summaryrefslogtreecommitdiff
path: root/hw/xfree86/utils
diff options
context:
space:
mode:
Diffstat (limited to 'hw/xfree86/utils')
-rw-r--r--hw/xfree86/utils/gtf/gtf.c28
-rw-r--r--hw/xfree86/utils/gtf/gtf.man.pre15
-rw-r--r--hw/xfree86/utils/xorgcfg/TODO8
-rw-r--r--hw/xfree86/utils/xorgcfg/XOrgCfg.pre1851
-rw-r--r--hw/xfree86/utils/xorgcfg/expert.c2
-rw-r--r--hw/xfree86/utils/xorgcfg/interface.c24
-rw-r--r--hw/xfree86/utils/xorgcfg/keyboard-cfg.c2
-rw-r--r--hw/xfree86/utils/xorgcfg/loader.c7
-rw-r--r--hw/xfree86/utils/xorgcfg/startx.c12
-rw-r--r--hw/xfree86/utils/xorgcfg/text-mode.c26
-rw-r--r--hw/xfree86/utils/xorgcfg/xf86config.c2
-rw-r--r--hw/xfree86/utils/xorgcfg/xorgcfg.man.pre152
-rw-r--r--hw/xfree86/utils/xorgconfig/Cards2
-rw-r--r--hw/xfree86/utils/xorgconfig/xorgconfig.c2906
-rw-r--r--hw/xfree86/utils/xorgconfig/xorgconfig.man.pre22
15 files changed, 4997 insertions, 62 deletions
diff --git a/hw/xfree86/utils/gtf/gtf.c b/hw/xfree86/utils/gtf/gtf.c
index c5b3c613a..3535300fc 100644
--- a/hw/xfree86/utils/gtf/gtf.c
+++ b/hw/xfree86/utils/gtf/gtf.c
@@ -1,3 +1,4 @@
+/* $XdotOrg: xc/programs/Xserver/hw/xfree86/etc/gtf.c,v 1.1.10.1.4.1 2004/03/19 17:09:00 eich Exp $ */
/* gtf.c Generate mode timings using the GTF Timing Standard
*
* gcc gtf.c -o gtf -lm -Wall
@@ -63,7 +64,7 @@
*
* This program takes a desired resolution and vertical refresh rate,
* and computes mode timings according to the GTF Timing Standard.
- * These mode timings can then be formatted as an XFree86 modeline
+ * These mode timings can then be formatted as an XServer modeline
* or a mode description for use by fbset(8).
*
*
@@ -74,7 +75,7 @@
* surrounding the addressable video); on most non-overscan type
* systems, the margin period is zero. I've implemented the margin
* computations but not enabled it because 1) I don't really have
- * any experience with this, and 2) neither XFree86 modelines nor
+ * any experience with this, and 2) neither XServer modelines nor
* fbset fb.modes provide an obvious way for margin timings to be
* included in their mode descriptions (needs more investigation).
*
@@ -102,7 +103,7 @@
* o Error checking.
*
*/
-/* $XFree86: xc/programs/Xserver/hw/xfree86/etc/gtf.c,v 1.2 2002/11/15 17:01:53 tsi Exp $ */
+/* $XFree86: xc/programs/Xserver/hw/xfree86/etc/gtf.c,v 1.2 2002/11/15 17:01:53tsi Exp $ */
#include <stdio.h>
@@ -145,7 +146,7 @@ typedef struct __mode
typedef struct __options
{
int x, y;
- int xf86mode, fbmode;
+ int xorgmode, fbmode;
float v_freq;
} options;
@@ -180,7 +181,7 @@ void print_value(int n, char *name, float val)
-/* print_xf86_mode() - print the XFree86 modeline, given mode timings. */
+/* print_xf86_mode() - print the XServer modeline, given mode timings. */
void print_xf86_mode (mode *m)
{
@@ -282,7 +283,7 @@ void print_fb_mode (mode *m)
* feel like testing it right now.
*
* XXX margin computations are implemented but not tested (nor used by
- * XFree86 of fbset mode descriptions, from what I can tell).
+ * XServer of fbset mode descriptions, from what I can tell).
*/
mode *vert_refresh (int h_pixels, int v_lines, float freq,
@@ -674,8 +675,9 @@ options *parse_command_line (int argc, char *argv[])
(strcmp (argv[n], "--fbmode") == 0)) {
o->fbmode = 1;
} else if ((strcmp (argv[n], "-x") == 0) ||
+ (strcmp (argv[n], "--xorgmode") == 0) ||
(strcmp (argv[n], "--xf86mode") == 0)) {
- o->xf86mode = 1;
+ o->xorgmode = 1;
} else {
goto bad_option;
}
@@ -683,10 +685,10 @@ options *parse_command_line (int argc, char *argv[])
n++;
}
- /* if neither xf86mode nor fbmode were requested, default to
- xf86mode */
+ /* if neither xorgmode nor fbmode were requested, default to
+ xorgmode */
- if (!o->fbmode && !o->xf86mode) o->xf86mode = 1;
+ if (!o->fbmode && !o->xorgmode) o->xorgmode = 1;
return (o);
@@ -694,7 +696,7 @@ options *parse_command_line (int argc, char *argv[])
fprintf (stderr, "\n");
fprintf (stderr, "usage: %s x y refresh [-v|--verbose] "
- "[-f|--fbmode] [-x|-xf86mode]\n", argv[0]);
+ "[-f|--fbmode] [-x|--xorgmode]\n", argv[0]);
fprintf (stderr, "\n");
@@ -708,7 +710,7 @@ options *parse_command_line (int argc, char *argv[])
"(traces each step of the computation)\n");
fprintf (stderr, " -f|--fbmode : output an fbset(8)-style mode "
"description\n");
- fprintf (stderr, " -x|-xf86mode : output an XFree86-style mode "
+ fprintf (stderr, " -x|--xorgmode : output an "__XSERVERNAME__"-style mode "
"description (this is the default\n"
" if no mode description is requested)\n");
@@ -732,7 +734,7 @@ int main (int argc, char *argv[])
m = vert_refresh (o->x, o->y, o->v_freq, 0, 0);
if (!m) exit (1);
- if (o->xf86mode)
+ if (o->xorgmode)
print_xf86_mode(m);
if (o->fbmode)
diff --git a/hw/xfree86/utils/gtf/gtf.man.pre b/hw/xfree86/utils/gtf/gtf.man.pre
index ea76684f3..4dc228d2c 100644
--- a/hw/xfree86/utils/gtf/gtf.man.pre
+++ b/hw/xfree86/utils/gtf/gtf.man.pre
@@ -1,4 +1,5 @@
-.\" $XFree86$
+.\" $XFree86$
+.\" $XdotOrg: xc/programs/Xserver/hw/xfree86/etc/gtf.man,v 1.1.10.1.4.2 2004/03/27 16:56:43 keithp Exp $
.TH GTF 1 __vendorversion__
.SH NAME
gtf - calculate VESA GTF mode lines
@@ -9,14 +10,14 @@ gtf - calculate VESA GTF mode lines
.I refresh
.RB [ \-v | \-\-verbose ]
.RB [ \-f | \-\-fbmode ]
-.RB [ \-x | \-\-xf86mode ]
+.RB [ \-x | \-\-xorgmode ]
.SH DESCRIPTION
.I Gtf
is a utility for calculating VESA GTF modes. Given the desired
horizontal and vertical resolutions and refresh rate (in Hz), the parameters
for a matching VESA GTF mode are printed out. Two output formats are
-supported: mode lines suitable for the XFree86
-.B XF86Config(__filemansuffix__)
+supported: mode lines suitable for the __xservername__
+.B __xconfigfile__(__filemansuffix__)
file, and mode parameters suitable for the Linux
.B fbset(8)
utility.
@@ -27,15 +28,15 @@ utility.
Enable verbose printouts This shows a trace for each step of the
computation.
.TP 8
-.BR \-x | \-\-xf86mode
-Print the mode parameters as XFree86-style mode lines. This is the
+.BR \-x | \-\-xorgmode
+Print the mode parameters as __xservername__-style mode lines. This is the
default format.
.TP 8
.BR \-f | \-\-fbset
Print the mode parameters in a format suitable for
.BR fbset(8) .
.SH "SEE ALSO"
-XF86Config(__filemansuffix__)
+__xconfigfile__(__filemansuffix__)
.SH AUTHOR
Andy Ritger.
.PP
diff --git a/hw/xfree86/utils/xorgcfg/TODO b/hw/xfree86/utils/xorgcfg/TODO
index b830f7529..d8d1cd5ee 100644
--- a/hw/xfree86/utils/xorgcfg/TODO
+++ b/hw/xfree86/utils/xorgcfg/TODO
@@ -5,7 +5,7 @@ o Have code to fetch the SymTabRec chipset list from a video driver.
Cards file "uptodate" state can also be verified.
Probably it is better to forgot about the Cards file, and
either parse the output of scanpci, or link libscanpci.a
- (and whatever else be required) in xf86cfg.
+ (and whatever else be required) in xorgcfg.
o Check if a module is "certified", there was some talk about a
certification process in the past.
@@ -15,7 +15,7 @@ o Rewrite mouse driver to use the same code as video drivers, so that
This would also require rewriting all existing input device modules.
(Probably most of this can be made with cpp macros).
-o Create a protocol to allow 3rd part xf86cfg modules.
+o Create a protocol to allow 3rd part xorgcfg modules.
o Write an interface for testing extensions/accel, maybe a frontend to
xdpyinfo, x11perf, glxinfo, etc.
@@ -26,8 +26,8 @@ o Write a "wizard" mode, as several users find the graphical interface
o Write code to use a Monitors database, either update the old Monitors
file or use RedHat MonitorsDB.
Chris Morgan is writting code to use MonitorsDB.
- If xf86cfg could be changed to ddcprobe (in all supported platforms),
+ If xorgcfg could be changed to ddcprobe (in all supported platforms),
it would be even be a better solution than using a database.
o Add interface to allow changing comments without the need of editing
- XF86Config with a text editor.
+ config file with a text editor.
diff --git a/hw/xfree86/utils/xorgcfg/XOrgCfg.pre b/hw/xfree86/utils/xorgcfg/XOrgCfg.pre
new file mode 100644
index 000000000..580998cb3
--- /dev/null
+++ b/hw/xfree86/utils/xorgcfg/XOrgCfg.pre
@@ -0,0 +1,1851 @@
+!!
+!! Copyright (c) 2000 by Conectiva S.A. (http://www.conectiva.com)
+!!
+!! Permission is hereby granted, free of charge, to any person obtaining a
+!! copy of this software and associated documentation files (the "Software"),
+!! to deal in the Software without restriction, including without limitation
+!! the rights to use, copy, modify, merge, publish, distribute, sublicense,
+!! and/or sell copies of the Software, and to permit persons to whom the
+!! Software is furnished to do so, subject to the following conditions:
+!!
+!! The above copyright notice and this permission notice shall be included in
+!! all copies or substantial portions of the Software.
+!!
+!! THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+!! IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+!! FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+!! CONECTIVA LINUX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+!! WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+!! OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+!! SOFTWARE.
+!!
+!! Except as contained in this notice, the name of Conectiva Linux shall
+!! not be used in advertising or otherwise to promote the sale, use or other
+!! dealings in this Software without prior written authorization from
+!! Conectiva Linux.
+!!
+!! Author: Paulo César Pereira de Andrade <pcpa@conectiva.com.br>
+!!
+!! $XFree86: xc/programs/Xserver/hw/xfree86/xf86cfg/XF86Cfg.ad,v 1.13 2001/05/15 18:22:23 paulo Exp $
+!!
+
+*Form.background: gray85
+*Label.background: gray85
+!! keyboard
+*Core.background: gray85
+*Label.foreground: gray20
+*Command.background: gray80
+*Command.foreground: gray20
+*Command.borderWidth: 0
+*Command.displayList:\
+foreground gray60;\
+lines 1,-1,-1,-1,-1,1;\
+foreground gray90;\
+lines -1,0,0,0,0,-1
+
+*Text.?.foreground: gray20
+*Text.borderWidth: 0
+*Text.background: gray96
+*Text.?.cursorColor: rgb:d/5/5
+*Text.displayList:\
+foreground white;\
+lines 1,-1,-1,-1,-1,1;\
+foreground gray40;\
+lines -1,0,0,0,0,-1
+
+*baseTranslations: #override \
+<Key>Escape: vidmode-restore()
+
+*List.background: gray96
+*List.foreground: gray20
+*Viewport.borderColor: gray40
+*List.borderColor: gray40
+
+*MenuButton.background: gray80
+*MenuButton.foreground: gray20
+*MenuButton.borderWidth: 0
+*MenuButton.displayList:\
+line-style solid;\
+foreground gray40;\
+lines 1,-1,-1,-1,-1,1;\
+foreground gray90;\
+lines -1,0,0,0,0,-1;\
+line-style onoffdash;\
+foreground gray80;\
+draw-rect 1,1,-2,-2
+
+*SimpleMenu.background: gray80
+*SimpleMenu.?.foreground: gray20
+*SimpleMenu.borderWidth: 0
+*SimpleMenu.displayList:\
+foreground gray40;\
+lines 1,-1,-1,-1,-1,1;\
+foreground gray90;\
+lines -1,0,0,0,0,-1
+
+*Dialog.displayList:\
+foreground gray40;\
+lines 1,-1,-1,-1,-1,1;\
+foreground gray90;\
+lines -1,0,0,0,0,-1
+
+*Toggle.background: gray80
+*Toggle.foreground: gray20
+*Toggle.borderWidth: 0
+*Toggle.displayList:\
+foreground gray90;\
+lines 1,-1,-1,-1,-1,1;\
+foreground gray40;\
+lines -1,0,0,0,0,-1
+
+*mouse.bitmap: mouse.xbm
+*keyboard.bitmap: keyboard.xbm
+*card.bitmap: card.xbm
+*monitor.bitmap: monitor.xbm
+
+*Label.borderWidth: 0
+*Viewport.forceBars: True
+*Viewport.allowVert: True
+*Viewport.useRight: True
+
+.xf86cfg.geometry: 320x400
+.xf86cfg.minWidth: 320
+.xf86cfg.minHeight: 400
+.xf86cfg.maxWidth: 320
+.xf86cfg.maxHeight: 400
+
+.xf86cfg.config.geometry: 320x369
+.xf86cfg.config.minWidth: 320
+.xf86cfg.config.maxWidth: 320
+.xf86cfg.config.minHeight: 369
+.xf86cfg.config.maxHeight: 369
+
+*work.width: 320
+*work.height: 240
+
+*error.label.label:\
+Not all required fields\n\
+were filled, or the specified\n\
+identifier is duplicated.
+*error.label.vertDistance: 30
+*error.label.borderWidth: 0
+*error.label.leftBitmap: Excl
+*error.command.fromVert: label
+*error.command.label: Ok
+*error.command.vertDistance: 20
+
+*Scrollbar.translations:\
+<BtnDown>: StartScroll(Continuous) MoveThumb() NotifyThumb()\n\
+<BtnMotion>: MoveThumb() NotifyThumb()\n\
+<BtnUp>: NotifyScroll(Proportional) EndScroll()
+
+*Scrollbar.background: gray80
+*Scrollbar.foreground: rgb:a/5/5
+*Scrollbar.borderWidth: 0
+*Scrollbar.thumb: vlines2
+*Scrollbar.displayList:\
+foreground gray90;\
+lines 1,-1,-1,-1,-1,1;\
+foreground gray40;\
+lines -1,0,0,0,0,-1
+
+*Text.Translations: #override \
+<Enter>: no-op()\n\
+<Leave>: no-op()\n\
+<Btn1Down>: set-keyboard-focus() select-start()
+
+*top.identifier.Translations: #override \
+<Enter>: no-op()\n\
+<Leave>: no-op()\n\
+<Key>Return: no-op()\n\
+<Btn1Down>: set-keyboard-focus() select-start()
+
+*List.showCurrent: True
+*Tip.timeout: 100
+*Tip.background: rgb:f/f/8
+*Tip.foreground: gray20
+*Tip.borderWidth: 0
+*Tip.displayList:\
+foreground rgb:8/8/4;\
+lines 1,-1,-1,-1,-1,1;\
+foreground rgb:f/f/c;\
+lines -1,0,0,0,0,-1
+
+*Toggle.internalHeight: 2
+*Toggle.internalWidth: 2
+*mouse.label: Mouse
+*keyboard.label: Keyboard
+*card.label: Card
+*monitor.label: Monitor
+
+*commands.borderWidth: 0
+*commands.defaultDistance: 2
+*commands.?.bottom: chainTop
+*commands.height: 50
+
+*commands.keyboard.fromHoriz: mouse
+*card.fromHoriz: keyboard
+*monitor.fromHoriz: card
+
+*commands.mouse*new.label: Add new mouse
+*commands.keyboard*new.label: Add new keyboard
+*commands.card*new.label: Add new video card
+*commands.monitor*new.label: Add new monitor
+*commands.mouse*configure.label: Configure mouse(s)
+*commands.keyboard*configure.label: Configure keyboard(s)
+*commands.card*configure.label: Configure video card(s)
+*commands.monitor*configure.label: Configure monitor(s)
+*commands.mouse*SimpleMenu*newMouse.label: New mouse
+*commands.keyboard*SimpleMenu*newKeyboard.label:New keyboard
+*commands.card*SimpleMenu*newcard.label: New card
+*commands.monitor*SimpleMenu*newMonitor.label: New monitor
+
+*commands.MenuButton.translations: \
+<Enter>: highlight()\n\
+<Leave>: reset()\n\
+Any<BtnDown>: highlight() set() PopupMenu()
+
+*hpane.showGrip: False
+*hpane.expert.label: Expert Mode
+*topM.min: 200
+*topM.max: 200
+*topM.justify: left
+*topM.label: Configure Layout
+*topM*layout.label: Configure Layout
+*topM*screen.label: Configure Screen
+*topM*modeline.label: Configure Modeline
+*topM*accessx.label: Configure AccessX
+*topM.showGrip: False
+*work.showGrip: False
+
+*MenuButton.leftBitmap: menu10
+*SmeBSB.HorizontalMargins: 18
+
+*back.label: << Back
+*next.label: Next >>
+*ok.label: Ok
+*cancel.label: Cancel
+*yes.label: Yes
+*no.label: No
+
+*help.label: Help
+*quit.label: Quit
+*next.fromHoriz: back
+*config*ok.fromHoriz: next
+*bottom*cancel.fromHoriz: ok
+*top.displayList:\
+foreground gray60;\
+lines 1,-1,-1,-1,-1,1;\
+foreground white;\
+lines -1,0,0,0,0,-1
+*bottom.displayList:\
+foreground gray60;\
+lines 1,-1,-1,-1,-1,1;\
+foreground white;\
+lines -1,0,0,0,0,-1
+*work.displayList:\
+foreground gray60;\
+lines 1,-1,-1,-1,-1,1;\
+foreground white;\
+lines -1,0,0,0,0,-1
+*options.pane.Form.displayList:\
+foreground gray60;\
+lines 1,-1,-1,-1,-1,1;\
+foreground white;\
+lines -1,0,0,0,0,-1
+
+*top.label.label: Identifier:
+*top.label.borderWidth: 0
+*top.identifier.fromHoriz: label
+*top.label.internalHeight: 3
+*top.label.justify: left
+*top.label.left: chainLeft
+*top.label.right: chainLeft
+*top.identifier.left: chainLeft
+*top.identifier.right: chainRight
+
+*bottom.layout.translations: #override \
+<Key>Return: rename-layout()
+*bottom.layout.label: New server layout
+*bottom.layout.tip: Type a text and press Return to rename this layout
+*bottom.Command.height: 19
+*bottom.Text.height: 19
+*bottom.MenuButton.height: 19
+*bottom*new.label: New server layout
+*layout.fromHoriz: select
+*help.fromHoriz: layout
+*bottom.layout.justify: left
+*bottom.select.label: Layout
+*bottom.select.left: chainLeft
+*bottom.select.right: chainLeft
+*bottom.layout.left: chainLeft
+*quit.fromHoriz: help
+*bottom.?.left: chainRight
+*bottom.?.right: chainRight
+*bottom.?.top: chainBottom
+*bottom.?.bottom: chainBottom
+
+*pane.bottom.min: 30
+*pane.bottom.max: 30
+*pane.bottom.showGrip: False
+*pane.bottom.defaultDistance: 5
+
+!! Wellcome message
+*work.wellcome.borderWidth: 0
+*work.wellcome.label: Welcome to __VENDORNAME__ 4.0 setup program
+*work.?.borderWidth: 0
+!*work.?.width: 310
+*work.?.height: 290
+
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! mouseDP widget
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+*mouseDP*Label.internalHeight: 0
+*mouseDP*Label.borderWidth: 0
+*mouseDP.labelD.vertDistance: 0
+*mouseDP.labelD.label: Select mouse device
+*mouseDP.device.fromVert: labelD
+*mouseDP.viewportD.fromVert: device
+*mouseDP.device.width: 302
+*mouseDP.viewportD.vertDistance: 2
+*mouseDP.viewportD.listD.longest: 135
+*mouseDP.viewportD.width: 302
+*mouseDP.viewportD.height: 87
+*mouseDP.labelP.label: Select mouse protocol
+*mouseDP.labelP.vertDistance: 10
+*mouseDP.labelP.fromVert: viewportD
+*mouseDP.viewportP.fromVert: labelP
+*mouseDP.viewportP.forceBars: True
+*mouseDP.viewportP.allowVert: True
+*mouseDP.viewportP.useRight: True
+*mouseDP.viewportP.listP.longest: 135
+*mouseDP.viewportP.width: 302
+*mouseDP.viewportP.height: 110
+*mouseDP.viewportP.vertDistance: 6
+*mouseDP*List.verticalList: True
+*mouseDP.emulate3.fromVert: viewportP
+*mouseDP.emulate3.width: 180
+*mouseDP.apply.label: Apply changes
+*mouseDP.apply.fromVert: viewportP
+*mouseDP.apply.fromHoriz: emulate3
+*mouseDP.apply.width: 116
+*mouseDP.emulate3.vertDistance: 10
+*mouseDP.apply.vertDistance: 10
+*mouseDP.emulate3.label: Emulate 3 buttons
+*mouseDP.emulate3.tip: Select if your mouse has only two buttons
+
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! keyboardML widget
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+*keyboardML.Label.vertDistance: 8
+*keyboardML.MenuButton.vertDistance: 8
+*keyboardML.keyboard.vertDistance: 10
+*keyboardML.Label.borderWidth: 0
+*keyboardML.Label.width: 115
+*keyboardML.MenuButton.width: 185
+*keyboardML.MenuButton.justify: left
+*keyboardML.Label.internalWidth: 0
+*keyboardML.Label.justify: right
+*keyboardML.labelR.label: Xkb rules:
+*keyboardML.rules.left: chainRight
+*keyboardML.rules.right: chainRight
+*keyboardML.rules.fromHoriz: labelR
+*keyboardML.model.fromVert: rules
+*keyboardML.labelM.fromVert: rules
+*keyboardML.model.left: chainRight
+*keyboardML.model.right: chainRight
+*keyboardML.model.fromHoriz: labelM
+*keyboardML.labelM.label: Keyboard model:
+*keyboardML.layout.left: chainRight
+*keyboardML.layout.right: chainRight
+*keyboardML.layout.fromVert: model
+*keyboardML.labelL.fromVert: model
+*keyboardML.layout.fromHoriz: labelL
+*keyboardML.labelL.label: Keyboard layout:
+*keyboardML.variant.fromVert: labelL
+*keyboardML.variant.fromHoriz: labelV
+*keyboardML.labelV.fromVert: labelL
+*keyboardML.labelV.label: Xkb variant:
+*keyboardML.options.fromVert: labelV
+*keyboardML.options.fromHoriz: labelO
+*keyboardML.labelO.fromVert: labelV
+*keyboardML.labelO.label: Xkb options:
+*keyboardML.keyboard.fromVert: labelO
+*keyboardML.keyboard.borderWidth: 0
+*keyboardML.keyboard.width: 305
+*keyboardML.keyboard.height: 121
+*keyboardML.apply.vertDistance: 16
+*keyboardML.apply.fromVert: keyboard
+*keyboardML.apply.label: Apply changes
+
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! cardModel widget
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+*cardModel.label.internalHeight: 0
+*cardModel.keyboard.borderWidth: 0
+*cardModel.label.label: Card model filter
+*cardModel.label.internalHeight: 2
+*cardModel.label.borderWidth: 0
+*cardModel.viewport.vertDistance: 2
+*cardModel.viewport.fromVert: filter
+*cardModel.filter.fromHoriz: label
+*cardModel.filter.width: 171
+*cardModel.viewport.width: 302
+*cardModel.viewport.height: 212
+*cardModel.driver.justify: left
+*cardModel.driverL.label: Driver
+*cardModel.driverL.fromVert: viewport
+*cardModel.driverL.width: 50
+*cardModel.driverL.justify: right
+*cardModel.driver.fromVert: viewport
+*cardModel.driver.fromHoriz: driverL
+*cardModel.driver.width: 250
+*cardModel.driver.left: chainRight
+*cardModel.driver.right: chainRight
+*cardModel.busidL.label: BusID
+*cardModel.busidL.fromVert: driver
+*cardModel.busidL.width: 50
+*cardModel.busidL.justify: right
+*cardModel.busid.fromVert: driver
+*cardModel.busid.fromHoriz: busidL
+*cardModel.busid.width: 250
+*cardModel.busid.left: chainRight
+*cardModel.busid.right: chainRight
+*cardModel.viewport.forceBars: True
+*cardModel.viewport.allowVert: True
+*cardModel.viewport.useRight: True
+*cardModel.viewport.list.longest: 277
+*cardModel.filter.tip: Type name or vendor of your card and press enter
+*cardModel.filter.translations: #override \
+<Key>Return: filter-card()
+
+
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! main widget
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+*work.cpu.backgroundPixmap: computer.xpm
+*work.mouse.backgroundPixmap: mouse.xpm
+*work.keyboard.backgroundPixmap: keyboard.xpm
+*work.card.backgroundPixmap: card.xpm
+*work.monitor.backgroundPixmap: monitor.xpm
+
+*work.cpu.x: 130
+*work.cpu.y: 160
+*work.cpu.width: 30
+*work.cpu.height: 50
+*work.mouse.width: 26
+*work.mouse.height: 35
+*work.keyboard.width: 60
+*work.keyboard.height: 28
+*work.card.width: 41
+*work.card.height: 40
+*work.monitor.width: 47
+*work.monitor.height: 40
+
+.xf86cfg.pane.work.Simple.borderWidth: 1
+.xf86cfg.pane.work.Simple.translations:\
+Any<Btn1Down>: select-device()\n\
+Any<Btn1Motion>: move-device()\n\
+Any<Btn1Up>: unselect-device()\n\
+Any<Btn3Down>: device-popup()\n\
+Any<Btn3Up>: device-popdown()
+
+.xf86cfg.pane.work.screen.translations:\
+Any<Btn1Down>: select-device()\n\
+Any<Btn1Motion>: move-device()\n\
+Any<Btn1Up>: unselect-device()\n\
+Any<Btn3Down>: device-popup()\n\
+Any<Btn3Up>: device-popdown()
+
+XF86Cfg.translations: #override \
+<Message>WM_PROTOCOLS: quit()
+.xf86cfg.config.translations: #override \
+<Message>WM_PROTOCOLS: config-cancel()
+.xf86cfg.options.translations: #override \
+<Message>WM_PROTOCOLS: options-cancel()
+.xf86cfg.quit.translations: #override \
+<Message>WM_PROTOCOLS: quit-cancel()
+.xf86cfg.error.translations: #override \
+<Message>WM_PROTOCOLS: error-cancel()
+.xf86cfg.force.translations: #override \
+<Message>WM_PROTOCOLS: addmode-cancel()
+.xf86cfg.addMode.translations: #override \
+<Message>WM_PROTOCOLS: addmode-cancel()
+.xf86cfg.accessx.translations: #override \
+<Message>WM_PROTOCOLS: accessx-close()
+.xf86cfg.test.translations: #override \
+<Message>WM_PROTOCOLS: testmode-cancel()
+.xf86cfg.Expert.translations: #override \
+<Message>WM_PROTOCOLS: expert-close()
+.xf86cfg.options.moduleOptions.translations: #override \
+<Message>WM_PROTOCOLS: module-options-close()
+
+
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! Options
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+.xf86cfg.options.geometry: 400x176
+.xf86cfg.options.minWidth: 400
+.xf86cfg.options.maxWidth: 400
+.xf86cfg.options.minHeight: 176
+.xf86cfg.options.maxHeight: 176
+
+*options*commands.remove.fromHoriz: add
+*options*commands.update.fromHoriz: remove
+*options*commands.help.fromHoriz: update
+*options*commands.min: 30
+*options*commands.max: 30
+*options*commands.showGrip: False
+*options*commands.defaultDistance: 4
+*options*commands.?.width: 100
+*options*commands.?.height: 20
+
+*options*name.fromHoriz: label1
+*options*label2.fromHoriz: name
+*options*value.fromHoriz: label2
+*options*label3.fromHoriz: value
+*options*viewport.fromVert: name
+*options*Label.borderWidth: 0
+*options.pane.form.Label.internalWidth: 0
+*options.pane.form.Label.height: 21
+*options.pane.form.Text.height: 19
+*options.pane.form.Label.top: chainTop
+*options.pane.form.Text.top: chainTop
+*options.pane.form.Label.bottom: chainTop
+*options.pane.form.Text.bottom: chainTop
+*options.pane.form.Label.horizDistance: 0
+*options.pane.form.Text.horizDistance: 0
+*options.pane.form.Label.vertDistance: 8
+*options.pane.form.Text.vertDistance: 8
+*options.pane.form.Text.width: 147
+*options*viewport.width: 390
+*options*viewport.height: 50
+
+*options*viewport.horizDistance: 7
+*options*label1.horizDistance: 5
+*options*viewport.left: chainLeft
+*options*viewport.right: chainRight
+*options*list.longest: 376
+
+*options*driverOpts.label: Options for module\
+*options*driverOpts.justify: left
+*options*driverOpts.width: 278
+*options*popdown.label: Popdown dialog
+*options*driverOpts.tip: This menu shows:\n\
+ o option name\n\
+ o option type
+
+.xf86cfg*options.moduleOptions.geometry: 360x245
+.xf86cfg*options.moduleOptions.minWidth: 360
+.xf86cfg*options.moduleOptions.maxWidth: 360
+.xf86cfg*options.moduleOptions.minHeight: 245
+.xf86cfg*options.moduleOptions.maxHeight: 245
+*options.moduleOptions*descriptions*labelType.label: Select option
+*options.moduleOptions*descriptions*labelType.width: 348
+*options.moduleOptions*descriptions*module.fromVert: labelType
+*options.moduleOptions*descriptions*module.label: Module
+*options.moduleOptions*descriptions*Label.horizDistance: 8
+*options.moduleOptions*descriptions*option.fromVert: labelType
+*options.moduleOptions*descriptions*option.label: Option
+*options.moduleOptions*descriptions*option.fromHoriz: viewM
+*options.moduleOptions*descriptions*viewM.fromVert: module
+*options.moduleOptions*descriptions*viewM.width: 120
+*options.moduleOptions*descriptions*viewM.height: 94
+*options.moduleOptions*descriptions*modL.longest: 100
+*options.moduleOptions*descriptions*viewO.fromHoriz: viewM
+*options.moduleOptions*descriptions*viewO.fromVert: option
+*options.moduleOptions*descriptions*viewO.width: 220
+*options.moduleOptions*descriptions*viewO.height: 94
+*options.moduleOptions*descriptions*optL.longest: 220
+*options.moduleOptions*descriptions*desc.horizDistance: 4
+*options.moduleOptions*descriptions*desc.fromVert: viewM
+*options.moduleOptions*descriptions*desc.width: 348
+*options.moduleOptions*descriptions*desc.height: 62
+*options.moduleOptions*descriptions*desc.wrap: word
+*options.moduleOptions*descriptions*desc.scrollVertical: Always
+*options.moduleOptions*descriptions*desc.Scrollbar.foreground: rgb:a/5/5
+*options.moduleOptions*descriptions*desc.Scrollbar.borderWidth: 1
+*options.moduleOptions*descriptions*desc.Scrollbar.borderColor: gray60
+*options.moduleOptions*descriptions.showGrip: False
+*options.moduleOptions*popdown.label: Popdown dialog
+
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! monitor
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+*monitorl*Viewport.width: 302
+*monitorl*Text.width: 160
+*monitorl*Text.tip:\
+Select standard value from the list\n\
+below, or enter specific value here.
