 0; + + da = iommu_read_reg(obj, MMU_FAULT_AD); + *ra = da; + + dev_err(obj->dev, "%s:\tda:%08x ", __func__, da); + + for (i = 0; i < ARRAY_SIZE(err_msg); i++) { + if (stat & (1 << i)) + printk("%s ", err_msg[i]); + } + printk("\n"); + + iommu_write_reg(obj, stat, MMU_IRQSTATUS); + return stat; +} + +static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr) +{ + cr->cam = iommu_read_reg(obj, MMU_READ_CAM); + cr->ram = iommu_read_reg(obj, MMU_READ_RAM); +} + +static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr) +{ + iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); + iommu_write_reg(obj, cr->ram, MMU_RAM); +} + +static u32 omap2_cr_to_virt(struct cr_regs *cr) +{ + u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK; + u32 mask = get_cam_va_mask(cr->cam & page_size); + + return cr->cam & mask; +} + +static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e) +{ + struct cr_regs *cr; + + if (e->da & ~(get_cam_va_mask(e->pgsz))) { + dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__, + e->da); + return ERR_PTR(-EINVAL); + } + + cr = kmalloc(sizeof(*cr), GFP_KERNEL); + if (!cr) + return ERR_PTR(-ENOMEM); + + cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz; + cr->ram = e->pa | e->endian | e->elsz | e->mixed; + + return cr; +} + +static inline int omap2_cr_valid(struct cr_regs *cr) +{ + return cr->cam & MMU_CAM_V; +} + +static u32 omap2_get_pte_attr(struct iotlb_entry *e) +{ + u32 attr; + + attr = e->mixed << 5; + attr |= e->endian; + attr |= e->elsz >> 3; + attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6); + + return attr; +} + +static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf) +{ + char *p = buf; + + /* FIXME: Need more detail analysis of cam/ram */ + p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram); + + return p - buf; +} + +#define pr_reg(name) \ + p += sprintf(p, "%20s: %08x\n", \ + __stringify(name), iommu_read_reg(obj, MMU_##name)); + +static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf) +{ + char *p = buf; + + pr_reg(REVISION); + pr_reg(SYSCONFIG); + pr_reg(SYSSTATUS); + pr_reg(IRQSTATUS); + pr_reg(IRQENABLE); + pr_reg(WALKING_ST); + pr_reg(CNTL); + pr_reg(FAULT_AD); + pr_reg(TTB); + pr_reg(LOCK); + pr_reg(LD_TLB); + pr_reg(CAM); + pr_reg(RAM); + pr_reg(GFLUSH); + pr_reg(FLUSH_ENTRY); + pr_reg(READ_CAM); + pr_reg(READ_RAM); + pr_reg(EMU_FAULT_AD); + + return p - buf; +} + +static void omap2_iommu_save_ctx(struct iommu *obj) +{ + int i; + u32 *p = obj->ctx; + + for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { + p[i] = iommu_read_reg(obj, i * sizeof(u32)); + dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); + } + + BUG_ON(p[0] != IOMMU_ARCH_VERSION); +} + +static void omap2_iommu_restore_ctx(struct iommu *obj) +{ + int i; + u32 *p = obj->ctx; + + for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { + iommu_write_reg(obj, p[i], i * sizeof(u32)); + dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); + } + + BUG_ON(p[0] != IOMMU_ARCH_VERSION); +} + +static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) +{ + e->da = cr->cam & MMU_CAM_VATAG_MASK; + e->pa = cr->ram & MMU_RAM_PADDR_MASK; + e->valid = cr->cam & MMU_CAM_V; + e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK; + e->endian = cr->ram & MMU_RAM_ENDIAN_MASK; + e->elsz = cr->ram & MMU_RAM_ELSZ_MASK; + e->mixed = cr->ram & MMU_RAM_MIXED; +} + +static const struct iommu_functions omap2_iommu_ops = { + .version = IOMMU_ARCH_VERSION, + + .enable = omap2_iommu_enable, + .disable = omap2_iommu_disable, + .fault_isr = omap2_iommu_fault_isr, + + .tlb_read_cr = omap2_tlb_read_cr, + .tlb_load_cr = omap2_tlb_load_cr, + + .cr_to_e = omap2_cr_to_e, + .cr_to_virt = omap2_cr_to_virt, + .alloc_cr = omap2_alloc_cr, + .cr_valid = omap2_cr_valid, + .dump_cr = omap2_dump_cr, + + .get_pte_attr = omap2_get_pte_attr, + + .save_ctx = omap2_iommu_save_ctx, + .restore_ctx = omap2_iommu_restore_ctx, + .dump_ctx = omap2_iommu_dump_ctx, +}; + +static int __init omap2_iommu_init(void) +{ + return install_iommu_arch(&omap2_iommu_ops); +} +module_init(omap2_iommu_init); + +static void __exit omap2_iommu_exit(void) +{ + uninstall_iommu_arch(&omap2_iommu_ops); +} +module_exit(omap2_iommu_exit); + +MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); +MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 998c5c45587e..b82863887f10 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -28,7 +28,6 @@ #define INTC_MIR_CLEAR0 0x0088 #define INTC_MIR_SET0 0x008c #define INTC_PENDING_IRQ0 0x0098 - /* Number of IRQ state bits in each MIR register */ #define IRQ_BITS_PER_REG 32 @@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, - .disable = omap_mask_irq, }; static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) @@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); } +int omap_irq_pending(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + struct omap_irq_bank *bank = irq_banks + i; + int irq; + + for (irq = 0; irq < bank->nr_irqs; irq += 32) + if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 + + ((irq >> 5) << 5))) + return 1; + } + return 0; +} + void __init omap_init_irq(void) { unsigned long nr_of_irqs = 0; diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index dc40b3e72206..9756a878fd90 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -16,8 +16,8 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <linux/i2c/twl4030.h> -#include <linux/regulator/machine.h> +#include <linux/mmc/host.h> +#include <linux/regulator/consumer.h> #include <mach/hardware.h> #include <mach/control.h> @@ -26,31 +26,9 @@ #include "mmc-twl4030.h" -#if defined(CONFIG_TWL4030_CORE) && \ - (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) -#define LDO_CLR 0x00 -#define VSEL_S2_CLR 0x40 - -#define VMMC1_DEV_GRP 0x27 -#define VMMC1_CLR 0x00 -#define VMMC1_315V 0x03 -#define VMMC1_300V 0x02 -#define VMMC1_285V 0x01 -#define VMMC1_185V 0x00 -#define VMMC1_DEDICATED 0x2A - -#define VMMC2_DEV_GRP 0x2B -#define VMMC2_CLR 0x40 -#define VMMC2_315V 0x0c -#define VMMC2_300V 0x0b -#define VMMC2_285V 0x0a -#define VMMC2_280V 0x09 -#define VMMC2_260V 0x08 -#define VMMC2_185V 0x06 -#define VMMC2_DEDICATED 0x2E - -#define VMMC_DEV_GRP_P1 0x20 +#if defined(CONFIG_REGULATOR) && \ + (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) static u16 control_pbias_offset; static u16 control_devconf1_offset; @@ -59,19 +37,16 @@ static u16 control_devconf1_offset; static struct twl_mmc_controller { struct omap_mmc_platform_data *mmc; - u8 twl_vmmc_dev_grp; - u8 twl_mmc_dedicated; - char name[HSMMC_NAME_LEN + 1]; -} hsmmc[OMAP34XX_NR_MMC] = { - { - .twl_vmmc_dev_grp = VMMC1_DEV_GRP, - .twl_mmc_dedicated = VMMC1_DEDICATED, - }, - { - .twl_vmmc_dev_grp = VMMC2_DEV_GRP, - .twl_mmc_dedicated = VMMC2_DEDICATED, - }, -}; + /* Vcc == configured supply + * Vcc_alt == optional + * - MMC1, supply for DAT4..DAT7 + * - MMC2/MMC2, external level shifter voltage supply, for + * chip (SDIO, eMMC, etc) or transceiver (MMC2 only) + */ + struct regulator *vcc; + struct regulator *vcc_aux; + char name[HSMMC_NAME_LEN + 1]; +} hsmmc[OMAP34XX_NR_MMC]; static int twl_mmc_card_detect(int irq) { @@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev) int ret = 0; int i; - ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd"); - if (ret) - goto done; - ret = gpio_direction_input(mmc->slots[0].switch_pin); - if (ret) - goto err; + /* MMC/SD/SDIO doesn't require a card detect switch */ + if (gpio_is_valid(mmc->slots[0].switch_pin)) { + ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd"); + if (ret) + goto done; + ret = gpio_direction_input(mmc->slots[0].switch_pin); + if (ret) + goto err; + } + /* require at least main regulator */ for (i = 0; i < ARRAY_SIZE(hsmmc); i++) { if (hsmmc[i].name == mmc->slots[0].name) { + struct regulator *reg; + hsmmc[i].mmc = mmc; + + reg = regulator_get(dev, "vmmc"); + if (IS_ERR(reg)) { + dev_dbg(dev, "vmmc regulator missing\n"); + /* HACK: until fixed.c regulator is usable, + * we don't require a main regulator + * for MMC2 or MMC3 + */ + if (i != 0) + break; + ret = PTR_ERR(reg); + goto err; + } + hsmmc[i].vcc = reg; + mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg); + + /* allow an aux regulator */ + reg = regulator_get(dev, "vmmc_aux"); + hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg; + + /* UGLY HACK: workaround regulator framework bugs. + * When the bootloader leaves a supply active, it's + * initialized with zero usecount ... and we can't + * disable it without first enabling it. Until the + * framework is fixed, we need a workaround like this + * (which is safe for MMC, but not in general). + */ + if (regulator_is_enabled(hsmmc[i].vcc) > 0) { + regulator_enable(hsmmc[i].vcc); + regulator_disable(hsmmc[i].vcc); + } + if (hsmmc[i].vcc_aux) { + if (regulator_is_enabled(reg) > 0) { + regulator_enable(reg); + regulator_disable(reg); + } + } + break; } } @@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot) #define twl_mmc_resume NULL #endif -/* - * Sets the MMC voltage in twl4030 - */ - -#define MMC1_OCR (MMC_VDD_165_195 \ - |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) -#define MMC2_OCR (MMC_VDD_165_195 \ - |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \ - |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) - -static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd) -{ - int ret; - u8 vmmc = 0, dev_grp_val; - - if (!vdd) - goto doit; - - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) { - /* VMMC1: max 220 mA. And for 8-bit mode, - * VSIM: max 50 mA - */ - switch (1 << vdd) { - case MMC_VDD_165_195: - vmmc = VMMC1_185V; - /* and VSIM_180V */ - break; - case MMC_VDD_28_29: - vmmc = VMMC1_285V; - /* and VSIM_280V */ - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: - vmmc = VMMC1_300V; - /* and VSIM_300V */ - break; - case MMC_VDD_31_32: - vmmc = VMMC1_315V; - /* error if VSIM needed */ - break; - default: - return -EINVAL; - } - } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) { - /* VMMC2: max 100 mA */ - switch (1 << vdd) { - case MMC_VDD_165_195: - vmmc = VMMC2_185V; - break; - case MMC_VDD_25_26: - case MMC_VDD_26_27: - vmmc = VMMC2_260V; - break; - case MMC_VDD_27_28: - vmmc = VMMC2_280V; - break; - case MMC_VDD_28_29: - vmmc = VMMC2_285V; - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: - vmmc = VMMC2_300V; - break; - case MMC_VDD_31_32: - vmmc = VMMC2_315V; - break; - default: - return -EINVAL; - } - } else { - return -EINVAL; - } - -doit: - if (vdd) - dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */ - else - dev_grp_val = LDO_CLR; /* Power down */ - - ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - dev_grp_val, c->twl_vmmc_dev_grp); - if (ret || !vdd) - return ret; - - ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - vmmc, c->twl_mmc_dedicated); - - return ret; -} - static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, int vdd) { @@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, /* * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the - * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both + * card with Vcc regulator (from twl4030 or whatever). OMAP has both * 1.8V and 3.0V modes, controlled by the PBIAS register. * * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which * is most naturally TWL VSIM; those pins also use PBIAS. + * + * FIXME handle VMMC1A as needed ... */ if (power_on) { if (cpu_is_omap2430()) { @@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, reg &= ~OMAP2_PBIASLITEPWRDNZ0; omap_ctrl_writel(reg, control_pbias_offset); - ret = twl_mmc_set_voltage(c, vdd); + ret = mmc_regulator_set_ocr(c->vcc, vdd); /* 100ms delay required for PBIAS configuration */ msleep(100); @@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, reg &= ~OMAP2_PBIASLITEPWRDNZ0; omap_ctrl_writel(reg, control_pbias_offset); - ret = twl_mmc_set_voltage(c, 0); + ret = mmc_regulator_set_ocr(c->vcc, 0); /* 100ms delay required for PBIAS configuration */ msleep(100); @@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, return ret; } -static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd) +static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd) { - int ret; + int ret = 0; struct twl_mmc_controller *c = &hsmmc[1]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* If we don't see a Vcc regulator, assume it's a fixed + * voltage always-on regulator. + */ + if (!c->vcc) + return 0; + /* - * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP + * Assume Vcc regulator is used only to power the card ... OMAP * VDDS is used to power the pins, optionally with a transceiver to * support cards using voltages other than VDDS (1.8V nominal). When a * transceiver is used, DAT3..7 are muxed as transceiver control pins. + * + * In some cases this regulator won't support enable/disable; + * e.g. it's a fixed rail for a WLAN chip. + * + * In other cases vcc_aux switches interface power. Example, for + * eMMC cards it represents VccQ. Sometimes transceivers or SDIO + * chips/cards need an interface voltage rail too. */ if (power_on) { + /* only MMC2 supports a CLKIN */ if (mmc->slots[0].internal_clock) { u32 reg; @@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd reg |= OMAP2_MMCSDIO2ADPCLKISEL; omap_ctrl_writel(reg, control_devconf1_offset); } - ret = twl_mmc_set_voltage(c, vdd); + ret = mmc_regulator_set_ocr(c->vcc, vdd); + /* enable interface voltage rail, if needed */ + if (ret == 0 && c->vcc_aux) { + ret = regulator_enable(c->vcc_aux); + if (ret < 0) + ret = mmc_regulator_set_ocr(c->vcc, 0); + } } else { - ret = twl_mmc_set_voltage(c, 0); + if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0) + ret = regulator_disable(c->vcc_aux); + if (ret == 0) + ret = mmc_regulator_set_ocr(c->vcc, 0); } return ret; } -static int twl_mmc3_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - /* - * Assume MMC3 has self-powered device connected, for example on-board - * chip with external power source. - */ - return 0; -} - static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) @@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) mmc->slots[0].wires = c->wires; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; + mmc->init = twl_mmc_late_init; - /* note: twl4030 card detect GPIOs normally switch VMMCx ... */ + /* note: twl4030 card detect GPIOs can disable VMMCx ... */ if (gpio_is_valid(c->gpio_cd)) { - mmc->init = twl_mmc_late_init; mmc->cleanup = twl_mmc_cleanup; mmc->suspend = twl_mmc_suspend; mmc->resume = twl_mmc_resume; @@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) } else mmc->slots[0].gpio_wp = -EINVAL; - /* NOTE: we assume OMAP's MMC1 and MMC2 use - * the TWL4030's VMMC1 and VMMC2, respectively; - * and that MMC3 device has it's own power source. + /* NOTE: MMC slots should have a Vcc regulator set up. + * This may be from a TWL4030-family chip, another + * controllable regulator, or a fixed supply. + * + * temporary HACK: ocr_mask instead of fixed supply */ + mmc->slots[0].ocr_mask = c->ocr_mask; switch (c->mmc) { case 1: + /* on-chip level shifting via PBIAS0/PBIAS1 */ mmc->slots[0].set_power = twl_mmc1_set_power; - mmc->slots[0].ocr_mask = MMC1_OCR; break; case 2: - mmc->slots[0].set_power = twl_mmc2_set_power; - if (c->transceiver) - mmc->slots[0].ocr_mask = MMC2_OCR; - else - mmc->slots[0].ocr_mask = MMC_VDD_165_195; - break; + if (c->ext_clock) + c->transceiver = 1; + if (c->transceiver && c->wires > 4) + c->wires = 4; + /* FALLTHROUGH */ case 3: - mmc->slots[0].set_power = twl_mmc3_set_power; - mmc->slots[0].ocr_mask = MMC_VDD_165_195; + /* off-chip level shifting, or none */ + mmc->slots[0].set_power = twl_mmc23_set_power; break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h index ea59e8624290..3807c45c9a6c 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.h +++ b/arch/arm/mach-omap2/mmc-twl4030.h @@ -16,9 +16,10 @@ struct twl4030_hsmmc_info { int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ struct device *dev; /* returned: pointer to mmc adapter */ + int ocr_mask; /* temporary HACK */ }; -#if defined(CONFIG_TWL4030_CORE) && \ +#if defined(CONFIG_REGULATOR) && \ (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S new file mode 100644 index 000000000000..4afadba09477 --- /dev/null +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -0,0 +1,46 @@ +/* + * Secondary CPU startup routine source file. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Interface functions needed for the SMP. This file is based on arm + * realview smp platform. + * Copyright (c) 2003 ARM Limited. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + +/* Physical address needed since MMU not enabled yet on secondary core */ +#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804 + + __INIT + +/* + * OMAP4 specific entry point for secondary CPU to jump from ROM + * code. This routine also provides a holding flag into which + * secondary core is held until we're ready for it to initialise. + * The primary core will update the this flag using a hardware + * register AuxCoreBoot1. + */ +ENTRY(omap_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #0x0f +hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1 + ldr r2, [r1] + cmp r2, r0 + bne hold + + /* + * we've been released from the cpu_release,secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c new file mode 100644 index 000000000000..8fe8d230f21b --- /dev/null +++ b/arch/arm/mach-omap2/omap-smp.c @@ -0,0 +1,178 @@ +/* + * OMAP4 SMP source file. It contains platform specific fucntions + * needed for the linux smp kernel. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Platform file needed for the OMAP4 SMP. This file is based on arm + * realview smp platform. + * * Copyright (c) 2002 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/localtimer.h> +#include <asm/smp_scu.h> +#include <mach/hardware.h> + +/* Registers used for communicating startup information */ +#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800) +#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804) + +/* SCU base address */ +static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE; + +/* + * Use SCU config register to count number of cores + */ +static inline unsigned int get_core_count(void) +{ + if (scu_base) + return scu_get_core_count(scu_base); + return 1; +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * If any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + + gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * Update the AuxCoreBoot1 with boot state for secondary core. + * omap_secondary_startup() routine will hold the secondary core till + * the AuxCoreBoot1 register is updated with cpu state + * A barrier is added to ensure that write buffer is drained + */ + __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1); + smp_wmb(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) + ; + + /* + * Now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return 0; +} + +static void __init wakeup_secondary(void) +{ + /* + * Write the address of secondary startup routine into the + * AuxCoreBoot0 where ROM code will jump and start executing + * on secondary core once out of WFE + * A barrier is added to ensure that write buffer is drained + */ + __raw_writel(virt_to_phys(omap_secondary_startup), \ + OMAP4_AUXCOREBOOT_REG0); + smp_wmb(); + + /* + * Send a 'sev' to wake the secondary core from WFE. + */ + set_event(); + mb(); +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "OMAP4: strange core count of 0? Default to 1\n"); + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "OMAP4: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + /* + * Initialise the SCU and wake up the secondary core using + * wakeup_secondary(). + */ + scu_enable(scu_base); + wakeup_secondary(); + } +} diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c new file mode 100644 index 000000000000..194189c746c2 --- /dev/null +++ b/arch/arm/mach-omap2/omap3-iommu.c @@ -0,0 +1,105 @@ +/* + * omap iommu: omap3 device registration + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> + +#include <mach/iommu.h> + +#define OMAP3_MMU1_BASE 0x480bd400 +#define OMAP3_MMU2_BASE 0x5d000000 +#define OMAP3_MMU1_IRQ 24 +#define OMAP3_MMU2_IRQ 28 + + +static unsigned long iommu_base[] __initdata = { + OMAP3_MMU1_BASE, + OMAP3_MMU2_BASE, +}; + +static int iommu_irq[] __initdata = { + OMAP3_MMU1_IRQ, + OMAP3_MMU2_IRQ, +}; + +static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = { + { + .name = "isp", + .nr_tlb_entries = 8, + .clk_name = "cam_ick", + }, +#if defined(CONFIG_MPU_BRIDGE_IOMMU) + { + .name = "iva2", + .nr_tlb_entries = 32, + .clk_name = "iva2_ck", + }, +#endif +}; +#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata) + +static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES]; + +static int __init omap3_iommu_init(void) +{ + int i, err; + + for (i = 0; i < NR_IOMMU_DEVICES; i++) { + struct platform_device *pdev; + struct resource res[2]; + + pdev = platform_device_alloc("omap-iommu", i); + if (!pdev) { + err = -ENOMEM; + goto err_out; + } + + memset(res, 0, sizeof(res)); + res[0].start = iommu_base[i]; + res[0].end = iommu_base[i] + MMU_REG_SIZE - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = res[1].end = iommu_irq[i]; + res[1].flags = IORESOURCE_IRQ; + + err = platform_device_add_resources(pdev, res, + ARRAY_SIZE(res)); + if (err) + goto err_out; + err = platform_device_add_data(pdev, &omap3_iommu_pdata[i], + sizeof(omap3_iommu_pdata[0])); + if (err) + goto err_out; + err = platform_device_add(pdev); + if (err) + goto err_out; + omap3_iommu_pdev[i] = pdev; + } + return 0; + +err_out: + while (i--) + platform_device_put(omap3_iommu_pdev[i]); + return err; +} +module_init(omap3_iommu_init); + +static void __exit omap3_iommu_exit(void) +{ + int i; + + for (i = 0; i < NR_IOMMU_DEVICES; i++) + platform_device_unregister(omap3_iommu_pdev[i]); +} +module_exit(omap3_iommu_exit); + +MODULE_AUTHOR("Hiroshi DOYU"); +MODULE_DESCRIPTION("omap iommu: omap3 device registration"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c new file mode 100644 index 000000000000..6cc375a275be --- /dev/null +++ b/arch/arm/mach-omap2/pm-debug.c @@ -0,0 +1,152 @@ +/* + * OMAP Power Management debug routines + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Copyright (C) 2006-2008 Nokia Corporation + * + * Written by: + * Richard Woodruff <r-woodruff2@ti.com> + * Tony Lindgren + * Juha Yrjola + * Amit Kucheria <amit.kucheria@nokia.com> + * Igor Stoppa <igor.stoppa@nokia.com> + * Jouni Hogander + * + * Based on pm.c for omap2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/clock.h> +#include <mach/board.h> + +#include "prm.h" +#include "cm.h" +#include "pm.h" + +int omap2_pm_debug; + +#define DUMP_PRM_MOD_REG(mod, reg) \ + regs[reg_count].name = #mod "." #reg; \ + regs[reg_count++].val = prm_read_mod_reg(mod, reg) +#define DUMP_CM_MOD_REG(mod, reg) \ + regs[reg_count].name = #mod "." #reg; \ + regs[reg_count++].val = cm_read_mod_reg(mod, reg) +#define DUMP_PRM_REG(reg) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(reg) +#define DUMP_CM_REG(reg) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(reg) +#define DUMP_INTC_REG(reg, off) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off))) + +void omap2_pm_dump(int mode, int resume, unsigned int us) +{ + struct reg { + const char *name; + u32 val; + } regs[32]; + int reg_count = 0, i; + const char *s1 = NULL, *s2 = NULL; + + if (!resume) { +#if 0 + /* MPU */ + DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET); + DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL); + DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL); + DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST); + DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP); +#endif +#if 0 + /* INTC */ + DUMP_INTC_REG(INTC_MIR0, 0x0084); + DUMP_INTC_REG(INTC_MIR1, 0x00a4); + DUMP_INTC_REG(INTC_MIR2, 0x00c4); +#endif +#if 0 + DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1); + if (cpu_is_omap24xx()) { + DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2); + DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKEMUL_CTRL_OFFSET); + DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKSRC_CTRL_OFFSET); + } + DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN); + DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1); + DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2); + DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN); + DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN); + DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE); + DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST); +#endif +#if 0 + /* DSP */ + if (cpu_is_omap24xx()) { + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST); + } +#endif + } else { + DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1); + if (cpu_is_omap24xx()) + DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2); + DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST); + DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); +#if 1 + DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098); + DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8); + DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8); +#endif + } + + switch (mode) { + case 0: + s1 = "full"; + s2 = "retention"; + break; + case 1: + s1 = "MPU"; + s2 = "retention"; + break; + case 2: + s1 = "MPU"; + s2 = "idle"; + break; + } + + if (!resume) +#ifdef CONFIG_NO_HZ + printk(KERN_INFO + "--- Going to %s %s (next timer after %u ms)\n", s1, s2, + jiffies_to_msecs(get_next_timer_interrupt(jiffies) - + jiffies)); +#else + printk(KERN_INFO "--- Going to %s %s\n", s1, s2); +#endif + else + printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n", + us / 1000, us % 1000); + + for (i = 0; i < reg_count; i++) + printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); +} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c deleted file mode 100644 index ea8ceaed09cb..000000000000 --- a/arch/arm/mach-omap2/pm.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/pm.c - * - * OMAP2 Power Management Routines - * - * Copyright (C) 2006 Nokia Corporation - * Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2005 Texas Instruments, Inc. - * Richard Woodruff <r-woodruff2@ti.com> - * - * Based on pm.c for omap1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/suspend.h> -#include <linux/sched.h> -#include <linux/proc_fs.h> -#include <linux/interrupt.h> -#include <linux/sysfs.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/atomic.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> - -#include <mach/irqs.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/pm.h> - -static struct clk *vclk; -static void (*omap2_sram_idle)(void); -static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev); -static void (*saved_idle)(void); - -extern void __init pmdomain_init(void); -extern void pmdomain_set_autoidle(void); - -static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE]; - -void omap2_pm_idle(void) -{ - local_irq_disable(); - local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } - - omap2_sram_idle(); - local_fiq_enable(); - local_irq_enable(); -} - -static int omap2_pm_prepare(void) -{ - /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; - return 0; -} - -static int omap2_pm_suspend(void) -{ - return 0; -} - -static int omap2_pm_enter(suspend_state_t state) -{ - int ret = 0; - - switch (state) - { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap2_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static void omap2_pm_finish(void) -{ - pm_idle = saved_idle; -} - -static struct platform_suspend_ops omap_pm_ops = { - .prepare = omap2_pm_prepare, - .enter = omap2_pm_enter, - .finish = omap2_pm_finish, - .valid = suspend_valid_only_mem, -}; - -static int __init omap2_pm_init(void) -{ - return 0; -} - -__initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h new file mode 100644 index 000000000000..f7b3baf76678 --- /dev/null +++ b/arch/arm/mach-omap2/pm.h @@ -0,0 +1,38 @@ +/* + * OMAP2/3 Power Management Routines + * + * Copyright (C) 2008 Nokia Corporation + * Jouni Hogander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_PM_H +#define __ARCH_ARM_MACH_OMAP2_PM_H + +extern int omap2_pm_init(void); +extern int omap3_pm_init(void); + +#ifdef CONFIG_PM_DEBUG +extern void omap2_pm_dump(int mode, int resume, unsigned int us); +extern int omap2_pm_debug; +#else +#define omap2_pm_dump(mode, resume, us) do {} while (0); +#define omap2_pm_debug 0 +#endif /* CONFIG_PM_DEBUG */ + +extern void omap24xx_idle_loop_suspend(void); + +extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); +extern void omap34xx_cpu_suspend(u32 *addr, int save_state); +extern void save_secure_ram_context(u32 *addr); + +extern unsigned int omap24xx_idle_loop_suspend_sz; +extern unsigned int omap34xx_suspend_sz; +extern unsigned int save_secure_ram_context_sz; +extern unsigned int omap24xx_cpu_suspend_sz; +extern unsigned int omap34xx_cpu_suspend_sz; + +#endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c new file mode 100644 index 000000000000..db1025562fb0 --- /dev/null +++ b/arch/arm/mach-omap2/pm24xx.c @@ -0,0 +1,549 @@ +/* + * OMAP2 Power Management Routines + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Copyright (C) 2006-2008 Nokia Corporation + * + * Written by: + * Richard Woodruff <r-woodruff2@ti.com> + * Tony Lindgren + * Juha Yrjola + * Amit Kucheria <amit.kucheria@nokia.com> + * Igor Stoppa <igor.stoppa@nokia.com> + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/suspend.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/interrupt.h> +#include <linux/sysfs.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/time.h> +#include <linux/gpio.h> + +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/mach-types.h> + +#include <mach/irqs.h> +#include <mach/clock.h> +#include <mach/sram.h> +#include <mach/control.h> +#include <mach/mux.h> +#include <mach/dma.h> +#include <mach/board.h> + +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "pm.h" + +#include <mach/powerdomain.h> +#include <mach/clockdomain.h> + +static void (*omap2_sram_idle)(void); +static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); + +static struct powerdomain *mpu_pwrdm; +static struct powerdomain *core_pwrdm; + +static struct clockdomain *dsp_clkdm; +static struct clockdomain *gfx_clkdm; + +static struct clk *osc_ck, *emul_ck; + +static int omap2_fclks_active(void) +{ + u32 f1, f2; + + f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + + /* Ignore UART clocks. These are handled by UART core (serial.c) */ + f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2); + f2 &= ~OMAP24XX_EN_UART3; + + if (f1 | f2) + return 1; + return 0; +} + +static void omap2_enter_full_retention(void) +{ + u32 l; + struct timespec ts_preidle, ts_postidle, ts_idle; + + /* There is 1 reference hold for all children of the oscillator + * clock, the following will remove it. If no one else uses the + * oscillator itself it will be disabled if/when we enter retention + * mode. + */ + clk_disable(osc_ck); + + /* Clear old wake-up events */ + /* REVISIT: These write to reserved bits? */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + + /* + * Set MPU powerdomain's next power state to RETENTION; + * preserve logic state during retention + */ + pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + + /* Workaround to kill USB */ + l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL; + omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0); + + omap2_gpio_prepare_for_retention(); + + if (omap2_pm_debug) { + omap2_pm_dump(0, 0, 0); + getnstimeofday(&ts_preidle); + } + + /* One last check for pending IRQs to avoid extra latency due + * to sleeping unnecessarily. */ + if (omap_irq_pending()) + goto no_sleep; + + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + omap_uart_prepare_idle(2); + + /* Jump to SRAM suspend code */ + omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL), + OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL), + OMAP_SDRC_REGADDR(SDRC_POWER)); + + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + +no_sleep: + if (omap2_pm_debug) { + unsigned long long tmp; + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; + omap2_pm_dump(0, 1, tmp); + } + omap2_gpio_resume_after_retention(); + + clk_enable(osc_ck); + + /* clear CORE wake-up events */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + + /* wakeup domain events - bit 1: GPT1, bit5 GPIO */ + prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST); + + /* MPU domain wake events */ + l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + if (l & 0x01) + prm_write_mod_reg(0x01, OCP_MOD, + OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + if (l & 0x20) + prm_write_mod_reg(0x20, OCP_MOD, + OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + + /* Mask future PRCM-to-MPU interrupts */ + prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); +} + +static int omap2_i2c_active(void) +{ + u32 l; + + l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1); +} + +static int sti_console_enabled; + +static int omap2_allow_mpu_retention(void) +{ + u32 l; + + /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ + l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 | + OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 | + OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1)) + return 0; + /* Check for UART3. */ + l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + if (l & OMAP24XX_EN_UART3) + return 0; + if (sti_console_enabled) + return 0; + + return 1; +} + +static void omap2_enter_mpu_retention(void) +{ + int only_idle = 0; + struct timespec ts_preidle, ts_postidle, ts_idle; + + /* Putting MPU into the WFI state while a transfer is active + * seems to cause the I2C block to timeout. Why? Good question. */ + if (omap2_i2c_active()) + return; + + /* The peripherals seem not to be able to wake up the MPU when + * it is in retention mode. */ + if (omap2_allow_mpu_retention()) { + /* REVISIT: These write to reserved bits? */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + + /* Try to enter MPU retention */ + prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) | + OMAP_LOGICRETSTATE, + MPU_MOD, PM_PWSTCTRL); + } else { + /* Block MPU retention */ + + prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL); + only_idle = 1; + } + + if (omap2_pm_debug) { + omap2_pm_dump(only_idle ? 2 : 1, 0, 0); + getnstimeofday(&ts_preidle); + } + + omap2_sram_idle(); + + if (omap2_pm_debug) { + unsigned long long tmp; + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; + omap2_pm_dump(only_idle ? 2 : 1, 1, tmp); + } +} + +static int omap2_can_sleep(void) +{ + if (omap2_fclks_active()) + return 0; + if (osc_ck->usecount > 1) + return 0; + if (omap_dma_running()) + return 0; + + return 1; +} + +static void omap2_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + if (!omap2_can_sleep()) { + if (omap_irq_pending()) + goto out; + omap2_enter_mpu_retention(); + goto out; + } + + if (omap_irq_pending()) + goto out; + + omap2_enter_full_retention(); + +out: + local_fiq_enable(); + local_irq_enable(); +} + +static int omap2_pm_prepare(void) +{ + /* We cannot sleep in idle until we have resumed */ + disable_hlt(); + return 0; +} + +static int omap2_pm_suspend(void) +{ + u32 wken_wkup, mir1; + + wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN); + prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN); + + /* Mask GPT1 */ + mir1 = omap_readl(0x480fe0a4); + omap_writel(1 << 5, 0x480fe0ac); + + omap_uart_prepare_suspend(); + omap2_enter_full_retention(); + + omap_writel(mir1, 0x480fe0a4); + prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); + + return 0; +} + +static int omap2_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap2_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap2_pm_finish(void) +{ + enable_hlt(); +} + +static struct platform_suspend_ops omap_pm_ops = { + .prepare = omap2_pm_prepare, + .enter = omap2_pm_enter, + .finish = omap2_pm_finish, + .valid = suspend_valid_only_mem, +}; + +static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm) +{ + omap2_clkdm_allow_idle(clkdm); + return 0; +} + +static void __init prcm_setup_regs(void) +{ + int i, num_mem_banks; + struct powerdomain *pwrdm; + + /* Enable autoidle */ + prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD, + OMAP2_PRCM_SYSCONFIG_OFFSET); + + /* Set all domain wakeup dependencies */ + prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP); + prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); + prm_write_mod_reg(0, CORE_MOD, PM_WKDEP); + if (cpu_is_omap2430()) + prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP); + + /* + * Set CORE powerdomain memory banks to retain their contents + * during RETENTION + */ + num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm); + for (i = 0; i < num_mem_banks; i++) + pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET); + + /* Set CORE powerdomain's next power state to RETENTION */ + pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET); + + /* + * Set MPU powerdomain's next power state to RETENTION; + * preserve logic state during retention + */ + pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + + /* Force-power down DSP, GFX powerdomains */ + + pwrdm = clkdm_get_pwrdm(dsp_clkdm); + pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); + omap2_clkdm_sleep(dsp_clkdm); + + pwrdm = clkdm_get_pwrdm(gfx_clkdm); + pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); + omap2_clkdm_sleep(gfx_clkdm); + + /* Enable clockdomain hardware-supervised control for all clkdms */ + clkdm_for_each(_pm_clkdm_enable_hwsup); + + /* Enable clock autoidle for all domains */ + cm_write_mod_reg(OMAP24XX_AUTO_CAM | + OMAP24XX_AUTO_MAILBOXES | + OMAP24XX_AUTO_WDT4 | + OMAP2420_AUTO_WDT3 | + OMAP24XX_AUTO_MSPRO | + OMAP2420_AUTO_MMC | + OMAP24XX_AUTO_FAC | + OMAP2420_AUTO_EAC | + OMAP24XX_AUTO_HDQ | + OMAP24XX_AUTO_UART2 | + OMAP24XX_AUTO_UART1 | + OMAP24XX_AUTO_I2C2 | + OMAP24XX_AUTO_I2C1 | + OMAP24XX_AUTO_MCSPI2 | + OMAP24XX_AUTO_MCSPI1 | + OMAP24XX_AUTO_MCBSP2 | + OMAP24XX_AUTO_MCBSP1 | + OMAP24XX_AUTO_GPT12 | + OMAP24XX_AUTO_GPT11 | + OMAP24XX_AUTO_GPT10 | + OMAP24XX_AUTO_GPT9 | + OMAP24XX_AUTO_GPT8 | + OMAP24XX_AUTO_GPT7 | + OMAP24XX_AUTO_GPT6 | + OMAP24XX_AUTO_GPT5 | + OMAP24XX_AUTO_GPT4 | + OMAP24XX_AUTO_GPT3 | + OMAP24XX_AUTO_GPT2 | + OMAP2420_AUTO_VLYNQ | + OMAP24XX_AUTO_DSS, + CORE_MOD, CM_AUTOIDLE1); + cm_write_mod_reg(OMAP24XX_AUTO_UART3 | + OMAP24XX_AUTO_SSI | + OMAP24XX_AUTO_USB, + CORE_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(OMAP24XX_AUTO_SDRC | + OMAP24XX_AUTO_GPMC | + OMAP24XX_AUTO_SDMA, + CORE_MOD, CM_AUTOIDLE3); + cm_write_mod_reg(OMAP24XX_AUTO_PKA | + OMAP24XX_AUTO_AES | + OMAP24XX_AUTO_RNG | + OMAP24XX_AUTO_SHA | + OMAP24XX_AUTO_DES, + CORE_MOD, OMAP24XX_CM_AUTOIDLE4); + + cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE); + + /* Put DPLL and both APLLs into autoidle mode */ + cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) | + (0x03 << OMAP24XX_AUTO_96M_SHIFT) | + (0x03 << OMAP24XX_AUTO_54M_SHIFT), + PLL_MOD, CM_AUTOIDLE); + + cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL | + OMAP24XX_AUTO_WDT1 | + OMAP24XX_AUTO_MPU_WDT | + OMAP24XX_AUTO_GPIOS | + OMAP24XX_AUTO_32KSYNC | + OMAP24XX_AUTO_GPT1, + WKUP_MOD, CM_AUTOIDLE); + + /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk + * stabilisation */ + prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKSSETUP_OFFSET); + + /* Configure automatic voltage transition */ + prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, + OMAP2_PRCM_VOLTSETUP_OFFSET); + prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT | + (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) | + OMAP24XX_MEMRETCTRL | + (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) | + (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT), + OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET); + + /* Enable wake-up events */ + prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1, + WKUP_MOD, PM_WKEN); +} + +int __init omap2_pm_init(void) +{ + u32 l; + + if (!cpu_is_omap24xx()) + return -ENODEV; + + printk(KERN_INFO "Power Management for OMAP2 initializing\n"); + l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET); + printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); + + /* Look up important powerdomains, clockdomains */ + + mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); + if (!mpu_pwrdm) + pr_err("PM: mpu_pwrdm not found\n"); + + core_pwrdm = pwrdm_lookup("core_pwrdm"); + if (!core_pwrdm) + pr_err("PM: core_pwrdm not found\n"); + + dsp_clkdm = clkdm_lookup("dsp_clkdm"); + if (!dsp_clkdm) + pr_err("PM: mpu_clkdm not found\n"); + + gfx_clkdm = clkdm_lookup("gfx_clkdm"); + if (!gfx_clkdm) + pr_err("PM: gfx_clkdm not found\n"); + + + osc_ck = clk_get(NULL, "osc_ck"); + if (IS_ERR(osc_ck)) { + printk(KERN_ERR "could not get osc_ck\n"); + return -ENODEV; + } + + if (cpu_is_omap242x()) { + emul_ck = clk_get(NULL, "emul_ck"); + if (IS_ERR(emul_ck)) { + printk(KERN_ERR "could not get emul_ck\n"); + clk_put(osc_ck); + return -ENODEV; + } + } + + prcm_setup_regs(); + + /* Hack to prevent MPU retention when STI console is enabled. */ + { + const struct omap_sti_console_config *sti; + + sti = omap_get_config(OMAP_TAG_STI_CONSOLE, + struct omap_sti_console_config); + if (sti != NULL && sti->enable) + sti_console_enabled = 1; + } + + /* + * We copy the assembler sleep/wakeup routines to SRAM. + * These routines need to be in SRAM as that's the only + * memory the MPU can see when it wakes up. + */ + if (cpu_is_omap24xx()) { + omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend, + omap24xx_idle_loop_suspend_sz); + + omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend, + omap24xx_cpu_suspend_sz); + } + + suspend_set_ops(&omap_pm_ops); + pm_idle = omap2_pm_idle; + + return 0; +} + +late_initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c new file mode 100644 index 000000000000..841d4c5ed8be --- /dev/null +++ b/arch/arm/mach-omap2/pm34xx.c @@ -0,0 +1,710 @@ +/* + * OMAP3 Power Management Routines + * + * Copyright (C) 2006-2008 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * Jouni Hogander + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/pm.h> +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/gpio.h> + +#include <mach/sram.h> +#include <mach/clockdomain.h> +#include <mach/powerdomain.h> +#include <mach/control.h> +#include <mach/serial.h> + +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm-regbits-34xx.h" + +#include "prm.h" +#include "pm.h" + +struct power_state { + struct powerdomain *pwrdm; + u32 next_state; + u32 saved_state; + struct list_head node; +}; + +static LIST_HEAD(pwrst_list); + +static void (*_omap_sram_idle)(u32 *addr, int save_state); + +static struct powerdomain *mpu_pwrdm; + +/* PRCM Interrupt Handler for wakeups */ +static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +{ + u32 wkst, irqstatus_mpu; + u32 fclk, iclk; + + /* WKUP */ + wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); + fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); + cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN); + cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN); + prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST); + while (prm_read_mod_reg(WKUP_MOD, PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN); + cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN); + } + + /* CORE */ + wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1); + if (wkst) { + iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); + fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1); + prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1); + while (prm_read_mod_reg(CORE_MOD, PM_WKST1)) + cpu_relax(); + cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1); + cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1); + } + wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3); + if (wkst) { + iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); + fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3); + cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3); + while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3)) + cpu_relax(); + cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3); + cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + } + + /* PER */ + wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); + fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN); + prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST); + while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN); + cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN); + } + + if (omap_rev() > OMAP3430_REV_ES1_0) { + /* USBHOST */ + wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD, + PM_WKST); + while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + } + } + + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + prm_write_mod_reg(irqstatus_mpu, OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)) + cpu_relax(); + + return IRQ_HANDLED; +} + +static void omap_sram_idle(void) +{ + /* Variable to tell what needs to be saved and restored + * in omap_sram_idle*/ + /* save_state = 0 => Nothing to save and restored */ + /* save_state = 1 => Only L1 and logic lost */ + /* save_state = 2 => Only L2 lost */ + /* save_state = 3 => L1, L2 and logic lost */ + int save_state = 0, mpu_next_state; + + if (!_omap_sram_idle) + return; + + mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); + switch (mpu_next_state) { + case PWRDM_POWER_RET: + /* No need to save context */ + save_state = 0; + break; + default: + /* Invalid state */ + printk(KERN_ERR "Invalid mpu state in sram_idle\n"); + return; + } + omap2_gpio_prepare_for_retention(); + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + omap_uart_prepare_idle(2); + + _omap_sram_idle(NULL, save_state); + cpu_init(); + + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + omap2_gpio_resume_after_retention(); +} + +/* + * Check if functional clocks are enabled before entering + * sleep. This function could be behind CONFIG_PM_DEBUG + * when all drivers are configuring their sysconfig registers + * properly and using their clocks properly. + */ +static int omap3_fclks_active(void) +{ + u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0, + fck_cam = 0, fck_per = 0, fck_usbhost = 0; + + fck_core1 = cm_read_mod_reg(CORE_MOD, + CM_FCLKEN1); + if (omap_rev() > OMAP3430_REV_ES1_0) { + fck_core3 = cm_read_mod_reg(CORE_MOD, + OMAP3430ES2_CM_FCLKEN3); + fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD, + CM_FCLKEN); + fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + } else + fck_sgx = cm_read_mod_reg(GFX_MOD, + OMAP3430ES2_CM_FCLKEN3); + fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD, + CM_FCLKEN); + fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD, + CM_FCLKEN); + fck_per = cm_read_mod_reg(OMAP3430_PER_MOD, + CM_FCLKEN); + + /* Ignore UART clocks. These are handled by UART core (serial.c) */ + fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2); + fck_per &= ~OMAP3430_EN_UART3; + + if (fck_core1 | fck_core3 | fck_sgx | fck_dss | + fck_cam | fck_per | fck_usbhost) + return 1; + return 0; +} + +static int omap3_can_sleep(void) +{ + if (!omap_uart_can_sleep()) + return 0; + if (omap3_fclks_active()) + return 0; + return 1; +} + +/* This sets pwrdm state (other than mpu & core. Currently only ON & + * RET are supported. Function is assuming that clkdm doesn't have + * hw_sup mode enabled. */ +static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +{ + u32 cur_state; + int sleep_switch = 0; + int ret = 0; + + if (pwrdm == NULL || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << state))) { + if (state == PWRDM_POWER_OFF) + return ret; + state--; + } + + cur_state = pwrdm_read_next_pwrst(pwrdm); + if (cur_state == state) + return ret; + + if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { + omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); + sleep_switch = 1; + pwrdm_wait_transition(pwrdm); + } + + ret = pwrdm_set_next_pwrst(pwrdm, state); + if (ret) { + printk(KERN_ERR "Unable to set state of powerdomain: %s\n", + pwrdm->name); + goto err; + } + + if (sleep_switch) { + omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); + pwrdm_wait_transition(pwrdm); + } + +err: + return ret; +} + +static void omap3_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + if (!omap3_can_sleep()) + goto out; + + if (omap_irq_pending()) + goto out; + + omap_sram_idle(); + +out: + local_fiq_enable(); + local_irq_enable(); +} + +static int omap3_pm_prepare(void) +{ + disable_hlt(); + return 0; +} + +static int omap3_pm_suspend(void) +{ + struct power_state *pwrst; + int state, ret = 0; + + /* Read current next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) + pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); + /* Set ones wanted by suspend */ + list_for_each_entry(pwrst, &pwrst_list, node) { + if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) + goto restore; + if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm)) + goto restore; + } + + omap_uart_prepare_suspend(); + omap_sram_idle(); + +restore: + /* Restore next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) { + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + state = pwrdm_read_prev_pwrst(pwrst->pwrdm); + if (state > pwrst->next_state) { + printk(KERN_INFO "Powerdomain (%s) didn't enter " + "target state %d\n", + pwrst->pwrdm->name, pwrst->next_state); + ret = -1; + } + } + if (ret) + printk(KERN_ERR "Could not enter target state in pm_suspend\n"); + else + printk(KERN_INFO "Successfully put all powerdomains " + "to target state\n"); + + return ret; +} + +static int omap3_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap3_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap3_pm_finish(void) +{ + enable_hlt(); +} + +static struct platform_suspend_ops omap_pm_ops = { + .prepare = omap3_pm_prepare, + .enter = omap3_pm_enter, + .finish = omap3_pm_finish, + .valid = suspend_valid_only_mem, +}; + + +/** + * omap3_iva_idle(): ensure IVA is in idle so it can be put into + * retention + * + * In cases where IVA2 is activated by bootcode, it may prevent + * full-chip retention or off-mode because it is not idle. This + * function forces the IVA2 into idle state so it can go + * into retention/off and thus allow full-chip retention/off. + * + **/ +static void __init omap3_iva_idle(void) +{ + /* ensure IVA2 clock is disabled */ + cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* if no clock activity, nothing else to do */ + if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) & + OMAP3430_CLKACTIVITY_IVA2_MASK)) + return; + + /* Reset IVA2 */ + prm_write_mod_reg(OMAP3430_RST1_IVA2 | + OMAP3430_RST2_IVA2 | + OMAP3430_RST3_IVA2, + OMAP3430_IVA2_MOD, RM_RSTCTRL); + + /* Enable IVA2 clock */ + cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2, + OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Set IVA2 boot mode to 'idle' */ + omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, + OMAP343X_CONTROL_IVA2_BOOTMOD); + + /* Un-reset IVA2 */ + prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL); + + /* Disable IVA2 clock */ + cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Reset IVA2 */ + prm_write_mod_reg(OMAP3430_RST1_IVA2 | + OMAP3430_RST2_IVA2 | + OMAP3430_RST3_IVA2, + OMAP3430_IVA2_MOD, RM_RSTCTRL); +} + +static void __init omap3_d2d_idle(void) +{ + u16 mask, padconf; + + /* In a stand alone OMAP3430 where there is not a stacked + * modem for the D2D Idle Ack and D2D MStandby must be pulled + * high. S CONTROL_PADCONF_SAD2D_IDLEACK and + * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */ + mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); + + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); + + /* reset modem */ + prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON | + OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST, + CORE_MOD, RM_RSTCTRL); + prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL); +} + +static void __init prcm_setup_regs(void) +{ + /* XXX Reset all wkdeps. This should be done when initializing + * powerdomains */ + prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); + prm_write_mod_reg(0, MPU_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP); + if (omap_rev() > OMAP3430_REV_ES1_0) { + prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP); + } else + prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); + + /* + * Enable interface clock autoidle for all modules. + * Note that in the long run this should be done by clockfw + */ + cm_write_mod_reg( + OMAP3430_AUTO_MODEM | + OMAP3430ES2_AUTO_MMC3 | + OMAP3430ES2_AUTO_ICR | + OMAP3430_AUTO_AES2 | + OMAP3430_AUTO_SHA12 | + OMAP3430_AUTO_DES2 | + OMAP3430_AUTO_MMC2 | + OMAP3430_AUTO_MMC1 | + OMAP3430_AUTO_MSPRO | + OMAP3430_AUTO_HDQ | + OMAP3430_AUTO_MCSPI4 | + OMAP3430_AUTO_MCSPI3 | + OMAP3430_AUTO_MCSPI2 | + OMAP3430_AUTO_MCSPI1 | + OMAP3430_AUTO_I2C3 | + OMAP3430_AUTO_I2C2 | + OMAP3430_AUTO_I2C1 | + OMAP3430_AUTO_UART2 | + OMAP3430_AUTO_UART1 | + OMAP3430_AUTO_GPT11 | + OMAP3430_AUTO_GPT10 | + OMAP3430_AUTO_MCBSP5 | + OMAP3430_AUTO_MCBSP1 | + OMAP3430ES1_AUTO_FAC | /* This is es1 only */ + OMAP3430_AUTO_MAILBOXES | + OMAP3430_AUTO_OMAPCTRL | + OMAP3430ES1_AUTO_FSHOSTUSB | + OMAP3430_AUTO_HSOTGUSB | + OMAP3430_AUTO_SAD2D | + OMAP3430_AUTO_SSI, + CORE_MOD, CM_AUTOIDLE1); + + cm_write_mod_reg( + OMAP3430_AUTO_PKA | + OMAP3430_AUTO_AES1 | + OMAP3430_AUTO_RNG | + OMAP3430_AUTO_SHA11 | + OMAP3430_AUTO_DES1, + CORE_MOD, CM_AUTOIDLE2); + + if (omap_rev() > OMAP3430_REV_ES1_0) { + cm_write_mod_reg( + OMAP3430_AUTO_MAD2D | + OMAP3430ES2_AUTO_USBTLL, + CORE_MOD, CM_AUTOIDLE3); + } + + cm_write_mod_reg( + OMAP3430_AUTO_WDT2 | + OMAP3430_AUTO_WDT1 | + OMAP3430_AUTO_GPIO1 | + OMAP3430_AUTO_32KSYNC | + OMAP3430_AUTO_GPT12 | + OMAP3430_AUTO_GPT1 , + WKUP_MOD, CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_DSS, + OMAP3430_DSS_MOD, + CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_CAM, + OMAP3430_CAM_MOD, + CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_GPIO6 | + OMAP3430_AUTO_GPIO5 | + OMAP3430_AUTO_GPIO4 | + OMAP3430_AUTO_GPIO3 | + OMAP3430_AUTO_GPIO2 | + OMAP3430_AUTO_WDT3 | + OMAP3430_AUTO_UART3 | + OMAP3430_AUTO_GPT9 | + OMAP3430_AUTO_GPT8 | + OMAP3430_AUTO_GPT7 | + OMAP3430_AUTO_GPT6 | + OMAP3430_AUTO_GPT5 | + OMAP3430_AUTO_GPT4 | + OMAP3430_AUTO_GPT3 | + OMAP3430_AUTO_GPT2 | + OMAP3430_AUTO_MCBSP4 | + OMAP3430_AUTO_MCBSP3 | + OMAP3430_AUTO_MCBSP2, + OMAP3430_PER_MOD, + CM_AUTOIDLE); + + if (omap_rev() > OMAP3430_REV_ES1_0) { + cm_write_mod_reg( + OMAP3430ES2_AUTO_USBHOST, + OMAP3430ES2_USBHOST_MOD, + CM_AUTOIDLE); + } + + /* + * Set all plls to autoidle. This is needed until autoidle is + * enabled by clockfw + */ + cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT, + OMAP3430_IVA2_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT, + MPU_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) | + (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT), + PLL_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT, + PLL_MOD, + CM_AUTOIDLE2); + + /* + * Enable control of expternal oscillator through + * sys_clkreq. In the long run clock framework should + * take care of this. + */ + prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, + 1 << OMAP_AUTOEXTCLKMODE_SHIFT, + OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + + /* setup wakup source */ + prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 | + OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12, + WKUP_MOD, PM_WKEN); + /* No need to write EN_IO, that is always enabled */ + prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 | + OMAP3430_EN_GPT12, + WKUP_MOD, OMAP3430_PM_MPUGRPSEL); + /* For some reason IO doesn't generate wakeup event even if + * it is selected to mpu wakeup goup */ + prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, + OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + omap3_iva_idle(); + omap3_d2d_idle(); +} + +static int __init pwrdms_setup(struct powerdomain *pwrdm) +{ + struct power_state *pwrst; + + if (!pwrdm->pwrsts) + return 0; + + pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL); + if (!pwrst) + return -ENOMEM; + pwrst->pwrdm = pwrdm; + pwrst->next_state = PWRDM_POWER_RET; + list_add(&pwrst->node, &pwrst_list); + + if (pwrdm_has_hdwr_sar(pwrdm)) + pwrdm_enable_hdwr_sar(pwrdm); + + return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); +} + +/* + * Enable hw supervised mode for all clockdomains if it's + * supported. Initiate sleep transition for other clockdomains, if + * they are not used + */ +static int __init clkdms_setup(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) + omap2_clkdm_allow_idle(clkdm); + else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && + atomic_read(&clkdm->usecount) == 0) + omap2_clkdm_sleep(clkdm); + return 0; +} + +int __init omap3_pm_init(void) +{ + struct power_state *pwrst, *tmp; + int ret; + + if (!cpu_is_omap34xx()) + return -ENODEV; + + printk(KERN_ERR "Power Management for TI OMAP3.\n"); + + /* XXX prcm_setup_regs needs to be before enabling hw + * supervised mode for powerdomains */ + prcm_setup_regs(); + + ret = request_irq(INT_34XX_PRCM_MPU_IRQ, + (irq_handler_t)prcm_interrupt_handler, + IRQF_DISABLED, "prcm", NULL); + if (ret) { + printk(KERN_ERR "request_irq failed to register for 0x%x\n", + INT_34XX_PRCM_MPU_IRQ); + goto err1; + } + + ret = pwrdm_for_each(pwrdms_setup); + if (ret) { + printk(KERN_ERR "Failed to setup powerdomains\n"); + goto err2; + } + + (void) clkdm_for_each(clkdms_setup); + + mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); + if (mpu_pwrdm == NULL) { + printk(KERN_ERR "Failed to get mpu_pwrdm\n"); + goto err2; + } + + _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, + omap34xx_cpu_suspend_sz); + + suspend_set_ops(&omap_pm_ops); + + pm_idle = omap3_pm_idle; + +err1: + return ret; +err2: + free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { + list_del(&pwrst->node); + kfree(pwrst); + } + return ret; +} + +late_initcall(omap3_pm_init); diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 812d50ee495d..cb1ae84e0925 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -276,6 +276,8 @@ /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP3430_EN_GPIO1 (1 << 3) #define OMAP3430_EN_GPIO1_SHIFT 3 +#define OMAP3430_EN_GPT12 (1 << 1) +#define OMAP3430_EN_GPT12_SHIFT 1 #define OMAP3430_EN_GPT1 (1 << 0) #define OMAP3430_EN_GPT1_SHIFT 0 diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 826d326b8062..9937e2814696 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -16,17 +16,12 @@ #include "prcm-common.h" -#ifndef __ASSEMBLER__ -#define OMAP_PRM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg)) -#else #define OMAP2420_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) #define OMAP2430_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) -#endif /* * Architecture-specific global PRM registers @@ -38,80 +33,132 @@ * */ -/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */ -#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050 -#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080 - -/* 242x GR_MOD registers, use these only for assembly code */ -#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_VOLTCTRL_OFFSET) -#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET) - -/* 243x GR_MOD registers, use these only for assembly code */ -#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_VOLTCTRL_OFFSET) -#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \ - OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET) - -/* These will disappear */ -#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000) -#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010) - -#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c) - -#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054) -#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060) -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070) -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0078) -#define OMAP24XX_PRCM_CLKCFG_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0080) -#define OMAP24XX_PRCM_CLKCFG_STATUS OMAP_PRM_REGADDR(OCP_MOD, 0x0084) -#define OMAP24XX_PRCM_VOLTSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0090) -#define OMAP24XX_PRCM_CLKSSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0094) -#define OMAP24XX_PRCM_POLCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0098) - -#define OMAP3430_PRM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0004) -#define OMAP3430_PRM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0014) - -#define OMAP3430_PRM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP3430_PRM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c) - - -#define OMAP3430_PRM_VC_SMPS_SA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) -#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) -#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) -#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) -#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) -#define OMAP3430_PRM_VC_CH_CONF OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) -#define OMAP3430_PRM_VC_I2C_CFG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) -#define OMAP3430_PRM_VC_BYPASS_VAL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) -#define OMAP3430_PRM_RSTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) -#define OMAP3430_PRM_RSTTIME OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) -#define OMAP3430_PRM_RSTST OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) -#define OMAP3430_PRM_VOLTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) -#define OMAP3430_PRM_SRAM_PCHARGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) -#define OMAP3430_PRM_CLKSRC_CTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) -#define OMAP3430_PRM_VOLTSETUP1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) -#define OMAP3430_PRM_VOLTOFFSET OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) -#define OMAP3430_PRM_CLKSETUP OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) -#define OMAP3430_PRM_POLCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) -#define OMAP3430_PRM_VOLTSETUP2 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) -#define OMAP3430_PRM_VP1_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) -#define OMAP3430_PRM_VP1_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) -#define OMAP3430_PRM_VP1_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) -#define OMAP3430_PRM_VP1_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) -#define OMAP3430_PRM_VP1_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) -#define OMAP3430_PRM_VP1_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) -#define OMAP3430_PRM_VP2_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) -#define OMAP3430_PRM_VP2_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) -#define OMAP3430_PRM_VP2_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) -#define OMAP3430_PRM_VP2_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) -#define OMAP3430_PRM_VP2_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) -#define OMAP3430_PRM_VP2_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) - -#define OMAP3430_PRM_CLKSEL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) -#define OMAP3430_PRM_CLKOUT_CTRL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) +#define OMAP2_PRCM_REVISION_OFFSET 0x0000 +#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 +#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 +#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2_PRCM_VOLTST_OFFSET 0x0054 +#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 +#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078 +#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080 +#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 +#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 +#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 +#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 +#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP3_PRM_REVISION_OFFSET 0x0004 +#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004) +#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014 +#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014) + +#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c) + + +#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020 +#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) +#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024 +#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) +#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028 +#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) +#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c +#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) +#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030 +#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) +#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034 +#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) +#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038 +#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) +#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c +#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) +#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050 +#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) +#define OMAP3_PRM_RSTTIME_OFFSET 0x0054 +#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) +#define OMAP3_PRM_RSTST_OFFSET 0x0058 +#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) +#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060 +#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) +#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064 +#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) +#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) +#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090 +#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) +#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094 +#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) +#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098 +#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) +#define OMAP3_PRM_POLCTRL_OFFSET 0x009c +#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) +#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0 +#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) +#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0 +#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) +#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4 +#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) +#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8 +#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) +#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc +#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) +#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0 +#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) +#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4 +#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) +#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0 +#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) +#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4 +#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) +#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8 +#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) +#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc +#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) +#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0 +#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) +#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4 +#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) + +#define OMAP3_PRM_CLKSEL_OFFSET 0x0040 +#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) +#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) /* * Module specific PRM registers from PRM_BASE + domain offset @@ -156,9 +203,11 @@ #define OMAP3430_PM_MPUGRPSEL 0x00a4 #define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL +#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8 #define OMAP3430_PM_IVAGRPSEL 0x00a8 #define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL +#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4 #define OMAP3430_PM_PREPWSTST 0x00e8 diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h new file mode 100644 index 000000000000..02e1c2d4705f --- /dev/null +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -0,0 +1,55 @@ +/* + * SDRC register values for the Micron MT46H32M32LF-6 + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF +#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF + +#include <mach/sdrc.h> + +/* Micron MT46H32M32LF-6 */ +/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ +static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = { + [0] = { + .rate = 166000000, + .actim_ctrla = 0x9a9db4c6, + .actim_ctrlb = 0x00011217, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [1] = { + .rate = 165941176, + .actim_ctrla = 0x9a9db4c6, + .actim_ctrlb = 0x00011217, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 83000000, + .actim_ctrla = 0x51512283, + .actim_ctrlb = 0x0001120c, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [3] = { + .rate = 82970588, + .actim_ctrla = 0x51512283, + .actim_ctrlb = 0x0001120c, + .rfr_ctrl = 0x00025501, + .mr = 0x00000032, + }, + [4] = { + .rate = 0 + }, +}; + +#endif diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h new file mode 100644 index 000000000000..3751d293cb1f --- /dev/null +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -0,0 +1,54 @@ +/* + * SDRC register values for the Qimonda HYB18M512160AF-6 + * + * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 +#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 + +#include <mach/sdrc.h> + +/* Qimonda HYB18M512160AF-6 */ +static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { + [0] = { + .rate = 166000000, + .actim_ctrla = 0x629db4c6, + .actim_ctrlb = 0x00012214, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [1] = { + .rate = 165941176, + .actim_ctrla = 0x629db4c6, + .actim_ctrlb = 0x00012214, + .rfr_ctrl = 0x0004dc01, + .mr = 0x00000032, + }, + [2] = { + .rate = 83000000, + .actim_ctrla = 0x31512283, + .actim_ctrlb = 0x0001220a, + .rfr_ctrl = 0x00025501, + .mr = 0x00000022, + }, + [3] = { + .rate = 82970588, + .actim_ctrla = 0x31512283, + .actim_ctrlb = 0x0001220a, + .rfr_ctrl = 0x00025501, + .mr = 0x00000022, + }, + [4] = { + .rate = 0 + }, +}; + +#endif diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2a30060cb4b7..2045441e8385 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; +/* SDRC_POWER register bits */ +#define SDRC_POWER_EXTCLKDIS_SHIFT 3 +#define SDRC_POWER_PWDENA_SHIFT 2 +#define SDRC_POWER_PAGEPOLICY_SHIFT 0 /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate @@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) { struct omap_sdrc_params *sp; + if (!sdrc_init_params) + return NULL; + sp = sdrc_init_params; - while (sp->rate != r) + while (sp->rate && sp->rate != r) sp++; if (!sp->rate) @@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) omap2_sms_base = omap2_globals->sms; } -/* turn on smart idle modes for SDRAM scheduler and controller */ +/** + * omap2_sdrc_init - initialize SMS, SDRC devices on boot + * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * + * Turn on smart idle modes for SDRAM scheduler and controller. + * Program a known-good configuration for the SDRC to deal with buggy + * bootloaders. + */ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) { u32 l; @@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) sdrc_write_reg(l, SDRC_SYSCONFIG); sdrc_init_params = sp; + + /* XXX Enable SRFRONIDLEREQ here also? */ + l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | + (1 << SDRC_POWER_PWDENA_SHIFT) | + (1 << SDRC_POWER_PAGEPOLICY_SHIFT); + sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 0afdad5ae9fb..feaec7eaf6bd 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force) m_type = omap2xxx_sdrc_get_type(); local_irq_save(flags); - __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP); + if (cpu_is_omap2420()) + __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP); + else + __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP); omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); curr_perf_level = level; local_irq_restore(flags); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 4dcf39c285b9..b094c15bfe47 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -6,8 +6,13 @@ * Copyright (C) 2005-2008 Nokia Corporation * Author: Paul Mundt <paul.mundt@nokia.com> * + * Major rework for PM support by Kevin Hilman + * * Based off of arch/arm/mach-omap/omap1/serial.c * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com + * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -21,9 +26,50 @@ #include <mach/common.h> #include <mach/board.h> +#include <mach/clock.h> +#include <mach/control.h> + +#include "prm.h" +#include "pm.h" +#include "prm-regbits-34xx.h" + +#define UART_OMAP_WER 0x17 /* Wake-up enable register */ + +#define DEFAULT_TIMEOUT (5 * HZ) -static struct clk *uart_ick[OMAP_MAX_NR_PORTS]; -static struct clk *uart_fck[OMAP_MAX_NR_PORTS]; +struct omap_uart_state { + int num; + int can_sleep; + struct timer_list timer; + u32 timeout; + + void __iomem *wk_st; + void __iomem *wk_en; + u32 wk_mask; + u32 padconf; + + struct clk *ick; + struct clk *fck; + int clocked; + + struct plat_serial8250_port *p; + struct list_head node; + +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) + int context_valid; + + /* Registers to be saved/restored for OFF-mode */ + u16 dll; + u16 dlh; + u16 ier; + u16 sysc; + u16 scr; + u16 wer; +#endif +}; + +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; +static LIST_HEAD(uart_list); static struct plat_serial8250_port serial_platform_data[] = { { @@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, * properly. Note that the TX watermark initialization may not be needed * once the 8250.c watermark handling code is merged. */ -static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +static inline void __init omap_uart_reset(struct omap_uart_state *uart) { + struct plat_serial8250_port *p = uart->p; + serial_write_reg(p, UART_OMAP_MDR1, 0x07); serial_write_reg(p, UART_OMAP_SCR, 0x08); serial_write_reg(p, UART_OMAP_MDR1, 0x00); serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); } -void omap_serial_enable_clocks(int enable) +#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) + +static int enable_off_mode; /* to be removed by full off-mode patches */ + +static void omap_uart_save_context(struct omap_uart_state *uart) { - int i; - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - if (uart_ick[i] && uart_fck[i]) { - if (enable) { - clk_enable(uart_ick[i]); - clk_enable(uart_fck[i]); - } else { - clk_disable(uart_ick[i]); - clk_disable(uart_fck[i]); + u16 lcr = 0; + struct plat_serial8250_port *p = uart->p; + + if (!enable_off_mode) + return; + + lcr = serial_read_reg(p, UART_LCR); + serial_write_reg(p, UART_LCR, 0xBF); + uart->dll = serial_read_reg(p, UART_DLL); + uart->dlh = serial_read_reg(p, UART_DLM); + serial_write_reg(p, UART_LCR, lcr); + uart->ier = serial_read_reg(p, UART_IER); + uart->sysc = serial_read_reg(p, UART_OMAP_SYSC); + uart->scr = serial_read_reg(p, UART_OMAP_SCR); + uart->wer = serial_read_reg(p, UART_OMAP_WER); + + uart->context_valid = 1; +} + +static void omap_uart_restore_context(struct omap_uart_state *uart) +{ + u16 efr = 0; + struct plat_serial8250_port *p = uart->p; + + if (!enable_off_mode) + return; + + if (!uart->context_valid) + return; + + uart->context_valid = 0; + + serial_write_reg(p, UART_OMAP_MDR1, 0x7); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + efr = serial_read_reg(p, UART_EFR); + serial_write_reg(p, UART_EFR, UART_EFR_ECB); + serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(p, UART_IER, 0x0); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(p, UART_DLL, uart->dll); + serial_write_reg(p, UART_DLM, uart->dlh); + serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(p, UART_IER, uart->ier); + serial_write_reg(p, UART_FCR, 0xA1); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(p, UART_EFR, efr); + serial_write_reg(p, UART_LCR, UART_LCR_WLEN8); + serial_write_reg(p, UART_OMAP_SCR, uart->scr); + serial_write_reg(p, UART_OMAP_WER, uart->wer); + serial_write_reg(p, UART_OMAP_SYSC, uart->sysc); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ +} +#else +static inline void omap_uart_save_context(struct omap_uart_state *uart) {} +static inline void omap_uart_restore_context(struct omap_uart_state *uart) {} +#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */ + +static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) +{ + if (uart->clocked) + return; + + clk_enable(uart->ick); + clk_enable(uart->fck); + uart->clocked = 1; + omap_uart_restore_context(uart); +} + +#ifdef CONFIG_PM + +static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) +{ + if (!uart->clocked) + return; + + omap_uart_save_context(uart); + uart->clocked = 0; + clk_disable(uart->ick); + clk_disable(uart->fck); +} + +static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, + int enable) +{ + struct plat_serial8250_port *p = uart->p; + u16 sysc; + + sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7; + if (enable) + sysc |= 0x2 << 3; + else + sysc |= 0x1 << 3; + + serial_write_reg(p, UART_OMAP_SYSC, sysc); +} + +static void omap_uart_block_sleep(struct omap_uart_state *uart) +{ + omap_uart_enable_clocks(uart); + + omap_uart_smart_idle_enable(uart, 0); + uart->can_sleep = 0; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + del_timer(&uart->timer); +} + +static void omap_uart_allow_sleep(struct omap_uart_state *uart) +{ + if (!uart->clocked) + return; + + omap_uart_smart_idle_enable(uart, 1); + uart->can_sleep = 1; + del_timer(&uart->timer); +} + +static void omap_uart_idle_timer(unsigned long data) +{ + struct omap_uart_state *uart = (struct omap_uart_state *)data; + + omap_uart_allow_sleep(uart); +} + +void omap_uart_prepare_idle(int num) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (num == uart->num && uart->can_sleep) { + omap_uart_disable_clocks(uart); + return; + } + } +} + +void omap_uart_resume_idle(int num) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (num == uart->num) { + omap_uart_enable_clocks(uart); + + /* Check for IO pad wakeup */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 p = omap_ctrl_readw(uart->padconf); + + if (p & OMAP3_PADCONF_WAKEUPEVENT0) + omap_uart_block_sleep(uart); } + + /* Check for normal UART wakeup */ + if (__raw_readl(uart->wk_st) & uart->wk_mask) + omap_uart_block_sleep(uart); + + return; } } } +void omap_uart_prepare_suspend(void) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + omap_uart_allow_sleep(uart); + } +} + +int omap_uart_can_sleep(void) +{ + struct omap_uart_state *uart; + int can_sleep = 1; + + list_for_each_entry(uart, &uart_list, node) { + if (!uart->clocked) + continue; + + if (!uart->can_sleep) { + can_sleep = 0; + continue; + } + + /* This UART can now safely sleep. */ + omap_uart_allow_sleep(uart); + } + + return can_sleep; +} + +/** + * omap_uart_interrupt() + * + * This handler is used only to detect that *any* UART interrupt has + * occurred. It does _nothing_ to handle the interrupt. Rather, + * any UART interrupt will trigger the inactivity timer so the + * UART will not idle or sleep for its timeout period. + * + **/ +static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) +{ + struct omap_uart_state *uart = dev_id; + + omap_uart_block_sleep(uart); + + return IRQ_NONE; +} + +static u32 sleep_timeout = DEFAULT_TIMEOUT; + +static void omap_uart_idle_init(struct omap_uart_state *uart) +{ + u32 v; + struct plat_serial8250_port *p = uart->p; + int ret; + + uart->can_sleep = 0; + uart->timeout = sleep_timeout; + setup_timer(&uart->timer, omap_uart_idle_timer, + (unsigned long) uart); + mod_timer(&uart->timer, jiffies + uart->timeout); + omap_uart_smart_idle_enable(uart, 0); + + if (cpu_is_omap34xx()) { + u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD; + u32 wk_mask = 0; + u32 padconf = 0; + + uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1); + uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1); + switch (uart->num) { + case 0: + wk_mask = OMAP3430_ST_UART1_MASK; + padconf = 0x182; + break; + case 1: + wk_mask = OMAP3430_ST_UART2_MASK; + padconf = 0x17a; + break; + case 2: + wk_mask = OMAP3430_ST_UART3_MASK; + padconf = 0x19e; + break; + } + uart->wk_mask = wk_mask; + uart->padconf = padconf; + } else if (cpu_is_omap24xx()) { + u32 wk_mask = 0; + + if (cpu_is_omap2430()) { + uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1); + } else if (cpu_is_omap2420()) { + uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1); + } + switch (uart->num) { + case 0: + wk_mask = OMAP24XX_ST_UART1_MASK; + break; + case 1: + wk_mask = OMAP24XX_ST_UART2_MASK; + break; + case 2: + wk_mask = OMAP24XX_ST_UART3_MASK; + break; + } + uart->wk_mask = wk_mask; + } else { + uart->wk_en = 0; + uart->wk_st = 0; + uart->wk_mask = 0; + uart->padconf = 0; + } + + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v; + + v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } + + p->flags |= UPF_SHARE_IRQ; + ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, + "serial idle", (void *)uart); + WARN_ON(ret); +} + +static ssize_t sleep_timeout_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%u\n", sleep_timeout / HZ); +} + +static ssize_t sleep_timeout_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + struct omap_uart_state *uart; + unsigned int value; + + if (sscanf(buf, "%u", &value) != 1) { + printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); + return -EINVAL; + } + sleep_timeout = value * HZ; + list_for_each_entry(uart, &uart_list, node) { + uart->timeout = sleep_timeout; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + } + return n; +} + +static struct kobj_attribute sleep_timeout_attr = + __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); + +#else +static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#endif /* CONFIG_PM */ + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, +}; + void __init omap_serial_init(void) { - int i; + int i, err; const struct omap_uart_config *info; char name[16]; @@ -114,9 +496,14 @@ void __init omap_serial_init(void) if (info == NULL) return; + if (cpu_is_omap44xx()) { + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) + serial_platform_data[i].irq += 32; + } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { struct plat_serial8250_port *p = serial_platform_data + i; + struct omap_uart_state *uart = &omap_uart[i]; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -125,35 +512,39 @@ void __init omap_serial_init(void) } sprintf(name, "uart%d_ick", i+1); - uart_ick[i] = clk_get(NULL, name); - if (IS_ERR(uart_ick[i])) { + uart->ick = clk_get(NULL, name); + if (IS_ERR(uart->ick)) { printk(KERN_ERR "Could not get uart%d_ick\n", i+1); - uart_ick[i] = NULL; - } else - clk_enable(uart_ick[i]); + uart->ick = NULL; + } sprintf(name, "uart%d_fck", i+1); - uart_fck[i] = clk_get(NULL, name); - if (IS_ERR(uart_fck[i])) { + uart->fck = clk_get(NULL, name); + if (IS_ERR(uart->fck)) { printk(KERN_ERR "Could not get uart%d_fck\n", i+1); - uart_fck[i] = NULL; - } else - clk_enable(uart_fck[i]); + uart->fck = NULL; + } - omap_serial_reset(p); + if (!uart->ick || !uart->fck) + continue; + + uart->num = i; + p->private_data = uart; + uart->p = p; + list_add(&uart->node, &uart_list); + + omap_uart_enable_clocks(uart); + omap_uart_reset(uart); + omap_uart_idle_init(uart); } -} -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; + err = platform_device_register(&serial_device); + +#ifdef CONFIG_PM + if (!err) + err = sysfs_create_file(&serial_device.dev.kobj, + &sleep_timeout_attr.attr); +#endif -static int __init omap_init(void) -{ - return platform_device_register(&serial_device); } -arch_initcall(omap_init); + diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index bf9e96105e11..130aadbfa083 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -28,7 +28,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <mach/pm.h> #include <mach/omap24xx.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S new file mode 100644 index 000000000000..e5e2553e79a6 --- /dev/null +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -0,0 +1,436 @@ +/* + * linux/arch/arm/mach-omap2/sleep.S + * + * (C) Copyright 2007 + * Texas Instruments + * Karthik Dasu <karthik-dp@ti.com> + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/io.h> +#include <mach/control.h> + +#include "prm.h" +#include "sdrc.h" + +#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \ + OMAP3430_PM_PREPWSTST) +#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ + OMAP3430_PM_PREPWSTST) +#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL) +#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is + * available */ +#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\ + OMAP343X_CONTROL_MEM_WKUP +\ + SCRATCHPAD_MEM_OFFS) +#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) + + .text +/* Function call to get the restore pointer for resume from OFF */ +ENTRY(get_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore + ldmfd sp!, {pc} @ restore regs and return +ENTRY(get_restore_pointer_sz) + .word . - get_restore_pointer_sz +/* + * Forces OMAP into idle state + * + * omap34xx_suspend() - This bit of code just executes the WFI + * for normal idles. + * + * Note: This code get's copied to internal SRAM at boot. When the OMAP + * wakes up it continues execution at the point it went to sleep. + */ +ENTRY(omap34xx_cpu_suspend) + stmfd sp!, {r0-r12, lr} @ save registers on stack +loop: + /*b loop*/ @Enable to debug by stepping through code + /* r0 contains restore pointer in sdram */ + /* r1 contains information about saving context */ + ldr r4, sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + + cmp r1, #0x0 + /* If context save is required, do that and execute wfi */ + bne save_context_wfi + /* Data memory barrier and Data sync barrier */ + mov r1, #0 + mcr p15, 0, r1, c7, c10, 4 + mcr p15, 0, r1, c7, c10, 5 + + wfi @ wait for interrupt + + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl i_dll_wait + + ldmfd sp!, {r0-r12, pc} @ restore regs and return +restore: + /* b restore*/ @ Enable to debug restore code + /* Check what was the reason for mpu reset and store the reason in r9*/ + /* 1 - Only L1 and logic lost */ + /* 2 - Only L2 lost - In this case, we wont be here */ + /* 3 - Both L1 and L2 lost */ + ldr r1, pm_pwstctrl_mpu + ldr r2, [r1] + and r2, r2, #0x3 + cmp r2, #0x0 @ Check if target power state was OFF or RET + moveq r9, #0x3 @ MPU OFF => L1 and L2 lost + movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation + bne logic_l1_restore + /* Execute smi to invalidate L2 cache */ + mov r12, #0x1 @ set up to invalide L2 +smi: .word 0xE1600070 @ Call SMI monitor (smieq) +logic_l1_restore: + mov r1, #0 + /* Invalidate all instruction caches to PoU + * and flush branch target cache */ + mcr p15, 0, r1, c7, c5, 0 + + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldmia r3!, {r4-r6} + mov sp, r4 + msr spsr_cxsf, r5 + mov lr, r6 + + ldmia r3!, {r4-r9} + /* Coprocessor access Control Register */ + mcr p15, 0, r4, c1, c0, 2 + + /* TTBR0 */ + MCR p15, 0, r5, c2, c0, 0 + /* TTBR1 */ + MCR p15, 0, r6, c2, c0, 1 + /* Translation table base control register */ + MCR p15, 0, r7, c2, c0, 2 + /*domain access Control Register */ + MCR p15, 0, r8, c3, c0, 0 + /* data fault status Register */ + MCR p15, 0, r9, c5, c0, 0 + + ldmia r3!,{r4-r8} + /* instruction fault status Register */ + MCR p15, 0, r4, c5, c0, 1 + /*Data Auxiliary Fault Status Register */ + MCR p15, 0, r5, c5, c1, 0 + /*Instruction Auxiliary Fault Status Register*/ + MCR p15, 0, r6, c5, c1, 1 + /*Data Fault Address Register */ + MCR p15, 0, r7, c6, c0, 0 + /*Instruction Fault Address Register*/ + MCR p15, 0, r8, c6, c0, 2 + ldmia r3!,{r4-r7} + + /* user r/w thread and process ID */ + MCR p15, 0, r4, c13, c0, 2 + /* user ro thread and process ID */ + MCR p15, 0, r5, c13, c0, 3 + /*Privileged only thread and process ID */ + MCR p15, 0, r6, c13, c0, 4 + /* cache size selection */ + MCR p15, 2, r7, c0, c0, 0 + ldmia r3!,{r4-r8} + /* Data TLB lockdown registers */ + MCR p15, 0, r4, c10, c0, 0 + /* Instruction TLB lockdown registers */ + MCR p15, 0, r5, c10, c0, 1 + /* Secure or Nonsecure Vector Base Address */ + MCR p15, 0, r6, c12, c0, 0 + /* FCSE PID */ + MCR p15, 0, r7, c13, c0, 0 + /* Context PID */ + MCR p15, 0, r8, c13, c0, 1 + + ldmia r3!,{r4-r5} + /* primary memory remap register */ + MCR p15, 0, r4, c10, c2, 0 + /*normal memory remap register */ + MCR p15, 0, r5, c10, c2, 1 + + /* Restore cpsr */ + ldmia r3!,{r4} /*load CPSR from SDRAM*/ + msr cpsr, r4 /*store cpsr */ + + /* Enabling MMU here */ + mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */ + /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/ + and r7, #0x7 + cmp r7, #0x0 + beq usettbr0 +ttbr_error: + /* More work needs to be done to support N[0:2] value other than 0 + * So looping here so that the error can be detected + */ + b ttbr_error +usettbr0: + mrc p15, 0, r2, c2, c0, 0 + ldr r5, ttbrbit_mask + and r2, r5 + mov r4, pc + ldr r5, table_index_mask + and r4, r5 /* r4 = 31 to 20 bits of pc */ + /* Extract the value to be written to table entry */ + ldr r1, table_entry + add r1, r1, r4 /* r1 has value to be written to table entry*/ + /* Getting the address of table entry to modify */ + lsr r4, #18 + add r2, r4 /* r2 has the location which needs to be modified */ + /* Storing previous entry of location being modified */ + ldr r5, scratchpad_base + ldr r4, [r2] + str r4, [r5, #0xC0] + /* Modify the table entry */ + str r1, [r2] + /* Storing address of entry being modified + * - will be restored after enabling MMU */ + ldr r5, scratchpad_base + str r2, [r5, #0xC4] + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer + mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array + mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB + mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB + /* Restore control register but dont enable caches here*/ + /* Caches will be enabled after restoring MMU table entry */ + ldmia r3!, {r4} + /* Store previous value of control register in scratchpad */ + str r4, [r5, #0xC8] + ldr r2, cache_pred_disable_mask + and r4, r2 + mcr p15, 0, r4, c1, c0, 0 + + ldmfd sp!, {r0-r12, pc} @ restore regs and return +save_context_wfi: + /*b save_context_wfi*/ @ enable to debug save code + mov r8, r0 /* Store SDRAM address in r8 */ + /* Check what that target sleep state is:stored in r1*/ + /* 1 - Only L1 and logic lost */ + /* 2 - Only L2 lost */ + /* 3 - Both L1 and L2 lost */ + cmp r1, #0x2 /* Only L2 lost */ + beq clean_l2 + cmp r1, #0x1 /* L2 retained */ + /* r9 stores whether to clean L2 or not*/ + moveq r9, #0x0 /* Dont Clean L2 */ + movne r9, #0x1 /* Clean L2 */ +l1_logic_lost: + /* Store sp and spsr to SDRAM */ + mov r4, sp + mrs r5, spsr + mov r6, lr + stmia r8!, {r4-r6} + /* Save all ARM registers */ + /* Coprocessor access control register */ + mrc p15, 0, r6, c1, c0, 2 + stmia r8!, {r6} + /* TTBR0, TTBR1 and Translation table base control */ + mrc p15, 0, r4, c2, c0, 0 + mrc p15, 0, r5, c2, c0, 1 + mrc p15, 0, r6, c2, c0, 2 + stmia r8!, {r4-r6} + /* Domain access control register, data fault status register, + and instruction fault status register */ + mrc p15, 0, r4, c3, c0, 0 + mrc p15, 0, r5, c5, c0, 0 + mrc p15, 0, r6, c5, c0, 1 + stmia r8!, {r4-r6} + /* Data aux fault status register, instruction aux fault status, + datat fault address register and instruction fault address register*/ + mrc p15, 0, r4, c5, c1, 0 + mrc p15, 0, r5, c5, c1, 1 + mrc p15, 0, r6, c6, c0, 0 + mrc p15, 0, r7, c6, c0, 2 + stmia r8!, {r4-r7} + /* user r/w thread and process ID, user r/o thread and process ID, + priv only thread and process ID, cache size selection */ + mrc p15, 0, r4, c13, c0, 2 + mrc p15, 0, r5, c13, c0, 3 + mrc p15, 0, r6, c13, c0, 4 + mrc p15, 2, r7, c0, c0, 0 + stmia r8!, {r4-r7} + /* Data TLB lockdown, instruction TLB lockdown registers */ + mrc p15, 0, r5, c10, c0, 0 + mrc p15, 0, r6, c10, c0, 1 + stmia r8!, {r5-r6} + /* Secure or non secure vector base address, FCSE PID, Context PID*/ + mrc p15, 0, r4, c12, c0, 0 + mrc p15, 0, r5, c13, c0, 0 + mrc p15, 0, r6, c13, c0, 1 + stmia r8!, {r4-r6} + /* Primary remap, normal remap registers */ + mrc p15, 0, r4, c10, c2, 0 + mrc p15, 0, r5, c10, c2, 1 + stmia r8!,{r4-r5} + + /* Store current cpsr*/ + mrs r2, cpsr + stmia r8!, {r2} + + mrc p15, 0, r4, c1, c0, 0 + /* save control register */ + stmia r8!, {r4} +clean_caches: + /* Clean Data or unified cache to POU*/ + /* How to invalidate only L1 cache???? - #FIX_ME# */ + /* mcr p15, 0, r11, c7, c11, 1 */ + cmp r9, #1 /* Check whether L2 inval is required or not*/ + bne skip_l2_inval +clean_l2: + /* read clidr */ + mrc p15, 1, r0, c0, c0, 1 + /* extract loc from clidr */ + ands r3, r0, #0x7000000 + /* left align loc bit field */ + mov r3, r3, lsr #23 + /* if loc is 0, then no need to clean */ + beq finished + /* start clean at cache level 0 */ + mov r10, #0 +loop1: + /* work out 3x current cache level */ + add r2, r10, r10, lsr #1 + /* extract cache type bits from clidr*/ + mov r1, r0, lsr r2 + /* mask of the bits for current cache only */ + and r1, r1, #7 + /* see what cache we have at this level */ + cmp r1, #2 + /* skip if no cache, or just i-cache */ + blt skip + /* select current cache level in cssr */ + mcr p15, 2, r10, c0, c0, 0 + /* isb to sych the new cssr&csidr */ + isb + /* read the new csidr */ + mrc p15, 1, r1, c0, c0, 0 + /* extract the length of the cache lines */ + and r2, r1, #7 + /* add 4 (line length offset) */ + add r2, r2, #4 + ldr r4, assoc_mask + /* find maximum number on the way size */ + ands r4, r4, r1, lsr #3 + /* find bit position of way size increment */ + clz r5, r4 + ldr r7, numset_mask + /* extract max number of the index size*/ + ands r7, r7, r1, lsr #13 +loop2: + mov r9, r4 + /* create working copy of max way size*/ +loop3: + /* factor way and cache number into r11 */ + orr r11, r10, r9, lsl r5 + /* factor index number into r11 */ + orr r11, r11, r7, lsl r2 + /*clean & invalidate by set/way */ + mcr p15, 0, r11, c7, c10, 2 + /* decrement the way*/ + subs r9, r9, #1 + bge loop3 + /*decrement the index */ + subs r7, r7, #1 + bge loop2 +skip: + add r10, r10, #2 + /* increment cache number */ + cmp r3, r10 + bgt loop1 +finished: + /*swith back to cache level 0 */ + mov r10, #0 + /* select current cache level in cssr */ + mcr p15, 2, r10, c0, c0, 0 + isb +skip_l2_inval: + /* Data memory barrier and Data sync barrier */ + mov r1, #0 + mcr p15, 0, r1, c7, c10, 4 + mcr p15, 0, r1, c7, c10, 5 + + wfi @ wait for interrupt + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl i_dll_wait + /* restore regs and return */ + ldmfd sp!, {r0-r12, pc} + +i_dll_wait: + ldr r4, clk_stabilize_delay + +i_dll_delay: + subs r4, r4, #0x1 + bne i_dll_delay + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + bx lr +pm_prepwstst_core: + .word PM_PREPWSTST_CORE_V +pm_prepwstst_mpu: + .word PM_PREPWSTST_MPU_V +pm_pwstctrl_mpu: + .word PM_PWSTCTRL_MPU_P +scratchpad_base: + .word SCRATCHPAD_BASE_P +sdrc_power: + .word SDRC_POWER_V +context_mem: + .word 0x803E3E14 +clk_stabilize_delay: + .word 0x000001FF +assoc_mask: + .word 0x3ff +numset_mask: + .word 0x7fff +ttbrbit_mask: + .word 0xFFFFC000 +table_index_mask: + .word 0xFFF00000 +table_entry: + .word 0x00000C02 +cache_pred_disable_mask: + .word 0xFFFFE7FB +ENTRY(omap34xx_cpu_suspend_sz) + .word . - omap34xx_cpu_suspend diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index af4bd3490227..bb299851116d 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll: omap242x_sdi_sdrc_dlla_ctrl: .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) omap242x_sdi_prcm_voltctrl: - .word OMAP242X_PRCM_VOLTCTRL + .word OMAP2420_PRCM_VOLTCTRL prcm_mask_val: .word 0xFFFF3FFC omap242x_sdi_timer_32ksynct_cr: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_ddr_init_sz) .word . - omap242x_sram_ddr_init @@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl: omap242x_srs_sdrc_rfr_ctrl: .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0) omap242x_srs_prcm_voltctrl: - .word OMAP242X_PRCM_VOLTCTRL + .word OMAP2420_PRCM_VOLTCTRL ddr_prcm_mask_val: .word 0xFFFF3FFC omap242x_srs_timer_32ksynct: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_reprogram_sdrc_sz) .word . - omap242x_sram_reprogram_sdrc @@ -305,7 +305,7 @@ wait_dll_lock: ldmfd sp!, {r0-r12, pc} @ restore regs and return omap242x_ssp_set_config: - .word OMAP242X_PRCM_CLKCFG_CTRL + .word OMAP2420_PRCM_CLKCFG_CTRL omap242x_ssp_pll_ctl: .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN) omap242x_ssp_pll_stat: diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index 84363e269e8c..9955abcaeb31 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll: omap243x_sdi_sdrc_dlla_ctrl: .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL) omap243x_sdi_prcm_voltctrl: - .word OMAP243X_PRCM_VOLTCTRL + .word OMAP2430_PRCM_VOLTCTRL prcm_mask_val: .word 0xFFFF3FFC omap243x_sdi_timer_32ksynct_cr: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_ddr_init_sz) .word . - omap243x_sram_ddr_init @@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl: omap243x_srs_sdrc_rfr_ctrl: .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0) omap243x_srs_prcm_voltctrl: - .word OMAP243X_PRCM_VOLTCTRL + .word OMAP2430_PRCM_VOLTCTRL ddr_prcm_mask_val: .word 0xFFFF3FFC omap243x_srs_timer_32ksynct: - .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010) + .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_reprogram_sdrc_sz) .word . - omap243x_sram_reprogram_sdrc @@ -305,7 +305,7 @@ wait_dll_lock: ldmfd sp!, {r0-r12, pc} @ restore regs and return omap243x_ssp_set_config: - .word OMAP243X_PRCM_CLKCFG_CTRL + .word OMAP2430_PRCM_CLKCFG_CTRL omap243x_ssp_pll_ctl: .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN) omap243x_ssp_pll_stat: diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 2c7146136342..c080c82521e1 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -40,69 +40,74 @@ /* * Change frequency of core dpll * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 + * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for + * SDRC rates < 83MHz */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack + ldr r4, [sp, #52] @ pull extra args off the stack + dsb @ flush buffered writes to interconnect cmp r3, #0x2 blne configure_sdrc - cmp r3, #0x2 + cmp r4, #0x1 + bleq unlock_dll blne lock_dll - cmp r3, #0x1 - blne unlock_dll bl sdram_in_selfrefresh @ put the SDRAM in self refresh bl configure_core_dpll bl enable_sdrc - cmp r3, #0x1 - blne wait_dll_unlock - cmp r3, #0x2 + cmp r4, #0x1 + bleq wait_dll_unlock blne wait_dll_lock cmp r3, #0x1 blne configure_sdrc + isb @ prevent speculative exec past here mov r0, #0 @ return value ldmfd sp!, {r1-r12, pc} @ restore regs and return unlock_dll: - ldr r4, omap3_sdrc_dlla_ctrl - ldr r5, [r4] - orr r5, r5, #0x4 - str r5, [r4] + ldr r11, omap3_sdrc_dlla_ctrl + ldr r12, [r11] + orr r12, r12, #0x4 + str r12, [r11] @ (no OCP barrier needed) bx lr lock_dll: - ldr r4, omap3_sdrc_dlla_ctrl - ldr r5, [r4] - bic r5, r5, #0x4 - str r5, [r4] + ldr r11, omap3_sdrc_dlla_ctrl + ldr r12, [r11] + bic r12, r12, #0x4 + str r12, [r11] @ (no OCP barrier needed) bx lr sdram_in_selfrefresh: - mov r5, #0x0 @ Move 0 to R5 - mcr p15, 0, r5, c7, c10, 5 @ memory barrier - ldr r4, omap3_sdrc_power @ read the SDRC_POWER register - ldr r5, [r4] @ read the contents of SDRC_POWER - orr r5, r5, #0x40 @ enable self refresh on idle req - str r5, [r4] @ write back to SDRC_POWER register - ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg - ldr r5, [r4] - bic r5, r5, #0x2 @ disable iclk bit for SRDC - str r5, [r4] + ldr r11, omap3_sdrc_power @ read the SDRC_POWER register + ldr r12, [r11] @ read the contents of SDRC_POWER + mov r9, r12 @ keep a copy of SDRC_POWER bits + orr r12, r12, #0x40 @ enable self refresh on idle req + bic r12, r12, #0x4 @ clear PWDENA + str r12, [r11] @ write back to SDRC_POWER register + ldr r12, [r11] @ posted-write barrier for SDRC + ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg + ldr r12, [r11] + bic r12, r12, #0x2 @ disable iclk bit for SDRC + str r12, [r11] wait_sdrc_idle: - ldr r4, omap3_cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 @ check for SDRC idle - cmp r5, #2 + ldr r11, omap3_cm_idlest1_core + ldr r12, [r11] + and r12, r12, #0x2 @ check for SDRC idle + cmp r12, #2 bne wait_sdrc_idle bx lr configure_core_dpll: - ldr r4, omap3_cm_clksel1_pll - ldr r5, [r4] - ldr r6, core_m2_mask_val @ modify m2 for core dpll - and r5, r5, r6 - orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val - str r5, [r4] - mov r5, #0x800 @ wait for the clock to stabilise + ldr r11, omap3_cm_clksel1_pll + ldr r12, [r11] + ldr r10, core_m2_mask_val @ modify m2 for core dpll + and r12, r12, r10 + orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val + str r12, [r11] + ldr r12, [r11] @ posted-write barrier for CM + mov r12, #0x800 @ wait for the clock to stabilise cmp r3, #2 bne wait_clk_stable bx lr wait_clk_stable: - subs r5, r5, #1 + subs r12, r12, #1 bne wait_clk_stable nop nop @@ -116,42 +121,42 @@ wait_clk_stable: nop bx lr enable_sdrc: - ldr r4, omap3_cm_iclken1_core - ldr r5, [r4] - orr r5, r5, #0x2 @ enable iclk bit for SDRC - str r5, [r4] + ldr r11, omap3_cm_iclken1_core + ldr r12, [r11] + orr r12, r12, #0x2 @ enable iclk bit for SDRC + str r12, [r11] wait_sdrc_idle1: - ldr r4, omap3_cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 - cmp r5, #0 + ldr r11, omap3_cm_idlest1_core + ldr r12, [r11] + and r12, r12, #0x2 + cmp r12, #0 bne wait_sdrc_idle1 - ldr r4, omap3_sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] +restore_sdrc_power_val: + ldr r11, omap3_sdrc_power + str r9, [r11] @ restore SDRC_POWER, no barrier needed bx lr wait_dll_lock: - ldr r4, omap3_sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x4 + ldr r11, omap3_sdrc_dlla_status + ldr r12, [r11] + and r12, r12, #0x4 + cmp r12, #0x4 bne wait_dll_lock bx lr wait_dll_unlock: - ldr r4, omap3_sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x0 + ldr r11, omap3_sdrc_dlla_status + ldr r12, [r11] + and r12, r12, #0x4 + cmp r12, #0x0 bne wait_dll_unlock bx lr configure_sdrc: - ldr r4, omap3_sdrc_rfr_ctrl - str r0, [r4] - ldr r4, omap3_sdrc_actim_ctrla - str r1, [r4] - ldr r4, omap3_sdrc_actim_ctrlb - str r2, [r4] + ldr r11, omap3_sdrc_rfr_ctrl + str r0, [r11] + ldr r11, omap3_sdrc_actim_ctrla + str r1, [r11] + ldr r11, omap3_sdrc_actim_ctrlb + str r2, [r11] + ldr r2, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index f36aba12090e..97eeeebcb066 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -17,9 +17,10 @@ * * Some parts based off of TI's 24xx code: * - * Copyright (C) 2004 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Texas Instruments, Inc. * * Roughly modelled after the OMAP1 MPU timer code. + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -37,6 +38,7 @@ #include <asm/mach/time.h> #include <mach/dmtimer.h> +#include <asm/localtimer.h> /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 @@ -82,7 +84,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_PERIODIC: period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; period -= 1; - + if (cpu_is_omap44xx()) + period = 0xff; /* FIXME: */ omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period); break; case CLOCK_EVT_MODE_ONESHOT: @@ -145,6 +148,9 @@ static void __init omap2_gp_clockevent_init(void) "timer-gp: omap_dm_timer_set_source() failed\n"); tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + if (cpu_is_omap44xx()) + /* Assuming 32kHz clk is driving GPT1 */ + tick_rate = 32768; /* FIXME: */ pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", gptimer_id, tick_rate); @@ -224,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { +#ifdef CONFIG_LOCAL_TIMERS + twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); +#endif omap_dm_timer_init(); omap2_gp_clockevent_init(); diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c new file mode 100644 index 000000000000..c1a650a9910f --- /dev/null +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -0,0 +1,34 @@ +/* + * The MPU local timer source file. In OMAP4, both cortex-a9 cores have + * own timer in it's MPU domain. These timers will be driving the + * linux kernel SMP tick framework when active. These timers are not + * part of the wake up domain. + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This file is based on arm realview smp platform file. + * Copyright (C) 2002 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clockchips.h> +#include <asm/irq.h> +#include <asm/smp_twd.h> +#include <asm/localtimer.h> + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = INT_44XX_LOCALTIMER_IRQ; + twd_timer_setup(evt); +} + diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 34a56a136efd..d85296dc896c 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,10 +28,20 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/pm.h> #include <mach/mux.h> #include <mach/usb.h> +#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404) + +static void __init usb_musb_pm_init(void) +{ + /* Ensure force-idle mode for OTG controller */ + if (cpu_is_omap34xx()) + omap_writel(0, OTG_SYSCONFIG); +} + +#ifdef CONFIG_USB_MUSB_SOC + static struct resource musb_resources[] = { [0] = { /* start and end set dynamically */ .flags = IORESOURCE_MEM, @@ -184,4 +194,13 @@ void __init usb_musb_init(void) printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); return; } + + usb_musb_pm_init(); +} + +#else +void __init usb_musb_init(void) +{ + usb_musb_pm_init(); } +#endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index c14d12137276..6f3f77d031d0 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> +#include <linux/errno.h> #include <mach/hardware.h> #include "common.h" @@ -44,6 +45,7 @@ #define TARGET_DEV_BUS 1 #define TARGET_PCI 3 #define TARGET_PCIE 4 +#define TARGET_SRAM 9 #define ATTR_PCIE_MEM 0x59 #define ATTR_PCIE_IO 0x51 #define ATTR_PCIE_WA 0x79 @@ -53,6 +55,7 @@ #define ATTR_DEV_CS1 0x1d #define ATTR_DEV_CS2 0x1b #define ATTR_DEV_BOOT 0xf +#define ATTR_SRAM 0x0 /* * Helpers to get DDR bank info @@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win) return 0; } -static void __init setup_cpu_win(int win, u32 base, u32 size, +static int __init setup_cpu_win(int win, u32 base, u32 size, u8 target, u8 attr, int remap) { if (win >= 8) { printk(KERN_ERR "setup_cpu_win: trying to allocate " "window %d\n", win); - return; + return -ENOSPC; } writel(base & 0xffff0000, CPU_WIN_BASE(win)); @@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size, writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win)); writel(0, CPU_WIN_REMAP_HI(win)); } + return 0; } void __init orion5x_setup_cpu_mbus_bridge(void) @@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) setup_cpu_win(win_alloc_count++, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); } + +int __init orion5x_setup_sram_win(void) +{ + return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE, + ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1); +} diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b1c7778d9f96..eafcc49009ea 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -31,7 +31,7 @@ #include <plat/ehci-orion.h> #include <plat/mv_xor.h> #include <plat/orion_nand.h> -#include <plat/orion5x_wdt.h> +#include <plat/orion_wdt.h> #include <plat/time.h> #include "common.h" @@ -536,16 +536,52 @@ void __init orion5x_xor_init(void) platform_device_register(&orion5x_xor1_channel); } +static struct resource orion5x_crypto_res[] = { + { + .name = "regs", + .start = ORION5X_CRYPTO_PHYS_BASE, + .end = ORION5X_CRYPTO_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .name = "sram", + .start = ORION5X_SRAM_PHYS_BASE, + .end = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "crypto interrupt", + .start = IRQ_ORION5X_CESA, + .end = IRQ_ORION5X_CESA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion5x_crypto_device = { + .name = "mv_crypto", + .id = -1, + .num_resources = ARRAY_SIZE(orion5x_crypto_res), + .resource = orion5x_crypto_res, +}; + +int __init orion5x_crypto_init(void) +{ + int ret; + + ret = orion5x_setup_sram_win(); + if (ret) + return ret; + + return platform_device_register(&orion5x_crypto_device); +} /***************************************************************************** * Watchdog ****************************************************************************/ -static struct orion5x_wdt_platform_data orion5x_wdt_data = { +static struct orion_wdt_platform_data orion5x_wdt_data = { .tclk = 0, }; static struct platform_device orion5x_wdt_device = { - .name = "orion5x_wdt", + .name = "orion_wdt", .id = -1, .dev = { .platform_data = &orion5x_wdt_data, diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 798b9a5e3da9..de483e83edd7 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size); void orion5x_setup_dev1_win(u32 base, u32 size); void orion5x_setup_dev2_win(u32 base, u32 size); void orion5x_setup_pcie_wa_win(u32 base, u32 size); +int orion5x_setup_sram_win(void); void orion5x_ehci0_init(void); void orion5x_ehci1_init(void); @@ -37,6 +38,7 @@ void orion5x_spi_init(void); void orion5x_uart0_init(void); void orion5x_uart1_init(void); void orion5x_xor_init(void); +int orion5x_crypto_init(void); /* * PCIe/PCI functions. diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index be896e59d3e7..5c9744cd8ef6 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -17,8 +17,8 @@ #define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) -#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) -#define WDT_RESET 0x0002 +#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define WDT_RESET_OUT_EN 0x0002 #define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 377a773ae53f..2d8766570531 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -24,6 +24,7 @@ * f1000000 on-chip peripheral registers * f2000000 PCIe I/O space * f2100000 PCI I/O space + * f2200000 SRAM dedicated for the crypto unit * f4000000 device bus mappings (boot) * fa000000 device bus mappings (cs0) * fa800000 device bus mappings (cs2) @@ -49,6 +50,9 @@ #define ORION5X_PCI_IO_BUS_BASE 0x00100000 #define ORION5X_PCI_IO_SIZE SZ_1M +#define ORION5X_SRAM_PHYS_BASE (0xf2200000) +#define ORION5X_SRAM_SIZE SZ_8K + /* Relevant only for Orion-1/Orion-NAS */ #define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 #define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 @@ -94,6 +98,8 @@ #define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) #define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000) + #define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) #define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index e912490fff23..60e734c10458 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd) /* * Enable and issue soft reset */ - orion5x_setbits(CPU_RESET_MASK, (1 << 2)); + orion5x_setbits(RSTOUTn_MASK, (1 << 2)); orion5x_setbits(CPU_SOFT_RESET, 1); } diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index e23a3f91d6c6..bc4c3b9aaf83 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL); u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL); + /* Initialize gpiolib. */ + orion_gpio_init(); + while (mode->mpp >= 0) { u32 *reg; int num_type; diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 41e6d5033d54..61c086b66723 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -181,9 +181,9 @@ static void mss2_power_off(void) /* * Enable and issue soft reset */ - reg = readl(CPU_RESET_MASK); + reg = readl(RSTOUTn_MASK); reg |= 1 << 2; - writel(reg, CPU_RESET_MASK); + writel(reg, RSTOUTn_MASK); reg = readl(CPU_SOFT_RESET); reg |= 1; diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h index 0f9cdf458952..37b3d4875291 100644 --- a/arch/arm/mach-orion5x/ts78xx-fpga.h +++ b/arch/arm/mach-orion5x/ts78xx-fpga.h @@ -25,6 +25,7 @@ struct fpga_devices { /* Technologic Systems */ struct fpga_device ts_rtc; struct fpga_device ts_nand; + struct fpga_device ts_rng; }; struct ts78xx_fpga_data { diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 9a6b397f972d..5041d1bc26b1 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -17,6 +17,7 @@ #include <linux/m48t86.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/timeriomem-rng.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -270,12 +271,57 @@ static void ts78xx_ts_nand_unload(void) } /***************************************************************************** + * HW RNG + ****************************************************************************/ +#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044) + +static struct resource ts78xx_ts_rng_resource = { + .flags = IORESOURCE_MEM, + .start = TS_RNG_DATA, + .end = TS_RNG_DATA + 4 - 1, +}; + +static struct timeriomem_rng_data ts78xx_ts_rng_data = { + .period = 1000000, /* one second */ +}; + +static struct platform_device ts78xx_ts_rng_device = { + .name = "timeriomem_rng", + .id = -1, + .dev = { + .platform_data = &ts78xx_ts_rng_data, + }, + .resource = &ts78xx_ts_rng_resource, + .num_resources = 1, +}; + +static int ts78xx_ts_rng_load(void) +{ + int rc; + + if (ts78xx_fpga.supports.ts_rng.init == 0) { + rc = platform_device_register(&ts78xx_ts_rng_device); + if (!rc) + ts78xx_fpga.supports.ts_rng.init = 1; + } else + rc = platform_device_add(&ts78xx_ts_rng_device); + + return rc; +}; + +static void ts78xx_ts_rng_unload(void) +{ + platform_device_del(&ts78xx_ts_rng_device); +} + +/***************************************************************************** * FPGA 'hotplug' support code ****************************************************************************/ static void ts78xx_fpga_devices_zero_init(void) { ts78xx_fpga.supports.ts_rtc.init = 0; ts78xx_fpga.supports.ts_nand.init = 0; + ts78xx_fpga.supports.ts_rng.init = 0; } static void ts78xx_fpga_supports(void) @@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void) case TS7800_REV_5: ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; + ts78xx_fpga.supports.ts_rng.present = 1; break; default: ts78xx_fpga.supports.ts_rtc.present = 0; ts78xx_fpga.supports.ts_nand.present = 0; + ts78xx_fpga.supports.ts_rng.present = 0; } } @@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void) } ret |= tmp; } + if (ts78xx_fpga.supports.ts_rng.present == 1) { + tmp = ts78xx_ts_rng_load(); + if (tmp) { + printk(KERN_INFO "TS-78xx: RNG not registered\n"); + ts78xx_fpga.supports.ts_rng.present = 0; + } + ret |= tmp; + } return ret; } @@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void) ts78xx_ts_rtc_unload(); if (ts78xx_fpga.supports.ts_nand.present == 1) ts78xx_ts_nand_unload(); + if (ts78xx_fpga.supports.ts_rng.present == 1) + ts78xx_ts_rng_unload(); return ret; } diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 7ddc22c2bb54..69208217b220 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -15,6 +15,7 @@ #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <net/dsa.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/mach/arch.h> @@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = { .duplex = DUPLEX_FULL, }; +static struct dsa_chip_data wnr854t_switch_chip_data = { + .port_names[0] = "lan3", + .port_names[1] = "lan4", + .port_names[2] = "wan", + .port_names[3] = "cpu", + .port_names[5] = "lan1", + .port_names[7] = "lan2", +}; + +static struct dsa_platform_data wnr854t_switch_plat_data = { + .nr_chips = 1, + .chip = &wnr854t_switch_chip_data, +}; + static void __init wnr854t_init(void) { /* @@ -110,6 +125,7 @@ static void __init wnr854t_init(void) * Configure peripherals. */ orion5x_eth_init(&wnr854t_eth_data); + orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); orion5x_uart0_init(); orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 17d3fbd368a3..f4533f8ff4e8 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -51,6 +51,12 @@ config MACH_INTELMOTE2 select IWMMXT select PXA_HAVE_BOARD_IRQS +config MACH_STARGATE2 + bool "Intel Stargate 2 Platform" + select PXA27x + select IWMMXT + select PXA_HAVE_BOARD_IRQS + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x @@ -88,6 +94,10 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. +config SHARPSL_PM + bool + select APM_EMULATION + config CORGI_SSP_DEPRECATED bool select PXA_SSP @@ -280,6 +290,7 @@ config MACH_ZYLONITE select PXA3xx select PXA_SSP select HAVE_PWM + select PXA_HAVE_BOARD_IRQS config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" @@ -308,6 +319,14 @@ config MACH_CM_X300 select PXA3xx select CPU_PXA300 +config MACH_H4700 + bool "HP iPAQ hx4700" + select PXA27x + select IWMMXT + select PXA_SSP + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x @@ -505,12 +524,6 @@ config PXA_SSP help Enable support for PXA2xx SSP ports -config PXA_PWM - tristate - default BACKLIGHT_PWM - help - Enable support for PXA2xx/PXA3xx PWM controllers - config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 682dbf4e14b0..d18ffef44b8c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -15,7 +15,6 @@ endif # Generic drivers that other drivers may depend upon obj-$(CONFIG_PXA_SSP) += ssp.o -obj-$(CONFIG_PXA_PWM) += pwm.o # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o @@ -47,6 +46,7 @@ obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o +obj-$(CONFIG_MACH_H4700) += hx4700.o obj-$(CONFIG_MACH_MAGICIAN) += magician.o obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o @@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300) += cm-x300.o obj-$(CONFIG_PXA_EZX) += ezx.o obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o +obj-$(CONFIG_MACH_STARGATE2) += stargate2.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index db52d2c4791d..49ae38292310 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -86,20 +86,3 @@ void clks_register(struct clk_lookup *clks, size_t num) for (i = 0; i < num; i++) clkdev_add(&clks[i]); } - -int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, - struct device *dev) -{ - struct clk *r = clk_get(dev, id); - struct clk_lookup *l; - - if (!r) - return -ENODEV; - - l = clkdev_alloc(r, alias, alias_dev_name); - clk_put(r); - if (!l) - return -ENODEV; - clkdev_add(l); - return 0; -} diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 34576ba5f5fd..1d2cec25391d 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -335,6 +335,10 @@ void __init cmx270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config)); +#ifdef CONFIG_PM + pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); +#endif + cmx270_init_rtc(); cmx270_init_mmc(); cmx270_init_ohci(); diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index a9f48b1cb54a..465da26591bd 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -21,18 +21,20 @@ #include <linux/gpio.h> #include <linux/dm9000.h> #include <linux/leds.h> +#include <linux/rtc-v3020.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/setup.h> #include <mach/pxa300.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/pxa3xx_nand.h> #include <asm/mach/map.h> @@ -46,6 +48,11 @@ #define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ) +#define GPIO95_RTC_CS (95) +#define GPIO96_RTC_WR (96) +#define GPIO97_RTC_RD (97) +#define GPIO98_RTC_IO (98) + static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { /* LCD */ GPIO54_LCD_LDD_0, @@ -135,6 +142,12 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { GPIO85_GPIO, /* MMC WP */ GPIO99_GPIO, /* Ethernet IRQ */ + /* RTC GPIOs */ + GPIO95_GPIO, /* RTC CS */ + GPIO96_GPIO, /* RTC WR */ + GPIO97_GPIO, /* RTC RD */ + GPIO98_GPIO, /* RTC IO */ + /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, @@ -265,6 +278,7 @@ static struct mtd_partition cm_x300_nand_partitions[] = { static struct pxa3xx_nand_platform_data cm_x300_nand_info = { .enable_arbiter = 1, + .keep_config = 1, .parts = cm_x300_nand_partitions, .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions), }; @@ -441,6 +455,31 @@ static void __init cm_x300_init_i2c(void) static inline void cm_x300_init_i2c(void) {} #endif +#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) +struct v3020_platform_data cm_x300_v3020_pdata = { + .use_gpio = 1, + .gpio_cs = GPIO95_RTC_CS, + .gpio_wr = GPIO96_RTC_WR, + .gpio_rd = GPIO97_RTC_RD, + .gpio_io = GPIO98_RTC_IO, +}; + +static struct platform_device cm_x300_rtc_device = { + .name = "v3020", + .id = -1, + .dev = { + .platform_data = &cm_x300_v3020_pdata, + } +}; + +static void __init cm_x300_init_rtc(void) +{ + platform_device_register(&cm_x300_rtc_device); +} +#else +static inline void cm_x300_init_rtc(void) {} +#endif + static void __init cm_x300_init(void) { /* board-processor specific GPIO initialization */ @@ -453,6 +492,19 @@ static void __init cm_x300_init(void) cm_x300_init_nand(); cm_x300_init_leds(); cm_x300_init_i2c(); + cm_x300_init_rtc(); +} + +static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + mi->nr_banks = 2; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); + mi->bank[1].start = 0xc0000000; + mi->bank[1].node = 0; + mi->bank[1].size = (64*1024*1024); } MACHINE_START(CM_X300, "CM-X300 module") @@ -463,4 +515,5 @@ MACHINE_START(CM_X300, "CM-X300 module") .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, .init_machine = cm_x300_init, + .fixup = cm_x300_fixup, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 930e364ccde9..962dda2e154a 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -42,7 +42,7 @@ #include <asm/mach/irq.h> #include <mach/pxa25x.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/udc.h> @@ -445,13 +445,8 @@ static struct ads7846_platform_data corgi_ads7846_info = { .wait_for_sync = corgi_wait_for_hsync, }; -static void corgi_ads7846_cs(u32 command) -{ - gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip corgi_ads7846_chip = { - .cs_control = corgi_ads7846_cs, + .gpio_cs = CORGI_GPIO_ADS7846_CS, }; static void corgi_bl_kick_battery(void) @@ -475,22 +470,12 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = { .kick_battery = corgi_bl_kick_battery, }; -static void corgi_lcdcon_cs(u32 command) -{ - gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip corgi_lcdcon_chip = { - .cs_control = corgi_lcdcon_cs, + .gpio_cs = CORGI_GPIO_LCDCON_CS, }; -static void corgi_max1111_cs(u32 command) -{ - gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip corgi_max1111_chip = { - .cs_control = corgi_max1111_cs, + .gpio_cs = CORGI_GPIO_MAX1111_CS, }; static struct spi_board_info corgi_spi_devices[] = { @@ -520,32 +505,8 @@ static struct spi_board_info corgi_spi_devices[] = { static void __init corgi_init_spi(void) { - int err; - - err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS"); - if (err) - return; - - err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS"); - if (err) - goto err_free_1; - - err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS"); - if (err) - goto err_free_2; - - gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1); - gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1); - gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1); - pxa2xx_set_spi_info(1, &corgi_spi_info); spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices)); - return; - -err_free_2: - gpio_free(CORGI_GPIO_LCDCON_CS); -err_free_1: - gpio_free(CORGI_GPIO_ADS7846_CS); } #else static inline void corgi_init_spi(void) {} diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 7f04b3a761d1..a093282fe4db 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -41,7 +41,6 @@ static void corgi_charger_init(void) pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); - sharpsl_pm_pxa_init(); } static void corgi_measure_temp(int on) @@ -191,7 +190,7 @@ unsigned long corgipm_read_devdata(int type) static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .init = corgi_charger_init, - .exit = sharpsl_pm_pxa_remove, + .exit = NULL, .gpio_batlock = CORGI_GPIO_BAT_COVER, .gpio_acin = CORGI_GPIO_AC_IN, .gpio_batfull = CORGI_GPIO_CHRG_FULL, diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 083a1d851d49..3a8ee2272add 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -36,6 +36,8 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> #include <mach/pxa2xx-regs.h> @@ -47,6 +49,8 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); #define freq_debug 0 #endif +static struct regulator *vcc_core; + static unsigned int pxa27x_maxfreq; module_param(pxa27x_maxfreq, uint, 0); MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" @@ -58,6 +62,8 @@ typedef struct { unsigned int cccr; unsigned int div2; unsigned int cclkcfg; + int vmin; + int vmax; } pxa_freqs_t; /* Define the refresh period in mSec for the SDRAM and the number of rows */ @@ -82,24 +88,24 @@ static unsigned int sdram_rows; static pxa_freqs_t pxa255_run_freqs[] = { - /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */ - {132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */ - {199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */ - {265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */ - {331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */ - {398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */ + /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ + { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ + {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */ + {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */ + {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */ + {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */ + {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */ }; /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ static pxa_freqs_t pxa255_turbo_freqs[] = { /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */ - {199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */ - {298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */ - {298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */ - {398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */ + { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ + {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */ + {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */ + {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */ + {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */ }; #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) @@ -148,13 +154,13 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table ((T) ? CCLKCFG_TURBO : 0)) static pxa_freqs_t pxa27x_freqs[] = { - {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)}, - {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)}, - {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)}, - {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)}, - {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)}, - {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)}, - {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)} + {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 }, + {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 }, + {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 }, + {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 }, + {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 }, + {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 }, + {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 } }; #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) @@ -163,6 +169,47 @@ static struct cpufreq_frequency_table extern unsigned get_clk_frequency_khz(int info); +#ifdef CONFIG_REGULATOR + +static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) +{ + int ret = 0; + int vmin, vmax; + + if (!cpu_is_pxa27x()) + return 0; + + vmin = pxa_freq->vmin; + vmax = pxa_freq->vmax; + if ((vmin == -1) || (vmax == -1)) + return 0; + + ret = regulator_set_voltage(vcc_core, vmin, vmax); + if (ret) + pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n", + vmin, vmax); + return ret; +} + +static __init void pxa_cpufreq_init_voltages(void) +{ + vcc_core = regulator_get(NULL, "vcc_core"); + if (IS_ERR(vcc_core)) { + pr_info("cpufreq: Didn't find vcc_core regulator\n"); + vcc_core = NULL; + } else { + pr_info("cpufreq: Found vcc_core regulator\n"); + } +} +#else +static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) +{ + return 0; +} + +static __init void pxa_cpufreq_init_voltages(void) { } +#endif + static void find_freq_tables(struct cpufreq_frequency_table **freq_table, pxa_freqs_t **pxa_freqs) { @@ -251,6 +298,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned long flags; unsigned int new_freq_cpu, new_freq_mem; unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; + int ret = 0; /* Get the current policy */ find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); @@ -273,6 +321,10 @@ static int pxa_set_target(struct cpufreq_policy *policy, freqs.new / 1000, (pxa_freq_settings[idx].div2) ? (new_freq_mem / 2000) : (new_freq_mem / 1000)); + if (vcc_core && freqs.new > freqs.old) + ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); + if (ret) + return ret; /* * Tell everyone what we're about to do... * you should add a notify client with any platform specific @@ -335,6 +387,18 @@ static int pxa_set_target(struct cpufreq_policy *policy, */ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + /* + * Even if voltage setting fails, we don't report it, as the frequency + * change succeeded. The voltage reduction is not a critical failure, + * only power savings will suffer from this. + * + * Note: if the voltage change fails, and a return value is returned, a + * bug is triggered (seems a deadlock). Should anybody find out where, + * the "return 0" should become a "return ret". + */ + if (vcc_core && freqs.new < freqs.old) + ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); + return 0; } @@ -349,6 +413,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) if (cpu_is_pxa27x()) pxa27x_guess_max_freq(); + pxa_cpufreq_init_voltages(); + init_sdram_rows(); /* set default policy and cpuinfo */ diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 2b289f83a61a..7d3e1b46e550 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -16,15 +16,17 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> #include <linux/sm501.h> +#include <linux/smsc911x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/csb726.h> #include <mach/mfp-pxa27x.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pxa2xx-regs.h> +#include <mach/audio.h> #include "generic.h" #include "devices.h" @@ -275,15 +277,26 @@ static struct resource csb726_lan_resources[] = { { .start = CSB726_IRQ_LAN, .end = CSB726_IRQ_LAN, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; +struct smsc911x_platform_config csb726_lan_config = { + .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + + static struct platform_device csb726_lan = { - .name = "smc911x", + .name = "smsc911x", .id = -1, .num_resources = ARRAY_SIZE(csb726_lan_resources), .resource = csb726_lan_resources, + .dev = { + .platform_data = &csb726_lan_config, + }, }; static struct platform_device *devices[] __initdata = { @@ -303,6 +316,7 @@ static void __init csb726_init(void) pxa27x_set_i2c_power_info(NULL); pxa_set_mci_info(&csb726_mci); pxa_set_ohci_info(&csb726_ohci_platform_data); + pxa_set_ac97_info(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 29970f703f3c..ecc08f360b68 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -8,7 +8,7 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/irda.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/ohci.h> #include <mach/pxa27x_keypad.h> #include <mach/pxa2xx_spi.h> @@ -290,7 +290,7 @@ static struct resource pxa3xx_resources_i2c_power[] = { }; struct platform_device pxa3xx_device_i2c_power = { - .name = "pxa2xx-i2c", + .name = "pxa3xx-pwri2c", .id = 1, .resource = pxa3xx_resources_i2c_power, .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power), diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index bc0f73fbd4ca..243e0802b5f4 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -28,6 +28,8 @@ #include <linux/spi/libertas_spi.h> #include <linux/power_supply.h> #include <linux/apm-emulation.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> #include <media/soc_camera.h> @@ -41,7 +43,7 @@ #include <mach/ohci.h> #include <mach/mmc.h> #include <mach/pxa27x_keypad.