x86: move get_segment_eip() to step.c

get_segment_eip has similarities to convert_rip_to_linear(),
and is used in a similar context.  Move get_segment_eip to
step.c to allow easier consolidation.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

3 files changed, 81 insertions, 154 deletions

diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 21ea22fda5fc..5884dd485db8 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -6,6 +6,87 @@
 #include <linux/ptrace.h>
 
 #ifdef CONFIG_X86_32
+#include <linux/uaccess.h>
+
+#include <asm/desc.h>
+
+/*
+ * Return EIP plus the CS segment base.  The segment limit is also
+ * adjusted, clamped to the kernel/user address space (whichever is
+ * appropriate), and returned in *eip_limit.
+ *
+ * The segment is checked, because it might have been changed by another
+ * task between the original faulting instruction and here.
+ *
+ * If CS is no longer a valid code segment, or if EIP is beyond the
+ * limit, or if it is a kernel address when CS is not a kernel segment,
+ * then the returned value will be greater than *eip_limit.
+ *
+ * This is slow, but is very rarely executed.
+ */
+unsigned long get_segment_eip(struct pt_regs *regs,
+					    unsigned long *eip_limit)
+{
+	unsigned long ip = regs->ip;
+	unsigned seg = regs->cs & 0xffff;
+	u32 seg_ar, seg_limit, base, *desc;
+
+	/* Unlikely, but must come before segment checks. */
+	if (unlikely(regs->flags & VM_MASK)) {
+		base = seg << 4;
+		*eip_limit = base + 0xffff;
+		return base + (ip & 0xffff);
+	}
+
+	/* The standard kernel/user address space limit. */
+	*eip_limit = user_mode(regs) ? USER_DS.seg : KERNEL_DS.seg;
+
+	/* By far the most common cases. */
+	if (likely(SEGMENT_IS_FLAT_CODE(seg)))
+		return ip;
+
+	/* Check the segment exists, is within the current LDT/GDT size,
+	   that kernel/user (ring 0..3) has the appropriate privilege,
+	   that it's a code segment, and get the limit. */
+	__asm__("larl %3,%0; lsll %3,%1"
+		 : "=&r" (seg_ar), "=r" (seg_limit) : "0" (0), "rm" (seg));
+	if ((~seg_ar & 0x9800) || ip > seg_limit) {
+		*eip_limit = 0;
+		return 1;	 /* So that returned ip > *eip_limit. */
+	}
+
+	/* Get the GDT/LDT descriptor base.
+	   When you look for races in this code remember that
+	   LDT and other horrors are only used in user space. */
+	if (seg & (1<<2)) {
+		/* Must lock the LDT while reading it. */
+		mutex_lock(&current->mm->context.lock);
+		desc = current->mm->context.ldt;
+		desc = (void *)desc + (seg & ~7);
+	} else {
+		/* Must disable preemption while reading the GDT. */
+		desc = (u32 *)get_cpu_gdt_table(get_cpu());
+		desc = (void *)desc + (seg & ~7);
+	}
+
+	/* Decode the code segment base from the descriptor */
+	base = get_desc_base((struct desc_struct *)desc);
+
+	if (seg & (1<<2))
+		mutex_unlock(&current->mm->context.lock);
+	else
+		put_cpu();
+
+	/* Adjust EIP and segment limit, and clamp at the kernel limit.
+	   It's legitimate for segments to wrap at 0xffffffff. */
+	seg_limit += base;
+	if (seg_limit < *eip_limit && seg_limit >= base)
+		*eip_limit = seg_limit;
+	return ip + base;
+}
+#endif
+
+#ifdef CONFIG_X86_32
 static
 #endif
 unsigned long convert_rip_to_linear(struct task_struct *child, struct pt_regs *regs)
diff --git a/arch/x86/mm/fault_32.c b/arch/x86/mm/fault_32.c
index 421e276770ad..b92922a1d65f 100644
--- a/arch/x86/mm/fault_32.c
+++ b/arch/x86/mm/fault_32.c
@@ -61,83 +61,6 @@ static inline int notify_page_fault(struct pt_regs *regs)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-/*
- * Return EIP plus the CS segment base.  The segment limit is also
- * adjusted, clamped to the kernel/user address space (whichever is
- * appropriate), and returned in *eip_limit.
- *
- * The segment is checked, because it might have been changed by another
- * task between the original faulting instruction and here.
- *
- * If CS is no longer a valid code segment, or if EIP is beyond the
- * limit, or if it is a kernel address when CS is not a kernel segment,
- * then the returned value will be greater than *eip_limit.
- *
- * This is slow, but is very rarely executed.
- */
-static inline unsigned long get_segment_eip(struct pt_regs *regs,
-					    unsigned long *eip_limit)
-{
-	unsigned long ip = regs->ip;
-	unsigned seg = regs->cs & 0xffff;
-	u32 seg_ar, seg_limit, base, *desc;
-
-	/* Unlikely, but must come before segment checks. */
-	if (unlikely(regs->flags & VM_MASK)) {
-		base = seg << 4;
-		*eip_limit = base + 0xffff;
-		return base + (ip & 0xffff);
-	}
-
-	/* The standard kernel/user address space limit. */
