path: root/man/pulse-cli-syntax.5.xml.in

<?xml version="1.0"?><!--*-nxml-*-->
<!DOCTYPE manpage SYSTEM "xmltoman.dtd">
<?xml-stylesheet type="text/xsl" href="xmltoman.xsl" ?>

<!--
This file is part of PulseAudio.

PulseAudio is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as
published by the Free Software Foundation; either version 2.1 of the
License, or (at your option) any later version.

PulseAudio is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
Public License for more details.

You should have received a copy of the GNU Lesser General Public
License along with PulseAudio; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
USA.
-->

<manpage name="pulse-cli-syntax" section="5" desc="PulseAudio Command Line Interface Syntax">

  <synopsis>
    <p><file>~/.pulse/default.pa</file></p>
    <p><file>@PA_DEFAULT_CONFIG_DIR@/default.pa</file></p>
    <p><file>@PA_DEFAULT_CONFIG_DIR@/system.pa</file></p>
  </synopsis>

  <description>
    <p>
      PulseAudio provides a simple command line language used by configuration
      scripts and the pacmd interactive shell, and the modules module-cli and
      module-cli-protocol-{unix,tcp}. Empty lines and lines beginning with a
      hashmark (#) are silently ignored. Several commands are supported.
    </p>

    <p>
      Note that any boolean arguments can be given positively as '1', 'on' or any
      word starting with the letters 't' or 'y'. Likewise, negative values can be
      given as '0', 'off' or any word starting with the letters 'f' or 'n'.
      Case is ignored.
    </p>
  </description>

  <section name="General Commands">

    <option>
      <p><opt>help</opt></p>
      <optdesc><p>Show a quick help on the commands available.</p></optdesc>
    </option>
  </section>

  <section name="Status_Commands">
    <option>
      <p><opt>list-modules</opt></p>
      <optdesc><p>Show all currently loaded modules with their arguments.</p></optdesc>
    </option>

    <option>
      <p><opt>list-cards</opt></p>
      <optdesc><p>Show all currently registered cards</p></optdesc>
    </option>

    <option>
      <p><opt>list-sinks</opt> or <opt>list-sources</opt></p>
      <optdesc><p>Show all currently registered sinks (resp. sources).</p></optdesc>
    </option>

    <option>
      <p><opt>list-clients</opt></p>
      <optdesc><p>Show all currently active clients.</p></optdesc>
    </option>

    <option>
      <p><opt>list-sink-inputs</opt> or <opt>list-source-outputs</opt></p>
      <optdesc><p>Show all currently active inputs to sinks a.k.a. playback
      streams (resp. outputs of sources a.k.a. recording streams).</p></optdesc>
    </option>

    <option>
      <p><opt>stat</opt></p>
      <optdesc><p>Show some simple statistics about the allocated memory blocks and the space used by them.</p></optdesc>
    </option>

    <option>
      <p><opt>info</opt> or <opt>ls</opt> or <opt>list</opt></p>
      <optdesc><p>A combination of all status commands described above (all
      three commands are synonyms).</p></optdesc>
    </option>
  </section>

  <section name="Module Management">
    <option>
      <p><opt>load-module</opt> <arg>name</arg> [<arg>arguments...</arg>]</p>
      <optdesc><p>Load a module specified by its name and arguments. For most
      modules it is OK to be loaded more than once.</p></optdesc>
    </option>

    <option>
      <p><opt>unload-module</opt> <arg>index</arg></p>
      <optdesc><p>Unload a module specified by its index in the module list as
      returned by list-modules.</p></optdesc>
    </option>

    <option>
      <p><opt>describe-module</opt> <arg>name</arg></p>
      <optdesc><p>Give information about a module specified by its name.</p></optdesc>
    </option>
  </section>

  <section name="Volume Commands">
    <option>
      <p><opt>set-sink-volume|set-source-volume</opt> <arg>index|name</arg> <arg>volume</arg></p>
      <optdesc><p>Set the volume of the specified sink (resp. source). You may
      specify the sink (resp. source) either by its index in the sink/source list
      or by its name. The volume should be an integer value greater or equal than
      0 (muted). Volume 65536 (0x10000) is 'normal' volume a.k.a. 100%. Values
      greater than this amplify the audio signal (with clipping).</p></optdesc>
    </option>