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/camera.h> #include <mach/pxa2xx_spi.h> @@ -52,23 +54,31 @@ #define GPIO13_MMC_CD (13) #define GPIO95_MMC_WP (95) #define GPIO56_NAND_RB (56) +#define GPIO93_CAM_RESET (93) +#define GPIO16_USB_HUB_RESET (16) /* eXeda specific GPIOs */ #define GPIO114_MMC_CD (114) #define GPIO20_NAND_RB (20) #define GPIO38_SD_PWEN (38) +#define GPIO37_WLAN_RST (37) +#define GPIO95_TOUCHPAD_INT (95) +#define GPIO130_CAM_RESET (130) +#define GPIO10_USB_HUB_RESET (10) /* common GPIOs */ #define GPIO11_NAND_CS (11) -#define GPIO93_CAM_RESET (93) #define GPIO41_ETHIRQ (41) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) #define GPIO115_WLAN_PWEN (115) #define GPIO19_WLAN_STRAP (19) +#define GPIO9_USB_VBUS_EN (9) static int mmc_cd; static int nand_rb; static int dm9000_flags; +static int cam_reset; +static int usb_hub_reset; static unsigned long common_pin_config[] = { /* AC'97 */ @@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = { /* power controls */ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ - GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ /* NAND controls */ @@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = { }; static unsigned long em_x270_pin_config[] = { - GPIO13_GPIO, /* MMC card detect */ - GPIO56_GPIO, /* NAND Ready/Busy */ - GPIO95_GPIO, /* MMC Write protect */ + GPIO13_GPIO, /* MMC card detect */ + GPIO16_GPIO, /* USB hub reset */ + GPIO56_GPIO, /* NAND Ready/Busy */ + GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ + GPIO95_GPIO, /* MMC Write protect */ }; static unsigned long exeda_pin_config[] = { + GPIO10_GPIO, /* USB hub reset */ GPIO20_GPIO, /* NAND Ready/Busy */ GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */ + GPIO95_GPIO, /* touchpad IRQ */ GPIO114_GPIO, /* MMC card detect */ }; @@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {} /* PXA27x OHCI controller setup */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct regulator *em_x270_usb_ldo; + +static int em_x270_usb_hub_init(void) +{ + int err; + + em_x270_usb_ldo = regulator_get(NULL, "vcc usb"); + if (IS_ERR(em_x270_usb_ldo)) + return PTR_ERR(em_x270_usb_ldo); + + err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en"); + if (err) + goto err_free_usb_ldo; + + err = gpio_request(usb_hub_reset, "hub rst"); + if (err) + goto err_free_vbus_gpio; + + /* USB Hub power-on and reset */ + gpio_direction_output(usb_hub_reset, 0); + regulator_enable(em_x270_usb_ldo); + gpio_set_value(usb_hub_reset, 1); + gpio_set_value(usb_hub_reset, 0); + regulator_disable(em_x270_usb_ldo); + regulator_enable(em_x270_usb_ldo); + gpio_set_value(usb_hub_reset, 1); + + /* enable VBUS */ + gpio_direction_output(GPIO9_USB_VBUS_EN, 1); + + return 0; + +err_free_vbus_gpio: + gpio_free(GPIO9_USB_VBUS_EN); +err_free_usb_ldo: + regulator_put(em_x270_usb_ldo); + + return err; +} + static int em_x270_ohci_init(struct device *dev) { + int err; + + /* we don't want to entirely disable USB if the HUB init failed */ + err = em_x270_usb_hub_init(); + if (err) + pr_err("USB Hub initialization failed: %d\n", err); + /* enable port 2 transiever */ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; return 0; } +static void em_x270_ohci_exit(struct device *dev) +{ + gpio_free(usb_hub_reset); + gpio_free(GPIO9_USB_VBUS_EN); + + if (!IS_ERR(em_x270_usb_ldo)) { + if (regulator_is_enabled(em_x270_usb_ldo)) + regulator_disable(em_x270_usb_ldo); + + regulator_put(em_x270_usb_ldo); + } +} + static struct pxaohci_platform_data em_x270_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, .init = em_x270_ohci_init, + .exit = em_x270_ohci_exit, }; static void __init em_x270_init_ohci(void) @@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi) if (err) return err; + err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP"); + if (err) + goto err_free_pwen; + + if (machine_is_exeda()) { + err = gpio_request(GPIO37_WLAN_RST, "WLAN RST"); + if (err) + goto err_free_strap; + + gpio_direction_output(GPIO37_WLAN_RST, 1); + msleep(100); + } + gpio_direction_output(GPIO19_WLAN_STRAP, 1); - mdelay(100); + msleep(100); pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config)); gpio_direction_output(GPIO115_WLAN_PWEN, 0); - mdelay(100); + msleep(100); gpio_set_value(GPIO115_WLAN_PWEN, 1); - mdelay(100); + msleep(100); spi->bits_per_word = 16; spi_setup(spi); return 0; + +err_free_strap: + gpio_free(GPIO19_WLAN_STRAP); +err_free_pwen: + gpio_free(GPIO115_WLAN_PWEN); + + return err; } static int em_x270_libertas_teardown(struct spi_device *spi) { gpio_set_value(GPIO115_WLAN_PWEN, 0); gpio_free(GPIO115_WLAN_PWEN); + gpio_free(GPIO19_WLAN_STRAP); + + if (machine_is_exeda()) { + gpio_set_value(GPIO37_WLAN_RST, 0); + gpio_free(GPIO37_WLAN_RST); + } return 0; } @@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev) { int ret; - ret = gpio_request(GPIO93_CAM_RESET, "camera reset"); + ret = gpio_request(cam_reset, "camera reset"); if (ret) return ret; - gpio_direction_output(GPIO93_CAM_RESET, 0); + gpio_direction_output(cam_reset, 0); em_x270_camera_ldo = regulator_get(NULL, "vcc cam"); if (em_x270_camera_ldo == NULL) { - gpio_free(GPIO93_CAM_RESET); + gpio_free(cam_reset); return -ENODEV; } ret = regulator_enable(em_x270_camera_ldo); if (ret) { regulator_put(em_x270_camera_ldo); - gpio_free(GPIO93_CAM_RESET); + gpio_free(cam_reset); return ret; } - gpio_set_value(GPIO93_CAM_RESET, 1); + gpio_set_value(cam_reset, 1); return 0; } @@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on) if (on == is_on) return 0; - gpio_set_value(GPIO93_CAM_RESET, !on); + gpio_set_value(cam_reset, !on); if (on) ret = regulator_enable(em_x270_camera_ldo); @@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on) if (ret) return ret; - gpio_set_value(GPIO93_CAM_RESET, on); + gpio_set_value(cam_reset, on); return 0; } @@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = { }, }; -static struct i2c_pxa_platform_data em_x270_i2c_info = { - .fast_mode = 1, -}; - static void __init em_x270_init_camera(void) { - pxa_set_i2c_info(&em_x270_i2c_info); i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info)); pxa_set_camera_info(&em_x270_camera_platform_data); } @@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = { }; struct power_supply_info em_x270_psy_info = { - .name = "LP555597P6H-FPS", + .name = "battery", .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, .voltage_max_design = 4200000, .voltage_min_design = 3000000, @@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void) i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); } +static struct pca953x_platform_data exeda_gpio_ext_pdata = { + .gpio_base = 128, +}; + +static struct i2c_board_info exeda_i2c_info[] = { + { + I2C_BOARD_INFO("pca9555", 0x21), + .platform_data = &exeda_gpio_ext_pdata, + }, +}; + +static struct i2c_pxa_platform_data em_x270_i2c_info = { + .fast_mode = 1, +}; + +static void __init em_x270_init_i2c(void) +{ + pxa_set_i2c_info(&em_x270_i2c_info); + + if (machine_is_exeda()) + i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info)); +} + static void __init em_x270_module_init(void) { pr_info("%s\n", __func__); @@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void) mmc_cd = GPIO13_MMC_CD; nand_rb = GPIO56_NAND_RB; dm9000_flags = DM9000_PLATF_32BITONLY; + cam_reset = GPIO93_CAM_RESET; + usb_hub_reset = GPIO16_USB_HUB_RESET; } static void __init em_x270_exeda_init(void) @@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void) mmc_cd = GPIO114_MMC_CD; nand_rb = GPIO20_NAND_RB; dm9000_flags = DM9000_PLATF_16BITONLY; + cam_reset = GPIO130_CAM_RESET; + usb_hub_reset = GPIO10_USB_HUB_RESET; } static void __init em_x270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); +#ifdef CONFIG_PM + pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); +#endif + if (machine_is_em_x270()) em_x270_module_init(); else if (machine_is_exeda()) @@ -1111,8 +1237,9 @@ static void __init em_x270_init(void) em_x270_init_keypad(); em_x270_init_gpio_keys(); em_x270_init_ac97(); - em_x270_init_camera(); em_x270_init_spi(); + em_x270_init_i2c(); + em_x270_init_camera(); } MACHINE_START(EM_X270, "Compulab EM-X270") diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 7db966dc29ce..588b265e5755 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -17,6 +17,7 @@ #include <linux/delay.h> #include <linux/pwm_backlight.h> #include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -25,13 +26,19 @@ #include <mach/pxa27x.h> #include <mach/pxafb.h> #include <mach/ohci.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/hardware.h> #include <mach/pxa27x_keypad.h> #include "devices.h" #include "generic.h" +#define GPIO12_A780_FLIP_LID 12 +#define GPIO15_A1200_FLIP_LID 15 +#define GPIO15_A910_FLIP_LID 15 +#define GPIO12_E680_LOCK_SWITCH 12 +#define GPIO15_E6_LOCK_SWITCH 15 + static struct platform_pwm_backlight_data ezx_backlight_data = { .pwm_id = 0, .max_brightness = 1023, @@ -88,7 +95,7 @@ static struct pxafb_mach_info ezx_fb_info_2 = { .lcd_conn = LCD_COLOR_TFT_18BPP, }; -static struct platform_device *devices[] __initdata = { +static struct platform_device *ezx_devices[] __initdata = { &ezx_backlight_device, }; @@ -651,6 +658,35 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = { #endif /* CONFIG_MACH_EZX_E2 */ #ifdef CONFIG_MACH_EZX_A780 +/* gpio_keys */ +static struct gpio_keys_button a780_buttons[] = { + [0] = { + .code = SW_LID, + .gpio = GPIO12_A780_FLIP_LID, + .active_low = 0, + .desc = "A780 flip lid", + .type = EV_SW, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data a780_gpio_keys_platform_data = { + .buttons = a780_buttons, + .nbuttons = ARRAY_SIZE(a780_buttons), +}; + +static struct platform_device a780_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &a780_gpio_keys_platform_data, + }, +}; + +static struct platform_device *a780_devices[] __initdata = { + &a780_gpio_keys, +}; + static void __init a780_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -663,7 +699,8 @@ static void __init a780_init(void) pxa_set_keypad_info(&a780_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(a780_devices)); } MACHINE_START(EZX_A780, "Motorola EZX A780") @@ -678,10 +715,39 @@ MACHINE_END #endif #ifdef CONFIG_MACH_EZX_E680 +/* gpio_keys */ +static struct gpio_keys_button e680_buttons[] = { + [0] = { + .code = KEY_SCREENLOCK, + .gpio = GPIO12_E680_LOCK_SWITCH, + .active_low = 0, + .desc = "E680 lock switch", + .type = EV_KEY, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data e680_gpio_keys_platform_data = { + .buttons = e680_buttons, + .nbuttons = ARRAY_SIZE(e680_buttons), +}; + +static struct platform_device e680_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &e680_gpio_keys_platform_data, + }, +}; + static struct i2c_board_info __initdata e680_i2c_board_info[] = { { I2C_BOARD_INFO("tea5767", 0x81) }, }; +static struct platform_device *e680_devices[] __initdata = { + &e680_gpio_keys, +}; + static void __init e680_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -695,7 +761,8 @@ static void __init e680_init(void) pxa_set_keypad_info(&e680_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(e680_devices)); } MACHINE_START(EZX_E680, "Motorola EZX E680") @@ -710,10 +777,39 @@ MACHINE_END #endif #ifdef CONFIG_MACH_EZX_A1200 +/* gpio_keys */ +static struct gpio_keys_button a1200_buttons[] = { + [0] = { + .code = SW_LID, + .gpio = GPIO15_A1200_FLIP_LID, + .active_low = 0, + .desc = "A1200 flip lid", + .type = EV_SW, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = { + .buttons = a1200_buttons, + .nbuttons = ARRAY_SIZE(a1200_buttons), +}; + +static struct platform_device a1200_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &a1200_gpio_keys_platform_data, + }, +}; + static struct i2c_board_info __initdata a1200_i2c_board_info[] = { { I2C_BOARD_INFO("tea5767", 0x81) }, }; +static struct platform_device *a1200_devices[] __initdata = { + &a1200_gpio_keys, +}; + static void __init a1200_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -727,7 +823,8 @@ static void __init a1200_init(void) pxa_set_keypad_info(&a1200_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(a1200_devices)); } MACHINE_START(EZX_A1200, "Motorola EZX A1200") @@ -742,6 +839,35 @@ MACHINE_END #endif #ifdef CONFIG_MACH_EZX_A910 +/* gpio_keys */ +static struct gpio_keys_button a910_buttons[] = { + [0] = { + .code = SW_LID, + .gpio = GPIO15_A910_FLIP_LID, + .active_low = 0, + .desc = "A910 flip lid", + .type = EV_SW, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data a910_gpio_keys_platform_data = { + .buttons = a910_buttons, + .nbuttons = ARRAY_SIZE(a910_buttons), +}; + +static struct platform_device a910_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &a910_gpio_keys_platform_data, + }, +}; + +static struct platform_device *a910_devices[] __initdata = { + &a910_gpio_keys, +}; + static void __init a910_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -754,7 +880,8 @@ static void __init a910_init(void) pxa_set_keypad_info(&a910_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(a910_devices)); } MACHINE_START(EZX_A910, "Motorola EZX A910") @@ -769,10 +896,39 @@ MACHINE_END #endif #ifdef CONFIG_MACH_EZX_E6 +/* gpio_keys */ +static struct gpio_keys_button e6_buttons[] = { + [0] = { + .code = KEY_SCREENLOCK, + .gpio = GPIO15_E6_LOCK_SWITCH, + .active_low = 0, + .desc = "E6 lock switch", + .type = EV_KEY, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data e6_gpio_keys_platform_data = { + .buttons = e6_buttons, + .nbuttons = ARRAY_SIZE(e6_buttons), +}; + +static struct platform_device e6_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &e6_gpio_keys_platform_data, + }, +}; + static struct i2c_board_info __initdata e6_i2c_board_info[] = { { I2C_BOARD_INFO("tea5767", 0x81) }, }; +static struct platform_device *e6_devices[] __initdata = { + &e6_gpio_keys, +}; + static void __init e6_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -786,7 +942,8 @@ static void __init e6_init(void) pxa_set_keypad_info(&e6_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(e6_devices)); } MACHINE_START(EZX_E6, "Motorola EZX E6") @@ -805,6 +962,9 @@ static struct i2c_board_info __initdata e2_i2c_board_info[] = { { I2C_BOARD_INFO("tea5767", 0x81) }, }; +static struct platform_device *e2_devices[] __initdata = { +}; + static void __init e2_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); @@ -818,7 +978,8 @@ static void __init e2_init(void) pxa_set_keypad_info(&e2_keypad_platform_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); + platform_add_devices(ARRAY_AND_SIZE(e2_devices)); } MACHINE_START(EZX_E2, "Motorola EZX E2") diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c new file mode 100644 index 000000000000..7fff467e84fc --- /dev/null +++ b/arch/arm/mach-pxa/hx4700.c @@ -0,0 +1,851 @@ +/* + * Support for HP iPAQ hx4700 PDAs. + * + * Copyright (c) 2008-2009 Philipp Zabel + * + * Based on code: + * Copyright (c) 2004 Hewlett-Packard Company. + * Copyright (c) 2005 SDG Systems, LLC + * Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/lcd.h> +#include <linux/mfd/htc-egpio.h> +#include <linux/mfd/asic3.h> +#include <linux/mtd/physmap.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/regulator/bq24022.h> +#include <linux/regulator/machine.h> +#include <linux/spi/ads7846.h> +#include <linux/spi/spi.h> +#include <linux/usb/gpio_vbus.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa27x.h> +#include <mach/hx4700.h> +#include <plat/i2c.h> +#include <mach/irda.h> +#include <mach/pxa2xx_spi.h> + +#include <video/w100fb.h> + +#include "devices.h" +#include "generic.h" + +/* Physical address space information */ + +#define ATI_W3220_PHYS PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */ +#define ASIC3_PHYS PXA_CS3_PHYS +#define ASIC3_SD_PHYS (PXA_CS3_PHYS + 0x02000000) + +static unsigned long hx4700_pin_config[] __initdata = { + + /* SDRAM and Static Memory I/O Signals */ + GPIO20_nSDCS_2, + GPIO21_nSDCS_3, + GPIO15_nCS_1, + GPIO78_nCS_2, /* W3220 */ + GPIO79_nCS_3, /* ASIC3 */ + GPIO80_nCS_4, + GPIO33_nCS_5, /* EGPIO, WLAN */ + + /* PC CARD */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO85_nPCE_1, + GPIO104_PSKTSEL, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* FFUART (RS-232) */ + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + GPIO36_FFUART_DCD, + GPIO37_FFUART_DSR, + GPIO38_FFUART_RI, + GPIO39_FFUART_TXD, + GPIO40_FFUART_DTR, + GPIO41_FFUART_RTS, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* PWM 1 (Backlight) */ + GPIO17_PWM1_OUT, + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO113_I2S_SYSCLK, + + /* SSP 1 (NavPoint) */ + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, + + /* SSP 2 (TSC2046) */ + GPIO19_SSP2_SCLK, + GPIO86_SSP2_RXD, + GPIO87_SSP2_TXD, + GPIO88_GPIO, + + /* HX4700 specific input GPIOs */ + GPIO12_GPIO, /* ASIC3_IRQ */ + GPIO13_GPIO, /* W3220_IRQ */ + GPIO14_GPIO, /* nWLAN_IRQ */ + + GPIO10_GPIO, /* GSM_IRQ */ + GPIO13_GPIO, /* CPLD_IRQ */ + GPIO107_GPIO, /* DS1WM_IRQ */ + GPIO108_GPIO, /* GSM_READY */ + GPIO58_GPIO, /* TSC2046_nPENIRQ */ + GPIO66_GPIO, /* nSDIO_IRQ */ +}; + +#define HX4700_GPIO_IN(num, _desc) \ + { .gpio = (num), .dir = 0, .desc = (_desc) } +#define HX4700_GPIO_OUT(num, _init, _desc) \ + { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) } +struct gpio_ress { + unsigned gpio : 8; + unsigned dir : 1; + unsigned init : 1; + char *desc; +}; + +static int hx4700_gpio_request(struct gpio_ress *gpios, int size) +{ + int i, rc = 0; + int gpio; + int dir; + + for (i = 0; (!rc) && (i < size); i++) { + gpio = gpios[i].gpio; + dir = gpios[i].dir; + rc = gpio_request(gpio, gpios[i].desc); + if (rc) { + pr_err("Error requesting GPIO %d(%s) : %d\n", + gpio, gpios[i].desc, rc); + continue; + } + if (dir) + gpio_direction_output(gpio, gpios[i].init); + else + gpio_direction_input(gpio); + } + while ((rc) && (--i >= 0)) + gpio_free(gpios[i].gpio); + return rc; +} + +/* + * IRDA + */ + +static void irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF); +} + +static struct pxaficp_platform_data ficp_info = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = irda_transceiver_mode, +}; + +/* + * GPIO Keys + */ + +#define INIT_KEY(_code, _gpio, _active_low, _desc) \ + { \ + .code = KEY_##_code, \ + .gpio = _gpio, \ + .active_low = _active_low, \ + .desc = _desc, \ + .type = EV_KEY, \ + .wakeup = 1, \ + } + +static struct gpio_keys_button gpio_keys_buttons[] = { + INIT_KEY(POWER, GPIO0_HX4700_nKEY_POWER, 1, "Power button"), + INIT_KEY(MAIL, GPIO94_HX4700_KEY_MAIL, 0, "Mail button"), + INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"), + INIT_KEY(RECORD, GPIOD6_nKEY_RECORD, 1, "Record button"), + INIT_KEY(CALENDAR, GPIOD1_nKEY_CALENDAR, 1, "Calendar button"), + INIT_KEY(HOMEPAGE, GPIOD3_nKEY_HOME, 1, "Home button"), +}; + +static struct gpio_keys_platform_data gpio_keys_data = { + .buttons = gpio_keys_buttons, + .nbuttons = ARRAY_SIZE(gpio_keys_buttons), +}; + +static struct platform_device gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &gpio_keys_data, + }, + .id = -1, +}; + +/* + * ASIC3 + */ + +static u16 asic3_gpio_config[] = { + /* ASIC3 GPIO banks A and B along with some of C and D + implement the buffering for the CF slot. */ + ASIC3_CONFIG_GPIO(0, 1, 1, 0), + ASIC3_CONFIG_GPIO(1, 1, 1, 0), + ASIC3_CONFIG_GPIO(2, 1, 1, 0), + ASIC3_CONFIG_GPIO(3, 1, 1, 0), + ASIC3_CONFIG_GPIO(4, 1, 1, 0), + ASIC3_CONFIG_GPIO(5, 1, 1, 0), + ASIC3_CONFIG_GPIO(6, 1, 1, 0), + ASIC3_CONFIG_GPIO(7, 1, 1, 0), + ASIC3_CONFIG_GPIO(8, 1, 1, 0), + ASIC3_CONFIG_GPIO(9, 1, 1, 0), + ASIC3_CONFIG_GPIO(10, 1, 1, 0), + ASIC3_CONFIG_GPIO(11, 1, 1, 0), + ASIC3_CONFIG_GPIO(12, 1, 1, 0), + ASIC3_CONFIG_GPIO(13, 1, 1, 0), + ASIC3_CONFIG_GPIO(14, 1, 1, 0), + ASIC3_CONFIG_GPIO(15, 1, 1, 0), + + ASIC3_CONFIG_GPIO(16, 1, 1, 0), + ASIC3_CONFIG_GPIO(17, 1, 1, 0), + ASIC3_CONFIG_GPIO(18, 1, 1, 0), + ASIC3_CONFIG_GPIO(19, 1, 1, 0), + ASIC3_CONFIG_GPIO(20, 1, 1, 0), + ASIC3_CONFIG_GPIO(21, 1, 1, 0), + ASIC3_CONFIG_GPIO(22, 1, 1, 0), + ASIC3_CONFIG_GPIO(23, 1, 1, 0), + ASIC3_CONFIG_GPIO(24, 1, 1, 0), + ASIC3_CONFIG_GPIO(25, 1, 1, 0), + ASIC3_CONFIG_GPIO(26, 1, 1, 0), + ASIC3_CONFIG_GPIO(27, 1, 1, 0), + ASIC3_CONFIG_GPIO(28, 1, 1, 0), + ASIC3_CONFIG_GPIO(29, 1, 1, 0), + ASIC3_CONFIG_GPIO(30, 1, 1, 0), + ASIC3_CONFIG_GPIO(31, 1, 1, 0), + + /* GPIOC - CF, LEDs, SD */ + ASIC3_GPIOC0_LED0, /* red */ + ASIC3_GPIOC1_LED1, /* green */ + ASIC3_GPIOC2_LED2, /* blue */ + ASIC3_GPIOC4_CF_nCD, + ASIC3_GPIOC5_nCIOW, + ASIC3_GPIOC6_nCIOR, + ASIC3_GPIOC7_nPCE_1, + ASIC3_GPIOC8_nPCE_2, + ASIC3_GPIOC9_nPOE, + ASIC3_GPIOC10_nPWE, + ASIC3_GPIOC11_PSKTSEL, + ASIC3_GPIOC12_nPREG, + ASIC3_GPIOC13_nPWAIT, + ASIC3_GPIOC14_nPIOIS16, + ASIC3_GPIOC15_nPIOR, + + /* GPIOD: input GPIOs, CF */ + ASIC3_GPIOD11_nCIOIS16, + ASIC3_GPIOD12_nCWAIT, + ASIC3_GPIOD15_nPIOW, +}; + +static struct resource asic3_resources[] = { + /* GPIO part */ + [0] = { + .start = ASIC3_PHYS, + .end = ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), + .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), + .flags = IORESOURCE_IRQ, + }, + /* SD part */ + [2] = { + .start = ASIC3_SD_PHYS, + .end = ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1, + .flags = IORESOURCE_MEM, + }, + [3] = { + .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), + .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct asic3_platform_data asic3_platform_data = { + .gpio_config = asic3_gpio_config, + .gpio_config_num = ARRAY_SIZE(asic3_gpio_config), + .irq_base = IRQ_BOARD_START, + .gpio_base = HX4700_ASIC3_GPIO_BASE, +}; + +static struct platform_device asic3 = { + .name = "asic3", + .id = -1, + .resource = asic3_resources, + .num_resources = ARRAY_SIZE(asic3_resources), + .dev = { + .platform_data = &asic3_platform_data, + }, +}; + +/* + * EGPIO + */ + +static struct resource egpio_resources[] = { + [0] = { + .start = PXA_CS5_PHYS, + .end = PXA_CS5_PHYS + 0x4 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct htc_egpio_chip egpio_chips[] = { + [0] = { + .reg_start = 0, + .gpio_base = HX4700_EGPIO_BASE, + .num_gpios = 8, + .direction = HTC_EGPIO_OUTPUT, + }, +}; + +static struct htc_egpio_platform_data egpio_info = { + .reg_width = 16, + .bus_width = 16, + .chip = egpio_chips, + .num_chips = ARRAY_SIZE(egpio_chips), +}; + +static struct platform_device egpio = { + .name = "htc-egpio", + .id = -1, + .resource = egpio_resources, + .num_resources = ARRAY_SIZE(egpio_resources), + .dev = { + .platform_data = &egpio_info, + }, +}; + +/* + * LCD - Sony display connected to ATI Imageon w3220 + */ + +static int lcd_power; + +static void sony_lcd_init(void) +{ + gpio_set_value(GPIO84_HX4700_LCD_SQN, 1); + gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0); + gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0); + gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0); + gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0); + mdelay(10); + gpio_set_value(GPIO59_HX4700_LCD_PC1, 0); + gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0); + mdelay(20); + + gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1); + mdelay(5); + gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1); + + /* FIXME: init w3220 registers here */ + + mdelay(5); + gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1); + mdelay(10); + gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1); + mdelay(10); + gpio_set_value(GPIO59_HX4700_LCD_PC1, 1); + mdelay(10); + gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1); +} + +static void sony_lcd_off(void) +{ + gpio_set_value(GPIO59_HX4700_LCD_PC1, 0); + gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0); + mdelay(10); + gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0); + mdelay(10); + gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0); + mdelay(10); + gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0); +} + +static int hx4700_lcd_set_power(struct lcd_device *ldev, int level) +{ + switch (level) { + case FB_BLANK_UNBLANK: + sony_lcd_init(); + break; + case FB_BLANK_NORMAL: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_POWERDOWN: + sony_lcd_off(); + break; + } + lcd_power = level; + return 0; +} + +static int hx4700_lcd_get_power(struct lcd_device *lm) +{ + return lcd_power; +} + +static struct lcd_ops hx4700_lcd_ops = { + .get_power = hx4700_lcd_get_power, + .set_power = hx4700_lcd_set_power, +}; + +static struct lcd_device *hx4700_lcd_device; + +#ifdef CONFIG_PM +static void w3220_lcd_suspend(struct w100fb_par *wfb) +{ + sony_lcd_off(); +} + +static void w3220_lcd_resume(struct w100fb_par *wfb) +{ + sony_lcd_init(); +} +#else +#define w3220_lcd_resume NULL +#define w3220_lcd_suspend NULL +#endif + +static struct w100_tg_info w3220_tg_info = { + .suspend = w3220_lcd_suspend, + .resume = w3220_lcd_resume, +}; + +/* W3220_VGA QVGA */ +static struct w100_gen_regs w3220_regs = { + .lcd_format = 0x00000003, + .lcdd_cntl1 = 0x00000000, + .lcdd_cntl2 = 0x0003ffff, + .genlcd_cntl1 = 0x00abf003, /* 0x00fff003 */ + .genlcd_cntl2 = 0x00000003, + .genlcd_cntl3 = 0x000102aa, +}; + +static struct w100_mode w3220_modes[] = { +{ + .xres = 480, + .yres = 640, + .left_margin = 15, + .right_margin = 16, + .upper_margin = 8, + .lower_margin = 7, + .crtc_ss = 0x00000000, + .crtc_ls = 0xa1ff01f9, /* 0x21ff01f9 */ + .crtc_gs = 0xc0000000, /* 0x40000000 */ + .crtc_vpos_gs = 0x0000028f, + .crtc_ps1_active = 0x00000000, /* 0x41060010 */ + .crtc_rev = 0, + .crtc_dclk = 0x80000000, + .crtc_gclk = 0x040a0104, + .crtc_goe = 0, + .pll_freq = 95, + .pixclk_divider = 4, + .pixclk_divider_rotated = 4, + .pixclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .sysclk_src = CLK_SRC_PLL, +}, +{ + .xres = 240, + .yres = 320, + .left_margin = 9, + .right_margin = 8, + .upper_margin = 5, + .lower_margin = 4, + .crtc_ss = 0x80150014, + .crtc_ls = 0xa0fb00f7, + .crtc_gs = 0xc0080007, + .crtc_vpos_gs = 0x00080007, + .crtc_rev = 0x0000000a, + .crtc_dclk = 0x81700030, + .crtc_gclk = 0x8015010f, + .crtc_goe = 0x00000000, + .pll_freq = 95, + .pixclk_divider = 4, + .pixclk_divider_rotated = 4, + .pixclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .sysclk_src = CLK_SRC_PLL, +}, +}; + +struct w100_mem_info w3220_mem_info = { + .ext_cntl = 0x09640011, + .sdram_mode_reg = 0x00600021, + .ext_timing_cntl = 0x1a001545, /* 0x15001545 */ + .io_cntl = 0x7ddd7333, + .size = 0x1fffff, +}; + +struct w100_bm_mem_info w3220_bm_mem_info = { + .ext_mem_bw = 0x50413e01, + .offset = 0, + .ext_timing_ctl = 0x00043f7f, + .ext_cntl = 0x00000010, + .mode_reg = 0x00250000, + .io_cntl = 0x0fff0000, + .config = 0x08301480, +}; + +static struct w100_gpio_regs w3220_gpio_info = { + .init_data1 = 0xdfe00100, /* GPIO_DATA */ + .gpio_dir1 = 0xffff0000, /* GPIO_CNTL1 */ + .gpio_oe1 = 0x00000000, /* GPIO_CNTL2 */ + .init_data2 = 0x00000000, /* GPIO_DATA2 */ + .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */ + .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */ +}; + +static struct w100fb_mach_info w3220_info = { + .tg = &w3220_tg_info, + .mem = &w3220_mem_info, + .bm_mem = &w3220_bm_mem_info, + .gpio = &w3220_gpio_info, + .regs = &w3220_regs, + .modelist = w3220_modes, + .num_modes = 2, + .xtal_freq = 16000000, +}; + +static struct resource w3220_resources[] = { + [0] = { + .start = ATI_W3220_PHYS, + .end = ATI_W3220_PHYS + 0x00ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device w3220 = { + .name = "w100fb", + .id = -1, + .dev = { + .platform_data = &w3220_info, + }, + .num_resources = ARRAY_SIZE(w3220_resources), + .resource = w3220_resources, +}; + +/* + * Backlight + */ + +static struct platform_pwm_backlight_data backlight_data = { + .pwm_id = 1, + .max_brightness = 200, + .dft_brightness = 100, + .pwm_period_ns = 30923, +}; + +static struct platform_device backlight = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &pxa27x_device_pwm1.dev, + .platform_data = &backlight_data, + }, +}; + +/* + * USB "Transceiver" + */ + +static struct gpio_vbus_mach_info gpio_vbus_info = { + .gpio_pullup = GPIO76_HX4700_USBC_PUEN, + .gpio_vbus = GPIOD14_nUSBC_DETECT, + .gpio_vbus_inverted = 1, +}; + +static struct platform_device gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &gpio_vbus_info, + }, +}; + +/* + * Touchscreen - TSC2046 connected to SSP2 + */ + +static const struct ads7846_platform_data tsc2046_info = { + .model = 7846, + .vref_delay_usecs = 100, + .pressure_max = 512, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .gpio_pendown = GPIO58_HX4700_TSC2046_nPENIRQ, +}; + +static struct pxa2xx_spi_chip tsc2046_chip = { + .tx_threshold = 1, + .rx_threshold = 2, + .timeout = 64, + .gpio_cs = GPIO88_HX4700_TSC2046_CS, +}; + +static struct spi_board_info tsc2046_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 2, + .max_speed_hz = 2600000, /* 100 kHz sample rate */ + .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ), + .platform_data = &tsc2046_info, + .controller_data = &tsc2046_chip, + }, +}; + +static struct pxa2xx_spi_master pxa_ssp2_master_info = { + .num_chipselect = 1, + .clock_enable = CKEN_SSP2, + .enable_dma = 1, +}; + +/* + * External power + */ + +static int power_supply_init(struct device *dev) +{ + return gpio_request(GPIOD9_nAC_IN, "AC charger detect"); +} + +static int hx4700_is_ac_online(void) +{ + return !gpio_get_value(GPIOD9_nAC_IN); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIOD9_nAC_IN); +} + +static char *hx4700_supplicants[] = { + "ds2760-battery.0", "backup-battery" +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = hx4700_is_ac_online, + .exit = power_supply_exit, + .supplied_to = hx4700_supplicants, + .num_supplicants = ARRAY_SIZE(hx4700_supplicants), +}; + +static struct resource power_supply_resources[] = { + [0] = { + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = gpio_to_irq(GPIOD9_nAC_IN), + .end = gpio_to_irq(GPIOD9_nAC_IN), + }, + [1] = { + .name = "usb", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = gpio_to_irq(GPIOD14_nUSBC_DETECT), + .end = gpio_to_irq(GPIOD14_nUSBC_DETECT), + }, +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + +/* + * Battery charger + */ + +static struct regulator_consumer_supply bq24022_consumers[] = { + { + .dev = &gpio_vbus.dev, + .supply = "vbus_draw", + }, + { + .dev = &power_supply.dev, + .supply = "ac_draw", + }, +}; + +static struct regulator_init_data bq24022_init_data = { + .constraints = { + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, +}; + +static struct bq24022_mach_info bq24022_info = { + .gpio_nce = GPIO72_HX4700_BQ24022_nCHARGE_EN, + .gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2, + .init_data = &bq24022_init_data, +}; + +static struct platform_device bq24022 = { + .name = "bq24022", + .id = -1, + .dev = { + .platform_data = &bq24022_info, + }, +}; + +/* + * StrataFlash + */ + +static void hx4700_set_vpp(struct map_info *map, int vpp) +{ + gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp); +} + +static struct resource strataflash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_128M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data strataflash_data = { + .width = 4, + .set_vpp = hx4700_set_vpp, +}; + +static struct platform_device strataflash = { + .name = "physmap-flash", + .id = -1, + .resource = &strataflash_resource, + .num_resources = 1, + .dev = { + .platform_data = &strataflash_data, + }, +}; + +/* + * PCMCIA + */ + +static struct platform_device pcmcia = { + .name = "hx4700-pcmcia", + .dev = { + .parent = &asic3.dev, + }, +}; + +/* + * Platform devices + */ + +static struct platform_device *devices[] __initdata = { + &asic3, + &gpio_keys, + &backlight, + &w3220, + &egpio, + &bq24022, + &gpio_vbus, + &power_supply, + &strataflash, + &pcmcia, +}; + +static struct gpio_ress global_gpios[] = { + HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"), + HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"), + HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"), + HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1, 1, "LCD_PC1"), + HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET, 1, "LCD_RESET"), + HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1, 1, "LCD_SLIN1"), + HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN, 1, "LCD_SQN"), + HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"), + HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"), + HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON, 1, "RS232_ON"), + HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET, 1, "ASIC3_nRESET"), + HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET, 1, "EUART_RESET"), + HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON, 1, "nIR_EN"), +}; + +static void __init hx4700_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); + hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + pxa_set_ficp_info(&ficp_info); + pxa27x_set_i2c_power_info(NULL); + pxa_set_i2c_info(NULL); + pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); + spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); + + hx4700_lcd_device = lcd_device_register("w100fb", NULL, + (void *)&w3220_info, &hx4700_lcd_ops); + + gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0); + mdelay(10); + gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1); + mdelay(10); +} + +MACHINE_START(H4700, "HP iPAQ HX4700") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .init_machine = hx4700_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index 2b27336c29f1..961807dc6467 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -22,6 +22,7 @@ #include <linux/spi/spi.h> #include <linux/i2c.h> #include <linux/mfd/da903x.h> +#include <linux/sht15.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -29,7 +30,7 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/udc.h> #include <mach/mmc.h> #include <mach/pxa2xx_spi.h> @@ -102,6 +103,10 @@ static unsigned long imote2_pin_config[] __initdata = { GPIO96_GPIO, /* accelerometer interrupt */ GPIO99_GPIO, /* ADC interrupt */ + /* SHT15 */ + GPIO100_GPIO, + GPIO98_GPIO, + /* Connector pins specified as gpios */ GPIO94_GPIO, /* large basic connector pin 14 */ GPIO10_GPIO, /* large basic connector pin 23 */ @@ -112,6 +117,26 @@ static unsigned long imote2_pin_config[] __initdata = { GPIO105_GPIO, /* blue led */ }; +static struct sht15_platform_data platform_data_sht15 = { + .gpio_data = 100, + .gpio_sck = 98, +}; + +static struct platform_device sht15 = { + .name = "sht15", + .id = -1, + .dev = { + .platform_data = &platform_data_sht15, + }, +}; + +static struct regulator_consumer_supply imote2_sensor_3_con[] = { + { + .dev = &sht15.dev, + .supply = "vcc", + }, +}; + static struct gpio_led imote2_led_pins[] = { { .name = "imote2:red", @@ -257,6 +282,8 @@ static struct regulator_init_data imote2_ldo_init_data[] = { .min_uV = 2800000, .max_uV = 3000000, }, + .num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con), + .consumer_supplies = imote2_sensor_3_con, }, [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/ .constraints = { @@ -432,6 +459,9 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = { .type = "tmp175", .addr = 0x4A, .irq = IRQ_GPIO(96), + }, { /* IMB400 Multimedia board */ + .type = "wm8940", + .addr = 0x1A, }, }; @@ -456,25 +486,12 @@ static struct pxa2xx_spi_master pxa_ssp_master_2_info = { .num_chipselect = 1, }; -/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove - * the need for these functions. - */ -static void spi1control(u32 command) -{ - gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1); -}; - -static void spi3control(u32 command) -{ - gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1); -}; - static struct pxa2xx_spi_chip staccel_chip_info = { .tx_threshold = 8, .rx_threshold = 8, .dma_burst_size = 8, .timeout = 235, - .cs_control = spi1control, + .gpio_cs = 24, }; static struct pxa2xx_spi_chip cc2420_info = { @@ -482,7 +499,7 @@ static struct pxa2xx_spi_chip cc2420_info = { .rx_threshold = 8, .dma_burst_size = 8, .timeout = 235, - .cs_control = spi3control, + .gpio_cs = 39, }; static struct spi_board_info spi_board_info[] __initdata = { @@ -521,6 +538,7 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = { static struct platform_device *imote2_devices[] = { &imote2_flash_device, &imote2_leds, + &sht15, }; static struct i2c_pxa_platform_data i2c_pwr_pdata = { @@ -538,8 +556,6 @@ static void __init imote2_init(void) /* SPI chip select directions - all other directions should * be handled by drivers.*/ gpio_direction_output(37, 0); - gpio_direction_output(24, 0); - gpio_direction_output(39, 0); platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h new file mode 100644 index 000000000000..9eaeed1f87f1 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -0,0 +1,131 @@ +/* + * GPIO and IRQ definitions for HP iPAQ hx4700 + * + * Copyright (c) 2008 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _HX4700_H_ +#define _HX4700_H_ + +#include <linux/gpio.h> +#include <linux/mfd/asic3.h> + +#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO +#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) + +/* + * PXA GPIOs + */ + +#define GPIO0_HX4700_nKEY_POWER 0 +#define GPIO12_HX4700_ASIC3_IRQ 12 +#define GPIO13_HX4700_W3220_IRQ 13 +#define GPIO14_HX4700_nWLAN_IRQ 14 +#define GPIO18_HX4700_RDY 18 +#define GPIO22_HX4700_LCD_RL 22 +#define GPIO27_HX4700_CODEC_ON 27 +#define GPIO32_HX4700_RS232_ON 32 +#define GPIO52_HX4700_CPU_nBATT_FAULT 52 +#define GPIO58_HX4700_TSC2046_nPENIRQ 58 +#define GPIO59_HX4700_LCD_PC1 59 +#define GPIO60_HX4700_CF_RNB 60 +#define GPIO61_HX4700_W3220_nRESET 61 +#define GPIO62_HX4700_LCD_nRESET 62 +#define GPIO63_HX4700_CPU_SS_nRESET 63 +#define GPIO65_HX4700_TSC2046_PEN_PU 65 +#define GPIO66_HX4700_ASIC3_nSDIO_IRQ 66 +#define GPIO67_HX4700_EUART_PS 67 +#define GPIO70_HX4700_LCD_SLIN1 70 +#define GPIO71_HX4700_ASIC3_nRESET 71 +#define GPIO72_HX4700_BQ24022_nCHARGE_EN 72 +#define GPIO73_HX4700_LCD_UD_1 73 +#define GPIO75_HX4700_EARPHONE_nDET 75 +#define GPIO76_HX4700_USBC_PUEN 76 +#define GPIO81_HX4700_CPU_GP_nRESET 81 +#define GPIO82_HX4700_EUART_RESET 82 +#define GPIO83_HX4700_WLAN_nRESET 83 +#define GPIO84_HX4700_LCD_SQN 84 +#define GPIO85_HX4700_nPCE1 85 +#define GPIO88_HX4700_TSC2046_CS 88 +#define GPIO91_HX4700_FLASH_VPEN 91 +#define GPIO92_HX4700_HP_DRIVER 92 +#define GPIO93_HX4700_EUART_INT 93 +#define GPIO94_HX4700_KEY_MAIL 94 +#define GPIO95_HX4700_BATT_OFF 95 +#define GPIO96_HX4700_BQ24022_ISET2 96 +#define GPIO97_HX4700_nBL_DETECT 97 +#define GPIO99_HX4700_KEY_CONTACTS 99 +#define GPIO100_HX4700_AUTO_SENSE 100 /* BL auto brightness */ +#define GPIO102_HX4700_SYNAPTICS_POWER_ON 102 +#define GPIO103_HX4700_SYNAPTICS_INT 103 +#define GPIO105_HX4700_nIR_ON 105 +#define GPIO106_HX4700_CPU_BT_nRESET 106 +#define GPIO107_HX4700_SPK_nSD 107 +#define GPIO109_HX4700_CODEC_nPDN 109 +#define GPIO110_HX4700_LCD_LVDD_3V3_ON 110 +#define GPIO111_HX4700_LCD_AVDD_3V3_ON 111 +#define GPIO112_HX4700_LCD_N2V7_7V3_ON 112 +#define GPIO114_HX4700_CF_RESET 114 +#define GPIO116_HX4700_CPU_HW_nRESET 116 + +/* + * ASIC3 GPIOs + */ + +#define GPIOC_BASE (HX4700_ASIC3_GPIO_BASE + 32) +#define GPIOD_BASE (HX4700_ASIC3_GPIO_BASE + 48) + +#define GPIOC0_LED_RED (GPIOC_BASE + 0) +#define GPIOC1_LED_GREEN (GPIOC_BASE + 1) +#define GPIOC2_LED_BLUE (GPIOC_BASE + 2) +#define GPIOC3_nSD_CS (GPIOC_BASE + 3) +#define GPIOC4_CF_nCD (GPIOC_BASE + 4) /* Input */ +#define GPIOC5_nCIOW (GPIOC_BASE + 5) /* Output, to CF */ +#define GPIOC6_nCIOR (GPIOC_BASE + 6) /* Output, to CF */ +#define GPIOC7_nPCE1 (GPIOC_BASE + 7) /* Input, from CPU */ +#define GPIOC8_nPCE2 (GPIOC_BASE + 8) /* Input, from CPU */ +#define GPIOC9_nPOE (GPIOC_BASE + 9) /* Input, from CPU */ +#define GPIOC10_CF_nPWE (GPIOC_BASE + 10) /* Input */ +#define GPIOC11_PSKTSEL (GPIOC_BASE + 11) /* Input, from CPU */ +#define GPIOC12_nPREG (GPIOC_BASE + 12) /* Input, from CPU */ +#define GPIOC13_nPWAIT (GPIOC_BASE + 13) /* Output, to CPU */ +#define GPIOC14_nPIOIS16 (GPIOC_BASE + 14) /* Output, to CPU */ +#define GPIOC15_nPIOR (GPIOC_BASE + 15) /* Input, from CPU */ + +#define GPIOD0_CPU_SS_INT (GPIOD_BASE + 0) /* Input */ +#define GPIOD1_nKEY_CALENDAR (GPIOD_BASE + 1) +#define GPIOD2_BLUETOOTH_WAKEUP (GPIOD_BASE + 2) +#define GPIOD3_nKEY_HOME (GPIOD_BASE + 3) +#define GPIOD4_CF_nCD (GPIOD_BASE + 4) /* Input, from CF */ +#define GPIOD5_nPIO (GPIOD_BASE + 5) /* Input */ +#define GPIOD6_nKEY_RECORD (GPIOD_BASE + 6) +#define GPIOD7_nSDIO_DETECT (GPIOD_BASE + 7) +#define GPIOD8_COM_DCD (GPIOD_BASE + 8) /* Input */ +#define GPIOD9_nAC_IN (GPIOD_BASE + 9) +#define GPIOD10_nSDIO_IRQ (GPIOD_BASE + 10) /* Input */ +#define GPIOD11_nCIOIS16 (GPIOD_BASE + 11) /* Input, from CF */ +#define GPIOD12_nCWAIT (GPIOD_BASE + 12) /* Input, from CF */ +#define GPIOD13_CF_RNB (GPIOD_BASE + 13) /* Input */ +#define GPIOD14_nUSBC_DETECT (GPIOD_BASE + 14) +#define GPIOD15_nPIOW (GPIOD_BASE + 15) /* Input, from CPU */ + +/* + * EGPIOs + */ + +#define EGPIO0_VCC_3V3_EN (HX4700_EGPIO_BASE + 0) /* WLAN support chip */ +#define EGPIO1_WL_VREG_EN (HX4700_EGPIO_BASE + 1) /* WLAN power */ +#define EGPIO2_VCC_2V1_WL_EN (HX4700_EGPIO_BASE + 2) /* unused */ +#define EGPIO3_SS_PWR_ON (HX4700_EGPIO_BASE + 3) /* smart slot power */ +#define EGPIO4_CF_3V3_ON (HX4700_EGPIO_BASE + 4) /* CF 3.3V enable */ +#define EGPIO5_BT_3V3_ON (HX4700_EGPIO_BASE + 5) /* BT 3.3V enable */ +#define EGPIO6_WL1V8_EN (HX4700_EGPIO_BASE + 6) /* WLAN 1.8V enable */ +#define EGPIO7_VCC_3V3_WL_EN (HX4700_EGPIO_BASE + 7) /* WLAN 3.3V enable */ +#define EGPIO8_USB_3V3_ON (HX4700_EGPIO_BASE + 8) /* unused */ + +#endif /* _HX4700_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 32bb4a2eb7f1..6a1d95993342 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -91,13 +91,23 @@ #define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) /* - * The next 16 interrupts are for board specific purposes. Since + * The following interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use - * these. If you need more, increase IRQ_BOARD_END, but keep it - * within sensible limits. + * these. There will be 16 IRQs by default. If it is not enough, + * IRQ_BOARD_END is allowed be customized for each board, but keep + * the numbers within sensible limits and in descending order, so + * when multiple config options are selected, the maximum will be + * used. */ #define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) + +#if defined(CONFIG_MACH_H4700) +#define IRQ_BOARD_END (IRQ_BOARD_START + 70) +#elif defined(CONFIG_MACH_ZYLONITE) +#define IRQ_BOARD_END (IRQ_BOARD_START + 32) +#else #define IRQ_BOARD_END (IRQ_BOARD_START + 16) +#endif #define IRQ_SA1111_START (IRQ_BOARD_END) #define IRQ_GPAIN0 (IRQ_BOARD_END + 0) @@ -188,8 +198,6 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS) #define NR_IRQS (IRQ_BOARD_END) -#elif defined(CONFIG_MACH_ZYLONITE) -#define NR_IRQS (IRQ_BOARD_START + 32) #else #define NR_IRQS (IRQ_BOARD_START) #endif diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h index 07897e61d05a..3ce4682eabb6 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h @@ -283,6 +283,9 @@ #define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT) #define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT) #define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT) +#define GPIO75_UART1_RXD MFP_CFG_LPM(GPIO75, AF1, FLOAT) +#define GPIO76_UART1_RXD MFP_CFG_LPM(GPIO76, AF3, FLOAT) +#define GPIO76_UART1_TXD MFP_CFG_LPM(GPIO76, AF1, FLOAT) #define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT) #define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT) #define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT) @@ -291,6 +294,9 @@ #define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT) #define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT) #define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT) +#define GPIO77_UART1_CTS MFP_CFG_LPM(GPIO77, AF1, FLOAT) +#define GPIO82_UART1_RTS MFP_CFG_LPM(GPIO82, AF1, FLOAT) +#define GPIO82_UART1_CTS MFP_CFG_LPM(GPIO82, AF3, FLOAT) #define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT) #define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT) #define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT) @@ -299,13 +305,18 @@ #define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT) #define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT) #define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT) +#define GPIO79_UART1_DSR MFP_CFG_LPM(GPIO79, AF1, FLOAT) +#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF1, FLOAT) +#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF3, FLOAT) #define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT) #define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT) #define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT) #define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT) #define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT) +#define GPIO78_UART1_DCD MFP_CFG_LPM(GPIO78, AF1, FLOAT) #define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT) #define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT) +#define GPIO80_UART1_RI MFP_CFG_LPM(GPIO80, AF1, FLOAT) #define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT) /* UART2 */ @@ -438,6 +449,9 @@ #define GPIO2_RDY MFP_CFG(GPIO2, AF1) #define GPIO5_NPIOR MFP_CFG(GPIO5, AF3) +#define GPIO6_NPIOW MFP_CFG(GPIO6, AF3) +#define GPIO7_NPIOS16 MFP_CFG(GPIO7, AF3) +#define GPIO8_NPWAIT MFP_CFG(GPIO8, AF3) #define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1) #define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index fb13c82ad6dc..8721b8010221 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -56,7 +56,6 @@ #define GPIO_NR_PALMLD_LED_AMBER 94 /* IDE */ -#define GPIO_NR_PALMLD_IDE_IRQ 95 #define GPIO_NR_PALMLD_IDE_RESET 98 #define GPIO_NR_PALMLD_IDE_PWEN 115 diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index a6eeef8a075f..fd8360c6839d 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -27,6 +27,8 @@ extern void pxa27x_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); extern int pxa_pm_enter(suspend_state_t state); +extern int pxa_pm_prepare(void); +extern void pxa_pm_finish(void); /* NOTE: this is for PM debugging on Lubbock, it's really a big * ugly, but let's keep the crap minimum here, instead of direct diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index 6876e16c2970..0b702693f458 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -16,4 +16,7 @@ #define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ + +extern int __init pxa27x_set_pwrmode(unsigned int mode); + #endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h index 2d00db22b981..1920dc6b05dc 100644 --- a/arch/arm/include/asm/hardware/sharpsl_pm.h +++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. * */ - -#include <linux/interrupt.h> +#ifndef _MACH_SHARPSL_PM +#define _MACH_SHARPSL_PM struct sharpsl_charger_machinfo { void (*init)(void); @@ -100,7 +100,5 @@ extern struct sharpsl_pm_status sharpsl_pm; void sharpsl_battery_kick(void); void sharpsl_pm_led(int val); -irqreturn_t sharpsl_ac_isr(int irq, void *dev_id); -irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id); -irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id); +#endif diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 5706cea95d11..b54749413e96 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -36,7 +36,8 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { if (machine_is_littleton() || machine_is_intelmote2() - || machine_is_csb726()) + || machine_is_csb726() || machine_is_stargate2() + || machine_is_cm_x300()) UART = STUART; } diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index c872b9feb4d4..55b3788fd1ae 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -42,14 +42,17 @@ #include <mach/pxa300.h> #include <mach/pxafb.h> #include <mach/ssp.h> +#include <mach/mmc.h> #include <mach/pxa2xx_spi.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/pxa27x_keypad.h> #include <mach/pxa3xx_nand.h> #include <mach/littleton.h> #include "generic.h" +#define GPIO_MMC1_CARD_DETECT mfp_to_gpio(MFP_PIN_GPIO15) + /* Littleton MFP configurations */ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { /* LCD */ @@ -98,6 +101,15 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { GPIO123_KP_MKOUT_2, GPIO124_KP_MKOUT_3, GPIO125_KP_MKOUT_4, + + /* MMC1 */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, + GPIO15_GPIO, /* card detect */ }; static struct resource smc91x_resources[] = { @@ -179,15 +191,10 @@ static struct pxa2xx_spi_master littleton_spi_info = { .num_chipselect = 1, }; -static void littleton_tdo24m_cs(u32 cmd) -{ - gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip littleton_tdo24m_chip = { .rx_threshold = 1, .tx_threshold = 1, - .cs_control = littleton_tdo24m_cs, + .gpio_cs = LITTLETON_GPIO_LCD_CS, }; static struct spi_board_info littleton_spi_devices[] __initdata = { @@ -202,16 +209,6 @@ static struct spi_board_info littleton_spi_devices[] __initdata = { static void __init littleton_init_spi(void) { - int err; - - err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS"); - if (err) { - pr_warning("failed to request GPIO for LCS CS\n"); - return; - } - - gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1); - pxa2xx_set_spi_info(2, &littleton_spi_info); spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices)); } @@ -267,6 +264,56 @@ static void __init littleton_init_keypad(void) static inline void littleton_init_keypad(void) {} #endif +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static int littleton_mci_init(struct device *dev, + irq_handler_t littleton_detect_int, void *data) +{ + int err, gpio_cd = GPIO_MMC1_CARD_DETECT; + + err = gpio_request(gpio_cd, "mmc card detect"); + if (err) + goto err_request_cd; + + gpio_direction_input(gpio_cd); + + err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "mmc card detect", data); + if (err) { + dev_err(dev, "failed to request card detect IRQ\n"); + goto err_request_irq; + } + return 0; + +err_request_irq: + gpio_free(gpio_cd); +err_request_cd: + return err; +} + +static void littleton_mci_exit(struct device *dev, void *data) +{ + int gpio_cd = GPIO_MMC1_CARD_DETECT; + + free_irq(gpio_to_irq(gpio_cd), data); + gpio_free(gpio_cd); +} + +static struct pxamci_platform_data littleton_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .init = littleton_mci_init, + .exit = littleton_mci_exit, +}; + +static void __init littleton_init_mmc(void) +{ + pxa_set_mci_info(&littleton_mci_platform_data); +} +#else +static inline void littleton_init_mmc(void) {} +#endif + #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE) static struct mtd_partition littleton_nand_partitions[] = { [0] = { @@ -407,6 +454,7 @@ static void __init littleton_init(void) littleton_init_spi(); littleton_init_i2c(); + littleton_init_mmc(); littleton_init_lcd(); littleton_init_keypad(); littleton_init_nand(); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index c899bbd94dc0..ca39669cffc5 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -36,7 +36,7 @@ #include <mach/pxa27x.h> #include <mach/magician.h> #include <mach/pxafb.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> @@ -745,6 +745,14 @@ static struct platform_device strataflash = { }; /* + * I2C + */ + +static struct i2c_pxa_platform_data i2c_info = { + .fast_mode = 1, +}; + +/* * Platform devices */ @@ -771,7 +779,7 @@ static void __init magician_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(ARRAY_AND_SIZE(devices)); err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN"); if (!err) { @@ -779,7 +787,7 @@ static void __init magician_init(void) pxa_set_ficp_info(&magician_ficp_info); } pxa27x_set_i2c_power_info(NULL); - pxa_set_i2c_info(NULL); + pxa_set_i2c_info(&i2c_info); pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index a6c8429e975f..f4dabf0273ca 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -46,7 +46,7 @@ #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index ff8052ce0a05..4dc8c2ec40a9 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -48,7 +48,7 @@ #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/camera.h> #include <mach/audio.h> #include <media/soc_camera.h> @@ -798,7 +798,7 @@ static void mioa701_restart(char c, const char *cmd) arm_machine_restart('s', cmd); } -struct gpio_ress global_gpios[] = { +static struct gpio_ress global_gpios[] = { MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"), MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"), MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power") diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 471a853e548b..ed70f281dd09 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -129,7 +129,7 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO81_GPIO, /* wifi reset */ /* HDD */ - GPIO95_GPIO, /* HDD irq */ + GPIO98_GPIO, /* HDD reset */ GPIO115_GPIO, /* HDD power */ /* MISC */ @@ -496,6 +496,14 @@ static struct platform_device palmld_asoc = { }; /****************************************************************************** + * HDD + ******************************************************************************/ +static struct platform_device palmld_hdd = { + .name = "pata_palmld", + .id = -1, +}; + +/****************************************************************************** * Framebuffer ******************************************************************************/ static struct pxafb_mode_info palmld_lcd_modes[] = { @@ -524,30 +532,18 @@ static struct pxafb_mach_info palmld_lcd_screen = { /****************************************************************************** * Power management - standby ******************************************************************************/ -#ifdef CONFIG_PM -static u32 *addr __initdata; -static u32 resume[3] __initdata = { - 0xe3a00101, /* mov r0, #0x40000000 */ - 0xe380060f, /* orr r0, r0, #0x00f00000 */ - 0xe590f008, /* ldr pc, [r0, #0x08] */ -}; - -static int __init palmld_pm_init(void) +static void __init palmld_pm_init(void) { - int i; - - /* this is where the bootloader jumps */ - addr = phys_to_virt(PALMLD_STR_BASE); - - for (i = 0; i < 3; i++) - addr[i] = resume[i]; - - return 0; + static u32 resume[] = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ + }; + + /* copy the bootloader */ + memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume)); } -device_initcall(palmld_pm_init); -#endif - /****************************************************************************** * Machine init ******************************************************************************/ @@ -559,6 +555,7 @@ static struct platform_device *devices[] __initdata = { &palmld_leds, &power_supply, &palmld_asoc, + &palmld_hdd, }; static struct map_desc palmld_io_desc[] __initdata = { @@ -586,6 +583,7 @@ static void __init palmld_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config)); + palmld_pm_init(); set_pxa_fb_info(&palmld_lcd_screen); pxa_set_mci_info(&palmld_mci_platform_data); pxa_set_ac97_info(&palmld_ac97_pdata); diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 05bf979b78a6..aae64a12a734 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -26,6 +26,7 @@ #include <linux/gpio.h> #include <linux/wm97xx_batt.h> #include <linux/power_supply.h> +#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -343,11 +344,18 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = { /****************************************************************************** * UDC ******************************************************************************/ -static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { +static struct gpio_vbus_mach_info palmt5_udc_info = { .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, .gpio_vbus_inverted = 1, .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP, - .gpio_pullup_inverted = 0, +}; + +static struct platform_device palmt5_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &palmt5_udc_info, + }, }; /****************************************************************************** @@ -466,30 +474,18 @@ static struct pxafb_mach_info palmt5_lcd_screen = { /****************************************************************************** * Power management - standby ******************************************************************************/ -#ifdef CONFIG_PM -static u32 *addr __initdata; -static u32 resume[3] __initdata = { - 0xe3a00101, /* mov r0, #0x40000000 */ - 0xe380060f, /* orr r0, r0, #0x00f00000 */ - 0xe590f008, /* ldr pc, [r0, #0x08] */ -}; - -static int __init palmt5_pm_init(void) +static void __init palmt5_pm_init(void) { - int i; - - /* this is where the bootloader jumps */ - addr = phys_to_virt(PALMT5_STR_BASE); - - for (i = 0; i < 3; i++) - addr[i] = resume[i]; - - return 0; + static u32 resume[] = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ + }; + + /* copy the bootloader */ + memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume)); } -device_initcall(palmt5_pm_init); -#endif - /****************************************************************************** * Machine init ******************************************************************************/ @@ -500,6 +496,7 @@ static struct platform_device *devices[] __initdata = { &palmt5_backlight, &power_supply, &palmt5_asoc, + &palmt5_gpio_vbus, }; /* setup udc GPIOs initial state */ @@ -515,14 +512,15 @@ static void __init palmt5_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); + palmt5_pm_init(); set_pxa_fb_info(&palmt5_lcd_screen); pxa_set_mci_info(&palmt5_mci_platform_data); palmt5_udc_init(); pxa_set_ac97_info(&palmt5_ac97_pdata); - pxa_set_udc_info(&palmt5_udc_info); pxa_set_ficp_info(&palmt5_ficp_platform_data); pxa_set_keypad_info(&palmt5_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 43fcf2e86887..d823b09801df 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/wm97xx_batt.h> #include <linux/power_supply.h> +#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,6 +38,7 @@ #include <mach/mfp-pxa25x.h> #include <mach/irda.h> #include <mach/udc.h> +#include <mach/palmasoc.h> #include "generic.h" #include "devices.h" @@ -107,6 +109,7 @@ static unsigned long palmte2_pin_config[] __initdata = { GPIO1_RST, /* reset */ GPIO4_GPIO, /* Hotsync button */ GPIO9_GPIO, /* power detect */ + GPIO15_GPIO, /* earphone detect */ GPIO37_GPIO, /* LCD power */ GPIO56_GPIO, /* Backlight power */ }; @@ -318,11 +321,18 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = { /****************************************************************************** * UDC ******************************************************************************/ -static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = { +static struct gpio_vbus_mach_info palmte2_udc_info = { .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N, .gpio_vbus_inverted = 1, .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP, - .gpio_pullup_inverted = 0, +}; + +static struct platform_device palmte2_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &palmte2_udc_info, + }, }; /****************************************************************************** @@ -395,6 +405,21 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { }; /****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palmte2_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT, +}; + +static struct platform_device palmte2_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmte2_asoc_pdata, + }, +}; + +/****************************************************************************** * Framebuffer ******************************************************************************/ static struct pxafb_mode_info palmte2_lcd_modes[] = { @@ -429,6 +454,8 @@ static struct platform_device *devices[] __initdata = { #endif &palmte2_backlight, &power_supply, + &palmte2_asoc, + &palmte2_gpio_vbus, }; /* setup udc GPIOs initial state */ @@ -447,7 +474,6 @@ static void __init palmte2_init(void) set_pxa_fb_info(&palmte2_lcd_screen); pxa_set_mci_info(&palmte2_mci_platform_data); palmte2_udc_init(); - pxa_set_udc_info(&palmte2_udc_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmte2_ficp_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index e99a893c58a7..6c15d84bde53 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -27,6 +27,7 @@ #include <linux/gpio.h> #include <linux/wm97xx_batt.h> #include <linux/power_supply.h> +#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -359,11 +360,18 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = { /****************************************************************************** * UDC ******************************************************************************/ -static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { +static struct gpio_vbus_mach_info palmtx_udc_info = { .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, .gpio_vbus_inverted = 1, .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP, - .gpio_pullup_inverted = 0, +}; + +static struct platform_device palmtx_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &palmtx_udc_info, + }, }; /****************************************************************************** @@ -483,30 +491,18 @@ static struct pxafb_mach_info palmtx_lcd_screen = { /****************************************************************************** * Power management - standby ******************************************************************************/ -#ifdef CONFIG_PM -static u32 *addr __initdata; -static u32 resume[3] __initdata = { - 0xe3a00101, /* mov r0, #0x40000000 */ - 0xe380060f, /* orr r0, r0, #0x00f00000 */ - 0xe590f008, /* ldr pc, [r0, #0x08] */ -}; - -static int __init palmtx_pm_init(void) +static void __init palmtx_pm_init(void) { - int i; - - /* this is where the bootloader jumps */ - addr = phys_to_virt(PALMTX_STR_BASE); - - for (i = 0; i < 3; i++) - addr[i] = resume[i]; - - return 0; + static u32 resume[] = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ + }; + + /* copy the bootloader */ + memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume)); } -device_initcall(palmtx_pm_init); -#endif - /****************************************************************************** * Machine init ******************************************************************************/ @@ -517,6 +513,7 @@ static struct platform_device *devices[] __initdata = { &palmtx_backlight, &power_supply, &palmtx_asoc, + &palmtx_gpio_vbus, }; static struct map_desc palmtx_io_desc[] __initdata = { @@ -548,11 +545,11 @@ static void __init palmtx_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config)); + palmtx_pm_init(); set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); palmtx_udc_init(); pxa_set_ac97_info(&palmtx_ac97_pdata); - pxa_set_udc_info(&palmtx_udc_info); pxa_set_ficp_info(&palmtx_ficp_platform_data); pxa_set_keypad_info(&palmtx_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6c12b5a3132f..095521e9ee24 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -28,7 +28,7 @@ #include <media/soc_camera.h> #include <asm/gpio.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/camera.h> #include <asm/mach/map.h> #include <mach/pxa27x.h> diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 884b174c8ead..7693355ee637 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -79,7 +79,7 @@ static int pxa_pm_valid(suspend_state_t state) return -EINVAL; } -static int pxa_pm_prepare(void) +int pxa_pm_prepare(void) { int ret = 0; @@ -89,7 +89,7 @@ static int pxa_pm_prepare(void) return ret; } -static void pxa_pm_finish(void) +void pxa_pm_finish(void) { if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish) pxa_cpu_pm_fns->finish(); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 036bbde4d221..ac431ed10399 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -39,7 +39,7 @@ #include <mach/pxa25x.h> #include <mach/mmc.h> #include <mach/udc.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> @@ -214,13 +214,8 @@ static struct ads7846_platform_data poodle_ads7846_info = { .gpio_pendown = POODLE_GPIO_TP_INT, }; -static void ads7846_cs(u32 command) -{ - gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip poodle_ads7846_chip = { - .cs_control = ads7846_cs, + .gpio_cs = POODLE_GPIO_TP_CS, }; static struct spi_board_info poodle_spi_devices[] = { @@ -236,14 +231,6 @@ static struct spi_board_info poodle_spi_devices[] = { static void __init poodle_init_spi(void) { - int err; - - err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS"); - if (err) - return; - - gpio_direction_output(POODLE_GPIO_TP_CS, 1); - pxa2xx_set_spi_info(1, &poodle_spi_info); spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices)); } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index a425ec71e657..ec68cc16b4e3 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -27,7 +27,7 @@ #include <mach/ohci.h> #include <mach/pm.h> #include <mach/dma.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include "generic.h" #include "devices.h" @@ -204,6 +204,23 @@ static struct clk_lookup pxa27x_clkregs[] = { #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] /* + * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM + */ +static unsigned int pwrmode = PWRMODE_SLEEP; + +int __init pxa27x_set_pwrmode(unsigned int mode) +{ + switch (mode) { + case PWRMODE_SLEEP: + case PWRMODE_DEEPSLEEP: + pwrmode = mode; + return 0; + } + + return -EINVAL; +} + +/* * List of global PXA peripheral registers to preserve. * More ones like CP and general purpose register values are preserved * with the stack pointer in sleep.S. @@ -254,7 +271,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - pxa27x_cpu_suspend(PWRMODE_SLEEP); + pxa27x_cpu_suspend(pwrmode); break; } } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index b02d4544dc95..6f678d93bf4e 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -30,7 +30,7 @@ #include <mach/pm.h> #include <mach/dma.h> #include <mach/ssp.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include "generic.h" #include "devices.h" @@ -552,7 +552,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { -/* &pxa_device_udc, The UDC driver is PXA25x only */ + &pxa27x_device_udc, &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index ff8239991430..8241a63ea589 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -27,7 +27,7 @@ #include <asm/mach/arch.h> #include <mach/pxa930.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/pxafb.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 047909a76651..55259f4756c8 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -7,7 +7,7 @@ * */ -#include <asm/hardware/sharpsl_pm.h> +#include <mach/sharpsl_pm.h> /* * SharpSL SSP Driver @@ -44,8 +44,6 @@ void corgi_lcdtg_hw_init(int mode); extern struct battery_thresh spitz_battery_levels_acin[]; extern struct battery_thresh spitz_battery_levels_noac[]; -void sharpsl_pm_pxa_init(void); -void sharpsl_pm_pxa_remove(void); int sharpsl_pm_pxa_read_max1111(int channel); diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 16b4ec67e3b6..2546c066cd6e 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -15,20 +15,69 @@ #undef DEBUG #include <linux/module.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/leds.h> +#include <linux/suspend.h> +#include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <mach/pm.h> +#include <mach/pxa2xx-regs.h> #include <mach/pxa2xx-gpio.h> +#include <mach/regs-rtc.h> #include <mach/sharpsl.h> +#include <mach/sharpsl_pm.h> + #include "sharpsl.h" +/* + * Constants + */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ +#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ +#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ + +#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ +#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ +#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ +#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ +#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ + +/* + * Prototypes + */ +#ifdef CONFIG_PM +static int sharpsl_off_charge_battery(void); +static int sharpsl_check_battery_voltage(void); +static int sharpsl_fatal_check(void); +#endif +static int sharpsl_check_battery_temp(void); +static int sharpsl_ac_check(void); +static int sharpsl_average_value(int ad); +static void sharpsl_average_clear(void); +static void sharpsl_charge_toggle(struct work_struct *private_); +static void sharpsl_battery_thread(struct work_struct *private_); + + +/* + * Variables + */ +struct sharpsl_pm_status sharpsl_pm; +static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle); +static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread); +DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); + + + struct battery_thresh spitz_battery_levels_acin[] = { { 213, 100}, { 212, 98}, @@ -144,42 +193,789 @@ int sharpsl_pm_pxa_read_max1111(int channel) #endif } -void sharpsl_pm_pxa_init(void) +static int get_percentage(int voltage) +{ + int i = sharpsl_pm.machinfo->bat_levels - 1; + int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0; + struct battery_thresh *thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) + thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin; + else + thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac; + + while (i > 0 && (voltage > thresh[i].voltage)) + i--; + + return thresh[i].percentage; +} + +static int get_apm_status(int voltage) +{ + int low_thresh, high_thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) { + high_thresh = sharpsl_pm.machinfo->status_high_acin; + low_thresh = sharpsl_pm.machinfo->status_low_acin; + } else { + high_thresh = sharpsl_pm.machinfo->status_high_noac; + low_thresh = sharpsl_pm.machinfo->status_low_noac; + } + + if (voltage >= high_thresh) + return APM_BATTERY_STATUS_HIGH; + if (voltage >= low_thresh) + return APM_BATTERY_STATUS_LOW; + return APM_BATTERY_STATUS_CRITICAL; +} + +void sharpsl_battery_kick(void) +{ + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); +} +EXPORT_SYMBOL(sharpsl_battery_kick); + + +static void sharpsl_battery_thread(struct work_struct *private_) +{ + int voltage, percent, apm_status, i = 0; + + if (!sharpsl_pm.machinfo) + return; + + sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE); + + /* Corgi cannot confirm when battery fully charged so periodically kick! */ + if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON) + && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) + schedule_delayed_work(&toggle_charger, 0); + + while(1) { + voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); + + if (voltage > 0) break; + if (i++ > 5) { + voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; + dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); + break; + } + } + + voltage = sharpsl_average_value(voltage); + apm_status = get_apm_status(voltage); + percent = get_percentage(voltage); + + /* At low battery voltages, the voltage has a tendency to start + creeping back up so we try to avoid this here */ + if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { + sharpsl_pm.battstat.mainbat_voltage = voltage; + sharpsl_pm.battstat.mainbat_status = apm_status; + sharpsl_pm.battstat.mainbat_percent = percent; + } + + dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage, + sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); + +#ifdef CONFIG_BACKLIGHT_CORGI + /* If battery is low. limit backlight intensity to save power. */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || + (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { + if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { + sharpsl_pm.machinfo->backlight_limit(1); + sharpsl_pm.flags |= SHARPSL_BL_LIMIT; + } + } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { + sharpsl_pm.machinfo->backlight_limit(0); + sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; + } +#endif + + /* Suspend if critical battery level */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) + && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + dev_err(sharpsl_pm.dev, "Fatal Off\n"); + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); +} + +void sharpsl_pm_led(int val) +{ + if (val == SHARPSL_LED_ERROR) { + dev_err(sharpsl_pm.dev, "Charging Error!\n"); + } else if (val == SHARPSL_LED_ON) { + dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); + led_trigger_event(sharpsl_charge_led_trigger, LED_FULL); + } else { + dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); + led_trigger_event(sharpsl_charge_led_trigger, LED_OFF); + } +} + +static void sharpsl_charge_on(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); + + sharpsl_pm.full_count = 0; + sharpsl_pm.charge_mode = CHRG_ON; + schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); +} + +static void sharpsl_charge_off(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); + + sharpsl_pm.machinfo->charge(0); + sharpsl_pm_led(SHARPSL_LED_OFF); + sharpsl_pm.charge_mode = CHRG_OFF; + + schedule_delayed_work(&sharpsl_bat, 0); +} + +static void sharpsl_charge_error(void) { - pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN); - pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN); - pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN); + sharpsl_pm_led(SHARPSL_LED_ERROR); + sharpsl_pm.machinfo->charge(0); + sharpsl_pm.charge_mode = CHRG_ERROR; +} + +static void sharpsl_charge_toggle(struct work_struct *private_) +{ + dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { + sharpsl_charge_off(); + return; + } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { + sharpsl_charge_error(); + return; + } + + sharpsl_pm_led(SHARPSL_LED_ON); + sharpsl_pm.machinfo->charge(0); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + sharpsl_pm.machinfo->charge(1); + + sharpsl_pm.charge_start_time = jiffies; +} + +static void sharpsl_ac_timer(unsigned long data) +{ + int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); + + dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); + + sharpsl_average_clear(); + if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) + sharpsl_charge_on(); + else if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + + schedule_delayed_work(&sharpsl_bat, 0); +} + + +static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id) +{ + /* Delay the event slightly to debounce */ + /* Must be a smaller delay than the chrg_full_isr below */ + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static void sharpsl_chrg_full_timer(unsigned long data) +{ + dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); + + sharpsl_pm.full_count++; + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { + dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + } else if (sharpsl_pm.full_count < 2) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); + schedule_delayed_work(&toggle_charger, 0); + } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); + schedule_delayed_work(&toggle_charger, 0); + } else { + sharpsl_charge_off(); + sharpsl_pm.charge_mode = CHRG_DONE; + dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); + } +} + +/* Charging Finished Interrupt (Not present on Corgi) */ +/* Can trigger at the same time as an AC status change so + delay until after that has been processed */ +static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id) +{ + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) + return IRQ_HANDLED; + + /* delay until after any ac interrupt */ + mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + +static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id) +{ + int is_fatal = 0; + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) { + dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); + is_fatal = 1; + } + + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) { + dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); + is_fatal = 1; + } + + if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + return IRQ_HANDLED; +} + +/* + * Maintain an average of the last 10 readings + */ +#define SHARPSL_CNV_VALUE_NUM 10 +static int sharpsl_ad_index; + +static void sharpsl_average_clear(void) +{ + sharpsl_ad_index = 0; +} + +static int sharpsl_average_value(int ad) +{ + int i, ad_val = 0; + static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; + + if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { + sharpsl_ad_index = 0; + return ad; + } + + sharpsl_ad[sharpsl_ad_index] = ad; + sharpsl_ad_index++; + if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { + for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) + sharpsl_ad[i] = sharpsl_ad[i+1]; + sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; + } + for (i=0; i < sharpsl_ad_index; i++) + ad_val += sharpsl_ad[i]; + + return (ad_val / sharpsl_ad_index); +} + +/* + * Take an array of 5 integers, remove the maximum and minimum values + * and return the average. + */ +static int get_select_val(int *val) +{ + int i, j, k, temp, sum = 0; + + /* Find MAX val */ + temp = val[0]; + j=0; + for (i=1; i<5; i++) { + if (temp < val[i]) { + temp = val[i]; + j = i; + } + } + + /* Find MIN val */ + temp = val[4]; + k=4; + for (i=3; i>=0; i--) { + if (temp > val[i]) { + temp = val[i]; + k = i; + } + } + + for (i=0; i<5; i++) + if (i != j && i != k ) + sum += val[i]; + + dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); + + return (sum/3); +} + +static int sharpsl_check_battery_temp(void) +{ + int val, i, buff[5]; + + /* Check battery temperature */ + for (i=0; i<5; i++) { + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + sharpsl_pm.machinfo->measure_temp(1); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP); + sharpsl_pm.machinfo->measure_temp(0); + } + + val = get_select_val(buff); + + dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); + if (val > sharpsl_pm.machinfo->charge_on_temp) { + printk(KERN_WARNING "Not charging: temperature out of limits.\n"); + return -1; + } + + return 0; +} + +#ifdef CONFIG_PM +static int sharpsl_check_battery_voltage(void) +{ + int val, i, buff[5]; + + /* disable charge, enable discharge */ + sharpsl_pm.machinfo->charge(0); + sharpsl_pm.machinfo->discharge(1); + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery voltage */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + sharpsl_pm.machinfo->discharge(0); + + val = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); + + if (val < sharpsl_pm.machinfo->charge_on_volt) + return -1; + + return 0; +} +#endif + +static int sharpsl_ac_check(void) +{ + int temp, i, buff[5]; + + for (i=0; i<5; i++) { + buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); + + if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) { + dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); + return -1; + } + + return 0; +} + +#ifdef CONFIG_PM +static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) +{ + sharpsl_pm.flags |= SHARPSL_SUSPENDED; + flush_scheduled_work(); + + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + else + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + + return 0; +} + +static int sharpsl_pm_resume(struct platform_device *pdev) +{ + /* Clear the reset source indicators as they break the bootloader upon reboot */ + RCSR = 0x0f; + sharpsl_average_clear(); + sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; + sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; + + return 0; +} + +static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); + + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + /* not charging and AC-IN! */ + + if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) { + dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + sharpsl_off_charge_battery(); + } + + sharpsl_pm.machinfo->presuspend(); + + PEDR = 0xffffffff; /* clear it */ + + sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; + if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { + RTSR &= RTSR_ALE; + RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; + dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); + sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; + } else if (alarm_enable) { + RTSR &= RTSR_ALE; + RTAR = alarm_time; + dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); + } else { + dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); + } + + pxa_pm_enter(state); + + sharpsl_pm.machinfo->postsuspend(); + + dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); +} + +static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) + { + if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { + dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + if(sharpsl_off_charge_battery()) { + dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); + } + + if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) ) + { + dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + + return 0; +} + +static int corgi_pxa_pm_enter(suspend_state_t state) +{ + unsigned long alarm_time = RTAR; + unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); + + dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); + + corgi_goto_sleep(alarm_time, alarm_status, state); + + while (corgi_enter_suspend(alarm_time,alarm_status,state)) + {} + + if (sharpsl_pm.machinfo->earlyresume) + sharpsl_pm.machinfo->earlyresume(); + + dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); + + return 0; +} + +/* + * Check for fatal battery errors + * Fatal returns -1 + */ +static int sharpsl_fatal_check(void) +{ + int buff[5], temp, i, acin; + + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); + + /* Check AC-Adapter */ + acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + sharpsl_pm.machinfo->charge(0); + udelay(100); + sharpsl_pm.machinfo->discharge(1); /* enable discharge */ + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery : check inserting battery ? */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + udelay(100); + sharpsl_pm.machinfo->charge(1); + sharpsl_pm.machinfo->discharge(0); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); + + if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || + (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) + return -1; + return 0; +} + +static int sharpsl_off_charge_error(void) +{ + dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n"); + sharpsl_pm.machinfo->charge(0); + sharpsl_pm_led(SHARPSL_LED_ERROR); + sharpsl_pm.charge_mode = CHRG_ERROR; + return 1; +} + +/* + * Charging Control while suspended + * Return 1 - go straight to sleep + * Return 0 - sleep or wakeup depending on other factors + */ +static int sharpsl_off_charge_battery(void) +{ + int time; + + dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); + + if (sharpsl_pm.charge_mode == CHRG_OFF) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); + + /* AC Check */ + if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) + return sharpsl_off_charge_error(); + + /* Start Charging */ + sharpsl_pm_led(SHARPSL_LED_ON); + sharpsl_pm.machinfo->charge(0); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + sharpsl_pm.machinfo->charge(1); + + sharpsl_pm.charge_mode = CHRG_ON; + sharpsl_pm.full_count = 0; + + return 1; + } else if (sharpsl_pm.charge_mode != CHRG_ON) { + return 1; + } + + if (sharpsl_pm.full_count == 0) { + int time; + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); + + if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) + return sharpsl_off_charge_error(); + + sharpsl_pm.machinfo->charge(0); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + sharpsl_pm.machinfo->charge(1); + sharpsl_pm.charge_mode = CHRG_ON; + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occurred */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) + return 1; + if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n"); + sharpsl_pm.full_count++; + sharpsl_pm.machinfo->charge(0); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + sharpsl_pm.machinfo->charge(1); + return 1; + } + } + } + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occurred */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { + if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); + sharpsl_pm.full_count = 0; + } + sharpsl_pm.full_count++; + return 1; + } + if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); + sharpsl_pm_led(SHARPSL_LED_OFF); + sharpsl_pm.machinfo->charge(0); + sharpsl_pm.charge_mode = CHRG_DONE; + return 1; + } + } +} +#else +#define sharpsl_pm_suspend NULL +#define sharpsl_pm_resume NULL +#endif + +static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); +} + +static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); +} + +static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); +static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); + +extern void (*apm_get_power_status)(struct apm_power_info *); + +static void sharpsl_apm_get_power_status(struct apm_power_info *info) +{ + info->ac_line_status = sharpsl_pm.battstat.ac_status; + + if (sharpsl_pm.charge_mode == CHRG_ON) + info->battery_status = APM_BATTERY_STATUS_CHARGING; + else + info->battery_status = sharpsl_pm.battstat.mainbat_status; + + info->battery_flag = (1 << info->battery_status); + info->battery_life = sharpsl_pm.battstat.mainbat_percent; +} + +#ifdef CONFIG_PM +static struct platform_suspend_ops sharpsl_pm_ops = { + .prepare = pxa_pm_prepare, + .finish = pxa_pm_finish, + .enter = corgi_pxa_pm_enter, + .valid = suspend_valid_only_mem, +}; +#endif + +static int __init sharpsl_pm_probe(struct platform_device *pdev) +{ + int ret; + + if (!pdev->dev.platform_data) + return -EINVAL; + + sharpsl_pm.dev = &pdev->dev; + sharpsl_pm.machinfo = pdev->dev.platform_data; + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags = 0; + + init_timer(&sharpsl_pm.ac_timer); + sharpsl_pm.ac_timer.function = sharpsl_ac_timer; + + init_timer(&sharpsl_pm.chrg_full_timer); + sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; + + led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger); + + sharpsl_pm.machinfo->init(); + + gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN"); + gpio_direction_input(sharpsl_pm.machinfo->gpio_acin); + gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full"); + gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull); + gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock"); + gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock); /* Register interrupt handlers */ - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) { + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH); - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) { + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING); if (sharpsl_pm.machinfo->gpio_fatal) { - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) { + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING); } if (sharpsl_pm.machinfo->batfull_irq) { /* Register interrupt handler. */ - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) { + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING); } + + ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage); + ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage); + if (ret != 0) + dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret); + + apm_get_power_status = sharpsl_apm_get_power_status; + +#ifdef CONFIG_PM + suspend_set_ops(&sharpsl_pm_ops); +#endif + + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return 0; } -void sharpsl_pm_pxa_remove(void) +static int sharpsl_pm_remove(struct platform_device *pdev) { + suspend_set_ops(NULL); + + device_remove_file(&pdev->dev, &dev_attr_battery_percentage); + device_remove_file(&pdev->dev, &dev_attr_battery_voltage); + + led_trigger_unregister_simple(sharpsl_charge_led_trigger); + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); @@ -188,4 +984,39 @@ void sharpsl_pm_pxa_remove(void) if (sharpsl_pm.machinfo->batfull_irq) free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); + + gpio_free(sharpsl_pm.machinfo->gpio_batlock); + gpio_free(sharpsl_pm.machinfo->gpio_batfull); + gpio_free(sharpsl_pm.machinfo->gpio_acin); + + if (sharpsl_pm.machinfo->exit) + sharpsl_pm.machinfo->exit(); + + del_timer_sync(&sharpsl_pm.chrg_full_timer); + del_timer_sync(&sharpsl_pm.ac_timer); + + return 0; } + +static struct platform_driver sharpsl_pm_driver = { + .probe = sharpsl_pm_probe, + .remove = sharpsl_pm_remove, + .suspend = sharpsl_pm_suspend, + .resume = sharpsl_pm_resume, + .driver = { + .name = "sharpsl-pm", + }, +}; + +static int __devinit sharpsl_pm_init(void) +{ + return platform_driver_register(&sharpsl_pm_driver); +} + +static void sharpsl_pm_exit(void) +{ + platform_driver_unregister(&sharpsl_pm_driver); +} + +late_initcall(sharpsl_pm_init); +module_exit(sharpsl_pm_exit); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 5a45fe340a10..dda310fe71c8 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -13,19 +13,11 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/major.h> -#include <linux/fs.h> -#include <linux/interrupt.h> #include <linux/gpio.h> #include <linux/leds.h> -#include <linux/mmc/host.h> #include <linux/mtd/physmap.h> -#include <linux/pm.h> -#include <linux/backlight.h> -#include <linux/io.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> #include <linux/spi/spi.h> @@ -34,31 +26,22 @@ #include <linux/mtd/sharpsl.h> #include <asm/setup.h> -#include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/system.h> - #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> +#include <asm/mach/sharpsl_param.h> +#include <asm/hardware/scoop.h> + #include <mach/pxa27x.h> #include <mach/pxa27x-udc.h> #include <mach/reset.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <mach/udc.h> #include <mach/pxafb.h> #include <mach/pxa2xx_spi.h> #include <mach/spitz.h> -#include <mach/sharpsl.h> - -#include <asm/mach/sharpsl_param.h> -#include <asm/hardware/scoop.h> #include "generic.h" #include "devices.h" @@ -317,13 +300,8 @@ static struct ads7846_platform_data spitz_ads7846_info = { .wait_for_sync = spitz_wait_for_hsync, }; -static void spitz_ads7846_cs(u32 command) -{ - gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip spitz_ads7846_chip = { - .cs_control = spitz_ads7846_cs, + .gpio_cs = SPITZ_GPIO_ADS7846_CS, }; static void spitz_bl_kick_battery(void) @@ -347,22 +325,12 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = { .kick_battery = spitz_bl_kick_battery, }; -static void spitz_lcdcon_cs(u32 command) -{ - gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip spitz_lcdcon_chip = { - .cs_control = spitz_lcdcon_cs, + .gpio_cs = SPITZ_GPIO_LCDCON_CS, }; -static void spitz_max1111_cs(u32 command) -{ - gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT)); -} - static struct pxa2xx_spi_chip spitz_max1111_chip = { - .cs_control = spitz_max1111_cs, + .gpio_cs = SPITZ_GPIO_MAX1111_CS, }; static struct spi_board_info spitz_spi_devices[] = { @@ -392,30 +360,6 @@ static struct spi_board_info spitz_spi_devices[] = { static void __init spitz_init_spi(void) { - int err; - - err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS"); - if (err) - return; - - err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS"); - if (err) - goto err_free_1; - - err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS"); - if (err) - goto err_free_2; - - err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1); - if (err) - goto err_free_3; - err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1); - if (err) - goto err_free_3; - err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1); - if (err) - goto err_free_3; - if (machine_is_akita()) { spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; @@ -423,14 +367,6 @@ static void __init spitz_init_spi(void) pxa2xx_set_spi_info(2, &spitz_spi_info); spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); - return; - -err_free_3: - gpio_free(SPITZ_GPIO_MAX1111_CS); -err_free_2: - gpio_free(SPITZ_GPIO_LCDCON_CS); -err_free_1: - gpio_free(SPITZ_GPIO_ADS7846_CS); } #else static inline void spitz_init_spi(void) {} diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 2e4490562c9e..724ffb030317 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -41,7 +41,6 @@ static void spitz_charger_init(void) { pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); - sharpsl_pm_pxa_init(); } static void spitz_measure_temp(int on) @@ -182,7 +181,7 @@ unsigned long spitzpm_read_devdata(int type) struct sharpsl_charger_machinfo spitz_pm_machinfo = { .init = spitz_charger_init, - .exit = sharpsl_pm_pxa_remove, + .exit = NULL, .gpio_batlock = SPITZ_GPIO_BAT_COVER, .gpio_acin = SPITZ_GPIO_AC_IN, .gpio_batfull = SPITZ_GPIO_CHRG_FULL, diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c new file mode 100644 index 000000000000..3b205b69f3fb --- /dev/null +++ b/arch/arm/mach-pxa/stargate2.c @@ -0,0 +1,796 @@ +/* + * linux/arch/arm/mach-pxa/stargate2.c + * + * Author: Ed C. Epp + * Created: Nov 05, 2002 + * Copyright: Intel Corp. + * + * Modified 2009: Jonathan Cameron <jic23@cam.ac.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/bitops.h> +#include <linux/fb.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/regulator/machine.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/plat-ram.h> +#include <linux/mtd/partitions.h> + +#include <linux/i2c/pcf857x.h> +#include <linux/i2c/at24.h> +#include <linux/smc91x.h> +#include <linux/gpio.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> + +#include <mach/pxa27x.h> +#include <plat/i2c.h> +#include <mach/mmc.h> +#include <mach/udc.h> +#include <mach/pxa2xx_spi.h> +#include <mach/pxa27x-udc.h> + +#include <linux/spi/spi.h> +#include <linux/mfd/da903x.h> +#include <linux/sht15.h> + +#include "devices.h" +#include "generic.h" + +/* Bluetooth */ +#define SG2_BT_RESET 81 + +/* SD */ +#define SG2_GPIO_nSD_DETECT 90 +#define SG2_SD_POWER_ENABLE 89 + +static unsigned long stargate2_pin_config[] __initdata = { + + GPIO15_nCS_1, /* SRAM */ + /* SMC91x */ + GPIO80_nCS_4, + GPIO40_GPIO, /*cable detect?*/ + /* Device Identification for wakeup*/ + GPIO102_GPIO, + + /* Button */ + GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH, + + /* DA9030 */ + GPIO1_GPIO, + + /* Compact Flash */ + GPIO79_PSKTSEL, + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO120_GPIO, /* Buff ctrl */ + GPIO108_GPIO, /* Power ctrl */ + GPIO82_GPIO, /* Reset */ + GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO90_GPIO, /* nSD detect */ + GPIO89_GPIO, /* SD_POWER_ENABLE */ + + /* Bluetooth */ + GPIO81_GPIO, /* reset */ + + /* cc2420 802.15.4 radio */ + GPIO22_GPIO, /* CC_RSTN (out)*/ + GPIO114_GPIO, /* CC_FIFO (in) */ + GPIO116_GPIO, /* CC_CCA (in) */ + GPIO0_GPIO, /* CC_FIFOP (in) */ + GPIO16_GPIO, /* CCSFD (in) */ + GPIO39_GPIO, /* CSn (out) */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* SSP 3 - 802.15.4 radio */ + GPIO39_GPIO, /* chip select */ + GPIO34_SSP3_SCLK, + GPIO35_SSP3_TXD, + GPIO41_SSP3_RXD, + + /* SSP 2 */ + GPIO11_SSP2_RXD, + GPIO38_SSP2_TXD, + GPIO36_SSP2_SCLK, + GPIO37_GPIO, /* chip select */ + + /* SSP 1 */ + GPIO26_SSP1_RXD, + GPIO25_SSP1_TXD, + GPIO23_SSP1_SCLK, + GPIO24_GPIO, /* chip select */ + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* Basic sensor board */ + GPIO96_GPIO, /* accelerometer interrupt */ + GPIO99_GPIO, /* ADC interrupt */ + + /* Connector pins specified as gpios */ + GPIO94_GPIO, /* large basic connector pin 14 */ + GPIO10_GPIO, /* large basic connector pin 23 */ + + /* SHT15 */ + GPIO100_GPIO, + GPIO98_GPIO, +}; + +/** + * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state + **/ +static int stargate2_reset_bluetooth(void) +{ + int err; + err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET"); + if (err) { + printk(KERN_ERR "Could not get gpio for bluetooth reset \n"); + return err; + } + gpio_direction_output(SG2_BT_RESET, 1); + mdelay(5); + /* now reset it - 5 msec minimum */ + gpio_set_value(SG2_BT_RESET, 0); + mdelay(10); + gpio_set_value(SG2_BT_RESET, 1); + gpio_free(SG2_BT_RESET); + return 0; +} + +static struct led_info stargate2_leds[] = { + { + .name = "sg2:red", + .flags = DA9030_LED_RATE_ON, + }, { + .name = "sg2:blue", + .flags = DA9030_LED_RATE_ON, + }, { + .name = "sg2:green", + .flags = DA9030_LED_RATE_ON, + }, +}; + +static struct sht15_platform_data platform_data_sht15 = { + .gpio_data = 100, + .gpio_sck = 98, +}; + +static struct platform_device sht15 = { + .name = "sht15", + .id = -1, + .dev = { + .platform_data = &platform_data_sht15, + }, +}; + +static struct regulator_consumer_supply stargate2_sensor_3_con[] = { + { + .dev = &sht15.dev, + .supply = "vcc", + }, +}; + +enum stargate2_ldos{ + vcc_vref, + vcc_cc2420, + /* a mote connector? */ + vcc_mica, + /* the CSR bluecore chip */ + vcc_bt, + /* The two voltages available to sensor boards */ + vcc_sensor_1_8, + vcc_sensor_3, + /* directly connected to the pxa27x */ + vcc_sram_ext, + vcc_pxa_pll, + vcc_pxa_usim, /* Reference voltage for certain gpios */ + vcc_pxa_mem, + vcc_pxa_flash, + vcc_pxa_core, /*Dc-Dc buck not yet supported */ + vcc_lcd, + vcc_bb, + vcc_bbio, /*not sure!*/ + vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/ +}; + +/* The values of the various regulator constraints are obviously dependent + * on exactly what is wired to each ldo. Unfortunately this information is + * not generally available. More information has been requested from Xbow. + */ +static struct regulator_init_data stargate2_ldo_init_data[] = { + [vcc_bbio] = { + .constraints = { /* board default 1.8V */ + .name = "vcc_bbio", + .min_uV = 1800000, + .max_uV = 1800000, + }, + }, + [vcc_bb] = { + .constraints = { /* board default 2.8V */ + .name = "vcc_bb", + .min_uV = 2700000, + .max_uV = 3000000, + }, + }, + [vcc_pxa_flash] = { + .constraints = {/* default is 1.8V */ + .name = "vcc_pxa_flash", + .min_uV = 1800000, + .max_uV = 1800000, + }, + }, + [vcc_cc2420] = { /* also vcc_io */ + .constraints = { + /* board default is 2.8V */ + .name = "vcc_cc2420", + .min_uV = 2700000, + .max_uV = 3300000, + }, + }, + [vcc_vref] = { /* Reference for what? */ + .constraints = { /* default 1.8V */ + .name = "vcc_vref", + .min_uV = 1800000, + .max_uV = 1800000, + }, + }, + [vcc_sram_ext] = { + .constraints = { /* default 2.8V */ + .name = "vcc_sram_ext", + .min_uV = 2800000, + .max_uV = 2800000, + }, + }, + [vcc_mica] = { + .constraints = { /* default 2.8V */ + .name = "vcc_mica", + .min_uV = 2800000, + .max_uV = 2800000, + }, + }, + [vcc_bt] = { + .constraints = { /* default 2.8V */ + .name = "vcc_bt", + .min_uV = 2800000, + .max_uV = 2800000, + }, + }, + [vcc_lcd] = { + .constraints = { /* default 2.8V */ + .name = "vcc_lcd", + .min_uV = 2700000, + .max_uV = 3300000, + }, + }, + [vcc_io] = { /* Same or higher than everything + * bar vccbat and vccusb */ + .constraints = { /* default 2.8V */ + .name = "vcc_io", + .min_uV = 2692000, + .max_uV = 3300000, + }, + }, + [vcc_sensor_1_8] = { + .constraints = { /* default 1.8V */ + .name = "vcc_sensor_1_8", + .min_uV = 1800000, + .max_uV = 1800000, + }, + }, + [vcc_sensor_3] = { /* curiously default 2.8V */ + .constraints = { + .name = "vcc_sensor_3", + .min_uV = 2800000, + .max_uV = 3000000, + }, + .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con), + .consumer_supplies = stargate2_sensor_3_con, + }, + [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/ + .constraints = { + .name = "vcc_pxa_pll", + .min_uV = 1170000, + .max_uV = 1430000, + }, + }, + [vcc_pxa_usim] = { + .constraints = { /* default 1.8V */ + .name = "vcc_pxa_usim", + .min_uV = 1710000, + .max_uV = 2160000, + }, + }, + [vcc_pxa_mem] = { + .constraints = { /* default 1.8V */ + .name = "vcc_pxa_mem", + .min_uV = 1800000, + .max_uV = 1800000, + }, + }, +}; + +static struct da903x_subdev_info stargate2_da9030_subdevs[] = { + { + .name = "da903x-led", + .id = DA9030_ID_LED_2, + .platform_data = &stargate2_leds[0], + }, { + .name = "da903x-led", + .id = DA9030_ID_LED_3, + .platform_data = &stargate2_leds[2], + }, { + .name = "da903x-led", + .id = DA9030_ID_LED_4, + .platform_data = &stargate2_leds[1], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO2, + .platform_data = &stargate2_ldo_init_data[vcc_bbio], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO3, + .platform_data = &stargate2_ldo_init_data[vcc_bb], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO4, + .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO5, + .platform_data = &stargate2_ldo_init_data[vcc_cc2420], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO6, + .platform_data = &stargate2_ldo_init_data[vcc_vref], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO7, + .platform_data = &stargate2_ldo_init_data[vcc_sram_ext], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO8, + .platform_data = &stargate2_ldo_init_data[vcc_mica], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO9, + .platform_data = &stargate2_ldo_init_data[vcc_bt], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO10, + .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO11, + .platform_data = &stargate2_ldo_init_data[vcc_sensor_3], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO12, + .platform_data = &stargate2_ldo_init_data[vcc_lcd], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO15, + .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO17, + .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim], + }, { + .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */ + .id = DA9030_ID_LDO18, + .platform_data = &stargate2_ldo_init_data[vcc_io], + }, { + .name = "da903x-regulator", + .id = DA9030_ID_LDO19, + .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem], + }, +}; + +static struct da903x_platform_data stargate2_da9030_pdata = { + .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs), + .subdevs = stargate2_da9030_subdevs, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = (PXA_CS4_PHYS + 0x300), + .end = (PXA_CS4_PHYS + 0xfffff), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_GPIO(40), + .end = IRQ_GPIO(40), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct smc91x_platdata stargate2_smc91x_info = { + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT + | SMC91X_NOWAIT | SMC91X_USE_DMA, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, + .dev = { + .platform_data = &stargate2_smc91x_info, + }, +}; + + + +static struct pxamci_platform_data stargate2_mci_platform_data; + +/* + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert / eject. + */ +static int stargate2_mci_init(struct device *dev, + irq_handler_t stargate2_detect_int, + void *data) +{ + int err; + + err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable"); + if (err) { + printk(KERN_ERR "Can't get the gpio for SD power control"); + goto return_err; + } + gpio_direction_output(SG2_SD_POWER_ENABLE, 0); + + err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect"); + if (err) { + printk(KERN_ERR "Can't get the sd detect gpio"); + goto free_power_en; + } + gpio_direction_input(SG2_GPIO_nSD_DETECT); + /* Delay to allow for full insertion */ + stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), + stargate2_detect_int, + IRQ_TYPE_EDGE_BOTH, + "MMC card detect", + data); + if (err) { + printk(KERN_ERR "can't request MMC card detect IRQ\n"); + goto free_nsd_detect; + } + return 0; + + free_nsd_detect: + gpio_free(SG2_GPIO_nSD_DETECT); + free_power_en: + gpio_free(SG2_SD_POWER_ENABLE); + return_err: + return err; +} + +/** + * stargate2_mci_setpower() - set state of mmc power supply + * + * Very simple control. Either it is on or off and is controlled by + * a gpio pin */ +static void stargate2_mci_setpower(struct device *dev, unsigned int vdd) +{ + gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd); +} + +static void stargate2_mci_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data); + gpio_free(SG2_SD_POWER_ENABLE); + gpio_free(SG2_GPIO_nSD_DETECT); +} + +static struct pxamci_platform_data stargate2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .init = stargate2_mci_init, + .setpower = stargate2_mci_setpower, + .exit = stargate2_mci_exit, +}; + +static struct mtd_partition stargate2flash_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = 0, + }, { + .name = "Kernel", + .size = 0x00200000, + .offset = 0x00040000, + .mask_flags = 0 + }, { + .name = "Filesystem", + .size = 0x01DC0000, + .offset = 0x00240000, + .mask_flags = 0 + }, +}; + +static struct resource flash_resources = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct flash_platform_data stargate2_flash_data = { + .map_name = "cfi_probe", + .parts = stargate2flash_partitions, + .nr_parts = ARRAY_SIZE(stargate2flash_partitions), + .name = "PXA27xOnChipROM", + .width = 2, +}; + +static struct platform_device stargate2_flash_device = { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &stargate2_flash_data, + }, + .resource = &flash_resources, + .num_resources = 1, +}; + +/* + * SRAM - The Stargate 2 has 32MB of SRAM. + * + * Here it is made available as an MTD. This will then + * typically have a cifs filesystem created on it to provide + * fast temporary storage. + */ +static struct resource sram_resources = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + SZ_32M-1, + .flags = IORESOURCE_MEM, +}; + +static struct platdata_mtd_ram stargate2_sram_pdata = { + .mapname = "Stargate2 SRAM", + .bankwidth = 2, +}; + +static struct platform_device stargate2_sram = { + .name = "mtd-ram", + .id = 0, + .resource = &sram_resources, + .num_resources = 1, + .dev = { + .platform_data = &stargate2_sram_pdata, + }, +}; + +static struct pcf857x_platform_data platform_data_pcf857x = { + .gpio_base = 128, + .n_latch = 0, + .setup = NULL, + .teardown = NULL, + .context = NULL, +}; + +static struct at24_platform_data pca9500_eeprom_pdata = { + .byte_len = 256, + .page_size = 4, +}; + + +static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { + /* Techically this a pca9500 - but it's compatible with the 8574 + * for gpio expansion and the 24c02 for eeprom access. + */ + { + .type = "pcf8574", + .addr = 0x27, + .platform_data = &platform_data_pcf857x, + }, { + .type = "24c02", + .addr = 0x57, + .platform_data = &pca9500_eeprom_pdata, + }, { + .type = "max1238", + .addr = 0x35, + }, { /* ITS400 Sensor board only */ + .type = "max1363", + .addr = 0x34, + /* Through a nand gate - Also beware, on V2 sensor board the + * pull up resistors are missing. + */ + .irq = IRQ_GPIO(99), + }, { /* ITS400 Sensor board only */ + .type = "tsl2561", + .addr = 0x49, + /* Through a nand gate - Also beware, on V2 sensor board the + * pull up resistors are missing. + */ + .irq = IRQ_GPIO(99), + }, { /* ITS400 Sensor board only */ + .type = "tmp175", + .addr = 0x4A, + .irq = IRQ_GPIO(96), + }, +}; + +static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = { + { + .type = "da9030", + .addr = 0x49, + .platform_data = &stargate2_da9030_pdata, + .irq = gpio_to_irq(1), + }, +}; + +static struct pxa2xx_spi_master pxa_ssp_master_0_info = { + .num_chipselect = 1, +}; + +static struct pxa2xx_spi_master pxa_ssp_master_1_info = { + .num_chipselect = 1, +}; + +static struct pxa2xx_spi_master pxa_ssp_master_2_info = { + .num_chipselect = 1, +}; + +/* An upcoming kernel change will scrap SFRM usage so these + * drivers have been moved to use gpio's via cs_control */ +static struct pxa2xx_spi_chip staccel_chip_info = { + .tx_threshold = 8, + .rx_threshold = 8, + .dma_burst_size = 8, + .timeout = 235, + .gpio_cs = 24, +}; + +static struct pxa2xx_spi_chip cc2420_info = { + .tx_threshold = 8, + .rx_threshold = 8, + .dma_burst_size = 8, + .timeout = 235, + .gpio_cs = 39, +}; + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "lis3l02dq", + .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */ + .bus_num = 1, + .chip_select = 0, + .controller_data = &staccel_chip_info, + .irq = IRQ_GPIO(96), + }, { + .modalias = "cc2420", + .max_speed_hz = 6500000, + .bus_num = 3, + .chip_select = 0, + .controller_data = &cc2420_info, + }, +}; + +static void sg2_udc_command(int cmd) +{ + switch (cmd) { + case PXA2XX_UDC_CMD_CONNECT: + UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE; + break; + case PXA2XX_UDC_CMD_DISCONNECT: + UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE); + break; + } +} + +/* Board doesn't support cable detection - so always lie and say + * something is there. + */ +static int sg2_udc_detect(void) +{ + return 1; +} + +static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = { + .udc_is_connected = sg2_udc_detect, + .udc_command = sg2_udc_command, +}; + +static struct platform_device *stargate2_devices[] = { + &stargate2_flash_device, + &stargate2_sram, + &smc91x_device, + &sht15, +}; + +static struct i2c_pxa_platform_data i2c_pwr_pdata = { + .fast_mode = 1, +}; + +static struct i2c_pxa_platform_data i2c_pdata = { + .fast_mode = 1, +}; + +static void __init stargate2_init(void) +{ + /* This is probably a board specific hack as this must be set + prior to connecting the MFP stuff up. */ + MECR &= ~MECR_NOS; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config)); + + /* spi chip selects */ + gpio_direction_output(37, 0); + gpio_direction_output(24, 0); + gpio_direction_output(39, 0); + + platform_add_devices(ARRAY_AND_SIZE(stargate2_devices)); + + pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); + pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info); + pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info)); + i2c_register_board_info(1, + ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info)); + pxa27x_set_i2c_power_info(&i2c_pwr_pdata); + pxa_set_i2c_info(&i2c_pdata); + + pxa_set_mci_info(&stargate2_mci_platform_data); + + pxa_set_udc_info(&stargate2_udc_info); + + stargate2_reset_bluetooth(); +} + +MACHINE_START(STARGATE2, "Stargate 2") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = stargate2_init, + .boot_params = 0xA0000100, +MACHINE_END diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index a0bd46ef5d30..168267a5dfb3 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -40,7 +40,7 @@ #include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/tosa_bt.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index f79c9cb70ae4..825f540176d2 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -47,7 +47,7 @@ #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index dd031cc41847..d33c232b686c 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -45,7 +45,7 @@ #include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/regs-uart.h> #include <mach/viper.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index c256c57642c0..cefd1c0a854a 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -21,7 +21,7 @@ #include <linux/gpio.h> #include <mach/pxa300.h> -#include <mach/i2c.h> +#include <plat/i2c.h> #include <mach/zylonite.h> #include "generic.h" diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index b6ec10627776..d4cfa2145386 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP config REALVIEW_EB_ARM11MP_REVB bool "Support ARM11MPCore RevB tile" depends on REALVIEW_EB_ARM11MP - default n help Enable support for the ARM11MPCore RevB tile on the Realview platform. Since there are device address differences, a @@ -48,6 +47,15 @@ config MACH_REALVIEW_PB1176 help Include support for the ARM(R) RealView ARM1176 Platform Baseboard. +config REALVIEW_PB1176_SECURE_FLASH + bool "Allow access to the secure flash memory block" + depends on MACH_REALVIEW_PB1176 + default n + help + Select this option if Linux will only run in secure mode on the + RealView PB1176 platform and access to the secure flash memory + block (64MB @ 0x3c000000) is required. + config MACH_REALVIEW_PBA8 bool "Support RealView/PB-A8 platform" select CPU_V7 @@ -58,6 +66,13 @@ config MACH_REALVIEW_PBA8 PB-A8 is a platform with an on-board Cortex-A8 and has support for PCI-E and Compact Flash. +config MACH_REALVIEW_PBX + bool "Support RealView/PBX platform" + select ARM_GIC + select HAVE_PATA_PLATFORM + help + Include support for the ARM(R) RealView PBX platform. + config REALVIEW_HIGH_PHYS_OFFSET bool "High physical base address for the RealView platform" depends on !MACH_REALVIEW_PB1176 diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 7bea8ffc4b59..e704edb733c0 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -7,5 +7,7 @@ obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o +obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 076acbc50706..9ea9c05093cd 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -48,6 +48,9 @@ #include <asm/hardware/gic.h> +#include <mach/platform.h> +#include <mach/irqs.h> + #include "core.h" #include "clock.h" @@ -578,21 +581,22 @@ void realview_leds_event(led_event_t ledevt) { unsigned long flags; u32 val; + u32 led = 1 << smp_processor_id(); local_irq_save(flags); val = readl(VA_LEDS_BASE); switch (ledevt) { case led_idle_start: - val = val & ~REALVIEW_SYS_LED0; + val = val & ~led; break; case led_idle_end: - val = val | REALVIEW_SYS_LED0; + val = val | led; break; case led_timer: - val = val ^ REALVIEW_SYS_LED1; + val = val ^ REALVIEW_SYS_LED7; break; case led_halted: diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 21c08637683b..59a337ba4be7 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data; extern struct mmc_platform_data realview_mmc1_plat_data; extern struct clcd_board clcd_plat_data; extern void __iomem *gic_cpu_base_addr; -#ifdef CONFIG_LOCAL_TIMERS -extern void __iomem *twd_base; -#endif extern void __iomem *timer0_va_base; extern void __iomem *timer1_va_base; extern void __iomem *timer2_va_base; diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 268d7701fa9b..794a8d91a6a6 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -62,111 +62,6 @@ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ #endif -#define IRQ_EB_GIC_START 32 - -/* - * RealView EB interrupt sources - */ -#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ -#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ -#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ -#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ -#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ -#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ -#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ -#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ -#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ -#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ -#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ -#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ -#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ -#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ -#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ -#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ - -/* - * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) - */ -#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) -#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) -#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) -#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) -#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) -#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) -#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) -#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) -#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) -#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) -#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ -#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ -#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ -#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ -#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) -#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) - -#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) -#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) -#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) -#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) -#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) -#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) -#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) -#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) -#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) -#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) -#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) -#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) - -#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) -#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) -#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) - -#define IRQ_EB11MP_UART2 -1 -#define IRQ_EB11MP_UART3 -1 -#define IRQ_EB11MP_CLCD -1 -#define IRQ_EB11MP_DMA -1 -#define IRQ_EB11MP_WDOG -1 -#define IRQ_EB11MP_GPIO0 -1 -#define IRQ_EB11MP_GPIO1 -1 -#define IRQ_EB11MP_GPIO2 -1 -#define IRQ_EB11MP_SCI -1 -#define IRQ_EB11MP_SSP -1 - -#define NR_GIC_EB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_EB - */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_EB) \ - && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_EB -#endif - -#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ - && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_EB11MP -#endif - /* * Core tile identification (REALVIEW_SYS_PROCID) */ diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 858eea7b1adc..98f8e7eeacc2 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -32,6 +32,8 @@ #define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ #define REALVIEW_PB1176_FLASH_BASE 0x30000000 #define REALVIEW_PB1176_FLASH_SIZE SZ_64M +#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */ +#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M #define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ #define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ @@ -71,82 +73,4 @@ #define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ -/* - * Irqs - */ -#define IRQ_DC1176_GIC_START 32 -#define IRQ_PB1176_GIC_START 64 - -/* - * ARM1176 DevChip interrupt sources (primary GIC) - */ -#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ -#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ -#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ -#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ -#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ -#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) -#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) -#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) -#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) -#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ -#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ -#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ -#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ -#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ - -#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ -#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ - -/* - * RealView PB1176 interrupt sources (secondary GIC) - */ -#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ -#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ -#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ -#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ -#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) -#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ -#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ -#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) -#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) -#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ -#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ - -#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) - -#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ - -#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) -#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) -#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ -#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ - -#define IRQ_PB1176_GPIO0 -1 -#define IRQ_PB1176_SSP -1 -#define IRQ_PB1176_SCTL -1 - -#define NR_GIC_PB1176 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB1176 - */ -#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB1176) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB1176 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB1176 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB1176 */ - #endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index 53ea0e7a1267..f0d68e0fea01 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -81,105 +81,4 @@ #define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ #define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ -/* - * Irqs - */ -#define IRQ_TC11MP_GIC_START 32 -#define IRQ_PB11MP_GIC_START 64 - -/* - * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) - */ -#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) -#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) -#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) -#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) -#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) -#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) -#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) -#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) -#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) -#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) -#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ -#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ -#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ -#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ -#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) -#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) - -#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) -#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) -#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) -#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) -#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) -#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) -#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) -#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) -#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) -#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) -#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) -#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) - -#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) -#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) -#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) - -/* - * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) - */ -#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ -#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ -#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ -#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ -#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ -#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ -#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ -#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ -#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PB11MP_SMC -1 -#define IRQ_PB11MP_SCTL -1 - -#define NR_GIC_PB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB11MP - */ -#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB11MP) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB11MP -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB11MP -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB11MP */ - #endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h index 307f97b16e5b..4dfc67a4f45f 100644 --- a/arch/arm/mach-realview/include/mach/board-pba8.h +++ b/arch/arm/mach-realview/include/mach/board-pba8.h @@ -70,81 +70,4 @@ #define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ #define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ -/* - * Irqs - */ -#define IRQ_PBA8_GIC_START 32 - -/* L220 -#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) -#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) -#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) -*/ - -/* - * PB-A8 on-board gic irq sources - */ -#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ -#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ -#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ -#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ -#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ -#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ -#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ -#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ -#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ -#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ -#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ - -/* ... */ -#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) -#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) -#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) -#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) - -#define IRQ_PBA8_SMC -1 -#define IRQ_PBA8_SCTL -1 - -#define NR_GIC_PBA8 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBA8 - */ -#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) - -#if defined(CONFIG_MACH_REALVIEW_PBA8) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBA8 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBA8 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBA8 */ - #endif /* __ASM_ARCH_BOARD_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h new file mode 100644 index 000000000000..848bfff6d8f1 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/board-pbx.h @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-realview/include/mach/board-pbx.h + * + * Copyright (C) 2009 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_BOARD_PBX_H +#define __ASM_ARCH_BOARD_PBX_H + +#include <mach/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PBX_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PBX_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PBX_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PBX_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PBX_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PBX_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PBX_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PBX_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PBX_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PBX_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PBX_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PBX_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PBX_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PBX_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PBX_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PBX_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PBX_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PBX_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PBX_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PBX_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PBX_FLASH0_BASE 0x40000000 +#define REALVIEW_PBX_FLASH0_SIZE SZ_64M +#define REALVIEW_PBX_FLASH1_BASE 0x44000000 +#define REALVIEW_PBX_FLASH1_SIZE SZ_64M +#define REALVIEW_PBX_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PBX_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PBX_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PBX_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PBX_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PBX_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +/* + * Tile-specific addresses + */ +#define REALVIEW_PBX_TILE_SCU_BASE 0x1F000000 /* SCU registers */ +#define REALVIEW_PBX_TILE_GIC_CPU_BASE 0x1F000100 /* Private Generic interrupt controller CPU interface */ +#define REALVIEW_PBX_TILE_TWD_BASE 0x1F000600 +#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE 0x1F000700 +#define REALVIEW_PBX_TILE_TWD_SIZE 0x00000100 +#define REALVIEW_PBX_TILE_GIC_DIST_BASE 0x1F001000 /* Private Generic interrupt controller distributor */ +#define REALVIEW_PBX_TILE_L220_BASE 0x1F002000 /* L220 registers */ + +#define REALVIEW_PBX_SYS_PLD_CTRL1 0x74 + +/* + * PBX PCI regions + */ +#define REALVIEW_PBX_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PBX_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PBX_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PBX_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Core tile identification (REALVIEW_SYS_PROCID) + */ +#define REALVIEW_PBX_PROC_MASK 0xFF000000 +#define REALVIEW_PBX_PROC_ARM7TDMI 0x00000000 +#define REALVIEW_PBX_PROC_ARM9 0x02000000 +#define REALVIEW_PBX_PROC_ARM11 0x04000000 +#define REALVIEW_PBX_PROC_ARM11MP 0x06000000 +#define REALVIEW_PBX_PROC_A9MP 0x0C000000 +#define REALVIEW_PBX_PROC_A8 0x0E000000 + +#define check_pbx_proc(proc_type) \ + ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \ + == proc_type) + +#ifdef CONFIG_MACH_REALVIEW_PBX +#define core_tile_pbx11mp() check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP) +#define core_tile_pbxa9mp() check_pbx_proc(REALVIEW_PBX_PROC_A9MP) +#define core_tile_pbxa8() check_pbx_proc(REALVIEW_PBX_PROC_A8) +#else +#define core_tile_pbx11mp() 0 +#define core_tile_pbxa9mp() 0 +#define core_tile_pbxa8() 0 +#endif + +#endif /* __ASM_ARCH_BOARD_PBX_H */ diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 92dbcb9e1792..932d8af18062 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -12,7 +12,8 @@ #if defined(CONFIG_MACH_REALVIEW_EB) || \ defined(CONFIG_MACH_REALVIEW_PB11MP) || \ - defined(CONFIG_MACH_REALVIEW_PBA8) + defined(CONFIG_MACH_REALVIEW_PBA8) || \ + defined(CONFIG_MACH_REALVIEW_PBX) #ifndef DEBUG_LL_UART_OFFSET #define DEBUG_LL_UART_OFFSET 0x00009000 #elif DEBUG_LL_UART_OFFSET != 0x00009000 diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h new file mode 100644 index 000000000000..204d5378f309 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-eb.h @@ -0,0 +1,129 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-eb.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_EB_H +#define __MACH_IRQS_EB_H + +#define IRQ_EB_GIC_START 32 + +/* + * RealView EB interrupt sources + */ +#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ +#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ +#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ +#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ +#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ +#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ +#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ +#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ +#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ +#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ +#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ +#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ +#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ +#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ +#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ +#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ + +/* + * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) + */ +#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) +#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) +#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) +#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) +#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) +#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) +#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) +#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) +#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) +#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) +#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ +#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ +#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ +#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ +#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) +#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) + +#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) +#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) +#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) +#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) +#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) +#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) +#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) +#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) +#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) +#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) +#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) +#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) + +#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) +#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) +#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) + +#define IRQ_EB11MP_UART2 -1 +#define IRQ_EB11MP_UART3 -1 +#define IRQ_EB11MP_CLCD -1 +#define IRQ_EB11MP_DMA -1 +#define IRQ_EB11MP_WDOG -1 +#define IRQ_EB11MP_GPIO0 -1 +#define IRQ_EB11MP_GPIO1 -1 +#define IRQ_EB11MP_GPIO2 -1 +#define IRQ_EB11MP_SCI -1 +#define IRQ_EB11MP_SSP -1 + +#define NR_GIC_EB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_EB + */ +#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_EB) \ + && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_EB +#endif + +#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ + && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_EB11MP +#endif + +#endif /* __MACH_IRQS_EB_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h new file mode 100644 index 000000000000..2410d4f8ddd3 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -0,0 +1,99 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pb1176.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PB1176_H +#define __MACH_IRQS_PB1176_H + +#define IRQ_DC1176_GIC_START 32 +#define IRQ_PB1176_GIC_START 64 + +/* + * ARM1176 DevChip interrupt sources (primary GIC) + */ +#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ +#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ +#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ +#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ +#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ +#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) +#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) +#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) +#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) +#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ +#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ +#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ +#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ + +#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ +#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ + +/* + * RealView PB1176 interrupt sources (secondary GIC) + */ +#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ +#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ +#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ +#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ +#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) +#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ +#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ +#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) +#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) +#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ +#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ + +#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) + +#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ + +#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) +#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) +#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ +#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ + +#define IRQ_PB1176_GPIO0 -1 +#define IRQ_PB1176_SSP -1 +#define IRQ_PB1176_SCTL -1 + +#define NR_GIC_PB1176 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB1176 + */ +#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB1176) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB1176 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB1176 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB1176 */ + +#endif /* __MACH_IRQS_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h new file mode 100644 index 000000000000..34e255add21e --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h @@ -0,0 +1,122 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pb11mp.