+
+*monitorl*hlabel.justify: right
+*monitorl*hlabel.width: 138
+*monitorl*hlabel.label: Horizontal sync
+*monitorl*hsync.fromHoriz: hlabel
+*monitorl*hviewport.fromVert: hsync
+*monitorl*hviewport.height: 156
+*monitorl*hlist.longest: 288
+
+*monitorl*vlabel.justify: right
+*monitorl*vlabel.width: 138
+*monitorl*vlabel.vertDistance: 12
+*monitorl*vsync.vertDistance: 12
+*monitorl*vlabel.fromVert: hviewport
+*monitorl*vsync.fromVert: hviewport
+*monitorl*vlabel.label: Vertical sync
+*monitorl*vsync.fromHoriz: vlabel
+*monitorl*vviewport.fromVert: vsync
+*monitorl*vviewport.height: 20
+*monitorl*vlist.longest: 64
+
+*monitorl*clabel.vertDistance: 12
+*monitorl*clabel.fromVert: vviewport
+*monitorl*clabel.label: Select card connected to monitor
+*monitorl*cmenu.fromVert: clabel
+*monitorl*cmenu.width: 302
+*monitorl*cmenu.justify: left
+*monitorl*none.label: None
+
+!! vidtune
+*vidtune.Repeater.borderWidth: 1
+*vidtune.Repeater.borderColor: gray90
+*vidtune.Repeater.shapeStyle: ellipse
+*vidtune.Repeater.foreground: gray30
+*vidtune.Repeater.background: gray80
+*vidtune.Repeater.width: 31
+*vidtune.Repeater.height: 29
+*vidtune.Repeater.repeatDelay: 200
+*vidtune.Repeater.decay: 0
+*vidtune.Repeater.displayList:\
+line-width 2;\
+foreground gray65;\
+draw-arc 0,0,-0,-0,230,180;\
+foreground gray95;\
+draw-arc 0,0,-0,-0,40,180;\
+foreground gray80;\
+draw-arc 0,0,-0,-0,220,10;\
+draw-arc 0,0,-0,-0,40,10
+*vidtune.Repeater.translations:\
+<Enter>: set-values(1, borderColor, gray50)\n\
+<Leave>: set-values(1, borderColor, gray90)\n\
+<Btn1Down>: set-values(1, borderColor, gray90) set() start()\n\
+<Btn1Up>: stop() unset()
+*vidtune.left.bitmap: left.xbm
+*vidtune.right.bitmap: right.xbm
+*vidtune.up.bitmap: up.xbm
+*vidtune.down.bitmap: down.xbm
+*vidtune.wider.bitmap: wider.xbm
+*vidtune.narrower.bitmap: narrower.xbm
+*vidtune.shorter.bitmap: shorter.xbm
+*vidtune.taller.bitmap: taller.xbm
+
+*vidtune.vesaB.label: Add standard VESA mode to current screen
+*vidtune.vesaB.width: 312
+
+*vidtune.screenB.fromVert: mode
+*vidtune.screenB.width: 160
+*vidtune.screenB.horizDistance: 80
+*vidtune.prev.fromVert: vesaB
+*vidtune.mode.fromVert: vesaB
+*vidtune.next.fromVert: vesaB
+*vidtune.prev.horizDistance: 54
+*vidtune.prev.label: <<
+*vidtune.mode.fromHoriz: prev
+*vidtune.mode.width: 160
+*vidtune.next.label: >>
+*vidtune.next.fromHoriz: mode
+
+*vidtune.up.fromVert: screenB
+*vidtune.up.horizDistance: 143
+*vidtune.left.horizDistance: 98
+*vidtune.left.vertDistance: 16
+*vidtune.left.fromVert: up
+*vidtune.monitor.fromVert: up
+*vidtune.monitor.vertDistance: 0
+*vidtune.monitor.fromHoriz: left
+*vidtune.right.vertDistance: 16
+*vidtune.right.fromVert: up
+*vidtune.right.fromHoriz: monitor
+*vidtune.down.horizDistance: 143
+*vidtune.down.fromVert: monitor
+*vidtune.wider.fromVert: left
+*vidtune.wider.horizDistance: 91
+*vidtune.narrower.fromVert: down
+*vidtune.narrower.fromHoriz: wider
+*vidtune.shorter.fromVert: down
+*vidtune.shorter.fromHoriz: narrower
+*vidtune.taller.fromVert: right
+*vidtune.taller.fromHoriz: shorter
+*vidtune.monitor.width: 47
+*vidtune.monitor.height: 40
+*vidtune.monitor.backgroundPixmap: monitor.xpm
+*vidtune.narrower.horizDistance: 0
+*vidtune.shorter.horizDistance: 2
+*vidtune.taller.horizDistance: 0
+*vidtune.wider.vertDistance: 20
+*vidtune.taller.vertDistance: 20
+*vidtune.narrower.vertDistance: 0
+*vidtune.shorter.vertDistance: 0
+*vidtune.down.vertDistance: 0
+
+*vidtune.monitor.tip:\
+\ WARNING\n\
+\ Using the controls here may damage your\n\
+monitor. You can safely skip this section\n\
+of the configuration process.\n\
+\n\
+Press ESC if your monitor goes out of sync.
+
+*vidtune.background: white
+*vidtune.form.borderWidth: 0
+*vidtune.form.background: white
+*vidtune.form.defaultDistance: 0
+*vidtune.form.vertDistance: 3
+*vidtune.form.horizDistance: 4
+*vidtune.form.Label.foreground: gray20
+*vidtune.form.Label.background: white
+*vidtune.form.Label.font: -*-fixed-*-*-*-*-10-*-*-*-*-*-*-1
+*vidtune.form.Label.vertDistance: 0
+*vidtune*Label.justify: right
+
+*vidtune.form.fromVert: auto
+*vidtune*hsyncstart.label: HSyncStart:
+*vidtune*hsyncstart.width: 95
+*vidtune*v-hsyncstart.width: 40
+*vidtune*v-hsyncstart.fromHoriz: hsyncstart
+*vidtune*vsyncstart.fromHoriz: v-hsyncstart
+*vidtune*v-vsyncstart.fromHoriz: vsyncstart
+*vidtune*vsyncstart.label: VSyncStart:
+*vidtune*vsyncstart.width: 95
+*vidtune*v-vsyncstart.width: 40
+*vidtune*hsyncend.label: HSyncEnd:
+*vidtune*hsyncend.width: 95
+*vidtune*v-hsyncend.width: 40
+*vidtune*v-hsyncend.fromHoriz: hsyncend
+*vidtune*hsyncend.fromVert: hsyncstart
+*vidtune*v-hsyncend.fromVert: v-hsyncstart
+*vidtune*vsyncend.label: VSyncEnd:
+*vidtune*vsyncend.width: 95
+*vidtune*v-vsyncend.width: 40
+*vidtune*vsyncend.fromHoriz: v-hsyncend
+*vidtune*v-vsyncend.fromHoriz: vsyncend
+*vidtune*vsyncend.fromVert: hsyncstart
+*vidtune*v-vsyncend.fromVert: v-vsyncstart
+*vidtune*htotal.label: HTotal:
+*vidtune*htotal.width: 95
+*vidtune*v-htotal.width: 40
+*vidtune*v-htotal.fromHoriz: htotal
+*vidtune*htotal.fromVert: hsyncend
+*vidtune*v-htotal.fromVert: v-hsyncend
+*vidtune*vtotal.label: VTotal:
+*vidtune*vtotal.width: 95
+*vidtune*v-vtotal.width: 40
+*vidtune*vtotal.fromHoriz: v-htotal
+*vidtune*v-vtotal.fromHoriz: vtotal
+*vidtune*vtotal.fromVert: vsyncend
+*vidtune*v-vtotal.fromVert: v-vsyncend
+*vidtune*flags.label: Flags:
+*vidtune*flags.width: 142
+*vidtune*v-flags.width: 156
+*vidtune*v-flags.justify: left
+*vidtune*v-flags.fromHoriz: flags
+*vidtune*flags.fromVert: vtotal
+*vidtune*v-flags.fromVert: v-vtotal
+*vidtune*clock.label: Pixel Clock (MHz):
+*vidtune*clock.width: 142
+*vidtune*v-clock.width: 48
+*vidtune*v-clock.fromHoriz: clock
+*vidtune*clock.fromVert: flags
+*vidtune*v-clock.fromVert: v-flags
+*vidtune*hsync.label: Horizontal Sync (kHz):
+*vidtune*hsync.width: 142
+*vidtune*v-hsync.width: 48
+*vidtune*v-hsync.fromHoriz: hsync
+*vidtune*hsync.fromVert: clock
+*vidtune*v-hsync.fromVert: v-clock
+*vidtune*vsync.label: Vertical Sync (Hz):
+*vidtune*vsync.width: 142
+*vidtune*v-vsync.width: 48
+*vidtune*v-vsync.fromHoriz: vsync
+*vidtune*vsync.fromVert: hsync
+*vidtune*v-vsync.fromVert: v-hsync
+
+*vidtune.auto.horizDistance: 43
+*vidtune.auto.fromVert: narrower
+*vidtune.auto.label: Auto
+!*vidtune.auto.state: True
+*vidtune.apply.fromVert: narrower
+*vidtune.apply.fromHoriz: auto
+*vidtune.apply.label: Apply
+*vidtune.restore.fromHoriz: apply
+*vidtune.restore.horizDistance: 4
+*vidtune.restore.fromVert: narrower
+*vidtune.restore.label: Restore
+*vidtune.update.fromVert: narrower
+*vidtune.update.fromHoriz: restore
+*vidtune.update.label: Update
+*vidtune.test.fromVert: narrower
+*vidtune.test.fromHoriz: update
+*vidtune.test.label: Test
+
+*vidtune.Label.background: white
+*vidtune.addto.vertDistance: 4
+*vidtune.addto.fromHoriz: add
+*vidtune.addto.fromVert: form
+*vidtune.addto.label: mode to
+*vidtune.addto.horizDistance: 0
+*vidtune.ident.vertDistance: 4
+*vidtune.ident.horizDistance: 0
+*vidtune.ident.fromVert: form
+*vidtune.ident.fromHoriz: addto
+*vidtune.ident.width: 98
+*vidtune.ident.justify: left
+*vidtune.as.vertDistance: 4
+*vidtune.as.horizDistance: 0
+*vidtune.as.fromVert: form
+*vidtune.as.fromHoriz: ident
+*vidtune.as.label: as:
+*vidtune.text.vertDistance: 4
+*vidtune.text.horizDistance: 0
+*vidtune.text.fromVert: form
+*vidtune.text.fromHoriz: as
+*vidtune.text.width: 98
+*vidtune.add.vertDistance: 4
+*vidtune.add.fromVert: form
+*vidtune.add.label: Add
+.xf86cfg.force.geometry: 268x58
+.xf86cfg.force.minWidth: 268
+.xf86cfg.force.maxWidth: 268
+.xf86cfg.force.minHeight: 58
+.xf86cfg.force.maxHeight: 58
+.xf86cfg.force.?.label: There is already a modeline with the\n\
+specified identifier. Add anyway?
+
+.xf86cfg.addMode.geometry: 350x80
+.xf86cfg.addMode.minWidth: 350
+.xf86cfg.addMode.maxWidth: 350
+.xf86cfg.addMode.minHeight: 80
+.xf86cfg.addMode.maxHeight: 80
+.xf86cfg.addMode.?.label: XF86VidModeAddModeLine returned True,\n\
+but no modeline was added to the current Screen.\n\
+Do you want to add it to the Monitor section?
+
+.xf86cfg.test.?.label: \ Testing modeline...\n\n\
+Press ESC or stop button to quit.
+.xf86cfg.test.geometry: 250x72
+.xf86cfg.test.minWidth: 250
+.xf86cfg.test.maxWidth: 250
+.xf86cfg.test.minHeight: 72
+.xf86cfg.test.maxHeight: 72
+
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! screen
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+*screenD*depthL.label: Default color depth:
+*screenD*depthL.height: 20
+*screenD*1.fromHoriz: depthL
+*screenD*4.fromHoriz: 1
+*screenD*8.fromHoriz: 4
+*screenD*16.fromHoriz: 8
+*screenD*24.fromHoriz: 16
+*screenD*1.width: 24
+*screenD*4.width: 24
+*screenD*8.width: 24
+*screenD*16.width: 24
+*screenD*24.width: 24
+*screenD*1.horizDistance: 5
+*screenD*4.horizDistance: 5
+*screenD*8.horizDistance: 5
+*screenD*16.horizDistance: 5
+*screenD*24.horizDistance: 5
+*screenD*modeL.fromVert: depthL
+*screenD*modeL.vertDistance: 14
+*screenD*modeL.label: Select resolution(s):
+*screenD*viewL.fromVert: modeL
+*screenD*select.fromHoriz: viewL
+*screenD*unselect.fromHoriz: viewL
+*screenD*select.fromVert: modeL
+*screenD*unselect.fromVert: select
+*screenD*up.fromHoriz: viewL
+*screenD*down.fromHoriz: viewL
+*screenD*up.fromVert: unselect
+*screenD*down.fromVert: up
+*screenD*viewR.fromHoriz: select
+*screenD*viewR.fromVert: modeL
+*screenD*select.bitmap: right.xbm
+*screenD*unselect.bitmap: left.xbm
+*screenD*up.bitmap: up.xbm
+*screenD*down.bitmap: down.xbm
+*screenD*viewL.width: 133
+*screenD*viewR.width: 133
+*screenD*viewL.height: 184
+*screenD*viewR.height: 184
+*screenD*listLeft.longest: 128
+*screenD*listRight.longest: 128
+*screenD*rotate.tip: Don't select any option if\n\
+your monitor is not rotated.
+*screenD*rotate.vertDistance: 14
+*screenD*rotate.fromVert: viewL
+*screenD*rotate.label: Rotate screen:
+*screenD*CW.tip: Clock wise
+*screenD*CW.vertDistance: 14
+*screenD*CW.fromVert: viewL
+*screenD*CW.fromHoriz: rotate
+*screenD*CW.label: CW
+*screenD*CW.width: 40
+*screenD*CCW.tip: Counter-clock wise
+*screenD*CCW.vertDistance: 14
+*screenD*CCW.fromVert: viewL
+*screenD*CCW.fromHoriz: CW
+*screenD*CCW.label: CCW
+*screenD*CCW.width: 40
+
+*work.screen.width: 100
+*work.screen.height: 80
+
+
+*Dialog.background: gray85
+*quit.ask.label: Write configuration to
+*quit.ask.value.translations: #override \
+<Key>Return: write-config()
+*quit.ask.label.justify: left
+*quit.ask.value.width: 222
+*quit.ask.icon: Excl
+.xf86cfg.quit.geometry: 230x92
+.xf86cfg.quit.minWidth: 230
+.xf86cfg.quit.maxWidth: 230
+.xf86cfg.quit.minHeight: 92
+.xf86cfg.quit.maxHeight: 92
+
+*error.notice.label: Failed to write configuration file.
+.xf86cfg.error.geometry: 280x50
+.xf86cfg.error.minWidth: 260
+.xf86cfg.error.maxWidth: 260
+.xf86cfg.error.minHeight: 50
+.xf86cfg.error.maxHeight: 50
+
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!! accessx
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+*Accessx*Label.font: -*-fixed-medium-r-*-*-13-*-*-*-*-*-iso8859-1
+*Accessx.Form.Toggle.font: -*-fixed-medium-r-*-*-13-*-*-*-*-*-iso8859-1
+*Accessx*Label.background: white
+*Accessx*Label.justify: left
+*Accessx*Label.internalHeight: 0
+*Accessx*Label.internalWidth: 0
+*Accessx*Label.foreground: gray35
+*Accessx*Toggle.internalHeight: 0
+*Accessx.Toggle.internalWidth: 18
+*Accessx.Toggle.justify: left
+*Accessx.Toggle.foreground: gray30
+*Accessx.Toggle.background: white
+*Accessx*Toggle.highlightThickness: 0
+*Accessx.Toggle.foreground: rgb:f/7/7
+*Accessx.Toggle.displayList:\
+foreground white;\
+points 0,0,-1,0;\
+foreground rgb:f/7/7;\
+fill-poly 0,2,0,-3,8,6
+*Accessx.Toggle.translations: \
+<Btn1Down>,<Btn1Up>: toggle() notify()\n\
+<Enter>: set-values(1, displayList, "foreground white;points 0,0,-1,0;fill-poly 0,1,10,6,0,-2;foreground rgb:7/7/f;fill-poly 0,2,0,-3,8,6")\n\
+<Leave>: set-values(1, displayList, "foreground white;points 0,0,-1,0;foreground rgb:f/7/7;fill-poly 0,2,0,-3,8,6")
+*Accessx.Form.borderWidth: 1
+*Accessx.Form.borderColor: rgb:f/a/a
+*Accessx.Form.vertDistance: 0
+*Accessx.Form.defaultDistance: 2
+*Accessx.borderWidth: 0
+*accessxForm.background: white
+*Accessx*Form.background: white
+*Accessx.background: white
+*accessxForm.enable.label: Enable AccessX
+*accessxForm.enable.width: 208
+*accessxForm.apply.fromHoriz: enable
+*accessxForm.apply.label: Apply changes
+*accessxForm.Accessx.fromVert: enable
+*Accessx.timeoutToggle.background: white
+*Accessx.timeoutToggle.foreground: rgb:7/7/f
+*Accessx.timeoutToggle.displayList:\
+foreground rgb:a/a/f;\
+lines 1,-1,-1,-1,-1,1;\
+foreground rgb:2/2/a;\
+lines -1,0,0,0,0,-1
+
+*Accessx.Form.Toggle.background: white
+*Accessx.Form.Toggle.foreground: rgb:7/7/f
+*Accessx.Form.Toggle.displayList:\
+foreground rgb:a/a/f;\
+lines 1,-1,-1,-1,-1,1;\
+foreground rgb:2/2/a;\
+lines -1,0,0,0,0,-1
+*Accessx.Form.Toggle.translations: \
+<Btn1Down>,<Btn1Up>: toggle() notify()\n\
+<Enter>: set-values(1, displayList, "foreground rgb:a/a/f;lines 1,-1,-1,-1,-1,1;foreground rgb:2/2/a;lines -1,0,0,0,0,-1;foreground rgb:f/7/7;draw-rect 1,1,-2,-2")\n\
+<Leave>: set-values(1, displayList, "foreground rgb:a/a/f;lines 1,-1,-1,-1,-1,1;foreground rgb:2/2/a;lines -1,0,0,0,0,-1")
+
+*Accessx.timeoutToggle.internalWidth: 4
+*Accessx.timeoutToggle.translations:\
+<Btn1Down>,<Btn1Up>: toggle() notify()
+*Accessx.timeoutToggle.internalWidth: 4
+*Accessx.timeoutToggle.internalHeight: 1
+*Accessx.timeoutToggle.vertDistance: 6
+*Accessx.timeoutToggle.label: Time Out
+*Accessx.timeoutLabel.fromHoriz: timeoutToggle
+*Accessx.timeoutLabel.vertDistance: 7
+*Accessx.timeoutLabel.label: Time (min)
+*Accessx.Label.background: white
+*Accessx.timeoutNumber.vertDistance: 1
+*Accessx.timeoutNumber.fromHoriz: timeoutLabel
+*Accessx.timeoutNumber.font: 6x9
+*Accessx.timeoutNumber.label: ??
+*Accessx.timeoutScroller.fromVert: timeoutNumber
+*Accessx.timeoutScroller.fromHoriz: timeoutLabel
+*Accessx.timeoutScroller.width: 133
+*Accessx.timeoutScroller.horizDistance: 31
+*Accessx*Scrollbar.vertDistance: 0
+*Accessx*Scrollbar.orientation: horizontal
+*Accessx*Scrollbar.thumb: black
+*Accessx*Scrollbar.height: 8
+*Accessx*Scrollbar.minimumThumb: 5
+*Accessx*Scrollbar.borderWidth: 1
+*Accessx*Scrollbar.borderColor: white
+*Accessx*Scrollbar.foreground: rgb:f/7/7
+*Accessx*Scrollbar.background: gray95
+*Accessx*Scrollbar.displayList:\
+foreground gray80;\
+lines 1,-1,-1,-1,-1,1;\
+foreground gray90;\
+lines -1,0,0,0,0,-1
+*Accessx.sticky.fromVert: timeoutToggle
+*Accessx.sticky.vertDistance: 6
+*Accessx.sticky.label: Enable StickyKeys
+*Accessx.sticky.width: 304
+*Accessx.stickyForm.fromVert: sticky
+*Accessx.stickyForm.Toggle.width: 148
+*Accessx.stickyForm.Toggle.internalHeight: 1
+*Accessx.stickyForm.auto.label: Auto off
+*Accessx.stickyForm.beep.fromHoriz: auto
+*Accessx.stickyForm.beep.label: Modifiers beep
+*Accessx.mouseKeys.fromVert: stickyForm
+*Accessx.mouseKeys.width: 304
+*Accessx.mouseKeys.vertDistance: 6
+*Accessx.mouseKeys.label: Enable MouseKeys
+*Accessx.mouseForm.fromVert: mouseKeys
+*Accessx.mouseForm.speedLabel.vertDistance: 7
+*Accessx.mouseForm.speedLabel.label: Peak speed (pixels/sec)
+*Accessx.mouseForm.speedNumber.fromHoriz: speedLabel
+*Accessx.mouseForm.speedNumber.font: 6x9
+*Accessx.mouseForm.speedNumber.label: ???
+*Accessx.mouseForm.speedScroller.fromHoriz: speedLabel
+*Accessx.mouseForm.speedScroller.fromVert: speedNumber
+*Accessx.mouseForm.speedScroller.width: 133
+*Accessx.mouseForm.timeLabel.fromVert: speedScroller
+*Accessx.mouseForm.timeLabel.label: Time to peak (sec)
+*Accessx.mouseForm.timeLabel.vertDistance: 7
+*Accessx.mouseForm.timeNumber.label: ???
