Merge commit 'v2.6.36' into kbuild/misc

Update to be able to fix a recent change to scripts/basic/docproc.c
(commit eda603f).

1 files changed, 2 insertions, 170 deletions

diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt
index eeedee11c8c2..0bf25eebce94 100644
--- a/Documentation/laptops/laptop-mode.txt
+++ b/Documentation/laptops/laptop-mode.txt
@@ -207,7 +207,7 @@ Tips & Tricks
 * Drew Scott Daniels observed: "I don't know why, but when I decrease the number
   of colours that my display uses it consumes less battery power. I've seen
   this on powerbooks too. I hope that this is a piece of information that
-  might be useful to the Laptop Mode patch or it's users."
+  might be useful to the Laptop Mode patch or its users."
 
 * In syslog.conf, you can prefix entries with a dash ``-'' to omit syncing the
   file after every logging. When you're using laptop-mode and your disk doesn't
@@ -779,172 +779,4 @@ Monitoring tool
 ---------------
 
 Bartek Kania submitted this, it can be used to measure how much time your disk
-spends spun up/down.
-
----------------------------dslm.c BEGIN-----------------------------------------
-/*
- * Simple Disk Sleep Monitor
- *  by Bartek Kania
- * Licenced under the GPL
- */
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <time.h>
-#include <string.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <linux/hdreg.h>
-
-#ifdef DEBUG
-#define D(x) x
-#else
-#define D(x)
-#endif
-
-int endit = 0;
-
-/* Check if the disk is in powersave-mode
- * Most of the code is stolen from hdparm.
- * 1 = active, 0 = standby/sleep, -1 = unknown */
-int check_powermode(int fd)
-{
-    unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0};
-    int state;
-
-    if (ioctl(fd, HDIO_DRIVE_CMD, &args)
-	&& (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
-	&& ioctl(fd, HDIO_DRIVE_CMD, &args)) {
-	if (errno != EIO || args[0] != 0 || args[1] != 0) {
-	    state = -1; /* "unknown"; */
-	} else
-	    state = 0; /* "sleeping"; */
-    } else {
-	state = (args[2] == 255) ? 1 : 0;
-    }
-    D(printf(" drive state is:  %d\n", state));
-
-    return state;
-}
-
-char *state_name(int i)
-{
-    if (i == -1) return "unknown";
-    if (i == 0) return "sleeping";
-    if (i == 1) return "active";
-
-    return "internal error";
-}
-
-char *myctime(time_t time)
-{
-    char *ts = ctime(&time);
-    ts[strlen(ts) - 1] = 0;
-
-    return ts;
-}
-
-void measure(int fd)
-{
-    time_t start_time;
-    int last_state;
-    time_t last_time;
-    int curr_state;
-    time_t curr_time = 0;
-    time_t time_diff;
-    time_t active_time = 0;
-    time_t sleep_time = 0;
-    time_t unknown_time = 0;
-    time_t total_time = 0;
-    int changes = 0;
-    float tmp;
-
-    printf("Starting measurements\n");
-
-    last_state = check_powermode(fd);
-    start_time = last_time = time(0);
-    printf("  System is in state %s\n\n", state_name(last_state));
-
-    while(!endit) {
-	sleep(1);
-	curr_state = check_powermode(fd);
-
-	if (curr_state != last_state || endit) {
-	    changes++;
-	    curr_time = time(0);
-	    time_diff = curr_time - last_time;
-
-	    if (last_state == 1) active_time += time_diff;
-	    else if (last_state == 0) sleep_time += time_diff;
-	    else unknown_time += time_diff;
-
-	    last_state = curr_state;
-	    last_time = curr_time;
-
-	    printf("%s: State-change to %s\n", myctime(curr_time),
-		   state_name(curr_state));
-	}
-    }
-    changes--; /* Compensate for SIGINT */
-
-    total_time = time(0) - start_time;
-    printf("\nTotal running time:  %lus\n", curr_time - start_time);
-    printf(" State changed %d times\n", changes);
-
-    tmp = (float)sleep_time / (float)total_time * 100;
-    printf(" Time in sleep state:   %lus (%.2f%%)\n", sleep_time, tmp);
-    tmp = (float)active_time / (float)total_time * 100;
-    printf(" Time in active state:  %lus (%.2f%%)\n", active_time, tmp);
-    tmp = (float)unknown_time / (float)total_time * 100;
-    printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp);
-}
-
-void ender(int s)
-{
-    endit = 1;
-}
-
-void usage()
-{
-    puts("usage: dslm [-w <time>] <disk>");
-    exit(0);
-}
-
-int main(int argc, char **argv)
-{
-    int fd;
-    char *disk = 0;
-    int settle_time = 60;
-
-    /* Parse the simple command-line */
-    if (argc == 2)
-	disk = argv[1];
-    else if (argc == 4) {
-	settle_time = atoi(argv[2]);
-	disk = argv[3];
-    } else
-	usage();
-
-    if (!(fd = open(disk, O_RDONLY|O_NONBLOCK))) {
-	printf("Can't open %s, because: %s\n", disk, strerror(errno));
-	exit(-1);
-    }
-
-    if (settle_time) {
-	printf("Waiting %d seconds for the system to settle down to "
-	       "'normal'\n", settle_time);
-	sleep(settle_time);
-    } else
-	puts("Not waiting for system to settle down");
-
-    signal(SIGINT, ender);
-
-    measure(fd);
-
-    close(fd);
-
-    return 0;
-}
----------------------------dslm.c END-------------------------------------------
+spends spun up/down.  See Documentation/laptops/dslm.c