drm: add initial r300 3D support.

This adds initial r300 3D support to the radeon DRM.

From: Nicolai Haehnle, Vladimir Dergachev, and others.
Signed-off-by: David Airlie <airlied@linux.ie>

1 files changed, 801 insertions, 0 deletions

diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
new file mode 100644
index 000000000000..623f1f460cb5
--- /dev/null
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -0,0 +1,801 @@
+/* r300_cmdbuf.c -- Command buffer emission for R300 -*- linux-c -*-
+ *
+ * Copyright (C) The Weather Channel, Inc.  2002.
+ * Copyright (C) 2004 Nicolai Haehnle.
+ * All Rights Reserved.
+ *
+ * The Weather Channel (TM) funded Tungsten Graphics to develop the
+ * initial release of the Radeon 8500 driver under the XFree86 license.
+ * This notice must be preserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Nicolai Haehnle <prefect_@gmx.net>
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "radeon_drm.h"
+#include "radeon_drv.h"
+#include "r300_reg.h"
+
+
+#define R300_SIMULTANEOUS_CLIPRECTS		4
+
+/* Values for R300_RE_CLIPRECT_CNTL depending on the number of cliprects
+ */
+static const int r300_cliprect_cntl[4] = {
+	0xAAAA,
+	0xEEEE,
+	0xFEFE,
+	0xFFFE
+};
+
+
+/**
+ * Emit up to R300_SIMULTANEOUS_CLIPRECTS cliprects from the given command
+ * buffer, starting with index n.
+ */
+static int r300_emit_cliprects(drm_radeon_private_t* dev_priv,
+			       drm_radeon_cmd_buffer_t* cmdbuf,
+			       int n)
+{
+	drm_clip_rect_t box;
+	int nr;
+	int i;
+	RING_LOCALS;
+
+	nr = cmdbuf->nbox - n;
+	if (nr > R300_SIMULTANEOUS_CLIPRECTS)
+		nr = R300_SIMULTANEOUS_CLIPRECTS;
+
+	DRM_DEBUG("%i cliprects\n", nr);
+
+	if (nr) {
+		BEGIN_RING(6 + nr*2);
+		OUT_RING( CP_PACKET0( R300_RE_CLIPRECT_TL_0, nr*2 - 1 ) );
+
+		for(i = 0; i < nr; ++i) {
+			if (DRM_COPY_FROM_USER_UNCHECKED(&box, &cmdbuf->boxes[n+i], sizeof(box))) {
+				DRM_ERROR("copy cliprect faulted\n");
+				return DRM_ERR(EFAULT);
+			}
+
+			box.x1 = (box.x1 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
+			box.y1 = (box.y1 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
+			box.x2 = (box.x2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
+			box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
+
+			OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) |
+					(box.y1 << R300_CLIPRECT_Y_SHIFT));
+			OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) |
+					(box.y2 << R300_CLIPRECT_Y_SHIFT));
+		}
+
+		OUT_RING_REG( R300_RE_CLIPRECT_CNTL, r300_cliprect_cntl[nr-1] );
+
+		/* TODO/SECURITY: Force scissors to a safe value, otherwise the
+		* client might be able to trample over memory.
+		* The impact should be very limited, but I'd rather be safe than
+		* sorry.
+		*/
+		OUT_RING( CP_PACKET0( R300_RE_SCISSORS_TL, 1 ) );
+		OUT_RING( 0 );
+		OUT_RING( R300_SCISSORS_X_MASK | R300_SCISSORS_Y_MASK );
+		ADVANCE_RING();
+		} else {
+		/* Why we allow zero cliprect rendering:
+		 * There are some commands in a command buffer that must be submitted
+		 * even when there are no cliprects, e.g. DMA buffer discard
+		 * or state setting (though state setting could be avoided by
+		 * simulating a loss of context).
+		 *
+		 * Now since the cmdbuf interface is so chaotic right now (and is
+		 * bound to remain that way for a bit until things settle down),
+		 * it is basically impossible to filter out the commands that are
+		 * necessary and those that aren't.
+		 *
+		 * So I choose the safe way and don't do any filtering at all;
+		 * instead, I simply set up the engine so that all rendering
+		 * can't produce any fragments.