+*Accessx.mouseForm.timeNumber.fromVert: speedScroller
+*Accessx.mouseForm.timeNumber.fromHoriz: timeLabel
+*Accessx.mouseForm.timeNumber.font: 6x9
+*Accessx.mouseForm.timeScroller.fromHoriz: timeLabel
+*Accessx.mouseForm.timeScroller.fromVert: timeNumber
+*Accessx.mouseForm.timeScroller.width: 133
+*Accessx.mouseForm.timeScroller.horizDistance: 37
+*Accessx.mouseForm.delayLabel.fromVert: timeScroller
+*Accessx.mouseForm.delayLabel.label: Motion delay (sec)
+*Accessx.mouseForm.delayLabel.tip:\
+Time between the initial key press\n\
+and the first repeated motion event
+*Accessx.mouseForm.delayLabel.vertDistance: 7
+*Accessx.mouseForm.delayNumber.label: ???
+*Accessx.mouseForm.delayNumber.fromVert: timeScroller
+*Accessx.mouseForm.delayNumber.fromHoriz: delayLabel
+*Accessx.mouseForm.delayNumber.font: 6x9
+*Accessx.mouseForm.delayScroller.fromHoriz: delayLabel
+*Accessx.mouseForm.delayScroller.fromVert: delayNumber
+*Accessx.mouseForm.delayScroller.width: 133
+*Accessx.mouseForm.delayScroller.horizDistance: 37
+*Accessx.repeatKeys.fromVert: mouseForm
+*Accessx.repeatKeys.width: 304
+*Accessx.repeatKeys.vertDistance: 6
+*Accessx.repeatKeys.label: Enable RepeatKeys
+*Accessx.repeatForm.fromVert: repeatKeys
+*Accessx.repeatForm.rateLabel.vertDistance: 7
+*Accessx.repeatForm.rateLabel.label: Repeat rate (sec/key)
+*Accessx.repeatForm.rateNumber.fromHoriz: rateLabel
+*Accessx.repeatForm.rateNumber.font: 6x9
+*Accessx.repeatForm.rateNumber.label: ????
+*Accessx.repeatForm.rateScroller.fromHoriz: rateLabel
+*Accessx.repeatForm.rateScroller.fromVert: rateNumber
+*Accessx.repeatForm.rateScroller.width: 133
+*Accessx.repeatForm.rateScroller.horizDistance: 16
+*Accessx.repeatForm.delayLabel.fromVert: rateScroller
+*Accessx.repeatForm.delayLabel.label: Repeat delay (sec)
+*Accessx.repeatForm.delayLabel.vertDistance: 7
+*Accessx.repeatForm.delayNumber.label: ????
+*Accessx.repeatForm.delayNumber.fromVert: rateScroller
+*Accessx.repeatForm.delayNumber.fromHoriz: delayLabel
+*Accessx.repeatForm.delayNumber.font: 6x9
+*Accessx.repeatForm.delayScroller.fromHoriz: delayLabel
+*Accessx.repeatForm.delayScroller.fromVert: delayNumber
+*Accessx.repeatForm.delayScroller.width: 133
+*Accessx.repeatForm.delayScroller.horizDistance: 37
+*Accessx.slow.fromVert: repeatForm
+*Accessx.slow.vertDistance: 6
+*Accessx.slow.label: Enable SlowKeys
+*Accessx.slow.width: 304
+*Accessx.slowForm.fromVert: slow
+*Accessx.slowForm.Toggle.horizDistance: 4
+*Accessx.slowForm.Toggle.internalWidth: 4
+*Accessx.slowForm.Toggle.internalHeight: 1
+*Accessx.slowForm.beep.label: Beep when key is
+*Accessx.slowForm.beep.vertDistance: 3
+*Accessx.slowForm.pressed.fromHoriz: beep
+*Accessx.slowForm.pressed.label: pressed
+*Accessx.slowForm.accepted.fromHoriz: pressed
+*Accessx.slowForm.accepted.label: accepted
+*Accessx.slowForm.slowLabel.fromVert: accepted
+*Accessx.slowForm.slowLabel.label: Key delay (sec)
+*Accessx.slowForm.slowLabel.vertDistance: 7
+*Accessx.slowForm.slowNumber.label: ???
+*Accessx.slowForm.slowNumber.fromVert: accepted
+*Accessx.slowForm.slowNumber.fromHoriz: slowLabel
+*Accessx.slowForm.slowNumber.font: 6x9
+*Accessx.slowForm.slowScroller.fromHoriz: slowLabel
+*Accessx.slowForm.slowScroller.fromVert: slowNumber
+*Accessx.slowForm.slowScroller.width: 133
+*Accessx.slowForm.slowScroller.horizDistance: 58
+*Accessx.bounce.fromVert: slowForm
+*Accessx.bounce.vertDistance: 6
+*Accessx.bounce.label: Enable BounceKeys
+*Accessx.bounce.width: 304
+*Accessx.bounceForm.fromVert: bounce
+*Accessx.bounceForm.bounceLabel.label: Debounce time (sec)
+*Accessx.bounceForm.bounceLabel.vertDistance: 7
+*Accessx.bounceForm.bounceNumber.label: ???
+*Accessx.bounceForm.bounceNumber.fromHoriz: bounceLabel
+*Accessx.bounceForm.bounceNumber.font: 6x9
+*Accessx.bounceForm.bounceScroller.fromHoriz: bounceLabel
+*Accessx.bounceForm.bounceScroller.fromVert: bounceNumber
+*Accessx.bounceForm.bounceScroller.width: 133
+*Accessx.bounceForm.bounceScroller.horizDistance: 30
+
+*accessx.geometry: 220x253
+*accessx.minWidth: 220
+*accessx.maxWidth: 220
+*accessx.minHeight: 253
+*accessx.maxHeight: 253
+*accessx*lock.fromVert: label
+*accessx*div.fromVert: label
+*accessx*div.fromHoriz: lock
+*accessx*mul.fromVert: label
+*accessx*mul.fromHoriz: div
+*accessx*minus.fromVert: label
+*accessx*minus.fromHoriz: mul
+*accessx*7.fromVert: lock
+*accessx*8.fromVert: div
+*accessx*8.fromHoriz: 7
+*accessx*9.fromVert: mul
+*accessx*9.fromHoriz: 8
+*accessx*plus.fromVert: minus
+*accessx*plus.fromHoriz: 9
+*accessx*4.fromVert: 7
+*accessx*5.fromVert: 8
+*accessx*5.fromHoriz: 4
+*accessx*6.fromVert: 9
+*accessx*6.fromHoriz: 5
+*accessx*1.fromVert: 4
+*accessx*2.fromVert: 5
+*accessx*2.fromHoriz: 1
+*accessx*3.fromVert: 6
+*accessx*3.fromHoriz: 2
+*accessx*enter.fromVert: plus
+*accessx*enter.fromHoriz: 3
+*accessx*0.fromVert: 2
+*accessx*del.fromVert: 3
+*accessx*del.fromHoriz: 0
+*accessx.form.background: gray80
+*accessx*Label.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1
+*accessx*label.font: fixed
+*accessx*Label.font: -*-helvetica-bold-o-*-*-10-*-*-*-*-*-*-1
+*accessx*Label.width: 50
+*accessx*Label.height: 35
+*accessx*label.width: 212
+*accessx*label.height: 50
+*accessx*plus.height: 74
+*accessx*enter.height: 74
+*accessx*0.width: 104
+*accessx*lock.label: Num\nLock
+*accessx*div.label: /\n\
+*accessx*mul.label: *\n\
+*accessx*minus.label: -\n\
+*accessx*7.label: 7\n\
+*accessx*8.label: 8\n\
+*accessx*9.label: 9\n\
+*accessx*plus.label: +\n\ \n\ \n\ \n\
+*accessx*4.label: 4\n\
+*accessx*5.label: 5\n\
+*accessx*6.label: 6\n\
+*accessx*1.label: 1\n\
+*accessx*2.label: 2\n\
+*accessx*3.label: 3\n\
+*accessx*enter.label: Enter\n\ \n\ \n\ \n\
+*accessx*0.label: 0\n\
+*accessx*del.label: .\n\ \n\
+*accessx*label.displayList:\
+foreground white;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground gray20;\
+lines -1,0,0,0,0,-1
+*accessx*label.label:\
+If your mouse does not work, use\n\
+the numeric keypad, following\n\
+the diagram bellow.
+*accessx*div.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+font -*-helvetica-bold-o-*-*-10-*-*-*-*-*-*-1;\
+draw-string 4,30, "Button 1"
+*accessx*mul.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+font -*-helvetica-bold-o-*-*-10-*-*-*-*-*-*-1;\
+draw-string 4,30, "Button 2"
+*accessx*minus.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+font -*-helvetica-bold-o-*-*-10-*-*-*-*-*-*-1;\
+draw-string 4,30, "Button 3"
+*accessx*7.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+fill-poly 20,20,20,30,30,20
+*accessx*8.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+fill-poly 30,20,20,30,40,30
+*accessx*9.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+fill-poly 20,20,30,30,30,20
+*accessx*plus.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+font -*-helvetica-bold-o-*-*-10-*-*-*-*-*-*-1;\
+draw-string 9,46, "Double";\
+draw-string 14,60, "Click"
+*accessx*4.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+fill-poly 22,22,30,30,30,14
+*accessx*5.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+font -*-helvetica-bold-o-*-*-10*-*-*-*-*-*-1;\
+draw-string 14,30, "Click"
+*accessx*6.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+fill-poly 30,22,22,30,22,14
+*accessx*1.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+fill-poly 20,20,20,30,30,30
+*accessx*2.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+fill-poly 28,30,20,22,36,22
+*accessx*3.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+fill-poly 20,30,30,30,30,20
+*accessx*enter.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+font -*-helvetica-bold-o-*-*-10-*-*-*-*-*-*-1;\
+draw-string 9,46, "Toggle";\
+draw-string 10,60, "Speed"
+*accessx*0.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+font -*-helvetica-bold-o-*-*-10-*-*-*-*-*-*-1;\
+draw-string 26,30, "Button Lock"
+*accessx*del.displayList:\
+foreground gray20;\
+lines +1,-1,-1,-1,-1,+1;\
+foreground white;\
+lines -1,0,0,0,0,-1;\
+foreground red;\
+font -*-helvetica-bold-o-*-*-8-*-*-*-*-*-*-1;\
+draw-string 12,21, "Button";\
+draw-string 9,30, "Release"
+
+*panner.width: 100
+*panner.height: 100
+
+*help*text.properties:\
+default?family=Times&weight=Medium&slant=R&pixelsize=12&registry=ISO8859&encoding=1,\
+b?weight=Bold,\
+strong?weight=Bold,\
+i?slant=I,\
+em?slant=I,\
+address?slant=I,\
+h1?pixelsize=24&weight=Bold,\
+h2?pixelsize=20&weight=Bold,\
+h3?pixelsize=17&weight=Bold,\
+h4?pixelsize=14&weight=Bold,\
+h5?pixelsize=12&weight=Bold,\
+h6?pixelsize=10&weight=Bold,\
+pre?family=Courier&pixelsize=10,\
+kbd?family=Courier&pixelsize=10,\
+code?family=Courier&pixelsize=10,\
+samp?family=Courier&pixelsize=10,\
+tt?family=Courier&pixelsize=10
+*help*commands.min: 22
+*help*commands.max: 22
+*help*commands.showGrip:False
+*help*wrap: word
+*help*commands.close.label: Close
+.xf86cfg.help.geometry: 320x369
+.xf86cfg.help.minWidth: 320
+.xf86cfg.help.maxWidth: 320
+.xf86cfg.help.minHeight: 369
+.xf86cfg.help.maxHeight: 369
+.xf86cfg.help.translations: #override \
+<Message>WM_PROTOCOLS: help-close()
+*help*text.translations:\
+<Key>Up: scroll-one-line-down()\n\
+<Key>Down: scroll-one-line-up()\n\
+<Key>Next: next-page()\n\
+<Key>Prior: previous-page()\n\
+<Key>space: next-page()\n\
+<Key>BackSpace: previous-page()\n\
+<Key>Home: beginning-of-file()\n\
+<Key>End: end-of-file()
+*help*text*displayCaret: False
+*help*text.leftMargin: 10
+*help*text.rightMargin: 10
+
+*help.helpDevices:\
+<h2>Configuring devices</h2>\
+You can arrange the icons pressing the <i>left mouse button</i> \
+and dragging them.\
+<p>\
+To configure a device, press the <i>right mouse button</i> and choose the \
+<tt>configure</tt> option.\
+
+*help.helpScreen:\
+<h2>Configuring screens</h2>\
+You can drag the monitors to set the screen layout form <b>Xinerama</b> \
+pressing the <i>left mouse button</i> and moving them.\
+<p>\
+Press the <i>right mouse button</i> to set configure or set options for \
+the given screen.
+
+*help.helpModeline:\
+<h2>Configuring modelines</h2>\
+<b><font size=+1 color=red>The controls here may damage your \
+monitor.</font></b> \
+<p>\
+You can safelly skip this stage of the configuration process.\
+<p>\
+When not running in <b>Xinerama</b> mode, you can configure modelines \
+for every configured monitor. Set the <b>Auto</b> toggle to see the changes \
+while the <i>control buttons</i> are pressed.\
+<p>\
+Note that the <i>arrow</i> buttons are repeaters. Press they only once \
+and they will show the changes in the <i>text labels</i>.\
+<p>\
+<font color=forestgreen>Press <b>ESC</b> if the monitor goes out of sync.</font>
+
+*help.helpAccessX:\
+<h2>Configuring accessx</h2>\
+This interface is expected to allow customizing most of the <b>accessx</b> \
+options.\
+<p>\
+Press in the <b>Enable ???</b> label to set specific options.\
+<p>\
+<font color=red>Note</font>: currently, if you press the \
+<tt><b>Apply changes</b></tt> button there is no way to undo your changes.</font>
+
+
+*Expert.geometry: 640x460
+*Expert*vpane.min: 64
+*Expert*vpane.max: 64
+*Expert*vpane.showGrip: False
+*Expert*vpane.close.showGrip: False
+*Expert*vpane.close.min: 26
+*Expert*vpane.close.max: 26
+*panner.internalSpace: 1
+*panner.shadowThickness: 0
+*panner.shadowColor: gray60
+*panner.backgroundStipple: black
+*panner.borderColor: gray40
+
+*expert*tree.hSpace: 12
+*expert*tree*Box.hSpace: 4
+*expert*tree*vSpace: 4
+*expert*tree*LogFile.Text.width: 192
+*expert*tree*RgbPath.Text.width: 192
+*expert*tree*ModulePath.Text.width: 192
+
+*expert*tree*Form.defaultDistance: 4
+
+*expert*tree.backgroundPixmap: xlogo64?foreground=gray90&background=gray92
+*expert*tree.foreground: gray45
+
+*expert*tree*Label.backgroundPixmap: ParentRelative
+
+*expert*tree*Box.backgroundPixmap: gradient:vertical?dimension=3&start=gray85&end=gray95
+*expert*tree*Box.borderWidth: 0
+*expert*tree*Box.background: gray85
+*expert*Box.displayList:\
+foreground gray40;\
+lines 1,-1,-1,-1,-1,1;\
+foreground white;\
+lines -1,0,0,0,0,-1
+
+*expert*tree*Form.backgroundPixmap: gradient:vertical?dimension=3&start=gray85&end=gray95
+*expert*tree*Form.borderWidth: 0
+*expert*tree*Form.background: gray85
+*expert*Form.displayList:\
+foreground gray40;\
+lines 1,-1,-1,-1,-1,1;\
+foreground white;\
+lines -1,0,0,0,0,-1
+
+*expert*tree*Text.width: 160
+
+*expert*tree*fontpath.Text.width: 228
+*expert*tree*fontpath.up.fromHoriz: remove
+*expert*tree*fontpath.down.fromHoriz: up
+*expert*tree*fontpath.value.fromVert: remove
+*expert*tree*fontpath.valueNew.fromVert: new
+
+*expert*tree*modulepath.Text.width: 228
+*expert*tree*modulepath.value.fromVert: remove
+*expert*tree*modulepath.valueNew.fromVert: new
+
+*expert*tree*module.options.fromHoriz: remove
+*expert*tree*module.label.fromVert: remove
+*expert*tree*module.value.fromHoriz: new
+*expert*tree*module.value.width: 78
+
+*expert*tree*video*Label.justify: left
+*expert*tree*video.options.fromHoriz: remove
+*expert*tree*video.adaptor.fromHoriz: options
+*expert*tree*video.vendorL.width: 78
+*expert*tree*video.vendorL.label: VendorName
+*expert*tree*video.vendorL.fromVert: remove
+*expert*tree*video.vendor.fromVert: remove
+*expert*tree*video.vendor.fromHoriz: vendorL
+*expert*tree*video.boardL.width: 78
+*expert*tree*video.boardL.label: BoardName
+*expert*tree*video.boardL.fromVert: vendor
+*expert*tree*video.board.fromVert: vendor
+*expert*tree*video.board.fromHoriz: boardL
+*expert*tree*video.busidL.width: 78
+*expert*tree*video.busidL.label: BusID
+*expert*tree*video.busidL.fromVert: board
+*expert*tree*video.busid.fromVert: board
+*expert*tree*video.busid.fromHoriz: busidL
+*expert*tree*video.driverL.width: 78
+*expert*tree*video.driverL.label: Driver
+*expert*tree*video.driverL.fromVert: busid
+*expert*tree*video.driver.fromVert: busid
+*expert*tree*video.driver.fromHoriz: driverL
+*expert*tree*video.value.fromHoriz: new
+*expert*tree*video.value.width: 78
+*expert*tree*VideoPort.fromVert: driver
+*expert*tree*VideoPort.horizDistance: 120
+*expert*tree*video.value.width: 149
+
+*expert*tree*port.value.fromHoriz: new
+*expert*tree*port.options.fromHoriz: remove
+*expert*tree*port.label.fromVert: remove
+*expert*tree*port.value.width: 78
+
+*expert*tree*modes.mode.fromHoriz: remove
+*expert*tree*modes.value.fromHoriz: new
+*expert*tree*modes.value.width: 78
+
+*expert*tree*modeline.label.fromHoriz: remove
+*expert*tree*modeline.modeline.fromVert: remove
+*expert*tree*modeline.modeline.width: 480
+*expert*tree*modeline.value.fromHoriz: new
+*expert*tree*modeline.value.width: 120
+*expert*tree*modeline.modelineNew.fromVert: value
+*expert*tree*modeline.modelineNew.width: 480
+
+*expert*tree*monitor.options.fromHoriz: remove
+*expert*tree*monitor.label.fromHoriz: options
+
+*expert*tree*monitor.Label.justify: left
+*expert*tree*monitor.Text.width: 120
+*expert*tree*monitor.vendorL.width: 100
+*expert*tree*monitor.vendorL.label: VendorName
+*expert*tree*monitor.vendorL.fromVert: remove
+*expert*tree*monitor.vendor.fromVert: remove
+*expert*tree*monitor.vendor.fromHoriz: vendorL
+*expert*tree*monitor.modelnameL.width: 100
+*expert*tree*monitor.modelnameL.label: ModelName
+*expert*tree*monitor.modelnameL.fromVert: vendor
+*expert*tree*monitor.modelname.fromVert: vendor
+*expert*tree*monitor.modelname.fromHoriz: modelnameL
+*expert*tree*monitor.widthL.width: 100
+*expert*tree*monitor.widthL.label: Width (mm)
+*expert*tree*monitor.widthL.fromVert: modelname
+*expert*tree*monitor.width.fromVert: modelname
+*expert*tree*monitor.width.fromHoriz: widthL
+*expert*tree*monitor.heightL.width: 100
+*expert*tree*monitor.heightL.label: Height (mm)
+*expert*tree*monitor.heightL.fromVert: width
+*expert*tree*monitor.height.fromVert: width
+*expert*tree*monitor.height.fromHoriz: heightL
+*expert*tree*monitor.hsyncL.width: 100
+*expert*tree*monitor.hsyncL.label: Hsync
+*expert*tree*monitor.hsyncL.fromVert: heightL
+*expert*tree*monitor.hsync.fromVert: height
+*expert*tree*monitor.hsync.fromHoriz: hsyncL
+*expert*tree*monitor.vrefreshL.width: 100
+*expert*tree*monitor.vrefreshL.label: Vrefresh
+*expert*tree*monitor.vrefreshL.fromVert: hsync
+*expert*tree*monitor.vrefresh.fromVert: hsync
+*expert*tree*monitor.vrefresh.fromHoriz: vrefreshL
+*expert*tree*monitor.gammaRedL.width: 100
+*expert*tree*monitor.gammaRedL.label: Gamma (red)
+*expert*tree*monitor.gammaRedL.fromVert: vrefresh
+*expert*tree*monitor.gammaRed.fromVert: vrefresh
+*expert*tree*monitor.gammaRed.fromHoriz: gammaRedL
+*expert*tree*monitor.gammaGreenL.width: 100
+*expert*tree*monitor.gammaGreenL.label: Gamma (green)
+*expert*tree*monitor.gammaGreenL.fromVert: gammaRed
+*expert*tree*monitor.gammaGreen.fromVert: gammaRed
+*expert*tree*monitor.gammaGreen.fromHoriz: gammaGreenL
+*expert*tree*monitor.gammaBlueL.width: 100
+*expert*tree*monitor.gammaBlueL.label: Gamma (blue)
+*expert*tree*monitor.gammaBlueL.fromVert: gammaGreen
+*expert*tree*monitor.gammaBlue.fromVert: gammaGreen
+*expert*tree*monitor.gammaBlue.fromHoriz: gammaBlueL
+*expert*tree*monitor.value.width: 191
+*expert*tree*monitor.value.fromHoriz: new
+
+*expert*tree*device.Label.justify: left
+*expert*tree*device.options.fromHoriz: remove
+*expert*tree*device.label.fromHoriz: options
+*expert*tree*device.vendorL.label: VendorName
+*expert*tree*device.vendorL.width: 100
+*expert*tree*device.vendorL.fromVert: remove
+*expert*tree*device.vendor.fromVert: remove
+*expert*tree*device.vendor.fromHoriz: vendorL
+*expert*tree*device.boardL.label: BoardName
+*expert*tree*device.boardL.width: 100
+*expert*tree*device.boardL.fromVert: vendor
+*expert*tree*device.board.fromVert: vendor
+*expert*tree*device.board.fromHoriz: boardL
+*expert*tree*device.chipsetL.label: Chipset
+*expert*tree*device.chipsetL.width: 100
+*expert*tree*device.chipsetL.fromVert: board
+*expert*tree*device.chipset.fromVert: board
+*expert*tree*device.chipset.fromHoriz: chipsetL
+*expert*tree*device.busidL.label: BusID
+*expert*tree*device.busidL.width: 100
+*expert*tree*device.busidL.fromVert: chipset
+*expert*tree*device.busid.fromVert: chipset
+*expert*tree*device.busid.fromHoriz: chipsetL
+*expert*tree*device.cardL.label: Card
+*expert*tree*device.cardL.width: 100
+*expert*tree*device.cardL.fromVert: busid
+*expert*tree*device.card.fromVert: busid
+*expert*tree*device.card.fromHoriz: cardL
+*expert*tree*device.driverL.label: Driver
+*expert*tree*device.driverL.width: 100
+*expert*tree*device.driverL.fromVert: card
+*expert*tree*device.driver.fromVert: card
+*expert*tree*device.driver.fromHoriz: driverL
+*expert*tree*device.ramdacL.label: Ramdac
+*expert*tree*device.ramdacL.width: 100
+*expert*tree*device.ramdacL.fromVert: driverL
+*expert*tree*device.ramdac.fromVert: driver
+*expert*tree*device.ramdac.fromHoriz: ramdacL
+*expert*tree*device.dacSpeedL.label: DacSpeed
+*expert*tree*device.dacSpeedL.width: 100
+*expert*tree*device.dacSpeedL.fromVert: ramdac
+*expert*tree*device.dacSpeed.fromVert: ramdac
+*expert*tree*device.dacSpeed.fromHoriz: dacSpeedL
+*expert*tree*device.videoRamL.label: VideoRam
+*expert*tree*device.videoRamL.width: 100
+*expert*tree*device.videoRamL.fromVert: dacSpeed
+*expert*tree*device.videoRam.fromVert: dacSpeed
+*expert*tree*device.videoRam.fromHoriz: videoRamL
+*expert*tree*device.textClockFreqL.label: TextClockFreq
+*expert*tree*device.textClockFreqL.width: 100
+*expert*tree*device.textClockFreqL.fromVert: videoRam
+*expert*tree*device.textClockFreq.fromVert: videoRam
+*expert*tree*device.textClockFreq.fromHoriz: textClockFreqL
+*expert*tree*device.biosBaseL.label: BiosBase
+*expert*tree*device.biosBaseL.width: 100
+*expert*tree*device.biosBaseL.fromVert: textClockFreq
+*expert*tree*device.biosBase.fromVert: textClockFreq
+*expert*tree*device.biosBase.fromHoriz: biosBaseL
+*expert*tree*device.memBaseL.label: MemBase
+*expert*tree*device.memBaseL.width: 100
+*expert*tree*device.memBaseL.fromVert: biosBase
+*expert*tree*device.memBase.fromVert: biosBase
+*expert*tree*device.memBase.fromHoriz: memBaseL
+*expert*tree*device.ioBaseL.label: IOBase
+*expert*tree*device.ioBaseL.width: 100
+*expert*tree*device.ioBaseL.fromVert: memBase
+*expert*tree*device.ioBase.fromVert: memBase
+*expert*tree*device.ioBase.fromHoriz: ioBaseL
+*expert*tree*device.clockChipL.label: ClockChip
+*expert*tree*device.clockChipL.width: 100
+*expert*tree*device.clockChipL.fromVert: ioBase
+*expert*tree*device.clockChip.fromVert: ioBase
+*expert*tree*device.clockChip.fromHoriz: clockChipL
+*expert*tree*device.devClockL.label: Clocks
+*expert*tree*device.devClockL.width: 100
+*expert*tree*device.devClockL.fromVert: clockChip
+*expert*tree*device.devClock.fromVert: clockChip
+*expert*tree*device.devClock.fromHoriz: devClockL
+*expert*tree*device.chipIdL.label: ChipId
+*expert*tree*device.chipIdL.width: 100
+*expert*tree*device.chipIdL.fromVert: devClock
+*expert*tree*device.chipId.fromVert: devClock
+*expert*tree*device.chipId.fromHoriz: chipIdL
+*expert*tree*device.chipRevL.label: ChipRev
+*expert*tree*device.chipRevL.width: 100
+*expert*tree*device.chipRevL.fromVert: chipId
+*expert*tree*device.chipRev.fromVert: chipId
+*expert*tree*device.chipRev.fromHoriz: chipRevL
+*expert*tree*device.irqL.label: IRQ
+*expert*tree*device.irqL.width: 100
+*expert*tree*device.irqL.fromVert: chipRev
+*expert*tree*device.irq.fromVert: chipRev
+*expert*tree*device.irq.fromHoriz: irqL
+*expert*tree*device.screenL.label: Screen
+*expert*tree*device.screenL.width: 100
+*expert*tree*device.screenL.fromVert: irq
+*expert*tree*device.screen.fromVert: irq
+*expert*tree*device.screen.fromHoriz: screenL
+*expert*tree*device.value.fromHoriz: new
+
+*expert*tree*screen.Label.justify: left
+*expert*tree*screen.options.fromHoriz: remove
