summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-05-21 10:48:48 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-05-21 10:48:48 -0700
commit7f02ab3ce3c7e093c414fcbd93bdc591cc4419d0 (patch)
treeb92453c1b0aa1234330855c5ac96627ebe8c82da
parentd6fb1db02e02aea98f2d7e121fd30e24c84639d6 (diff)
parent0dbb5671921b6dad2396090ef81a3efee1ae7da1 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (25 commits) serial: Tidy REMOTE_DEBUG serial: isicomm: handle running out of slots serial: bfin_sport_uart: Use resource size to fix off-by-one error tty: fix obsolete comment on tty_insert_flip_string_fixed_flag serial: Add driver for the Altera UART serial: Add driver for the Altera JTAG UART serial: timbuart: make sure last byte is sent when port is closed serial: two branches the same in timbuart_set_mctrl() serial: uartlite: move from byte accesses to word accesses tty: n_gsm: depends on NET tty: n_gsm line discipline serial: TTY: new ldiscs for staging serial: bfin_sport_uart: drop redundant cpu depends serial: bfin_sport_uart: drop the experimental markings serial: bfin_sport_uart: pull in bfin_sport.h for SPORT defines serial: bfin_sport_uart: only enable SPORT TX if data is to be sent serial: bfin_sport_uart: drop useless status masks serial: bfin_sport_uart: zero sport_uart_port if allocated dynamically serial: bfin_sport_uart: protect changes to uart_port serial: bfin_sport_uart: add support for CTS/RTS via GPIOs ...
-rw-r--r--drivers/char/Kconfig10
-rw-r--r--drivers/char/Makefile1
-rw-r--r--drivers/char/isicom.c8
-rw-r--r--drivers/char/n_gsm.c2763
-rw-r--r--drivers/char/serial167.c223
-rw-r--r--drivers/char/tty_buffer.c2
-rw-r--r--drivers/serial/Kconfig82
-rw-r--r--drivers/serial/Makefile2
-rw-r--r--drivers/serial/altera_jtaguart.c504
-rw-r--r--drivers/serial/altera_uart.c570
-rw-r--r--drivers/serial/bfin_sport_uart.c209
-rw-r--r--drivers/serial/bfin_sport_uart.h27
-rw-r--r--drivers/serial/timbuart.c25
-rw-r--r--drivers/serial/uartlite.c32
-rw-r--r--include/linux/altera_jtaguart.h16
-rw-r--r--include/linux/altera_uart.h14
-rw-r--r--include/linux/gsmmux.h25
-rw-r--r--include/linux/serial_core.h4
-rw-r--r--include/linux/tty.h3
19 files changed, 4196 insertions, 324 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 3141dd3b6e53..e21175be25d0 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -276,11 +276,19 @@ config N_HDLC
Allows synchronous HDLC communications with tty device drivers that
support synchronous HDLC such as the Microgate SyncLink adapter.
- This driver can only be built as a module ( = code which can be
+ This driver can be built as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called n_hdlc. If you want to do that, say M
here.
+config N_GSM
+ tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on NET
+ help
+ This line discipline provides support for the GSM MUX protocol and
+ presents the mux as a set of 61 individual tty devices.
+
config RISCOM8
tristate "SDL RISCom/8 card support"
depends on SERIAL_NONSTANDARD
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index f957edf7e45d..d39be4cf1f5d 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_SYNCLINK) += synclink.o
obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
obj-$(CONFIG_N_HDLC) += n_hdlc.o
+obj-$(CONFIG_N_GSM) += n_gsm.o
obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
obj-$(CONFIG_SX) += sx.o generic_serial.o
obj-$(CONFIG_RIO) += rio/ generic_serial.o
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index c1ab303455cf..98310e1aae30 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -1573,11 +1573,16 @@ static int __devinit isicom_probe(struct pci_dev *pdev,
dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
/* allot the first empty slot in the array */
- for (index = 0; index < BOARD_COUNT; index++)
+ for (index = 0; index < BOARD_COUNT; index++) {
if (isi_card[index].base == 0) {
board = &isi_card[index];
break;
}
+ }
+ if (index == BOARD_COUNT) {
+ retval = -ENODEV;
+ goto err_disable;
+ }
board->index = index;
board->base = pci_resource_start(pdev, 3);
@@ -1624,6 +1629,7 @@ errunrr:
errdec:
board->base = 0;
card_count--;
+err_disable:
pci_disable_device(pdev);
err:
return retval;
diff --git a/drivers/char/n_gsm.c b/drivers/char/n_gsm.c
new file mode 100644
index 000000000000..c4161d5e053d
--- /dev/null
+++ b/drivers/char/n_gsm.c
@@ -0,0 +1,2763 @@
+/*
+ * n_gsm.c GSM 0710 tty multiplexor
+ * Copyright (c) 2009/10 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * * THIS IS A DEVELOPMENT SNAPSHOT IT IS NOT A FINAL RELEASE *
+ *
+ * TO DO:
+ * Mostly done: ioctls for setting modes/timing
+ * Partly done: hooks so you can pull off frames to non tty devs
+ * Restart DLCI 0 when it closes ?
+ * Test basic encoding
+ * Improve the tx engine
+ * Resolve tx side locking by adding a queue_head and routing
+ * all control traffic via it
+ * General tidy/document
+ * Review the locking/move to refcounts more (mux now moved to an
+ * alloc/free model ready)
+ * Use newest tty open/close port helpers and install hooks
+ * What to do about power functions ?
+ * Termios setting and negotiation
+ * Do we need a 'which mux are you' ioctl to correlate mux and tty sets
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fcntl.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/bitops.h>
+#include <linux/file.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/tty_flip.h>
+#include <linux/tty_driver.h>
+#include <linux/serial.h>
+#include <linux/kfifo.h>
+#include <linux/skbuff.h>
+#include <linux/gsmmux.h>
+
+static int debug;
+module_param(debug, int, 0600);
+
+#define T1 (HZ/10)
+#define T2 (HZ/3)
+#define N2 3
+
+/* Use long timers for testing at low speed with debug on */
+#ifdef DEBUG_TIMING
+#define T1 HZ
+#define T2 (2 * HZ)
+#endif
+
+/* Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
+ limits so this is plenty */
+#define MAX_MRU 512
+#define MAX_MTU 512
+
+/*
+ * Each block of data we have queued to go out is in the form of
+ * a gsm_msg which holds everything we need in a link layer independant
+ * format
+ */
+
+struct gsm_msg {
+ struct gsm_msg *next;
+ u8 addr; /* DLCI address + flags */
+ u8 ctrl; /* Control byte + flags */
+ unsigned int len; /* Length of data block (can be zero) */
+ unsigned char *data; /* Points into buffer but not at the start */
+ unsigned char buffer[0];
+};
+
+/*
+ * Each active data link has a gsm_dlci structure associated which ties
+ * the link layer to an optional tty (if the tty side is open). To avoid
+ * complexity right now these are only ever freed up when the mux is
+ * shut down.
+ *
+ * At the moment we don't free DLCI objects until the mux is torn down
+ * this avoid object life time issues but might be worth review later.
+ */
+
+struct gsm_dlci {
+ struct gsm_mux *gsm;
+ int addr;
+ int state;
+#define DLCI_CLOSED 0
+#define DLCI_OPENING 1 /* Sending SABM not seen UA */
+#define DLCI_OPEN 2 /* SABM/UA complete */
+#define DLCI_CLOSING 3 /* Sending DISC not seen UA/DM */
+
+ /* Link layer */
+ spinlock_t lock; /* Protects the internal state */
+ struct timer_list t1; /* Retransmit timer for SABM and UA */
+ int retries;
+ /* Uplink tty if active */
+ struct tty_port port; /* The tty bound to this DLCI if there is one */
+ struct kfifo *fifo; /* Queue fifo for the DLCI */
+ struct kfifo _fifo; /* For new fifo API porting only */
+ int adaption; /* Adaption layer in use */
+ u32 modem_rx; /* Our incoming virtual modem lines */
+ u32 modem_tx; /* Our outgoing modem lines */
+ int dead; /* Refuse re-open */
+ /* Flow control */
+ int throttled; /* Private copy of throttle state */
+ int constipated; /* Throttle status for outgoing */
+ /* Packetised I/O */
+ struct sk_buff *skb; /* Frame being sent */
+ struct sk_buff_head skb_list; /* Queued frames */
+ /* Data handling callback */
+ void (*data)(struct gsm_dlci *dlci, u8 *data, int len);
+};
+
+/* DLCI 0, 62/63 are special or reseved see gsmtty_open */
+
+#define NUM_DLCI 64
+
+/*
+ * DLCI 0 is used to pass control blocks out of band of the data
+ * flow (and with a higher link priority). One command can be outstanding
+ * at a time and we use this structure to manage them. They are created
+ * and destroyed by the user context, and updated by the receive paths
+ * and timers
+ */
+
+struct gsm_control {
+ u8 cmd; /* Command we are issuing */
+ u8 *data; /* Data for the command in case we retransmit */
+ int len; /* Length of block for retransmission */
+ int done; /* Done flag */
+ int error; /* Error if any */
+};
+
+/*
+ * Each GSM mux we have is represented by this structure. If we are
+ * operating as an ldisc then we use this structure as our ldisc
+ * state. We need to sort out lifetimes and locking with respect
+ * to the gsm mux array. For now we don't free DLCI objects that
+ * have been instantiated until the mux itself is terminated.
+ *
+ * To consider further: tty open versus mux shutdown.
+ */
+
+struct gsm_mux {
+ struct tty_struct *tty; /* The tty our ldisc is bound to */
+ spinlock_t lock;
+
+ /* Events on the GSM channel */
+ wait_queue_head_t event;
+
+ /* Bits for GSM mode decoding */
+
+ /* Framing Layer */
+ unsigned char *buf;
+ int state;
+#define GSM_SEARCH 0
+#define GSM_START 1
+#define GSM_ADDRESS 2
+#define GSM_CONTROL 3
+#define GSM_LEN 4
+#define GSM_DATA 5
+#define GSM_FCS 6
+#define GSM_OVERRUN 7
+ unsigned int len;
+ unsigned int address;
+ unsigned int count;
+ int escape;
+ int encoding;
+ u8 control;
+ u8 fcs;
+ u8 *txframe; /* TX framing buffer */
+
+ /* Methods for the receiver side */
+ void (*receive)(struct gsm_mux *gsm, u8 ch);
+ void (*error)(struct gsm_mux *gsm, u8 ch, u8 flag);
+ /* And transmit side */
+ int (*output)(struct gsm_mux *mux, u8 *data, int len);
+
+ /* Link Layer */
+ unsigned int mru;
+ unsigned int mtu;
+ int initiator; /* Did we initiate connection */
+ int dead; /* Has the mux been shut down */
+ struct gsm_dlci *dlci[NUM_DLCI];
+ int constipated; /* Asked by remote to shut up */
+
+ spinlock_t tx_lock;
+ unsigned int tx_bytes; /* TX data outstanding */
+#define TX_THRESH_HI 8192
+#define TX_THRESH_LO 2048
+ struct gsm_msg *tx_head; /* Pending data packets */
+ struct gsm_msg *tx_tail;
+
+ /* Control messages */
+ struct timer_list t2_timer; /* Retransmit timer for commands */
+ int cretries; /* Command retry counter */
+ struct gsm_control *pending_cmd;/* Our current pending command */
+ spinlock_t control_lock; /* Protects the pending command */
+
+ /* Configuration */
+ int adaption; /* 1 or 2 supported */
+ u8 ftype; /* UI or UIH */
+ int t1, t2; /* Timers in 1/100th of a sec */
+ int n2; /* Retry count */
+
+ /* Statistics (not currently exposed) */
+ unsigned long bad_fcs;
+ unsigned long malformed;
+ unsigned long io_error;
+ unsigned long bad_size;
+ unsigned long unsupported;
+};
+
+
+/*
+ * Mux objects - needed so that we can translate a tty index into the
+ * relevant mux and DLCI.
+ */
+
+#define MAX_MUX 4 /* 256 minors */
+static struct gsm_mux *gsm_mux[MAX_MUX]; /* GSM muxes */
+static spinlock_t gsm_mux_lock;
+
+/*
+ * This section of the driver logic implements the GSM encodings
+ * both the basic and the 'advanced'. Reliable transport is not
+ * supported.
+ */
+
+#define CR 0x02
+#define EA 0x01
+#define PF 0x10
+
+/* I is special: the rest are ..*/
+#define RR 0x01
+#define UI 0x03
+#define RNR 0x05
+#define REJ 0x09
+#define DM 0x0F
+#define SABM 0x2F
+#define DISC 0x43
+#define UA 0x63
+#define UIH 0xEF
+
+/* Channel commands */
+#define CMD_NSC 0x09
+#define CMD_TEST 0x11
+#define CMD_PSC 0x21
+#define CMD_RLS 0x29
+#define CMD_FCOFF 0x31
+#define CMD_PN 0x41
+#define CMD_RPN 0x49
+#define CMD_FCON 0x51
+#define CMD_CLD 0x61
+#define CMD_SNC 0x69
+#define CMD_MSC 0x71
+
+/* Virtual modem bits */
+#define MDM_FC 0x01
+#define MDM_RTC 0x02
+#define MDM_RTR 0x04
+#define MDM_IC 0x20
+#define MDM_DV 0x40
+
+#define GSM0_SOF 0xF9
+#define GSM1_SOF 0x7E
+#define GSM1_ESCAPE 0x7D
+#define GSM1_ESCAPE_BITS 0x20
+#define XON 0x11
+#define XOFF 0x13
+
+static const struct tty_port_operations gsm_port_ops;
+
+/*
+ * CRC table for GSM 0710
+ */
+
+static const u8 gsm_fcs8[256] = {
+ 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75,
+ 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
+ 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69,
+ 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
+ 0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D,
+ 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
+ 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51,
+ 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
+ 0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05,
+ 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
+ 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19,
+ 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
+ 0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D,
+ 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
+ 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21,
+ 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
+ 0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95,
+ 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
+ 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89,
+ 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
+ 0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD,
+ 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
+ 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1,
+ 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
+ 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5,
+ 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
+ 0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9,
+ 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
+ 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD,
+ 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
+ 0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1,
+ 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
+};
+
+#define INIT_FCS 0xFF
+#define GOOD_FCS 0xCF
+
+/**
+ * gsm_fcs_add - update FCS
+ * @fcs: Current FCS
+ * @c: Next data
+ *
+ * Update the FCS to include c. Uses the algorithm in the specification
+ * notes.
+ */
+
+static inline u8 gsm_fcs_add(u8 fcs, u8 c)
+{
+ return gsm_fcs8[fcs ^ c];
+}
+
+/**
+ * gsm_fcs_add_block - update FCS for a block
+ * @fcs: Current FCS
+ * @c: buffer of data
+ * @len: length of buffer
+ *
+ * Update the FCS to include c. Uses the algorithm in the specification
+ * notes.
+ */
+
+static inline u8 gsm_fcs_add_block(u8 fcs, u8 *c, int len)
+{
+ while (len--)
+ fcs = gsm_fcs8[fcs ^ *c++];
+ return fcs;
+}
+
+/**
+ * gsm_read_ea - read a byte into an EA
+ * @val: variable holding value
+ * c: byte going into the EA
+ *
+ * Processes one byte of an EA. Updates the passed variable
+ * and returns 1 if the EA is now completely read
+ */
+
+static int gsm_read_ea(unsigned int *val, u8 c)
+{
+ /* Add the next 7 bits into the value */
+ *val <<= 7;
+ *val |= c >> 1;
+ /* Was this the last byte of the EA 1 = yes*/
+ return c & EA;
+}
+
+/**
+ * gsm_encode_modem - encode modem data bits
+ * @dlci: DLCI to encode from
+ *
+ * Returns the correct GSM encoded modem status bits (6 bit field) for
+ * the current status of the DLCI and attached tty object
+ */
+
+static u8 gsm_encode_modem(const struct gsm_dlci *dlci)
+{
+ u8 modembits = 0;
+ /* FC is true flow control not modem bits */
+ if (dlci->throttled)
+ modembits |= MDM_FC;
+ if (dlci->modem_tx & TIOCM_DTR)
+ modembits |= MDM_RTC;
+ if (dlci->modem_tx & TIOCM_RTS)
+ modembits |= MDM_RTR;
+ if (dlci->modem_tx & TIOCM_RI)
+ modembits |= MDM_IC;
+ if (dlci->modem_tx & TIOCM_CD)
+ modembits |= MDM_DV;
+ return modembits;
+}
+
+/**
+ * gsm_print_packet - display a frame for debug
+ * @hdr: header to print before decode
+ * @addr: address EA from the frame
+ * @cr: C/R bit from the frame
+ * @control: control including PF bit
+ * @data: following data bytes
+ * @dlen: length of data
+ *
+ * Displays a packet in human readable format for debugging purposes. The
+ * style is based on amateur radio LAP-B dump display.
+ */
+
+static void gsm_print_packet(const char *hdr, int addr, int cr,
+ u8 control, const u8 *data, int dlen)
+{
+ if (!(debug & 1))
+ return;
+
+ printk(KERN_INFO "%s %d) %c: ", hdr, addr, "RC"[cr]);
+
+ switch (control & ~PF) {
+ case SABM:
+ printk(KERN_CONT "SABM");
+ break;
+ case UA:
+ printk(KERN_CONT "UA");
+ break;
+ case DISC:
+ printk(KERN_CONT "DISC");
+ break;
+ case DM:
+ printk(KERN_CONT "DM");
+ break;
+ case UI:
+ printk(KERN_CONT "UI");
+ break;
+ case UIH:
+ printk(KERN_CONT "UIH");
+ break;
+ default:
+ if (!(control & 0x01)) {
+ printk(KERN_CONT "I N(S)%d N(R)%d",
+ (control & 0x0E) >> 1, (control & 0xE)>> 5);
+ } else switch (control & 0x0F) {
+ case RR:
+ printk("RR(%d)", (control & 0xE0) >> 5);
+ break;
+ case RNR:
+ printk("RNR(%d)", (control & 0xE0) >> 5);
+ break;
+ case REJ:
+ printk("REJ(%d)", (control & 0xE0) >> 5);
+ break;
+ default:
+ printk(KERN_CONT "[%02X]", control);
+ }
+ }
+
+ if (control & PF)
+ printk(KERN_CONT "(P)");
+ else
+ printk(KERN_CONT "(F)");
+
+ if (dlen) {
+ int ct = 0;
+ while (dlen--) {
+ if (ct % 8 == 0)
+ printk(KERN_CONT "\n ");
+ printk(KERN_CONT "%02X ", *data++);
+ ct++;
+ }
+ }
+ printk(KERN_CONT "\n");
+}
+
+
+/*
+ * Link level transmission side
+ */
+
+/**
+ * gsm_stuff_packet - bytestuff a packet
+ * @ibuf: input
+ * @obuf: output
+ * @len: length of input
+ *
+ * Expand a buffer by bytestuffing it. The worst case size change
+ * is doubling and the caller is responsible for handing out
+ * suitable sized buffers.