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PB11MP_H +#define __MACH_IRQS_PB11MP_H + +#define IRQ_TC11MP_GIC_START 32 +#define IRQ_PB11MP_GIC_START 64 + +/* + * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) + */ +#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) +#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) +#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) +#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) +#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) +#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) +#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) +#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) +#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) +#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) +#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ +#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ +#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ +#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ +#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) +#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) + +#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) +#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) +#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) +#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) +#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) +#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) +#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) +#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) +#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) +#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) +#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) +#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) + +#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) +#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) + +/* + * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) + */ +#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ +#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ +#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ +#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ +#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ +#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ +#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ +#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ +#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PB11MP_SMC -1 +#define IRQ_PB11MP_SCTL -1 + +#define NR_GIC_PB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB11MP + */ +#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB11MP) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB11MP +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB11MP +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB11MP */ + +#endif /* __MACH_IRQS_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h new file mode 100644 index 000000000000..86792a9f2ab6 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h @@ -0,0 +1,98 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pba8.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PBA8_H +#define __MACH_IRQS_PBA8_H + +#define IRQ_PBA8_GIC_START 32 + +/* L220 +#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) +#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) +#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) +*/ + +/* + * PB-A8 on-board gic irq sources + */ +#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ +#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ +#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ +#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ +#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ + +/* ... */ +#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) +#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) +#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) +#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) + +#define IRQ_PBA8_SMC -1 +#define IRQ_PBA8_SCTL -1 + +#define NR_GIC_PBA8 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBA8 + */ +#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) + +#if defined(CONFIG_MACH_REALVIEW_PBA8) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBA8 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBA8 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBA8 */ + +#endif /* __MACH_IRQS_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h new file mode 100644 index 000000000000..deaad4302b17 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pbx.h + * + * Copyright (C) 2009 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __MACH_IRQS_PBX_H +#define __MACH_IRQS_PBX_H + +#define IRQ_PBX_GIC_START 32 + +/* L220 +#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29) +#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30) +#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31) +*/ + +/* + * PBX on-board gic irq sources + */ +#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */ +#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */ +#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */ +#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */ +#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */ +#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33) +#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34) +#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35) +#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36) +#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37) +#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38) +#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39) + +#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */ +#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ +#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ +/* ... */ +#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ +#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45) +#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46) +#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47) + +/* ... */ +#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) +#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51) +#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52) +#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53) + +#define IRQ_PBX_SMC -1 +#define IRQ_PBX_SCTL -1 + +#define NR_GIC_PBX 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBX + */ +#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PBX) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBX +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBX +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBX */ + +#endif /* __MACH_IRQS_PBX_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h index fe5cb987aa21..78854f2fa323 100644 --- a/arch/arm/mach-realview/include/mach/irqs.h +++ b/arch/arm/mach-realview/include/mach/irqs.h @@ -22,10 +22,11 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#include <mach/board-eb.h> -#include <mach/board-pb11mp.h> -#include <mach/board-pb1176.h> -#include <mach/board-pba8.h> +#include <mach/irqs-eb.h> +#include <mach/irqs-pb11mp.h> +#include <mach/irqs-pb1176.h> +#include <mach/irqs-pba8.h> +#include <mach/irqs-pbx.h> #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h deleted file mode 100644 index d55802d645af..000000000000 --- a/arch/arm/mach-realview/include/mach/scu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASMARM_ARCH_SCU_H -#define __ASMARM_ARCH_SCU_H - -/* - * SCU registers - */ -#define SCU_CTRL 0x00 -#define SCU_CONFIG 0x04 -#define SCU_CPU_STATUS 0x08 -#define SCU_INVALIDATE 0x0c -#define SCU_FPGA_REVISION 0x10 - -#endif diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h index 415d634d52ab..83050378ffd2 100644 --- a/arch/arm/mach-realview/include/mach/uncompress.h +++ b/arch/arm/mach-realview/include/mach/uncompress.h @@ -24,6 +24,7 @@ #include <mach/board-pb11mp.h> #include <mach/board-pb1176.h> #include <mach/board-pba8.h> +#include <mach/board-pbx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) #define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) @@ -43,6 +44,8 @@ static inline unsigned long get_uart_base(void) return REALVIEW_PB1176_UART0_BASE; else if (machine_is_realview_pba8()) return REALVIEW_PBA8_UART0_BASE; + else if (machine_is_realview_pbx()) + return REALVIEW_PBX_UART0_BASE; else return 0; } diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index 1c01d13460f0..60b4e111f459 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -9,196 +9,18 @@ * published by the Free Software Foundation. */ #include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/device.h> #include <linux/smp.h> -#include <linux/jiffies.h> -#include <linux/percpu.h> #include <linux/clockchips.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/hardware/arm_twd.h> -#include <asm/hardware/gic.h> -#include <mach/hardware.h> #include <asm/irq.h> - -static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); - -/* - * Used on SMP for either the local timer or IPI_TIMER - */ -void local_timer_interrupt(void) -{ - struct clock_event_device *clk = &__get_cpu_var(local_clockevent); - - clk->event_handler(clk); -} - -#ifdef CONFIG_LOCAL_TIMERS - -/* set up by the platform code */ -void __iomem *twd_base; - -static unsigned long mpcore_timer_rate; - -static void local_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ - ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE - | TWD_TIMER_CONTROL_PERIODIC; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); -} - -static int local_timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); - - __raw_writel(evt, twd_base + TWD_TIMER_COUNTER); - __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL); - - return 0; -} - -/* - * local_timer_ack: checks for a local timer interrupt. - * - * If a local timer interrupt has occurred, acknowledge and return 1. - * Otherwise, return 0. - */ -int local_timer_ack(void) -{ - if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { - __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); - return 1; - } - - return 0; -} - -static void __cpuinit twd_calibrate_rate(void) -{ - unsigned long load, count; - u64 waitjiffies; - - /* - * If this is the first time round, we need to work out how fast - * the timer ticks - */ - if (mpcore_timer_rate == 0) { - printk("Calibrating local timer... "); - - /* Wait for a tick to start */ - waitjiffies = get_jiffies_64() + 1; - - while (get_jiffies_64() < waitjiffies) - udelay(10); - - /* OK, now the tick has started, let's get the timer going */ - waitjiffies += 5; - - /* enable, no interrupt or reload */ - __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL); - - /* maximum value */ - __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); - - while (get_jiffies_64() < waitjiffies) - udelay(10); - - count = __raw_readl(twd_base + TWD_TIMER_COUNTER); - - mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); - - printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000, - (mpcore_timer_rate / 100000) % 100); - } - - load = mpcore_timer_rate / HZ; - - __raw_writel(load, twd_base + TWD_TIMER_LOAD); -} +#include <asm/smp_twd.h> +#include <asm/localtimer.h> /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); - unsigned long flags; - - twd_calibrate_rate(); - - clk->name = "local_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - clk->rating = 350; - clk->set_mode = local_timer_set_mode; - clk->set_next_event = local_timer_set_next_event; - clk->irq = IRQ_LOCALTIMER; - clk->cpumask = cpumask_of(cpu); - clk->shift = 20; - clk->mult = div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift); - clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); - clk->min_delta_ns = clockevent_delta2ns(0xf, clk); - - /* Make sure our local interrupt controller has this enabled */ - local_irq_save(flags); - get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER); - local_irq_restore(flags); - - clockevents_register_device(clk); -} - -/* - * take a local timer down - */ -void __cpuexit local_timer_stop(void) +void __cpuinit local_timer_setup(struct clock_event_device *evt) { - __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); } - -#else /* CONFIG_LOCAL_TIMERS */ - -static void dummy_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ -} - -void __cpuinit local_timer_setup(void) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); - - clk->name = "dummy_timer"; - clk->features = CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_DUMMY; - clk->rating = 400; - clk->mult = 1; - clk->set_mode = dummy_timer_set_mode; - clk->broadcast = smp_timer_broadcast; - clk->cpumask = cpumask_of(cpu); - - clockevents_register_device(clk); -} - -#endif /* !CONFIG_LOCAL_TIMERS */ diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 30a9c68591f6..ac0e83f1cc3a 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -19,10 +19,12 @@ #include <asm/cacheflush.h> #include <mach/hardware.h> #include <asm/mach-types.h> +#include <asm/localtimer.h> #include <mach/board-eb.h> #include <mach/board-pb11mp.h> -#include <mach/scu.h> +#include <mach/board-pbx.h> +#include <asm/smp_scu.h> #include "core.h" @@ -40,35 +42,19 @@ static void __iomem *scu_base_addr(void) return __io_address(REALVIEW_EB11MP_SCU_BASE); else if (machine_is_realview_pb11mp()) return __io_address(REALVIEW_TC11MP_SCU_BASE); + else if (machine_is_realview_pbx() && + (core_tile_pbx11mp() || core_tile_pbxa9mp())) + return __io_address(REALVIEW_PBX_TILE_SCU_BASE); else return (void __iomem *)0; } -static unsigned int __init get_core_count(void) +static inline unsigned int get_core_count(void) { - unsigned int ncores; void __iomem *scu_base = scu_base_addr(); - - if (scu_base) { - ncores = __raw_readl(scu_base + SCU_CONFIG); - ncores = (ncores & 0x03) + 1; - } else - ncores = 1; - - return ncores; -} - -/* - * Setup the SCU - */ -static void scu_enable(void) -{ - u32 scu_ctrl; - void __iomem *scu_base = scu_base_addr(); - - scu_ctrl = __raw_readl(scu_base + SCU_CTRL); - scu_ctrl |= 1; - __raw_writel(scu_ctrl, scu_base + SCU_CTRL); + if (scu_base) + return scu_get_core_count(scu_base); + return 1; } static DEFINE_SPINLOCK(boot_lock); @@ -184,7 +170,7 @@ void __init smp_init_cpus(void) unsigned int i, ncores = get_core_count(); for (i = 0; i < ncores; i++) - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -217,19 +203,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; -#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) - /* - * Enable the local timer or broadcast device for the boot CPU. - */ - local_timer_setup(); -#endif - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ for (i = 0; i < max_cpus; i++) - cpu_set(i, cpu_present_map); + set_cpu_present(i, true); /* * Initialise the SCU if there are more than one CPU and let @@ -239,7 +218,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * WFI */ if (max_cpus > 1) { - scu_enable(); + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + scu_enable(scu_base_addr()); poke_milo(); } } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index c20fbef122b3..8dfa44e08a94 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -32,6 +32,7 @@ #include <asm/hardware/gic.h> #include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/localtimer.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index a64b84a7a3df..25efe71a67c7 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -203,11 +203,23 @@ static struct amba_device *amba_devs[] __initdata = { /* * RealView PB1176 platform devices */ -static struct resource realview_pb1176_flash_resource = { - .start = REALVIEW_PB1176_FLASH_BASE, - .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, +static struct resource realview_pb1176_flash_resources[] = { + [0] = { + .start = REALVIEW_PB1176_FLASH_BASE, + .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PB1176_SEC_FLASH_BASE, + .end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, }; +#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH +#define PB1176_FLASH_BLOCKS 2 +#else +#define PB1176_FLASH_BLOCKS 1 +#endif static struct resource realview_pb1176_smsc911x_resources[] = { [0] = { @@ -271,7 +283,8 @@ static void __init realview_pb1176_init(void) l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff); #endif - realview_flash_register(&realview_pb1176_flash_resource, 1); + realview_flash_register(realview_pb1176_flash_resources, + PB1176_FLASH_BLOCKS); realview_eth_register(NULL, realview_pb1176_smsc911x_resources); platform_device_register(&realview_i2c_device); realview_usb_register(realview_pb1176_isp1761_resources); diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index ea1e60eca359..dc4b16943907 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -32,6 +32,7 @@ #include <asm/hardware/gic.h> #include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/localtimer.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c new file mode 100644 index 000000000000..1fe294d0bf9d --- /dev/null +++ b/arch/arm/mach-realview/realview_pbx.c @@ -0,0 +1,335 @@ +/* + * arch/arm/mach-realview/realview_pbx.c + * + * Copyright (C) 2009 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/amba/bus.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/cache-l2x0.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> +#include <asm/mach/time.h> + +#include <mach/hardware.h> +#include <mach/board-pbx.h> +#include <mach/irqs.h> + +#include "core.h" + +static struct map_desc realview_pbx_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_PCI + { + .virtual = PCIX_UNIT_BASE, + .pfn = __phys_to_pfn(REALVIEW_PBX_PCI_BASE), + .length = REALVIEW_PBX_PCI_BASE_SIZE, + .type = MT_DEVICE, + }, +#endif +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static struct map_desc realview_local_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE), + .length = SZ_8K, + .type = MT_DEVICE, + } +}; + +static void __init realview_pbx_map_io(void) +{ + iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc)); + if (core_tile_pbx11mp() || core_tile_pbxa9mp()) + iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc)); +} + +/* + * RealView PBXCore AMBA devices + */ + +#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } +#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } +#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } +#define PBX_SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } +#define PBX_CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } +#define DMAC_DMA { 0, 0 } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } +#define PBX_WATCHDOG_DMA { 0, 0 } +#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } +#define PBX_GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } +#define PBX_RTC_DMA { 0, 0 } +#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } +#define PBX_UART0_DMA { 15, 14 } +#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } +#define PBX_UART1_DMA { 13, 12 } +#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } +#define PBX_UART2_DMA { 11, 10 } +#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } +#define PBX_UART3_DMA { 0x86, 0x87 } +#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } +#define PBX_SSP_DMA { 9, 8 } + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", PBX_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", PBX_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", PBX_SSP, NULL); + +/* Primecells on the NEC ISSP chip */ +AMBA_DEVICE(clcd, "issp:20", PBX_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "issp:30", DMAC, NULL); + +static struct amba_device *amba_devs[] __initdata = { + &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +/* + * RealView PB-X platform devices + */ +static struct resource realview_pbx_flash_resources[] = { + [0] = { + .start = REALVIEW_PBX_FLASH0_BASE, + .end = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PBX_FLASH1_BASE, + .end = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource realview_pbx_smsc911x_resources[] = { + [0] = { + .start = REALVIEW_PBX_ETH_BASE, + .end = REALVIEW_PBX_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PBX_ETH, + .end = IRQ_PBX_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource realview_pbx_isp1761_resources[] = { + [0] = { + .start = REALVIEW_PBX_USB_BASE, + .end = REALVIEW_PBX_USB_BASE + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PBX_USB, + .end = IRQ_PBX_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static void __init gic_init_irq(void) +{ + /* ARM PBX on-board GIC */ + if (core_tile_pbx11mp() || core_tile_pbxa9mp()) { + gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE), + 29); + gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE)); + } else { + gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE), + IRQ_PBX_GIC_START); + gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE)); + } +} + +static void __init realview_pbx_timer_init(void) +{ + timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20; + +#ifdef CONFIG_LOCAL_TIMERS + if (core_tile_pbx11mp() || core_tile_pbxa9mp()) + twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE); +#endif + realview_timer_init(IRQ_PBX_TIMER0_1); +} + +static struct sys_timer realview_pbx_timer = { + .init = realview_pbx_timer_init, +}; + +static void __init realview_pbx_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + if (core_tile_pbxa9mp()) { + void __iomem *l2x0_base = + __io_address(REALVIEW_PBX_TILE_L220_BASE); + + /* set RAM latencies to 1 cycle for eASIC */ + writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); + + /* 16KB way size, 8-way associativity, parity disabled + * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */ + l2x0_init(l2x0_base, 0x02520000, 0xc0000fff); + } +#endif + + realview_flash_register(realview_pbx_flash_resources, + ARRAY_SIZE(realview_pbx_flash_resources)); + realview_eth_register(NULL, realview_pbx_smsc911x_resources); + platform_device_register(&realview_i2c_device); + platform_device_register(&realview_cf_device); + realview_usb_register(realview_pbx_isp1761_resources); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_io = REALVIEW_PBX_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = realview_pbx_map_io, + .init_irq = gic_init_irq, + .timer = &realview_pbx_timer, + .init_machine = realview_pbx_init, +MACHINE_END diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c index 7a7ed4174c8c..6c68e78f3595 100644 --- a/arch/arm/mach-s3c2400/gpio.c +++ b/arch/arm/mach-s3c2400/gpio.c @@ -33,10 +33,10 @@ int s3c2400_gpio_getirq(unsigned int pin) { - if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7) - return -1; /* not valid interrupts */ + if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7)) + return -EINVAL; /* not valid interrupts */ - return (pin - S3C2410_GPE0) + IRQ_EINT0; + return (pin - S3C2410_GPE(0)) + IRQ_EINT0; } EXPORT_SYMBOL(s3c2400_gpio_getirq); diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 63a30d1dd425..41bb65d5b91f 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -59,6 +59,7 @@ config ARCH_H1940 bool "IPAQ H1940" select CPU_S3C2410 select PM_H1940 if PM + select S3C_DEV_USB_HOST help Say Y here if you are using the HP IPAQ H1940 @@ -70,6 +71,7 @@ config PM_H1940 config MACH_N30 bool "Acer N30 family" select CPU_S3C2410 + select S3C_DEV_USB_HOST help Say Y here if you want suppt for the Acer N30, Acer N35, Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. @@ -82,6 +84,7 @@ config ARCH_BAST select MACH_BAST_IDE select S3C24XX_DCLK select ISA + select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics EB2410ITX development board (also known as BAST) @@ -89,6 +92,7 @@ config ARCH_BAST config MACH_OTOM bool "NexVision OTOM Board" select CPU_S3C2410 + select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision OTOM board @@ -96,6 +100,7 @@ config MACH_AML_M5900 bool "AML M5900 Series" select CPU_S3C2410 select PM_SIMTEC if PM + select S3C_DEV_USB_HOST help Say Y here if you are using the American Microsystems M5900 Series <http://www.amltd.com> @@ -111,6 +116,7 @@ config BAST_PC104_IRQ config MACH_TCT_HAMMER bool "TCT Hammer Board" select CPU_S3C2410 + select S3C_DEV_USB_HOST help Say Y here if you are using the TinCanTools Hammer Board <http://www.tincantools.com> @@ -122,12 +128,14 @@ config MACH_VR1000 select SIMTEC_NOR select MACH_BAST_IDE select CPU_S3C2410 + select S3C_DEV_USB_HOST help Say Y here if you are using the Thorcom VR1000 board. config MACH_QT2410 bool "QT2410" select CPU_S3C2410 + select S3C_DEV_USB_HOST help Say Y here if you are using the Armzone QT2410 diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 440c014e24b3..dbf96e60d992 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -17,14 +17,16 @@ #include <linux/sysdev.h> #include <linux/serial_core.h> +#include <mach/map.h> #include <mach/dma.h> #include <plat/cpu.h> -#include <plat/dma.h> +#include <plat/dma-plat.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-ac97.h> +#include <plat/regs-dma.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index 36a3132f39e7..7974afca297c 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, unsigned long flags; unsigned long val; - if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) - return -1; + if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15)) + return -EINVAL; config &= 0xff; - pin -= S3C2410_GPG8; + pin -= S3C2410_GPG(8); reg += pin & ~3; local_irq_save(flags); diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 5a6bc56f186b..5aabf117cbb0 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -16,6 +16,8 @@ #include <linux/string.h> #include <linux/ctype.h> #include <linux/leds.h> +#include <linux/gpio.h> + #include <mach/regs-gpio.h> #include <mach/hardware.h> #include <mach/h1940-latch.h> @@ -41,9 +43,9 @@ static void h1940bt_enable(int on) h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); /* Reset the chip */ mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH1, 1); + s3c2410_gpio_setpin(S3C2410_GPH(1), 1); mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH1, 0); + s3c2410_gpio_setpin(S3C2410_GPH(1), 0); state = 1; } @@ -52,9 +54,9 @@ static void h1940bt_enable(int on) led_trigger_event(bt_led_trigger, 0); #endif - s3c2410_gpio_setpin(S3C2410_GPH1, 1); + s3c2410_gpio_setpin(S3C2410_GPH(1), 1); mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH1, 0); + s3c2410_gpio_setpin(S3C2410_GPH(1), 0); mdelay(10); h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); @@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644, static int __init h1940bt_probe(struct platform_device *pdev) { /* Configures BT serial port GPIOs */ - s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0); - s3c2410_gpio_pullup(S3C2410_GPH0, 1); - s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP); - s3c2410_gpio_pullup(S3C2410_GPH1, 1); - s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0); - s3c2410_gpio_pullup(S3C2410_GPH2, 1); - s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0); - s3c2410_gpio_pullup(S3C2410_GPH3, 1); + s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); + s3c2410_gpio_pullup(S3C2410_GPH(0), 1); + s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_pullup(S3C2410_GPH(1), 1); + s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); + s3c2410_gpio_pullup(S3C2410_GPH(2), 1); + s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); + s3c2410_gpio_pullup(S3C2410_GPH(3), 1); #ifdef CONFIG_LEDS_H1940 led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger); diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index 13358ce2128c..c3a2629e0ded 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -3,7 +3,7 @@ * Copyright (C) 2003,2004,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Samsung S3C241XX DMA support + * Samsung S3C24XX DMA support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,8 +13,8 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ +#include <plat/dma.h> #include <linux/sysdev.h> -#include <mach/hardware.h> #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ @@ -55,9 +55,9 @@ enum dma_ch { /* we have 4 dma channels */ #ifndef CONFIG_CPU_S3C2443 -#define S3C2410_DMA_CHANNELS (4) +#define S3C_DMA_CHANNELS (4) #else -#define S3C2410_DMA_CHANNELS (6) +#define S3C_DMA_CHANNELS (6) #endif /* types */ @@ -68,7 +68,6 @@ enum s3c2410_dma_state { S3C2410_DMA_PAUSED }; - /* enum s3c2410_dma_loadst * * This represents the state of the DMA engine, wrt to the loaded / running @@ -104,32 +103,6 @@ enum s3c2410_dma_loadst { S3C2410_DMALOAD_1LOADED_1RUNNING, }; -enum s3c2410_dma_buffresult { - S3C2410_RES_OK, - S3C2410_RES_ERR, - S3C2410_RES_ABORT -}; - -enum s3c2410_dmasrc { - S3C2410_DMASRC_HW, /* source is memory */ - S3C2410_DMASRC_MEM /* source is hardware */ -}; - -/* enum s3c2410_chan_op - * - * operation codes passed to the DMA code by the user, and also used - * to inform the current channel owner of any changes to the system state -*/ - -enum s3c2410_chan_op { - S3C2410_DMAOP_START, - S3C2410_DMAOP_STOP, - S3C2410_DMAOP_PAUSE, - S3C2410_DMAOP_RESUME, - S3C2410_DMAOP_FLUSH, - S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ - S3C2410_DMAOP_STARTED, /* indicate channel started */ -}; /* flags */ @@ -139,17 +112,14 @@ enum s3c2410_chan_op { /* dma buffer */ -struct s3c2410_dma_client { - char *name; -}; +struct s3c2410_dma_buf; -/* s3c2410_dma_buf_s +/* s3c2410_dma_buf * * internally used buffer structure to describe a queued or running * buffer. */ -struct s3c2410_dma_buf; struct s3c2410_dma_buf { struct s3c2410_dma_buf *next; int magic; /* magic */ @@ -161,20 +131,6 @@ struct s3c2410_dma_buf { /* [1] is this updated for both recv/send modes? */ -struct s3c2410_dma_chan; - -/* s3c2410_dma_cbfn_t - * - * buffer callback routine type -*/ - -typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, - void *buf, int size, - enum s3c2410_dma_buffresult result); - -typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, - enum s3c2410_chan_op ); - struct s3c2410_dma_stats { unsigned long loads; unsigned long timeout_longest; @@ -206,10 +162,10 @@ struct s3c2410_dma_chan { /* channel configuration */ enum s3c2410_dmasrc source; + enum dma_ch req_ch; unsigned long dev_addr; unsigned long load_timeout; unsigned int flags; /* channel flags */ - unsigned int hw_cfg; /* last hw config */ struct s3c24xx_dma_map *map; /* channel hw maps */ @@ -236,213 +192,6 @@ struct s3c2410_dma_chan { struct sys_device dev; }; -/* the currently allocated channel information */ -extern struct s3c2410_dma_chan s3c2410_chans[]; - -/* note, we don't really use dma_device_t at the moment */ typedef unsigned long dma_device_t; -/* functions --------------------------------------------------------------- */ - -/* s3c2410_dma_request - * - * request a dma channel exclusivley -*/ - -extern int s3c2410_dma_request(unsigned int channel, - struct s3c2410_dma_client *, void *dev); - - -/* s3c2410_dma_ctrl - * - * change the state of the dma channel -*/ - -extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); - -/* s3c2410_dma_setflags - * - * set the channel's flags to a given state -*/ - -extern int s3c2410_dma_setflags(unsigned int channel, - unsigned int flags); - -/* s3c2410_dma_free - * - * free the dma channel (will also abort any outstanding operations) -*/ - -extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); - -/* s3c2410_dma_enqueue - * - * place the given buffer onto the queue of operations for the channel. - * The buffer must be allocated from dma coherent memory, or the Dcache/WB - * drained before the buffer is given to the DMA system. -*/ - -extern int s3c2410_dma_enqueue(unsigned int channel, void *id, - dma_addr_t data, int size); - -/* s3c2410_dma_config - * - * configure the dma channel -*/ - -extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon); - -/* s3c2410_dma_devconfig - * - * configure the device we're talking to -*/ - -extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, - int hwcfg, unsigned long devaddr); - -/* s3c2410_dma_getposition - * - * get the position that the dma transfer is currently at -*/ - -extern int s3c2410_dma_getposition(unsigned int channel, - dma_addr_t *src, dma_addr_t *dest); - -extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); - -/* DMA Register definitions */ - -#define S3C2410_DMA_DISRC (0x00) -#define S3C2410_DMA_DISRCC (0x04) -#define S3C2410_DMA_DIDST (0x08) -#define S3C2410_DMA_DIDSTC (0x0C) -#define S3C2410_DMA_DCON (0x10) -#define S3C2410_DMA_DSTAT (0x14) -#define S3C2410_DMA_DCSRC (0x18) -#define S3C2410_DMA_DCDST (0x1C) -#define S3C2410_DMA_DMASKTRIG (0x20) -#define S3C2412_DMA_DMAREQSEL (0x24) -#define S3C2443_DMA_DMAREQSEL (0x24) - -#define S3C2410_DISRCC_INC (1<<0) -#define S3C2410_DISRCC_APB (1<<1) - -#define S3C2410_DMASKTRIG_STOP (1<<2) -#define S3C2410_DMASKTRIG_ON (1<<1) -#define S3C2410_DMASKTRIG_SWTRIG (1<<0) - -#define S3C2410_DCON_DEMAND (0<<31) -#define S3C2410_DCON_HANDSHAKE (1<<31) -#define S3C2410_DCON_SYNC_PCLK (0<<30) -#define S3C2410_DCON_SYNC_HCLK (1<<30) - -#define S3C2410_DCON_INTREQ (1<<29) - -#define S3C2410_DCON_CH0_XDREQ0 (0<<24) -#define S3C2410_DCON_CH0_UART0 (1<<24) -#define S3C2410_DCON_CH0_SDI (2<<24) -#define S3C2410_DCON_CH0_TIMER (3<<24) -#define S3C2410_DCON_CH0_USBEP1 (4<<24) - -#define S3C2410_DCON_CH1_XDREQ1 (0<<24) -#define S3C2410_DCON_CH1_UART1 (1<<24) -#define S3C2410_DCON_CH1_I2SSDI (2<<24) -#define S3C2410_DCON_CH1_SPI (3<<24) -#define S3C2410_DCON_CH1_USBEP2 (4<<24) - -#define S3C2410_DCON_CH2_I2SSDO (0<<24) -#define S3C2410_DCON_CH2_I2SSDI (1<<24) -#define S3C2410_DCON_CH2_SDI (2<<24) -#define S3C2410_DCON_CH2_TIMER (3<<24) -#define S3C2410_DCON_CH2_USBEP3 (4<<24) - -#define S3C2410_DCON_CH3_UART2 (0<<24) -#define S3C2410_DCON_CH3_SDI (1<<24) -#define S3C2410_DCON_CH3_SPI (2<<24) -#define S3C2410_DCON_CH3_TIMER (3<<24) -#define S3C2410_DCON_CH3_USBEP4 (4<<24) - -#define S3C2410_DCON_SRCSHIFT (24) -#define S3C2410_DCON_SRCMASK (7<<24) - -#define S3C2410_DCON_BYTE (0<<20) -#define S3C2410_DCON_HALFWORD (1<<20) -#define S3C2410_DCON_WORD (2<<20) - -#define S3C2410_DCON_AUTORELOAD (0<<22) -#define S3C2410_DCON_NORELOAD (1<<22) -#define S3C2410_DCON_HWTRIG (1<<23) - -#ifdef CONFIG_CPU_S3C2440 -#define S3C2440_DIDSTC_CHKINT (1<<2) - -#define S3C2440_DCON_CH0_I2SSDO (5<<24) -#define S3C2440_DCON_CH0_PCMIN (6<<24) - -#define S3C2440_DCON_CH1_PCMOUT (5<<24) -#define S3C2440_DCON_CH1_SDI (6<<24) - -#define S3C2440_DCON_CH2_PCMIN (5<<24) -#define S3C2440_DCON_CH2_MICIN (6<<24) - -#define S3C2440_DCON_CH3_MICIN (5<<24) -#define S3C2440_DCON_CH3_PCMOUT (6<<24) -#endif - -#ifdef CONFIG_CPU_S3C2412 - -#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) - -#define S3C2412_DMAREQSEL_HW (1) - -#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) -#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) -#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) -#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) -#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) -#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) -#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) -#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) -#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) -#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) -#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) -#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) -#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) -#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) -#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) -#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) -#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) -#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) -#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) -#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) - -#endif - -#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) - -#define S3C2443_DMAREQSEL_HW (1) - -#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) -#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) -#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) -#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) -#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) -#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) -#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) -#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) -#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) -#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) -#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) -#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) -#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) -#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) -#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) -#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) -#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) -#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) -#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) -#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) -#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) - #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h index 6c9fbb99ef14..8fe192081d3a 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h @@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) { struct s3c_gpio_chip *chip; - if (pin > S3C2410_GPG10) + if (pin > S3C2410_GPG(10)) return NULL; chip = &s3c24xx_gpios[pin/32]; diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h new file mode 100644 index 000000000000..801dff13858d --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -0,0 +1,103 @@ +/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h + * + * Copyright (c) 2003,2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - hardware + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* These functions are in the to-be-removed category and it is strongly + * encouraged not to use these in new code. They will be marked deprecated + * very soon. + * + * Most of the functionality can be either replaced by the gpiocfg calls + * for the s3c platform or by the generic GPIOlib API. +*/ + +/* external functions for GPIO support + * + * These allow various different clients to access the same GPIO + * registers without conflicting. If your driver only owns the entire + * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. +*/ + +/* s3c2410_gpio_cfgpin + * + * set the configuration of the given pin to the value passed. + * + * eg: + * s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0); + * s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); +*/ + +extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); + +extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); + +/* s3c2410_gpio_getirq + * + * turn the given pin number into the corresponding IRQ number + * + * returns: + * < 0 = no interrupt for this pin + * >=0 = interrupt number for the pin +*/ + +extern int s3c2410_gpio_getirq(unsigned int pin); + +#ifdef CONFIG_CPU_S3C2400 + +extern int s3c2400_gpio_getirq(unsigned int pin); + +#endif /* CONFIG_CPU_S3C2400 */ + +/* s3c2410_gpio_irqfilter + * + * set the irq filtering on the given pin + * + * on = 0 => disable filtering + * 1 => enable filtering + * + * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with + * width of filter (0 through 63) + * + * +*/ + +extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config); + +/* s3c2410_gpio_pullup + * + * configure the pull-up control on the given pin + * + * to = 1 => disable the pull-up + * 0 => enable the pull-up + * + * eg; + * + * s3c2410_gpio_pullup(S3C2410_GPB(0), 0); + * s3c2410_gpio_pullup(S3C2410_GPE(8), 0); +*/ + +extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); + +/* s3c2410_gpio_getpull + * + * Read the state of the pull-up on a given pin + * + * return: + * < 0 => error code + * 0 => enabled + * 1 => disabled +*/ + +extern int s3c2410_gpio_getpull(unsigned int pin); + +extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); + +extern unsigned int s3c2410_gpio_getpin(unsigned int pin); diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h index ce1ec69806a1..2edbb9c88ab3 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -11,6 +11,9 @@ * published by the Free Software Foundation. */ +#ifndef __MACH_GPIONRS_H +#define __MACH_GPIONRS_H + #define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) #define S3C2410_GPIO_BANKA (32*0) @@ -21,3 +24,70 @@ #define S3C2410_GPIO_BANKF (32*5) #define S3C2410_GPIO_BANKG (32*6) #define S3C2410_GPIO_BANKH (32*7) + +/* GPIO bank sizes */ +#define S3C2410_GPIO_A_NR (32) +#define S3C2410_GPIO_B_NR (32) +#define S3C2410_GPIO_C_NR (32) +#define S3C2410_GPIO_D_NR (32) +#define S3C2410_GPIO_E_NR (32) +#define S3C2410_GPIO_F_NR (32) +#define S3C2410_GPIO_G_NR (32) +#define S3C2410_GPIO_H_NR (32) + +#if CONFIG_S3C_GPIO_SPACE != 0 +#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment +#endif + +#define S3C2410_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0) + +#ifndef __ASSEMBLY__ + +enum s3c_gpio_number { + S3C2410_GPIO_A_START = 0, + S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A), + S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B), + S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C), + S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D), + S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E), + S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F), + S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G), +}; + +#endif /* __ASSEMBLY__ */ + +/* S3C2410 GPIO number definitions. */ + +#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr)) +#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr)) +#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr)) +#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr)) +#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr)) +#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr)) +#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr)) +#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr)) + +/* compatibility until drivers can be modified */ + +#define S3C2410_GPA0 S3C2410_GPA(0) +#define S3C2410_GPA1 S3C2410_GPA(1) +#define S3C2410_GPA3 S3C2410_GPA(3) +#define S3C2410_GPA7 S3C2410_GPA(7) + +#define S3C2410_GPE0 S3C2410_GPE(0) +#define S3C2410_GPE1 S3C2410_GPE(1) +#define S3C2410_GPE2 S3C2410_GPE(2) +#define S3C2410_GPE3 S3C2410_GPE(3) +#define S3C2410_GPE4 S3C2410_GPE(4) +#define S3C2410_GPE5 S3C2410_GPE(5) +#define S3C2410_GPE6 S3C2410_GPE(6) +#define S3C2410_GPE7 S3C2410_GPE(7) +#define S3C2410_GPE8 S3C2410_GPE(8) +#define S3C2410_GPE9 S3C2410_GPE(9) +#define S3C2410_GPE10 S3C2410_GPE(10) + +#define S3C2410_GPH10 S3C2410_GPH(10) + +#endif /* __MACH_GPIONRS_H */ + diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index 51a88cf9526b..15f0b3e7ce69 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -24,5 +24,6 @@ #include <asm-generic/gpio.h> #include <mach/gpio-nrs.h> +#include <mach/gpio-fns.h> #define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32) diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h index 74d5a1a4024c..aef5631eac58 100644 --- a/arch/arm/mach-s3c2410/include/mach/hardware.h +++ b/arch/arm/mach-s3c2410/include/mach/hardware.h @@ -15,101 +15,6 @@ #ifndef __ASSEMBLY__ -/* external functions for GPIO support - * - * These allow various different clients to access the same GPIO - * registers without conflicting. If your driver only owns the entire - * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. -*/ - -/* s3c2410_gpio_cfgpin - * - * set the configuration of the given pin to the value passed. - * - * eg: - * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0); - * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); -*/ - -extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); - -extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); - -/* s3c2410_gpio_getirq - * - * turn the given pin number into the corresponding IRQ number - * - * returns: - * < 0 = no interrupt for this pin - * >=0 = interrupt number for the pin -*/ - -extern int s3c2410_gpio_getirq(unsigned int pin); - -/* s3c2410_gpio_irq2pin - * - * turn the given irq number into the corresponding GPIO number - * - * returns: - * < 0 = no pin - * >=0 = gpio pin number -*/ - -extern int s3c2410_gpio_irq2pin(unsigned int irq); - -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_gpio_getirq(unsigned int pin); - -#endif /* CONFIG_CPU_S3C2400 */ - -/* s3c2410_gpio_irqfilter - * - * set the irq filtering on the given pin - * - * on = 0 => disable filtering - * 1 => enable filtering - * - * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with - * width of filter (0 through 63) - * - * -*/ - -extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config); - -/* s3c2410_gpio_pullup - * - * configure the pull-up control on the given pin - * - * to = 1 => disable the pull-up - * 0 => enable the pull-up - * - * eg; - * - * s3c2410_gpio_pullup(S3C2410_GPB0, 0); - * s3c2410_gpio_pullup(S3C2410_GPE8, 0); -*/ - -extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); - -/* s3c2410_gpio_getpull - * - * Read the state of the pull-up on a given pin - * - * return: - * < 0 => error code - * 0 => enabled - * 1 => disabled -*/ - -extern int s3c2410_gpio_getpull(unsigned int pin); - -extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); - -extern unsigned int s3c2410_gpio_getpin(unsigned int pin); - extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); #ifdef CONFIG_CPU_S3C2440 diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 255fdfeaf957..e99b212cb1ca 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -84,7 +84,6 @@ #define S3C24XX_PA_IRQ S3C2410_PA_IRQ #define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST #define S3C24XX_PA_DMA S3C2410_PA_DMA #define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR #define S3C24XX_PA_LCD S3C2410_PA_LCD @@ -102,6 +101,7 @@ #define S3C_PA_IIC S3C2410_PA_IIC #define S3C_PA_UART S3C24XX_PA_UART +#define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2443_PA_HSMMC #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 35a03df473fc..b278d0c45ccf 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -69,104 +69,58 @@ #define S3C2400_GPACON S3C2410_GPIOREG(0x00) #define S3C2400_GPADAT S3C2410_GPIOREG(0x04) -#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0) -#define S3C2410_GPA0_OUT (0<<0) #define S3C2410_GPA0_ADDR0 (1<<0) -#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1) -#define S3C2410_GPA1_OUT (0<<1) #define S3C2410_GPA1_ADDR16 (1<<1) -#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2) -#define S3C2410_GPA2_OUT (0<<2) #define S3C2410_GPA2_ADDR17 (1<<2) -#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3) -#define S3C2410_GPA3_OUT (0<<3) #define S3C2410_GPA3_ADDR18 (1<<3) -#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4) -#define S3C2410_GPA4_OUT (0<<4) #define S3C2410_GPA4_ADDR19 (1<<4) -#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5) -#define S3C2410_GPA5_OUT (0<<5) #define S3C2410_GPA5_ADDR20 (1<<5) -#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6) -#define S3C2410_GPA6_OUT (0<<6) #define S3C2410_GPA6_ADDR21 (1<<6) -#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7) -#define S3C2410_GPA7_OUT (0<<7) #define S3C2410_GPA7_ADDR22 (1<<7) -#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8) -#define S3C2410_GPA8_OUT (0<<8) #define S3C2410_GPA8_ADDR23 (1<<8) -#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9) -#define S3C2410_GPA9_OUT (0<<9) #define S3C2410_GPA9_ADDR24 (1<<9) -#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10) -#define S3C2410_GPA10_OUT (0<<10) #define S3C2410_GPA10_ADDR25 (1<<10) #define S3C2400_GPA10_SCKE (1<<10) -#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11) -#define S3C2410_GPA11_OUT (0<<11) #define S3C2410_GPA11_ADDR26 (1<<11) #define S3C2400_GPA11_nCAS0 (1<<11) -#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12) -#define S3C2410_GPA12_OUT (0<<12) #define S3C2410_GPA12_nGCS1 (1<<12) #define S3C2400_GPA12_nCAS1 (1<<12) -#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13) -#define S3C2410_GPA13_OUT (0<<13) #define S3C2410_GPA13_nGCS2 (1<<13) #define S3C2400_GPA13_nGCS1 (1<<13) -#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14) -#define S3C2410_GPA14_OUT (0<<14) #define S3C2410_GPA14_nGCS3 (1<<14) #define S3C2400_GPA14_nGCS2 (1<<14) -#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15) -#define S3C2410_GPA15_OUT (0<<15) #define S3C2410_GPA15_nGCS4 (1<<15) #define S3C2400_GPA15_nGCS3 (1<<15) -#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16) -#define S3C2410_GPA16_OUT (0<<16) #define S3C2410_GPA16_nGCS5 (1<<16) #define S3C2400_GPA16_nGCS4 (1<<16) -#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17) -#define S3C2410_GPA17_OUT (0<<17) #define S3C2410_GPA17_CLE (1<<17) #define S3C2400_GPA17_nGCS5 (1<<17) -#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18) -#define S3C2410_GPA18_OUT (0<<18) #define S3C2410_GPA18_ALE (1<<18) -#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19) -#define S3C2410_GPA19_OUT (0<<19) #define S3C2410_GPA19_nFWE (1<<19) -#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20) -#define S3C2410_GPA20_OUT (0<<20) #define S3C2410_GPA20_nFRE (1<<20) -#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21) -#define S3C2410_GPA21_OUT (0<<21) #define S3C2410_GPA21_nRSTOUT (1<<21) -#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22) -#define S3C2410_GPA22_OUT (0<<22) #define S3C2410_GPA22_nFCE (1<<22) /* 0x08 and 0x0c are reserved on S3C2410 */ @@ -194,107 +148,69 @@ /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ -#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0) -#define S3C2410_GPB0_INP (0x00 << 0) -#define S3C2410_GPB0_OUTP (0x01 << 0) #define S3C2410_GPB0_TOUT0 (0x02 << 0) #define S3C2400_GPB0_DATA16 (0x02 << 0) -#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1) -#define S3C2410_GPB1_INP (0x00 << 2) -#define S3C2410_GPB1_OUTP (0x01 << 2) #define S3C2410_GPB1_TOUT1 (0x02 << 2) #define S3C2400_GPB1_DATA17 (0x02 << 2) -#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2) -#define S3C2410_GPB2_INP (0x00 << 4) -#define S3C2410_GPB2_OUTP (0x01 << 4) #define S3C2410_GPB2_TOUT2 (0x02 << 4) #define S3C2400_GPB2_DATA18 (0x02 << 4) #define S3C2400_GPB2_TCLK1 (0x03 << 4) -#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3) -#define S3C2410_GPB3_INP (0x00 << 6) -#define S3C2410_GPB3_OUTP (0x01 << 6) #define S3C2410_GPB3_TOUT3 (0x02 << 6) #define S3C2400_GPB3_DATA19 (0x02 << 6) #define S3C2400_GPB3_TXD1 (0x03 << 6) -#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4) -#define S3C2410_GPB4_INP (0x00 << 8) -#define S3C2410_GPB4_OUTP (0x01 << 8) #define S3C2410_GPB4_TCLK0 (0x02 << 8) #define S3C2400_GPB4_DATA20 (0x02 << 8) #define S3C2410_GPB4_MASK (0x03 << 8) #define S3C2400_GPB4_RXD1 (0x03 << 8) #define S3C2400_GPB4_MASK (0x03 << 8) -#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5) -#define S3C2410_GPB5_INP (0x00 << 10) -#define S3C2410_GPB5_OUTP (0x01 << 10) #define S3C2410_GPB5_nXBACK (0x02 << 10) #define S3C2443_GPB5_XBACK (0x03 << 10) #define S3C2400_GPB5_DATA21 (0x02 << 10) #define S3C2400_GPB5_nCTS1 (0x03 << 10) -#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6) -#define S3C2410_GPB6_INP (0x00 << 12) -#define S3C2410_GPB6_OUTP (0x01 << 12) #define S3C2410_GPB6_nXBREQ (0x02 << 12) #define S3C2443_GPB6_XBREQ (0x03 << 12) #define S3C2400_GPB6_DATA22 (0x02 << 12) #define S3C2400_GPB6_nRTS1 (0x03 << 12) -#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7) -#define S3C2410_GPB7_INP (0x00 << 14) -#define S3C2410_GPB7_OUTP (0x01 << 14) #define S3C2410_GPB7_nXDACK1 (0x02 << 14) #define S3C2443_GPB7_XDACK1 (0x03 << 14) #define S3C2400_GPB7_DATA23 (0x02 << 14) -#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8) -#define S3C2410_GPB8_INP (0x00 << 16) -#define S3C2410_GPB8_OUTP (0x01 << 16) #define S3C2410_GPB8_nXDREQ1 (0x02 << 16) #define S3C2400_GPB8_DATA24 (0x02 << 16) -#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9) -#define S3C2410_GPB9_INP (0x00 << 18) -#define S3C2410_GPB9_OUTP (0x01 << 18) #define S3C2410_GPB9_nXDACK0 (0x02 << 18) #define S3C2443_GPB9_XDACK0 (0x03 << 18) #define S3C2400_GPB9_DATA25 (0x02 << 18) #define S3C2400_GPB9_I2SSDI (0x03 << 18) -#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10) -#define S3C2410_GPB10_INP (0x00 << 20) -#define S3C2410_GPB10_OUTP (0x01 << 20) #define S3C2410_GPB10_nXDRE0 (0x02 << 20) #define S3C2443_GPB10_XDREQ0 (0x03 << 20) #define S3C2400_GPB10_DATA26 (0x02 << 20) #define S3C2400_GPB10_nSS (0x03 << 20) -#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11) #define S3C2400_GPB11_INP (0x00 << 22) #define S3C2400_GPB11_OUTP (0x01 << 22) #define S3C2400_GPB11_DATA27 (0x02 << 22) -#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12) #define S3C2400_GPB12_INP (0x00 << 24) #define S3C2400_GPB12_OUTP (0x01 << 24) #define S3C2400_GPB12_DATA28 (0x02 << 24) -#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13) #define S3C2400_GPB13_INP (0x00 << 26) #define S3C2400_GPB13_OUTP (0x01 << 26) #define S3C2400_GPB13_DATA29 (0x02 << 26) -#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14) #define S3C2400_GPB14_INP (0x00 << 28) #define S3C2400_GPB14_OUTP (0x01 << 28) #define S3C2400_GPB14_DATA30 (0x02 << 28) -#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15) #define S3C2400_GPB15_INP (0x00 << 30) #define S3C2400_GPB15_OUTP (0x01 << 30) #define S3C2400_GPB15_DATA31 (0x02 << 30) @@ -315,99 +231,51 @@ #define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) #define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) -#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0) -#define S3C2410_GPC0_INP (0x00 << 0) -#define S3C2410_GPC0_OUTP (0x01 << 0) #define S3C2410_GPC0_LEND (0x02 << 0) #define S3C2400_GPC0_VD0 (0x02 << 0) -#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1) -#define S3C2410_GPC1_INP (0x00 << 2) -#define S3C2410_GPC1_OUTP (0x01 << 2) #define S3C2410_GPC1_VCLK (0x02 << 2) #define S3C2400_GPC1_VD1 (0x02 << 2) -#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2) -#define S3C2410_GPC2_INP (0x00 << 4) -#define S3C2410_GPC2_OUTP (0x01 << 4) #define S3C2410_GPC2_VLINE (0x02 << 4) #define S3C2400_GPC2_VD2 (0x02 << 4) -#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3) -#define S3C2410_GPC3_INP (0x00 << 6) -#define S3C2410_GPC3_OUTP (0x01 << 6) #define S3C2410_GPC3_VFRAME (0x02 << 6) #define S3C2400_GPC3_VD3 (0x02 << 6) -#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4) -#define S3C2410_GPC4_INP (0x00 << 8) -#define S3C2410_GPC4_OUTP (0x01 << 8) #define S3C2410_GPC4_VM (0x02 << 8) #define S3C2400_GPC4_VD4 (0x02 << 8) -#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5) -#define S3C2410_GPC5_INP (0x00 << 10) -#define S3C2410_GPC5_OUTP (0x01 << 10) #define S3C2410_GPC5_LCDVF0 (0x02 << 10) #define S3C2400_GPC5_VD5 (0x02 << 10) -#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6) -#define S3C2410_GPC6_INP (0x00 << 12) -#define S3C2410_GPC6_OUTP (0x01 << 12) #define S3C2410_GPC6_LCDVF1 (0x02 << 12) #define S3C2400_GPC6_VD6 (0x02 << 12) -#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7) -#define S3C2410_GPC7_INP (0x00 << 14) -#define S3C2410_GPC7_OUTP (0x01 << 14) #define S3C2410_GPC7_LCDVF2 (0x02 << 14) #define S3C2400_GPC7_VD7 (0x02 << 14) -#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8) -#define S3C2410_GPC8_INP (0x00 << 16) -#define S3C2410_GPC8_OUTP (0x01 << 16) #define S3C2410_GPC8_VD0 (0x02 << 16) #define S3C2400_GPC8_VD8 (0x02 << 16) -#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9) -#define S3C2410_GPC9_INP (0x00 << 18) -#define S3C2410_GPC9_OUTP (0x01 << 18) #define S3C2410_GPC9_VD1 (0x02 << 18) #define S3C2400_GPC9_VD9 (0x02 << 18) -#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10) -#define S3C2410_GPC10_INP (0x00 << 20) -#define S3C2410_GPC10_OUTP (0x01 << 20) #define S3C2410_GPC10_VD2 (0x02 << 20) #define S3C2400_GPC10_VD10 (0x02 << 20) -#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11) -#define S3C2410_GPC11_INP (0x00 << 22) -#define S3C2410_GPC11_OUTP (0x01 << 22) #define S3C2410_GPC11_VD3 (0x02 << 22) #define S3C2400_GPC11_VD11 (0x02 << 22) -#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12) -#define S3C2410_GPC12_INP (0x00 << 24) -#define S3C2410_GPC12_OUTP (0x01 << 24) #define S3C2410_GPC12_VD4 (0x02 << 24) #define S3C2400_GPC12_VD12 (0x02 << 24) -#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13) -#define S3C2410_GPC13_INP (0x00 << 26) -#define S3C2410_GPC13_OUTP (0x01 << 26) #define S3C2410_GPC13_VD5 (0x02 << 26) #define S3C2400_GPC13_VD13 (0x02 << 26) -#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14) -#define S3C2410_GPC14_INP (0x00 << 28) -#define S3C2410_GPC14_OUTP (0x01 << 28) #define S3C2410_GPC14_VD6 (0x02 << 28) #define S3C2400_GPC14_VD14 (0x02 << 28) -#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15) -#define S3C2410_GPC15_INP (0x00 << 30) -#define S3C2410_GPC15_OUTP (0x01 << 30) #define S3C2410_GPC15_VD7 (0x02 << 30) #define S3C2400_GPC15_VD15 (0x02 << 30) @@ -432,99 +300,51 @@ #define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) #define S3C2400_GPDUP S3C2410_GPIOREG(0x28) -#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0) -#define S3C2410_GPD0_INP (0x00 << 0) -#define S3C2410_GPD0_OUTP (0x01 << 0) #define S3C2410_GPD0_VD8 (0x02 << 0) #define S3C2400_GPD0_VFRAME (0x02 << 0) #define S3C2442_GPD0_nSPICS1 (0x03 << 0) -#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1) -#define S3C2410_GPD1_INP (0x00 << 2) -#define S3C2410_GPD1_OUTP (0x01 << 2) #define S3C2410_GPD1_VD9 (0x02 << 2) #define S3C2400_GPD1_VM (0x02 << 2) #define S3C2442_GPD1_SPICLK1 (0x03 << 2) -#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2) -#define S3C2410_GPD2_INP (0x00 << 4) -#define S3C2410_GPD2_OUTP (0x01 << 4) #define S3C2410_GPD2_VD10 (0x02 << 4) #define S3C2400_GPD2_VLINE (0x02 << 4) -#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3) -#define S3C2410_GPD3_INP (0x00 << 6) -#define S3C2410_GPD3_OUTP (0x01 << 6) #define S3C2410_GPD3_VD11 (0x02 << 6) #define S3C2400_GPD3_VCLK (0x02 << 6) -#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4) -#define S3C2410_GPD4_INP (0x00 << 8) -#define S3C2410_GPD4_OUTP (0x01 << 8) #define S3C2410_GPD4_VD12 (0x02 << 8) #define S3C2400_GPD4_LEND (0x02 << 8) -#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5) -#define S3C2410_GPD5_INP (0x00 << 10) -#define S3C2410_GPD5_OUTP (0x01 << 10) #define S3C2410_GPD5_VD13 (0x02 << 10) #define S3C2400_GPD5_TOUT0 (0x02 << 10) -#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6) -#define S3C2410_GPD6_INP (0x00 << 12) -#define S3C2410_GPD6_OUTP (0x01 << 12) #define S3C2410_GPD6_VD14 (0x02 << 12) #define S3C2400_GPD6_TOUT1 (0x02 << 12) -#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7) -#define S3C2410_GPD7_INP (0x00 << 14) -#define S3C2410_GPD7_OUTP (0x01 << 14) #define S3C2410_GPD7_VD15 (0x02 << 14) #define S3C2400_GPD7_TOUT2 (0x02 << 14) -#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8) -#define S3C2410_GPD8_INP (0x00 << 16) -#define S3C2410_GPD8_OUTP (0x01 << 16) #define S3C2410_GPD8_VD16 (0x02 << 16) #define S3C2400_GPD8_TOUT3 (0x02 << 16) -#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9) -#define S3C2410_GPD9_INP (0x00 << 18) -#define S3C2410_GPD9_OUTP (0x01 << 18) #define S3C2410_GPD9_VD17 (0x02 << 18) #define S3C2400_GPD9_TCLK0 (0x02 << 18) #define S3C2410_GPD9_MASK (0x03 << 18) -#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10) -#define S3C2410_GPD10_INP (0x00 << 20) -#define S3C2410_GPD10_OUTP (0x01 << 20) #define S3C2410_GPD10_VD18 (0x02 << 20) #define S3C2400_GPD10_nWAIT (0x02 << 20) -#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11) -#define S3C2410_GPD11_INP (0x00 << 22) -#define S3C2410_GPD11_OUTP (0x01 << 22) #define S3C2410_GPD11_VD19 (0x02 << 22) -#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12) -#define S3C2410_GPD12_INP (0x00 << 24) -#define S3C2410_GPD12_OUTP (0x01 << 24) #define S3C2410_GPD12_VD20 (0x02 << 24) -#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13) -#define S3C2410_GPD13_INP (0x00 << 26) -#define S3C2410_GPD13_OUTP (0x01 << 26) #define S3C2410_GPD13_VD21 (0x02 << 26) -#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14) -#define S3C2410_GPD14_INP (0x00 << 28) -#define S3C2410_GPD14_OUTP (0x01 << 28) #define S3C2410_GPD14_VD22 (0x02 << 28) #define S3C2410_GPD14_nSS1 (0x03 << 28) -#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15) -#define S3C2410_GPD15_INP (0x00 << 30) -#define S3C2410_GPD15_OUTP (0x01 << 30) #define S3C2410_GPD15_VD23 (0x02 << 30) #define S3C2410_GPD15_nSS0 (0x03 << 30) @@ -550,34 +370,22 @@ #define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) #define S3C2400_GPEUP S3C2410_GPIOREG(0x34) -#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0) -#define S3C2410_GPE0_INP (0x00 << 0) -#define S3C2410_GPE0_OUTP (0x01 << 0) #define S3C2410_GPE0_I2SLRCK (0x02 << 0) #define S3C2443_GPE0_AC_nRESET (0x03 << 0) #define S3C2400_GPE0_EINT0 (0x02 << 0) #define S3C2410_GPE0_MASK (0x03 << 0) -#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1) -#define S3C2410_GPE1_INP (0x00 << 2) -#define S3C2410_GPE1_OUTP (0x01 << 2) #define S3C2410_GPE1_I2SSCLK (0x02 << 2) #define S3C2443_GPE1_AC_SYNC (0x03 << 2) #define S3C2400_GPE1_EINT1 (0x02 << 2) #define S3C2400_GPE1_nSS (0x03 << 2) #define S3C2410_GPE1_MASK (0x03 << 2) -#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2) -#define S3C2410_GPE2_INP (0x00 << 4) -#define S3C2410_GPE2_OUTP (0x01 << 4) #define S3C2410_GPE2_CDCLK (0x02 << 4) #define S3C2443_GPE2_AC_BITCLK (0x03 << 4) #define S3C2400_GPE2_EINT2 (0x02 << 4) #define S3C2400_GPE2_I2SSDI (0x03 << 4) -#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3) -#define S3C2410_GPE3_INP (0x00 << 6) -#define S3C2410_GPE3_OUTP (0x01 << 6) #define S3C2410_GPE3_I2SSDI (0x02 << 6) #define S3C2443_GPE3_AC_SDI (0x03 << 6) #define S3C2400_GPE3_EINT3 (0x02 << 6) @@ -585,9 +393,6 @@ #define S3C2410_GPE3_nSS0 (0x03 << 6) #define S3C2410_GPE3_MASK (0x03 << 6) -#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4) -#define S3C2410_GPE4_INP (0x00 << 8) -#define S3C2410_GPE4_OUTP (0x01 << 8) #define S3C2410_GPE4_I2SSDO (0x02 << 8) #define S3C2443_GPE4_AC_SDO (0x03 << 8) #define S3C2400_GPE4_EINT4 (0x02 << 8) @@ -595,81 +400,48 @@ #define S3C2410_GPE4_I2SSDI (0x03 << 8) #define S3C2410_GPE4_MASK (0x03 << 8) -#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5) -#define S3C2410_GPE5_INP (0x00 << 10) -#define S3C2410_GPE5_OUTP (0x01 << 10) #define S3C2410_GPE5_SDCLK (0x02 << 10) #define S3C2443_GPE5_SD1_CLK (0x02 << 10) #define S3C2400_GPE5_EINT5 (0x02 << 10) #define S3C2400_GPE5_TCLK1 (0x03 << 10) -#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6) -#define S3C2410_GPE6_INP (0x00 << 12) -#define S3C2410_GPE6_OUTP (0x01 << 12) #define S3C2410_GPE6_SDCMD (0x02 << 12) #define S3C2443_GPE6_SD1_CMD (0x02 << 12) #define S3C2443_GPE6_AC_BITCLK (0x03 << 12) #define S3C2400_GPE6_EINT6 (0x02 << 12) -#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7) -#define S3C2410_GPE7_INP (0x00 << 14) -#define S3C2410_GPE7_OUTP (0x01 << 14) #define S3C2410_GPE7_SDDAT0 (0x02 << 14) #define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) #define S3C2443_GPE7_AC_SDI (0x03 << 14) #define S3C2400_GPE7_EINT7 (0x02 << 14) -#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8) -#define S3C2410_GPE8_INP (0x00 << 16) -#define S3C2410_GPE8_OUTP (0x01 << 16) #define S3C2410_GPE8_SDDAT1 (0x02 << 16) #define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) #define S3C2443_GPE8_AC_SDO (0x03 << 16) #define S3C2400_GPE8_nXDACK0 (0x02 << 16) -#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9) -#define S3C2410_GPE9_INP (0x00 << 18) -#define S3C2410_GPE9_OUTP (0x01 << 18) #define S3C2410_GPE9_SDDAT2 (0x02 << 18) #define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) #define S3C2443_GPE9_AC_SYNC (0x03 << 18) #define S3C2400_GPE9_nXDACK1 (0x02 << 18) #define S3C2400_GPE9_nXBACK (0x03 << 18) -#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10) -#define S3C2410_GPE10_INP (0x00 << 20) -#define S3C2410_GPE10_OUTP (0x01 << 20) #define S3C2410_GPE10_SDDAT3 (0x02 << 20) #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) #define S3C2443_GPE10_AC_nRESET (0x03 << 20) #define S3C2400_GPE10_nXDREQ0 (0x02 << 20) -#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11) -#define S3C2410_GPE11_INP (0x00 << 22) -#define S3C2410_GPE11_OUTP (0x01 << 22) #define S3C2410_GPE11_SPIMISO0 (0x02 << 22) #define S3C2400_GPE11_nXDREQ1 (0x02 << 22) #define S3C2400_GPE11_nXBREQ (0x03 << 22) -#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12) -#define S3C2410_GPE12_INP (0x00 << 24) -#define S3C2410_GPE12_OUTP (0x01 << 24) #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) -#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13) -#define S3C2410_GPE13_INP (0x00 << 26) -#define S3C2410_GPE13_OUTP (0x01 << 26) #define S3C2410_GPE13_SPICLK0 (0x02 << 26) -#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14) -#define S3C2410_GPE14_INP (0x00 << 28) -#define S3C2410_GPE14_OUTP (0x01 << 28) #define S3C2410_GPE14_IICSCL (0x02 << 28) #define S3C2410_GPE14_MASK (0x03 << 28) -#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15) -#define S3C2410_GPE15_INP (0x00 << 30) -#define S3C2410_GPE15_OUTP (0x01 << 30) #define S3C2410_GPE15_IICSDA (0x02 << 30) #define S3C2410_GPE15_MASK (0x03 << 30) @@ -705,55 +477,31 @@ #define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) #define S3C2400_GPFUP S3C2410_GPIOREG(0x40) -#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0) -#define S3C2410_GPF0_INP (0x00 << 0) -#define S3C2410_GPF0_OUTP (0x01 << 0) #define S3C2410_GPF0_EINT0 (0x02 << 0) #define S3C2400_GPF0_RXD0 (0x02 << 0) -#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1) -#define S3C2410_GPF1_INP (0x00 << 2) -#define S3C2410_GPF1_OUTP (0x01 << 2) #define S3C2410_GPF1_EINT1 (0x02 << 2) #define S3C2400_GPF1_RXD1 (0x02 << 2) #define S3C2400_GPF1_IICSDA (0x03 << 2) -#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2) -#define S3C2410_GPF2_INP (0x00 << 4) -#define S3C2410_GPF2_OUTP (0x01 << 4) #define S3C2410_GPF2_EINT2 (0x02 << 4) #define S3C2400_GPF2_TXD0 (0x02 << 4) -#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3) -#define S3C2410_GPF3_INP (0x00 << 6) -#define S3C2410_GPF3_OUTP (0x01 << 6) #define S3C2410_GPF3_EINT3 (0x02 << 6) #define S3C2400_GPF3_TXD1 (0x02 << 6) #define S3C2400_GPF3_IICSCL (0x03 << 6) -#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4) -#define S3C2410_GPF4_INP (0x00 << 8) -#define S3C2410_GPF4_OUTP (0x01 << 8) #define S3C2410_GPF4_EINT4 (0x02 << 8) #define S3C2400_GPF4_nRTS0 (0x02 << 8) #define S3C2400_GPF4_nXBACK (0x03 << 8) -#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5) -#define S3C2410_GPF5_INP (0x00 << 10) -#define S3C2410_GPF5_OUTP (0x01 << 10) #define S3C2410_GPF5_EINT5 (0x02 << 10) #define S3C2400_GPF5_nCTS0 (0x02 << 10) #define S3C2400_GPF5_nXBREQ (0x03 << 10) -#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6) -#define S3C2410_GPF6_INP (0x00 << 12) -#define S3C2410_GPF6_OUTP (0x01 << 12) #define S3C2410_GPF6_EINT6 (0x02 << 12) #define S3C2400_GPF6_CLKOUT (0x02 << 12) -#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7) -#define S3C2410_GPF7_INP (0x00 << 14) -#define S3C2410_GPF7_OUTP (0x01 << 14) #define S3C2410_GPF7_EINT7 (0x02 << 14) #define S3C2410_GPF_PUPDIS(x) (1<<(x)) @@ -778,117 +526,69 @@ #define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) #define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) -#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0) -#define S3C2410_GPG0_INP (0x00 << 0) -#define S3C2410_GPG0_OUTP (0x01 << 0) #define S3C2410_GPG0_EINT8 (0x02 << 0) #define S3C2400_GPG0_I2SLRCK (0x02 << 0) -#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1) -#define S3C2410_GPG1_INP (0x00 << 2) -#define S3C2410_GPG1_OUTP (0x01 << 2) #define S3C2410_GPG1_EINT9 (0x02 << 2) #define S3C2400_GPG1_I2SSCLK (0x02 << 2) -#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2) -#define S3C2410_GPG2_INP (0x00 << 4) -#define S3C2410_GPG2_OUTP (0x01 << 4) #define S3C2410_GPG2_EINT10 (0x02 << 4) #define S3C2410_GPG2_nSS0 (0x03 << 4) #define S3C2400_GPG2_CDCLK (0x02 << 4) -#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) -#define S3C2410_GPG3_INP (0x00 << 6) -#define S3C2410_GPG3_OUTP (0x01 << 6) #define S3C2410_GPG3_EINT11 (0x02 << 6) #define S3C2410_GPG3_nSS1 (0x03 << 6) #define S3C2400_GPG3_I2SSDO (0x02 << 6) #define S3C2400_GPG3_I2SSDI (0x03 << 6) -#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4) -#define S3C2410_GPG4_INP (0x00 << 8) -#define S3C2410_GPG4_OUTP (0x01 << 8) #define S3C2410_GPG4_EINT12 (0x02 << 8) #define S3C2400_GPG4_MMCCLK (0x02 << 8) #define S3C2400_GPG4_I2SSDI (0x03 << 8) #define S3C2410_GPG4_LCDPWREN (0x03 << 8) #define S3C2443_GPG4_LCDPWRDN (0x03 << 8) -#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5) -#define S3C2410_GPG5_INP (0x00 << 10) -#define S3C2410_GPG5_OUTP (0x01 << 10) #define S3C2410_GPG5_EINT13 (0x02 << 10) #define S3C2400_GPG5_MMCCMD (0x02 << 10) #define S3C2400_GPG5_IICSDA (0x03 << 10) #define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ -#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6) -#define S3C2410_GPG6_INP (0x00 << 12) -#define S3C2410_GPG6_OUTP (0x01 << 12) #define S3C2410_GPG6_EINT14 (0x02 << 12) #define S3C2400_GPG6_MMCDAT (0x02 << 12) #define S3C2400_GPG6_IICSCL (0x03 << 12) #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) -#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7) -#define S3C2410_GPG7_INP (0x00 << 14) -#define S3C2410_GPG7_OUTP (0x01 << 14) #define S3C2410_GPG7_EINT15 (0x02 << 14) #define S3C2410_GPG7_SPICLK1 (0x03 << 14) #define S3C2400_GPG7_SPIMISO (0x02 << 14) #define S3C2400_GPG7_IICSDA (0x03 << 14) -#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8) -#define S3C2410_GPG8_INP (0x00 << 16) -#define S3C2410_GPG8_OUTP (0x01 << 16) #define S3C2410_GPG8_EINT16 (0x02 << 16) #define S3C2400_GPG8_SPIMOSI (0x02 << 16) #define S3C2400_GPG8_IICSCL (0x03 << 16) -#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9) -#define S3C2410_GPG9_INP (0x00 << 18) -#define S3C2410_GPG9_OUTP (0x01 << 18) #define S3C2410_GPG9_EINT17 (0x02 << 18) #define S3C2400_GPG9_SPICLK (0x02 << 18) #define S3C2400_GPG9_MMCCLK (0x03 << 18) -#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10) -#define S3C2410_GPG10_INP (0x00 << 20) -#define S3C2410_GPG10_OUTP (0x01 << 20) #define S3C2410_GPG10_EINT18 (0x02 << 20) -#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11) -#define S3C2410_GPG11_INP (0x00 << 22) -#define S3C2410_GPG11_OUTP (0x01 << 22) #define S3C2410_GPG11_EINT19 (0x02 << 22) #define S3C2410_GPG11_TCLK1 (0x03 << 22) #define S3C2443_GPG11_CF_nIREQ (0x03 << 22) -#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12) -#define S3C2410_GPG12_INP (0x00 << 24) -#define S3C2410_GPG12_OUTP (0x01 << 24) #define S3C2410_GPG12_EINT20 (0x02 << 24) #define S3C2410_GPG12_XMON (0x03 << 24) #define S3C2442_GPG12_nSPICS0 (0x03 << 24) #define S3C2443_GPG12_nINPACK (0x03 << 24) -#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13) -#define S3C2410_GPG13_INP (0x00 << 26) -#define S3C2410_GPG13_OUTP (0x01 << 26) #define S3C2410_GPG13_EINT21 (0x02 << 26) #define S3C2410_GPG13_nXPON (0x03 << 26) #define S3C2443_GPG13_CF_nREG (0x03 << 26) -#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14) -#define S3C2410_GPG14_INP (0x00 << 28) -#define S3C2410_GPG14_OUTP (0x01 << 28) #define S3C2410_GPG14_EINT22 (0x02 << 28) #define S3C2410_GPG14_YMON (0x03 << 28) #define S3C2443_GPG14_CF_RESET (0x03 << 28) -#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15) -#define S3C2410_GPG15_INP (0x00 << 30) -#define S3C2410_GPG15_OUTP (0x01 << 30) #define S3C2410_GPG15_EINT23 (0x02 << 30) #define S3C2410_GPG15_nYPON (0x03 << 30) #define S3C2443_GPG15_CF_PWR (0x03 << 30) @@ -907,62 +607,29 @@ #define S3C2410_GPHDAT S3C2410_GPIOREG(0x74) #define S3C2410_GPHUP S3C2410_GPIOREG(0x78) -#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0) -#define S3C2410_GPH0_INP (0x00 << 0) -#define S3C2410_GPH0_OUTP (0x01 << 0) #define S3C2410_GPH0_nCTS0 (0x02 << 0) -#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1) -#define S3C2410_GPH1_INP (0x00 << 2) -#define S3C2410_GPH1_OUTP (0x01 << 2) #define S3C2410_GPH1_nRTS0 (0x02 << 2) -#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2) -#define S3C2410_GPH2_INP (0x00 << 4) -#define S3C2410_GPH2_OUTP (0x01 << 4) #define S3C2410_GPH2_TXD0 (0x02 << 4) -#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3) -#define S3C2410_GPH3_INP (0x00 << 6) -#define S3C2410_GPH3_OUTP (0x01 << 6) #define S3C2410_GPH3_RXD0 (0x02 << 6) -#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4) -#define S3C2410_GPH4_INP (0x00 << 8) -#define S3C2410_GPH4_OUTP (0x01 << 8) #define S3C2410_GPH4_TXD1 (0x02 << 8) -#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5) -#define S3C2410_GPH5_INP (0x00 << 10) -#define S3C2410_GPH5_OUTP (0x01 << 10) #define S3C2410_GPH5_RXD1 (0x02 << 10) -#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6) -#define S3C2410_GPH6_INP (0x00 << 12) -#define S3C2410_GPH6_OUTP (0x01 << 12) #define S3C2410_GPH6_TXD2 (0x02 << 12) #define S3C2410_GPH6_nRTS1 (0x03 << 12) -#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7) -#define S3C2410_GPH7_INP (0x00 << 14) -#define S3C2410_GPH7_OUTP (0x01 << 14) #define S3C2410_GPH7_RXD2 (0x02 << 14) #define S3C2410_GPH7_nCTS1 (0x03 << 14) -#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8) -#define S3C2410_GPH8_INP (0x00 << 16) -#define S3C2410_GPH8_OUTP (0x01 << 16) #define S3C2410_GPH8_UCLK (0x02 << 16) -#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9) -#define S3C2410_GPH9_INP (0x00 << 18) -#define S3C2410_GPH9_OUTP (0x01 << 18) #define S3C2410_GPH9_CLKOUT0 (0x02 << 18) #define S3C2442_GPH9_nSPICS0 (0x03 << 18) -#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10) -#define S3C2410_GPH10_INP (0x00 << 20) -#define S3C2410_GPH10_OUTP (0x01 << 20) #define S3C2410_GPH10_CLKOUT1 (0x02 << 20) /* The S3C2412 and S3C2413 move the GPJ register set to after diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h index b8687f71c304..6faadcee7729 100644 --- a/arch/arm/mach-s3c2410/include/mach/system-reset.h +++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h @@ -11,21 +11,13 @@ */ #include <mach/hardware.h> -#include <linux/io.h> - -#include <plat/regs-watchdog.h> -#include <mach/regs-clock.h> - -#include <linux/clk.h> -#include <linux/err.h> +#include <plat/watchdog-reset.h> extern void (*s3c24xx_reset_hook)(void); static void arch_reset(char mode, const char *cmd) { - struct clk *wdtclk; - if (mode == 's') { cpu_reset(0); } @@ -33,31 +25,7 @@ arch_reset(char mode, const char *cmd) if (s3c24xx_reset_hook) s3c24xx_reset_hook(); - printk("arch_reset: attempting watchdog reset\n"); - - __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); - - /* put initial values into count and data */ - __raw_writel(0x80, S3C2410_WTCNT); - __raw_writel(0x80, S3C2410_WTDAT); - - /* set the watchdog to go and reset... */ - __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | - S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); - - /* wait for reset to assert... */ - mdelay(500); - - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); + arch_wdt_reset(); /* we'll take a jump through zero as a poor second */ cpu_reset(0); diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 6d6995afeb43..06a84adfb13f 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -32,6 +32,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/device.h> #include <linux/platform_device.h> #include <linux/proc_fs.h> @@ -224,8 +225,8 @@ static void amlm5900_init_pm(void) } else { enable_irq_wake(IRQ_EINT9); /* configure the suspend/resume status pin */ - s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); - s3c2410_gpio_pullup(S3C2410_GPF2, 0); + s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_pullup(S3C2410_GPF(2), 0); } } static void __init amlm5900_init(void) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 8637dea5e150..ce3baba2cd7f 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { static int bast_pm_suspend(struct sys_device *sd, pm_message_t state) { /* ensure that an nRESET is not generated on resume. */ - s3c2410_gpio_setpin(S3C2410_GPA21, 1); - s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT); + s3c2410_gpio_setpin(S3C2410_GPA(21), 1); + s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); return 0; } static int bast_pm_resume(struct sys_device *sd) { - s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT); + s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); return 0; } @@ -591,8 +592,6 @@ static void __init bast_map_io(void) s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); - - usb_simtec_init(); } static void __init bast_init(void) @@ -607,6 +606,7 @@ static void __init bast_init(void) i2c_register_board_info(0, bast_i2c_devs, ARRAY_SIZE(bast_i2c_devs)); + usb_simtec_init(); nor_simtec_init(); } diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 7a7c4da4c256..d9cd5ddecf4a 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { .udc_command = h1940_udc_pullup, - .vbus_pin = S3C2410_GPG5, + .vbus_pin = S3C2410_GPG(5), .vbus_pin_inverted = 1, }; diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 2b83f8707710..0f6ed61af415 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -19,6 +19,7 @@ #include <linux/gpio_keys.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/input.h> #include <linux/interrupt.h> #include <linux/platform_device.h> @@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) { switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPB3, 1); + s3c2410_gpio_setpin(S3C2410_GPB(3), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPB3, 0); + s3c2410_gpio_setpin(S3C2410_GPB(3), 0); break; case S3C2410_UDC_P_RESET : break; @@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { .udc_command = n30_udc_pullup, - .vbus_pin = S3C2410_GPG1, + .vbus_pin = S3C2410_GPG(1), .vbus_pin_inverted = 0, }; static struct gpio_keys_button n30_buttons[] = { { - .gpio = S3C2410_GPF0, + .gpio = S3C2410_GPF(0), .code = KEY_POWER, .desc = "Power", .active_low = 0, }, { - .gpio = S3C2410_GPG9, + .gpio = S3C2410_GPG(9), .code = KEY_UP, .desc = "Thumbwheel Up", .active_low = 0, }, { - .gpio = S3C2410_GPG8, + .gpio = S3C2410_GPG(8), .code = KEY_DOWN, .desc = "Thumbwheel Down", .active_low = 0, }, { - .gpio = S3C2410_GPG7, + .gpio = S3C2410_GPG(7), .code = KEY_ENTER, .desc = "Thumbwheel Press", .active_low = 0, }, { - .gpio = S3C2410_GPF7, + .gpio = S3C2410_GPF(7), .code = KEY_HOMEPAGE, .desc = "Home", .active_low = 0, }, { - .gpio = S3C2410_GPF6, + .gpio = S3C2410_GPF(6), .code = KEY_CALENDAR, .desc = "Calendar", .active_low = 0, }, { - .gpio = S3C2410_GPF5, + .gpio = S3C2410_GPF(5), .code = KEY_ADDRESSBOOK, .desc = "Contacts", .active_low = 0, }, { - .gpio = S3C2410_GPF4, + .gpio = S3C2410_GPF(4), .code = KEY_MAIL, .desc = "Mail", .active_low = 0, @@ -169,73 +170,73 @@ static struct platform_device n30_button_device = { static struct gpio_keys_button n35_buttons[] = { { - .gpio = S3C2410_GPF0, + .gpio = S3C2410_GPF(0), .code = KEY_POWER, .desc = "Power", .active_low = 0, }, { - .gpio = S3C2410_GPG9, + .gpio = S3C2410_GPG(9), .code = KEY_UP, .desc = "Joystick Up", .active_low = 0, }, { - .gpio = S3C2410_GPG8, + .gpio = S3C2410_GPG(8), .code = KEY_DOWN, .desc = "Joystick Down", .active_low = 0, }, { - .gpio = S3C2410_GPG6, + .gpio = S3C2410_GPG(6), .code = KEY_DOWN, .desc = "Joystick Left", .active_low = 0, }, { - .gpio = S3C2410_GPG5, + .gpio = S3C2410_GPG(5), .code = KEY_DOWN, .desc = "Joystick Right", .active_low = 0, }, { - .gpio = S3C2410_GPG7, + .gpio = S3C2410_GPG(7), .code = KEY_ENTER, .desc = "Joystick Press", .active_low = 0, }, { - .gpio = S3C2410_GPF7, + .gpio = S3C2410_GPF(7), .code = KEY_HOMEPAGE, .desc = "Home", .active_low = 0, }, { - .gpio = S3C2410_GPF6, + .gpio = S3C2410_GPF(6), .code = KEY_CALENDAR, .desc = "Calendar", .active_low = 0, }, { - .gpio = S3C2410_GPF5, + .gpio = S3C2410_GPF(5), .code = KEY_ADDRESSBOOK, .desc = "Contacts", .active_low = 0, }, { - .gpio = S3C2410_GPF4, + .gpio = S3C2410_GPF(4), .code = KEY_MAIL, .desc = "Mail", .active_low = 0, }, { - .gpio = S3C2410_GPF3, + .gpio = S3C2410_GPF(3), .code = SW_RADIO, .desc = "GPS Antenna", .active_low = 0, }, { - .gpio = S3C2410_GPG2, + .gpio = S3C2410_GPG(2), .code = SW_HEADPHONE_INSERT, .desc = "Headphone", .active_low = 0, @@ -259,7 +260,7 @@ static struct platform_device n35_button_device = { /* This is the bluetooth LED on the device. */ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .name = "blue_led", - .gpio = S3C2410_GPG6, + .gpio = S3C2410_GPG(6), .def_trigger = "", }; @@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = { static struct s3c24xx_led_platdata n30_warning_led_pdata = { .name = "warning_led", .flags = S3C24XX_LEDF_ACTLOW, - .gpio = S3C2410_GPD9, + .gpio = S3C2410_GPD(9), .def_trigger = "", }; diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 9f1ba9b63f70..2cc9849eb448 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -27,6 +27,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/serial_core.h> @@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = { /* LED */ static struct s3c24xx_led_platdata qt2410_pdata_led = { - .gpio = S3C2410_GPB0, + .gpio = S3C2410_GPB(0), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led", .def_trigger = "timer", @@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) { switch (cs) { case BITBANG_CS_ACTIVE: - s3c2410_gpio_setpin(S3C2410_GPB5, 0); + s3c2410_gpio_setpin(S3C2410_GPB(5), 0); break; case BITBANG_CS_INACTIVE: - s3c2410_gpio_setpin(S3C2410_GPB5, 1); + s3c2410_gpio_setpin(S3C2410_GPB(5), 1); break; } } static struct s3c2410_spigpio_info spi_gpio_cfg = { - .pin_clk = S3C2410_GPG7, - .pin_mosi = S3C2410_GPG6, - .pin_miso = S3C2410_GPG5, + .pin_clk = S3C2410_GPG(7), + .pin_mosi = S3C2410_GPG(6), + .pin_miso = S3C2410_GPG(5), .chip_select = &spi_gpio_cs, }; @@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB0, 1); + s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPB(0), 1); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); - s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); s3c_pm_init(); diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 61a1ea9c5c5c..1628cc773a2c 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -18,6 +18,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/dm9000.h> #include <linux/i2c.h> @@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = { static struct s3c24xx_led_platdata vr1000_led1_pdata = { .name = "led1", - .gpio = S3C2410_GPB0, + .gpio = S3C2410_GPB(0), .def_trigger = "", }; static struct s3c24xx_led_platdata vr1000_led2_pdata = { .name = "led2", - .gpio = S3C2410_GPB1, + .gpio = S3C2410_GPB(1), .def_trigger = "", }; static struct s3c24xx_led_platdata vr1000_led3_pdata = { .name = "led3", - .gpio = S3C2410_GPB2, + .gpio = S3C2410_GPB(2), .def_trigger = "", }; @@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = { static void vr1000_power_off(void) { - s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP); - s3c2410_gpio_setpin(S3C2410_GPB9, 1); + s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPB(9), 1); } static void __init vr1000_map_io(void) diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 87fc481d92d4..143e08a599d4 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -25,6 +25,7 @@ #include <linux/errno.h> #include <linux/time.h> #include <linux/sysdev.h> +#include <linux/gpio.h> #include <linux/io.h> #include <mach/hardware.h> @@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void) } if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF2, 1); + s3c2410_gpio_setpin(S3C2410_GPF(2), 1); } @@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev) __raw_writel(tmp, S3C2410_GSTATUS2); if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF2, 0); + s3c2410_gpio_setpin(S3C2410_GPF(2), 0); return 0; } diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 8331e8d97e20..6cd9377ddb82 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -18,9 +18,11 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/list.h> +#include <linux/gpio.h> #include <linux/timer.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/gpio.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -29,7 +31,6 @@ #include <mach/bast-map.h> #include <mach/bast-irq.h> -#include <mach/regs-gpio.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to) power_state[port] = to; if (power_state[0] && power_state[1]) - s3c2410_gpio_setpin(S3C2410_GPB4, 0); + gpio_set_value(S3C2410_GPB(4), 0); else - s3c2410_gpio_setpin(S3C2410_GPB4, 1); + gpio_set_value(S3C2410_GPB(4), 1); } static irqreturn_t @@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw) { struct s3c2410_hcd_info *info = pw; - if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) { + if (gpio_get_value(S3C2410_GPG(10)) == 0) { pr_debug("usb_simtec: over-current irq (oc detected)\n"); s3c2410_usb_report_oc(info, 3); } else { @@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = { int usb_simtec_init(void) { + int ret; + printk("USB Power Control, (c) 2004 Simtec Electronics\n"); - s3c_device_usb.dev.platform_data = &usb_simtec_info; - s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP); - s3c2410_gpio_setpin(S3C2410_GPB4, 1); + ret = gpio_request(S3C2410_GPB(4), "USB power control"); + if (ret < 0) { + pr_err("%s: failed to get GPB4\n", __func__); + return ret; + } + + ret = gpio_request(S3C2410_GPG(10), "USB overcurrent"); + if (ret < 0) { + pr_err("%s: failed to get GPG10\n", __func__); + gpio_free(S3C2410_GPB(4)); + return ret; + } + + /* turn power on */ + gpio_direction_output(S3C2410_GPB(4), 1); + gpio_direction_input(S3C2410_GPG(10)); + + s3c_device_usb.dev.platform_data = &usb_simtec_info; return 0; } diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index ca99564ae4b5..63586ffd0ae7 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -38,6 +38,7 @@ menu "S3C2412 Machines" config MACH_JIVE bool "Logitech Jive" select CPU_S3C2412 + select S3C_DEV_USB_HOST help Say Y here if you are using the Logitech Jive. @@ -50,6 +51,7 @@ config MACH_SMDK2413 select CPU_S3C2412 select MACH_S3C2413 select MACH_SMDK + select S3C_DEV_USB_HOST help Say Y here if you are using an SMDK2413 @@ -72,6 +74,7 @@ config MACH_SMDK2412 config MACH_VSTMS bool "VMSTMS" select CPU_S3C2412 + select S3C_DEV_USB_HOST help Say Y here if you are using an VSTMS board diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 9e3478506c6f..f8d16fc10bc6 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -20,12 +20,13 @@ #include <mach/dma.h> -#include <plat/dma.h> +#include <plat/dma-plat.h> #include <plat/cpu.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-ac97.h> +#include <plat/regs-dma.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 8f0d37d43b43..8df506eac903 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set) { printk(KERN_DEBUG "%s(%d)\n", __func__, set); - s3c2410_gpio_setpin(S3C2410_GPG13, set); - s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPG(13), set); + s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); } #undef LCD_UPPER_MARGIN @@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = { static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1); + s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_lcd_spi = { .bus_num = 1, - .pin_clk = S3C2410_GPG8, - .pin_mosi = S3C2410_GPB8, + .pin_clk = S3C2410_GPG(8), + .pin_mosi = S3C2410_GPB(8), .num_chipselect = 1, .chip_select = jive_lcd_spi_chipselect, }; @@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = { static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1); + s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_wm8750_spi = { .bus_num = 2, - .pin_clk = S3C2410_GPB4, - .pin_mosi = S3C2410_GPB9, + .pin_clk = S3C2410_GPB(4), + .pin_mosi = S3C2410_GPB(9), .num_chipselect = 1, .chip_select = jive_wm8750_chipselect, }; @@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = { }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { - .vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */ + .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */ }; /* Jive power management device */ @@ -529,8 +530,8 @@ static void jive_power_off(void) { printk(KERN_INFO "powering system down...\n"); - s3c2410_gpio_setpin(S3C2410_GPC5, 1); - s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); } static void __init jive_machine_init(void) @@ -634,22 +635,22 @@ static void __init jive_machine_init(void) /* initialise the spi */ - s3c2410_gpio_setpin(S3C2410_GPG13, 0); - s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPG(13), 0); + s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB7, 1); - s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPB(7), 1); + s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB6, 0); - s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPB(6), 0); + s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPG8, 1); - s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPG(8), 1); + s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); /* initialise the WM8750 spi */ - s3c2410_gpio_setpin(S3C2410_GPH10, 1); - s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPH(10), 1); + s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index eba66aa6bd20..9a5e43419722 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -17,6 +17,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPF2, 1); + s3c2410_gpio_setpin(S3C2410_GPF(2), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPF2, 0); + s3c2410_gpio_setpin(S3C2410_GPF(2), 0); break; case S3C2410_UDC_P_RESET : break; @@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ - s3c2410_gpio_setpin(S3C2410_GPF2, 0); - s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | S3C2410_MISCCR_USBSUSPND0 | diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index cde5ae9a4340..5df73cbf2b40 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -33,6 +33,7 @@ config MACH_ANUBIS select PM_SIMTEC if PM select HAVE_PATA_PLATFORM select S3C24XX_GPIO_EXTRA64 + select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics ANUBIS development system @@ -43,6 +44,7 @@ config MACH_OSIRIS select S3C24XX_DCLK select PM_SIMTEC if PM select S3C24XX_GPIO_EXTRA128 + select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. @@ -58,12 +60,14 @@ config ARCH_S3C2440 bool "SMDK2440" select CPU_S3C2440 select MACH_SMDK + select S3C_DEV_USB_HOST help Say Y here if you are using the SMDK2440. config MACH_NEXCODER_2440 bool "NexVision NEXCODER 2440 Light Board" select CPU_S3C2440 + select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board @@ -76,6 +80,7 @@ config SMDK2440_CPU2440 config MACH_AT2440EVB bool "Avantech AT2440EVB development board" select CPU_S3C2440 + select S3C_DEV_USB_HOST help Say Y here if you are using the AT2440EVB development board diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 69b6cf34df47..e08e081430f0 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -17,14 +17,16 @@ #include <linux/sysdev.h> #include <linux/serial_core.h> +#include <mach/map.h> #include <mach/dma.h> -#include <plat/dma.h> +#include <plat/dma-plat.h> #include <plat/cpu.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-ac97.h> +#include <plat/regs-dma.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 9c6abf9fb540..68f3870991bf 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> @@ -468,7 +469,7 @@ static void __init anubis_map_io(void) anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large); } else { /* ensure that the GPIO is setup */ - s3c2410_gpio_setpin(S3C2410_GPA0, 1); + s3c2410_gpio_setpin(S3C2410_GPA(0), 1); } } diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 315c42e31278..dfc7010935da 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = { }; static struct s3c24xx_mci_pdata at2440evb_mci_pdata = { - .gpio_detect = S3C2410_GPG10, + .gpio_detect = S3C2410_GPG(10), }; /* 7" LCD panel */ diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 7aeaa972d7f5..d43edede590e 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -18,6 +18,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/string.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = { static void __init nexcoder_sensorboard_init(void) { // Initialize SCCB bus - s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL - s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP); - s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA - s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP); + s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL + s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA + s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); // Power up the sensor board - s3c2410_gpio_setpin(S3C2410_GPF1, 1); - s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN - s3c2410_gpio_setpin(S3C2410_GPF2, 0); - s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN + s3c2410_gpio_setpin(S3C2410_GPF(1), 1); + s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN + s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN } static void __init nexcoder_map_io(void) diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index c8a46685ce38..cba064b49a64 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/device.h> #include <linux/sysdev.h> #include <linux/serial_core.h> @@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state) __raw_writeb(tmp, OSIRIS_VA_CTRL0); /* ensure that an nRESET is not generated on resume. */ - s3c2410_gpio_setpin(S3C2410_GPA21, 1); - s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT); + s3c2410_gpio_setpin(S3C2410_GPA(21), 1); + s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); return 0; } @@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd) __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0); - s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT); + s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); return 0; } @@ -384,7 +385,7 @@ static void __init osiris_map_io(void) osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large); } else { /* write-protect line to the NAND */ - s3c2410_gpio_setpin(S3C2410_GPA0, 1); + s3c2410_gpio_setpin(S3C2410_GPA(0), 1); } /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 8430e5829186..397f3b5c0b47 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -20,12 +20,13 @@ #include <mach/dma.h> -#include <plat/dma.h> +#include <plat/dma-plat.h> #include <plat/cpu.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-ac97.h> +#include <plat/regs-dma.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig index 6da82b5c09ba..f5af212066c3 100644 --- a/arch/arm/mach-s3c6400/Kconfig +++ b/arch/arm/mach-s3c6400/Kconfig @@ -5,4 +5,27 @@ # # Licensed under GPLv2 -# Currently nothing here, this will be added later +# Configuration options for the S3C6410 CPU + +config CPU_S3C6400 + bool + select CPU_S3C6400_INIT + select CPU_S3C6400_CLOCK + help + Enable S3C6400 CPU support + +config S3C6400_SETUP_SDHCI + bool + help + Internal configuration for default SDHCI + setup for S3C6400. + +# S36400 Macchine support + +config MACH_SMDK6400 + bool "SMDK6400" + select CPU_S3C6400 + select S3C_DEV_HSMMC + select S3C6400_SETUP_SDHCI + help + Machine support for the Samsung SMDK6400 diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile index 8f397db25b87..df1ce4aa03e5 100644 --- a/arch/arm/mach-s3c6400/Makefile +++ b/arch/arm/mach-s3c6400/Makefile @@ -12,4 +12,12 @@ obj- := # Core support for S3C6400 system -obj-n += blank.o +obj-$(CONFIG_CPU_S3C6400) += s3c6400.o + +# setup support + +obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o + +# Machine support + +obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 9771ac2cb07e..1067619f0ba0 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -11,6 +11,63 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -/* currently nothing here, placeholder */ +#define S3C_DMA_CHANNELS (16) + +/* see mach-s3c2410/dma.h for notes on dma channel numbers */ + +/* Note, for the S3C64XX architecture we keep the DMACH_ + * defines in the order they are allocated to [S]DMA0/[S]DMA1 + * so that is easy to do DHACH_ -> DMA controller conversion + */ +enum dma_ch { + /* DMA0/SDMA0 */ + DMACH_UART0 = 0, + DMACH_UART0_SRC2, + DMACH_UART1, + DMACH_UART1_SRC2, + DMACH_UART2, + DMACH_UART2_SRC2, + DMACH_UART3, + DMACH_UART3_SRC2, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_OUT, + DMACH_I2S0_IN, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_HSI_I2SV40_TX, + DMACH_HSI_I2SV40_RX, + + /* DMA1/SDMA1 */ + DMACH_PCM1_TX = 16, + DMACH_PCM1_RX, + DMACH_I2S1_OUT, + DMACH_I2S1_IN, + DMACH_SPI1_TX, + DMACH_SPI1_RX, + DMACH_AC97_PCMOUT, + DMACH_AC97_PCMIN, + DMACH_AC97_MICIN, + DMACH_PWM, + DMACH_IRDA, + DMACH_EXTERNAL, + DMACH_RES1, + DMACH_RES2, + DMACH_SECURITY_RX, /* SDMA1 only */ + DMACH_SECURITY_TX, /* SDMA1 only */ + DMACH_MAX /* the end */ +}; + +static __inline__ int s3c_dma_has_circular(void) +{ + /* we will be supporting ciruclar buffers as soon as we have DMA + * engine support. + */ + return 1; +} + +#define S3C2410_DMAF_CIRCULAR (1 << 0) + +#include <plat/dma.h> #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index 8199972ed5bd..5057d9948d35 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -39,6 +39,8 @@ #define S3C_VA_UART3 S3C_VA_UARTx(3) #define S3C64XX_PA_FB (0x77100000) +#define S3C64XX_PA_USB_HSOTG (0x7C000000) +#define S3C64XX_PA_WATCHDOG (0x7E004000) #define S3C64XX_PA_SYSCON (0x7E00F000) #define S3C64XX_PA_IIS0 (0x7F002000) #define S3C64XX_PA_IIS1 (0x7F003000) @@ -57,6 +59,8 @@ #define S3C64XX_PA_MODEM (0x74108000) #define S3C64XX_VA_MODEM S3C_ADDR(0x00600000) +#define S3C64XX_PA_USBHOST (0x74300000) + /* place VICs close together */ #define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) #define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) @@ -69,5 +73,7 @@ #define S3C_PA_IIC S3C64XX_PA_IIC0 #define S3C_PA_IIC1 S3C64XX_PA_IIC1 #define S3C_PA_FB S3C64XX_PA_FB +#define S3C_PA_USBHOST S3C64XX_PA_USBHOST +#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG #endif /* __ASM_ARCH_6400_MAP_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h new file mode 100644 index 000000000000..a6c7f4eb3a1b --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/regs-clock.h @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - clock register compatibility with s3c24xx + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/regs-clock.h> + diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h index 090cfd969bc7..2e58cb7a7147 100644 --- a/arch/arm/mach-s3c6400/include/mach/system.h +++ b/arch/arm/mach-s3c6400/include/mach/system.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ +#include <plat/watchdog-reset.h> + static void arch_idle(void) { /* nothing here yet */ @@ -18,7 +20,11 @@ static void arch_idle(void) static void arch_reset(char mode, const char *cmd) { - /* nothing here yet */ + if (mode != 's') + arch_wdt_reset(); + + /* if all else fails, or mode was for soft, jump to 0 */ + cpu_reset(0); } #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c new file mode 100644 index 000000000000..ab19285389a7 --- /dev/null +++ b/arch/arm/mach-s3c6400/mach-smdk6400.c @@ -0,0 +1,96 @@ +/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/io.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/regs-serial.h> + +#include <plat/s3c6400.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, +}; + +static struct map_desc smdk6400_iodesc[] = {}; + +static void __init smdk6400_map_io(void) +{ + s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs)); +} + +static struct platform_device *smdk6400_devices[] __initdata = { + &s3c_device_hsmmc1, + &s3c_device_i2c0, +}; + +static struct i2c_board_info i2c_devs[] __initdata = { + { I2C_BOARD_INFO("wm8753", 0x1A), }, + { I2C_BOARD_INFO("24c08", 0x50), }, +}; + +static void __init smdk6400_machine_init(void) +{ + i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs)); + platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices)); +} + +MACHINE_START(SMDK6400, "SMDK6400") + /* Maintainer: Ben Dooks <ben@fluff.org> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C64XX_PA_SDRAM + 0x100, + + .init_irq = s3c6400_init_irq, + .map_io = smdk6400_map_io, + .init_machine = smdk6400_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c new file mode 100644 index 000000000000..1ece887d90bb --- /dev/null +++ b/arch/arm/mach-s3c6400/s3c6400.c @@ -0,0 +1,89 @@ +/* linux/arch/arm/mach-s3c6410/cpu.c + * + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <plat/cpu-freq.h> +#include <plat/regs-serial.h> +#include <plat/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/sdhci.h> +#include <plat/iic-core.h> +#include <plat/s3c6400.h> + +void __init s3c6400_map_io(void) +{ + /* setup SDHCI */ + + s3c6400_default_sdhci0(); + s3c6400_default_sdhci1(); + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); +} + +void __init s3c6400_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initialising clocks\n", __func__); + s3c24xx_register_baseclocks(xtal); + s3c64xx_register_clocks(); + s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK); + s3c6400_setup_clocks(); +} + +void __init s3c6400_init_irq(void) +{ + /* VIC0 does not have IRQS 5..7, + * VIC1 is fully populated. */ + s3c64xx_init_irq(~0 & ~(0xf << 5), ~0); +} + +struct sysdev_class s3c6400_sysclass = { + .name = "s3c6400-core", +}; + +static struct sys_device s3c6400_sysdev = { + .cls = &s3c6400_sysclass, +}; + +static int __init s3c6400_core_init(void) +{ + return sysdev_class_register(&s3c6400_sysclass); +} + +core_initcall(s3c6400_core_init); + +int __init s3c6400_init(void) +{ + printk("S3C6400: Initialising architecture\n"); + + return sysdev_register(&s3c6400_sysdev); +} diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c new file mode 100644 index 000000000000..b93dafbee1f4 --- /dev/null +++ b/arch/arm/mach-s3c6400/setup-sdhci.c @@ -0,0 +1,63 @@ +/* linux/arch/arm/mach-s3c6410/setup-sdhci.c + * + * Copyright 2008 Simtec Electronics + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include <plat/regs-sdhci.h> +#include <plat/sdhci.h> + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *s3c6400_hsmmc_clksrcs[4] = { + [0] = "hsmmc", + [1] = "hsmmc", + [2] = "mmc_bus", + /* [3] = "48m", - note not succesfully used yet */ +}; + +void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} + diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index 1d5010070027..e63aac7f4e5a 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -16,9 +16,18 @@ config CPU_S3C6410 config S3C6410_SETUP_SDHCI bool + select S3C64XX_SETUP_SDHCI_GPIO help Internal helper functions for S3C6410 based SDHCI systems +config MACH_ANW6410 + bool "A&W6410" + select CPU_S3C6410 + select S3C_DEV_FB + select S3C64XX_SETUP_FB_24BPP + help + Machine support for the A&W6410 + config MACH_SMDK6410 bool "SMDK6410" select CPU_S3C6410 @@ -26,6 +35,8 @@ config MACH_SMDK6410 select S3C_DEV_HSMMC1 select S3C_DEV_I2C1 select S3C_DEV_FB + select S3C_DEV_USB_HOST + select S3C_DEV_USB_HSOTG select S3C6410_SETUP_SDHCI select S3C64XX_SETUP_I2C1 select S3C64XX_SETUP_FB_24BPP @@ -60,3 +71,29 @@ config SMDK6410_SD_CH1 channels 0 and 1 are the same. endchoice + +config SMDK6410_WM1190_EV1 + bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" + depends on MACH_SMDK6410 + select REGULATOR + select REGULATOR_WM8350 + select MFD_WM8350_I2C + select MFD_WM8350_CONFIG_MODE_0 + select MFD_WM8350_CONFIG_MODE_3 + select MFD_WM8352_CONFIG_MODE_0 + help + The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC + and audio daughtercard for the Samsung SMDK6410 reference + platform. Enabling this option will build support for this + module into the kernel. The presence of the module will be + detected at runtime so the the resulting kernel can be used + with or without the 1190-EV1 fitted. + +config MACH_NCP + bool "NCP" + select CPU_S3C6410 + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC1 + select S3C64XX_SETUP_I2C1 + help + Machine support for the Samsung NCP diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile index 2cd4f189036b..6f9deac88612 100644 --- a/arch/arm/mach-s3c6410/Makefile +++ b/arch/arm/mach-s3c6410/Makefile @@ -20,4 +20,8 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o # machine support +obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o +obj-$(CONFIG_MACH_NCP) += mach-ncp.o + + diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c index 6a73ca6b7a3a..ade904de8895 100644 --- a/arch/arm/mach-s3c6410/cpu.c +++ b/arch/arm/mach-s3c6410/cpu.c @@ -31,6 +31,7 @@ #include <plat/cpu-freq.h> #include <plat/regs-serial.h> +#include <plat/regs-clock.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -68,7 +69,7 @@ void __init s3c6410_init_clocks(int xtal) printk(KERN_DEBUG "%s: initialising clocks\n", __func__); s3c24xx_register_baseclocks(xtal); s3c64xx_register_clocks(); - s3c6400_register_clocks(); + s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK); s3c6400_setup_clocks(); } diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c new file mode 100644 index 000000000000..661cca63de25 --- /dev/null +++ b/arch/arm/mach-s3c6410/mach-anw6410.c @@ -0,0 +1,245 @@ +/* linux/arch/arm/mach-s3c6410/mach-anw6410.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * Copyright 2009 Kwangwoo Lee + * Kwangwoo Lee <kwangwoo.lee@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/dm9000.h> + +#include <video/platform_lcd.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/regs-fb.h> +#include <mach/map.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/iic.h> +#include <plat/fb.h> + +#include <plat/s3c6410.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/regs-gpio.h> +#include <plat/regs-modem.h> + +/* DM9000 */ +#define ANW6410_PA_DM9000 (0x18000000) + +/* A hardware buffer to control external devices is mapped at 0x30000000. + * It can not be read. So current status must be kept in anw6410_extdev_status. + */ +#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000) +#define ANW6410_PA_EXTDEV (0x30000000) + +#define ANW6410_EN_DM9000 (1<<11) +#define ANW6410_EN_LCD (1<<14) + +static __u32 anw6410_extdev_status; + +static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, +}; + +/* framebuffer and LCD setup. */ +static void __init anw6410_lcd_mode_set(void) +{ + u32 tmp; + + /* set the LCD type */ + tmp = __raw_readl(S3C64XX_SPCON); + tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; + tmp |= S3C64XX_SPCON_LCD_SEL_RGB; + __raw_writel(tmp, S3C64XX_SPCON); + + /* remove the LCD bypass */ + tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); + tmp &= ~MIFPCON_LCD_BYPASS; + __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); +} + +/* GPF1 = LCD panel power + * GPF4 = LCD backlight control + */ +static void anw6410_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) { + anw6410_extdev_status |= (ANW6410_EN_LCD << 16); + __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV); + + gpio_direction_output(S3C64XX_GPF(1), 1); + gpio_direction_output(S3C64XX_GPF(4), 1); + } else { + anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16); + __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV); + + gpio_direction_output(S3C64XX_GPF(1), 0); + gpio_direction_output(S3C64XX_GPF(4), 0); + } +} + +static struct plat_lcd_data anw6410_lcd_power_data = { + .set_power = anw6410_lcd_power_set, +}; + +static struct platform_device anw6410_lcd_powerdev = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &anw6410_lcd_power_data, +}; + +static struct s3c_fb_pd_win anw6410_fb_win0 = { + /* this is to ensure we use win0 */ + .win_mode = { + .pixclock = 41094, + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ +static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = { + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .win[0] = &anw6410_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, +}; + +/* DM9000AEP 10/100 ethernet controller */ +static void __init anw6410_dm9000_enable(void) +{ + anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16); + __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV); +} + +static struct resource anw6410_dm9000_resource[] = { + [0] = { + .start = ANW6410_PA_DM9000, + .end = ANW6410_PA_DM9000 + 3, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ANW6410_PA_DM9000 + 4, + .end = ANW6410_PA_DM9000 + 4 + 500, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_EINT(15), + .end = IRQ_EINT(15), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + }, +}; + +static struct dm9000_plat_data anw6410_dm9000_pdata = { + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), + /* dev_addr can be set to provide hwaddr. */ +}; + +static struct platform_device anw6410_device_eth = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(anw6410_dm9000_resource), + .resource = anw6410_dm9000_resource, + .dev = { + .platform_data = &anw6410_dm9000_pdata, + }, +}; + +static struct map_desc anw6410_iodesc[] __initdata = { + { + .virtual = (unsigned long)ANW6410_VA_EXTDEV, + .pfn = __phys_to_pfn(ANW6410_PA_EXTDEV), + .length = SZ_64K, + .type = MT_DEVICE, + }, +}; + +static struct platform_device *anw6410_devices[] __initdata = { + &s3c_device_fb, + &anw6410_lcd_powerdev, + &anw6410_device_eth, +}; + +static void __init anw6410_map_io(void) +{ + s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs)); + + anw6410_lcd_mode_set(); +} + +static void __init anw6410_machine_init(void) +{ + s3c_fb_set_platdata(&anw6410_lcd_pdata); + + gpio_request(S3C64XX_GPF(1), "panel power"); + gpio_request(S3C64XX_GPF(4), "LCD backlight"); + + anw6410_dm9000_enable(); + + platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices)); +} + +MACHINE_START(ANW6410, "A&W6410") + /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C64XX_PA_SDRAM + 0x100, + + .init_irq = s3c6410_init_irq, + .map_io = anw6410_map_io, + .init_machine = anw6410_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c new file mode 100644 index 000000000000..6030636f8548 --- /dev/null +++ b/arch/arm/mach-s3c6410/mach-ncp.c @@ -0,0 +1,107 @@ +/* + * linux/arch/arm/mach-s3c6410/mach-ncp.c + * + * Copyright (C) 2008-2009 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/delay.h> + +#include <video/platform_lcd.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/regs-fb.h> +#include <mach/map.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/iic.h> +#include <plat/fb.h> + +#include <plat/s3c6410.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = { + /* REVISIT: NCP uses only serial 1, 2 */ + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +static struct platform_device *ncp_devices[] __initdata = { + &s3c_device_hsmmc1, + &s3c_device_i2c0, +}; + +struct map_desc ncp_iodesc[] = {}; + +static void __init ncp_map_io(void) +{ + s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs)); +} + +static void __init ncp_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + + platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices)); +} + +MACHINE_START(NCP, "NCP") + /* Maintainer: Samsung Electronics */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C64XX_PA_SDRAM + 0x100, + .init_irq = s3c6410_init_irq, + .map_io = ncp_map_io, + .init_machine = ncp_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 7f473e47e4f1..bc9a7dea567f 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -24,6 +24,12 @@ #include <linux/fb.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <linux/smsc911x.h> + +#ifdef CONFIG_SMDK6410_WM1190_EV1 +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/pmic.h> +#endif #include <video/platform_lcd.h> @@ -39,8 +45,12 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/regs-modem.h> +#include <plat/regs-gpio.h> +#include <plat/regs-sys.h> #include <plat/iic.h> #include <plat/fb.h> +#include <plat/gpio-cfg.h> #include <plat/s3c6410.h> #include <plat/clock.h> @@ -129,6 +139,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }; +static struct resource smdk6410_smsc911x_resources[] = { + [0] = { + .start = 0x18000000, + .end = 0x18000000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S3C_EINT(10), + .end = S3C_EINT(10), + .flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW, + }, +}; + +static struct smsc911x_platform_config smdk6410_smsc911x_pdata = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + + +static struct platform_device smdk6410_smsc911x = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources), + .resource = &smdk6410_smsc911x_resources[0], + .dev = { + .platform_data = &smdk6410_smsc911x_pdata, + }, +}; + static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -141,12 +182,155 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_fb, + &s3c_device_usb, + &s3c_device_usb_hsotg, &smdk6410_lcd_powerdev, + + &smdk6410_smsc911x, +}; + +#ifdef CONFIG_SMDK6410_WM1190_EV1 +/* S3C64xx internal logic & PLL */ +static struct regulator_init_data wm8350_dcdc1_data = { + .constraints = { + .name = "PVDD_INT/PVDD_PLL", + .min_uV = 1200000, + .max_uV = 1200000, + .always_on = 1, + .apply_uV = 1, + }, +}; + +/* Memory */ +static struct regulator_init_data wm8350_dcdc3_data = { + .constraints = { + .name = "PVDD_MEM", + .min_uV = 1800000, + .max_uV = 1800000, + .always_on = 1, + .state_mem = { + .uV = 1800000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .initial_state = PM_SUSPEND_MEM, + }, +}; + +/* USB, EXT, PCM, ADC/DAC, USB, MMC */ +static struct regulator_init_data wm8350_dcdc4_data = { + .constraints = { + .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV", + .min_uV = 3000000, + .max_uV = 3000000, + .always_on = 1, + }, +}; + +/* ARM core */ +static struct regulator_consumer_supply dcdc6_consumers[] = { + { + .supply = "vddarm", + } +}; + +static struct regulator_init_data wm8350_dcdc6_data = { + .constraints = { + .name = "PVDD_ARM", + .min_uV = 1000000, + .max_uV = 1300000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers), + .consumer_supplies = dcdc6_consumers, }; +/* Alive */ +static struct regulator_init_data wm8350_ldo1_data = { + .constraints = { + .name = "PVDD_ALIVE", + .min_uV = 1200000, + .max_uV = 1200000, + .always_on = 1, + .apply_uV = 1, + }, +}; + +/* OTG */ +static struct regulator_init_data wm8350_ldo2_data = { + .constraints = { + .name = "PVDD_OTG", + .min_uV = 3300000, + .max_uV = 3300000, + .always_on = 1, + }, +}; + +/* LCD */ +static struct regulator_init_data wm8350_ldo3_data = { + .constraints = { + .name = "PVDD_LCD", + .min_uV = 3000000, + .max_uV = 3000000, + .always_on = 1, + }, +}; + +/* OTGi/1190-EV1 HPVDD & AVDD */ +static struct regulator_init_data wm8350_ldo4_data = { + .constraints = { + .name = "PVDD_OTGI/HPVDD/AVDD", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + }, +}; + +static struct { + int regulator; + struct regulator_init_data *initdata; +} wm1190_regulators[] = { + { WM8350_DCDC_1, &wm8350_dcdc1_data }, + { WM8350_DCDC_3, &wm8350_dcdc3_data }, + { WM8350_DCDC_4, &wm8350_dcdc4_data }, + { WM8350_DCDC_6, &wm8350_dcdc6_data }, + { WM8350_LDO_1, &wm8350_ldo1_data }, + { WM8350_LDO_2, &wm8350_ldo2_data }, + { WM8350_LDO_3, &wm8350_ldo3_data }, + { WM8350_LDO_4, &wm8350_ldo4_data }, +}; + +static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) +{ + int i; + + /* Instantiate the regulators */ + for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++) + wm8350_register_regulator(wm8350, + wm1190_regulators[i].regulator, + wm1190_regulators[i].initdata); + + return 0; +} + +static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = { + .init = smdk6410_wm8350_init, + .irq_high = 1, +}; +#endif + static struct i2c_board_info i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, { I2C_BOARD_INFO("wm8580", 0x1b), }, + +#ifdef CONFIG_SMDK6410_WM1190_EV1 + { I2C_BOARD_INFO("wm8350", 0x1a), + .platform_data = &smdk6410_wm8350_pdata, + .irq = S3C_EINT(12), + }, +#endif }; static struct i2c_board_info i2c_devs1[] __initdata = { @@ -155,9 +339,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = { static void __init smdk6410_map_io(void) { + u32 tmp; + s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); + + /* set the LCD type */ + + tmp = __raw_readl(S3C64XX_SPCON); + tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; + tmp |= S3C64XX_SPCON_LCD_SEL_RGB; + __raw_writel(tmp, S3C64XX_SPCON); + + /* remove the lcd bypass */ + tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); + tmp &= ~MIFPCON_LCD_BYPASS; + __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); } static void __init smdk6410_machine_init(void) diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c index 0b5788bd5985..20666f3bd478 100644 --- a/arch/arm/mach-s3c6410/setup-sdhci.c +++ b/arch/arm/mach-s3c6410/setup-sdhci.c @@ -21,8 +21,6 @@ #include <linux/mmc/card.h> #include <linux/mmc/host.h> -#include <mach/gpio.h> -#include <plat/gpio-cfg.h> #include <plat/regs-sdhci.h> #include <plat/sdhci.h> @@ -35,22 +33,6 @@ char *s3c6410_hsmmc_clksrcs[4] = { /* [3] = "48m", - note not succesfully used yet */ }; -void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - unsigned int gpio; - unsigned int end; - - end = S3C64XX_GPG(2 + width); - - /* Set all the necessary GPG pins to special-function 0 */ - for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2)); -} void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, void __iomem *r, @@ -84,19 +66,3 @@ void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, writel(ctrl3, r + S3C_SDHCI_CONTROL3); } -void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - unsigned int gpio; - unsigned int end; - - end = S3C64XX_GPH(2 + width); - - /* Set all the necessary GPG pins to special-function 0 */ - for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c deleted file mode 100644 index 444f266ecc06..000000000000 --- a/arch/arm/mach-sa1100/collie_pm.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Based on spitz_pm.c and sharp code. - * - * Copyright (C) 2001 SHARP - * Copyright 2005 Pavel Machek <pavel@suse.cz> - * - * Distribute under GPLv2. - * - * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished, - * and sometimes charges them when it should not. If it makes angry lithium to come your way... - * ...well, you have been warned. - * - * Actually, this should be quite safe, it seems sharp leaves charger enabled by default, - * and my collie did not explode (yet). - */ - -#include <linux/module.h> -#include <linux/stat.