+*expert*tree*screen.label.fromHoriz: options
+*expert*tree*screen.defaultDepthL.label: DefaultDepth
+*expert*tree*screen.defaultDepthL.width: 92
+*expert*tree*screen.defaultDepthL.fromVert: remove
+*expert*tree*screen.defaultDepth.fromVert: remove
+*expert*tree*screen.defaultDepth.fromHoriz: defaultDepthL
+*expert*tree*screen.defaultBppL.label: DefaultBpp
+*expert*tree*screen.defaultBppL.width: 92
+*expert*tree*screen.defaultBppL.fromVert: defaultDepth
+*expert*tree*screen.defaultBpp.fromVert: defaultDepth
+*expert*tree*screen.defaultBpp.fromHoriz: defaultBppL
+*expert*tree*screen.defaultFbBppL.label: DefaultFbBpp
+*expert*tree*screen.defaultFbBppL.width: 92
+*expert*tree*screen.defaultFbBppL.fromVert: defaultBpp
+*expert*tree*screen.defaultFbBpp.fromVert: defaultBpp
+*expert*tree*screen.defaultFbBpp.fromHoriz: defaultFbBppL
+*expert*tree*screen.monitorL.label: Monitor
+*expert*tree*screen.monitorL.width: 92
+*expert*tree*screen.monitorL.fromVert: defaultFbBpp
+*expert*tree*screen.monitor.fromVert: defaultFbBpp
+*expert*tree*screen.monitor.fromHoriz: monitorL
+*expert*tree*screen.deviceL.label: Device
+*expert*tree*screen.deviceL.width: 92
+*expert*tree*screen.deviceL.fromVert: monitor
+*expert*tree*screen.device.fromVert: monitor
+*expert*tree*screen.device.fromHoriz: deviceL
+*expert*tree*screen.value.fromHoriz: new
+
+*expert*tree*adaptor.label.fromHoriz: remove
+
+*expert*tree*display.Label.width: 64
+*expert*tree*display.Label.justify: left
+*expert*tree*display.options.fromHoriz: remove
+*expert*tree*display.viewportL.label: Viewport
+*expert*tree*display.viewportL.fromVert: remove
+*expert*tree*display.viewport.fromVert: remove
+*expert*tree*display.viewport.fromHoriz: viewportL
+*expert*tree*display.virtualL.label: Virtual
+*expert*tree*display.virtualL.fromVert: viewport
+*expert*tree*display.virtual.fromVert: viewport
+*expert*tree*display.virtual.fromHoriz: virtualL
+*expert*tree*display.depthL.label: Depth
+*expert*tree*display.depthL.fromVert: virtual
+*expert*tree*display.depth.fromVert: virtual
+*expert*tree*display.depth.fromHoriz: depthL
+*expert*tree*display.bppL.label: FbBPP
+*expert*tree*display.bppL.fromVert: depth
+*expert*tree*display.bpp.fromVert: depth
+*expert*tree*display.bpp.fromHoriz: bppL
+*expert*tree*display.visualL.label: Visual
+*expert*tree*display.visualL.fromVert: bpp
+*expert*tree*display.visual.fromVert: bpp
+*expert*tree*display.visual.fromHoriz: visualL
+*expert*tree*display.weightL.label: Weight
+*expert*tree*display.weightL.fromVert: visual
+*expert*tree*display.weight.fromVert: visual
+*expert*tree*display.weight.fromHoriz: weightL
+*expert*tree*display.blackL.label: Black
+*expert*tree*display.blackL.fromVert: weight
+*expert*tree*display.black.fromVert: weight
+*expert*tree*display.black.fromHoriz: blackL
+*expert*tree*display.whiteL.label: White
+*expert*tree*display.whiteL.fromVert: black
+*expert*tree*display.white.fromVert: black
+*expert*tree*display.white.fromHoriz: whiteL
+
+*expert*tree*mode.label.fromHoriz: remove
+*expert*tree*mode.value.fromHoriz: new
+*expert*tree*mode.value.width: 100
+
+*expert*tree*input.options.fromHoriz: remove
+*expert*tree*input.label.fromHoriz: options
+*expert*tree*input.driverL.label: Driver
+*expert*tree*input.driverL.fromVert: remove
+*expert*tree*input.driver.fromVert: remove
+*expert*tree*input.driver.fromHoriz: driverL
+*expert*tree*input.value.fromHoriz: new
+
+*expert*tree*layout.options.fromHoriz: remove
+*expert*tree*layout.label.fromHoriz: options
+*expert*tree*layout.value.fromHoriz: new
+
+*expert*tree*adjacency.Text.width: 46
+*expert*tree*adjacency.MenuButton.width: 122
+*expert*tree*adjacency.label.fromHoriz: remove
+*expert*tree*adjacency.scrnumL.label: Screen number
+*expert*tree*adjacency.scrnumL.horizDistance: 50
+*expert*tree*adjacency.scrnum.width: 32
+*expert*tree*adjacency.scrnumL.fromVert: remove
+*expert*tree*adjacency.scrnum.fromVert: remove
+*expert*tree*adjacency.scrnum.fromHoriz: scrnumL
+*expert*tree*adjacency.above.label: Above
+*expert*tree*adjacency.above.fromVert: scrnumL
+*expert*tree*adjacency.above.vertDistance: 20
+*expert*tree*adjacency.above.horizDistance: 96
+*expert*tree*adjacency.below.label: Below
+*expert*tree*adjacency.below.horizDistance: 96
+*expert*tree*adjacency.leftOf.label: LeftOf
+*expert*tree*adjacency.leftOf.fromVert: above
+*expert*tree*adjacency.screen.fromVert: above
+*expert*tree*adjacency.screen.fromHoriz: leftOf
+*expert*tree*adjacency.rightOf.label: RightOf
+*expert*tree*adjacency.rightOf.fromVert: above
+*expert*tree*adjacency.rightOf.fromHoriz: screen
+*expert*tree*adjacency.below.fromVert: screen
+*expert*tree*adjacency.relative.label: Relative
+*expert*tree*adjacency.relative.horizDistance: 53
+*expert*tree*adjacency.relative.fromVert: below
+*expert*tree*adjacency.absolute.fromVert: below
+*expert*tree*adjacency*absolute.label: Absolute
+*expert*tree*adjacency*absolute.fromHoriz: relative
+*expert*tree*adjacency*adjxL.label: X
+*expert*tree*adjacency*adjxL.horizDistance: 42
+*expert*tree*adjacency*adjxL.fromVert: absolute
+*expert*tree*adjacency*adjx.fromVert: absolute
+*expert*tree*adjacency*adjx.fromHoriz: adjxL
+*expert*tree*adjacency*adjyL.label: Y
+*expert*tree*adjacency*adjyL.horizDistance: 12
+*expert*tree*adjacency*adjyL.fromVert: absolute
+*expert*tree*adjacency*adjyL.fromHoriz: adjx
+*expert*tree*adjacency*adjy.fromVert: absolute
+*expert*tree*adjacency*adjy.fromHoriz: adjyL
+
+*expert*tree*inputref.options.fromHoriz: remove
+*expert*tree*inputref.label.fromHoriz: options
+
+*expert*tree*vendor.Text.width: 100
+*expert*tree*vendor.options.fromHoriz: remove
+*expert*tree*vendor.label.fromHoriz: options
+*expert*tree*vendor.value.fromHoriz: new
+
+*expert*tree*vendorSub.Text.width: 140
+*expert*tree*vendorSub.options.fromHoriz: remove
+*expert*tree*vendorSub.label.fromHoriz: options
+*expert*tree*vendorSub.nameL.label: Name
+*expert*tree*vendorSub.nameL.fromVert: remove
+*expert*tree*vendorSub.name.fromVert: remove
+*expert*tree*vendorSub.name.fromHoriz: nameL
+*expert*tree*vendorSub.value.fromHoriz: new
+
+*expert*tree*dri.Text.width: 100
+*expert*tree*dri.Label.width: 78
+*expert*tree*dri.Label.justify: left
+*expert*tree*dri.nameL.label: Group name
+*expert*tree*dri.name.fromHoriz: nameL
+*expert*tree*dri.groupL.label: Group
+*expert*tree*dri.groupL.fromVert: name
+*expert*tree*dri.group.fromVert: name
+*expert*tree*dri.group.fromHoriz: groupL
+*expert*tree*dri.modeL.label: Mode
+*expert*tree*dri.modeL.fromVert: group
+*expert*tree*dri.mode.fromVert: group
+*expert*tree*dri.mode.fromHoriz: modeL
+
+*expert*tree*buffers.Label.width: 50
+*expert*tree*buffers.Text.width: 100
+*expert*tree*buffers.countL.label: Count
+*expert*tree*buffers.countL.fromVert: remove
+*expert*tree*buffers.count.fromVert: remove
+*expert*tree*buffers.count.fromHoriz: countL
+*expert*tree*buffers.sizeL.label: Size
+*expert*tree*buffers.sizeL.fromVert: count
+*expert*tree*buffers.size.fromVert: count
+*expert*tree*buffers.size.fromHoriz: sizeL
+*expert*tree*buffers.flagsL.label: Flags
+*expert*tree*buffers.flagsL.fromVert: size
+*expert*tree*buffers.flags.fromVert: size
+*expert*tree*buffers.flags.fromHoriz: flagsL
+*Expert*close.label: Close
diff --git a/hw/xfree86/utils/xorgcfg/expert.c b/hw/xfree86/utils/xorgcfg/expert.c
index bd0182585..3bb3a34cc 100644
--- a/hw/xfree86/utils/xorgcfg/expert.c
+++ b/hw/xfree86/utils/xorgcfg/expert.c
@@ -4742,7 +4742,7 @@ ExpertInitialize(void)
XtAddCallback(panner, XtNreportCallback, PannerCallback, NULL);
tree = XtCreateManagedWidget("tree", treeWidgetClass, expert, NULL, 0);
- config = XtVaCreateManagedWidget("XF86Config", toggleWidgetClass, tree,
+ config = XtVaCreateManagedWidget(__XCONFIGFILE__, toggleWidgetClass, tree,
XtNstate, True, NULL, 0);
mainNode = NewNode(NULL, config, config, NULL, NULL);
diff --git a/hw/xfree86/utils/xorgcfg/interface.c b/hw/xfree86/utils/xorgcfg/interface.c
index 053b82257..2595fd376 100644
--- a/hw/xfree86/utils/xorgcfg/interface.c
+++ b/hw/xfree86/utils/xorgcfg/interface.c
@@ -193,8 +193,8 @@ static char *device_names[] = {
static XtResource appResources[] = {
#if 0
- {"xf86config", "XF86Config", XtRString, sizeof(char*),
- 0, XtRString, "/etc/X11/XF86Config"},
+ {"config", __XCONFIGFILE__, XtRString, sizeof(char*),
+ 0, XtRString, "/etc/X11/"__XCONFIGFILE__},
#endif
{"menuBitmap", "MenuBitmap", XtRString, sizeof(char*),
0, XtRString, "menu10"},
@@ -205,11 +205,11 @@ Usage(void)
{
fprintf(stderr,
"Usage:\n"
-" xf86cfg [-option ...]\n"
+" xorgcfg [-option ...]\n"
"\n"
"Options:\n"
-" -xf86config <XF86Config> Alternate configuration file.\n"
-" -modulepath <module-path> XFree86 modules location.\n"
+" -config <"__XCONFIGFILE__"> Alternate configuration file.\n"
+" -modulepath <module-path> "__XSERVERNAME__" modules location.\n"
" -serverpath <server-path> X server to start (if $DISPLAY is not defined).\n"
" -fontpath <font-path> Font path for fonts.\n"
" -rgbpath <rgb-path> Where the rgb.txt file is located.\n"
@@ -217,7 +217,7 @@ Usage(void)
" -textmode Use this option for the text only interface.\n"
#endif
#ifdef USE_MODULES
-" -nomodules Use this option if xf86cfg is slow to start.\n"
+" -nomodules Use this option if xorgcfg is slow to start.\n"
" -verbose <number> Verbosity used in the loader (default 1).\n"
#endif
" -verify Verify modules/options integrity.\n"
@@ -253,7 +253,9 @@ main(int argc, char *argv[])
noverify = True;
for (i = 1; i < argc; i++) {
- if (strcmp(argv[i], "-xf86config") == 0) {
+ if (strcmp(argv[i], "-config") == 0 ||
+ strcmp(argv[i], "-xorgconfig") == 0 ||
+ strcmp(argv[i], "-xf86config") == 0) {
if (i + 1 < argc) {
XF86Config_path = argv[++i];
config_set = True;
@@ -298,13 +300,13 @@ main(int argc, char *argv[])
startedx = startx();
if (XF86Config_path == NULL)
- XF86Config_path = XtNewString("XF86Config-4");
+ XF86Config_path = XtNewString(__XCONFIGFILE__"-4");
if (XkbConfig_path == NULL) {
XmuSnprintf(XkbConfig_path_static, sizeof(XkbConfig_path_static),
"%s/%s%s", XFree86Dir, XkbConfigDir, XkbConfigFile);
XkbConfig_path = XkbConfig_path_static;
}
- toplevel = XtAppInitialize(&appcon, "XF86Cfg",
+ toplevel = XtAppInitialize(&appcon, "XOrgCfg",
NULL, 0,
&argc, argv,
NULL, NULL, 0);
@@ -534,9 +536,9 @@ main(int argc, char *argv[])
# endif
#else
# ifdef XF86CONFIGDIR
- XF86Config_path = XtNewString(XF86CONFIGDIR "/XF86Config-4");
+ XF86Config_path = XtNewString(XF86CONFIGDIR "/"__XCONFIGFILE__"-4");
# else
- XF86Config_path = XtNewString("/etc/X11/XF86Config-4");
+ XF86Config_path = XtNewString("/etc/X11/"__XCONFIGFILE__"-4");
# endif
#endif
}
diff --git a/hw/xfree86/utils/xorgcfg/keyboard-cfg.c b/hw/xfree86/utils/xorgcfg/keyboard-cfg.c
index 3482653b8..997fce5bd 100644
--- a/hw/xfree86/utils/xorgcfg/keyboard-cfg.c
+++ b/hw/xfree86/utils/xorgcfg/keyboard-cfg.c
@@ -73,7 +73,7 @@ static char *XkbRulesDir = "lib/X11/xkb/rules/";
#ifdef XFREE98_XKB
static char *XkbRulesFile = "xfree98";
#else
-static char *XkbRulesFile = "xfree86";
+static char *XkbRulesFile = __XKBDEFRULES__;
#endif
static XF86ConfInputPtr current_input;
diff --git a/hw/xfree86/utils/xorgcfg/loader.c b/hw/xfree86/utils/xorgcfg/loader.c
index 84032f596..138b77778 100644
--- a/hw/xfree86/utils/xorgcfg/loader.c
+++ b/hw/xfree86/utils/xorgcfg/loader.c
@@ -26,7 +26,7 @@
*
* Author: Paulo César Pereira de Andrade <pcpa@conectiva.com.br>
*
- * $XdotOrg: xc/programs/Xserver/hw/xfree86/xf86cfg/loader.c,v 1.1.4.1.4.1 2004/03/04 17:48:16 eich Exp $
+ * $XdotOrg: xc/programs/Xserver/hw/xfree86/xf86cfg/loader.c,v 1.1.4.1.4.2.4.1 2004/03/23 13:54:01 eich Exp $
* $XFree86: xc/programs/Xserver/hw/xfree86/xf86cfg/loader.c,v 1.19 2002/06/06 21:03:32 paulo Exp $
*/
@@ -188,8 +188,7 @@ LoaderInitializeOptions(void)
first = 0;
checkerLegend[CHECKER_OPTIONS_FILE_MISSING] =
- "The Options file, normally /usr/X11R6/lib/X11/Options was not found.\n"
- "In the sources, it is at xc/programs/Xserver/hw/xfree86/Options.";
+ "The Options file, normally /usr/X11R6/lib/X11/Options was not found.\n";
checkerLegend[CHECKER_OPTION_DESCRIPTION_MISSING] =
"No description for the module option. The description should be in\n"
"in the Options file, and using the sintax:\n"
@@ -207,7 +206,7 @@ LoaderInitializeOptions(void)
checkerLegend[CHECKER_NO_OPTIONS_AVAILABLE] =
"The driver does not have an AvailableOptions function, or that\n"
"function is returning NULL. If the driver is returning NULL, and\n"
- "really does not need any options from XF86Config, than the message\n"
+ "really does not need any options from "__XCONFIGFILE__", than the message\n"
"can be ignored.";
checkerLegend[CHECKER_NO_VENDOR_CHIPSET] =
"The checker could not fetch the PCI chipset/vendor information from\n"
diff --git a/hw/xfree86/utils/xorgcfg/startx.c b/hw/xfree86/utils/xorgcfg/startx.c
index 038f21d38..9b70b70fd 100644
--- a/hw/xfree86/utils/xorgcfg/startx.c
+++ b/hw/xfree86/utils/xorgcfg/startx.c
@@ -64,10 +64,10 @@ startx(void)
*/
if (XFree86_path)
c_pos = XmuSnprintf(commandline, sizeof(commandline),
- "%s/XFree86 :8 -configure ",XFree86_path);
+ "%s/"__XSERVERNAME__" :8 -configure ",XFree86_path);
else
c_pos = XmuSnprintf(commandline, sizeof(commandline),
- "%s/bin/XFree86 :8 -configure ", XFree86Dir);
+ "%s/bin/"__XSERVERNAME__" :8 -configure ", XFree86Dir);
if (XF86Module_path && ((len = sizeof(commandline) - c_pos) > 0))
c_pos += XmuSnprintf(commandline + c_pos,len,
" -modulepath %s",XF86Module_path);
@@ -87,9 +87,9 @@ startx(void)
home = "/";
#ifndef QNX4
- XmuSnprintf(filename, sizeof(filename), "%s/XF86Config.new", home);
+ XmuSnprintf(filename, sizeof(filename), "%s/"__XCONFIGFILE__".new", home);
#else
- XmuSnprintf(filename, sizeof(filename), "//%d%s/XF86Config.new",
+ XmuSnprintf(filename, sizeof(filename), "//%d%s/"__XCONFIGFILE__".new",
getnid(), home);
#endif
@@ -106,9 +106,9 @@ startx(void)
char path[PATH_MAX];
/* Don't change to X! see above */
if (XFree86_path)
- XmuSnprintf(path, sizeof(path), "%s/XFree86", XFree86_path);
+ XmuSnprintf(path, sizeof(path), "%s/"__XSERVERNAME__, XFree86_path);
else
- XmuSnprintf(path, sizeof(path), "%s/bin/XFree86", XFree86Dir);
+ XmuSnprintf(path, sizeof(path), "%s/bin/"__XSERVERNAME__, XFree86Dir);
execl(path, "X", ":8", /*"+xinerama",*/ "+accessx","-allowMouseOpenFail",
"-xf86config", XF86Config_path, (void *)NULL);
exit(-127);
diff --git a/hw/xfree86/utils/xorgcfg/text-mode.c b/hw/xfree86/utils/xorgcfg/text-mode.c
index 3a257d047..73d9a2248 100644
--- a/hw/xfree86/utils/xorgcfg/text-mode.c
+++ b/hw/xfree86/utils/xorgcfg/text-mode.c
@@ -124,7 +124,7 @@ static char *main_menu[] = {
#define CONF_LAYOUT 5
"Configure layout",
#define CONF_FINISH 6
- "Write XF86Config and quit",
+ "Write "__XCONFIGFILE__" and quit",
#define CONF_QUIT 7
"Quit",
};
@@ -200,23 +200,23 @@ TextMode(void)
ClearScreen();
refresh();
- if (Dialog("XFree86 Configuration",
- "This program will create the XF86Config file, based on "
+ if (Dialog( __XSERVERNAME__"Configuration",
+ "This program will create the "__XCONFIGFILE__" file, based on "
"menu selections you make.\n"
"\n"
#ifndef __UNIXOS2__
- "The XF86Config file usually resides in /usr/X11R6/etc/X11 "
+ "The "__XCONFIGFILE__" file usually resides in /usr/X11R6/etc/X11 "
#else
- "The XF86Config file usually resides in "XF86CONFIGDIR" "
+ "The "__XCONFIGFILE__" file usually resides in "XF86CONFIGDIR" "
#endif
- "or /etc/X11. A sample XF86Config file is supplied with "
- "XFree86; it is configured for a standard VGA card and "
+ "or /etc/X11. A sample "__XCONFIGFILE__" file is supplied with "
+ __XSERVERNAME__"; it is configured for a standard VGA card and "
"monitor with 640x480 resolution. This program will ask for "
"a pathname when it is ready to write the file.\n"
"\n"
- "You can either take the sample XF86Config as a base and "
+ "You can either take the sample "__XCONFIGFILE__" as a base and "
"edit it for your configuration, or let this program "
- "produce a base XF86Config file for your configuration and "
+ "produce a base "__XCONFIGFILE__" file for your configuration and "
"fine-tune it.",
20, 60, " Ok ", " Cancel ", 0) != 0)
break;
@@ -295,12 +295,12 @@ WriteXF86Config(void)
ClearScreen();
refresh();
- xf86config = DialogInput("Write XF86Config", "Write configuration to file:",
+ xf86config = DialogInput("Write "__XCONFIGFILE__, "Write configuration to file:",
10, 60, XF86Config_path ? XF86Config_path :
#ifndef __UNIXOS2__
- "/etc/X11/XF86Config", " Ok ", " Cancel ", 0);
+ "/etc/X11/"__XCONFIGFILE__, " Ok ", " Cancel ", 0);
#else
- XF86CONFIGDIR"/XF86Config", " Ok ", " Cancel ", 0);
+ XF86CONFIGDIR"/"__XCONFIGFILE__, " Ok ", " Cancel ", 0);
#endif
if (xf86config == NULL)
@@ -711,7 +711,7 @@ KeyboardConfig(void)
#ifdef XFREE98_XKB
rulesfile = XKB_RULES_DIR "/xfree98";
#else
- rulesfile = XKB_RULES_DIR "/xfree86";
+ rulesfile = XKB_RULES_DIR "/"__XKBDEFRULES__;
#endif
rules = XkbRF_Load(rulesfile, "", True, False);
if (rules == NULL) {
diff --git a/hw/xfree86/utils/xorgcfg/xf86config.c b/hw/xfree86/utils/xorgcfg/xf86config.c
index e36915888..6d93afe34 100644
--- a/hw/xfree86/utils/xorgcfg/xf86config.c
+++ b/hw/xfree86/utils/xorgcfg/xf86config.c
@@ -24,7 +24,7 @@
* dealings in this Software without prior written authorization from
* Conectiva Linux.
*
- * Author: Paulo César Pereira de Andrade <pcpa@conectiva.com.br>
+ * Author: Paulo César Pereira de Andrade <pcpa@conectiva.com.br>
*
* $XFree86: xc/programs/Xserver/hw/xfree86/xf86cfg/xf86config.c,v 1.5tsi Exp $
*/
diff --git a/hw/xfree86/utils/xorgcfg/xorgcfg.man.pre b/hw/xfree86/utils/xorgcfg/xorgcfg.man.pre
new file mode 100644
index 000000000..bade75d42
--- /dev/null
+++ b/hw/xfree86/utils/xorgcfg/xorgcfg.man.pre
@@ -0,0 +1,152 @@
+.\"
+.\" Copyright (c) 2000 by Conectiva S.A. (http://www.conectiva.com)
+.\"
+.\" Permission is hereby granted, free of charge, to any person obtaining a
+.\" copy of this software and associated documentation files (the "Software"),
+.\" to deal in the Software without restriction, including without limitation
+.\" the rights to use, copy, modify, merge, publish, distribute, sublicense,
+.\" and/or sell copies of the Software, and to permit persons to whom the
+.\" Software is furnished to do so, subject to the following conditions:
+.\"
+.\" The above copyright notice and this permission notice shall be included in
+.\" all copies or substantial portions of the Software.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+.\" CONECTIVA LINUX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+.\" WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+.\" OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+.\" SOFTWARE.
+.\"
+.\" Except as contained in this notice, the name of Conectiva Linux shall
+.\" not be used in advertising or otherwise to promote the sale, use or other
+.\" dealings in this Software without prior written authorization from
+.\" Conectiva Linux.
+.\"
+.\" Author: Paulo César Pereira de Andrade <pcpa@conectiva.com.br>
+.\"
+.\" $XFree86: xc/programs/Xserver/hw/xfree86/xf86cfg/xf86cfg.man,v 1.9 2002/12/30 14:34:02 herrb Exp $
+.\"
+.TH xorgcfg __appmansuffix__ __vendorversion__
+.SH NAME
+xorgcfg - Graphical configuration tool for __xservername__
+.SH SYNOPSIS
+.B xorgcfg
+[-config\fI __xconfigfile__\fP] [-modulepath \fImoduledir\fP]
+[-fontpath \fIfontsdir\fP] [-toolkitoption ...]
+.SH DESCRIPTION
+.I Xorgcfg
+is a tool to configure\fI __xservername__\fP, and can be used to either write the
+initial configuration file or make customizations to the current configuration.
+.PP
+When the \fBDISPLAY\fP environment variable is not set, xorgcfg will run
+the command\fI __xservername__ -configure\fP to allow the xserver detect the
+hardware in the computer, and write an initial\fI __xconfigfile__\fP file
+in the user's home directory. Then, it will start
+__xservername__ and allow customizations.
+.br
+If the \fBDISPLAY\fP environment variable is set, xorgcfg will read the
+default\fI __xconfigfile__\fP, that may not be the same being used by the current
+server, and allow customizations.
+.PP
+To use an alternative location for modules or fonts the respective search
+paths may be specified.
+.PP
+Unless there is an \fBApply\fP button in the current xorgcfg dialog, the
+changes made will take place the next time\fI __xservername__\fP is started.
+
+.PP
+Xorgcfg allows addition and configuration of new devices, such as video cards,
+monitors, keyboards and mouses.
+.PP
+Screen layout configuration for xinerama or traditional multi-head is also
+available.
+.PP
+Modelines can be configured or optimized.
+.PP
+AccessX basic configurations can be made in the xorgcfg's accessx section.
+
+.SH OPTIONS
+.TP 8
+.I -config
+Specifies an alternate __xconfigfile__ file for configuration.
+.TP 8
+.I -modulepath
+Specifies where xorgcfg, and the server it may start, should look for
+__xservername__ modules.
+.TP 8
+.I -serverpath
+Specifies the complete path, not including the binary name, of the
+__xservername__ binary.
+.TP 8
+.I -fontpath
+Specifies the path to the fonts that should be used by the server started
+by xorgcfg.
+.TP 8
+.I -rgbpath
+Specifies the path to the rgb.txt file that should be used by the server
+started by xorgcfg, if any.
+.TP 8
+.I -textmode
+If xorgcfg was compiled with support to ncurses, this option makes xorgcfg
+enters a text mode interface.
+.TP 8
+.I -nomodules
+When built with support for loading modules, this options changes xorgcfg
+behaviour, so that it will not load any modules, and thus start quicker.
+
+.SH ENVIRONMENT
+.TP 8
+.I DISPLAY
+Default host and display number
+.TP 8
+.I XWINHOME
+Directory where __xservername__ was installed, defaults to /usr/X11R6.