+ */
+
+static int gsm_stuff_frame(const u8 *input, u8 *output, int len)
+{
+ int olen = 0;
+ while (len--) {
+ if (*input == GSM1_SOF || *input == GSM1_ESCAPE
+ || *input == XON || *input == XOFF) {
+ *output++ = GSM1_ESCAPE;
+ *output++ = *input++ ^ GSM1_ESCAPE_BITS;
+ olen++;
+ } else
+ *output++ = *input++;
+ olen++;
+ }
+ return olen;
+}
+
+static void hex_packet(const unsigned char *p, int len)
+{
+ int i;
+ for (i = 0; i < len; i++) {
+ if (i && (i % 16) == 0)
+ printk("\n");
+ printk("%02X ", *p++);
+ }
+ printk("\n");
+}
+
+/**
+ * gsm_send - send a control frame
+ * @gsm: our GSM mux
+ * @addr: address for control frame
+ * @cr: command/response bit
+ * @control: control byte including PF bit
+ *
+ * Format up and transmit a control frame. These do not go via the
+ * queueing logic as they should be transmitted ahead of data when
+ * they are needed.
+ *
+ * FIXME: Lock versus data TX path
+ */
+
+static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
+{
+ int len;
+ u8 cbuf[10];
+ u8 ibuf[3];
+
+ switch (gsm->encoding) {
+ case 0:
+ cbuf[0] = GSM0_SOF;
+ cbuf[1] = (addr << 2) | (cr << 1) | EA;
+ cbuf[2] = control;
+ cbuf[3] = EA; /* Length of data = 0 */
+ cbuf[4] = 0xFF - gsm_fcs_add_block(INIT_FCS, cbuf + 1, 3);
+ cbuf[5] = GSM0_SOF;
+ len = 6;
+ break;
+ case 1:
+ case 2:
+ /* Control frame + packing (but not frame stuffing) in mode 1 */
+ ibuf[0] = (addr << 2) | (cr << 1) | EA;
+ ibuf[1] = control;
+ ibuf[2] = 0xFF - gsm_fcs_add_block(INIT_FCS, ibuf, 2);
+ /* Stuffing may double the size worst case */
+ len = gsm_stuff_frame(ibuf, cbuf + 1, 3);
+ /* Now add the SOF markers */
+ cbuf[0] = GSM1_SOF;
+ cbuf[len + 1] = GSM1_SOF;
+ /* FIXME: we can omit the lead one in many cases */
+ len += 2;
+ break;
+ default:
+ WARN_ON(1);
+ return;
+ }
+ gsm->output(gsm, cbuf, len);
+ gsm_print_packet("-->", addr, cr, control, NULL, 0);
+}
+
+/**
+ * gsm_response - send a control response
+ * @gsm: our GSM mux
+ * @addr: address for control frame
+ * @control: control byte including PF bit
+ *
+ * Format up and transmit a link level response frame.
+ */
+
+static inline void gsm_response(struct gsm_mux *gsm, int addr, int control)
+{
+ gsm_send(gsm, addr, 0, control);
+}
+
+/**
+ * gsm_command - send a control command
+ * @gsm: our GSM mux
+ * @addr: address for control frame
+ * @control: control byte including PF bit
+ *
+ * Format up and transmit a link level command frame.
+ */
+
+static inline void gsm_command(struct gsm_mux *gsm, int addr, int control)
+{
+ gsm_send(gsm, addr, 1, control);
+}
+
+/* Data transmission */
+
+#define HDR_LEN 6 /* ADDR CTRL [LEN.2] DATA FCS */
+
+/**
+ * gsm_data_alloc - allocate data frame
+ * @gsm: GSM mux
+ * @addr: DLCI address
+ * @len: length excluding header and FCS
+ * @ctrl: control byte
+ *
+ * Allocate a new data buffer for sending frames with data. Space is left
+ * at the front for header bytes but that is treated as an implementation
+ * detail and not for the high level code to use
+ */
+
+static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
+ u8 ctrl)
+{
+ struct gsm_msg *m = kmalloc(sizeof(struct gsm_msg) + len + HDR_LEN,
+ GFP_ATOMIC);
+ if (m == NULL)
+ return NULL;
+ m->data = m->buffer + HDR_LEN - 1; /* Allow for FCS */
+ m->len = len;
+ m->addr = addr;
+ m->ctrl = ctrl;
+ m->next = NULL;
+ return m;
+}
+
+/**
+ * gsm_data_kick - poke the queue
+ * @gsm: GSM Mux
+ *
+ * The tty device has called us to indicate that room has appeared in
+ * the transmit queue. Ram more data into the pipe if we have any
+ *
+ * FIXME: lock against link layer control transmissions
+ */
+
+static void gsm_data_kick(struct gsm_mux *gsm)
+{
+ struct gsm_msg *msg = gsm->tx_head;
+ int len;
+ int skip_sof = 0;
+
+ /* FIXME: We need to apply this solely to data messages */
+ if (gsm->constipated)
+ return;
+
+ while (gsm->tx_head != NULL) {
+ msg = gsm->tx_head;
+ if (gsm->encoding != 0) {
+ gsm->txframe[0] = GSM1_SOF;
+ len = gsm_stuff_frame(msg->data,
+ gsm->txframe + 1, msg->len);
+ gsm->txframe[len + 1] = GSM1_SOF;
+ len += 2;
+ } else {
+ gsm->txframe[0] = GSM0_SOF;
+ memcpy(gsm->txframe + 1 , msg->data, msg->len);
+ gsm->txframe[msg->len + 1] = GSM0_SOF;
+ len = msg->len + 2;
+ }
+
+ if (debug & 4) {
+ printk("gsm_data_kick: \n");
+ hex_packet(gsm->txframe, len);
+ }
+
+ if (gsm->output(gsm, gsm->txframe + skip_sof,
+ len - skip_sof) < 0)
+ break;
+ /* FIXME: Can eliminate one SOF in many more cases */
+ gsm->tx_head = msg->next;
+ if (gsm->tx_head == NULL)
+ gsm->tx_tail = NULL;
+ gsm->tx_bytes -= msg->len;
+ kfree(msg);
+ /* For a burst of frames skip the extra SOF within the
+ burst */
+ skip_sof = 1;
+ }
+}
+
+/**
+ * __gsm_data_queue - queue a UI or UIH frame
+ * @dlci: DLCI sending the data
+ * @msg: message queued
+ *
+ * Add data to the transmit queue and try and get stuff moving
+ * out of the mux tty if not already doing so. The Caller must hold
+ * the gsm tx lock.
+ */
+
+static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
+{
+ struct gsm_mux *gsm = dlci->gsm;
+ u8 *dp = msg->data;
+ u8 *fcs = dp + msg->len;
+
+ /* Fill in the header */
+ if (gsm->encoding == 0) {
+ if (msg->len < 128)
+ *--dp = (msg->len << 1) | EA;
+ else {
+ *--dp = (msg->len >> 6) | EA;
+ *--dp = (msg->len & 127) << 1;
+ }
+ }
+
+ *--dp = msg->ctrl;
+ if (gsm->initiator)
+ *--dp = (msg->addr << 2) | 2 | EA;
+ else
+ *--dp = (msg->addr << 2) | EA;
+ *fcs = gsm_fcs_add_block(INIT_FCS, dp , msg->data - dp);
+ /* Ugly protocol layering violation */
+ if (msg->ctrl == UI || msg->ctrl == (UI|PF))
+ *fcs = gsm_fcs_add_block(*fcs, msg->data, msg->len);
+ *fcs = 0xFF - *fcs;
+
+ gsm_print_packet("Q> ", msg->addr, gsm->initiator, msg->ctrl,
+ msg->data, msg->len);
+
+ /* Move the header back and adjust the length, also allow for the FCS
+ now tacked on the end */
+ msg->len += (msg->data - dp) + 1;
+ msg->data = dp;
+
+ /* Add to the actual output queue */
+ if (gsm->tx_tail)
+ gsm->tx_tail->next = msg;
+ else
+ gsm->tx_head = msg;
+ gsm->tx_tail = msg;
+ gsm->tx_bytes += msg->len;
+ gsm_data_kick(gsm);
+}
+
+/**
+ * gsm_data_queue - queue a UI or UIH frame
+ * @dlci: DLCI sending the data
+ * @msg: message queued
+ *
+ * Add data to the transmit queue and try and get stuff moving
+ * out of the mux tty if not already doing so. Take the
+ * the gsm tx lock and dlci lock.
+ */
+
+static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
+ __gsm_data_queue(dlci, msg);
+ spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
+}
+
+/**
+ * gsm_dlci_data_output - try and push data out of a DLCI
+ * @gsm: mux
+ * @dlci: the DLCI to pull data from
+ *
+ * Pull data from a DLCI and send it into the transmit queue if there
+ * is data. Keep to the MRU of the mux. This path handles the usual tty
+ * interface which is a byte stream with optional modem data.
+ *
+ * Caller must hold the tx_lock of the mux.
+ */
+
+static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
+{
+ struct gsm_msg *msg;
+ u8 *dp;
+ int len, size;
+ int h = dlci->adaption - 1;
+
+ len = kfifo_len(dlci->fifo);
+ if (len == 0)
+ return 0;
+
+ /* MTU/MRU count only the data bits */
+ if (len > gsm->mtu)
+ len = gsm->mtu;
+
+ size = len + h;
+
+ msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+ /* FIXME: need a timer or something to kick this so it can't
+ get stuck with no work outstanding and no buffer free */
+ if (msg == NULL)
+ return -ENOMEM;
+ dp = msg->data;
+ switch (dlci->adaption) {
+ case 1: /* Unstructured */
+ break;
+ case 2: /* Unstructed with modem bits. Always one byte as we never
+ send inline break data */
+ *dp += gsm_encode_modem(dlci);
+ len--;
+ break;
+ }
+ WARN_ON(kfifo_out_locked(dlci->fifo, dp , len, &dlci->lock) != len);
+ __gsm_data_queue(dlci, msg);
+ /* Bytes of data we used up */
+ return size;
+}
+
+/**
+ * gsm_dlci_data_output_framed - try and push data out of a DLCI
+ * @gsm: mux
+ * @dlci: the DLCI to pull data from
+ *
+ * Pull data from a DLCI and send it into the transmit queue if there
+ * is data. Keep to the MRU of the mux. This path handles framed data
+ * queued as skbuffs to the DLCI.
+ *
+ * Caller must hold the tx_lock of the mux.
+ */
+
+static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
+ struct gsm_dlci *dlci)
+{
+ struct gsm_msg *msg;
+ u8 *dp;
+ int len, size;
+ int last = 0, first = 0;
+ int overhead = 0;
+
+ /* One byte per frame is used for B/F flags */
+ if (dlci->adaption == 4)
+ overhead = 1;
+
+ /* dlci->skb is locked by tx_lock */
+ if (dlci->skb == NULL) {
+ dlci->skb = skb_dequeue(&dlci->skb_list);
+ if (dlci->skb == NULL)
+ return 0;
+ first = 1;
+ }
+ len = dlci->skb->len + overhead;
+
+ /* MTU/MRU count only the data bits */
+ if (len > gsm->mtu) {
+ if (dlci->adaption == 3) {
+ /* Over long frame, bin it */
+ kfree_skb(dlci->skb);
+ dlci->skb = NULL;
+ return 0;
+ }
+ len = gsm->mtu;
+ } else
+ last = 1;
+
+ size = len + overhead;
+ msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+
+ /* FIXME: need a timer or something to kick this so it can't
+ get stuck with no work outstanding and no buffer free */
+ if (msg == NULL)
+ return -ENOMEM;
+ dp = msg->data;
+
+ if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */
+ /* Flag byte to carry the start/end info */
+ *dp++ = last << 7 | first << 6 | 1; /* EA */
+ len--;
+ }
+ memcpy(dp, skb_pull(dlci->skb, len), len);
+ __gsm_data_queue(dlci, msg);
+ if (last)
+ dlci->skb = NULL;
+ return size;
+}
+
+/**
+ * gsm_dlci_data_sweep - look for data to send
+ * @gsm: the GSM mux
+ *
+ * Sweep the GSM mux channels in priority order looking for ones with
+ * data to send. We could do with optimising this scan a bit. We aim
+ * to fill the queue totally or up to TX_THRESH_HI bytes. Once we hit
+ * TX_THRESH_LO we get called again
+ *
+ * FIXME: We should round robin between groups and in theory you can
+ * renegotiate DLCI priorities with optional stuff. Needs optimising.
+ */
+
+static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
+{
+ int len;
+ /* Priority ordering: We should do priority with RR of the groups */
+ int i = 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gsm->tx_lock, flags);
+ while (i < NUM_DLCI) {
+ struct gsm_dlci *dlci;
+
+ if (gsm->tx_bytes > TX_THRESH_HI)
+ break;
+ dlci = gsm->dlci[i];
+ if (dlci == NULL || dlci->constipated) {
+ i++;
+ continue;
+ }
+ if (dlci->adaption < 3)
+ len = gsm_dlci_data_output(gsm, dlci);
+ else
+ len = gsm_dlci_data_output_framed(gsm, dlci);
+ if (len < 0)
+ return;
+ /* DLCI empty - try the next */
+ if (len == 0)
+ i++;
+ }
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
+}
+
+/**
+ * gsm_dlci_data_kick - transmit if possible
+ * @dlci: DLCI to kick
+ *
+ * Transmit data from this DLCI if the queue is empty. We can't rely on
+ * a tty wakeup except when we filled the pipe so we need to fire off
+ * new data ourselves in other cases.
+ */
+
+static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
+ /* If we have nothing running then we need to fire up */
+ if (dlci->gsm->tx_bytes == 0)
+ gsm_dlci_data_output(dlci->gsm, dlci);
+ else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
+ gsm_dlci_data_sweep(dlci->gsm);
+ spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
+}
+
+/*
+ * Control message processing
+ */
+
+
+/**
+ * gsm_control_reply - send a response frame to a control
+ * @gsm: gsm channel
+ * @cmd: the command to use
+ * @data: data to follow encoded info
+ * @dlen: length of data
+ *
+ * Encode up and queue a UI/UIH frame containing our response.
+ */
+
+static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data,
+ int dlen)
+{
+ struct gsm_msg *msg;
+ msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->ftype);
+ msg->data[0] = (cmd & 0xFE) << 1 | EA; /* Clear C/R */
+ msg->data[1] = (dlen << 1) | EA;
+ memcpy(msg->data + 2, data, dlen);
+ gsm_data_queue(gsm->dlci[0], msg);
+}
+
+/**
+ * gsm_process_modem - process received modem status
+ * @tty: virtual tty bound to the DLCI
+ * @dlci: DLCI to affect
+ * @modem: modem bits (full EA)
+ *
+ * Used when a modem control message or line state inline in adaption
+ * layer 2 is processed. Sort out the local modem state and throttles
+ */
+
+static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
+ u32 modem)
+{
+ int mlines = 0;
+ u8 brk = modem >> 6;
+
+ /* Flow control/ready to communicate */
+ if (modem & MDM_FC) {
+ /* Need to throttle our output on this device */
+ dlci->constipated = 1;
+ }
+ if (modem & MDM_RTC) {
+ mlines |= TIOCM_DSR | TIOCM_DTR;
+ dlci->constipated = 0;
+ gsm_dlci_data_kick(dlci);
+ }
+ /* Map modem bits */
+ if (modem & MDM_RTR)
+ mlines |= TIOCM_RTS | TIOCM_CTS;
+ if (modem & MDM_IC)
+ mlines |= TIOCM_RI;
+ if (modem & MDM_DV)
+ mlines |= TIOCM_CD;
+
+ /* Carrier drop -> hangup */
+ if (tty) {
+ if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD))
+ if (!(tty->termios->c_cflag & CLOCAL))
+ tty_hangup(tty);
+ if (brk & 0x01)
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
+ }
+ dlci->modem_rx = mlines;
+}
+
+/**
+ * gsm_control_modem - modem status received
+ * @gsm: GSM channel
+ * @data: data following command
+ * @clen: command length
+ *
+ * We have received a modem status control message. This is used by
+ * the GSM mux protocol to pass virtual modem line status and optionally
+ * to indicate break signals. Unpack it, convert to Linux representation
+ * and if need be stuff a break message down the tty.