    <option>
      <p><opt>set-sink-mute|set-source-mute</opt> <arg>index|name</arg> <arg>boolean</arg></p>
      <optdesc><p>Mute or unmute the specified sink (resp. source). You may
      specify the sink (resp. source) either by its index or by its name.
      The mute value is either 0 (not muted) or 1 (muted).</p></optdesc>
    </option>

    <option>
      <p><opt>set-sink-input-volume|set-source-output-volume</opt> <arg>index</arg> <arg>volume</arg></p>
      <optdesc><p>Set the volume of a sink input (resp. source output) specified
      by its index. The same volume rules apply as with set-sink-volume.</p></optdesc>
    </option>

    <option>
      <p><opt>set-sink-input-mute|set-source-output-mute</opt> <arg>index</arg> <arg>boolean</arg></p>
      <optdesc><p>Mute or unmute a sink input (resp. source output) specified
      by its index. The same mute rules apply as with set-sink-mute.</p></optdesc>
    </option>
  </section>

  <section name="Configuration Commands">
    <option>
      <p><opt>set-default-sink|set-default-source</opt> <arg>index|name</arg></p>
      <optdesc><p>Make a sink (resp. source) the default. You may specify the
      sink (resp. source) by its index in the sink (resp. source) list or by its
      name.</p><p>Note that defaults may be overridden by various policy modules
      or by specific stream configurations.</p></optdesc>
    </option>

    <option>
      <p><opt>set-card-profile</opt> <arg>index|name</arg> <arg>profile-name</arg></p>
      <optdesc><p>Change the profile of a card.</p></optdesc>
    </option>

    <option>
      <p><opt>set-sink-port|set-source-port</opt> <arg>index|name</arg> <arg>port-name</arg></p>
      <optdesc><p>Change the profile of a sink (resp. source).</p></optdesc>
    </option>

    <option>
      <p><opt>suspend-sink|suspend-source</opt> <arg>index|name</arg> <arg>boolean</arg></p>
      <optdesc><p>Suspend (i.e. disconnect from the underlying hardware) a sink
      (resp. source).</p></optdesc>
    </option>

    <option>
      <p><opt>suspend</opt> <arg>boolean</arg></p>
      <optdesc><p>Suspend all sinks and sources.</p></optdesc>
    </option>
  </section>

  <section name="Moving streams">
    <option>
      <p><opt>move-sink-input|move-source-output</opt> <arg>index</arg> <arg>sink-index|sink-name</arg></p>
      <optdesc><p>Move sink input (resp. source output) to another sink
      (resp. source).</p></optdesc>
    </option>
  </section>

  <section name="Property lists">
    <option>
      <p><opt>update-sink-proplist|update-source-proplist</opt> <arg>index|name</arg> <arg>properties</arg></p>
      <optdesc><p>Update the properties of a sink (resp. source) specified by
      name or index. The property is specified as e.g. device.description="My
      Preferred Name"</p></optdesc>
    </option>

    <option>
      <p><opt>update-sink-input-proplist|update-source-output-proplist</opt> <arg>index</arg> <arg>properties</arg></p>
      <optdesc><p>Update the properties of a sink input (resp. source output)
      specified by index. The properties are specified as above.</p></optdesc>
    </option>
  </section>

  <section name="Sample Cache">
    <option>
      <p><opt>list-samples</opt></p>
      <optdesc><p>Lists the contents of the sample cache.</p></optdesc>
    </option>

    <option>
      <p><opt>play-sample</opt> <arg>name</arg> <arg>sink-index|sink-name</arg></p>
      <optdesc><p>Play a sample cache entry to a sink.</p></optdesc>
    </option>

    <option>
      <p><opt>remove-sample</opt> <arg>name</arg></p>
      <optdesc><p>Remove an entry from the sample cache.</p></optdesc>
    </option>

    <option>
      <p><opt>load-sample</opt> <arg>name</arg> <arg>filename</arg></p>
      <optdesc><p>Load an audio file to the sample cache.</p></optdesc>
    </option>