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <asm/hardware/scoop.h> -#include <mach/dma.h> -#include <mach/collie.h> -#include <asm/mach/sharpsl_param.h> -#include <asm/hardware/sharpsl_pm.h> - -#include "../drivers/mfd/ucb1x00.h" - -static struct ucb1x00 *ucb; -static int ad_revise; - -#define ADCtoPower(x) ((330 * x * 2) / 1024) - -static void collie_charger_init(void) -{ - int err; - - if (sharpsl_param.adadj != -1) - ad_revise = sharpsl_param.adadj; - - /* Register interrupt handler. */ - if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED, - "ACIN", sharpsl_ac_isr))) { - printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN); - return; - } - if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED, - "CO", sharpsl_chrg_full_isr))) { - free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr); - printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO); - return; - } - - gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on"); - gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1); - - ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON | - COLLIE_TC35143_GPIO_BBAT_ON); - return; -} - -static void collie_measure_temp(int on) -{ - if (on) - ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); - else - ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); -} - -static void collie_charge(int on) -{ - /* Zaurus seems to contain LTC1731; it should know when to - * stop charging itself, so setting charge on should be - * relatively harmless (as long as it is not done too often). - */ - gpio_set_value(COLLIE_GPIO_CHARGE_ON, on); -} - -static void collie_discharge(int on) -{ -} - -static void collie_discharge1(int on) -{ -} - -static void collie_presuspend(void) -{ -} - -static void collie_postsuspend(void) -{ -} - -static int collie_should_wakeup(unsigned int resume_on_alarm) -{ - return 0; -} - -static unsigned long collie_charger_wakeup(void) -{ - return 0; -} - -int collie_read_backup_battery(void) -{ - int voltage; - - ucb1x00_adc_enable(ucb); - - ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0); - voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); - - ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); - ucb1x00_adc_disable(ucb); - - printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage); - - return ADCtoPower(voltage); -} - -int collie_read_main_battery(void) -{ - int voltage, voltage_rev, voltage_volts; - - ucb1x00_adc_enable(ucb); - ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); - ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0); - - mdelay(1); - voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); - - ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON); - ucb1x00_adc_disable(ucb); - - voltage_rev = voltage + ((ad_revise * voltage) / 652); - voltage_volts = ADCtoPower(voltage_rev); - - printk("Main battery = %d(%d)\n", voltage_volts, voltage); - - if (voltage != -1) - return voltage_volts; - else - return voltage; -} - -int collie_read_temp(void) -{ - int voltage; - - /* According to Sharp, temp must be > 973, main battery must be < 465, - FIXME: sharpsl_pm.c has both conditions negated? FIXME: values - are way out of range? */ - - ucb1x00_adc_enable(ucb); - ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); - /* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */ - voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC); - ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); - ucb1x00_adc_disable(ucb); - - printk("Battery temp = %d\n", voltage); - return voltage; -} - -static unsigned long read_devdata(int which) -{ - switch (which) { - case SHARPSL_BATT_VOLT: - return collie_read_main_battery(); - case SHARPSL_BATT_TEMP: - return collie_read_temp(); - case SHARPSL_ACIN_VOLT: - return 500; - case SHARPSL_STATUS_ACIN: { - int ret = GPLR & COLLIE_GPIO_AC_IN; - printk("AC status = %d\n", ret); - return ret; - } - case SHARPSL_STATUS_FATAL: { - int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW; - printk("Fatal bat = %d\n", ret); - return ret; - } - default: - return ~0; - } -} - -struct battery_thresh collie_battery_levels_acin[] = { - { 420, 100}, - { 417, 95}, - { 415, 90}, - { 413, 80}, - { 411, 75}, - { 408, 70}, - { 406, 60}, - { 403, 50}, - { 398, 40}, - { 391, 25}, - { 10, 5}, - { 0, 0}, -}; - -struct battery_thresh collie_battery_levels[] = { - { 394, 100}, - { 390, 95}, - { 380, 90}, - { 370, 80}, - { 368, 75}, /* From sharp code: battery high with frontlight */ - { 366, 70}, /* 60..90 -- fake values invented by me for testing */ - { 364, 60}, - { 362, 50}, - { 360, 40}, - { 358, 25}, /* From sharp code: battery low with frontlight */ - { 356, 5}, /* From sharp code: battery verylow with frontlight */ - { 0, 0}, -}; - -struct sharpsl_charger_machinfo collie_pm_machinfo = { - .init = collie_charger_init, - .read_devdata = read_devdata, - .discharge = collie_discharge, - .discharge1 = collie_discharge1, - .charge = collie_charge, - .measure_temp = collie_measure_temp, - .presuspend = collie_presuspend, - .postsuspend = collie_postsuspend, - .charger_wakeup = collie_charger_wakeup, - .should_wakeup = collie_should_wakeup, - .bat_levels = 12, - .bat_levels_noac = collie_battery_levels, - .bat_levels_acin = collie_battery_levels_acin, - .status_high_acin = 368, - .status_low_acin = 358, - .status_high_noac = 368, - .status_low_noac = 358, - .charge_on_volt = 350, /* spitz uses 2.90V, but lets play it safe. */ - .charge_on_temp = 550, - .charge_acin_high = 550, /* collie does not seem to have sensor for this, anyway */ - .charge_acin_low = 450, /* ignored, too */ - .fatal_acin_volt = 356, - .fatal_noacin_volt = 356, - - .batfull_irq = 1, /* We do not want periodical charge restarts */ -}; - -static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev) -{ - sharpsl_pm.machinfo = &collie_pm_machinfo; - ucb = pdev->ucb; - return 0; -} - -static struct ucb1x00_driver collie_pm_ucb_driver = { - .add = collie_pm_ucb_add, -}; - -static struct platform_device *collie_pm_device; - -static int __init collie_pm_init(void) -{ - int ret; - - collie_pm_device = platform_device_alloc("sharpsl-pm", -1); - if (!collie_pm_device) - return -ENOMEM; - - collie_pm_device->dev.platform_data = &collie_pm_machinfo; - ret = platform_device_add(collie_pm_device); - - if (ret) - platform_device_put(collie_pm_device); - - if (!ret) - ret = ucb1x00_register_driver(&collie_pm_ucb_driver); - - return ret; -} - -static void __exit collie_pm_exit(void) -{ - ucb1x00_unregister_driver(&collie_pm_ucb_driver); - platform_device_unregister(collie_pm_device); -} - -module_init(collie_pm_init); -module_exit(collie_pm_exit); diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile new file mode 100644 index 000000000000..d156f76b379f --- /dev/null +++ b/arch/arm/mach-stmp378x/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o +obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot new file mode 100644 index 000000000000..1568ad404d59 --- /dev/null +++ b/arch/arm/mach-stmp378x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x40008000 +params_phys-y := 0x40000100 +initrd_phys-y := 0x40800000 diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S new file mode 100644 index 000000000000..731a92286da2 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/entry-macro.S @@ -0,0 +1,35 @@ +/* + * Low-level IRQ helper macros for Freescale STMP378X + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \base, #0xf0000000 @ vm address of IRQ controller + ldr \irqnr, [\base, #0x70] @ HW_ICOLL_STAT + cmp \irqnr, #0x7f + moveqs \irqnr, #0 @ Zero flag set for no IRQ + + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h new file mode 100644 index 000000000000..cc59673becdd --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/irqs.h @@ -0,0 +1,95 @@ +/* + * Freescale STMP378X interrupts + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#define IRQ_DEBUG_UART 0 +#define IRQ_COMMS_RX 1 +#define IRQ_COMMS_TX 1 +#define IRQ_SSP2_ERROR 2 +#define IRQ_VDD5V 3 +#define IRQ_HEADPHONE_SHORT 4 +#define IRQ_DAC_DMA 5 +#define IRQ_DAC_ERROR 6 +#define IRQ_ADC_DMA 7 +#define IRQ_ADC_ERROR 8 +#define IRQ_SPDIF_DMA 9 +#define IRQ_SAIF2_DMA 9 +#define IRQ_SPDIF_ERROR 10 +#define IRQ_SAIF1_IRQ 10 +#define IRQ_SAIF2_IRQ 10 +#define IRQ_USB_CTRL 11 +#define IRQ_USB_WAKEUP 12 +#define IRQ_GPMI_DMA 13 +#define IRQ_SSP1_DMA 14 +#define IRQ_SSP_ERROR 15 +#define IRQ_GPIO0 16 +#define IRQ_GPIO1 17 +#define IRQ_GPIO2 18 +#define IRQ_SAIF1_DMA 19 +#define IRQ_SSP2_DMA 20 +#define IRQ_ECC8_IRQ 21 +#define IRQ_RTC_ALARM 22 +#define IRQ_UARTAPP_TX_DMA 23 +#define IRQ_UARTAPP_INTERNAL 24 +#define IRQ_UARTAPP_RX_DMA 25 +#define IRQ_I2C_DMA 26 +#define IRQ_I2C_ERROR 27 +#define IRQ_TIMER0 28 +#define IRQ_TIMER1 29 +#define IRQ_TIMER2 30 +#define IRQ_TIMER3 31 +#define IRQ_BATT_BRNOUT 32 +#define IRQ_VDDD_BRNOUT 33 +#define IRQ_VDDIO_BRNOUT 34 +#define IRQ_VDD18_BRNOUT 35 +#define IRQ_TOUCH_DETECT 36 +#define IRQ_LRADC_CH0 37 +#define IRQ_LRADC_CH1 38 +#define IRQ_LRADC_CH2 39 +#define IRQ_LRADC_CH3 40 +#define IRQ_LRADC_CH4 41 +#define IRQ_LRADC_CH5 42 +#define IRQ_LRADC_CH6 43 +#define IRQ_LRADC_CH7 44 +#define IRQ_LCDIF_DMA 45 +#define IRQ_LCDIF_ERROR 46 +#define IRQ_DIGCTL_DEBUG_TRAP 47 +#define IRQ_RTC_1MSEC 48 +#define IRQ_DRI_DMA 49 +#define IRQ_DRI_ATTENTION 50 +#define IRQ_GPMI_ATTENTION 51 +#define IRQ_IR 52 +#define IRQ_DCP_VMI 53 +#define IRQ_DCP 54 +#define IRQ_BCH 56 +#define IRQ_PXP 57 +#define IRQ_UARTAPP2_TX_DMA 58 +#define IRQ_UARTAPP2_INTERNAL 59 +#define IRQ_UARTAPP2_RX_DMA 60 +#define IRQ_VDAC_DETECT 61 +#define IRQ_VDD5V_DROOP 64 +#define IRQ_DCDC4P2_BO 65 + + +#define NR_REAL_IRQS 128 +#define NR_IRQS (NR_REAL_IRQS + 32 * 3) + +/* All interrupts are FIQ capable */ +#define FIQ_START IRQ_DEBUG_UART + +/* Hard disk IRQ is a GPMI attention IRQ */ +#define IRQ_HARDDISK IRQ_GPMI_ATTENTION diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h new file mode 100644 index 000000000000..93f952d35969 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/pins.h @@ -0,0 +1,151 @@ +/* + * Freescale STMP378X SoC pin multiplexing + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_PINS_H +#define __ASM_ARCH_PINS_H + +/* + * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware + * interface this pin belongs to. + */ + +/* Bank 0 */ +#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0) +#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1) +#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2) +#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3) +#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4) +#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5) +#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6) +#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7) +#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8) +#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9) +#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10) +#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11) +#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12) +#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13) +#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14) +#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15) +#define PINID_GPMI_CLE STMP3XXX_PINID(0, 16) +#define PINID_GPMI_ALE STMP3XXX_PINID(0, 17) +#define PINID_GMPI_CE2N STMP3XXX_PINID(0, 18) +#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19) +#define PINID_GPMI_RDY1 STMP3XXX_PINID(0, 20) +#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 21) +#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 22) +#define PINID_GPMI_WPN STMP3XXX_PINID(0, 23) +#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24) +#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25) +#define PINID_AUART1_CTS STMP3XXX_PINID(0, 26) +#define PINID_AUART1_RTS STMP3XXX_PINID(0, 27) +#define PINID_AUART1_RX STMP3XXX_PINID(0, 28) +#define PINID_AUART1_TX STMP3XXX_PINID(0, 29) +#define PINID_I2C_SCL STMP3XXX_PINID(0, 30) +#define PINID_I2C_SDA STMP3XXX_PINID(0, 31) + +/* Bank 1 */ +#define PINID_LCD_D00 STMP3XXX_PINID(1, 0) +#define PINID_LCD_D01 STMP3XXX_PINID(1, 1) +#define PINID_LCD_D02 STMP3XXX_PINID(1, 2) +#define PINID_LCD_D03 STMP3XXX_PINID(1, 3) +#define PINID_LCD_D04 STMP3XXX_PINID(1, 4) +#define PINID_LCD_D05 STMP3XXX_PINID(1, 5) +#define PINID_LCD_D06 STMP3XXX_PINID(1, 6) +#define PINID_LCD_D07 STMP3XXX_PINID(1, 7) +#define PINID_LCD_D08 STMP3XXX_PINID(1, 8) +#define PINID_LCD_D09 STMP3XXX_PINID(1, 9) +#define PINID_LCD_D10 STMP3XXX_PINID(1, 10) +#define PINID_LCD_D11 STMP3XXX_PINID(1, 11) +#define PINID_LCD_D12 STMP3XXX_PINID(1, 12) +#define PINID_LCD_D13 STMP3XXX_PINID(1, 13) +#define PINID_LCD_D14 STMP3XXX_PINID(1, 14) +#define PINID_LCD_D15 STMP3XXX_PINID(1, 15) +#define PINID_LCD_D16 STMP3XXX_PINID(1, 16) +#define PINID_LCD_D17 STMP3XXX_PINID(1, 17) +#define PINID_LCD_RESET STMP3XXX_PINID(1, 18) +#define PINID_LCD_RS STMP3XXX_PINID(1, 19) +#define PINID_LCD_WR STMP3XXX_PINID(1, 20) +#define PINID_LCD_CS STMP3XXX_PINID(1, 21) +#define PINID_LCD_DOTCK STMP3XXX_PINID(1, 22) +#define PINID_LCD_ENABLE STMP3XXX_PINID(1, 23) +#define PINID_LCD_HSYNC STMP3XXX_PINID(1, 24) +#define PINID_LCD_VSYNC STMP3XXX_PINID(1, 25) +#define PINID_PWM0 STMP3XXX_PINID(1, 26) +#define PINID_PWM1 STMP3XXX_PINID(1, 27) +#define PINID_PWM2 STMP3XXX_PINID(1, 28) +#define PINID_PWM3 STMP3XXX_PINID(1, 29) +#define PINID_PWM4 STMP3XXX_PINID(1, 30) + +/* Bank 2 */ +#define PINID_SSP1_CMD STMP3XXX_PINID(2, 0) +#define PINID_SSP1_DETECT STMP3XXX_PINID(2, 1) +#define PINID_SSP1_DATA0 STMP3XXX_PINID(2, 2) +#define PINID_SSP1_DATA1 STMP3XXX_PINID(2, 3) +#define PINID_SSP1_DATA2 STMP3XXX_PINID(2, 4) +#define PINID_SSP1_DATA3 STMP3XXX_PINID(2, 5) +#define PINID_SSP1_SCK STMP3XXX_PINID(2, 6) +#define PINID_ROTARYA STMP3XXX_PINID(2, 7) +#define PINID_ROTARYB STMP3XXX_PINID(2, 8) +#define PINID_EMI_A00 STMP3XXX_PINID(2, 9) +#define PINID_EMI_A01 STMP3XXX_PINID(2, 10) +#define PINID_EMI_A02 STMP3XXX_PINID(2, 11) +#define PINID_EMI_A03 STMP3XXX_PINID(2, 12) +#define PINID_EMI_A04 STMP3XXX_PINID(2, 13) +#define PINID_EMI_A05 STMP3XXX_PINID(2, 14) +#define PINID_EMI_A06 STMP3XXX_PINID(2, 15) +#define PINID_EMI_A07 STMP3XXX_PINID(2, 16) +#define PINID_EMI_A08 STMP3XXX_PINID(2, 17) +#define PINID_EMI_A09 STMP3XXX_PINID(2, 18) +#define PINID_EMI_A10 STMP3XXX_PINID(2, 19) +#define PINID_EMI_A11 STMP3XXX_PINID(2, 20) +#define PINID_EMI_A12 STMP3XXX_PINID(2, 21) +#define PINID_EMI_BA0 STMP3XXX_PINID(2, 22) +#define PINID_EMI_BA1 STMP3XXX_PINID(2, 23) +#define PINID_EMI_CASN STMP3XXX_PINID(2, 24) +#define PINID_EMI_CE0N STMP3XXX_PINID(2, 25) +#define PINID_EMI_CE1N STMP3XXX_PINID(2, 26) +#define PINID_GPMI_CE1N STMP3XXX_PINID(2, 27) +#define PINID_GPMI_CE0N STMP3XXX_PINID(2, 28) +#define PINID_EMI_CKE STMP3XXX_PINID(2, 29) +#define PINID_EMI_RASN STMP3XXX_PINID(2, 30) +#define PINID_EMI_WEN STMP3XXX_PINID(2, 31) + +/* Bank 3 */ +#define PINID_EMI_D00 STMP3XXX_PINID(3, 0) +#define PINID_EMI_D01 STMP3XXX_PINID(3, 1) +#define PINID_EMI_D02 STMP3XXX_PINID(3, 2) +#define PINID_EMI_D03 STMP3XXX_PINID(3, 3) +#define PINID_EMI_D04 STMP3XXX_PINID(3, 4) +#define PINID_EMI_D05 STMP3XXX_PINID(3, 5) +#define PINID_EMI_D06 STMP3XXX_PINID(3, 6) +#define PINID_EMI_D07 STMP3XXX_PINID(3, 7) +#define PINID_EMI_D08 STMP3XXX_PINID(3, 8) +#define PINID_EMI_D09 STMP3XXX_PINID(3, 9) +#define PINID_EMI_D10 STMP3XXX_PINID(3, 10) +#define PINID_EMI_D11 STMP3XXX_PINID(3, 11) +#define PINID_EMI_D12 STMP3XXX_PINID(3, 12) +#define PINID_EMI_D13 STMP3XXX_PINID(3, 13) +#define PINID_EMI_D14 STMP3XXX_PINID(3, 14) +#define PINID_EMI_D15 STMP3XXX_PINID(3, 15) +#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 16) +#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 17) +#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 18) +#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 19) +#define PINID_EMI_CLK STMP3XXX_PINID(3, 20) +#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21) + +#endif /* __ASM_ARCH_PINS_H */ diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h new file mode 100644 index 000000000000..dbcf85b6ac2a --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h @@ -0,0 +1,101 @@ +/* + * stmp378x: APBH register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_APBH +#define _MACH_REGS_APBH + +#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000) +#define REGS_APBH_PHYS 0x80004000 +#define REGS_APBH_SIZE 0x2000 + +#define HW_APBH_CTRL0 0x0 +#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BP_APBH_CTRL0_RESET_CHANNEL 16 +#define BM_APBH_CTRL0_CLKGATE 0x40000000 +#define BM_APBH_CTRL0_SFTRST 0x80000000 + +#define HW_APBH_CTRL1 0x10 +#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001 +#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0 + +#define HW_APBH_CTRL2 0x20 + +#define HW_APBH_DEVSEL 0x30 + +#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70) +#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70) +#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70) +#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70) +#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70) +#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70) +#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70) +#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70) +#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70) +#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70) +#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70) +#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70) +#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70) +#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70) +#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70) +#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70) + +#define HW_APBH_CHn_NXTCMDAR 0x50 + +#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0 +#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 1 +#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 2 +#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 3 +#define BM_APBH_CHn_CMD_COMMAND 0x00000003 +#define BP_APBH_CHn_CMD_COMMAND 0 +#define BM_APBH_CHn_CMD_CHAIN 0x00000004 +#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010 +#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020 +#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBH_CHn_CMD_CMDWORDS 12 +#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBH_CHn_CMD_XFER_COUNT 16 + +#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70) +#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70) +#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70) +#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70) +#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70) +#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70) +#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70) +#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70) +#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70) +#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70) +#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70) +#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70) +#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70) +#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70) +#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70) +#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70) + +#define HW_APBH_CHn_SEMA 0x80 +#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000 +#define BP_APBH_CHn_SEMA_PHORE 16 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h new file mode 100644 index 000000000000..3b934a4d27f0 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h @@ -0,0 +1,119 @@ +/* + * stmp378x: APBX register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_APBX +#define _MACH_REGS_APBX + +#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000) +#define REGS_APBX_PHYS 0x80024000 +#define REGS_APBX_SIZE 0x2000 + +#define HW_APBX_CTRL0 0x0 +#define BM_APBX_CTRL0_CLKGATE 0x40000000 +#define BM_APBX_CTRL0_SFTRST 0x80000000 + +#define HW_APBX_CTRL1 0x10 + +#define HW_APBX_CTRL2 0x20 + +#define HW_APBX_CHANNEL_CTRL 0x30 +#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000 +#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL 16 + +#define HW_APBX_DEVSEL 0x40 + +#define HW_APBX_CH0_NXTCMDAR (0x110 + 0 * 0x70) +#define HW_APBX_CH1_NXTCMDAR (0x110 + 1 * 0x70) +#define HW_APBX_CH2_NXTCMDAR (0x110 + 2 * 0x70) +#define HW_APBX_CH3_NXTCMDAR (0x110 + 3 * 0x70) +#define HW_APBX_CH4_NXTCMDAR (0x110 + 4 * 0x70) +#define HW_APBX_CH5_NXTCMDAR (0x110 + 5 * 0x70) +#define HW_APBX_CH6_NXTCMDAR (0x110 + 6 * 0x70) +#define HW_APBX_CH7_NXTCMDAR (0x110 + 7 * 0x70) +#define HW_APBX_CH8_NXTCMDAR (0x110 + 8 * 0x70) +#define HW_APBX_CH9_NXTCMDAR (0x110 + 9 * 0x70) +#define HW_APBX_CH10_NXTCMDAR (0x110 + 10 * 0x70) +#define HW_APBX_CH11_NXTCMDAR (0x110 + 11 * 0x70) +#define HW_APBX_CH12_NXTCMDAR (0x110 + 12 * 0x70) +#define HW_APBX_CH13_NXTCMDAR (0x110 + 13 * 0x70) +#define HW_APBX_CH14_NXTCMDAR (0x110 + 14 * 0x70) +#define HW_APBX_CH15_NXTCMDAR (0x110 + 15 * 0x70) + +#define HW_APBX_CHn_NXTCMDAR 0x110 +#define BM_APBX_CHn_CMD_COMMAND 0x00000003 +#define BP_APBX_CHn_CMD_COMMAND 0 +#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0 +#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 1 +#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 2 +#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE 3 +#define BM_APBX_CHn_CMD_CHAIN 0x00000004 +#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBX_CHn_CMD_HALTONTERMINATE 0x00000100 +#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBX_CHn_CMD_CMDWORDS 12 +#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBX_CHn_CMD_XFER_COUNT 16 + +#define HW_APBX_CH0_BAR (0x130 + 0 * 0x70) +#define HW_APBX_CH1_BAR (0x130 + 1 * 0x70) +#define HW_APBX_CH2_BAR (0x130 + 2 * 0x70) +#define HW_APBX_CH3_BAR (0x130 + 3 * 0x70) +#define HW_APBX_CH4_BAR (0x130 + 4 * 0x70) +#define HW_APBX_CH5_BAR (0x130 + 5 * 0x70) +#define HW_APBX_CH6_BAR (0x130 + 6 * 0x70) +#define HW_APBX_CH7_BAR (0x130 + 7 * 0x70) +#define HW_APBX_CH8_BAR (0x130 + 8 * 0x70) +#define HW_APBX_CH9_BAR (0x130 + 9 * 0x70) +#define HW_APBX_CH10_BAR (0x130 + 10 * 0x70) +#define HW_APBX_CH11_BAR (0x130 + 11 * 0x70) +#define HW_APBX_CH12_BAR (0x130 + 12 * 0x70) +#define HW_APBX_CH13_BAR (0x130 + 13 * 0x70) +#define HW_APBX_CH14_BAR (0x130 + 14 * 0x70) +#define HW_APBX_CH15_BAR (0x130 + 15 * 0x70) + +#define HW_APBX_CHn_BAR 0x130 + +#define HW_APBX_CH0_SEMA (0x140 + 0 * 0x70) +#define HW_APBX_CH1_SEMA (0x140 + 1 * 0x70) +#define HW_APBX_CH2_SEMA (0x140 + 2 * 0x70) +#define HW_APBX_CH3_SEMA (0x140 + 3 * 0x70) +#define HW_APBX_CH4_SEMA (0x140 + 4 * 0x70) +#define HW_APBX_CH5_SEMA (0x140 + 5 * 0x70) +#define HW_APBX_CH6_SEMA (0x140 + 6 * 0x70) +#define HW_APBX_CH7_SEMA (0x140 + 7 * 0x70) +#define HW_APBX_CH8_SEMA (0x140 + 8 * 0x70) +#define HW_APBX_CH9_SEMA (0x140 + 9 * 0x70) +#define HW_APBX_CH10_SEMA (0x140 + 10 * 0x70) +#define HW_APBX_CH11_SEMA (0x140 + 11 * 0x70) +#define HW_APBX_CH12_SEMA (0x140 + 12 * 0x70) +#define HW_APBX_CH13_SEMA (0x140 + 13 * 0x70) +#define HW_APBX_CH14_SEMA (0x140 + 14 * 0x70) +#define HW_APBX_CH15_SEMA (0x140 + 15 * 0x70) + +#define HW_APBX_CHn_SEMA 0x140 +#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000 +#define BP_APBX_CHn_SEMA_PHORE 16 + +#endif + diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h new file mode 100644 index 000000000000..641ac6126f83 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h @@ -0,0 +1,63 @@ +/* + * stmp378x: AUDIOIN register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000) +#define REGS_AUDIOIN_PHYS 0x8004C000 +#define REGS_AUDIOIN_SIZE 0x2000 + +#define HW_AUDIOIN_CTRL 0x0 +#define BM_AUDIOIN_CTRL_RUN 0x00000001 +#define BP_AUDIOIN_CTRL_RUN 0 +#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020 +#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000 +#define BM_AUDIOIN_CTRL_SFTRST 0x80000000 + +#define HW_AUDIOIN_STAT 0x10 + +#define HW_AUDIOIN_ADCSRR 0x20 + +#define HW_AUDIOIN_ADCVOLUME 0x30 +#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF +#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0 +#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000 +#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16 + +#define HW_AUDIOIN_ADCDEBUG 0x40 + +#define HW_AUDIOIN_ADCVOL 0x50 +#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F +#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0 +#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030 +#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4 +#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00 +#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8 +#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000 +#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12 +#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000 + +#define HW_AUDIOIN_MICLINE 0x60 + +#define HW_AUDIOIN_ANACLKCTRL 0x70 +#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000 + +#define HW_AUDIOIN_DATA 0x80 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h new file mode 100644 index 000000000000..f533e23694a0 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h @@ -0,0 +1,104 @@ +/* + * stmp378x: AUDIOOUT register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000) +#define REGS_AUDIOOUT_PHYS 0x80048000 +#define REGS_AUDIOOUT_SIZE 0x2000 + +#define HW_AUDIOOUT_CTRL 0x0 +#define BM_AUDIOOUT_CTRL_RUN 0x00000001 +#define BP_AUDIOOUT_CTRL_RUN 0 +#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040 +#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000 +#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000 + +#define HW_AUDIOOUT_STAT 0x10 + +#define HW_AUDIOOUT_DACSRR 0x20 +#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF +#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0 +#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000 +#define BP_AUDIOOUT_DACSRR_SRC_INT 16 +#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000 +#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24 +#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000 +#define BP_AUDIOOUT_DACSRR_BASEMULT 28 + +#define HW_AUDIOOUT_DACVOLUME 0x30 +#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100 +#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000 +#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000 + +#define HW_AUDIOOUT_DACDEBUG 0x40 + +#define HW_AUDIOOUT_HPVOL 0x50 +#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000 +#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000 + +#define HW_AUDIOOUT_PWRDN 0x70 +#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001 +#define BP_AUDIOOUT_PWRDN_HEADPHONE 0 +#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010 +#define BM_AUDIOOUT_PWRDN_ADC 0x00000100 +#define BM_AUDIOOUT_PWRDN_DAC 0x00001000 +#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000 +#define BM_AUDIOOUT_PWRDN_SPEAKER 0x01000000 + +#define HW_AUDIOOUT_REFCTRL 0x80 +#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0 +#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4 +#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00 +#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8 +#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000 +#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000 +#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000 +#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16 +#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000 +#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000 +#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20 +#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000 +#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000 + +#define HW_AUDIOOUT_ANACTRL 0x90 +#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010 +#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020 + +#define HW_AUDIOOUT_TEST 0xA0 +#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000 +#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22 + +#define HW_AUDIOOUT_BISTCTRL 0xB0 + +#define HW_AUDIOOUT_BISTSTAT0 0xC0 + +#define HW_AUDIOOUT_BISTSTAT1 0xD0 + +#define HW_AUDIOOUT_ANACLKCTRL 0xE0 +#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000 + +#define HW_AUDIOOUT_DATA 0xF0 + +#define HW_AUDIOOUT_SPEAKERCTRL 0x100 +#define BM_AUDIOOUT_SPEAKERCTRL_MUTE 0x01000000 + +#define HW_AUDIOOUT_VERSION 0x200 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h new file mode 100644 index 000000000000..532d24650717 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-bch.h @@ -0,0 +1,56 @@ +/* + * stmp378x: BCH register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_BCH_BASE (STMP3XXX_REGS_BASE + 0xA000) +#define REGS_BCH_PHYS 0x8000A000 +#define REGS_BCH_SIZE 0x2000 + +#define HW_BCH_CTRL 0x0 +#define BM_BCH_CTRL_COMPLETE_IRQ 0x00000001 +#define BP_BCH_CTRL_COMPLETE_IRQ 0 +#define BM_BCH_CTRL_COMPLETE_IRQ_EN 0x00000100 + +#define HW_BCH_STATUS0 0x10 +#define BM_BCH_STATUS0_UNCORRECTABLE 0x00000004 +#define BM_BCH_STATUS0_CORRECTED 0x00000008 +#define BM_BCH_STATUS0_STATUS_BLK0 0x0000FF00 +#define BP_BCH_STATUS0_STATUS_BLK0 8 +#define BM_BCH_STATUS0_COMPLETED_CE 0x000F0000 +#define BP_BCH_STATUS0_COMPLETED_CE 16 + +#define HW_BCH_LAYOUTSELECT 0x70 + +#define HW_BCH_FLASH0LAYOUT0 0x80 +#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE 0x00000FFF +#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0 +#define BM_BCH_FLASH0LAYOUT0_ECC0 0x0000F000 +#define BP_BCH_FLASH0LAYOUT0_ECC0 12 +#define BM_BCH_FLASH0LAYOUT0_META_SIZE 0x00FF0000 +#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16 +#define BM_BCH_FLASH0LAYOUT0_NBLOCKS 0xFF000000 +#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24 +#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE 0x00000FFF +#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0 +#define BM_BCH_FLASH0LAYOUT1_ECCN 0x0000F000 +#define BP_BCH_FLASH0LAYOUT1_ECCN 12 +#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE 0xFFFF0000 +#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16 + +#define HW_BCH_BLOCKNAME 0x150 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h new file mode 100644 index 000000000000..7c546afd57a3 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h @@ -0,0 +1,88 @@ +/* + * stmp378x: CLKCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_CLKCTRL +#define _MACH_REGS_CLKCTRL + +#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000) +#define REGS_CLKCTRL_PHYS 0x80040000 +#define REGS_CLKCTRL_SIZE 0x2000 + +#define HW_CLKCTRL_PLLCTRL0 0x0 +#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 + +#define HW_CLKCTRL_CPU 0x20 +#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F +#define BP_CLKCTRL_CPU_DIV_CPU 0 + +#define HW_CLKCTRL_HBUS 0x30 +#define BM_CLKCTRL_HBUS_DIV 0x0000001F +#define BP_CLKCTRL_HBUS_DIV 0 +#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 + +#define HW_CLKCTRL_XBUS 0x40 + +#define HW_CLKCTRL_XTAL 0x50 +#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000 + +#define HW_CLKCTRL_PIX 0x60 +#define BM_CLKCTRL_PIX_DIV 0x00000FFF +#define BP_CLKCTRL_PIX_DIV 0 +#define BM_CLKCTRL_PIX_CLKGATE 0x80000000 + +#define HW_CLKCTRL_SSP 0x70 + +#define HW_CLKCTRL_GPMI 0x80 + +#define HW_CLKCTRL_SPDIF 0x90 + +#define HW_CLKCTRL_EMI 0xA0 +#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F +#define BP_CLKCTRL_EMI_DIV_EMI 0 +#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 +#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 +#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 +#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000 + +#define HW_CLKCTRL_IR 0xB0 + +#define HW_CLKCTRL_SAIF 0xC0 + +#define HW_CLKCTRL_TV 0xD0 + +#define HW_CLKCTRL_ETM 0xE0 + +#define HW_CLKCTRL_FRAC 0xF0 +#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00 +#define BP_CLKCTRL_FRAC_EMIFRAC 8 +#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000 +#define BP_CLKCTRL_FRAC_PIXFRAC 16 +#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000 + +#define HW_CLKCTRL_FRAC1 0x100 + +#define HW_CLKCTRL_CLKSEQ 0x110 +#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 + +#define HW_CLKCTRL_RESET 0x120 +#define BM_CLKCTRL_RESET_DIG 0x00000001 +#define BP_CLKCTRL_RESET_DIG 0 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h new file mode 100644 index 000000000000..fdedd00c0e28 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h @@ -0,0 +1,87 @@ +/* + * stmp378x: DCP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DCP_BASE (STMP3XXX_REGS_BASE + 0x28000) +#define REGS_DCP_PHYS 0x80028000 +#define REGS_DCP_SIZE 0x2000 + +#define HW_DCP_CTRL 0x0 +#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0x000000FF +#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0 +#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING 0x00400000 +#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES 0x00800000 +#define BM_DCP_CTRL_CLKGATE 0x40000000 +#define BM_DCP_CTRL_SFTRST 0x80000000 + +#define HW_DCP_STAT 0x10 +#define BM_DCP_STAT_IRQ 0x0000000F +#define BP_DCP_STAT_IRQ 0 + +#define HW_DCP_CHANNELCTRL 0x20 +#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL 0x000000FF +#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL 0 + +#define HW_DCP_CONTEXT 0x50 +#define BM_DCP_PACKET1_INTERRUPT 0x00000001 +#define BP_DCP_PACKET1_INTERRUPT 0 +#define BM_DCP_PACKET1_DECR_SEMAPHORE 0x00000002 +#define BM_DCP_PACKET1_CHAIN 0x00000004 +#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS 0x00000008 +#define BM_DCP_PACKET1_ENABLE_CIPHER 0x00000020 +#define BM_DCP_PACKET1_ENABLE_HASH 0x00000040 +#define BM_DCP_PACKET1_CIPHER_ENCRYPT 0x00000100 +#define BM_DCP_PACKET1_CIPHER_INIT 0x00000200 +#define BM_DCP_PACKET1_OTP_KEY 0x00000400 +#define BM_DCP_PACKET1_PAYLOAD_KEY 0x00000800 +#define BM_DCP_PACKET1_HASH_INIT 0x00001000 +#define BM_DCP_PACKET1_HASH_TERM 0x00002000 +#define BM_DCP_PACKET2_CIPHER_SELECT 0x0000000F +#define BP_DCP_PACKET2_CIPHER_SELECT 0 +#define BM_DCP_PACKET2_CIPHER_MODE 0x000000F0 +#define BP_DCP_PACKET2_CIPHER_MODE 4 +#define BM_DCP_PACKET2_KEY_SELECT 0x0000FF00 +#define BP_DCP_PACKET2_KEY_SELECT 8 +#define BM_DCP_PACKET2_HASH_SELECT 0x000F0000 +#define BP_DCP_PACKET2_HASH_SELECT 16 +#define BM_DCP_PACKET2_CIPHER_CFG 0xFF000000 +#define BP_DCP_PACKET2_CIPHER_CFG 24 + +#define HW_DCP_CH0CMDPTR (0x100 + 0 * 0x40) +#define HW_DCP_CH1CMDPTR (0x100 + 1 * 0x40) +#define HW_DCP_CH2CMDPTR (0x100 + 2 * 0x40) +#define HW_DCP_CH3CMDPTR (0x100 + 3 * 0x40) + +#define HW_DCP_CHnCMDPTR 0x100 + +#define HW_DCP_CH0SEMA (0x110 + 0 * 0x40) +#define HW_DCP_CH1SEMA (0x110 + 1 * 0x40) +#define HW_DCP_CH2SEMA (0x110 + 2 * 0x40) +#define HW_DCP_CH3SEMA (0x110 + 3 * 0x40) + +#define HW_DCP_CHnSEMA 0x110 +#define BM_DCP_CHnSEMA_INCREMENT 0x000000FF +#define BP_DCP_CHnSEMA_INCREMENT 0 + +#define HW_DCP_CH0STAT (0x120 + 0 * 0x40) +#define HW_DCP_CH1STAT (0x120 + 1 * 0x40) +#define HW_DCP_CH2STAT (0x120 + 2 * 0x40) +#define HW_DCP_CH3STAT (0x120 + 3 * 0x40) + +#define HW_DCP_CHnSTAT 0x120 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h new file mode 100644 index 000000000000..5293005523b3 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h @@ -0,0 +1,38 @@ +/* + * stmp378x: DIGCTL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000) +#define REGS_DIGCTL_PHYS 0x8001C000 +#define REGS_DIGCTL_SIZE 0x2000 + +#define HW_DIGCTL_CTRL 0x0 +#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004 + +#define HW_DIGCTL_ARMCACHE 0x2B0 +#define BM_DIGCTL_ARMCACHE_ITAG_SS 0x00000003 +#define BP_DIGCTL_ARMCACHE_ITAG_SS 0 +#define BM_DIGCTL_ARMCACHE_DTAG_SS 0x00000030 +#define BP_DIGCTL_ARMCACHE_DTAG_SS 4 +#define BM_DIGCTL_ARMCACHE_CACHE_SS 0x00000300 +#define BP_DIGCTL_ARMCACHE_CACHE_SS 8 +#define BM_DIGCTL_ARMCACHE_DRTY_SS 0x00003000 +#define BP_DIGCTL_ARMCACHE_DRTY_SS 12 +#define BM_DIGCTL_ARMCACHE_VALID_SS 0x00030000 +#define BP_DIGCTL_ARMCACHE_VALID_SS 16 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h new file mode 100644 index 000000000000..02851431677c --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-dram.h @@ -0,0 +1,27 @@ +/* + * stmp378x: DRAM register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DRAM_BASE (STMP3XXX_REGS_BASE + 0xE0000) +#define REGS_DRAM_PHYS 0x800E0000 +#define REGS_DRAM_SIZE 0x2000 + +#define HW_DRAM_CTL06 0x18 + +#define HW_DRAM_CTL08 0x20 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h new file mode 100644 index 000000000000..da25f7e397e5 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-dri.h @@ -0,0 +1,45 @@ +/* + * stmp378x: DRI register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DRI_BASE (STMP3XXX_REGS_BASE + 0x74000) +#define REGS_DRI_PHYS 0x80074000 +#define REGS_DRI_SIZE 0x2000 + +#define HW_DRI_CTRL 0x0 +#define BM_DRI_CTRL_RUN 0x00000001 +#define BP_DRI_CTRL_RUN 0 +#define BM_DRI_CTRL_ATTENTION_IRQ 0x00000002 +#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ 0x00000004 +#define BM_DRI_CTRL_OVERFLOW_IRQ 0x00000008 +#define BM_DRI_CTRL_ATTENTION_IRQ_EN 0x00000200 +#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN 0x00000400 +#define BM_DRI_CTRL_OVERFLOW_IRQ_EN 0x00000800 +#define BM_DRI_CTRL_REACQUIRE_PHASE 0x00008000 +#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR 0x02000000 +#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR 0x04000000 +#define BM_DRI_CTRL_ENABLE_INPUTS 0x20000000 +#define BM_DRI_CTRL_CLKGATE 0x40000000 +#define BM_DRI_CTRL_SFTRST 0x80000000 + +#define HW_DRI_TIMING 0x10 +#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL 0x000000FF +#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL 0 +#define BM_DRI_TIMING_PILOT_REP_RATE 0x000F0000 +#define BP_DRI_TIMING_PILOT_REP_RATE 16 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h new file mode 100644 index 000000000000..cc353bec331b --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h @@ -0,0 +1,39 @@ +/* + * stmp378x: ECC8 register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000) +#define REGS_ECC8_PHYS 0x80008000 +#define REGS_ECC8_SIZE 0x2000 + +#define HW_ECC8_CTRL 0x0 +#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001 +#define BP_ECC8_CTRL_COMPLETE_IRQ 0 +#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100 +#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000 + +#define HW_ECC8_STATUS0 0x10 +#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004 +#define BM_ECC8_STATUS0_CORRECTED 0x00000008 +#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00 +#define BP_ECC8_STATUS0_STATUS_AUX 8 +#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000 +#define BP_ECC8_STATUS0_COMPLETED_CE 16 + +#define HW_ECC8_STATUS1 0x20 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h new file mode 100644 index 000000000000..98773fc33d7b --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-emi.h @@ -0,0 +1,25 @@ +/* + * stmp378x: EMI register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_EMI_BASE (STMP3XXX_REGS_BASE + 0x20000) +#define REGS_EMI_PHYS 0x80020000 +#define REGS_EMI_SIZE 0x2000 + +#define HW_EMI_STAT 0x10 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h new file mode 100644 index 000000000000..2cc8bbe91687 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h @@ -0,0 +1,78 @@ +/* + * stmp378x: GPMI register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000) +#define REGS_GPMI_PHYS 0x8000C000 +#define REGS_GPMI_SIZE 0x2000 + +#define HW_GPMI_CTRL0 0x0 +#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_GPMI_CTRL0_XFER_COUNT 0 +#define BM_GPMI_CTRL0_CS 0x00300000 +#define BP_GPMI_CTRL0_CS 20 +#define BM_GPMI_CTRL0_LOCK_CS 0x00400000 +#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000 +#define BM_GPMI_CTRL0_ADDRESS 0x000E0000 +#define BP_GPMI_CTRL0_ADDRESS 17 +#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0 +#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1 +#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2 +#define BM_GPMI_CTRL0_ADDRESS_INCREMENT 0x00010000 +#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000 +#define BP_GPMI_CTRL0_COMMAND_MODE 24 +#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2 +#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3 +#define BM_GPMI_CTRL0_RUN 0x20000000 +#define BM_GPMI_CTRL0_CLKGATE 0x40000000 +#define BM_GPMI_CTRL0_SFTRST 0x80000000 +#define BM_GPMI_ECCCTRL_BUFFER_MASK 0x000001FF +#define BP_GPMI_ECCCTRL_BUFFER_MASK 0 +#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000 +#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000 +#define BP_GPMI_ECCCTRL_ECC_CMD 13 +#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT 0 +#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT 1 +#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT 2 +#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT 3 + +#define HW_GPMI_CTRL1 0x60 +#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001 +#define BP_GPMI_CTRL1_GPMI_MODE 0 +#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004 +#define BM_GPMI_CTRL1_DEV_RESET 0x00000008 +#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200 +#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400 +#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000 +#define BP_GPMI_CTRL1_RDN_DELAY 12 +#define BM_GPMI_CTRL1_BCH_MODE 0x00040000 + +#define HW_GPMI_TIMING0 0x70 +#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF +#define BP_GPMI_TIMING0_DATA_SETUP 0 +#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00 +#define BP_GPMI_TIMING0_DATA_HOLD 8 +#define BM_GPMI_TIMING0_ADDRESS_SETUP 0x00FF0000 +#define BP_GPMI_TIMING0_ADDRESS_SETUP 16 + +#define HW_GPMI_TIMING1 0x80 +#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000 +#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h new file mode 100644 index 000000000000..13a234c99433 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h @@ -0,0 +1,55 @@ +/* + * stmp378x: I2C register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000) +#define REGS_I2C_PHYS 0x80058000 +#define REGS_I2C_SIZE 0x2000 + +#define HW_I2C_CTRL0 0x0 +#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_I2C_CTRL0_XFER_COUNT 0 +#define BM_I2C_CTRL0_DIRECTION 0x00010000 +#define BM_I2C_CTRL0_MASTER_MODE 0x00020000 +#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000 +#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000 +#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000 +#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000 +#define BM_I2C_CTRL0_CLKGATE 0x40000000 +#define BM_I2C_CTRL0_SFTRST 0x80000000 + +#define HW_I2C_TIMING0 0x10 + +#define HW_I2C_TIMING1 0x20 + +#define HW_I2C_TIMING2 0x30 + +#define HW_I2C_CTRL1 0x40 +#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001 +#define BP_I2C_CTRL1_SLAVE_IRQ 0 +#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002 +#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004 +#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008 +#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010 +#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020 +#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040 +#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080 +#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000 + +#define HW_I2C_VERSION 0x90 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h new file mode 100644 index 000000000000..f996e80f40e7 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h @@ -0,0 +1,45 @@ +/* + * stmp378x: ICOLL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_ICOLL +#define _MACH_REGS_ICOLL + +#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0) +#define REGS_ICOLL_PHYS 0x80000000 +#define REGS_ICOLL_SIZE 0x2000 + +#define HW_ICOLL_VECTOR 0x0 + +#define HW_ICOLL_LEVELACK 0x10 +#define BM_ICOLL_LEVELACK_IRQLEVELACK 0x0000000F +#define BP_ICOLL_LEVELACK_IRQLEVELACK 0 + +#define HW_ICOLL_CTRL 0x20 +#define BM_ICOLL_CTRL_CLKGATE 0x40000000 +#define BM_ICOLL_CTRL_SFTRST 0x80000000 + +#define HW_ICOLL_STAT 0x70 + +#define HW_ICOLL_INTERRUPTn 0x120 + +#define HW_ICOLL_INTERRUPTn 0x120 +#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004 + +#endif diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h index 9e197ae4590f..a5b4ef10fab8 100644 --- a/arch/arm/mach-imx/include/mach/io.h +++ b/arch/arm/mach-stmp378x/include/mach/regs-ir.h @@ -1,7 +1,8 @@ /* - * arch/arm/mach-imxads/include/mach/io.h + * stmp378x: IR register definitions * - * Copyright (C) 1999 ARM Limited + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,14 +16,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif +#define REGS_IR_BASE (STMP3XXX_REGS_BASE + 0x78000) +#define REGS_IR_PHYS 0x80078000 +#define REGS_IR_SIZE 0x2000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h new file mode 100644 index 000000000000..9cdbef4badc3 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h @@ -0,0 +1,195 @@ +/* + * stmp378x: LCDIF register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000) +#define REGS_LCDIF_PHYS 0x80030000 +#define REGS_LCDIF_SIZE 0x2000 + +#define HW_LCDIF_CTRL 0x0 +#define BM_LCDIF_CTRL_RUN 0x00000001 +#define BP_LCDIF_CTRL_RUN 0 +#define BM_LCDIF_CTRL_LCDIF_MASTER 0x00000020 +#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC 0x00000080 +#define BM_LCDIF_CTRL_WORD_LENGTH 0x00000300 +#define BP_LCDIF_CTRL_WORD_LENGTH 8 +#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH 0x00000C00 +#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH 10 +#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE 0x0000C000 +#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE 14 +#define BM_LCDIF_CTRL_DATA_SELECT 0x00010000 +#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00020000 +#define BM_LCDIF_CTRL_VSYNC_MODE 0x00040000 +#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00080000 +#define BM_LCDIF_CTRL_DVI_MODE 0x00100000 +#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x03E00000 +#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 21 +#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x04000000 +#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x08000000 +#define BM_LCDIF_CTRL_CLKGATE 0x40000000 +#define BM_LCDIF_CTRL_SFTRST 0x80000000 + +#define HW_LCDIF_CTRL1 0x10 +#define BM_LCDIF_CTRL1_RESET 0x00000001 +#define BP_LCDIF_CTRL1_RESET 0 +#define BM_LCDIF_CTRL1_MODE86 0x00000002 +#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004 +#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100 +#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200 +#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400 +#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800 +#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000 +#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000 +#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16 +#define BM_LCDIF_CTRL1_INTERLACE_FIELDS 0x00800000 +#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW 0x01000000 + +#define HW_LCDIF_TRANSFER_COUNT 0x20 +#define BM_LCDIF_TRANSFER_COUNT_H_COUNT 0x0000FFFF +#define BP_LCDIF_TRANSFER_COUNT_H_COUNT 0 +#define BM_LCDIF_TRANSFER_COUNT_V_COUNT 0xFFFF0000 +#define BP_LCDIF_TRANSFER_COUNT_V_COUNT 16 + +#define HW_LCDIF_CUR_BUF 0x30 + +#define HW_LCDIF_NEXT_BUF 0x40 + +#define HW_LCDIF_TIMING 0x60 + +#define HW_LCDIF_VDCTRL0 0x70 +#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0x0003FFFF +#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0 +#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000 +#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000 +#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000 +#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000 +#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000 +#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000 +#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000 +#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000 + +#define HW_LCDIF_VDCTRL1 0x80 +#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0xFFFFFFFF +#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0 + +#define HW_LCDIF_VDCTRL2 0x90 +#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x0003FFFF +#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 0 +#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF000000 +#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 24 + +#define HW_LCDIF_VDCTRL3 0xA0 +#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x0000FFFF +#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0 +#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x0FFF0000 +#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 16 + +#define HW_LCDIF_VDCTRL4 0xB0 +#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0x0003FFFF +#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0 +#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON 0x00040000 + +#define HW_LCDIF_DVICTRL0 0xC0 +#define BM_LCDIF_DVICTRL0_V_LINES_CNT 0x000003FF +#define BP_LCDIF_DVICTRL0_V_LINES_CNT 0 +#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT 0x000FFC00 +#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT 10 +#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT 0x7FF00000 +#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT 20 + +#define HW_LCDIF_DVICTRL1 0xD0 +#define BM_LCDIF_DVICTRL1_F2_START_LINE 0x000003FF +#define BP_LCDIF_DVICTRL1_F2_START_LINE 0 +#define BM_LCDIF_DVICTRL1_F1_END_LINE 0x000FFC00 +#define BP_LCDIF_DVICTRL1_F1_END_LINE 10 +#define BM_LCDIF_DVICTRL1_F1_START_LINE 0x3FF00000 +#define BP_LCDIF_DVICTRL1_F1_START_LINE 20 + +#define HW_LCDIF_DVICTRL2 0xE0 +#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0x000003FF +#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0 +#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE 0x000FFC00 +#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE 10 +#define BM_LCDIF_DVICTRL2_F2_END_LINE 0x3FF00000 +#define BP_LCDIF_DVICTRL2_F2_END_LINE 20 + +#define HW_LCDIF_DVICTRL3 0xF0 +#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0x000003FF +#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0 +#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE 0x03FF0000 +#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE 16 + +#define HW_LCDIF_DVICTRL4 0x100 +#define BM_LCDIF_DVICTRL4_H_FILL_CNT 0x000000FF +#define BP_LCDIF_DVICTRL4_H_FILL_CNT 0 +#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE 0x0000FF00 +#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE 8 +#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE 0x00FF0000 +#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE 16 +#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE 0xFF000000 +#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE 24 + +#define HW_LCDIF_CSC_COEFF0 0x110 +#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0x00000003 +#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0 +#define BM_LCDIF_CSC_COEFF0_C0 0x03FF0000 +#define BP_LCDIF_CSC_COEFF0_C0 16 + +#define HW_LCDIF_CSC_COEFF1 0x120 +#define BM_LCDIF_CSC_COEFF1_C1 0x000003FF +#define BP_LCDIF_CSC_COEFF1_C1 0 +#define BM_LCDIF_CSC_COEFF1_C2 0x03FF0000 +#define BP_LCDIF_CSC_COEFF1_C2 16 + +#define HW_LCDIF_CSC_COEFF2 0x130 +#define BM_LCDIF_CSC_COEFF2_C3 0x000003FF +#define BP_LCDIF_CSC_COEFF2_C3 0 +#define BM_LCDIF_CSC_COEFF2_C4 0x03FF0000 +#define BP_LCDIF_CSC_COEFF2_C4 16 + +#define HW_LCDIF_CSC_COEFF3 0x140 +#define BM_LCDIF_CSC_COEFF3_C5 0x000003FF +#define BP_LCDIF_CSC_COEFF3_C5 0 +#define BM_LCDIF_CSC_COEFF3_C6 0x03FF0000 +#define BP_LCDIF_CSC_COEFF3_C6 16 + +#define HW_LCDIF_CSC_COEFF4 0x150 +#define BM_LCDIF_CSC_COEFF4_C7 0x000003FF +#define BP_LCDIF_CSC_COEFF4_C7 0 +#define BM_LCDIF_CSC_COEFF4_C8 0x03FF0000 +#define BP_LCDIF_CSC_COEFF4_C8 16 + +#define HW_LCDIF_CSC_OFFSET 0x160 +#define BM_LCDIF_CSC_OFFSET_Y_OFFSET 0x000001FF +#define BP_LCDIF_CSC_OFFSET_Y_OFFSET 0 +#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET 0x01FF0000 +#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET 16 + +#define HW_LCDIF_CSC_LIMIT 0x170 +#define BM_LCDIF_CSC_LIMIT_Y_MAX 0x000000FF +#define BP_LCDIF_CSC_LIMIT_Y_MAX 0 +#define BM_LCDIF_CSC_LIMIT_Y_MIN 0x0000FF00 +#define BP_LCDIF_CSC_LIMIT_Y_MIN 8 +#define BM_LCDIF_CSC_LIMIT_CBCR_MAX 0x00FF0000 +#define BP_LCDIF_CSC_LIMIT_CBCR_MAX 16 +#define BM_LCDIF_CSC_LIMIT_CBCR_MIN 0xFF000000 +#define BP_LCDIF_CSC_LIMIT_CBCR_MIN 24 + +#define HW_LCDIF_STAT 0x1D0 +#define BM_LCDIF_STAT_TXFIFO_EMPTY 0x04000000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h new file mode 100644 index 000000000000..cb8cb06f8277 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h @@ -0,0 +1,99 @@ +/* + * stmp378x: LRADC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000) +#define REGS_LRADC_PHYS 0x80050000 +#define REGS_LRADC_SIZE 0x2000 + +#define HW_LRADC_CTRL0 0x0 +#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF +#define BP_LRADC_CTRL0_SCHEDULE 0 +#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000 +#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000 +#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000 +#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000 +#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000 +#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000 +#define BM_LRADC_CTRL0_CLKGATE 0x40000000 +#define BM_LRADC_CTRL0_SFTRST 0x80000000 + +#define HW_LRADC_CTRL1 0x10 +#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001 +#define BP_LRADC_CTRL1_LRADC0_IRQ 0 +#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020 +#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040 +#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100 +#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000 +#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000 +#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000 + +#define HW_LRADC_CTRL2 0x20 +#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000 +#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16 +#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000 +#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000 +#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000 +#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24 + +#define HW_LRADC_CTRL3 0x30 +#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300 +#define BP_LRADC_CTRL3_CYCLE_TIME 8 + +#define HW_LRADC_STATUS 0x40 +#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001 +#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0 + +#define HW_LRADC_CH0 (0x50 + 0 * 0x10) +#define HW_LRADC_CH1 (0x50 + 1 * 0x10) +#define HW_LRADC_CH2 (0x50 + 2 * 0x10) +#define HW_LRADC_CH3 (0x50 + 3 * 0x10) +#define HW_LRADC_CH4 (0x50 + 4 * 0x10) +#define HW_LRADC_CH5 (0x50 + 5 * 0x10) +#define HW_LRADC_CH6 (0x50 + 6 * 0x10) +#define HW_LRADC_CH7 (0x50 + 7 * 0x10) + +#define HW_LRADC_CHn 0x50 +#define BM_LRADC_CHn_VALUE 0x0003FFFF +#define BP_LRADC_CHn_VALUE 0 +#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000 +#define BP_LRADC_CHn_NUM_SAMPLES 24 +#define BM_LRADC_CHn_ACCUMULATE 0x20000000 + +#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10) +#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10) +#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10) +#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10) + +#define HW_LRADC_DELAYn 0xD0 +#define BM_LRADC_DELAYn_DELAY 0x000007FF +#define BP_LRADC_DELAYn_DELAY 0 +#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800 +#define BP_LRADC_DELAYn_LOOP_COUNT 11 +#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000 +#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16 +#define BM_LRADC_DELAYn_KICK 0x00100000 +#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000 +#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24 + +#define HW_LRADC_CTRL4 0x140 +#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000 +#define BP_LRADC_CTRL4_LRADC6SELECT 24 +#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000 +#define BP_LRADC_CTRL4_LRADC7SELECT 28 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h new file mode 100644 index 000000000000..f0af64d9937e --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h @@ -0,0 +1,40 @@ +/* + * stmp378x: OCOTP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_OCOTP_BASE (STMP3XXX_REGS_BASE + 0x2C000) +#define REGS_OCOTP_PHYS 0x8002C000 +#define REGS_OCOTP_SIZE 0x2000 + +#define HW_OCOTP_CTRL 0x0 +#define BM_OCOTP_CTRL_BUSY 0x00000100 +#define BM_OCOTP_CTRL_ERROR 0x00000200 +#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000 +#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000 +#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000 +#define BP_OCOTP_CTRL_WR_UNLOCK 16 + +#define HW_OCOTP_DATA 0x10 + +#define HW_OCOTP_CUST0 (0x20 + 0 * 0x10) +#define HW_OCOTP_CUST1 (0x20 + 1 * 0x10) +#define HW_OCOTP_CUST2 (0x20 + 2 * 0x10) +#define HW_OCOTP_CUST3 (0x20 + 3 * 0x10) + +#define HW_OCOTP_CUSTn 0x20 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h new file mode 100644 index 000000000000..50d90ea1b136 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h @@ -0,0 +1,90 @@ +/* + * stmp378x: PINCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_PINCTRL +#define _MACH_REGS_PINCTRL + +#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000) +#define REGS_PINCTRL_PHYS 0x80018000 +#define REGS_PINCTRL_SIZE 0x2000 + +#define HW_PINCTRL_MUXSEL0 0x100 +#define HW_PINCTRL_MUXSEL1 0x110 +#define HW_PINCTRL_MUXSEL2 0x120 +#define HW_PINCTRL_MUXSEL3 0x130 +#define HW_PINCTRL_MUXSEL4 0x140 +#define HW_PINCTRL_MUXSEL5 0x150 +#define HW_PINCTRL_MUXSEL6 0x160 +#define HW_PINCTRL_MUXSEL7 0x170 + +#define HW_PINCTRL_DRIVE0 0x200 +#define HW_PINCTRL_DRIVE1 0x210 +#define HW_PINCTRL_DRIVE2 0x220 +#define HW_PINCTRL_DRIVE3 0x230 +#define HW_PINCTRL_DRIVE4 0x240 +#define HW_PINCTRL_DRIVE5 0x250 +#define HW_PINCTRL_DRIVE6 0x260 +#define HW_PINCTRL_DRIVE7 0x270 +#define HW_PINCTRL_DRIVE8 0x280 +#define HW_PINCTRL_DRIVE9 0x290 +#define HW_PINCTRL_DRIVE10 0x2A0 +#define HW_PINCTRL_DRIVE11 0x2B0 +#define HW_PINCTRL_DRIVE12 0x2C0 +#define HW_PINCTRL_DRIVE13 0x2D0 +#define HW_PINCTRL_DRIVE14 0x2E0 + +#define HW_PINCTRL_PULL0 0x400 +#define HW_PINCTRL_PULL1 0x410 +#define HW_PINCTRL_PULL2 0x420 +#define HW_PINCTRL_PULL3 0x430 + +#define HW_PINCTRL_DOUT0 0x500 +#define HW_PINCTRL_DOUT1 0x510 +#define HW_PINCTRL_DOUT2 0x520 + +#define HW_PINCTRL_DIN0 0x600 +#define HW_PINCTRL_DIN1 0x610 +#define HW_PINCTRL_DIN2 0x620 + +#define HW_PINCTRL_DOE0 0x700 +#define HW_PINCTRL_DOE1 0x710 +#define HW_PINCTRL_DOE2 0x720 + +#define HW_PINCTRL_PIN2IRQ0 0x800 +#define HW_PINCTRL_PIN2IRQ1 0x810 +#define HW_PINCTRL_PIN2IRQ2 0x820 + +#define HW_PINCTRL_IRQEN0 0x900 +#define HW_PINCTRL_IRQEN1 0x910 +#define HW_PINCTRL_IRQEN2 0x920 + +#define HW_PINCTRL_IRQLEVEL0 0xA00 +#define HW_PINCTRL_IRQLEVEL1 0xA10 +#define HW_PINCTRL_IRQLEVEL2 0xA20 + +#define HW_PINCTRL_IRQPOL0 0xB00 +#define HW_PINCTRL_IRQPOL1 0xB10 +#define HW_PINCTRL_IRQPOL2 0xB20 + +#define HW_PINCTRL_IRQSTAT0 0xC00 +#define HW_PINCTRL_IRQSTAT1 0xC10 +#define HW_PINCTRL_IRQSTAT2 0xC20 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h new file mode 100644 index 000000000000..e454c830f076 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-power.h @@ -0,0 +1,63 @@ +/* + * stmp378x: POWER register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_POWER +#define _MACH_REGS_POWER + +#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000) +#define REGS_POWER_PHYS 0x80044000 +#define REGS_POWER_SIZE 0x2000 + +#define HW_POWER_CTRL 0x0 +#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0x00000001 +#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0 +#define BM_POWER_CTRL_ENIRQ_PSWITCH 0x00020000 +#define BM_POWER_CTRL_PSWITCH_IRQ 0x00100000 +#define BM_POWER_CTRL_CLKGATE 0x40000000 + +#define HW_POWER_5VCTRL 0x10 +#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT 0x00000040 + +#define HW_POWER_MINPWR 0x20 + +#define HW_POWER_CHARGE 0x30 + +#define HW_POWER_VDDDCTRL 0x40 + +#define HW_POWER_VDDACTRL 0x50 + +#define HW_POWER_VDDIOCTRL 0x60 +#define BM_POWER_VDDIOCTRL_TRG 0x0000001F +#define BP_POWER_VDDIOCTRL_TRG 0 + +#define HW_POWER_STS 0xC0 +#define BM_POWER_STS_VBUSVALID 0x00000002 +#define BM_POWER_STS_BVALID 0x00000004 +#define BM_POWER_STS_AVALID 0x00000008 +#define BM_POWER_STS_DC_OK 0x00000200 + +#define HW_POWER_RESET 0x100 + +#define HW_POWER_DEBUG 0x110 +#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002 +#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004 +#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h new file mode 100644 index 000000000000..0d0f9e56ec77 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h @@ -0,0 +1,53 @@ +/* + * stmp378x: PWM register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000) +#define REGS_PWM_PHYS 0x80064000 +#define REGS_PWM_SIZE 0x2000 + +#define HW_PWM_CTRL 0x0 +#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004 +#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020 + +#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20) +#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20) +#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20) +#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20) + +#define HW_PWM_ACTIVEn 0x10 +#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF +#define BP_PWM_ACTIVEn_ACTIVE 0 +#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000 +#define BP_PWM_ACTIVEn_INACTIVE 16 + +#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20) +#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20) +#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20) +#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20) + +#define HW_PWM_PERIODn 0x20 +#define BM_PWM_PERIODn_PERIOD 0x0000FFFF +#define BP_PWM_PERIODn_PERIOD 0 +#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000 +#define BP_PWM_PERIODn_ACTIVE_STATE 16 +#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000 +#define BP_PWM_PERIODn_INACTIVE_STATE 18 +#define BM_PWM_PERIODn_CDIV 0x00700000 +#define BP_PWM_PERIODn_CDIV 20 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h new file mode 100644 index 000000000000..54d297896de8 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h @@ -0,0 +1,140 @@ +/* + * stmp378x: PXP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_PXP_BASE (STMP3XXX_REGS_BASE + 0x2A000) +#define REGS_PXP_PHYS 0x8002A000 +#define REGS_PXP_SIZE 0x2000 + +#define HW_PXP_CTRL 0x0 +#define BM_PXP_CTRL_ENABLE 0x00000001 +#define BP_PXP_CTRL_ENABLE 0 +#define BM_PXP_CTRL_IRQ_ENABLE 0x00000002 +#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT 0x000000F0 +#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT 4 +#define BM_PXP_CTRL_ROTATE 0x00000300 +#define BP_PXP_CTRL_ROTATE 8 +#define BM_PXP_CTRL_HFLIP 0x00000400 +#define BM_PXP_CTRL_VFLIP 0x00000800 +#define BM_PXP_CTRL_S0_FORMAT 0x0000F000 +#define BP_PXP_CTRL_S0_FORMAT 12 +#define BM_PXP_CTRL_SCALE 0x00040000 +#define BM_PXP_CTRL_CROP 0x00080000 + +#define HW_PXP_STAT 0x10 +#define BM_PXP_STAT_IRQ 0x00000001 +#define BP_PXP_STAT_IRQ 0 + +#define HW_PXP_RGBBUF 0x20 + +#define HW_PXP_RGBSIZE 0x40 +#define BM_PXP_RGBSIZE_HEIGHT 0x00000FFF +#define BP_PXP_RGBSIZE_HEIGHT 0 +#define BM_PXP_RGBSIZE_WIDTH 0x00FFF000 +#define BP_PXP_RGBSIZE_WIDTH 12 + +#define HW_PXP_S0BUF 0x50 + +#define HW_PXP_S0UBUF 0x60 + +#define HW_PXP_S0VBUF 0x70 + +#define HW_PXP_S0PARAM 0x80 +#define BM_PXP_S0PARAM_HEIGHT 0x000000FF +#define BP_PXP_S0PARAM_HEIGHT 0 +#define BM_PXP_S0PARAM_WIDTH 0x0000FF00 +#define BP_PXP_S0PARAM_WIDTH 8 +#define BM_PXP_S0PARAM_YBASE 0x00FF0000 +#define BP_PXP_S0PARAM_YBASE 16 +#define BM_PXP_S0PARAM_XBASE 0xFF000000 +#define BP_PXP_S0PARAM_XBASE 24 + +#define HW_PXP_S0BACKGROUND 0x90 + +#define HW_PXP_S0CROP 0xA0 +#define BM_PXP_S0CROP_HEIGHT 0x000000FF +#define BP_PXP_S0CROP_HEIGHT 0 +#define BM_PXP_S0CROP_WIDTH 0x0000FF00 +#define BP_PXP_S0CROP_WIDTH 8 +#define BM_PXP_S0CROP_YBASE 0x00FF0000 +#define BP_PXP_S0CROP_YBASE 16 +#define BM_PXP_S0CROP_XBASE 0xFF000000 +#define BP_PXP_S0CROP_XBASE 24 + +#define HW_PXP_S0SCALE 0xB0 +#define BM_PXP_S0SCALE_XSCALE 0x00003FFF +#define BP_PXP_S0SCALE_XSCALE 0 +#define BM_PXP_S0SCALE_YSCALE 0x3FFF0000 +#define BP_PXP_S0SCALE_YSCALE 16 + +#define HW_PXP_CSCCOEFF0 0xD0 + +#define HW_PXP_CSCCOEFF1 0xE0 + +#define HW_PXP_CSCCOEFF2 0xF0 + +#define HW_PXP_S0COLORKEYLOW 0x180 + +#define HW_PXP_S0COLORKEYHIGH 0x190 + +#define HW_PXP_OL0 (0x200 + 0 * 0x40) +#define HW_PXP_OL1 (0x200 + 1 * 0x40) +#define HW_PXP_OL2 (0x200 + 2 * 0x40) +#define HW_PXP_OL3 (0x200 + 3 * 0x40) +#define HW_PXP_OL4 (0x200 + 4 * 0x40) +#define HW_PXP_OL5 (0x200 + 5 * 0x40) +#define HW_PXP_OL6 (0x200 + 6 * 0x40) +#define HW_PXP_OL7 (0x200 + 7 * 0x40) + +#define HW_PXP_OLn 0x200 + +#define HW_PXP_OL0SIZE (0x210 + 0 * 0x40) +#define HW_PXP_OL1SIZE (0x210 + 1 * 0x40) +#define HW_PXP_OL2SIZE (0x210 + 2 * 0x40) +#define HW_PXP_OL3SIZE (0x210 + 3 * 0x40) +#define HW_PXP_OL4SIZE (0x210 + 4 * 0x40) +#define HW_PXP_OL5SIZE (0x210 + 5 * 0x40) +#define HW_PXP_OL6SIZE (0x210 + 6 * 0x40) +#define HW_PXP_OL7SIZE (0x210 + 7 * 0x40) + +#define HW_PXP_OLnSIZE 0x210 +#define BM_PXP_OLnSIZE_HEIGHT 0x000000FF +#define BP_PXP_OLnSIZE_HEIGHT 0 +#define BM_PXP_OLnSIZE_WIDTH 0x0000FF00 +#define BP_PXP_OLnSIZE_WIDTH 8 + +#define HW_PXP_OL0PARAM (0x220 + 0 * 0x40) +#define HW_PXP_OL1PARAM (0x220 + 1 * 0x40) +#define HW_PXP_OL2PARAM (0x220 + 2 * 0x40) +#define HW_PXP_OL3PARAM (0x220 + 3 * 0x40) +#define HW_PXP_OL4PARAM (0x220 + 4 * 0x40) +#define HW_PXP_OL5PARAM (0x220 + 5 * 0x40) +#define HW_PXP_OL6PARAM (0x220 + 6 * 0x40) +#define HW_PXP_OL7PARAM (0x220 + 7 * 0x40) + +#define HW_PXP_OLnPARAM 0x220 +#define BM_PXP_OLnPARAM_ENABLE 0x00000001 +#define BP_PXP_OLnPARAM_ENABLE 0 +#define BM_PXP_OLnPARAM_ALPHA_CNTL 0x00000006 +#define BP_PXP_OLnPARAM_ALPHA_CNTL 1 +#define BM_PXP_OLnPARAM_ENABLE_COLORKEY 0x00000008 +#define BM_PXP_OLnPARAM_FORMAT 0x000000F0 +#define BP_PXP_OLnPARAM_FORMAT 4 +#define BM_PXP_OLnPARAM_ALPHA 0x0000FF00 +#define BP_PXP_OLnPARAM_ALPHA 8 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h new file mode 100644 index 000000000000..b8dbd6742d98 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h @@ -0,0 +1,59 @@ +/* + * stmp378x: RTC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000) +#define REGS_RTC_PHYS 0x8005C000 +#define REGS_RTC_SIZE 0x2000 + +#define HW_RTC_CTRL 0x0 +#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001 +#define BP_RTC_CTRL_ALARM_IRQ_EN 0 +#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002 +#define BM_RTC_CTRL_ALARM_IRQ 0x00000004 +#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008 +#define BM_RTC_CTRL_WATCHDOGEN 0x00000010 + +#define HW_RTC_STAT 0x10 +#define BM_RTC_STAT_NEW_REGS 0x0000FF00 +#define BP_RTC_STAT_NEW_REGS 8 +#define BM_RTC_STAT_STALE_REGS 0x00FF0000 +#define BP_RTC_STAT_STALE_REGS 16 +#define BM_RTC_STAT_RTC_PRESENT 0x80000000 + +#define HW_RTC_SECONDS 0x30 + +#define HW_RTC_ALARM 0x40 + +#define HW_RTC_WATCHDOG 0x50 + +#define HW_RTC_PERSISTENT0 0x60 +#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002 +#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004 +#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010 +#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020 +#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080 +#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000 +#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18 + +#define HW_RTC_PERSISTENT1 0x70 +#define BM_RTC_PERSISTENT1_GENERAL 0xFFFFFFFF +#define BP_RTC_PERSISTENT1_GENERAL 0 + +#define HW_RTC_VERSION 0xD0 diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h index e22ba789546c..6df41762c2a3 100644 --- a/arch/arm/mach-imx/include/mach/timex.h +++ b/arch/arm/mach-stmp378x/include/mach/regs-saif.h @@ -1,7 +1,8 @@ /* - * linux/include/asm-arm/imx/timex.h + * stmp378x: SAIF register definitions * - * Copyright (C) 1999 ARM Limited + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,12 +16,6 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE (16000000) - -#endif +#define REGS_SAIF_SIZE 0x2000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h new file mode 100644 index 000000000000..801539848c28 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h @@ -0,0 +1,49 @@ +/* + * stmp378x: SPDIF register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SPDIF_BASE (STMP3XXX_REGS_BASE + 0x54000) +#define REGS_SPDIF_PHYS 0x80054000 +#define REGS_SPDIF_SIZE 0x2000 + +#define HW_SPDIF_CTRL 0x0 +#define BM_SPDIF_CTRL_RUN 0x00000001 +#define BP_SPDIF_CTRL_RUN 0 +#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_SPDIF_CTRL_WORD_LENGTH 0x00000010 +#define BM_SPDIF_CTRL_CLKGATE 0x40000000 +#define BM_SPDIF_CTRL_SFTRST 0x80000000 + +#define HW_SPDIF_STAT 0x10 + +#define HW_SPDIF_FRAMECTRL 0x20 + +#define HW_SPDIF_SRR 0x30 +#define BM_SPDIF_SRR_RATE 0x000FFFFF +#define BP_SPDIF_SRR_RATE 0 +#define BM_SPDIF_SRR_BASEMULT 0x70000000 +#define BP_SPDIF_SRR_BASEMULT 28 + +#define HW_SPDIF_DEBUG 0x40 + +#define HW_SPDIF_DATA 0x50 + +#define HW_SPDIF_VERSION 0x60 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h new file mode 100644 index 000000000000..28aacf0f58ed --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h @@ -0,0 +1,102 @@ +/* + * stmp378x: SSP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SSP1_BASE (STMP3XXX_REGS_BASE + 0x10000) +#define REGS_SSP1_PHYS 0x80010000 +#define REGS_SSP2_BASE (STMP3XXX_REGS_BASE + 0x34000) +#define REGS_SSP2_PHYS 0x80034000 +#define REGS_SSP_SIZE 0x2000 + +#define HW_SSP_CTRL0 0x0 +#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_SSP_CTRL0_XFER_COUNT 0 +#define BM_SSP_CTRL0_ENABLE 0x00010000 +#define BM_SSP_CTRL0_GET_RESP 0x00020000 +#define BM_SSP_CTRL0_LONG_RESP 0x00080000 +#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000 +#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000 +#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000 +#define BP_SSP_CTRL0_BUS_WIDTH 22 +#define BM_SSP_CTRL0_DATA_XFER 0x01000000 +#define BM_SSP_CTRL0_READ 0x02000000 +#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000 +#define BM_SSP_CTRL0_LOCK_CS 0x08000000 +#define BM_SSP_CTRL0_RUN 0x20000000 +#define BM_SSP_CTRL0_CLKGATE 0x40000000 +#define BM_SSP_CTRL0_SFTRST 0x80000000 + +#define HW_SSP_CMD0 0x10 +#define BM_SSP_CMD0_CMD 0x000000FF +#define BP_SSP_CMD0_CMD 0 +#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00 +#define BP_SSP_CMD0_BLOCK_COUNT 8 +#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000 +#define BP_SSP_CMD0_BLOCK_SIZE 16 +#define BM_SSP_CMD0_APPEND_8CYC 0x00100000 +#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF +#define BP_SSP_CMD1_CMD_ARG 0 + +#define HW_SSP_TIMING 0x50 +#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF +#define BP_SSP_TIMING_CLOCK_RATE 0 +#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00 +#define BP_SSP_TIMING_CLOCK_DIVIDE 8 +#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000 +#define BP_SSP_TIMING_TIMEOUT 16 + +#define HW_SSP_CTRL1 0x60 +#define BM_SSP_CTRL1_SSP_MODE 0x0000000F +#define BP_SSP_CTRL1_SSP_MODE 0 +#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0 +#define BP_SSP_CTRL1_WORD_LENGTH 4 +#define BM_SSP_CTRL1_POLARITY 0x00000200 +#define BM_SSP_CTRL1_PHASE 0x00000400 +#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000 +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000 +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000 +#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000 + +#define HW_SSP_DATA 0x70 + +#define HW_SSP_SDRESP0 0x80 + +#define HW_SSP_SDRESP1 0x90 + +#define HW_SSP_SDRESP2 0xA0 + +#define HW_SSP_SDRESP3 0xB0 + +#define HW_SSP_STATUS 0xC0 +#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020 +#define BM_SSP_STATUS_TIMEOUT 0x00001000 +#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000 +#define BM_SSP_STATUS_RESP_ERR 0x00008000 +#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000 +#define BM_SSP_STATUS_CARD_DETECT 0x10000000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h new file mode 100644 index 000000000000..08343a8b5566 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h @@ -0,0 +1,23 @@ +/* + * stmp378x: SYDMA register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SYDMA_BASE (STMP3XXX_REGS_BASE + 0x26000) +#define REGS_SYDMA_PHYS 0x80026000 +#define REGS_SYDMA_SIZE 0x2000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h new file mode 100644 index 000000000000..b5527957c67f --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h @@ -0,0 +1,68 @@ +/* + * stmp378x: TIMROT register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_TIMROT +#define _MACH_REGS_TIMROT + +#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000) +#define REGS_TIMROT_PHYS 0x80068000 +#define REGS_TIMROT_SIZE 0x2000 + +#define HW_TIMROT_ROTCTRL 0x0 +#define BM_TIMROT_ROTCTRL_SELECT_A 0x00000007 +#define BP_TIMROT_ROTCTRL_SELECT_A 0 +#define BM_TIMROT_ROTCTRL_SELECT_B 0x00000070 +#define BP_TIMROT_ROTCTRL_SELECT_B 4 +#define BM_TIMROT_ROTCTRL_POLARITY_A 0x00000100 +#define BM_TIMROT_ROTCTRL_POLARITY_B 0x00000200 +#define BM_TIMROT_ROTCTRL_OVERSAMPLE 0x00000C00 +#define BP_TIMROT_ROTCTRL_OVERSAMPLE 10 +#define BM_TIMROT_ROTCTRL_RELATIVE 0x00001000 +#define BM_TIMROT_ROTCTRL_DIVIDER 0x003F0000 +#define BP_TIMROT_ROTCTRL_DIVIDER 16 +#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT 0x20000000 +#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000 +#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000 + +#define HW_TIMROT_ROTCOUNT 0x10 +#define BM_TIMROT_ROTCOUNT_UPDOWN 0x0000FFFF +#define BP_TIMROT_ROTCOUNT_UPDOWN 0 + +#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20) +#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20) +#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20) + +#define HW_TIMROT_TIMCTRLn 0x20 +#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F +#define BP_TIMROT_TIMCTRLn_SELECT 0 +#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030 +#define BP_TIMROT_TIMCTRLn_PRESCALE 4 +#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040 +#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080 +#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000 +#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000 + +#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20) +#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20) +#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20) + +#define HW_TIMROT_TIMCOUNTn 0x30 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h new file mode 100644 index 000000000000..7f895cb34350 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h @@ -0,0 +1,67 @@ +/* + * stmp378x: TVENC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_TVENC_BASE (STMP3XXX_REGS_BASE + 0x38000) +#define REGS_TVENC_PHYS 0x80038000 +#define REGS_TVENC_SIZE 0x2000 + +#define HW_TVENC_CTRL 0x0 +#define BM_TVENC_CTRL_CLKGATE 0x40000000 +#define BM_TVENC_CTRL_SFTRST 0x80000000 + +#define HW_TVENC_CONFIG 0x10 +#define BM_TVENC_CONFIG_ENCD_MODE 0x00000007 +#define BP_TVENC_CONFIG_ENCD_MODE 0 +#define BM_TVENC_CONFIG_SYNC_MODE 0x00000070 +#define BP_TVENC_CONFIG_SYNC_MODE 4 +#define BM_TVENC_CONFIG_FSYNC_PHS 0x00000200 +#define BM_TVENC_CONFIG_CGAIN 0x0000C000 +#define BP_TVENC_CONFIG_CGAIN 14 +#define BM_TVENC_CONFIG_YGAIN_SEL 0x00030000 +#define BP_TVENC_CONFIG_YGAIN_SEL 16 +#define BM_TVENC_CONFIG_PAL_SHAPE 0x00100000 + +#define HW_TVENC_SYNCOFFSET 0x30 + +#define HW_TVENC_COLORSUB0 0xC0 + +#define HW_TVENC_COLORBURST 0x140 +#define BM_TVENC_COLORBURST_PBA 0x00FF0000 +#define BP_TVENC_COLORBURST_PBA 16 +#define BM_TVENC_COLORBURST_NBA 0xFF000000 +#define BP_TVENC_COLORBURST_NBA 24 + +#define HW_TVENC_MACROVISION0 0x150 + +#define HW_TVENC_MACROVISION1 0x160 + +#define HW_TVENC_MACROVISION2 0x170 + +#define HW_TVENC_MACROVISION3 0x180 + +#define HW_TVENC_MACROVISION4 0x190 + +#define HW_TVENC_DACCTRL 0x1A0 +#define BM_TVENC_DACCTRL_RVAL 0x00000070 +#define BP_TVENC_DACCTRL_RVAL 4 +#define BM_TVENC_DACCTRL_DUMP_TOVDD1 0x00000100 +#define BM_TVENC_DACCTRL_PWRUP1 0x00001000 +#define BM_TVENC_DACCTRL_GAINUP 0x00040000 +#define BM_TVENC_DACCTRL_GAINDN 0x00080000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h new file mode 100644 index 000000000000..a251e68bb3a1 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h @@ -0,0 +1,87 @@ +/* + * stmp378x: UARTAPP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_UARTAPP1_BASE (STMP3XXX_REGS_BASE + 0x6C000) +#define REGS_UARTAPP1_PHYS 0x8006C000 +#define REGS_UARTAPP2_BASE (STMP3XXX_REGS_BASE + 0x6E000) +#define REGS_UARTAPP2_PHYS 0x8006E000 +#define REGS_UARTAPP_SIZE 0x2000 + +#define HW_UARTAPP_CTRL0 0x0 +#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_UARTAPP_CTRL0_XFER_COUNT 0 +#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000 +#define BP_UARTAPP_CTRL0_RXTIMEOUT 16 +#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000 +#define BM_UARTAPP_CTRL0_RUN 0x20000000 +#define BM_UARTAPP_CTRL0_SFTRST 0x80000000 +#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF +#define BP_UARTAPP_CTRL1_XFER_COUNT 0 +#define BM_UARTAPP_CTRL1_RUN 0x10000000 + +#define HW_UARTAPP_CTRL2 0x20 +#define BM_UARTAPP_CTRL2_UARTEN 0x00000001 +#define BP_UARTAPP_CTRL2_UARTEN 0 +#define BM_UARTAPP_CTRL2_TXE 0x00000100 +#define BM_UARTAPP_CTRL2_RXE 0x00000200 +#define BM_UARTAPP_CTRL2_RTS 0x00000800 +#define BM_UARTAPP_CTRL2_RTSEN 0x00004000 +#define BM_UARTAPP_CTRL2_CTSEN 0x00008000 +#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000 +#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000 +#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000 + +#define HW_UARTAPP_LINECTRL 0x30 +#define BM_UARTAPP_LINECTRL_BRK 0x00000001 +#define BP_UARTAPP_LINECTRL_BRK 0 +#define BM_UARTAPP_LINECTRL_PEN 0x00000002 +#define BM_UARTAPP_LINECTRL_EPS 0x00000004 +#define BM_UARTAPP_LINECTRL_STP2 0x00000008 +#define BM_UARTAPP_LINECTRL_FEN 0x00000010 +#define BM_UARTAPP_LINECTRL_WLEN 0x00000060 +#define BP_UARTAPP_LINECTRL_WLEN 5 +#define BM_UARTAPP_LINECTRL_SPS 0x00000080 +#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00 +#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8 +#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000 +#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16 + +#define HW_UARTAPP_INTR 0x50 +#define BM_UARTAPP_INTR_CTSMIS 0x00000002 +#define BM_UARTAPP_INTR_RTIS 0x00000040 +#define BM_UARTAPP_INTR_CTSMIEN 0x00020000 +#define BM_UARTAPP_INTR_RXIEN 0x00100000 +#define BM_UARTAPP_INTR_RTIEN 0x00400000 + +#define HW_UARTAPP_DATA 0x60 + +#define HW_UARTAPP_STAT 0x70 +#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF +#define BP_UARTAPP_STAT_RXCOUNT 0 +#define BM_UARTAPP_STAT_FERR 0x00010000 +#define BM_UARTAPP_STAT_PERR 0x00020000 +#define BM_UARTAPP_STAT_BERR 0x00040000 +#define BM_UARTAPP_STAT_OERR 0x00080000 +#define BM_UARTAPP_STAT_RXFE 0x01000000 +#define BM_UARTAPP_STAT_TXFF 0x02000000 +#define BM_UARTAPP_STAT_TXFE 0x08000000 +#define BM_UARTAPP_STAT_CTS 0x10000000 + +#define HW_UARTAPP_VERSION 0x90 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h new file mode 100644 index 000000000000..b810deb552a9 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h @@ -0,0 +1,268 @@ +/* + * stmp378x: UARTDBG register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000) +#define REGS_UARTDBG_PHYS 0x80070000 +#define REGS_UARTDBG_SIZE 0x2000 + +#define HW_UARTDBGDR 0x00000000 +#define BP_UARTDBGDR_UNAVAILABLE 16 +#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGDR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE) +#define BP_UARTDBGDR_RESERVED 12 +#define BM_UARTDBGDR_RESERVED 0x0000F000 +#define BF_UARTDBGDR_RESERVED(v) \ + (((v) << 12) & BM_UARTDBGDR_RESERVED) +#define BM_UARTDBGDR_OE 0x00000800 +#define BM_UARTDBGDR_BE 0x00000400 +#define BM_UARTDBGDR_PE 0x00000200 +#define BM_UARTDBGDR_FE 0x00000100 +#define BP_UARTDBGDR_DATA 0 +#define BM_UARTDBGDR_DATA 0x000000FF +#define BF_UARTDBGDR_DATA(v) \ + (((v) << 0) & BM_UARTDBGDR_DATA) +#define HW_UARTDBGRSR_ECR 0x00000004 +#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8 +#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE) +#define BP_UARTDBGRSR_ECR_EC 4 +#define BM_UARTDBGRSR_ECR_EC 0x000000F0 +#define BF_UARTDBGRSR_ECR_EC(v) \ + (((v) << 4) & BM_UARTDBGRSR_ECR_EC) +#define BM_UARTDBGRSR_ECR_OE 0x00000008 +#define BM_UARTDBGRSR_ECR_BE 0x00000004 +#define BM_UARTDBGRSR_ECR_PE 0x00000002 +#define BM_UARTDBGRSR_ECR_FE 0x00000001 +#define HW_UARTDBGFR 0x00000018 +#define BP_UARTDBGFR_UNAVAILABLE 16 +#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGFR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE) +#define BP_UARTDBGFR_RESERVED 9 +#define BM_UARTDBGFR_RESERVED 0x0000FE00 +#define BF_UARTDBGFR_RESERVED(v) \ + (((v) << 9) & BM_UARTDBGFR_RESERVED) +#define BM_UARTDBGFR_RI 0x00000100 +#define BM_UARTDBGFR_TXFE 0x00000080 +#define BM_UARTDBGFR_RXFF 0x00000040 +#define BM_UARTDBGFR_TXFF 0x00000020 +#define BM_UARTDBGFR_RXFE 0x00000010 +#define BM_UARTDBGFR_BUSY 0x00000008 +#define BM_UARTDBGFR_DCD 0x00000004 +#define BM_UARTDBGFR_DSR 0x00000002 +#define BM_UARTDBGFR_CTS 0x00000001 +#define HW_UARTDBGILPR 0x00000020 +#define BP_UARTDBGILPR_UNAVAILABLE 8 +#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGILPR_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE) +#define BP_UARTDBGILPR_ILPDVSR 0 +#define BM_UARTDBGILPR_ILPDVSR 0x000000FF +#define BF_UARTDBGILPR_ILPDVSR(v) \ + (((v) << 0) & BM_UARTDBGILPR_ILPDVSR) +#define HW_UARTDBGIBRD 0x00000024 +#define BP_UARTDBGIBRD_UNAVAILABLE 16 +#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIBRD_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE) +#define BP_UARTDBGIBRD_BAUD_DIVINT 0 +#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF +#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \ + (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT) +#define HW_UARTDBGFBRD 0x00000028 +#define BP_UARTDBGFBRD_UNAVAILABLE 8 +#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGFBRD_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE) +#define BP_UARTDBGFBRD_RESERVED 6 +#define BM_UARTDBGFBRD_RESERVED 0x000000C0 +#define BF_UARTDBGFBRD_RESERVED(v) \ + (((v) << 6) & BM_UARTDBGFBRD_RESERVED) +#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0 +#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F +#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \ + (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC) +#define HW_UARTDBGLCR_H 0x0000002c +#define BP_UARTDBGLCR_H_UNAVAILABLE 16 +#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE) +#define BP_UARTDBGLCR_H_RESERVED 8 +#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00 +#define BF_UARTDBGLCR_H_RESERVED(v) \ + (((v) << 8) & BM_UARTDBGLCR_H_RESERVED) +#define BM_UARTDBGLCR_H_SPS 0x00000080 +#define BP_UARTDBGLCR_H_WLEN 5 +#define BM_UARTDBGLCR_H_WLEN 0x00000060 +#define BF_UARTDBGLCR_H_WLEN(v) \ + (((v) << 5) & BM_UARTDBGLCR_H_WLEN) +#define BM_UARTDBGLCR_H_FEN 0x00000010 +#define BM_UARTDBGLCR_H_STP2 0x00000008 +#define BM_UARTDBGLCR_H_EPS 0x00000004 +#define BM_UARTDBGLCR_H_PEN 0x00000002 +#define BM_UARTDBGLCR_H_BRK 0x00000001 +#define HW_UARTDBGCR 0x00000030 +#define BP_UARTDBGCR_UNAVAILABLE 16 +#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGCR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE) +#define BM_UARTDBGCR_CTSEN 0x00008000 +#define BM_UARTDBGCR_RTSEN 0x00004000 +#define BM_UARTDBGCR_OUT2 0x00002000 +#define BM_UARTDBGCR_OUT1 0x00001000 +#define BM_UARTDBGCR_RTS 0x00000800 +#define BM_UARTDBGCR_DTR 0x00000400 +#define BM_UARTDBGCR_RXE 0x00000200 +#define BM_UARTDBGCR_TXE 0x00000100 +#define BM_UARTDBGCR_LBE 0x00000080 +#define BP_UARTDBGCR_RESERVED 3 +#define BM_UARTDBGCR_RESERVED 0x00000078 +#define BF_UARTDBGCR_RESERVED(v) \ + (((v) << 3) & BM_UARTDBGCR_RESERVED) +#define BM_UARTDBGCR_SIRLP 0x00000004 +#define BM_UARTDBGCR_SIREN 0x00000002 +#define BM_UARTDBGCR_UARTEN 0x00000001 +#define HW_UARTDBGIFLS 0x00000034 +#define BP_UARTDBGIFLS_UNAVAILABLE 16 +#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIFLS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE) +#define BP_UARTDBGIFLS_RESERVED 6 +#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0 +#define BF_UARTDBGIFLS_RESERVED(v) \ + (((v) << 6) & BM_UARTDBGIFLS_RESERVED) +#define BP_UARTDBGIFLS_RXIFLSEL 3 +#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038 +#define BF_UARTDBGIFLS_RXIFLSEL(v) \ + (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL) +#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0 +#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1 +#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2 +#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3 +#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7 +#define BP_UARTDBGIFLS_TXIFLSEL 0 +#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007 +#define BF_UARTDBGIFLS_TXIFLSEL(v) \ + (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL) +#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0 +#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1 +#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2 +#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3 +#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7 +#define HW_UARTDBGIMSC 0x00000038 +#define BP_UARTDBGIMSC_UNAVAILABLE 16 +#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIMSC_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE) +#define BP_UARTDBGIMSC_RESERVED 11 +#define BM_UARTDBGIMSC_RESERVED 0x0000F800 +#define BF_UARTDBGIMSC_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGIMSC_RESERVED) +#define BM_UARTDBGIMSC_OEIM 0x00000400 +#define BM_UARTDBGIMSC_BEIM 0x00000200 +#define BM_UARTDBGIMSC_PEIM 0x00000100 +#define BM_UARTDBGIMSC_FEIM 0x00000080 +#define BM_UARTDBGIMSC_RTIM 0x00000040 +#define BM_UARTDBGIMSC_TXIM 0x00000020 +#define BM_UARTDBGIMSC_RXIM 0x00000010 +#define BM_UARTDBGIMSC_DSRMIM 0x00000008 +#define BM_UARTDBGIMSC_DCDMIM 0x00000004 +#define BM_UARTDBGIMSC_CTSMIM 0x00000002 +#define BM_UARTDBGIMSC_RIMIM 0x00000001 +#define HW_UARTDBGRIS 0x0000003c +#define BP_UARTDBGRIS_UNAVAILABLE 16 +#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGRIS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE) +#define BP_UARTDBGRIS_RESERVED 11 +#define BM_UARTDBGRIS_RESERVED 0x0000F800 +#define BF_UARTDBGRIS_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGRIS_RESERVED) +#define BM_UARTDBGRIS_OERIS 0x00000400 +#define BM_UARTDBGRIS_BERIS 0x00000200 +#define BM_UARTDBGRIS_PERIS 0x00000100 +#define BM_UARTDBGRIS_FERIS 0x00000080 +#define BM_UARTDBGRIS_RTRIS 0x00000040 +#define BM_UARTDBGRIS_TXRIS 0x00000020 +#define BM_UARTDBGRIS_RXRIS 0x00000010 +#define BM_UARTDBGRIS_DSRRMIS 0x00000008 +#define BM_UARTDBGRIS_DCDRMIS 0x00000004 +#define BM_UARTDBGRIS_CTSRMIS 0x00000002 +#define BM_UARTDBGRIS_RIRMIS 0x00000001 +#define HW_UARTDBGMIS 0x00000040 +#define BP_UARTDBGMIS_UNAVAILABLE 16 +#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGMIS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE) +#define BP_UARTDBGMIS_RESERVED 11 +#define BM_UARTDBGMIS_RESERVED 0x0000F800 +#define BF_UARTDBGMIS_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGMIS_RESERVED) +#define BM_UARTDBGMIS_OEMIS 0x00000400 +#define BM_UARTDBGMIS_BEMIS 0x00000200 +#define BM_UARTDBGMIS_PEMIS 0x00000100 +#define BM_UARTDBGMIS_FEMIS 0x00000080 +#define BM_UARTDBGMIS_RTMIS 0x00000040 +#define BM_UARTDBGMIS_TXMIS 0x00000020 +#define BM_UARTDBGMIS_RXMIS 0x00000010 +#define BM_UARTDBGMIS_DSRMMIS 0x00000008 +#define BM_UARTDBGMIS_DCDMMIS 0x00000004 +#define BM_UARTDBGMIS_CTSMMIS 0x00000002 +#define BM_UARTDBGMIS_RIMMIS 0x00000001 +#define HW_UARTDBGICR 0x00000044 +#define BP_UARTDBGICR_UNAVAILABLE 16 +#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGICR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE) +#define BP_UARTDBGICR_RESERVED 11 +#define BM_UARTDBGICR_RESERVED 0x0000F800 +#define BF_UARTDBGICR_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGICR_RESERVED) +#define BM_UARTDBGICR_OEIC 0x00000400 +#define BM_UARTDBGICR_BEIC 0x00000200 +#define BM_UARTDBGICR_PEIC 0x00000100 +#define BM_UARTDBGICR_FEIC 0x00000080 +#define BM_UARTDBGICR_RTIC 0x00000040 +#define BM_UARTDBGICR_TXIC 0x00000020 +#define BM_UARTDBGICR_RXIC 0x00000010 +#define BM_UARTDBGICR_DSRMIC 0x00000008 +#define BM_UARTDBGICR_DCDMIC 0x00000004 +#define BM_UARTDBGICR_CTSMIC 0x00000002 +#define BM_UARTDBGICR_RIMIC 0x00000001 +#define HW_UARTDBGDMACR 0x00000048 +#define BP_UARTDBGDMACR_UNAVAILABLE 16 +#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGDMACR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE) +#define BP_UARTDBGDMACR_RESERVED 3 +#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8 +#define BF_UARTDBGDMACR_RESERVED(v) \ + (((v) << 3) & BM_UARTDBGDMACR_RESERVED) +#define BM_UARTDBGDMACR_DMAONERR 0x00000004 +#define BM_UARTDBGDMACR_TXDMAE 0x00000002 +#define BM_UARTDBGDMACR_RXDMAE 0x00000001 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h new file mode 100644 index 000000000000..25112c1aa608 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h @@ -0,0 +1,40 @@ +/* + * stmp378x: USBCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000) +#define REGS_USBCTRL_PHYS 0x80080000 +#define REGS_USBCTRL_SIZE 0x2000 + +#define HW_USBCTRL_USBCMD 0x140 +#define BM_USBCTRL_USBCMD_RS 0x00000001 +#define BP_USBCTRL_USBCMD_RS 0 +#define BM_USBCTRL_USBCMD_RST 0x00000002 + +#define HW_USBCTRL_USBINTR 0x148 +#define BM_USBCTRL_USBINTR_UE 0x00000001 +#define BP_USBCTRL_USBINTR_UE 0 + +#define HW_USBCTRL_PORTSC1 0x184 +#define BM_USBCTRL_PORTSC1_PHCD 0x00800000 + +#define HW_USBCTRL_OTGSC 0x1A4 +#define BM_USBCTRL_OTGSC_ID 0x00000100 +#define BM_USBCTRL_OTGSC_IDIS 0x00010000 +#define BM_USBCTRL_OTGSC_IDIE 0x01000000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h new file mode 100644 index 000000000000..11f3b732dc92 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h @@ -0,0 +1,37 @@ +/* + * stmp378x: USBPHY register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000) +#define REGS_USBPHY_PHYS 0x8007C000 +#define REGS_USBPHY_SIZE 0x2000 + +#define HW_USBPHY_PWD 0x0 + +#define HW_USBPHY_CTRL 0x30 +#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002 +#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010 +#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080 +#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800 +#define BM_USBPHY_CTRL_CLKGATE 0x40000000 +#define BM_USBPHY_CTRL_SFTRST 0x80000000 + +#define HW_USBPHY_STATUS 0x40 +#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040 +#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100 diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c new file mode 100644 index 000000000000..ddd49a760fd4 --- /dev/null +++ b/arch/arm/mach-stmp378x/stmp378x.c @@ -0,0 +1,299 @@ +/* + * Freescale STMP378X platform support + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/dma-mapping.h> + +#include <asm/dma.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include <mach/pins.h> +#include <mach/pinmux.h> +#include <mach/dma.h> +#include <mach/hardware.h> +#include <mach/system.h> +#include <mach/platform.h> +#include <mach/stmp3xxx.h> +#include <mach/regs-icoll.h> +#include <mach/regs-apbh.h> +#include <mach/regs-apbx.h> +#include <mach/regs-pxp.h> +#include <mach/regs-i2c.h> + +#include "stmp378x.h" +/* + * IRQ handling + */ +static void stmp378x_ack_irq(unsigned int irq) +{ + /* Tell ICOLL to release IRQ line */ + __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR); + + /* ACK current interrupt */ + __raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */, + REGS_ICOLL_BASE + HW_ICOLL_LEVELACK); + + /* Barrier */ + (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT); +} + +static void stmp378x_mask_irq(unsigned int irq) +{ + /* IRQ disable */ + stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE, + REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10); +} + +static void stmp378x_unmask_irq(unsigned int irq) +{ + /* IRQ enable */ + stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE, + REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10); +} + +static struct irq_chip stmp378x_chip = { + .ack = stmp378x_ack_irq, + .mask = stmp378x_mask_irq, + .unmask = stmp378x_unmask_irq, +}; + +void __init stmp378x_init_irq(void) +{ + stmp3xxx_init_irq(&stmp378x_chip); +} + +/* + * DMA interrupt handling + */ +void stmp3xxx_arch_dma_enable_interrupt(int channel) +{ + void __iomem *c1, *c2; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c1 = REGS_APBH_BASE + HW_APBH_CTRL1; + c2 = REGS_APBH_BASE + HW_APBH_CTRL2; + break; + + case STMP3XXX_BUS_APBX: + c1 = REGS_APBX_BASE + HW_APBX_CTRL1; + c2 = REGS_APBX_BASE + HW_APBX_CTRL2; + break; + + default: + return; + } + stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1); + stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2); +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt); + +void stmp3xxx_arch_dma_clear_interrupt(int channel) +{ + void __iomem *c1, *c2; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c1 = REGS_APBH_BASE + HW_APBH_CTRL1; + c2 = REGS_APBH_BASE + HW_APBH_CTRL2; + break; + + case STMP3XXX_BUS_APBX: + c1 = REGS_APBX_BASE + HW_APBX_CTRL1; + c2 = REGS_APBX_BASE + HW_APBX_CTRL2; + break; + + default: + return; + } + stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1); + stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2); +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt); + +int stmp3xxx_arch_dma_is_interrupt(int channel) +{ + int r = 0; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) & + (1 << STMP3XXX_DMA_CHANNEL(channel)); + break; + + case STMP3XXX_BUS_APBX: + r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) & + (1 << STMP3XXX_DMA_CHANNEL(channel)); + break; + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt); + +void stmp3xxx_arch_dma_reset_channel(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + void __iomem *c0; + u32 mask; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c0 = REGS_APBH_BASE + HW_APBH_CTRL0; + mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL; + break; + case STMP3XXX_BUS_APBX: + c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL; + mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL; + break; + default: + return; + } + + /* Reset channel and wait for it to complete */ + stmp3xxx_setl(mask, c0); + while (__raw_readl(c0) & mask) + cpu_relax(); +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel); + +void stmp3xxx_arch_dma_freeze(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + u32 mask = 1 << chbit; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + case STMP3XXX_BUS_APBX: + stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze); + +void stmp3xxx_arch_dma_unfreeze(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + u32 mask = 1 << chbit; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + case STMP3XXX_BUS_APBX: + stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze); + +/* + * The registers are all very closely mapped, so we might as well map them all + * with a single mapping + * + * Logical Physical + * f0000000 80000000 On-chip registers + * f1000000 00000000 32k on-chip SRAM + */ + +static struct map_desc stmp378x_io_desc[] __initdata = { + { + .virtual = (u32)STMP3XXX_REGS_BASE, + .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE), + .length = STMP3XXX_REGS_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = (u32)STMP3XXX_OCRAM_BASE, + .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE), + .length = STMP3XXX_OCRAM_SIZE, + .type = MT_DEVICE, + }, +}; + + +static u64 common_dmamask = DMA_BIT_MASK(32); + +/* + * devices that are present only on stmp378x, not on all 3xxx boards: + * PxP + * I2C + */ +static struct resource pxp_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = REGS_PXP_PHYS, + .end = REGS_PXP_PHYS + REGS_PXP_SIZE, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_PXP, + .end = IRQ_PXP, + }, +}; + +struct platform_device stmp378x_pxp = { + .name = "stmp3xxx-pxp", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(pxp_resource), + .resource = pxp_resource, +}; + +static struct resource i2c_resources[] = { + { + .flags = IORESOURCE_IRQ, + .start = IRQ_I2C_ERROR, + .end = IRQ_I2C_ERROR, + }, { + .flags = IORESOURCE_MEM, + .start = REGS_I2C_PHYS, + .end = REGS_I2C_PHYS + REGS_I2C_SIZE, + }, { + .flags = IORESOURCE_DMA, + .start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX), + .end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX), + }, +}; + +struct platform_device stmp378x_i2c = { + .name = "i2c_stmp3xxx", + .id = 0, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = i2c_resources, + .num_resources = ARRAY_SIZE(i2c_resources), +}; + +void __init stmp378x_map_io(void) +{ + iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc)); +} diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h new file mode 100644 index 000000000000..0dc15b3c891f --- /dev/null +++ b/arch/arm/mach-stmp378x/stmp378x.h @@ -0,0 +1,25 @@ +/* + * Freescale STMP37XX/STMP378X internal functions and data declarations + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __MACH_STMP378X_H +#define __MACH_STMP378X_H + +void stmp378x_map_io(void); +void stmp378x_init_irq(void); + +extern struct platform_device stmp378x_pxp, stmp378x_i2c; +#endif /* __MACH_STMP378X_COMMON_H */ diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c new file mode 100644 index 000000000000..90d8fe6f10fe --- /dev/null +++ b/arch/arm/mach-stmp378x/stmp378x_devb.c @@ -0,0 +1,334 @@ +/* + * Freescale STMP378X development board support + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/spi/spi.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pins.h> +#include <mach/pinmux.h> +#include <mach/platform.h> +#include <mach/stmp3xxx.h> +#include <mach/mmc.h> +#include <mach/gpmi.h> + +#include "stmp378x.h" + +static struct platform_device *devices[] = { + &stmp3xxx_dbguart, + &stmp3xxx_appuart, + &stmp3xxx_watchdog, + &stmp3xxx_touchscreen, + &stmp3xxx_rtc, + &stmp3xxx_keyboard, + &stmp3xxx_framebuffer, + &stmp3xxx_backlight, + &stmp3xxx_rotdec, + &stmp3xxx_persistent, + &stmp3xxx_dcp_bootstream, + &stmp3xxx_dcp, + &stmp3xxx_battery, + &stmp378x_pxp, + &stmp378x_i2c, +}; + +static struct pin_desc i2c_pins_desc[] = { + { PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, +}; + +static struct pin_group i2c_pins = { + .pins = i2c_pins_desc, + .nr_pins = ARRAY_SIZE(i2c_pins_desc), +}; + +static struct pin_desc dbguart_pins_0[] = { + { PINID_PWM0, PIN_FUN3, }, + { PINID_PWM1, PIN_FUN3, }, +}; + +static struct pin_group dbguart_pins[] = { + [0] = { + .pins = dbguart_pins_0, + .nr_pins = ARRAY_SIZE(dbguart_pins_0), + }, +}; + +static int dbguart_pins_control(int id, int request) +{ + int r = 0; + + if (request) + r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart"); + else + stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart"); + return r; +} + +static struct pin_desc appuart_pins_0[] = { + { PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, +}; + +static struct pin_desc appuart_pins_1[] = { +#if 0 /* enable these when second appuart will be connected */ + { PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, +#endif +}; + +static struct pin_desc mmc_pins_desc[] = { + { PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 }, + { PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 }, +}; + +static struct pin_group mmc_pins = { + .pins = mmc_pins_desc, + .nr_pins = ARRAY_SIZE(mmc_pins_desc), +}; + +static int stmp3xxxmmc_get_wp(void) +{ + return gpio_get_value(PINID_PWM4); +} + +static int stmp3xxxmmc_hw_init_ssp1(void) +{ + int ret; + + ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc"); + if (ret) + goto out; + + /* Configure write protect GPIO pin */ + ret = gpio_request(PINID_PWM4, "mmc wp"); + if (ret) + goto out_wp; + + gpio_direction_input(PINID_PWM4); + + /* Configure POWER pin as gpio to drive power to MMC slot */ + ret = gpio_request(PINID_PWM3, "mmc power"); + if (ret) + goto out_power; + + gpio_direction_output(PINID_PWM3, 0); + mdelay(100); + + return 0; + +out_power: + gpio_free(PINID_PWM4); +out_wp: + stmp3xxx_release_pin_group(&mmc_pins, "mmc"); +out: + return ret; +} + +static void stmp3xxxmmc_hw_release_ssp1(void) +{ + gpio_free(PINID_PWM3); + gpio_free(PINID_PWM4); + stmp3xxx_release_pin_group(&mmc_pins, "mmc"); +} + +static void stmp3xxxmmc_cmd_pullup_ssp1(int enable) +{ + stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc"); +} + +static unsigned long +stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz) +{ + struct clk *ssp, *parent; + char *p; + long r; + + ssp = clk_get(NULL, "ssp"); + + /* using SSP1, no timeout, clock rate 1 */ + writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) | + BF(0xFFFF, SSP_TIMING_TIMEOUT), + base + HW_SSP_TIMING); + + p = (hz > 1000000) ? "io" : "osc_24M"; + parent = clk_get(NULL, p); + clk_set_parent(ssp, parent); + r = clk_set_rate(ssp, 2 * hz / 1000); + clk_put(parent); + clk_put(ssp); + + return hz; +} + +static struct stmp3xxxmmc_platform_data mmc_data = { + .hw_init = stmp3xxxmmc_hw_init_ssp1, + .hw_release = stmp3xxxmmc_hw_release_ssp1, + .get_wp = stmp3xxxmmc_get_wp, + .cmd_pullup = stmp3xxxmmc_cmd_pullup_ssp1, + .setclock = stmp3xxxmmc_setclock_ssp1, +}; + + +static struct pin_group appuart_pins[] = { + [0] = { + .pins = appuart_pins_0, + .nr_pins = ARRAY_SIZE(appuart_pins_0), + }, + [1] = { + .pins = appuart_pins_1, + .nr_pins = ARRAY_SIZE(appuart_pins_1), + }, +}; + +static struct pin_desc ssp1_pins_desc[] = { + { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0, }, + { PINID_SSP1_CMD, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, }, + { PINID_SSP1_DATA0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, }, + { PINID_SSP1_DATA3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, }, +}; + +static struct pin_desc ssp2_pins_desc[] = { + { PINID_GPMI_WRN, PIN_FUN3, PIN_8MA, PIN_3_3V, 0, }, + { PINID_GPMI_RDY1, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, }, + { PINID_GPMI_D00, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, }, + { PINID_GPMI_D03, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, }, +}; + +static struct pin_group ssp1_pins = { + .pins = ssp1_pins_desc, + .nr_pins = ARRAY_SIZE(ssp1_pins_desc), +}; + +static struct pin_group ssp2_pins = { + .pins = ssp1_pins_desc, + .nr_pins = ARRAY_SIZE(ssp2_pins_desc), +}; + +static struct pin_desc gpmi_pins_desc[] = { + { PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 }, +}; + +static struct pin_group gpmi_pins = { + .pins = gpmi_pins_desc, + .nr_pins = ARRAY_SIZE(gpmi_pins_desc), +}; + +static struct mtd_partition gpmi_partitions[] = { + [0] = { + .name = "boot", + .size = 10 * SZ_1M, + .offset = 0, + }, + [1] = { + .name = "data", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct gpmi_platform_data gpmi_data = { + .pins = &gpmi_pins, + .nr_parts = ARRAY_SIZE(gpmi_partitions), + .parts = gpmi_partitions, + .part_types = { "cmdline", NULL }, +}; + +static struct spi_board_info spi_board_info[] __initdata = { +#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) + { + .modalias = "enc28j60", + .max_speed_hz = 6 * 1000 * 1000, + .bus_num = 1, + .chip_select = 0, + .platform_data = NULL, + }, +#endif +}; + +static void __init stmp378x_devb_init(void) +{ + stmp3xxx_pinmux_init(NR_REAL_IRQS); + + /* init stmp3xxx platform */ + stmp3xxx_init(); + + stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control; + stmp3xxx_appuart.dev.platform_data = appuart_pins; + stmp3xxx_mmc.dev.platform_data = &mmc_data; + stmp3xxx_gpmi.dev.platform_data = &gpmi_data; + stmp3xxx_spi1.dev.platform_data = &ssp1_pins; + stmp3xxx_spi2.dev.platform_data = &ssp2_pins; + stmp378x_i2c.dev.platform_data = &i2c_pins; + + /* register spi devices */ + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + /* add board's devices */ + platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* add devices selected by command line ssp1= and ssp2= options */ + stmp3xxx_ssp1_device_register(); + stmp3xxx_ssp2_device_register(); +} + +MACHINE_START(STMP378X, "STMP378X") + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = stmp378x_map_io, + .init_irq = stmp378x_init_irq, + .timer = &stmp3xxx_timer, + .init_machine = stmp378x_devb_init, +MACHINE_END diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile new file mode 100644 index 000000000000..57deffd09fbf --- /dev/null +++ b/arch/arm/mach-stmp37xx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o +obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot new file mode 100644 index 000000000000..1568ad404d59 --- /dev/null +++ b/arch/arm/mach-stmp37xx/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x40008000 +params_phys-y := 0x40000100 +initrd_phys-y := 0x40800000 diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S new file mode 100644 index 000000000000..fed2787b6c34 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S @@ -0,0 +1,37 @@ +/* + * Low-level IRQ helper macros for Freescale STMP37XX + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \base, #0xf0000000 @ vm address of IRQ controller + ldr \irqnr, [\base, #0x30] @ HW_ICOLL_STAT + cmp \irqnr, #0x3f + movne \irqstat, #0 @ Ack this IRQ + strne \irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR + moveqs \irqnr, #0 @ Zero flag set for no IRQ + + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h new file mode 100644 index 000000000000..98f12938550d --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/irqs.h @@ -0,0 +1,99 @@ +/* + * Freescale STMP37XX interrupts + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef _ASM_ARCH_IRQS_H +#define _ASM_ARCH_IRQS_H + +#define IRQ_DEBUG_UART 0 +#define IRQ_COMMS_RX 1 +#define IRQ_COMMS_TX 1 +#define IRQ_SSP2_ERROR 2 +#define IRQ_VDD5V 3 +#define IRQ_HEADPHONE_SHORT 4 +#define IRQ_DAC_DMA 5 +#define IRQ_DAC_ERROR 6 +#define IRQ_ADC_DMA 7 +#define IRQ_ADC_ERROR 8 +#define IRQ_SPDIF_DMA 9 +#define IRQ_SAIF2_DMA 9 +#define IRQ_SPDIF_ERROR 10 +#define IRQ_SAIF1_IRQ 10 +#define IRQ_SAIF2_IRQ 10 +#define IRQ_USB_CTRL 11 +#define IRQ_USB_WAKEUP 12 +#define IRQ_GPMI_DMA 13 +#define IRQ_SSP1_DMA 14 +#define IRQ_SSP_ERROR 15 +#define IRQ_GPIO0 16 +#define IRQ_GPIO1 17 +#define IRQ_GPIO2 18 +#define IRQ_SAIF1_DMA 19 +#define IRQ_SSP2_DMA 20 +#define IRQ_ECC8_IRQ 21 +#define IRQ_RTC_ALARM 22 +#define IRQ_UARTAPP_TX_DMA 23 +#define IRQ_UARTAPP_INTERNAL 24 +#define IRQ_UARTAPP_RX_DMA 25 +#define IRQ_I2C_DMA 26 +#define IRQ_I2C_ERROR 27 +#define IRQ_TIMER0 28 +#define IRQ_TIMER1 29 +#define IRQ_TIMER2 30 +#define IRQ_TIMER3 31 +#define IRQ_BATT_BRNOUT 32 +#define IRQ_VDDD_BRNOUT 33 +#define IRQ_VDDIO_BRNOUT 34 +#define IRQ_VDD18_BRNOUT 35 +#define IRQ_TOUCH_DETECT 36 +#define IRQ_LRADC_CH0 37 +#define IRQ_LRADC_CH1 38 +#define IRQ_LRADC_CH2 39 +#define IRQ_LRADC_CH3 40 +#define IRQ_LRADC_CH4 41 +#define IRQ_LRADC_CH5 42 +#define IRQ_LRADC_CH6 43 +#define IRQ_LRADC_CH7 44 +#define IRQ_LCDIF_DMA 45 +#define IRQ_LCDIF_ERROR 46 +#define IRQ_DIGCTL_DEBUG_TRAP 47 +#define IRQ_RTC_1MSEC 48 +#define IRQ_DRI_DMA 49 +#define IRQ_DRI_ATTENTION 50 +#define IRQ_GPMI_ATTENTION 51 +#define IRQ_IR 52 +#define IRQ_DCP_VMI 53 +#define IRQ_DCP 54 +#define IRQ_RESERVED_55 55 +#define IRQ_RESERVED_56 56 +#define IRQ_RESERVED_57 57 +#define IRQ_RESERVED_58 58 +#define IRQ_RESERVED_59 59 +#define SW_IRQ_60 60 +#define SW_IRQ_61 61 +#define SW_IRQ_62 62 +#define SW_IRQ_63 63 + +#define NR_REAL_IRQS 64 +#define NR_IRQS (NR_REAL_IRQS + 32 * 3) + +/* TIMER and BRNOUT are FIQ capable */ +#define FIQ_START IRQ_TIMER0 + +/* Hard disk IRQ is a GPMI attention IRQ */ +#define IRQ_HARDDISK IRQ_GPMI_ATTENTION + +#endif /* _ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h new file mode 100644 index 000000000000..d56de0c471d8 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/pins.h @@ -0,0 +1,147 @@ +/* + * Freescale STMP37XX SoC pin multiplexing + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_PINS_H +#define __ASM_ARCH_PINS_H + +/* + * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware + * interface this pin belongs to. + */ + +/* Bank 0 */ +#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0) +#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1) +#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2) +#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3) +#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4) +#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5) +#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6) +#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7) +#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8) +#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9) +#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10) +#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11) +#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12) +#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13) +#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14) +#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15) +#define PINID_GPMI_A0 STMP3XXX_PINID(0, 16) +#define PINID_GPMI_A1 STMP3XXX_PINID(0, 17) +#define PINID_GPMI_A2 STMP3XXX_PINID(0, 18) +#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19) +#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 20) +#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 21) +#define PINID_GPMI_RESETN STMP3XXX_PINID(0, 22) +#define PINID_GPMI_IRQ STMP3XXX_PINID(0, 23) +#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24) +#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25) +#define PINID_UART2_CTS STMP3XXX_PINID(0, 26) +#define PINID_UART2_RTS STMP3XXX_PINID(0, 27) +#define PINID_UART2_RX STMP3XXX_PINID(0, 28) +#define PINID_UART2_TX STMP3XXX_PINID(0, 29) + +/* Bank 1 */ +#define PINID_LCD_D00 STMP3XXX_PINID(1, 0) +#define PINID_LCD_D01 STMP3XXX_PINID(1, 1) +#define PINID_LCD_D02 STMP3XXX_PINID(1, 2) +#define PINID_LCD_D03 STMP3XXX_PINID(1, 3) +#define PINID_LCD_D04 STMP3XXX_PINID(1, 4) +#define PINID_LCD_D05 STMP3XXX_PINID(1, 5) +#define PINID_LCD_D06 STMP3XXX_PINID(1, 6) +#define PINID_LCD_D07 STMP3XXX_PINID(1, 7) +#define PINID_LCD_D08 STMP3XXX_PINID(1, 8) +#define PINID_LCD_D09 STMP3XXX_PINID(1, 9) +#define PINID_LCD_D10 STMP3XXX_PINID(1, 10) +#define PINID_LCD_D11 STMP3XXX_PINID(1, 11) +#define PINID_LCD_D12 STMP3XXX_PINID(1, 12) +#define PINID_LCD_D13 STMP3XXX_PINID(1, 13) +#define PINID_LCD_D14 STMP3XXX_PINID(1, 14) +#define PINID_LCD_D15 STMP3XXX_PINID(1, 15) +#define PINID_LCD_RESET STMP3XXX_PINID(1, 16) +#define PINID_LCD_RS STMP3XXX_PINID(1, 17) +#define PINID_LCD_WR_RWN STMP3XXX_PINID(1, 18) +#define PINID_LCD_RD_E STMP3XXX_PINID(1, 19) +#define PINID_LCD_CS STMP3XXX_PINID(1, 20) +#define PINID_LCD_BUSY STMP3XXX_PINID(1, 21) +#define PINID_SSP1_CMD STMP3XXX_PINID(1, 22) +#define PINID_SSP1_SCK STMP3XXX_PINID(1, 23) +#define PINID_SSP1_DATA0 STMP3XXX_PINID(1, 24) +#define PINID_SSP1_DATA1 STMP3XXX_PINID(1, 25) +#define PINID_SSP1_DATA2 STMP3XXX_PINID(1, 26) +#define PINID_SSP1_DATA3 STMP3XXX_PINID(1, 27) +#define PINID_SSP1_DETECT STMP3XXX_PINID(1, 28) + +/* Bank 2 */ +#define PINID_PWM0 STMP3XXX_PINID(2, 0) +#define PINID_PWM1 STMP3XXX_PINID(2, 1) +#define PINID_PWM2 STMP3XXX_PINID(2, 2) +#define PINID_PWM3 STMP3XXX_PINID(2, 3) +#define PINID_PWM4 STMP3XXX_PINID(2, 4) +#define PINID_I2C_SCL STMP3XXX_PINID(2, 5) +#define PINID_I2C_SDA STMP3XXX_PINID(2, 6) +#define PINID_ROTTARYA STMP3XXX_PINID(2, 7) +#define PINID_ROTTARYB STMP3XXX_PINID(2, 8) +#define PINID_EMI_CKE STMP3XXX_PINID(2, 9) +#define PINID_EMI_RASN STMP3XXX_PINID(2, 10) +#define PINID_EMI_CASN STMP3XXX_PINID(2, 11) +#define PINID_EMI_CE0N STMP3XXX_PINID(2, 12) +#define PINID_EMI_CE1N STMP3XXX_PINID(2, 13) +#define PINID_EMI_CE2N STMP3XXX_PINID(2, 14) +#define PINID_EMI_CE3N STMP3XXX_PINID(2, 15) +#define PINID_EMI_A00 STMP3XXX_PINID(2, 16) +#define PINID_EMI_A01 STMP3XXX_PINID(2, 17) +#define PINID_EMI_A02 STMP3XXX_PINID(2, 18) +#define PINID_EMI_A03 STMP3XXX_PINID(2, 19) +#define PINID_EMI_A04 STMP3XXX_PINID(2, 20) +#define PINID_EMI_A05 STMP3XXX_PINID(2, 21) +#define PINID_EMI_A06 STMP3XXX_PINID(2, 22) +#define PINID_EMI_A07 STMP3XXX_PINID(2, 23) +#define PINID_EMI_A08 STMP3XXX_PINID(2, 24) +#define PINID_EMI_A09 STMP3XXX_PINID(2, 25) +#define PINID_EMI_A10 STMP3XXX_PINID(2, 26) +#define PINID_EMI_A11 STMP3XXX_PINID(2, 27) +#define PINID_EMI_A12 STMP3XXX_PINID(2, 28) +#define PINID_EMI_A13 STMP3XXX_PINID(2, 29) +#define PINID_EMI_A14 STMP3XXX_PINID(2, 30) +#define PINID_EMI_WEN STMP3XXX_PINID(2, 31) + +/* Bank 3 */ +#define PINID_EMI_D00 STMP3XXX_PINID(3, 0) +#define PINID_EMI_D01 STMP3XXX_PINID(3, 1) +#define PINID_EMI_D02 STMP3XXX_PINID(3, 2) +#define PINID_EMI_D03 STMP3XXX_PINID(3, 3) +#define PINID_EMI_D04 STMP3XXX_PINID(3, 4) +#define PINID_EMI_D05 STMP3XXX_PINID(3, 5) +#define PINID_EMI_D06 STMP3XXX_PINID(3, 6) +#define PINID_EMI_D07 STMP3XXX_PINID(3, 7) +#define PINID_EMI_D08 STMP3XXX_PINID(3, 8) +#define PINID_EMI_D09 STMP3XXX_PINID(3, 9) +#define PINID_EMI_D10 STMP3XXX_PINID(3, 10) +#define PINID_EMI_D11 STMP3XXX_PINID(3, 11) +#define PINID_EMI_D12 STMP3XXX_PINID(3, 12) +#define PINID_EMI_D13 STMP3XXX_PINID(3, 13) +#define PINID_EMI_D14 STMP3XXX_PINID(3, 14) +#define PINID_EMI_D15 STMP3XXX_PINID(3, 15) +#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 16) +#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 17) +#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 18) +#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 19) +#define PINID_EMI_CLK STMP3XXX_PINID(3, 20) +#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21) + +#endif /* __ASM_ARCH_PINS_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h new file mode 100644 index 000000000000..a323aa9a21f2 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h @@ -0,0 +1,97 @@ +/* + * stmp37xx: APBH register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_APBH +#define _MACH_REGS_APBH + +#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000) + +#define HW_APBH_CTRL0 0x0 +#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BP_APBH_CTRL0_RESET_CHANNEL 16 +#define BM_APBH_CTRL0_CLKGATE 0x40000000 +#define BM_APBH_CTRL0_SFTRST 0x80000000 + +#define HW_APBH_CTRL1 0x10 +#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001 +#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0 + +#define HW_APBH_DEVSEL 0x20 + +#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70) +#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70) +#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70) +#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70) +#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70) +#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70) +#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70) +#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70) +#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70) +#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70) +#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70) +#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70) +#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70) +#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70) +#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70) +#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70) + +#define HW_APBH_CHn_NXTCMDAR 0x50 + +#define BM_APBH_CHn_CMD_MODE 0x00000003 +#define BP_APBH_CHn_CMD_MODE 0x00000001 +#define BV_APBH_CHn_CMD_MODE_NOOP 0 +#define BV_APBH_CHn_CMD_MODE_WRITE 1 +#define BV_APBH_CHn_CMD_MODE_READ 2 +#define BV_APBH_CHn_CMD_MODE_SENSE 3 +#define BM_APBH_CHn_CMD_CHAIN 0x00000004 +#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010 +#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020 +#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBH_CHn_CMD_CMDWORDS 12 +#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBH_CHn_CMD_XFER_COUNT 16 + +#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70) +#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70) +#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70) +#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70) +#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70) +#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70) +#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70) +#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70) +#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70) +#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70) +#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70) +#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70) +#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70) +#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70) +#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70) +#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70) + +#define HW_APBH_CHn_SEMA 0x80 +#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000 +#define BP_APBH_CHn_SEMA_PHORE 16 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h new file mode 100644 index 000000000000..6d080cd5b702 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h @@ -0,0 +1,113 @@ +/* + * stmp37xx: APBX register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_APBX +#define _MACH_REGS_APBX + +#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000) + +#define HW_APBX_CTRL0 0x0 +#define BM_APBX_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BP_APBX_CTRL0_RESET_CHANNEL 16 +#define BM_APBX_CTRL0_CLKGATE 0x40000000 +#define BM_APBX_CTRL0_SFTRST 0x80000000 + +#define HW_APBX_CTRL1 0x10 + +#define HW_APBX_DEVSEL 0x20 + +#define HW_APBX_CH0_NXTCMDAR (0x50 + 0 * 0x70) +#define HW_APBX_CH1_NXTCMDAR (0x50 + 1 * 0x70) +#define HW_APBX_CH2_NXTCMDAR (0x50 + 2 * 0x70) +#define HW_APBX_CH3_NXTCMDAR (0x50 + 3 * 0x70) +#define HW_APBX_CH4_NXTCMDAR (0x50 + 4 * 0x70) +#define HW_APBX_CH5_NXTCMDAR (0x50 + 5 * 0x70) +#define HW_APBX_CH6_NXTCMDAR (0x50 + 6 * 0x70) +#define HW_APBX_CH7_NXTCMDAR (0x50 + 7 * 0x70) +#define HW_APBX_CH8_NXTCMDAR (0x50 + 8 * 0x70) +#define HW_APBX_CH9_NXTCMDAR (0x50 + 9 * 0x70) +#define HW_APBX_CH10_NXTCMDAR (0x50 + 10 * 0x70) +#define HW_APBX_CH11_NXTCMDAR (0x50 + 11 * 0x70) +#define HW_APBX_CH12_NXTCMDAR (0x50 + 12 * 0x70) +#define HW_APBX_CH13_NXTCMDAR (0x50 + 13 * 0x70) +#define HW_APBX_CH14_NXTCMDAR (0x50 + 14 * 0x70) +#define HW_APBX_CH15_NXTCMDAR (0x50 + 15 * 0x70) + +#define HW_APBX_CHn_NXTCMDAR 0x50 +#define BM_APBX_CHn_CMD_MODE 0x00000003 +#define BP_APBX_CHn_CMD_MODE 0x00000001 +#define BV_APBX_CHn_CMD_MODE_NOOP 0 +#define BV_APBX_CHn_CMD_MODE_WRITE 1 +#define BV_APBX_CHn_CMD_MODE_READ 2 +#define BV_APBX_CHn_CMD_MODE_SENSE 3 +#define BM_APBX_CHn_CMD_COMMAND 0x00000003 +#define BP_APBX_CHn_CMD_COMMAND 0 +#define BM_APBX_CHn_CMD_CHAIN 0x00000004 +#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBX_CHn_CMD_CMDWORDS 12 +#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBX_CHn_CMD_XFER_COUNT 16 + +#define HW_APBX_CH0_BAR (0x70 + 0 * 0x70) +#define HW_APBX_CH1_BAR (0x70 + 1 * 0x70) +#define HW_APBX_CH2_BAR (0x70 + 2 * 0x70) +#define HW_APBX_CH3_BAR (0x70 + 3 * 0x70) +#define HW_APBX_CH4_BAR (0x70 + 4 * 0x70) +#define HW_APBX_CH5_BAR (0x70 + 5 * 0x70) +#define HW_APBX_CH6_BAR (0x70 + 6 * 0x70) +#define HW_APBX_CH7_BAR (0x70 + 7 * 0x70) +#define HW_APBX_CH8_BAR (0x70 + 8 * 0x70) +#define HW_APBX_CH9_BAR (0x70 + 9 * 0x70) +#define HW_APBX_CH10_BAR (0x70 + 10 * 0x70) +#define HW_APBX_CH11_BAR (0x70 + 11 * 0x70) +#define HW_APBX_CH12_BAR (0x70 + 12 * 0x70) +#define HW_APBX_CH13_BAR (0x70 + 13 * 0x70) +#define HW_APBX_CH14_BAR (0x70 + 14 * 0x70) +#define HW_APBX_CH15_BAR (0x70 + 15 * 0x70) + +#define HW_APBX_CHn_BAR 0x70 + +#define HW_APBX_CH0_SEMA (0x80 + 0 * 0x70) +#define HW_APBX_CH1_SEMA (0x80 + 1 * 0x70) +#define HW_APBX_CH2_SEMA (0x80 + 2 * 0x70) +#define HW_APBX_CH3_SEMA (0x80 + 3 * 0x70) +#define HW_APBX_CH4_SEMA (0x80 + 4 * 0x70) +#define HW_APBX_CH5_SEMA (0x80 + 5 * 0x70) +#define HW_APBX_CH6_SEMA (0x80 + 6 * 0x70) +#define HW_APBX_CH7_SEMA (0x80 + 7 * 0x70) +#define HW_APBX_CH8_SEMA (0x80 + 8 * 0x70) +#define HW_APBX_CH9_SEMA (0x80 + 9 * 0x70) +#define HW_APBX_CH10_SEMA (0x80 + 10 * 0x70) +#define HW_APBX_CH11_SEMA (0x80 + 11 * 0x70) +#define HW_APBX_CH12_SEMA (0x80 + 12 * 0x70) +#define HW_APBX_CH13_SEMA (0x80 + 13 * 0x70) +#define HW_APBX_CH14_SEMA (0x80 + 14 * 0x70) +#define HW_APBX_CH15_SEMA (0x80 + 15 * 0x70) + +#define HW_APBX_CHn_SEMA 0x80 +#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000 +#define BP_APBX_CHn_SEMA_PHORE 16 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h new file mode 100644 index 000000000000..3b511f947a53 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h @@ -0,0 +1,61 @@ +/* + * stmp37xx: AUDIOIN register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000) + +#define HW_AUDIOIN_CTRL 0x0 +#define BM_AUDIOIN_CTRL_RUN 0x00000001 +#define BP_AUDIOIN_CTRL_RUN 0 +#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020 +#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000 +#define BM_AUDIOIN_CTRL_SFTRST 0x80000000 + +#define HW_AUDIOIN_STAT 0x10 + +#define HW_AUDIOIN_ADCSRR 0x20 + +#define HW_AUDIOIN_ADCVOLUME 0x30 +#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF +#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0 +#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000 +#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16 + +#define HW_AUDIOIN_ADCDEBUG 0x40 + +#define HW_AUDIOIN_ADCVOL 0x50 +#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F +#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0 +#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030 +#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4 +#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00 +#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8 +#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000 +#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12 +#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000 + +#define HW_AUDIOIN_MICLINE 0x60 + +#define HW_AUDIOIN_ANACLKCTRL 0x70 +#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000 + +#define HW_AUDIOIN_DATA 0x80 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h new file mode 100644 index 000000000000..ca1942b8a3e9 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h @@ -0,0 +1,111 @@ +/* + * stmp37xx: AUDIOOUT register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000) + +#define HW_AUDIOOUT_CTRL 0x0 +#define BM_AUDIOOUT_CTRL_RUN 0x00000001 +#define BP_AUDIOOUT_CTRL_RUN 0 +#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040 +#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000 +#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000 + +#define HW_AUDIOOUT_STAT 0x10 + +#define HW_AUDIOOUT_DACSRR 0x20 +#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF +#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0 +#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000 +#define BP_AUDIOOUT_DACSRR_SRC_INT 16 +#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000 +#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24 +#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000 +#define BP_AUDIOOUT_DACSRR_BASEMULT 28 + +#define HW_AUDIOOUT_DACVOLUME 0x30 +#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100 +#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000 +#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000 + +#define HW_AUDIOOUT_DACDEBUG 0x40 + +#define HW_AUDIOOUT_HPVOL 0x50 +#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000 +#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000 + +#define HW_AUDIOOUT_PWRDN 0x70 +#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001 +#define BP_AUDIOOUT_PWRDN_HEADPHONE 0 +#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010 +#define BM_AUDIOOUT_PWRDN_ADC 0x00000100 +#define BM_AUDIOOUT_PWRDN_DAC 0x00001000 +#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000 +#define BM_AUDIOOUT_PWRDN_LINEOUT 0x01000000 + +#define HW_AUDIOOUT_REFCTRL 0x80 +#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0 +#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4 +#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00 +#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8 +#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000 +#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000 +#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000 +#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16 +#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000 +#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000 +#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20 +#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000 +#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000 + +#define HW_AUDIOOUT_ANACTRL 0x90 +#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010 +#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020 + +#define HW_AUDIOOUT_TEST 0xA0 +#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000 +#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22 + +#define HW_AUDIOOUT_BISTCTRL 0xB0 + +#define HW_AUDIOOUT_BISTSTAT0 0xC0 + +#define HW_AUDIOOUT_BISTSTAT1 0xD0 + +#define HW_AUDIOOUT_ANACLKCTRL 0xE0 +#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000 + +#define HW_AUDIOOUT_DATA 0xF0 + +#define HW_AUDIOOUT_LINEOUTCTRL 0x100 +#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0x0000001F +#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0 +#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 0x00001F00 +#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 8 +#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 0x00007000 +#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 12 +#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 0x00F00000 +#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 20 +#define BM_AUDIOOUT_LINEOUTCTRL_MUTE 0x01000000 +#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD 0x02000000 + +#define HW_AUDIOOUT_VERSION 0x200 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h new file mode 100644 index 000000000000..47f5c92fdaf6 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h @@ -0,0 +1,72 @@ +/* + * stmp37xx: CLKCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_CLKCTRL +#define _MACH_REGS_CLKCTRL + +#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000) + +#define HW_CLKCTRL_PLLCTRL0 0x0 +#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 + +#define HW_CLKCTRL_CPU 0x20 +#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F +#define BP_CLKCTRL_CPU_DIV_CPU 0 + +#define HW_CLKCTRL_HBUS 0x30 +#define BM_CLKCTRL_HBUS_DIV 0x0000001F +#define BP_CLKCTRL_HBUS_DIV 0 + +#define HW_CLKCTRL_XBUS 0x40 + +#define HW_CLKCTRL_XTAL 0x50 + +#define HW_CLKCTRL_PIX 0x60 +#define BM_CLKCTRL_PIX_DIV 0x00007FFF +#define BP_CLKCTRL_PIX_DIV 0 +#define BM_CLKCTRL_PIX_CLKGATE 0x80000000 + +#define HW_CLKCTRL_SSP 0x70 + +#define HW_CLKCTRL_GPMI 0x80 + +#define HW_CLKCTRL_SPDIF 0x90 + +#define HW_CLKCTRL_EMI 0xA0 + +#define HW_CLKCTRL_IR 0xB0 + +#define HW_CLKCTRL_SAIF 0xC0 + +#define HW_CLKCTRL_FRAC 0xD0 +#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00 +#define BP_CLKCTRL_FRAC_EMIFRAC 8 +#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000 +#define BP_CLKCTRL_FRAC_PIXFRAC 16 +#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000 + +#define HW_CLKCTRL_CLKSEQ 0xE0 +#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 + +#define HW_CLKCTRL_RESET 0xF0 +#define BM_CLKCTRL_RESET_DIG 0x00000001 +#define BP_CLKCTRL_RESET_DIG 0 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h new file mode 100644 index 000000000000..ba1bbe265c20 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h @@ -0,0 +1,24 @@ +/* + * stmp37xx: DIGCTL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000) + +#define HW_DIGCTL_CTRL 0x0 +#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h new file mode 100644 index 000000000000..3b6d990a3af5 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h @@ -0,0 +1,37 @@ +/* + * stmp37xx: ECC8 register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000) + +#define HW_ECC8_CTRL 0x0 +#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001 +#define BP_ECC8_CTRL_COMPLETE_IRQ 0 +#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100 +#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000 + +#define HW_ECC8_STATUS0 0x10 +#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004 +#define BM_ECC8_STATUS0_CORRECTED 0x00000008 +#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00 +#define BP_ECC8_STATUS0_STATUS_AUX 8 +#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000 +#define BP_ECC8_STATUS0_COMPLETED_CE 16 + +#define HW_ECC8_STATUS1 0x20 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h new file mode 100644 index 000000000000..f2b304f54490 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h @@ -0,0 +1,63 @@ +/* + * stmp37xx: GPMI register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000) +#define REGS_GPMI_PHYS 0x8000C000 +#define REGS_GPMI_SIZE 0x2000 + +#define HW_GPMI_CTRL0 0x0 +#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_GPMI_CTRL0_XFER_COUNT 0 +#define BM_GPMI_CTRL0_CS 0x00300000 +#define BP_GPMI_CTRL0_CS 20 +#define BM_GPMI_CTRL0_LOCK_CS 0x00400000 +#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000 +#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000 +#define BP_GPMI_CTRL0_COMMAND_MODE 24 +#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2 +#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3 +#define BM_GPMI_CTRL0_RUN 0x20000000 +#define BM_GPMI_CTRL0_CLKGATE 0x40000000 +#define BM_GPMI_CTRL0_SFTRST 0x80000000 +#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000 +#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000 +#define BP_GPMI_ECCCTRL_ECC_CMD 13 + +#define HW_GPMI_CTRL1 0x60 +#define BM_GPMI_CTRL1_GPMI_MODE 0x00000003 +#define BP_GPMI_CTRL1_GPMI_MODE 0 +#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004 +#define BM_GPMI_CTRL1_DEV_RESET 0x00000008 +#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200 +#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400 +#define BM_GPMI_CTRL1_DSAMPLE_TIME 0x00007000 +#define BP_GPMI_CTRL1_DSAMPLE_TIME 12 + +#define HW_GPMI_TIMING0 0x70 +#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF +#define BP_GPMI_TIMING0_DATA_SETUP 0 +#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00 +#define BP_GPMI_TIMING0_DATA_HOLD 8 + +#define HW_GPMI_TIMING1 0x80 +#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000 +#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h new file mode 100644 index 000000000000..35882a9b8bc5 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h @@ -0,0 +1,55 @@ +/* + * stmp37xx: I2C register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000) +#define REGS_I2C_PHYS 0x80058000 +#define REGS_I2C_SIZE 0x2000 + +#define HW_I2C_CTRL0 0x0 +#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_I2C_CTRL0_XFER_COUNT 0 +#define BM_I2C_CTRL0_DIRECTION 0x00010000 +#define BM_I2C_CTRL0_MASTER_MODE 0x00020000 +#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000 +#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000 +#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000 +#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000 +#define BM_I2C_CTRL0_CLKGATE 0x40000000 +#define BM_I2C_CTRL0_SFTRST 0x80000000 + +#define HW_I2C_TIMING0 0x10 + +#define HW_I2C_TIMING1 0x20 + +#define HW_I2C_TIMING2 0x30 + +#define HW_I2C_CTRL1 0x40 +#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001 +#define BP_I2C_CTRL1_SLAVE_IRQ 0 +#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002 +#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004 +#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008 +#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010 +#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020 +#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040 +#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080 +#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000 + +#define HW_I2C_VERSION 0x90 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h new file mode 100644 index 000000000000..3b7c92239e20 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h @@ -0,0 +1,43 @@ +/* + * stmp37xx: ICOLL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_ICOLL +#define _MACH_REGS_ICOLL + +#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0) + +#define HW_ICOLL_VECTOR 0x0 + +#define HW_ICOLL_LEVELACK 0x10 + +#define HW_ICOLL_CTRL 0x20 +#define BM_ICOLL_CTRL_CLKGATE 0x40000000 +#define BM_ICOLL_CTRL_SFTRST 0x80000000 + +#define HW_ICOLL_STAT 0x30 + +#define HW_ICOLL_PRIORITY0 (0x60 + 0 * 0x10) +#define HW_ICOLL_PRIORITY1 (0x60 + 1 * 0x10) +#define HW_ICOLL_PRIORITY2 (0x60 + 2 * 0x10) +#define HW_ICOLL_PRIORITY3 (0x60 + 3 * 0x10) + +#define HW_ICOLL_PRIORITYn 0x60 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h new file mode 100644 index 000000000000..72514e8b0737 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h @@ -0,0 +1,89 @@ +/* + * stmp37xx: LCDIF register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000) +#define REGS_LCDIF_PHYS 0x80030000 +#define REGS_LCDIF_SIZE 0x2000 + +#define HW_LCDIF_CTRL 0x0 +#define BM_LCDIF_CTRL_COUNT 0x0000FFFF +#define BP_LCDIF_CTRL_COUNT 0 +#define BM_LCDIF_CTRL_RUN 0x00010000 +#define BM_LCDIF_CTRL_WORD_LENGTH 0x00020000 +#define BM_LCDIF_CTRL_DATA_SELECT 0x00040000 +#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00080000 +#define BM_LCDIF_CTRL_VSYNC_MODE 0x00100000 +#define BM_LCDIF_CTRL_DATA_SWIZZLE 0x00600000 +#define BP_LCDIF_CTRL_DATA_SWIZZLE 21 +#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00800000 +#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x06000000 +#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 25 +#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x08000000 +#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x10000000 +#define BM_LCDIF_CTRL_CLKGATE 0x40000000 +#define BM_LCDIF_CTRL_SFTRST 0x80000000 + +#define HW_LCDIF_CTRL1 0x10 +#define BM_LCDIF_CTRL1_RESET 0x00000001 +#define BP_LCDIF_CTRL1_RESET 0 +#define BM_LCDIF_CTRL1_MODE86 0x00000002 +#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004 +#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100 +#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200 +#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400 +#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800 +#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000 +#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000 +#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16 + +#define HW_LCDIF_TIMING 0x20 + +#define HW_LCDIF_VDCTRL0 0x30 +#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT 0x000003FF +#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT 0 +#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000 +#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000 +#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000 +#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000 +#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000 +#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000 +#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000 +#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000 + +#define HW_LCDIF_VDCTRL1 0x40 +#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0x000FFFFF +#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0 +#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 0xFFF00000 +#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 20 + +#define HW_LCDIF_VDCTRL2 0x50 +#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT 0x000007FF +#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT 0 +#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x007FF800 +#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 11 +#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF800000 +#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 23 + +#define HW_LCDIF_VDCTRL3 0x60 +#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x000001FF +#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0 +#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x00FFF000 +#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 12 +#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON 0x01000000 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h new file mode 100644 index 000000000000..cc7b4702d1cd --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h @@ -0,0 +1,97 @@ +/* + * stmp37xx: LRADC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000) + +#define HW_LRADC_CTRL0 0x0 +#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF +#define BP_LRADC_CTRL0_SCHEDULE 0 +#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000 +#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000 +#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000 +#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000 +#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000 +#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000 +#define BM_LRADC_CTRL0_CLKGATE 0x40000000 +#define BM_LRADC_CTRL0_SFTRST 0x80000000 + +#define HW_LRADC_CTRL1 0x10 +#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001 +#define BP_LRADC_CTRL1_LRADC0_IRQ 0 +#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020 +#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040 +#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100 +#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000 +#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000 +#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000 + +#define HW_LRADC_CTRL2 0x20 +#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000 +#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16 +#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000 +#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000 +#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000 +#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24 + +#define HW_LRADC_CTRL3 0x30 +#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300 +#define BP_LRADC_CTRL3_CYCLE_TIME 8 + +#define HW_LRADC_STATUS 0x40 +#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001 +#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0 + +#define HW_LRADC_CH0 (0x50 + 0 * 0x10) +#define HW_LRADC_CH1 (0x50 + 1 * 0x10) +#define HW_LRADC_CH2 (0x50 + 2 * 0x10) +#define HW_LRADC_CH3 (0x50 + 3 * 0x10) +#define HW_LRADC_CH4 (0x50 + 4 * 0x10) +#define HW_LRADC_CH5 (0x50 + 5 * 0x10) +#define HW_LRADC_CH6 (0x50 + 6 * 0x10) +#define HW_LRADC_CH7 (0x50 + 7 * 0x10) + +#define HW_LRADC_CHn 0x50 +#define BM_LRADC_CHn_VALUE 0x0003FFFF +#define BP_LRADC_CHn_VALUE 0 +#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000 +#define BP_LRADC_CHn_NUM_SAMPLES 24 +#define BM_LRADC_CHn_ACCUMULATE 0x20000000 + +#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10) +#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10) +#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10) +#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10) + +#define HW_LRADC_DELAYn 0xD0 +#define BM_LRADC_DELAYn_DELAY 0x000007FF +#define BP_LRADC_DELAYn_DELAY 0 +#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800 +#define BP_LRADC_DELAYn_LOOP_COUNT 11 +#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000 +#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16 +#define BM_LRADC_DELAYn_KICK 0x00100000 +#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000 +#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24 + +#define HW_LRADC_CTRL4 0x140 +#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000 +#define BP_LRADC_CTRL4_LRADC6SELECT 24 +#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000 +#define BP_LRADC_CTRL4_LRADC7SELECT 28 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h new file mode 100644 index 000000000000..d5efce2388c7 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h @@ -0,0 +1,88 @@ +/* + * stmp37xx: PINCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_PINCTRL +#define _MACH_REGS_PINCTRL + +#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000) + +#define HW_PINCTRL_MUXSEL0 0x100 +#define HW_PINCTRL_MUXSEL1 0x110 +#define HW_PINCTRL_MUXSEL2 0x120 +#define HW_PINCTRL_MUXSEL3 0x130 +#define HW_PINCTRL_MUXSEL4 0x140 +#define HW_PINCTRL_MUXSEL5 0x150 +#define HW_PINCTRL_MUXSEL6 0x160 +#define HW_PINCTRL_MUXSEL7 0x170 + +#define HW_PINCTRL_DRIVE0 0x200 +#define HW_PINCTRL_DRIVE1 0x210 +#define HW_PINCTRL_DRIVE2 0x220 +#define HW_PINCTRL_DRIVE3 0x230 +#define HW_PINCTRL_DRIVE4 0x240 +#define HW_PINCTRL_DRIVE5 0x250 +#define HW_PINCTRL_DRIVE6 0x260 +#define HW_PINCTRL_DRIVE7 0x270 +#define HW_PINCTRL_DRIVE8 0x280 +#define HW_PINCTRL_DRIVE9 0x290 +#define HW_PINCTRL_DRIVE10 0x2A0 +#define HW_PINCTRL_DRIVE11 0x2B0 +#define HW_PINCTRL_DRIVE12 0x2C0 +#define HW_PINCTRL_DRIVE13 0x2D0 +#define HW_PINCTRL_DRIVE14 0x2E0 + +#define HW_PINCTRL_PULL0 0x300 +#define HW_PINCTRL_PULL1 0x310 +#define HW_PINCTRL_PULL2 0x320 +#define HW_PINCTRL_PULL3 0x330 + +#define HW_PINCTRL_DOUT0 0x400 +#define HW_PINCTRL_DOUT1 0x410 +#define HW_PINCTRL_DOUT2 0x420 + +#define HW_PINCTRL_DIN0 0x500 +#define HW_PINCTRL_DIN1 0x510 +#define HW_PINCTRL_DIN2 0x520 + +#define HW_PINCTRL_DOE0 0x600 +#define HW_PINCTRL_DOE1 0x610 +#define HW_PINCTRL_DOE2 0x620 + +#define HW_PINCTRL_PIN2IRQ0 0x700 +#define HW_PINCTRL_PIN2IRQ1 0x710 +#define HW_PINCTRL_PIN2IRQ2 0x720 + +#define HW_PINCTRL_IRQEN0 0x800 +#define HW_PINCTRL_IRQEN1 0x810 +#define HW_PINCTRL_IRQEN2 0x820 + +#define HW_PINCTRL_IRQLEVEL0 0x900 +#define HW_PINCTRL_IRQLEVEL1 0x910 +#define HW_PINCTRL_IRQLEVEL2 0x920 + +#define HW_PINCTRL_IRQPOL0 0xA00 +#define HW_PINCTRL_IRQPOL1 0xA10 +#define HW_PINCTRL_IRQPOL2 0xA20 + +#define HW_PINCTRL_IRQSTAT0 0xB00 +#define HW_PINCTRL_IRQSTAT1 0xB10 +#define HW_PINCTRL_IRQSTAT2 0xB20 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h new file mode 100644 index 000000000000..0e733d74a229 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-power.h @@ -0,0 +1,56 @@ +/* + * stmp37xx: POWER register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_POWER +#define _MACH_REGS_POWER + +#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000) + +#define HW_POWER_CTRL 0x0 +#define BM_POWER_CTRL_CLKGATE 0x40000000 + +#define HW_POWER_5VCTRL 0x10 + +#define HW_POWER_MINPWR 0x20 + +#define HW_POWER_CHARGE 0x30 + +#define HW_POWER_VDDDCTRL 0x40 + +#define HW_POWER_VDDACTRL 0x50 + +#define HW_POWER_VDDIOCTRL 0x60 +#define BM_POWER_VDDIOCTRL_TRG 0x0000001F +#define BP_POWER_VDDIOCTRL_TRG 0 + +#define HW_POWER_STS 0xB0 +#define BM_POWER_STS_VBUSVALID 0x00000002 +#define BM_POWER_STS_BVALID 0x00000004 +#define BM_POWER_STS_AVALID 0x00000008 +#define BM_POWER_STS_DC_OK 0x00000100 + +#define HW_POWER_RESET 0xE0 + +#define HW_POWER_DEBUG 0xF0 +#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002 +#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004 +#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h new file mode 100644 index 000000000000..15966a1b62e0 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h @@ -0,0 +1,51 @@ +/* + * stmp37xx: PWM register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000) + +#define HW_PWM_CTRL 0x0 +#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004 +#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020 + +#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20) +#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20) +#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20) +#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20) + +#define HW_PWM_ACTIVEn 0x10 +#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF +#define BP_PWM_ACTIVEn_ACTIVE 0 +#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000 +#define BP_PWM_ACTIVEn_INACTIVE 16 + +#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20) +#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20) +#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20) +#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20) + +#define HW_PWM_PERIODn 0x20 +#define BM_PWM_PERIODn_PERIOD 0x0000FFFF +#define BP_PWM_PERIODn_PERIOD 0 +#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000 +#define BP_PWM_PERIODn_ACTIVE_STATE 16 +#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000 +#define BP_PWM_PERIODn_INACTIVE_STATE 18 +#define BM_PWM_PERIODn_CDIV 0x00700000 +#define BP_PWM_PERIODn_CDIV 20 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h new file mode 100644 index 000000000000..fac40edc38a1 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h @@ -0,0 +1,57 @@ +/* + * stmp37xx: RTC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000) +#define REGS_RTC_PHYS 0x8005C000 +#define REGS_RTC_SIZE 0x2000 + +#define HW_RTC_CTRL 0x0 +#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001 +#define BP_RTC_CTRL_ALARM_IRQ_EN 0 +#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002 +#define BM_RTC_CTRL_ALARM_IRQ 0x00000004 +#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008 +#define BM_RTC_CTRL_WATCHDOGEN 0x00000010 + +#define HW_RTC_STAT 0x10 +#define BM_RTC_STAT_NEW_REGS 0x0000FF00 +#define BP_RTC_STAT_NEW_REGS 8 +#define BM_RTC_STAT_STALE_REGS 0x00FF0000 +#define BP_RTC_STAT_STALE_REGS 16 +#define BM_RTC_STAT_RTC_PRESENT 0x80000000 + +#define HW_RTC_SECONDS 0x30 + +#define HW_RTC_ALARM 0x40 + +#define HW_RTC_WATCHDOG 0x50 + +#define HW_RTC_PERSISTENT0 0x60 +#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002 +#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004 +#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010 +#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020 +#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080 +#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000 +#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18 + +#define HW_RTC_PERSISTENT1 0x70 + +#define HW_RTC_VERSION 0xD0 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h new file mode 100644 index 000000000000..cbde891a06c2 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h @@ -0,0 +1,101 @@ +/* + * stmp37xx: SSP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SSP_BASE (STMP3XXX_REGS_BASE + 0x10000) +#define REGS_SSP1_PHYS 0x80010000 +#define REGS_SSP2_PHYS 0x80034000 +#define REGS_SSP_SIZE 0x2000 + +#define HW_SSP_CTRL0 0x0 +#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_SSP_CTRL0_XFER_COUNT 0 +#define BM_SSP_CTRL0_ENABLE 0x00010000 +#define BM_SSP_CTRL0_GET_RESP 0x00020000 +#define BM_SSP_CTRL0_LONG_RESP 0x00080000 +#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000 +#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000 +#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000 +#define BP_SSP_CTRL0_BUS_WIDTH 22 +#define BM_SSP_CTRL0_DATA_XFER 0x01000000 +#define BM_SSP_CTRL0_READ 0x02000000 +#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000 +#define BM_SSP_CTRL0_LOCK_CS 0x08000000 +#define BM_SSP_CTRL0_RUN 0x20000000 +#define BM_SSP_CTRL0_CLKGATE 0x40000000 +#define BM_SSP_CTRL0_SFTRST 0x80000000 + +#define HW_SSP_CMD0 0x10 +#define BM_SSP_CMD0_CMD 0x000000FF +#define BP_SSP_CMD0_CMD 0 +#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00 +#define BP_SSP_CMD0_BLOCK_COUNT 8 +#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000 +#define BP_SSP_CMD0_BLOCK_SIZE 16 +#define BM_SSP_CMD0_APPEND_8CYC 0x00100000 +#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF +#define BP_SSP_CMD1_CMD_ARG 0 + +#define HW_SSP_TIMING 0x50 +#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF +#define BP_SSP_TIMING_CLOCK_RATE 0 +#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00 +#define BP_SSP_TIMING_CLOCK_DIVIDE 8 +#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000 +#define BP_SSP_TIMING_TIMEOUT 16 + +#define HW_SSP_CTRL1 0x60 +#define BM_SSP_CTRL1_SSP_MODE 0x0000000F +#define BP_SSP_CTRL1_SSP_MODE 0 +#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0 +#define BP_SSP_CTRL1_WORD_LENGTH 4 +#define BM_SSP_CTRL1_POLARITY 0x00000200 +#define BM_SSP_CTRL1_PHASE 0x00000400 +#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000 +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000 +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000 +#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000 + +#define HW_SSP_DATA 0x70 + +#define HW_SSP_SDRESP0 0x80 + +#define HW_SSP_SDRESP1 0x90 + +#define HW_SSP_SDRESP2 0xA0 + +#define HW_SSP_SDRESP3 0xB0 + +#define HW_SSP_STATUS 0xC0 +#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020 +#define BM_SSP_STATUS_TIMEOUT 0x00001000 +#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000 +#define BM_SSP_STATUS_RESP_ERR 0x00008000 +#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000 +#define BM_SSP_STATUS_CARD_DETECT 0x10000000 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h new file mode 100644 index 000000000000..4af0f6edfa78 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h @@ -0,0 +1,49 @@ +/* + * stmp37xx: TIMROT register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_TIMROT +#define _MACH_REGS_TIMROT + +#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000) + +#define HW_TIMROT_ROTCTRL 0x0 +#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000 +#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000 + +#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20) +#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20) +#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20) + +#define HW_TIMROT_TIMCTRLn 0x20 +#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F +#define BP_TIMROT_TIMCTRLn_SELECT 0 +#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030 +#define BP_TIMROT_TIMCTRLn_PRESCALE 4 +#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040 +#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080 +#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000 +#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000 + +#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20) +#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20) +#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20) + +#define HW_TIMROT_TIMCOUNTn 0x30 +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h new file mode 100644 index 000000000000..0594275d860c --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h @@ -0,0 +1,85 @@ +/* + * stmp37xx: UARTAPP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_UARTAPP_BASE (STMP3XXX_REGS_BASE + 0x6C000) +#define REGS_UARTAPP1_PHYS 0x8006C000 +#define REGS_UARTAPP_SIZE 0x2000 + +#define HW_UARTAPP_CTRL0 0x0 +#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_UARTAPP_CTRL0_XFER_COUNT 0 +#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000 +#define BP_UARTAPP_CTRL0_RXTIMEOUT 16 +#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000 +#define BM_UARTAPP_CTRL0_RUN 0x20000000 +#define BM_UARTAPP_CTRL0_SFTRST 0x80000000 +#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF +#define BP_UARTAPP_CTRL1_XFER_COUNT 0 +#define BM_UARTAPP_CTRL1_RUN 0x10000000 + +#define HW_UARTAPP_CTRL2 0x20 +#define BM_UARTAPP_CTRL2_UARTEN 0x00000001 +#define BP_UARTAPP_CTRL2_UARTEN 0 +#define BM_UARTAPP_CTRL2_TXE 0x00000100 +#define BM_UARTAPP_CTRL2_RXE 0x00000200 +#define BM_UARTAPP_CTRL2_RTS 0x00000800 +#define BM_UARTAPP_CTRL2_RTSEN 0x00004000 +#define BM_UARTAPP_CTRL2_CTSEN 0x00008000 +#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000 +#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000 +#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000 + +#define HW_UARTAPP_LINECTRL 0x30 +#define BM_UARTAPP_LINECTRL_BRK 0x00000001 +#define BP_UARTAPP_LINECTRL_BRK 0 +#define BM_UARTAPP_LINECTRL_PEN 0x00000002 +#define BM_UARTAPP_LINECTRL_EPS 0x00000004 +#define BM_UARTAPP_LINECTRL_STP2 0x00000008 +#define BM_UARTAPP_LINECTRL_FEN 0x00000010 +#define BM_UARTAPP_LINECTRL_WLEN 0x00000060 +#define BP_UARTAPP_LINECTRL_WLEN 5 +#define BM_UARTAPP_LINECTRL_SPS 0x00000080 +#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00 +#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8 +#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000 +#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16 + +#define HW_UARTAPP_INTR 0x50 +#define BM_UARTAPP_INTR_CTSMIS 0x00000002 +#define BM_UARTAPP_INTR_RTIS 0x00000040 +#define BM_UARTAPP_INTR_CTSMIEN 0x00020000 +#define BM_UARTAPP_INTR_RXIEN 0x00100000 +#define BM_UARTAPP_INTR_RTIEN 0x00400000 + +#define HW_UARTAPP_DATA 0x60 + +#define HW_UARTAPP_STAT 0x70 +#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF +#define BP_UARTAPP_STAT_RXCOUNT 0 +#define BM_UARTAPP_STAT_FERR 0x00010000 +#define BM_UARTAPP_STAT_PERR 0x00020000 +#define BM_UARTAPP_STAT_BERR 0x00040000 +#define BM_UARTAPP_STAT_OERR 0x00080000 +#define BM_UARTAPP_STAT_RXFE 0x01000000 +#define BM_UARTAPP_STAT_TXFF 0x02000000 +#define BM_UARTAPP_STAT_TXFE 0x08000000 +#define BM_UARTAPP_STAT_CTS 0x10000000 + +#define HW_UARTAPP_VERSION 0x90 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h new file mode 100644 index 000000000000..b810deb552a9 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h @@ -0,0 +1,268 @@ +/* + * stmp378x: UARTDBG register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000) +#define REGS_UARTDBG_PHYS 0x80070000 +#define REGS_UARTDBG_SIZE 0x2000 + +#define HW_UARTDBGDR 0x00000000 +#define BP_UARTDBGDR_UNAVAILABLE 16 +#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGDR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE) +#define BP_UARTDBGDR_RESERVED 12 +#define BM_UARTDBGDR_RESERVED 0x0000F000 +#define BF_UARTDBGDR_RESERVED(v) \ + (((v) << 12) & BM_UARTDBGDR_RESERVED) +#define BM_UARTDBGDR_OE 0x00000800 +#define BM_UARTDBGDR_BE 0x00000400 +#define BM_UARTDBGDR_PE 0x00000200 +#define BM_UARTDBGDR_FE 0x00000100 +#define BP_UARTDBGDR_DATA 0 +#define BM_UARTDBGDR_DATA 0x000000FF +#define BF_UARTDBGDR_DATA(v) \ + (((v) << 0) & BM_UARTDBGDR_DATA) +#define HW_UARTDBGRSR_ECR 0x00000004 +#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8 +#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE) +#define BP_UARTDBGRSR_ECR_EC 4 +#define BM_UARTDBGRSR_ECR_EC 0x000000F0 +#define BF_UARTDBGRSR_ECR_EC(v) \ + (((v) << 4) & BM_UARTDBGRSR_ECR_EC) +#define BM_UARTDBGRSR_ECR_OE 0x00000008 +#define BM_UARTDBGRSR_ECR_BE 0x00000004 +#define BM_UARTDBGRSR_ECR_PE 0x00000002 +#define BM_UARTDBGRSR_ECR_FE 0x00000001 +#define HW_UARTDBGFR 0x00000018 +#define BP_UARTDBGFR_UNAVAILABLE 16 +#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGFR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE) +#define BP_UARTDBGFR_RESERVED 9 +#define BM_UARTDBGFR_RESERVED 0x0000FE00 +#define BF_UARTDBGFR_RESERVED(v) \ + (((v) << 9) & BM_UARTDBGFR_RESERVED) +#define BM_UARTDBGFR_RI 0x00000100 +#define BM_UARTDBGFR_TXFE 0x00000080 +#define BM_UARTDBGFR_RXFF 0x00000040 +#define BM_UARTDBGFR_TXFF 0x00000020 +#define BM_UARTDBGFR_RXFE 0x00000010 +#define BM_UARTDBGFR_BUSY 0x00000008 +#define BM_UARTDBGFR_DCD 0x00000004 +#define BM_UARTDBGFR_DSR 0x00000002 +#define BM_UARTDBGFR_CTS 0x00000001 +#define HW_UARTDBGILPR 0x00000020 +#define BP_UARTDBGILPR_UNAVAILABLE 8 +#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGILPR_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE) +#define BP_UARTDBGILPR_ILPDVSR 0 +#define BM_UARTDBGILPR_ILPDVSR 0x000000FF +#define BF_UARTDBGILPR_ILPDVSR(v) \ + (((v) << 0) & BM_UARTDBGILPR_ILPDVSR) +#define HW_UARTDBGIBRD 0x00000024 +#define BP_UARTDBGIBRD_UNAVAILABLE 16 +#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIBRD_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE) +#define BP_UARTDBGIBRD_BAUD_DIVINT 0 +#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF +#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \ + (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT) +#define HW_UARTDBGFBRD 0x00000028 +#define BP_UARTDBGFBRD_UNAVAILABLE 8 +#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGFBRD_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE) +#define BP_UARTDBGFBRD_RESERVED 6 +#define BM_UARTDBGFBRD_RESERVED 0x000000C0 +#define BF_UARTDBGFBRD_RESERVED(v) \ + (((v) << 6) & BM_UARTDBGFBRD_RESERVED) +#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0 +#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F +#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \ + (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC) +#define HW_UARTDBGLCR_H 0x0000002c +#define BP_UARTDBGLCR_H_UNAVAILABLE 16 +#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE) +#define BP_UARTDBGLCR_H_RESERVED 8 +#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00 +#define BF_UARTDBGLCR_H_RESERVED(v) \ + (((v) << 8) & BM_UARTDBGLCR_H_RESERVED) +#define BM_UARTDBGLCR_H_SPS 0x00000080 +#define BP_UARTDBGLCR_H_WLEN 5 +#define BM_UARTDBGLCR_H_WLEN 0x00000060 +#define BF_UARTDBGLCR_H_WLEN(v) \ + (((v) << 5) & BM_UARTDBGLCR_H_WLEN) +#define BM_UARTDBGLCR_H_FEN 0x00000010 +#define BM_UARTDBGLCR_H_STP2 0x00000008 +#define BM_UARTDBGLCR_H_EPS 0x00000004 +#define BM_UARTDBGLCR_H_PEN 0x00000002 +#define BM_UARTDBGLCR_H_BRK 0x00000001 +#define HW_UARTDBGCR 0x00000030 +#define BP_UARTDBGCR_UNAVAILABLE 16 +#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGCR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE) +#define BM_UARTDBGCR_CTSEN 0x00008000 +#define BM_UARTDBGCR_RTSEN 0x00004000 +#define BM_UARTDBGCR_OUT2 0x00002000 +#define BM_UARTDBGCR_OUT1 0x00001000 +#define BM_UARTDBGCR_RTS 0x00000800 +#define BM_UARTDBGCR_DTR 0x00000400 +#define BM_UARTDBGCR_RXE 0x00000200 +#define BM_UARTDBGCR_TXE 0x00000100 +#define BM_UARTDBGCR_LBE 0x00000080 +#define BP_UARTDBGCR_RESERVED 3 +#define BM_UARTDBGCR_RESERVED 0x00000078 +#define BF_UARTDBGCR_RESERVED(v) \ + (((v) << 3) & BM_UARTDBGCR_RESERVED) +#define BM_UARTDBGCR_SIRLP 0x00000004 +#define BM_UARTDBGCR_SIREN 0x00000002 +#define BM_UARTDBGCR_UARTEN 0x00000001 +#define HW_UARTDBGIFLS 0x00000034 +#define BP_UARTDBGIFLS_UNAVAILABLE 16 +#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIFLS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE) +#define BP_UARTDBGIFLS_RESERVED 6 +#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0 +#define BF_UARTDBGIFLS_RESERVED(v) \ + (((v) << 6) & BM_UARTDBGIFLS_RESERVED) +#define BP_UARTDBGIFLS_RXIFLSEL 3 +#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038 +#define BF_UARTDBGIFLS_RXIFLSEL(v) \ + (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL) +#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0 +#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1 +#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2 +#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3 +#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7 +#define BP_UARTDBGIFLS_TXIFLSEL 0 +#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007 +#define BF_UARTDBGIFLS_TXIFLSEL(v) \ + (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL) +#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0 +#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1 +#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2 +#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3 +#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7 +#define HW_UARTDBGIMSC 0x00000038 +#define BP_UARTDBGIMSC_UNAVAILABLE 16 +#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIMSC_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE) +#define BP_UARTDBGIMSC_RESERVED 11 +#define BM_UARTDBGIMSC_RESERVED 0x0000F800 +#define BF_UARTDBGIMSC_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGIMSC_RESERVED) +#define BM_UARTDBGIMSC_OEIM 0x00000400 +#define BM_UARTDBGIMSC_BEIM 0x00000200 +#define BM_UARTDBGIMSC_PEIM 0x00000100 +#define BM_UARTDBGIMSC_FEIM 0x00000080 +#define BM_UARTDBGIMSC_RTIM 0x00000040 +#define BM_UARTDBGIMSC_TXIM 0x00000020 +#define BM_UARTDBGIMSC_RXIM 0x00000010 +#define BM_UARTDBGIMSC_DSRMIM 0x00000008 +#define BM_UARTDBGIMSC_DCDMIM 0x00000004 +#define BM_UARTDBGIMSC_CTSMIM 0x00000002 +#define BM_UARTDBGIMSC_RIMIM 0x00000001 +#define HW_UARTDBGRIS 0x0000003c +#define BP_UARTDBGRIS_UNAVAILABLE 16 +#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGRIS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE) +#define BP_UARTDBGRIS_RESERVED 11 +#define BM_UARTDBGRIS_RESERVED 0x0000F800 +#define BF_UARTDBGRIS_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGRIS_RESERVED) +#define BM_UARTDBGRIS_OERIS 0x00000400 +#define BM_UARTDBGRIS_BERIS 0x00000200 +#define BM_UARTDBGRIS_PERIS 0x00000100 +#define BM_UARTDBGRIS_FERIS 0x00000080 +#define BM_UARTDBGRIS_RTRIS 0x00000040 +#define BM_UARTDBGRIS_TXRIS 0x00000020 +#define BM_UARTDBGRIS_RXRIS 0x00000010 +#define BM_UARTDBGRIS_DSRRMIS 0x00000008 +#define BM_UARTDBGRIS_DCDRMIS 0x00000004 +#define BM_UARTDBGRIS_CTSRMIS 0x00000002 +#define BM_UARTDBGRIS_RIRMIS 0x00000001 +#define HW_UARTDBGMIS 0x00000040 +#define BP_UARTDBGMIS_UNAVAILABLE 16 +#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGMIS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE) +#define BP_UARTDBGMIS_RESERVED 11 +#define BM_UARTDBGMIS_RESERVED 0x0000F800 +#define BF_UARTDBGMIS_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGMIS_RESERVED) +#define BM_UARTDBGMIS_OEMIS 0x00000400 +#define BM_UARTDBGMIS_BEMIS 0x00000200 +#define BM_UARTDBGMIS_PEMIS 0x00000100 +#define BM_UARTDBGMIS_FEMIS 0x00000080 +#define BM_UARTDBGMIS_RTMIS 0x00000040 +#define BM_UARTDBGMIS_TXMIS 0x00000020 +#define BM_UARTDBGMIS_RXMIS 0x00000010 +#define BM_UARTDBGMIS_DSRMMIS 0x00000008 +#define BM_UARTDBGMIS_DCDMMIS 0x00000004 +#define BM_UARTDBGMIS_CTSMMIS 0x00000002 +#define BM_UARTDBGMIS_RIMMIS 0x00000001 +#define HW_UARTDBGICR 0x00000044 +#define BP_UARTDBGICR_UNAVAILABLE 16 +#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGICR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE) +#define BP_UARTDBGICR_RESERVED 11 +#define BM_UARTDBGICR_RESERVED 0x0000F800 +#define BF_UARTDBGICR_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGICR_RESERVED) +#define BM_UARTDBGICR_OEIC 0x00000400 +#define BM_UARTDBGICR_BEIC 0x00000200 +#define BM_UARTDBGICR_PEIC 0x00000100 +#define BM_UARTDBGICR_FEIC 0x00000080 +#define BM_UARTDBGICR_RTIC 0x00000040 +#define BM_UARTDBGICR_TXIC 0x00000020 +#define BM_UARTDBGICR_RXIC 0x00000010 +#define BM_UARTDBGICR_DSRMIC 0x00000008 +#define BM_UARTDBGICR_DCDMIC 0x00000004 +#define BM_UARTDBGICR_CTSMIC 0x00000002 +#define BM_UARTDBGICR_RIMIC 0x00000001 +#define HW_UARTDBGDMACR 0x00000048 +#define BP_UARTDBGDMACR_UNAVAILABLE 16 +#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGDMACR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE) +#define BP_UARTDBGDMACR_RESERVED 3 +#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8 +#define BF_UARTDBGDMACR_RESERVED(v) \ + (((v) << 3) & BM_UARTDBGDMACR_RESERVED) +#define BM_UARTDBGDMACR_DMAONERR 0x00000004 +#define BM_UARTDBGDMACR_TXDMAE 0x00000002 +#define BM_UARTDBGDMACR_RXDMAE 0x00000001 diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h index a93df7cba694..9145e22df32c 100644 --- a/arch/arm/mach-imx/include/mach/memory.h +++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h @@ -1,8 +1,8 @@ /* - * arch/arm/mach-imx/include/mach/memory.h + * stmp37xx: USBCTL register definitions * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,11 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H - -#define PHYS_OFFSET UL(0x08000000) - -#endif +#define REGS_USBCTL_BASE (STMP3XXX_REGS_BASE + 0x80000) +#define REGS_USBCTL_PHYS 0x80000 diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h index 7d7cb0bde3e8..1a2ae9cbdfed 100644 --- a/arch/arm/mach-imx/include/mach/vmalloc.h +++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h @@ -1,7 +1,8 @@ /* - * arch/arm/mach-imx/include/mach/vmalloc.h + * stmp37xx: USBCTRL register definitions * - * Copyright (C) 2000 Russell King. + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,6 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000) +#define REGS_USBCTRL_PHYS 0x80080000 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h new file mode 100644 index 000000000000..b7fce0fbc560 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h @@ -0,0 +1,37 @@ +/* + * stmp37xx: USBPHY register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000) + +#define HW_USBPHY_PWD 0x0 + +#define HW_USBPHY_CTRL 0x30 +#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT 0x00000001 +#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT 0 +#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002 +#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010 +#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080 +#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800 +#define BM_USBPHY_CTRL_CLKGATE 0x40000000 +#define BM_USBPHY_CTRL_SFTRST 0x80000000 + +#define HW_USBPHY_STATUS 0x40 +#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040 +#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100 diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c new file mode 100644 index 000000000000..8c7d6fb191a3 --- /dev/null +++ b/arch/arm/mach-stmp37xx/stmp37xx.c @@ -0,0 +1,219 @@ +/* + * Freescale STMP37XX platform support + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include <mach/stmp3xxx.h> +#include <mach/dma.h> + +#include <mach/platform.h> +#include <mach/regs-icoll.h> +#include <mach/regs-apbh.h> +#include <mach/regs-apbx.h> +#include "stmp37xx.h" + +/* + * IRQ handling + */ +static void stmp37xx_ack_irq(unsigned int irq) +{ + /* Disable IRQ */ + stmp3xxx_clearl(0x04 << ((irq % 4) * 8), + REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10); + + /* ACK current interrupt */ + __raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK); + + /* Barrier */ + (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT); +} + +static void stmp37xx_mask_irq(unsigned int irq) +{ + /* IRQ disable */ + stmp3xxx_clearl(0x04 << ((irq % 4) * 8), + REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10); +} + +static void stmp37xx_unmask_irq(unsigned int irq) +{ + /* IRQ enable */ + stmp3xxx_setl(0x04 << ((irq % 4) * 8), + REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10); +} + +static struct irq_chip stmp37xx_chip = { + .ack = stmp37xx_ack_irq, + .mask = stmp37xx_mask_irq, + .unmask = stmp37xx_unmask_irq, +}; + +void __init stmp37xx_init_irq(void) +{ + stmp3xxx_init_irq(&stmp37xx_chip); +} + +/* + * DMA interrupt handling + */ +void stmp3xxx_arch_dma_enable_interrupt(int channel) +{ + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)), + REGS_APBH_BASE + HW_APBH_CTRL1); + break; + + case STMP3XXX_BUS_APBX: + stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)), + REGS_APBX_BASE + HW_APBX_CTRL1); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt); + +void stmp3xxx_arch_dma_clear_interrupt(int channel) +{ + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), + REGS_APBH_BASE + HW_APBH_CTRL1); + break; + + case STMP3XXX_BUS_APBX: + stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), + REGS_APBX_BASE + HW_APBX_CTRL1); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt); + +int stmp3xxx_arch_dma_is_interrupt(int channel) +{ + int r = 0; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) & + (1 << STMP3XXX_DMA_CHANNEL(channel)); + break; + + case STMP3XXX_BUS_APBX: + r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) & + (1 << STMP3XXX_DMA_CHANNEL(channel)); + break; + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt); + +void stmp3xxx_arch_dma_reset_channel(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + /* Reset channel and wait for it to complete */ + stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL, + REGS_APBH_BASE + HW_APBH_CTRL0); + while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) & + (chbit << BP_APBH_CTRL0_RESET_CHANNEL)) + cpu_relax(); + break; + + case STMP3XXX_BUS_APBX: + stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL, + REGS_APBX_BASE + HW_APBX_CTRL0); + while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) & + (chbit << BP_APBX_CTRL0_RESET_CHANNEL)) + cpu_relax(); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel); + +void stmp3xxx_arch_dma_freeze(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + case STMP3XXX_BUS_APBX: + stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze); + +void stmp3xxx_arch_dma_unfreeze(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + case STMP3XXX_BUS_APBX: + stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze); + +/* + * The registers are all very closely mapped, so we might as well map them all + * with a single mapping + * + * Logical Physical + * f0000000 80000000 On-chip registers + * f1000000 00000000 32k on-chip SRAM + */ +static struct map_desc stmp37xx_io_desc[] __initdata = { + { + .virtual = (u32)STMP3XXX_REGS_BASE, + .