-	*eip_limit = user_mode(regs) ? USER_DS.seg : KERNEL_DS.seg;
-
-	/* By far the most common cases. */
-	if (likely(SEGMENT_IS_FLAT_CODE(seg)))
-		return ip;
-
-	/* Check the segment exists, is within the current LDT/GDT size,
-	   that kernel/user (ring 0..3) has the appropriate privilege,
-	   that it's a code segment, and get the limit. */
-	__asm__ ("larl %3,%0; lsll %3,%1"
-		 : "=&r" (seg_ar), "=r" (seg_limit) : "0" (0), "rm" (seg));
-	if ((~seg_ar & 0x9800) || ip > seg_limit) {
-		*eip_limit = 0;
-		return 1;	 /* So that returned ip > *eip_limit. */
-	}
-
-	/* Get the GDT/LDT descriptor base.
-	   When you look for races in this code remember that
-	   LDT and other horrors are only used in user space. */
-	if (seg & (1<<2)) {
-		/* Must lock the LDT while reading it. */
-		mutex_lock(&current->mm->context.lock);
-		desc = current->mm->context.ldt;
-		desc = (void *)desc + (seg & ~7);
-	} else {
-		/* Must disable preemption while reading the GDT. */
-		desc = (u32 *)get_cpu_gdt_table(get_cpu());
-		desc = (void *)desc + (seg & ~7);
-	}
-
-	/* Decode the code segment base from the descriptor */
-	base = get_desc_base((struct desc_struct *)desc);
-
-	if (seg & (1<<2))
-		mutex_unlock(&current->mm->context.lock);
-	else
-		put_cpu();
-
-	/* Adjust EIP and segment limit, and clamp at the kernel limit.
-	   It's legitimate for segments to wrap at 0xffffffff. */
-	seg_limit += base;
-	if (seg_limit < *eip_limit && seg_limit >= base)
-		*eip_limit = seg_limit;
-	return ip + base;
-}
-#endif
-
 /*
  * X86_32
  * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
diff --git a/arch/x86/mm/fault_64.c b/arch/x86/mm/fault_64.c
index 95f142f5b5cc..e82832961d72 100644
--- a/arch/x86/mm/fault_64.c
+++ b/arch/x86/mm/fault_64.c
@@ -64,83 +64,6 @@ static inline int notify_page_fault(struct pt_regs *regs)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-/*
- * Return EIP plus the CS segment base.  The segment limit is also
- * adjusted, clamped to the kernel/user address space (whichever is
- * appropriate), and returned in *eip_limit.
- *
- * The segment is checked, because it might have been changed by another
- * task between the original faulting instruction and here.
- *
- * If CS is no longer a valid code segment, or if EIP is beyond the
- * limit, or if it is a kernel address when CS is not a kernel segment,
- * then the returned value will be greater than *eip_limit.
- *
- * This is slow, but is very rarely executed.
- */
-static inline unsigned long get_segment_eip(struct pt_regs *regs,
-					    unsigned long *eip_limit)
-{
-	unsigned long ip = regs->ip;
-	unsigned seg = regs->cs & 0xffff;
-	u32 seg_ar, seg_limit, base, *desc;
-
-	/* Unlikely, but must come before segment checks. */
-	if (unlikely(regs->flags & VM_MASK)) {
-		base = seg << 4;
-		*eip_limit = base + 0xffff;
-		return base + (ip & 0xffff);
-	}
-
-	/* The standard kernel/user address space limit. */
-	*eip_limit = user_mode(regs) ? USER_DS.seg : KERNEL_DS.seg;
-
-	/* By far the most common cases. */
-	if (likely(SEGMENT_IS_FLAT_CODE(seg)))
-		return ip;
-
-	/* Check the segment exists, is within the current LDT/GDT size,
-	   that kernel/user (ring 0..3) has the appropriate privilege,
-	   that it's a code segment, and get the limit. */
-	__asm__("larl %3,%0; lsll %3,%1"
-		 : "=&r" (seg_ar), "=r" (seg_limit) : "0" (0), "rm" (seg));
-	if ((~seg_ar & 0x9800) || ip > seg_limit) {
-		*eip_limit = 0;
-		return 1;	 /* So that returned ip > *eip_limit. */
-	}
-
-	/* Get the GDT/LDT descriptor base.
-	   When you look for races in this code remember that
-	   LDT and other horrors are only used in user space. */
-	if (seg & (1<<2)) {
-		/* Must lock the LDT while reading it. */
-		mutex_lock(&current->mm->context.lock);
-		desc = current->mm->context.ldt;
-		desc = (void *)desc + (seg & ~7);
-	} else {
-		/* Must disable preemption while reading the GDT. */
-		desc = (u32 *)get_cpu_gdt_table(get_cpu());
-		desc = (void *)desc + (seg & ~7);
-	}
-
-	/* Decode the code segment base from the descriptor */
-	base = get_desc_base((struct desc_struct *)desc);
-
-	if (seg & (1<<2))
-		mutex_unlock(&current->mm->context.lock);
-	else
-		put_cpu();
-
-	/* Adjust EIP and segment limit, and clamp at the kernel limit.
-	   It's legitimate for segments to wrap at 0xffffffff. */
-	seg_limit += base;
-	if (seg_limit < *eip_limit && seg_limit >= base)
-		*eip_limit = seg_limit;
-	return ip + base;
-}
-#endif
-
 /*
  * X86_32
  * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.