+ */
+
+static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
+{
+ unsigned int addr = 0;
+ unsigned int modem = 0;
+ struct gsm_dlci *dlci;
+ int len = clen;
+ u8 *dp = data;
+ struct tty_struct *tty;
+
+ while (gsm_read_ea(&addr, *dp++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ /* Must be at least one byte following the EA */
+ len--;
+ if (len <= 0)
+ return;
+
+ addr >>= 1;
+ /* Closed port, or invalid ? */
+ if (addr == 0 || addr >= NUM_DLCI || gsm->dlci[addr] == NULL)
+ return;
+ dlci = gsm->dlci[addr];
+
+ while (gsm_read_ea(&modem, *dp++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ tty = tty_port_tty_get(&dlci->port);
+ gsm_process_modem(tty, dlci, modem);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
+ gsm_control_reply(gsm, CMD_MSC, data, clen);
+}
+
+/**
+ * gsm_control_rls - remote line status
+ * @gsm: GSM channel
+ * @data: data bytes
+ * @clen: data length
+ *
+ * The modem sends us a two byte message on the control channel whenever
+ * it wishes to send us an error state from the virtual link. Stuff
+ * this into the uplink tty if present
+ */
+
+static void gsm_control_rls(struct gsm_mux *gsm, u8 *data, int clen)
+{
+ struct tty_struct *tty;
+ unsigned int addr = 0 ;
+ u8 bits;
+ int len = clen;
+ u8 *dp = data;
+
+ while (gsm_read_ea(&addr, *dp++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ /* Must be at least one byte following ea */
+ len--;
+ if (len <= 0)
+ return;
+ addr >>= 1;
+ /* Closed port, or invalid ? */
+ if (addr == 0 || addr >= NUM_DLCI || gsm->dlci[addr] == NULL)
+ return;
+ /* No error ? */
+ bits = *dp;
+ if ((bits & 1) == 0)
+ return;
+ /* See if we have an uplink tty */
+ tty = tty_port_tty_get(&gsm->dlci[addr]->port);
+
+ if (tty) {
+ if (bits & 2)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ if (bits & 4)
+ tty_insert_flip_char(tty, 0, TTY_PARITY);
+ if (bits & 8)
+ tty_insert_flip_char(tty, 0, TTY_FRAME);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+ }
+ gsm_control_reply(gsm, CMD_RLS, data, clen);
+}
+
+static void gsm_dlci_begin_close(struct gsm_dlci *dlci);
+
+/**
+ * gsm_control_message - DLCI 0 control processing
+ * @gsm: our GSM mux
+ * @command: the command EA
+ * @data: data beyond the command/length EAs
+ * @clen: length
+ *
+ * Input processor for control messages from the other end of the link.
+ * Processes the incoming request and queues a response frame or an
+ * NSC response if not supported
+ */
+
+static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
+ u8 *data, int clen)
+{
+ u8 buf[1];
+ switch (command) {
+ case CMD_CLD: {
+ struct gsm_dlci *dlci = gsm->dlci[0];
+ /* Modem wishes to close down */
+ if (dlci) {
+ dlci->dead = 1;
+ gsm->dead = 1;
+ gsm_dlci_begin_close(dlci);
+ }
+ }
+ break;
+ case CMD_TEST:
+ /* Modem wishes to test, reply with the data */
+ gsm_control_reply(gsm, CMD_TEST, data, clen);
+ break;
+ case CMD_FCON:
+ /* Modem wants us to STFU */
+ gsm->constipated = 1;
+ gsm_control_reply(gsm, CMD_FCON, NULL, 0);
+ break;
+ case CMD_FCOFF:
+ /* Modem can accept data again */
+ gsm->constipated = 0;
+ gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
+ /* Kick the link in case it is idling */
+ gsm_data_kick(gsm);
+ break;
+ case CMD_MSC:
+ /* Out of band modem line change indicator for a DLCI */
+ gsm_control_modem(gsm, data, clen);
+ break;
+ case CMD_RLS:
+ /* Out of band error reception for a DLCI */
+ gsm_control_rls(gsm, data, clen);
+ break;
+ case CMD_PSC:
+ /* Modem wishes to enter power saving state */
+ gsm_control_reply(gsm, CMD_PSC, NULL, 0);
+ break;
+ /* Optional unsupported commands */
+ case CMD_PN: /* Parameter negotiation */
+ case CMD_RPN: /* Remote port negotation */
+ case CMD_SNC: /* Service negotation command */
+ default:
+ /* Reply to bad commands with an NSC */
+ buf[0] = command;
+ gsm_control_reply(gsm, CMD_NSC, buf, 1);
+ break;
+ }
+}
+
+/**
+ * gsm_control_response - process a response to our control
+ * @gsm: our GSM mux
+ * @command: the command (response) EA
+ * @data: data beyond the command/length EA
+ * @clen: length
+ *
+ * Process a response to an outstanding command. We only allow a single
+ * control message in flight so this is fairly easy. All the clean up
+ * is done by the caller, we just update the fields, flag it as done
+ * and return
+ */
+
+static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
+ u8 *data, int clen)
+{
+ struct gsm_control *ctrl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gsm->control_lock, flags);
+
+ ctrl = gsm->pending_cmd;
+ /* Does the reply match our command */
+ command |= 1;
+ if (ctrl != NULL && (command == ctrl->cmd || command == CMD_NSC)) {
+ /* Our command was replied to, kill the retry timer */
+ del_timer(&gsm->t2_timer);
+ gsm->pending_cmd = NULL;
+ /* Rejected by the other end */
+ if (command == CMD_NSC)
+ ctrl->error = -EOPNOTSUPP;
+ ctrl->done = 1;
+ wake_up(&gsm->event);
+ }
+ spin_unlock_irqrestore(&gsm->control_lock, flags);
+}
+
+/**
+ * gsm_control_transmit - send control packet
+ * @gsm: gsm mux
+ * @ctrl: frame to send
+ *
+ * Send out a pending control command (called under control lock)
+ */
+
+static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
+{
+ struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1,
+ gsm->ftype|PF);
+ if (msg == NULL)
+ return;
+ msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */
+ memcpy(msg->data + 1, ctrl->data, ctrl->len);
+ gsm_data_queue(gsm->dlci[0], msg);
+}
+
+/**
+ * gsm_control_retransmit - retransmit a control frame
+ * @data: pointer to our gsm object
+ *
+ * Called off the T2 timer expiry in order to retransmit control frames
+ * that have been lost in the system somewhere. The control_lock protects
+ * us from colliding with another sender or a receive completion event.
+ * In that situation the timer may still occur in a small window but
+ * gsm->pending_cmd will be NULL and we just let the timer expire.
+ */
+
+static void gsm_control_retransmit(unsigned long data)
+{
+ struct gsm_mux *gsm = (struct gsm_mux *)data;
+ struct gsm_control *ctrl;
+ unsigned long flags;
+ spin_lock_irqsave(&gsm->control_lock, flags);
+ ctrl = gsm->pending_cmd;
+ if (ctrl) {
+ gsm->cretries--;
+ if (gsm->cretries == 0) {
+ gsm->pending_cmd = NULL;
+ ctrl->error = -ETIMEDOUT;
+ ctrl->done = 1;
+ spin_unlock_irqrestore(&gsm->control_lock, flags);
+ wake_up(&gsm->event);
+ return;
+ }
+ gsm_control_transmit(gsm, ctrl);
+ mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
+ }
+ spin_unlock_irqrestore(&gsm->control_lock, flags);
+}
+
+/**
+ * gsm_control_send - send a control frame on DLCI 0
+ * @gsm: the GSM channel
+ * @command: command to send including CR bit
+ * @data: bytes of data (must be kmalloced)
+ * @len: length of the block to send
+ *
+ * Queue and dispatch a control command. Only one command can be
+ * active at a time. In theory more can be outstanding but the matching
+ * gets really complicated so for now stick to one outstanding.
+ */
+
+static struct gsm_control *gsm_control_send(struct gsm_mux *gsm,
+ unsigned int command, u8 *data, int clen)
+{
+ struct gsm_control *ctrl = kzalloc(sizeof(struct gsm_control),
+ GFP_KERNEL);
+ unsigned long flags;
+ if (ctrl == NULL)
+ return NULL;
+retry:
+ wait_event(gsm->event, gsm->pending_cmd == NULL);
+ spin_lock_irqsave(&gsm->control_lock, flags);
+ if (gsm->pending_cmd != NULL) {
+ spin_unlock_irqrestore(&gsm->control_lock, flags);
+ goto retry;
+ }
+ ctrl->cmd = command;
+ ctrl->data = data;
+ ctrl->len = clen;
+ gsm->pending_cmd = ctrl;
+ gsm->cretries = gsm->n2;
+ mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
+ gsm_control_transmit(gsm, ctrl);
+ spin_unlock_irqrestore(&gsm->control_lock, flags);
+ return ctrl;
+}
+
+/**
+ * gsm_control_wait - wait for a control to finish
+ * @gsm: GSM mux
+ * @control: control we are waiting on
+ *
+ * Waits for the control to complete or time out. Frees any used
+ * resources and returns 0 for success, or an error if the remote
+ * rejected or ignored the request.
+ */
+
+static int gsm_control_wait(struct gsm_mux *gsm, struct gsm_control *control)
+{
+ int err;
+ wait_event(gsm->event, control->done == 1);
+ err = control->error;
+ kfree(control);
+ return err;
+}
+
+
+/*
+ * DLCI level handling: Needs krefs
+ */
+
+/*
+ * State transitions and timers
+ */
+
+/**
+ * gsm_dlci_close - a DLCI has closed
+ * @dlci: DLCI that closed
+ *
+ * Perform processing when moving a DLCI into closed state. If there
+ * is an attached tty this is hung up
+ */
+
+static void gsm_dlci_close(struct gsm_dlci *dlci)
+{
+ del_timer(&dlci->t1);
+ if (debug & 8)
+ printk("DLCI %d goes closed.\n", dlci->addr);
+ dlci->state = DLCI_CLOSED;
+ if (dlci->addr != 0) {
+ struct tty_struct *tty = tty_port_tty_get(&dlci->port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
+ kfifo_reset(dlci->fifo);
+ } else
+ dlci->gsm->dead = 1;
+ wake_up(&dlci->gsm->event);
+ /* A DLCI 0 close is a MUX termination so we need to kick that
+ back to userspace somehow */
+}
+
+/**
+ * gsm_dlci_open - a DLCI has opened
+ * @dlci: DLCI that opened
+ *
+ * Perform processing when moving a DLCI into open state.
+ */
+
+static void gsm_dlci_open(struct gsm_dlci *dlci)
+{
+ /* Note that SABM UA .. SABM UA first UA lost can mean that we go
+ open -> open */
+ del_timer(&dlci->t1);
+ /* This will let a tty open continue */
+ dlci->state = DLCI_OPEN;
+ if (debug & 8)
+ printk("DLCI %d goes open.\n", dlci->addr);
+ wake_up(&dlci->gsm->event);
+}
+
+/**
+ * gsm_dlci_t1 - T1 timer expiry
+ * @dlci: DLCI that opened
+ *
+ * The T1 timer handles retransmits of control frames (essentially of
+ * SABM and DISC). We resend the command until the retry count runs out
+ * in which case an opening port goes back to closed and a closing port
+ * is simply put into closed state (any further frames from the other
+ * end will get a DM response)
+ */
+
+static void gsm_dlci_t1(unsigned long data)
+{
+ struct gsm_dlci *dlci = (struct gsm_dlci *)data;
+ struct gsm_mux *gsm = dlci->gsm;
+
+ switch (dlci->state) {
+ case DLCI_OPENING:
+ dlci->retries--;
+ if (dlci->retries) {
+ gsm_command(dlci->gsm, dlci->addr, SABM|PF);
+ mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+ } else
+ gsm_dlci_close(dlci);
+ break;
+ case DLCI_CLOSING:
+ dlci->retries--;
+ if (dlci->retries) {
+ gsm_command(dlci->gsm, dlci->addr, DISC|PF);
+ mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+ } else
+ gsm_dlci_close(dlci);
+ break;
+ }
+}
+
+/**
+ * gsm_dlci_begin_open - start channel open procedure
+ * @dlci: DLCI to open
+ *
+ * Commence opening a DLCI from the Linux side. We issue SABM messages
+ * to the modem which should then reply with a UA, at which point we
+ * will move into open state. Opening is done asynchronously with retry
+ * running off timers and the responses.
+ */
+
+static void gsm_dlci_begin_open(struct gsm_dlci *dlci)
+{
+ struct gsm_mux *gsm = dlci->gsm;
+ if (dlci->state == DLCI_OPEN || dlci->state == DLCI_OPENING)
+ return;
+ dlci->retries = gsm->n2;
+ dlci->state = DLCI_OPENING;
+ gsm_command(dlci->gsm, dlci->addr, SABM|PF);
+ mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+}
+
+/**
+ * gsm_dlci_begin_close - start channel open procedure
+ * @dlci: DLCI to open
+ *
+ * Commence closing a DLCI from the Linux side. We issue DISC messages
+ * to the modem which should then reply with a UA, at which point we
+ * will move into closed state. Closing is done asynchronously with retry
+ * off timers. We may also receive a DM reply from the other end which
+ * indicates the channel was already closed.
+ */
+
+static void gsm_dlci_begin_close(struct gsm_dlci *dlci)
+{
+ struct gsm_mux *gsm = dlci->gsm;
+ if (dlci->state == DLCI_CLOSED || dlci->state == DLCI_CLOSING)
+ return;
+ dlci->retries = gsm->n2;
+ dlci->state = DLCI_CLOSING;
+ gsm_command(dlci->gsm, dlci->addr, DISC|PF);
+ mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+}
+
+/**
+ * gsm_dlci_data - data arrived
+ * @dlci: channel
+ * @data: block of bytes received
+ * @len: length of received block
+ *
+ * A UI or UIH frame has arrived which contains data for a channel
+ * other than the control channel. If the relevant virtual tty is
+ * open we shovel the bits down it, if not we drop them.
+ */
+
+static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len)
+{
+ /* krefs .. */
+ struct tty_port *port = &dlci->port;
+ struct tty_struct *tty = tty_port_tty_get(port);
+ unsigned int modem = 0;
+
+ if (debug & 16)
+ printk("%d bytes for tty %p\n", len, tty);
+ if (tty) {
+ switch (dlci->adaption) {
+ /* Unsupported types */
+ /* Packetised interruptible data */
+ case 4:
+ break;
+ /* Packetised uininterruptible voice/data */
+ case 3:
+ break;
+ /* Asynchronous serial with line state in each frame */
+ case 2:
+ while (gsm_read_ea(&modem, *data++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ gsm_process_modem(tty, dlci, modem);
+ /* Line state will go via DLCI 0 controls only */
+ case 1:
+ default:
+ tty_insert_flip_string(tty, data, len);
+ tty_flip_buffer_push(tty);
+ }
+ tty_kref_put(tty);
+ }
+}
+
+/**
+ * gsm_dlci_control - data arrived on control channel
+ * @dlci: channel
+ * @data: block of bytes received
+ * @len: length of received block
+ *
+ * A UI or UIH frame has arrived which contains data for DLCI 0 the
+ * control channel. This should contain a command EA followed by
+ * control data bytes. The command EA contains a command/response bit
+ * and we divide up the work accordingly.
+ */
+
+static void gsm_dlci_command(struct gsm_dlci *dlci, u8 *data, int len)
+{
+ /* See what command is involved */
+ unsigned int command = 0;
+ while (len-- > 0) {
+ if (gsm_read_ea(&command, *data++) == 1) {
+ int clen = *data++;
+ len--;
+ /* FIXME: this is properly an EA */
+ clen >>= 1;
+ /* Malformed command ? */
+ if (clen > len)
+ return;
+ if (command & 1)
+ gsm_control_message(dlci->gsm, command,
+ data, clen);
+ else
+ gsm_control_response(dlci->gsm, command,
+ data, clen);
+ return;
+ }
+ }
+}
+
+/*
+ * Allocate/Free DLCI channels
+ */
+
+/**
+ * gsm_dlci_alloc - allocate a DLCI
+ * @gsm: GSM mux
+ * @addr: address of the DLCI
+ *
+ * Allocate and install a new DLCI object into the GSM mux.
+ *
+ * FIXME: review locking races
+ */
+
+static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
+{
+ struct gsm_dlci *dlci = kzalloc(sizeof(struct gsm_dlci), GFP_ATOMIC);
+ if (dlci == NULL)
+ return NULL;
+ spin_lock_init(&dlci->lock);
+ dlci->fifo = &dlci->_fifo;
+ if (kfifo_alloc(&dlci->_fifo, 4096, GFP_KERNEL) < 0) {
+ kfree(dlci);
+ return NULL;
+ }
+
+ skb_queue_head_init(&dlci->skb_list);
+ init_timer(&dlci->t1);
+ dlci->t1.function = gsm_dlci_t1;
+ dlci->t1.data = (unsigned long)dlci;
+ tty_port_init(&dlci->port);
+ dlci->port.ops = &gsm_port_ops;
+ dlci->gsm = gsm;
+ dlci->addr = addr;
+ dlci->adaption = gsm->adaption;
+ dlci->state = DLCI_CLOSED;
+ if (addr)
+ dlci->data = gsm_dlci_data;
+ else
+ dlci->data = gsm_dlci_command;
+ gsm->dlci[addr] = dlci;
+ return dlci;
+}
+
+/**
+ * gsm_dlci_free - release DLCI
+ * @dlci: DLCI to destroy
+ *
+ * Free up a DLCI. Currently to keep the lifetime rules sane we only
+ * clean up DLCI objects when the MUX closes rather than as the port
+ * is closed down on both the tty and mux levels.
+ *
+ * Can sleep.
+ */
+static void gsm_dlci_free(struct gsm_dlci *dlci)
+{
+ struct tty_struct *tty = tty_port_tty_get(&dlci->port);
+ if (tty) {
+ tty_vhangup(tty);
+ tty_kref_put(tty);
+ }
+ del_timer_sync(&dlci->t1);
+ dlci->gsm->dlci[dlci->addr] = NULL;
+ kfifo_free(dlci->fifo);
+ kfree(dlci);
+}
+
+
+/*
+ * LAPBish link layer logic
+ */
+
+/**
+ * gsm_queue - a GSM frame is ready to process
+ * @gsm: pointer to our gsm mux
+ *
+ * At this point in time a frame has arrived and been demangled from
+ * the line encoding. All the differences between the encodings have
+ * been handled below us and the frame is unpacked into the structures.
+ * The fcs holds the header FCS but any data FCS must be added here.
+ */
+
+static void gsm_queue(struct gsm_mux *gsm)
+{
+ struct gsm_dlci *dlci;
+ u8 cr;
+ int address;
+ /* We have to sneak a look at the packet body to do the FCS.