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE), + .length = SZ_1M, + .type = MT_DEVICE + }, + { + .virtual = (u32)STMP3XXX_OCRAM_BASE, + .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE), + .length = STMP3XXX_OCRAM_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init stmp37xx_map_io(void) +{ + iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc)); +} diff --git a/arch/arm/mach-stmp37xx/stmp37xx.h b/arch/arm/mach-stmp37xx/stmp37xx.h new file mode 100644 index 000000000000..0b75fb796a64 --- /dev/null +++ b/arch/arm/mach-stmp37xx/stmp37xx.h @@ -0,0 +1,24 @@ +/* + * Freescale STMP37XX/STMP378X internal functions and data declarations + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __MACH_STMP37XX_H +#define __MACH_STMP37XX_H + +void stmp37xx_map_io(void); +void stmp37xx_init_irq(void); + +#endif /* __MACH_STMP37XX_H */ diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c new file mode 100644 index 000000000000..394f21ab59e6 --- /dev/null +++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c @@ -0,0 +1,101 @@ +/* + * Freescale STMP37XX development board support + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/stmp3xxx.h> +#include <mach/pins.h> +#include <mach/pinmux.h> +#include "stmp37xx.h" + +/* + * List of STMP37xx development board specific devices + */ +static struct platform_device *stmp37xx_devb_devices[] = { + &stmp3xxx_dbguart, + &stmp3xxx_appuart, +}; + +static struct pin_desc dbguart_pins_0[] = { + { PINID_PWM0, PIN_FUN3, }, + { PINID_PWM1, PIN_FUN3, }, +}; + +struct pin_desc appuart_pins_0[] = { + { PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, +}; + +static struct pin_group appuart_pins[] = { + [0] = { + .pins = appuart_pins_0, + .nr_pins = ARRAY_SIZE(appuart_pins_0), + }, + /* 37xx has the only app uart */ +}; + +static struct pin_group dbguart_pins[] = { + [0] = { + .pins = dbguart_pins_0, + .nr_pins = ARRAY_SIZE(dbguart_pins_0), + }, +}; + +static int dbguart_pins_control(int id, int request) +{ + int r = 0; + + if (request) + r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart"); + else + stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart"); + return r; +} + + +static void __init stmp37xx_devb_init(void) +{ + stmp3xxx_pinmux_init(NR_REAL_IRQS); + + /* Init STMP3xxx platform */ + stmp3xxx_init(); + + stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control; + stmp3xxx_appuart.dev.platform_data = appuart_pins; + + /* Add STMP37xx development board devices */ + platform_add_devices(stmp37xx_devb_devices, + ARRAY_SIZE(stmp37xx_devb_devices)); +} + +MACHINE_START(STMP37XX, "STMP37XX") + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = stmp37xx_map_io, + .init_irq = stmp37xx_init_irq, + .timer = &stmp3xxx_timer, + .init_machine = stmp37xx_devb_init, +MACHINE_END diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig new file mode 100644 index 000000000000..337b9aabce49 --- /dev/null +++ b/arch/arm/mach-u300/Kconfig @@ -0,0 +1,105 @@ +if ARCH_U300 + +menu "ST-Ericsson AB U300/U330/U335/U365 Platform" + +comment "ST-Ericsson Mobile Platform Products" + +config MACH_U300 + bool "U300" + +comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" + +choice + prompt "U300/U330/U335/U365 system type" + default MACH_U300_BS2X + ---help--- + You need to select the target system, i.e. the + U300/U330/U335/U365 board that you want to compile your kernel + for. + +config MACH_U300_BS2X + bool "S26/S26/B25/B26 Test Products" + depends on MACH_U300 + help + Select this if you're developing on the + S26/S25 test products. (Also works on + B26/B25 big boards.) + +config MACH_U300_BS330 + bool "S330/B330 Test Products" + depends on MACH_U300 + help + Select this if you're developing on the + S330/B330 test products. + +config MACH_U300_BS335 + bool "S335/B335 Test Products" + depends on MACH_U300 + help + Select this if you're developing on the + S335/B335 test products. + +config MACH_U300_BS365 + bool "S365/B365 Test Products" + depends on MACH_U300 + help + Select this if you're developing on the + S365/B365 test products. + +endchoice + +choice + prompt "Memory configuration" + default MACH_U300_SINGLE_RAM + ---help--- + You have to config the kernel according to the physical memory + configuration. + +config MACH_U300_SINGLE_RAM + bool "Single RAM" + help + Select this if you want support for Single RAM phones. + +config MACH_U300_DUAL_RAM + bool "Dual RAM" + help + Select this if you want support for Dual RAM phones. + This is two RAM memorys on different EMIFs. +endchoice + +config U300_DEBUG + bool "Debug support for U300" + depends on PM + help + Debug support for U300 in sysfs, procfs etc. + +config MACH_U300_SEMI_IS_SHARED + bool "The SEMI is used by both the access and application side" + depends on MACH_U300 + help + This makes it possible to use the SEMI (Shared External + Memory Interface) from both from access and application + side. + +comment "All the settings below must match the bootloader's settings" + +config MACH_U300_ACCESS_MEM_SIZE + int "Access CPU memory allocation" + range 7 25 + depends on MACH_U300_SINGLE_RAM + default 13 + help + How much memory in MiB that the Access side CPU has allocated + +config MACH_U300_2MB_ALIGNMENT_FIX + bool "2MiB alignment fix" + depends on MACH_U300_SINGLE_RAM + default y + help + If yes and the Access side CPU has allocated an odd size in + MiB, this fix gives you one MiB extra that would otherwise be + lost due to Linux 2 MiB alignment policy. + +endmenu + +endif diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile new file mode 100644 index 000000000000..24950e0df4b4 --- /dev/null +++ b/arch/arm/mach-u300/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel, U300 machine. +# + +obj-y := core.o clock.o timer.o gpio.o padmux.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_U300) += u300.o +obj-$(CONFIG_MMC) += mmc.o diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot new file mode 100644 index 000000000000..6fbfc6ea2d35 --- /dev/null +++ b/arch/arm/mach-u300/Makefile.boot @@ -0,0 +1,15 @@ +# Note: the following conditions must always be true: +# ZRELADDR == virt_to_phys(TEXTADDR) +# PARAMS_PHYS must be within 4MB of ZRELADDR +# INITRD_PHYS must be in RAM + +ifdef CONFIG_MACH_U300_SINGLE_RAM + zreladdr-y := 0x28E08000 + params_phys-y := 0x28E00100 +else + zreladdr-y := 0x48008000 + params_phys-y := 0x48000100 +endif + +# This isn't used. +#initrd_phys-y := 0x29800000 diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c new file mode 100644 index 000000000000..5cd04d6751b3 --- /dev/null +++ b/arch/arm/mach-u300/clock.c @@ -0,0 +1,1487 @@ +/* + * + * arch/arm/mach-u300/clock.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Define clocks in the app platform. + * Author: Linus Walleij <linus.walleij@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/io.h> + +#include <asm/clkdev.h> +#include <mach/hardware.h> +#include <mach/syscon.h> + +#include "clock.h" + +/* + * TODO: + * - move all handling of the CCR register into this file and create + * a spinlock for the CCR register + * - switch to the clkdevice lookup mechanism that maps clocks to + * device ID:s instead when it becomes available in kernel 2.6.29. + * - implement rate get/set for all clocks that need it. + */ + +/* + * Syscon clock I/O registers lock so clock requests don't collide + * NOTE: this is a local lock only used to lock access to clock and + * reset registers in syscon. + */ +static DEFINE_SPINLOCK(syscon_clkreg_lock); +static DEFINE_SPINLOCK(syscon_resetreg_lock); + +/* + * The clocking hierarchy currently looks like this. + * NOTE: the idea is NOT to show how the clocks are routed on the chip! + * The ideas is to show dependencies, so a clock higher up in the + * hierarchy has to be on in order for another clock to be on. Now, + * both CPU and DMA can actually be on top of the hierarchy, and that + * is not modeled currently. Instead we have the backbone AMBA bus on + * top. This bus cannot be programmed in any way but conceptually it + * needs to be active for the bridges and devices to transport data. + * + * Please be aware that a few clocks are hw controlled, which mean that + * the hw itself can turn on/off or change the rate of the clock when + * needed! + * + * AMBA bus + * | + * +- CPU + * +- NANDIF NAND Flash interface + * +- SEMI Shared Memory interface + * +- ISP Image Signal Processor (U335 only) + * +- CDS (U335 only) + * +- DMA Direct Memory Access Controller + * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) + * +- APEX + * +- VIDEO_ENC AVE2/3 Video Encoder + * +- XGAM Graphics Accelerator Controller + * +- AHB + * | + * +- ahb:0 AHB Bridge + * | | + * | +- ahb:1 INTCON Interrupt controller + * | +- ahb:3 MSPRO Memory Stick Pro controller + * | +- ahb:4 EMIF External Memory interface + * | + * +- fast:0 FAST bridge + * | | + * | +- fast:1 MMCSD MMC/SD card reader controller + * | +- fast:2 I2S0 PCM I2S channel 0 controller + * | +- fast:3 I2S1 PCM I2S channel 1 controller + * | +- fast:4 I2C0 I2C channel 0 controller + * | +- fast:5 I2C1 I2C channel 1 controller + * | +- fast:6 SPI SPI controller + * | +- fast:7 UART1 Secondary UART (U335 only) + * | + * +- slow:0 SLOW bridge + * | + * +- slow:1 SYSCON (not possible to control) + * +- slow:2 WDOG Watchdog + * +- slow:3 UART0 primary UART + * +- slow:4 TIMER_APP Application timer - used in Linux + * +- slow:5 KEYPAD controller + * +- slow:6 GPIO controller + * +- slow:7 RTC controller + * +- slow:8 BT Bus Tracer (not used currently) + * +- slow:9 EH Event Handler (not used currently) + * +- slow:a TIMER_ACC Access style timer (not used currently) + * +- slow:b PPM (U335 only, what is that?) + */ + +/* + * Reset control functions. We remember if a block has been + * taken out of reset and don't remove the reset assertion again + * and vice versa. Currently we only remove resets so the + * enablement function is defined out. + */ +static void syscon_block_reset_enable(struct clk *clk) +{ + u16 val; + unsigned long iflags; + + /* Not all blocks support resetting */ + if (!clk->res_reg || !clk->res_mask) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(clk->res_reg); + val |= clk->res_mask; + writew(val, clk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + clk->reset = true; +} + +static void syscon_block_reset_disable(struct clk *clk) +{ + u16 val; + unsigned long iflags; + + /* Not all blocks support resetting */ + if (!clk->res_reg || !clk->res_mask) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(clk->res_reg); + val &= ~clk->res_mask; + writew(val, clk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + clk->reset = false; +} + +int __clk_get(struct clk *clk) +{ + u16 val; + + /* The MMC and MSPRO clocks need some special set-up */ + if (!strcmp(clk->name, "MCLK")) { + /* Set default MMC clock divisor to 18.9 MHz */ + writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Disable MSPRO frequency */ + val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); + } + if (!strcmp(clk->name, "MSPRO")) { + val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Enable MSPRO frequency */ + val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); + } + return 1; +} +EXPORT_SYMBOL(__clk_get); + +void __clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(__clk_put); + +static void syscon_clk_disable(struct clk *clk) +{ + unsigned long iflags; + + /* Don't touch the hardware controlled clocks */ + if (clk->hw_ctrld) + return; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static void syscon_clk_enable(struct clk *clk) +{ + unsigned long iflags; + + /* Don't touch the hardware controlled clocks */ + if (clk->hw_ctrld) + return; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static u16 syscon_clk_get_rate(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); + return val; +} + +#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER +static void enable_i2s0_vcxo(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + /* Set I2S0 to use the VCXO 26 MHz clock */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val |= U300_SYSCON_CCR_TURN_VCXO_ON; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val |= U300_SYSCON_CCR_I2S0_USE_VCXO; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); + val |= U300_SYSCON_CEFR_I2S0_CLK_EN; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static void enable_i2s1_vcxo(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + /* Set I2S1 to use the VCXO 26 MHz clock */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val |= U300_SYSCON_CCR_TURN_VCXO_ON; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val |= U300_SYSCON_CCR_I2S1_USE_VCXO; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); + val |= U300_SYSCON_CEFR_I2S1_CLK_EN; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static void disable_i2s0_vcxo(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + /* Disable I2S0 use of the VCXO 26 MHz clock */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + /* Deactivate VCXO if noone else is using VCXO */ + if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) + val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); + val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +static void disable_i2s1_vcxo(void) +{ + u16 val; + unsigned long iflags; + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + /* Disable I2S1 use of the VCXO 26 MHz clock */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + /* Deactivate VCXO if noone else is using VCXO */ + if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) + val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); + val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} +#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */ + + +static void syscon_clk_rate_set_mclk(unsigned long rate) +{ + u16 val; + u32 reg; + unsigned long iflags; + + switch (rate) { + case 18900000: + val = 0x0054; + break; + case 20800000: + val = 0x0044; + break; + case 23100000: + val = 0x0043; + break; + case 26000000: + val = 0x0033; + break; + case 29700000: + val = 0x0032; + break; + case 34700000: + val = 0x0022; + break; + case 41600000: + val = 0x0021; + break; + case 52000000: + val = 0x0011; + break; + case 104000000: + val = 0x0000; + break; + default: + printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n", + rate); + return; + } + + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & + ~U300_SYSCON_MMF0R_MASK; + writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} + +void syscon_clk_rate_set_cpuclk(unsigned long rate) +{ + u16 val; + unsigned long iflags; + + switch (rate) { + case 13000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; + break; + case 52000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; + break; + case 104000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; + break; + case 208000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; + break; + default: + return; + } + spin_lock_irqsave(&syscon_clkreg_lock, iflags); + val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) & + ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); +} +EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk); + +void clk_disable(struct clk *clk) +{ + unsigned long iflags; + + spin_lock_irqsave(&clk->lock, iflags); + if (clk->usecount > 0 && !(--clk->usecount)) { + /* some blocks lack clocking registers and cannot be disabled */ + if (clk->disable) + clk->disable(clk); + if (likely((u32)clk->parent)) + clk_disable(clk->parent); + } +#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER + if (unlikely(!strcmp(clk->name, "I2S0"))) + disable_i2s0_vcxo(); + if (unlikely(!strcmp(clk->name, "I2S1"))) + disable_i2s1_vcxo(); +#endif + spin_unlock_irqrestore(&clk->lock, iflags); +} +EXPORT_SYMBOL(clk_disable); + +int clk_enable(struct clk *clk) +{ + int ret = 0; + unsigned long iflags; + + spin_lock_irqsave(&clk->lock, iflags); + if (clk->usecount++ == 0) { + if (likely((u32)clk->parent)) + ret = clk_enable(clk->parent); + + if (unlikely(ret != 0)) + clk->usecount--; + else { + /* remove reset line (we never enable reset again) */ + syscon_block_reset_disable(clk); + /* clocks without enable function are always on */ + if (clk->enable) + clk->enable(clk); +#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER + if (unlikely(!strcmp(clk->name, "I2S0"))) + enable_i2s0_vcxo(); + if (unlikely(!strcmp(clk->name, "I2S1"))) + enable_i2s1_vcxo(); +#endif + } + } + spin_unlock_irqrestore(&clk->lock, iflags); + return ret; + +} +EXPORT_SYMBOL(clk_enable); + +/* Returns the clock rate in Hz */ +static unsigned long clk_get_rate_cpuclk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + return 104000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 208000000; + default: + break; + } + return clk->rate; +} + +static unsigned long clk_get_rate_ahb_clk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 6500000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 26000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 52000000; + default: + break; + } + return clk->rate; + +} + +static unsigned long clk_get_rate_emif_clk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 104000000; + default: + break; + } + return clk->rate; + +} + +static unsigned long clk_get_rate_xgamclk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 6500000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 26000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 52000000; + default: + break; + } + + return clk->rate; +} + +static unsigned long clk_get_rate_mclk(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + /* + * Here, the 208 MHz PLL gets shut down and the always + * on 13 MHz PLL used for RTC etc kicks into use + * instead. + */ + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + { + /* + * This clock is under program control. The register is + * divided in two nybbles, bit 7-4 gives cycles-1 to count + * high, bit 3-0 gives cycles-1 to count low. Distribute + * these with no more than 1 cycle difference between + * low and high and add low and high to get the actual + * divisor. The base PLL is 208 MHz. Writing 0x00 will + * divide by 1 and 1 so the highest frequency possible + * is 104 MHz. + * + * e.g. 0x54 => + * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz + */ + u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & + U300_SYSCON_MMF0R_MASK; + switch (val) { + case 0x0054: + return 18900000; + case 0x0044: + return 20800000; + case 0x0043: + return 23100000; + case 0x0033: + return 26000000; + case 0x0032: + return 29700000; + case 0x0022: + return 34700000; + case 0x0021: + return 41600000; + case 0x0011: + return 52000000; + case 0x0000: + return 104000000; + default: + break; + } + } + default: + break; + } + + return clk->rate; +} + +static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk) +{ + u16 val; + + val = syscon_clk_get_rate(); + + switch (val) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + return 26000000; + default: + break; + } + + return clk->rate; +} + +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk->get_rate) + return clk->get_rate(clk); + else + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate) +{ + if (rate >= 18900000) + return 18900000; + if (rate >= 20800000) + return 20800000; + if (rate >= 23100000) + return 23100000; + if (rate >= 26000000) + return 26000000; + if (rate >= 29700000) + return 29700000; + if (rate >= 34700000) + return 34700000; + if (rate >= 41600000) + return 41600000; + if (rate >= 52000000) + return 52000000; + return -EINVAL; +} + +static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) +{ + if (rate >= 13000000) + return 13000000; + if (rate >= 52000000) + return 52000000; + if (rate >= 104000000) + return 104000000; + if (rate >= 208000000) + return 208000000; + return -EINVAL; +} + +/* + * This adjusts a requested rate to the closest exact rate + * a certain clock can provide. For a fixed clock it's + * mostly clk->rate. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */ + /* Else default to fixed value */ + + if (clk->round_rate) { + return (long) clk->round_rate(clk, rate); + } else { + printk(KERN_ERR "clock: Failed to round rate of %s\n", + clk->name); + } + return (long) clk->rate; +} +EXPORT_SYMBOL(clk_round_rate); + +static int clk_set_rate_mclk(struct clk *clk, unsigned long rate) +{ + syscon_clk_rate_set_mclk(clk_round_rate(clk, rate)); + return 0; +} + +static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate) +{ + syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate)); + return 0; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + /* TODO: set for EMIFCLK and AHBCLK */ + /* Else assume the clock is fixed and fail */ + if (clk->set_rate) { + return clk->set_rate(clk, rate); + } else { + printk(KERN_ERR "clock: Failed to set %s to %ld hz\n", + clk->name, rate); + return -EINVAL; + } +} +EXPORT_SYMBOL(clk_set_rate); + +/* + * Clock definitions. The clock parents are set to respective + * bridge and the clock framework makes sure that the clocks have + * parents activated and are brought out of reset when in use. + * + * Clocks that have hw_ctrld = true are hw controlled, and the hw + * can by itself turn these clocks on and off. + * So in other words, we don't really have to care about them. + */ + +static struct clk amba_clk = { + .name = "AMBA", + .rate = 52000000, /* this varies! */ + .hw_ctrld = true, + .reset = false, +}; + +/* + * These blocks are connected directly to the AMBA bus + * with no bridge. + */ + +static struct clk cpu_clk = { + .name = "CPU", + .parent = &amba_clk, + .rate = 208000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_CPU_RESET_EN, + .set_rate = clk_set_rate_cpuclk, + .get_rate = clk_get_rate_cpuclk, + .round_rate = clk_round_rate_cpuclk, +}; + +static struct clk nandif_clk = { + .name = "NANDIF", + .parent = &amba_clk, + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN, + .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk semi_clk = { + .name = "SEMI", + .parent = &amba_clk, + .rate = 0, /* FIXME */ + /* It is not possible to reset SEMI */ + .hw_ctrld = false, + .reset = false, + .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +#ifdef CONFIG_MACH_U300_BS335 +static struct clk isp_clk = { + .name = "ISP", + .parent = &amba_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_ISP_RESET_EN, + .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk cds_clk = { + .name = "CDS", + .parent = &amba_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_CDS_RESET_EN, + .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; +#endif + +static struct clk dma_clk = { + .name = "DMA", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN, + .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk aaif_clk = { + .name = "AAIF", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN, + .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk apex_clk = { + .name = "APEX", + .parent = &amba_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_APEX_RESET_EN, + .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk video_enc_clk = { + .name = "VIDEO_ENC", + .parent = &amba_clk, + .rate = 208000000, /* this varies! */ + .hw_ctrld = false, + .reset = false, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + /* This has XGAM in the name but refers to the video encoder */ + .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN, + .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk xgam_clk = { + .name = "XGAMCLK", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN, + .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, + .get_rate = clk_get_rate_xgamclk, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +/* This clock is used to activate the video encoder */ +static struct clk ahb_clk = { + .name = "AHB", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = false, /* This one is set to false due to HW bug */ + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_AHB_RESET_EN, + .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_ahb_clk, +}; + + +/* + * Clocks on the AHB bridge + */ + +static struct clk ahb_subsys_clk = { + .name = "AHB_SUBSYS", + .parent = &amba_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = true, + .reset = false, + .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_ahb_clk, +}; + +static struct clk intcon_clk = { + .name = "INTCON", + .parent = &ahb_subsys_clk, + .rate = 52000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, + /* INTCON can be reset but not clock-gated */ +}; + +static struct clk mspro_clk = { + .name = "MSPRO", + .parent = &ahb_subsys_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN, + .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk emif_clk = { + .name = "EMIF", + .parent = &ahb_subsys_clk, + .rate = 104000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, + .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN, + .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_emif_clk, +}; + + +/* + * Clocks on the FAST bridge + */ +static struct clk fast_clk = { + .name = "FAST_BRIDGE", + .parent = &amba_clk, + .rate = 13000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk mmcsd_clk = { + .name = "MCLK", + .parent = &fast_clk, + .rate = 18900000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, + .get_rate = clk_get_rate_mclk, + .set_rate = clk_set_rate_mclk, + .round_rate = clk_round_rate_mclk, + .disable = syscon_clk_disable, + .enable = syscon_clk_enable, +}; + +static struct clk i2s0_clk = { + .name = "i2s0", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +static struct clk i2s1_clk = { + .name = "i2s1", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +static struct clk i2c0_clk = { + .name = "I2C0", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +static struct clk i2c1_clk = { + .name = "I2C1", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +static struct clk spi_clk = { + .name = "SPI", + .parent = &fast_clk, + .rate = 26000000, /* this varies! */ + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .get_rate = clk_get_rate_i2s_i2c_spi, +}; + +#ifdef CONFIG_MACH_U300_BS335 +static struct clk uart1_clk = { + .name = "UART1", + .parent = &fast_clk, + .rate = 13000000, + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, + .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE, + .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; +#endif + + +/* + * Clocks on the SLOW bridge + */ +static struct clk slow_clk = { + .name = "SLOW_BRIDGE", + .parent = &amba_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN, + .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +/* TODO: implement SYSCON clock? */ + +static struct clk wdog_clk = { + .name = "WDOG", + .parent = &slow_clk, + .hw_ctrld = false, + .rate = 32768, + .reset = false, + /* This is always on, cannot be enabled/disabled or reset */ +}; + +/* This one is hardwired to PLL13 */ +static struct clk uart_clk = { + .name = "UARTCLK", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_UART_RESET_EN, + .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk keypad_clk = { + .name = "KEYPAD", + .parent = &slow_clk, + .rate = 32768, + .hw_ctrld = false, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN, + .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk gpio_clk = { + .name = "GPIO", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN, + .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk rtc_clk = { + .name = "RTC", + .parent = &slow_clk, + .rate = 32768, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, + /* This clock is always on, cannot be enabled/disabled */ +}; + +static struct clk bustr_clk = { + .name = "BUSTR", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_BTR_RESET_EN, + .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk evhist_clk = { + .name = "EVHIST", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_EH_RESET_EN, + .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk timer_clk = { + .name = "TIMER", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN, + .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +static struct clk app_timer_clk = { + .name = "TIMER_APP", + .parent = &slow_clk, + .rate = 13000000, + .hw_ctrld = true, + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN, + .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; + +#ifdef CONFIG_MACH_U300_BS335 +static struct clk ppm_clk = { + .name = "PPM", + .parent = &slow_clk, + .rate = 0, /* FIXME */ + .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */ + .reset = true, + .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, + .res_mask = U300_SYSCON_RSR_PPM_RESET_EN, + .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, +}; +#endif + +#define DEF_LOOKUP(devid, clkref) \ + { \ + .dev_id = devid, \ + .clk = clkref, \ + } + +/* + * Here we only define clocks that are meaningful to + * look up through clockdevice. + */ +static struct clk_lookup lookups[] = { + /* Connected directly to the AMBA bus */ + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("nandif", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), +#ifdef CONFIG_MACH_U300_BS335 + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), +#endif + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("aaif", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("video_enc", &video_enc_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), + /* AHB bridge clocks */ + DEF_LOOKUP("ahb", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), + /* FAST bridge clocks */ + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), + /* + * The .0 and .1 identifiers on these comes from the platform device + * .id field and are assigned when the platform devices are registered. + */ + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stddci2c.0", &i2c0_clk), + DEF_LOOKUP("stddci2c.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), +#ifdef CONFIG_MACH_U300_BS335 + DEF_LOOKUP("uart1", &uart1_clk), +#endif + /* SLOW bridge clocks */ + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("u300-gpio", &gpio_clk), + DEF_LOOKUP("rtc0", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), +#ifdef CONFIG_MACH_U300_BS335 + DEF_LOOKUP("ppm", &ppm_clk), +#endif +}; + +static void __init clk_register(void) +{ + int i; + + /* Register the lookups */ + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); +} + +/* + * These are the clocks for cells registered as primecell drivers + * on the AMBA bus. These must be on during AMBA device registration + * since the bus probe will attempt to read magic configuration + * registers for these devices. If they are deactivated these probes + * will fail. + * + * + * Please note that on emif, both RAM and NAND is connected in dual + * RAM phones. On single RAM phones, ram is on semi and NAND on emif. + * + */ +void u300_clock_primecells(void) +{ + clk_enable(&intcon_clk); + clk_enable(&uart_clk); +#ifdef CONFIG_MACH_U300_BS335 + clk_enable(&uart1_clk); +#endif + clk_enable(&spi_clk); + + clk_enable(&mmcsd_clk); + +} +EXPORT_SYMBOL(u300_clock_primecells); + +void u300_unclock_primecells(void) +{ + + clk_disable(&intcon_clk); + clk_disable(&uart_clk); +#ifdef CONFIG_MACH_U300_BS335 + clk_disable(&uart1_clk); +#endif + clk_disable(&spi_clk); + clk_disable(&mmcsd_clk); + +} +EXPORT_SYMBOL(u300_unclock_primecells); + +/* + * The interrupt controller is enabled before the clock API is registered. + */ +void u300_enable_intcon_clock(void) +{ + clk_enable(&intcon_clk); +} +EXPORT_SYMBOL(u300_enable_intcon_clock); + +/* + * The timer is enabled before the clock API is registered. + */ +void u300_enable_timer_clock(void) +{ + clk_enable(&app_timer_clk); +} +EXPORT_SYMBOL(u300_enable_timer_clock); + +#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) +/* + * The following makes it possible to view the status (especially + * reference count and reset status) for the clocks in the platform + * by looking into the special file <debugfs>/u300_clocks + */ + +/* A list of all clocks in the platform */ +static struct clk *clks[] = { + /* Top node clock for the AMBA bus */ + &amba_clk, + /* Connected directly to the AMBA bus */ + &cpu_clk, + &nandif_clk, + &semi_clk, +#ifdef CONFIG_MACH_U300_BS335 + &isp_clk, + &cds_clk, +#endif + &dma_clk, + &aaif_clk, + &apex_clk, + &video_enc_clk, + &xgam_clk, + &ahb_clk, + + /* AHB bridge clocks */ + &ahb_subsys_clk, + &intcon_clk, + &mspro_clk, + &emif_clk, + /* FAST bridge clocks */ + &fast_clk, + &mmcsd_clk, + &i2s0_clk, + &i2s1_clk, + &i2c0_clk, + &i2c1_clk, + &spi_clk, +#ifdef CONFIG_MACH_U300_BS335 + &uart1_clk, +#endif + /* SLOW bridge clocks */ + &slow_clk, + &wdog_clk, + &uart_clk, + &app_timer_clk, + &keypad_clk, + &gpio_clk, + &rtc_clk, + &bustr_clk, + &evhist_clk, + &timer_clk, +#ifdef CONFIG_MACH_U300_BS335 + &ppm_clk, +#endif +}; + +static int u300_clocks_show(struct seq_file *s, void *data) +{ + struct clk *clk; + int i; + + seq_printf(s, "CLOCK DEVICE RESET STATE\t" \ + "ACTIVE\tUSERS\tHW CTRL FREQ\n"); + seq_printf(s, "---------------------------------------------" \ + "-----------------------------------------\n"); + for (i = 0; i < ARRAY_SIZE(clks); i++) { + clk = clks[i]; + if (clk != ERR_PTR(-ENOENT)) { + /* Format clock and device name nicely */ + char cdp[33]; + int chars; + + chars = snprintf(&cdp[0], 17, "%s", clk->name); + while (chars < 16) { + cdp[chars] = ' '; + chars++; + } + chars = snprintf(&cdp[16], 17, "%s", clk->dev ? + dev_name(clk->dev) : "N/A"); + while (chars < 16) { + cdp[chars+16] = ' '; + chars++; + } + cdp[32] = '\0'; + if (clk->get_rate) + seq_printf(s, + "%s%s\t%s\t%d\t%s\t%lu Hz\n", + &cdp[0], + clk->reset ? + "ASSERTED" : "RELEASED", + clk->usecount ? "ON" : "OFF", + clk->usecount, + clk->hw_ctrld ? "YES" : "NO ", + clk->get_rate(clk)); + else + seq_printf(s, + "%s%s\t%s\t%d\t%s\t" \ + "(unknown rate)\n", + &cdp[0], + clk->reset ? + "ASSERTED" : "RELEASED", + clk->usecount ? "ON" : "OFF", + clk->usecount, + clk->hw_ctrld ? "YES" : "NO "); + } + } + return 0; +} + +static int u300_clocks_open(struct inode *inode, struct file *file) +{ + return single_open(file, u300_clocks_show, NULL); +} + +static const struct file_operations u300_clocks_operations = { + .open = u300_clocks_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void init_clk_read_procfs(void) +{ + /* Expose a simple debugfs interface to view all clocks */ + (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, + NULL, NULL, &u300_clocks_operations); +} +#else +static inline void init_clk_read_procfs(void) +{ +} +#endif + +static int __init u300_clock_init(void) +{ + u16 val; + + /* + * FIXME: shall all this powermanagement stuff really live here??? + */ + + /* Set system to run at PLL208, max performance, a known state. */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + /* Wait for the PLL208 to lock if not locked in yet */ + while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & + U300_SYSCON_CSR_PLL208_LOCK_IND)); + + /* Power management enable */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); + val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); + + clk_register(); + + init_clk_read_procfs(); + + /* + * Some of these may be on when we boot the system so make sure they + * are turned OFF. + */ + syscon_block_reset_enable(&timer_clk); + timer_clk.disable(&timer_clk); + + /* + * These shall be turned on by default when we boot the system + * so make sure they are ON. (Adding CPU here is a bit too much.) + * These clocks will be claimed by drivers later. + */ + syscon_block_reset_disable(&semi_clk); + syscon_block_reset_disable(&emif_clk); + semi_clk.enable(&semi_clk); + emif_clk.enable(&emif_clk); + + return 0; +} +/* initialize clocking early to be available later in the boot */ +core_initcall(u300_clock_init); diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h new file mode 100644 index 000000000000..fc6d9ccfe7e3 --- /dev/null +++ b/arch/arm/mach-u300/clock.h @@ -0,0 +1,53 @@ +/* + * arch/arm/mach-u300/include/mach/clock.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * Copyright (C) 2007-2009 ST-Ericsson AB + * Adopted to ST-Ericsson U300 platforms by + * Jonas Aaberg <jonas.aberg@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __MACH_CLOCK_H +#define __MACH_CLOCK_H + +#include <linux/clk.h> + +struct clk { + struct list_head node; + struct module *owner; + struct device *dev; + const char *name; + struct clk *parent; + + spinlock_t lock; + unsigned long rate; + bool reset; + __u16 clk_val; + __s8 usecount; + __u32 res_reg; + __u16 res_mask; + + bool hw_ctrld; + + void (*recalc) (struct clk *); + int (*set_rate) (struct clk *, unsigned long); + unsigned long (*get_rate) (struct clk *); + unsigned long (*round_rate) (struct clk *, unsigned long); + void (*init) (struct clk *); + void (*enable) (struct clk *); + void (*disable) (struct clk *); +}; + +void u300_clock_primecells(void); +void u300_unclock_primecells(void); +void u300_enable_intcon_clock(void); +void u300_enable_timer_clock(void); + +#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c new file mode 100644 index 000000000000..89b3ccf35e1b --- /dev/null +++ b/arch/arm/mach-u300/core.c @@ -0,0 +1,649 @@ +/* + * + * arch/arm/mach-u300/core.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Core platform support, IRQ handling and device definitions. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/termios.h> +#include <linux/amba/bus.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware/vic.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/syscon.h> + +#include "clock.h" +#include "mmc.h" + +/* + * Static I/O mappings that are needed for booting the U300 platforms. The + * only things we need are the areas where we find the timer, syscon and + * intcon, since the remaining device drivers will map their own memory + * physical to virtual as the need arise. + */ +static struct map_desc u300_io_desc[] __initdata = { + { + .virtual = U300_SLOW_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE), + .length = SZ_64K, + .type = MT_DEVICE, + }, + { + .virtual = U300_AHB_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE), + .length = SZ_32K, + .type = MT_DEVICE, + }, + { + .virtual = U300_FAST_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE), + .length = SZ_32K, + .type = MT_DEVICE, + }, + { + .virtual = 0xffff2000, /* TCM memory */ + .pfn = __phys_to_pfn(0xffff2000), + .length = SZ_16K, + .type = MT_DEVICE, + }, + + /* + * This overlaps with the IRQ vectors etc at 0xffff0000, so these + * may have to be moved to 0x00000000 in order to use the ROM. + */ + /* + { + .virtual = U300_BOOTROM_VIRT_BASE, + .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE), + .length = SZ_64K, + .type = MT_ROM, + }, + */ +}; + +void __init u300_map_io(void) +{ + iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); +} + +/* + * Declaration of devices found on the U300 board and + * their respective memory locations. + */ +static struct amba_device uart0_device = { + .dev = { + .init_name = "uart0", /* Slow device at 0x3000 offset */ + .platform_data = NULL, + }, + .res = { + .start = U300_UART0_BASE, + .end = U300_UART0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_U300_UART0, NO_IRQ }, +}; + +/* The U335 have an additional UART1 on the APP CPU */ +#ifdef CONFIG_MACH_U300_BS335 +static struct amba_device uart1_device = { + .dev = { + .init_name = "uart1", /* Fast device at 0x7000 offset */ + .platform_data = NULL, + }, + .res = { + .start = U300_UART1_BASE, + .end = U300_UART1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_U300_UART1, NO_IRQ }, +}; +#endif + +static struct amba_device pl172_device = { + .dev = { + .init_name = "pl172", /* AHB device at 0x4000 offset */ + .platform_data = NULL, + }, + .res = { + .start = U300_EMIF_CFG_BASE, + .end = U300_EMIF_CFG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + + +/* + * Everything within this next ifdef deals with external devices connected to + * the APP SPI bus. + */ +static struct amba_device pl022_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "pl022", /* Fast device at 0x6000 offset */ + }, + .res = { + .start = U300_SPI_BASE, + .end = U300_SPI_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_U300_SPI, NO_IRQ }, + /* + * This device has a DMA channel but the Linux driver does not use + * it currently. + */ +}; + +static struct amba_device mmcsd_device = { + .dev = { + .init_name = "mmci", /* Fast device at 0x1000 offset */ + .platform_data = NULL, /* Added later */ + }, + .res = { + .start = U300_MMCSD_BASE, + .end = U300_MMCSD_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }, + /* + * This device has a DMA channel but the Linux driver does not use + * it currently. + */ +}; + +/* + * The order of device declaration may be important, since some devices + * have dependencies on other devices being initialized first. + */ +static struct amba_device *amba_devs[] __initdata = { + &uart0_device, +#ifdef CONFIG_MACH_U300_BS335 + &uart1_device, +#endif + &pl022_device, + &pl172_device, + &mmcsd_device, +}; + +/* Here follows a list of all hw resources that the platform devices + * allocate. Note, clock dependencies are not included + */ + +static struct resource gpio_resources[] = { + { + .start = U300_GPIO_BASE, + .end = (U300_GPIO_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + { + .name = "gpio0", + .start = IRQ_U300_GPIO_PORT0, + .end = IRQ_U300_GPIO_PORT0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "gpio1", + .start = IRQ_U300_GPIO_PORT1, + .end = IRQ_U300_GPIO_PORT1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "gpio2", + .start = IRQ_U300_GPIO_PORT2, + .end = IRQ_U300_GPIO_PORT2, + .flags = IORESOURCE_IRQ, + }, +#ifdef U300_COH901571_3 + { + .name = "gpio3", + .start = IRQ_U300_GPIO_PORT3, + .end = IRQ_U300_GPIO_PORT3, + .flags = IORESOURCE_IRQ, + }, + { + .name = "gpio4", + .start = IRQ_U300_GPIO_PORT4, + .end = IRQ_U300_GPIO_PORT4, + .flags = IORESOURCE_IRQ, + }, +#ifdef CONFIG_MACH_U300_BS335 + { + .name = "gpio5", + .start = IRQ_U300_GPIO_PORT5, + .end = IRQ_U300_GPIO_PORT5, + .flags = IORESOURCE_IRQ, + }, + { + .name = "gpio6", + .start = IRQ_U300_GPIO_PORT6, + .end = IRQ_U300_GPIO_PORT6, + .flags = IORESOURCE_IRQ, + }, +#endif /* CONFIG_MACH_U300_BS335 */ +#endif /* U300_COH901571_3 */ +}; + +static struct resource keypad_resources[] = { + { + .start = U300_KEYPAD_BASE, + .end = U300_KEYPAD_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "coh901461-press", + .start = IRQ_U300_KEYPAD_KEYBF, + .end = IRQ_U300_KEYPAD_KEYBF, + .flags = IORESOURCE_IRQ, + }, + { + .name = "coh901461-release", + .start = IRQ_U300_KEYPAD_KEYBR, + .end = IRQ_U300_KEYPAD_KEYBR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource rtc_resources[] = { + { + .start = U300_RTC_BASE, + .end = U300_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_U300_RTC, + .end = IRQ_U300_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +/* + * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2) + * but these are not yet used by the driver. + */ +static struct resource fsmc_resources[] = { + { + .start = U300_NAND_IF_PHYS_BASE, + .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource i2c0_resources[] = { + { + .start = U300_I2C0_BASE, + .end = U300_I2C0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_U300_I2C0, + .end = IRQ_U300_I2C0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource i2c1_resources[] = { + { + .start = U300_I2C1_BASE, + .end = U300_I2C1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_U300_I2C1, + .end = IRQ_U300_I2C1, + .flags = IORESOURCE_IRQ, + }, + +}; + +static struct resource wdog_resources[] = { + { + .start = U300_WDOG_BASE, + .end = U300_WDOG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_U300_WDOG, + .end = IRQ_U300_WDOG, + .flags = IORESOURCE_IRQ, + } +}; + +/* TODO: These should be protected by suitable #ifdef's */ +static struct resource ave_resources[] = { + { + .name = "AVE3e I/O Area", + .start = U300_VIDEOENC_BASE, + .end = U300_VIDEOENC_BASE + SZ_512K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "AVE3e IRQ0", + .start = IRQ_U300_VIDEO_ENC_0, + .end = IRQ_U300_VIDEO_ENC_0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "AVE3e IRQ1", + .start = IRQ_U300_VIDEO_ENC_1, + .end = IRQ_U300_VIDEO_ENC_1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "AVE3e Physmem Area", + .start = 0, /* 0 will be remapped to reserved memory */ + .end = SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + /* + * The AVE3e requires two regions of 256MB that it considers + * "invisible". The hardware will not be able to access these + * adresses, so they should never point to system RAM. + */ + { + .name = "AVE3e Reserved 0", + .start = 0xd0000000, + .end = 0xd0000000 + SZ_256M - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "AVE3e Reserved 1", + .start = 0xe0000000, + .end = 0xe0000000 + SZ_256M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device wdog_device = { + .name = "wdog", + .id = -1, + .num_resources = ARRAY_SIZE(wdog_resources), + .resource = wdog_resources, +}; + +static struct platform_device i2c0_device = { + .name = "stddci2c", + .id = 0, + .num_resources = ARRAY_SIZE(i2c0_resources), + .resource = i2c0_resources, +}; + +static struct platform_device i2c1_device = { + .name = "stddci2c", + .id = 1, + .num_resources = ARRAY_SIZE(i2c1_resources), + .resource = i2c1_resources, +}; + +static struct platform_device gpio_device = { + .name = "u300-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(gpio_resources), + .resource = gpio_resources, +}; + +static struct platform_device keypad_device = { + .name = "keypad", + .id = -1, + .num_resources = ARRAY_SIZE(keypad_resources), + .resource = keypad_resources, +}; + +static struct platform_device rtc_device = { + .name = "rtc0", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct platform_device fsmc_device = { + .name = "nandif", + .id = -1, + .num_resources = ARRAY_SIZE(fsmc_resources), + .resource = fsmc_resources, +}; + +static struct platform_device ave_device = { + .name = "video_enc", + .id = -1, + .num_resources = ARRAY_SIZE(ave_resources), + .resource = ave_resources, +}; + +/* + * Notice that AMBA devices are initialized before platform devices. + * + */ +static struct platform_device *platform_devs[] __initdata = { + &i2c0_device, + &i2c1_device, + &keypad_device, + &rtc_device, + &gpio_device, + &fsmc_device, + &wdog_device, + &ave_device +}; + + +/* + * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected + * together so some interrupts are connected to the first one and some + * to the second one. + */ +void __init u300_init_irq(void) +{ + u32 mask[2] = {0, 0}; + int i; + + for (i = 0; i < NR_IRQS; i++) + set_bit(i, (unsigned long *) &mask[0]); + u300_enable_intcon_clock(); + vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0); + vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0); +} + + +/* + * U300 platforms peripheral handling + */ +struct db_chip { + u16 chipid; + const char *name; +}; + +/* + * This is a list of the Digital Baseband chips used in the U300 platform. + */ +static struct db_chip db_chips[] __initdata = { + { + .chipid = 0xb800, + .name = "DB3000", + }, + { + .chipid = 0xc000, + .name = "DB3100", + }, + { + .chipid = 0xc800, + .name = "DB3150", + }, + { + .chipid = 0xd800, + .name = "DB3200", + }, + { + .chipid = 0xe000, + .name = "DB3250", + }, + { + .chipid = 0xe800, + .name = "DB3210", + }, + { + .chipid = 0xf000, + .name = "DB3350 P1x", + }, + { + .chipid = 0xf100, + .name = "DB3350 P2x", + }, + { + .chipid = 0x0000, /* List terminator */ + .name = NULL, + } +}; + +static void u300_init_check_chip(void) +{ + + u16 val; + struct db_chip *chip; + const char *chipname; + const char unknown[] = "UNKNOWN"; + + /* Read out and print chip ID */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR); + /* This is in funky bigendian order... */ + val = (val & 0xFFU) << 8 | (val >> 8); + chip = db_chips; + chipname = unknown; + + for ( ; chip->chipid; chip++) { + if (chip->chipid == (val & 0xFF00U)) { + chipname = chip->name; + break; + } + } + printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ + "(chip ID 0x%04x)\n", chipname, val); + +#ifdef CONFIG_MACH_U300_BS26 + if ((val & 0xFF00U) != 0xc800) { + printk(KERN_ERR "Platform configured for BS25/BS26 " \ + "with DB3150 but %s detected, expect problems!", + chipname); + } +#endif +#ifdef CONFIG_MACH_U300_BS330 + if ((val & 0xFF00U) != 0xd800) { + printk(KERN_ERR "Platform configured for BS330 " \ + "with DB3200 but %s detected, expect problems!", + chipname); + } +#endif +#ifdef CONFIG_MACH_U300_BS335 + if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { + printk(KERN_ERR "Platform configured for BS365 " \ + " with DB3350 but %s detected, expect problems!", + chipname); + } +#endif +#ifdef CONFIG_MACH_U300_BS365 + if ((val & 0xFF00U) != 0xe800) { + printk(KERN_ERR "Platform configured for BS365 " \ + "with DB3210 but %s detected, expect problems!", + chipname); + } +#endif + + +} + +/* + * Some devices and their resources require reserved physical memory from + * the end of the available RAM. This function traverses the list of devices + * and assigns actual adresses to these. + */ +static void __init u300_assign_physmem(void) +{ + unsigned long curr_start = __pa(high_memory); + int i, j; + + for (i = 0; i < ARRAY_SIZE(platform_devs); i++) { + for (j = 0; j < platform_devs[i]->num_resources; j++) { + struct resource *const res = + &platform_devs[i]->resource[j]; + + if (IORESOURCE_MEM == res->flags && + 0 == res->start) { + res->start = curr_start; + res->end += curr_start; + curr_start += (res->end - res->start + 1); + + printk(KERN_INFO "core.c: Mapping RAM " \ + "%#x-%#x to device %s:%s\n", + res->start, res->end, + platform_devs[i]->name, res->name); + } + } + } +} + +void __init u300_init_devices(void) +{ + int i; + u16 val; + + /* Check what platform we run and print some status information */ + u300_init_check_chip(); + + /* Set system to run at PLL208, max performance, a known state. */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); + /* Wait for the PLL208 to lock if not locked in yet */ + while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & + U300_SYSCON_CSR_PLL208_LOCK_IND)); + + /* Register the AMBA devices in the AMBA bus abstraction layer */ + u300_clock_primecells(); + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + u300_unclock_primecells(); + + u300_assign_physmem(); + + /* Register the platform devices */ + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + +#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED + /* + * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when + * both subsystems are requesting this mode. + * If we not share the Acc SDRAM, this is never the case. Therefore + * enable it here from the App side. + */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) | + U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR); +#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */ +} + +static int core_module_init(void) +{ + /* + * This needs to be initialized later: it needs the input framework + * to be initialized first. + */ + return mmc_init(&mmcsd_device); +} +module_init(core_module_init); diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c new file mode 100644 index 000000000000..308cdb197a92 --- /dev/null +++ b/arch/arm/mach-u300/gpio.c @@ -0,0 +1,703 @@ +/* + * + * arch/arm/mach-u300/gpio.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * U300 GPIO module. + * This can driver either of the two basic GPIO cores + * available in the U300 platforms: + * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) + * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) + * Notice that you also have inline macros in <asm-arch/gpio.h> + * Author: Linus Walleij <linus.walleij@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + * + */ +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +/* Need access to SYSCON registers for PADmuxing */ +#include <mach/syscon.h> + +#include "padmux.h" + +/* Reference to GPIO block clock */ +static struct clk *clk; + +/* Memory resource */ +static struct resource *memres; +static void __iomem *virtbase; +static struct device *gpiodev; + +struct u300_gpio_port { + const char *name; + int irq; + int number; +}; + + +static struct u300_gpio_port gpio_ports[] = { + { + .name = "gpio0", + .number = 0, + }, + { + .name = "gpio1", + .number = 1, + }, + { + .name = "gpio2", + .number = 2, + }, +#ifdef U300_COH901571_3 + { + .name = "gpio3", + .number = 3, + }, + { + .name = "gpio4", + .number = 4, + }, +#ifdef CONFIG_MACH_U300_BS335 + { + .name = "gpio5", + .number = 5, + }, + { + .name = "gpio6", + .number = 6, + }, +#endif +#endif + +}; + + +#ifdef U300_COH901571_3 + +/* Default input value */ +#define DEFAULT_OUTPUT_LOW 0 +#define DEFAULT_OUTPUT_HIGH 1 + +/* GPIO Pull-Up status */ +#define DISABLE_PULL_UP 0 +#define ENABLE_PULL_UP 1 + +#define GPIO_NOT_USED 0 +#define GPIO_IN 1 +#define GPIO_OUT 2 + +struct u300_gpio_configuration_data { + unsigned char pin_usage; + unsigned char default_output_value; + unsigned char pull_up; +}; + +/* Initial configuration */ +const struct u300_gpio_configuration_data +u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { +#ifdef CONFIG_MACH_U300_BS335 + /* Port 0, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 1, pins 0-7 */ + { + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 2, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 3, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 4, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 5, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 6, pind 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + } +#endif + +#ifdef CONFIG_MACH_U300_BS365 + /* Port 0, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 1, pins 0-7 */ + { + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 2, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 3, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 4, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + /* These 4 pins doesn't exist on DB3210 */ + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + } +#endif +}; +#endif + + +/* No users == we can power down GPIO */ +static int gpio_users; + +struct gpio_struct { + int (*callback)(void *); + void *data; + int users; +}; + +static struct gpio_struct gpio_pin[U300_GPIO_MAX]; + +/* + * Let drivers register callback in order to get notified when there is + * an interrupt on the gpio pin + */ +int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data) +{ + if (gpio_pin[gpio].callback) + dev_warn(gpiodev, "%s: WARNING: callback already " + "registered for gpio pin#%d\n", __func__, gpio); + gpio_pin[gpio].callback = func; + gpio_pin[gpio].data = data; + + return 0; +} +EXPORT_SYMBOL(gpio_register_callback); + +int gpio_unregister_callback(unsigned gpio) +{ + if (!gpio_pin[gpio].callback) + dev_warn(gpiodev, "%s: WARNING: callback already " + "unregistered for gpio pin#%d\n", __func__, gpio); + gpio_pin[gpio].callback = NULL; + gpio_pin[gpio].data = NULL; + + return 0; +} +EXPORT_SYMBOL(gpio_unregister_callback); + +int gpio_request(unsigned gpio, const char *label) +{ + if (gpio_pin[gpio].users) + return -EINVAL; + else + gpio_pin[gpio].users++; + + gpio_users++; + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned gpio) +{ + gpio_users--; + gpio_pin[gpio].users--; + if (unlikely(gpio_pin[gpio].users < 0)) { + dev_warn(gpiodev, "warning: gpio#%d release mismatch\n", + gpio); + gpio_pin[gpio].users = 0; + } + + return; +} +EXPORT_SYMBOL(gpio_free); + +/* This returns zero or nonzero */ +int gpio_get_value(unsigned gpio) +{ + return readl(virtbase + U300_GPIO_PXPDIR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07)); +} +EXPORT_SYMBOL(gpio_get_value); + +/* + * We hope that the compiler will optimize away the unused branch + * in case "value" is a constant + */ +void gpio_set_value(unsigned gpio, int value) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + if (value) { + /* set */ + val = readl(virtbase + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) + & (1 << (gpio & 0x07)); + writel(val | (1 << (gpio & 0x07)), virtbase + + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } else { + /* clear */ + val = readl(virtbase + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) + & (1 << (gpio & 0x07)); + writel(val & ~(1 << (gpio & 0x07)), virtbase + + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_set_value); + +int gpio_direction_input(unsigned gpio) +{ + unsigned long flags; + u32 val; + + if (gpio > U300_GPIO_MAX) + return -EINVAL; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + /* Mask out this pin*/ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); + /* This is not needed since it sets the bits to zero.*/ + /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */ + writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned gpio, int value) +{ + unsigned long flags; + u32 val; + + if (gpio > U300_GPIO_MAX) + return -EINVAL; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + /* Mask out this pin */ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); + /* + * FIXME: configure for push/pull, open drain or open source per pin + * in setup. The current driver will only support push/pull. + */ + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL + << ((gpio & 0x07) << 1)); + writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + gpio_set_value(gpio, value); + local_irq_restore(flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +/* + * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0). + */ +void enable_irq_on_gpio_pin(unsigned gpio, int edge) +{ + u32 val; + unsigned long flags; + local_irq_save(flags); + + val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val |= (1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + if (edge) + val |= (1 << (gpio & 0x07)); + else + val &= ~(1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); +} +EXPORT_SYMBOL(enable_irq_on_gpio_pin); + +void disable_irq_on_gpio_pin(unsigned gpio) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val &= ~(1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); +} +EXPORT_SYMBOL(disable_irq_on_gpio_pin); + +/* Enable (value == 0) or disable (value == 1) internal pullup */ +void gpio_pullup(unsigned gpio, int value) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + if (value) { + val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } else { + val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_pullup); + +static irqreturn_t gpio_irq_handler(int irq, void *dev_id) +{ + struct u300_gpio_port *port = dev_id; + u32 val; + int pin; + + /* Read event register */ + val = readl(virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Mask with enable register */ + val &= readl(virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Mask relevant bits */ + val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK; + /* ACK IRQ (clear event) */ + writel(val, virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Print message */ + while (val != 0) { + unsigned gpio; + + pin = __ffs(val); + /* mask off this pin */ + val &= ~(1 << pin); + gpio = (port->number << 3) + pin; + + if (gpio_pin[gpio].callback) + (void)gpio_pin[gpio].callback(gpio_pin[gpio].data); + else + dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n", + gpio); + } + return IRQ_HANDLED; +} + +static void gpio_set_initial_values(void) +{ +#ifdef U300_COH901571_3 + int i, j; + unsigned long flags; + u32 val; + + /* Write default values to all pins */ + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { + val = 0; + for (j = 0; j < 8; j++) + val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j; + local_irq_save(flags); + writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } + + /* + * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' + * to output and 'GPIO_IN' to input for each port. And initalize + * default value on outputs. + */ + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { + for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) { + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + + i * U300_GPIO_PORTX_SPACING); + /* Mask out this pin */ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1)); + + if (u300_gpio_config[i][j].pin_usage != GPIO_IN) + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1)); + writel(val, virtbase + U300_GPIO_PXPCR + + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } + } + + /* Enable or disable the internal pull-ups in the GPIO ASIC block */ + for (i = 0; i < U300_GPIO_MAX; i++) { + val = 0; + for (j = 0; j < 8; j++) + val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j; + local_irq_save(flags); + writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } +#endif +} + +static int __init gpio_probe(struct platform_device *pdev) +{ + u32 val; + int err = 0; + int i; + int num_irqs; + + gpiodev = &pdev->dev; + memset(gpio_pin, 0, sizeof(gpio_pin)); + + /* Get GPIO clock */ + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + dev_err(gpiodev, "could not get GPIO clock\n"); + goto err_no_clk; + } + err = clk_enable(clk); + if (err) { + dev_err(gpiodev, "could not enable GPIO clock\n"); + goto err_no_clk_enable; + } + + memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!memres) + goto err_no_resource; + + if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller") + == NULL) { + err = -ENODEV; + goto err_no_ioregion; + } + + virtbase = ioremap(memres->start, resource_size(memres)); + if (!virtbase) { + err = -ENOMEM; + goto err_no_ioremap; + } + dev_info(gpiodev, "remapped 0x%08x to %p\n", + memres->start, virtbase); + +#ifdef U300_COH901335 + dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n"); + /* Turn on the GPIO block */ + writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR); +#endif + +#ifdef U300_COH901571_3 + dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n"); + val = readl(virtbase + U300_GPIO_CR); + dev_info(gpiodev, "COH901571/3 block version: %d, " \ + "number of cores: %d\n", + ((val & 0x0000FE00) >> 9), + ((val & 0x000001FC) >> 2)); + writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); +#endif + + /* Set up some padmuxing here */ +#ifdef CONFIG_MMC + pmx_set_mission_mode_mmc(); +#endif +#ifdef CONFIG_SPI_PL022 + pmx_set_mission_mode_spi(); +#endif + + gpio_set_initial_values(); + + for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { + + gpio_ports[num_irqs].irq = + platform_get_irq_byname(pdev, + gpio_ports[num_irqs].name); + + err = request_irq(gpio_ports[num_irqs].irq, + gpio_irq_handler, IRQF_DISABLED, + gpio_ports[num_irqs].name, + &gpio_ports[num_irqs]); + if (err) { + dev_err(gpiodev, "cannot allocate IRQ for %s!\n", + gpio_ports[num_irqs].name); + goto err_no_irq; + } + /* Turns off PortX_irq_force */ + writel(0x0, virtbase + U300_GPIO_PXIFR + + num_irqs * U300_GPIO_PORTX_SPACING); + } + + return 0; + + err_no_irq: + for (i = 0; i < num_irqs; i++) + free_irq(gpio_ports[i].irq, &gpio_ports[i]); + iounmap(virtbase); + err_no_ioremap: + release_mem_region(memres->start, memres->end - memres->start); + err_no_ioregion: + err_no_resource: + clk_disable(clk); + err_no_clk_enable: + clk_put(clk); + err_no_clk: + dev_info(gpiodev, "module ERROR:%d\n", err); + return err; +} + +static int __exit gpio_remove(struct platform_device *pdev) +{ + int i; + + /* Turn off the GPIO block */ + writel(0x00000000U, virtbase + U300_GPIO_CR); + for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++) + free_irq(gpio_ports[i].irq, &gpio_ports[i]); + iounmap(virtbase); + release_mem_region(memres->start, memres->end - memres->start); + clk_disable(clk); + clk_put(clk); + return 0; +} + +static struct platform_driver gpio_driver = { + .driver = { + .name = "u300-gpio", + }, + .remove = __exit_p(gpio_remove), +}; + + +static int __init u300_gpio_init(void) +{ + return platform_driver_probe(&gpio_driver, gpio_probe); +} + +static void __exit u300_gpio_exit(void) +{ + platform_driver_unregister(&gpio_driver); +} + +arch_initcall(u300_gpio_init); +module_exit(u300_gpio_exit); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); + +#ifdef U300_COH901571_3 +MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver"); +#endif + +#ifdef U300_COH901335 +MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver"); +#endif + +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h new file mode 100644 index 000000000000..92e3cc872c66 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +int __clk_get(struct clk *clk); +void __clk_put(struct clk *clk); + +#endif diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S new file mode 100644 index 000000000000..f3a1cbbeeab3 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -0,0 +1,22 @@ +/* + * + * arch-arm/mach-u300/include/mach/debug-macro.S + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Debugging macro include header. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <mach/hardware.h> + + .macro addruart,rx + /* If we move the adress using MMU, use this. */ + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address + ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address + orr \rx, \rx, #0x00003000 + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S new file mode 100644 index 000000000000..20731ae39d38 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/entry-macro.S @@ -0,0 +1,40 @@ +/* + * + * arch-arm/mach-u300/include/mach/entry-macro.S + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Low-level IRQ helper macros for ST-Ericsson U300 + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <mach/hardware.h> +#include <asm/hardware/vic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status + mov \irqnr, #0 + teq \irqstat, #0 + bne 1002f +1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status + mov \irqnr, #32 + teq \irqstat, #0 + beq 1003f +1002: tst \irqstat, #1 + bne 1003f + add \irqnr, \irqnr, #1 + movs \irqstat, \irqstat, lsr #1 + bne 1002b +1003: /* EQ will be set if no irqs pending */ + .endm diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h new file mode 100644 index 000000000000..c8174128d7eb --- /dev/null +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -0,0 +1,290 @@ +/* + * + * arch/arm/mach-u300/include/mach/gpio.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * GPIO block resgister definitions and inline macros for + * U300 GPIO COH 901 335 or COH 901 571/3 + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __MACH_U300_GPIO_H +#define __MACH_U300_GPIO_H + +#include <linux/kernel.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <asm/irq.h> + +/* Switch type depending on platform/chip variant */ +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) +#define U300_COH901335 +#endif +#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) +#define U300_COH901571_3 +#endif + +/* Get base address for regs here */ +#include "u300-regs.h" +/* IRQ numbers */ +#include "irqs.h" + +/* + * This is the GPIO block definitions. GPIO (General Purpose I/O) can be + * used for anything, and often is. The event/enable etc figures are for + * the lowermost pin (pin 0 on each port), shift this left to match your + * pin if you're gonna use these values. + */ +#ifdef U300_COH901335 +#define U300_GPIO_PORTX_SPACING (0x1C) +/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ +#define U300_GPIO_PXPDIR (0x00) +#define U300_GPIO_PXPDOR (0x00) +/* Port X Pin Config Register 32bit (R/W) */ +#define U300_GPIO_PXPCR (0x04) +#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) +#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) +#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) +/* Port X Interrupt Event Register 32bit (R/W) */ +#define U300_GPIO_PXIEV (0x08) +#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) +#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) +/* Port X Interrupt Enable Register 32bit (R/W) */ +#define U300_GPIO_PXIEN (0x0C) +#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) +/* Port X Interrupt Force Register 32bit (R/W) */ +#define U300_GPIO_PXIFR (0x10) +#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) +#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) +/* Port X Interrupt Config Register 32bit (R/W) */ +#define U300_GPIO_PXICR (0x14) +#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) +#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) +/* Port X Pull-up Enable Register 32bit (R/W) */ +#define U300_GPIO_PXPER (0x18) +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) +/* Control Register 32bit (R/W) */ +#define U300_GPIO_CR (0x54) +#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) +/* three ports of 8 bits each = GPIO pins 0..23 */ +#define U300_GPIO_NUM_PORTS 3 +#define U300_GPIO_PINS_PER_PORT 8 +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) +#endif + +#ifdef U300_COH901571_3 +/* + * Control Register 32bit (R/W) + * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores + * gives the number of GPIO pins. + * bit 8-2 (mask 0x000001FC) contains the core version ID. + */ +#define U300_GPIO_CR (0x00) +#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) +#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) +#define U300_GPIO_PORTX_SPACING (0x30) +/* Port X Pin Data INPUT Register 32bit (R/W) */ +#define U300_GPIO_PXPDIR (0x04) +/* Port X Pin Data OUTPUT Register 32bit (R/W) */ +#define U300_GPIO_PXPDOR (0x08) +/* Port X Pin Config Register 32bit (R/W) */ +#define U300_GPIO_PXPCR (0x0C) +#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) +#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) +#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) +/* Port X Pull-up Enable Register 32bit (R/W) */ +#define U300_GPIO_PXPER (0x10) +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) +/* Port X Interrupt Event Register 32bit (R/W) */ +#define U300_GPIO_PXIEV (0x14) +#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) +#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) +/* Port X Interrupt Enable Register 32bit (R/W) */ +#define U300_GPIO_PXIEN (0x18) +#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) +/* Port X Interrupt Force Register 32bit (R/W) */ +#define U300_GPIO_PXIFR (0x1C) +#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) +#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) +/* Port X Interrupt Config Register 32bit (R/W) */ +#define U300_GPIO_PXICR (0x20) +#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) +#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) +#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) +#ifdef CONFIG_MACH_U300_BS335 +/* seven ports of 8 bits each = GPIO pins 0..55 */ +#define U300_GPIO_NUM_PORTS 7 +#else +/* five ports of 8 bits each = GPIO pins 0..39 */ +#define U300_GPIO_NUM_PORTS 5 +#endif +#define U300_GPIO_PINS_PER_PORT 8 +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) +#endif + +/* + * Individual pin assignments for the B26/S26. Notice that the + * actual usage of these pins depends on the PAD MUX settings, that + * is why the same number can potentially appear several times. + * In the reference design each pin is only used for one purpose. + * These were determined by inspecting the B26/S26 schematic: + * 2/1911-ROA 128 1603 + */ +#ifdef CONFIG_MACH_U300_BS2X +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ +#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ +#define U300_GPIO_PIN_CAM_SLEEP 4 +#define U300_GPIO_PIN_CAM_REG_EN 5 +#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ +#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ +#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ +#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ +#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ +#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ +#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ +#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ +#endif + +/* + * Individual pin assignments for the B330/S330 and B365/S365. + * Notice that the actual usage of these pins depends on the + * PAD MUX settings, that is why the same number can potentially + * appear several times. In the reference design each pin is only + * used for one purpose. These were determined by inspecting the + * S365 schematic. + */ +#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ + defined(CONFIG_MACH_U300_BS335) +#define U300_GPIO_PIN_UART_RX 0 +#define U300_GPIO_PIN_UART_TX 1 +#define U300_GPIO_PIN_UART_CTS 2 +#define U300_GPIO_PIN_UART_RTS 3 +#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ +#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ +#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ +#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ + +#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ +#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ +#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ +#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ +#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ +#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ +#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ +#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ +#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ +#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ +#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ +#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ +#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ +#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ +#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ +#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ +#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ +#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ +#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ +#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ +#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ +#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ +#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ +#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ +#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ +#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ +#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ +#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ +#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ + +#ifdef CONFIG_MACH_U300_BS335 + +#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ +#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ +#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ +#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ +#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ +#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ +#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ +#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ + +#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ +#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ +#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ +#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ +#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ +#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ +#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ +#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ +#endif + +#endif + +/* translates a pin number to a port number */ +#define PIN_TO_PORT(val) (val >> 3) + +/* These can be found in arch/arm/mach-u300/gpio.c */ +extern int gpio_request(unsigned gpio, const char *label); +extern void gpio_free(unsigned gpio); +extern int gpio_direction_input(unsigned gpio); +extern int gpio_direction_output(unsigned gpio, int value); +extern int gpio_register_callback(unsigned gpio, + int (*func)(void *arg), + void *); +extern int gpio_unregister_callback(unsigned gpio); +extern void enable_irq_on_gpio_pin(unsigned gpio, int edge); +extern void disable_irq_on_gpio_pin(unsigned gpio); +extern void gpio_pullup(unsigned gpio, int value); +extern int gpio_get_value(unsigned gpio); +extern void gpio_set_value(unsigned gpio, int value); + +/* wrappers to sleep-enable the previous two functions */ +static inline unsigned gpio_to_irq(unsigned gpio) +{ + return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0; +} + +static inline unsigned irq_to_gpio(unsigned irq) +{ + /* + * FIXME: This is no 1-1 mapping at all, it points to the + * whole block of 8 pins. + */ + return (irq - IRQ_U300_GPIO_PORT0) << 3; +} + +#endif diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h new file mode 100644 index 000000000000..b99d4ce0ac2b --- /dev/null +++ b/arch/arm/mach-u300/include/mach/hardware.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-u300/include/mach/hardware.h + */ +#include <asm/sizes.h> +#include <mach/u300-regs.h> diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h new file mode 100644 index 000000000000..5d6b4c13b3a0 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/io.h @@ -0,0 +1,20 @@ +/* + * + * arch/arm/mach-u300/include/mach/io.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Dummy IO map for being able to use writew()/readw(), + * writel()/readw() and similar accessor functions. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h new file mode 100644 index 000000000000..a6867b12773e --- /dev/null +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -0,0 +1,114 @@ +/* + * + * arch/arm/mach-u300/include/mach/irqs.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * IRQ channel definitions for the U300 platforms. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +#define IRQ_U300_INTCON0_START 0 +#define IRQ_U300_INTCON1_START 32 +/* These are on INTCON0 - 30 lines */ +#define IRQ_U300_IRQ0_EXT 0 +#define IRQ_U300_IRQ1_EXT 1 +#define IRQ_U300_DMA 2 +#define IRQ_U300_VIDEO_ENC_0 3 +#define IRQ_U300_VIDEO_ENC_1 4 +#define IRQ_U300_AAIF_RX 5 +#define IRQ_U300_AAIF_TX 6 +#define IRQ_U300_AAIF_VGPIO 7 +#define IRQ_U300_AAIF_WAKEUP 8 +#define IRQ_U300_PCM_I2S0_FRAME 9 +#define IRQ_U300_PCM_I2S0_FIFO 10 +#define IRQ_U300_PCM_I2S1_FRAME 11 +#define IRQ_U300_PCM_I2S1_FIFO 12 +#define IRQ_U300_XGAM_GAMCON 13 +#define IRQ_U300_XGAM_CDI 14 +#define IRQ_U300_XGAM_CDICON 15 +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) +/* MMIACC not used on the DB3210 or DB3350 chips */ +#define IRQ_U300_XGAM_MMIACC 16 +#endif +#define IRQ_U300_XGAM_PDI 17 +#define IRQ_U300_XGAM_PDICON 18 +#define IRQ_U300_XGAM_GAMEACC 19 +#define IRQ_U300_XGAM_MCIDCT 20 +#define IRQ_U300_APEX 21 +#define IRQ_U300_UART0 22 +#define IRQ_U300_SPI 23 +#define IRQ_U300_TIMER_APP_OS 24 +#define IRQ_U300_TIMER_APP_DD 25 +#define IRQ_U300_TIMER_APP_GP1 26 +#define IRQ_U300_TIMER_APP_GP2 27 +#define IRQ_U300_TIMER_OS 28 +#define IRQ_U300_TIMER_MS 29 +#define IRQ_U300_KEYPAD_KEYBF 30 +#define IRQ_U300_KEYPAD_KEYBR 31 +/* These are on INTCON1 - 32 lines */ +#define IRQ_U300_GPIO_PORT0 32 +#define IRQ_U300_GPIO_PORT1 33 +#define IRQ_U300_GPIO_PORT2 34 + +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ + defined(CONFIG_MACH_U300_BS335) +/* These are for DB3150, DB3200 and DB3350 */ +#define IRQ_U300_WDOG 35 +#define IRQ_U300_EVHIST 36 +#define IRQ_U300_MSPRO 37 +#define IRQ_U300_MMCSD_MCIINTR0 38 +#define IRQ_U300_MMCSD_MCIINTR1 39 +#define IRQ_U300_I2C0 40 +#define IRQ_U300_I2C1 41 +#define IRQ_U300_RTC 42 +#define IRQ_U300_NFIF 43 +#define IRQ_U300_NFIF2 44 +#endif + +/* DB3150 and DB3200 have only 45 IRQs */ +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) +#define U300_NR_IRQS 45 +#endif + +/* The DB3350-specific interrupt lines */ +#ifdef CONFIG_MACH_U300_BS335 +#define IRQ_U300_ISP_F0 45 +#define IRQ_U300_ISP_F1 46 +#define IRQ_U300_ISP_F2 47 +#define IRQ_U300_ISP_F3 48 +#define IRQ_U300_ISP_F4 49 +#define IRQ_U300_GPIO_PORT3 50 +#define IRQ_U300_SYSCON_PLL_LOCK 51 +#define IRQ_U300_UART1 52 +#define IRQ_U300_GPIO_PORT4 53 +#define IRQ_U300_GPIO_PORT5 54 +#define IRQ_U300_GPIO_PORT6 55 +#define U300_NR_IRQS 56 +#endif + +/* The DB3210-specific interrupt lines */ +#ifdef CONFIG_MACH_U300_BS365 +#define IRQ_U300_GPIO_PORT3 35 +#define IRQ_U300_GPIO_PORT4 36 +#define IRQ_U300_WDOG 37 +#define IRQ_U300_EVHIST 38 +#define IRQ_U300_MSPRO 39 +#define IRQ_U300_MMCSD_MCIINTR0 40 +#define IRQ_U300_MMCSD_MCIINTR1 41 +#define IRQ_U300_I2C0 42 +#define IRQ_U300_I2C1 43 +#define IRQ_U300_RTC 44 +#define IRQ_U300_NFIF 45 +#define IRQ_U300_NFIF2 46 +#define IRQ_U300_SYSCON_PLL_LOCK 47 +#define U300_NR_IRQS 48 +#endif + +#define NR_IRQS U300_NR_IRQS + +#endif diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h new file mode 100644 index 000000000000..bf134bcc129d --- /dev/null +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -0,0 +1,42 @@ +/* + * + * arch/arm/mach-u300/include/mach/memory.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Memory virtual/physical mapping constants. + * Author: Linus Walleij <linus.walleij@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +#ifdef CONFIG_MACH_U300_DUAL_RAM + +#define PHYS_OFFSET UL(0x48000000) +#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100) + +#else + +#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX +#define PHYS_OFFSET (0x28000000 + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) +#else +#define PHYS_OFFSET (0x28000000 + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) +#endif +#define BOOT_PARAMS_OFFSET (0x28000000 + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ + (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100) +#endif + +/* + * We enable a real big DMA buffer if need be. + */ +#define CONSISTENT_DMA_SIZE SZ_4M + +#endif diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h new file mode 100644 index 000000000000..77d9210a82e2 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/platform.h @@ -0,0 +1,19 @@ +/* + * + * arch/arm/mach-u300/include/mach/platform.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Basic platform init and mapping functions. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __ASSEMBLY__ + +void u300_map_io(void); +void u300_init_irq(void); +void u300_init_devices(void); +extern struct sys_timer u300_timer; + +#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h new file mode 100644 index 000000000000..1c90d1b1ccb6 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -0,0 +1,644 @@ +/* + * + * arch/arm/mach-u300/include/mach/syscon.h + * + * + * Copyright (C) 2008 ST-Ericsson AB + * + * Author: Rickard Andersson <rickard.andersson@stericsson.com> + */ + +#ifndef __MACH_SYSCON_H +#define __MACH_SYSCON_H + +/* + * All register defines for SYSCON registers that concerns individual + * block clocks and reset lines are registered here. This is because + * we don't want any other file to try to fool around with this stuff. + */ + +/* APP side SYSCON registers */ +/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */ +/* CLK Control Register 16bit (R/W) */ +#define U300_SYSCON_CCR (0x0000) +#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) +#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) +#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) +/* CLK Status Register 16bit (R/W) */ +#define U300_SYSCON_CSR (0x0004) +#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) +#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) +/* Reset lines for SLOW devices 16bit (R/W) */ +#define U300_SYSCON_RSR (0x0014) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) +#endif +#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) +#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) +#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) +#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) +#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) +#define U300_SYSCON_RSR_EH_RESET_EN (0x0008) +#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) +#define U300_SYSCON_RSR_UART_RESET_EN (0x0002) +#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) +/* Reset lines for FAST devices 16bit (R/W) */ +#define U300_SYSCON_RFR (0x0018) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) +#endif +#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) +#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) +#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) +#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) +#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) +#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) +#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) +/* Reset lines for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_RRR (0x001c) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) +#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) +#endif +#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) +#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) +#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) +#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) +#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) +#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) +#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) +#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) +#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) +#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) +#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) +/* Clock enable for SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CESR (0x0020) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) +#endif +#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) +#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) +#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) +#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) +#define U300_SYSCON_CESR_EH_CLK_EN (0x0008) +#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) +#define U300_SYSCON_CESR_UART_CLK_EN (0x0002) +#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) +/* Clock enable for FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CEFR (0x0024) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) +#endif +#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) +#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) +#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) +#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) +/* Clock enable for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CERR (0x0028) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) +#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) +#endif +#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) +#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) +#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) +#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) +#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) +#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) +#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) +#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) +#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) +#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) +#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) +#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) +/* Single block clock enable 16bit (-/W) */ +#define U300_SYSCON_SBCER (0x002c) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) +#endif +#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) +#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) +#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) +#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) +#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) +#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) +#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) +#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) +#endif +#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) +#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) +#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) +#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) +#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) +#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) +#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) +#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) +#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) +#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) +#endif +#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) +#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) +#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) +#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) +#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) +#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) +#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) +#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) +#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) +#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) +#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) +#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) +/* Single block clock disable 16bit (-/W) */ +#define U300_SYSCON_SBCDR (0x0030) +/* Same values as above for SBCER */ +/* Clock force SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CFSR (0x003c) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) +#endif +#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) +/* Clock force FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CFFR (0x40) +/* Values not defined. Define if you want to use them. */ +/* Clock force the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CFRR (0x44) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) +#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) +#endif +#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) +#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) +#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) +#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) +#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) +/* PLL208 Frequency Control 16bit (R/W) */ +#define U300_SYSCON_PFCR (0x48) +#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) +/* Power Management Control 16bit (R/W) */ +#define U300_SYSCON_PMCR (0x50) +#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) +#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) +/* + * All other clocking registers moved to clock.c! + */ +/* Reset Out 16bit (R/W) */ +#define U300_SYSCON_RCR (0x6c) +#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) +/* EMIF Slew Rate Control 16bit (R/W) */ +#define U300_SYSCON_SRCLR (0x70) +#define U300_SYSCON_SRCLR_MASK (0x03FF) +#define U300_SYSCON_SRCLR_VALUE (0x03FF) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) +/* EMIF Clock Control Register 16bit (R/W) */ +#define U300_SYSCON_ECCR (0x0078) +#define U300_SYSCON_ECCR_MASK (0x000F) +#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) +#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) +#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) +#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) +/* PAD MUX Control register 1 (LOW) 16bit (R/W) */ +#define U300_SYSCON_PMC1LR (0x007C) +#define U300_SYSCON_PMC1LR_MASK (0xFFFF) +#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000) +#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000) +#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000) +#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000) +#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000) +#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000) +#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000) +#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000) +#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000) +#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00) +#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000) +#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400) +#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800) +#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00) +#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300) +#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000) +#define U300_SYSCON_PMC1LR_ETM_APP (0x0100) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080) +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020) +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008) +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C) +#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003) +#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000) +#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001) +#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002) +#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003) +/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */ +#define U300_SYSCON_PMC1HR (0x007E) +#define U300_SYSCON_PMC1HR_MASK (0xFFFF) +#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000) +#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000) +#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000) +#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000) +#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800) +#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040) +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0) +#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030) +#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010) +#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020) +#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030) +#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C) +#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004) +#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008) +#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C) +#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003) +#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000) +#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001) +#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003) +/* Step one for killing the applications system 16bit (-/W) */ +#define U300_SYSCON_KA1R (0x0080) +#define U300_SYSCON_KA1R_MASK (0xFFFF) +#define U300_SYSCON_KA1R_VALUE (0xFFFF) +/* Step two for killing the application system 16bit (-/W) */ +#define U300_SYSCON_KA2R (0x0084) +#define U300_SYSCON_KA2R_MASK (0xFFFF) +#define U300_SYSCON_KA2R_VALUE (0xFFFF) +/* MMC/MSPRO frequency divider register 0 16bit (R/W) */ +#define U300_SYSCON_MMF0R (0x90) +#define U300_SYSCON_MMF0R_MASK (0x00FF) +#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) +/* MMC/MSPRO frequency divider register 1 16bit (R/W) */ +#define U300_SYSCON_MMF1R (0x94) +#define U300_SYSCON_MMF1R_MASK (0x00FF) +#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) +/* AAIF control register 16 bit (R/W) */ +#define U300_SYSCON_AAIFCR (0x98) +#define U300_SYSCON_AAIFCR_MASK (0x0003) +#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003) +#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000) +#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001) +#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002) +#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003) +/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ +#define U300_SYSCON_MMCR (0x9C) +#define U300_SYSCON_MMCR_MASK (0x0003) +#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) +#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) + +/* TODO: More SYSCON registers missing */ +#define U300_SYSCON_PMC3R (0x10c) +#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000) +#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000) +#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000) +#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000) +/* TODO: Missing other configs, I just added the SPI stuff */ + +/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ +#define U300_SYSCON_S0CCR (0x120) +#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ +#define U300_SYSCON_S1CCR (0x124) +#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ +#define U300_SYSCON_S2CCR (0x128) +#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) +#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) +#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */ +#define U300_SYSCON_MCR (0x12c) +#define U300_SYSCON_MCR_FIELD_MASK (0x00FF) +#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0) +#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000) +#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040) +#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0) +#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030) +#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000) +#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010) +#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020) +#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030) +#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C) +#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000) +#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004) +#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008) +#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C) +#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002) +#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001) +/* Clock activity observability register 0 */ +#define U300_SYSCON_C0OAR (0x140) +#define U300_SYSCON_C0OAR_MASK (0xFFFF) +#define U300_SYSCON_C0OAR_VALUE (0xFFFF) +#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) +#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) +#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) +#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) +#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) +#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) +#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) +#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) +#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) +#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) +#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) +#define U300_SYSCON_C0OAR_APEX_CLK (0x0010) +#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) +#define U300_SYSCON_C0OAR_AHB_CLK (0x0004) +#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) +#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) +/* Clock activity observability register 1 */ +#define U300_SYSCON_C1OAR (0x144) +#define U300_SYSCON_C1OAR_MASK (0x3FFE) +#define U300_SYSCON_C1OAR_VALUE (0x3FFE) +#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) +#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) +#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) +#define U300_SYSCON_C1OAR_MMC_CLK (0x0400) +#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) +#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) +#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) +#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) +#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) +#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) +#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) +#define U300_SYSCON_C1OAR_PPM_CLK (0x0004) +#define U300_SYSCON_C1OAR_DMA_CLK (0x0002) +/* Clock activity observability register 2 */ +#define U300_SYSCON_C2OAR (0x148) +#define U300_SYSCON_C2OAR_MASK (0x0FFF) +#define U300_SYSCON_C2OAR_VALUE (0x0FFF) +#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) +#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) +#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) +#define U300_SYSCON_C2OAR_VC_CLK (0x0100) +#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) +#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) +#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) +#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) +#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) +#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) +#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) +#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) + +/* Chip ID register 16bit (R/-) */ +#define U300_SYSCON_CIDR (0x400) +/* Video IRQ clear 16bit (R/W) */ +#define U300_SYSCON_VICR (0x404) +#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002) +#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001) +/* SMCR */ +#define U300_SYSCON_SMCR (0x4d0) +#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) +#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) +#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) +#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) +/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ +#define U300_SYSCON_CSDR (0x4f0) +#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) +/* PRINT_CONTROL Print Control 16bit (R/-) */ +#define U300_SYSCON_PCR (0x4f8) +#define U300_SYSCON_PCR_SERV_IND (0x0001) +/* BOOT_CONTROL 16bit (R/-) */ +#define U300_SYSCON_BCR (0x4fc) +#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) +#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) +#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) +#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) + + +/* CPU clock defines */ +/** + * CPU high frequency in MHz + */ +#define SYSCON_CPU_CLOCK_HIGH 208 +/** + * CPU medium frequency in MHz + */ +#define SYSCON_CPU_CLOCK_MEDIUM 104 +/** + * CPU low frequency in MHz + */ +#define SYSCON_CPU_CLOCK_LOW 13 + +/* EMIF clock defines */ +/** + * EMIF high frequency in MHz + */ +#define SYSCON_EMIF_CLOCK_HIGH 104 +/** + * EMIF medium frequency in MHz + */ +#define SYSCON_EMIF_CLOCK_MEDIUM 104 +/** + * EMIF low frequency in MHz + */ +#define SYSCON_EMIF_CLOCK_LOW 13 + +/* AHB clock defines */ +/** + * AHB high frequency in MHz + */ +#define SYSCON_AHB_CLOCK_HIGH 52 +/** + * AHB medium frequency in MHz + */ +#define SYSCON_AHB_CLOCK_MEDIUM 52 +/** + * AHB low frequency in MHz + */ +#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */ + +enum syscon_busmaster { + SYSCON_BM_DMAC, + SYSCON_BM_XGAM, + SYSCON_BM_VIDEO_ENC +}; + +/* + * Note that this array must match the order of the array "clk_reg" + * in syscon.c + */ +enum syscon_clk { + SYSCON_CLKCONTROL_SLOW_BRIDGE, + SYSCON_CLKCONTROL_UART, + SYSCON_CLKCONTROL_BTR, + SYSCON_CLKCONTROL_EH, + SYSCON_CLKCONTROL_GPIO, + SYSCON_CLKCONTROL_KEYPAD, + SYSCON_CLKCONTROL_APP_TIMER, + SYSCON_CLKCONTROL_ACC_TIMER, + SYSCON_CLKCONTROL_FAST_BRIDGE, + SYSCON_CLKCONTROL_I2C0, + SYSCON_CLKCONTROL_I2C1, + SYSCON_CLKCONTROL_I2S0, + SYSCON_CLKCONTROL_I2S1, + SYSCON_CLKCONTROL_MMC, + SYSCON_CLKCONTROL_SPI, + SYSCON_CLKCONTROL_I2S0_CORE, + SYSCON_CLKCONTROL_I2S1_CORE, + SYSCON_CLKCONTROL_AAIF, + SYSCON_CLKCONTROL_AHB, + SYSCON_CLKCONTROL_APEX, + SYSCON_CLKCONTROL_CPU, + SYSCON_CLKCONTROL_DMA, + SYSCON_CLKCONTROL_EMIF, + SYSCON_CLKCONTROL_NAND_IF, + SYSCON_CLKCONTROL_VIDEO_ENC, + SYSCON_CLKCONTROL_XGAM, + SYSCON_CLKCONTROL_SEMI, + SYSCON_CLKCONTROL_AHB_SUBSYS, + SYSCON_CLKCONTROL_MSPRO +}; + +enum syscon_sysclk_mode { + SYSCON_SYSCLK_DISABLED, + SYSCON_SYSCLK_M_CLK, + SYSCON_SYSCLK_ACC_FSM, + SYSCON_SYSCLK_PLL60_48, + SYSCON_SYSCLK_PLL60_60, + SYSCON_SYSCLK_ACC_PLL208, + SYSCON_SYSCLK_APP_PLL13, + SYSCON_SYSCLK_APP_FSM, + SYSCON_SYSCLK_RTC, + SYSCON_SYSCLK_APP_PLL208 +}; + +enum syscon_sysclk_req { + SYSCON_SYSCLKREQ_DISABLED, + SYSCON_SYSCLKREQ_ACTIVE_LOW +}; + +enum syscon_clk_mode { + SYSCON_CLKMODE_OFF, + SYSCON_CLKMODE_DEFAULT, + SYSCON_CLKMODE_LOW, + SYSCON_CLKMODE_MEDIUM, + SYSCON_CLKMODE_HIGH, + SYSCON_CLKMODE_PERMANENT, + SYSCON_CLKMODE_ON, +}; + +enum syscon_call_mode { + SYSCON_CLKCALL_NOWAIT, + SYSCON_CLKCALL_WAIT, +}; + +int syscon_dc_on(bool keep_power_on); +int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster, + bool active); +bool syscon_get_busmaster_active_state(void); +int syscon_set_sleep_mask(enum syscon_clk, + bool sleep_ctrl); +int syscon_config_sysclk(u32 sysclk, + enum syscon_sysclk_mode sysclkmode, + bool inverse, + u32 divisor, + enum syscon_sysclk_req sysclkreq); +bool syscon_can_turn_off_semi_clock(void); + +/* This function is restricted to core.c */ +int syscon_request_normal_power(bool req); + +/* This function is restricted to be used by platform_speed.c */ +int syscon_speed_request(enum syscon_call_mode wait_mode, + enum syscon_clk_mode req_clk_mode); +#endif /* __MACH_SYSCON_H */ diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h new file mode 100644 index 000000000000..8daf13634ce0 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/system.h @@ -0,0 +1,42 @@ +/* + * + * arch/arm/mach-u300/include/mach/system.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * System shutdown and reset functions. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <mach/hardware.h> +#include <asm/io.h> +#include <asm/hardware/vic.h> +#include <asm/irq.h> + +/* Forward declare this function from the watchdog */ +void coh901327_watchdog_reset(void); + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static void arch_reset(char mode, const char *cmd) +{ + switch (mode) { + case 's': + case 'h': + printk(KERN_CRIT "RESET: shutting down/rebooting system\n"); + /* Disable interrupts */ + local_irq_disable(); +#ifdef CONFIG_COH901327_WATCHDOG + coh901327_watchdog_reset(); +#endif + break; + default: + /* Do nothing */ + break; + } + /* Wait for system do die/reset. */ + while (1); +} diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h new file mode 100644 index 000000000000..f233b72633f6 --- /dev/null +++ b/arch/arm/mach-u300/include/mach/timex.h @@ -0,0 +1,17 @@ +/* + * + * arch/arm/mach-u300/include/mach/timex.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Platform tick rate definition. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#ifndef __MACH_TIMEX_H +#define __MACH_TIMEX_H + +/* This is for the APP OS GP1 (General Purpose 1) timer */ +#define CLOCK_TICK_RATE 1000000 + +#endif diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h new file mode 100644 index 000000000000..88333dfb19fc --- /dev/null +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -0,0 +1,187 @@ +/* + * + * arch/arm/mach-u300/include/mach/u300-regs.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Basic register address definitions in physical memory and + * some block defintions for core devices like the timer. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __MACH_U300_REGS_H +#define __MACH_U300_REGS_H + +/* + * These are the large blocks of memory allocated for I/O. + * the defines are used for setting up the I/O memory mapping. + */ + +/* NAND Flash CS0 */ +#define U300_NAND_CS0_PHYS_BASE 0x80000000 +#define U300_NAND_CS0_VIRT_BASE 0xff040000 + +/* NFIF */ +#define U300_NAND_IF_PHYS_BASE 0x9f800000 +#define U300_NAND_IF_VIRT_BASE 0xff030000 + +/* AHB Peripherals */ +#define U300_AHB_PER_PHYS_BASE 0xa0000000 +#define U300_AHB_PER_VIRT_BASE 0xff010000 + +/* FAST Peripherals */ +#define U300_FAST_PER_PHYS_BASE 0xc0000000 +#define U300_FAST_PER_VIRT_BASE 0xff020000 + +/* SLOW Peripherals */ +#define U300_SLOW_PER_PHYS_BASE 0xc0010000 +#define U300_SLOW_PER_VIRT_BASE 0xff000000 + +/* Boot ROM */ +#define U300_BOOTROM_PHYS_BASE 0xffff0000 +#define U300_BOOTROM_VIRT_BASE 0xffff0000 + +/* SEMI config base */ +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SEMI_CONFIG_BASE 0x2FFE0000 +#else +#define U300_SEMI_CONFIG_BASE 0x30000000 +#endif + +/* + * All the following peripherals are specified at their PHYSICAL address, + * so if you need to access them (in the kernel), you MUST use the macros + * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST() + * etc. + */ + +/* + * AHB peripherals + */ + +/* AHB Peripherals Bridge Controller */ +#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) + +/* Vectored Interrupt Controller 0, servicing 32 interrupts */ +#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) +#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000) + +/* Vectored Interrupt Controller 1, servicing 32 interrupts */ +#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) +#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000) + +/* Memory Stick Pro (MSPRO) controller */ +#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) + +/* EMIF Configuration Area */ +#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) + + +/* + * FAST peripherals + */ + +/* FAST bridge control */ +#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) + +/* MMC/SD controller */ +#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) + +/* PCM I2S0 controller */ +#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) + +/* PCM I2S1 controller */ +#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) + +/* I2C0 controller */ +#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) + +/* I2C1 controller */ +#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) + +/* SPI controller */ +#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) + +#ifdef CONFIG_MACH_U300_BS335 +/* Fast UART1 on U335 only */ +#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) +#endif + +/* + * SLOW peripherals + */ + +/* SLOW bridge control */ +#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) + +/* SYSCON */ +#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) +#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000) + +/* Watchdog */ +#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) + +/* UART0 */ +#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) + +/* APP side special timer */ +#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) +#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000) + +/* Keypad */ +#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) + +/* GPIO */ +#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) + +/* RTC */ +#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) + +/* Bus tracer */ +#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) + +/* Event handler (hardware queue) */ +#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) + +/* Genric Timer */ +#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) + +/* PPM */ +#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) + + +/* + * REST peripherals + */ + +/* ISP (image signal processor) is only available in U335 */ +#ifdef CONFIG_MACH_U300_BS335 +#define U300_ISP_BASE (0xA0008000) +#endif + +/* DMA Controller base */ +#define U300_DMAC_BASE (0xC0020000) + +/* MSL Base */ +#define U300_MSL_BASE (0xc0022000) + +/* APEX Base */ +#define U300_APEX_BASE (0xc0030000) + +/* Video Encoder Base */ +#ifdef CONFIG_MACH_U300_BS335 +#define U300_VIDEOENC_BASE (0xc0080000) +#else +#define U300_VIDEOENC_BASE (0xc0040000) +#endif + +/* XGAM Base */ +#define U300_XGAM_BASE (0xd0000000) + +/* + * Virtual accessor macros for static devices + */ + + +#endif diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-u300/include/mach/uncompress.h index 46d4ca91af79..29acb718acf7 100644 --- a/arch/arm/mach-imx/include/mach/system.h +++ b/arch/arm/mach-u300/include/mach/uncompress.h @@ -1,8 +1,7 @@ /* - * arch/arm/mach-imxads/include/mach/system.h + * arch/arm/mach-u300/include/mach/uncompress.h * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2003 ARM Limited * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,23 +17,30 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H +#define AMBA_UART_DR (*(volatile unsigned char *)0xc0013000) +#define AMBA_UART_LCRH (*(volatile unsigned char *)0xc001302C) +#define AMBA_UART_CR (*(volatile unsigned char *)0xc0013030) +#define AMBA_UART_FR (*(volatile unsigned char *)0xc0013018) -static void -arch_idle(void) +/* + * This does not append a newline + */ +static inline void putc(int c) { - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); + while (AMBA_UART_FR & (1 << 5)) + barrier(); + + AMBA_UART_DR = c; } -static inline void -arch_reset(char mode, const char *cmd) +static inline void flush(void) { - cpu_reset(0); + while (AMBA_UART_FR & (1 << 3)) + barrier(); } -#endif +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h new file mode 100644 index 000000000000..b00c51a66fbe --- /dev/null +++ b/arch/arm/mach-u300/include/mach/vmalloc.h @@ -0,0 +1,12 @@ +/* + * + * arch/arm/mach-u300/include/mach/vmalloc.h + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Virtual memory allocations + * End must be above the I/O registers and on an even 2MiB boundary. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#define VMALLOC_END 0xfe800000 diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c new file mode 100644 index 000000000000..3138d3955c9e --- /dev/null +++ b/arch/arm/mach-u300/mmc.c @@ -0,0 +1,216 @@ +/* + * + * arch/arm/mach-u300/mmc.c + * + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * + * Author: Linus Walleij <linus.walleij@stericsson.com> + * Author: Johan Lundin <johan.lundin@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/mmc/host.h> +#include <linux/input.