diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_fw.h')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_fw.h | 36 |
1 files changed, 33 insertions, 3 deletions
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 63a11fef5d1b..99fe49618d61 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -8,14 +8,17 @@ #define __QLA_FW_H #define MBS_CHECKSUM_ERROR 0x4010 +#define MBS_INVALID_PRODUCT_KEY 0x4020 /* * Firmware Options. */ #define FO1_ENABLE_PUREX BIT_10 #define FO1_DISABLE_LED_CTRL BIT_6 +#define FO1_ENABLE_8016 BIT_0 #define FO2_ENABLE_SEL_CLASS2 BIT_5 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14 +#define FO3_HOLD_STS_IOCB BIT_12 /* * Port Database structure definition for ISP 24xx. @@ -341,7 +344,9 @@ struct init_cb_24xx { * BIT 10 = Reserved * BIT 11 = Enable FC-SP Security * BIT 12 = FC Tape Enable - * BIT 13-31 = Reserved + * BIT 13 = Reserved + * BIT 14 = Enable Target PRLI Control + * BIT 15-31 = Reserved */ uint32_t firmware_options_2; @@ -363,7 +368,8 @@ struct init_cb_24xx { * BIT 13 = Data Rate bit 0 * BIT 14 = Data Rate bit 1 * BIT 15 = Data Rate bit 2 - * BIT 16-31 = Reserved + * BIT 16 = Enable 75 ohm Termination Select + * BIT 17-31 = Reserved */ uint32_t firmware_options_3; @@ -435,6 +441,7 @@ struct cmd_type_7 { #define TMF_LUN_RESET BIT_12 #define TMF_CLEAR_TASK_SET BIT_10 #define TMF_ABORT_TASK_SET BIT_9 +#define TMF_DSD_LIST_ENABLE BIT_2 #define TMF_READ_DATA BIT_1 #define TMF_WRITE_DATA BIT_0 @@ -589,7 +596,7 @@ struct els_entry_24xx { #define EST_SOFI3 (1 << 4) #define EST_SOFI2 (3 << 4) - uint32_t rx_xchg_address[2]; /* Receive exchange address. */ + uint32_t rx_xchg_address; /* Receive exchange address. */ uint16_t rx_dsd_count; uint8_t opcode; @@ -650,6 +657,7 @@ struct logio_entry_24xx { uint16_t control_flags; /* Control flags. */ /* Modifiers. */ +#define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */ #define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */ #define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */ #define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */ @@ -779,6 +787,15 @@ struct device_reg_24xx { #define FA_RISC_CODE_ADDR 0x20000 #define FA_RISC_CODE_SEGMENTS 2 +#define FA_FW_AREA_ADDR 0x40000 +#define FA_VPD_NVRAM_ADDR 0x48000 +#define FA_FEATURE_ADDR 0x4C000 +#define FA_FLASH_DESCR_ADDR 0x50000 +#define FA_HW_EVENT_ADDR 0x54000 +#define FA_BOOT_LOG_ADDR 0x58000 +#define FA_FW_DUMP0_ADDR 0x60000 +#define FA_FW_DUMP1_ADDR 0x70000 + uint32_t flash_data; /* Flash/NVRAM BIOS data. */ uint32_t ctrl_status; /* Control/Status. */ @@ -859,10 +876,13 @@ struct device_reg_24xx { #define HCCRX_CLR_RISC_INT 0xA0000000 uint32_t gpiod; /* GPIO Data register. */ + /* LED update mask. */ #define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18) /* Data update mask. */ #define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16) + /* Data update mask. */ +#define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) /* LED control mask. */ #define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2) /* LED bit values. Color names as @@ -877,6 +897,8 @@ struct device_reg_24xx { uint32_t gpioe; /* GPIO Enable register. */ /* Enable update mask. */ #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16) + /* Enable update mask. */ +#define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) /* Enable. */ #define GPEX_ENABLE (BIT_1|BIT_0) @@ -916,6 +938,14 @@ struct device_reg_24xx { uint16_t mailbox29; uint16_t mailbox30; uint16_t mailbox31; + + uint32_t iobase_window; + uint32_t unused_4[8]; /* Gap. */ + uint32_t iobase_q; + uint32_t unused_5[2]; /* Gap. */ + uint32_t iobase_select; + uint32_t unused_6[2]; /* Gap. */ + uint32_t iobase_sdata; }; /* MID Support ***************************************************************/ |