+ A somewhat layering violation in the spec */
+
+ if ((gsm->control & ~PF) == UI)
+ gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len);
+ if (gsm->fcs != GOOD_FCS) {
+ gsm->bad_fcs++;
+ if (debug & 4)
+ printk("BAD FCS %02x\n", gsm->fcs);
+ return;
+ }
+ address = gsm->address >> 1;
+ if (address >= NUM_DLCI)
+ goto invalid;
+
+ cr = gsm->address & 1; /* C/R bit */
+
+ gsm_print_packet("<--", address, cr, gsm->control, gsm->buf, gsm->len);
+
+ cr ^= 1 - gsm->initiator; /* Flip so 1 always means command */
+ dlci = gsm->dlci[address];
+
+ switch (gsm->control) {
+ case SABM|PF:
+ if (cr == 0)
+ goto invalid;
+ if (dlci == NULL)
+ dlci = gsm_dlci_alloc(gsm, address);
+ if (dlci == NULL)
+ return;
+ if (dlci->dead)
+ gsm_response(gsm, address, DM);
+ else {
+ gsm_response(gsm, address, UA);
+ gsm_dlci_open(dlci);
+ }
+ break;
+ case DISC|PF:
+ if (cr == 0)
+ goto invalid;
+ if (dlci == NULL || dlci->state == DLCI_CLOSED) {
+ gsm_response(gsm, address, DM);
+ return;
+ }
+ /* Real close complete */
+ gsm_response(gsm, address, UA);
+ gsm_dlci_close(dlci);
+ break;
+ case UA:
+ case UA|PF:
+ if (cr == 0 || dlci == NULL)
+ break;
+ switch (dlci->state) {
+ case DLCI_CLOSING:
+ gsm_dlci_close(dlci);
+ break;
+ case DLCI_OPENING:
+ gsm_dlci_open(dlci);
+ break;
+ }
+ break;
+ case DM: /* DM can be valid unsolicited */
+ case DM|PF:
+ if (cr)
+ goto invalid;
+ if (dlci == NULL)
+ return;
+ gsm_dlci_close(dlci);
+ break;
+ case UI:
+ case UI|PF:
+ case UIH:
+ case UIH|PF:
+#if 0
+ if (cr)
+ goto invalid;
+#endif
+ if (dlci == NULL || dlci->state != DLCI_OPEN) {
+ gsm_command(gsm, address, DM|PF);
+ return;
+ }
+ dlci->data(dlci, gsm->buf, gsm->len);
+ break;
+ default:
+ goto invalid;
+ }
+ return;
+invalid:
+ gsm->malformed++;
+ return;
+}
+
+
+/**
+ * gsm0_receive - perform processing for non-transparency
+ * @gsm: gsm data for this ldisc instance
+ * @c: character
+ *
+ * Receive bytes in gsm mode 0
+ */
+
+static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
+{
+ switch (gsm->state) {
+ case GSM_SEARCH: /* SOF marker */
+ if (c == GSM0_SOF) {
+ gsm->state = GSM_ADDRESS;
+ gsm->address = 0;
+ gsm->len = 0;
+ gsm->fcs = INIT_FCS;
+ }
+ break; /* Address EA */
+ case GSM_ADDRESS:
+ gsm->fcs = gsm_fcs_add(gsm->fcs, c);
+ if (gsm_read_ea(&gsm->address, c))
+ gsm->state = GSM_CONTROL;
+ break;
+ case GSM_CONTROL: /* Control Byte */
+ gsm->fcs = gsm_fcs_add(gsm->fcs, c);
+ gsm->control = c;
+ gsm->state = GSM_LEN;
+ break;
+ case GSM_LEN: /* Length EA */
+ gsm->fcs = gsm_fcs_add(gsm->fcs, c);
+ if (gsm_read_ea(&gsm->len, c)) {
+ if (gsm->len > gsm->mru) {
+ gsm->bad_size++;
+ gsm->state = GSM_SEARCH;
+ break;
+ }
+ gsm->count = 0;
+ gsm->state = GSM_DATA;
+ }
+ break;
+ case GSM_DATA: /* Data */
+ gsm->buf[gsm->count++] = c;
+ if (gsm->count == gsm->len)
+ gsm->state = GSM_FCS;
+ break;
+ case GSM_FCS: /* FCS follows the packet */
+ gsm->fcs = c;
+ gsm_queue(gsm);
+ /* And then back for the next frame */
+ gsm->state = GSM_SEARCH;
+ break;
+ }
+}
+
+/**
+ * gsm0_receive - perform processing for non-transparency
+ * @gsm: gsm data for this ldisc instance
+ * @c: character
+ *
+ * Receive bytes in mode 1 (Advanced option)
+ */
+
+static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
+{
+ if (c == GSM1_SOF) {
+ /* EOF is only valid in frame if we have got to the data state
+ and received at least one byte (the FCS) */
+ if (gsm->state == GSM_DATA && gsm->count) {
+ /* Extract the FCS */
+ gsm->count--;
+ gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->buf[gsm->count]);
+ gsm->len = gsm->count;
+ gsm_queue(gsm);
+ gsm->state = GSM_START;
+ return;
+ }
+ /* Any partial frame was a runt so go back to start */
+ if (gsm->state != GSM_START) {
+ gsm->malformed++;
+ gsm->state = GSM_START;
+ }
+ /* A SOF in GSM_START means we are still reading idling or
+ framing bytes */
+ return;
+ }
+
+ if (c == GSM1_ESCAPE) {
+ gsm->escape = 1;
+ return;
+ }
+
+ /* Only an unescaped SOF gets us out of GSM search */
+ if (gsm->state == GSM_SEARCH)
+ return;
+
+ if (gsm->escape) {
+ c ^= GSM1_ESCAPE_BITS;
+ gsm->escape = 0;
+ }
+ switch (gsm->state) {
+ case GSM_START: /* First byte after SOF */
+ gsm->address = 0;
+ gsm->state = GSM_ADDRESS;
+ gsm->fcs = INIT_FCS;
+ /* Drop through */
+ case GSM_ADDRESS: /* Address continuation */
+ gsm->fcs = gsm_fcs_add(gsm->fcs, c);
+ if (gsm_read_ea(&gsm->address, c))
+ gsm->state = GSM_CONTROL;
+ break;
+ case GSM_CONTROL: /* Control Byte */
+ gsm->fcs = gsm_fcs_add(gsm->fcs, c);
+ gsm->control = c;
+ gsm->count = 0;
+ gsm->state = GSM_DATA;
+ break;
+ case GSM_DATA: /* Data */
+ if (gsm->count > gsm->mru ) { /* Allow one for the FCS */
+ gsm->state = GSM_OVERRUN;
+ gsm->bad_size++;
+ } else
+ gsm->buf[gsm->count++] = c;
+ break;
+ case GSM_OVERRUN: /* Over-long - eg a dropped SOF */
+ break;
+ }
+}
+
+/**
+ * gsm_error - handle tty error
+ * @gsm: ldisc data
+ * @data: byte received (may be invalid)
+ * @flag: error received
+ *
+ * Handle an error in the receipt of data for a frame. Currently we just
+ * go back to hunting for a SOF.
+ *
+ * FIXME: better diagnostics ?
+ */
+
+static void gsm_error(struct gsm_mux *gsm,
+ unsigned char data, unsigned char flag)
+{
+ gsm->state = GSM_SEARCH;
+ gsm->io_error++;
+}
+
+/**
+ * gsm_cleanup_mux - generic GSM protocol cleanup
+ * @gsm: our mux
+ *
+ * Clean up the bits of the mux which are the same for all framing
+ * protocols. Remove the mux from the mux table, stop all the timers
+ * and then shut down each device hanging up the channels as we go.
+ */
+
+void gsm_cleanup_mux(struct gsm_mux *gsm)
+{
+ int i;
+ struct gsm_dlci *dlci = gsm->dlci[0];
+ struct gsm_msg *txq;
+
+ gsm->dead = 1;
+
+ spin_lock(&gsm_mux_lock);
+ for (i = 0; i < MAX_MUX; i++) {
+ if (gsm_mux[i] == gsm) {
+ gsm_mux[i] = NULL;
+ break;
+ }
+ }
+ spin_unlock(&gsm_mux_lock);
+ WARN_ON(i == MAX_MUX);
+
+ del_timer_sync(&gsm->t2_timer);
+ /* Now we are sure T2 has stopped */
+ if (dlci) {
+ dlci->dead = 1;
+ gsm_dlci_begin_close(dlci);
+ wait_event_interruptible(gsm->event,
+ dlci->state == DLCI_CLOSED);
+ }
+ /* Free up any link layer users */
+ for (i = 0; i < NUM_DLCI; i++)
+ if (gsm->dlci[i])
+ gsm_dlci_free(gsm->dlci[i]);
+ /* Now wipe the queues */
+ for (txq = gsm->tx_head; txq != NULL; txq = gsm->tx_head) {
+ gsm->tx_head = txq->next;
+ kfree(txq);
+ }
+ gsm->tx_tail = NULL;
+}
+EXPORT_SYMBOL_GPL(gsm_cleanup_mux);
+
+/**
+ * gsm_activate_mux - generic GSM setup
+ * @gsm: our mux
+ *
+ * Set up the bits of the mux which are the same for all framing
+ * protocols. Add the mux to the mux table so it can be opened and
+ * finally kick off connecting to DLCI 0 on the modem.
+ */
+
+int gsm_activate_mux(struct gsm_mux *gsm)
+{
+ struct gsm_dlci *dlci;
+ int i = 0;
+
+ init_timer(&gsm->t2_timer);
+ gsm->t2_timer.function = gsm_control_retransmit;
+ gsm->t2_timer.data = (unsigned long)gsm;
+ init_waitqueue_head(&gsm->event);
+ spin_lock_init(&gsm->control_lock);
+ spin_lock_init(&gsm->tx_lock);
+
+ if (gsm->encoding == 0)
+ gsm->receive = gsm0_receive;
+ else
+ gsm->receive = gsm1_receive;
+ gsm->error = gsm_error;
+
+ spin_lock(&gsm_mux_lock);
+ for (i = 0; i < MAX_MUX; i++) {
+ if (gsm_mux[i] == NULL) {
+ gsm_mux[i] = gsm;
+ break;
+ }
+ }
+ spin_unlock(&gsm_mux_lock);
+ if (i == MAX_MUX)
+ return -EBUSY;
+
+ dlci = gsm_dlci_alloc(gsm, 0);
+ if (dlci == NULL)
+ return -ENOMEM;
+ gsm->dead = 0; /* Tty opens are now permissible */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gsm_activate_mux);
+
+/**
+ * gsm_free_mux - free up a mux
+ * @mux: mux to free
+ *
+ * Dispose of allocated resources for a dead mux. No refcounting
+ * at present so the mux must be truely dead.
+ */
+void gsm_free_mux(struct gsm_mux *gsm)
+{
+ kfree(gsm->txframe);
+ kfree(gsm->buf);
+ kfree(gsm);
+}
+EXPORT_SYMBOL_GPL(gsm_free_mux);
+
+/**
+ * gsm_alloc_mux - allocate a mux
+ *
+ * Creates a new mux ready for activation.
+ */
+
+struct gsm_mux *gsm_alloc_mux(void)
+{
+ struct gsm_mux *gsm = kzalloc(sizeof(struct gsm_mux), GFP_KERNEL);
+ if (gsm == NULL)
+ return NULL;
+ gsm->buf = kmalloc(MAX_MRU + 1, GFP_KERNEL);
+ if (gsm->buf == NULL) {
+ kfree(gsm);
+ return NULL;
+ }
+ gsm->txframe = kmalloc(2 * MAX_MRU + 2, GFP_KERNEL);
+ if (gsm->txframe == NULL) {
+ kfree(gsm->buf);
+ kfree(gsm);
+ return NULL;
+ }
+ spin_lock_init(&gsm->lock);
+
+ gsm->t1 = T1;
+ gsm->t2 = T2;
+ gsm->n2 = N2;
+ gsm->ftype = UIH;
+ gsm->initiator = 0;
+ gsm->adaption = 1;
+ gsm->encoding = 1;
+ gsm->mru = 64; /* Default to encoding 1 so these should be 64 */
+ gsm->mtu = 64;
+ gsm->dead = 1; /* Avoid early tty opens */
+
+ return gsm;
+}
+EXPORT_SYMBOL_GPL(gsm_alloc_mux);
+
+
+
+
+/**
+ * gsmld_output - write to link
+ * @gsm: our mux
+ * @data: bytes to output
+ * @len: size
+ *
+ * Write a block of data from the GSM mux to the data channel. This
+ * will eventually be serialized from above but at the moment isn't.
+ */
+
+static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
+{
+ if (tty_write_room(gsm->tty) < len) {
+ set_bit(TTY_DO_WRITE_WAKEUP, &gsm->tty->flags);
+ return -ENOSPC;
+ }
+ if (debug & 4) {
+ printk("-->%d bytes out\n", len);
+ hex_packet(data, len);
+ }
+ gsm->tty->ops->write(gsm->tty, data, len);
+ return len;
+}
+
+/**
+ * gsmld_attach_gsm - mode set up
+ * @tty: our tty structure
+ * @gsm: our mux
+ *
+ * Set up the MUX for basic mode and commence connecting to the
+ * modem. Currently called from the line discipline set up but
+ * will need moving to an ioctl path.
+ */
+
+static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
+{
+ int ret;
+
+ gsm->tty = tty_kref_get(tty);
+ gsm->output = gsmld_output;
+ ret = gsm_activate_mux(gsm);
+ if (ret != 0)
+ tty_kref_put(gsm->tty);
+ return ret;
+}
+
+
+/**
+ * gsmld_detach_gsm - stop doing 0710 mux
+ * @tty: tty atttached to the mux
+ * @gsm: mux
+ *
+ * Shutdown and then clean up the resources used by the line discipline
+ */
+
+static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
+{
+ WARN_ON(tty != gsm->tty);
+ gsm_cleanup_mux(gsm);
+ tty_kref_put(gsm->tty);
+ gsm->tty = NULL;
+}
+
+static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct gsm_mux *gsm = tty->disc_data;
+ const unsigned char *dp;
+ char *f;
+ int i;
+ char buf[64];
+ char flags;
+
+ if (debug & 4) {
+ printk("Inbytes %dd\n", count);
+ hex_packet(cp, count);
+ }
+
+ for (i = count, dp = cp, f = fp; i; i--, dp++) {
+ flags = *f++;
+ switch (flags) {
+ case TTY_NORMAL:
+ gsm->receive(gsm, *dp);
+ break;
+ case TTY_OVERRUN:
+ case TTY_BREAK:
+ case TTY_PARITY:
+ case TTY_FRAME:
+ gsm->error(gsm, *dp, flags);
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown flag %d\n",
+ tty_name(tty, buf), flags);
+ break;
+ }
+ }
+ /* FASYNC if needed ? */
+ /* If clogged call tty_throttle(tty); */
+}
+
+/**
+ * gsmld_chars_in_buffer - report available bytes
+ * @tty: tty device
+ *
+ * Report the number of characters buffered to be delivered to user
+ * at this instant in time.
+ *
+ * Locking: gsm lock
+ */
+
+static ssize_t gsmld_chars_in_buffer(struct tty_struct *tty)
+{
+ return 0;
+}
+
+/**
+ * gsmld_flush_buffer - clean input queue
+ * @tty: terminal device
+ *
+ * Flush the input buffer. Called when the line discipline is
+ * being closed, when the tty layer wants the buffer flushed (eg
+ * at hangup).
+ */
+
+static void gsmld_flush_buffer(struct tty_struct *tty)
+{
+}
+
+/**
+ * gsmld_close - close the ldisc for this tty
+ * @tty: device
+ *
+ * Called from the terminal layer when this line discipline is
+ * being shut down, either because of a close or becsuse of a
+ * discipline change. The function will not be called while other
+ * ldisc methods are in progress.
+ */
+
+static void gsmld_close(struct tty_struct *tty)
+{
+ struct gsm_mux *gsm = tty->disc_data;
+
+ gsmld_detach_gsm(tty, gsm);
+
+ gsmld_flush_buffer(tty);
+ /* Do other clean up here */
+ gsm_free_mux(gsm);
+}
+
+/**
+ * gsmld_open - open an ldisc
+ * @tty: terminal to open
+ *
+ * Called when this line discipline is being attached to the
+ * terminal device. Can sleep. Called serialized so that no
+ * other events will occur in parallel. No further open will occur
+ * until a close.
+ */
+
+static int gsmld_open(struct tty_struct *tty)
+{
+ struct gsm_mux *gsm;
+
+ if (tty->ops->write == NULL)
+ return -EINVAL;
+
+ /* Attach our ldisc data */
+ gsm = gsm_alloc_mux();
+ if (gsm == NULL)
+ return -ENOMEM;
+
+ tty->disc_data = gsm;
+ tty->receive_room = 65536;
+
+ /* Attach the initial passive connection */
+ gsm->encoding = 1;
+ return gsmld_attach_gsm(tty, gsm);
+}
+
+/**
+ * gsmld_write_wakeup - asynchronous I/O notifier
+ * @tty: tty device
+ *
+ * Required for the ptys, serial driver etc. since processes
+ * that attach themselves to the master and rely on ASYNC
+ * IO must be woken up
+ */
+
+static void gsmld_write_wakeup(struct tty_struct *tty)
+{
+ struct gsm_mux *gsm = tty->disc_data;
+
+ /* Queue poll */
+ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ gsm_data_kick(gsm);
+ if (gsm->tx_bytes < TX_THRESH_LO)
+ gsm_dlci_data_sweep(gsm);
+}
+
+/**
+ * gsmld_read - read function for tty
+ * @tty: tty device
+ * @file: file object
+ * @buf: userspace buffer pointer
+ * @nr: size of I/O
+ *
+ * Perform reads for the line discipline. We are guaranteed that the
+ * line discipline will not be closed under us but we may get multiple
+ * parallel readers and must handle this ourselves. We may also get
+ * a hangup. Always called in user context, may sleep.
+ *
+ * This code must be sure never to sleep through a hangup.