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/machine.h> +#include <linux/gpio.h> + +#include <asm/mach/mmc.h> +#include "mmc.h" + +struct mmci_card_event { + struct input_dev *mmc_input; + int mmc_inserted; + struct work_struct workq; + struct mmc_platform_data mmc0_plat_data; +}; + +static unsigned int mmc_status(struct device *dev) +{ + struct mmci_card_event *mmci_card = container_of( + dev->platform_data, + struct mmci_card_event, mmc0_plat_data); + + return mmci_card->mmc_inserted; +} + +/* + * Here follows a large chunk of code which will only be enabled if you + * have both the AB3100 chip mounted and the MMC subsystem activated. + */ + +static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage) +{ + int v; + + /* + * MMC Spec: + * bit 7: 1.70 - 1.95V + * bit 8 - 14: 2.0 - 2.6V + * bit 15 - 23: 2.7 - 3.6V + * + * ab3100 voltages: + * 000 - 2.85V + * 001 - 2.75V + * 010 - 1.8V + * 011 - 1.5V + */ + switch (voltage) { + case 8: + v = 3; + break; + case 9: + case 10: + case 11: + case 12: + case 13: + case 14: + case 15: + v = 1; + break; + case 16: + v = 1; + break; + case 17: + case 18: + case 19: + case 20: + case 21: + case 22: + case 23: + case 24: + v = 0; + break; + default: + v = 0; + break; + } + + /* PL180 voltage register bits */ + return v << 2; +} + + + +static int mmci_callback(void *data) +{ + struct mmci_card_event *mmci_card = data; + + disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD); + schedule_work(&mmci_card->workq); + + return 0; +} + + +static ssize_t gpio_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmci_card_event *mmci_card = container_of( + dev->platform_data, + struct mmci_card_event, mmc0_plat_data); + + + return sprintf(buf, "%d\n", !mmci_card->mmc_inserted); +} + +static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL); + +static void _mmci_callback(struct work_struct *ws) +{ + + struct mmci_card_event *mmci_card = container_of( + ws, + struct mmci_card_event, workq); + + mdelay(20); + + mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD); + + input_report_switch(mmci_card->mmc_input, KEY_INSERT, + !mmci_card->mmc_inserted); + input_sync(mmci_card->mmc_input); + + pr_debug("MMC/SD card was %s\n", + mmci_card->mmc_inserted ? "removed" : "inserted"); + + enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted); +} + +int __devinit mmc_init(struct amba_device *adev) +{ + struct mmci_card_event *mmci_card; + struct device *mmcsd_device = &adev->dev; + int ret = 0; + + mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL); + if (!mmci_card) + return -ENOMEM; + + /* Nominally 2.85V on our platform */ + mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29; + mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd; + mmci_card->mmc0_plat_data.status = mmc_status; + + mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; + + INIT_WORK(&mmci_card->workq, _mmci_callback); + + ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection"); + if (ret) { + printk(KERN_CRIT "Could not allocate MMC card detection " \ + "GPIO pin\n"); + goto out; + } + + ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD); + if (ret) { + printk(KERN_CRIT "Invalid GPIO pin requested\n"); + goto out; + } + + ret = sysfs_create_file(&mmcsd_device->kobj, + &dev_attr_mmc_inserted.attr); + if (ret) + goto out; + + mmci_card->mmc_input = input_allocate_device(); + if (!mmci_card->mmc_input) { + printk(KERN_CRIT "Could not allocate MMC input device\n"); + return -ENOMEM; + } + + mmci_card->mmc_input->name = "MMC insert notification"; + mmci_card->mmc_input->id.bustype = BUS_HOST; + mmci_card->mmc_input->id.vendor = 0; + mmci_card->mmc_input->id.product = 0; + mmci_card->mmc_input->id.version = 0x0100; + mmci_card->mmc_input->dev.parent = mmcsd_device; + input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT); + + /* + * Since this must always be compiled into the kernel, this input + * is never unregistered or free:ed. + */ + ret = input_register_device(mmci_card->mmc_input); + if (ret) { + input_free_device(mmci_card->mmc_input); + goto out; + } + + input_set_drvdata(mmci_card->mmc_input, mmci_card); + + ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback, + mmci_card); + + schedule_work(&mmci_card->workq); + + printk(KERN_INFO "Registered MMC insert/remove notification\n"); +out: + return ret; +} diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h new file mode 100644 index 000000000000..92b85125abb3 --- /dev/null +++ b/arch/arm/mach-u300/mmc.h @@ -0,0 +1,18 @@ +/* + * + * arch/arm/mach-u300/mmc.h + * + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ +#ifndef MMC_H +#define MMC_H + +#include <linux/amba/bus.h> + +int __devinit mmc_init(struct amba_device *adev); + +#endif diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c new file mode 100644 index 000000000000..f3664564f086 --- /dev/null +++ b/arch/arm/mach-u300/padmux.c @@ -0,0 +1,58 @@ +/* + * + * arch/arm/mach-u300/padmux.c + * + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * U300 PADMUX functions + * Author: Linus Walleij <linus.walleij@stericsson.com> + * + */ +#include <linux/io.h> +#include <linux/err.h> +#include <mach/u300-regs.h> +#include <mach/syscon.h> + +#include "padmux.h" + +/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */ +void pmx_set_mission_mode_mmc(void) +{ + u16 val; + + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR); + val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); + val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK; + val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); +} + +void pmx_set_mission_mode_spi(void) +{ + u16 val; + + /* Set up padmuxing so the SPI port and its chipselects are active */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); + /* + * Activate the SPI port (disable the use of these pins for generic + * GPIO, DSP, AAIF + */ + val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK; + val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI; + /* + * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other + * things also) + */ + val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK; + val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI; + /* + * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other + * things also) + */ + val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK; + val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR); +} diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h new file mode 100644 index 000000000000..8c2099ac5046 --- /dev/null +++ b/arch/arm/mach-u300/padmux.h @@ -0,0 +1,19 @@ +/* + * + * arch/arm/mach-u300/padmux.h + * + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * U300 PADMUX API + * Author: Linus Walleij <linus.walleij@stericsson.com> + * + */ + +#ifndef __MACH_U300_PADMUX_H +#define __MACH_U300_PADMUX_H + +void pmx_set_mission_mode_mmc(void); +void pmx_set_mission_mode_spi(void); + +#endif diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c new file mode 100644 index 000000000000..cce53204880e --- /dev/null +++ b/arch/arm/mach-u300/timer.c @@ -0,0 +1,422 @@ +/* + * + * arch/arm/mach-u300/timer.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Timer COH 901 328, runs the OS timer interrupt. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/types.h> +#include <linux/io.h> + +#include <mach/hardware.h> + +/* Generic stuff */ +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach/irq.h> + +#include "clock.h" + +/* + * APP side special timer registers + * This timer contains four timers which can fire an interrupt each. + * OS (operating system) timer @ 32768 Hz + * DD (device driver) timer @ 1 kHz + * GP1 (general purpose 1) timer @ 1MHz + * GP2 (general purpose 2) timer @ 1MHz + */ + +/* Reset OS Timer 32bit (-/W) */ +#define U300_TIMER_APP_ROST (0x0000) +#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000) +/* Enable OS Timer 32bit (-/W) */ +#define U300_TIMER_APP_EOST (0x0004) +#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000) +/* Disable OS Timer 32bit (-/W) */ +#define U300_TIMER_APP_DOST (0x0008) +#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000) +/* OS Timer Mode Register 32bit (-/W) */ +#define U300_TIMER_APP_SOSTM (0x000c) +#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001) +/* OS Timer Status Register 32bit (R/-) */ +#define U300_TIMER_APP_OSTS (0x0010) +#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F) +#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001) +#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002) +#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010) +#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020) +#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020) +#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040) +#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080) +/* OS Timer Current Count Register 32bit (R/-) */ +#define U300_TIMER_APP_OSTCC (0x0014) +/* OS Timer Terminal Count Register 32bit (R/W) */ +#define U300_TIMER_APP_OSTTC (0x0018) +/* OS Timer Interrupt Enable Register 32bit (-/W) */ +#define U300_TIMER_APP_OSTIE (0x001c) +#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000) +#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001) +/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */ +#define U300_TIMER_APP_OSTIA (0x0020) +#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080) + +/* Reset DD Timer 32bit (-/W) */ +#define U300_TIMER_APP_RDDT (0x0040) +#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000) +/* Enable DD Timer 32bit (-/W) */ +#define U300_TIMER_APP_EDDT (0x0044) +#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000) +/* Disable DD Timer 32bit (-/W) */ +#define U300_TIMER_APP_DDDT (0x0048) +#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000) +/* DD Timer Mode Register 32bit (-/W) */ +#define U300_TIMER_APP_SDDTM (0x004c) +#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001) +/* DD Timer Status Register 32bit (R/-) */ +#define U300_TIMER_APP_DDTS (0x0050) +#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F) +#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001) +#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002) +#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010) +#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020) +#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020) +#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040) +#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080) +/* DD Timer Current Count Register 32bit (R/-) */ +#define U300_TIMER_APP_DDTCC (0x0054) +/* DD Timer Terminal Count Register 32bit (R/W) */ +#define U300_TIMER_APP_DDTTC (0x0058) +/* DD Timer Interrupt Enable Register 32bit (-/W) */ +#define U300_TIMER_APP_DDTIE (0x005c) +#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000) +#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001) +/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */ +#define U300_TIMER_APP_DDTIA (0x0060) +#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080) + +/* Reset GP1 Timer 32bit (-/W) */ +#define U300_TIMER_APP_RGPT1 (0x0080) +#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000) +/* Enable GP1 Timer 32bit (-/W) */ +#define U300_TIMER_APP_EGPT1 (0x0084) +#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000) +/* Disable GP1 Timer 32bit (-/W) */ +#define U300_TIMER_APP_DGPT1 (0x0088) +#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000) +/* GP1 Timer Mode Register 32bit (-/W) */ +#define U300_TIMER_APP_SGPT1M (0x008c) +#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001) +/* GP1 Timer Status Register 32bit (R/-) */ +#define U300_TIMER_APP_GPT1S (0x0090) +#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F) +#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001) +#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002) +#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010) +#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020) +#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020) +#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040) +#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080) +/* GP1 Timer Current Count Register 32bit (R/-) */ +#define U300_TIMER_APP_GPT1CC (0x0094) +/* GP1 Timer Terminal Count Register 32bit (R/W) */ +#define U300_TIMER_APP_GPT1TC (0x0098) +/* GP1 Timer Interrupt Enable Register 32bit (-/W) */ +#define U300_TIMER_APP_GPT1IE (0x009c) +#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000) +#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001) +/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */ +#define U300_TIMER_APP_GPT1IA (0x00a0) +#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080) + +/* Reset GP2 Timer 32bit (-/W) */ +#define U300_TIMER_APP_RGPT2 (0x00c0) +#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000) +/* Enable GP2 Timer 32bit (-/W) */ +#define U300_TIMER_APP_EGPT2 (0x00c4) +#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000) +/* Disable GP2 Timer 32bit (-/W) */ +#define U300_TIMER_APP_DGPT2 (0x00c8) +#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000) +/* GP2 Timer Mode Register 32bit (-/W) */ +#define U300_TIMER_APP_SGPT2M (0x00cc) +#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001) +/* GP2 Timer Status Register 32bit (R/-) */ +#define U300_TIMER_APP_GPT2S (0x00d0) +#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F) +#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001) +#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002) +#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010) +#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020) +#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000) +#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020) +#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040) +#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080) +/* GP2 Timer Current Count Register 32bit (R/-) */ +#define U300_TIMER_APP_GPT2CC (0x00d4) +/* GP2 Timer Terminal Count Register 32bit (R/W) */ +#define U300_TIMER_APP_GPT2TC (0x00d8) +/* GP2 Timer Interrupt Enable Register 32bit (-/W) */ +#define U300_TIMER_APP_GPT2IE (0x00dc) +#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000) +#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001) +/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */ +#define U300_TIMER_APP_GPT2IA (0x00e0) +#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080) + +/* Clock request control register - all four timers */ +#define U300_TIMER_APP_CRC (0x100) +#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001) + +#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) +#define US_PER_TICK ((1000000 + (HZ/2)) / HZ) + +/* + * The u300_set_mode() function is always called first, if we + * have oneshot timer active, the oneshot scheduling function + * u300_set_next_event() is called immediately after. + */ +static void u300_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* Disable interrupts on GPT1 */ + writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Disable GP1 while we're reprogramming it. */ + writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + /* + * Set the periodic mode to a certain number of ticks per + * jiffy. + */ + writel(TICKS_PER_JIFFY, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + /* + * Set continuous mode, so the timer keeps triggering + * interrupts. + */ + writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS, + U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + /* Enable timer interrupts */ + writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Then enable the OS timer again */ + writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* Just break; here? */ + /* + * The actual event will be programmed by the next event hook, + * so we just set a dummy value somewhere at the end of the + * universe here. + */ + /* Disable interrupts on GPT1 */ + writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Disable GP1 while we're reprogramming it. */ + writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + /* + * Expire far in the future, u300_set_next_event() will be + * called soon... + */ + writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + /* We run one shot per tick here! */ + writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, + U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + /* Enable interrupts for this timer */ + writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Enable timer */ + writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + /* Disable interrupts on GP1 */ + writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Disable GP1 */ + writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + break; + case CLOCK_EVT_MODE_RESUME: + /* Ignore this call */ + break; + } +} + +/* + * The app timer in one shot mode obviously has to be reprogrammed + * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace + * the interrupt disable + timer disable commands with a reset command, + * it will fail miserably. Apparently (and I found this the hard way) + * the timer is very sensitive to the instruction order, though you don't + * get that impression from the data sheet. + */ +static int u300_set_next_event(unsigned long cycles, + struct clock_event_device *evt) + +{ + /* Disable interrupts on GPT1 */ + writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Disable GP1 while we're reprogramming it. */ + writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); + /* Reset the General Purpose timer 1. */ + writel(U300_TIMER_APP_RGPT1_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); + /* IRQ in n * cycles */ + writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); + /* + * We run one shot per tick here! (This is necessary to reconfigure, + * the timer will tilt if you don't!) + */ + writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, + U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); + /* Enable timer interrupts */ + writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); + /* Then enable the OS timer again */ + writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); + return 0; +} + + +/* Use general purpose timer 1 as clock event */ +static struct clock_event_device clockevent_u300_1mhz = { + .name = "GPT1", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + /* 22 calculated using the algorithm in arch/mips/kernel/time.c */ + .shift = 22, + .set_next_event = u300_set_next_event, + .set_mode = u300_set_mode, +}; + +/* Clock event timer interrupt handler */ +static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_u300_1mhz; + /* ACK/Clear timer IRQ for the APP GPT1 Timer */ + writel(U300_TIMER_APP_GPT1IA_IRQ_ACK, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA); + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction u300_timer_irq = { + .name = "U300 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = u300_timer_interrupt, +}; + +/* Use general purpose timer 2 as clock source */ +static cycle_t u300_get_cycles(struct clocksource *cs) +{ + return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); +} + +static struct clocksource clocksource_u300_1mhz = { + .name = "GPT2", + .rating = 300, /* Reasonably fast and accurate clock source */ + .read = u300_get_cycles, + .mask = CLOCKSOURCE_MASK(32), /* 32 bits */ + /* 22 calculated using the algorithm in arch/mips/kernel/time.c */ + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + +/* + * This sets up the system timers, clock source and clock event. + */ +static void __init u300_timer_init(void) +{ + u300_enable_timer_clock(); + /* + * Disable the "OS" and "DD" timers - these are designed for Symbian! + * Example usage in cnh1601578 cpu subsystem pd_timer_app.c + */ + writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC); + writel(U300_TIMER_APP_ROST_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST); + writel(U300_TIMER_APP_DOST_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST); + writel(U300_TIMER_APP_RDDT_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT); + writel(U300_TIMER_APP_DDDT_TIMER_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT); + + /* Reset the General Purpose timer 1. */ + writel(U300_TIMER_APP_RGPT1_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); + + /* Set up the IRQ handler */ + setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq); + + /* Reset the General Purpose timer 2 */ + writel(U300_TIMER_APP_RGPT2_TIMER_RESET, + U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2); + /* Set this timer to run around forever */ + writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC); + /* Set continuous mode so it wraps around */ + writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS, + U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M); + /* Disable timer interrupts */ + writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE); + /* Then enable the GP2 timer to use as a free running us counter */ + writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE, + U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2); + + /* This is a pure microsecond clock source */ + clocksource_u300_1mhz.mult = + clocksource_khz2mult(1000, clocksource_u300_1mhz.shift); + if (clocksource_register(&clocksource_u300_1mhz)) + printk(KERN_ERR "timer: failed to initialize clock " + "source %s\n", clocksource_u300_1mhz.name); + + clockevent_u300_1mhz.mult = + div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift); + /* 32bit counter, so 32bits delta is max */ + clockevent_u300_1mhz.max_delta_ns = + clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz); + /* This timer is slow enough to set for 1 cycle == 1 MHz */ + clockevent_u300_1mhz.min_delta_ns = + clockevent_delta2ns(1, &clockevent_u300_1mhz); + clockevent_u300_1mhz.cpumask = cpumask_of(0); + clockevents_register_device(&clockevent_u300_1mhz); + /* + * TODO: init and register the rest of the timers too, they can be + * used by hrtimers! + */ +} + +/* + * Very simple system timer that only register the clock event and + * clock source. + */ +struct sys_timer u300_timer = { + .init = u300_timer_init, +}; diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c new file mode 100644 index 000000000000..d2a0b8847a18 --- /dev/null +++ b/arch/arm/mach-u300/u300.c @@ -0,0 +1,55 @@ +/* + * + * arch/arm/mach-u300/u300.c + * + * + * Copyright (C) 2006-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Platform machine definition. + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/platform.h> +#include <mach/memory.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static void __init u300_init_machine(void) +{ + u300_init_devices(); +} + +#ifdef CONFIG_MACH_U300_BS2X +#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board" +#endif + +#ifdef CONFIG_MACH_U300_BS330 +#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board" +#endif + +#ifdef CONFIG_MACH_U300_BS335 +#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board" +#endif + +#ifdef CONFIG_MACH_U300_BS365 +#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board" +#endif + +MACHINE_START(U300, MACH_U300_STRING) + /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ + .phys_io = U300_AHB_PER_PHYS_BASE, + .io_pg_offst = ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = BOOT_PARAMS_OFFSET, + .map_io = u300_map_io, + .init_irq = u300_init_irq, + .timer = &u300_timer, + .init_machine = u300_init_machine, +MACHINE_END diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index b3bebcc5623b..69214fc8bd19 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -116,7 +116,7 @@ void __init versatile_init_irq(void) { unsigned int i; - vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0); + vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0); set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq); diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile index 0c0c1d63f1c7..d50c94f4dbdf 100644 --- a/arch/arm/mach-w90x900/Makefile +++ b/arch/arm/mach-w90x900/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o time.o +obj-y := irq.o time.o mfp-w90p910.o gpio.o clock.o # W90X900 CPU support files diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c new file mode 100644 index 000000000000..f420613cd395 --- /dev/null +++ b/arch/arm/mach-w90x900/clock.c @@ -0,0 +1,77 @@ +/* + * linux/arch/arm/mach-w90x900/clock.c + * + * Copyright (c) 2008 Nuvoton technology corporation + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> + +#include "clock.h" + +static DEFINE_SPINLOCK(clocks_lock); + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + if (clk->enabled++ == 0) + (clk->enable)(clk, 1); + spin_unlock_irqrestore(&clocks_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + WARN_ON(clk->enabled == 0); + + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->enabled == 0) + (clk->enable)(clk, 0); + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +void w90x900_clk_enable(struct clk *clk, int enable) +{ + unsigned int clocks = clk->cken; + unsigned long clken; + + clken = __raw_readl(W90X900_VA_CLKPWR); + + if (enable) + clken |= clocks; + else + clken &= ~clocks; + + __raw_writel(clken, W90X900_VA_CLKPWR); +} + +void clks_register(struct clk_lookup *clks, size_t num) +{ + int i; + + for (i = 0; i < num; i++) + clkdev_add(&clks[i]); +} diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h new file mode 100644 index 000000000000..4f27bda76d56 --- /dev/null +++ b/arch/arm/mach-w90x900/clock.h @@ -0,0 +1,36 @@ +/* + * linux/arch/arm/mach-w90x900/clock.h + * + * Copyright (c) 2008 Nuvoton technology corporation + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <asm/clkdev.h> + +void w90x900_clk_enable(struct clk *clk, int enable); +void clks_register(struct clk_lookup *clks, size_t num); + +struct clk { + unsigned long cken; + unsigned int enabled; + void (*enable)(struct clk *, int enable); +}; + +#define DEFINE_CLK(_name, _ctrlbit) \ +struct clk clk_##_name = { \ + .enable = w90x900_clk_enable, \ + .cken = (1 << _ctrlbit), \ + } + +#define DEF_CLKLOOK(_clk, _devname, _conname) \ + { \ + .clk = _clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } + diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h index de29ddcb9459..57b5dbabeb41 100644 --- a/arch/arm/mach-w90x900/cpu.h +++ b/arch/arm/mach-w90x900/cpu.h @@ -41,7 +41,7 @@ struct sys_timer; extern void w90x900_init_irq(void); extern void w90p910_init_io(struct map_desc *mach_desc, int size); extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no); -extern void w90p910_init_clocks(int xtal); +extern void w90p910_init_clocks(void); extern void w90p910_map_io(struct map_desc *mach_desc, int size); extern struct platform_device w90p910_serial_device; extern struct sys_timer w90x900_timer; diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c new file mode 100644 index 000000000000..c72e0dfa1825 --- /dev/null +++ b/arch/arm/mach-w90x900/gpio.c @@ -0,0 +1,154 @@ +/* + * linux/arch/arm/mach-w90p910/gpio.c + * + * Generic w90p910 GPIO handling + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> + +#define GPIO_BASE (W90X900_VA_GPIO) +#define GPIO_DIR (0x04) +#define GPIO_OUT (0x08) +#define GPIO_IN (0x0C) +#define GROUPINERV (0x10) +#define GPIO_GPIO(Nb) (0x00000001 << (Nb)) +#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip) + +#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio) \ + { \ + .chip = { \ + .label = name, \ + .direction_input = w90p910_dir_input, \ + .direction_output = w90p910_dir_output, \ + .get = w90p910_gpio_get, \ + .set = w90p910_gpio_set, \ + .base = base_gpio, \ + .ngpio = nr_gpio, \ + } \ + } + +struct w90p910_gpio_chip { + struct gpio_chip chip; + void __iomem *regbase; /* Base of group register*/ + spinlock_t gpio_lock; +}; + +static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip); + void __iomem *pio = w90p910_gpio->regbase + GPIO_IN; + unsigned int regval; + + regval = __raw_readl(pio); + regval &= GPIO_GPIO(offset); + + return (regval != 0); +} + +static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip); + void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT; + unsigned int regval; + unsigned long flags; + + spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags); + + regval = __raw_readl(pio); + + if (val) + regval |= GPIO_GPIO(offset); + else + regval &= ~GPIO_GPIO(offset); + + __raw_writel(regval, pio); + + spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags); +} + +static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset) +{ + struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip); + void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR; + unsigned int regval; + unsigned long flags; + + spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags); + + regval = __raw_readl(pio); + regval &= ~GPIO_GPIO(offset); + __raw_writel(regval, pio); + + spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags); + + return 0; +} + +static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val) +{ + struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip); + void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT; + void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR; + unsigned int regval; + unsigned long flags; + + spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags); + + regval = __raw_readl(pio); + regval |= GPIO_GPIO(offset); + __raw_writel(regval, pio); + + regval = __raw_readl(outreg); + + if (val) + regval |= GPIO_GPIO(offset); + else + regval &= ~GPIO_GPIO(offset); + + __raw_writel(regval, outreg); + + spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags); + + return 0; +} + +static struct w90p910_gpio_chip w90p910_gpio[] = { + W90P910_GPIO_CHIP("GROUPC", 0, 16), + W90P910_GPIO_CHIP("GROUPD", 16, 10), + W90P910_GPIO_CHIP("GROUPE", 26, 14), + W90P910_GPIO_CHIP("GROUPF", 40, 10), + W90P910_GPIO_CHIP("GROUPG", 50, 17), + W90P910_GPIO_CHIP("GROUPH", 67, 8), + W90P910_GPIO_CHIP("GROUPI", 75, 17), +}; + +void __init w90p910_init_gpio(int nr_group) +{ + unsigned i; + struct w90p910_gpio_chip *gpio_chip; + + for (i = 0; i < nr_group; i++) { + gpio_chip = &w90p910_gpio[i]; + spin_lock_init(&gpio_chip->gpio_lock); + gpio_chip->regbase = GPIO_BASE + i * GROUPINERV; + gpiochip_add(&gpio_chip->chip); + } +} diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h new file mode 100644 index 000000000000..04b37a89801c --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h new file mode 100644 index 000000000000..034da3e390c9 --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/gpio.h @@ -0,0 +1,34 @@ +/* + * linux/arch/arm/mach-w90p910/include/mach/gpio.h + * + * Generic w90p910 GPIO handling + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_W90P910_GPIO_H +#define __ASM_ARCH_W90P910_GPIO_H + +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +static inline int gpio_to_irq(unsigned gpio) +{ + return gpio; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return irq; +} + +#endif diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h index 1c583f9cbcde..9d5cba3a509f 100644 --- a/arch/arm/mach-w90x900/include/mach/irqs.h +++ b/arch/arm/mach-w90x900/include/mach/irqs.h @@ -1,8 +1,7 @@ /* * arch/arm/mach-w90x900/include/mach/irqs.h * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. + * Copyright (c) 2008 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> * @@ -10,8 +9,7 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation;version 2 of the License. * */ @@ -31,6 +29,11 @@ /* Main cpu interrupts */ #define IRQ_WDT W90X900_IRQ(1) +#define IRQ_GROUP0 W90X900_IRQ(2) +#define IRQ_GROUP1 W90X900_IRQ(3) +#define IRQ_ACTL W90X900_IRQ(4) +#define IRQ_LCD W90X900_IRQ(5) +#define IRQ_RTC W90X900_IRQ(6) #define IRQ_UART0 W90X900_IRQ(7) #define IRQ_UART1 W90X900_IRQ(8) #define IRQ_UART2 W90X900_IRQ(9) @@ -39,7 +42,45 @@ #define IRQ_TIMER0 W90X900_IRQ(12) #define IRQ_TIMER1 W90X900_IRQ(13) #define IRQ_T_INT_GROUP W90X900_IRQ(14) +#define IRQ_USBH W90X900_IRQ(15) +#define IRQ_EMCTX W90X900_IRQ(16) +#define IRQ_EMCRX W90X900_IRQ(17) +#define IRQ_GDMAGROUP W90X900_IRQ(18) +#define IRQ_DMAC W90X900_IRQ(19) +#define IRQ_FMI W90X900_IRQ(20) +#define IRQ_USBD W90X900_IRQ(21) +#define IRQ_ATAPI W90X900_IRQ(22) +#define IRQ_G2D W90X900_IRQ(23) +#define IRQ_PCI W90X900_IRQ(24) +#define IRQ_SCGROUP W90X900_IRQ(25) +#define IRQ_I2CGROUP W90X900_IRQ(26) +#define IRQ_SSP W90X900_IRQ(27) +#define IRQ_PWM W90X900_IRQ(28) +#define IRQ_KPI W90X900_IRQ(29) +#define IRQ_P2SGROUP W90X900_IRQ(30) #define IRQ_ADC W90X900_IRQ(31) #define NR_IRQS (IRQ_ADC+1) +/*for irq group*/ + +#define IRQ_PS2_PORT0 0x10000000 +#define IRQ_PS2_PORT1 0x20000000 +#define IRQ_I2C_LINE0 0x04000000 +#define IRQ_I2C_LINE1 0x08000000 +#define IRQ_SC_CARD0 0x01000000 +#define IRQ_SC_CARD1 0x02000000 +#define IRQ_GDMA_CH0 0x00100000 +#define IRQ_GDMA_CH1 0x00200000 +#define IRQ_TIMER2 0x00010000 +#define IRQ_TIMER3 0x00020000 +#define IRQ_TIMER4 0x00040000 +#define IRQ_GROUP0_IRQ0 0x00000001 +#define IRQ_GROUP0_IRQ1 0x00000002 +#define IRQ_GROUP0_IRQ2 0x00000004 +#define IRQ_GROUP0_IRQ3 0x00000008 +#define IRQ_GROUP1_IRQ4 0x00000010 +#define IRQ_GROUP1_IRQ5 0x00000020 +#define IRQ_GROUP1_IRQ6 0x00000040 +#define IRQ_GROUP1_IRQ7 0x00000080 + #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-w90x900/include/mach/map.h b/arch/arm/mach-w90x900/include/mach/map.h index 79320ebe614b..1a2095304117 100644 --- a/arch/arm/mach-w90x900/include/mach/map.h +++ b/arch/arm/mach-w90x900/include/mach/map.h @@ -1,8 +1,7 @@ /* * arch/arm/mach-w90x900/include/mach/map.h * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. + * Copyright (c) 2008 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> * @@ -10,8 +9,7 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation;version 2 of the License. * */ @@ -34,7 +32,6 @@ * interrupt controller is the first thing we put in, to make * the assembly code for the irq detection easier */ - #define W90X900_VA_IRQ W90X900_ADDR(0x00000000) #define W90X900_PA_IRQ (0xB8002000) #define W90X900_SZ_IRQ SZ_4K @@ -44,33 +41,117 @@ #define W90X900_SZ_GCR SZ_4K /* Clock and Power management */ - #define W90X900_VA_CLKPWR (W90X900_VA_GCR+0x200) #define W90X900_PA_CLKPWR (0xB0000200) #define W90X900_SZ_CLKPWR SZ_4K /* EBI management */ - #define W90X900_VA_EBI W90X900_ADDR(0x00001000) #define W90X900_PA_EBI (0xB0001000) #define W90X900_SZ_EBI SZ_4K /* UARTs */ - #define W90X900_VA_UART W90X900_ADDR(0x08000000) #define W90X900_PA_UART (0xB8000000) #define W90X900_SZ_UART SZ_4K /* Timers */ - #define W90X900_VA_TIMER W90X900_ADDR(0x08001000) #define W90X900_PA_TIMER (0xB8001000) #define W90X900_SZ_TIMER SZ_4K /* GPIO ports */ - #define W90X900_VA_GPIO W90X900_ADDR(0x08003000) #define W90X900_PA_GPIO (0xB8003000) #define W90X900_SZ_GPIO SZ_4K +/* GDMA control */ +#define W90X900_VA_GDMA W90X900_ADDR(0x00004000) +#define W90X900_PA_GDMA (0xB0004000) +#define W90X900_SZ_GDMA SZ_4K + +/* USB host controller*/ +#define W90X900_VA_USBEHCIHOST W90X900_ADDR(0x00005000) +#define W90X900_PA_USBEHCIHOST (0xB0005000) +#define W90X900_SZ_USBEHCIHOST SZ_4K + +#define W90X900_VA_USBOHCIHOST W90X900_ADDR(0x00007000) +#define W90X900_PA_USBOHCIHOST (0xB0007000) +#define W90X900_SZ_USBOHCIHOST SZ_4K + +/* I2C hardware controller */ +#define W90X900_VA_I2C W90X900_ADDR(0x08006000) +#define W90X900_PA_I2C (0xB8006000) +#define W90X900_SZ_I2C SZ_4K + +/* Keypad Interface*/ +#define W90X900_VA_KPI W90X900_ADDR(0x08008000) +#define W90X900_PA_KPI (0xB8008000) +#define W90X900_SZ_KPI SZ_4K + +/* Smart card host*/ +#define W90X900_VA_SC W90X900_ADDR(0x08005000) +#define W90X900_PA_SC (0xB8005000) +#define W90X900_SZ_SC SZ_4K + +/* LCD controller*/ +#define W90X900_VA_LCD W90X900_ADDR(0x00008000) +#define W90X900_PA_LCD (0xB0008000) +#define W90X900_SZ_LCD SZ_4K + +/* 2D controller*/ +#define W90X900_VA_GE W90X900_ADDR(0x0000B000) +#define W90X900_PA_GE (0xB000B000) +#define W90X900_SZ_GE SZ_4K + +/* ATAPI */ +#define W90X900_VA_ATAPI W90X900_ADDR(0x0000A000) +#define W90X900_PA_ATAPI (0xB000A000) +#define W90X900_SZ_ATAPI SZ_4K + +/* ADC */ +#define W90X900_VA_ADC W90X900_ADDR(0x0800A000) +#define W90X900_PA_ADC (0xB800A000) +#define W90X900_SZ_ADC SZ_4K + +/* PS2 Interface*/ +#define W90X900_VA_PS2 W90X900_ADDR(0x08009000) +#define W90X900_PA_PS2 (0xB8009000) +#define W90X900_SZ_PS2 SZ_4K + +/* RTC */ +#define W90X900_VA_RTC W90X900_ADDR(0x08004000) +#define W90X900_PA_RTC (0xB8004000) +#define W90X900_SZ_RTC SZ_4K + +/* Pulse Width Modulation(PWM) Registers */ +#define W90X900_VA_PWM W90X900_ADDR(0x08007000) +#define W90X900_PA_PWM (0xB8007000) +#define W90X900_SZ_PWM SZ_4K + +/* Audio Controller controller */ +#define W90X900_VA_ACTL W90X900_ADDR(0x00009000) +#define W90X900_PA_ACTL (0xB0009000) +#define W90X900_SZ_ACTL SZ_4K + +/* DMA controller */ +#define W90X900_VA_DMA W90X900_ADDR(0x0000c000) +#define W90X900_PA_DMA (0xB000c000) +#define W90X900_SZ_DMA SZ_4K + +/* FMI controller */ +#define W90X900_VA_FMI W90X900_ADDR(0x0000d000) +#define W90X900_PA_FMI (0xB000d000) +#define W90X900_SZ_FMI SZ_4K + +/* USB Device port */ +#define W90X900_VA_USBDEV W90X900_ADDR(0x00006000) +#define W90X900_PA_USBDEV (0xB0006000) +#define W90X900_SZ_USBDEV SZ_4K + +/* External MAC control*/ +#define W90X900_VA_EMC W90X900_ADDR(0x00003000) +#define W90X900_PA_EMC (0xB0003000) +#define W90X900_SZ_EMC SZ_4K + #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h new file mode 100644 index 000000000000..f10b6a8dc069 --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h @@ -0,0 +1,31 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-clock.h + * + * Copyright (c) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H + +/* Clock Control Registers */ +#define CLK_BA W90X900_VA_CLKPWR +#define REG_CLKEN (CLK_BA + 0x00) +#define REG_CLKSEL (CLK_BA + 0x04) +#define REG_CLKDIV (CLK_BA + 0x08) +#define REG_PLLCON0 (CLK_BA + 0x0C) +#define REG_PLLCON1 (CLK_BA + 0x10) +#define REG_PMCON (CLK_BA + 0x14) +#define REG_IRQWAKECON (CLK_BA + 0x18) +#define REG_IRQWAKEFLAG (CLK_BA + 0x1C) +#define REG_IPSRST (CLK_BA + 0x20) +#define REG_CLKEN1 (CLK_BA + 0x24) +#define REG_CLKDIV1 (CLK_BA + 0x28) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/include/mach/regs-usb.h new file mode 100644 index 000000000000..ab74b0c2480b --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-usb.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-usb.h + * + * Copyright (c) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#ifndef __ASM_ARCH_REGS_USB_H +#define __ASM_ARCH_REGS_USB_H + +/* usb Control Registers */ +#define USBH_BA W90X900_VA_USBEHCIHOST +#define USBD_BA W90X900_VA_USBDEV +#define USBO_BA W90X900_VA_USBOHCIHOST + +/* USB Host Control Registers */ +#define REG_UPSCR0 (USBH_BA+0x064) +#define REG_UPSCR1 (USBH_BA+0x068) +#define REG_USBPCR0 (USBH_BA+0x0C4) +#define REG_USBPCR1 (USBH_BA+0x0C8) + +/* USBH OHCI Control Registers */ +#define REG_OpModEn (USBO_BA+0x204) +/*This bit controls the polarity of over +*current flag from external power IC. +*/ +#define OCALow 0x08 + +#endif /* __ASM_ARCH_REGS_USB_H */ diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c index 726ff6798a56..7a62bd348e80 100644 --- a/arch/arm/mach-w90x900/mach-w90p910evb.c +++ b/arch/arm/mach-w90x900/mach-w90p910evb.c @@ -3,15 +3,13 @@ * * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche * - * Copyright (C) 2008 Nuvoton technology corporation - * All rights reserved. + * Copyright (C) 2008 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * published by the Free Software Foundation;version 2 of the License. * */ @@ -80,6 +78,156 @@ static struct platform_device w90p910_flash_device = { .num_resources = ARRAY_SIZE(w90p910_flash_resources), }; +/* USB EHCI Host Controller */ + +static struct resource w90x900_usb_ehci_resource[] = { + [0] = { + .start = W90X900_PA_USBEHCIHOST, + .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBH, + .end = IRQ_USBH, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL; + +struct platform_device w90x900_device_usb_ehci = { + .name = "w90x900-ehci", + .id = -1, + .num_resources = ARRAY_SIZE(w90x900_usb_ehci_resource), + .resource = w90x900_usb_ehci_resource, + .dev = { + .dma_mask = &w90x900_device_usb_ehci_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; +EXPORT_SYMBOL(w90x900_device_usb_ehci); + +/* USB OHCI Host Controller */ + +static struct resource w90x900_usb_ohci_resource[] = { + [0] = { + .start = W90X900_PA_USBOHCIHOST, + .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBH, + .end = IRQ_USBH, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL; +struct platform_device w90x900_device_usb_ohci = { + .name = "w90x900-ohci", + .id = -1, + .num_resources = ARRAY_SIZE(w90x900_usb_ohci_resource), + .resource = w90x900_usb_ohci_resource, + .dev = { + .dma_mask = &w90x900_device_usb_ohci_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; +EXPORT_SYMBOL(w90x900_device_usb_ohci); + +/*TouchScreen controller*/ + +static struct resource w90x900_ts_resource[] = { + [0] = { + .start = W90X900_PA_ADC, + .end = W90X900_PA_ADC + W90X900_SZ_ADC-1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ADC, + .end = IRQ_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device w90x900_device_ts = { + .name = "w90x900-ts", + .id = -1, + .resource = w90x900_ts_resource, + .num_resources = ARRAY_SIZE(w90x900_ts_resource), +}; +EXPORT_SYMBOL(w90x900_device_ts); + +/* RTC controller*/ + +static struct resource w90x900_rtc_resource[] = { + [0] = { + .start = W90X900_PA_RTC, + .end = W90X900_PA_RTC + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC, + .end = IRQ_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device w90x900_device_rtc = { + .name = "w90x900-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(w90x900_rtc_resource), + .resource = w90x900_rtc_resource, +}; +EXPORT_SYMBOL(w90x900_device_rtc); + +/* KPI controller*/ + +static struct resource w90x900_kpi_resource[] = { + [0] = { + .start = W90X900_PA_KPI, + .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_KPI, + .end = IRQ_KPI, + .flags = IORESOURCE_IRQ, + } + +}; + +struct platform_device w90x900_device_kpi = { + .name = "w90x900-kpi", + .id = -1, + .num_resources = ARRAY_SIZE(w90x900_kpi_resource), + .resource = w90x900_kpi_resource, +}; +EXPORT_SYMBOL(w90x900_device_kpi); + +/* USB Device (Gadget)*/ + +static struct resource w90x900_usbgadget_resource[] = { + [0] = { + .start = W90X900_PA_USBDEV, + .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBD, + .end = IRQ_USBD, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device w90x900_device_usbgadget = { + .name = "w90x900-usbgadget", + .id = -1, + .num_resources = ARRAY_SIZE(w90x900_usbgadget_resource), + .resource = w90x900_usbgadget_resource, +}; +EXPORT_SYMBOL(w90x900_device_usbgadget); + static struct map_desc w90p910_iodesc[] __initdata = { }; @@ -88,12 +236,18 @@ static struct map_desc w90p910_iodesc[] __initdata = { static struct platform_device *w90p910evb_dev[] __initdata = { &w90p910_serial_device, &w90p910_flash_device, + &w90x900_device_usb_ehci, + &w90x900_device_usb_ohci, + &w90x900_device_ts, + &w90x900_device_rtc, + &w90x900_device_kpi, + &w90x900_device_usbgadget, }; static void __init w90p910evb_map_io(void) { w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc)); - w90p910_init_clocks(0); + w90p910_init_clocks(); } static void __init w90p910evb_init(void) diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c new file mode 100644 index 000000000000..a3520fefb5e7 --- /dev/null +++ b/arch/arm/mach-w90x900/mfp-w90p910.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/mach-w90x900/mfp-w90p910.c + * + * Copyright (c) 2008 Nuvoton technology corporation + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/io.h> + +#include <mach/hardware.h> + +#define REG_MFSEL (W90X900_VA_GCR + 0xC) + +#define GPSELF (0x01 << 1) + +#define GPSELC (0x03 << 2) +#define ENKPI (0x02 << 2) +#define ENNAND (0x01 << 2) + +#define GPSELEI0 (0x01 << 26) +#define GPSELEI1 (0x01 << 27) + +static DECLARE_MUTEX(mfp_sem); + +void mfp_set_groupf(struct device *dev) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON(!dev); + + down(&mfp_sem); + + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + if (strcmp(dev_id, "w90p910-emc") == 0) + mfpen |= GPSELF;/*enable mac*/ + else + mfpen &= ~GPSELF;/*GPIOF[9:0]*/ + + __raw_writel(mfpen, REG_MFSEL); + + up(&mfp_sem); +} +EXPORT_SYMBOL(mfp_set_groupf); + +void mfp_set_groupc(struct device *dev) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON(!dev); + + down(&mfp_sem); + + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + if (strcmp(dev_id, "w90p910-lcd") == 0) + mfpen |= GPSELC;/*enable lcd*/ + else if (strcmp(dev_id, "w90p910-kpi") == 0) { + mfpen &= (~GPSELC);/*enable kpi*/ + mfpen |= ENKPI; + } else if (strcmp(dev_id, "w90p910-nand") == 0) { + mfpen &= (~GPSELC);/*enable nand*/ + mfpen |= ENNAND; + } else + mfpen &= (~GPSELC);/*GPIOC[14:0]*/ + + __raw_writel(mfpen, REG_MFSEL); + + up(&mfp_sem); +} +EXPORT_SYMBOL(mfp_set_groupc); + +void mfp_set_groupi(struct device *dev, int gpio) +{ + unsigned long mfpen; + const char *dev_id; + + BUG_ON(!dev); + + down(&mfp_sem); + + dev_id = dev_name(dev); + + mfpen = __raw_readl(REG_MFSEL); + + if (strcmp(dev_id, "w90p910-wdog") == 0) + mfpen |= GPSELEI1;/*enable wdog*/ + else if (strcmp(dev_id, "w90p910-atapi") == 0) + mfpen |= GPSELEI0;/*enable atapi*/ + + __raw_writel(mfpen, REG_MFSEL); + + up(&mfp_sem); +} +EXPORT_SYMBOL(mfp_set_groupi); + diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c index 2bcbaa681b99..1c97e4930b7a 100644 --- a/arch/arm/mach-w90x900/w90p910.c +++ b/arch/arm/mach-w90x900/w90p910.c @@ -3,8 +3,7 @@ * * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. + * Copyright (c) 2008 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> * @@ -12,8 +11,7 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation;version 2 of the License. * */ @@ -36,6 +34,7 @@ #include <mach/regs-serial.h> #include "cpu.h" +#include "clock.h" /* Initial IO mappings */ @@ -45,9 +44,52 @@ static struct map_desc w90p910_iodesc[] __initdata = { IODESC_ENT(UART), IODESC_ENT(TIMER), IODESC_ENT(EBI), + IODESC_ENT(USBEHCIHOST), + IODESC_ENT(USBOHCIHOST), + IODESC_ENT(ADC), + IODESC_ENT(RTC), + IODESC_ENT(KPI), + IODESC_ENT(USBDEV), /*IODESC_ENT(LCD),*/ }; +/* Initial clock declarations. */ +static DEFINE_CLK(lcd, 0); +static DEFINE_CLK(audio, 1); +static DEFINE_CLK(fmi, 4); +static DEFINE_CLK(dmac, 5); +static DEFINE_CLK(atapi, 6); +static DEFINE_CLK(emc, 7); +static DEFINE_CLK(usbd, 8); +static DEFINE_CLK(usbh, 9); +static DEFINE_CLK(g2d, 10);; +static DEFINE_CLK(pwm, 18); +static DEFINE_CLK(ps2, 24); +static DEFINE_CLK(kpi, 25); +static DEFINE_CLK(wdt, 26); +static DEFINE_CLK(gdma, 27); +static DEFINE_CLK(adc, 28); +static DEFINE_CLK(usi, 29); + +static struct clk_lookup w90p910_clkregs[] = { + DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL), + DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL), + DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL), + DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL), + DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL), + DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL), + DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL), + DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL), + DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL), + DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL), + DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL), + DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL), + DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL), + DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL), + DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL), + DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL), +}; + /* Initial serial platform data */ struct plat_serial8250_port w90p910_uart_data[] = { @@ -77,8 +119,9 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size) /*Init W90P910 clock*/ -void __init w90p910_init_clocks(int xtal) +void __init w90p910_init_clocks(void) { + clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs)); } static int __init w90p910_init_cpu(void) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 20979564e7ee..83c025e72ceb 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -391,7 +391,7 @@ config CPU_FEROCEON_OLD_ID # ARMv6 config CPU_V6 - bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB + bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX select CPU_32v6 select CPU_ABRT_EV6 select CPU_PABRT_NOIFAR @@ -416,7 +416,7 @@ config CPU_32v6K # ARMv7 config CPU_V7 - bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB + bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 @@ -639,10 +639,23 @@ config CPU_BIG_ENDIAN port must properly enable any big-endian related features of your chipset/board/processor. +config CPU_ENDIAN_BE8 + bool + depends on CPU_BIG_ENDIAN + default CPU_V6 || CPU_V7 + help + Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors. + +config CPU_ENDIAN_BE32 + bool + depends on CPU_BIG_ENDIAN + default !CPU_ENDIAN_BE8 + help + Support for the BE-32 (big-endian) mode on pre-ARMv6 processors. + config CPU_HIGH_VECTOR depends on !MMU && CPU_CP15 && !CPU_ARM740T bool "Select the High exception vector" - default n help Say Y here to select high exception vector(0xFFFF0000~). The exception vector can be vary depending on the platform @@ -726,7 +739,6 @@ config NEEDS_SYSCALL_FOR_CMPXCHG config OUTER_CACHE bool - default n config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" @@ -739,7 +751,6 @@ config CACHE_FEROCEON_L2 config CACHE_FEROCEON_L2_WRITETHROUGH bool "Force Feroceon L2 cache write through" depends on CACHE_FEROCEON_L2 - default n help Say Y here to use the Feroceon L2 cache in writethrough mode. Unless you specifically require this, say N for writeback mode. @@ -747,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 + REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX default y select OUTER_CACHE help diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 6f7e70907e44..f332df7f0d37 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -37,6 +37,9 @@ ENTRY(v6_early_abort) movne pc, lr do_thumb_abort ldreq r3, [r2] @ read aborted ARM instruction +#ifdef CONFIG_CPU_ENDIAN_BE8 + reveq r3, r3 +#endif do_ldrd_abort tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 9f88dd3be601..0ab75c60f7cf 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -110,6 +110,12 @@ static int remap_area_pages(unsigned long start, unsigned long pfn, return err; } +int ioremap_page(unsigned long virt, unsigned long phys, + const struct mem_type *mtype) +{ + return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype); +} +EXPORT_SYMBOL(ioremap_page); void __check_kvm_seq(struct mm_struct *mm) { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e6344ece00ce..fdaa9bb87c16 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -255,6 +255,7 @@ const struct mem_type *get_mem_type(unsigned int type) { return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL; } +EXPORT_SYMBOL(get_mem_type); /* * Adjust the PMD section entries according to the CPU in use. @@ -839,6 +840,20 @@ void __init reserve_node_zero(pg_data_t *pgdat) reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, BOOTMEM_EXCLUSIVE); + /* + * U300 - This platform family can share physical memory + * between two ARM cpus, one running Linux and the other + * running another OS. + */ + if (machine_is_u300()) { +#ifdef CONFIG_MACH_U300_SINGLE_RAM +#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \ + CONFIG_MACH_U300_2MB_ALIGNMENT_FIX + res_size = 0x00100000; +#endif +#endif + } + #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 087e239704df..524ddae92595 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -170,6 +170,9 @@ __v6_setup: #endif /* CONFIG_MMU */ adr r5, v6_crval ldmia r5, {r5, r6} +#ifdef CONFIG_CPU_ENDIAN_BE8 + orr r6, r6, #1 << 25 @ big-endian page tables +#endif mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index a08d9d2380d3..180a08d03a03 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -19,17 +19,23 @@ #include "proc-macros.S" -#define TTB_C (1 << 0) #define TTB_S (1 << 1) #define TTB_RGN_NC (0 << 3) #define TTB_RGN_OC_WBWA (1 << 3) #define TTB_RGN_OC_WT (2 << 3) #define TTB_RGN_OC_WB (3 << 3) +#define TTB_NOS (1 << 5) +#define TTB_IRGN_NC ((0 << 0) | (0 << 6)) +#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6)) +#define TTB_IRGN_WT ((1 << 0) | (0 << 6)) +#define TTB_IRGN_WB ((1 << 0) | (1 << 6)) #ifndef CONFIG_SMP -#define TTB_FLAGS TTB_C|TTB_RGN_OC_WB @ mark PTWs cacheable, outer WB +/* PTWs cacheable, inner WB not shareable, outer WB not shareable */ +#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB #else -#define TTB_FLAGS TTB_C|TTB_S|TTB_RGN_OC_WBWA @ mark PTWs cacheable and shared, outer WBWA +/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ +#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA #endif ENTRY(cpu_v7_proc_init) @@ -176,8 +182,8 @@ cpu_v7_name: */ __v7_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode - orr r0, r0, #(0x1 << 6) + mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and + orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting mcr p15, 0, r0, c1, c0, 1 #endif adr r12, __v7_setup_stack @ the local stack @@ -227,12 +233,43 @@ __v7_setup: mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register #endif - ldr r5, =0xff0aa1a8 - ldr r6, =0x40e040e0 + /* + * Memory region attributes with SCTLR.TRE=1 + * + * n = TEX[0],C,B + * TR = PRRR[2n+1:2n] - memory type + * IR = NMRR[2n+1:2n] - inner cacheable property + * OR = NMRR[2n+17:2n+16] - outer cacheable property + * + * n TR IR OR + * UNCACHED 000 00 + * BUFFERABLE 001 10 00 00 + * WRITETHROUGH 010 10 10 10 + * WRITEBACK 011 10 11 11 + * reserved 110 + * WRITEALLOC 111 10 01 01 + * DEV_SHARED 100 01 + * DEV_NONSHARED 100 01 + * DEV_WC 001 10 + * DEV_CACHED 011 10 + * + * Other attributes: + * + * DS0 = PRRR[16] = 0 - device shareable property + * DS1 = PRRR[17] = 1 - device shareable property + * NS0 = PRRR[18] = 0 - normal shareable property + * NS1 = PRRR[19] = 1 - normal shareable property + * NOS = PRRR[24+n] = 1 - not outer shareable + */ + ldr r5, =0xff0a81a8 @ PRRR + ldr r6, =0x40e040e0 @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR adr r5, v7_crval ldmia r5, {r5, r6} +#ifdef CONFIG_CPU_ENDIAN_BE8 + orr r6, r6, #1 << 25 @ big-endian page tables +#endif mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them @@ -240,14 +277,14 @@ __v7_setup: ENDPROC(__v7_setup) /* AT - * TFR EV X F I D LR - * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM + * TFR EV X F I D LR S + * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 1 0 110 0011 1.00 .111 1101 < we want + * 1 0 110 0011 1100 .111 1101 < we want */ .type v7_crval, #object v7_crval: - crval clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c + crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c __v7_setup_stack: .space 4 * 11 @ 11 registers diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index b637e7380ab7..a26a605b73bd 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -42,9 +42,11 @@ ENTRY(v7wbi_flush_user_tlb_range) mov r1, r1, lsl #PAGE_SHIFT vma_vm_flags r2, r2 @ get vma->vm_flags 1: - mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA (was 1) - tst r2, #VM_EXEC @ Executable area ? - mcrne p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA (was 1) +#ifdef CONFIG_SMP + mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) +#else + mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA +#endif add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b @@ -69,8 +71,11 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov r0, r0, lsl #PAGE_SHIFT mov r1, r1, lsl #PAGE_SHIFT 1: - mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA - mcr p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA +#ifdef CONFIG_SMP + mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) +#else + mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA +#endif add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b @@ -87,5 +92,5 @@ ENDPROC(v7wbi_flush_kern_tlb_range) ENTRY(v7wbi_tlb_fns) .long v7wbi_flush_user_tlb_range .long v7wbi_flush_kern_tlb_range - .long v6wbi_tlb_flags + .long v7wbi_tlb_flags .size v7wbi_tlb_fns, . - v7wbi_tlb_fns diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c index 853d42bb8682..4ce0f9801e2e 100644 --- a/arch/arm/oprofile/op_model_mpcore.c +++ b/arch/arm/oprofile/op_model_mpcore.c @@ -41,6 +41,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <mach/hardware.h> +#include <mach/board-eb.h> #include <asm/system.h> #include "op_counter.h" diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 17d0e9906d5f..8986b7412235 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR config MXC_PWM tristate "Enable PWM driver" depends on ARCH_MXC + select HAVE_PWM help Enable support for the i.MX PWM controller(s). +config ARCH_HAS_RNGA + bool + depends on ARCH_MXC + +config ARCH_MXC_IOMUX_V3 + bool endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 055406312b69..e3212c8ff421 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o +obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 89e95798cc3b..7506d963be4b 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq) _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); } +static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); + static int gpio_set_irq_type(u32 irq, u32 type) { u32 gpio = irq_to_gpio(irq); @@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u32 type) int edge; void __iomem *reg = port->base; + port->both_edges &= ~(1 << (gpio & 31)); switch (type) { case IRQ_TYPE_EDGE_RISING: edge = GPIO_INT_RISE_EDGE; @@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u32 type) case IRQ_TYPE_EDGE_FALLING: edge = GPIO_INT_FALL_EDGE; break; + case IRQ_TYPE_EDGE_BOTH: + val = mxc_gpio_get(&port->chip, gpio & 31); + if (val) { + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: set GPIO %d to low trigger\n", gpio); + } else { + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: set GPIO %d to high trigger\n", gpio); + } + port->both_edges |= 1 << (gpio & 31); + break; case IRQ_TYPE_LEVEL_LOW: edge = GPIO_INT_LOW_LEV; break; case IRQ_TYPE_LEVEL_HIGH: edge = GPIO_INT_HIGH_LEV; break; - default: /* this includes IRQ_TYPE_EDGE_BOTH */ + default: return -EINVAL; } @@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u32 type) return 0; } +static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) +{ + void __iomem *reg = port->base; + u32 bit, val; + int edge; + + reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ + bit = gpio & 0xf; + val = __raw_readl(reg); + edge = (val >> (bit << 1)) & 3; + val &= ~(0x3 << (bit << 1)); + switch (edge) { + case GPIO_INT_HIGH_LEV: + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); + break; + case GPIO_INT_LOW_LEV: + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); + break; + default: + pr_err("mxc: invalid configuration for GPIO %d: %x\n", + gpio, edge); + return; + } + __raw_writel(val | (edge << (bit << 1)), reg); +} + /* handle n interrupts in one status register */ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) { @@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) gpio_irq_no = port->virtual_irq_start; for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { + u32 gpio = irq_to_gpio(gpio_irq_no); if ((irq_stat & 1) == 0) continue; BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + + if (port->both_edges & (1 << (gpio & 31))) + mxc_flip_edge(port, gpio); + irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, &irq_desc[gpio_irq_no]); } diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h new file mode 100644 index 000000000000..8769e910e559 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h @@ -0,0 +1,22 @@ +/* + * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>. + * All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ +#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ + +#include <mach/hardware.h> + +/* mandatory for CONFIG_DEBUG_LL */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h new file mode 100644 index 000000000000..06701df74c42 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h @@ -0,0 +1,58 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__ +#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__ + +/* + * MXC UART EVB board level configurations + */ +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) + +/* + * Memory-mapped I/O on MX21ADS base board + */ +#define MX21ADS_MMIO_BASE_ADDR 0xF5000000 +#define MX21ADS_MMIO_SIZE SZ_16M + +#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ + (MX21ADS_MMIO_BASE_ADDR + (offset)) + +#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) +#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) +#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) +#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) +#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) + +/* MX21ADS_IO_REG bit definitions */ +#define MX21ADS_IO_SD_WP 0x0001 /* read */ +#define MX21ADS_IO_TP6 0x0001 /* write */ +#define MX21ADS_IO_SW_SEL 0x0002 /* read */ +#define MX21ADS_IO_TP7 0x0002 /* write */ +#define MX21ADS_IO_RESET_E_UART 0x0004 +#define MX21ADS_IO_RESET_BASE 0x0008 +#define MX21ADS_IO_CSI_CTL2 0x0010 +#define MX21ADS_IO_CSI_CTL1 0x0020 +#define MX21ADS_IO_CSI_CTL0 0x0040 +#define MX21ADS_IO_UART1_EN 0x0080 +#define MX21ADS_IO_UART4_EN 0x0100 +#define MX21ADS_IO_LCDON 0x0200 +#define MX21ADS_IO_IRDA_EN 0x0400 +#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 +#define MX21ADS_IO_IRDA_MD0_B 0x1000 +#define MX21ADS_IO_IRDA_MD1 0x2000 +#define MX21ADS_IO_LED4_ON 0x4000 +#define MX21ADS_IO_LED3_ON 0x8000 + +#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h new file mode 100644 index 000000000000..a870f8ea2443 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h @@ -0,0 +1,19 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__ +#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__ + +/* mandatory for CONFIG_DEBUG_LL */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h new file mode 100644 index 000000000000..552b55d714d8 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h @@ -0,0 +1,19 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__ +#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__ + +/* mandatory for CONFIG_DEBUG_LL */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h index 318c72ada13d..06e6895f7f65 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -114,7 +114,7 @@ #define MXC_MAX_EXP_IO_LINES 16 -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h new file mode 100644 index 000000000000..78cf31e22e4d --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on code for mobots boards, + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ +#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) + +#ifndef __ASSEMBLY__ + +enum mx31lilly_boards { + MX31LILLY_NOBOARD = 0, + MX31LILLY_DB = 1, +}; + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + */ + +extern void mx31lilly_db_init(void); + +#endif + +#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index e4e5cf5ad7db..52fbdf2d6f26 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -11,28 +11,8 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define MXC_MAX_EXP_IO_LINES 16 - - -/* - * Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M -/* - * Size of MBX buffer memory - */ -#define MXC_MBX_MEM_SIZE SZ_16M -/* - * Size of memory available to kernel - */ -#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE) - #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index f8aef1babb75..303fd2434a21 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h index 2b6b316d0f51..519bab3eb28b 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h @@ -11,9 +11,54 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__ #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) +/* Definitions for components on the Debug board */ + +/* Base address of CPLD controller on the Debug board */ +#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR) + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR CS5_BASE_ADDR + +/* CPLD config and interrupt base address */ +#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000) + +/* LED switchs */ +#define CPLD_LED_REG (CPLD_ADDR + 0x00) +/* buttons */ +#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08) +/* status, interrupt */ +#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10) +#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38) +#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40) +#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48) +/* CPLD code version */ +#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58) +/* module reset register */ +#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60) +/* CPU ID and Personality ID */ +#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68) + +/* CPLD IRQ line for external uart, external ethernet etc */ +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) + +#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0) +#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1) +#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2) +#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3) +#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4) + +#define MXC_MAX_EXP_IO_LINES 16 + #endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h new file mode 100644 index 000000000000..1111037d6d9d --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h @@ -0,0 +1,27 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__ +#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__ + +/* mandatory for CONFIG_DEBUG_LL */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h index 82232ba3c8fc..f0a1fa1938a2 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm037.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ #define __ASM_ARCH_MXC_BOARD_PCM037_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h index 750c62afd90f..4fcd7499e092 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ #define __ASM_ARCH_MXC_BOARD_PCM038_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h new file mode 100644 index 000000000000..15fbdf16abcd --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2008 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__ +#define __ASM_ARCH_MXC_BOARD_PCM043_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h index 4ff762dd45cf..04033ec637d2 100644 --- a/arch/arm/plat-mxc/include/mach/board-qong.h +++ b/arch/arm/plat-mxc/include/mach/board-qong.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__ #define __ASM_ARCH_MXC_BOARD_QONG_H__ -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index b2f9b72644db..02c3cd004db3 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -14,7 +14,11 @@ struct platform_device; struct clk; -extern void mxc_map_io(void); +extern void mx1_map_io(void); +extern void mx21_map_io(void); +extern void mx27_map_io(void); +extern void mx31_map_io(void); +extern void mx35_map_io(void); extern void mxc_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk); extern int mx1_clocks_init(unsigned long fref); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 4f773148bc20..bbc5f6753cfb 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -25,6 +25,9 @@ #ifdef CONFIG_MACH_MX27ADS #include <mach/board-mx27ads.h> #endif +#ifdef CONFIG_MACH_MX21ADS +#include <mach/board-mx21ads.h> +#endif #ifdef CONFIG_MACH_PCM038 #include <mach/board-pcm038.h> #endif @@ -34,6 +37,21 @@ #ifdef CONFIG_MACH_QONG #include <mach/board-qong.h> #endif +#ifdef CONFIG_MACH_PCM043 +#include <mach/board-pcm043.h> +#endif +#ifdef CONFIG_MACH_MX27_3DS +#include <mach/board-mx27pdk.h> +#endif +#ifdef CONFIG_MACH_ARMADILLO5X0 +#include <mach/board-armadillo5x0.h> +#endif +#ifdef CONFIG_MACH_MX35_3DS +#include <mach/board-mx35pdk.h> +#endif +#ifdef CONFIG_MACH_MX27LITE +#include <mach/board-mx27lite.h> +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index ea509f1090fb..894d2f87c856 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -35,6 +35,7 @@ struct mxc_gpio_port { int irq; int virtual_irq_start; struct gpio_chip chip; + u32 both_edges; }; int mxc_gpio_init(struct mxc_gpio_port*, int); diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index f9bd17dd8dd7..4adec9b154dd 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -24,7 +24,7 @@ struct imxuart_platform_data { int (*init)(struct platform_device *pdev); - int (*exit)(struct platform_device *pdev); + void (*exit)(struct platform_device *pdev); unsigned int flags; void (*irda_enable)(int enable); unsigned int irda_inv_rx:1; diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h index 762a7b0430e2..9f0101157ec1 100644 --- a/arch/arm/plat-mxc/include/mach/imxfb.h +++ b/arch/arm/plat-mxc/include/mach/imxfb.h @@ -76,8 +76,8 @@ struct imx_fb_platform_data { u_char * fixed_screen_cpu; dma_addr_t fixed_screen_dma; - int (*init)(struct platform_device*); - int (*exit)(struct platform_device*); + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); void (*lcd_power)(int); void (*backlight_power)(int); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 57e927a1fd3a..27f8d1b2bc6b 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -114,7 +114,7 @@ enum iomux_gp_func { * - setups the iomux according to the configuration * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib */ -int mxc_iomux_setup_pin(const unsigned int pin, const char *label); +int mxc_iomux_alloc_pin(const unsigned int pin, const char *label); /* * setups mutliple pins * convenient way to call the above function with tables @@ -633,6 +633,40 @@ enum iomux_pins { #define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) #define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h new file mode 100644 index 000000000000..00b0ac1db225 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h @@ -0,0 +1,1267 @@ +/* + * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option, NO_PAD_CTRL) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IOMUX_MX35_H__ +#define __MACH_IOMUX_MX35_H__ + +#include <mach/iomux-v3.h> + +/* + * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> see also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH */ +#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL) +#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL) + +#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL) +#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL) +#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL) + +#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL) + +#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL) + +#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL) +#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL) + +#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL) + +#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL) +#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL) +#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL) +#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL) +#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL) +#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL) +#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL) +#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL) +#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL) +#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL) +#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL) +#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL) +#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL) +#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL) +#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL) +#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL) + +#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL) +#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL) +#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL) + +#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL) +#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL) +#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL) +#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL) +#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL) +#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL) +#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL) +#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL) + +#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL) +#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL) +#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL) +#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL) +#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL) +#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL) +#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL) + +#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL) +#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL) +#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL) +#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL) +#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL) + +#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL) +#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL) +#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL) +#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL) +#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL) +#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL) +#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL) +#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL) +#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL) +#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL) +#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL) +#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL) + +#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL) +#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL) + +#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL) +#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL) + +#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6e8, 0x288, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6e8, 0x288, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6e8, 0x288, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL) + +#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL) + +#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL) +#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL) + + +#endif /* __MACH_IOMUX_MX35_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h new file mode 100644 index 000000000000..7cd84547658f --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IOMUX_V3_H__ +#define __MACH_IOMUX_V3_H__ + +/* + * build IOMUX_PAD structure + * + * This iomux scheme is based around pads, which are the physical balls + * on the processor. + * + * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls + * things like driving strength and pullup/pulldown. + * - Each pad can have but not necessarily does have an output routing register + * (IOMUXC_SW_MUX_CTL_PAD_x). + * - Each pad can have but not necessarily does have an input routing register + * (IOMUXC_x_SELECT_INPUT) + * + * The three register sets do not have a fixed offset to each other, + * hence we order this table by pad control registers (which all pads + * have) and put the optional i/o routing registers into additional + * fields. + * + * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> + * + */ + +struct pad_desc { + unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */ + unsigned mux_mode:8; + unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */ +#define NO_PAD_CTRL (1 << 16) + unsigned pad_ctrl:17; + unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */ + unsigned select_input:3; +}; + +#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \ + _select_input, _pad_ctrl) \ + { \ + .mux_ctrl_ofs = _mux_ctrl_ofs, \ + .mux_mode = _mux_mode, \ + .pad_ctrl_ofs = _pad_ctrl_ofs, \ + .pad_ctrl = _pad_ctrl, \ + .select_input_ofs = _select_input_ofs, \ + .select_input = _select_input, \ + } + +/* + * Use to set PAD control + */ +#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0 +#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1 + +#define PAD_CTL_NO_HYSTERESIS 0 +#define PAD_CTL_HYSTERESIS 1 + +#define PAD_CTL_PULL_DISABLED 0x0 +#define PAD_CTL_PULL_KEEPER 0xa +#define PAD_CTL_PULL_DOWN_100K 0xc +#define PAD_CTL_PULL_UP_47K 0xd +#define PAD_CTL_PULL_UP_100K 0xe +#define PAD_CTL_PULL_UP_22K 0xf + +#define PAD_CTL_OUTPUT_CMOS 0 +#define PAD_CTL_OUTPUT_OPEN_DRAIN 1 + +#define PAD_CTL_DRIVE_STRENGTH_NORM 0 +#define PAD_CTL_DRIVE_STRENGTH_HIGH 1 +#define PAD_CTL_DRIVE_STRENGTH_MAX 2 + +#define PAD_CTL_SLEW_RATE_SLOW 0 +#define PAD_CTL_SLEW_RATE_FAST 1 + +/* + * setups a single pad: + * - reserves the pad so that it is not claimed by another driver + * - setups the iomux according to the configuration + */ +int mxc_iomux_v3_setup_pad(struct pad_desc *pad); + +/* + * setups mutliple pads + * convenient way to call the above function with tables + */ +int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count); + +/* + * releases a single pad: + * - make it available for a future use by another driver + * - DOES NOT reconfigure the IOMUX in its reset state + */ +void mxc_iomux_v3_release_pad(struct pad_desc *pad); + +/* + * releases multiple pads + * convenvient way to call the above function with tables + */ +void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count); + +#endif /* __MACH_IOMUX_V3_H__*/ + diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index eca37d09f3f8..6065e00176ed 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -32,4 +32,12 @@ #define CONSISTENT_DMA_SIZE SZ_4M #endif /* CONFIG_MX1_VIDEO */ +#if defined(CONFIG_MX3_VIDEO) +/* + * Increase size of DMA-consistent memory region. + * This is required for mx3 camera driver to capture at least two QXGA frames. + */ +#define CONSISTENT_DMA_SIZE SZ_8M +#endif /* CONFIG_MX3_VIDEO */ + #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index b92e02324d8e..1000bf330bcd 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -179,7 +179,7 @@ #define DMA_REQ_UART1_T 30 #define DMA_REQ_UART1_R 31 -/* mandatory for CONFIG_LL_DEBUG */ +/* mandatory for CONFIG_DEBUG_LL */ #define MXC_LL_UART_PADDR UART1_BASE_ADDR #define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 3878c6085d5c..b559a4bb5769 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -48,6 +48,9 @@ #define CS4_SIZE SZ_32M #define CS5_BASE_ADDR 0xB6000000 +#define CS5_BASE_ADDR_VIRT 0xF6000000 +#define CS5_SIZE SZ_32M + #define PCMCIA_MEM_BASE_ADDR 0xBC000000 /* @@ -191,6 +194,9 @@ #define CS4_IO_ADDRESS(x) \ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) +#define CS5_IO_ADDRESS(x) \ + (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT) + #define X_MEMC_IO_ADDRESS(x) \ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h deleted file mode 100644 index 6c19a134744b..000000000000 --- a/arch/arm/plat-mxc/include/mach/mxc_timer.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * mxc_timer.h - * - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef __PLAT_MXC_TIMER_H -#define __PLAT_MXC_TIMER_H - -#include <linux/clk.h> -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_MX1 -#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) -#define TIMER_INTERRUPT TIM1_INT - -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) - -#define MXC_TCTL 0x00 -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(0, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX1 */ - -#ifdef CONFIG_ARCH_MX2 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT1 - -#define MXC_TCTL 0x00 -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX2 */ - -#ifdef CONFIG_ARCH_MX3 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT - -#define MXC_TCTL 0x00 -#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN) -#define TCTL_CLK_IPG (1<<6) -#define TCTL_FRR (1<<9) -#define TCTL_WAITEN (1<<3) - -#define MXC_TPRER 0x04 -#define MXC_TSTAT 0x08 -#define TSTAT_OF1 (1<<0) -#define TSTAT_OF2 (1<<1) -#define TSTAT_OF3 (1<<2) -#define TSTAT_IF1 (1<<3) -#define TSTAT_IF2 (1<<4) -#define TSTAT_ROV (1<<5) -#define MXC_IR 0x0c -#define MXC_TCMP 0x10 -#define MXC_TCMP2 0x14 -#define MXC_TCMP3 0x18 -#define MXC_TCR 0x1c -#define MXC_TCN 0x24 - -static inline void gpt_irq_disable(void) -{ - __raw_writel(0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(1<<0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX3 */ - -#define TCTL_SWR (1<<15) -#define TCTL_CC (1<<10) -#define TCTL_OM (1<<9) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_CAP_ENA (1<<5) -#define TCTL_TEN (1<<0) - -#endif diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h index 2dacb3086f1c..be273371f34a 100644 --- a/arch/arm/plat-mxc/include/mach/usb.h +++ b/arch/arm/plat-mxc/include/mach/usb.h @@ -17,7 +17,7 @@ struct imxusb_platform_data { int (*init)(struct device *); - int (*exit)(struct device *); + void (*exit)(struct device *); }; #endif /* __ASM_ARCH_MXC_USB */ diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c new file mode 100644 index 000000000000..77a078f9513f --- /dev/null +++ b/arch/arm/plat-mxc/iomux-v3.c @@ -0,0 +1,98 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach/map.h> +#include <mach/iomux-v3.h> + +#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR) + +static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG]; + +/* + * setups a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + */ +int mxc_iomux_v3_setup_pad(struct pad_desc *pad) +{ + unsigned int pad_ofs = pad->pad_ctrl_ofs; + + if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map)) + return -EBUSY; + if (pad->mux_ctrl_ofs) + __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs); + + if (pad->select_input_ofs) + __raw_writel(pad->select_input, + IOMUX_BASE + pad->select_input_ofs); + + if (!(pad->pad_ctrl & NO_PAD_CTRL)) + __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs); + return 0; +} +EXPORT_SYMBOL(mxc_iomux_v3_setup_pad); + +int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count) +{ + struct pad_desc *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxc_iomux_v3_setup_pad(p); + if (ret) + goto setup_error; + p++; + } + return 0; + +setup_error: + mxc_iomux_v3_release_multiple_pads(pad_list, i); + return ret; +} +EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads); + +void mxc_iomux_v3_release_pad(struct pad_desc *pad) +{ + unsigned int pad_ofs = pad->pad_ctrl_ofs; + + clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map); +} +EXPORT_SYMBOL(mxc_iomux_v3_release_pad); + +void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count) +{ + struct pad_desc *p = pad_list; + int i; + + for (i = 0; i < count; i++) { + mxc_iomux_v3_release_pad(p); + p++; + } +} +EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads); diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 0fb68a531f55..8aee76304f8f 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -24,31 +24,27 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ -#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ -#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ -#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ -#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ -#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ -#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ -#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ -#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */ -#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ -#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ -#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ -#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ -#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ -#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ -#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ -#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ -#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ -#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ - -#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) -#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) -#define IIM_PROD_REV_SH 3 -#define IIM_PROD_REV_LEN 5 +#define AVIC_INTCNTL 0x00 /* int control reg */ +#define AVIC_NIMASK 0x04 /* int mask reg */ +#define AVIC_INTENNUM 0x08 /* int enable number reg */ +#define AVIC_INTDISNUM 0x0C /* int disable number reg */ +#define AVIC_INTENABLEH 0x10 /* int enable reg high */ +#define AVIC_INTENABLEL 0x14 /* int enable reg low */ +#define AVIC_INTTYPEH 0x18 /* int type reg high */ +#define AVIC_INTTYPEL 0x1C /* int type reg low */ +#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */ +#define AVIC_NIVECSR 0x40 /* norm int vector/status */ +#define AVIC_FIVECSR 0x44 /* fast int vector/status */ +#define AVIC_INTSRCH 0x48 /* int source reg high */ +#define AVIC_INTSRCL 0x4C /* int source reg low */ +#define AVIC_INTFRCH 0x50 /* int force reg high */ +#define AVIC_INTFRCL 0x54 /* int force reg low */ +#define AVIC_NIPNDH 0x58 /* norm int pending high */ +#define AVIC_NIPNDL 0x5C /* norm int pending low */ +#define AVIC_FIPNDH 0x60 /* fast int pending high */ +#define AVIC_FIPNDL 0x64 /* fast int pending low */ + +static void __iomem *avic_base; int imx_irq_set_priority(unsigned char irq, unsigned char prio) { @@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio) if (irq >= MXC_INTERNAL_IRQS) return -EINVAL;; - temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); + temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; temp |= prio & mask; - __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); + __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8)); return 0; #else @@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) return -EINVAL; if (irq < MXC_INTERNAL_IRQS / 2) { - irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL); + irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); + __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); } else { irq -= MXC_INTERNAL_IRQS / 2; - irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq); - __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH); + irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); + __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); } return 0; @@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq); /* Disable interrupt number "irq" in the AVIC */ static void mxc_mask_irq(unsigned int irq) { - __raw_writel(irq, AVIC_INTDISNUM); + __raw_writel(irq, avic_base + AVIC_INTDISNUM); } /* Enable interrupt number "irq" in the AVIC */ static void mxc_unmask_irq(unsigned int irq) { - __raw_writel(irq, AVIC_INTENNUM); + __raw_writel(irq, avic_base + AVIC_INTENNUM); } static struct irq_chip mxc_avic_chip = { @@ -121,19 +117,21 @@ void __init mxc_init_irq(void) { int i; + avic_base = IO_ADDRESS(AVIC_BASE_ADDR); + /* put the AVIC into the reset value with * all interrupts disabled */ - __raw_writel(0, AVIC_INTCNTL); - __raw_writel(0x1f, AVIC_NIMASK); + __raw_writel(0, avic_base + AVIC_INTCNTL); + __raw_writel(0x1f, avic_base + AVIC_NIMASK); /* disable all interrupts */ - __raw_writel(0, AVIC_INTENABLEH); - __raw_writel(0, AVIC_INTENABLEL); + __raw_writel(0, avic_base + AVIC_INTENABLEH); + __raw_writel(0, avic_base + AVIC_INTENABLEL); /* all IRQ no FIQ */ - __raw_writel(0, AVIC_INTTYPEH); - __raw_writel(0, AVIC_INTTYPEL); + __raw_writel(0, avic_base + AVIC_INTTYPEH); + __raw_writel(0, avic_base + AVIC_INTTYPEL); for (i = 0; i < MXC_INTERNAL_IRQS; i++) { set_irq_chip(i, &mxc_avic_chip); set_irq_handler(i, handle_level_irq); @@ -142,7 +140,7 @@ void __init mxc_init_irq(void) /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) - __raw_writel(0, AVIC_NIPRIORITY(i)); + __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); /* init architectures chained interrupt handler */ mxc_register_gpios(); @@ -154,3 +152,4 @@ void __init mxc_init_irq(void) printk(KERN_INFO "MXC IRQ initialized\n"); } + diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 9bffbc507cc2..ae34198a79dd 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -15,65 +15,26 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/pwm.h> +#include <mach/hardware.h> + + +/* i.MX1 and i.MX21 share the same PWM function block: */ + +#define MX1_PWMC 0x00 /* PWM Control Register */ +#define MX1_PWMS 0x04 /* PWM Sample Register */ +#define MX1_PWMP 0x08 /* PWM Period Register */ + + +/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ + +#define MX3_PWMCR 0x00 /* PWM Control Register */ +#define MX3_PWMSAR 0x0C /* PWM Sample Register */ +#define MX3_PWMPR 0x10 /* PWM Period Register */ +#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define MX3_PWMCR_EN (1 << 0) + -#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21 -#define PWM_VER_1 - -#define PWMCR 0x00 /* PWM Control Register */ -#define PWMSR 0x04 /* PWM Sample Register */ -#define PWMPR 0x08 /* PWM Period Register */ -#define PWMCNR 0x0C /* PWM Counter Register */ - -#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */ -#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */ -#define PWMCR_SWR (1 << 16) /* Software Reset */ -#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */ -#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */ -#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */ -#define PWMCR_IRQ (1 << 7) /* Interrupt Request */ -#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */ -#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */ -#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */ -#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */ - -#define MAX_DIV (128 * 16) -#endif - -#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31 -#define PWM_VER_2 - -#define PWMCR 0x00 /* PWM Control Register */ -#define PWMSR 0x04 /* PWM Status Register */ -#define PWMIR 0x08 /* PWM Interrupt Register */ -#define PWMSAR 0x0C /* PWM Sample Register */ -#define PWMPR 0x10 /* PWM Period Register */ -#define PWMCNR 0x14 /* PWM Counter Register */ - -#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */ -#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */ -#define PWMCR_SWR (1 << 3) /* Software Reset */ -#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */ -#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16) -#define PWMCR_CLKSRC_OFF (0 << 16) -#define PWMCR_CLKSRC_IPG (1 << 16) -#define PWMCR_CLKSRC_IPG_HIGH (2 << 16) -#define PWMCR_CLKSRC_CLK32 (3 << 16) -#define PWMCR_POUTC -#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */ -#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */ -#define PWMCR_DBGEN (1 << 22) /* Debug Mode */ -#define PWMCR_WAITEN (1 << 23) /* Wait Mode */ -#define PWMCR_DOZEN (1 << 24) /* Doze Mode */ -#define PWMCR_STOPEN (1 << 25) /* Stop Mode */ -#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */ - -#define MAX_DIV 4096 -#endif - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ struct pwm_device { struct list_head node; @@ -91,32 +52,52 @@ struct pwm_device { int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) { - unsigned long long c; - unsigned long period_cycles, duty_cycles, prescale; - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) return -EINVAL; - c = clk_get_rate(pwm->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * duty_ns; - do_div(c, period_ns); - duty_cycles = c; - -#ifdef PWM_VER_2 - writel(duty_cycles, pwm->mmio_base + PWMSAR); - writel(period_cycles, pwm->mmio_base + PWMPR); - writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN, - pwm->mmio_base + PWMCR); -#elif defined PWM_VER_1 -#error PWM not yet working on MX1 / MX21 -#endif + if (cpu_is_mx27() || cpu_is_mx3()) { + unsigned long long c; + unsigned long period_cycles, duty_cycles, prescale; + c = clk_get_rate(pwm->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); + writel(period_cycles, pwm->mmio_base + MX3_PWMPR); + writel(MX3_PWMCR_PRESCALER(prescale - 1) | + MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN, + pwm->mmio_base + MX3_PWMCR); + } else if (cpu_is_mx1() || cpu_is_mx21()) { + /* The PWM subsystem allows for exact frequencies. However, + * I cannot connect a scope on my device to the PWM line and + * thus cannot provide the program the PWM controller + * exactly. Instead, I'm relying on the fact that the + * Bootloader (u-boot or WinCE+haret) has programmed the PWM + * function group already. So I'll just modify the PWM sample + * register to follow the ratio of duty_ns vs. period_ns + * accordingly. + * + * This is good enought for programming the brightness of + * the LCD backlight. + * + * The real implementation would divide PERCLK[0] first by + * both the prescaler (/1 .. /128) and then by CLKSEL + * (/2 .. /16). + */ + u32 max = readl(pwm->mmio_base + MX1_PWMP); + u32 p = max * duty_ns / period_ns; + writel(max - p, pwm->mmio_base + MX1_PWMS); + } else { + BUG(); + } return 0; } @@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); - diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index dab3357196fb..88fb3a57e029 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -29,22 +29,85 @@ #include <mach/hardware.h> #include <asm/mach/time.h> #include <mach/common.h> -#include <mach/mxc_timer.h> + +/* defines common for all i.MX */ +#define MXC_TCTL 0x00 +#define MXC_TCTL_TEN (1 << 0) +#define MXC_TPRER 0x04 + +/* MX1, MX21, MX27 */ +#define MX1_2_TCTL_CLK_PCLK1 (1 << 1) +#define MX1_2_TCTL_IRQEN (1 << 4) +#define MX1_2_TCTL_FRR (1 << 8) +#define MX1_2_TCMP 0x08 +#define MX1_2_TCN 0x10 +#define MX1_2_TSTAT 0x14 + +/* MX21, MX27 */ +#define MX2_TSTAT_CAPT (1 << 1) +#define MX2_TSTAT_COMP (1 << 0) + +/* MX31, MX35 */ +#define MX3_TCTL_WAITEN (1 << 3) +#define MX3_TCTL_CLK_IPG (1 << 6) +#define MX3_TCTL_FRR (1 << 9) +#define MX3_IR 0x0c +#define MX3_TSTAT 0x08 +#define MX3_TSTAT_OF1 (1 << 0) +#define MX3_TCN 0x24 +#define MX3_TCMP 0x10 static struct clock_event_device clockevent_mxc; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; -/* clock source */ +static void __iomem *timer_base; -static cycle_t mxc_get_cycles(struct clocksource *cs) +static inline void gpt_irq_disable(void) { - return __raw_readl(TIMER_BASE + MXC_TCN); + unsigned int tmp; + + if (cpu_is_mx3()) + __raw_writel(0, timer_base + MX3_IR); + else { + tmp = __raw_readl(timer_base + MXC_TCTL); + __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL); + } +} + +static inline void gpt_irq_enable(void) +{ + if (cpu_is_mx3()) + __raw_writel(1<<0, timer_base + MX3_IR); + else { + __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, + timer_base + MXC_TCTL); + } +} + +static void gpt_irq_acknowledge(void) +{ + if (cpu_is_mx1()) + __raw_writel(0, timer_base + MX1_2_TSTAT); + if (cpu_is_mx2()) + __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT); + if (cpu_is_mx3()) + __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT); +} + +static cycle_t mx1_2_get_cycles(struct clocksource *cs) +{ + return __raw_readl(timer_base + MX1_2_TCN); +} + +static cycle_t mx3_get_cycles(struct clocksource *cs) +{ + return __raw_readl(timer_base + MX3_TCN); } static struct clocksource clocksource_mxc = { .name = "mxc_timer1", .rating = 200, - .read = mxc_get_cycles, + .read = mx1_2_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, @@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); + if (cpu_is_mx3()) + clocksource_mxc.read = mx3_get_cycles; + clocksource_mxc.mult = clocksource_hz2mult(c, clocksource_mxc.shift); clocksource_register(&clocksource_mxc); @@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) /* clock event */ -static int mxc_set_next_event(unsigned long evt, +static int mx1_2_set_next_event(unsigned long evt, struct clock_event_device *unused) { unsigned long tcmp; - tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt; - __raw_writel(tcmp, TIMER_BASE + MXC_TCMP); + tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt; - return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ? + __raw_writel(tcmp, timer_base + MX1_2_TCMP); + + return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ? + -ETIME : 0; +} + +static int mx3_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + MX3_TCN) + evt; + + __raw_writel(tcmp, timer_base + MX3_TCMP); + + return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ? -ETIME : 0; } @@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_event_mode mode, if (mode != clockevent_mode) { /* Set event time into far-far future */ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3, - TIMER_BASE + MXC_TCMP); + if (cpu_is_mx3()) + __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3, + timer_base + MX3_TCMP); + else + __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3, + timer_base + MX1_2_TCMP); + /* Clear pending interrupt */ gpt_irq_acknowledge(); } @@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &clockevent_mxc; uint32_t tstat; - tstat = __raw_readl(TIMER_BASE + MXC_TSTAT); + if (cpu_is_mx3()) + tstat = __raw_readl(timer_base + MX3_TSTAT); + else + tstat = __raw_readl(timer_base + MX1_2_TSTAT); gpt_irq_acknowledge(); @@ -168,7 +256,7 @@ static struct clock_event_device clockevent_mxc = { .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .set_mode = mxc_set_mode, - .set_next_event = mxc_set_next_event, + .set_next_event = mx1_2_set_next_event, .rating = 200, }; @@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); + if (cpu_is_mx3()) + clockevent_mxc.set_next_event = mx3_set_next_event; + clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, clockevent_mxc.shift); clockevent_mxc.max_delta_ns = @@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) void __init mxc_timer_init(struct clk *timer_clk) { + uint32_t tctl_val; + int irq; + clk_enable(timer_clk); + if (cpu_is_mx1()) { +#ifdef CONFIG_ARCH_MX1 + timer_base = IO_ADDRESS(TIM1_BASE_ADDR); + irq = TIM1_INT; +#endif + } else if (cpu_is_mx2()) { +#ifdef CONFIG_ARCH_MX2 + timer_base = IO_ADDRESS(GPT1_BASE_ADDR); + irq = MXC_INT_GPT1; +#endif + } else if (cpu_is_mx3()) { +#ifdef CONFIG_ARCH_MX3 + timer_base = IO_ADDRESS(GPT1_BASE_ADDR); + irq = MXC_INT_GPT; +#endif + } else + BUG(); + /* * Initialise to a known state (all timers off, and timing reset) */ - __raw_writel(0, TIMER_BASE + MXC_TCTL); - __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */ - __raw_writel(TCTL_FRR | /* free running */ - TCTL_VAL | /* set clocksource and arch specific bits */ - TCTL_TEN, /* start the timer */ - TIMER_BASE + MXC_TCTL); + __raw_writel(0, timer_base + MXC_TCTL); + __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ + + if (cpu_is_mx3()) + tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN; + else + tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; + + __raw_writel(tctl_val, timer_base + MXC_TCTL); /* init and register the timer to the framework */ mxc_clocksource_init(timer_clk); mxc_clockevent_init(timer_clk); /* Make irqs happen */ - setup_irq(TIMER_INTERRUPT, &mxc_timer_irq); + setup_irq(irq, &mxc_timer_irq); } diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 9dd68fafb374..efe85d095190 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -23,6 +23,11 @@ config ARCH_OMAP3 select CPU_V7 select COMMON_CLKDEV +config ARCH_OMAP4 + bool "TI OMAP4" + select CPU_V7 + select ARM_GIC + endchoice comment "OMAP Feature Selections" @@ -40,7 +45,6 @@ config OMAP_DEBUG_LEDS config OMAP_DEBUG_POWERDOMAIN bool "Emit debug messages from powerdomain layer" depends on ARCH_OMAP2 || ARCH_OMAP3 - default n help Say Y here if you want to compile in powerdomain layer debugging messages for OMAP2/3. These messages can @@ -52,7 +56,6 @@ config OMAP_DEBUG_POWERDOMAIN config OMAP_DEBUG_CLOCKDOMAIN bool "Emit debug messages from clockdomain layer" depends on ARCH_OMAP2 || ARCH_OMAP3 - default n help Say Y here if you want to compile in clockdomain layer debugging messages for OMAP2/3. These messages can @@ -110,11 +113,13 @@ config OMAP_MCBSP config OMAP_MBOX_FWK tristate "Mailbox framework support" depends on ARCH_OMAP - default n help Say Y here if you want to use OMAP Mailbox framework support for DSP, IVA1.0 and IVA2 in OMAP1/2/3. +config OMAP_IOMMU + tristate + choice prompt "System timer" default OMAP_MPU_TIMER @@ -128,13 +133,13 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4 help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX, 24XX and 34XX. + currently only available for OMAP16XX, 24XX, 34XX and OMAP4. endchoice @@ -149,7 +154,7 @@ config OMAP_32K_TIMER_HZ config OMAP_DM_TIMER bool "Use dual-mode timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4 help Select this option if you want to use OMAP Dual-Mode timers. @@ -171,7 +176,7 @@ endchoice config OMAP_SERIAL_WAKE bool "Enable wake-up events for serial ports" - depends on OMAP_MUX + depends on ARCH_OMAP1 && OMAP_MUX default y help Select this option if you want to have your system wake up diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 04a100cfb8e5..a83279523958 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -13,6 +13,7 @@ obj- := obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 29efc279287a..e8c327a45a55 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -36,10 +36,40 @@ static struct clk_functions *arch_clock; * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ +/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since + * clock framework is not up , it is defined here to avoid rework in + * every driver. Also dummy prcm reset function is added */ + +/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */ +#if defined(CONFIG_ARCH_OMAP4) +struct clk *clk_get(struct device *dev, const char *id) +{ + return NULL; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +void omap2_clk_prepare_for_reboot(void) +{ +} +EXPORT_SYMBOL(omap2_clk_prepare_for_reboot); + +void omap_prcm_arch_reset(char mode) +{ +} +EXPORT_SYMBOL(omap_prcm_arch_reset); +#endif int clk_enable(struct clk *clk) { unsigned long flags; int ret = 0; + if (cpu_is_omap44xx()) + /* OMAP4 clk framework not supported yet */ + return 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; @@ -140,6 +170,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent) unsigned long flags; int ret = -EINVAL; + if (cpu_is_omap44xx()) + /* OMAP4 clk framework not supported yet */ + return 0; if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) return ret; @@ -240,13 +273,13 @@ void recalculate_root_clocks(void) } /** - * clk_init_one - initialize any fields in the struct clk before clk init + * clk_preinit - initialize any fields in the struct clk before clk init * @clk: struct clk * to initialize * * Initialize any struct clk fields needed before normal clk initialization * can run. No return value. */ -void clk_init_one(struct clk *clk) +void clk_preinit(struct clk *clk) { INIT_LIST_HEAD(&clk->children); } diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 433021f3d7cc..ebcf006406f9 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -2,6 +2,10 @@ * linux/arch/arm/plat-omap/common.c * * Code common to all OMAP machines. + * The file is created by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,7 +15,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/pm.h> #include <linux/console.h> #include <linux/serial.h> #include <linux/tty.h> @@ -175,25 +178,70 @@ console_initcall(omap_add_serial_console); * but systems won't necessarily want to spend resources that way. */ -#if defined(CONFIG_ARCH_OMAP16XX) -#define TIMER_32K_SYNCHRONIZED 0xfffbc410 -#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) -#define TIMER_32K_SYNCHRONIZED (OMAP2_32KSYNCT_BASE + 0x10) -#endif +#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 -#ifdef TIMER_32K_SYNCHRONIZED +#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) #include <linux/clocksource.h> -static cycle_t omap_32k_read(struct clocksource *cs) +#ifdef CONFIG_ARCH_OMAP16XX +static cycle_t omap16xx_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED); +} +#else +#define omap16xx_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2420 +static cycle_t omap2420_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10); +} +#else +#define omap2420_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +static cycle_t omap2430_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10); +} +#else +#define omap2430_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP34XX +static cycle_t omap34xx_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10); +} +#else +#define omap34xx_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static cycle_t omap44xx_32k_read(struct clocksource *cs) { - return omap_readl(TIMER_32K_SYNCHRONIZED); + return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10); +} +#else +#define omap44xx_32k_read NULL +#endif + +/* + * Kernel assumes that sched_clock can be called early but may not have + * things ready yet. + */ +static cycle_t omap_32k_read_dummy(struct clocksource *cs) +{ + return 0; } static struct clocksource clocksource_32k = { .name = "32k_counter", .rating = 250, - .read = omap_32k_read, + .read = omap_32k_read_dummy, .mask = CLOCKSOURCE_MASK(32), .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, @@ -207,7 +255,7 @@ unsigned long long sched_clock(void) { unsigned long long ret; - ret = (unsigned long long)omap_32k_read(&clocksource_32k); + ret = (unsigned long long)clocksource_32k.read(&clocksource_32k); ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; return ret; } @@ -220,6 +268,19 @@ static int __init omap_init_clocksource_32k(void) if (cpu_is_omap16xx() || cpu_class_is_omap2()) { struct clk *sync_32k_ick; + if (cpu_is_omap16xx()) + clocksource_32k.read = omap16xx_32k_read; + else if (cpu_is_omap2420()) + clocksource_32k.read = omap2420_32k_read; + else if (cpu_is_omap2430()) + clocksource_32k.read = omap2430_32k_read; + else if (cpu_is_omap34xx()) + clocksource_32k.read = omap34xx_32k_read; + else if (cpu_is_omap44xx()) + clocksource_32k.read = omap44xx_32k_read; + else + return -ENODEV; + sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); if (sync_32k_ick) clk_enable(sync_32k_ick); @@ -234,15 +295,13 @@ static int __init omap_init_clocksource_32k(void) } arch_initcall(omap_init_clocksource_32k); -#endif /* TIMER_32K_SYNCHRONIZED */ +#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */ /* Global address base setup code */ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -static struct omap_globals *omap2_globals; - -static void __init __omap2_set_globals(void) +static void __init __omap2_set_globals(struct omap_globals *omap2_globals) { omap2_set_globals_tap(omap2_globals); omap2_set_globals_sdrc(omap2_globals); @@ -266,8 +325,7 @@ static struct omap_globals omap242x_globals = { void __init omap2_set_globals_242x(void) { - omap2_globals = &omap242x_globals; - __omap2_set_globals(); + __omap2_set_globals(&omap242x_globals); } #endif @@ -285,8 +343,7 @@ static struct omap_globals omap243x_globals = { void __init omap2_set_globals_243x(void) { - omap2_globals = &omap243x_globals; - __omap2_set_globals(); + __omap2_set_globals(&omap243x_globals); } #endif @@ -304,8 +361,23 @@ static struct omap_globals omap343x_globals = { void __init omap2_set_globals_343x(void) { - omap2_globals = &omap343x_globals; - __omap2_set_globals(); + __omap2_set_globals(&omap343x_globals); +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) +static struct omap_globals omap4_globals = { + .class = OMAP443X_CLASS, + .tap = OMAP2_IO_ADDRESS(0x4830a000), + .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE), +}; + +void __init omap2_set_globals_443x(void) +{ + omap2_set_globals_tap(&omap4_globals); + omap2_set_globals_control(&omap4_globals); } #endif diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 87fb7ff41794..a64b692a1bfe 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -311,6 +311,8 @@ static void omap_init_wdt(void) wdt_resources[0].start = 0x49016000; /* WDT2 */ else if (cpu_is_omap343x()) wdt_resources[0].start = 0x48314000; /* WDT2 */ + else if (cpu_is_omap44xx()) + wdt_resources[0].start = 0x4a314000; else return; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 7fc8c045ad5d..def14ec265b3 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -10,6 +10,9 @@ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * Support functions for the OMAP internal DMA channels. * * This program is free software; you can redistribute it and/or modify @@ -310,41 +313,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params); void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { - u16 w; - BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap2()) { - REVISIT_24XX(); - return; - } + if (cpu_class_is_omap1()) { + u16 w; - w = dma_read(CCR2(lch)); - w &= ~0x03; + w = dma_read(CCR2(lch)); + w &= ~0x03; - switch (mode) { - case OMAP_DMA_CONSTANT_FILL: - w |= 0x01; - break; - case OMAP_DMA_TRANSPARENT_COPY: - w |= 0x02; - break; - case OMAP_DMA_COLOR_DIS: - break; - default: - BUG(); + switch (mode) { + case OMAP_DMA_CONSTANT_FILL: + w |= 0x01; + break; + case OMAP_DMA_TRANSPARENT_COPY: + w |= 0x02; + break; + case OMAP_DMA_COLOR_DIS: + break; + default: + BUG(); + } + dma_write(w, CCR2(lch)); + + w = dma_read(LCH_CTRL(lch)); + w &= ~0x0f; + /* Default is channel type 2D */ + if (mode) { + dma_write((u16)color, COLOR_L(lch)); + dma_write((u16)(color >> 16), COLOR_U(lch)); + w |= 1; /* Channel type G */ + } + dma_write(w, LCH_CTRL(lch)); } - dma_write(w, CCR2(lch)); - w = dma_read(LCH_CTRL(lch)); - w &= ~0x0f; - /* Default is channel type 2D */ - if (mode) { - dma_write((u16)color, COLOR_L(lch)); - dma_write((u16)(color >> 16), COLOR_U(lch)); - w |= 1; /* Channel type G */ + if (cpu_class_is_omap2()) { + u32 val; + + val = dma_read(CCR(lch)); + val &= ~((1 << 17) | (1 << 16)); + + switch (mode) { + case OMAP_DMA_CONSTANT_FILL: + val |= 1 << 16; + break; + case OMAP_DMA_TRANSPARENT_COPY: + val |= 1 << 17; + break; + case OMAP_DMA_COLOR_DIS: + break; + default: + BUG(); + } + dma_write(val, CCR(lch)); + + color &= 0xffffff; + dma_write(color, COLOR(lch)); } - dma_write(w, LCH_CTRL(lch)); } EXPORT_SYMBOL(omap_set_dma_color_mode); @@ -851,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = dma_read(CCR(lch)); l &= ~((1 << 6) | (1 << 26)); - if (cpu_is_omap2430() || cpu_is_omap34xx()) + if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -1199,7 +1223,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue) * Failure: -EINVAL/-ENOMEM */ int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int chain_id, u16 ch_status, + void (*callback) (int lch, u16 ch_status, void *data), int *chain_id, int no_of_chans, int chain_mode, struct omap_dma_channel_params params) @@ -1823,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) #define omap1_dma_irq_handler NULL #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) static int omap2_dma_handle_ch(int ch) { @@ -2318,6 +2343,9 @@ static int __init omap_init_dma(void) } else if (cpu_is_omap34xx()) { omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; + } else if (cpu_is_omap44xx()) { + omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE); + dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); return -ENODEV; @@ -2416,12 +2444,18 @@ static int __init omap_init_dma(void) } } - if (cpu_is_omap2430() || cpu_is_omap34xx()) + if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) - setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq); + if (cpu_class_is_omap2()) { + int irq; + if (cpu_is_omap44xx()) + irq = INT_44XX_SDMA_IRQ0; + else + irq = INT_24XX_SDMA_IRQ0; + setup_irq(irq, &omap24xx_dma_irq); + } /* FIXME: Update LCD DMA to work on 24xx */ if (cpu_class_is_omap1()) { diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 55bb99631292..7f50b6103dee 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -7,6 +7,9 @@ * OMAP2 support by Juha Yrjola * API improvements and OMAP2 clock framework support by Timo Teras * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -150,7 +153,8 @@ struct omap_dm_timer { unsigned long phys_base; int irq; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) struct clk *iclk, *fclk; #endif void __iomem *io_base; @@ -169,6 +173,9 @@ struct omap_dm_timer { #define omap3_dm_timers NULL #define omap3_dm_source_names NULL #define omap3_dm_source_clocks NULL +#define omap4_dm_timers NULL +#define omap4_dm_source_names NULL +#define omap4_dm_source_clocks NULL static struct omap_dm_timer omap1_dm_timers[] = { { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 }, @@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers); #define omap3_dm_timers NULL #define omap3_dm_source_names NULL #define omap3_dm_source_clocks NULL +#define omap4_dm_timers NULL +#define omap4_dm_source_names NULL +#define omap4_dm_source_clocks NULL static struct omap_dm_timer omap2_dm_timers[] = { { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 }, @@ -214,7 +224,7 @@ static const char *omap2_dm_source_names[] __initdata = { NULL }; -static struct clk **omap2_dm_source_clocks[3]; +static struct clk *omap2_dm_source_clocks[3]; static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers); #elif defined(CONFIG_ARCH_OMAP3) @@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers); #define omap2_dm_timers NULL #define omap2_dm_source_names NULL #define omap2_dm_source_clocks NULL +#define omap4_dm_timers NULL +#define omap4_dm_source_names NULL +#define omap4_dm_source_clocks NULL static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 }, @@ -247,9 +260,43 @@ static const char *omap3_dm_source_names[] __initdata = { NULL }; -static struct clk **omap3_dm_source_clocks[2]; +static struct clk *omap3_dm_source_clocks[2]; static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers); +#elif defined(CONFIG_ARCH_OMAP4) + +#define omap_dm_clk_enable(x) clk_enable(x) +#define omap_dm_clk_disable(x) clk_disable(x) +#define omap1_dm_timers NULL +#define omap2_dm_timers NULL +#define omap2_dm_source_names NULL +#define omap2_dm_source_clocks NULL +#define omap3_dm_timers NULL +#define omap3_dm_source_names NULL +#define omap3_dm_source_clocks NULL + +static struct omap_dm_timer omap4_dm_timers[] = { + { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 }, + { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 }, + { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 }, + { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 }, + { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 }, + { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 }, + { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 }, + { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 }, + { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 }, + { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 }, + { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 }, + { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 }, +}; +static const char *omap4_dm_source_names[] __initdata = { + "sys_ck", + "omap_32k_fck", + NULL +}; +static struct clk *omap4_dm_source_clocks[2]; +static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers); + #else #error OMAP architecture not supported! @@ -257,7 +304,7 @@ static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers); #endif static struct omap_dm_timer *dm_timers; -static char **dm_source_names; +static const char **dm_source_names; static struct clk **dm_source_clocks; static spinlock_t dm_timer_lock; @@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) } EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask); -#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { @@ -705,12 +753,16 @@ int __init omap_dm_timer_init(void) dm_timers = omap1_dm_timers; else if (cpu_is_omap24xx()) { dm_timers = omap2_dm_timers; - dm_source_names = (char **)omap2_dm_source_names; - dm_source_clocks = (struct clk **)omap2_dm_source_clocks; + dm_source_names = omap2_dm_source_names; + dm_source_clocks = omap2_dm_source_clocks; } else if (cpu_is_omap34xx()) { dm_timers = omap3_dm_timers; - dm_source_names = (char **)omap3_dm_source_names; - dm_source_clocks = (struct clk **)omap3_dm_source_clocks; + dm_source_names = omap3_dm_source_names; + dm_source_clocks = omap3_dm_source_clocks; + } else if (cpu_is_omap44xx()) { + dm_timers = omap4_dm_timers; + dm_source_names = omap4_dm_source_names; + dm_source_clocks = omap4_dm_source_clocks; } if (cpu_class_is_omap2()) @@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; timer->io_base = IO_ADDRESS(timer->phys_base); -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) if (cpu_class_is_omap2()) { char clk_name[16]; sprintf(clk_name, "gpt%d_ick", i + 1); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index ee0b21f5b094..7fd89ba8d3b5 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -6,6 +6,9 @@ * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -146,6 +149,16 @@ #define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000) #define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000) +/* + * OMAP44XX specific GPIO registers + */ +#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000) +#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000) +#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000) +#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000) +#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000) +#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000) + #define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE) struct gpio_bank { @@ -153,11 +166,13 @@ struct gpio_bank { u16 irq; u16 virtual_irq_start; int method; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) u32 suspend_wakeup; u32 saved_wakeup; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; @@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = { #endif +#ifdef CONFIG_ARCH_OMAP4 +static struct gpio_bank gpio_bank_44xx[6] = { + { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \ + METHOD_GPIO_24XX }, + { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \ + METHOD_GPIO_24XX }, +}; + +#endif + static struct gpio_bank *gpio_bank; static int gpio_bank_count; @@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) } if (cpu_is_omap24xx()) return &gpio_bank[gpio >> 5]; - if (cpu_is_omap34xx()) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) return &gpio_bank[gpio >> 5]; BUG(); return NULL; @@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio) return gpio & 0x1f; if (cpu_is_omap24xx()) return gpio & 0x1f; - if (cpu_is_omap34xx()) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) return gpio & 0x1f; return gpio & 0x0f; } @@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; - if (cpu_is_omap34xx() && gpio < 192) + if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) return 0; return -1; } @@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP850_GPIO_DIR_CONTROL; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETDATAOUT; @@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio) reg += OMAP850_GPIO_DATA_INPUT; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; break; @@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable) else goto done; - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { if (enable) clk_enable(bank->dbck); else @@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time) } EXPORT_SYMBOL(omap_set_gpio_debounce_time); -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { @@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: set_24xx_gpio_triggering(bank, gpio, trigger); break; @@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP850_GPIO_INT_STATUS; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; break; @@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; mask = 0xffffffff; @@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETIRQENABLE1; @@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: if (bank->non_wakeup_gpios & (1 << gpio)) { printk(KERN_ERR "Unable to modify wakeup on " @@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) __raw_writel(1 << offset, reg); } #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) if (bank->method == METHOD_GPIO_24XX) { /* Disable wake-up during idle for dynamic tick */ void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_850) isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif @@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset) /*---------------------------------------------------------------------*/ static int initialized; -#if !defined(CONFIG_ARCH_OMAP3) +#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)) static struct clk * gpio_ick; #endif @@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick; static struct clk * gpio5_fck; #endif -#if defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif @@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void) } #endif -#if defined(CONFIG_ARCH_OMAP3) - if (cpu_is_omap34xx()) { +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { for (i = 0; i < OMAP34XX_NR_GPIOS; i++) { sprintf(clk_name, "gpio%d_ick", i + 1); gpio_iclks[i] = clk_get(NULL, clk_name); @@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void) (rev >> 4) & 0x0f, rev & 0x0f); } #endif +#ifdef CONFIG_ARCH_OMAP4 + if (cpu_is_omap44xx()) { + int rev; + + gpio_bank_count = OMAP34XX_NR_GPIOS; + gpio_bank = gpio_bank_44xx; + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + } +#endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; @@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void) gpio_count = 32; /* 730 has 32-bit GPIOs */ } -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) if (bank->method == METHOD_GPIO_24XX) { static const u32 non_wakeup_gpios[] = { 0xe203ffc0, 0x08700040 @@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void) set_irq_chained_handler(bank->irq, gpio_irq_handler); set_irq_data(bank->irq, bank); - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { sprintf(clk_name, "gpio%d_dbck", i + 1); bank->dbck = clk_get(NULL, clk_name); if (IS_ERR(bank->dbck)) @@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void) return 0; } -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) { int i; @@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; @@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = { #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) static int workaround_enabled; @@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); @@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void) bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); #endif @@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) __raw_writel(bank->saved_fallingdetect, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(bank->saved_risingdetect, @@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void) * state. If so, generate an IRQ by software. This is * horribly racy, but it's the best we can do to work around * this silicon bug. */ -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); #endif l ^= bank->saved_datain; l &= bank->non_wakeup_gpios; if (l) { u32 old0, old1; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0); @@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void) mpuio_init(); -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) if (cpu_is_omap16xx() || cpu_class_is_omap2()) { if (ret == 0) { ret = sysdev_class_register(&omap_gpio_sysclass); @@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) irqstat = irq_desc[irq].status; #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ - defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) if (is_in && ((bank->suspend_wakeup & mask) || irqstat & IRQ_TYPE_SENSE_MASK)) { char *trigger = NULL; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a303071d5e36..8b848391f0c8 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -5,7 +5,7 @@ * * Copyright (C) 2007 Nokia Corporation. * - * Contact: Jarkko Nikula <jarkko.nikula@nokia.com> + * Contact: Jarkko Nikula <jhnikula@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 073a2c5569f0..f9f65e1ba3f1 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -22,7 +22,8 @@ struct clkops { void (*disable)(struct clk *); }; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) struct clksel_rate { u32 val; @@ -51,7 +52,7 @@ struct dpll_data { u8 max_divider; u32 max_tolerance; u16 max_multiplier; -# if defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) u8 modes; void __iomem *autoidle_reg; void __iomem *idlest_reg; @@ -83,7 +84,8 @@ struct clk { void (*init)(struct clk *); __u8 enable_bit; __s8 usecount; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) u8 fixed_div; void __iomem *clksel_reg; u32 clksel_mask; @@ -119,7 +121,7 @@ struct clk_functions { extern unsigned int mpurate; extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_init_one(struct clk *clk); +extern void clk_preinit(struct clk *clk); extern int clk_register(struct clk *clk); extern void clk_reparent(struct clk *child, struct clk *parent); extern void clk_unregister(struct clk *clk); diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index 0ecf36deb17b..fdeab421b4dc 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -33,8 +33,6 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -extern void omap_serial_init(void); -extern void omap_serial_enable_clocks(int enable); #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, @@ -62,6 +60,7 @@ struct omap_globals { void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); void omap2_set_globals_343x(void); +void omap2_set_globals_443x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index 269147f3836f..8140dbccb7bc 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -1,9 +1,9 @@ /* * arch/arm/plat-omap/include/mach/control.h * - * OMAP2/3 System Control Module definitions + * OMAP2/3/4 System Control Module definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Texas Instruments, Inc. * Copyright (C) 2007-2008 Nokia Corporation * * Written by Paul Walmsley @@ -144,6 +144,10 @@ #define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) #define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) +/* 34xx D2D idle-related pins, handled by PM core */ +#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 +#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. @@ -189,8 +193,18 @@ #define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) #define OMAP2_PBIASLITEVMODE0 (1 << 0) +/* CONTROL_IVA2_BOOTMOD bits */ +#define OMAP3_IVA2_BOOTMOD_SHIFT 0 +#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) +#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0) + +/* CONTROL_PADCONF_X bits */ +#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) +#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) + #ifndef __ASSEMBLY__ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) extern void __iomem *omap_ctrl_base_get(void); extern u8 omap_ctrl_readb(u16 offset); extern u16 omap_ctrl_readw(u16 offset); diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 98b144252364..fc60c4ebcc28 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -5,8 +5,12 @@ * * Copyright (C) 2004, 2008 Nokia Corporation * + * Copyright (C) 2009 Texas Instruments. + * * Written by Tony Lindgren <tony.lindgren@nokia.com> * + * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343) #define cpu_is_omap243x() 0 #define cpu_is_omap34xx() 0 #define cpu_is_omap343x() 0 +#define cpu_is_omap44xx() 0 +#define cpu_is_omap443x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430) # define cpu_is_omap3430() is_omap3430() #endif +# if defined(CONFIG_ARCH_OMAP4) +# undef cpu_is_omap44xx +# undef cpu_is_omap443x +# define cpu_is_omap44xx() 1 +# define cpu_is_omap443x() 1 +# endif + /* Macros to detect if we have OMAP1 or OMAP2 */ #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx()) +#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ + cpu_is_omap44xx()) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 @@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3430_REV_ES3_0 0x34303034 #define OMAP3430_REV_ES3_1 0x34304034 +#define OMAP443X_CLASS 0x44300034 + /* * omap_chip bits * diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S index 1b11f5c6a2d9..ac24050e3416 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -36,7 +36,7 @@ add \rx, \rx, #0x00004000 @ UART 3 #endif -#elif CONFIG_ARCH_OMAP3 +#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) moveq \rx, #0x48000000 @ physical base address movne \rx, #0xd8000000 @ virtual base orr \rx, \rx, #0x0006a000 diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h index 54fe9665b182..8c1eae88737e 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -48,6 +48,7 @@ /* Hardware registers for omap2 and omap3 */ #define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000) #define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000) +#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000) #define OMAP_DMA4_REVISION 0x00 #define OMAP_DMA4_GCR 0x78 @@ -144,6 +145,7 @@ #define OMAP_DMA4_CSSA_U(n) 0 #define OMAP_DMA4_CDSA_L(n) 0 #define OMAP_DMA4_CDSA_U(n) 0 +#define OMAP1_DMA_COLOR(n) 0 /*----------------------------------------------------------------------------*/ @@ -531,7 +533,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi); /* Chaining APIs */ #ifndef CONFIG_ARCH_OMAP1 extern int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int chain_id, u16 ch_status, + void (*callback) (int lch, u16 ch_status, void *data), int *chain_id, int no_of_chans, int chain_mode, diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index 2276f89671d8..56426ed45ef4 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -3,6 +3,9 @@ * * Low-level IRQ helper macros for OMAP-based platforms * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. @@ -10,6 +13,7 @@ #include <mach/hardware.h> #include <mach/io.h> #include <mach/irqs.h> +#include <asm/hardware/gic.h> #if defined(CONFIG_ARCH_OMAP1) @@ -56,15 +60,21 @@ .endm #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) -#if defined(CONFIG_ARCH_OMAP24XX) #include <mach/omap24xx.h> -#endif -#if defined(CONFIG_ARCH_OMAP34XX) #include <mach/omap34xx.h> -#endif +/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ +#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) +#elif defined(CONFIG_ARCH_OMAP34XX) +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) +#endif +#if defined(CONFIG_ARCH_OMAP4) +#include <mach/omap44xx.h> +#endif #define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ @@ -77,6 +87,7 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm +#ifndef CONFIG_ARCH_OMAP4 .