Added section numbers to xrefs to other pages

9 files changed, 36 insertions, 36 deletions

diff --git a/man4/console_ioctl.4 b/man4/console_ioctl.4
index 7dd4ac46..33cf4dd1 100644
--- a/man4/console_ioctl.4
+++ b/man4/console_ioctl.4
@@ -29,7 +29,7 @@
 .SH NAME
 console ioctl \- ioctl's for console terminal and virtual consoles
 .SH DESCRIPTION
-The following Linux-specific \fBioctl\fP() requests are supported.
+The following Linux-specific \fBioctl\fP(2) requests are supported.
 Each requires a third argument, assumed here to be \fIargp\fP.
 .IP \fBKDGETLED\fP
 Get state of LEDs.  \fIargp\fP points to a long int.
diff --git a/man4/dsp56k.4 b/man4/dsp56k.4
index 754bef70..1a7ea380 100644
--- a/man4/dsp56k.4
+++ b/man4/dsp56k.4
@@ -49,10 +49,10 @@ to send and receive data using the bi-directional handshaked host
 port.
 .PP
 To send a data stream to the signal processor, use
-.BR write ()
+.BR write (2)
 to the
 device, and
-.BR read ()
+.BR read (2)
 to receive processed data.
 The data can be sent or
 received in 8, 16, 24, or 32-bit quantities on the host side, but will
@@ -65,7 +65,7 @@ calls are used to control the
 .IP \fBDSP56K_UPLOAD\fP
 resets the DSP56001 and uploads a program.
 The third
-.BR ioctl ()
+.BR ioctl (2)
 argument must be a pointer to a \fBstruct dsp56k_binary\fP with members
 \fBbin\fP pointing to a DSP56001 binary program, and \fBlen\fP set to
 the length of the program, counted in 24-bit words.
@@ -93,7 +93,7 @@ Bits 0 and 1 can be written by the host, and bits 2 and
 3 can be written by the DSP56001.
 
 To access the host flags, the third
-.BR ioctl ()
+.BR ioctl (2)
 argument must be a pointer
 to a \fBstruct dsp56k_host_flags\fP.
 If bit 0 or 1 is set in the
diff --git a/man4/lp.4 b/man4/lp.4
index 433f3048..4bf84cd3 100644
--- a/man4/lp.4
+++ b/man4/lp.4
@@ -83,7 +83,7 @@ For that reason, the default value is 0.
 This is used for both the polling and the interrupt driver.
 .IP "\fBint ioctl(int \fP\fIfd\fP\fB, LPSETIRQ, int \fP\fIarg\fP\fB)\fP"
 This
-.BR ioctl ()
+.BR ioctl (2)
 requires superuser privileges.
 It takes an int containing the new IRQ as argument.
 As a side effect, the printer will be reset.
diff --git a/man4/random.4 b/man4/random.4
index 116aa1e5..80f549fe 100644
--- a/man4/random.4
+++ b/man4/random.4
@@ -124,9 +124,9 @@ The file
 .I write_wakeup_threshold
 contains the number of bits of entropy below which we wake up
 processes that do a
-.BR select ()
+.BR select (2)
 or
-.BR poll ()
+.BR poll (2)
 for write access to
 .IR /dev/random .
 These values can be changed by writing to the files.
diff --git a/man4/rtc.4 b/man4/rtc.4
index fcc70e0c..e0e17b73 100644
--- a/man4/rtc.4
+++ b/man4/rtc.4
@@ -116,7 +116,7 @@ the types of interrupt that occurred,
 while the remaining 3 bytes contain the number of interrupts since the
 last
 .BR read (2).
-.SS ioctl() interface
+.SS ioctl(2) interface
 The following
 .BR ioctl (2)
 requests are defined on file descriptors connected to RTC devices:
@@ -147,14 +147,14 @@ The fields in this structure have the same meaning and ranges as for the
 structure described in
 .BR gmtime (3).
 A pointer to this structure should be passed as the third
-.BR ioctl ()
+.BR ioctl (2)
 argument.
 .TP
 .B RTC_SET_TIME
 Sets this RTC's time to the time specified by the
 .I rtc_time
 structure pointed to by the third
-.BR ioctl ()
+.BR ioctl (2)
 argument.