+.TP 8
+.I XENVIRONMENT
+Name of a resource file that overrides the global resources
+stored in the RESOURCE_MANAGER property
+
+.SH FILES
+.TP 8
+.I /etc/__xconfigfile__
+Server configuration file
+.TP 8
+.I /etc/X11/__xconfigfile__
+Server configuration file
+.TP 8
+.I /usr/X11R6/etc/__xconfigfile__
+Server configuration file
+.TP 8
+.IR __projectroot__/lib/X11/__xconfigfile__. hostname
+Server configuration file
+.TP 8
+.I __projectroot__/lib/X11/__xconfigfile__
+Server configuration file
+.TP 8
+.I __projectroot__/lib/X11/app-default/XOrgCfg
+Specifies xorgcfg resources
+.TP 8
+.I __projectroot__/lib/X11/xkb/X0-config.keyboard
+Keyboard specific configuration
+
+.SH "SEE ALSO"
+.IR __xservername__ (__appmansuffix__)
+.IR __xconfigfile__ (__filemansuffix__)
+
+.SH COPYRIGHT
+.TP 8
+Copyright 2000, Conectiva Linux S.A.
+\fIhttp://www.conectiva.com\fP
+.TP 8
+Copyright 2000, The XFree86 Project
+\fIhttp://www.XFree86.org\fP
+
+.SH AUTHORS
+.TP 8
+Paulo C\'esar Pereira de Andrade \fI<pcpa@conectiva.com.br>\fP
+originally for The XFree86 Project.
+
+.SH BUGS
+Probably.
diff --git a/hw/xfree86/utils/xorgconfig/Cards b/hw/xfree86/utils/xorgconfig/Cards
index 857135de4..f6ce99cf5 100644
--- a/hw/xfree86/utils/xorgconfig/Cards
+++ b/hw/xfree86/utils/xorgconfig/Cards
@@ -2979,7 +2979,7 @@ NOCLOCKPROBE
NAME Appian Jeronimo 2000
CHIPSET PERMEDIA 3
-SERVER XFree86
+SERVER 3DLabs
DRIVER glint
NOCLOCKPROBE
diff --git a/hw/xfree86/utils/xorgconfig/xorgconfig.c b/hw/xfree86/utils/xorgconfig/xorgconfig.c
new file mode 100644
index 000000000..7f4c18d6a
--- /dev/null
+++ b/hw/xfree86/utils/xorgconfig/xorgconfig.c
@@ -0,0 +1,2906 @@
+/* $XFree86: xc/programs/Xserver/hw/xfree86/xf86config/xf86config.c,v 3.69 2003/02/20 04:05:15 dawes Exp $ */
+
+/*
+ * This is a configuration program that will create a base XF86Config
+ * file based on menu choices. Its main feature is that clueless users
+ * may be less inclined to select crazy sync rates way over monitor spec,
+ * by presenting a menu with standard monitor types. Also some people
+ * don't read docs unless an executable that they can run tells them to.
+ *
+ * It assumes a 24-line or bigger text console.
+ *
+ * Revision history:
+ * 25Sep94 Initial version.
+ * 27Sep94 Fix hsync range of monitor types to match with best possible mode.
+ * Remove 'const'.
+ * Tweak descriptions.
+ * 28Sep94 Fixes from J"org Wunsch:
+ * Don't use gets().
+ * Add mouse device prompt.
+ * Fix lines overrun for 24-line console.
+ * Increase buffer size for probeonly output.
+ * 29Sep94 Fix bad bug with old XF86Config preserving during probeonly run.
+ * Add note about vertical refresh in interlaced modes.
+ * Name gets() replacement getstring().
+ * Add warning about binary paths.
+ * Fixes from David Dawes:
+ * Don't use 'ln -sf'.
+ * Omit man path reference in comment.
+ * Generate only a generic 320x200 SVGA section for accel cards.
+ * Only allow writing to /usr/X11R6/lib/X11 if root, and use
+ * -xf86config for the -probeonly phase (root only).
+ * Fix bug that forces screen type to accel in some cases.
+ * 30Sep94 Continue after clocks probe fails.
+ * Note about programmable clocks.
+ * Rename to 'xf86config'. Not to be confused with XF86Config
+ * or the -xf86config option.
+ * 07Oct94 Correct hsync in standard mode timings comments, and include
+ * the proper +/-h/vsync flags.
+ * 11Oct94 Skip 'numclocks:' and 'pixel clocks:' lines when probing for
+ * clocks.
+ * 18Oct94 Add check for existence of /usr/X11R6.
+ * Add note about ctrl-alt-backspace.
+ * 06Nov94 Add comment above standard mode timings in XF86Config.
+ * 24Dec94 Add low-resolution modes using doublescan.
+ * 29Dec94 Add note in horizontal sync range selection.
+ * Ask about ClearDTR/RTS option for Mouse Systems mice.
+ * Ask about writing to /etc/XF86Config.
+ * Allow link to be set in /var/X11R6/bin.
+ * Note about X -probeonly crashing.
+ * Add keyboard Alt binding option for non-ASCII characters.
+ * Add card database selection.
+ * Write temporary XF86Config for clock probing in /tmp instead
+ * of /usr/X11R6/lib/X11.
+ * Add RAMDAC and Clockchip menu.
+ * 27Mar99 Modified for XFree86 4.0 config file format
+ * 06Sep02 Write comment block about 'DontVTSwitch'.
+ *
+ * Possible enhancements:
+ * - Add more standard mode timings (also applies to README.Config). Missing
+ * are 1024x768 @ 72 Hz, 1152x900 modes, and 1280x1024 @ ~70 Hz.
+ * I suspect there is a VESA standard for 1024x768 @ 72 Hz with 77 MHz dot
+ * clock, and 1024x768 @ 75 Hz with 78.7 MHz dot clock. New types of
+ * monitors probably work better with VESA 75 Hz timings.
+ * - Add option for creation of clear, minimal XF86Config.
+ * - The card database doesn't include most of the entries in previous
+ * databases.
+ *
+ * Send comments to H.Hanemaayer@inter.nl.net.
+ *
+ * Things to keep up-to-date:
+ * - Accelerated server names.
+ * - Ramdac and Clockchip settings.
+ * - The card database.
+ *
+ */
+/* Oct2000
+ * New 'Configuration of XKB' section.
+ * Author: Ivan Pascal The XFree86 Project.
+ */
+/*
+ * Nov2002
+ * Some enhancements:
+ * - Add new PS/2 mouse protocol.
+ * "IMPS/2","ExplorerPS/2","ThinkingMousePS/2","MouseManPlusPS/2",
+ * "GlidePointPS/2","NetMousePS/2" and "NetScrollPS/2".
+ * - Add mouse-speed setting for PS/2 mouse.
+ * - Fix seg.fault problem on Solaris.
+ * - Add modestring "1400x1050"(for ATI Mobile-Rage).
+ * - Add videomemory 8192, 16384, 32768, 65536, 131072 and 262144.
+ * - Load "speedo" module.
+ * - Ready to DRI.
+ * - Load xtt module instead of freetype module.
+ * - Add font path "/fonts/TrueType/" and "/fonts/freefont/".
+ * Chisato Yamauchi(cyamauch@phyas.aichi-edu.ac.jp)
+ */
+/* $XConsortium: xf86config.c /main/21 1996/10/28 05:43:57 kaleb $ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <ctype.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+/* hv: fix a few EMX problems, will disappear with real UnixOS/2 */
+#ifdef __UNIXOS2__
+#define sync() /*nothing*/
+static int getuid() { return 0; }
+#endif
+
+
+#include <X11/Xlib.h>
+#include <X11/extensions/XKBstr.h>
+#include <X11/extensions/XKBrules.h>
+#define MAX_XKBOPTIONS 5
+
+#include "cards.h"
+
+
+/*
+ * Define the following to 310 to remove references to XFree86 features that
+ * have been added since XFree86 3.1 (e.g. DoubleScan modes).
+ * or to 311 to remove certain new modelines
+ */
+#define XFREE86_VERSION 400
+
+/*
+ * This is the filename of the temporary XF86Config file that is written
+ * when the program is told to probe clocks (which can only happen for
+ * root).
+ */
+#define TEMPORARY_XF86CONFIG_DIR_PREFIX "/tmp/.xf86config"
+#define TEMPORARY_XF86CONFIG_FILENAME "XF86Config.tmp"
+
+/*
+ * Define this to have /etc/X11/XF86Config prompted for as the default
+ * location to write the XF86Config file to.
+ */
+#define PREFER_XF86CONFIG_IN_ETC
+
+/*
+ * Define this to force the user to go through XKB configuration section.
+ *
+ */
+#define FORCE_XKB_DIALOG
+
+/*
+ * Configuration variables.
+ */
+
+#define MAX_CLOCKS_LINES 16
+
+#define DUMBCONFIG2 "dumbconfig.2"
+#define DUMBCONFIG3 "dumbconfig.3"
+#ifndef __UNIXOS2__
+#define XSERVERNAME_FOR_PROBE "X"
+#else
+#define XSERVERNAME_FOR_PROBE "/usr/X11R6/bin/"__XSERVERNAME__
+#endif
+
+/* some more vars to make path names in texts more flexible. OS/2 users
+ * may be more irritated than Unix users
+ */
+#ifndef PROJECTROOT
+#define PROJECTROOT "/usr/X11R6"
+#endif
+#define TREEROOT PROJECTROOT
+#define TREEROOTLX TREEROOT "/lib/X11"
+#define TREEROOTCFG TREEROOT "/etc/X11"
+#define MODULEPATH TREEROOT "/lib/modules"
+
+#ifndef XCONFIGFILE
+#define XCONFIGFILE "XF86Config"
+#endif
+#define CONFIGNAME XCONFIGFILE
+
+#ifndef XF86_VERSION_MAJOR
+#ifdef XVERSION
+#if XVERSION > 40000000
+#define XF86_VERSION_MAJOR (XVERSION / 10000000)
+#else
+#define XF86_VERSION_MAJOR (XVERSION / 1000)
+#endif
+#else
+#define XF86_VERSION_MAJOR 4
+#endif
+#endif
+
+
+int config_mousetype; /* Mouse. */
+int config_emulate3buttons;
+int config_chordmiddle;
+int config_cleardtrrts;
+char *config_pointerdevice;
+int config_altmeta; /* Keyboard. */
+int config_monitortype; /* Monitor. */
+char *config_hsyncrange;
+char *config_vsyncrange;
+char *config_monitoridentifier;
+int config_videomemory; /* Video card. */
+int config_screentype; /* mono, vga16, svga, accel */
+char *config_deviceidentifier;
+int config_numberofclockslines;
+char *config_clocksline[MAX_CLOCKS_LINES];
+char *config_modesline8bpp;
+char *config_modesline16bpp;
+char *config_modesline24bpp;
+int config_virtual; /* 1 (yes) or 0 (no) */
+int config_virtualx8bpp, config_virtualy8bpp;
+int config_virtualx16bpp, config_virtualy16bpp;
+int config_virtualx24bpp, config_virtualy24bpp;
+char *config_ramdac;
+char *config_dacspeed;
+char *config_clockchip;
+#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT)
+char *config_keyboard_dev = "/dev/wskbd0";
+#endif
+int config_xkbdisable = 0;
+char *config_xkbrules;
+char *config_xkbmodel = "pc101";
+char *config_xkblayout = "us";
+char *config_xkbvariant = (char *) 0;
+char *config_xkboptions = (char *) 0;
+char *config_depth;
+
+char *temp_dir = "";
+
+/*
+ * These are from the selected card definition. Parameters from the
+ * definition are offered during the questioning about the video card.
+ */
+
+int card_selected; /* Card selected from database. */
+
+
+static void write_XF86Config(char *filename);
+
+
+/*
+ * This is the initial intro text that appears when the program is started.
+ */
+
+static char *intro_text =
+"\n"
+"This program will create a basic " CONFIGNAME " file, based on menu selections you\n"
+"make.\n"
+"\n"
+"The " CONFIGNAME " file usually resides in " TREEROOTCFG " or /etc/X11. A sample\n"
+CONFIGNAME " file is supplied with "__XSERVERNAME__"; it is configured for a standard\n"
+"VGA card and monitor with 640x480 resolution. This program will ask for a\n"
+"pathname when it is ready to write the file.\n"
+"\n"
+"You can either take the sample " CONFIGNAME " as a base and edit it for your\n"
+"configuration, or let this program produce a base " CONFIGNAME " file for your\n"
+"configuration and fine-tune it.\n"
+#if 0
+" Refer to " TREEROOTLX "/doc/README.Config\n"
+"for a detailed overview of the configuration process.\n"
+"\n"
+"(what should we change this section to?)\n"
+"For accelerated servers (including accelerated drivers in the SVGA server),\n"
+"there are many chipset and card-specific options and settings. This program\n"
+"does not know about these. On some configurations some of these settings must\n"
+"be specified. Refer to the server man pages and chipset-specific READMEs.\n"
+#endif
+"\n"
+"Before continuing with this program, make sure you know what video card\n"
+"you have, and preferably also the chipset it uses and the amount of video\n"
+"memory on your video card. SuperProbe may be able to help with this.\n"
+"\n"
+;
+
+static char *finalcomment_text =
+"File has been written. Take a look at it before running 'startx'. Note that\n"
+"the " CONFIGNAME " file must be in one of the directories searched by the server\n"
+"(e.g. /etc/X11) in order to be used. Within the server press\n"
+"ctrl, alt and '+' simultaneously to cycle video resolutions. Pressing ctrl,\n"
+"alt and backspace simultaneously immediately exits the server (use if\n"
+"the monitor doesn't sync for a particular mode).\n"
+"\n"
+"For further configuration, refer to the " XCONFIGFILE "(5) manual page.\n"
+"\n";
+
+static void *
+Malloc(int i) {
+ void *p;
+
+ p = malloc(i);
+ if (p == NULL) {
+ printf("Fatal malloc error\n");
+ exit(-1);
+ }
+ return p;
+}
+
+static char *
+Strdup(const char *s){
+ char *d;
+
+ d = Malloc(strlen(s) + 1);
+ strcpy(d, s);
+ return d;
+}
+
+static void
+createtmpdir(void) {
+ /* length of prefix + 20 (digits in 2**64) + 1 (slash) + 1 */
+ temp_dir = Malloc(strlen(TEMPORARY_XF86CONFIG_DIR_PREFIX) + 22);
+ sprintf(temp_dir, "%s%ld", TEMPORARY_XF86CONFIG_DIR_PREFIX,
+ (long)getpid());
+ if (mkdir(temp_dir, 0700) != 0) {
+ printf("Cannot create directory %s\n", temp_dir);
+ exit(-1);
+ }
+ /* append a slash */
+ strcat(temp_dir, "/");
+}
+
+
+void
+keypress(void) {
+ printf("Press enter to continue, or ctrl-c to abort.");
+ getchar();
+ printf("\n");
+}
+
+static void
+emptylines(void) {
+ int i;
+ for (i = 0; i < 50; i++)
+ printf("\n");
+}
+
+static int
+answerisyes(char *s)
+{
+ if (s[0] == '\'') /* For fools that type the ' literally. */
+ return tolower(s[1]) == 'y';
+ return tolower(s[0]) == 'y';
+}
+
+/*
+ * This is a replacement for gets(). Limit is 80 chars.
+ * The 386BSD descendants scream about using gets(), for good reason.
+ */
+
+static void
+getstring(char *s)
+{
+ char *cp;
+ if (fgets(s, 80, stdin) == NULL)
+ exit(1);
+ cp = strchr(s, '\n');
+ if (cp)
+ *cp=0;
+}
+
+/*
+ * Mouse configuration.
+ *
+ * (hv) OS/2 (__UNIXOS2__) only has an OS supported mouse, so user has no options
+ * the server will enable a third button automatically if there is one
+ * We also do the same for QNX4, since we use the OS mouse drivers.
+ */
+
+int M_OSMOUSE, M_WSMOUSE, M_AUTO,
+ M_SYSMOUSE, M_MOUSESYSTEMS, M_PS2,
+ M_MICROSOFT, M_BUSMOUSE, M_IMPS2,
+ M_EXPLORER_PS2, M_GLIDEPOINT_PS2, M_MOUSEMANPLUS_PS2,
+ M_NETMOUSE_PS2, M_NETSCROLL_PS2, M_THINKINGMOUSE_PS2,
+ M_ACECAD, M_GLIDEPOINT, M_INTELLIMOUSE,
+ M_LOGITECH, M_MMHITTAB, M_MMSERIES,
+ M_MOUSEMAN, M_THINKINGMOUSE;
+
+struct {
+ char *name;
+ int *ident;
+ char *desc;
+} mouse_info[] = {
+#if defined(__UNIXOS2__) || defined(QNX4)
+#define DEF_PROTO_STRING "OSMOUSE"
+ {"OSMOUSE", &M_OSMOUSE,
+ "OSMOUSE"
+ },
+#endif
+#ifdef WSCONS_SUPPORT
+#define WS_MOUSE_STRING "wsmouse"
+#define DEF_PROTO_STRING WS_MOUSE_STRING
+ {WS_MOUSE_STRING, &M_WSMOUSE,
+ "wsmouse protocol"
+ },
+#endif
+#ifndef DEF_PROTO_STRING
+#define DEF_PROTO_STRING "Auto"
+#endif
+ {"Auto", &M_AUTO,
+ "Auto detect"
+ },
+ {"SysMouse", &M_SYSMOUSE,
+ "SysMouse"
+ },
+#define M_MOUSESYSTEMS_STRING "MouseSystems"
+ {M_MOUSESYSTEMS_STRING, &M_MOUSESYSTEMS,
+ "Mouse Systems (3-button protocol)"
+ },
+ {"PS/2", &M_PS2,
+ "PS/2 Mouse"
+ },
+#define M_MICROSOFT_STRING "Microsoft"
+ {M_MICROSOFT_STRING, &M_MICROSOFT,
+ "Microsoft compatible (2-button protocol)"
+ },
+ {"Busmouse", &M_BUSMOUSE,
+ "Bus Mouse"
+ },
+#ifndef __FreeBSD__
+ {"IMPS/2", &M_IMPS2,
+ "IntelliMouse PS/2"
+ },
+ {"ExplorerPS/2", &M_EXPLORER_PS2,
+ "Explorer PS/2"
+ },
+ {"GlidePointPS/2", &M_GLIDEPOINT_PS2,
+ "GlidePoint PS/2"
+ },
+ {"MouseManPlusPS/2", &M_MOUSEMANPLUS_PS2,
+ "MouseManPlus PS/2"
+ },
+ {"NetMousePS/2", &M_NETMOUSE_PS2,
+ "NetMouse PS/2"
+ },
+ {"NetScrollPS/2", &M_NETSCROLL_PS2,
+ "NetScroll PS/2"
+ },
+ {"ThinkingMousePS/2", &M_THINKINGMOUSE_PS2,
+ "ThinkingMouse PS/2"
+ },
+#endif
+ {"AceCad", &M_ACECAD,
+ "AceCad"
+ },
+ {"GlidePoint", &M_GLIDEPOINT,
+ "GlidePoint"
+ },
+ {"IntelliMouse", &M_INTELLIMOUSE,
+ "Microsoft IntelliMouse"
+ },
+ {"Logitech", &M_LOGITECH,
+ "Logitech Mouse (serial, old type, Logitech protocol)"
+ },
+ {"MMHitTab", &M_MMHITTAB,
+ "MM HitTablet"
+ },
+ {"MMSeries", &M_MMSERIES,
+ "MM Series" /* XXXX These descriptions should be improved. */
+ },
+ {"MouseMan", &M_MOUSEMAN,
+ "Logitech MouseMan (Microsoft compatible)"
+ },
+ {"ThinkingMouse", &M_THINKINGMOUSE,
+ "ThinkingMouse"
+ },
+};
+
+#ifndef __UNIXOS2__
+static char *mouseintro_text =
+"First specify a mouse protocol type. Choose one from the following list:\n"
+"\n";
+
+static char *mousedev_text =
+"Now give the full device name that the mouse is connected to, for example\n"
+"/dev/tty00. Just pressing enter will use the default, /dev/mouse.\n"
+#ifdef WSCONS_SUPPORT
+"On systems with wscons, the default is /dev/wsmouse.\n"
+#endif
+#ifdef __FreeBSD__
+"On FreeBSD, the default is /dev/sysmouse.\n"
+#endif
+"\n";
+
+static char *mousecomment_text =
+"The recommended protocol is " DEF_PROTO_STRING ". If you have a very old mouse\n"
+"or don't want OS support or auto detection, and you have a two-button\n"
+"or three-button serial mouse, it is most likely of type " M_MICROSOFT_STRING ".\n"
+#ifdef WSCONS_SUPPORT
+"\n"
+"If your system uses the wscons console driver, with a PS/2 type mouse,\n"
+"select " WS_MOUSE_STRING ".\n"
+#endif
+"\n";
+
+static char *twobuttonmousecomment_text =
+"You have selected a two-button mouse protocol. It is recommended that you\n"
+"enable Emulate3Buttons.\n";
+
+static char *threebuttonmousecomment_text =
+"You have selected a three-button mouse protocol. It is recommended that you\n"
+"do not enable Emulate3Buttons, unless the third button doesn't work.\n";
+
+static char *unknownbuttonsmousecomment_text =
+"If your mouse has only two buttons, it is recommended that you enable\n"
+"Emulate3Buttons.\n";
+
+static char *microsoftmousecomment_text =
+"You have selected a Microsoft protocol mouse. If your mouse was made by\n"
+"Logitech, you might want to enable ChordMiddle which could cause the\n"
+"third button to work.\n";
+
+static char *mousesystemscomment_text =
+"You have selected a Mouse Systems protocol mouse. If your mouse is normally\n"
+"in Microsoft-compatible mode, enabling the ClearDTR and ClearRTS options\n"
+"may cause it to switch to Mouse Systems mode when the server starts.\n";
+
+static char *logitechmousecomment_text =
+"You have selected a Logitech protocol mouse. This is only valid for old\n"
+"Logitech mice.\n";
+
+static char *mousemancomment_text =
+"You have selected a Logitech MouseMan type mouse. You might want to enable\n"
+"ChordMiddle which could cause the third button to work.\n";
+
+#endif /* !__UNIXOS2__ */
+
+static void
+mouse_configuration(void) {
+
+#if !defined(__UNIXOS2__) && !defined(QNX4)
+ int i, j;
+ char s[80];
+
+#define MOUSETYPE_COUNT sizeof(mouse_info)/sizeof(mouse_info[0])
+ for (i = 0; i < MOUSETYPE_COUNT; i++)
+ *(mouse_info[i].ident) = i;
+
+ for (i=0;;) {
+ emptylines();
+ printf("%s", mouseintro_text);
+ for (j = i; j < i + 14 && j < MOUSETYPE_COUNT; j++)
+ printf("%2d. %s\n", j + 1, mouse_info[j].name);
+ printf("\n");
+ printf("%s", mousecomment_text);
+ printf("Enter a protocol number: ");
+ getstring(s);
+ if (strlen(s) == 0) {
+ i += 14;
+ if (i >= MOUSETYPE_COUNT)
+ i = 0;
+ continue;
+ }
+ config_mousetype = atoi(s) - 1;
+ if (config_mousetype >= 0 && config_mousetype < MOUSETYPE_COUNT)
+ break;
+ }
+ printf("\n");
+
+ if (config_mousetype == M_LOGITECH) {
+ /* Logitech. */
+ printf("%s", logitechmousecomment_text);
+ printf("\n");
+ printf("Please answer the following question with either 'y' or 'n'.\n");
+ printf("Are you sure it's really not a Microsoft compatible one? ");
+ getstring(s);
+ if (!answerisyes(s))
+ config_mousetype = M_MICROSOFT;
+ printf("\n");
+ }
+
+ config_chordmiddle = 0;
+ if (config_mousetype == M_MICROSOFT || config_mousetype == M_MOUSEMAN) {
+ /* Microsoft or MouseMan. */
+ if (config_mousetype == M_MICROSOFT)
+ printf("%s", microsoftmousecomment_text);
+ else
+ printf("%s", mousemancomment_text);
+ printf("\n");
+ printf("Please answer the following question with either 'y' or 'n'.\n");
+ printf("Do you want to enable ChordMiddle? ");
+ getstring(s);
+ if (answerisyes(s))
+ config_chordmiddle = 1;
+ printf("\n");
+ }
+
+ config_cleardtrrts = 0;
+ if (config_mousetype == M_MOUSESYSTEMS) {
+ /* Mouse Systems. */
+ printf("%s", mousesystemscomment_text);
+ printf("\n");
+ printf("Please answer the following question with either 'y' or 'n'.\n");
+ printf("Do you want to enable ClearDTR and ClearRTS? ");
+ getstring(s);
+ if (answerisyes(s))
+ config_cleardtrrts = 1;
+ printf("\n");
+ }
+
+ if (config_mousetype == M_MICROSOFT) {
+ if (config_chordmiddle)
+ printf("%s", threebuttonmousecomment_text);
+ else
+ printf("%s", twobuttonmousecomment_text);
+ }
+ else if (config_mousetype == M_MOUSESYSTEMS ||
+ config_mousetype == M_INTELLIMOUSE) {
+ printf("%s", threebuttonmousecomment_text);
+ }
+ else {
+ printf("%s", unknownbuttonsmousecomment_text);
+ }
+
+ printf("\n");
+
+ printf("Please answer the following question with either 'y' or 'n'.\n");
+ printf("Do you want to enable Emulate3Buttons? ");
+ getstring(s);
+ if (answerisyes(s))
+ config_emulate3buttons = 1;
+ else
+ config_emulate3buttons = 0;
+ printf("\n");
+
+ printf("%s", mousedev_text);
+ printf("Mouse device: ");
+ getstring(s);
+ if (strlen(s) == 0)
+#ifdef WSCONS_SUPPORT
+ config_pointerdevice = "/dev/wsmouse";
+#elif defined(__FreeBSD__)
+ config_pointerdevice = "/dev/sysmouse";
+#else
+ config_pointerdevice = "/dev/mouse";
+#endif
+ else {
+ config_pointerdevice = Malloc(strlen(s) + 1);
+ strcpy(config_pointerdevice, s);
+ }
+ printf("\n");
+
+#else /* __UNIXOS2__ */
+ /* set some reasonable defaults for OS/2 */
+ config_mousetype = M_OSMOUSE;
+ config_chordmiddle = 0;
+ config_cleardtrrts = 0;
+ config_emulate3buttons = 0;
+#if !defined(QNX4)
+ config_pointerdevice = "OS2MOUSE";
+#else
+ config_pointerdevice = "QNXMOUSE";
+#endif
+#endif /* __UNIXOS2__ */
+}
+
+
+/*
+ * Keyboard configuration.