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \base, =OMAP2_VA_IC_BASE ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ @@ -92,6 +103,68 @@ and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ .endm +#else + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an + * interrupt if it's between 30 and 1020. The test_for_ipi + * routine below will pick up on IPIs. + * A simple read from the controller will tell us the number + * of the highest priority enabled interrupt. + * We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =OMAP44XX_VA_GIC_CPU_BASE + ldr \irqstat, [\base, #GIC_CPU_INTACK] + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt + * on the controller, since this requires the original irqstat + * value which we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + it cc + strcc \irqstat, [\base, #GIC_CPU_EOI] + it cs + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + itt eq + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm +#endif .macro irq_prio_table .endm diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h new file mode 100644 index 000000000000..b64fbee4d567 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h @@ -0,0 +1,42 @@ +/* + * arch/arm/plat-omap/include/mach/gpmc-smc91x.h + * + * Copyright (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__ + +#define GPMC_TIMINGS_SMC91C96 (1 << 4) +#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */ +#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */ +#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */ + +struct omap_smc91x_platform_data { + int cs; + int gpio_irq; + int gpio_pwrdwn; + int gpio_reset; + int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */ + u32 flags; + int (*retime)(void); +}; + +#if defined(CONFIG_SMC91X) || \ + defined(CONFIG_SMC91X_MODULE) + +extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d); + +#else + +#define board_smc91x_data NULL + +static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d) +{ +} + +#endif +#endif diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 3dc423ed3e80..26c1fbff08aa 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -285,5 +285,6 @@ #include "omap16xx.h" #include "omap24xx.h" #include "omap34xx.h" +#include "omap44xx.h" #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h index 577f492f2d3c..886248d32b49 100644 --- a/arch/arm/plat-omap/include/mach/hwa742.h +++ b/arch/arm/plat-omap/include/mach/hwa742.h @@ -2,10 +2,6 @@ #define _HWA742_H struct hwa742_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - unsigned te_connected:1; }; diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 0610d7e2b3d7..3b2814720569 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -6,6 +6,9 @@ * Copied from arch/arm/mach-sa1100/include/mach/io.h * Copyright (C) 1997-1999 Russell King * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -157,6 +160,40 @@ #define DSP_MMU_34XX_VIRT 0xe2000000 #define DSP_MMU_34XX_SIZE SZ_4K + +#elif defined(CONFIG_ARCH_OMAP4) +/* We map both L3 and L4 on OMAP4 */ +#define L3_44XX_PHYS L3_44XX_BASE +#define L3_44XX_VIRT 0xd4000000 +#define L3_44XX_SIZE SZ_1M + +#define L4_44XX_PHYS L4_44XX_BASE +#define L4_44XX_VIRT 0xda000000 +#define L4_44XX_SIZE SZ_4M + + +#define L4_WK_44XX_PHYS L4_WK_44XX_BASE +#define L4_WK_44XX_VIRT 0xda300000 +#define L4_WK_44XX_SIZE SZ_1M + +#define L4_PER_44XX_PHYS L4_PER_44XX_BASE +#define L4_PER_44XX_VIRT 0xd8000000 +#define L4_PER_44XX_SIZE SZ_4M + +#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE +#define L4_EMU_44XX_VIRT 0xe4000000 +#define L4_EMU_44XX_SIZE SZ_64M + +#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE +#define OMAP44XX_GPMC_VIRT 0xe0000000 +#define OMAP44XX_GPMC_SIZE SZ_1M + + +#define IO_OFFSET 0x90000000 +#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ + #endif #define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h new file mode 100644 index 000000000000..769b00b4c34a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/iommu.h @@ -0,0 +1,168 @@ +/* + * omap iommu: main structures + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IOMMU_H +#define __MACH_IOMMU_H + +struct iotlb_entry { + u32 da; + u32 pa; + u32 pgsz, prsvd, valid; + union { + u16 ap; + struct { + u32 endian, elsz, mixed; + }; + }; +}; + +struct iommu { + const char *name; + struct module *owner; + struct clk *clk; + void __iomem *regbase; + struct device *dev; + + unsigned int refcount; + struct mutex iommu_lock; /* global for this whole object */ + + /* + * We don't change iopgd for a situation like pgd for a task, + * but share it globally for each iommu. + */ + u32 *iopgd; + spinlock_t page_table_lock; /* protect iopgd */ + + int nr_tlb_entries; + + struct list_head mmap; + struct mutex mmap_lock; /* protect mmap */ + + int (*isr)(struct iommu *obj); + + void *ctx; /* iommu context: registres saved area */ +}; + +struct cr_regs { + union { + struct { + u16 cam_l; + u16 cam_h; + }; + u32 cam; + }; + union { + struct { + u16 ram_l; + u16 ram_h; + }; + u32 ram; + }; +}; + +struct iotlb_lock { + short base; + short vict; +}; + +/* architecture specific functions */ +struct iommu_functions { + unsigned long version; + + int (*enable)(struct iommu *obj); + void (*disable)(struct iommu *obj); + u32 (*fault_isr)(struct iommu *obj, u32 *ra); + + void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); + void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr); + + struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e); + int (*cr_valid)(struct cr_regs *cr); + u32 (*cr_to_virt)(struct cr_regs *cr); + void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); + ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf); + + u32 (*get_pte_attr)(struct iotlb_entry *e); + + void (*save_ctx)(struct iommu *obj); + void (*restore_ctx)(struct iommu *obj); + ssize_t (*dump_ctx)(struct iommu *obj, char *buf); +}; + +struct iommu_platform_data { + const char *name; + const char *clk_name; + const int nr_tlb_entries; +}; + +#if defined(CONFIG_ARCH_OMAP1) +#error "iommu for this processor not implemented yet" +#else +#include <mach/iommu2.h> +#endif + +/* + * utilities for super page(16MB, 1MB, 64KB and 4KB) + */ + +#define iopgsz_max(bytes) \ + (((bytes) >= SZ_16M) ? SZ_16M : \ + ((bytes) >= SZ_1M) ? SZ_1M : \ + ((bytes) >= SZ_64K) ? SZ_64K : \ + ((bytes) >= SZ_4K) ? SZ_4K : 0) + +#define bytes_to_iopgsz(bytes) \ + (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \ + ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \ + ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \ + ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1) + +#define iopgsz_to_bytes(iopgsz) \ + (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \ + ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \ + ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \ + ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0) + +#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0) + +/* + * global functions + */ +extern u32 iommu_arch_version(void); + +extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); +extern u32 iotlb_cr_to_virt(struct cr_regs *cr); + +extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); +extern void flush_iotlb_page(struct iommu *obj, u32 da); +extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); +extern void flush_iotlb_all(struct iommu *obj); + +extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e); +extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); + +extern struct iommu *iommu_get(const char *name); +extern void iommu_put(struct iommu *obj); + +extern void iommu_save_ctx(struct iommu *obj); +extern void iommu_restore_ctx(struct iommu *obj); + +extern int install_iommu_arch(const struct iommu_functions *ops); +extern void uninstall_iommu_arch(const struct iommu_functions *ops); + +extern int foreach_iommu_device(void *data, + int (*fn)(struct device *, void *)); + +extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf); +extern size_t dump_tlb_entries(struct iommu *obj, char *buf); + +#endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h new file mode 100644 index 000000000000..10ad05f410e9 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/iommu2.h @@ -0,0 +1,96 @@ +/* + * omap iommu: omap2 architecture specific definitions + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IOMMU2_H +#define __MACH_IOMMU2_H + +#include <linux/io.h> + +/* + * MMU Register offsets + */ +#define MMU_REVISION 0x00 +#define MMU_SYSCONFIG 0x10 +#define MMU_SYSSTATUS 0x14 +#define MMU_IRQSTATUS 0x18 +#define MMU_IRQENABLE 0x1c +#define MMU_WALKING_ST 0x40 +#define MMU_CNTL 0x44 +#define MMU_FAULT_AD 0x48 +#define MMU_TTB 0x4c +#define MMU_LOCK 0x50 +#define MMU_LD_TLB 0x54 +#define MMU_CAM 0x58 +#define MMU_RAM 0x5c +#define MMU_GFLUSH 0x60 +#define MMU_FLUSH_ENTRY 0x64 +#define MMU_READ_CAM 0x68 +#define MMU_READ_RAM 0x6c +#define MMU_EMU_FAULT_AD 0x70 + +#define MMU_REG_SIZE 256 + +/* + * MMU Register bit definitions + */ +#define MMU_LOCK_BASE_SHIFT 10 +#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT) +#define MMU_LOCK_BASE(x) \ + ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT) + +#define MMU_LOCK_VICT_SHIFT 4 +#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT) +#define MMU_LOCK_VICT(x) \ + ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT) + +#define MMU_CAM_VATAG_SHIFT 12 +#define MMU_CAM_VATAG_MASK \ + ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT) +#define MMU_CAM_P (1 << 3) +#define MMU_CAM_V (1 << 2) +#define MMU_CAM_PGSZ_MASK 3 +#define MMU_CAM_PGSZ_1M (0 << 0) +#define MMU_CAM_PGSZ_64K (1 << 0) +#define MMU_CAM_PGSZ_4K (2 << 0) +#define MMU_CAM_PGSZ_16M (3 << 0) + +#define MMU_RAM_PADDR_SHIFT 12 +#define MMU_RAM_PADDR_MASK \ + ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT) +#define MMU_RAM_ENDIAN_SHIFT 9 +#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ELSZ_SHIFT 7 +#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT) +#define MMU_RAM_MIXED_SHIFT 6 +#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT) +#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK + +/* + * register accessors + */ +static inline u32 iommu_read_reg(struct iommu *obj, size_t offs) +{ + return __raw_readl(obj->regbase + offs); +} + +static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs) +{ + __raw_writel(val, obj->regbase + offs); +} + +#endif /* __MACH_IOMMU2_H */ diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h new file mode 100644 index 000000000000..bdc7ce5d7a4a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/iovmm.h @@ -0,0 +1,94 @@ +/* + * omap iommu: simple virtual address space management + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __IOMMU_MMAP_H +#define __IOMMU_MMAP_H + +struct iovm_struct { + struct iommu *iommu; /* iommu object which this belongs to */ + u32 da_start; /* area definition */ + u32 da_end; + u32 flags; /* IOVMF_: see below */ + struct list_head list; /* linked in ascending order */ + const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ + void *va; /* mpu side mapped address */ +}; + +/* + * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma) + * + * lower 16 bit is used for h/w and upper 16 bit is for s/w. + */ +#define IOVMF_SW_SHIFT 16 +#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT) +#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1) +#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL + +/* + * iovma: h/w flags derived from cam and ram attribute + */ +#define IOVMF_CAM_MASK (~((1 << 10) - 1)) +#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK) + +#define IOVMF_PGSZ_MASK (3 << 0) +#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M +#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K +#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K +#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M + +#define IOVMF_ENDIAN_MASK (1 << 9) +#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG +#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE + +#define IOVMF_ELSZ_MASK (3 << 7) +#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 +#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16 +#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32 +#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE + +#define IOVMF_MIXED_MASK (1 << 6) +#define IOVMF_MIXED MMU_RAM_MIXED + +/* + * iovma: s/w flags, used for mapping and umapping internally. + */ +#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT) +#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT) +#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT) + +/* "superpages" is supported just with physically linear pages */ +#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT)) +#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT)) +#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT)) + +#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) +#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT)) +#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT)) + + +extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da); +extern u32 iommu_vmap(struct iommu *obj, u32 da, + const struct sg_table *sgt, u32 flags); +extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da); +extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, + u32 flags); +extern void iommu_vfree(struct iommu *obj, const u32 da); +extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, + u32 flags); +extern void iommu_kunmap(struct iommu *obj, u32 da); +extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, + u32 flags); +extern void iommu_kfree(struct iommu *obj, u32 da); + +extern void *da_to_va(struct iommu *obj, u32 da); + +#endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 7f57ee66f364..fb7cb7723990 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -4,6 +4,9 @@ * Copyright (C) Greg Lonnon 2001 * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -422,6 +425,94 @@ #define INT_34XX_BENCH_MPU_EMUL 3 + +#define IRQ_GIC_START 32 +#define INT_44XX_LOCALTIMER_IRQ 29 +#define INT_44XX_LOCALWDT_IRQ 30 + +#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START) +#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START) +#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START) +#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START) +#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START) +#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START) +#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START) +#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START) +#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START) +#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START) +#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START) +#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START) +#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START) +#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START) +#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START) +#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START) +#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START) +#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START) +#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START) +#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START) +#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START) +#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START) +#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START) +#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START) +#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START) +#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START) +#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START) +#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START) +#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START) +#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START) +#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START) +#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START) +#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START) +#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START) +#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START) +#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START) +#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START) +#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START) +#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START) +#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START) + +#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START) +#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START) +#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START) +#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START) +#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START) +#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START) +#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START) + +#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START) +#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START) +#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START) +#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START) +#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START) +#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START) +#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START) +#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START) +#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START) +#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START) +#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START) +#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START) +#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START) +#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START) +#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START) +#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START) +#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START) + + /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 @@ -467,6 +558,7 @@ #ifndef __ASSEMBLY__ extern void omap_init_irq(void); +extern int omap_irq_pending(void); #endif #include <mach/hardware.h> diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h index 232923aaf61d..45ea3ae3c995 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/mach/keypad.h @@ -33,7 +33,11 @@ struct omap_kp_platform_data { #define GROUP_3 (3 << 16) #define GROUP_MASK GROUP_3 +#define KEY_PERSISTENT 0x00800000 +#define KEYNUM_MASK 0x00EFFFFF #define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) +#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \ + KEY_PERSISTENT) #endif diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index 99ed564d9277..9ad41dc484c1 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -38,7 +38,8 @@ */ #if defined(CONFIG_ARCH_OMAP1) #define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) #define PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h index 24335d4932f5..696edfc145a6 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/mach/omap24xx.h @@ -85,23 +85,5 @@ #define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) #define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) -#if defined(CONFIG_ARCH_OMAP2420) - -#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE -#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE -#define OMAP2_CM_BASE OMAP2420_CM_BASE -#define OMAP2_PRM_BASE OMAP2420_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - -#elif defined(CONFIG_ARCH_OMAP2430) - -#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE -#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE -#define OMAP2_CM_BASE OMAP2430_CM_BASE -#define OMAP2_PRM_BASE OMAP2430_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - -#endif - #endif /* __ASM_ARCH_OMAP24XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h index ab640151d3ec..f8d186a73712 100644 --- a/arch/arm/plat-omap/include/mach/omap34xx.h +++ b/arch/arm/plat-omap/include/mach/omap34xx.h @@ -31,13 +31,9 @@ #define L4_34XX_BASE 0x48000000 #define L4_WK_34XX_BASE 0x48300000 -#define L4_WK_OMAP_BASE L4_WK_34XX_BASE #define L4_PER_34XX_BASE 0x49000000 -#define L4_PER_OMAP_BASE L4_PER_34XX_BASE #define L4_EMU_34XX_BASE 0x54000000 -#define L4_EMU_BASE L4_EMU_34XX_BASE #define L3_34XX_BASE 0x68000000 -#define L3_OMAP_BASE L3_34XX_BASE #define OMAP3430_32KSYNCT_BASE 0x48320000 #define OMAP3430_CM_BASE 0x48004800 @@ -83,15 +79,6 @@ #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) -#if defined(CONFIG_ARCH_OMAP3430) - -#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE -#define OMAP2_CM_BASE OMAP3430_CM_BASE -#define OMAP2_PRM_BASE OMAP3430_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) - -#endif - #define OMAP34XX_DSP_BASE 0x58000000 #define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) #define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h new file mode 100644 index 000000000000..15dec7f1c7c0 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap44xx.h @@ -0,0 +1,46 @@ +/*: + * Address mappings and base address for OMAP4 interconnects + * and peripherals. + * + * Copyright (C) 2009 Texas Instruments + * + * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_OMAP44XX_H +#define __ASM_ARCH_OMAP44XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ +#define L4_44XX_BASE 0x4a000000 +#define L4_WK_44XX_BASE 0x4a300000 +#define L4_PER_44XX_BASE 0x48000000 +#define L4_EMU_44XX_BASE 0x54000000 +#define L3_44XX_BASE 0x44000000 +#define OMAP4430_32KSYNCT_BASE 0x4a304000 +#define OMAP4430_CM_BASE 0x4a004000 +#define OMAP4430_PRM_BASE 0x48306000 +#define OMAP44XX_GPMC_BASE 0x50000000 +#define OMAP443X_SCM_BASE 0x4a002000 +#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE +#define OMAP44XX_IC_BASE 0x48200000 +#define OMAP44XX_IVA_INTC_BASE 0x40000000 +#define IRQ_SIR_IRQ 0x0040 +#define OMAP44XX_GIC_DIST_BASE 0x48241000 +#define OMAP44XX_GIC_CPU_BASE 0x48240100 +#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) +#define OMAP44XX_SCU_BASE 0x48240000 +#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE) +#define OMAP44XX_LOCAL_TWD_BASE 0x48240600 +#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) +#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100 +#define OMAP44XX_WKUPGEN_BASE 0x48281000 +#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) + +#endif /* __ASM_ARCH_OMAP44XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h index 4649d302c263..72f433d7d827 100644 --- a/arch/arm/plat-omap/include/mach/onenand.h +++ b/arch/arm/plat-omap/include/mach/onenand.h @@ -9,8 +9,12 @@ * published by the Free Software Foundation. */ +#include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#define ONENAND_SYNC_READ (1 << 0) +#define ONENAND_SYNC_READWRITE (1 << 1) + struct omap_onenand_platform_data { int cs; int gpio_irq; @@ -18,8 +22,22 @@ struct omap_onenand_platform_data { int nr_parts; int (*onenand_setup)(void __iomem *, int freq); int dma_channel; + u8 flags; }; -int omap2_onenand_rephase(void); - #define ONENAND_MAX_PARTITIONS 8 + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); + +#else + +#define board_onenand_data NULL + +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} + +#endif diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 8a676a04be48..13abd02d1527 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -1,5 +1,8 @@ /* - * arch/arm/plat-omap/include/mach/serial.h + * arch/arm/plat-omap/include/mach/serial.h + * + * Copyright (C) 2009 Texas Instruments + * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -15,19 +18,28 @@ #define OMAP_UART1_BASE 0xfffb0000 #define OMAP_UART2_BASE 0xfffb0800 #define OMAP_UART3_BASE 0xfffb9800 +#define OMAP_MAX_NR_PORTS 3 #elif defined(CONFIG_ARCH_OMAP2) /* OMAP2 serial ports */ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x4806e000 +#define OMAP_MAX_NR_PORTS 3 #elif defined(CONFIG_ARCH_OMAP3) /* OMAP3 serial ports */ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x49020000 +#define OMAP_MAX_NR_PORTS 3 +#elif defined(CONFIG_ARCH_OMAP4) +/* OMAP4 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x48020000 +#define OMAP_UART4_BASE 0x4806e000 +#define OMAP_MAX_NR_PORTS 4 #endif -#define OMAP_MAX_NR_PORTS 3 #define OMAP1510_BASE_BAUD (12000000/16) #define OMAP16XX_BASE_BAUD (48000000/16) #define OMAP24XX_BASE_BAUD (48000000/16) @@ -40,4 +52,13 @@ __ret; \ }) +#ifndef __ASSEMBLER__ +extern void omap_serial_init(void); +extern int omap_uart_can_sleep(void); +extern void omap_uart_check_wakeup(void); +extern void omap_uart_prepare_suspend(void); +extern void omap_uart_prepare_idle(int num); +extern void omap_uart_resume_idle(int num); +#endif + #endif diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/mach/smp.h new file mode 100644 index 000000000000..dcaa8fde7063 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/smp.h @@ -0,0 +1,51 @@ +/* + * OMAP4 machine specific smp.h + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Interface functions needed for the SMP. This file is based on arm + * realview smp platform. + * Copyright (c) 2003 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OMAP_ARCH_SMP_H +#define OMAP_ARCH_SMP_H + +#include <asm/hardware/gic.h> + +/* + * set_event() is used to wake up secondary core from wfe using sev. ROM + * code puts the second core into wfe(standby). + * + */ +#define set_event() __asm__ __volatile__ ("sev" : : : "memory") + +/* Needed for secondary core boot */ +extern void omap_secondary_startup(void); + +/* + * We use Soft IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} + +/* + * Read MPIDR: Multiprocessor affinity register + */ +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +#endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index ab35d622dcf5..dca7c16ae903 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2); + u32 sdrc_actim_ctrlb, u32 m2, + u32 unlock_dll); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz; extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2); + u32 sdrc_actim_ctrlb, u32 m2, + u32 unlock_dll); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h index 69f0ceed500b..f337e1761e2c 100644 --- a/arch/arm/plat-omap/include/mach/usb.h +++ b/arch/arm/plat-omap/include/mach/usb.h @@ -27,13 +27,7 @@ #define UDC_BASE OMAP2_UDC_BASE #define OMAP_OHCI_BASE OMAP2_OHCI_BASE -#ifdef CONFIG_USB_MUSB_SOC extern void usb_musb_init(void); -#else -static inline void usb_musb_init(void) -{ -} -#endif #endif diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h index dc104cd96197..b97dfafeebda 100644 --- a/arch/arm/plat-omap/include/mach/vmalloc.h +++ b/arch/arm/plat-omap/include/mach/vmalloc.h @@ -17,5 +17,5 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index af326efc1ad3..9b42d72d96cf 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -1,3 +1,14 @@ +/* + * Common io.c file + * This file is created by Russell King <rmk+kernel@arm.linux.org.uk> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ #include <linux/module.h> #include <linux/io.h> #include <linux/mm.h> @@ -7,6 +18,7 @@ #include <mach/omap16xx.h> #include <mach/omap24xx.h> #include <mach/omap34xx.h> +#include <mach/omap44xx.h> #define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) @@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT); } #endif - +#ifdef CONFIG_ARCH_OMAP4 + if (cpu_is_omap44xx()) { + if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE)) + return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT); + if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE)) + return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT); + if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE)) + return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT); + if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) + return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); + if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) + return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); + if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE)) + return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT); + } +#endif return __arm_ioremap(p, size, type); } EXPORT_SYMBOL(omap_ioremap); diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c new file mode 100644 index 000000000000..4cf449fa2cb5 --- /dev/null +++ b/arch/arm/plat-omap/iommu.c @@ -0,0 +1,996 @@ +/* + * omap iommu: tlb and pagetable primitives + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, + * Paul Mundt and Toshihiro Kobayashi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <asm/cacheflush.h> + +#include <mach/iommu.h> + +#include "iopgtable.h" + +/* accommodate the difference between omap1 and omap2/3 */ +static const struct iommu_functions *arch_iommu; + +static struct platform_driver omap_iommu_driver; +static struct kmem_cache *iopte_cachep; + +/** + * install_iommu_arch - Install archtecure specific iommu functions + * @ops: a pointer to architecture specific iommu functions + * + * There are several kind of iommu algorithm(tlb, pagetable) among + * omap series. This interface installs such an iommu algorighm. + **/ +int install_iommu_arch(const struct iommu_functions *ops) +{ + if (arch_iommu) + return -EBUSY; + + arch_iommu = ops; + return 0; +} +EXPORT_SYMBOL_GPL(install_iommu_arch); + +/** + * uninstall_iommu_arch - Uninstall archtecure specific iommu functions + * @ops: a pointer to architecture specific iommu functions + * + * This interface uninstalls the iommu algorighm installed previously. + **/ +void uninstall_iommu_arch(const struct iommu_functions *ops) +{ + if (arch_iommu != ops) + pr_err("%s: not your arch\n", __func__); + + arch_iommu = NULL; +} +EXPORT_SYMBOL_GPL(uninstall_iommu_arch); + +/** + * iommu_save_ctx - Save registers for pm off-mode support + * @obj: target iommu + **/ +void iommu_save_ctx(struct iommu *obj) +{ + arch_iommu->save_ctx(obj); +} +EXPORT_SYMBOL_GPL(iommu_save_ctx); + +/** + * iommu_restore_ctx - Restore registers for pm off-mode support + * @obj: target iommu + **/ +void iommu_restore_ctx(struct iommu *obj) +{ + arch_iommu->restore_ctx(obj); +} +EXPORT_SYMBOL_GPL(iommu_restore_ctx); + +/** + * iommu_arch_version - Return running iommu arch version + **/ +u32 iommu_arch_version(void) +{ + return arch_iommu->version; +} +EXPORT_SYMBOL_GPL(iommu_arch_version); + +static int iommu_enable(struct iommu *obj) +{ + int err; + + if (!obj) + return -EINVAL; + + clk_enable(obj->clk); + + err = arch_iommu->enable(obj); + + clk_disable(obj->clk); + return err; +} + +static void iommu_disable(struct iommu *obj) +{ + if (!obj) + return; + + clk_enable(obj->clk); + + arch_iommu->disable(obj); + + clk_disable(obj->clk); +} + +/* + * TLB operations + */ +void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) +{ + BUG_ON(!cr || !e); + + arch_iommu->cr_to_e(cr, e); +} +EXPORT_SYMBOL_GPL(iotlb_cr_to_e); + +static inline int iotlb_cr_valid(struct cr_regs *cr) +{ + if (!cr) + return -EINVAL; + + return arch_iommu->cr_valid(cr); +} + +static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj, + struct iotlb_entry *e) +{ + if (!e) + return NULL; + + return arch_iommu->alloc_cr(obj, e); +} + +u32 iotlb_cr_to_virt(struct cr_regs *cr) +{ + return arch_iommu->cr_to_virt(cr); +} +EXPORT_SYMBOL_GPL(iotlb_cr_to_virt); + +static u32 get_iopte_attr(struct iotlb_entry *e) +{ + return arch_iommu->get_pte_attr(e); +} + +static u32 iommu_report_fault(struct iommu *obj, u32 *da) +{ + return arch_iommu->fault_isr(obj, da); +} + +static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l) +{ + u32 val; + + val = iommu_read_reg(obj, MMU_LOCK); + + l->base = MMU_LOCK_BASE(val); + l->vict = MMU_LOCK_VICT(val); + + BUG_ON(l->base != 0); /* Currently no preservation is used */ +} + +static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l) +{ + u32 val; + + BUG_ON(l->base != 0); /* Currently no preservation is used */ + + val = (l->base << MMU_LOCK_BASE_SHIFT); + val |= (l->vict << MMU_LOCK_VICT_SHIFT); + + iommu_write_reg(obj, val, MMU_LOCK); +} + +static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr) +{ + arch_iommu->tlb_read_cr(obj, cr); +} + +static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr) +{ + arch_iommu->tlb_load_cr(obj, cr); + + iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); + iommu_write_reg(obj, 1, MMU_LD_TLB); +} + +/** + * iotlb_dump_cr - Dump an iommu tlb entry into buf + * @obj: target iommu + * @cr: contents of cam and ram register + * @buf: output buffer + **/ +static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr, + char *buf) +{ + BUG_ON(!cr || !buf); + + return arch_iommu->dump_cr(obj, cr, buf); +} + +/** + * load_iotlb_entry - Set an iommu tlb entry + * @obj: target iommu + * @e: an iommu tlb entry info + **/ +int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e) +{ + int i; + int err = 0; + struct iotlb_lock l; + struct cr_regs *cr; + + if (!obj || !obj->nr_tlb_entries || !e) + return -EINVAL; + + clk_enable(obj->clk); + + for (i = 0; i < obj->nr_tlb_entries; i++) { + struct cr_regs tmp; + + iotlb_lock_get(obj, &l); + l.vict = i; + iotlb_lock_set(obj, &l); + iotlb_read_cr(obj, &tmp); + if (!iotlb_cr_valid(&tmp)) + break; + } + + if (i == obj->nr_tlb_entries) { + dev_dbg(obj->dev, "%s: full: no entry\n", __func__); + err = -EBUSY; + goto out; + } + + cr = iotlb_alloc_cr(obj, e); + if (IS_ERR(cr)) { + clk_disable(obj->clk); + return PTR_ERR(cr); + } + + iotlb_load_cr(obj, cr); + kfree(cr); + + /* increment victim for next tlb load */ + if (++l.vict == obj->nr_tlb_entries) + l.vict = 0; + iotlb_lock_set(obj, &l); +out: + clk_disable(obj->clk); + return err; +} +EXPORT_SYMBOL_GPL(load_iotlb_entry); + +/** + * flush_iotlb_page - Clear an iommu tlb entry + * @obj: target iommu + * @da: iommu device virtual address + * + * Clear an iommu tlb entry which includes 'da' address. + **/ +void flush_iotlb_page(struct iommu *obj, u32 da) +{ + struct iotlb_lock l; + int i; + + clk_enable(obj->clk); + + for (i = 0; i < obj->nr_tlb_entries; i++) { + struct cr_regs cr; + u32 start; + size_t bytes; + + iotlb_lock_get(obj, &l); + l.vict = i; + iotlb_lock_set(obj, &l); + iotlb_read_cr(obj, &cr); + if (!iotlb_cr_valid(&cr)) + continue; + + start = iotlb_cr_to_virt(&cr); + bytes = iopgsz_to_bytes(cr.cam & 3); + + if ((start <= da) && (da < start + bytes)) { + dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", + __func__, start, da, bytes); + + iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); + } + } + clk_disable(obj->clk); + + if (i == obj->nr_tlb_entries) + dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da); +} +EXPORT_SYMBOL_GPL(flush_iotlb_page); + +/** + * flush_iotlb_range - Clear an iommu tlb entries + * @obj: target iommu + * @start: iommu device virtual address(start) + * @end: iommu device virtual address(end) + * + * Clear an iommu tlb entry which includes 'da' address. + **/ +void flush_iotlb_range(struct iommu *obj, u32 start, u32 end) +{ + u32 da = start; + + while (da < end) { + flush_iotlb_page(obj, da); + /* FIXME: Optimize for multiple page size */ + da += IOPTE_SIZE; + } +} +EXPORT_SYMBOL_GPL(flush_iotlb_range); + +/** + * flush_iotlb_all - Clear all iommu tlb entries + * @obj: target iommu + **/ +void flush_iotlb_all(struct iommu *obj) +{ + struct iotlb_lock l; + + clk_enable(obj->clk); + + l.base = 0; + l.vict = 0; + iotlb_lock_set(obj, &l); + + iommu_write_reg(obj, 1, MMU_GFLUSH); + + clk_disable(obj->clk); +} +EXPORT_SYMBOL_GPL(flush_iotlb_all); + +#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE) + +ssize_t iommu_dump_ctx(struct iommu *obj, char *buf) +{ + ssize_t bytes; + + if (!obj || !buf) + return -EINVAL; + + clk_enable(obj->clk); + + bytes = arch_iommu->dump_ctx(obj, buf); + + clk_disable(obj->clk); + + return bytes; +} +EXPORT_SYMBOL_GPL(iommu_dump_ctx); + +static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs) +{ + int i; + struct iotlb_lock saved, l; + struct cr_regs *p = crs; + + clk_enable(obj->clk); + + iotlb_lock_get(obj, &saved); + memcpy(&l, &saved, sizeof(saved)); + + for (i = 0; i < obj->nr_tlb_entries; i++) { + struct cr_regs tmp; + + iotlb_lock_get(obj, &l); + l.vict = i; + iotlb_lock_set(obj, &l); + iotlb_read_cr(obj, &tmp); + if (!iotlb_cr_valid(&tmp)) + continue; + + *p++ = tmp; + } + iotlb_lock_set(obj, &saved); + clk_disable(obj->clk); + + return p - crs; +} + +/** + * dump_tlb_entries - dump cr arrays to given buffer + * @obj: target iommu + * @buf: output buffer + **/ +size_t dump_tlb_entries(struct iommu *obj, char *buf) +{ + int i, n; + struct cr_regs *cr; + char *p = buf; + + cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL); + if (!cr) + return 0; + + n = __dump_tlb_entries(obj, cr); + for (i = 0; i < n; i++) + p += iotlb_dump_cr(obj, cr + i, p); + kfree(cr); + + return p - buf; +} +EXPORT_SYMBOL_GPL(dump_tlb_entries); + +int foreach_iommu_device(void *data, int (*fn)(struct device *, void *)) +{ + return driver_for_each_device(&omap_iommu_driver.driver, + NULL, data, fn); +} +EXPORT_SYMBOL_GPL(foreach_iommu_device); + +#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */ + +/* + * H/W pagetable operations + */ +static void flush_iopgd_range(u32 *first, u32 *last) +{ + /* FIXME: L2 cache should be taken care of if it exists */ + do { + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd" + : : "r" (first)); + first += L1_CACHE_BYTES / sizeof(*first); + } while (first <= last); +} + +static void flush_iopte_range(u32 *first, u32 *last) +{ + /* FIXME: L2 cache should be taken care of if it exists */ + do { + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte" + : : "r" (first)); + first += L1_CACHE_BYTES / sizeof(*first); + } while (first <= last); +} + +static void iopte_free(u32 *iopte) +{ + /* Note: freed iopte's must be clean ready for re-use */ + kmem_cache_free(iopte_cachep, iopte); +} + +static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da) +{ + u32 *iopte; + + /* a table has already existed */ + if (*iopgd) + goto pte_ready; + + /* + * do the allocation outside the page table lock + */ + spin_unlock(&obj->page_table_lock); + iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL); + spin_lock(&obj->page_table_lock); + + if (!*iopgd) { + if (!iopte) + return ERR_PTR(-ENOMEM); + + *iopgd = virt_to_phys(iopte) | IOPGD_TABLE; + flush_iopgd_range(iopgd, iopgd); + + dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte); + } else { + /* We raced, free the reduniovant table */ + iopte_free(iopte); + } + +pte_ready: + iopte = iopte_offset(iopgd, da); + + dev_vdbg(obj->dev, + "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", + __func__, da, iopgd, *iopgd, iopte, *iopte); + + return iopte; +} + +static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot) +{ + u32 *iopgd = iopgd_offset(obj, da); + + *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION; + flush_iopgd_range(iopgd, iopgd); + return 0; +} + +static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot) +{ + u32 *iopgd = iopgd_offset(obj, da); + int i; + + for (i = 0; i < 16; i++) + *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER; + flush_iopgd_range(iopgd, iopgd + 15); + return 0; +} + +static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot) +{ + u32 *iopgd = iopgd_offset(obj, da); + u32 *iopte = iopte_alloc(obj, iopgd, da); + + if (IS_ERR(iopte)) + return PTR_ERR(iopte); + + *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL; + flush_iopte_range(iopte, iopte); + + dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n", + __func__, da, pa, iopte, *iopte); + + return 0; +} + +static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot) +{ + u32 *iopgd = iopgd_offset(obj, da); + u32 *iopte = iopte_alloc(obj, iopgd, da); + int i; + + if (IS_ERR(iopte)) + return PTR_ERR(iopte); + + for (i = 0; i < 16; i++) + *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE; + flush_iopte_range(iopte, iopte + 15); + return 0; +} + +static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e) +{ + int (*fn)(struct iommu *, u32, u32, u32); + u32 prot; + int err; + + if (!obj || !e) + return -EINVAL; + + switch (e->pgsz) { + case MMU_CAM_PGSZ_16M: + fn = iopgd_alloc_super; + break; + case MMU_CAM_PGSZ_1M: + fn = iopgd_alloc_section; + break; + case MMU_CAM_PGSZ_64K: + fn = iopte_alloc_large; + break; + case MMU_CAM_PGSZ_4K: + fn = iopte_alloc_page; + break; + default: + fn = NULL; + BUG(); + break; + } + + prot = get_iopte_attr(e); + + spin_lock(&obj->page_table_lock); + err = fn(obj, e->da, e->pa, prot); + spin_unlock(&obj->page_table_lock); + + return err; +} + +/** + * iopgtable_store_entry - Make an iommu pte entry + * @obj: target iommu + * @e: an iommu tlb entry info + **/ +int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e) +{ + int err; + + flush_iotlb_page(obj, e->da); + err = iopgtable_store_entry_core(obj, e); +#ifdef PREFETCH_IOTLB + if (!err) + load_iotlb_entry(obj, e); +#endif + return err; +} +EXPORT_SYMBOL_GPL(iopgtable_store_entry); + +/** + * iopgtable_lookup_entry - Lookup an iommu pte entry + * @obj: target iommu + * @da: iommu device virtual address + * @ppgd: iommu pgd entry pointer to be returned + * @ppte: iommu pte entry pointer to be returned + **/ +void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte) +{ + u32 *iopgd, *iopte = NULL; + + iopgd = iopgd_offset(obj, da); + if (!*iopgd) + goto out; + + if (*iopgd & IOPGD_TABLE) + iopte = iopte_offset(iopgd, da); +out: + *ppgd = iopgd; + *ppte = iopte; +} +EXPORT_SYMBOL_GPL(iopgtable_lookup_entry); + +static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) +{ + size_t bytes; + u32 *iopgd = iopgd_offset(obj, da); + int nent = 1; + + if (!*iopgd) + return 0; + + if (*iopgd & IOPGD_TABLE) { + int i; + u32 *iopte = iopte_offset(iopgd, da); + + bytes = IOPTE_SIZE; + if (*iopte & IOPTE_LARGE) { + nent *= 16; + /* rewind to the 1st entry */ + iopte = (u32 *)((u32)iopte & IOLARGE_MASK); + } + bytes *= nent; + memset(iopte, 0, nent * sizeof(*iopte)); + flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte)); + + /* + * do table walk to check if this table is necessary or not + */ + iopte = iopte_offset(iopgd, 0); + for (i = 0; i < PTRS_PER_IOPTE; i++) + if (iopte[i]) + goto out; + + iopte_free(iopte); + nent = 1; /* for the next L1 entry */ + } else { + bytes = IOPGD_SIZE; + if (*iopgd & IOPGD_SUPER) { + nent *= 16; + /* rewind to the 1st entry */ + iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK); + } + bytes *= nent; + } + memset(iopgd, 0, nent * sizeof(*iopgd)); + flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd)); +out: + return bytes; +} + +/** + * iopgtable_clear_entry - Remove an iommu pte entry + * @obj: target iommu + * @da: iommu device virtual address + **/ +size_t iopgtable_clear_entry(struct iommu *obj, u32 da) +{ + size_t bytes; + + spin_lock(&obj->page_table_lock); + + bytes = iopgtable_clear_entry_core(obj, da); + flush_iotlb_page(obj, da); + + spin_unlock(&obj->page_table_lock); + + return bytes; +} +EXPORT_SYMBOL_GPL(iopgtable_clear_entry); + +static void iopgtable_clear_entry_all(struct iommu *obj) +{ + int i; + + spin_lock(&obj->page_table_lock); + + for (i = 0; i < PTRS_PER_IOPGD; i++) { + u32 da; + u32 *iopgd; + + da = i << IOPGD_SHIFT; + iopgd = iopgd_offset(obj, da); + + if (!*iopgd) + continue; + + if (*iopgd & IOPGD_TABLE) + iopte_free(iopte_offset(iopgd, 0)); + + *iopgd = 0; + flush_iopgd_range(iopgd, iopgd); + } + + flush_iotlb_all(obj); + + spin_unlock(&obj->page_table_lock); +} + +/* + * Device IOMMU generic operations + */ +static irqreturn_t iommu_fault_handler(int irq, void *data) +{ + u32 stat, da; + u32 *iopgd, *iopte; + int err = -EIO; + struct iommu *obj = data; + + if (!obj->refcount) + return IRQ_NONE; + + /* Dynamic loading TLB or PTE */ + if (obj->isr) + err = obj->isr(obj); + + if (!err) + return IRQ_HANDLED; + + clk_enable(obj->clk); + stat = iommu_report_fault(obj, &da); + clk_disable(obj->clk); + if (!stat) + return IRQ_HANDLED; + + iopgd = iopgd_offset(obj, da); + + if (!(*iopgd & IOPGD_TABLE)) { + dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__, + da, iopgd, *iopgd); + return IRQ_NONE; + } + + iopte = iopte_offset(iopgd, da); + + dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", + __func__, da, iopgd, *iopgd, iopte, *iopte); + + return IRQ_NONE; +} + +static int device_match_by_alias(struct device *dev, void *data) +{ + struct iommu *obj = to_iommu(dev); + const char *name = data; + + pr_debug("%s: %s %s\n", __func__, obj->name, name); + + return strcmp(obj->name, name) == 0; +} + +/** + * iommu_get - Get iommu handler + * @name: target iommu name + **/ +struct iommu *iommu_get(const char *name) +{ + int err = -ENOMEM; + struct device *dev; + struct iommu *obj; + + dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name, + device_match_by_alias); + if (!dev) + return ERR_PTR(-ENODEV); + + obj = to_iommu(dev); + + mutex_lock(&obj->iommu_lock); + + if (obj->refcount++ == 0) { + err = iommu_enable(obj); + if (err) + goto err_enable; + flush_iotlb_all(obj); + } + + if (!try_module_get(obj->owner)) + goto err_module; + + mutex_unlock(&obj->iommu_lock); + + dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name); + return obj; + +err_module: + if (obj->refcount == 1) + iommu_disable(obj); +err_enable: + obj->refcount--; + mutex_unlock(&obj->iommu_lock); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(iommu_get); + +/** + * iommu_put - Put back iommu handler + * @obj: target iommu + **/ +void iommu_put(struct iommu *obj) +{ + if (!obj && IS_ERR(obj)) + return; + + mutex_lock(&obj->iommu_lock); + + if (--obj->refcount == 0) + iommu_disable(obj); + + module_put(obj->owner); + + mutex_unlock(&obj->iommu_lock); + + dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name); +} +EXPORT_SYMBOL_GPL(iommu_put); + +/* + * OMAP Device MMU(IOMMU) detection + */ +static int __devinit omap_iommu_probe(struct platform_device *pdev) +{ + int err = -ENODEV; + void *p; + int irq; + struct iommu *obj; + struct resource *res; + struct iommu_platform_data *pdata = pdev->dev.platform_data; + + if (pdev->num_resources != 2) + return -EINVAL; + + obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL); + if (!obj) + return -ENOMEM; + + obj->clk = clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(obj->clk)) + goto err_clk; + + obj->nr_tlb_entries = pdata->nr_tlb_entries; + obj->name = pdata->name; + obj->dev = &pdev->dev; + obj->ctx = (void *)obj + sizeof(*obj); + + mutex_init(&obj->iommu_lock); + mutex_init(&obj->mmap_lock); + spin_lock_init(&obj->page_table_lock); + INIT_LIST_HEAD(&obj->mmap); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENODEV; + goto err_mem; + } + obj->regbase = ioremap(res->start, resource_size(res)); + if (!obj->regbase) { + err = -ENOMEM; + goto err_mem; + } + + res = request_mem_region(res->start, resource_size(res), + dev_name(&pdev->dev)); + if (!res) { + err = -EIO; + goto err_mem; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + err = -ENODEV; + goto err_irq; + } + err = request_irq(irq, iommu_fault_handler, IRQF_SHARED, + dev_name(&pdev->dev), obj); + if (err < 0) + goto err_irq; + platform_set_drvdata(pdev, obj); + + p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE)); + if (!p) { + err = -ENOMEM; + goto err_pgd; + } + memset(p, 0, IOPGD_TABLE_SIZE); + clean_dcache_area(p, IOPGD_TABLE_SIZE); + obj->iopgd = p; + + BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE)); + + dev_info(&pdev->dev, "%s registered\n", obj->name); + return 0; + +err_pgd: + free_irq(irq, obj); +err_irq: + release_mem_region(res->start, resource_size(res)); + iounmap(obj->regbase); +err_mem: + clk_put(obj->clk); +err_clk: + kfree(obj); + return err; +} + +static int __devexit omap_iommu_remove(struct platform_device *pdev) +{ + int irq; + struct resource *res; + struct iommu *obj = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + iopgtable_clear_entry_all(obj); + free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE)); + + irq = platform_get_irq(pdev, 0); + free_irq(irq, obj); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + iounmap(obj->regbase); + + clk_put(obj->clk); + dev_info(&pdev->dev, "%s removed\n", obj->name); + kfree(obj); + return 0; +} + +static struct platform_driver omap_iommu_driver = { + .probe = omap_iommu_probe, + .remove = __devexit_p(omap_iommu_remove), + .driver = { + .name = "omap-iommu", + }, +}; + +static void iopte_cachep_ctor(void *iopte) +{ + clean_dcache_area(iopte, IOPTE_TABLE_SIZE); +} + +static int __init omap_iommu_init(void) +{ + struct kmem_cache *p; + const unsigned long flags = SLAB_HWCACHE_ALIGN; + size_t align = 1 << 10; /* L2 pagetable alignement */ + + p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags, + iopte_cachep_ctor); + if (!p) + return -ENOMEM; + iopte_cachep = p; + + return platform_driver_register(&omap_iommu_driver); +} +module_init(omap_iommu_init); + +static void __exit omap_iommu_exit(void) +{ + kmem_cache_destroy(iopte_cachep); + + platform_driver_unregister(&omap_iommu_driver); +} +module_exit(omap_iommu_exit); + +MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives"); +MODULE_ALIAS("platform:omap-iommu"); +MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h new file mode 100644 index 000000000000..37dac434c7a1 --- /dev/null +++ b/arch/arm/plat-omap/iopgtable.h @@ -0,0 +1,72 @@ +/* + * omap iommu: pagetable definitions + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_OMAP_IOMMU_H +#define __PLAT_OMAP_IOMMU_H + +#define IOPGD_SHIFT 20 +#define IOPGD_SIZE (1 << IOPGD_SHIFT) +#define IOPGD_MASK (~(IOPGD_SIZE - 1)) +#define IOSECTION_MASK IOPGD_MASK +#define PTRS_PER_IOPGD (1 << (32 - IOPGD_SHIFT)) +#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32)) + +#define IOSUPER_SIZE (IOPGD_SIZE << 4) +#define IOSUPER_MASK (~(IOSUPER_SIZE - 1)) + +#define IOPTE_SHIFT 12 +#define IOPTE_SIZE (1 << IOPTE_SHIFT) +#define IOPTE_MASK (~(IOPTE_SIZE - 1)) +#define IOPAGE_MASK IOPTE_MASK +#define PTRS_PER_IOPTE (1 << (IOPGD_SHIFT - IOPTE_SHIFT)) +#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32)) + +#define IOLARGE_SIZE (IOPTE_SIZE << 4) +#define IOLARGE_MASK (~(IOLARGE_SIZE - 1)) + +#define IOPGD_TABLE (1 << 0) +#define IOPGD_SECTION (2 << 0) +#define IOPGD_SUPER (1 << 18 | 2 << 0) + +#define IOPTE_SMALL (2 << 0) +#define IOPTE_LARGE (1 << 0) + +#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) +#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) + +#define iopte_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) +#define iopte_vaddr(iopgd) ((u32 *)phys_to_virt(iopte_paddr(iopgd))) + +#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1)) +#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da)) + +static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, + u32 flags) +{ + memset(e, 0, sizeof(*e)); + + e->da = da; + e->pa = pa; + e->valid = 1; + /* FIXME: add OMAP1 support */ + e->pgsz = flags & MMU_CAM_PGSZ_MASK; + e->endian = flags & MMU_RAM_ENDIAN_MASK; + e->elsz = flags & MMU_RAM_ELSZ_MASK; + e->mixed = flags & MMU_RAM_MIXED_MASK; + + return iopgsz_to_bytes(e->pgsz); +} + +#define to_iommu(dev) \ + (struct iommu *)platform_get_drvdata(to_platform_device(dev)) + +#endif /* __PLAT_OMAP_IOMMU_H */ diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c new file mode 100644 index 000000000000..2fce2c151a95 --- /dev/null +++ b/arch/arm/plat-omap/iovmm.c @@ -0,0 +1,896 @@ +/* + * omap iommu: simple virtual address space management + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/vmalloc.h> +#include <linux/device.h> +#include <linux/scatterlist.h> + +#include <asm/cacheflush.h> +#include <asm/mach/map.h> + +#include <mach/iommu.h> +#include <mach/iovmm.h> + +#include "iopgtable.h" + +/* + * A device driver needs to create address mappings between: + * + * - iommu/device address + * - physical address + * - mpu virtual address + * + * There are 4 possible patterns for them: + * + * |iova/ mapping iommu_ page + * | da pa va (d)-(p)-(v) function type + * --------------------------------------------------------------------------- + * 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s + * 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s + * 3 | c d c 1 - n - 1 _vmap() / _vunmap() s + * 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n* + * + * + * 'iova': device iommu virtual address + * 'da': alias of 'iova' + * 'pa': physical address + * 'va': mpu virtual address + * + * 'c': contiguous memory area + * 'd': dicontiguous memory area + * 'a': anonymous memory allocation + * '()': optional feature + * + * 'n': a normal page(4KB) size is used. + * 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used. + * + * '*': not yet, but feasible. + */ + +static struct kmem_cache *iovm_area_cachep; + +/* return total bytes of sg buffers */ +static size_t sgtable_len(const struct sg_table *sgt) +{ + unsigned int i, total = 0; + struct scatterlist *sg; + + if (!sgt) + return 0; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes; + + bytes = sg_dma_len(sg); + + if (!iopgsz_ok(bytes)) { + pr_err("%s: sg[%d] not iommu pagesize(%x)\n", + __func__, i, bytes); + return 0; + } + + total += bytes; + } + + return total; +} +#define sgtable_ok(x) (!!sgtable_len(x)) + +/* + * calculate the optimal number sg elements from total bytes based on + * iommu superpages + */ +static unsigned int sgtable_nents(size_t bytes) +{ + int i; + unsigned int nr_entries; + const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, }; + + if (!IS_ALIGNED(bytes, PAGE_SIZE)) { + pr_err("%s: wrong size %08x\n", __func__, bytes); + return 0; + } + + nr_entries = 0; + for (i = 0; i < ARRAY_SIZE(pagesize); i++) { + if (bytes >= pagesize[i]) { + nr_entries += (bytes / pagesize[i]); + bytes %= pagesize[i]; + } + } + BUG_ON(bytes); + + return nr_entries; +} + +/* allocate and initialize sg_table header(a kind of 'superblock') */ +static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags) +{ + unsigned int nr_entries; + int err; + struct sg_table *sgt; + + if (!bytes) + return ERR_PTR(-EINVAL); + + if (!IS_ALIGNED(bytes, PAGE_SIZE)) + return ERR_PTR(-EINVAL); + + /* FIXME: IOVMF_DA_FIXED should support 'superpages' */ + if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) { + nr_entries = sgtable_nents(bytes); + if (!nr_entries) + return ERR_PTR(-EINVAL); + } else + nr_entries = bytes / PAGE_SIZE; + + sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); + if (!sgt) + return ERR_PTR(-ENOMEM); + + err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL); + if (err) + return ERR_PTR(err); + + pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries); + + return sgt; +} + +/* free sg_table header(a kind of superblock) */ +static void sgtable_free(struct sg_table *sgt) +{ + if (!sgt) + return; + + sg_free_table(sgt); + kfree(sgt); + + pr_debug("%s: sgt:%p\n", __func__, sgt); +} + +/* map 'sglist' to a contiguous mpu virtual area and return 'va' */ +static void *vmap_sg(const struct sg_table *sgt) +{ + u32 va; + size_t total; + unsigned int i; + struct scatterlist *sg; + struct vm_struct *new; + const struct mem_type *mtype; + + mtype = get_mem_type(MT_DEVICE); + if (!mtype) + return ERR_PTR(-EINVAL); + + total = sgtable_len(sgt); + if (!total) + return ERR_PTR(-EINVAL); + + new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END); + if (!new) + return ERR_PTR(-ENOMEM); + va = (u32)new->addr; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes; + u32 pa; + int err; + + pa = sg_phys(sg); + bytes = sg_dma_len(sg); + + BUG_ON(bytes != PAGE_SIZE); + + err = ioremap_page(va, pa, mtype); + if (err) + goto err_out; + + va += bytes; + } + + flush_cache_vmap(new->addr, total); + return new->addr; + +err_out: + WARN_ON(1); /* FIXME: cleanup some mpu mappings */ + vunmap(new->addr); + return ERR_PTR(-EAGAIN); +} + +static inline void vunmap_sg(const void *va) +{ + vunmap(va); +} + +static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da) +{ + struct iovm_struct *tmp; + + list_for_each_entry(tmp, &obj->mmap, list) { + if ((da >= tmp->da_start) && (da < tmp->da_end)) { + size_t len; + + len = tmp->da_end - tmp->da_start; + + dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", + __func__, tmp->da_start, da, tmp->da_end, len, + tmp->flags); + + return tmp; + } + } + + return NULL; +} + +/** + * find_iovm_area - find iovma which includes @da + * @da: iommu device virtual address + * + * Find the existing iovma starting at @da + */ +struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da) +{ + struct iovm_struct *area; + + mutex_lock(&obj->mmap_lock); + area = __find_iovm_area(obj, da); + mutex_unlock(&obj->mmap_lock); + + return area; +} +EXPORT_SYMBOL_GPL(find_iovm_area); + +/* + * This finds the hole(area) which fits the requested address and len + * in iovmas mmap, and returns the new allocated iovma. + */ +static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da, + size_t bytes, u32 flags) +{ + struct iovm_struct *new, *tmp; + u32 start, prev_end, alignement; + + if (!obj || !bytes) + return ERR_PTR(-EINVAL); + + start = da; + alignement = PAGE_SIZE; + + if (flags & IOVMF_DA_ANON) { + /* + * Reserve the first page for NULL + */ + start = PAGE_SIZE; + if (flags & IOVMF_LINEAR) + alignement = iopgsz_max(bytes); + start = roundup(start, alignement); + } + + tmp = NULL; + if (list_empty(&obj->mmap)) + goto found; + + prev_end = 0; + list_for_each_entry(tmp, &obj->mmap, list) { + + if ((prev_end <= start) && (start + bytes < tmp->da_start)) + goto found; + + if (flags & IOVMF_DA_ANON) + start = roundup(tmp->da_end, alignement); + + prev_end = tmp->da_end; + } + + if ((start >= prev_end) && (ULONG_MAX - start >= bytes)) + goto found; + + dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n", + __func__, da, bytes, flags); + + return ERR_PTR(-EINVAL); + +found: + new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL); + if (!new) + return ERR_PTR(-ENOMEM); + + new->iommu = obj; + new->da_start = start; + new->da_end = start + bytes; + new->flags = flags; + + /* + * keep ascending order of iovmas + */ + if (tmp) + list_add_tail(&new->list, &tmp->list); + else + list_add(&new->list, &obj->mmap); + + dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n", + __func__, new->da_start, start, new->da_end, bytes, flags); + + return new; +} + +static void free_iovm_area(struct iommu *obj, struct iovm_struct *area) +{ + size_t bytes; + + BUG_ON(!obj || !area); + + bytes = area->da_end - area->da_start; + + dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n", + __func__, area->da_start, area->da_end, bytes, area->flags); + + list_del(&area->list); + kmem_cache_free(iovm_area_cachep, area); +} + +/** + * da_to_va - convert (d) to (v) + * @obj: objective iommu + * @da: iommu device virtual address + * @va: mpu virtual address + * + * Returns mpu virtual addr which corresponds to a given device virtual addr + */ +void *da_to_va(struct iommu *obj, u32 da) +{ + void *va = NULL; + struct iovm_struct *area; + + mutex_lock(&obj->mmap_lock); + + area = __find_iovm_area(obj, da); + if (!area) { + dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da); + goto out; + } + va = area->va; + mutex_unlock(&obj->mmap_lock); +out: + return va; +} +EXPORT_SYMBOL_GPL(da_to_va); + +static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va) +{ + unsigned int i; + struct scatterlist *sg; + void *va = _va; + void *va_end; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + struct page *pg; + const size_t bytes = PAGE_SIZE; + + /* + * iommu 'superpage' isn't supported with 'iommu_vmalloc()' + */ + pg = vmalloc_to_page(va); + BUG_ON(!pg); + sg_set_page(sg, pg, bytes, 0); + + va += bytes; + } + + va_end = _va + PAGE_SIZE * i; + flush_cache_vmap(_va, va_end); +} + +static inline void sgtable_drain_vmalloc(struct sg_table *sgt) +{ + /* + * Actually this is not necessary at all, just exists for + * consistency of the code readibility. + */ + BUG_ON(!sgt); +} + +static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len) +{ + unsigned int i; + struct scatterlist *sg; + void *va; + + va = phys_to_virt(pa); + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes; + + bytes = iopgsz_max(len); + + BUG_ON(!iopgsz_ok(bytes)); + + sg_set_buf(sg, phys_to_virt(pa), bytes); + /* + * 'pa' is cotinuous(linear). + */ + pa += bytes; + len -= bytes; + } + BUG_ON(len); + + clean_dcache_area(va, len); +} + +static inline void sgtable_drain_kmalloc(struct sg_table *sgt) +{ + /* + * Actually this is not necessary at all, just exists for + * consistency of the code readibility + */ + BUG_ON(!sgt); +} + +/* create 'da' <-> 'pa' mapping from 'sgt' */ +static int map_iovm_area(struct iommu *obj, struct iovm_struct *new, + const struct sg_table *sgt, u32 flags) +{ + int err; + unsigned int i, j; + struct scatterlist *sg; + u32 da = new->da_start; + + if (!obj || !new || !sgt) + return -EINVAL; + + BUG_ON(!sgtable_ok(sgt)); + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + u32 pa; + int pgsz; + size_t bytes; + struct iotlb_entry e; + + pa = sg_phys(sg); + bytes = sg_dma_len(sg); + + flags &= ~IOVMF_PGSZ_MASK; + pgsz = bytes_to_iopgsz(bytes); + if (pgsz < 0) + goto err_out; + flags |= pgsz; + + pr_debug("%s: [%d] %08x %08x(%x)\n", __func__, + i, da, pa, bytes); + + iotlb_init_entry(&e, da, pa, flags); + err = iopgtable_store_entry(obj, &e); + if (err) + goto err_out; + + da += bytes; + } + return 0; + +err_out: + da = new->da_start; + + for_each_sg(sgt->sgl, sg, i, j) { + size_t bytes; + + bytes = iopgtable_clear_entry(obj, da); + + BUG_ON(!iopgsz_ok(bytes)); + + da += bytes; + } + return err; +} + +/* release 'da' <-> 'pa' mapping */ +static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area) +{ + u32 start; + size_t total = area->da_end - area->da_start; + + BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE)); + + start = area->da_start; + while (total > 0) { + size_t bytes; + + bytes = iopgtable_clear_entry(obj, start); + if (bytes == 0) + bytes = PAGE_SIZE; + else + dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n", + __func__, start, bytes, area->flags); + + BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE)); + + total -= bytes; + start += bytes; + } + BUG_ON(total); +} + +/* template function for all unmapping */ +static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da, + void (*fn)(const void *), u32 flags) +{ + struct sg_table *sgt = NULL; + struct iovm_struct *area; + + if (!IS_ALIGNED(da, PAGE_SIZE)) { + dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da); + return NULL; + } + + mutex_lock(&obj->mmap_lock); + + area = __find_iovm_area(obj, da); + if (!area) { + dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da); + goto out; + } + + if ((area->flags & flags) != flags) { + dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__, + area->flags); + goto out; + } + sgt = (struct sg_table *)area->sgt; + + unmap_iovm_area(obj, area); + + fn(area->va); + + dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__, + area->da_start, da, area->da_end, + area->da_end - area->da_start, area->flags); + + free_iovm_area(obj, area); +out: + mutex_unlock(&obj->mmap_lock); + + return sgt; +} + +static u32 map_iommu_region(struct iommu *obj, u32 da, + const struct sg_table *sgt, void *va, size_t bytes, u32 flags) +{ + int err = -ENOMEM; + struct iovm_struct *new; + + mutex_lock(&obj->mmap_lock); + + new = alloc_iovm_area(obj, da, bytes, flags); + if (IS_ERR(new)) { + err = PTR_ERR(new); + goto err_alloc_iovma; + } + new->va = va; + new->sgt = sgt; + + if (map_iovm_area(obj, new, sgt, new->flags)) + goto err_map; + + mutex_unlock(&obj->mmap_lock); + + dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n", + __func__, new->da_start, bytes, new->flags, va); + + return new->da_start; + +err_map: + free_iovm_area(obj, new); +err_alloc_iovma: + mutex_unlock(&obj->mmap_lock); + return err; +} + +static inline u32 __iommu_vmap(struct iommu *obj, u32 da, + const struct sg_table *sgt, void *va, size_t bytes, u32 flags) +{ + return map_iommu_region(obj, da, sgt, va, bytes, flags); +} + +/** + * iommu_vmap - (d)-(p)-(v) address mapper + * @obj: objective iommu + * @sgt: address of scatter gather table + * @flags: iovma and page property + * + * Creates 1-n-1 mapping with given @sgt and returns @da. + * All @sgt element must be io page size aligned. + */ +u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt, + u32 flags) +{ + size_t bytes; + void *va; + + if (!obj || !obj->dev || !sgt) + return -EINVAL; + + bytes = sgtable_len(sgt); + if (!bytes) + return -EINVAL; + bytes = PAGE_ALIGN(bytes); + + va = vmap_sg(sgt); + if (IS_ERR(va)) + return PTR_ERR(va); + + flags &= IOVMF_HW_MASK; + flags |= IOVMF_DISCONT; + flags |= IOVMF_MMIO; + flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); + + da = __iommu_vmap(obj, da, sgt, va, bytes, flags); + if (IS_ERR_VALUE(da)) + vunmap_sg(va); + + return da; +} +EXPORT_SYMBOL_GPL(iommu_vmap); + +/** + * iommu_vunmap - release virtual mapping obtained by 'iommu_vmap()' + * @obj: objective iommu + * @da: iommu device virtual address + * + * Free the iommu virtually contiguous memory area starting at + * @da, which was returned by 'iommu_vmap()'. + */ +struct sg_table *iommu_vunmap(struct iommu *obj, u32 da) +{ + struct sg_table *sgt; + /* + * 'sgt' is allocated before 'iommu_vmalloc()' is called. + * Just returns 'sgt' to the caller to free + */ + sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO); + if (!sgt) + dev_dbg(obj->dev, "%s: No sgt\n", __func__); + return sgt; +} +EXPORT_SYMBOL_GPL(iommu_vunmap); + +/** + * iommu_vmalloc - (d)-(p)-(v) address allocator and mapper + * @obj: objective iommu + * @da: contiguous iommu virtual memory + * @bytes: allocation size + * @flags: iovma and page property + * + * Allocate @bytes linearly and creates 1-n-1 mapping and returns + * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set. + */ +u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) +{ + void *va; + struct sg_table *sgt; + + if (!obj || !obj->dev || !bytes) + return -EINVAL; + + bytes = PAGE_ALIGN(bytes); + + va = vmalloc(bytes); + if (!va) + return -ENOMEM; + + sgt = sgtable_alloc(bytes, flags); + if (IS_ERR(sgt)) { + da = PTR_ERR(sgt); + goto err_sgt_alloc; + } + sgtable_fill_vmalloc(sgt, va); + + flags &= IOVMF_HW_MASK; + flags |= IOVMF_DISCONT; + flags |= IOVMF_ALLOC; + flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); + + da = __iommu_vmap(obj, da, sgt, va, bytes, flags); + if (IS_ERR_VALUE(da)) + goto err_iommu_vmap; + + return da; + +err_iommu_vmap: + sgtable_drain_vmalloc(sgt); + sgtable_free(sgt); +err_sgt_alloc: + vfree(va); + return da; +} +EXPORT_SYMBOL_GPL(iommu_vmalloc); + +/** + * iommu_vfree - release memory allocated by 'iommu_vmalloc()' + * @obj: objective iommu + * @da: iommu device virtual address + * + * Frees the iommu virtually continuous memory area starting at + * @da, as obtained from 'iommu_vmalloc()'. + */ +void iommu_vfree(struct iommu *obj, const u32 da) +{ + struct sg_table *sgt; + + sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC); + if (!sgt) + dev_dbg(obj->dev, "%s: No sgt\n", __func__); + sgtable_free(sgt); +} +EXPORT_SYMBOL_GPL(iommu_vfree); + +static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va, + size_t bytes, u32 flags) +{ + struct sg_table *sgt; + + sgt = sgtable_alloc(bytes, flags); + if (IS_ERR(sgt)) + return PTR_ERR(sgt); + + sgtable_fill_kmalloc(sgt, pa, bytes); + + da = map_iommu_region(obj, da, sgt, va, bytes, flags); + if (IS_ERR_VALUE(da)) { + sgtable_drain_kmalloc(sgt); + sgtable_free(sgt); + } + + return da; +} + +/** + * iommu_kmap - (d)-(p)-(v) address mapper + * @obj: objective iommu + * @da: contiguous iommu virtual memory + * @pa: contiguous physical memory + * @flags: iovma and page property + * + * Creates 1-1-1 mapping and returns @da again, which can be + * adjusted if 'IOVMF_DA_ANON' is set. + */ +u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, + u32 flags) +{ + void *va; + + if (!obj || !obj->dev || !bytes) + return -EINVAL; + + bytes = PAGE_ALIGN(bytes); + + va = ioremap(pa, bytes); + if (!va) + return -ENOMEM; + + flags &= IOVMF_HW_MASK; + flags |= IOVMF_LINEAR; + flags |= IOVMF_MMIO; + flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); + + da = __iommu_kmap(obj, da, pa, va, bytes, flags); + if (IS_ERR_VALUE(da)) + iounmap(va); + + return da; +} +EXPORT_SYMBOL_GPL(iommu_kmap); + +/** + * iommu_kunmap - release virtual mapping obtained by 'iommu_kmap()' + * @obj: objective iommu + * @da: iommu device virtual address + * + * Frees the iommu virtually contiguous memory area starting at + * @da, which was passed to and was returned by'iommu_kmap()'. + */ +void iommu_kunmap(struct iommu *obj, u32 da) +{ + struct sg_table *sgt; + typedef void (*func_t)(const void *); + + sgt = unmap_vm_area(obj, da, (func_t)__iounmap, + IOVMF_LINEAR | IOVMF_MMIO); + if (!sgt) + dev_dbg(obj->dev, "%s: No sgt\n", __func__); + sgtable_free(sgt); +} +EXPORT_SYMBOL_GPL(iommu_kunmap); + +/** + * iommu_kmalloc - (d)-(p)-(v) address allocator and mapper + * @obj: objective iommu + * @da: contiguous iommu virtual memory + * @bytes: bytes for allocation + * @flags: iovma and page property + * + * Allocate @bytes linearly and creates 1-1-1 mapping and returns + * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set. + */ +u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) +{ + void *va; + u32 pa; + + if (!obj || !obj->dev || !bytes) + return -EINVAL; + + bytes = PAGE_ALIGN(bytes); + + va = kmalloc(bytes, GFP_KERNEL | GFP_DMA); + if (!va) + return -ENOMEM; + pa = virt_to_phys(va); + + flags &= IOVMF_HW_MASK; + flags |= IOVMF_LINEAR; + flags |= IOVMF_ALLOC; + flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); + + da = __iommu_kmap(obj, da, pa, va, bytes, flags); + if (IS_ERR_VALUE(da)) + kfree(va); + + return da; +} +EXPORT_SYMBOL_GPL(iommu_kmalloc); + +/** + * iommu_kfree - release virtual mapping obtained by 'iommu_kmalloc()' + * @obj: objective iommu + * @da: iommu device virtual address + * + * Frees the iommu virtually contiguous memory area starting at + * @da, which was passed to and was returned by'iommu_kmalloc()'. + */ +void iommu_kfree(struct iommu *obj, u32 da) +{ + struct sg_table *sgt; + + sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC); + if (!sgt) + dev_dbg(obj->dev, "%s: No sgt\n", __func__); + sgtable_free(sgt); +} +EXPORT_SYMBOL_GPL(iommu_kfree); + + +static int __init iovmm_init(void) +{ + const unsigned long flags = SLAB_HWCACHE_ALIGN; + struct kmem_cache *p; + + p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0, + flags, NULL); + if (!p) + return -ENOMEM; + iovm_area_cachep = p; + + return 0; +} +module_init(iovmm_init); + +static void __exit iovmm_exit(void) +{ + kmem_cache_destroy(iovm_area_cachep); +} +module_exit(iovmm_exit); + +MODULE_DESCRIPTION("omap iommu: simple virtual address space management"); +MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 28b0a824b8cf..efa0e0111f38 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id) static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) { struct omap_mcbsp *mcbsp_tx = dev_id; + u16 irqst_spcr2; - dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", - OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); + irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2); + dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2); - complete(&mcbsp_tx->tx_irq_completion); + if (irqst_spcr2 & XSYNC_ERR) { + dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n", + irqst_spcr2); + /* Writing zero to XSYNC_ERR clears the IRQ */ + OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2, + irqst_spcr2 & ~(XSYNC_ERR)); + } else { + complete(&mcbsp_tx->tx_irq_completion); + } return IRQ_HANDLED; } @@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) { struct omap_mcbsp *mcbsp_rx = dev_id; + u16 irqst_spcr1; - dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", - OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); + irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1); + dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1); - complete(&mcbsp_rx->rx_irq_completion); + if (irqst_spcr1 & RSYNC_ERR) { + dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n", + irqst_spcr1); + /* Writing zero to RSYNC_ERR clears the IRQ */ + OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1, + irqst_spcr1 & ~(RSYNC_ERR)); + } else { + complete(&mcbsp_rx->tx_irq_completion); + } return IRQ_HANDLED; } diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 80b040fd5ca7..8d329fb20740 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index) { struct pin_config *reg; + if (cpu_is_omap44xx()) + return 0; + if (mux_cfg == NULL) { printk(KERN_ERR "Pin mux table not initialized\n"); return -ENODEV; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index fa5297d643d3..a5b9bcd6b108 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -6,6 +6,9 @@ * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -38,12 +41,14 @@ #define OMAP1_SRAM_VA VMALLOC_END #define OMAP2_SRAM_PA 0x40200000 #define OMAP2_SRAM_PUB_PA 0x4020f800 -#define OMAP2_SRAM_VA VMALLOC_END -#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800) +#define OMAP2_SRAM_VA 0xe3000000 +#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 #define OMAP3_SRAM_VA 0xd7000000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA 0xd7008000 +#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ +#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -87,6 +92,10 @@ static int is_sram_locked(void) { int type = 0; + if (cpu_is_omap44xx()) + /* Not yet supported */ + return 0; + if (cpu_is_omap242x()) type = omap_rev() & OMAP2_DEVICETYPE_MASK; @@ -135,6 +144,10 @@ void __init omap_detect_sram(void) omap_sram_base = OMAP3_SRAM_VA; omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap44xx()) { + omap_sram_base = OMAP4_SRAM_VA; + omap_sram_start = OMAP4_SRAM_PA; + omap_sram_size = 0x8000; /* 32K */ } else { omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; @@ -201,8 +214,23 @@ void __init omap_map_sram(void) base = OMAP3_SRAM_PA; base = ROUND_DOWN(base, PAGE_SIZE); omap_sram_io_desc[0].pfn = __phys_to_pfn(base); + + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED; } + if (cpu_is_omap44xx()) { + omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA; + base = OMAP4_SRAM_PA; + base = ROUND_DOWN(base, PAGE_SIZE); + omap_sram_io_desc[0].pfn = __phys_to_pfn(base); + } omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */ iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); @@ -242,20 +270,13 @@ void * omap_sram_push(void * start, unsigned long size) return (void *)omap_sram_ceil; } -static void omap_sram_error(void) -{ - panic("Uninitialized SRAM function\n"); -} - #ifdef CONFIG_ARCH_OMAP1 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) { - if (!_omap_sram_reprogram_clock) - omap_sram_error(); - + BUG_ON(!_omap_sram_reprogram_clock); _omap_sram_reprogram_clock(dpllctl, ckctl); } @@ -280,9 +301,7 @@ static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock) { - if (!_omap2_sram_ddr_init) - omap_sram_error(); - + BUG_ON(!_omap2_sram_ddr_init); _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, base_cs, force_unlock); } @@ -292,9 +311,7 @@ static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) { - if (!_omap2_sram_reprogram_sdrc) - omap_sram_error(); - + BUG_ON(!_omap2_sram_reprogram_sdrc); _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); } @@ -302,9 +319,7 @@ static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) { - if (!_omap2_set_prcm) - omap_sram_error(); - + BUG_ON(!_omap2_set_prcm); return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); } #endif @@ -356,16 +371,15 @@ static inline int omap243x_sram_init(void) static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, - u32 m2); + u32 m2, u32 unlock_dll); u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2) + u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll) { - if (!_omap3_sram_configure_core_dpll) - omap_sram_error(); - + BUG_ON(!_omap3_sram_configure_core_dpll); return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, sdrc_actim_ctrla, - sdrc_actim_ctrlb, m2); + sdrc_actim_ctrlb, m2, + unlock_dll); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ @@ -406,6 +420,8 @@ int __init omap_sram_init(void) omap243x_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); + else if (cpu_is_omap44xx()) + omap34xx_sram_init(); /* FIXME: */ return 0; } diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 32eb9e33bebb..e814803d4741 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -15,10 +15,9 @@ #include <linux/spinlock.h> #include <linux/bitops.h> #include <linux/io.h> -#include <asm/gpio.h> +#include <linux/gpio.h> static DEFINE_SPINLOCK(gpio_lock); -static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)]; static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)]; @@ -46,82 +45,54 @@ static void __set_level(unsigned pin, int high) writel(u, GPIO_OUT(pin)); } - -/* - * GENERIC_GPIO primitives. - */ -int gpio_direction_input(unsigned pin) +static inline void __set_blinking(unsigned pin, int blink) { - unsigned long flags; - - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } - - spin_lock_irqsave(&gpio_lock, flags); - - /* - * Some callers might not have used gpio_request(), - * so flag this pin as requested now. - */ - if (gpio_label[pin] == NULL) - gpio_label[pin] = "?"; + u32 u; - /* - * Configure GPIO direction. - */ - __set_direction(pin, 1); + u = readl(GPIO_BLINK_EN(pin)); + if (blink) + u |= 1 << (pin & 31); + else + u &= ~(1 << (pin & 31)); + writel(u, GPIO_BLINK_EN(pin)); +} - spin_unlock_irqrestore(&gpio_lock, flags); +static inline int orion_gpio_is_valid(unsigned pin, int mode) +{ + if (pin < GPIO_MAX) { + if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input)) + goto err_out; + if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output)) + goto err_out; + return true; + } - return 0; +err_out: + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return false; } -EXPORT_SYMBOL(gpio_direction_input); -int gpio_direction_output(unsigned pin, int value) +/* + * GENERIC_GPIO primitives. + */ +static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin) { unsigned long flags; - u32 u; - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); + if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK)) return -EINVAL; - } spin_lock_irqsave(&gpio_lock, flags); - /* - * Some callers might not have used gpio_request(), - * so flag this pin as requested now. - */ - if (gpio_label[pin] == NULL) - gpio_label[pin] = "?"; - - /* - * Disable blinking. - */ - u = readl(GPIO_BLINK_EN(pin)); - u &= ~(1 << (pin & 31)); - writel(u, GPIO_BLINK_EN(pin)); - - /* - * Configure GPIO output value. - */ - __set_level(pin, value); - - /* - * Configure GPIO direction. - */ - __set_direction(pin, 0); + /* Configure GPIO direction. */ + __set_direction(pin, 1); spin_unlock_irqrestore(&gpio_lock, flags); return 0; } -EXPORT_SYMBOL(gpio_direction_output); -int gpio_get_value(unsigned pin) +static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin) { int val; @@ -132,83 +103,75 @@ int gpio_get_value(unsigned pin) return (val >> (pin & 31)) & 1; } -EXPORT_SYMBOL(gpio_get_value); -void gpio_set_value(unsigned pin, int value) +static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, + int value) { unsigned long flags; - u32 u; + + if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK)) + return -EINVAL; spin_lock_irqsave(&gpio_lock, flags); - /* - * Disable blinking. - */ - u = readl(GPIO_BLINK_EN(pin)); - u &= ~(1 << (pin & 31)); - writel(u, GPIO_BLINK_EN(pin)); + /* Disable blinking. */ + __set_blinking(pin, 0); - /* - * Configure GPIO output value. - */ + /* Configure GPIO output value. */ __set_level(pin, value); + /* Configure GPIO direction. */ + __set_direction(pin, 0); + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; } -EXPORT_SYMBOL(gpio_set_value); -int gpio_request(unsigned pin, const char *label) +static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin, + int value) { unsigned long flags; - int ret; - - if (pin >= GPIO_MAX || - !(test_bit(pin, gpio_valid_input) || - test_bit(pin, gpio_valid_output))) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } spin_lock_irqsave(&gpio_lock, flags); - if (gpio_label[pin] == NULL) { - gpio_label[pin] = label ? label : "?"; - ret = 0; - } else { - pr_debug("%s: GPIO %d already used as %s\n", - __func__, pin, gpio_label[pin]); - ret = -EBUSY; - } - spin_unlock_irqrestore(&gpio_lock, flags); - return ret; + /* Configure GPIO output value. */ + __set_level(pin, value); + + spin_unlock_irqrestore(&gpio_lock, flags); } -EXPORT_SYMBOL(gpio_request); -void gpio_free(unsigned pin) +static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) { - if (pin >= GPIO_MAX || - !(test_bit(pin, gpio_valid_input) || - test_bit(pin, gpio_valid_output))) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return; - } - - if (gpio_label[pin] == NULL) - pr_warning("%s: GPIO %d already freed\n", __func__, pin); - else - gpio_label[pin] = NULL; + if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) || + orion_gpio_is_valid(pin, GPIO_OUTPUT_OK)) + return 0; + return -EINVAL; } -EXPORT_SYMBOL(gpio_free); +static struct gpio_chip orion_gpiochip = { + .label = "orion_gpio", + .direction_input = orion_gpio_direction_input, + .get = orion_gpio_get_value, + .direction_output = orion_gpio_direction_output, + .set = orion_gpio_set_value, + .request = orion_gpio_request, + .base = 0, + .ngpio = GPIO_MAX, + .can_sleep = 0, +}; + +void __init orion_gpio_init(void) +{ + gpiochip_add(&orion_gpiochip); +} /* * Orion-specific GPIO API extensions. */ void __init orion_gpio_set_unused(unsigned pin) { - /* - * Configure as output, drive low. - */ + /* Configure as output, drive low. */ __set_level(pin, 0); __set_direction(pin, 0); } @@ -230,21 +193,14 @@ void __init orion_gpio_set_valid(unsigned pin, int mode) void orion_gpio_set_blink(unsigned pin, int blink) { unsigned long flags; - u32 u; spin_lock_irqsave(&gpio_lock, flags); - /* - * Set output value to zero. - */ + /* Set output value to zero. */ __set_level(pin, 0); - u = readl(GPIO_BLINK_EN(pin)); - if (blink) - u |= 1 << (pin & 31); - else - u &= ~(1 << (pin & 31)); - writel(u, GPIO_BLINK_EN(pin)); + /* Set blinking. */ + __set_blinking(pin, blink); spin_unlock_irqrestore(&gpio_lock, flags); } @@ -368,7 +324,7 @@ static int gpio_irq_set_type(u32 irq, u32 type) } struct irq_chip orion_gpio_irq_chip = { - .name = "orion_gpio", + .name = "orion_gpio_irq", .ack = gpio_irq_ack, .mask = gpio_irq_mask, .unmask = gpio_irq_unmask, diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 33f6c6aec185..9646a94ed3d0 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -14,12 +14,9 @@ /* * GENERIC_GPIO primitives. */ -int gpio_request(unsigned pin, const char *label); -void gpio_free(unsigned pin); -int gpio_direction_input(unsigned pin); -int gpio_direction_output(unsigned pin, int value); -int gpio_get_value(unsigned pin); -void gpio_set_value(unsigned pin, int value); +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep /* * Orion-specific GPIO API extensions. @@ -27,11 +24,13 @@ void gpio_set_value(unsigned pin, int value); void orion_gpio_set_unused(unsigned pin); void orion_gpio_set_blink(unsigned pin, int blink); -#define GPIO_BIDI_OK (1 << 0) -#define GPIO_INPUT_OK (1 << 1) -#define GPIO_OUTPUT_OK (1 << 2) +#define GPIO_INPUT_OK (1 << 0) +#define GPIO_OUTPUT_OK (1 << 1) void orion_gpio_set_valid(unsigned pin, int mode); +/* Initialize gpiolib. */ +void __init orion_gpio_init(void); + /* * GPIO interrupt handling. */ diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h index 3c9cf6a305ef..665c362a2fba 100644 --- a/arch/arm/plat-orion/include/plat/orion5x_wdt.h +++ b/arch/arm/plat-orion/include/plat/orion_wdt.h @@ -1,15 +1,15 @@ /* - * arch/arm/plat-orion/include/plat/orion5x_wdt.h + * arch/arm/plat-orion/include/plat/orion_wdt.h * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __PLAT_ORION5X_WDT_H -#define __PLAT_ORION5X_WDT_H +#ifndef __PLAT_ORION_WDT_H +#define __PLAT_ORION_WDT_H -struct orion5x_wdt_platform_data { +struct orion_wdt_platform_data { u32 tclk; /* no <linux/clk.h> support yet */ }; diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index de8a001fc3a9..715a30177f28 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -12,11 +12,15 @@ */ #include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cnt32_to_63.h> +#include <linux/timer.h> #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <asm/mach/time.h> #include <mach/bridge-regs.h> +#include <mach/hardware.h> /* * Number of timer ticks per jiffy. @@ -39,6 +43,56 @@ static u32 ticks_per_jiffy; /* + * Orion's sched_clock implementation. It has a resolution of + * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days. + * + * Because the hardware timer period is quite short (21 secs if + * 200MHz TCLK) and because cnt32_to_63() needs to be called at + * least once per half period to work properly, a kernel timer is + * set up to ensure this requirement is always met. + */ +#define TCLK2NS_SCALE_FACTOR 8 + +static unsigned long tclk2ns_scale; + +unsigned long long sched_clock(void) +{ + unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL)); + return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR; +} + +static struct timer_list cnt32_to_63_keepwarm_timer; + +static void cnt32_to_63_keepwarm(unsigned long data) +{ + mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); + (void) sched_clock(); +} + +static void __init setup_sched_clock(unsigned long tclk) +{ + unsigned long long v; + unsigned long data; + + v = NSEC_PER_SEC; + v <<= TCLK2NS_SCALE_FACTOR; + v += tclk/2; + do_div(v, tclk); + /* + * We want an even value to automatically clear the top bit + * returned by cnt32_to_63() without an additional run time + * instruction. So if the LSB is 1 then round it up. + */ + if (v & 1) + v++; + tclk2ns_scale = v; + + data = (0xffffffffUL / tclk / 2 - 2) * HZ; + setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data); + mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); +} + +/* * Clocksource handling. */ static cycle_t orion_clksrc_read(struct clocksource *cs) @@ -176,6 +230,10 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk) ticks_per_jiffy = (tclk + HZ/2) / HZ; + /* + * Set scale and timer for sched_clock + */ + setup_sched_clock(tclk); /* * Setup free-running clocksource timer (interrupts @@ -190,7 +248,6 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk) orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift); clocksource_register(&orion_clksrc); - /* * Setup clockevent timer (interrupt-driven.) */ diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 8f2c4c7fbd48..0264bfb0ca4f 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -7,3 +7,5 @@ obj-y := dma.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o + +obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/plat-pxa/include/plat/i2c.h index 1a9f65e6ec0f..1a9f65e6ec0f 100644 --- a/arch/arm/mach-pxa/include/mach/i2c.h +++ b/arch/arm/plat-pxa/include/plat/i2c.h diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c index fcdd374437a8..a9eabdcfa163 100644 --- a/arch/arm/mach-pxa/pwm.c +++ b/arch/arm/plat-pxa/pwm.c @@ -21,6 +21,19 @@ #include <asm/div64.h> +#define HAS_SECONDARY_PWM 0x10 +#define PWM_ID_BASE(d) ((d) & 0xf) + +static const struct platform_device_id pwm_id_table[] = { + /* PWM has_secondary_pwm? */ + { "pxa25x-pwm", 0 }, + { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM }, + { "pxa168-pwm", 1 }, + { "pxa910-pwm", 1 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, pwm_id_table); + /* PWM registers and bits definitions */ #define PWMCR (0x00) #define PWMDCR (0x04) @@ -31,7 +44,8 @@ struct pwm_device { struct list_head node; - struct platform_device *pdev; + struct pwm_device *secondary; + struct platform_device *pdev; const char *label; struct clk *clk; @@ -159,17 +173,17 @@ static inline void __add_pwm(struct pwm_device *pwm) mutex_unlock(&pwm_lock); } -static struct pwm_device *pwm_probe(struct platform_device *pdev, - unsigned int pwm_id, struct pwm_device *parent_pwm) +static int __devinit pwm_probe(struct platform_device *pdev) { - struct pwm_device *pwm; + struct platform_device_id *id = platform_get_device_id(pdev); + struct pwm_device *pwm, *secondary = NULL; struct resource *r; int ret = 0; pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); if (pwm == NULL) { dev_err(&pdev->dev, "failed to allocate memory\n"); - return ERR_PTR(-ENOMEM); + return -ENOMEM; } pwm->clk = clk_get(&pdev->dev, NULL); @@ -180,16 +194,9 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev, pwm->clk_enabled = 0; pwm->use_count = 0; - pwm->pwm_id = pwm_id; + pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id; pwm->pdev = pdev; - if (parent_pwm != NULL) { - /* registers for the second PWM has offset of 0x10 */ - pwm->mmio_base = parent_pwm->mmio_base + 0x10; - __add_pwm(pwm); - return pwm; - } - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (r == NULL) { dev_err(&pdev->dev, "no memory resource defined\n"); @@ -211,9 +218,27 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev, goto err_free_mem; } + if (id->driver_data & HAS_SECONDARY_PWM) { + secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); + if (secondary == NULL) { + ret = -ENOMEM; + goto err_free_mem; + } + + *secondary = *pwm; + pwm->secondary = secondary; + + /* registers for the second PWM has offset of 0x10 */ + secondary->mmio_base = pwm->mmio_base + 0x10; + secondary->pwm_id = pdev->id + 2; + } + __add_pwm(pwm); + if (secondary) + __add_pwm(secondary); + platform_set_drvdata(pdev, pwm); - return pwm; + return 0; err_free_mem: release_mem_region(r->start, r->end - r->start + 1); @@ -221,32 +246,7 @@ err_free_clk: clk_put(pwm->clk); err_free: kfree(pwm); - return ERR_PTR(ret); -} - -static int __devinit pxa25x_pwm_probe(struct platform_device *pdev) -{ - struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL); - - if (IS_ERR(pwm)) - return PTR_ERR(pwm); - - return 0; -} - -static int __devinit pxa27x_pwm_probe(struct platform_device *pdev) -{ - struct pwm_device *pwm; - - pwm = pwm_probe(pdev, pdev->id, NULL); - if (IS_ERR(pwm)) - return PTR_ERR(pwm); - - pwm = pwm_probe(pdev, pdev->id + 2, pwm); - if (IS_ERR(pwm)) - return PTR_ERR(pwm); - - return 0; + return ret; } static int __devexit pwm_remove(struct platform_device *pdev) @@ -259,6 +259,12 @@ static int __devexit pwm_remove(struct platform_device *pdev) return -ENODEV; mutex_lock(&pwm_lock); + + if (pwm->secondary) { + list_del(&pwm->secondary->node); + kfree(pwm->secondary); + } + list_del(&pwm->node); mutex_unlock(&pwm_lock); @@ -272,46 +278,25 @@ static int __devexit pwm_remove(struct platform_device *pdev) return 0; } -static struct platform_driver pxa25x_pwm_driver = { +static struct platform_driver pwm_driver = { .driver = { .name = "pxa25x-pwm", + .owner = THIS_MODULE, }, - .probe = pxa25x_pwm_probe, - .remove = __devexit_p(pwm_remove), -}; - -static struct platform_driver pxa27x_pwm_driver = { - .driver = { - .name = "pxa27x-pwm", - }, - .probe = pxa27x_pwm_probe, + .probe = pwm_probe, .remove = __devexit_p(pwm_remove), + .id_table = pwm_id_table, }; static int __init pwm_init(void) { - int ret = 0; - - ret = platform_driver_register(&pxa25x_pwm_driver); - if (ret) { - printk(KERN_ERR "failed to register pxa25x_pwm_driver\n"); - return ret; - } - - ret = platform_driver_register(&pxa27x_pwm_driver); - if (ret) { - printk(KERN_ERR "failed to register pxa27x_pwm_driver\n"); - return ret; - } - - return ret; + return platform_driver_register(&pwm_driver); } arch_initcall(pwm_init); static void __exit pwm_exit(void) { - platform_driver_unregister(&pxa25x_pwm_driver); - platform_driver_unregister(&pxa27x_pwm_driver); + platform_driver_unregister(&pwm_driver); } module_exit(pwm_exit); diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index de9383814e5e..935c7558469b 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> for more information. +config S3C_PM_DEBUG_LED_SMDK + bool "SMDK LED suspend/resume debugging" + depends on PM && (MACH_SMDK6410) + help + Say Y here to enable the use of the SMDK LEDs on the baseboard + for debugging of the state of the suspend and resume process. + + Note, this currently only works for S3C64XX based SMDK boards. + config S3C2410_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" depends on PM && CRC32 @@ -150,6 +159,13 @@ config S3C_GPIO_CFG_S3C64XX Internal configuration to enable S3C64XX style GPIO configuration functions. +# DMA + +config S3C_DMA + bool + help + Internal configuration for S3C DMA core + # device definitions to compile in config S3C_DEV_HSMMC @@ -172,4 +188,14 @@ config S3C_DEV_FB help Compile in platform device definition for framebuffer +config S3C_DEV_USB_HOST + bool + help + Compile in platform device definition for USB host. + +config S3C_DEV_USB_HSOTG + bool + help + Compile in platform device definition for USB high-speed OtG + endif diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 8d7815d25a51..610651455a78 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -18,9 +18,14 @@ obj-y += pwm-clock.o obj-y += gpio.o obj-y += gpio-config.o +# DMA support + +obj-$(CONFIG_S3C_DMA) += dma.o + # PM support obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += pm-gpio.o obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o # devices @@ -30,3 +35,5 @@ obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o +obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o +obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c new file mode 100644 index 000000000000..e2f604b51c86 --- /dev/null +++ b/arch/arm/plat-s3c/dev-usb-hsotg.c @@ -0,0 +1,41 @@ +/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for USB high-speed UDC/OtG block + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +static struct resource s3c_usb_hsotg_resources[] = { + [0] = { + .start = S3C_PA_USB_HSOTG, + .end = S3C_PA_USB_HSOTG + 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_OTG, + .end = IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_usb_hsotg = { + .name = "s3c-hsotg", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources), + .resource = s3c_usb_hsotg_resources, +}; diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c new file mode 100644 index 000000000000..2ee85abed6d9 --- /dev/null +++ b/arch/arm/plat-s3c/dev-usb.c @@ -0,0 +1,50 @@ +/* linux/arch/arm/plat-s3c/dev-usb.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for USB host + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + + +static struct resource s3c_usb_resource[] = { + [0] = { + .start = S3C_PA_USBHOST, + .end = S3C_PA_USBHOST + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBH, + .end = IRQ_USBH, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_usb_dmamask = 0xffffffffUL; + +struct platform_device s3c_device_usb = { + .name = "s3c2410-ohci", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_usb_resource), + .resource = s3c_usb_resource, + .dev = { + .dma_mask = &s3c_device_usb_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; + +EXPORT_SYMBOL(s3c_device_usb); diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c new file mode 100644 index 000000000000..c9db75c06af5 --- /dev/null +++ b/arch/arm/plat-s3c/dma.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/plat-s3c/dma.c + * + * Copyright (c) 2003-2005,2006,2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C DMA core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct s3c2410_dma_buf; + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> + +#include <mach/dma.h> +#include <mach/irqs.h> + +#include <plat/dma-plat.h> + +/* dma channel state information */ +struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; +struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX]; + +/* s3c_dma_lookup_channel + * + * change the dma channel number given into a real dma channel id +*/ + +struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) +{ + if (channel & DMACH_LOW_LEVEL) + return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; + else + return s3c_dma_chan_map[channel]; +} + +/* do we need to protect the settings of the fields from + * irq? +*/ + +int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn); + + chan->op_fn = rtn; + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_set_opfn); + +int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn); + + chan->callback_fn = rtn; + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); + +int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + chan->flags = flags; + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_setflags); diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c index d71dd6d9ce5c..260fdc6ad685 100644 --- a/arch/arm/plat-s3c/gpio.c +++ b/arch/arm/plat-s3c/gpio.c @@ -16,7 +16,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <plat/gpio-core.h> +#include <mach/gpio-core.h> #ifdef CONFIG_S3C_GPIO_TRACK struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; @@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) if (!gc->get) gc->get = s3c_gpiolib_get; +#ifdef CONFIG_PM + if (chip->pm != NULL) { + if (!chip->pm->save || !chip->pm->resume) + printk(KERN_ERR "gpio: %s has missing PM functions\n", + gc->label); + } else + printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); +#endif + /* gpiochip_add() prints own failure message on error. */ ret = gpiochip_add(gc); if (ret >= 0) diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h index 43df2a404b0b..d847bd476b6c 100644 --- a/arch/arm/plat-s3c/include/plat/adc.h +++ b/arch/arm/plat-s3c/include/plat/adc.h @@ -19,10 +19,12 @@ struct s3c_adc_client; extern int s3c_adc_start(struct s3c_adc_client *client, unsigned int channel, unsigned int nr_samples); -extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev, - void (*select)(unsigned selected), - void (*conv)(unsigned d0, unsigned d1), - unsigned int is_ts); +extern struct s3c_adc_client * + s3c_adc_register(struct platform_device *pdev, + void (*select)(unsigned selected), + void (*conv)(unsigned d0, unsigned d1, + unsigned *samples_left), + unsigned int is_ts); extern void s3c_adc_release(struct s3c_adc_client *client); diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h index a10622eed43a..d86af84b5b8c 100644 --- a/arch/arm/plat-s3c/include/plat/clock.h +++ b/arch/arm/plat-s3c/include/plat/clock.h @@ -50,6 +50,7 @@ extern struct clk clk_xtal; extern struct clk clk_ext; /* S3C64XX specific clocks */ +extern struct clk clk_h2; extern struct clk clk_27m; extern struct clk clk_48m; diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h index e62ae0fcfe56..be541cbba070 100644 --- a/arch/arm/plat-s3c/include/plat/cpu.h +++ b/arch/arm/plat-s3c/include/plat/cpu.h @@ -69,3 +69,6 @@ extern struct sysdev_class s3c2412_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; +extern struct sysdev_class s3c6410_sysclass; +extern struct sysdev_class s3c64xx_sysclass; + diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 26f0cec3ac04..a0b6768fddcf 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1; extern struct platform_device s3c_device_nand; extern struct platform_device s3c_device_usbgadget; +extern struct platform_device s3c_device_usb_hsotg; /* s3c2440 specific devices */ diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-s3c/include/plat/dma-core.h new file mode 100644 index 000000000000..32ff2a92cb3c --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/dma-core.h @@ -0,0 +1,22 @@ +/* arch/arm/plat-s3c/include/plat/dma.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung S3C DMA core support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel); + +extern struct s3c2410_dma_chan *s3c_dma_chan_map[]; + +/* the currently allocated channel information */ +extern struct s3c2410_dma_chan s3c2410_chans[]; + + diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h new file mode 100644 index 000000000000..34dba98f08e1 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/dma.h @@ -0,0 +1,127 @@ +/* arch/arm/plat-s3c/include/plat/dma.h + * + * Copyright (C) 2003,2004,2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +enum s3c2410_dma_buffresult { + S3C2410_RES_OK, + S3C2410_RES_ERR, + S3C2410_RES_ABORT +}; + +enum s3c2410_dmasrc { + S3C2410_DMASRC_HW, /* source is memory */ + S3C2410_DMASRC_MEM /* source is hardware */ +}; + +/* enum s3c2410_chan_op + * + * operation codes passed to the DMA code by the user, and also used + * to inform the current channel owner of any changes to the system state +*/ + +enum s3c2410_chan_op { + S3C2410_DMAOP_START, + S3C2410_DMAOP_STOP, + S3C2410_DMAOP_PAUSE, + S3C2410_DMAOP_RESUME, + S3C2410_DMAOP_FLUSH, + S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ + S3C2410_DMAOP_STARTED, /* indicate channel started */ +}; + +struct s3c2410_dma_client { + char *name; +}; + +struct s3c2410_dma_chan; + +/* s3c2410_dma_cbfn_t + * + * buffer callback routine type +*/ + +typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, + void *buf, int size, + enum s3c2410_dma_buffresult result); + +typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, + enum s3c2410_chan_op ); + + + +/* s3c2410_dma_request + * + * request a dma channel exclusivley +*/ + +extern int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *, void *dev); + + +/* s3c2410_dma_ctrl + * + * change the state of the dma channel +*/ + +extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); + +/* s3c2410_dma_setflags + * + * set the channel's flags to a given state +*/ + +extern int s3c2410_dma_setflags(unsigned int channel, + unsigned int flags); + +/* s3c2410_dma_free + * + * free the dma channel (will also abort any outstanding operations) +*/ + +extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); + +/* s3c2410_dma_enqueue + * + * place the given buffer onto the queue of operations for the channel. + * The buffer must be allocated from dma coherent memory, or the Dcache/WB + * drained before the buffer is given to the DMA system. +*/ + +extern int s3c2410_dma_enqueue(unsigned int channel, void *id, + dma_addr_t data, int size); + +/* s3c2410_dma_config + * + * configure the dma channel +*/ + +extern int s3c2410_dma_config(unsigned int channel, int xferunit); + +/* s3c2410_dma_devconfig + * + * configure the device we're talking to +*/ + +extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, + unsigned long devaddr); + +/* s3c2410_dma_getposition + * + * get the position that the dma transfer is currently at +*/ + +extern int s3c2410_dma_getposition(unsigned int channel, + dma_addr_t *src, dma_addr_t *dest); + +extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); + + diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h index 2fc60a580ac8..32af612767aa 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-core.h +++ b/arch/arm/plat-s3c/include/plat/gpio-core.h @@ -20,6 +20,18 @@ * specific code. */ +struct s3c_gpio_chip; + +/** + * struct s3c_gpio_pm - power management (suspend/resume) information + * @save: Routine to save the state of the GPIO block + * @resume: Routine to resume the GPIO block. + */ +struct s3c_gpio_pm { + void (*save)(struct s3c_gpio_chip *chip); + void (*resume)(struct s3c_gpio_chip *chip); +}; + struct s3c_gpio_cfg; /** @@ -27,6 +39,7 @@ struct s3c_gpio_cfg; * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @config: special function and pull-resistor control information. + * @pm_save: Save information for suspend/resume support. * * This wrapper provides the necessary information for the Samsung * specific gpios being registered with gpiolib. @@ -34,7 +47,11 @@ struct s3c_gpio_cfg; struct s3c_gpio_chip { struct gpio_chip chip; struct s3c_gpio_cfg *config; + struct s3c_gpio_pm *pm; void __iomem *base; +#ifdef CONFIG_PM + u32 pm_save[4]; +#endif }; static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) @@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } #endif + +#ifdef CONFIG_PM +extern struct s3c_gpio_pm s3c_gpio_pm_1bit; +extern struct s3c_gpio_pm s3c_gpio_pm_2bit; +extern struct s3c_gpio_pm s3c_gpio_pm_4bit; +#define __gpio_pm(x) x +#else +#define s3c_gpio_pm_1bit NULL +#define s3c_gpio_pm_2bit NULL +#define s3c_gpio_pm_4bit NULL +#define __gpio_pm(x) NULL + +#endif /* CONFIG_PM */ diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index 3779775133a9..7a797192fcf3 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -44,6 +44,8 @@ extern void (*pm_cpu_sleep)(void); extern unsigned long s3c_pm_flags; +extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ + /* from sleep.S */ extern int s3c_cpu_save(unsigned long *saveblk); @@ -88,6 +90,7 @@ struct pm_uart_save { u32 ufcon; u32 umcon; u32 ubrdiv; + u32 udivslot; }; /* helper functions to save/restore lists of registers. */ @@ -124,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...); #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt) #endif +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK +/** + * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs + * @set: set bits for the state of the LEDs + * @clear: clear bits for the state of the LEDs. + */ +extern void s3c_pm_debug_smdkled(u32 set, u32 clear); + +#else +static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { } +#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */ + /* suspend memory checking */ #ifdef CONFIG_S3C2410_PM_CHECK diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h index 487d7d2a7e1d..66af75a5cdd1 100644 --- a/arch/arm/plat-s3c/include/plat/regs-serial.h +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -189,6 +189,11 @@ #define S3C2443_DIVSLOT (0x2C) +/* S3C64XX interrupt registers. */ +#define S3C64XX_UINTP 0x30 +#define S3C64XX_UINTSP 0x34 +#define S3C64XX_UINTM 0x38 + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h index c4ca3920ca4b..f615308ccdfb 100644 --- a/arch/arm/plat-s3c/include/plat/sdhci.h +++ b/arch/arm/plat-s3c/include/plat/sdhci.h @@ -67,12 +67,52 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; /* Helper function availablity */ +extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w); + +/* S3C6400 SDHCI setup */ + +#ifdef CONFIG_S3C6400_SETUP_SDHCI +extern char *s3c6400_hsmmc_clksrcs[4]; + +#ifdef CONFIG_S3C_DEV_HSMMC +extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +static inline void s3c6400_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +} + +#else +static inline void s3c6400_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s3c6400_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +} +#else +static inline void s3c6400_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#else +static inline void s3c6400_default_sdhci0(void) { } +static inline void s3c6400_default_sdhci1(void) { } +#endif /* CONFIG_S3C6400_SETUP_SDHCI */ + +/* S3C6410 SDHCI setup */ + #ifdef CONFIG_S3C6410_SETUP_SDHCI extern char *s3c6410_hsmmc_clksrcs[4]; -extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w); -extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w); - extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, void __iomem *r, struct mmc_ios *ios, @@ -82,7 +122,7 @@ extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, static inline void s3c6410_default_sdhci0(void) { s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs; - s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; } #else @@ -93,7 +133,7 @@ static inline void s3c6410_default_sdhci0(void) { } static inline void s3c6410_default_sdhci1(void) { s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs; - s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; } #else diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h new file mode 100644 index 000000000000..dd04db043109 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/udc-hs.h @@ -0,0 +1,29 @@ +/* arch/arm/plat-s3c/include/plat/udc-hs.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C USB2.0 High-speed / OtG platform information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +enum s3c_hostg_dmamode { + S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ + S3C_HSOTG_DMA_ONLY, /* always use DMA */ + S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ +}; + +/** + * struct s3c_hsotg_plat - platform data for high-speed otg/udc + * @dma: Whether to use DMA or not. + * @is_osc: The clock source is an oscillator, not a crystal + */ +struct s3c_hsotg_plat { + enum s3c_hostg_dmamode dma; + unsigned int is_osc : 1; +}; diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h new file mode 100644 index 000000000000..54b762acb5a0 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/watchdog-reset.h @@ -0,0 +1,49 @@ +/* arch/arm/plat-s3c/include/plat/watchdog-reset.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - System define for arch_reset() function + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/regs-watchdog.h> +#include <mach/map.h> + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +static inline void arch_wdt_reset(void) +{ + struct clk *wdtclk; + + printk("arch_reset: attempting watchdog reset\n"); + + __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ + + wdtclk = clk_get(NULL, "watchdog"); + if (!IS_ERR(wdtclk)) { + clk_enable(wdtclk); + } else + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + + /* put initial values into count and data */ + __raw_writel(0x80, S3C2410_WTCNT); + __raw_writel(0x80, S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | + S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); +} diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c new file mode 100644 index 000000000000..cfd326a8b693 --- /dev/null +++ b/arch/arm/plat-s3c/pm-gpio.c @@ -0,0 +1,380 @@ + +/* linux/arch/arm/plat-s3c/pm-gpio.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO PM code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/sysdev.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/gpio-core.h> +#include <plat/pm.h> + +/* PM GPIO helpers */ + +#define OFFS_CON (0x00) +#define OFFS_DAT (0x04) +#define OFFS_UP (0x08) + +static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); +} + +static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon = __raw_readl(base + OFFS_CON); + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpcon = chip->pm_save[0]; + u32 gps_gpdat = chip->pm_save[1]; + u32 gpcon; + + /* GPACON only has one bit per control / data and no PULLUPs. + * GPACON[x] = 0 => Output, 1 => SFN */ + + /* first set all SFN bits to SFN */ + + gpcon = old_gpcon | gps_gpcon; + __raw_writel(gpcon, base + OFFS_CON); + + /* now set all the other bits */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + + S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_1bit = { + .save = s3c_gpio_pm_1bit_save, + .resume = s3c_gpio_pm_1bit_resume, +}; + +static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); + chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP); +} + +/* Test whether the given masked+shifted bits of an GPIO configuration + * are one of the SFN (special function) modes. */ + +static inline int is_sfn(unsigned long con) +{ + return con >= 2; +} + +/* Test if the given masked+shifted GPIO configuration is an input */ + +static inline int is_in(unsigned long con) +{ + return con == 0; +} + +/* Test if the given masked+shifted GPIO configuration is an output */ + +static inline int is_out(unsigned long con) +{ + return con == 1; +} + +/** + * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank + * @chip: The chip information to resume. + * + * Restore one of the GPIO banks that was saved during suspend. This is + * not as simple as once thought, due to the possibility of glitches + * from the order that the CON and DAT registers are set in. + * + * The three states the pin can be are {IN,OUT,SFN} which gives us 9 + * combinations of changes to check. Three of these, if the pin stays + * in the same configuration can be discounted. This leaves us with + * the following: + * + * { IN => OUT } Change DAT first + * { IN => SFN } Change CON first + * { OUT => SFN } Change CON first, so new data will not glitch + * { OUT => IN } Change CON first, so new data will not glitch + * { SFN => IN } Change CON first + * { SFN => OUT } Change DAT first, so new data will not glitch [1] + * + * We do not currently deal with the UP registers as these control + * weak resistors, so a small delay in change should not need to bring + * these into the calculations. + * + * [1] this assumes that writing to a pin DAT whilst in SFN will set the + * state for when it is next output. + */ +static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon = __raw_readl(base + OFFS_CON); + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpcon = chip->pm_save[0]; + u32 gps_gpdat = chip->pm_save[1]; + u32 gpcon, old, new, mask; + u32 change_mask = 0x0; + int nr; + + /* restore GPIO pull-up settings */ + __raw_writel(chip->pm_save[2], base + OFFS_UP); + + /* Create a change_mask of all the items that need to have + * their CON value changed before their DAT value, so that + * we minimise the work between the two settings. + */ + + for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) { + old = (old_gpcon & mask) >> nr; + new = (gps_gpcon & mask) >> nr; + + /* If there is no change, then skip */ + + if (old == new) + continue; + + /* If both are special function, then skip */ + + if (is_sfn(old) && is_sfn(new)) + continue; + + /* Change is IN => OUT, do not change now */ + + if (is_in(old) && is_out(new)) + continue; + + /* Change is SFN => OUT, do not change now */ + + if (is_sfn(old) && is_out(new)) + continue; + + /* We should now be at the case of IN=>SFN, + * OUT=>SFN, OUT=>IN, SFN=>IN. */ + + change_mask |= mask; + } + + + /* Write the new CON settings */ + + gpcon = old_gpcon & ~change_mask; + gpcon |= gps_gpcon & change_mask; + + __raw_writel(gpcon, base + OFFS_CON); + + /* Now change any items that require DAT,CON */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + + S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_2bit = { + .save = s3c_gpio_pm_2bit_save, + .resume = s3c_gpio_pm_2bit_resume, +}; + +#ifdef CONFIG_ARCH_S3C64XX +static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT); + chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP); + + if (chip->chip.ngpio > 8) + chip->pm_save[0] = __raw_readl(chip->base - 4); +} + +static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) +{ + u32 old, new, mask; + u32 change_mask = 0x0; + int nr; + + for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) { + old = (old_gpcon & mask) >> nr; + new = (gps_gpcon & mask) >> nr; + + /* If there is no change, then skip */ + + if (old == new) + continue; + + /* If both are special function, then skip */ + + if (is_sfn(old) && is_sfn(new)) + continue; + + /* Change is IN => OUT, do not change now */ + + if (is_in(old) && is_out(new)) + continue; + + /* Change is SFN => OUT, do not change now */ + + if (is_sfn(old) && is_out(new)) + continue; + + /* We should now be at the case of IN=>SFN, + * OUT=>SFN, OUT=>IN, SFN=>IN. */ + + change_mask |= mask; + } + + return change_mask; +} + +static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) +{ + void __iomem *con = chip->base + (index * 4); + u32 old_gpcon = __raw_readl(con); + u32 gps_gpcon = chip->pm_save[index + 1]; + u32 gpcon, mask; + + mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); + + gpcon = old_gpcon & ~mask; + gpcon |= gps_gpcon & mask; + + __raw_writel(gpcon, con); +} + +static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon[2]; + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpdat = chip->pm_save[2]; + + /* First, modify the CON settings */ + + old_gpcon[0] = 0; + old_gpcon[1] = __raw_readl(base + OFFS_CON); + + s3c_gpio_pm_4bit_con(chip, 0); + if (chip->chip.ngpio > 8) { + old_gpcon[0] = __raw_readl(base - 4); + s3c_gpio_pm_4bit_con(chip, -1); + } + + /* Now change the configurations that require DAT,CON */ + + __raw_writel(chip->pm_save[2], base + OFFS_DAT); + __raw_writel(chip->pm_save[1], base + OFFS_CON); + if (chip->chip.ngpio > 8) + __raw_writel(chip->pm_save[0], base - 4); + + __raw_writel(chip->pm_save[2], base + OFFS_DAT); + __raw_writel(chip->pm_save[3], base + OFFS_UP); + + if (chip->chip.ngpio > 8) { + S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon[0], old_gpcon[1], + __raw_readl(base - 4), + __raw_readl(base + OFFS_CON), + old_gpdat, gps_gpdat); + } else + S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon[1], + __raw_readl(base + OFFS_CON), + old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_4bit = { + .save = s3c_gpio_pm_4bit_save, + .resume = s3c_gpio_pm_4bit_resume, +}; +#endif /* CONFIG_ARCH_S3C64XX */ + +/** + * s3c_pm_save_gpio() - save gpio chip data for suspend + * @ourchip: The chip for suspend. + */ +static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) +{ + struct s3c_gpio_pm *pm = ourchip->pm; + + if (pm == NULL || pm->save == NULL) + S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); + else + pm->save(ourchip); +} + +/** + * s3c_pm_save_gpios() - Save the state of the GPIO banks. + * + * For all the GPIO banks, save the state of each one ready for going + * into a suspend mode. + */ +void s3c_pm_save_gpios(void) +{ + struct s3c_gpio_chip *ourchip; + unsigned int gpio_nr; + + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + ourchip = s3c_gpiolib_getchip(gpio_nr); + if (!ourchip) + continue; + + s3c_pm_save_gpio(ourchip); + + S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n", + ourchip->chip.label, + ourchip->pm_save[0], + ourchip->pm_save[1], + ourchip->pm_save[2], + ourchip->pm_save[3]); + + gpio_nr += ourchip->chip.ngpio; + gpio_nr += CONFIG_S3C_GPIO_SPACE; + } +} + +/** + * s3c_pm_resume_gpio() - restore gpio chip data after suspend + * @ourchip: The suspended chip. + */ +static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) +{ + struct s3c_gpio_pm *pm = ourchip->pm; + + if (pm == NULL || pm->resume == NULL) + S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); + else + pm->resume(ourchip); +} + +void s3c_pm_restore_gpios(void) +{ + struct s3c_gpio_chip *ourchip; + unsigned int gpio_nr; + + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + ourchip = s3c_gpiolib_getchip(gpio_nr); + if (!ourchip) + continue; + + s3c_pm_resume_gpio(ourchip); + + gpio_nr += ourchip->chip.ngpio; + gpio_nr += CONFIG_S3C_GPIO_SPACE; + } +} diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index 061182ca66e3..8d97db2c7a0d 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -21,11 +21,10 @@ #include <asm/cacheflush.h> #include <mach/hardware.h> +#include <mach/map.h> #include <plat/regs-serial.h> #include <mach/regs-clock.h> -#include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-irq.h> #include <asm/irq.h> @@ -70,6 +69,8 @@ static inline void s3c_pm_debug_init(void) /* Save the UART configurations if we are configured for debug. */ +unsigned char pm_uart_udivslot; + #ifdef CONFIG_S3C2410_PM_DEBUG struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; @@ -83,6 +84,12 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) save->ufcon = __raw_readl(regs + S3C2410_UFCON); save->umcon = __raw_readl(regs + S3C2410_UMCON); save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV); + + if (pm_uart_udivslot) + save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT); + + S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n", + uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv); } static void s3c_pm_save_uarts(void) @@ -98,11 +105,16 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) { void __iomem *regs = S3C_VA_UARTx(uart); + s3c_pm_arch_update_uart(regs, save); + __raw_writel(save->ulcon, regs + S3C2410_ULCON); __raw_writel(save->ucon, regs + S3C2410_UCON); __raw_writel(save->ufcon, regs + S3C2410_UFCON); __raw_writel(save->umcon, regs + S3C2410_UMCON); __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV); + + if (pm_uart_udivslot) + __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT); } static void s3c_pm_restore_uarts(void) @@ -313,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state) S3C_PMDBG("%s: post sleep, preparing to return\n", __func__); + /* LEDs should now be 1110 */ + s3c_pm_debug_smdkled(1 << 1, 0); + s3c_pm_check_restore(); /* ok, let's return from sleep */ diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 2c8a2f5d75ff..5b0bc914f58e 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -71,6 +71,7 @@ config PM_SIMTEC config S3C2410_DMA bool "S3C2410 DMA support" depends on ARCH_S3C2410 + select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which use the S3C2410's DMA system to move data to and from the diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 91adfa71c172..ee1baf11ad9e 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -45,7 +45,8 @@ struct s3c_adc_client { unsigned char channel; void (*select_cb)(unsigned selected); - void (*convert_cb)(unsigned val1, unsigned val2); + void (*convert_cb)(unsigned val1, unsigned val2, + unsigned *samples_left); }; struct adc_device { @@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select) struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev, void (*select)(unsigned int selected), - void (*conv)(unsigned d0, unsigned d1), + void (*conv)(unsigned d0, unsigned d1, + unsigned *samples_left), unsigned int is_ts) { struct s3c_adc_client *client; @@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) data1 = readl(adc->regs + S3C2410_ADCDAT1); adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1); - (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff); + client->nr_samples--; + (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples); - if (--client->nr_samples > 0) { + if (client->nr_samples > 0) { /* fire another conversion for this */ client->select_cb(1); diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 1a8347cec20a..aa119863c5ce 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -18,6 +18,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/sysdev.h> #include <linux/platform_device.h> @@ -47,27 +48,27 @@ /* LED devices */ static struct s3c24xx_led_platdata smdk_pdata_led4 = { - .gpio = S3C2410_GPF4, + .gpio = S3C2410_GPF(4), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led4", .def_trigger = "timer", }; static struct s3c24xx_led_platdata smdk_pdata_led5 = { - .gpio = S3C2410_GPF5, + .gpio = S3C2410_GPF(5), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led5", .def_trigger = "nand-disk", }; static struct s3c24xx_led_platdata smdk_pdata_led6 = { - .gpio = S3C2410_GPF6, + .gpio = S3C2410_GPF(6), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led6", }; static struct s3c24xx_led_platdata smdk_pdata_led7 = { - .gpio = S3C2410_GPF7, + .gpio = S3C2410_GPF(7), .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, .name = "led7", }; @@ -184,15 +185,15 @@ void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP); + s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPF4, 1); - s3c2410_gpio_setpin(S3C2410_GPF5, 1); - s3c2410_gpio_setpin(S3C2410_GPF6, 1); - s3c2410_gpio_setpin(S3C2410_GPF7, 1); + s3c2410_gpio_setpin(S3C2410_GPF(4), 1); + s3c2410_gpio_setpin(S3C2410_GPF(5), 1); + s3c2410_gpio_setpin(S3C2410_GPF(6), 1); + s3c2410_gpio_setpin(S3C2410_GPF(7), 1); if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 16ac01d9b8ab..4eb378c89a39 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = { struct platform_device *s3c24xx_uart_devs[4] = { }; -/* USB Host Controller */ - -static struct resource s3c_usb_resource[] = { - [0] = { - .start = S3C24XX_PA_USBHOST, - .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBH, - .end = IRQ_USBH, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_usb_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_usb = { - .name = "s3c2410-ohci", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_usb_resource), - .resource = s3c_usb_resource, - .dev = { - .dma_mask = &s3c_device_usb_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_usb); - /* LCD Controller */ static struct resource s3c_lcd_resource[] = { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 07326f632361..196b19123653 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -31,10 +31,10 @@ #include <asm/irq.h> #include <mach/hardware.h> #include <mach/dma.h> - #include <mach/map.h> -#include <plat/dma.h> +#include <plat/dma-plat.h> +#include <plat/regs-dma.h> /* io map for dma */ static void __iomem *dma_base; @@ -44,8 +44,6 @@ static int dma_channels; static struct s3c24xx_dma_selection dma_sel; -/* dma channel state information */ -struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; /* debugging functions */ @@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) #define dbg_showchan(chan) do { } while(0) #endif /* CONFIG_S3C2410_DMA_DEBUG */ -static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; - -/* lookup_dma_channel - * - * change the dma channel number given into a real dma channel id -*/ - -static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) -{ - if (channel & DMACH_LOW_LEVEL) - return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; - else - return dma_chan_map[channel]; -} - /* s3c2410_dma_stats_timeout * * Update DMA stats from timeout info @@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) return 0; } - - /* s3c2410_dma_loadbuffer * * load a buffer, and update the channel state @@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) int s3c2410_dma_enqueue(unsigned int channel, void *id, dma_addr_t data, int size) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); struct s3c2410_dma_buf *buf; unsigned long flags; @@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; if (chan == NULL) @@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) chan->irq_claimed = 0; if (!(channel & DMACH_LOW_LEVEL)) - dma_chan_map[channel] = NULL; + s3c_dma_chan_map[channel] = NULL; local_irq_restore(flags); @@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); if (chan == NULL) return -EINVAL; @@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); /* s3c2410_dma_config * * xfersize: size of unit in bytes (1,2,4) - * dcon: base value of the DCONx register */ int s3c2410_dma_config(unsigned int channel, - int xferunit, - int dcon) + int xferunit) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + unsigned int dcon; pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", __func__, channel, xferunit, dcon); @@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel, pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); - dcon |= chan->dcon & dma_sel.dcon_mask; + dcon = chan->dcon & dma_sel.dcon_mask; pr_debug("%s: New dcon is %08x\n", __func__, dcon); + switch (chan->req_ch) { + case DMACH_I2S_IN: + case DMACH_I2S_OUT: + case DMACH_PCM_IN: + case DMACH_PCM_OUT: + case DMACH_MIC_IN: + default: + dcon |= S3C2410_DCON_HANDSHAKE; + dcon |= S3C2410_DCON_SYNC_PCLK; + break; + + case DMACH_SDI: + /* note, ensure if need HANDSHAKE or not */ + dcon |= S3C2410_DCON_SYNC_PCLK; + break; + + case DMACH_XD0: + case DMACH_XD1: + dcon |= S3C2410_DCON_HANDSHAKE; + dcon |= S3C2410_DCON_SYNC_HCLK; + break; + } + switch (xferunit) { case 1: dcon |= S3C2410_DCON_BYTE; @@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel, EXPORT_SYMBOL(s3c2410_dma_config); -int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags); - - chan->flags = flags; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_setflags); - - -/* do we need to protect the settings of the fields from - * irq? -*/ - -int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn); - - chan->op_fn = rtn; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_set_opfn); - -int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) -{ - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn); - - chan->callback_fn = rtn; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); /* s3c2410_dma_devconfig * @@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); * source: S3C2410_DMASRC_HW: source is hardware * S3C2410_DMASRC_MEM: source is memory * - * hwcfg: the value for xxxSTCn register, - * bit 0: 0=increment pointer, 1=leave pointer - * bit 1: 0=source is AHB, 1=source is APB - * * devaddr: physical address of the source */ int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, - int hwcfg, unsigned long devaddr) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + unsigned int hwcfg; if (chan == NULL) return -EINVAL; - pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", - __func__, (int)source, hwcfg, devaddr); + pr_debug("%s: source=%d, devaddr=%08lx\n", + __func__, (int)source, devaddr); chan->source = source; chan->dev_addr = devaddr; - chan->hw_cfg = hwcfg; + + switch (chan->req_ch) { + case DMACH_XD0: + case DMACH_XD1: + hwcfg = 0; /* AHB */ + break; + + default: + hwcfg = S3C2410_DISRCC_APB; + } + + /* always assume our peripheral desintation is a fixed + * address in memory. */ + hwcfg |= S3C2410_DISRCC_INC; switch (source) { case S3C2410_DMASRC_HW: @@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst) { - struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); if (chan == NULL) return -EINVAL; @@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev) printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); - s3c2410_dma_config(no, cp->xfer_unit, cp->dcon); - s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr); + s3c2410_dma_config(no, cp->xfer_unit); + s3c2410_dma_devconfig(no, cp->source, cp->dev_addr); /* re-select the dma source for this channel */ @@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) found: dmach = &s3c2410_chans[ch]; dmach->map = ch_map; - dma_chan_map[channel] = dmach; + dmach->req_ch = channel; + s3c_dma_chan_map[channel] = dmach; /* select the channel */ diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 4a899c279eb5..95df059b5a1d 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr); int s3c2410_gpio_getirq(unsigned int pin) { - if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15) - return -1; /* not valid interrupts */ + if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15)) + return -EINVAL; /* not valid interrupts */ - if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) - return -1; /* not valid pin */ + if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7)) + return -EINVAL; /* not valid pin */ - if (pin < S3C2410_GPF4) - return (pin - S3C2410_GPF0) + IRQ_EINT0; + if (pin < S3C2410_GPF(4)) + return (pin - S3C2410_GPF(0)) + IRQ_EINT0; - if (pin < S3C2410_GPG0) - return (pin - S3C2410_GPF4) + IRQ_EINT4; + if (pin < S3C2410_GPG(0)) + return (pin - S3C2410_GPF(4)) + IRQ_EINT4; - return (pin - S3C2410_GPG0) + IRQ_EINT8; + return (pin - S3C2410_GPG(0)) + IRQ_EINT8; } EXPORT_SYMBOL(s3c2410_gpio_getirq); - -int s3c2410_gpio_irq2pin(unsigned int irq) -{ - if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3) - return S3C2410_GPF0 + (irq - IRQ_EINT0); - - if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7) - return S3C2410_GPF4 + (irq - IRQ_EINT4); - - if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23) - return S3C2410_GPG0 + (irq - IRQ_EINT8); - - return -EINVAL; -} - -EXPORT_SYMBOL(s3c2410_gpio_irq2pin); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 5c0491bf738b..6d7a961d3269 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> +#include <linux/sysdev.h> #include <linux/ioport.h> #include <linux/io.h> #include <linux/gpio.h> @@ -22,6 +23,7 @@ #include <mach/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <plat/pm.h> #include <mach/regs-gpio.h> @@ -77,9 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPA0), + .base = S3C2410_GPACON, + .pm = __gpio_pm(&s3c_gpio_pm_1bit), .chip = { - .base = S3C2410_GPA0, + .base = S3C2410_GPA(0), .owner = THIS_MODULE, .label = "GPIOA", .ngpio = 24, @@ -88,45 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [1] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPB0), + .base = S3C2410_GPBCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPB0, + .base = S3C2410_GPB(0), .owner = THIS_MODULE, .label = "GPIOB", .ngpio = 16, }, }, [2] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPC0), + .base = S3C2410_GPCCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPC0, + .base = S3C2410_GPC(0), .owner = THIS_MODULE, .label = "GPIOC", .ngpio = 16, }, }, [3] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPD0), + .base = S3C2410_GPDCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPD0, + .base = S3C2410_GPD(0), .owner = THIS_MODULE, .label = "GPIOD", .ngpio = 16, }, }, [4] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPE0), + .base = S3C2410_GPECON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPE0, + .base = S3C2410_GPE(0), .label = "GPIOE", .owner = THIS_MODULE, .ngpio = 16, }, }, [5] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPF0), + .base = S3C2410_GPFCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPF0, + .base = S3C2410_GPF(0), .owner = THIS_MODULE, .label = "GPIOF", .ngpio = 8, @@ -134,14 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [6] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPG0), + .base = S3C2410_GPGCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { - .base = S3C2410_GPG0, + .base = S3C2410_GPG(0), .owner = THIS_MODULE, .label = "GPIOG", - .ngpio = 10, + .ngpio = 16, .to_irq = s3c24xx_gpiolib_bankg_toirq, }, + }, { + .base = S3C2410_GPHCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPH(0), + .owner = THIS_MODULE, + .label = "GPIOH", + .ngpio = 11, + }, }, }; @@ -156,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void) return 0; } -arch_initcall(s3c24xx_gpiolib_init); +core_initcall(s3c24xx_gpiolib_init); diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h index c78efe316fc8..9565ead1bc9b 100644 --- a/arch/arm/plat-s3c24xx/include/plat/dma.h +++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/dma.h +/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h * * Copyright (C) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -10,8 +10,10 @@ * published by the Free Software Foundation. */ +#include <plat/dma-core.h> + extern struct sysdev_class dma_sysclass; -extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; +extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; #define DMA_CH_VALID (1<<31) #define DMA_CH_NEVER (1<<30) @@ -31,8 +33,8 @@ struct s3c24xx_dma_map { const char *name; struct s3c24xx_dma_addr hw_addr; - unsigned long channels[S3C2410_DMA_CHANNELS]; - unsigned long channels_rx[S3C2410_DMA_CHANNELS]; + unsigned long channels[S3C_DMA_CHANNELS]; + unsigned long channels_rx[S3C_DMA_CHANNELS]; }; struct s3c24xx_dma_selection { @@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); */ struct s3c24xx_dma_order_ch { - unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */ + unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */ unsigned int flags; /* flags */ }; diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index eed8f78e7593..c4d133436fc7 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -58,7 +58,6 @@ #define S3C24XX_SZ_SPI SZ_1M #define S3C24XX_SZ_SDI SZ_1M #define S3C24XX_SZ_NAND SZ_1M -#define S3C24XX_SZ_USBHOST SZ_1M /* GPIO ports */ diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h index c75882113e04..fb45dd9adca5 100644 --- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h @@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void) s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), s3c_irqwake_eintmask); } + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ +} diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h new file mode 100644 index 000000000000..3bc0a216df97 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h @@ -0,0 +1,145 @@ +/* arch/arm/mach-s3c2410/include/mach/dma.h + * + * Copyright (C) 2003,2004,2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* DMA Register definitions */ + +#define S3C2410_DMA_DISRC (0x00) +#define S3C2410_DMA_DISRCC (0x04) +#define S3C2410_DMA_DIDST (0x08) +#define S3C2410_DMA_DIDSTC (0x0C) +#define S3C2410_DMA_DCON (0x10) +#define S3C2410_DMA_DSTAT (0x14) +#define S3C2410_DMA_DCSRC (0x18) +#define S3C2410_DMA_DCDST (0x1C) +#define S3C2410_DMA_DMASKTRIG (0x20) +#define S3C2412_DMA_DMAREQSEL (0x24) +#define S3C2443_DMA_DMAREQSEL (0x24) + +#define S3C2410_DISRCC_INC (1<<0) +#define S3C2410_DISRCC_APB (1<<1) + +#define S3C2410_DMASKTRIG_STOP (1<<2) +#define S3C2410_DMASKTRIG_ON (1<<1) +#define S3C2410_DMASKTRIG_SWTRIG (1<<0) + +#define S3C2410_DCON_DEMAND (0<<31) +#define S3C2410_DCON_HANDSHAKE (1<<31) +#define S3C2410_DCON_SYNC_PCLK (0<<30) +#define S3C2410_DCON_SYNC_HCLK (1<<30) + +#define S3C2410_DCON_INTREQ (1<<29) + +#define S3C2410_DCON_CH0_XDREQ0 (0<<24) +#define S3C2410_DCON_CH0_UART0 (1<<24) +#define S3C2410_DCON_CH0_SDI (2<<24) +#define S3C2410_DCON_CH0_TIMER (3<<24) +#define S3C2410_DCON_CH0_USBEP1 (4<<24) + +#define S3C2410_DCON_CH1_XDREQ1 (0<<24) +#define S3C2410_DCON_CH1_UART1 (1<<24) +#define S3C2410_DCON_CH1_I2SSDI (2<<24) +#define S3C2410_DCON_CH1_SPI (3<<24) +#define S3C2410_DCON_CH1_USBEP2 (4<<24) + +#define S3C2410_DCON_CH2_I2SSDO (0<<24) +#define S3C2410_DCON_CH2_I2SSDI (1<<24) +#define S3C2410_DCON_CH2_SDI (2<<24) +#define S3C2410_DCON_CH2_TIMER (3<<24) +#define S3C2410_DCON_CH2_USBEP3 (4<<24) + +#define S3C2410_DCON_CH3_UART2 (0<<24) +#define S3C2410_DCON_CH3_SDI (1<<24) +#define S3C2410_DCON_CH3_SPI (2<<24) +#define S3C2410_DCON_CH3_TIMER (3<<24) +#define S3C2410_DCON_CH3_USBEP4 (4<<24) + +#define S3C2410_DCON_SRCSHIFT (24) +#define S3C2410_DCON_SRCMASK (7<<24) + +#define S3C2410_DCON_BYTE (0<<20) +#define S3C2410_DCON_HALFWORD (1<<20) +#define S3C2410_DCON_WORD (2<<20) + +#define S3C2410_DCON_AUTORELOAD (0<<22) +#define S3C2410_DCON_NORELOAD (1<<22) +#define S3C2410_DCON_HWTRIG (1<<23) + +#ifdef CONFIG_CPU_S3C2440 +#define S3C2440_DIDSTC_CHKINT (1<<2) + +#define S3C2440_DCON_CH0_I2SSDO (5<<24) +#define S3C2440_DCON_CH0_PCMIN (6<<24) + +#define S3C2440_DCON_CH1_PCMOUT (5<<24) +#define S3C2440_DCON_CH1_SDI (6<<24) + +#define S3C2440_DCON_CH2_PCMIN (5<<24) +#define S3C2440_DCON_CH2_MICIN (6<<24) + +#define S3C2440_DCON_CH3_MICIN (5<<24) +#define S3C2440_DCON_CH3_PCMOUT (6<<24) +#endif + +#ifdef CONFIG_CPU_S3C2412 + +#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) + +#define S3C2412_DMAREQSEL_HW (1) + +#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) +#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) +#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) +#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) +#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) +#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) +#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) +#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) +#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) +#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) +#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) +#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) +#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) +#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) +#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) +#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) +#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) +#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) +#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) +#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) + +#endif + +#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) + +#define S3C2443_DMAREQSEL_HW (1) + +#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) +#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) +#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) +#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) +#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) +#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) +#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) +#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) +#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) +#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) +#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) +#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) +#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) +#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) +#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) +#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) +#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) +#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) +#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) +#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) +#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 062a29339a91..56e5253ca02c 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -30,6 +30,7 @@ #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/serial_core.h> #include <linux/io.h> @@ -75,43 +76,10 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_CLKSLOW), }; -static struct gpio_sleep { - void __iomem *base; - unsigned int gpcon; - unsigned int gpdat; - unsigned int gpup; -} gpio_save[] = { - [0] = { - .base = S3C2410_GPACON, - }, - [1] = { - .base = S3C2410_GPBCON, - }, - [2] = { - .base = S3C2410_GPCCON, - }, - [3] = { - .base = S3C2410_GPDCON, - }, - [4] = { - .base = S3C2410_GPECON, - }, - [5] = { - .base = S3C2410_GPFCON, - }, - [6] = { - .base = S3C2410_GPGCON, - }, - [7] = { - .base = S3C2410_GPHCON, - }, -}; - static struct sleep_save misc_save[] = { SAVE_ITEM(S3C2410_DCLKCON), }; - /* s3c_pm_check_resume_pin * * check to see if the pin is configured correctly for sleep mode, and @@ -156,195 +124,15 @@ void s3c_pm_configure_extint(void) * and then configure it as an input if it is not */ - for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0); - } - - for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); + for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) { + s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0)); } -} - -/* offsets for CON/DAT/UP registers */ - -#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON) -#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON) -#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON) - -/* s3c_pm_save_gpios() - * - * Save the state of the GPIOs - */ - -void s3c_pm_save_gpios(void) -{ - struct gpio_sleep *gps = gpio_save; - unsigned int gpio; - - for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { - void __iomem *base = gps->base; - - gps->gpcon = __raw_readl(base + OFFS_CON); - gps->gpdat = __raw_readl(base + OFFS_DAT); - - if (gpio > 0) - gps->gpup = __raw_readl(base + OFFS_UP); + for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) { + s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8); } } -/* Test whether the given masked+shifted bits of an GPIO configuration - * are one of the SFN (special function) modes. */ - -static inline int is_sfn(unsigned long con) -{ - return (con == 2 || con == 3); -} - -/* Test if the given masked+shifted GPIO configuration is an input */ - -static inline int is_in(unsigned long con) -{ - return con == 0; -} - -/* Test if the given masked+shifted GPIO configuration is an output */ - -static inline int is_out(unsigned long con) -{ - return con == 1; -} - -/** - * s3c2410_pm_restore_gpio() - restore the given GPIO bank - * @index: The number of the GPIO bank being resumed. - * @gps: The sleep confgiuration for the bank. - * - * Restore one of the GPIO banks that was saved during suspend. This is - * not as simple as once thought, due to the possibility of glitches - * from the order that the CON and DAT registers are set in. - * - * The three states the pin can be are {IN,OUT,SFN} which gives us 9 - * combinations of changes to check. Three of these, if the pin stays - * in the same configuration can be discounted. This leaves us with - * the following: - * - * { IN => OUT } Change DAT first - * { IN => SFN } Change CON first - * { OUT => SFN } Change CON first, so new data will not glitch - * { OUT => IN } Change CON first, so new data will not glitch - * { SFN => IN } Change CON first - * { SFN => OUT } Change DAT first, so new data will not glitch [1] - * - * We do not currently deal with the UP registers as these control - * weak resistors, so a small delay in change should not need to bring - * these into the calculations. - * - * [1] this assumes that writing to a pin DAT whilst in SFN will set the - * state for when it is next output. - */ - -static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) -{ - void __iomem *base = gps->base; - unsigned long gps_gpcon = gps->gpcon; - unsigned long gps_gpdat = gps->gpdat; - unsigned long old_gpcon; - unsigned long old_gpdat; - unsigned long old_gpup = 0x0; - unsigned long gpcon; - int nr; - - old_gpcon = __raw_readl(base + OFFS_CON); - old_gpdat = __raw_readl(base + OFFS_DAT); - - if (base == S3C2410_GPACON) { - /* GPACON only has one bit per control / data and no PULLUPs. - * GPACON[x] = 0 => Output, 1 => SFN */ - - /* first set all SFN bits to SFN */ - - gpcon = old_gpcon | gps->gpcon; - __raw_writel(gpcon, base + OFFS_CON); - - /* now set all the other bits */ - - __raw_writel(gps_gpdat, base + OFFS_DAT); - __raw_writel(gps_gpcon, base + OFFS_CON); - } else { - unsigned long old, new, mask; - unsigned long change_mask = 0x0; - - old_gpup = __raw_readl(base + OFFS_UP); - - /* Create a change_mask of all the items that need to have - * their CON value changed before their DAT value, so that - * we minimise the work between the two settings. - */ - - for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) { - old = (old_gpcon & mask) >> nr; - new = (gps_gpcon & mask) >> nr; - - /* If there is no change, then skip */ - - if (old == new) - continue; - - /* If both are special function, then skip */ - - if (is_sfn(old) && is_sfn(new)) - continue; - - /* Change is IN => OUT, do not change now */ - - if (is_in(old) && is_out(new)) - continue; - - /* Change is SFN => OUT, do not change now */ - - if (is_sfn(old) && is_out(new)) - continue; - - /* We should now be at the case of IN=>SFN, - * OUT=>SFN, OUT=>IN, SFN=>IN. */ - - change_mask |= mask; - } - - /* Write the new CON settings */ - - gpcon = old_gpcon & ~change_mask; - gpcon |= gps_gpcon & change_mask; - - __raw_writel(gpcon, base + OFFS_CON); - - /* Now change any items that require DAT,CON */ - - __raw_writel(gps_gpdat, base + OFFS_DAT); - __raw_writel(gps_gpcon, base + OFFS_CON); - __raw_writel(gps->gpup, base + OFFS_UP); - } - - S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", - index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); -} - - -/** s3c2410_pm_restore_gpios() - * - * Restore the state of the GPIOs - */ - -void s3c_pm_restore_gpios(void) -{ - struct gpio_sleep *gps = gpio_save; - int gpio; - - for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { - s3c2410_pm_restore_gpio(gpio, gps); - } -} void s3c_pm_restore_core(void) { diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c index d62b7e7fb355..71a6accf114e 100644 --- a/arch/arm/plat-s3c24xx/setup-i2c.c +++ b/arch/arm/plat-s3c24xx/setup-i2c.c @@ -11,6 +11,7 @@ */ #include <linux/kernel.h> +#include <linux/gpio.h> struct platform_device; @@ -20,6 +21,6 @@ struct platform_device; void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA); - s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL); + s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); + s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); } diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 8b403cbb53d2..9edf7894eedd 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0); - s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0); - s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0); - s3c2410_gpio_pullup(S3C2410_GPE11, 0); - s3c2410_gpio_pullup(S3C2410_GPE13, 0); + s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); + s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); + s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); + s3c2410_gpio_pullup(S3C2410_GPE(11), 0); + s3c2410_gpio_pullup(S3C2410_GPE(13), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPE11, 1); - s3c2410_gpio_pullup(S3C2410_GPE12, 1); - s3c2410_gpio_pullup(S3C2410_GPE13, 1); + s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); + s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); + s3c2410_gpio_pullup(S3C2410_GPE(11), 1); + s3c2410_gpio_pullup(S3C2410_GPE(12), 1); + s3c2410_gpio_pullup(S3C2410_GPE(13), 1); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 8fccd4e549f0..f34d0fc69ad8 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1); - s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1); - s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPG5, 0); - s3c2410_gpio_pullup(S3C2410_GPG6, 0); + s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); + s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); + s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); + s3c2410_gpio_pullup(S3C2410_GPG(5), 0); + s3c2410_gpio_pullup(S3C2410_GPG(6), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPG5, 1); - s3c2410_gpio_pullup(S3C2410_GPG6, 1); - s3c2410_gpio_pullup(S3C2410_GPG7, 1); + s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); + s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); + s3c2410_gpio_pullup(S3C2410_GPG(5), 1); + s3c2410_gpio_pullup(S3C2410_GPG(6), 1); + s3c2410_gpio_pullup(S3C2410_GPG(7), 1); } } diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig index 54375a00a7d2..5ebd8b425a54 100644 --- a/arch/arm/plat-s3c64xx/Kconfig +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -19,6 +19,7 @@ config PLAT_S3C64XX select S3C_GPIO_PULL_UPDOWN select S3C_GPIO_CFG_S3C24XX select S3C_GPIO_CFG_S3C64XX + select USB_ARCH_HAS_OHCI help Base platform code for any Samsung S3C64XX device @@ -38,6 +39,10 @@ config CPU_S3C6400_CLOCK Common clock support code for the S3C6400 that is shared by other CPUs in the series, such as the S3C6410. +config S3C64XX_DMA + bool "S3C64XX DMA" + select S3C_DMA + # platform specific device setup config S3C64XX_SETUP_I2C0 @@ -59,4 +64,9 @@ config S3C64XX_SETUP_FB_24BPP help Common setup code for S3C64XX with an 24bpp RGB display helper. +config S3C64XX_SETUP_SDHCI_GPIO + bool + help + Common setup code for S3C64XX SDHCI GPIO configurations + endif diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile index 2e6d79bf8f33..2ed5df34f9ea 100644 --- a/arch/arm/plat-s3c64xx/Makefile +++ b/arch/arm/plat-s3c64xx/Makefile @@ -24,8 +24,19 @@ obj-y += gpiolib.o obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o +# PM support + +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += sleep.o +obj-$(CONFIG_PM) += irq-pm.o + +# DMA support + +obj-$(CONFIG_S3C64XX_DMA) += dma.o + # Device setup obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c index ad1b9682c9c3..0bc2fa1dfc40 100644 --- a/arch/arm/plat-s3c64xx/clock.c +++ b/arch/arm/plat-s3c64xx/clock.c @@ -27,6 +27,12 @@ #include <plat/devs.h> #include <plat/clock.h> +struct clk clk_h2 = { + .name = "hclk2", + .id = -1, + .rate = 0, +}; + struct clk clk_27m = { .name = "clk_27m", .id = -1, @@ -152,6 +158,18 @@ static struct clk init_clocks_disable[] = { .