    <option>
      <p><opt>load-sample-lazy</opt> <arg>name</arg> <arg>filename</arg></p>
      <optdesc><p>Create a new entry in the sample cache, but don't load the
      sample immediately. The sample is loaded only when it is first used.
      After a certain idle time it is freed again.</p></optdesc>
    </option>

    <option>
      <p><opt>load-sample-dir-lazy</opt> <arg>path</arg></p>
      <optdesc><p>Load all entries in the specified directory into the sample
      cache as lazy entries. A shell globbing expression (e.g. *.wav) may be
      appended to the path of the directory to add.</p></optdesc>
    </option>
  </section>

  <section name="Killing Clients/Streams">
    <option>
      <p><opt>kill-client</opt> <arg>index</arg></p>
      <optdesc><p>Remove a client forcibly from the server. There is no protection
      against the client reconnecting immediately.</p></optdesc>
    </option>

    <option>
      <p><opt>kill-sink-input|kill-source-output</opt> <arg>index</arg></p>
      <optdesc><p>Remove a sink input (resp. source output) forcibly from the
      server. This will not remove the owning client or any other streams opened
      by the same client from the server.</p></optdesc>
    </option>
  </section>

  <section name="Log Commands">
    <option>
      <p><opt>set-log-level</opt> <arg>numeric-level</arg></p>
      <optdesc><p>Change the log level.</p></optdesc>
    </option>

    <option>
      <p><opt>set-log-meta</opt> <arg>boolean</arg></p>
      <optdesc><p>Show source code location in log messages.</p></optdesc>
    </option>

    <option>
      <p><opt>set-log-time</opt> <arg>boolean</arg></p>
      <optdesc><p>Show timestamps in log messages.</p></optdesc>
    </option>

    <option>
      <p><opt>set-log-backtrace</opt> <arg>num-frames</arg></p>
      <optdesc><p>Show backtrace in log messages.</p></optdesc>
    </option>
  </section>

  <section name="Miscellaneous Commands">
    <option>
      <p><opt>play-file</opt> <arg>filename</arg> <arg>sink-index|sink-name</arg></p>
      <optdesc><p>Play an audio file to a sink.</p></optdesc>
    </option>

    <option>
      <p><opt>dump</opt></p>
      <optdesc><p>Dump the daemon's current configuration in CLI commands.</p></optdesc>
    </option>

    <option>
      <p><opt>dump-volumes</opt></p>
      <optdesc><p>Debug: Shows the current state of all volumes.</p></optdesc>
    </option>

    <option>
      <p><opt>shared</opt></p>
      <optdesc><p>Debug: Show shared properties.</p></optdesc>
    </option>

    <option>
      <p><opt>exit</opt></p>
      <optdesc><p>Terminate the daemon. If you want to terminate a CLI
      connection ("log out") you might want to use ctrl+d</p></optdesc>
    </option>
  </section>

  <section name="Meta Commands">
    <p>
      In addition the the commands described above there a few meta directives
      supported by the command line interpreter.
    </p>
    <option>
      <p><opt>.include</opt> <arg>filename|folder</arg></p>
      <optdesc><p>Executes the commands from the specified script file or in all
      of the *.pa file within the folder.</p></optdesc>
    </option>
    <option>
      <p><opt>.fail</opt> and <opt>.nofail</opt></p>
      <optdesc><p>Enable (resp. disable) that following failing commands will
      cancel the execution of the current script file. This is a ignored when
      used on the interactive command line.</p></optdesc>
    </option>

    <option>
      <p><opt>.verbose</opt> and <opt>.noverbose</opt></p>
      <optdesc><p>Enable (resp. disable) extra verbosity.</p></optdesc>
    </option>
  </section>

  <section name="Authors">
    <p>The PulseAudio Developers &lt;@PACKAGE_BUGREPORT@&gt;;
    PulseAudio is available from <url href="@PACKAGE_URL@"/></p>
  </section>

  <section name="See also">
    <p>
      <manref name="default.pa" section="5"/>,
      <manref name="pacmd" section="1"/>,
      <manref name="pulseaudio" section="1"/>
    </p>
  </section>

</manpage>