+		 */
+		BEGIN_RING(2);
+		OUT_RING_REG( R300_RE_CLIPRECT_CNTL, 0 );
+		ADVANCE_RING();
+		}
+
+	return 0;
+}
+
+u8  r300_reg_flags[0x10000>>2];
+
+
+void r300_init_reg_flags(void)
+{
+	int i;
+	memset(r300_reg_flags, 0, 0x10000>>2);
+	#define ADD_RANGE_MARK(reg, count,mark) \
+		for(i=((reg)>>2);i<((reg)>>2)+(count);i++)\
+			r300_reg_flags[i]|=(mark);
+	
+	#define MARK_SAFE		1
+	#define MARK_CHECK_OFFSET	2
+	
+	#define ADD_RANGE(reg, count)	ADD_RANGE_MARK(reg, count, MARK_SAFE)
+
+	/* these match cmducs() command in r300_driver/r300/r300_cmdbuf.c */
+	ADD_RANGE(R300_SE_VPORT_XSCALE, 6);
+	ADD_RANGE(0x2080, 1);
+	ADD_RANGE(R300_SE_VTE_CNTL, 2);
+	ADD_RANGE(0x2134, 2);
+	ADD_RANGE(0x2140, 1);
+	ADD_RANGE(R300_VAP_INPUT_CNTL_0, 2);
+	ADD_RANGE(0x21DC, 1);
+	ADD_RANGE(0x221C, 1);
+	ADD_RANGE(0x2220, 4);
+	ADD_RANGE(0x2288, 1);
+	ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2);
+	ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
+	ADD_RANGE(R300_GB_ENABLE, 1);
+	ADD_RANGE(R300_GB_MSPOS0, 5);
+	ADD_RANGE(R300_TX_ENABLE, 1);
+	ADD_RANGE(0x4200, 4);
+	ADD_RANGE(0x4214, 1);
+	ADD_RANGE(R300_RE_POINTSIZE, 1);
+	ADD_RANGE(0x4230, 3);
+	ADD_RANGE(R300_RE_LINE_CNT, 1);
+	ADD_RANGE(0x4238, 1);
+	ADD_RANGE(0x4260, 3);
+	ADD_RANGE(0x4274, 4);
+	ADD_RANGE(0x4288, 5);
+	ADD_RANGE(0x42A0, 1);
+	ADD_RANGE(R300_RE_ZBIAS_T_FACTOR, 4);
+	ADD_RANGE(0x42B4, 1);
+	ADD_RANGE(R300_RE_CULL_CNTL, 1);
+	ADD_RANGE(0x42C0, 2);
+	ADD_RANGE(R300_RS_CNTL_0, 2);
+	ADD_RANGE(R300_RS_INTERP_0, 8);
+	ADD_RANGE(R300_RS_ROUTE_0, 8);
+	ADD_RANGE(0x43A4, 2);
+	ADD_RANGE(0x43E8, 1);
+	ADD_RANGE(R300_PFS_CNTL_0, 3);
+	ADD_RANGE(R300_PFS_NODE_0, 4);
+	ADD_RANGE(R300_PFS_TEXI_0, 64);
+	ADD_RANGE(0x46A4, 5);
+	ADD_RANGE(R300_PFS_INSTR0_0, 64);
+	ADD_RANGE(R300_PFS_INSTR1_0, 64);
+	ADD_RANGE(R300_PFS_INSTR2_0, 64);
+	ADD_RANGE(R300_PFS_INSTR3_0, 64);
+	ADD_RANGE(0x4BC0, 1);
+	ADD_RANGE(0x4BC8, 3);
+	ADD_RANGE(R300_PP_ALPHA_TEST, 2);
+	ADD_RANGE(0x4BD8, 1);
+	ADD_RANGE(R300_PFS_PARAM_0_X, 64);
+	ADD_RANGE(0x4E00, 1);
+	ADD_RANGE(R300_RB3D_CBLEND, 2);
+	ADD_RANGE(R300_RB3D_COLORMASK, 1);
+	ADD_RANGE(0x4E10, 3);
+	ADD_RANGE_MARK(R300_RB3D_COLOROFFSET0, 1, MARK_CHECK_OFFSET); /* check offset */
+	ADD_RANGE(R300_RB3D_COLORPITCH0, 1);
+	ADD_RANGE(0x4E50, 9);
+	ADD_RANGE(0x4E88, 1);
+	ADD_RANGE(0x4EA0, 2);
+	ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3);
+	ADD_RANGE(0x4F10, 4);
+	ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */
+	ADD_RANGE(R300_RB3D_DEPTHPITCH, 1); 
+	ADD_RANGE(0x4F28, 1);
+	ADD_RANGE(0x4F30, 2);
+	ADD_RANGE(0x4F44, 1);
+	ADD_RANGE(0x4F54, 1);
+
+	ADD_RANGE(R300_TX_FILTER_0, 16);