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, + }, { + .name = "dma0", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_DMA0, + }, { + .name = "dma1", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_DMA1, }, }; @@ -246,6 +264,7 @@ static struct clk *clks[] __initdata = { &clk_epll, &clk_27m, &clk_48m, + &clk_h2, }; void __init s3c64xx_register_clocks(void) diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c index 91f49a3a665d..b1fdd83940a6 100644 --- a/arch/arm/plat-s3c64xx/cpu.c +++ b/arch/arm/plat-s3c64xx/cpu.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> +#include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -101,9 +102,24 @@ static struct map_desc s3c_iodesc[] __initdata = { .pfn = __phys_to_pfn(S3C64XX_PA_MODEM), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_WATCHDOG, + .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG), + .length = SZ_4K, + .type = MT_DEVICE, }, }; + +struct sysdev_class s3c64xx_sysclass = { + .name = "s3c64xx-core", +}; + +static struct sys_device s3c64xx_sysdev = { + .cls = &s3c64xx_sysclass, +}; + + /* read cpu identification code */ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) @@ -115,5 +131,21 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) iotable_init(mach_desc, size); idcode = __raw_readl(S3C_VA_SYS + 0x118); + if (!idcode) { + /* S3C6400 has the ID register in a different place, + * and needs a write before it can be read. */ + + __raw_writel(0x0, S3C_VA_SYS + 0xA1C); + idcode = __raw_readl(S3C_VA_SYS + 0xA1C); + } + s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); } + +static __init int s3c64xx_sysdev_init(void) +{ + sysdev_class_register(&s3c64xx_sysclass); + return sysdev_register(&s3c64xx_sysdev); +} + +core_initcall(s3c64xx_sysdev_init); diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c new file mode 100644 index 000000000000..67aa93dbb69e --- /dev/null +++ b/arch/arm/plat-s3c64xx/dma.c @@ -0,0 +1,722 @@ +/* linux/arch/arm/plat-s3c64xx/dma.c + * + * Copyright 2009 Openmoko, Inc. + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX DMA core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/dmapool.h> +#include <linux/sysdev.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> + +#include <plat/dma-plat.h> +#include <plat/regs-sys.h> + +#include <asm/hardware/pl080.h> + +/* dma channel state information */ + +struct s3c64xx_dmac { + struct sys_device sysdev; + struct clk *clk; + void __iomem *regs; + struct s3c2410_dma_chan *channels; + enum dma_ch chanbase; +}; + +/* pool to provide LLI buffers */ +static struct dma_pool *dma_pool; + +/* Debug configuration and code */ + +static unsigned char debug_show_buffs = 0; + +static void dbg_showchan(struct s3c2410_dma_chan *chan) +{ + pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n", + chan->number, + readl(chan->regs + PL080_CH_SRC_ADDR), + readl(chan->regs + PL080_CH_DST_ADDR), + readl(chan->regs + PL080_CH_LLI), + readl(chan->regs + PL080_CH_CONTROL), + readl(chan->regs + PL080S_CH_CONTROL2), + readl(chan->regs + PL080S_CH_CONFIG)); +} + +static void show_lli(struct pl080s_lli *lli) +{ + pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n", + lli, lli->src_addr, lli->dst_addr, lli->next_lli, + lli->control0, lli->control1); +} + +static void dbg_showbuffs(struct s3c2410_dma_chan *chan) +{ + struct s3c64xx_dma_buff *ptr; + struct s3c64xx_dma_buff *end; + + pr_debug("DMA%d: buffs next %p, curr %p, end %p\n", + chan->number, chan->next, chan->curr, chan->end); + + ptr = chan->next; + end = chan->end; + + if (debug_show_buffs) { + for (; ptr != NULL; ptr = ptr->next) { + pr_debug("DMA%d: %08x ", + chan->number, ptr->lli_dma); + show_lli(ptr->lli); + } + } +} + +/* End of Debug */ + +static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel) +{ + struct s3c2410_dma_chan *chan; + unsigned int start, offs; + + start = 0; + + if (channel >= DMACH_PCM1_TX) + start = 8; + + for (offs = 0; offs < 8; offs++) { + chan = &s3c2410_chans[start + offs]; + if (!chan->in_use) + goto found; + } + + return NULL; + +found: + s3c_dma_chan_map[channel] = chan; + return chan; +} + +int s3c2410_dma_config(unsigned int channel, int xferunit) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + switch (xferunit) { + case 1: + chan->hw_width = 0; + break; + case 2: + chan->hw_width = 1; + break; + case 4: + chan->hw_width = 2; + break; + default: + printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_config); + +static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, + struct pl080s_lli *lli, + dma_addr_t data, int size) +{ + dma_addr_t src, dst; + u32 control0, control1; + + switch (chan->source) { + case S3C2410_DMASRC_HW: + src = chan->dev_addr; + dst = data; + control0 = PL080_CONTROL_SRC_AHB2; + control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; + control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT; + control0 |= PL080_CONTROL_DST_INCR; + break; + + case S3C2410_DMASRC_MEM: + src = data; + dst = chan->dev_addr; + control0 = PL080_CONTROL_DST_AHB2; + control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; + control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT; + control0 |= PL080_CONTROL_SRC_INCR; + break; + default: + BUG(); + } + + /* note, we do not currently setup any of the burst controls */ + + control1 = size >> chan->hw_width; /* size in no of xfers */ + control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */ + control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */ + + lli->src_addr = src; + lli->dst_addr = dst; + lli->next_lli = 0; + lli->control0 = control0; + lli->control1 = control1; +} + +static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan, + struct pl080s_lli *lli) +{ + void __iomem *regs = chan->regs; + + pr_debug("%s: LLI %p => regs\n", __func__, lli); + show_lli(lli); + + writel(lli->src_addr, regs + PL080_CH_SRC_ADDR); + writel(lli->dst_addr, regs + PL080_CH_DST_ADDR); + writel(lli->next_lli, regs + PL080_CH_LLI); + writel(lli->control0, regs + PL080_CH_CONTROL); + writel(lli->control1, regs + PL080S_CH_CONTROL2); +} + +static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan) +{ + struct s3c64xx_dmac *dmac = chan->dmac; + u32 config; + u32 bit = chan->bit; + + dbg_showchan(chan); + + pr_debug("%s: clearing interrupts\n", __func__); + + /* clear interrupts */ + writel(bit, dmac->regs + PL080_TC_CLEAR); + writel(bit, dmac->regs + PL080_ERR_CLEAR); + + pr_debug("%s: starting channel\n", __func__); + + config = readl(chan->regs + PL080S_CH_CONFIG); + config |= PL080_CONFIG_ENABLE; + + pr_debug("%s: writing config %08x\n", __func__, config); + writel(config, chan->regs + PL080S_CH_CONFIG); + + return 0; +} + +static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan) +{ + u32 config; + int timeout; + + pr_debug("%s: stopping channel\n", __func__); + + dbg_showchan(chan); + + config = readl(chan->regs + PL080S_CH_CONFIG); + config |= PL080_CONFIG_HALT; + writel(config, chan->regs + PL080S_CH_CONFIG); + + timeout = 1000; + do { + config = readl(chan->regs + PL080S_CH_CONFIG); + pr_debug("%s: %d - config %08x\n", __func__, timeout, config); + if (config & PL080_CONFIG_ACTIVE) + udelay(10); + else + break; + } while (--timeout > 0); + + if (config & PL080_CONFIG_ACTIVE) { + printk(KERN_ERR "%s: channel still active\n", __func__); + return -EFAULT; + } + + config = readl(chan->regs + PL080S_CH_CONFIG); + config &= ~PL080_CONFIG_ENABLE; + writel(config, chan->regs + PL080S_CH_CONFIG); + + return 0; +} + +static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan, + struct s3c64xx_dma_buff *buf, + enum s3c2410_dma_buffresult result) +{ + if (chan->callback_fn != NULL) + (chan->callback_fn)(chan, buf->pw, 0, result); +} + +static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff) +{ + dma_pool_free(dma_pool, buff->lli, buff->lli_dma); + kfree(buff); +} + +static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) +{ + struct s3c64xx_dma_buff *buff, *next; + u32 config; + + dbg_showchan(chan); + + pr_debug("%s: flushing channel\n", __func__); + + config = readl(chan->regs + PL080S_CH_CONFIG); + config &= ~PL080_CONFIG_ENABLE; + writel(config, chan->regs + PL080S_CH_CONFIG); + + /* dump all the buffers associated with this channel */ + + for (buff = chan->curr; buff != NULL; buff = next) { + next = buff->next; + pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next); + + s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT); + s3c64xx_dma_freebuff(buff); + } + + chan->curr = chan->next = chan->end = NULL; + + return 0; +} + +int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + WARN_ON(!chan); + if (!chan) + return -EINVAL; + + switch (op) { + case S3C2410_DMAOP_START: + return s3c64xx_dma_start(chan); + + case S3C2410_DMAOP_STOP: + return s3c64xx_dma_stop(chan); + + case S3C2410_DMAOP_FLUSH: + return s3c64xx_dma_flush(chan); + + /* belive PAUSE/RESUME are no-ops */ + case S3C2410_DMAOP_PAUSE: + case S3C2410_DMAOP_RESUME: + case S3C2410_DMAOP_STARTED: + case S3C2410_DMAOP_TIMEOUT: + return 0; + } + + return -ENOENT; +} +EXPORT_SYMBOL(s3c2410_dma_ctrl); + +/* s3c2410_dma_enque + * + */ + +int s3c2410_dma_enqueue(unsigned int channel, void *id, + dma_addr_t data, int size) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + struct s3c64xx_dma_buff *next; + struct s3c64xx_dma_buff *buff; + struct pl080s_lli *lli; + int ret; + + WARN_ON(!chan); + if (!chan) + return -EINVAL; + + buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL); + if (!buff) { + printk(KERN_ERR "%s: no memory for buffer\n", __func__); + return -ENOMEM; + } + + lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma); + if (!lli) { + printk(KERN_ERR "%s: no memory for lli\n", __func__); + ret = -ENOMEM; + goto err_buff; + } + + pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n", + __func__, buff, data, lli, (u32)buff->lli_dma, size); + + buff->lli = lli; + buff->pw = id; + + s3c64xx_dma_fill_lli(chan, lli, data, size); + + if ((next = chan->next) != NULL) { + struct s3c64xx_dma_buff *end = chan->end; + struct pl080s_lli *endlli = end->lli; + + pr_debug("enquing onto channel\n"); + + end->next = buff; + endlli->next_lli = buff->lli_dma; + + if (chan->flags & S3C2410_DMAF_CIRCULAR) { + struct s3c64xx_dma_buff *curr = chan->curr; + lli->next_lli = curr->lli_dma; + } + + if (next == chan->curr) { + writel(buff->lli_dma, chan->regs + PL080_CH_LLI); + chan->next = buff; + } + + show_lli(endlli); + chan->end = buff; + } else { + pr_debug("enquing onto empty channel\n"); + + chan->curr = buff; + chan->next = buff; + chan->end = buff; + + s3c64xx_lli_to_regs(chan, lli); + } + + show_lli(lli); + + dbg_showchan(chan); + dbg_showbuffs(chan); + return 0; + +err_buff: + kfree(buff); + return ret; +} + +EXPORT_SYMBOL(s3c2410_dma_enqueue); + + +int s3c2410_dma_devconfig(int channel, + enum s3c2410_dmasrc source, + unsigned long devaddr) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + u32 peripheral; + u32 config = 0; + + pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n", + __func__, channel, source, devaddr, chan); + + WARN_ON(!chan); + if (!chan) + return -EINVAL; + + peripheral = (chan->peripheral & 0xf); + chan->source = source; + chan->dev_addr = devaddr; + + pr_debug("%s: peripheral %d\n", __func__, peripheral); + + switch (source) { + case S3C2410_DMASRC_HW: + config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT; + config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT; + break; + case S3C2410_DMASRC_MEM: + config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT; + config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT; + break; + default: + printk(KERN_ERR "%s: bad source\n", __func__); + return -EINVAL; + } + + /* allow TC and ERR interrupts */ + config |= PL080_CONFIG_TC_IRQ_MASK; + config |= PL080_CONFIG_ERR_IRQ_MASK; + + pr_debug("%s: config %08x\n", __func__, config); + + writel(config, chan->regs + PL080S_CH_CONFIG); + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_devconfig); + + +int s3c2410_dma_getposition(unsigned int channel, + dma_addr_t *src, dma_addr_t *dst) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + WARN_ON(!chan); + if (!chan) + return -EINVAL; + + if (src != NULL) + *src = readl(chan->regs + PL080_CH_SRC_ADDR); + + if (dst != NULL) + *dst = readl(chan->regs + PL080_CH_DST_ADDR); + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_getposition); + +/* s3c2410_request_dma + * + * get control of an dma channel +*/ + +int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *client, + void *dev) +{ + struct s3c2410_dma_chan *chan; + unsigned long flags; + + pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", + channel, client->name, dev); + + local_irq_save(flags); + + chan = s3c64xx_dma_map_channel(channel); + if (chan == NULL) { + local_irq_restore(flags); + return -EBUSY; + } + + dbg_showchan(chan); + + chan->client = client; + chan->in_use = 1; + chan->peripheral = channel; + + local_irq_restore(flags); + + /* need to setup */ + + pr_debug("%s: channel initialised, %p\n", __func__, chan); + + return chan->number | DMACH_LOW_LEVEL; +} + +EXPORT_SYMBOL(s3c2410_dma_request); + +/* s3c2410_dma_free + * + * release the given channel back to the system, will stop and flush + * any outstanding transfers, and ensure the channel is ready for the + * next claimant. + * + * Note, although a warning is currently printed if the freeing client + * info is not the same as the registrant's client info, the free is still + * allowed to go through. +*/ + +int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + unsigned long flags; + + if (chan == NULL) + return -EINVAL; + + local_irq_save(flags); + + if (chan->client != client) { + printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", + channel, chan->client, client); + } + + /* sort out stopping and freeing the channel */ + + + chan->client = NULL; + chan->in_use = 0; + + if (!(channel & DMACH_LOW_LEVEL)) + s3c_dma_chan_map[channel] = NULL; + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(s3c2410_dma_free); + + +static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs) +{ + struct s3c2410_dma_chan *chan = dmac->channels + offs; + + /* note, we currently do not bother to work out which buffer + * or buffers have been completed since the last tc-irq. */ + + if (chan->callback_fn) + (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK); +} + +static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs) +{ + printk(KERN_DEBUG "%s: offs %d\n", __func__, offs); +} + +static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) +{ + struct s3c64xx_dmac *dmac = pw; + u32 tcstat, errstat; + u32 bit; + int offs; + + tcstat = readl(dmac->regs + PL080_TC_STATUS); + errstat = readl(dmac->regs + PL080_ERR_STATUS); + + for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { + if (tcstat & bit) { + writel(bit, dmac->regs + PL080_TC_CLEAR); + s3c64xx_dma_tcirq(dmac, offs); + } + + if (errstat & bit) { + s3c64xx_dma_errirq(dmac, offs); + writel(bit, dmac->regs + PL080_ERR_CLEAR); + } + } + + return IRQ_HANDLED; +} + +static struct sysdev_class dma_sysclass = { + .name = "s3c64xx-dma", +}; + +static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, + int irq, unsigned int base) +{ + struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno]; + struct s3c64xx_dmac *dmac; + char clkname[16]; + void __iomem *regs; + void __iomem *regptr; + int err, ch; + + dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL); + if (!dmac) { + printk(KERN_ERR "%s: failed to alloc mem\n", __func__); + return -ENOMEM; + } + + dmac->sysdev.id = chno / 8; + dmac->sysdev.cls = &dma_sysclass; + + err = sysdev_register(&dmac->sysdev); + if (err) { + printk(KERN_ERR "%s: failed to register sysdevice\n", __func__); + goto err_alloc; + } + + regs = ioremap(base, 0x200); + if (!regs) { + printk(KERN_ERR "%s: failed to ioremap()\n", __func__); + err = -ENXIO; + goto err_dev; + } + + snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id); + + dmac->clk = clk_get(NULL, clkname); + if (IS_ERR(dmac->clk)) { + printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname); + err = PTR_ERR(dmac->clk); + goto err_map; + } + + clk_enable(dmac->clk); + + dmac->regs = regs; + dmac->chanbase = chbase; + dmac->channels = chptr; + + err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac); + if (err < 0) { + printk(KERN_ERR "%s: failed to get irq\n", __func__); + goto err_clk; + } + + regptr = regs + PL080_Cx_BASE(0); + + for (ch = 0; ch < 8; ch++, chno++, chptr++) { + printk(KERN_INFO "%s: registering DMA %d (%p)\n", + __func__, chno, regptr); + + chptr->bit = 1 << ch; + chptr->number = chno; + chptr->dmac = dmac; + chptr->regs = regptr; + regptr += PL008_Cx_STRIDE; + } + + /* for the moment, permanently enable the controller */ + writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG); + + printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs); + + return 0; + +err_clk: + clk_disable(dmac->clk); + clk_put(dmac->clk); +err_map: + iounmap(regs); +err_dev: + sysdev_unregister(&dmac->sysdev); +err_alloc: + kfree(dmac); + return err; +} + +static int __init s3c64xx_dma_init(void) +{ + int ret; + + printk(KERN_INFO "%s: Registering DMA channels\n", __func__); + + dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0); + if (!dma_pool) { + printk(KERN_ERR "%s: failed to create pool\n", __func__); + return -ENOMEM; + } + + ret = sysdev_class_register(&dma_sysclass); + if (ret) { + printk(KERN_ERR "%s: failed to create sysclass\n", __func__); + return -ENOMEM; + } + + /* Set all DMA configuration to be DMA, not SDMA */ + writel(0xffffff, S3C_SYSREG(0x110)); + + /* Register standard DMA controlers */ + s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); + s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000); + + return 0; +} + +arch_initcall(s3c64xx_dma_init); diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index 78ee52cffc9e..da7b60ee5e67 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip) { chip->chip.direction_input = s3c64xx_gpiolib_4bit_input; chip->chip.direction_output = s3c64xx_gpiolib_4bit_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); } static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) { chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input; chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) +{ + chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); } static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, @@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void) s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), s3c64xx_gpiolib_add_4bit2); - s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL); + s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), + s3c64xx_gpiolib_add_2bit); return 0; } diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h new file mode 100644 index 000000000000..0c30dd986725 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h + * + * Copyright 2009 Openmoko, Inc. + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX DMA core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ + +struct s3c64xx_dma_buff; + +/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor + * @next: Pointer to next buffer in queue or ring. + * @pw: Client provided identifier + * @lli: Pointer to hardware descriptor this buffer is associated with. + * @lli_dma: Hardare address of the descriptor. + */ +struct s3c64xx_dma_buff { + struct s3c64xx_dma_buff *next; + + void *pw; + struct pl080_lli *lli; + dma_addr_t lli_dma; +}; + +struct s3c64xx_dmac; + +struct s3c2410_dma_chan { + unsigned char number; /* number of this dma channel */ + unsigned char in_use; /* channel allocated */ + unsigned char bit; /* bit for enable/disable/etc */ + unsigned char hw_width; + unsigned char peripheral; + + unsigned int flags; + enum s3c2410_dmasrc source; + + + dma_addr_t dev_addr; + + struct s3c2410_dma_client *client; + struct s3c64xx_dmac *dmac; /* pointer to controller */ + + void __iomem *regs; + + /* cdriver callbacks */ + s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ + s3c2410_dma_opfn_t op_fn; /* channel op callback */ + + /* buffer list and information */ + struct s3c64xx_dma_buff *curr; /* current dma buffer */ + struct s3c64xx_dma_buff *next; /* next buffer to load */ + struct s3c64xx_dma_buff *end; /* end of queue */ + + /* note, when channel is running in circular mode, curr is the + * first buffer enqueued, end is the last and curr is where the + * last buffer-done event is set-at. The buffers are not freed + * and the last buffer hardware descriptor points back to the + * first. + */ +}; + +#include <plat/dma-core.h> diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index f865bf4d709e..743a70094d04 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -157,6 +157,7 @@ #define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) #define IRQ_EINT(x) S3C_EINT(x) +#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0)) /* Next the external interrupt groups. These are similar to the IRQ_EINT(x) * that they are sourced from the GPIO pins but with a different scheme for diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h new file mode 100644 index 000000000000..d347de3ba0dc --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h @@ -0,0 +1,98 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <plat/regs-gpio.h> + +static inline void s3c_pm_debug_init_uart(void) +{ + u32 tmp = __raw_readl(S3C_PCLK_GATE); + + /* As a note, since the S3C64XX UARTs generally have multiple + * clock sources, we simply enable PCLK at the moment and hope + * that the resume settings for the UART are suitable for the + * use with PCLK. + */ + + tmp |= S3C_CLKCON_PCLK_UART0; + tmp |= S3C_CLKCON_PCLK_UART1; + tmp |= S3C_CLKCON_PCLK_UART2; + tmp |= S3C_CLKCON_PCLK_UART3; + + __raw_writel(tmp, S3C_PCLK_GATE); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + /* VIC should have already been taken care of */ + + /* clear any pending EINT0 interrupts */ + __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ +} + +/* make these defines, we currently do not have any need to change + * the IRQ wake controls depending on the CPU we are running on */ + +#define s3c_irqwake_eintallow ((1 << 28) - 1) +#define s3c_irqwake_intallow (0) + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + u32 ucon = __raw_readl(regs + S3C2410_UCON); + u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; + u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; + u32 new_ucon; + u32 delta; + + /* S3C64XX UART blocks only support level interrupts, so ensure that + * when we restore unused UART blocks we force the level interrupt + * settigs. */ + save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; + + /* We have a constraint on changing the clock type of the UART + * between UCLKx and PCLK, so ensure that when we restore UCON + * that the CLK field is correctly modified if the bootloader + * has changed anything. + */ + if (ucon_clk != save_clk) { + new_ucon = save->ucon; + delta = ucon_clk ^ save_clk; + + /* change from UCLKx => wrong PCLK, + * either UCLK can be tested for by a bit-test + * with UCLK0 */ + if (ucon_clk & S3C6400_UCON_UCLK0 && + !(save_clk & S3C6400_UCON_UCLK0) && + delta & S3C6400_UCON_PCLK2) { + new_ucon &= ~S3C6400_UCON_UCLK0; + } else if (delta == S3C6400_UCON_PCLK2) { + /* as an precaution, don't change from + * PCLK2 => PCLK or vice-versa */ + new_ucon ^= S3C6400_UCON_PCLK2; + } + + S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", + ucon, new_ucon, save->ucon); + save->ucon = new_ucon; + } +} diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h index b1082c163247..52836d41e333 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -32,6 +32,7 @@ #define S3C_HCLK_GATE S3C_CLKREG(0x30) #define S3C_PCLK_GATE S3C_CLKREG(0x34) #define S3C_SCLK_GATE S3C_CLKREG(0x38) +#define S3C_MEM0_GATE S3C_CLKREG(0x3C) /* CLKDIV0 */ #define S3C6400_CLKDIV0_MFC_MASK (0xf << 28) diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h index 571eaa2e54f1..11f2e1e119b0 100644 --- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h +++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h @@ -15,12 +15,13 @@ /* Common init code for S3C6400 related SoCs */ extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c6400_register_clocks(void); +extern void s3c6400_register_clocks(unsigned armclk_divlimit); extern void s3c6400_setup_clocks(void); #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); +extern void s3c6400_init_irq(void); extern void s3c6400_map_io(void); extern void s3c6400_init_clocks(int xtal); diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 47e5155bb13e..f81b7b818ba0 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/sysdev.h> #include <linux/gpio.h> #include <linux/irq.h> #include <linux/io.h> @@ -26,6 +27,7 @@ #include <mach/map.h> #include <plat/cpu.h> +#include <plat/pm.h> #define eint_offset(irq) ((irq) - IRQ_EINT(0)) #define eint_irq_to_bit(irq) (1 << eint_offset(irq)) @@ -134,6 +136,7 @@ static struct irq_chip s3c_irq_eint = { .mask_ack = s3c_irq_eint_maskack, .ack = s3c_irq_eint_ack, .set_type = s3c_irq_eint_set_type, + .set_wake = s3c_irqext_wake, }; /* s3c_irq_demux_eint diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c new file mode 100644 index 000000000000..ca523b5d4c17 --- /dev/null +++ b/arch/arm/plat-s3c64xx/irq-pm.c @@ -0,0 +1,111 @@ +/* arch/arm/plat-s3c64xx/irq-pm.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Interrupt handling Power Management + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/serial_core.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/map.h> + +#include <plat/regs-serial.h> +#include <plat/regs-timer.h> +#include <plat/regs-gpio.h> +#include <plat/cpu.h> +#include <plat/pm.h> + +/* We handled all the IRQ types in this code, to save having to make several + * small files to handle each different type separately. Having the EINT_GRP + * code here shouldn't be as much bloat as the IRQ table space needed when + * they are enabled. The added benefit is we ensure that these registers are + * in the same state as we suspended. + */ + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S3C64XX_PRIORITY), + SAVE_ITEM(S3C64XX_EINT0CON0), + SAVE_ITEM(S3C64XX_EINT0CON1), + SAVE_ITEM(S3C64XX_EINT0FLTCON0), + SAVE_ITEM(S3C64XX_EINT0FLTCON1), + SAVE_ITEM(S3C64XX_EINT0FLTCON2), + SAVE_ITEM(S3C64XX_EINT0FLTCON3), + SAVE_ITEM(S3C64XX_EINT0MASK), + SAVE_ITEM(S3C64XX_TINT_CSTAT), +}; + +static struct irq_grp_save { + u32 fltcon; + u32 con; + u32 mask; +} eint_grp_save[5]; + +static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; + +static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state) +{ + struct irq_grp_save *grp = eint_grp_save; + int i; + + S3C_PMDBG("%s: suspending IRQs\n", __func__); + + s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) + irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); + + for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { + grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4)); + grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4)); + grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4)); + } + + return 0; +} + +static int s3c64xx_irq_pm_resume(struct sys_device *dev) +{ + struct irq_grp_save *grp = eint_grp_save; + int i; + + S3C_PMDBG("%s: resuming IRQs\n", __func__); + + s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) + __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); + + for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { + __raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4)); + __raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4)); + __raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4)); + } + + S3C_PMDBG("%s: IRQ configuration restored\n", __func__); + return 0; +} + +static struct sysdev_driver s3c64xx_irq_driver = { + .suspend = s3c64xx_irq_pm_suspend, + .resume = s3c64xx_irq_pm_resume, +}; + +static int __init s3c64xx_irq_pm_init(void) +{ + return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver); +} + +arch_initcall(s3c64xx_irq_pm_init); + diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c index f22edf7c2d2d..8dc5b6da9789 100644 --- a/arch/arm/plat-s3c64xx/irq.c +++ b/arch/arm/plat-s3c64xx/irq.c @@ -14,12 +14,14 @@ #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/serial_core.h> #include <linux/irq.h> #include <linux/io.h> #include <asm/hardware/vic.h> #include <mach/map.h> +#include <plat/regs-serial.h> #include <plat/regs-timer.h> #include <plat/cpu.h> @@ -135,9 +137,6 @@ static inline unsigned int s3c_irq_uart_bit(unsigned int irq) } /* UART interrupt registers, not worth adding to seperate include header */ -#define S3C64XX_UINTP 0x30 -#define S3C64XX_UINTSP 0x34 -#define S3C64XX_UINTM 0x38 static void s3c_irq_uart_mask(unsigned int irq) { @@ -233,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); /* initialise the pair of VICs */ - vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid); - vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid); + vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0); + vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0); /* add the timer sub-irqs */ diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c new file mode 100644 index 000000000000..07a6516a4f3c --- /dev/null +++ b/arch/arm/plat-s3c64xx/pm.c @@ -0,0 +1,175 @@ +/* linux/arch/arm/plat-s3c64xx/pm.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX CPU PM support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <mach/map.h> + +#include <plat/pm.h> +#include <plat/regs-sys.h> +#include <plat/regs-gpio.h> +#include <plat/regs-clock.h> +#include <plat/regs-syscon-power.h> +#include <plat/regs-gpio-memport.h> + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK +#include <plat/gpio-bank-n.h> + +void s3c_pm_debug_smdkled(u32 set, u32 clear) +{ + unsigned long flags; + u32 reg; + + local_irq_save(flags); + reg = __raw_readl(S3C64XX_GPNCON); + reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | + S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)); + reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | + S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15); + __raw_writel(reg, S3C64XX_GPNCON); + + reg = __raw_readl(S3C64XX_GPNDAT); + reg &= ~(clear << 12); + reg |= set << 12; + __raw_writel(reg, S3C64XX_GPNDAT); + + local_irq_restore(flags); +} +#endif + +static struct sleep_save core_save[] = { + SAVE_ITEM(S3C_APLL_LOCK), + SAVE_ITEM(S3C_MPLL_LOCK), + SAVE_ITEM(S3C_EPLL_LOCK), + SAVE_ITEM(S3C_CLK_SRC), + SAVE_ITEM(S3C_CLK_DIV0), + SAVE_ITEM(S3C_CLK_DIV1), + SAVE_ITEM(S3C_CLK_DIV2), + SAVE_ITEM(S3C_CLK_OUT), + SAVE_ITEM(S3C_HCLK_GATE), + SAVE_ITEM(S3C_PCLK_GATE), + SAVE_ITEM(S3C_SCLK_GATE), + SAVE_ITEM(S3C_MEM0_GATE), + + SAVE_ITEM(S3C_EPLL_CON1), + SAVE_ITEM(S3C_EPLL_CON0), + + SAVE_ITEM(S3C64XX_MEM0DRVCON), + SAVE_ITEM(S3C64XX_MEM1DRVCON), + +#ifndef CONFIG_CPU_FREQ + SAVE_ITEM(S3C_APLL_CON), + SAVE_ITEM(S3C_MPLL_CON), +#endif +}; + +static struct sleep_save misc_save[] = { + SAVE_ITEM(S3C64XX_AHB_CON0), + SAVE_ITEM(S3C64XX_AHB_CON1), + SAVE_ITEM(S3C64XX_AHB_CON2), + + SAVE_ITEM(S3C64XX_SPCON), + + SAVE_ITEM(S3C64XX_MEM0CONSTOP), + SAVE_ITEM(S3C64XX_MEM1CONSTOP), + SAVE_ITEM(S3C64XX_MEM0CONSLP0), + SAVE_ITEM(S3C64XX_MEM0CONSLP1), + SAVE_ITEM(S3C64XX_MEM1CONSLP), +}; + +void s3c_pm_configure_extint(void) +{ + __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK); +} + +void s3c_pm_restore_core(void) +{ + __raw_writel(0, S3C64XX_EINT_MASK); + + s3c_pm_debug_smdkled(1 << 2, 0); + + s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); +} + +void s3c_pm_save_core(void) +{ + s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); + s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); +} + +/* since both s3c6400 and s3c6410 share the same sleep pm calls, we + * put the per-cpu code in here until any new cpu comes along and changes + * this. + */ + +#include <plat/regs-gpio.h> + +static void s3c64xx_cpu_suspend(void) +{ + unsigned long tmp; + + /* set our standby method to sleep */ + + tmp = __raw_readl(S3C64XX_PWR_CFG); + tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK; + tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP; + __raw_writel(tmp, S3C64XX_PWR_CFG); + + /* clear any old wakeup */ + + __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), + S3C64XX_WAKEUP_STAT); + + /* set the LED state to 0110 over sleep */ + s3c_pm_debug_smdkled(3 << 1, 0xf); + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); + + /* we should never get past here */ + + panic("sleep resumed to originator?"); +} + +static void s3c64xx_pm_prepare(void) +{ + /* store address of resume. */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0); + + /* ensure previous wakeup state is cleared before sleeping */ + __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT); +} + +static int s3c64xx_pm_init(void) +{ + pm_cpu_prep = s3c64xx_pm_prepare; + pm_cpu_sleep = s3c64xx_cpu_suspend; + pm_uart_udivslot = 1; + return 0; +} + +arch_initcall(s3c64xx_pm_init); diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 05b17528041e..1debc1f9f987 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -133,6 +133,65 @@ static struct clksrc_clk clk_mout_mpll = { .sources = &clk_src_mpll, }; +static unsigned int armclk_mask; + +static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv; + + /* divisor mask starts at bit0, so no need to shift */ + clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; + + return rate / (clkdiv + 1); +} + +static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + u32 div; + + if (parent < rate) + return rate; + + div = (parent / rate) - 1; + if (div > armclk_mask) + div = armclk_mask; + + return parent / (div + 1); +} + +static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + u32 div; + u32 val; + + if (rate < parent / (armclk_mask + 1)) + return -EINVAL; + + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; + + val = __raw_readl(S3C_CLK_DIV0); + val &= armclk_mask; + val |= (div - 1); + __raw_writel(val, S3C_CLK_DIV0); + + return 0; + +} + +static struct clk clk_arm = { + .name = "armclk", + .id = -1, + .parent = &clk_mout_apll.clk, + .get_rate = s3c64xx_clk_arm_get_rate, + .set_rate = s3c64xx_clk_arm_set_rate, + .round_rate = s3c64xx_clk_arm_round_rate, +}; + static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) { unsigned long rate = clk_get_rate(clk->parent); @@ -520,6 +579,33 @@ static struct clksrc_clk clk_irda = { .reg_divider = S3C_CLK_DIV2, }; +static struct clk *clkset_camif_list[] = { + &clk_h2, +}; + +static struct clk_sources clkset_camif = { + .sources = clkset_camif_list, + .nr_sources = ARRAY_SIZE(clkset_camif_list), +}; + +static struct clksrc_clk clk_camif = { + .clk = { + .name = "camera", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_CAM, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = 0, + .mask = 0, + .sources = &clkset_camif, + .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT, + .reg_divider = S3C_CLK_DIV0, +}; + /* Clock initialisation code */ static struct clksrc_clk *init_parents[] = { @@ -536,6 +622,7 @@ static struct clksrc_clk *init_parents[] = { &clk_audio0, &clk_audio1, &clk_irda, + &clk_camif, }; static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk) @@ -608,6 +695,7 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) clk_fout_epll.rate = epll; clk_fout_apll.rate = apll; + clk_h2.rate = hclk2; clk_h.rate = hclk; clk_p.rate = pclk; clk_f.rate = fclk; @@ -635,14 +723,30 @@ static struct clk *clks[] __initdata = { &clk_audio0.clk, &clk_audio1.clk, &clk_irda.clk, + &clk_camif.clk, + &clk_arm, }; -void __init s3c6400_register_clocks(void) +/** + * s3c6400_register_clocks - register clocks for s3c6400 and above + * @armclk_divlimit: Divisor mask for ARMCLK + * + * Register the clocks for the S3C6400 and above SoC range, such + * as ARMCLK and the clocks which have divider chains attached. + * + * This call does not setup the clocks, which is left to the + * s3c6400_setup_clocks() call which may be needed by the cpufreq + * or resume code to re-set the clocks if the bootloader has changed + * them. + */ +void __init s3c6400_register_clocks(unsigned armclk_divlimit) { struct clk *clkp; int ret; int ptr; + armclk_mask = armclk_divlimit; + for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { clkp = clks[ptr]; ret = s3c24xx_register_clock(clkp); diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c new file mode 100644 index 000000000000..5417123b0ac1 --- /dev/null +++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c @@ -0,0 +1,55 @@ +/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/gpio.h> +#include <plat/gpio-cfg.h> + +void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S3C64XX_GPG(2 + width); + + /* Set all the necessary GPG pins to special-function 0 */ + for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2)); +} + +void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S3C64XX_GPH(2 + width); + + /* Set all the necessary GPG pins to special-function 0 */ + for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3)); +} diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S new file mode 100644 index 000000000000..8e71fe90a373 --- /dev/null +++ b/arch/arm/plat-s3c64xx/sleep.S @@ -0,0 +1,144 @@ +/* linux/0arch/arm/plat-s3c64xx/sleep.S + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX CPU sleep code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/map.h> + +#undef S3C64XX_VA_GPIO +#define S3C64XX_VA_GPIO (0x0) + +#include <plat/regs-gpio.h> +#include <plat/gpio-bank-n.h> + +#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) + + .text + + /* s3c_cpu_save + * + * Save enough processor state to allow the restart of the pm.c + * code after resume. + * + * entry: + * r0 = pointer to the save block + */ + +ENTRY(s3c_cpu_save) + stmfd sp!, { r4 - r12, lr } + + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control + mrc p15, 0, r9, c1, c0, 0 @ Control register + mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls + + stmia r0, { r4 - r13 } @ Save CP registers and SP + + @@ save our state to ram + bl s3c_pm_cb_flushcache + + @@ call final suspend code + ldr r0, =pm_cpu_sleep + ldr pc, [r0] + + @@ return to the caller, after the MMU is turned on. + @@ restore the last bits of the stack and return. +resume_with_mmu: + ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save + + .data + + /* the next bit is code, but it requires easy access to the + * s3c_sleep_save_phys data before the MMU is switched on, so + * we store the code that needs this variable in the .data where + * the value can be written to (the .text segment is RO). + */ + + .global s3c_sleep_save_phys +s3c_sleep_save_phys: + .word 0 + + /* Sleep magic, the word before the resume entry point so that the + * bootloader can check for a resumeable image. */ + + .word 0x2bedf00d + + /* s3c_cpu_reusme + * + * This is the entry point, stored by whatever method the bootloader + * requires to get the kernel runnign again. This code expects to be + * entered with no caches live and the MMU disabled. It will then + * restore the MMU and other basic CP registers saved and restart + * the kernel C code to finish the resume code. + */ + +ENTRY(s3c_cpu_resume) + msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE + ldr r2, =LL_UART /* for debug */ + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + /* Initialise the GPIO state if we are debugging via the SMDK LEDs, + * as the uboot version supplied resets these to inputs during the + * resume checks. + */ + + ldr r3, =S3C64XX_PA_GPIO + ldr r0, [ r3, #S3C64XX_GPNCON ] + bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \ + S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)) + orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \ + S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15)) + str r0, [ r3, #S3C64XX_GPNCON ] + + ldr r0, [ r3, #S3C64XX_GPNDAT ] + bic r0, r0, #0xf << 12 @ GPN12..15 + orr r0, r0, #1 << 15 @ GPN15 + str r0, [ r3, #S3C64XX_GPNDAT ] +#endif + + /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches + * are thoroughly cleaned just in case the bootloader didn't do it + * for us. */ + mov r0, #0 + mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs + @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches + + ldr r0, s3c_sleep_save_phys + ldmia r0, { r4 - r13 } + + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + + mov r0, #0 @ restore copro access controls + mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls + mcr p15, 0, r0, c7, c5, 4 + + ldr r2, =resume_with_mmu + mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */ + nop + mov pc, r2 /* jump back */ + + .end diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig new file mode 100644 index 000000000000..2cf37c35951b --- /dev/null +++ b/arch/arm/plat-stmp3xxx/Kconfig @@ -0,0 +1,37 @@ +if ARCH_STMP3XXX + +menu "Freescale STMP3xxx implementations" + +choice + prompt "Select STMP3xxx chip family" + +config ARCH_STMP37XX + bool "Freescale SMTP37xx" + select CPU_ARM926T + ---help--- + STMP37xx refers to 3700 through 3769 chips + +config ARCH_STMP378X + bool "Freescale STMP378x" + select CPU_ARM926T + ---help--- + STMP378x refers to 3780 through 3789 chips + +endchoice + +choice + prompt "Select STMP3xxx board type" + +config MACH_STMP37XX + depends on ARCH_STMP37XX + bool "Freescale STMP37xx development board" + +config MACH_STMP378X + depends on ARCH_STMP378X + bool "Freescale STMP378x development board" + +endchoice + +endmenu + +endif diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile new file mode 100644 index 000000000000..31dd518f37a5 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# +# Object file lists. +obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c new file mode 100644 index 000000000000..5d2f19a09e44 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/clock.c @@ -0,0 +1,1135 @@ +/* + * Clock manipulation routines for Freescale STMP37XX/STMP378X + * + * Author: Vitaly Wool <vital@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#define DEBUG +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <asm/mach-types.h> +#include <asm/clkdev.h> +#include <mach/platform.h> +#include <mach/regs-clkctrl.h> + +#include "clock.h" + +static DEFINE_SPINLOCK(clocks_lock); + +static struct clk osc_24M; +static struct clk pll_clk; +static struct clk cpu_clk; +static struct clk hclk; + +static int propagate_rate(struct clk *); + +static inline int clk_is_busy(struct clk *clk) +{ + return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit); +} + +static inline int clk_good(struct clk *clk) +{ + return clk && !IS_ERR(clk) && clk->ops; +} + +static int std_clk_enable(struct clk *clk) +{ + if (clk->enable_reg) { + u32 clk_reg = __raw_readl(clk->enable_reg); + if (clk->enable_negate) + clk_reg &= ~(1 << clk->enable_shift); + else + clk_reg |= (1 << clk->enable_shift); + __raw_writel(clk_reg, clk->enable_reg); + if (clk->enable_wait) + udelay(clk->enable_wait); + return 0; + } else + return -EINVAL; +} + +static int std_clk_disable(struct clk *clk) +{ + if (clk->enable_reg) { + u32 clk_reg = __raw_readl(clk->enable_reg); + if (clk->enable_negate) + clk_reg |= (1 << clk->enable_shift); + else + clk_reg &= ~(1 << clk->enable_shift); + __raw_writel(clk_reg, clk->enable_reg); + return 0; + } else + return -EINVAL; +} + +static int io_set_rate(struct clk *clk, u32 rate) +{ + u32 reg_frac, clkctrl_frac; + int i, ret = 0, mask = 0x1f; + + clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate; + + if (clkctrl_frac < 18 || clkctrl_frac > 35) { + ret = -EINVAL; + goto out; + } + + reg_frac = __raw_readl(clk->scale_reg); + reg_frac &= ~(mask << clk->scale_shift); + __raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift), + clk->scale_reg); + if (clk->busy_reg) { + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) + ret = -ETIMEDOUT; + else + ret = 0; + } +out: + return ret; +} + +static long io_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + int mask = 0x1f; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + clk->rate = rate; + + return rate; +} + +static long per_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + long div; + const int mask = 0xff; + + if (clk->enable_reg && + !(__raw_readl(clk->enable_reg) & clk->enable_shift)) + clk->rate = 0; + else { + div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + if (div) + rate /= div; + clk->rate = rate; + } + + return clk->rate; +} + +static int per_set_rate(struct clk *clk, u32 rate) +{ + int ret = -EINVAL; + int div = (clk->parent->rate + rate - 1) / rate; + u32 reg_frac; + const int mask = 0xff; + int try = 10; + int i = -1; + + if (div == 0 || div > mask) + goto out; + + reg_frac = __raw_readl(clk->scale_reg); + reg_frac &= ~(mask << clk->scale_shift); + + while (try--) { + __raw_writel(reg_frac | (div << clk->scale_shift), + clk->scale_reg); + + if (clk->busy_reg) { + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + } + if (i) + break; + } + + if (!i) + ret = -ETIMEDOUT; + else + ret = 0; + +out: + if (ret != 0) + printk(KERN_ERR "%s: error %d\n", __func__, ret); + return ret; +} + +static long lcdif_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + long div; + const int mask = 0xff; + + div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + if (div) { + rate /= div; + div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) & + BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC; + rate /= div; + } + clk->rate = rate; + + return rate; +} + +static int lcdif_set_rate(struct clk *clk, u32 rate) +{ + int ret = 0; + /* + * On 3700, we can get most timings exact by modifying ref_pix + * and the divider, but keeping the phase timings at 1 (2 + * phases per cycle). + * + * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz, + * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns. + * + * ns_cycle >= 2*18e3/(18*480) = 25/6 + * ns_cycle <= 2*35e3/(18*480) = 875/108 + * + * Multiply the ns_cycle by 'div' to lengthen it until it fits the + * bounds. This is the divider we'll use after ref_pix. + * + * 6 * ns_cycle >= 25 * div + * 108 * ns_cycle <= 875 * div + */ + u32 ns_cycle = 1000000 / rate; + u32 div, reg_val; + u32 lowest_result = (u32) -1; + u32 lowest_div = 0, lowest_fracdiv = 0; + + for (div = 1; div < 256; ++div) { + u32 fracdiv; + u32 ps_result; + int lower_bound = 6 * ns_cycle >= 25 * div; + int upper_bound = 108 * ns_cycle <= 875 * div; + if (!lower_bound) + break; + if (!upper_bound) + continue; + /* + * Found a matching div. Calculate fractional divider needed, + * rounded up. + */ + fracdiv = ((clk->parent->rate / 1000 * 18 / 2) * + ns_cycle + 1000 * div - 1) / + (1000 * div); + if (fracdiv < 18 || fracdiv > 35) { + ret = -EINVAL; + goto out; + } + /* Calculate the actual cycle time this results in */ + ps_result = 6250 * div * fracdiv / 27; + + /* Use the fastest result that doesn't break ns_cycle */ + if (ps_result <= lowest_result) { + lowest_result = ps_result; + lowest_div = div; + lowest_fracdiv = fracdiv; + } + } + + if (div >= 256 || lowest_result == (u32) -1) { + ret = -EINVAL; + goto out; + } + pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz " + "PIXCLK=%uMHz cycle=%u.%03uns\n", + lowest_fracdiv, lowest_div, + 480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div, + lowest_result / 1000, lowest_result % 1000); + + /* Program ref_pix phase fractional divider */ + reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC); + reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC; + reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC); + __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC); + + /* Ungate PFD */ + stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX, + REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC); + + /* Program pix divider */ + reg_val = __raw_readl(clk->scale_reg); + reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE); + reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV); + __raw_writel(reg_val, clk->scale_reg); + + /* Wait for divider update */ + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + ret = -ETIMEDOUT; + goto out; + } + } + + /* Switch to ref_pix source */ + reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ); + reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX; + __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ); + +out: + return ret; +} + + +static int cpu_set_rate(struct clk *clk, u32 rate) +{ + u32 reg_val; + + if (rate < 24000) + return -EINVAL; + else if (rate == 24000) { + /* switch to the 24M source */ + clk_set_parent(clk, &osc_24M); + } else { + int i; + u32 clkctrl_cpu = 1; + u32 c = clkctrl_cpu; + u32 clkctrl_frac = 1; + u32 val; + for ( ; c < 0x40; c++) { + u32 f = (pll_clk.rate*18/c + rate/2) / rate; + int s1, s2; + + if (f < 18 || f > 35) + continue; + s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate; + s2 = pll_clk.rate*18/c/f - rate; + pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2); + if (abs(s1) > abs(s2)) { + clkctrl_cpu = c; + clkctrl_frac = f; + } + if (s2 == 0) + break; + }; + pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__, + clkctrl_cpu, clkctrl_frac); + if (c == 0x40) { + int d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - + rate; + if (abs(d) > 100 || + clkctrl_frac < 18 || clkctrl_frac > 35) + return -EINVAL; + } + + /* 4.6.2 */ + val = __raw_readl(clk->scale_reg); + val &= ~(0x3f << clk->scale_shift); + val |= clkctrl_frac; + clk_set_parent(clk, &osc_24M); + udelay(10); + __raw_writel(val, clk->scale_reg); + /* ungate */ + __raw_writel(1<<7, clk->scale_reg + 8); + /* write clkctrl_cpu */ + clk->saved_div = clkctrl_cpu; + + reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU); + reg_val &= ~0x3F; + reg_val |= clkctrl_cpu; + __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU); + + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up CPU divisor\n"); + return -ETIMEDOUT; + } + clk_set_parent(clk, &pll_clk); + clk->saved_div = 0; + udelay(10); + } + return 0; +} + +static long cpu_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f; + rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f; + rate = ((rate + 9) / 10) * 10; + clk->rate = rate; + + return rate; +} + +static long cpu_round_rate(struct clk *clk, u32 rate) +{ + unsigned long r = 0; + + if (rate <= 24000) + r = 24000; + else { + u32 clkctrl_cpu = 1; + u32 clkctrl_frac; + do { + clkctrl_frac = + (pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate; + if (clkctrl_frac > 35) + continue; + if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 == + rate / 10) + break; + } while (pll_clk.rate / 2 >= clkctrl_cpu++ * rate); + if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate) + clkctrl_cpu--; + pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__, + clkctrl_cpu, clkctrl_frac); + if (clkctrl_frac < 18) + clkctrl_frac = 18; + if (clkctrl_frac > 35) + clkctrl_frac = 35; + + r = pll_clk.rate * 18; + r /= clkctrl_frac; + r /= clkctrl_cpu; + r = 10 * ((r + 9) / 10); + } + return r; +} + +static long emi_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f; + rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f; + clk->rate = rate; + + return rate; +} + +static int clkseq_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -EINVAL; + int shift = 8; + + /* bypass? */ + if (parent == &osc_24M) + shift = 4; + + if (clk->bypass_reg) { +#ifdef CONFIG_ARCH_STMP378X + u32 hbus_val, cpu_val; + + if (clk == &cpu_clk && shift == 4) { + hbus_val = __raw_readl(REGS_CLKCTRL_BASE + + HW_CLKCTRL_HBUS); + cpu_val = __raw_readl(REGS_CLKCTRL_BASE + + HW_CLKCTRL_CPU); + + hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN | + BM_CLKCTRL_HBUS_DIV); + clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU; + cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU; + cpu_val |= 1; + + if (machine_is_stmp378x()) { + __raw_writel(hbus_val, + REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS); + __raw_writel(cpu_val, + REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU); + hclk.rate = 0; + } + } else if (clk == &cpu_clk && shift == 8) { + hbus_val = __raw_readl(REGS_CLKCTRL_BASE + + HW_CLKCTRL_HBUS); + cpu_val = __raw_readl(REGS_CLKCTRL_BASE + + HW_CLKCTRL_CPU); + hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN | + BM_CLKCTRL_HBUS_DIV); + hbus_val |= 2; + cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU; + if (clk->saved_div) + cpu_val |= clk->saved_div; + else + cpu_val |= 2; + + if (machine_is_stmp378x()) { + __raw_writel(hbus_val, + REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS); + __raw_writel(cpu_val, + REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU); + hclk.rate = 0; + } + } +#endif + __raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift); + + ret = 0; + } + + return ret; +} + +static int hbus_set_rate(struct clk *clk, u32 rate) +{ + u8 div = 0; + int is_frac = 0; + u32 clkctrl_hbus; + struct clk *parent = clk->parent; + + pr_debug("%s: rate %d, parent rate %d\n", __func__, rate, + parent->rate); + + if (rate > parent->rate) + return -EINVAL; + + if (((parent->rate + rate/2) / rate) * rate != parent->rate && + parent->rate / rate < 32) { + pr_debug("%s: switching to fractional mode\n", __func__); + is_frac = 1; + } + + if (is_frac) + div = (32 * rate + parent->rate / 2) / parent->rate; + else + div = (parent->rate + rate - 1) / rate; + pr_debug("%s: div calculated is %d\n", __func__, div); + if (!div || div > 0x1f) + return -EINVAL; + + clk_set_parent(&cpu_clk, &osc_24M); + udelay(10); + clkctrl_hbus = __raw_readl(clk->scale_reg); + clkctrl_hbus &= ~0x3f; + clkctrl_hbus |= div; + clkctrl_hbus |= (is_frac << 5); + + __raw_writel(clkctrl_hbus, clk->scale_reg); + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up CPU divisor\n"); + return -ETIMEDOUT; + } + } + clk_set_parent(&cpu_clk, &pll_clk); + __raw_writel(clkctrl_hbus, clk->scale_reg); + udelay(10); + return 0; +} + +static long hbus_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + + if (__raw_readl(clk->scale_reg) & 0x20) { + rate *= __raw_readl(clk->scale_reg) & 0x1f; + rate /= 32; + } else + rate /= __raw_readl(clk->scale_reg) & 0x1f; + clk->rate = rate; + + return rate; +} + +static int xbus_set_rate(struct clk *clk, u32 rate) +{ + u16 div = 0; + u32 clkctrl_xbus; + + pr_debug("%s: rate %d, parent rate %d\n", __func__, rate, + clk->parent->rate); + + div = (clk->parent->rate + rate - 1) / rate; + pr_debug("%s: div calculated is %d\n", __func__, div); + if (!div || div > 0x3ff) + return -EINVAL; + + clkctrl_xbus = __raw_readl(clk->scale_reg); + clkctrl_xbus &= ~0x3ff; + clkctrl_xbus |= div; + __raw_writel(clkctrl_xbus, clk->scale_reg); + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up xbus divisor\n"); + return -ETIMEDOUT; + } + } + return 0; +} + +static long xbus_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + + rate /= __raw_readl(clk->scale_reg) & 0x3ff; + clk->rate = rate; + + return rate; +} + + +/* Clock ops */ + +static struct clk_ops std_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = per_get_rate, + .set_rate = per_set_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops min_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, +}; + +static struct clk_ops cpu_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = cpu_get_rate, + .set_rate = cpu_set_rate, + .round_rate = cpu_round_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops io_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = io_get_rate, + .set_rate = io_set_rate, +}; + +static struct clk_ops hbus_ops = { + .get_rate = hbus_get_rate, + .set_rate = hbus_set_rate, +}; + +static struct clk_ops xbus_ops = { + .get_rate = xbus_get_rate, + .set_rate = xbus_set_rate, +}; + +static struct clk_ops lcdif_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = lcdif_get_rate, + .set_rate = lcdif_set_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops emi_ops = { + .get_rate = emi_get_rate, +}; + +/* List of on-chip clocks */ + +static struct clk osc_24M = { + .flags = FIXED_RATE | ENABLED, + .rate = 24000, +}; + +static struct clk pll_clk = { + .parent = &osc_24M, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0, + .enable_shift = 16, + .enable_wait = 10, + .flags = FIXED_RATE | ENABLED, + .rate = 480000, + .ops = &min_ops, +}; + +static struct clk cpu_clk = { + .parent = &pll_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC, + .scale_shift = 0, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 7, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU, + .busy_bit = 28, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &cpu_ops, +}; + +static struct clk io_clk = { + .parent = &pll_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC, + .enable_shift = 31, + .enable_negate = 1, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC, + .scale_shift = 24, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &io_ops, +}; + +static struct clk hclk = { + .parent = &cpu_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 7, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS, + .busy_bit = 29, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &hbus_ops, +}; + +static struct clk xclk = { + .parent = &osc_24M, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS, + .busy_bit = 31, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &xbus_ops, +}; + +static struct clk uart_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 31, + .enable_negate = 1, + .flags = ENABLED, + .ops = &min_ops, +}; + +static struct clk audio_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 30, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk pwm_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 29, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk dri_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 28, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk digctl_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 27, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk timer_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 26, + .enable_negate = 1, + .flags = ENABLED, + .ops = &min_ops, +}; + +static struct clk lcdif_clk = { + .parent = &pll_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX, + .busy_bit = 29, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 1, + .flags = NEEDS_SET_PARENT, + .ops = &lcdif_ops, +}; + +static struct clk ssp_clk = { + .parent = &io_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP, + .busy_bit = 29, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP, + .enable_shift = 31, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 5, + .enable_negate = 1, + .flags = NEEDS_SET_PARENT, + .ops = &std_ops, +}; + +static struct clk gpmi_clk = { + .parent = &io_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI, + .busy_bit = 29, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 4, + .flags = NEEDS_SET_PARENT, + .ops = &std_ops, +}; + +static struct clk spdif_clk = { + .parent = &pll_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF, + .enable_shift = 31, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk emi_clk = { + .parent = &pll_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI, + .enable_shift = 31, + .enable_negate = 1, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC, + .scale_shift = 8, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI, + .busy_bit = 28, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 6, + .flags = ENABLED, + .ops = &emi_ops, +}; + +static struct clk ir_clk = { + .parent = &io_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_IR, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 3, + .ops = &min_ops, +}; + +static struct clk saif_clk = { + .parent = &pll_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF, + .busy_bit = 29, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 0, + .ops = &std_ops, +}; + +static struct clk usb_clk = { + .parent = &pll_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0, + .enable_shift = 18, + .enable_negate = 1, + .ops = &min_ops, +}; + +/* list of all the clocks */ +static struct clk_lookup onchip_clks[] = { + { + .con_id = "osc_24M", + .clk = &osc_24M, + }, { + .con_id = "pll", + .clk = &pll_clk, + }, { + .con_id = "cpu", + .clk = &cpu_clk, + }, { + .con_id = "hclk", + .clk = &hclk, + }, { + .con_id = "xclk", + .clk = &xclk, + }, { + .con_id = "io", + .clk = &io_clk, + }, { + .con_id = "uart", + .clk = &uart_clk, + }, { + .con_id = "audio", + .clk = &audio_clk, + }, { + .con_id = "pwm", + .clk = &pwm_clk, + }, { + .con_id = "dri", + .clk = &dri_clk, + }, { + .con_id = "digctl", + .clk = &digctl_clk, + }, { + .con_id = "timer", + .clk = &timer_clk, + }, { + .con_id = "lcdif", + .clk = &lcdif_clk, + }, { + .con_id = "ssp", + .clk = &ssp_clk, + }, { + .con_id = "gpmi", + .clk = &gpmi_clk, + }, { + .con_id = "spdif", + .clk = &spdif_clk, + }, { + .con_id = "emi", + .clk = &emi_clk, + }, { + .con_id = "ir", + .clk = &ir_clk, + }, { + .con_id = "saif", + .clk = &saif_clk, + }, { + .con_id = "usb", + .clk = &usb_clk, + }, +}; + +static int __init propagate_rate(struct clk *clk) +{ + struct clk_lookup *cl; + + for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks); + cl++) { + if (unlikely(!clk_good(cl->clk))) + continue; + if (cl->clk->parent == clk && cl->clk->ops->get_rate) { + cl->clk->ops->get_rate(cl->clk); + if (cl->clk->flags & RATE_PROPAGATES) + propagate_rate(cl->clk); + } + } + + return 0; +} + +/* Exported API */ +unsigned long clk_get_rate(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->ops->get_rate != NULL) + return clk->ops->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(!clk_good(clk))) + return 0; + + if (clk->ops->round_rate) + return clk->ops->round_rate(clk, rate); + + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +static inline int close_enough(long rate1, long rate2) +{ + return rate1 && !((rate2 - rate1) * 1000 / rate1); +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + if (unlikely(!clk_good(clk))) + goto out; + + if (clk->flags & FIXED_RATE || !clk->ops->set_rate) + goto out; + + else if (!close_enough(clk->rate, rate)) { + ret = clk->ops->set_rate(clk, rate); + if (ret < 0) + goto out; + clk->rate = rate; + if (clk->flags & RATE_PROPAGATES) + propagate_rate(clk); + } else + ret = 0; + +out: + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_enable(struct clk *clk) +{ + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + return -EINVAL; + + if (clk->parent) + clk_enable(clk->parent); + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + clk->usage++; + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +static void local_clk_disable(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return; + + if (clk->usage == 0 && clk->ops->disable) + clk->ops->disable(clk); + + if (clk->parent) + local_clk_disable(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + return; + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + if ((--clk->usage) == 0 && clk->ops->disable) + clk->ops->disable(clk); + + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + if (clk->parent) + clk_disable(clk->parent); +} +EXPORT_SYMBOL(clk_disable); + +/* Some additional API */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -ENODEV; + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + goto out; + + if (!clk->ops->set_parent) + goto out; + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + ret = clk->ops->set_parent(clk, parent); + if (!ret) { + /* disable if usage count is 0 */ + local_clk_disable(parent); + + parent->usage += clk->usage; + clk->parent->usage -= clk->usage; + + /* disable if new usage count is 0 */ + local_clk_disable(clk->parent); + + clk->parent = parent; + } + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + +out: + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return NULL; + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +static int __init clk_init(void) +{ + struct clk_lookup *cl; + struct clk_ops *ops; + + spin_lock_init(&clocks_lock); + + for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks); + cl++) { + if (cl->clk->flags & ENABLED) + clk_enable(cl->clk); + else + local_clk_disable(cl->clk); + + ops = cl->clk->ops; + + if ((cl->clk->flags & NEEDS_INITIALIZATION) && + ops && ops->set_rate) + ops->set_rate(cl->clk, cl->clk->rate); + + if (cl->clk->flags & FIXED_RATE) { + if (cl->clk->flags & RATE_PROPAGATES) + propagate_rate(cl->clk); + } else { + if (ops && ops->get_rate) + ops->get_rate(cl->clk); + } + + if (cl->clk->flags & NEEDS_SET_PARENT) { + if (ops && ops->set_parent) + ops->set_parent(cl->clk, cl->clk->parent); + } + + clkdev_add(cl); + } + return 0; +} + +arch_initcall(clk_init); diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h new file mode 100644 index 000000000000..a6611e1a3510 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/clock.h @@ -0,0 +1,61 @@ +/* + * Clock control driver for Freescale STMP37XX/STMP378X - internal header file + * + * Author: Vitaly Wool <vital@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__ +#define __ARCH_ARM_STMX3XXX_CLOCK_H__ + +#ifndef __ASSEMBLER__ + +struct clk_ops { + int (*enable) (struct clk *); + int (*disable) (struct clk *); + long (*get_rate) (struct clk *); + long (*round_rate) (struct clk *, u32); + int (*set_rate) (struct clk *, u32); + int (*set_parent) (struct clk *, struct clk *); +}; + +struct clk { + struct clk *parent; + u32 rate; + u32 flags; + u8 scale_shift; + u8 enable_shift; + u8 bypass_shift; + u8 busy_bit; + s8 usage; + int enable_wait; + int enable_negate; + u32 saved_div; + void __iomem *enable_reg; + void __iomem *scale_reg; + void __iomem *bypass_reg; + void __iomem *busy_reg; + struct clk_ops *ops; +}; + +#endif /* __ASSEMBLER__ */ + +/* Flags */ +#define RATE_PROPAGATES (1<<0) +#define NEEDS_INITIALIZATION (1<<1) +#define PARENT_SET_RATE (1<<2) +#define FIXED_RATE (1<<3) +#define ENABLED (1<<4) +#define NEEDS_SET_PARENT (1<<5) + +#endif diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c new file mode 100644 index 000000000000..37b8a09148a4 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/core.c @@ -0,0 +1,128 @@ +/* + * Freescale STMP37XX/STMP378X core routines + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <mach/stmp3xxx.h> +#include <mach/platform.h> +#include <mach/dma.h> +#include <mach/regs-clkctrl.h> + +static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable) +{ + u32 c; + int timeout; + + /* the process of software reset of IP block is done + in several steps: + + - clear SFTRST and wait for block is enabled; + - clear clock gating (CLKGATE bit); + - set the SFTRST again and wait for block is in reset; + - clear SFTRST and wait for reset completion. + */ + c = __raw_readl(hwreg); + c &= ~(1<<31); /* clear SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<31)) == 0) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when enabling\n", + __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<30); /* clear CLKGATE */ + __raw_writel(c, hwreg); + + if (!just_enable) { + c = __raw_readl(hwreg); + c |= (1<<31); /* now again set SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* poll until CLKGATE set */ + if (__raw_readl(hwreg) & (1<<30)) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when resetting\n", + __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<31); /* clear SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<31)) == 0) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when enabling " + "after reset\n", __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<30); /* clear CLKGATE */ + __raw_writel(c, hwreg); + } + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<30)) == 0) + break; + + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when unclockgating\n", + __func__, hwreg); + return -ETIME; + } + + return 0; +} + +int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable) +{ + int try = 10; + int r; + + while (try--) { + r = __stmp3xxx_reset_block(hwreg, just_enable); + if (!r) + break; + pr_debug("%s: try %d failed\n", __func__, 10 - try); + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_reset_block); + +struct platform_device stmp3xxx_dbguart = { + .name = "stmp3xxx-dbguart", + .id = -1, +}; + +void __init stmp3xxx_init(void) +{ + /* Turn off auto-slow and other tricks */ + stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS); + + stmp3xxx_dma_init(); +} diff --git a/arch/arm/plat-stmp3xxx/devices.c b/arch/arm/plat-stmp3xxx/devices.c new file mode 100644 index 000000000000..68fed4b8746a --- /dev/null +++ b/arch/arm/plat-stmp3xxx/devices.c @@ -0,0 +1,389 @@ +/* +* Freescale STMP37XX/STMP378X platform devices +* +* Embedded Alley Solutions, Inc <source@embeddedalley.com> +* +* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. +* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. +*/ + +/* +* The code contained herein is licensed under the GNU General Public +* License. You may obtain a copy of the GNU General Public License +* Version 2 or later at the following locations: +* +* http://www.opensource.org/licenses/gpl-license.html +* http://www.gnu.org/copyleft/gpl.html +*/ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/platform.h> +#include <mach/stmp3xxx.h> +#include <mach/regs-lcdif.h> +#include <mach/regs-uartapp.h> +#include <mach/regs-gpmi.h> +#include <mach/regs-usbctrl.h> +#include <mach/regs-ssp.h> +#include <mach/regs-rtc.h> + +static u64 common_dmamask = DMA_BIT_MASK(32); + +static struct resource appuart_resources[] = { + { + .start = IRQ_UARTAPP_INTERNAL, + .end = IRQ_UARTAPP_INTERNAL, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_UARTAPP_RX_DMA, + .end = IRQ_UARTAPP_RX_DMA, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_UARTAPP_TX_DMA, + .end = IRQ_UARTAPP_TX_DMA, + .flags = IORESOURCE_IRQ, + }, { + .start = REGS_UARTAPP1_PHYS, + .end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE, + .flags = IORESOURCE_MEM, + }, { + /* Rx DMA channel */ + .start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX), + .end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX), + .flags = IORESOURCE_DMA, + }, { + /* Tx DMA channel */ + .start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX), + .end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX), + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device stmp3xxx_appuart = { + .name = "stmp3xxx-appuart", + .id = 0, + .resource = appuart_resources, + .num_resources = ARRAY_SIZE(appuart_resources), + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device stmp3xxx_watchdog = { + .name = "stmp3xxx_wdt", + .id = -1, +}; + +static struct resource ts_resource[] = { + { + .flags = IORESOURCE_IRQ, + .start = IRQ_TOUCH_DETECT, + .end = IRQ_TOUCH_DETECT, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_LRADC_CH5, + .end = IRQ_LRADC_CH5, + }, +}; + +struct platform_device stmp3xxx_touchscreen = { + .name = "stmp3xxx_ts", + .id = -1, + .resource = ts_resource, + .num_resources = ARRAY_SIZE(ts_resource), +}; + +/* +* Keypad device +*/ +struct platform_device stmp3xxx_keyboard = { + .name = "stmp3xxx-keyboard", + .id = -1, +}; + +static struct resource gpmi_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = REGS_GPMI_PHYS, + .end = REGS_GPMI_PHYS + REGS_GPMI_SIZE, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_GPMI_DMA, + .end = IRQ_GPMI_DMA, + }, { + .flags = IORESOURCE_DMA, + .start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH), + .end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH), + }, +}; + +struct platform_device stmp3xxx_gpmi = { + .name = "gpmi", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = gpmi_resources, + .num_resources = ARRAY_SIZE(gpmi_resources), +}; + +static struct resource mmc1_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = REGS_SSP1_PHYS, + .end = REGS_SSP1_PHYS + REGS_SSP_SIZE, + }, { + .flags = IORESOURCE_DMA, + .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH), + .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH), + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_SSP1_DMA, + .end = IRQ_SSP1_DMA, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_SSP_ERROR, + .end = IRQ_SSP_ERROR, + }, +}; + +struct platform_device stmp3xxx_mmc = { + .name = "stmp3xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = mmc1_resource, + .num_resources = ARRAY_SIZE(mmc1_resource), +}; + +static struct resource usb_resources[] = { + { + .start = REGS_USBCTRL_PHYS, + .end = REGS_USBCTRL_PHYS + SZ_4K, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_USB_CTRL, + .end = IRQ_USB_CTRL, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device stmp3xxx_udc = { + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = usb_resources, + .num_resources = ARRAY_SIZE(usb_resources), +}; + +struct platform_device stmp3xxx_ehci = { + .name = "fsl-ehci", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = usb_resources, + .num_resources = ARRAY_SIZE(usb_resources), +}; + +static struct resource rtc_resources[] = { + { + .start = REGS_RTC_PHYS, + .end = REGS_RTC_PHYS + REGS_RTC_SIZE, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_RTC_ALARM, + .end = IRQ_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_RTC_1MSEC, + .end = IRQ_RTC_1MSEC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device stmp3xxx_rtc = { + .name = "stmp3xxx-rtc", + .id = -1, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), +}; + +static struct resource ssp1_resources[] = { + { + .start = REGS_SSP1_PHYS, + .end = REGS_SSP1_PHYS + REGS_SSP_SIZE, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_SSP1_DMA, + .end = IRQ_SSP1_DMA, + .flags = IORESOURCE_IRQ, + }, { + .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH), + .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH), + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource ssp2_resources[] = { + { + .start = REGS_SSP2_PHYS, + .end = REGS_SSP2_PHYS + REGS_SSP_SIZE, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_SSP2_DMA, + .end = IRQ_SSP2_DMA, + .flags = IORESOURCE_IRQ, + }, { + .start = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH), + .end = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH), + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device stmp3xxx_spi1 = { + .name = "stmp3xxx_ssp", + .id = 1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssp1_resources, + .num_resources = ARRAY_SIZE(ssp1_resources), +}; + +struct platform_device stmp3xxx_spi2 = { + .name = "stmp3xxx_ssp", + .id = 2, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssp2_resources, + .num_resources = ARRAY_SIZE(ssp2_resources), +}; + +static struct resource fb_resource[] = { + { + .flags = IORESOURCE_IRQ, + .start = IRQ_LCDIF_DMA, + .end = IRQ_LCDIF_DMA, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_LCDIF_ERROR, + .end = IRQ_LCDIF_ERROR, + }, { + .flags = IORESOURCE_MEM, + .start = REGS_LCDIF_PHYS, + .end = REGS_LCDIF_PHYS + REGS_LCDIF_SIZE, + }, +}; + +struct platform_device stmp3xxx_framebuffer = { + .name = "stmp3xxx-fb", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(fb_resource), + .resource = fb_resource, +}; + +#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2) \ + static char *cmdline_device_##name; \ + static int cmdline_device_##name##_setup(char *dev) \ + { \ + cmdline_device_##name = dev + 1; \ + return 0; \ + } \ + __setup(#name, cmdline_device_##name##_setup); \ + int stmp3xxx_##name##_device_register(void) \ + { \ + struct platform_device *d = NULL; \ + if (!cmdline_device_##name || \ + !strcmp(cmdline_device_##name, #dev1)) \ + d = &stmp3xxx_##dev1; \ + else if (!strcmp(cmdline_device_##name, #dev2)) \ + d = &stmp3xxx_##dev2; \ + else \ + printk(KERN_ERR"Unknown %s assignment '%s'.\n", \ + #name, cmdline_device_##name); \ + return d ? platform_device_register(d) : -ENOENT; \ + } + +CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1) +CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2) + +struct platform_device stmp3xxx_backlight = { + .name = "stmp3xxx-bl", + .id = -1, +}; + +struct platform_device stmp3xxx_rotdec = { + .name = "stmp3xxx-rotdec", + .id = -1, +}; + +struct platform_device stmp3xxx_persistent = { + .name = "stmp3xxx-persistent", + .id = -1, +}; + +struct platform_device stmp3xxx_dcp_bootstream = { + .name = "stmp3xxx-dcpboot", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource dcp_resources[] = { + { + .start = IRQ_DCP_VMI, + .end = IRQ_DCP_VMI, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_DCP, + .end = IRQ_DCP, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device stmp3xxx_dcp = { + .name = "stmp3xxx-dcp", + .id = -1, + .resource = dcp_resources, + .num_resources = ARRAY_SIZE(dcp_resources), + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource battery_resource[] = { + { + .flags = IORESOURCE_IRQ, + .start = IRQ_VDD5V, + .end = IRQ_VDD5V, + }, +}; + +struct platform_device stmp3xxx_battery = { + .name = "stmp3xxx-battery", + .resource = battery_resource, + .num_resources = ARRAY_SIZE(battery_resource), +}; diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c new file mode 100644 index 000000000000..d2f497764dce --- /dev/null +++ b/arch/arm/plat-stmp3xxx/dma.c @@ -0,0 +1,463 @@ +/* + * DMA helper routines for Freescale STMP37XX/STMP378X + * + * Author: dmitry pervushin <dpervushin@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/sysdev.h> +#include <linux/cpufreq.h> + +#include <asm/page.h> + +#include <mach/platform.h> +#include <mach/dma.h> +#include <mach/regs-apbx.h> +#include <mach/regs-apbh.h> + +static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command); +static const size_t pool_alignment = 8; +static struct stmp3xxx_dma_user { + void *pool; + int inuse; + const char *name; +} channels[MAX_DMA_CHANNELS]; + +#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS) +#define IS_USED(ch) (channels[ch].inuse) + +int stmp3xxx_dma_request(int ch, struct device *dev, const char *name) +{ + struct stmp3xxx_dma_user *user; + int err = 0; + + user = channels + ch; + if (!IS_VALID_CHANNEL(ch)) { + err = -ENODEV; + goto out; + } + if (IS_USED(ch)) { + err = -EBUSY; + goto out; + } + /* Create a pool to allocate dma commands from */ + user->pool = dma_pool_create(name, dev, pool_item_size, + pool_alignment, PAGE_SIZE); + if (user->pool == NULL) { + err = -ENOMEM; + goto out; + } + user->name = name; + user->inuse++; +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_request); + +int stmp3xxx_dma_release(int ch) +{ + struct stmp3xxx_dma_user *user = channels + ch; + int err = 0; + + if (!IS_VALID_CHANNEL(ch)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(ch)) { + err = -EBUSY; + goto out; + } + BUG_ON(user->pool == NULL); + dma_pool_destroy(user->pool); + user->inuse--; +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_release); + +int stmp3xxx_dma_read_semaphore(int channel) +{ + int sem = -1; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA + + STMP3XXX_DMA_CHANNEL(channel) * 0x70); + sem &= BM_APBH_CHn_SEMA_PHORE; + sem >>= BP_APBH_CHn_SEMA_PHORE; + break; + + case STMP3XXX_BUS_APBX: + sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA + + STMP3XXX_DMA_CHANNEL(channel) * 0x70); + sem &= BM_APBX_CHn_SEMA_PHORE; + sem >>= BP_APBX_CHn_SEMA_PHORE; + break; + default: + BUG(); + } + return sem; +} +EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore); + +int stmp3xxx_dma_allocate_command(int channel, + struct stmp3xxx_dma_descriptor *descriptor) +{ + struct stmp3xxx_dma_user *user = channels + channel; + int err = 0; + + if (!IS_VALID_CHANNEL(channel)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(channel)) { + err = -EBUSY; + goto out; + } + if (descriptor == NULL) { + err = -EINVAL; + goto out; + } + + /* Allocate memory for a command from the buffer */ + descriptor->command = + dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle); + + /* Check it worked */ + if (!descriptor->command) { + err = -ENOMEM; + goto out; + } + + memset(descriptor->command, 0, pool_item_size); +out: + WARN_ON(err); + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_allocate_command); + +int stmp3xxx_dma_free_command(int channel, + struct stmp3xxx_dma_descriptor *descriptor) +{ + int err = 0; + + if (!IS_VALID_CHANNEL(channel)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(channel)) { + err = -EBUSY; + goto out; + } + + /* Return the command memory to the pool */ + dma_pool_free(channels[channel].pool, descriptor->command, + descriptor->handle); + + /* Initialise descriptor so we're not tempted to use it */ + descriptor->command = NULL; + descriptor->handle = 0; + descriptor->virtual_buf_ptr = NULL; + descriptor->next_descr = NULL; + + WARN_ON(err); +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_free_command); + +void stmp3xxx_dma_go(int channel, + struct stmp3xxx_dma_descriptor *head, u32 semaphore) +{ + int ch = STMP3XXX_DMA_CHANNEL(channel); + void __iomem *c, *s; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch; + s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch; + break; + + case STMP3XXX_BUS_APBX: + c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch; + s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch; + break; + + default: + return; + } + + /* Set next command */ + __raw_writel(head->handle, c); + /* Set counting semaphore (kicks off transfer). Assumes + peripheral has been set up correctly */ + __raw_writel(semaphore, s); +} +EXPORT_SYMBOL(stmp3xxx_dma_go); + +int stmp3xxx_dma_running(int channel) +{ + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA + + 0x70 * STMP3XXX_DMA_CHANNEL(channel))) & + BM_APBH_CHn_SEMA_PHORE; + + case STMP3XXX_BUS_APBX: + return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA + + 0x70 * STMP3XXX_DMA_CHANNEL(channel))) & + BM_APBX_CHn_SEMA_PHORE; + default: + BUG(); + return 0; + } +} +EXPORT_SYMBOL(stmp3xxx_dma_running); + +/* + * Circular dma chain management + */ +void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain) +{ + int i; + + for (i = 0; i < chain->total_count; i++) + stmp3xxx_dma_free_command( + STMP3XXX_DMA(chain->channel, chain->bus), + &chain->chain[i]); +} +EXPORT_SYMBOL(stmp3xxx_dma_free_chain); + +int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain, + struct stmp3xxx_dma_descriptor descriptors[], + unsigned items) +{ + int i; + int err = 0; + + if (items == 0) + return err; + + for (i = 0; i < items; i++) { + err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]); + if (err) { + WARN_ON(err); + /* + * Couldn't allocate the whole chain. + * deallocate what has been allocated + */ + if (i) { + do { + stmp3xxx_dma_free_command(ch, + &descriptors + [i]); + } while (i-- >= 0); + } + return err; + } + + /* link them! */ + if (i > 0) { + descriptors[i - 1].next_descr = &descriptors[i]; + descriptors[i - 1].command->next = + descriptors[i].handle; + } + } + + /* make list circular */ + descriptors[items - 1].next_descr = &descriptors[0]; + descriptors[items - 1].command->next = descriptors[0].handle; + + chain->total_count = items; + chain->chain = descriptors; + chain->free_index = 0; + chain->active_index = 0; + chain->cooked_index = 0; + chain->free_count = items; + chain->active_count = 0; + chain->cooked_count = 0; + chain->bus = STMP3XXX_DMA_BUS(ch); + chain->channel = STMP3XXX_DMA_CHANNEL(ch); + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_make_chain); + +void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain) +{ + BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus))); + chain->free_index = 0; + chain->active_index = 0; + chain->cooked_index = 0; + chain->free_count = chain->total_count; + chain->active_count = 0; + chain->cooked_count = 0; +} +EXPORT_SYMBOL(stmp37xx_circ_clear_chain); + +void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain, + unsigned count) +{ + BUG_ON(chain->cooked_count < count); + + chain->cooked_count -= count; + chain->cooked_index += count; + chain->cooked_index %= chain->total_count; + chain->free_count += count; +} +EXPORT_SYMBOL(stmp37xx_circ_advance_free); + +void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain, + unsigned count) +{ + void __iomem *c; + u32 mask_clr, mask; + BUG_ON(chain->free_count < count); + + chain->free_count -= count; + chain->free_index += count; + chain->free_index %= chain->total_count; + chain->active_count += count; + + switch (chain->bus) { + case STMP3XXX_BUS_APBH: + c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel; + mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA; + mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA); + break; + case STMP3XXX_BUS_APBX: + c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel; + mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA; + mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA); + break; + default: + BUG(); + return; + } + + /* Set counting semaphore (kicks off transfer). Assumes + peripheral has been set up correctly */ + stmp3xxx_clearl(mask_clr, c); + stmp3xxx_setl(mask, c); +} +EXPORT_SYMBOL(stmp37xx_circ_advance_active); + +unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain) +{ + unsigned cooked; + + cooked = chain->active_count - + stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus)); + + chain->active_count -= cooked; + chain->active_index += cooked; + chain->active_index %= chain->total_count; + + chain->cooked_count += cooked; + + return cooked; +} +EXPORT_SYMBOL(stmp37xx_circ_advance_cooked); + +void stmp3xxx_dma_set_alt_target(int channel, int function) +{ +#if defined(CONFIG_ARCH_STMP37XX) + unsigned bits = 4; +#elif defined(CONFIG_ARCH_STMP378X) + unsigned bits = 2; +#else +#error wrong arch +#endif + int shift = STMP3XXX_DMA_CHANNEL(channel) * bits; + unsigned mask = (1<<bits) - 1; + void __iomem *c; + + BUG_ON(function < 0 || function >= (1<<bits)); + pr_debug("%s: channel = %d, using mask %x, " + "shift = %d\n", __func__, channel, mask, shift); + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c = REGS_APBH_BASE + HW_APBH_DEVSEL; + break; + case STMP3XXX_BUS_APBX: + c = REGS_APBX_BASE + HW_APBX_DEVSEL; + break; + default: + BUG(); + } + stmp3xxx_clearl(mask << shift, c); + stmp3xxx_setl(mask << shift, c); +} +EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target); + +void stmp3xxx_dma_suspend(void) +{ + stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0); + stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0); +} + +void stmp3xxx_dma_resume(void) +{ + stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST, + REGS_APBH_BASE + HW_APBH_CTRL0); + stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST, + REGS_APBX_BASE + HW_APBX_CTRL0); +} + +#ifdef CONFIG_CPU_FREQ + +struct dma_notifier_block { + struct notifier_block nb; + void *data; +}; + +static int dma_cpufreq_notifier(struct notifier_block *self, + unsigned long phase, void *p) +{ + switch (phase) { + case CPUFREQ_POSTCHANGE: + stmp3xxx_dma_resume(); + break; + + case CPUFREQ_PRECHANGE: + stmp3xxx_dma_suspend(); + break; + + default: + break; + } + + return NOTIFY_DONE; +} + +static struct dma_notifier_block dma_cpufreq_nb = { + .nb = { + .notifier_call = dma_cpufreq_notifier, + }, +}; +#endif /* CONFIG_CPU_FREQ */ + +void __init stmp3xxx_dma_init(void) +{ + stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST, + REGS_APBH_BASE + HW_APBH_CTRL0); + stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST, + REGS_APBX_BASE + HW_APBX_CTRL0); +#ifdef CONFIG_CPU_FREQ + cpufreq_register_notifier(&dma_cpufreq_nb.nb, + CPUFREQ_TRANSITION_NOTIFIER); +#endif /* CONFIG_CPU_FREQ */ +} diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h new file mode 100644 index 000000000000..f9c39772d7c5 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h @@ -0,0 +1,18 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h new file mode 100644 index 000000000000..b4e205b95f2c --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/cputype.h @@ -0,0 +1,33 @@ +/* + * Freescale STMP37XX/STMP378X CPU type detection + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_CPU_H +#define __ASM_PLAT_CPU_H + +#ifdef CONFIG_ARCH_STMP37XX +#define cpu_is_stmp37xx() (1) +#else +#define cpu_is_stmp37xx() (0) +#endif + +#ifdef CONFIG_ARCH_STMP378X +#define cpu_is_stmp378x() (1) +#else +#define cpu_is_stmp378x() (0) +#endif + +#endif /* __ASM_PLAT_CPU_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S new file mode 100644 index 000000000000..fb3b969bf0a2 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S @@ -0,0 +1,42 @@ +/* + * Debugging macro include header + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x80000000 @ physical base address + addeq \rx, \rx, #0x00070000 + movne \rx, #0xf0000000 @ virtual base + addne \rx, \rx, #0x00070000 + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #0] @ data register at 0 + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy + bne 1001b + .endm diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h new file mode 100644 index 000000000000..7c58557c6766 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/dma.h @@ -0,0 +1,153 @@ +/* + * Freescale STMP37XX/STMP378X DMA helper interface + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_STMP3XXX_DMA_H +#define __ASM_PLAT_STMP3XXX_DMA_H + +#include <linux/platform_device.h> +#include <linux/dmapool.h> + +#if !defined(MAX_PIO_WORDS) +#define MAX_PIO_WORDS (15) +#endif + +#define STMP3XXX_BUS_APBH 0 +#define STMP3XXX_BUS_APBX 1 +#define STMP3XXX_DMA_MAX_CHANNEL 16 +#define STMP3XXX_DMA_BUS(dma) ((dma) / 16) +#define STMP3XXX_DMA_CHANNEL(dma) ((dma) % 16) +#define STMP3XXX_DMA(channel, bus) ((bus) * 16 + (channel)) +#define MAX_DMA_ADDRESS 0xffffffff +#define MAX_DMA_CHANNELS 32 + +struct stmp3xxx_dma_command { + u32 next; + u32 cmd; + union { + u32 buf_ptr; + u32 alternate; + }; + u32 pio_words[MAX_PIO_WORDS]; +}; + +struct stmp3xxx_dma_descriptor { + struct stmp3xxx_dma_command *command; + dma_addr_t handle; + + /* The virtual address of the buffer pointer */ + void *virtual_buf_ptr; + /* The next descriptor in a the DMA chain (optional) */ + struct stmp3xxx_dma_descriptor *next_descr; +}; + +struct stmp37xx_circ_dma_chain { + unsigned total_count; + struct stmp3xxx_dma_descriptor *chain; + + unsigned free_index; + unsigned free_count; + unsigned active_index; + unsigned active_count; + unsigned cooked_index; + unsigned cooked_count; + + int bus; + unsigned channel; +}; + +static inline struct stmp3xxx_dma_descriptor + *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain) +{ + return &(chain->chain[chain->free_index]); +} + +static inline struct stmp3xxx_dma_descriptor + *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain) +{ + return &(chain->chain[chain->cooked_index]); +} + +int stmp3xxx_dma_request(int ch, struct device *dev, const char *name); +int stmp3xxx_dma_release(int ch); +int stmp3xxx_dma_allocate_command(int ch, + struct stmp3xxx_dma_descriptor *descriptor); +int stmp3xxx_dma_free_command(int ch, + struct stmp3xxx_dma_descriptor *descriptor); +void stmp3xxx_dma_continue(int channel, u32 semaphore); +void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head, + u32 semaphore); +int stmp3xxx_dma_running(int ch); +int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain, + struct stmp3xxx_dma_descriptor descriptors[], + unsigned items); +void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain); +void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain); +void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain, + unsigned count); +void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain, + unsigned count); +unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain); +int stmp3xxx_dma_read_semaphore(int ch); +void stmp3xxx_dma_init(void); +void stmp3xxx_dma_set_alt_target(int ch, int target); +void stmp3xxx_dma_suspend(void); +void stmp3xxx_dma_resume(void); + +/* + * STMP37xx and STMP378x have different DMA control + * registers layout + */ + +void stmp3xxx_arch_dma_freeze(int ch); +void stmp3xxx_arch_dma_unfreeze(int ch); +void stmp3xxx_arch_dma_reset_channel(int ch); +void stmp3xxx_arch_dma_enable_interrupt(int ch); +void stmp3xxx_arch_dma_clear_interrupt(int ch); +int stmp3xxx_arch_dma_is_interrupt(int ch); + +static inline void stmp3xxx_dma_reset_channel(int ch) +{ + stmp3xxx_arch_dma_reset_channel(ch); +} + + +static inline void stmp3xxx_dma_freeze(int ch) +{ + stmp3xxx_arch_dma_freeze(ch); +} + +static inline void stmp3xxx_dma_unfreeze(int ch) +{ + stmp3xxx_arch_dma_unfreeze(ch); +} + +static inline void stmp3xxx_dma_enable_interrupt(int ch) +{ + stmp3xxx_arch_dma_enable_interrupt(ch); +} + +static inline void stmp3xxx_dma_clear_interrupt(int ch) +{ + stmp3xxx_arch_dma_clear_interrupt(ch); +} + +static inline int stmp3xxx_dma_is_interrupt(int ch) +{ + return stmp3xxx_arch_dma_is_interrupt(ch); +} + +#endif /* __ASM_PLAT_STMP3XXX_DMA_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h new file mode 100644 index 000000000000..a8b579256170 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/gpio.h @@ -0,0 +1,28 @@ +/* + * Freescale STMP37XX/STMP378X GPIO interface + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_GPIO_H +#define __ASM_PLAT_GPIO_H + +#define ARCH_NR_GPIOS (32 * 3) +#define gpio_to_irq(gpio) __gpio_to_irq(gpio) +#define gpio_get_value(gpio) __gpio_get_value(gpio) +#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h new file mode 100644 index 000000000000..e166432910ad --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h @@ -0,0 +1,12 @@ +#ifndef __MACH_GPMI_H + +#include <linux/mtd/partitions.h> +#include <mach/regs-gpmi.h> + +struct gpmi_platform_data { + void *pins; + int nr_parts; + struct mtd_partition *parts; + const char *part_types[]; +}; +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h new file mode 100644 index 000000000000..47b8978405bc --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/hardware.h @@ -0,0 +1,32 @@ +/* + * This file contains the hardware definitions of the Freescale STMP3XXX + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* + * Where in virtual memory the IO devices (timers, system controllers + * and so on) + */ +#define IO_BASE 0xF0000000 /* VA of IO */ +#define IO_SIZE 0x00100000 /* How much? */ +#define IO_START 0x80000000 /* PA of IO */ + +/* macro to get at IO space when running virtually */ +#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h new file mode 100644 index 000000000000..d08b1b7f3d1c --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/io.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h new file mode 100644 index 000000000000..7b875a07a1a7 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h @@ -0,0 +1,22 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x40000000) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/mmc.h b/arch/arm/plat-stmp3xxx/include/mach/mmc.h new file mode 100644 index 000000000000..ba81e1543761 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/mmc.h @@ -0,0 +1,14 @@ +#ifndef _MACH_MMC_H +#define _MACH_MMC_H + +#include <mach/regs-ssp.h> + +struct stmp3xxxmmc_platform_data { + int (*get_wp)(void); + unsigned long (*setclock)(void __iomem *base, unsigned long); + void (*cmd_pullup)(int); + int (*hw_init)(void); + void (*hw_release)(void); +}; + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h new file mode 100644 index 000000000000..cc5af82279ad --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h @@ -0,0 +1,157 @@ +/* + * Freescale STMP37XX/STMP378X Pin Multiplexing + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __PINMUX_H +#define __PINMUX_H + +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/gpio.h> +#include <asm-generic/gpio.h> + +/* Pin definitions */ +#include "pins.h" +#include <mach/pins.h> + +/* + * Each pin may be routed up to four different HW interfaces + * including GPIO + */ +enum pin_fun { + PIN_FUN1 = 0, + PIN_FUN2, + PIN_FUN3, + PIN_GPIO, +}; + +/* + * Each pin may have different output drive strength in range from + * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths. + */ +enum pin_strength { + PIN_4MA = 0, + PIN_8MA, + PIN_12MA, + PIN_16MA, + PIN_20MA, +}; + +/* + * Each pin can be programmed for 1.8V or 3.3V + */ +enum pin_voltage { + PIN_1_8V = 0, + PIN_3_3V, +}; + +/* + * Structure to define a group of pins and their parameters + */ +struct pin_desc { + unsigned id; + enum pin_fun fun; + enum pin_strength strength; + enum pin_voltage voltage; + unsigned pullup:1; +}; + +struct pin_group { + struct pin_desc *pins; + int nr_pins; +}; + +/* Set pin drive strength */ +void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength, + const char *label); + +/* Set pin voltage */ +void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage, + const char *label); + +/* Enable pull-up resistor for a pin */ +void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label); + +/* + * Request a pin ownership, only one module (identified by @label) + * may own a pin. + */ +int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label); + +/* Release pin */ +void stmp3xxx_release_pin(unsigned id, const char *label); + +void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun); + +/* + * Each bank is associated with a number of registers to control + * pin function, drive strength, voltage and pull-up reigster. The + * number of registers of a given type depends on the number of bits + * describin particular pin. + */ +#define HW_MUXSEL_NUM 2 /* registers per bank */ +#define HW_MUXSEL_PIN_LEN 2 /* bits per pin */ +#define HW_MUXSEL_PIN_NUM 16 /* pins per register */ +#define HW_MUXSEL_PINFUN_MASK 0x3 /* pin function mask */ +#define HW_MUXSEL_PINFUN_NUM 4 /* four options for a pin */ + +#define HW_DRIVE_NUM 4 /* registers per bank */ +#define HW_DRIVE_PIN_LEN 4 /* bits per pin */ +#define HW_DRIVE_PIN_NUM 8 /* pins per register */ +#define HW_DRIVE_PINDRV_MASK 0x3 /* pin strength mask - 2 bits */ +#define HW_DRIVE_PINDRV_NUM 5 /* five possible strength values */ +#define HW_DRIVE_PINV_MASK 0x4 /* pin voltage mask - 1 bit */ + + +struct stmp3xxx_pinmux_bank { + struct gpio_chip chip; + + /* Pins allocation map */ + unsigned long pin_map; + + /* Pin owner names */ + const char *pin_labels[32]; + + /* Bank registers */ + void __iomem *hw_muxsel[HW_MUXSEL_NUM]; + void __iomem *hw_drive[HW_DRIVE_NUM]; + void __iomem *hw_pull; + + void __iomem *pin2irq, + *irqlevel, + *irqpolarity, + *irqen, + *irqstat; + + /* HW MUXSEL register function bit values */ + u8 functions[HW_MUXSEL_PINFUN_NUM]; + + /* + * HW DRIVE register strength bit values: + * 0xff - requested strength is not supported for this bank + */ + u8 strengths[HW_DRIVE_PINDRV_NUM]; + + /* GPIO things */ + void __iomem *hw_gpio_in, + *hw_gpio_out, + *hw_gpio_doe; + int irq, virq; +}; + +int __init stmp3xxx_pinmux_init(int virtual_irq_start); + +#endif /* __PINMUX_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h new file mode 100644 index 000000000000..c573318e1caa --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/pins.h @@ -0,0 +1,30 @@ +/* + * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_PINS_H +#define __ASM_PLAT_PINS_H + +#define STMP3XXX_PINID(bank, pin) (bank * 32 + pin) +#define STMP3XXX_PINID_TO_BANK(pinid) (pinid / 32) +#define STMP3XXX_PINID_TO_PINNUM(pinid) (pinid % 32) + +/* + * Special invalid pin identificator to show a pin doesn't exist + */ +#define PINID_NO_PIN STMP3XXX_PINID(0xFF, 0xFF) + +#endif /* __ASM_PLAT_PINS_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h new file mode 100644 index 000000000000..7007ddaa91eb --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/platform.h @@ -0,0 +1,68 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_PLATFORM_H +#define __ASM_PLAT_PLATFORM_H + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif +#include <asm/sizes.h> + +/* Virtual address where registers are mapped */ +#define STMP3XXX_REGS_PHBASE 0x80000000 +#ifdef __ASSEMBLER__ +#define STMP3XXX_REGS_BASE 0xF0000000 +#else +#define STMP3XXX_REGS_BASE (void __iomem *)0xF0000000 +#endif +#define STMP3XXX_REGS_SIZE SZ_1M + +/* Virtual address where OCRAM is mapped */ +#define STMP3XXX_OCRAM_PHBASE 0x00000000 +#ifdef __ASSEMBLER__ +#define STMP3XXX_OCRAM_BASE 0xf1000000 +#else +#define STMP3XXX_OCRAM_BASE (void __iomem *)0xf1000000 +#endif +#define STMP3XXX_OCRAM_SIZE (32 * SZ_1K) + +#ifdef CONFIG_ARCH_STMP37XX +#define IRQ_PRIORITY_REG_RD HW_ICOLL_PRIORITYn_RD +#define IRQ_PRIORITY_REG_WR HW_ICOLL_PRIORITYn_WR +#endif + +#ifdef CONFIG_ARCH_STMP378X +#define IRQ_PRIORITY_REG_RD HW_ICOLL_INTERRUPTn_RD +#define IRQ_PRIORITY_REG_WR HW_ICOLL_INTERRUPTn_WR +#endif + +#define HW_STMP3XXX_SET 0x04 +#define HW_STMP3XXX_CLR 0x08 +#define HW_STMP3XXX_TOG 0x0c + +#ifndef __ASSEMBLER__ +static inline void stmp3xxx_clearl(u32 v, void __iomem *r) +{ + __raw_writel(v, r + HW_STMP3XXX_CLR); +} + +static inline void stmp3xxx_setl(u32 v, void __iomem *r) +{ + __raw_writel(v, r + HW_STMP3XXX_SET); +} +#endif + +#define BF(value, field) (((value) << BP_##field) & BM_##field) + +#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h new file mode 100644 index 000000000000..2e300feaa4cf --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h @@ -0,0 +1,54 @@ +/* + * Freescale STMP37XX/STMP378X core structure and function declarations + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_STMP3XXX_H +#define __ASM_PLAT_STMP3XXX_H + +#include <linux/irq.h> + +extern struct sys_timer stmp3xxx_timer; + +void stmp3xxx_init_irq(struct irq_chip *chip); +void stmp3xxx_init(void); +int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable); +extern struct platform_device stmp3xxx_dbguart, + stmp3xxx_appuart, + stmp3xxx_watchdog, + stmp3xxx_touchscreen, + stmp3xxx_keyboard, + stmp3xxx_gpmi, + stmp3xxx_mmc, + stmp3xxx_udc, + stmp3xxx_ehci, + stmp3xxx_rtc, + stmp3xxx_spi1, + stmp3xxx_spi2, + stmp3xxx_backlight, + stmp3xxx_rotdec, + stmp3xxx_dcp, + stmp3xxx_dcp_bootstream, + stmp3xxx_persistent, + stmp3xxx_framebuffer, + stmp3xxx_battery; +int stmp3xxx_ssp1_device_register(void); +int stmp3xxx_ssp2_device_register(void); + +struct pin_group; +void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label); +int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label); + +#endif /* __ASM_PLAT_STMP3XXX_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h new file mode 100644 index 000000000000..28a988889319 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/system.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <asm/proc-fns.h> +#include <mach/platform.h> +#include <mach/regs-clkctrl.h> +#include <mach/regs-power.h> + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + /* Set BATTCHRG to default value */ + __raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE); + + /* Set MINPWR to default value */ + __raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR); + + /* Reset digital side of chip (but not power or RTC) */ + __raw_writel(BM_CLKCTRL_RESET_DIG, + REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET); + + /* Should not return */ +} + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h new file mode 100644 index 000000000000..3373985d7a8e --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/timex.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 1999 ARM Limited + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * System time clock is sourced from the 32k clock + */ +#define CLOCK_TICK_RATE (32768) diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h new file mode 100644 index 000000000000..f79f5ee56cd4 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h @@ -0,0 +1,53 @@ +/* + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_UNCOMPRESS_H +#define __ASM_PLAT_UNCOMPRESS_H + +/* + * Register includes are for when the MMU enabled; we need to define our + * own stuff here for pre-MMU use + */ +#define UARTDBG_BASE 0x80070000 +#define UART(c) (((volatile unsigned *)UARTDBG_BASE)[c]) + +/* + * This does not append a newline + */ +static void putc(char c) +{ + /* Wait for TX fifo empty */ + while ((UART(6) & (1<<7)) == 0) + continue; + + /* Write byte */ + UART(0) = c; + + /* Wait for last bit to exit the UART */ + while (UART(6) & (1<<3)) + continue; +} + +static void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif /* __ASM_PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h new file mode 100644 index 000000000000..541b880c1863 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h @@ -0,0 +1,12 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#define VMALLOC_END (0xF0000000) diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c new file mode 100644 index 000000000000..20de4e0401ef --- /dev/null +++ b/arch/arm/plat-stmp3xxx/irq.c @@ -0,0 +1,51 @@ +/* + * Freescale STMP37XX/STMP378X common interrupt handling code + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/sysdev.h> + +#include <mach/stmp3xxx.h> +#include <mach/platform.h> +#include <mach/regs-icoll.h> + +void __init stmp3xxx_init_irq(struct irq_chip *chip) +{ + unsigned int i, lv; + + /* Reset the interrupt controller */ + stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true); + + /* Disable all interrupts initially */ + for (i = 0; i < NR_REAL_IRQS; i++) { + chip->mask(i); + set_irq_chip(i, chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } + + /* Ensure vector is cleared */ + for (lv = 0; lv < 4; lv++) + __raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK); + __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR); + + /* Barrier */ + (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT); +} + diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c new file mode 100644 index 000000000000..d41200382208 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/pinmux.c @@ -0,0 +1,552 @@ +/* + * Freescale STMP378X/STMP378X Pin Multiplexing + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#define DEBUG +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/sysdev.h> +#include <linux/string.h> +#include <linux/bitops.h> +#include <linux/sysdev.h> +#include <linux/irq.h> + +#include <mach/hardware.h> +#include <mach/platform.h> +#include <mach/regs-pinctrl.h> +#include <mach/pins.h> +#include <mach/pinmux.h> + +#define NR_BANKS ARRAY_SIZE(pinmux_banks) +static struct stmp3xxx_pinmux_bank pinmux_banks[] = { + [0] = { + .hw_muxsel = { + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0, + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1, + }, + .hw_drive = { + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3, + }, + .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff }, + + .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0, + .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0, + .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0, + .irq = IRQ_GPIO0, + + .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0, + .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0, + .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0, + .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0, + .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0, + }, + [1] = { + .hw_muxsel = { + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2, + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3, + }, + .hw_drive = { + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7, + }, + .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff }, + + .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1, + .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1, + .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1, + .irq = IRQ_GPIO1, + + .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1, + .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1, + .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1, + .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1, + .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1, + }, + [2] = { + .hw_muxsel = { + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4, + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5, + }, + .hw_drive = { + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11, + }, + .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 }, + + .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2, + .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2, + .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2, + .irq = IRQ_GPIO2, + + .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2, + .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2, + .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2, + .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2, + .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2, + }, + [3] = { + .hw_muxsel = { + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6, + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7, + }, + .hw_drive = { + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14, + NULL, + }, + .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3, + .functions = {0x0, 0x1, 0x2, 0x3}, + .strengths = {0x0, 0x1, 0x2, 0x3, 0xff}, + }, +}; + +static inline struct stmp3xxx_pinmux_bank * +stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin) +{ + unsigned b, p; + + b = STMP3XXX_PINID_TO_BANK(id); + p = STMP3XXX_PINID_TO_PINNUM(id); + BUG_ON(b >= NR_BANKS); + if (bank) + *bank = b; + if (pin) + *pin = p; + return &pinmux_banks[b]; +} + +/* Check if requested pin is owned by caller */ +static int stmp3xxx_check_pin(unsigned id, const char *label) +{ + unsigned pin; + struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin); + + if (!test_bit(pin, &pm->pin_map)) { + printk(KERN_WARNING + "%s: Accessing free pin %x, caller %s\n", + __func__, id, label); + + return -EINVAL; + } + + if (label && pm->pin_labels[pin] && + strcmp(label, pm->pin_labels[pin])) { + printk(KERN_WARNING + "%s: Wrong pin owner %x, caller %s owner %s\n", + __func__, id, label, pm->pin_labels[pin]); + + return -EINVAL; + } + return 0; +} + +void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength, + const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwdrive; + u32 shift, val; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label, + bank, pin, strength); + + hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM]; + shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN; + val = pbank->strengths[strength]; + if (val == 0xff) { + printk(KERN_WARNING + "%s: strength is not supported for bank %d, caller %s", + __func__, bank, label); + return; + } + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: writing 0x%x to 0x%p register\n", __func__, + val << shift, hwdrive); + stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive); + stmp3xxx_setl(val << shift, hwdrive); +} + +void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage, + const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwdrive; + u32 shift; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label, + bank, pin, voltage); + + hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM]; + shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN; + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: changing 0x%x bit in 0x%p register\n", + __func__, HW_DRIVE_PINV_MASK << shift, hwdrive); + if (voltage == PIN_1_8V) + stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive); + else + stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive); +} + +void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwpull; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label, + bank, pin, enable); + + hwpull = pbank->hw_pull; + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: changing 0x%x bit in 0x%p register\n", + __func__, 1 << pin, hwpull); + if (enable) + stmp3xxx_setl(1 << pin, hwpull); + else + stmp3xxx_clearl(1 << pin, hwpull); +} + +int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + u32 bank, pin; + int ret = 0; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label, + bank, pin, fun); + + if (test_bit(pin, &pbank->pin_map)) { + printk(KERN_WARNING + "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n", + __func__, bank, pin, label, pbank->pin_labels[pin]); + return -EBUSY; + } + + set_bit(pin, &pbank->pin_map); + pbank->pin_labels[pin] = label; + + stmp3xxx_set_pin_type(id, fun); + + return ret; +} + +void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwmux; + u32 shift, val; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + + hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM]; + shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN; + + val = pbank->functions[fun]; + shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN; + pr_debug("%s: writing 0x%x to 0x%p register\n", + __func__, val << shift, hwmux); + stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux); + stmp3xxx_setl(val << shift, hwmux); +} + +void stmp3xxx_release_pin(unsigned id, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin); + + if (stmp3xxx_check_pin(id, label)) + return; + + clear_bit(pin, &pbank->pin_map); + pbank->pin_labels[pin] = NULL; +} + +int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label) +{ + struct pin_desc *pin; + int p; + int err = 0; + + /* Allocate and configure pins */ + for (p = 0; p < pin_group->nr_pins; p++) { + pr_debug("%s: #%d\n", __func__, p); + pin = &pin_group->pins[p]; + + err = stmp3xxx_request_pin(pin->id, pin->fun, label); + if (err) + goto out_err; + + stmp3xxx_pin_strength(pin->id, pin->strength, label); + stmp3xxx_pin_voltage(pin->id, pin->voltage, label); + stmp3xxx_pin_pullup(pin->id, pin->pullup, label); + } + + return 0; + +out_err: + /* Release allocated pins in case of error */ + while (--p >= 0) { + pr_debug("%s: releasing #%d\n", __func__, p); + stmp3xxx_release_pin(pin_group->pins[p].id, label); + } + return err; +} +EXPORT_SYMBOL(stmp3xxx_request_pin_group); + +void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label) +{ + struct pin_desc *pin; + int p; + + for (p = 0; p < pin_group->nr_pins; p++) { + pin = &pin_group->pins[p]; + stmp3xxx_release_pin(pin->id, label); + } +} +EXPORT_SYMBOL(stmp3xxx_release_pin_group); + +static int stmp3xxx_irq_to_gpio(int irq, + struct stmp3xxx_pinmux_bank **bank, unsigned *gpio) +{ + struct stmp3xxx_pinmux_bank *pm; + + for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++) + if (pm->virq <= irq && irq < pm->virq + 32) { + *bank = pm; + *gpio = irq - pm->virq; + return 0; + } + return -ENOENT; +} + +static int stmp3xxx_set_irqtype(unsigned irq, unsigned type) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + int l, p; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + switch (type) { + case IRQ_TYPE_EDGE_RISING: + l = 0; p = 1; break; + case IRQ_TYPE_EDGE_FALLING: + l = 0; p = 0; break; + case IRQ_TYPE_LEVEL_HIGH: + l = 1; p = 1; break; + case IRQ_TYPE_LEVEL_LOW: + l = 1; p = 0; break; + default: + pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n", + __func__, type); + return -ENXIO; + } + + if (l) + stmp3xxx_setl(1 << gpio, pm->irqlevel); + else + stmp3xxx_clearl(1 << gpio, pm->irqlevel); + if (p) + stmp3xxx_setl(1 << gpio, pm->irqpolarity); + else + stmp3xxx_clearl(1 << gpio, pm->irqpolarity); + return 0; +} + +static void stmp3xxx_pin_ack_irq(unsigned irq) +{ + u32 stat; + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + stat = __raw_readl(pm->irqstat) & (1 << gpio); + stmp3xxx_clearl(stat, pm->irqstat); +} + +static void stmp3xxx_pin_mask_irq(unsigned irq) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + stmp3xxx_clearl(1 << gpio, pm->irqen); + stmp3xxx_clearl(1 << gpio, pm->pin2irq); +} + +static void stmp3xxx_pin_unmask_irq(unsigned irq) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + stmp3xxx_setl(1 << gpio, pm->irqen); + stmp3xxx_setl(1 << gpio, pm->pin2irq); +} + +static inline +struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip) +{ + return container_of(chip, struct stmp3xxx_pinmux_bank, chip); +} + +static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + return pm->virq + offset; +} + +static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + unsigned v; + + v = __raw_readl(pm->hw_gpio_in) & (1 << offset); + return v ? 1 : 0; +} + +static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + if (v) + stmp3xxx_setl(1 << offset, pm->hw_gpio_out); + else + stmp3xxx_clearl(1 << offset, pm->hw_gpio_out); +} + +static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + stmp3xxx_setl(1 << offset, pm->hw_gpio_doe); + stmp3xxx_gpio_set(chip, offset, v); + return 0; +} + +static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe); + return 0; +} + +static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio"); +} + +static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + stmp3xxx_release_pin(chip->base + offset, "gpio"); +} + +static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc) +{ + struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq); + int gpio_irq = pm->virq; + u32 stat = __raw_readl(pm->irqstat); + + while (stat) { + if (stat & 1) + irq_desc[gpio_irq].handle_irq(gpio_irq, + &irq_desc[gpio_irq]); + gpio_irq++; + stat >>= 1; + } +} + +static struct irq_chip gpio_irq_chip = { + .ack = stmp3xxx_pin_ack_irq, + .mask = stmp3xxx_pin_mask_irq, + .unmask = stmp3xxx_pin_unmask_irq, + .set_type = stmp3xxx_set_irqtype, +}; + +int __init stmp3xxx_pinmux_init(int virtual_irq_start) +{ + int b, r = 0; + struct stmp3xxx_pinmux_bank *pm; + int virq; + + for (b = 0; b < 3; b++) { + /* only banks 0,1,2 are allowed to GPIO */ + pm = pinmux_banks + b; + pm->chip.base = 32 * b; + pm->chip.ngpio = 32; + pm->chip.owner = THIS_MODULE; + pm->chip.can_sleep = 1; + pm->chip.exported = 1; + pm->chip.to_irq = stmp3xxx_gpio_to_irq; + pm->chip.direction_input = stmp3xxx_gpio_input; + pm->chip.direction_output = stmp3xxx_gpio_output; + pm->chip.get = stmp3xxx_gpio_get; + pm->chip.set = stmp3xxx_gpio_set; + pm->chip.request = stmp3xxx_gpio_request; + pm->chip.free = stmp3xxx_gpio_free; + pm->virq = virtual_irq_start + b * 32; + + for (virq = pm->virq; virq < pm->virq; virq++) { + gpio_irq_chip.mask(virq); + set_irq_chip(virq, &gpio_irq_chip); + set_irq_handler(virq, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); + } + r = gpiochip_add(&pm->chip); + if (r < 0) + break; + set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq); + set_irq_data(pm->irq, pm); + } + return r; +} + +MODULE_AUTHOR("Vladislav Buzov"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c new file mode 100644 index 000000000000..063c7bc0e740 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/timer.c @@ -0,0 +1,189 @@ +/* + * System timer for Freescale STMP37XX/STMP378X + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/mach/time.h> +#include <mach/stmp3xxx.h> +#include <mach/platform.h> +#include <mach/regs-timrot.h> + +static irqreturn_t +stmp3xxx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *c = dev_id; + + /* timer 0 */ + if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) & + BM_TIMROT_TIMCTRLn_IRQ) { + stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0); + c->event_handler(c); + } + + /* timer 1 */ + else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1) + & BM_TIMROT_TIMCTRLn_IRQ) { + stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1); + stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1); + __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1); + } + + return IRQ_HANDLED; +} + +static cycle_t stmp3xxx_clock_read(struct clocksource *cs) +{ + return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1) + & 0xFFFF0000) >> 16); +} + +static int +stmp3xxx_timrot_set_next_event(unsigned long delta, + struct clock_event_device *dev) +{ + /* reload the timer */ + __raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0); + return 0; +} + +static void +stmp3xxx_timrot_set_mode(enum clock_event_mode mode, + struct clock_event_device *dev) +{ +} + +static struct clock_event_device ckevt_timrot = { + .name = "timrot", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_next_event = stmp3xxx_timrot_set_next_event, + .set_mode = stmp3xxx_timrot_set_mode, +}; + +static struct clocksource cksrc_stmp3xxx = { + .name = "cksrc_stmp3xxx", + .rating = 250, + .read = stmp3xxx_clock_read, + .mask = CLOCKSOURCE_MASK(16), + .shift = 10, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static struct irqaction stmp3xxx_timer_irq = { + .name = "stmp3xxx_timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = stmp3xxx_timer_interrupt, + .dev_id = &ckevt_timrot, +}; + + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +static void __init stmp3xxx_init_timer(void) +{ + cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE, + cksrc_stmp3xxx.shift); + ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + ckevt_timrot.shift); + ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot); + ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot); + ckevt_timrot.cpumask = cpumask_of(0); + + stmp3xxx_reset_block(REGS_TIMROT_BASE, false); + + /* clear two timers */ + __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0); + __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1); + + /* configure them */ + __raw_writel( + (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */ + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0); + __raw_writel( + (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */ + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1); + + __raw_writel(CLOCK_TICK_RATE / HZ - 1, + REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0); + __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1); + + setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq); + + clocksource_register(&cksrc_stmp3xxx); + clockevents_register_device(&ckevt_timrot); +} + +#ifdef CONFIG_PM + +void stmp3xxx_suspend_timer(void) +{ + stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0); + stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE, + REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL); +} + +void stmp3xxx_resume_timer(void) +{ + stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE, + REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL); + __raw_writel( + 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */ + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0); + __raw_writel( + 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */ + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1); + __raw_writel(CLOCK_TICK_RATE / HZ - 1, + REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0); + __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1); +} + +#else + +#define stmp3xxx_suspend_timer NULL +#define stmp3xxx_resume_timer NULL + +#endif /* CONFIG_PM */ + +struct sys_timer stmp3xxx_timer = { + .init = stmp3xxx_init_timer, + .suspend = stmp3xxx_suspend_timer, + .resume = stmp3xxx_resume_timer, +}; diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 83c4e384b16d..1aeae38725dd 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -100,6 +100,7 @@ ENTRY(vfp_support_entry) beq no_old_VFP_process VFPFSTMIA r4, r5 @ save the working registers VFPFMRX r5, FPSCR @ current status +#ifndef CONFIG_CPU_FEROCEON tst r1, #FPEXC_EX @ is there additional state to save? beq 1f VFPFMRX r6, FPINST @ FPINST (only if FPEXC.EX is set) @@ -107,6 +108,7 @@ ENTRY(vfp_support_entry) beq 1f VFPFMRX r8, FPINST2 @ FPINST2 if needed (and present) 1: +#endif stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @ start of the register dump @@ -119,6 +121,7 @@ no_old_VFP_process: VFPFLDMIA r10, r5 @ reload the working registers while @ FPEXC is in a safe state ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 +#ifndef CONFIG_CPU_FEROCEON tst r1, #FPEXC_EX @ is there additional state to restore? beq 1f VFPFMXR FPINST, r6 @ restore FPINST (only if FPEXC.EX is set) @@ -126,6 +129,7 @@ no_old_VFP_process: beq 1f VFPFMXR FPINST2, r8 @ FPINST2 if needed (and present) 1: +#endif VFPFMXR FPSCR, r5 @ restore status check_for_exception: diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 01599c4ef726..2d7423af1197 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -253,12 +253,14 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) } if (fpexc & FPEXC_EX) { +#ifndef CONFIG_CPU_FEROCEON /* * Asynchronous exception. The instruction is read from FPINST * and the interrupted instruction has to be restarted. */ trigger = fmrx(FPINST); regs->ARM_pc -= 4; +#endif } else if (!(fpexc & FPEXC_DEX)) { /* * Illegal combination of bits. It can be caused by an |