 To set the
 RTC's time the process must be privileged (i.e., have the
@@ -166,7 +166,7 @@ Read and set the alarm time, for RTCs that support alarms.
 The alarm interrupt must be separately enabled or disabled using the
 .BR RTC_AIE_ON ", " RTC_AIE_OFF
 requests.
-The third \fBioctl\fP() argument is a pointer to an
+The third \fBioctl\fP(2) argument is a pointer to an
 .I rtc_time
 structure.
 Only the
@@ -182,7 +182,7 @@ for RTCs that support periodic interrupts.
 The periodic interrupt must be separately enabled or disabled using the
 .BR RTC_PIE_ON ", " RTC_PIE_OFF
 requests.
-The third \fBioctl\fP() argument is a
+The third \fBioctl\fP(2) argument is a
 .I "unsigned long\ *"
 or a
 .IR "unsigned long" ,
@@ -198,17 +198,17 @@ capability) can set frequencies above the value specified in
 .TP
 .BR RTC_AIE_ON ", " RTC_AIE_OFF
 Enable or disable the alarm interrupt, for RTCs that support alarms.
-The third \fBioctl\fP() argument is ignored.
+The third \fBioctl\fP(2) argument is ignored.
 .TP
 .BR RTC_UIE_ON ", " RTC_UIE_OFF
 Enable or disable the interrupt on every clock update,
 for RTCs that support this once-per-second interrupt.
-The third \fBioctl\fP() argument is ignored.
+The third \fBioctl\fP(2) argument is ignored.
 .TP
 .BR RTC_PIE_ON ", " RTC_PIE_OFF
 Enable or disable the periodic interrupt,
 for RTCs that support these periodic interrupts.
-The third \fBioctl\fP() argument is ignored.
+The third \fBioctl\fP(2) argument is ignored.
 Only a privileged process (i.e., one having the
 .B CAP_SYS_RESOURCE
 capability) can enable the periodic interrupt if the frequency is
@@ -227,7 +227,7 @@ an RTC register for the year.
 With some RTCs,
 these operations can be used to read or to set the RTC's Epoch,
 respectively.
-The third \fBioctl\fP() argument is a
+The third \fBioctl\fP(2) argument is a
 .I "unsigned long\ *"
 or a
 .IR "unsigned long" ,
@@ -276,7 +276,7 @@ and
 .IR tm_year
 fields are also valid.
 A pointer to this structure should be passed as the third
-.BR ioctl ()
+.BR ioctl (2)
 argument.
 .SH FILES
 .IR /dev/rtc ", "
diff --git a/man4/sd.4 b/man4/sd.4
index 6f78ff2b..da26cc76 100644
--- a/man4/sd.4
+++ b/man4/sd.4
@@ -123,9 +123,9 @@ The
 .BR ioctl (2)
 operations are also supported.
 If the
-.BR ioctl ()
+.BR ioctl (2)
 parameter is required, and it is NULL, then
-.BR ioctl ()
+.BR ioctl (2)
 will return \-EINVAL.
 .SH FILES
 /dev/sd[a\-h]: the whole device
diff --git a/man4/st.4 b/man4/st.4
index a33931df..df911b02 100644
--- a/man4/st.4
+++ b/man4/st.4
@@ -123,7 +123,7 @@ For example, if the drive firmware selects fixed-block mode,
 the tape device uses fixed-block mode.
 The options can
 be changed with explicit
-.BR ioctl ()
+.BR ioctl (2)
 calls and remain in effect when the device is closed and reopened.
 Setting the options affects both the auto-rewind and the non-rewind
 device.
@@ -145,19 +145,19 @@ have nothing to do with disk partitions.
 A partitioned tape can be
 seen as several logical tapes within one medium.)
 Partition support has to be enabled with an
-.BR ioctl ().
+.BR ioctl (2).
 The tape
 location is preserved within each partition across partition changes.
 The partition used for subsequent tape operations is
 selected with an
-.BR ioctl ().
+.BR ioctl (2).
 The partition switch is executed together with
 the next tape operation in order to avoid unnecessary tape
 movement.