+ */
+
+static ssize_t gsmld_read(struct tty_struct *tty, struct file *file,
+ unsigned char __user *buf, size_t nr)
+{
+ return -EOPNOTSUPP;
+}
+
+/**
+ * gsmld_write - write function for tty
+ * @tty: tty device
+ * @file: file object
+ * @buf: userspace buffer pointer
+ * @nr: size of I/O
+ *
+ * Called when the owner of the device wants to send a frame
+ * itself (or some other control data). The data is transferred
+ * as-is and must be properly framed and checksummed as appropriate
+ * by userspace. Frames are either sent whole or not at all as this
+ * avoids pain user side.
+ */
+
+static ssize_t gsmld_write(struct tty_struct *tty, struct file *file,
+ const unsigned char *buf, size_t nr)
+{
+ int space = tty_write_room(tty);
+ if (space >= nr)
+ return tty->ops->write(tty, buf, nr);
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ return -ENOBUFS;
+}
+
+/**
+ * gsmld_poll - poll method for N_GSM0710
+ * @tty: terminal device
+ * @file: file accessing it
+ * @wait: poll table
+ *
+ * Called when the line discipline is asked to poll() for data or
+ * for special events. This code is not serialized with respect to
+ * other events save open/close.
+ *
+ * This code must be sure never to sleep through a hangup.
+ * Called without the kernel lock held - fine
+ */
+
+static unsigned int gsmld_poll(struct tty_struct *tty, struct file *file,
+ poll_table *wait)
+{
+ unsigned int mask = 0;
+ struct gsm_mux *gsm = tty->disc_data;
+
+ poll_wait(file, &tty->read_wait, wait);
+ poll_wait(file, &tty->write_wait, wait);
+ if (tty_hung_up_p(file))
+ mask |= POLLHUP;
+ if (!tty_is_writelocked(tty) && tty_write_room(tty) > 0)
+ mask |= POLLOUT | POLLWRNORM;
+ if (gsm->dead)
+ mask |= POLLHUP;
+ return mask;
+}
+
+static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
+ struct gsm_config *c)
+{
+ int need_close = 0;
+ int need_restart = 0;
+
+ /* Stuff we don't support yet - UI or I frame transport, windowing */
+ if ((c->adaption !=1 && c->adaption != 2) || c->k)
+ return -EOPNOTSUPP;
+ /* Check the MRU/MTU range looks sane */
+ if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
+ return -EINVAL;
+ if (c->n2 < 3)
+ return -EINVAL;
+ if (c->encapsulation > 1) /* Basic, advanced, no I */
+ return -EINVAL;
+ if (c->initiator > 1)
+ return -EINVAL;
+ if (c->i == 0 || c->i > 2) /* UIH and UI only */
+ return -EINVAL;
+ /*
+ * See what is needed for reconfiguration
+ */
+
+ /* Timing fields */
+ if (c->t1 != 0 && c->t1 != gsm->t1)
+ need_restart = 1;
+ if (c->t2 != 0 && c->t2 != gsm->t2)
+ need_restart = 1;
+ if (c->encapsulation != gsm->encoding)
+ need_restart = 1;
+ if (c->adaption != gsm->adaption)
+ need_restart = 1;
+ /* Requires care */
+ if (c->initiator != gsm->initiator)
+ need_close = 1;
+ if (c->mru != gsm->mru)
+ need_restart = 1;
+ if (c->mtu != gsm->mtu)
+ need_restart = 1;
+
+ /*
+ * Close down what is needed, restart and initiate the new
+ * configuration
+ */
+
+ if (need_close || need_restart) {
+ gsm_dlci_begin_close(gsm->dlci[0]);
+ /* This will timeout if the link is down due to N2 expiring */
+ wait_event_interruptible(gsm->event,
+ gsm->dlci[0]->state == DLCI_CLOSED);
+ if (signal_pending(current))
+ return -EINTR;
+ }
+ if (need_restart)
+ gsm_cleanup_mux(gsm);
+
+ gsm->initiator = c->initiator;
+ gsm->mru = c->mru;
+ gsm->encoding = c->encapsulation;
+ gsm->adaption = c->adaption;
+
+ if (c->i == 1)
+ gsm->ftype = UIH;
+ else if (c->i == 2)
+ gsm->ftype = UI;
+
+ if (c->t1)
+ gsm->t1 = c->t1;
+ if (c->t2)
+ gsm->t2 = c->t2;
+
+ /* FIXME: We need to separate activation/deactivation from adding
+ and removing from the mux array */
+ if (need_restart)
+ gsm_activate_mux(gsm);
+ if (gsm->initiator && need_close)
+ gsm_dlci_begin_open(gsm->dlci[0]);
+ return 0;
+}
+
+static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct gsm_config c;
+ struct gsm_mux *gsm = tty->disc_data;
+
+ switch (cmd) {
+ case GSMIOC_GETCONF:
+ memset(&c, 0, sizeof(c));
+ c.adaption = gsm->adaption;
+ c.encapsulation = gsm->encoding;
+ c.initiator = gsm->initiator;
+ c.t1 = gsm->t1;
+ c.t2 = gsm->t2;
+ c.t3 = 0; /* Not supported */
+ c.n2 = gsm->n2;
+ if (gsm->ftype == UIH)
+ c.i = 1;
+ else
+ c.i = 2;
+ printk("Ftype %d i %d\n", gsm->ftype, c.i);
+ c.mru = gsm->mru;
+ c.mtu = gsm->mtu;
+ c.k = 0;
+ if (copy_to_user((void *)arg, &c, sizeof(c)))
+ return -EFAULT;
+ return 0;
+ case GSMIOC_SETCONF:
+ if (copy_from_user(&c, (void *)arg, sizeof(c)))
+ return -EFAULT;
+ return gsmld_config(tty, gsm, &c);
+ default:
+ return n_tty_ioctl_helper(tty, file, cmd, arg);
+ }
+}
+
+
+/* Line discipline for real tty */
+struct tty_ldisc_ops tty_ldisc_packet = {
+ .owner = THIS_MODULE,
+ .magic = TTY_LDISC_MAGIC,
+ .name = "n_gsm",
+ .open = gsmld_open,
+ .close = gsmld_close,
+ .flush_buffer = gsmld_flush_buffer,
+ .chars_in_buffer = gsmld_chars_in_buffer,
+ .read = gsmld_read,
+ .write = gsmld_write,
+ .ioctl = gsmld_ioctl,
+ .poll = gsmld_poll,
+ .receive_buf = gsmld_receive_buf,
+ .write_wakeup = gsmld_write_wakeup
+};
+
+/*
+ * Virtual tty side
+ */
+
+#define TX_SIZE 512
+
+static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk)
+{
+ u8 modembits[5];
+ struct gsm_control *ctrl;
+ int len = 2;
+
+ if (brk)
+ len++;
+
+ modembits[0] = len << 1 | EA; /* Data bytes */
+ modembits[1] = dlci->addr << 2 | 3; /* DLCI, EA, 1 */
+ modembits[2] = gsm_encode_modem(dlci) << 1 | EA;
+ if (brk)
+ modembits[3] = brk << 4 | 2 | EA; /* Valid, EA */
+ ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len + 1);
+ if (ctrl == NULL)
+ return -ENOMEM;
+ return gsm_control_wait(dlci->gsm, ctrl);
+}
+
+static int gsm_carrier_raised(struct tty_port *port)
+{
+ struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
+ /* Not yet open so no carrier info */
+ if (dlci->state != DLCI_OPEN)
+ return 0;
+ if (debug & 2)
+ return 1;
+ return dlci->modem_rx & TIOCM_CD;
+}
+
+static void gsm_dtr_rts(struct tty_port *port, int onoff)
+{
+ struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
+ unsigned int modem_tx = dlci->modem_tx;
+ if (onoff)
+ modem_tx |= TIOCM_DTR | TIOCM_RTS;
+ else
+ modem_tx &= ~(TIOCM_DTR | TIOCM_RTS);
+ if (modem_tx != dlci->modem_tx) {
+ dlci->modem_tx = modem_tx;
+ gsmtty_modem_update(dlci, 0);
+ }
+}
+
+static const struct tty_port_operations gsm_port_ops = {
+ .carrier_raised = gsm_carrier_raised,
+ .dtr_rts = gsm_dtr_rts,
+};
+
+
+static int gsmtty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct gsm_mux *gsm;
+ struct gsm_dlci *dlci;
+ struct tty_port *port;
+ unsigned int line = tty->index;
+ unsigned int mux = line >> 6;
+
+ line = line & 0x3F;
+
+ if (mux >= MAX_MUX)
+ return -ENXIO;
+ /* FIXME: we need to lock gsm_mux for lifetimes of ttys eventually */
+ if (gsm_mux[mux] == NULL)
+ return -EUNATCH;
+ if (line == 0 || line > 61) /* 62/63 reserved */
+ return -ECHRNG;
+ gsm = gsm_mux[mux];
+ if (gsm->dead)
+ return -EL2HLT;
+ dlci = gsm->dlci[line];
+ if (dlci == NULL)
+ dlci = gsm_dlci_alloc(gsm, line);
+ if (dlci == NULL)
+ return -ENOMEM;
+ port = &dlci->port;
+ port->count++;
+ tty->driver_data = dlci;
+ tty_port_tty_set(port, tty);
+
+ dlci->modem_rx = 0;
+ /* We could in theory open and close before we wait - eg if we get
+ a DM straight back. This is ok as that will have caused a hangup */
+ set_bit(ASYNCB_INITIALIZED, &port->flags);
+ /* Start sending off SABM messages */
+ gsm_dlci_begin_open(dlci);
+ /* And wait for virtual carrier */
+ return tty_port_block_til_ready(port, tty, filp);
+}
+
+static void gsmtty_close(struct tty_struct *tty, struct file *filp)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ if (dlci == NULL)
+ return;
+ if (tty_port_close_start(&dlci->port, tty, filp) == 0)
+ return;
+ gsm_dlci_begin_close(dlci);
+ tty_port_close_end(&dlci->port, tty);
+ tty_port_tty_set(&dlci->port, NULL);
+}
+
+static void gsmtty_hangup(struct tty_struct *tty)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ tty_port_hangup(&dlci->port);
+ gsm_dlci_begin_close(dlci);
+}
+
+static int gsmtty_write(struct tty_struct *tty, const unsigned char *buf,
+ int len)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ /* Stuff the bytes into the fifo queue */
+ int sent = kfifo_in_locked(dlci->fifo, buf, len, &dlci->lock);
+ /* Need to kick the channel */
+ gsm_dlci_data_kick(dlci);
+ return sent;
+}
+
+static int gsmtty_write_room(struct tty_struct *tty)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ return TX_SIZE - kfifo_len(dlci->fifo);
+}
+
+static int gsmtty_chars_in_buffer(struct tty_struct *tty)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ return kfifo_len(dlci->fifo);
+}
+
+static void gsmtty_flush_buffer(struct tty_struct *tty)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ /* Caution needed: If we implement reliable transport classes
+ then the data being transmitted can't simply be junked once
+ it has first hit the stack. Until then we can just blow it
+ away */
+ kfifo_reset(dlci->fifo);
+ /* Need to unhook this DLCI from the transmit queue logic */
+}
+
+static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ /* The FIFO handles the queue so the kernel will do the right
+ thing waiting on chars_in_buffer before calling us. No work
+ to do here */
+}
+
+static int gsmtty_tiocmget(struct tty_struct *tty, struct file *filp)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ return dlci->modem_rx;
+}
+
+static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp,
+ unsigned int set, unsigned int clear)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ unsigned int modem_tx = dlci->modem_tx;
+
+ modem_tx &= clear;
+ modem_tx |= set;
+
+ if (modem_tx != dlci->modem_tx) {
+ dlci->modem_tx = modem_tx;
+ return gsmtty_modem_update(dlci, 0);
+ }
+ return 0;
+}
+
+
+static int gsmtty_ioctl(struct tty_struct *tty, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ return -ENOIOCTLCMD;
+}
+
+static void gsmtty_set_termios(struct tty_struct *tty, struct ktermios *old)
+{
+ /* For the moment its fixed. In actual fact the speed information
+ for the virtual channel can be propogated in both directions by
+ the RPN control message. This however rapidly gets nasty as we
+ then have to remap modem signals each way according to whether
+ our virtual cable is null modem etc .. */
+ tty_termios_copy_hw(tty->termios, old);
+}
+
+static void gsmtty_throttle(struct tty_struct *tty)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ if (tty->termios->c_cflag & CRTSCTS)
+ dlci->modem_tx &= ~TIOCM_DTR;
+ dlci->throttled = 1;
+ /* Send an MSC with DTR cleared */
+ gsmtty_modem_update(dlci, 0);
+}
+
+static void gsmtty_unthrottle(struct tty_struct *tty)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ if (tty->termios->c_cflag & CRTSCTS)
+ dlci->modem_tx |= TIOCM_DTR;
+ dlci->throttled = 0;
+ /* Send an MSC with DTR set */
+ gsmtty_modem_update(dlci, 0);
+}
+
+static int gsmtty_break_ctl(struct tty_struct *tty, int state)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ int encode = 0; /* Off */
+
+ if (state == -1) /* "On indefinitely" - we can't encode this
+ properly */
+ encode = 0x0F;
+ else if (state > 0) {
+ encode = state / 200; /* mS to encoding */
+ if (encode > 0x0F)
+ encode = 0x0F; /* Best effort */
+ }
+ return gsmtty_modem_update(dlci, encode);
+}
+
+static struct tty_driver *gsm_tty_driver;
+
+/* Virtual ttys for the demux */
+static const struct tty_operations gsmtty_ops = {
+ .open = gsmtty_open,
+ .close = gsmtty_close,
+ .write = gsmtty_write,
+ .write_room = gsmtty_write_room,
+ .chars_in_buffer = gsmtty_chars_in_buffer,
+ .flush_buffer = gsmtty_flush_buffer,
+ .ioctl = gsmtty_ioctl,
+ .throttle = gsmtty_throttle,
+ .unthrottle = gsmtty_unthrottle,
+ .set_termios = gsmtty_set_termios,
+ .hangup = gsmtty_hangup,
+ .wait_until_sent = gsmtty_wait_until_sent,
+ .tiocmget = gsmtty_tiocmget,
+ .tiocmset = gsmtty_tiocmset,
+ .break_ctl = gsmtty_break_ctl,
+};
+
+
+
+static int __init gsm_init(void)
+{
+ /* Fill in our line protocol discipline, and register it */
+ int status = tty_register_ldisc(N_GSM0710, &tty_ldisc_packet);
+ if (status != 0) {
+ printk(KERN_ERR "n_gsm: can't register line discipline (err = %d)\n", status);
+ return status;
+ }
+
+ gsm_tty_driver = alloc_tty_driver(256);
+ if (!gsm_tty_driver) {
+ tty_unregister_ldisc(N_GSM0710);
+ printk(KERN_ERR "gsm_init: tty allocation failed.\n");
+ return -EINVAL;
+ }
+ gsm_tty_driver->owner = THIS_MODULE;
+ gsm_tty_driver->driver_name = "gsmtty";
+ gsm_tty_driver->name = "gsmtty";
+ gsm_tty_driver->major = 0; /* Dynamic */
+ gsm_tty_driver->minor_start = 0;
+ gsm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ gsm_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ gsm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV
+ | TTY_DRIVER_HARDWARE_BREAK;
+ gsm_tty_driver->init_termios = tty_std_termios;
+ /* Fixme */
+ gsm_tty_driver->init_termios.c_lflag &= ~ECHO;
+ tty_set_operations(gsm_tty_driver, &gsmtty_ops);
+
+ spin_lock_init(&gsm_mux_lock);
+
+ if (tty_register_driver(gsm_tty_driver)) {
+ put_tty_driver(gsm_tty_driver);
+ tty_unregister_ldisc(N_GSM0710);
+ printk(KERN_ERR "gsm_init: tty registration failed.\n");
+ return -EBUSY;
+ }
+ printk(KERN_INFO "gsm_init: loaded as %d,%d.\n", gsm_tty_driver->major, gsm_tty_driver->minor_start);
+ return 0;
+}
+
+static void __exit gsm_exit(void)
+{
+ int status = tty_unregister_ldisc(N_GSM0710);
+ if (status != 0)
+ printk(KERN_ERR "n_gsm: can't unregister line discipline (err = %d)\n", status);
+ tty_unregister_driver(gsm_tty_driver);
+ put_tty_driver(gsm_tty_driver);
+ printk(KERN_INFO "gsm_init: unloaded.\n");
+}
+
+module_init(gsm_init);
+module_exit(gsm_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_LDISC(N_GSM0710);
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 78a62ebe75c7..ecbe479c7d68 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -176,23 +176,6 @@ static void config_setup(struct cyclades_port *);
static void show_status(int);
#endif
-#ifdef CONFIG_REMOTE_DEBUG
-static void debug_setup(void);
-void queueDebugChar(int c);
-int getDebugChar(void);
-
-#define DEBUG_PORT 1
-#define DEBUG_LEN 256
-
-typedef struct {
- int in;
- int out;
- unsigned char buf[DEBUG_LEN];
-} debugq;
-
-debugq debugiq;
-#endif
-
/*
* I have my own version of udelay(), as it is needed when initialising
* the chip, before the delay loop has been calibrated. Should probably
@@ -515,11 +498,6 @@ static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id)
/* determine the channel and change to that context */
channel = (u_short) (base_addr[CyLICR] >> 2);
-#ifdef CONFIG_REMOTE_DEBUG
- if (channel == DEBUG_PORT) {
- panic("TxInt on debug port!!!");
- }
-#endif
/* validate the port number (as configured and open) */
if ((channel < 0) || (NR_PORTS <= channel)) {
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
@@ -634,14 +612,6 @@ static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id)
info->last_active = jiffies;
save_cnt = char_count = base_addr[CyRFOC];
-#ifdef CONFIG_REMOTE_DEBUG
- if (channel == DEBUG_PORT) {
- while (char_count--) {
- data = base_addr[CyRDR];
- queueDebugChar(data);
- }
- } else
-#endif
/* if there is nowhere to put the data, discard it */
if (info->tty == 0) {
while (char_count--) {
@@ -2195,9 +2165,7 @@ static int __init serial167_init(void)