+ */
+
+/*
+ * Configuration of XKB
+ */
+static char *xkbmodeltext =
+"Please select one of the following keyboard types that is the better\n"
+"description of your keyboard. If nothing really matches,\n"
+"choose 1 (Generic 101-key PC)\n\n";
+
+static char *xkblayouttext =
+"Please select the layout corresponding to your keyboard\n";
+
+static char *xkbvarianttext =
+"Please enter a variant name for '%s' layout. Or just press enter\n"
+"for default variant\n\n";
+
+static char *xkboptionstext =
+"Please answer the following question with either 'y' or 'n'.\n"
+"Do you want to select additional XKB options (group switcher,\n"
+"group indicator, etc.)? ";
+
+#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT)
+static char *kbdevtext =
+"Please enter the device name for your keyboard or just press enter\n"
+"for the default of wskbd0\n\n";
+#endif
+
+static void
+keyboard_configuration(void)
+{
+ int i, j;
+ char s[80];
+ char *rulesfile;
+ int number, options[MAX_XKBOPTIONS], num_options;
+ XkbRF_RulesPtr rules;
+
+#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT)
+ printf(kbdevtext);
+ getstring(s);
+ if (strlen(s) != 0) {
+ config_keyboard_dev = Malloc(strlen(s) + 1);
+ strcpy(config_keyboard_dev, s);
+ }
+#endif
+
+#ifdef XFREE98_XKB
+ config_xkbrules = "xfree98"; /* static */
+ rulesfile = XKB_RULES_DIR "/xfree98";
+#else
+ config_xkbrules = __XKBDEFRULES__; /* static */
+ rulesfile = XKB_RULES_DIR "/";
+#endif
+
+ rules = XkbRF_Load(rulesfile, "", True, False);
+ emptylines();
+
+ if (!rules) {
+ printf("XKB rules file '%s' not found\n", rulesfile);
+ printf("Keyboard XKB options will be set to default values.\n");
+ keypress();
+ return;
+ }
+
+ number = -1;
+ for (i=0;;) {
+ emptylines();
+ printf(xkbmodeltext);
+ for (j = i; j < i + 16 && j < rules->models.num_desc; j++)
+ printf("%3d %-50s\n", j+1, rules->models.desc[j].desc);
+ printf("\nEnter a number to choose the keyboard.\n\n");
+ if (rules->models.num_desc >= 16)
+ printf("Press enter for the next page\n");
+ getstring(s);
+ if (strlen(s) == 0) {
+ i += 16;
+ if (i > rules->models.num_desc)
+ i = 0;
+ continue;
+ }
+ number = atoi(s) - 1;
+ if (number >= 0 && number < rules->models.num_desc)
+ break;
+ }
+
+ i = strlen(rules->models.desc[number].name) + 1;
+ config_xkbmodel = Malloc(i);
+ sprintf(config_xkbmodel,"%s", rules->models.desc[number].name);
+
+ emptylines();
+ printf(xkblayouttext);
+
+ number = -1;
+ for (i=0;;) {
+ emptylines();
+ for (j = i; j < i + 18 && j < rules->layouts.num_desc; j++)
+ printf("%3d %-50s\n", j+1,
+ rules->layouts.desc[j].desc);
+ printf("\n");
+ printf("Enter a number to choose the country.\n");
+ if (rules->layouts.num_desc >= 18)
+ printf("Press enter for the next page\n");
+ printf("\n");
+ getstring(s);
+ if (strlen(s) == 0) {
+ i += 18;
+ if (i > rules->layouts.num_desc)
+ i = 0;
+ continue;
+ }
+ number = atoi(s) - 1;
+ if (number >= 0 && number < rules->layouts.num_desc)
+ break;
+ }
+ config_xkblayout = Malloc(strlen(rules->layouts.desc[number].name)+1);
+ sprintf(config_xkblayout,"%s", rules->layouts.desc[number].name);
+
+ emptylines();
+ printf(xkbvarianttext, config_xkblayout);
+ getstring(s);
+ if (strlen(s) != 0) {
+ config_xkbvariant = Malloc(strlen(s) + 1);
+ strcpy(config_xkbvariant, s);
+ }
+
+ emptylines();
+ printf(xkboptionstext);
+ getstring(s);
+ if (!answerisyes(s))
+ return;
+
+ num_options = 0;
+ for (j=0,i=0;;) {
+ if (!strchr(rules->options.desc[i].name, ':')) {
+ emptylines();
+ printf(" %s\n\n", rules->options.desc[i].desc);
+ j = i;
+ } else {
+ printf("%3d %-50s\n", i - j, rules->options.desc[i].desc);
+ }
+ i++;
+ if ( i == rules->options.num_desc ||
+ !strchr(rules->options.desc[i].name, ':')) {
+ printf("\nPlease select the option or just press enter if none\n");
+ getstring(s);
+ if (strlen(s) != 0) {
+ number = atoi(s);
+ if (number && (num_options < MAX_XKBOPTIONS)) {
+ options[num_options++] = number + j;
+ }
+ }
+ }
+ if (i == rules->options.num_desc)
+ break;
+ }
+
+ if (!num_options)
+ return;
+
+ for (j=0,i=0; i<num_options; i++) {
+ j += strlen(rules->options.desc[options[i]].name);
+ }
+ config_xkboptions = Malloc(j + num_options);
+ for (j=0,i=0; i<num_options; i++) {
+ j += sprintf(config_xkboptions+j,"%s%s",
+ i == 0 ? "": "," ,rules->options.desc[options[i]].name);
+ }
+ return;
+}
+
+
+
+/*
+ * Monitor configuration.
+ */
+
+static char *monitorintro_text =
+"Now we want to set the specifications of the monitor. The two critical\n"
+"parameters are the vertical refresh rate, which is the rate at which the\n"
+"the whole screen is refreshed, and most importantly the horizontal sync rate,\n"
+"which is the rate at which scanlines are displayed.\n"
+"\n"
+"The valid range for horizontal sync and vertical sync should be documented\n"
+"in the manual of your monitor. If in doubt, check the monitor database\n"
+TREEROOTLX "/doc/Monitors to see if your monitor is there.\n"
+"\n";
+
+static char *hsyncintro_text =
+"You must indicate the horizontal sync range of your monitor. You can either\n"
+"select one of the predefined ranges below that correspond to industry-\n"
+"standard monitor types, or give a specific range.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a horizontal\n"
+"sync range that is beyond the capabilities of your monitor. If in doubt,\n"
+"choose a conservative setting.\n"
+"\n";
+
+static char *customhsync_text =
+"Please enter the horizontal sync range of your monitor, in the format used\n"
+"in the table of monitor types above. You can either specify one or more\n"
+"continuous ranges (e.g. 15-25, 30-50), or one or more fixed sync frequencies.\n"
+"\n";
+
+static char *vsyncintro_text =
+"You must indicate the vertical sync range of your monitor. You can either\n"
+"select one of the predefined ranges below that correspond to industry-\n"
+"standard monitor types, or give a specific range. For interlaced modes,\n"
+"the number that counts is the high one (e.g. 87 Hz rather than 43 Hz).\n"
+"\n"
+" 1 50-70\n"
+" 2 50-90\n"
+" 3 50-100\n"
+" 4 40-150\n"
+" 5 Enter your own vertical sync range\n";
+
+static char *monitordescintro_text =
+"You must now enter a few identification/description strings, namely an\n"
+"identifier, a vendor name, and a model name. Just pressing enter will fill\n"
+"in default names.\n"
+"\n";
+
+#define NU_MONITORTYPES 10
+
+static char *monitortype_range[NU_MONITORTYPES] = {
+ "31.5",
+ "31.5 - 35.1",
+ "31.5, 35.5",
+ "31.5, 35.15, 35.5",
+ "31.5 - 37.9",
+ "31.5 - 48.5",
+ "31.5 - 57.0",
+ "31.5 - 64.3",
+ "31.5 - 79.0",
+ "31.5 - 82.0"
+};
+
+static char *monitortype_name[NU_MONITORTYPES] = {
+ "Standard VGA, 640x480 @ 60 Hz",
+ "Super VGA, 800x600 @ 56 Hz",
+ "8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x600)",
+ "Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz",
+ "Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz",
+ "Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz",
+ "High Frequency SVGA, 1024x768 @ 70 Hz",
+ "Monitor that can do 1280x1024 @ 60 Hz",
+ "Monitor that can do 1280x1024 @ 74 Hz",
+ "Monitor that can do 1280x1024 @ 76 Hz"
+};
+
+static void
+monitor_configuration(void) {
+ int i;
+ char s[80];
+ printf("%s", monitorintro_text);
+
+ keypress();
+ emptylines();
+
+ printf("%s", hsyncintro_text);
+
+ printf(" hsync in kHz; monitor type with characteristic modes\n");
+ for (i = 0; i < NU_MONITORTYPES; i++)
+ printf("%2d %s; %s\n", i + 1, monitortype_range[i],
+ monitortype_name[i]);
+
+ printf("%2d Enter your own horizontal sync range\n",
+ NU_MONITORTYPES + 1);
+ printf("\n");
+
+ printf("Enter your choice (1-%d): ", NU_MONITORTYPES + 1);
+ getstring(s);
+ config_monitortype = atoi(s) - 1;
+ if (config_monitortype < 0)
+ config_monitortype = 0;
+
+ printf("\n");
+
+ if (config_monitortype < NU_MONITORTYPES)
+ config_hsyncrange = monitortype_range[config_monitortype];
+ else {
+ /* Custom hsync range option selected. */
+ printf("%s", customhsync_text);
+ printf("Horizontal sync range: ");
+ getstring(s);
+ config_hsyncrange = Malloc(strlen(s) + 1);
+ strcpy(config_hsyncrange, s);
+ printf("\n");
+ }
+
+ printf("%s", vsyncintro_text);
+ printf("\n");
+
+ printf("Enter your choice: ");
+ getstring(s);
+ printf("\n");
+ switch (atoi(s)) {
+ case 0 :
+ case 1 :
+ config_vsyncrange = "50-70";
+ break;
+ case 2 :
+ config_vsyncrange = "50-90";
+ break;
+ case 3 :
+ config_vsyncrange = "50-100";
+ break;
+ case 4 :
+ config_vsyncrange = "40-150";
+ break;
+ case 5 :
+ /* Custom vsync range option selected. */
+ printf("Vertical sync range: ");
+ getstring(s);
+ config_vsyncrange = Malloc(strlen(s) + 1);
+ strcpy(config_vsyncrange, s);
+ printf("\n");
+ break;
+ }
+ printf("%s", monitordescintro_text);
+ printf("The strings are free-form, spaces are allowed.\n");
+ printf("Enter an identifier for your monitor definition: ");
+ getstring(s);
+ if (strlen(s) == 0)
+ config_monitoridentifier = "My Monitor";
+ else {
+ config_monitoridentifier = Malloc(strlen(s) + 1);
+ strcpy(config_monitoridentifier, s);
+ }
+}
+
+
+/*
+ * Card database.
+ */
+
+static char *cardintro_text =
+"Now we must configure video card specific settings. At this point you can\n"
+"choose to make a selection out of a database of video card definitions.\n"
+"Because there can be variation in Ramdacs and clock generators even\n"
+"between cards of the same model, it is not sensible to blindly copy\n"
+"the settings (e.g. a Device section). For this reason, after you make a\n"
+"selection, you will still be asked about the components of the card, with\n"
+"the settings from the chosen database entry presented as a strong hint.\n"
+"\n"
+"The database entries include information about the chipset, what driver to\n"
+"run, the Ramdac and ClockChip, and comments that will be included in the\n"
+"Device section. However, a lot of definitions only hint about what driver\n"
+"to run (based on the chipset the card uses) and are untested.\n"
+"\n"
+"If you can't find your card in the database, there's nothing to worry about.\n"
+"You should only choose a database entry that is exactly the same model as\n"
+"your card; choosing one that looks similar is just a bad idea (e.g. a\n"
+"GemStone Snail 64 may be as different from a GemStone Snail 64+ in terms of\n"
+"hardware as can be).\n"
+"\n";
+
+static char *cardunsupported_text =
+"This card is basically UNSUPPORTED. It may only work as a generic\n"
+"VGA-compatible card. If you have an "__XSERVERNAME__" version more recent than what\n"
+"this card definition was based on, there's a chance that it is now\n"
+"supported.\n";
+
+static void
+carddb_configuration(void) {
+ int i;
+ char s[80];
+ card_selected = -1;
+ printf("%s", cardintro_text);
+ printf("Do you want to look at the card database? ");
+ getstring(s);
+ printf("\n");
+ if (!answerisyes(s))
+ return;
+
+ /*
+ * Choose a database entry.
+ */
+ if (parse_database()) {
+ printf("Couldn't read card database file %s.\n",
+ CARD_DATABASE_FILE);
+ keypress();
+ return;
+ }
+
+ i = 0;
+ for (;;) {
+ int j;
+ emptylines();
+ for (j = i; j < i + 18 && j <= lastcard; j++) {
+ char *name = card[j].name,
+ *chipset = card[j].chipset;
+
+ printf("%3d %-50s%s\n", j,
+ name ? name : "-",
+ chipset ? chipset : "-");
+ }
+ printf("\n");
+ printf("Enter a number to choose the corresponding card definition.\n");
+ printf("Press enter for the next page, q to continue configuration.\n");
+ printf("\n");
+ getstring(s);
+ if (s[0] == 'q')
+ break;
+ if (strlen(s) == 0) {
+ i += 18;
+ if (i > lastcard)
+ i = 0;
+ continue;
+ }
+ card_selected = atoi(s);
+ if (card_selected >= 0 && card_selected <= lastcard)
+ break;
+ }
+
+ /*
+ * Look at the selected card.
+ */
+ if (card_selected != -1) {
+ char *name = card[card_selected].name,
+ *chipset = card[card_selected].chipset;
+
+ printf("\nYour selected card definition:\n\n");
+ printf("Identifier: %s\n", name ? name : "-");
+ printf("Chipset: %s\n", chipset ? chipset : "-");
+ if (!card[card_selected].driver)
+ card[card_selected].driver = "unknown";
+ printf("Driver: %s\n", card[card_selected].driver);
+
+ if (card[card_selected].ramdac != NULL)
+ printf("Ramdac: %s\n", card[card_selected].ramdac);
+ if (card[card_selected].dacspeed != NULL)
+ printf("DacSpeed: %s\n", card[card_selected].dacspeed);
+ if (card[card_selected].clockchip != NULL)
+ printf("Clockchip: %s\n", card[card_selected].clockchip);
+ if (card[card_selected].flags & NOCLOCKPROBE)
+ printf("Do NOT probe clocks or use any Clocks line.\n");
+ if (card[card_selected].flags & UNSUPPORTED)
+ printf("%s", cardunsupported_text);
+#if 0 /* Might be confusing. */
+ if (strlen(card[card_selected].lines) > 0)
+ printf("Device section text:\n%s",
+ card[card_selected].lines);
+#endif
+ printf("\n");
+ keypress();
+ }
+}
+
+
+/*
+ * Screen/video card configuration.
+ */
+
+static char *deviceintro_text =
+"Now you must give information about your video card. This will be used for\n"
+"the \"Device\" section of your video card in " CONFIGNAME ".\n"
+"\n";
+
+static char *videomemoryintro_text =
+"It is probably a good idea to use the same approximate amount as that detected\n"
+"by the server you intend to use. If you encounter problems that are due to the\n"
+"used server not supporting the amount memory you have, specify the maximum\n"
+"amount supported by the server.\n"
+"\n"
+"How much video memory do you have on your video card:\n"
+"\n";
+
+static char *carddescintro_text =
+"You must now enter a few identification/description strings, namely an\n"
+"identifier, a vendor name, and a model name. Just pressing enter will fill\n"
+"in default names (possibly from a card definition).\n"
+"\n";
+
+#if 0
+static char *devicesettingscomment_text =
+"Especially for accelerated drivers, Ramdac, Dacspeed and ClockChip settings\n"
+"or special options may be required in the Device section.\n"
+"\n";
+
+static char *ramdaccomment_text =
+"The RAMDAC setting only applies to some drivers. Some RAMDAC's are\n"
+"auto-detected by the server. The detection of a RAMDAC is forced by using a\n"
+"Ramdac \"identifier\" line in the Device section. The identifiers are shown\n"
+"at the right of the following table of RAMDAC types:\n"
+"\n";
+
+#define NU_RAMDACS 24
+
+static char *ramdac_name[NU_RAMDACS] = {
+ "AT&T 20C490 (S3 and AGX servers, ARK driver)",
+ "AT&T 20C498/21C498/22C498 (S3, autodetected)",
+ "AT&T 20C409/20C499 (S3, autodetected)",
+ "AT&T 20C505 (S3)",
+ "BrookTree BT481 (AGX)",
+ "BrookTree BT482 (AGX)",
+ "BrookTree BT485/9485 (S3)",
+ "Sierra SC15025 (S3, AGX)",
+#if XFREE86_VERSION >= 311
+ "S3 GenDAC (86C708) (autodetected)",
+ "S3 SDAC (86C716) (autodetected)",
+#else
+ "S3 GenDAC (86C708)",
+ "S3 SDAC (86C716)",
+#endif
+ "STG-1700 (S3, autodetected)",
+ "STG-1703 (S3, autodetected)",
+ "TI 3020 (S3, autodetected)",
+ "TI 3025 (S3, autodetected)",
+ "TI 3026 (S3, autodetected)",
+ "IBM RGB 514 (S3, autodetected)",
+ "IBM RGB 524 (S3, autodetected)",
+ "IBM RGB 525 (S3, autodetected)",
+ "IBM RGB 526 (S3)",
+ "IBM RGB 528 (S3, autodetected)",
+ "ICS5342 (S3, ARK)",
+ "ICS5341 (W32)",
+ "IC Works w30C516 ZoomDac (ARK)",
+ "Normal DAC"
+};
+
+static char *ramdac_id[NU_RAMDACS] = {
+ "att20c490", "att20c498", "att20c409", "att20c505", "bt481", "bt482",
+ "bt485", "sc15025", "s3gendac", "s3_sdac", "stg1700","stg1703",
+ "ti3020", "ti3025", "ti3026", "ibm_rgb514", "ibm_rgb524",
+ "ibm_rgb525", "ibm_rgb526", "ibm_rgb528", "ics5342", "ics5341",
+ "zoomdac", "normal"
+};
+
+static char *clockchipcomment_text =
+"A Clockchip line in the Device section forces the detection of a\n"
+"programmable clock device. With a clockchip enabled, any required\n"
+"clock can be programmed without requiring probing of clocks or a\n"
+"Clocks line. Most cards don't have a programmable clock chip.\n"
+"Choose from the following list:\n"
+"\n";
+
+#define NU_CLOCKCHIPS 12
+
+static char *clockchip_name[] = {
+ "Chrontel 8391",
+ "ICD2061A and compatibles (ICS9161A, DCS2824)",
+ "ICS2595",
+ "ICS5342 (similar to SDAC, but not completely compatible)",
+ "ICS5341",
+ "S3 GenDAC (86C708) and ICS5300 (autodetected)",
+ "S3 SDAC (86C716)",
+ "STG 1703 (autodetected)",
+ "Sierra SC11412",
+ "TI 3025 (autodetected)",
+ "TI 3026 (autodetected)",
+ "IBM RGB 51x/52x (autodetected)",
+};
+
+static char *clockchip_id[] = {
+ "ch8391", "icd2061a", "ics2595", "ics5342", "ics5341",
+ "s3gendac", "s3_sdac",
+ "stg1703", "sc11412", "ti3025", "ti3026", "ibm_rgb5xx",
+};
+
+static char *deviceclockscomment_text =
+"For most modern configurations, a Clocks line is neither required or\n"
+"desirable. However for some older hardware it can be useful since it\n"
+"prevents the slow and nasty sounding clock probing at server start-up.\n"
+"Probed clocks are displayed at server startup, along with other server\n"
+"and hardware configuration info. You can save this information in a file\n"
+"by running 'X -probeonly 2>output_file'. Be warned that clock probing is\n"
+"inherently imprecise; some clocks may be slightly too high (varies per run).\n"
+"\n";
+
+static char *deviceclocksquestion_text =
+"At this point I can run X -probeonly, and try to extract the clock information\n"
+"from the output. It is recommended that you do this yourself and if a set of\n"
+"clocks is shown then you add a clocks line (note that the list of clocks may\n"
+"be split over multiple Clocks lines) to your Device section afterwards. Be\n"
+"aware that a clocks line is not appropriate for most modern hardware that\n"
+"has programmable clocks.\n"
+"\n"
+"You must be root to be able to run X -probeonly now.\n"
+"\n";
+
+static char *probeonlywarning_text =
+"It is possible that the hardware detection routines in the server will somehow\n"
+"cause the system to crash and the screen to remain blank. If this is the\n"
+"case, do not choose this option the next time. The server may need a\n"
+"Ramdac, ClockChip or special option (e.g. \"nolinear\" for S3) to probe\n"
+"and start-up correctly.\n"
+"\n";
+#endif
+
+static char *modesorderintro_text =
+"For each depth, a list of modes (resolutions) is defined. The default\n"
+"resolution that the server will start-up with will be the first listed\n"
+"mode that can be supported by the monitor and card.\n"
+"Currently it is set to:\n"
+"\n";
+
+static char *modesorder_text2 =
+"Modes that cannot be supported due to monitor or clock constraints will\n"
+"be automatically skipped by the server.\n"
+"\n"
+" 1 Change the modes for 8-bit (256 colors)\n"
+" 2 Change the modes for 16-bit (32K/64K colors)\n"
+" 3 Change the modes for 24-bit (24-bit color)\n"
+" 4 The modes are OK, continue.\n"
+"\n";
+
+static char *modeslist_text =
+"Please type the digits corresponding to the modes that you want to select.\n"
+"For example, 432 selects \"1024x768\" \"800x600\" \"640x480\", with a\n"
+"default mode of 1024x768.\n"
+"\n";
+
+static char *virtual_text =
+"You can have a virtual screen (desktop), which is screen area that is larger\n"
+"than the physical screen and which is panned by moving the mouse to the edge\n"
+"of the screen. If you don't want virtual desktop at a certain resolution,\n"
+"you cannot have modes listed that are larger. Each color depth can have a\n"
+"differently-sized virtual screen\n"
+"\n";
+
+static int videomemory[] = {
+ 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072, 262144
+};
+
+/* Is this required? */
+#if XFREE86_VERSION >= 400
+#define NU_MODESTRINGS 13
+#else
+#if XFREE86_VERSION >= 330
+#define NU_MODESTRINGS 12
+#else
+#if XFREE86_VERSION >= 311
+#define NU_MODESTRINGS 8
+#else
+#define NU_MODESTRINGS 5
+#endif
+#endif
+#endif
+
+static char *modestring[NU_MODESTRINGS] = {
+ "\"640x400\"",
+ "\"640x480\"",
+ "\"800x600\"",
+ "\"1024x768\"",
+ "\"1280x1024\"",
+#if XFREE86_VERSION >= 311
+ "\"320x200\"",
+ "\"320x240\"",
+ "\"400x300\""
+#endif
+#if XFREE86_VERSION >= 330
+ ,"\"1152x864\"",
+ "\"1600x1200\"",
+ "\"1800x1400\"",
+ "\"512x384\""
+#endif
+#if XFREE86_VERSION >= 400
+ ,"\"1400x1050\""
+#endif
+};
+
+#ifdef __EMX__
+/* yet another instance of this code, sigh! */
+char *
+__XOS2RedirRoot(char *path, char sep)
+{
+ static char pn[300];
+ char *root;
+ int i,l;
+ if ((isalpha(path[0]) && path[1]==':') || path[0] != '/')
+ return path;
+
+ root = getenv("X11ROOT");
+ if (!root) root = "";
+ sprintf(pn,"%s%s",root,path);
+ if (sep=='\\') {
+ l = strlen(pn);
+ for (i=0; i<l; i++)
+ if (pn[i]=='/') pn[i]='\\';
+ }
+ return pn;
+}
+#endif
+
+/* (hv) to avoid the UNIXISM to try to open a dir to check for existance */
+static int exists_dir(char *name) {
+ struct stat sbuf;
+
+#ifdef __EMX__
+ name = __XOS2RedirRoot(name,'/');
+#endif
+ /* is it there ? */
+ if (stat(name,&sbuf) == -1)
+ return 0;
+
+ /* is there, but is it a dir? */
+ return S_ISDIR(sbuf.st_mode) ? 1 : 0;
+}
+
+static void
+screen_configuration(void) {
+ int i, c/*, np*/;
+ char s[80];
+
+ /*
+ * Configure the "Device" section for the video card.
+ */
+
+ printf("%s", deviceintro_text);
+
+ printf("%s", videomemoryintro_text);
+
+ for (i = 0; i < sizeof(videomemory) / sizeof(videomemory[0]); i++)
+ printf("%2d %dK\n", i + 1, videomemory[i]);
+ printf("%2d Other\n\n", i + 1);
+
+ printf("Enter your choice: ");
+ getstring(s);
+ printf("\n");
+
+ c = atoi(s) - 1;
+ if (c >= 0 && c < sizeof(videomemory) / sizeof(videomemory[0]))
+ config_videomemory = videomemory[c];
+ else {
+ printf("Amount of video memory in Kbytes: ");
+ getstring(s);
+ config_videomemory = atoi(s);
+ printf("\n");
+ }
+
+ printf("%s", carddescintro_text);
+ if (card_selected != -1)
+ printf("Your card definition is %s.\n\n",
+ card[card_selected].name);
+ printf("The strings are free-form, spaces are allowed.\n");
+ printf("Enter an identifier for your video card definition: ");
+ getstring(s);
+ if (strlen(s) == 0)
+ if (card_selected != -1)
+ config_deviceidentifier = card[card_selected].name;
+ else
+ config_deviceidentifier = "My Video Card";
+ else {
+ config_deviceidentifier = Malloc(strlen(s) + 1);
+ strcpy(config_deviceidentifier, s);
+ }
+ printf("\n");
+
+ emptylines();
+
+ /*
+ * Initialize screen mode variables for svga and accel
+ * to default values.
+ * XXXX Doesn't leave room for off-screen caching in 16/32bpp modes
+ * for the accelerated servers in some situations.
+ */
+ config_modesline8bpp =
+ config_modesline16bpp =
+ config_modesline24bpp = "\"640x480\"";
+ config_virtualx8bpp = config_virtualx16bpp = config_virtualx24bpp =
+ config_virtualy8bpp = config_virtualy16bpp = config_virtualy24bpp = 0;
+ if (config_videomemory >= 4096) {
+ config_virtualx8bpp = 1600;
+ config_virtualy8bpp = 1280;
+ if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
+ /*
+ * Allow room for font/pixmap cache for accel
+ * servers.
+ */
+ config_virtualx16bpp = 1280;
+ config_virtualy16bpp = 1024;
+ }
+ else {
+ config_virtualx16bpp = 1600;
+ config_virtualy16bpp = 1280;
+ }
+ if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
+ config_virtualx24bpp = 1152;
+ config_virtualy24bpp = 900;
+ }
+ else {
+ config_virtualx24bpp = 1280;
+ config_virtualy24bpp = 1024;
+ }
+ /* Add 1600x1280 */
+ config_modesline8bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\"";
+ config_modesline16bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\"";
+ config_modesline24bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\"";
+
+ }
+ else
+ if (config_videomemory >= 2048) {
+ if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
+ /*
+ * Allow room for font/pixmap cache for accel
+ * servers.
+ * Also the mach32 is has a limited width.
+ */
+ config_virtualx8bpp = 1280;
+ config_virtualy8bpp = 1024;
+ }
+ else {
+ config_virtualx8bpp = 1600;
+ config_virtualy8bpp = 1200;
+ }
+ if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
+ config_virtualx16bpp = 1024;
+ config_virtualy16bpp = 768;
+ }
+ else {
+ config_virtualx16bpp = 1152;
+ config_virtualy16bpp = 900;
+ }
+ config_virtualx24bpp = 800;
+ config_virtualy24bpp = 600;
+ if (config_videomemory >= 2048 + 256) {
+ config_virtualx24bpp = 1024;
+ config_virtualy24bpp = 768;
+ }
+ config_modesline8bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\"";
+ config_modesline16bpp = "\"1024x768\" \"800x600\" \"640x480\"";
+ if (config_videomemory >= 2048 + 256)
+ config_modesline24bpp = "\"1024x768\" \"800x600\" \"640x480\"";
+ else
+ config_modesline24bpp = "\"800x600\" \"640x480\"";
+ }
+ else
+ if (config_videomemory >= 1024) {
+ if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
+ /*
+ * Allow room for font/pixmap cache for accel
+ * servers.