 The maximum number of partitions on a tape is defined by a
 compile-time constant (originally four).
 The driver contains an
-.BR ioctl ()
+.BR ioctl (2)
 that can format a tape with either one or two partitions.
 .PP
 Device
@@ -225,7 +225,7 @@ read calls.
 The third read returns an error.
 .SH IOCTLS
 The driver supports three
-.BR ioctl ()
+.BR ioctl (2)
 requests.
 Requests not recognized by the
 .B st
@@ -666,7 +666,7 @@ writing on the current medium type.
 .HP
 \s-1GMT_ONLINE(\s+1\fIx\fP\s-1)\s+1:
 The last
-.BR open ()
+.BR open (2)
 found the drive with a tape in place and ready for operation.
 .HP
 \s-1GMT_D_6250(\s+1\fIx\fP\s-1)\s+1, \s-1GMT_D_1600(\s+1\fIx\fP\s-1)\s+1, \s-1GMT_D_800(\s+1\fIx\fP\s-1)\s+1:
@@ -734,14 +734,14 @@ A write operation could not be completed because the tape reached
 end-of-medium.
 .IP ENOMEM
 The byte count in
-.BR read ()
+.BR read (2)
 is smaller than the next physical block on the tape.
 (Before 2.2.18 and 2.4.0-test6 the extra bytes have been
 silently ignored.)
 .IP EACCES
 An attempt was made to write or erase a write-protected tape.
 (This error is not detected during
-.BR open ().)
+.BR open (2).)
 .IP EFAULT
 The command parameters point to memory not belonging to the calling
 process.
@@ -755,11 +755,11 @@ An attempt was made to read or write a variable-length block that is
 larger than the driver's internal buffer.
 .IP EINVAL
 An
-.BR ioctl ()
+.BR ioctl (2)
 had an illegal argument, or a requested block size was illegal.
 .IP ENOSYS
 Unknown
-.BR ioctl ().
+.BR ioctl (2).
 .IP EROFS
 Open is attempted with O_WRONLY or O_RDWR when the tape in the drive is
 write-protected.
@@ -815,9 +815,9 @@ if verbose SCSI messages are enabled in kernel configuration.
 .PP
 5. The driver's internal buffering allows good throughput in fixed-block
 mode also with small
-.BR read ()
+.BR read (2)
 and
-.BR write ()
+.BR write (2)
 byte counts.
 With direct transfers
 this is not possible and may cause a surprise when moving to the 2.6
diff --git a/man4/tty.4 b/man4/tty.4
index ba1c14f4..d9fdece1 100644
--- a/man4/tty.4
+++ b/man4/tty.4
@@ -31,8 +31,8 @@ The file \fI/dev/tty\fP is a character file with major number 5 and
 minor number 0, usually of mode 0666 and owner.group root.tty.
 It is a synonym for the controlling terminal of a process, if any.
 .LP
-In addition to the \fBioctl\fP() requests supported by the device that
-\fBtty\fP refers to, the \fBioctl\fP() request \fBTIOCNOTTY\fP is supported.
+In addition to the \fBioctl\fP(2) requests supported by the device that
+\fBtty\fP refers to, the \fBioctl\fP(2) request \fBTIOCNOTTY\fP is supported.
 .SS TIOCNOTTY
 Detach the current process from its controlling terminal.
 .sp
@@ -40,7 +40,7 @@ If the process is the session leader,
 then SIGHUP and SIGCONT signals are sent to the foreground process group
 and all processes in the current session lose their controlling tty.
 .sp
-This \fBioctl\fP() call only works on file descriptors connected
+This \fBioctl\fP(2) call only works on file descriptors connected
 to \fI/dev/tty\fP.
 It is used by daemon processes when they are invoked
 by a user at a terminal.
diff --git a/man4/vcs.4 b/man4/vcs.4
index 9a4aee4d..46d0cdd0 100644
--- a/man4/vcs.4
+++ b/man4/vcs.4
@@ -55,7 +55,7 @@ The devices for the first eight virtual consoles may be created by:
 .fi
 
 No
-.BR ioctl ()
+.BR ioctl (2)
 requests are supported.
 .SH EXAMPLE
 You may do a screendump on vt3 by switching to vt1 and typing