port_num++;
info++;
}
-#ifdef CONFIG_REMOTE_DEBUG
- debug_setup();
-#endif
+
ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0,
"cd2401_errors", cd2401_rxerr_interrupt);
if (ret) {
@@ -2518,193 +2486,4 @@ static int __init serial167_console_init(void)
console_initcall(serial167_console_init);
-#ifdef CONFIG_REMOTE_DEBUG
-void putDebugChar(int c)
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- unsigned long flags;
- volatile u_char sink;
- u_char ier;
- int port;
-
- local_irq_save(flags);
-
- /* Ensure transmitter is enabled! */
-
- port = DEBUG_PORT;
- base_addr[CyCAR] = (u_char) port;
- while (base_addr[CyCCR])
- ;
- base_addr[CyCCR] = CyENB_XMTR;
-
- ier = base_addr[CyIER];
- base_addr[CyIER] = CyTxMpty;
-
- while (1) {
- if (pcc2chip[PccSCCTICR] & 0x20) {
- /* We have a Tx int. Acknowledge it */
- sink = pcc2chip[PccTPIACKR];
- if ((base_addr[CyLICR] >> 2) == port) {
- base_addr[CyTDR] = c;
- base_addr[CyTEOIR] = 0;
- break;
- } else
- base_addr[CyTEOIR] = CyNOTRANS;
- }
- }
-
- base_addr[CyIER] = ier;
-
- local_irq_restore(flags);
-}
-
-int getDebugChar()
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- unsigned long flags;
- volatile u_char sink;
- u_char ier;
- int port;
- int i, c;
-
- i = debugiq.out;
- if (i != debugiq.in) {
- c = debugiq.buf[i];
- if (++i == DEBUG_LEN)
- i = 0;
- debugiq.out = i;
- return c;
- }
- /* OK, nothing in queue, wait in poll loop */
-
- local_irq_save(flags);
-
- /* Ensure receiver is enabled! */
-
- port = DEBUG_PORT;
- base_addr[CyCAR] = (u_char) port;
-#if 0
- while (base_addr[CyCCR])
- ;
- base_addr[CyCCR] = CyENB_RCVR;
-#endif
- ier = base_addr[CyIER];
- base_addr[CyIER] = CyRxData;
-
- while (1) {
- if (pcc2chip[PccSCCRICR] & 0x20) {
- /* We have a Rx int. Acknowledge it */
- sink = pcc2chip[PccRPIACKR];
- if ((base_addr[CyLICR] >> 2) == port) {
- int cnt = base_addr[CyRFOC];
- while (cnt-- > 0) {
- c = base_addr[CyRDR];
- if (c == 0)
- printk
- ("!! debug char is null (cnt=%d) !!",
- cnt);
- else
- queueDebugChar(c);
- }
- base_addr[CyREOIR] = 0;
- i = debugiq.out;
- if (i == debugiq.in)
- panic("Debug input queue empty!");
- c = debugiq.buf[i];
- if (++i == DEBUG_LEN)
- i = 0;
- debugiq.out = i;
- break;
- } else
- base_addr[CyREOIR] = CyNOTRANS;
- }
- }
-
- base_addr[CyIER] = ier;
-
- local_irq_restore(flags);
-
- return (c);
-}
-
-void queueDebugChar(int c)
-{
- int i;
-
- i = debugiq.in;
- debugiq.buf[i] = c;
- if (++i == DEBUG_LEN)
- i = 0;
- if (i != debugiq.out)
- debugiq.in = i;
-}
-
-static void debug_setup()
-{
- unsigned long flags;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int i, cflag;
-
- cflag = B19200;
-
- local_irq_save(flags);
-
- for (i = 0; i < 4; i++) {
- base_addr[CyCAR] = i;
- base_addr[CyLICR] = i << 2;
- }
-
- debugiq.in = debugiq.out = 0;
-
- base_addr[CyCAR] = DEBUG_PORT;
-
- /* baud rate */
- i = cflag & CBAUD;
-
- base_addr[CyIER] = 0;
-
- base_addr[CyCMR] = CyASYNC;
- base_addr[CyLICR] = DEBUG_PORT << 2;
- base_addr[CyLIVR] = 0x5c;
-
- /* tx and rx baud rate */
-
- base_addr[CyTCOR] = baud_co[i];
- base_addr[CyTBPR] = baud_bpr[i];
- base_addr[CyRCOR] = baud_co[i] >> 5;
- base_addr[CyRBPR] = baud_bpr[i];
-
- /* set line characteristics according configuration */
-
- base_addr[CySCHR1] = 0;
- base_addr[CySCHR2] = 0;
- base_addr[CySCRL] = 0;
- base_addr[CySCRH] = 0;
- base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE;
- base_addr[CyCOR2] = 0;
- base_addr[CyCOR3] = Cy_1_STOP;
- base_addr[CyCOR4] = baud_cor4[i];
- base_addr[CyCOR5] = 0;
- base_addr[CyCOR6] = 0;
- base_addr[CyCOR7] = 0;
-
- write_cy_cmd(base_addr, CyINIT_CHAN);
- write_cy_cmd(base_addr, CyENB_RCVR);
-
- base_addr[CyCAR] = DEBUG_PORT; /* !!! Is this needed? */
-
- base_addr[CyRTPRL] = 2;
- base_addr[CyRTPRH] = 0;
-
- base_addr[CyMSVR1] = CyRTS;
- base_addr[CyMSVR2] = CyDTR;
-
- base_addr[CyIER] = CyRxData;
-
- local_irq_restore(flags);
-
-} /* debug_setup */
-
-#endif
-
MODULE_LICENSE("GPL");
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index 7ee52164d474..cc1e9850d655 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -238,7 +238,7 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
* @size: size
*
* Queue a series of bytes to the tty buffering. All the characters
- * passed are marked as without error. Returns the number added.
+ * passed are marked with the supplied flag. Returns the number added.
*
* Locking: Called functions may take tty->buf.lock
*/
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 302836a80693..8b23165bc5dc 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1423,8 +1423,8 @@ config SERIAL_SC26XX_CONSOLE
Support for Console on SC2681/SC2692 serial ports.
config SERIAL_BFIN_SPORT
- tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
- depends on BLACKFIN && EXPERIMENTAL
+ tristate "Blackfin SPORT emulate UART"
+ depends on BLACKFIN
select SERIAL_CORE
help
Enable SPORT emulate UART on Blackfin series.
@@ -1439,28 +1439,52 @@ config SERIAL_BFIN_SPORT_CONSOLE
config SERIAL_BFIN_SPORT0_UART
bool "Enable UART over SPORT0"
- depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M)
+ depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
help
Enable UART over SPORT0
+config SERIAL_BFIN_SPORT0_UART_CTSRTS
+ bool "Enable UART over SPORT0 hardware flow control"
+ depends on SERIAL_BFIN_SPORT0_UART
+ help
+ Enable hardware flow control in the driver.
+
config SERIAL_BFIN_SPORT1_UART
bool "Enable UART over SPORT1"
depends on SERIAL_BFIN_SPORT
help
Enable UART over SPORT1
+config SERIAL_BFIN_SPORT1_UART_CTSRTS
+ bool "Enable UART over SPORT1 hardware flow control"
+ depends on SERIAL_BFIN_SPORT1_UART
+ help
+ Enable hardware flow control in the driver.
+
config SERIAL_BFIN_SPORT2_UART
bool "Enable UART over SPORT2"
depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
help
Enable UART over SPORT2
+config SERIAL_BFIN_SPORT2_UART_CTSRTS
+ bool "Enable UART over SPORT2 hardware flow control"
+ depends on SERIAL_BFIN_SPORT2_UART
+ help
+ Enable hardware flow control in the driver.
+
config SERIAL_BFIN_SPORT3_UART
bool "Enable UART over SPORT3"
depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
help
Enable UART over SPORT3
+config SERIAL_BFIN_SPORT3_UART_CTSRTS
+ bool "Enable UART over SPORT3 hardware flow control"
+ depends on SERIAL_BFIN_SPORT3_UART
+ help
+ Enable hardware flow control in the driver.
+
config SERIAL_TIMBERDALE
tristate "Support for timberdale UART"
select SERIAL_CORE
@@ -1499,4 +1523,56 @@ config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
help
Support for running a console on the GRLIB APBUART
+config SERIAL_ALTERA_JTAGUART
+ tristate "Altera JTAG UART support"
+ select SERIAL_CORE
+ help
+ This driver supports the Altera JTAG UART port.
+
+config SERIAL_ALTERA_JTAGUART_CONSOLE
+ bool "Altera JTAG UART console support"
+ depends on SERIAL_ALTERA_JTAGUART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a Altera JTAG UART port to be the system console.
+
+config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
+ bool "Bypass output when no connection"
+ depends on SERIAL_ALTERA_JTAGUART_CONSOLE
+ select SERIAL_CORE_CONSOLE
+ help
+ Bypass console output and keep going even if there is no
+ JTAG terminal connection with the host.
+
+config SERIAL_ALTERA_UART
+ tristate "Altera UART support"
+ select SERIAL_CORE
+ help
+ This driver supports the Altera softcore UART port.
+
+config SERIAL_ALTERA_UART_MAXPORTS
+ int "Maximum number of Altera UART ports"
+ depends on SERIAL_ALTERA_UART
+ default 4
+ help
+ This setting lets you define the maximum number of the Altera
+ UART ports. The usual default varies from board to board, and
+ this setting is a way of catering for that.
+
+config SERIAL_ALTERA_UART_BAUDRATE
+ int "Default baudrate for Altera UART ports"
+ depends on SERIAL_ALTERA_UART
+ default 115200
+ help
+ This setting lets you define what the default baudrate is for the
+ Altera UART ports. The usual default varies from board to board,
+ and this setting is a way of catering for that.
+
+config SERIAL_ALTERA_UART_CONSOLE
+ bool "Altera UART console support"
+ depends on SERIAL_ALTERA_UART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a Altera UART port to be the system console.
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 328f107346c4..208a85572c32 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -82,3 +82,5 @@ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
+obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
+obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
diff --git a/drivers/serial/altera_jtaguart.c b/drivers/serial/altera_jtaguart.c
new file mode 100644
index 000000000000..f9b49b5ff5e1
--- /dev/null
+++ b/drivers/serial/altera_jtaguart.c
@@ -0,0 +1,504 @@
+/*
+ * altera_jtaguart.c -- Altera JTAG UART driver
+ *
+ * Based on mcf.c -- Freescale ColdFire UART driver
+ *
+ * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
+ * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/altera_jtaguart.h>
+
+#define DRV_NAME "altera_jtaguart"
+
+/*
+ * Altera JTAG UART register definitions according to the Altera JTAG UART
+ * datasheet: http://www.altera.com/literature/hb/nios2/n2cpu_nii51009.pdf
+ */
+
+#define ALTERA_JTAGUART_SIZE 8
+
+#define ALTERA_JTAGUART_DATA_REG 0
+
+#define ALTERA_JTAGUART_DATA_DATA_MSK 0x000000FF
+#define ALTERA_JTAGUART_DATA_RVALID_MSK 0x00008000
+#define ALTERA_JTAGUART_DATA_RAVAIL_MSK 0xFFFF0000
+#define ALTERA_JTAGUART_DATA_RAVAIL_OFF 16
+
+#define ALTERA_JTAGUART_CONTROL_REG 4
+
+#define ALTERA_JTAGUART_CONTROL_RE_MSK 0x00000001
+#define ALTERA_JTAGUART_CONTROL_WE_MSK 0x00000002
+#define ALTERA_JTAGUART_CONTROL_RI_MSK 0x00000100
+#define ALTERA_JTAGUART_CONTROL_RI_OFF 8
+#define ALTERA_JTAGUART_CONTROL_WI_MSK 0x00000200
+#define ALTERA_JTAGUART_CONTROL_AC_MSK 0x00000400
+#define ALTERA_JTAGUART_CONTROL_WSPACE_MSK 0xFFFF0000
+#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF 16
+
+/*
+ * Local per-uart structure.
+ */
+struct altera_jtaguart {
+ struct uart_port port;
+ unsigned int sigs; /* Local copy of line sigs */
+ unsigned long imr; /* Local IMR mirror */
+};
+
+static unsigned int altera_jtaguart_tx_empty(struct uart_port *port)
+{
+ return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
+ ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void altera_jtaguart_set_mctrl(struct uart_port *port, unsigned int sigs)
+{
+}
+
+static void altera_jtaguart_start_tx(struct uart_port *port)
+{
+ struct altera_jtaguart *pp =
+ container_of(port, struct altera_jtaguart, port);
+
+ pp->imr |= ALTERA_JTAGUART_CONTROL_WE_MSK;
+ writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+}
+
+static void altera_jtaguart_stop_tx(struct uart_port *port)
+{
+ struct altera_jtaguart *pp =
+ container_of(port, struct altera_jtaguart, port);
+
+ pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK;
+ writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+}
+
+static void altera_jtaguart_stop_rx(struct uart_port *port)
+{
+ struct altera_jtaguart *pp =
+ container_of(port, struct altera_jtaguart, port);
+
+ pp->imr &= ~ALTERA_JTAGUART_CONTROL_RE_MSK;
+ writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+}
+
+static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static void altera_jtaguart_enable_ms(struct uart_port *port)
+{
+}
+
+static void altera_jtaguart_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ /* Just copy the old termios settings back */
+ if (old)
+ tty_termios_copy_hw(termios, old);
+}
+
+static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp)
+{
+ struct uart_port *port = &pp->port;
+ unsigned char ch, flag;
+ unsigned long status;
+
+ while ((status = readl(port->membase + ALTERA_JTAGUART_DATA_REG)) &
+ ALTERA_JTAGUART_DATA_RVALID_MSK) {
+ ch = status & ALTERA_JTAGUART_DATA_DATA_MSK;
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+ uart_insert_char(port, 0, 0, ch, flag);
+ }
+
+ tty_flip_buffer_push(port->state->port.tty);
+}
+
+static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp)
+{
+ struct uart_port *port = &pp->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int pending, count;
+
+ if (port->x_char) {
+ /* Send special char - probably flow control */
+ writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG);
+ port->x_char = 0;
+ port->icount.tx++;
+ return;
+ }
+
+ pending = uart_circ_chars_pending(xmit);
+ if (pending > 0) {
+ count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
+ ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >>
+ ALTERA_JTAGUART_CONTROL_WSPACE_OFF;
+ if (count > pending)
+ count = pending;
+ if (count > 0) {
+ pending -= count;
+ while (count--) {
+ writel(xmit->buf[xmit->tail],
+ port->membase + ALTERA_JTAGUART_DATA_REG);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+ if (pending < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+ }
+ }
+
+ if (pending == 0) {
+ pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK;
+ writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+ }
+}
+
+static irqreturn_t altera_jtaguart_interrupt(int irq, void *data)
+{
+ struct uart_port *port = data;
+ struct altera_jtaguart *pp =
+ container_of(port, struct altera_jtaguart, port);
+ unsigned int isr;
+
+ isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >>
+ ALTERA_JTAGUART_CONTROL_RI_OFF) & pp->imr;
+
+ spin_lock(&port->lock);
+
+ if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK)
+ altera_jtaguart_rx_chars(pp);
+ if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK)
+ altera_jtaguart_tx_chars(pp);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_RETVAL(isr);
+}
+
+static void altera_jtaguart_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_ALTERA_JTAGUART;
+
+ /* Clear mask, so no surprise interrupts. */
+ writel(0, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+}
+
+static int altera_jtaguart_startup(struct uart_port *port)
+{
+ struct altera_jtaguart *pp =
+ container_of(port, struct altera_jtaguart, port);
+ unsigned long flags;
+ int ret;
+
+ ret = request_irq(port->irq, altera_jtaguart_interrupt, IRQF_DISABLED,
+ DRV_NAME, port);
+ if (ret) {
+ pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d "
+ "interrupt vector=%d\n", port->line, port->irq);
+ return ret;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Enable RX interrupts now */
+ pp->imr = ALTERA_JTAGUART_CONTROL_RE_MSK;
+ writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static void altera_jtaguart_shutdown(struct uart_port *port)
+{
+ struct altera_jtaguart *pp =
+ container_of(port, struct altera_jtaguart, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Disable all interrupts now */
+ pp->imr = 0;
+ writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ free_irq(port->irq, port);
+}
+
+static const char *altera_jtaguart_type(struct uart_port *port)
+{
+ return (port->type == PORT_ALTERA_JTAGUART) ? "Altera JTAG UART" : NULL;
+}
+
+static int altera_jtaguart_request_port(struct uart_port *port)
+{
+ /* UARTs always present */
+ return 0;
+}
+
+static void altera_jtaguart_release_port(struct uart_port *port)
+{
+ /* Nothing to release... */
+}
+
+static int altera_jtaguart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_ALTERA_JTAGUART)
+ return -EINVAL;
+ return 0;
+}
+
+/*
+ * Define the basic serial functions we support.