+ */
+ config_virtualx8bpp = 1024;
+ config_virtualy8bpp = 768;
+ }
+ else {
+ config_virtualx8bpp = 1152;
+ config_virtualy8bpp = 900;
+ }
+ config_virtualx16bpp = 800; /* Forget about cache space; */
+ config_virtualy16bpp = 600; /* it's small enough as it is. */
+ config_virtualx24bpp = 640;
+ config_virtualy24bpp = 480;
+ config_modesline8bpp = "\"1024x768\" \"800x600\" \"640x480\"";
+ config_modesline16bpp = "\"800x600\" \"640x480\"";
+ config_modesline24bpp = "\"640x480\"";
+ }
+ else
+ if (config_videomemory >= 512) {
+ config_virtualx8bpp = 800;
+ config_virtualy8bpp = 600;
+ config_modesline8bpp = "\"800x600\" \"640x480\"";
+ config_modesline16bpp = "\"640x400\"";
+ }
+ else
+ if (config_videomemory >= 256) {
+ config_modesline8bpp = "\"640x400\"";
+ config_virtualx8bpp = 640;
+ config_virtualy8bpp = 400;
+ }
+ else {
+ printf("Fatal error: Invalid amount of video memory.\n");
+ exit(-1);
+ }
+
+#if 0
+ /*
+ * Handle the Ramdac/Clockchip setting.
+ */
+
+ printf("%s", devicesettingscomment_text);
+
+ if (card_selected == -1 || (card[card_selected].flags & UNSUPPORTED))
+ goto skipramdacselection;
+
+ printf("%s", ramdaccomment_text);
+
+ /* meanwhile there are so many RAMDACs that they do no longer fit on
+ * on page
+ */
+ for (np=12, i=0 ;;) {
+ int j;
+ for (j = i; j < i + np && j < NU_RAMDACS; j++)
+ printf("%3d %-60s%s\n", j+1,
+ ramdac_name[j],
+ ramdac_id[j]);
+
+ printf("\n");
+ if (card_selected != -1)
+ if (card[card_selected].ramdac != NULL)
+ printf("The card definition has Ramdac \"%s\".\n\n",
+ card[card_selected].ramdac);
+ printf("\n");
+ printf("Enter a number to choose the corresponding RAMDAC.\n");
+ printf("Press enter for the next page, q to quit without selection of a RAMDAC.\n");
+ printf("\n");
+ getstring(s);
+
+ config_ramdac = NULL;
+ if (s[0] == 'q')
+ break;
+
+ if (strlen(s) > 0) {
+ c = atoi(s)-1;
+ if (c >= 0 && c < NU_RAMDACS) {
+ config_ramdac = ramdac_id[atoi(s)-1];
+ break;
+ }
+ }
+
+ i += np;
+ if (np==12) np = 18; /* account intro lines only displayed 1st time */
+ if (i >= NU_RAMDACS)
+ i = 0;
+ emptylines();
+ }
+
+skipramdacselection:
+ emptylines();
+ printf("%s", clockchipcomment_text);
+
+ for (i = 0; i < NU_CLOCKCHIPS; i++)
+ printf("%2d %-60s%s\n",
+ i + 1, clockchip_name[i], clockchip_id[i]);
+
+ printf("\n");
+
+ if (card_selected != -1)
+ if (card[card_selected].clockchip != NULL)
+ printf("The card definition has Clockchip \"%s\"\n\n",
+ card[card_selected].clockchip);
+
+ printf("Just press enter if you don't want a Clockchip setting.\n");
+ printf("What Clockchip setting do you want (1-%d)? ", NU_CLOCKCHIPS);
+
+ getstring(s);
+ config_clockchip = NULL;
+ if (strlen(s) > 0)
+ config_clockchip = clockchip_id[atoi(s) - 1];
+
+ emptylines();
+
+ /*
+ * Optionally run X -probeonly to figure out the clocks.
+ */
+
+ config_numberofclockslines = 0;
+
+ printf("%s", deviceclockscomment_text);
+
+ printf("%s", deviceclocksquestion_text);
+#endif
+
+#if 0
+ /*
+ * XXX Change this to check for a CLOCKPROBE flag rather than an
+ * NOCLOCKPROBE.
+ */
+ if (card_selected != -1)
+ if (card[card_selected].flags & NOCLOCKPROBE)
+ printf("The card definition says to NOT probe clocks.\n");
+
+ if (config_clockchip != NULL) {
+ printf("Because you have enabled a Clockchip line, there's no need for clock\n"
+ "probing.\n");
+ keypress();
+ goto skipclockprobing;
+ }
+
+ printf("Do you want me to run 'X -probeonly' now? ");
+ getstring(s);
+ printf("\n");
+ if (answerisyes(s)) {
+ /*
+ * Write temporary XF86Config and run X -probeonly.
+ * Only allow when root.
+ */
+ FILE *f;
+ char *buf;
+ char syscmdline[2*256+100]; /* enough */
+ char *fname = NULL;
+ char *d2name = NULL;
+ char *d3name = NULL;
+
+ if (getuid() != 0) {
+ printf("Sorry, you must be root to do this.\n\n");
+ goto endofprobeonly;
+ }
+ printf("%s", probeonlywarning_text);
+ keypress();
+ fname = Malloc(strlen(temp_dir) +
+ strlen(TEMPORARY_XF86CONFIG_FILENAME) + 1);
+ sprintf(fname, "%s%s", temp_dir,
+ TEMPORARY_XF86CONFIG_FILENAME);
+ d2name = Malloc(strlen(temp_dir) + strlen(DUMBCONFIG2) + 1);
+ sprintf(d2name, "%s%s", temp_dir, DUMBCONFIG2);
+ d3name = Malloc(strlen(temp_dir) + strlen(DUMBCONFIG3) + 1);
+ sprintf(d3name, "%s%s", temp_dir, DUMBCONFIG3);
+ printf("Running X -probeonly -pn -xf86config %s.\n", fname);
+ write_XF86Config(fname);
+#ifndef __EMX__
+ sync();
+#endif
+ /* compose a line with the real path */
+#ifndef __EMX__
+ sprintf(syscmdline, "X -probeonly -pn -xf86config %s 2> %s",
+ fname, d2name);
+#else
+ /* OS/2 does not have symlinks, so "X" does not exist,
+ * call the real X server
+ */
+ sprintf(syscmdline,"%s/"__XSERVERNAME__" -probeonly -pn -xf86config "
+ TEMPORARY_XF86CONFIG_FILENAME " 2>" DUMBCONFIG2,
+ __XOS2RedirRoot("/"__XSERVERNAME__"/bin",'\\'),
+ card[card_selected].server);
+#endif
+
+ if (system(syscmdline)) {
+ printf("X -probeonly call failed.\n");
+ printf("No Clocks line inserted.\n");
+ goto clocksprobefailed;
+ }
+ /* Look for 'clocks:' (case sensitive). */
+ sprintf(syscmdline, "grep clocks\\: %s > %s", d2name, d3name);
+ if (system(syscmdline)) {
+ printf("grep failed.\n");
+ printf("Cannot find clocks in server output.\n");
+ goto clocksprobefailed;
+ }
+ f = fopen(d3name, "r");
+ buf = Malloc(8192);
+ /* Parse lines. */
+ while (fgets(buf, 8192, f) != NULL) {
+ char *clks;
+ clks = strstr(buf, "clocks: ") + 8;
+ if (clks >= buf + 3 && strcmp(clks - 11, "num") == 0)
+ /* Reject lines with 'numclocks:'. */
+ continue;
+ if (clks >= buf + 8 && strcpy(clks - 14, "pixel ") == 0)
+ /* Reject lines with 'pixel clocks:'. */
+ continue;
+ clks[strlen(clks) - 1] = '\0'; /* Remove '\n'. */
+ config_clocksline[config_numberofclockslines] =
+ Malloc(strlen(clks) + 1);
+ strcpy(config_clocksline[config_numberofclockslines],
+ clks);
+ printf("Clocks %s\n", clks);
+ config_numberofclockslines++;
+ }
+ fclose(f);
+clocksprobefailed:
+ unlink(d3name);
+ unlink(d2name);
+ unlink(fname);
+ printf("\n");
+
+endofprobeonly:
+ keypress();
+ }
+skipclockprobing:
+#endif
+
+ /*
+ * For vga driver, no further configuration is required.
+ */
+ if (card_selected == -1 || (card[card_selected].flags & UNSUPPORTED))
+ return;
+
+ /*
+ * Configure the modes order.
+ */
+ config_virtual = 0;
+ for (;;) {
+ char modes[128];
+
+ emptylines();
+
+ printf("%s", modesorderintro_text);
+ printf("%s for 8-bit\n", config_modesline8bpp);
+ printf("%s for 16-bit\n", config_modesline16bpp);
+ printf("%s for 24-bit\n", config_modesline24bpp);
+ printf("\n");
+ printf("%s", modesorder_text2);
+
+ printf("Enter your choice: ");
+ getstring(s);
+ printf("\n");
+
+ c = atoi(s) - 1;
+ if (c < 0 || c >= 3)
+ break;
+
+ printf("Select modes from the following list:\n\n");
+
+ for (i = 0; i < NU_MODESTRINGS; i++)
+ printf(" %c %s\n", i < 9 ? '1' + i :
+ 'a' + i - 9,
+ modestring[i]);
+ printf("\n");
+
+ printf("%s", modeslist_text);
+
+ printf("Which modes? ");
+ getstring(s);
+ printf("\n");
+
+ modes[0] = '\0';
+ for (i = 0; i < strlen(s); i++) {
+ if ( NU_MODESTRINGS > 9 ) {
+ if ((s[i] < '1' || s[i] > '9') &&
+ (s[i] < 'a' || s[i] > 'a' + NU_MODESTRINGS - 10)) {
+ printf("Invalid mode skipped.\n");
+ continue;
+ }
+ }
+ else {
+ if (s[i] < '1' || s[i] > '0' + NU_MODESTRINGS) {
+ printf("Invalid mode skipped.\n");
+ continue;
+ }
+ }
+ if (i > 0)
+ strcat(modes, " ");
+ strcat(modes, modestring[s[i] <= '9' ? s[i] - '1' :
+ s[i] - 'a' + 9]);
+ }
+ switch (c) {
+ case 0 :
+ config_modesline8bpp = Malloc(strlen(modes) + 1);
+ strcpy(config_modesline8bpp, modes);
+ break;
+ case 1 :
+ config_modesline16bpp = Malloc(strlen(modes) + 1);
+ strcpy(config_modesline16bpp, modes);
+ break;
+ case 2 :
+ config_modesline24bpp = Malloc(strlen(modes) + 1);
+ strcpy(config_modesline24bpp, modes);
+ break;
+ }
+
+ printf("%s", virtual_text);
+
+ printf("Please answer the following question with either 'y' or 'n'.\n");
+ printf("Do you want a virtual screen that is larger than the physical screen?");
+ getstring(s);
+ if (answerisyes(s))
+ config_virtual = 1;
+ }
+}
+
+static char *defaultdepthtext =
+"Please specify which color depth you want to use by default:\n"
+"\n";
+
+static struct depth_str {
+ char *name;
+ char *desc;
+} depth_list[] = {
+ { "1", "1 bit (monochrome)" },
+ { "4", "4 bits (16 colors)" },
+ { "8", "8 bits (256 colors)" },
+ { "16", "16 bits (65536 colors)" },
+ { "24", "24 bits (16 million colors)" }
+};
+
+static int ndepths = sizeof(depth_list)/sizeof(struct depth_str);
+
+static void
+depth_configuration(void)
+{
+ int i;
+ char s[80];
+ int depth;
+
+ printf(defaultdepthtext);
+ for (i=0; i<ndepths; i++) {
+ printf("%3d %-50s\n",i+1,depth_list[i].desc);
+ }
+
+ printf("\nEnter a number to choose the default depth.\n\n");
+ getstring(s);
+ if (strlen(s) == 0)
+ depth = 0;
+ else {
+ i = atoi(s)-1;
+ depth = (i < 0 || i > ndepths) ? 0 : i;
+ }
+ config_depth = depth_list[depth].name;
+}
+
+/*
+ * Create the XF86Config file.
+ */
+
+static char *XF86Config_firstchunk_text =
+"# File generated by xf86config.\n"
+"\n"
+"#\n"
+"# Copyright (c) 2004, by the "XVENDORNAMESHORT"\n"
+"#\n"
+"# Permission is hereby granted, free of charge, to any person obtaining a\n"
+"# copy of this software and associated documentation files (the \"Software\"),\n"
+"# to deal in the Software without restriction, including without limitation\n"
+"# the rights to use, copy, modify, merge, publish, distribute, sublicense,\n"
+"# and/or sell copies of the Software, and to permit persons to whom the\n"
+"# Software is furnished to do so, subject to the following conditions:\n"
+"# \n"
+"# The above copyright notice and this permission notice shall be included in\n"
+"# all copies or substantial portions of the Software.\n"
+"# \n"
+"# THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\n"
+"# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
+"# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL\n"
+"# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,\n"
+"# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF\n"
+"# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\n"
+"# SOFTWARE.\n"
+"# \n"
+"# Except as contained in this notice, the name of "XVENDORNAMESHORT" shall\n"
+"# not be used in advertising or otherwise to promote the sale, use or other\n"
+"# dealings in this Software without prior written authorization from the\n"
+"# "XVENDORNAMESHORT".\n"
+"#\n"
+"\n"
+"# **********************************************************************\n"
+"# Refer to the XF86Config(4/5) man page for details about the format of \n"
+"# this file.\n"
+"# **********************************************************************\n"
+"\n"
+"# **********************************************************************\n"
+"# Module section -- this section is used to specify\n"
+"# which dynamically loadable modules to load.\n"
+"# **********************************************************************\n"
+"#\n"
+"Section \"Module\"\n"
+"\n"
+"# This loads the DBE extension module.\n"
+"\n"
+" Load \"dbe\" # Double buffer extension\n"
+"\n"
+"# This loads the miscellaneous extensions module, and disables\n"
+"# initialisation of the XFree86-DGA extension within that module.\n"
+" SubSection \"extmod\"\n"
+" Option \"omit xfree86-dga\" # don't initialise the DGA extension\n"
+" EndSubSection\n"
+"\n"
+"# This loads the Type1 and FreeType font modules\n"
+" Load \"type1\"\n"
+" Load \"speedo\"\n"
+" Load \"freetype\"\n"
+"# Load \"xtt\"\n"
+"\n"
+"# This loads the GLX module\n"
+"# Load \"glx\"\n"
+"# This loads the DRI module\n"
+"# Load \"dri\"\n"
+"\n"
+"EndSection\n"
+"\n"
+"# **********************************************************************\n"
+"# Files section. This allows default font and rgb paths to be set\n"
+"# **********************************************************************\n"
+"\n"
+"Section \"Files\"\n"
+"\n"
+"# The location of the RGB database. Note, this is the name of the\n"
+"# file minus the extension (like \".txt\" or \".db\"). There is normally\n"
+"# no need to change the default.\n"
+"\n"
+" RgbPath \"" TREEROOTLX "/rgb\"\n"
+"\n"
+"# Multiple FontPath entries are allowed (which are concatenated together),\n"
+"# as well as specifying multiple comma-separated entries in one FontPath\n"
+"# command (or a combination of both methods)\n"
+"# \n"
+"# If you don't have a floating point coprocessor and emacs, Mosaic or other\n"
+"# programs take long to start up, try moving the Type1 and Speedo directory\n"
+"# to the end of this list (or comment them out).\n"
+"# \n"
+"\n";
+
+static char *XF86Config_fontpaths[] =
+{
+/* " FontPath \"" TREEROOTLX "/fonts/75dpi/\"\n"*/
+ "/fonts/local/",
+ "/fonts/misc/",
+ "/fonts/75dpi/:unscaled",
+ "/fonts/100dpi/:unscaled",
+ "/fonts/Speedo/",
+ "/fonts/Type1/",
+ "/fonts/TrueType/",
+ "/fonts/freefont/",
+ "/fonts/75dpi/",
+ "/fonts/100dpi/",
+ 0 /* end of fontpaths */
+};
+
+static char *XF86Config_fontpathchunk_text =
+
+"\n"
+"# The module search path. The default path is shown here.\n"
+"\n"
+"# ModulePath \"" MODULEPATH "\"\n"
+"\n"
+"EndSection\n"
+"\n"
+"# **********************************************************************\n"
+"# Server flags section.\n"
+"# **********************************************************************\n"
+"\n"
+"Section \"ServerFlags\"\n"
+"\n"
+"# Uncomment this to cause a core dump at the spot where a signal is \n"
+"# received. This may leave the console in an unusable state, but may\n"
+"# provide a better stack trace in the core dump to aid in debugging\n"
+"\n"
+"# Option \"NoTrapSignals\"\n"
+"\n"
+"# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence\n"
+"# (where n is 1 through 12). This allows clients to receive these key\n"
+"# events.\n"
+"\n"
+"# Option \"DontVTSwitch\"\n"
+"\n"
+"# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence\n"
+"# This allows clients to receive this key event.\n"
+"\n"
+"# Option \"DontZap\"\n"
+"\n"
+"# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching\n"
+"# sequences. This allows clients to receive these key events.\n"
+"\n"
+"# Option \"Dont Zoom\"\n"
+"\n"
+"# Uncomment this to disable tuning with the xvidtune client. With\n"
+"# it the client can still run and fetch card and monitor attributes,\n"
+"# but it will not be allowed to change them. If it tries it will\n"
+"# receive a protocol error.\n"
+"\n"
+"# Option \"DisableVidModeExtension\"\n"
+"\n"
+"# Uncomment this to enable the use of a non-local xvidtune client. \n"
+"\n"
+"# Option \"AllowNonLocalXvidtune\"\n"
+"\n"
+"# Uncomment this to disable dynamically modifying the input device\n"
+"# (mouse and keyboard) settings. \n"
+"\n"
+"# Option \"DisableModInDev\"\n"
+"\n"
+"# Uncomment this to enable the use of a non-local client to\n"
+"# change the keyboard or mouse settings (currently only xset).\n"
+"\n"
+"# Option \"AllowNonLocalModInDev\"\n"
+"\n"
+"EndSection\n"
+"\n"
+"# **********************************************************************\n"
+"# Input devices\n"
+"# **********************************************************************\n"
+"\n"
+"# **********************************************************************\n"
+"# Core keyboard's InputDevice section\n"
+"# **********************************************************************\n"
+"\n"
+"Section \"InputDevice\"\n"
+"\n"
+" Identifier \"Keyboard1\"\n"
+" Driver \"Keyboard\"\n"
+"\n"
+"# For most OSs the protocol can be omitted (it defaults to \"Standard\").\n"
+"# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),\n"
+"# uncomment the following line.\n"
+"\n"
+"# Option \"Protocol\" \"Xqueue\"\n"
+"\n"
+" Option \"AutoRepeat\" \"500 30\"\n"
+"\n"
+"# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))\n"
+"# Option \"Xleds\" \"1 2 3\"\n"
+"\n";
+
+static char *keyboardchunk2_text =
+"\n";
+
+static char *keyboardchunk3_text =
+"# To customise the XKB settings to suit your keyboard, modify the\n"
+"# lines below (which are the defaults). For example, for a non-U.S.\n"
+"# keyboard, you will probably want to use:\n"
+"# Option \"XkbModel\" \"pc102\"\n"
+"# If you have a US Microsoft Natural keyboard, you can use:\n"
+"# Option \"XkbModel\" \"microsoft\"\n"
+"#\n"
+"# Then to change the language, change the Layout setting.\n"
+"# For example, a german layout can be obtained with:\n"
+"# Option \"XkbLayout\" \"de\"\n"
+"# or:\n"
+"# Option \"XkbLayout\" \"de\"\n"
+"# Option \"XkbVariant\" \"nodeadkeys\"\n"
+"#\n"
+"# If you'd like to switch the positions of your capslock and\n"
+"# control keys, use:\n"
+"# Option \"XkbOptions\" \"ctrl:swapcaps\"\n"
+"\n"
+"# These are the default XKB settings for "XVENDORNAMESHORT"\n"
+"# Option \"XkbRules\" \"__XKBDEFRULES__\"\n"
+"# Option \"XkbModel\" \"pc101\"\n"
+"# Option \"XkbLayout\" \"us\"\n"
+"# Option \"XkbVariant\" \"\"\n"
+"# Option \"XkbOptions\" \"\"\n"
+"\n";
+
+static char *keyboardlastchunk_text =
+"\n"
+"EndSection\n"
+"\n"
+"\n";
+
+static char *pointersection_text1 =
+"# **********************************************************************\n"
+"# Core Pointer's InputDevice section\n"
+"# **********************************************************************\n"
+"\n"
+"Section \"InputDevice\"\n"
+"\n"
+"# Identifier and driver\n"
+"\n"
+" Identifier \"Mouse1\"\n"
+" Driver \"mouse\"\n"
+;
+
+static char *pointersection_text2 =
+"\n"
+"# Mouse-speed setting for PS/2 mouse.\n"
+"\n"
+"# Option \"Resolution\" \"256\"\n"
+"\n"
+"# When using XQUEUE, comment out the above two lines, and uncomment\n"
+"# the following line.\n"
+"\n"
+"# Option \"Protocol\" \"Xqueue\"\n"
+"\n"
+"# Baudrate and SampleRate are only for some Logitech mice. In\n"
+"# almost every case these lines should be omitted.\n"
+"\n"
+"# Option \"BaudRate\" \"9600\"\n"
+"# Option \"SampleRate\" \"150\"\n"
+"\n"
+"# Emulate3Buttons is an option for 2-button Microsoft mice\n"
+"# Emulate3Timeout is the timeout in milliseconds (default is 50ms)\n"
+"\n";
+
+static char *xinputsection_text =
+"# **********************************************************************\n"
+"# Other input device sections \n"
+"# this is optional and is required only if you\n"
+"# are using extended input devices. This is for example only. Refer\n"
+"# to the XF86Config man page for a description of the options.\n"
+"# **********************************************************************\n"
+"#\n"
+"# Section \"InputDevice\" \n"
+"# Identifier \"Mouse2\"\n"
+"# Driver \"mouse\"\n"
+"# Option \"Protocol\" \"MouseMan\"\n"
+"# Option \"Device\" \"/dev/mouse2\"\n"
+"# EndSection\n"
+"#\n"
+"# Section \"InputDevice\"\n"
+"# Identifier \"spaceball\"\n"
+"# Driver \"magellan\"\n"
+"# Option \"Device\" \"/dev/cua0\"\n"
+"# EndSection\n"
+"#\n"
+"# Section \"InputDevice\"\n"
+"# Identifier \"spaceball2\"\n"
+"# Driver \"spaceorb\"\n"
+"# Option \"Device\" \"/dev/cua0\"\n"
+"# EndSection\n"
+"#\n"
+"# Section \"InputDevice\"\n"
+"# Identifier \"touchscreen0\"\n"
+"# Driver \"microtouch\"\n"
+"# Option \"Device\" \"/dev/ttyS0\"\n"
+"# Option \"MinX\" \"1412\"\n"
+"# Option \"MaxX\" \"15184\"\n"
+"# Option \"MinY\" \"15372\"\n"
+"# Option \"MaxY\" \"1230\"\n"
+"# Option \"ScreenNumber\" \"0\"\n"
+"# Option \"ReportingMode\" \"Scaled\"\n"
+"# Option \"ButtonNumber\" \"1\"\n"
+"# Option \"SendCoreEvents\"\n"
+"# EndSection\n"
+"#\n"
+"# Section \"InputDevice\"\n"
+"# Identifier \"touchscreen1\"\n"
+"# Driver \"elo2300\"\n"
+"# Option \"Device\" \"/dev/ttyS0\"\n"
+"# Option \"MinX\" \"231\"\n"
+"# Option \"MaxX\" \"3868\"\n"
+"# Option \"MinY\" \"3858\"\n"
+"# Option \"MaxY\" \"272\"\n"
+"# Option \"ScreenNumber\" \"0\"\n"
+"# Option \"ReportingMode\" \"Scaled\"\n"
+"# Option \"ButtonThreshold\" \"17\"\n"
+"# Option \"ButtonNumber\" \"1\"\n"
+"# Option \"SendCoreEvents\"\n"
+"# EndSection\n"
+"\n";
+
+static char *monitorsection_text1 =
+"# **********************************************************************\n"
+"# Monitor section\n"
+"# **********************************************************************\n"
+"\n"
+"# Any number of monitor sections may be present\n"
+"\n"
+"Section \"Monitor\"\n"
+"\n";
+
+static char *monitorsection_text2 =
+"# HorizSync is in kHz unless units are specified.\n"
+"# HorizSync may be a comma separated list of discrete values, or a\n"
+"# comma separated list of ranges of values.\n"
+"# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR\'S\n"
+"# USER MANUAL FOR THE CORRECT NUMBERS.\n"
+"\n";
+
+static char *monitorsection_text3 =
+"# HorizSync 30-64 # multisync\n"
+"# HorizSync 31.5, 35.2 # multiple fixed sync frequencies\n"
+"# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies\n"
+"\n"
+"# VertRefresh is in Hz unless units are specified.\n"
+"# VertRefresh may be a comma separated list of discrete values, or a\n"
+"# comma separated list of ranges of values.\n"
+"# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR\'S\n"
+"# USER MANUAL FOR THE CORRECT NUMBERS.\n"
+"\n";
+
+#if 0
+static char *monitorsection_text4 =
+"# Modes can be specified in two formats. A compact one-line format, or\n"
+"# a multi-line format.\n"
+"\n"
+"# These two are equivalent\n"
+"\n"
+"# ModeLine \"1024x768i\" 45 1024 1048 1208 1264 768 776 784 817 Interlace\n"
+"\n"
+"# Mode \"1024x768i\"\n"
+"# DotClock 45\n"
+"# HTimings 1024 1048 1208 1264\n"
+"# VTimings 768 776 784 817\n"
+"# Flags \"Interlace\"\n"
+"# EndMode\n"
+"\n";
+
+static char *modelines_text =
+"# This is a set of standard mode timings. Modes that are out of monitor spec\n"
+"# are automatically deleted by the server (provided the HorizSync and\n"
+"# VertRefresh lines are correct), so there's no immediate need to\n"
+"# delete mode timings (unless particular mode timings don't work on your\n"
+"# monitor). With these modes, the best standard mode that your monitor\n"
+"# and video card can support for a given resolution is automatically\n"
+"# used.\n"
+"\n"
+"# 640x400 @ 70 Hz, 31.5 kHz hsync\n"
+"Modeline \"640x400\" 25.175 640 664 760 800 400 409 411 450\n"
+"# 640x480 @ 60 Hz, 31.5 kHz hsync\n"
+"Modeline \"640x480\" 25.175 640 664 760 800 480 491 493 525\n"
+"# 800x600 @ 56 Hz, 35.15 kHz hsync\n"
+"ModeLine \"800x600\" 36 800 824 896 1024 600 601 603 625\n"