+	ADD_RANGE(R300_TX_UNK1_0, 16);
+	ADD_RANGE(R300_TX_SIZE_0, 16);
+	ADD_RANGE(R300_TX_FORMAT_0, 16);
+		/* Texture offset is dangerous and needs more checking */
+	ADD_RANGE_MARK(R300_TX_OFFSET_0, 16, MARK_CHECK_OFFSET);
+	ADD_RANGE(R300_TX_UNK4_0, 16);
+	ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
+
+	/* Sporadic registers used as primitives are emitted */
+	ADD_RANGE(0x4f18, 1);
+	ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
+	ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
+	ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);
+
+}
+
+static __inline__ int r300_check_range(unsigned  reg, int count)
+{
+	int i;
+	if(reg & ~0xffff)return -1;
+	for(i=(reg>>2);i<(reg>>2)+count;i++)
+		if(r300_reg_flags[i]!=MARK_SAFE)return 1;
+	return 0;
+}
+
+  /* we expect offsets passed to the framebuffer to be either within video memory or
+      within AGP space */
+static __inline__ int r300_check_offset(drm_radeon_private_t* dev_priv, u32 offset)
+{
+	/* we realy want to check against end of video aperture
+		but this value is not being kept. 
+		This code is correct for now (does the same thing as the
+		code that sets MC_FB_LOCATION) in radeon_cp.c */
+	if((offset>=dev_priv->fb_location) && 
+		(offset<dev_priv->gart_vm_start))return 0;
+	if((offset>=dev_priv->gart_vm_start) &&
+		 (offset<dev_priv->gart_vm_start+dev_priv->gart_size))return 0;
+	return 1;
+}
+
+static __inline__ int r300_emit_carefully_checked_packet0(drm_radeon_private_t* dev_priv,
+						drm_radeon_cmd_buffer_t* cmdbuf,
+						drm_r300_cmd_header_t header)
+{
+	int reg;
+	int sz;
+	int i;
+	int values[64];
+	RING_LOCALS;
+
+	sz = header.packet0.count;
+	reg = (header.packet0.reghi << 8) | header.packet0.reglo;
+	
+	if((sz>64)||(sz<0)){
+		DRM_ERROR("Cannot emit more than 64 values at a time (reg=%04x sz=%d)\n", reg, sz);
+		return DRM_ERR(EINVAL);
+		}
+	for(i=0;i<sz;i++){
+		values[i]=((int __user*)cmdbuf->buf)[i];
+		switch(r300_reg_flags[(reg>>2)+i]){
+		case MARK_SAFE:
+			break;
+		case MARK_CHECK_OFFSET:
+			if(r300_check_offset(dev_priv, (u32)values[i])){
+				DRM_ERROR("Offset failed range check (reg=%04x sz=%d)\n", reg, sz);
+				return DRM_ERR(EINVAL);
+				}
+			break;
+		default:
+			DRM_ERROR("Register %04x failed check as flag=%02x\n", reg+i*4, r300_reg_flags[(reg>>2)+i]);
+			return DRM_ERR(EINVAL);
+			}
+		}
+		
+	BEGIN_RING(1+sz);
+	OUT_RING( CP_PACKET0( reg, sz-1 ) );
+	OUT_RING_TABLE( values, sz );
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz*4;
+	cmdbuf->bufsz -= sz*4;
+
+	return 0;
+}
+
+/**
+ * Emits a packet0 setting arbitrary registers.
+ * Called by r300_do_cp_cmdbuf.