+ */
+static struct uart_ops altera_jtaguart_ops = {
+ .tx_empty = altera_jtaguart_tx_empty,
+ .get_mctrl = altera_jtaguart_get_mctrl,
+ .set_mctrl = altera_jtaguart_set_mctrl,
+ .start_tx = altera_jtaguart_start_tx,
+ .stop_tx = altera_jtaguart_stop_tx,
+ .stop_rx = altera_jtaguart_stop_rx,
+ .enable_ms = altera_jtaguart_enable_ms,
+ .break_ctl = altera_jtaguart_break_ctl,
+ .startup = altera_jtaguart_startup,
+ .shutdown = altera_jtaguart_shutdown,
+ .set_termios = altera_jtaguart_set_termios,
+ .type = altera_jtaguart_type,
+ .request_port = altera_jtaguart_request_port,
+ .release_port = altera_jtaguart_release_port,
+ .config_port = altera_jtaguart_config_port,
+ .verify_port = altera_jtaguart_verify_port,
+};
+
+#define ALTERA_JTAGUART_MAXPORTS 1
+static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS];
+
+#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE)
+
+int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart
+ *platp)
+{
+ struct uart_port *port;
+ int i;
+
+ for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
+ port = &altera_jtaguart_ports[i].port;
+
+ port->line = i;
+ port->type = PORT_ALTERA_JTAGUART;
+ port->mapbase = platp[i].mapbase;
+ port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+ port->iotype = SERIAL_IO_MEM;
+ port->irq = platp[i].irq;
+ port->flags = ASYNC_BOOT_AUTOCONF;
+ port->ops = &altera_jtaguart_ops;
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS)
+static void altera_jtaguart_console_putc(struct console *co, const char c)
+{
+ struct uart_port *port = &(altera_jtaguart_ports + co->index)->port;
+ unsigned long status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) &
+ ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) {
+ if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ return; /* no connection activity */
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+ cpu_relax();
+ spin_lock_irqsave(&port->lock, flags);
+ }
+ writel(c, port->membase + ALTERA_JTAGUART_DATA_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+#else
+static void altera_jtaguart_console_putc(struct console *co, const char c)
+{
+ struct uart_port *port = &(altera_jtaguart_ports + co->index)->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
+ ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ cpu_relax();
+ spin_lock_irqsave(&port->lock, flags);
+ }
+ writel(c, port->membase + ALTERA_JTAGUART_DATA_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+#endif
+
+static void altera_jtaguart_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ for (; count; count--, s++) {
+ altera_jtaguart_console_putc(co, *s);
+ if (*s == '\n')
+ altera_jtaguart_console_putc(co, '\r');
+ }
+}
+
+static int __init altera_jtaguart_console_setup(struct console *co,
+ char *options)
+{
+ struct uart_port *port;
+
+ if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS)
+ return -EINVAL;
+ port = &altera_jtaguart_ports[co->index].port;
+ if (port->membase == 0)
+ return -ENODEV;
+ return 0;
+}
+
+static struct uart_driver altera_jtaguart_driver;
+
+static struct console altera_jtaguart_console = {
+ .name = "ttyJ",
+ .write = altera_jtaguart_console_write,
+ .device = uart_console_device,
+ .setup = altera_jtaguart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &altera_jtaguart_driver,
+};
+
+static int __init altera_jtaguart_console_init(void)
+{
+ register_console(&altera_jtaguart_console);
+ return 0;
+}
+
+console_initcall(altera_jtaguart_console_init);
+
+#define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console)
+
+#else
+
+#define ALTERA_JTAGUART_CONSOLE NULL
+
+#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */
+
+static struct uart_driver altera_jtaguart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "altera_jtaguart",
+ .dev_name = "ttyJ",
+ .major = ALTERA_JTAGUART_MAJOR,
+ .minor = ALTERA_JTAGUART_MINOR,
+ .nr = ALTERA_JTAGUART_MAXPORTS,
+ .cons = ALTERA_JTAGUART_CONSOLE,
+};
+
+static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
+{
+ struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
+ struct uart_port *port;
+ int i;
+
+ for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
+ port = &altera_jtaguart_ports[i].port;
+
+ port->line = i;
+ port->type = PORT_ALTERA_JTAGUART;
+ port->mapbase = platp[i].mapbase;
+ port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+ port->iotype = SERIAL_IO_MEM;
+ port->irq = platp[i].irq;
+ port->ops = &altera_jtaguart_ops;
+ port->flags = ASYNC_BOOT_AUTOCONF;
+
+ uart_add_one_port(&altera_jtaguart_driver, port);
+ }
+
+ return 0;
+}
+
+static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
+{
+ struct uart_port *port;
+ int i;
+
+ for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
+ port = &altera_jtaguart_ports[i].port;
+ if (port)
+ uart_remove_one_port(&altera_jtaguart_driver, port);
+ }
+
+ return 0;
+}
+
+static struct platform_driver altera_jtaguart_platform_driver = {
+ .probe = altera_jtaguart_probe,
+ .remove = __devexit_p(altera_jtaguart_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init altera_jtaguart_init(void)
+{
+ int rc;
+
+ rc = uart_register_driver(&altera_jtaguart_driver);
+ if (rc)
+ return rc;
+ rc = platform_driver_register(&altera_jtaguart_platform_driver);
+ if (rc) {
+ uart_unregister_driver(&altera_jtaguart_driver);
+ return rc;
+ }
+ return 0;
+}
+
+static void __exit altera_jtaguart_exit(void)
+{
+ platform_driver_unregister(&altera_jtaguart_platform_driver);
+ uart_unregister_driver(&altera_jtaguart_driver);
+}
+
+module_init(altera_jtaguart_init);
+module_exit(altera_jtaguart_exit);
+
+MODULE_DESCRIPTION("Altera JTAG UART driver");
+MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
new file mode 100644
index 000000000000..bcee156d2f2e
--- /dev/null
+++ b/drivers/serial/altera_uart.c
@@ -0,0 +1,570 @@
+/*
+ * altera_uart.c -- Altera UART driver
+ *
+ * Based on mcf.c -- Freescale ColdFire UART driver
+ *
+ * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
+ * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/altera_uart.h>
+
+#define DRV_NAME "altera_uart"
+
+/*
+ * Altera UART register definitions according to the Nios UART datasheet:
+ * http://www.altera.com/literature/ds/ds_nios_uart.pdf
+ */
+
+#define ALTERA_UART_SIZE 32
+
+#define ALTERA_UART_RXDATA_REG 0
+#define ALTERA_UART_TXDATA_REG 4
+#define ALTERA_UART_STATUS_REG 8
+#define ALTERA_UART_CONTROL_REG 12
+#define ALTERA_UART_DIVISOR_REG 16
+#define ALTERA_UART_EOP_REG 20
+
+#define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */
+#define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */
+#define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */
+#define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */
+#define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */
+#define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */
+#define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */
+#define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */
+#define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */
+#define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */
+#define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */
+#define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */
+
+ /* Enable interrupt on... */
+#define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */
+#define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */
+#define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */
+#define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */
+#define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */
+#define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */
+#define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */
+#define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */
+#define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/
+
+#define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */
+#define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */
+#define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */
+#define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */
+
+/*
+ * Local per-uart structure.
+ */
+struct altera_uart {
+ struct uart_port port;
+ unsigned int sigs; /* Local copy of line sigs */
+ unsigned short imr; /* Local IMR mirror */
+};
+
+static unsigned int altera_uart_tx_empty(struct uart_port *port)
+{
+ return (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int altera_uart_get_mctrl(struct uart_port *port)
+{
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
+ unsigned int sigs;
+
+ spin_lock_irqsave(&port->lock, flags);
+ sigs =
+ (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
+ sigs |= (pp->sigs & TIOCM_RTS);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return sigs;
+}
+
+static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
+{
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ pp->sigs = sigs;
+ if (sigs & TIOCM_RTS)
+ pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
+ else
+ pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
+ writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_start_tx(struct uart_port *port)
+{
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
+ writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_stop_tx(struct uart_port *port)
+{
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
+ writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_stop_rx(struct uart_port *port)
+{
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
+ writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (break_state == -1)
+ pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
+ else
+ pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
+ writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_enable_ms(struct uart_port *port)
+{
+}
+
+static void altera_uart_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int baud, baudclk;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+ baudclk = port->uartclk / baud;
+
+ if (old)
+ tty_termios_copy_hw(termios, old);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ spin_lock_irqsave(&port->lock, flags);
+ writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_rx_chars(struct altera_uart *pp)
+{
+ struct uart_port *port = &pp->port;
+ unsigned char ch, flag;
+ unsigned short status;
+
+ while ((status = readl(port->membase + ALTERA_UART_STATUS_REG)) &
+ ALTERA_UART_STATUS_RRDY_MSK) {
+ ch = readl(port->membase + ALTERA_UART_RXDATA_REG);
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (status & ALTERA_UART_STATUS_E_MSK) {
+ writel(status, port->membase + ALTERA_UART_STATUS_REG);
+
+ if (status & ALTERA_UART_STATUS_BRK_MSK) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (status & ALTERA_UART_STATUS_PE_MSK) {
+ port->icount.parity++;
+ } else if (status & ALTERA_UART_STATUS_ROE_MSK) {
+ port->icount.overrun++;
+ } else if (status & ALTERA_UART_STATUS_FE_MSK) {
+ port->icount.frame++;
+ }
+
+ status &= port->read_status_mask;
+
+ if (status & ALTERA_UART_STATUS_BRK_MSK)
+ flag = TTY_BREAK;
+ else if (status & ALTERA_UART_STATUS_PE_MSK)
+ flag = TTY_PARITY;
+ else if (status & ALTERA_UART_STATUS_FE_MSK)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+ uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch,
+ flag);
+ }
+
+ tty_flip_buffer_push(port->state->port.tty);
+}
+
+static void altera_uart_tx_chars(struct altera_uart *pp)
+{
+ struct uart_port *port = &pp->port;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (port->x_char) {
+ /* Send special char - probably flow control */
+ writel(port->x_char, port->membase + ALTERA_UART_TXDATA_REG);
+ port->x_char = 0;
+ port->icount.tx++;
+ return;
+ }
+
+ while (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ ALTERA_UART_STATUS_TRDY_MSK) {
+ if (xmit->head == xmit->tail)
+ break;
+ writel(xmit->buf[xmit->tail],
+ port->membase + ALTERA_UART_TXDATA_REG);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (xmit->head == xmit->tail) {
+ pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
+ writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+ }
+}
+
+static irqreturn_t altera_uart_interrupt(int irq, void *data)
+{
+ struct uart_port *port = data;
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned int isr;
+
+ isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
+ if (isr & ALTERA_UART_STATUS_RRDY_MSK)
+ altera_uart_rx_chars(pp);
+ if (isr & ALTERA_UART_STATUS_TRDY_MSK)
+ altera_uart_tx_chars(pp);
+ return IRQ_RETVAL(isr);
+}
+
+static void altera_uart_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_ALTERA_UART;
+
+ /* Clear mask, so no surprise interrupts. */
+ writel(0, port->membase + ALTERA_UART_CONTROL_REG);
+ /* Clear status register */
+ writel(0, port->membase + ALTERA_UART_STATUS_REG);
+}
+
+static int altera_uart_startup(struct uart_port *port)
+{
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
+ int ret;
+
+ ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
+ DRV_NAME, port);
+ if (ret) {
+ pr_err(DRV_NAME ": unable to attach Altera UART %d "
+ "interrupt vector=%d\n", port->line, port->irq);
+ return ret;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Enable RX interrupts now */
+ pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
+ writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static void altera_uart_shutdown(struct uart_port *port)
+{
+ struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Disable all interrupts now */
+ pp->imr = 0;
+ writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ free_irq(port->irq, port);
+}
+
+static const char *altera_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL;
+}
+
+static int altera_uart_request_port(struct uart_port *port)
+{
+ /* UARTs always present */
+ return 0;
+}
+
+static void altera_uart_release_port(struct uart_port *port)
+{
+ /* Nothing to release... */
+}
+
+static int altera_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART))
+ return -EINVAL;
+ return 0;
+}
+
+/*
+ * Define the basic serial functions we support.
+ */
+static struct uart_ops altera_uart_ops = {
+ .tx_empty = altera_uart_tx_empty,
+ .get_mctrl = altera_uart_get_mctrl,
+ .set_mctrl = altera_uart_set_mctrl,
+ .start_tx = altera_uart_start_tx,
+ .stop_tx = altera_uart_stop_tx,
+ .stop_rx = altera_uart_stop_rx,
+ .enable_ms = altera_uart_enable_ms,
+ .break_ctl = altera_uart_break_ctl,
+ .startup = altera_uart_startup,
+ .shutdown = altera_uart_shutdown,
+ .set_termios = altera_uart_set_termios,
+ .type = altera_uart_type,
+ .request_port = altera_uart_request_port,
+ .release_port = altera_uart_release_port,
+ .config_port = altera_uart_config_port,
+ .verify_port = altera_uart_verify_port,
+};
+
+static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS];
+
+#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE)
+
+int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
+{
+ struct uart_port *port;
+ int i;
+
+ for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
+ port = &altera_uart_ports[i].port;
+
+ port->line = i;
+ port->type = PORT_ALTERA_UART;
+ port->mapbase = platp[i].mapbase;
+ port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
+ port->iotype = SERIAL_IO_MEM;
+ port->irq = platp[i].irq;
+ port->uartclk = platp[i].uartclk;
+ port->flags = ASYNC_BOOT_AUTOCONF;
+ port->ops = &altera_uart_ops;
+ }
+
+ return 0;
+}
+
+static void altera_uart_console_putc(struct console *co, const char c)
+{
+ struct uart_port *port = &(altera_uart_ports + co->index)->port;
+ int i;
+
+ for (i = 0; i < 0x10000; i++) {
+ if (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ ALTERA_UART_STATUS_TRDY_MSK)
+ break;
+ }
+ writel(c, port->membase + ALTERA_UART_TXDATA_REG);
+ for (i = 0; i < 0x10000; i++) {
+ if (readl(port->membase + ALTERA_UART_STATUS_REG) &
+ ALTERA_UART_STATUS_TRDY_MSK)
+ break;
+ }
+}
+
+static void altera_uart_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ for (; count; count--, s++) {
+ altera_uart_console_putc(co, *s);
+ if (*s == '\n')
+ altera_uart_console_putc(co, '\r');
+ }
+}
+
+static int __init altera_uart_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
+ return -EINVAL;
+ port = &altera_uart_ports[co->index].port;
+ if (port->membase == 0)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver altera_uart_driver;
+
+static struct console altera_uart_console = {
+ .name = "ttyS",
+ .write = altera_uart_console_write,
+ .device = uart_console_device,
+ .setup = altera_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &altera_uart_driver,
+};
+
+static int __init altera_uart_console_init(void)
+{
+ register_console(&altera_uart_console);
+ return 0;
+}
+
+console_initcall(altera_uart_console_init);
+
+#define ALTERA_UART_CONSOLE (&altera_uart_console)
+
+#else
+
+#define ALTERA_UART_CONSOLE NULL
+
+#endif /* CONFIG_ALTERA_UART_CONSOLE */
+
+/*
+ * Define the altera_uart UART driver structure.
+ */
+static struct uart_driver altera_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = DRV_NAME,
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
+ .cons = ALTERA_UART_CONSOLE,
+};
+
+static int __devinit altera_uart_probe(struct platform_device *pdev)
+{
+ struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
+ struct uart_port *port;
+ int i;
+
+ for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
+ port = &altera_uart_ports[i].port;
+
+ port->line = i;
+ port->type = PORT_ALTERA_UART;
+ port->mapbase = platp[i].mapbase;
+ port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
+ port->iotype = SERIAL_IO_MEM;
+ port->irq = platp[i].irq;
+ port->uartclk = platp[i].uartclk;
+ port->ops = &altera_uart_ops;
+ port->flags = ASYNC_BOOT_AUTOCONF;
+
+ uart_add_one_port(&altera_uart_driver, port);
+ }
+
+ return 0;
+}
+
+static int altera_uart_remove(struct platform_device *pdev)
+{
+ struct uart_port *port;
+ int i;
+
+ for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) {
+ port = &altera_uart_ports[i].port;
+ if (port)
+ uart_remove_one_port(&altera_uart_driver, port);
+ }
+
+ return 0;
+}
+
+static struct platform_driver altera_uart_platform_driver = {
+ .probe = altera_uart_probe,
+ .remove = __devexit_p(altera_uart_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = NULL,
+ },
+};
+
+static int __init altera_uart_init(void)
+{
+ int rc;
+
+ rc = uart_register_driver(&altera_uart_driver);
+ if (rc)
+ return rc;
+ rc = platform_driver_register(&altera_uart_platform_driver);
+ if (rc) {
+ uart_unregister_driver(&altera_uart_driver);
+ return rc;
+ }
+ return 0;
+}
+
+static void __exit altera_uart_exit(void)
+{
+ platform_driver_unregister(&altera_uart_platform_driver);
+ uart_unregister_driver(&altera_uart_driver);
+}
+
+module_init(altera_uart_init);
+module_exit(altera_uart_exit);
+
+MODULE_DESCRIPTION("Altera UART driver");
+MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index c88f8ad3ff82..e57fb3d228e2 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -34,32 +34,12 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#include <asm/bfin_sport.h>
#include <asm/delay.h>
#include <asm/portmux.h>
#include "bfin_sport_uart.h"
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-unsigned short bfin_uart_pin_req_sport0[] =
- {P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \
- P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-unsigned short bfin_uart_pin_req_sport1[] =
- {P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \
- P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-unsigned short bfin_uart_pin_req_sport2[] =
- {P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, \
- P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-unsigned short bfin_uart_pin_req_sport3[] =
- {P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, \
- P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0};
-#endif
-
struct sport_uart_port {
struct uart_port port;
int err_irq;
@@ -69,9 +49,13 @@ struct sport_uart_port {
unsigned short txmask2;
unsigned char stopb;
/* unsigned char parib; */
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+ int cts_pin;
+ int rts_pin;
+#endif
};
-static void sport_uart_tx_chars(struct sport_uart_port *up);
+static int sport_uart_tx_chars(struct sport_uart_port *up);
static void sport_stop_tx(struct uart_port *port);
static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
@@ -219,6 +203,59 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+static unsigned int sport_get_mctrl(struct uart_port *port)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+ if (up->cts_pin < 0)
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+ /* CTS PIN is negative assertive. */
+ if (SPORT_UART_GET_CTS(up))
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+ else
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)port;
+ if (up->rts_pin < 0)
+ return;
+
+ /* RTS PIN is negative assertive. */
+ if (mctrl & TIOCM_RTS)
+ SPORT_UART_ENABLE_RTS(up);
+ else
+ SPORT_UART_DISABLE_RTS(up);
+}
+
+/*
+ * Handle any change of modem status signal.