+"# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync\n"
+"Modeline \"1024x768\" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace\n"
+"\n"
+"# 640x400 @ 85 Hz, 37.86 kHz hsync\n"
+"Modeline \"640x400\" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync\n"
+"# 640x480 @ 72 Hz, 36.5 kHz hsync\n"
+"Modeline \"640x480\" 31.5 640 680 720 864 480 488 491 521\n"
+"# 640x480 @ 75 Hz, 37.50 kHz hsync\n"
+"ModeLine \"640x480\" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync\n"
+"# 800x600 @ 60 Hz, 37.8 kHz hsync\n"
+"Modeline \"800x600\" 40 800 840 968 1056 600 601 605 628 +hsync +vsync\n"
+"\n"
+"# 640x480 @ 85 Hz, 43.27 kHz hsync\n"
+"Modeline \"640x480\" 36 640 696 752 832 480 481 484 509 -HSync -VSync\n"
+"# 1152x864 @ 89 Hz interlaced, 44 kHz hsync\n"
+"ModeLine \"1152x864\" 65 1152 1168 1384 1480 864 865 875 985 Interlace\n"
+"\n"
+"# 800x600 @ 72 Hz, 48.0 kHz hsync\n"
+"Modeline \"800x600\" 50 800 856 976 1040 600 637 643 666 +hsync +vsync\n"
+"# 1024x768 @ 60 Hz, 48.4 kHz hsync\n"
+"Modeline \"1024x768\" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync\n"
+"\n"
+"# 640x480 @ 100 Hz, 53.01 kHz hsync\n"
+"Modeline \"640x480\" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync\n"
+"# 1152x864 @ 60 Hz, 53.5 kHz hsync\n"
+"Modeline \"1152x864\" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync\n"
+"# 800x600 @ 85 Hz, 55.84 kHz hsync\n"
+"Modeline \"800x600\" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync\n"
+"\n"
+"# 1024x768 @ 70 Hz, 56.5 kHz hsync\n"
+"Modeline \"1024x768\" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync\n"
+"# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync\n"
+"Modeline \"1280x1024\" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace\n"
+"\n"
+"# 800x600 @ 100 Hz, 64.02 kHz hsync\n"
+"Modeline \"800x600\" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync\n"
+"# 1024x768 @ 76 Hz, 62.5 kHz hsync\n"
+"Modeline \"1024x768\" 85 1024 1032 1152 1360 768 784 787 823\n"
+"# 1152x864 @ 70 Hz, 62.4 kHz hsync\n"
+"Modeline \"1152x864\" 92 1152 1208 1368 1474 864 865 875 895\n"
+"# 1280x1024 @ 61 Hz, 64.2 kHz hsync\n"
+"Modeline \"1280x1024\" 110 1280 1328 1512 1712 1024 1025 1028 1054\n"
+"\n"
+"# 1024x768 @ 85 Hz, 70.24 kHz hsync\n"
+"Modeline \"1024x768\" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync\n"
+"# 1152x864 @ 78 Hz, 70.8 kHz hsync\n"
+"Modeline \"1152x864\" 110 1152 1240 1324 1552 864 864 876 908\n"
+"\n"
+"# 1280x1024 @ 70 Hz, 74.59 kHz hsync\n"
+"Modeline \"1280x1024\" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync\n"
+"# 1600x1200 @ 60Hz, 75.00 kHz hsync\n"
+"Modeline \"1600x1200\" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync\n"
+"# 1152x864 @ 84 Hz, 76.0 kHz hsync\n"
+"Modeline \"1152x864\" 135 1152 1464 1592 1776 864 864 876 908\n"
+"\n"
+"# 1280x1024 @ 74 Hz, 78.85 kHz hsync\n"
+"Modeline \"1280x1024\" 135 1280 1312 1456 1712 1024 1027 1030 1064\n"
+"\n"
+"# 1024x768 @ 100Hz, 80.21 kHz hsync\n"
+"Modeline \"1024x768\" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync\n"
+"# 1280x1024 @ 76 Hz, 81.13 kHz hsync\n"
+"Modeline \"1280x1024\" 135 1280 1312 1416 1664 1024 1027 1030 1064\n"
+"\n"
+"# 1600x1200 @ 70 Hz, 87.50 kHz hsync\n"
+"Modeline \"1600x1200\" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync\n"
+"# 1152x864 @ 100 Hz, 89.62 kHz hsync\n"
+"Modeline \"1152x864\" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync\n"
+"# 1280x1024 @ 85 Hz, 91.15 kHz hsync\n"
+"Modeline \"1280x1024\" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync\n"
+"# 1600x1200 @ 75 Hz, 93.75 kHz hsync\n"
+"Modeline \"1600x1200\" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync\n"
+"# 1600x1200 @ 85 Hz, 105.77 kHz hsync\n"
+"Modeline \"1600x1200\" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync\n"
+"# 1280x1024 @ 100 Hz, 107.16 kHz hsync\n"
+"Modeline \"1280x1024\" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync\n"
+"\n"
+"# 1800x1440 @ 64Hz, 96.15 kHz hsync \n"
+"ModeLine \"1800X1440\" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync\n"
+"# 1800x1440 @ 70Hz, 104.52 kHz hsync \n"
+"ModeLine \"1800X1440\" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync\n"
+"\n"
+"# 512x384 @ 78 Hz, 31.50 kHz hsync\n"
+"Modeline \"512x384\" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync\n"
+"# 512x384 @ 85 Hz, 34.38 kHz hsync\n"
+"Modeline \"512x384\" 22 512 528 592 640 384 385 388 404 -HSync -VSync\n"
+"\n"
+#if XFREE86_VERSION >= 311
+"# Low-res Doublescan modes\n"
+"# If your chipset does not support doublescan, you get a 'squashed'\n"
+"# resolution like 320x400.\n"
+"\n"
+"# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio\n"
+"Modeline \"320x200\" 12.588 320 336 384 400 200 204 205 225 Doublescan\n"
+"# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio\n"
+"Modeline \"320x240\" 12.588 320 336 384 400 240 245 246 262 Doublescan\n"
+"# 320x240 @ 72 Hz, 36.5 kHz hsync\n"
+"Modeline \"320x240\" 15.750 320 336 384 400 240 244 246 262 Doublescan\n"
+"# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio\n"
+"ModeLine \"400x300\" 18 400 416 448 512 300 301 302 312 Doublescan\n"
+"# 400x300 @ 60 Hz, 37.8 kHz hsync\n"
+"Modeline \"400x300\" 20 400 416 480 528 300 301 303 314 Doublescan\n"
+"# 400x300 @ 72 Hz, 48.0 kHz hsync\n"
+"Modeline \"400x300\" 25 400 424 488 520 300 319 322 333 Doublescan\n"
+"# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio\n"
+"ModeLine \"480x300\" 21.656 480 496 536 616 300 301 302 312 Doublescan\n"
+"# 480x300 @ 60 Hz, 37.8 kHz hsync\n"
+"Modeline \"480x300\" 23.890 480 496 576 632 300 301 303 314 Doublescan\n"
+"# 480x300 @ 63 Hz, 39.6 kHz hsync\n"
+"Modeline \"480x300\" 25 480 496 576 632 300 301 303 314 Doublescan\n"
+"# 480x300 @ 72 Hz, 48.0 kHz hsync\n"
+"Modeline \"480x300\" 29.952 480 504 584 624 300 319 322 333 Doublescan\n"
+"\n"
+#endif
+;
+#endif
+
+static char *devicesection_text =
+"# **********************************************************************\n"
+"# Graphics device section\n"
+"# **********************************************************************\n"
+"\n"
+"# Any number of graphics device sections may be present\n"
+"\n"
+"# Standard VGA Device:\n"
+"\n"
+"Section \"Device\"\n"
+" Identifier \"Standard VGA\"\n"
+" VendorName \"Unknown\"\n"
+" BoardName \"Unknown\"\n"
+"\n"
+"# The chipset line is optional in most cases. It can be used to override\n"
+"# the driver's chipset detection, and should not normally be specified.\n"
+"\n"
+"# Chipset \"generic\"\n"
+"\n"
+"# The Driver line must be present. When using run-time loadable driver\n"
+"# modules, this line instructs the server to load the specified driver\n"
+"# module. Even when not using loadable driver modules, this line\n"
+"# indicates which driver should interpret the information in this section.\n"
+"\n"
+" Driver \"vga\"\n"
+"# The BusID line is used to specify which of possibly multiple devices\n"
+"# this section is intended for. When this line isn't present, a device\n"
+"# section can only match up with the primary video device. For PCI\n"
+"# devices a line like the following could be used. This line should not\n"
+"# normally be included unless there is more than one video device\n"
+"# intalled.\n"
+"\n"
+"# BusID \"PCI:0:10:0\"\n"
+"\n"
+"# VideoRam 256\n"
+"\n"
+"# Clocks 25.2 28.3\n"
+"\n"
+"EndSection\n"
+"\n"
+"# Device configured by xf86config:\n"
+"\n";
+
+static char *screensection_text1 =
+"# **********************************************************************\n"
+"# Screen sections\n"
+"# **********************************************************************\n"
+"\n"
+"# Any number of screen sections may be present. Each describes\n"
+"# the configuration of a single screen. A single specific screen section\n"
+"# may be specified from the X server command line with the \"-screen\"\n"
+"# option.\n";
+
+static char *serverlayout_section_text1 =
+"# **********************************************************************\n"
+"# ServerLayout sections.\n"
+"# **********************************************************************\n"
+"\n"
+"# Any number of ServerLayout sections may be present. Each describes\n"
+"# the way multiple screens are organised. A specific ServerLayout\n"
+"# section may be specified from the X server command line with the\n"
+"# \"-layout\" option. In the absence of this, the first section is used.\n"
+"# When now ServerLayout section is present, the first Screen section\n"
+"# is used alone.\n"
+"\n"
+"Section \"ServerLayout\"\n"
+"\n"
+"# The Identifier line must be present\n"
+" Identifier \"Simple Layout\"\n"
+"\n"
+"# Each Screen line specifies a Screen section name, and optionally\n"
+"# the relative position of other screens. The four names after\n"
+"# primary screen name are the screens to the top, bottom, left and right\n"
+"# of the primary screen. In this example, screen 2 is located to the\n"
+"# right of screen 1.\n"
+"\n";
+
+static char *serverlayout_section_text2 =
+"\n"
+"# Each InputDevice line specifies an InputDevice section name and\n"
+"# optionally some options to specify the way the device is to be\n"
+"# used. Those options include \"CorePointer\", \"CoreKeyboard\" and\n"
+"# \"SendCoreEvents\".\n"
+"\n"
+" InputDevice \"Mouse1\" \"CorePointer\"\n"
+" InputDevice \"Keyboard1\" \"CoreKeyboard\"\n"
+"\n"
+"EndSection\n"
+"\n"
+"# Section \"DRI\"\n"
+"# Mode 0666\n"
+"# EndSection\n"
+"\n";
+
+static void
+write_fontpath_section(FILE *f)
+{
+ /* this will create the Fontpath lines, but only after checking,
+ * that the corresponding dir exists (was THE absolute problem
+ * users had with XFree86/OS2 3.1.2D !)
+ */
+ int i;
+ char cur[256+20],*colon, *hash;
+
+ for (i=0; XF86Config_fontpaths[i]; i++) {
+ strcpy(cur,TREEROOTLX);
+ strcat(cur,XF86Config_fontpaths[i]);
+ /* remove a ':' */
+ colon = strchr(cur+2,':'); /* OS/2: C:/...:scaled */
+ if (colon) *colon = 0;
+ hash = exists_dir(cur) ? "" : "#";
+ fprintf(f,"%s FontPath \"%s%s\"\n",
+ hash,
+ TREEROOTLX,
+ XF86Config_fontpaths[i]);
+ }
+}
+
+static void
+write_XF86Config(char *filename)
+{
+ FILE *f;
+
+ /*
+ * Write the file.
+ */
+
+ f = fopen(filename, "w");
+ if (f == NULL) {
+ printf("Failed to open filename for writing.\n");
+#ifndef __EMX__
+ if (getuid() != 0)
+ printf("Maybe you need to be root to write to the specified directory?\n");
+#endif
+ exit(-1);
+ }
+
+ fprintf(f, "%s", XF86Config_firstchunk_text);
+ write_fontpath_section(f);
+ fprintf(f, "%s", XF86Config_fontpathchunk_text);
+
+ /*
+ * Write keyboard section.
+ */
+ if (config_altmeta) {
+ fprintf(f, " Option \"LeftAlt\" \"Meta\"\n");
+ fprintf(f, " Option \"RightAlt\" \"ModeShift\"\n");
+ }
+ else {
+ fprintf(f, "# Option \"LeftAlt\" \"Meta\"\n");
+ fprintf(f, "# Option \"RightAlt\" \"ModeShift\"\n");
+ }
+#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT)
+ /* wscons keyoards need a protocol line */
+ fprintf(f, " Option \"Protocol\" \"wskbd\"\n");
+ fprintf(f, " Option \"Device\" \"%s\"\n", config_keyboard_dev);
+ fprintf(f, " Option \"XkbKeycodes\" \"wscons(ppc)\"\n");
+#endif
+ fprintf(f, "%s", keyboardchunk2_text);
+
+ fprintf(f, "%s", keyboardchunk3_text);
+ if (config_xkbdisable) {
+ fprintf(f, " Option \"XkbDisable\"\n\n");
+ } else {
+ fprintf(f, "# Option \"XkbDisable\"\n\n");
+ }
+ fprintf(f, " Option \"XkbRules\" \"%s\"\n",
+ config_xkbrules);
+ fprintf(f, " Option \"XkbModel\" \"%s\"\n",
+ config_xkbmodel);
+ fprintf(f, " Option \"XkbLayout\" \"%s\"\n",
+ config_xkblayout);
+ if (config_xkbvariant)
+ fprintf(f, " Option \"XkbVariant\" \"%s\"\n",
+ config_xkbvariant);
+ if (config_xkboptions)
+ fprintf(f, " Option \"XkbOptions\" \"%s\"\n",
+ config_xkboptions);
+
+ fprintf(f, "%s",keyboardlastchunk_text);
+
+ /*
+ * Write pointer section.
+ */
+ fprintf(f, "%s", pointersection_text1);
+ fprintf(f, " Option \"Protocol\" \"%s\"\n",
+ mouse_info[config_mousetype].name);
+#if !defined(__UNIXOS2__) && !defined(QNX4)
+ fprintf(f, " Option \"Device\" \"%s\"\n", config_pointerdevice);
+#endif
+ fprintf(f, "%s", pointersection_text2);
+ if (!config_emulate3buttons)
+ fprintf(f, "#");
+ fprintf(f, " Option \"Emulate3Buttons\"\n");
+ fprintf(f, "# Option \"Emulate3Timeout\" \"50\"\n\n");
+ fprintf(f, "# ChordMiddle is an option for some 3-button Logitech mice\n\n");
+ if (!config_chordmiddle)
+ fprintf(f, "#");
+ fprintf(f, " Option \"ChordMiddle\"\n\n");
+ if (config_cleardtrrts) {
+ fprintf(f, " Option \"ClearDTR\"\n");
+ fprintf(f, " Option \"ClearRTS\"\n\n");
+ }
+ fprintf(f, "EndSection\n\n\n");
+
+ /*
+ * Write XInput sample section
+ */
+ fprintf(f, "%s", xinputsection_text);
+
+ /*
+ * Write monitor section.
+ */
+ fprintf(f, "%s", monitorsection_text1);
+ fprintf(f, " Identifier \"%s\"\n", config_monitoridentifier);
+ fprintf(f, "\n");
+ fprintf(f, "%s", monitorsection_text2);
+ fprintf(f, " HorizSync %s\n", config_hsyncrange);
+ fprintf(f, "\n");
+ fprintf(f, "%s", monitorsection_text3);
+ fprintf(f, " VertRefresh %s\n", config_vsyncrange);
+ fprintf(f, "\n");
+#if 0
+ fprintf(f, "%s", monitorsection_text4);
+ fprintf(f, "%s", modelines_text);
+#endif
+ fprintf(f, "EndSection\n\n\n");
+
+ /*
+ * Write Device section.
+ */
+
+ fprintf(f, "%s", devicesection_text);
+ fprintf(f, "Section \"Device\"\n");
+ fprintf(f, " Identifier \"%s\"\n", config_deviceidentifier);
+ if (card_selected != -1) {
+ fprintf(f, " Driver \"%s\"\n", card[card_selected].driver);
+ if (card[card_selected].flags & UNSUPPORTED) {
+ fprintf(f, " # unsupported card\n");
+ }
+ } else {
+ fprintf(f, " Driver \"vga\"\n"
+ " # unsupported card\n");
+ }
+ /* Rely on server to detect video memory. */
+ fprintf(f, " #VideoRam %d\n", config_videomemory);
+ if (card_selected != -1)
+ /* Add comment lines from card definition. */
+ fprintf(f, card[card_selected].lines);
+ if (config_ramdac != NULL)
+ fprintf(f, " Ramdac \"%s\"\n", config_ramdac);
+ if (card_selected != -1)
+ if (card[card_selected].dacspeed != NULL)
+ fprintf(f, " Dacspeed %s\n",
+ card[card_selected].dacspeed);
+ if (config_clockchip != NULL)
+ fprintf(f, " Clockchip \"%s\"\n", config_clockchip);
+ else
+ if (config_numberofclockslines == 0)
+ fprintf(f, " # Insert Clocks lines here if appropriate\n");
+ else {
+ int i;
+ for (i = 0; i < config_numberofclockslines; i++)
+ fprintf(f, " Clocks %s\n", config_clocksline[i]);
+ }
+ fprintf(f, "EndSection\n\n\n");
+
+ /*
+ * Write Screen sections.
+ */
+
+ fprintf(f, "%s", screensection_text1);
+
+ fprintf(f,
+ "Section \"Screen\"\n"
+ " Identifier \"Screen 1\"\n"
+ " Device \"%s\"\n"
+ " Monitor \"%s\"\n"
+ " DefaultDepth %s\n"
+ "\n"
+ " Subsection \"Display\"\n"
+ " Depth 8\n"
+ " Modes %s\n"
+ " ViewPort 0 0\n",
+ config_deviceidentifier,
+ config_monitoridentifier,
+ config_depth,
+ config_modesline8bpp);
+ if (config_virtual)
+ fprintf(f, " Virtual %d %d\n",
+ config_virtualx8bpp, config_virtualy8bpp);
+ fprintf(f,
+ " EndSubsection\n"
+ " Subsection \"Display\"\n"
+ " Depth 16\n"
+ " Modes %s\n"
+ " ViewPort 0 0\n",
+ config_modesline16bpp);
+ if (config_virtual)
+ fprintf(f, " Virtual %d %d\n",
+ config_virtualx16bpp, config_virtualy16bpp);
+ fprintf(f,
+ " EndSubsection\n"
+ " Subsection \"Display\"\n"
+ " Depth 24\n"
+ " Modes %s\n"
+ " ViewPort 0 0\n",
+ config_modesline24bpp);
+ if (config_virtual)
+ fprintf(f, " Virtual %d %d\n",
+ config_virtualx24bpp, config_virtualy24bpp);
+ fprintf(f,
+ " EndSubsection\n"
+ "EndSection\n"
+ "\n");
+
+ /*
+ * ServerLayout section
+ */
+
+ fprintf(f, serverlayout_section_text1);
+ /* replace with screen config */
+ fprintf(f, " Screen \"Screen 1\"\n");
+
+ fprintf(f, serverlayout_section_text2);
+
+ fclose(f);
+}
+
+static char *
+append_version(char *name)
+{
+#ifdef APPEND_VERSION_TO_CONFIG_NAME
+ char *ret = NULL;
+
+ if (XF86_VERSION_MAJOR > 9 || XF86_VERSION_MAJOR < 0)
+ return name;
+
+ ret = Malloc(strlen(name) + 2 + 1);
+ sprintf(ret, "%s-%d", name, XF86_VERSION_MAJOR);
+ free(name);
+ return ret;
+#else
+ return name;
+#endif
+}
+
+/*
+ * Ask where to write XF86Config to. Returns filename.
+ */
+
+static char *
+ask_XF86Config_location(void) {
+ char s[80];
+ char *filename = NULL;
+
+ printf(
+"I am going to write the XF86Config file now. Make sure you don't accidently\n"
+"overwrite a previously configured one.\n\n");
+
+#ifndef __EMX__
+ if (getuid() == 0) {
+#ifdef PREFER_XF86CONFIG_IN_ETC
+ filename = Strdup("/etc/X11/" XCONFIGFILE);
+ filename = append_version(filename);
+ printf("Shall I write it to %s? ", filename);
+ getstring(s);
+ printf("\n");
+ if (answerisyes(s))
+ return filename;
+#endif
+
+ if (filename)
+ free(filename);
+ filename = Strdup(TREEROOTCFG "/" XCONFIGFILE);
+ filename = append_version(filename);
+ printf("Please answer the following question with either 'y' or 'n'.\n");
+ printf("Shall I write it to the default location, %s? ", filename);
+ getstring(s);
+ printf("\n");
+ if (answerisyes(s))
+ return filename;
+
+#ifndef PREFER_XF86CONFIG_IN_ETC
+ if (filename)
+ free(filename);
+ filename = Strdup("/etc/X11/" XCONFIGFILE);
+ filename = append_version(filename);
+ printf("Shall I write it to %s? ", filename);
+ getstring(s);
+ printf("\n");
+ if (answerisyes(s))
+ return filename;
+#endif
+#else /* __EMX__ */
+ {
+ printf("Please answer the following question with either 'y' or 'n'.\n");
+ printf("Shall I write it to the default location, drive:/"__XSERVERNAME__"/lib/X11/XConfig? ");
+ getstring(s);
+ printf("\n");
+ if (answerisyes(s)) {
+ return __XOS2RedirRoot("/"__XSERVERNAME__"/lib/X11/XConfig",'/');
+ }
+#endif /* __EMX__ */
+ }
+
+ if (filename)
+ free(filename);
+ filename = Strdup(XCONFIGFILE);
+ filename = append_version(filename);
+ printf("Do you want it written to the current directory as '%s'? ", filename);
+ getstring(s);
+ printf("\n");
+ if (answerisyes(s)) {
+ return filename;
+ }
+
+ printf("Please give a filename to write to: ");
+ getstring(s);
+ printf("\n");
+ if (filename)
+ free(filename);
+ filename = Strdup(s);
+ return filename;
+}
+
+
+/*
+ * Check if an earlier version of XFree86 is installed; warn about proper
+ * search path order in that case.
+ */
+
+static char *notinstalled_text =
+"The directory " TREEROOT " does not exist. This probably means that you have\n"
+"not yet installed an X11R6-based version of "__XSERVERNAME__". Please install\n"
+"XFree86 3.1+ before running this program, following the instructions in\n"
+"the INSTALL or README that comes with the "__XSERVERNAME__" distribution for your OS.\n"
+"For a minimal installation it is sufficient to only install base binaries,\n"
+"libraries, configuration files and a server that you want to use.\n"
+"\n";
+
+#ifndef __UNIXOS2__
+static char *oldxfree86_text =
+"The directory '/usr/X386/bin' exists. You probably have an old version of\n"
+"__XSERVERNAME__ installed (XFree86 3.1 installs in '" TREEROOT "' instead of\n"
+"'/usr/X386').\n"
+"\n"
+"It is important that the directory '" TREEROOT "' is present in your\n"
+"search path, *before* any occurrence of '/usr/X386/bin'. If you have installed\n"
+"X program binaries that are not in the base __XSERVERNAME__ distribution in\n"
+"'/usr/X386/bin', you can keep the directory in your path as long as it is\n"
+"after '" TREEROOT "'.\n"
+"\n";
+
+static char *pathnote_text =
+"Note that the X binary directory in your path may be a symbolic link.\n"
+"In that case you could modify the symbolic link to point to the new binaries.\n"
+"Example: 'rm -f /usr/bin/X11; ln -s /usr/X11R6/bin /usr/bin/X11', if the\n"
+"link is '/usr/bin/X11'.\n"
+"\n"
+"Make sure the path is OK before continuing.\n";
+#endif
+
+static void
+path_check(void) {
+ char s[80];
+ int ok;
+
+ ok = exists_dir(TREEROOT);
+ if (!ok) {
+ printf("%s", notinstalled_text);
+ printf("Do you want to continue? ");
+ getstring(s);
+ if (!answerisyes(s))
+ exit(-1);
+ printf("\n");
+ }
+
+#ifndef __UNIXOS2__
+ ok = exists_dir("/usr/X386/bin");
+ if (!ok)
+ return;
+
+ printf("%s", oldxfree86_text);
+ printf("Your PATH is currently set as follows:\n%s\n\n",
+ getenv("PATH"));
+ printf("%s", pathnote_text);
+ keypress();
+#endif
+}
+
+
+static void
+configdir_check(void)
+{
+ /* /etc/X11 may not exist on some systems */
+ if (getuid() == 0) {
+ struct stat buf;
+ if (stat("/etc/X11", &buf) == -1 && errno == ENOENT)
+ mkdir("/etc/X11", 0777);
+ if (stat(TREEROOTCFG, &buf) == -1 && errno == ENOENT)
+ mkdir(TREEROOTCFG, 0777);
+ }
+}
+
+
+/*
+ * Program entry point.
+ */
+
+int
+main(int argc, char *argv[]) {
+
+ createtmpdir();
+
+ emptylines();
+
+ printf("%s", intro_text);
+
+ keypress();
+ emptylines();
+
+ path_check();
+
+ emptylines();
+
+ configdir_check();
+
+ emptylines();
+
+ mouse_configuration();
+
+ emptylines();
+
+ keyboard_configuration();
+
+ emptylines();
+
+ monitor_configuration();
+
+ emptylines();
+
+ carddb_configuration();
+
+ emptylines();
+
+ screen_configuration();
+
+ emptylines();
+
+ depth_configuration();
+
+ emptylines();
+
+ write_XF86Config(ask_XF86Config_location());
+
+ printf("%s", finalcomment_text);
+
+ exit(0);
+}
diff --git a/hw/xfree86/utils/xorgconfig/xorgconfig.man.pre b/hw/xfree86/utils/xorgconfig/xorgconfig.man.pre
new file mode 100644
index 000000000..63e55f349
--- /dev/null
+++ b/hw/xfree86/utils/xorgconfig/xorgconfig.man.pre
@@ -0,0 +1,22 @@
+.\" $XFree86: xc/programs/Xserver/hw/xfree86/xf86config/xorgconfig.man,v 1.5 2001/11/01 23:35:34 dawes Exp $
+.TH xorgconfig 1 __vendorversion__
+.SH NAME
+xorgconfig \- generate an __XCONFIGFILE__ file
+.SH SYNOPSIS
+.B xorgconfig
+.SH DESCRIPTION
+\fIxorgconfig\fP is an interactive program for generating an __XCONFIGFILE__ file
+for use with __XSERVERNAME__ X servers.
+.PP
+Note that the default name used by \fIxorgconfig\fP for the __XCONFIGFILE__ file
+is system-dependent. For instance, on some systems, __XCONFIGFILE__-4 is used,
+and on OS/2, XConfig is used.
+.SH FILES
+.TP
+.I __projectroot__/lib/X11/Cards
+Video cards database
+.SH "SEE ALSO"
+__XSERVERNAME__(1), __XCONFIGFILE__(__filemansuffix__), reconfig(1)
+.SH AUTHOR
+Harm Hanemaayer.
+.\" $TOG: xf86conf.man /main/9 1997/07/19 10:53:08 kaleb $
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 00:00:42 +0000