+ *
+ * Note that checks are performed on contents and addresses of the registers
+ */
+static __inline__ int r300_emit_packet0(drm_radeon_private_t* dev_priv,
+						drm_radeon_cmd_buffer_t* cmdbuf,
+						drm_r300_cmd_header_t header)
+{
+	int reg;
+	int sz;
+	RING_LOCALS;
+
+	sz = header.packet0.count;
+	reg = (header.packet0.reghi << 8) | header.packet0.reglo;
+
+	if (!sz)
+		return 0;
+
+	if (sz*4 > cmdbuf->bufsz)
+		return DRM_ERR(EINVAL);
+		
+	if (reg+sz*4 >= 0x10000){
+		DRM_ERROR("No such registers in hardware reg=%04x sz=%d\n", reg, sz);
+		return DRM_ERR(EINVAL);
+		}
+
+	if(r300_check_range(reg, sz)){
+		/* go and check everything */
+		return r300_emit_carefully_checked_packet0(dev_priv, cmdbuf, header);
+		}
+	/* the rest of the data is safe to emit, whatever the values the user passed */
+
+	BEGIN_RING(1+sz);
+	OUT_RING( CP_PACKET0( reg, sz-1 ) );
+	OUT_RING_TABLE( (int __user*)cmdbuf->buf, sz );
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz*4;
+	cmdbuf->bufsz -= sz*4;
+
+	return 0;
+}
+
+
+/**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static __inline__ int r300_emit_vpu(drm_radeon_private_t* dev_priv,
+				    drm_radeon_cmd_buffer_t* cmdbuf,
+				    drm_r300_cmd_header_t header)
+{
+	int sz;
+	int addr;
+	RING_LOCALS;
+
+	sz = header.vpu.count;
+	addr = (header.vpu.adrhi << 8) | header.vpu.adrlo;
+
+	if (!sz)
+		return 0;
+	if (sz*16 > cmdbuf->bufsz)
+		return DRM_ERR(EINVAL);
+
+	BEGIN_RING(5+sz*4);
+	/* Wait for VAP to come to senses.. */
+	/* there is no need to emit it multiple times, (only once before VAP is programmed,
+	   but this optimization is for later */
+	OUT_RING_REG( R300_VAP_PVS_WAITIDLE, 0 );
+	OUT_RING_REG( R300_VAP_PVS_UPLOAD_ADDRESS, addr );
+	OUT_RING( CP_PACKET0_TABLE( R300_VAP_PVS_UPLOAD_DATA, sz*4 - 1 ) );
+	OUT_RING_TABLE( (int __user*)cmdbuf->buf, sz*4 );
+
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz*16;
+	cmdbuf->bufsz -= sz*16;
+
+	return 0;
+}
+
+
+/**
+ * Emit a clear packet from userspace.
+ * Called by r300_emit_packet3.
+ */
+static __inline__ int r300_emit_clear(drm_radeon_private_t* dev_priv,
+				      drm_radeon_cmd_buffer_t* cmdbuf)
+{
+	RING_LOCALS;
+
+	if (8*4 > cmdbuf->bufsz)
+		return DRM_ERR(EINVAL);
+
+	BEGIN_RING(10);
+	OUT_RING( CP_PACKET3( R200_3D_DRAW_IMMD_2, 8 ) );
+	OUT_RING( R300_PRIM_TYPE_POINT|R300_PRIM_WALK_RING|
+	          (1<<R300_PRIM_NUM_VERTICES_SHIFT) );
+	OUT_RING_TABLE( (int __user*)cmdbuf->buf, 8 );
+	ADVANCE_RING();
+
+	cmdbuf->buf += 8*4;
+	cmdbuf->bufsz -= 8*4;
+
+	return 0;
+}
+
+static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t* dev_priv,
+				      drm_radeon_cmd_buffer_t* cmdbuf,
+				      u32 header)
+{
+	int count, i,k;
+	#define MAX_ARRAY_PACKET  64
+	u32 payload[MAX_ARRAY_PACKET];
+	u32 narrays;
+	RING_LOCALS;
+
+	count=(header>>16) & 0x3fff;
+	
+	if((count+1)>MAX_ARRAY_PACKET){
+		DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n", count);
+		return DRM_ERR(EINVAL);
+		}
+	memset(payload, 0, MAX_ARRAY_PACKET*4);
+	memcpy(payload, cmdbuf->buf+4, (count+1)*4);	
+	
+	/* carefully check packet contents */
+	
+	narrays=payload[0];
+	k=0;
+	i=1;