+ */
+static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id)
+{
+ struct sport_uart_port *up = (struct sport_uart_port *)dev_id;
+ unsigned int status;
+
+ status = sport_get_mctrl(&up->port);
+ uart_handle_cts_change(&up->port, status & TIOCM_CTS);
+
+ return IRQ_HANDLED;
+}
+#else
+static unsigned int sport_get_mctrl(struct uart_port *port)
+{
+ pr_debug("%s enter\n", __func__);
+ return TIOCM_CTS | TIOCM_CD | TIOCM_DSR;
+}
+
+static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ pr_debug("%s enter\n", __func__);
+}
+#endif
+
/* Reqeust IRQ, Setup clock */
static int sport_startup(struct uart_port *port)
{
@@ -247,6 +284,21 @@ static int sport_startup(struct uart_port *port)
goto fail2;
}
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+ if (up->cts_pin >= 0) {
+ if (request_irq(gpio_to_irq(up->cts_pin),
+ sport_mctrl_cts_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+ IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) {
+ up->cts_pin = -1;
+ dev_info(port->dev, "Unable to attach BlackFin UART \
+ over SPORT CTS interrupt. So, disable it.\n");
+ }
+ }
+ if (up->rts_pin >= 0)
+ gpio_direction_output(up->rts_pin, 0);
+#endif
+
return 0;
fail2:
free_irq(up->port.irq+1, up);
@@ -256,23 +308,35 @@ static int sport_startup(struct uart_port *port)
return ret;
}
-static void sport_uart_tx_chars(struct sport_uart_port *up)
+/*
+ * sport_uart_tx_chars
+ *
+ * ret 1 means need to enable sport.
+ * ret 0 means do nothing.
+ */
+static int sport_uart_tx_chars(struct sport_uart_port *up)
{
struct circ_buf *xmit = &up->port.state->xmit;
if (SPORT_GET_STAT(up) & TXF)
- return;
+ return 0;
if (up->port.x_char) {
tx_one_byte(up, up->port.x_char);
up->port.icount.tx++;
up->port.x_char = 0;
- return;
+ return 1;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- sport_stop_tx(&up->port);
- return;
+ /* The waiting loop to stop SPORT TX from TX interrupt is
+ * too long. This may block SPORT RX interrupts and cause
+ * RX FIFO overflow. So, do stop sport TX only after the last
+ * char in TX FIFO is moved into the shift register.
+ */
+ if (SPORT_GET_STAT(up) & TXHRE)
+ sport_stop_tx(&up->port);
+ return 0;
}
while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) {
@@ -283,6 +347,8 @@ static void sport_uart_tx_chars(struct sport_uart_port *up)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
+
+ return 1;
}
static unsigned int sport_tx_empty(struct uart_port *port)
@@ -298,23 +364,15 @@ static unsigned int sport_tx_empty(struct uart_port *port)
return 0;
}
-static unsigned int sport_get_mctrl(struct uart_port *port)
-{
- pr_debug("%s enter\n", __func__);
- return (TIOCM_CTS | TIOCM_CD | TIOCM_DSR);
-}
-
-static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- pr_debug("%s enter\n", __func__);
-}
-
static void sport_stop_tx(struct uart_port *port)
{
struct sport_uart_port *up = (struct sport_uart_port *)port;
pr_debug("%s enter\n", __func__);
+ if (!(SPORT_GET_TCR1(up) & TSPEN))
+ return;
+
/* Although the hold register is empty, last byte is still in shift
* register and not sent out yet. So, put a dummy data into TX FIFO.
* Then, sport tx stops when last byte is shift out and the dummy
@@ -337,11 +395,12 @@ static void sport_start_tx(struct uart_port *port)
pr_debug("%s enter\n", __func__);
/* Write data into SPORT FIFO before enable SPROT to transmit */
- sport_uart_tx_chars(up);
+ if (sport_uart_tx_chars(up)) {
+ /* Enable transmit, then an interrupt will generated */
+ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
+ SSYNC();
+ }
- /* Enable transmit, then an interrupt will generated */
- SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
- SSYNC();
pr_debug("%s exit\n", __func__);
}
@@ -379,6 +438,10 @@ static void sport_shutdown(struct uart_port *port)
free_irq(up->port.irq, up);
free_irq(up->port.irq+1, up);
free_irq(up->err_irq, up);
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+ if (up->cts_pin >= 0)
+ free_irq(gpio_to_irq(up->cts_pin), up);
+#endif
}
static const char *sport_type(struct uart_port *port)
@@ -448,27 +511,14 @@ static void sport_set_termios(struct uart_port *port,
/* up->parib = 1; */
}
- port->read_status_mask = OE;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= (FE | PE);
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= BI;
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ port->read_status_mask = 0;
/*
* Characters to ignore
*/
port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= FE | PE;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= OE;
- }
/* RX extract mask */
up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8);
@@ -488,8 +538,6 @@ static void sport_set_termios(struct uart_port *port,
/* uart baud rate */
port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16);
- spin_lock_irqsave(&up->port.lock, flags);
-
/* Disable UART */
SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
@@ -542,6 +590,8 @@ struct uart_ops sport_uart_ops = {
static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS];
#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
+#define CLASS_BFIN_SPORT_CONSOLE "bfin-sport-console"
+
static int __init
sport_uart_console_setup(struct console *co, char *options)
{
@@ -549,7 +599,11 @@ sport_uart_console_setup(struct console *co, char *options)
int baud = 57600;
int bits = 8;
int parity = 'n';
+# ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+ int flow = 'r';
+# else
int flow = 'n';
+# endif
/* Check whether an invalid uart number has been specified */
if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS)
@@ -690,11 +744,11 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
if (bfin_sport_uart_ports[pdev->id] == NULL) {
bfin_sport_uart_ports[pdev->id] =
- kmalloc(sizeof(struct sport_uart_port), GFP_KERNEL);
+ kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL);
sport = bfin_sport_uart_ports[pdev->id];
if (!sport) {
dev_err(&pdev->dev,
- "Fail to kmalloc sport_uart_port\n");
+ "Fail to malloc sport_uart_port\n");
return -ENOMEM;
}
@@ -720,13 +774,13 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
goto out_error_free_peripherals;
}
- sport->port.membase = ioremap(res->start,
- res->end - res->start);
+ sport->port.membase = ioremap(res->start, resource_size(res));
if (!sport->port.membase) {
dev_err(&pdev->dev, "Cannot map sport IO\n");
ret = -ENXIO;
goto out_error_free_peripherals;
}
+ sport->port.mapbase = res->start;
sport->port.irq = platform_get_irq(pdev, 0);
if (sport->port.irq < 0) {
@@ -741,6 +795,22 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
ret = -ENOENT;
goto out_error_unmap;
}
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL)
+ sport->cts_pin = -1;
+ else
+ sport->cts_pin = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+ if (res == NULL)
+ sport->rts_pin = -1;
+ else
+ sport->rts_pin = res->start;
+
+ if (sport->rts_pin >= 0)
+ gpio_request(sport->rts_pin, DRV_NAME);
+#endif
}
#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
@@ -779,6 +849,10 @@ static int __devexit sport_uart_remove(struct platform_device *pdev)
if (sport) {
uart_remove_one_port(&sport_uart_reg, &sport->port);
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ if (sport->rts_pin >= 0)
+ gpio_free(sport->rts_pin);
+#endif
iounmap(sport->port.membase);
peripheral_free_list(
(unsigned short *)pdev->dev.platform_data);
@@ -802,7 +876,7 @@ static struct platform_driver sport_uart_driver = {
#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
static __initdata struct early_platform_driver early_sport_uart_driver = {
- .class_str = DRV_NAME,
+ .class_str = CLASS_BFIN_SPORT_CONSOLE,
.pdrv = &sport_uart_driver,
.requested_id = EARLY_PLATFORM_ID_UNSET,
};
@@ -811,7 +885,8 @@ static int __init sport_uart_rs_console_init(void)
{
early_platform_driver_register(&early_sport_uart_driver, DRV_NAME);
- early_platform_driver_probe(DRV_NAME, BFIN_SPORT_UART_MAX_PORTS, 0);
+ early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE,
+ BFIN_SPORT_UART_MAX_PORTS, 0);
register_console(&sport_uart_console);
@@ -824,7 +899,7 @@ static int __init sport_uart_init(void)
{
int ret;
- pr_info("Serial: Blackfin uart over sport driver\n");
+ pr_info("Blackfin uart over sport driver\n");
ret = uart_register_driver(&sport_uart_reg);
if (ret) {
diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
index abe03614e4df..9ce253e381d2 100644
--- a/drivers/serial/bfin_sport_uart.h
+++ b/drivers/serial/bfin_sport_uart.h
@@ -37,7 +37,21 @@
#define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV))
#define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX))
#define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX))
-#define SPORT_GET_RX32(sport) bfin_read32(((sport)->port.membase + OFFSET_RX))
+/*
+ * If another interrupt fires while doing a 32-bit read from RX FIFO,
+ * a fake RX underflow error will be generated. So disable interrupts
+ * to prevent interruption while reading the FIFO.
+ */
+#define SPORT_GET_RX32(sport) \
+({ \
+ unsigned int __ret; \
+ if (ANOMALY_05000473) \
+ local_irq_disable(); \
+ __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \
+ if (ANOMALY_05000473) \
+ local_irq_enable(); \
+ __ret; \
+})
#define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1))
#define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2))
#define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV))
@@ -58,4 +72,15 @@
#define SPORT_TX_FIFO_SIZE 8
+#define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \
+ || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \
+ || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \
+ || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS)
+# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+#endif
+
#endif /* _BFIN_SPORT_UART_H */
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 786ba85c170b..67ca642713b8 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -68,12 +68,22 @@ static void timbuart_start_tx(struct uart_port *port)
tasklet_schedule(&uart->tasklet);
}
+static unsigned int timbuart_tx_empty(struct uart_port *port)
+{
+ u32 isr = ioread32(port->membase + TIMBUART_ISR);
+
+ return (isr & TXBE) ? TIOCSER_TEMT : 0;
+}
+
static void timbuart_flush_buffer(struct uart_port *port)
{
- u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
+ if (!timbuart_tx_empty(port)) {
+ u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
+ TIMBUART_CTRL_FLSHTX;
- iowrite8(ctl, port->membase + TIMBUART_CTRL);
- iowrite32(TXBF, port->membase + TIMBUART_ISR);
+ iowrite8(ctl, port->membase + TIMBUART_CTRL);
+ iowrite32(TXBF, port->membase + TIMBUART_ISR);
+ }
}
static void timbuart_rx_chars(struct uart_port *port)
@@ -195,13 +205,6 @@ void timbuart_tasklet(unsigned long arg)
dev_dbg(uart->port.dev, "%s leaving\n", __func__);
}
-static unsigned int timbuart_tx_empty(struct uart_port *port)
-{
- u32 isr = ioread32(port->membase + TIMBUART_ISR);
-
- return (isr & TXBE) ? TIOCSER_TEMT : 0;
-}
-
static unsigned int timbuart_get_mctrl(struct uart_port *port)
{
u8 cts = ioread8(port->membase + TIMBUART_CTRL);
@@ -220,7 +223,7 @@ static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (mctrl & TIOCM_RTS)
iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
else
- iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+ iowrite8(0, port->membase + TIMBUART_CTRL);
}
static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index f0a6c61b17f7..e6639a95d276 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -86,7 +86,7 @@ static int ulite_receive(struct uart_port *port, int stat)
/* stats */
if (stat & ULITE_STATUS_RXVALID) {
port->icount.rx++;
- ch = readb(port->membase + ULITE_RX);
+ ch = ioread32be(port->membase + ULITE_RX);
if (stat & ULITE_STATUS_PARITY)
port->icount.parity++;
@@ -131,7 +131,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
return 0;
if (port->x_char) {
- writeb(port->x_char, port->membase + ULITE_TX);
+ iowrite32be(port->x_char, port->membase + ULITE_TX);
port->x_char = 0;
port->icount.tx++;
return 1;
@@ -140,7 +140,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return 0;
- writeb(xmit->buf[xmit->tail], port->membase + ULITE_TX);
+ iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
port->icount.tx++;
@@ -157,7 +157,7 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
int busy, n = 0;
do {
- int stat = readb(port->membase + ULITE_STATUS);
+ int stat = ioread32be(port->membase + ULITE_STATUS);
busy = ulite_receive(port, stat);
busy |= ulite_transmit(port, stat);
n++;
@@ -178,7 +178,7 @@ static unsigned int ulite_tx_empty(struct uart_port *port)
unsigned int ret;
spin_lock_irqsave(&port->lock, flags);
- ret = readb(port->membase + ULITE_STATUS);
+ ret = ioread32be(port->membase + ULITE_STATUS);
spin_unlock_irqrestore(&port->lock, flags);
return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
@@ -201,7 +201,7 @@ static void ulite_stop_tx(struct uart_port *port)
static void ulite_start_tx(struct uart_port *port)
{
- ulite_transmit(port, readb(port->membase + ULITE_STATUS));
+ ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS));
}
static void ulite_stop_rx(struct uart_port *port)
@@ -230,17 +230,17 @@ static int ulite_startup(struct uart_port *port)
if (ret)
return ret;
- writeb(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
+ iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
port->membase + ULITE_CONTROL);
- writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+ iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
return 0;
}
static void ulite_shutdown(struct uart_port *port)
{
- writeb(0, port->membase + ULITE_CONTROL);
- readb(port->membase + ULITE_CONTROL); /* dummy */
+ iowrite32be(0, port->membase + ULITE_CONTROL);
+ ioread32be(port->membase + ULITE_CONTROL); /* dummy */
free_irq(port->irq, port);
}
@@ -352,7 +352,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
/* Spin waiting for TX fifo to have space available */
for (i = 0; i < 100000; i++) {
- val = readb(port->membase + ULITE_STATUS);
+ val = ioread32be(port->membase + ULITE_STATUS);
if ((val & ULITE_STATUS_TXFULL) == 0)
break;
cpu_relax();
@@ -362,7 +362,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
static void ulite_console_putchar(struct uart_port *port, int ch)
{
ulite_console_wait_tx(port);
- writeb(ch, port->membase + ULITE_TX);
+ iowrite32be(ch, port->membase + ULITE_TX);
}
static void ulite_console_write(struct console *co, const char *s,
@@ -379,8 +379,8 @@ static void ulite_console_write(struct console *co, const char *s,
spin_lock_irqsave(&port->lock, flags);
/* save and disable interrupt */
- ier = readb(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
- writeb(0, port->membase + ULITE_CONTROL);
+ ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
+ iowrite32be(0, port->membase + ULITE_CONTROL);
uart_console_write(port, s, count, ulite_console_putchar);
@@ -388,7 +388,7 @@ static void ulite_console_write(struct console *co, const char *s,
/* restore interrupt state */
if (ier)
- writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+ iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
if (locked)
spin_unlock_irqrestore(&port->lock, flags);
@@ -601,7 +601,7 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match)
id = of_get_property(op->node, "port-number", NULL);
- return ulite_assign(&op->dev, id ? *id : -1, res.start+3, irq);
+ return ulite_assign(&op->dev, id ? *id : -1, res.start, irq);
}
static int __devexit ulite_of_remove(struct of_device *op)
diff --git a/include/linux/altera_jtaguart.h b/include/linux/altera_jtaguart.h
new file mode 100644
index 000000000000..953b178a1650
--- /dev/null
+++ b/include/linux/altera_jtaguart.h
@@ -0,0 +1,16 @@
+/*
+ * altera_jtaguart.h -- Altera JTAG UART driver defines.
+ */
+
+#ifndef __ALTJUART_H
+#define __ALTJUART_H
+
+#define ALTERA_JTAGUART_MAJOR 204
+#define ALTERA_JTAGUART_MINOR 186
+
+struct altera_jtaguart_platform_uart {
+ unsigned long mapbase; /* Physical address base */
+ unsigned int irq; /* Interrupt vector */
+};
+
+#endif /* __ALTJUART_H */
diff --git a/include/linux/altera_uart.h b/include/linux/altera_uart.h
new file mode 100644
index 000000000000..8d441064a30d
--- /dev/null
+++ b/include/linux/altera_uart.h
@@ -0,0 +1,14 @@
+/*
+ * altera_uart.h -- Altera UART driver defines.
+ */
+
+#ifndef __ALTUART_H
+#define __ALTUART_H
+
+struct altera_uart_platform_uart {
+ unsigned long mapbase; /* Physical address base */
+ unsigned int irq; /* Interrupt vector */
+ unsigned int uartclk; /* UART clock rate */
+};
+
+#endif /* __ALTUART_H */
diff --git a/include/linux/gsmmux.h b/include/linux/gsmmux.h
new file mode 100644
index 000000000000..378de4195caf
--- /dev/null
+++ b/include/linux/gsmmux.h
@@ -0,0 +1,25 @@
+#ifndef _LINUX_GSMMUX_H
+#define _LINUX_GSMMUX_H
+
+struct gsm_config
+{
+ unsigned int adaption;
+ unsigned int encapsulation;
+ unsigned int initiator;
+ unsigned int t1;
+ unsigned int t2;
+ unsigned int t3;
+ unsigned int n2;
+ unsigned int mru;
+ unsigned int mtu;
+ unsigned int k;
+ unsigned int i;
+ unsigned int unused[8]; /* Padding for expansion without
+ breaking stuff */
+};
+
+#define GSMIOC_GETCONF _IOR('G', 0, struct gsm_config)
+#define GSMIOC_SETCONF _IOW('G', 1, struct gsm_config)
+
+
+#endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 78dd1e7120a9..09d0d2d5a08b 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -182,6 +182,10 @@
/* Aeroflex Gaisler GRLIB APBUART */
#define PORT_APBUART 90
+/* Altera UARTs */
+#define PORT_ALTERA_JTAGUART 91
+#define PORT_ALTERA_UART 92
+
#ifdef __KERNEL__
#include <linux/compiler.h>
diff --git a/include/linux/tty.h b/include/linux/tty.h
index bb44fa9ae135..931078b73226 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -23,7 +23,7 @@
*/
#define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
#define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
-#define NR_LDISCS 21
+#define NR_LDISCS 30
/* line disciplines */
#define N_TTY 0
@@ -48,6 +48,7 @@
#define N_PPS 18 /* Pulse per Second */
#define N_V253 19 /* Codec control over voice modem */
#define N_CAIF 20 /* CAIF protocol for talking to modems */
+#define N_GSM0710 21 /* GSM 0710 Mux */
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as