+	while((k<narrays) && (i<(count+1))){
+		i++; /* skip attribute field */
+		if(r300_check_offset(dev_priv, payload[i])){
+			DRM_ERROR("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n", k, i);
+			return DRM_ERR(EINVAL);
+			}
+		k++;
+		i++;
+		if(k==narrays)break;
+		/* have one more to process, they come in pairs */
+		if(r300_check_offset(dev_priv, payload[i])){
+			DRM_ERROR("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n", k, i);
+			return DRM_ERR(EINVAL);
+			}
+		k++;
+		i++;			
+		}
+	/* do the counts match what we expect ? */
+	if((k!=narrays) || (i!=(count+1))){
+		DRM_ERROR("Malformed 3D_LOAD_VBPNTR packet (k=%d i=%d narrays=%d count+1=%d).\n", k, i, narrays, count+1);
+		return DRM_ERR(EINVAL);
+		}
+
+	/* all clear, output packet */
+
+	BEGIN_RING(count+2);
+	OUT_RING(header);
+	OUT_RING_TABLE(payload, count+1);
+	ADVANCE_RING();
+
+	cmdbuf->buf += (count+2)*4;
+	cmdbuf->bufsz -= (count+2)*4;
+
+	return 0;
+}
+
+static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t* dev_priv,
+				      drm_radeon_cmd_buffer_t* cmdbuf)
+{
+	u32 header;
+	int count;
+	RING_LOCALS;
+
+	if (4 > cmdbuf->bufsz)
+		return DRM_ERR(EINVAL);
+
+        /* Fixme !! This simply emits a packet without much checking.
+	   We need to be smarter. */
+
+	/* obtain first word - actual packet3 header */
+	header = *(u32 __user*)cmdbuf->buf;
+
+	/* Is it packet 3 ? */
+	if( (header>>30)!=0x3 ) {
+		DRM_ERROR("Not a packet3 header (0x%08x)\n", header);
+		return DRM_ERR(EINVAL);
+		}
+
+	count=(header>>16) & 0x3fff;
+
+	/* Check again now that we know how much data to expect */
+	if ((count+2)*4 > cmdbuf->bufsz){
+		DRM_ERROR("Expected packet3 of length %d but have only %d bytes left\n",
+			(count+2)*4, cmdbuf->bufsz);
+		return DRM_ERR(EINVAL);
+		}
+
+	/* Is it a packet type we know about ? */
+	switch(header & 0xff00){
+	case RADEON_3D_LOAD_VBPNTR: /* load vertex array pointers */
+		return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header);
+
+	case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */
+	case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */
+	case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */
+	case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
+	case RADEON_WAIT_FOR_IDLE:
+	case RADEON_CP_NOP:
+		/* these packets are safe */
+		break;
+	default:
+		DRM_ERROR("Unknown packet3 header (0x%08x)\n", header);
+		return DRM_ERR(EINVAL);
+		}
+
+
+	BEGIN_RING(count+2);
+	OUT_RING(header);
+	OUT_RING_TABLE( (int __user*)(cmdbuf->buf+4), count+1);
+	ADVANCE_RING();
+
+	cmdbuf->buf += (count+2)*4;
+	cmdbuf->bufsz -= (count+2)*4;
+
+	return 0;
+}
+
+
+/**
+ * Emit a rendering packet3 from userspace.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static __inline__ int r300_emit_packet3(drm_radeon_private_t* dev_priv,
+					drm_radeon_cmd_buffer_t* cmdbuf,
+					drm_r300_cmd_header_t header)
+{
+	int n;
+	int ret;
+	char __user* orig_buf = cmdbuf->buf;
+	int orig_bufsz = cmdbuf->bufsz;
+
+	/* This is a do-while-loop so that we run the interior at least once,
+	 * even if cmdbuf->nbox is 0. Compare r300_emit_cliprects for rationale.
+	 */
+	n = 0;
+	do {
+		if (cmdbuf->nbox > R300_SIMULTANEOUS_CLIPRECTS) {
+			ret = r300_emit_cliprects(dev_priv, cmdbuf, n);
+			if (ret)
+				return ret;
+
+			cmdbuf->buf = orig_buf;
+			cmdbuf->bufsz = orig_bufsz;
+			}
+
+		switch(header.packet3.packet) {
+		case R300_CMD_PACKET3_CLEAR:
+			DRM_DEBUG("R300_CMD_PACKET3_CLEAR\n");
+			ret = r300_emit_clear(dev_priv, cmdbuf);
+			if (ret) {
+				DRM_ERROR("r300_emit_clear failed\n");
+				return ret;
+				}
+			break;
+
+		case R300_CMD_PACKET3_RAW:
+			DRM_DEBUG("R300_CMD_PACKET3_RAW\n");
+			ret = r300_emit_raw_packet3(dev_priv, cmdbuf);
+			if (ret) {
+				DRM_ERROR("r300_emit_raw_packet3 failed\n");
+				return ret;
+				}
+			break;
+
+		default:
+			DRM_ERROR("bad packet3 type %i at %p\n",
+				header.packet3.packet,
+				cmdbuf->buf - sizeof(header));
+			return DRM_ERR(EINVAL);
+			}
+
+		n += R300_SIMULTANEOUS_CLIPRECTS;
+	} while(n < cmdbuf->nbox);
+
+	return 0;
+}
+
+/* Some of the R300 chips seem to be extremely touchy about the two registers
+ * that are configured in r300_pacify.
+ * Among the worst offenders seems to be the R300 ND (0x4E44): When userspace
+ * sends a command buffer that contains only state setting commands and a
+ * vertex program/parameter upload sequence, this will eventually lead to a
+ * lockup, unless the sequence is bracketed by calls to r300_pacify.
+ * So we should take great care to *always* call r300_pacify before
+ * *anything* 3D related, and again afterwards. This is what the
+ * call bracket in r300_do_cp_cmdbuf is for.
+ */
+
+/**
+ * Emit the sequence to pacify R300.
+ */
+static __inline__ void r300_pacify(drm_radeon_private_t* dev_priv)
+{
+	RING_LOCALS;
+
+	BEGIN_RING(6);
+	OUT_RING( CP_PACKET0( R300_RB3D_DSTCACHE_CTLSTAT, 0 ) );
+	OUT_RING( 0xa );
+	OUT_RING( CP_PACKET0( 0x4f18, 0 ) );
+	OUT_RING( 0x3 );
+	OUT_RING( CP_PACKET3( RADEON_CP_NOP, 0 ) );
+	OUT_RING( 0x0 );
+	ADVANCE_RING();
+}
+
+
+/**
+ * Called by r300_do_cp_cmdbuf to update the internal buffer age and state.
+ * The actual age emit is done by r300_do_cp_cmdbuf, which is why you must
+ * be careful about how this function is called.
+ */
+static void r300_discard_buffer(drm_device_t * dev, drm_buf_t * buf)
+{
+	drm_radeon_private_t *dev_priv = dev->dev_private;
+	drm_radeon_buf_priv_t *buf_priv = buf->dev_private;
+
+	buf_priv->age = ++dev_priv->sarea_priv->last_dispatch;
+	buf->pending = 1;
+	buf->used = 0;
+}
+
+
+/**
+ * Parses and validates a user-supplied command buffer and emits appropriate
+ * commands on the DMA ring buffer.
+ * Called by the ioctl handler function radeon_cp_cmdbuf.
+ */
+int r300_do_cp_cmdbuf(drm_device_t* dev,
+			  DRMFILE filp,
+		      drm_file_t* filp_priv,
+		      drm_radeon_cmd_buffer_t* cmdbuf)
+{
+	drm_radeon_private_t *dev_priv = dev->dev_private;
+        drm_device_dma_t *dma = dev->dma;
+        drm_buf_t *buf = NULL;
+	int emit_dispatch_age = 0;
+	int ret = 0;
+
+	DRM_DEBUG("\n");
+
+	/* See the comment above r300_emit_begin3d for why this call must be here,
+	 * and what the cleanup gotos are for. */
+	r300_pacify(dev_priv);
+
+	if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) {
+		ret = r300_emit_cliprects(dev_priv, cmdbuf, 0);
+		if (ret)
+			goto cleanup;
+		}
+
+	while(cmdbuf->bufsz >= sizeof(drm_r300_cmd_header_t)) {
+		int idx;
+		drm_r300_cmd_header_t header;
+
+		header.u = *(unsigned int *)cmdbuf->buf;
+
+		cmdbuf->buf += sizeof(header);
+		cmdbuf->bufsz -= sizeof(header);
+
+		switch(header.header.cmd_type) {
+		case R300_CMD_PACKET0: 
+			DRM_DEBUG("R300_CMD_PACKET0\n");
+			ret = r300_emit_packet0(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_packet0 failed\n");
+				goto cleanup;
+				}
+			break;
+
+		case R300_CMD_VPU:
+			DRM_DEBUG("R300_CMD_VPU\n");
+			ret = r300_emit_vpu(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_vpu failed\n");
+				goto cleanup;
+				}
+			break;
+
+		case R300_CMD_PACKET3:
+			DRM_DEBUG("R300_CMD_PACKET3\n");
+			ret = r300_emit_packet3(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_packet3 failed\n");
+				goto cleanup;
+				}
+			break;
+
+		case R300_CMD_END3D:
+			DRM_DEBUG("R300_CMD_END3D\n");
+			/* TODO: 
+				Ideally userspace driver should not need to issue this call, 
+				i.e. the drm driver should issue it automatically and prevent
+				lockups.
+				
+				In practice, we do not understand why this call is needed and what
+				it does (except for some vague guesses that it has to do with cache
+				coherence) and so the user space driver does it. 
+				
+				Once we are sure which uses prevent lockups the code could be moved
+				into the kernel and the userspace driver will not
+				need to use this command.
+
+				Note that issuing this command does not hurt anything
+				except, possibly, performance */
+			r300_pacify(dev_priv);
+			break;
+
+		case R300_CMD_CP_DELAY:
+			/* simple enough, we can do it here */
+			DRM_DEBUG("R300_CMD_CP_DELAY\n");
+			{
+				int i;
+				RING_LOCALS;
+
+				BEGIN_RING(header.delay.count);
+				for(i=0;i<header.delay.count;i++)
+					OUT_RING(RADEON_CP_PACKET2);
+				ADVANCE_RING();
+			}
+			break;
+
+		case R300_CMD_DMA_DISCARD:
+			DRM_DEBUG("RADEON_CMD_DMA_DISCARD\n");
+            		idx = header.dma.buf_idx;
+            		if (idx < 0 || idx >= dma->buf_count) {
+                		DRM_ERROR("buffer index %d (of %d max)\n",
+                      			idx, dma->buf_count - 1);
+				ret = DRM_ERR(EINVAL);
+                		goto cleanup;
+            			}
+
+	                buf = dma->buflist[idx];
+            		if (buf->filp != filp || buf->pending) {
+                		DRM_ERROR("bad buffer %p %p %d\n",
+                      		buf->filp, filp, buf->pending);
+                		ret = DRM_ERR(EINVAL);
+				goto cleanup;
+            			}
+
+			emit_dispatch_age = 1;
+			r300_discard_buffer(dev, buf);
+            		break;
+
+		case R300_CMD_WAIT:
+			/* simple enough, we can do it here */
+			DRM_DEBUG("R300_CMD_WAIT\n");
+			if(header.wait.flags==0)break; /* nothing to do */
+
+			{
+				RING_LOCALS;
+
+				BEGIN_RING(2);
+				OUT_RING( CP_PACKET0( RADEON_WAIT_UNTIL, 0 ) );
+				OUT_RING( (header.wait.flags & 0xf)<<14 );
+				ADVANCE_RING();
+			}
+			break;
+
+		default:
+			DRM_ERROR("bad cmd_type %i at %p\n",
+			          header.header.cmd_type,
+				  cmdbuf->buf - sizeof(header));
+			ret = DRM_ERR(EINVAL);
+			goto cleanup;
+			}
+	}
+
+	DRM_DEBUG("END\n");
+
+cleanup:
+	r300_pacify(dev_priv);
+
+	/* We emit the vertex buffer age here, outside the pacifier "brackets"
+	 * for two reasons:
+	 *  (1) This may coalesce multiple age emissions into a single one and
+	 *  (2) more importantly, some chips lock up hard when scratch registers
+	 *      are written inside the pacifier bracket.
+	 */
+	if (emit_dispatch_age) {
+		RING_LOCALS;
+
+		/* Emit the vertex buffer age */
+		BEGIN_RING(2);
+		RADEON_DISPATCH_AGE(dev_priv->sarea_priv->last_dispatch);
+		ADVANCE_RING();
+		}
+
+	COMMIT_RING();
+
+	return ret;
+}
+