summaryrefslogtreecommitdiff
path: root/gs/base/gdevdm24.c
diff options
context:
space:
mode:
Diffstat (limited to 'gs/base/gdevdm24.c')
-rw-r--r--gs/base/gdevdm24.c264
1 files changed, 130 insertions, 134 deletions
diff --git a/gs/base/gdevdm24.c b/gs/base/gdevdm24.c
index 1343ab1ff..2ca7d585a 100644
--- a/gs/base/gdevdm24.c
+++ b/gs/base/gdevdm24.c
@@ -1,6 +1,6 @@
/* Copyright (C) 2001-2006 Artifex Software, Inc.
All Rights Reserved.
-
+
This software is provided AS-IS with no warranty, either express or
implied.
@@ -13,7 +13,7 @@
/* $Id$*/
/* High-res 24Dot-matrix printer driver */
-/* Supported printers
+/* Supported printers
* NEC P6 and similar, implemented by Andreas Schwab (schwab@ls5.informatik.uni-dortmund.de)
* Epson LQ850, implemented by Christian Felsch (felsch@tu-harburg.d400.de)
*/
@@ -24,21 +24,20 @@
static dev_proc_print_page (necp6_print_page);
const gx_device_printer far_data gs_necp6_device =
prn_device (prn_std_procs, "necp6",
- DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
- 360, 360,
- 0, 0, 0.5, 0, /* margins */
- 1, necp6_print_page);
-
+ DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
+ 360, 360,
+ 0, 0, 0.5, 0, /* margins */
+ 1, necp6_print_page);
/* Driver for Epson LQ850 */
/* I've tested this driver on a BJ300 with LQ850 emulation and there it produce correct 360x360dpi output. */
static dev_proc_print_page (lq850_print_page);
const gx_device_printer gs_lq850_device =
prn_device (prn_std_procs, "lq850",
- DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
- 360, 360,
- 0, 0, 0.5, 0, /* margins */
- 1, lq850_print_page);
+ DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
+ 360, 360,
+ 0, 0, 0.5, 0, /* margins */
+ 1, lq850_print_page);
/* ------ Internal routines ------ */
@@ -69,16 +68,16 @@ dot24_print_page (gx_device_printer *pdev, FILE *prn_stream, char *init_string,
if (in == 0 || out == 0)
{
if (out)
- gs_free (pdev->memory, (char *) out, out_size, 1, "dot24_print_page (out)");
+ gs_free (pdev->memory, (char *) out, out_size, 1, "dot24_print_page (out)");
if (in)
- gs_free (pdev->memory, (char *) in, in_size, 1, "dot24_print_page (in)");
+ gs_free (pdev->memory, (char *) in, in_size, 1, "dot24_print_page (in)");
return_error (gs_error_VMerror);
}
/* Initialize the printer and reset the margins. */
fwrite (init_string, init_len - 1, sizeof (char), prn_stream);
fputc ((int) (pdev->width / pdev->x_pixels_per_inch * 10) + 2,
- prn_stream);
+ prn_stream);
/* Print lines of graphics */
while (lnum < pdev->height)
@@ -93,127 +92,127 @@ dot24_print_page (gx_device_printer *pdev, FILE *prn_stream, char *init_string,
/* Copy 1 scan line and test for all zero. */
gdev_prn_copy_scan_lines (pdev, lnum, in, line_size);
if (in[0] == 0
- && !memcmp ((char *) in, (char *) in + 1, line_size - 1))
- {
- lnum++;
- skip += 2 - y_high;
- continue;
- }
+ && !memcmp ((char *) in, (char *) in + 1, line_size - 1))
+ {
+ lnum++;
+ skip += 2 - y_high;
+ continue;
+ }
/* Vertical tab to the appropriate position. */
while ((skip >> 1) > 255)
- {
- fputs ("\033J\377", prn_stream);
- skip -= 255 * 2;
- }
+ {
+ fputs ("\033J\377", prn_stream);
+ skip -= 255 * 2;
+ }
if (skip)
- {
- if (skip >> 1)
- fprintf (prn_stream, "\033J%c", skip >> 1);
- if (skip & 1)
- fputc ('\n', prn_stream);
- }
+ {
+ if (skip >> 1)
+ fprintf (prn_stream, "\033J%c", skip >> 1);
+ if (skip & 1)
+ fputc ('\n', prn_stream);
+ }
/* Copy the rest of the scan lines. */
if (y_high)
- {
- inp = in + line_size;
- for (lcnt = 1; lcnt < 24; lcnt++, inp += line_size)
- if (!gdev_prn_copy_scan_lines (pdev, lnum + lcnt * 2, inp,
- line_size))
- {
- memset (inp, 0, (24 - lcnt) * line_size);
- break;
- }
- inp = in + line_size * 24;
- for (lcnt = 0; lcnt < 24; lcnt++, inp += line_size)
- if (!gdev_prn_copy_scan_lines (pdev, lnum + lcnt * 2 + 1, inp,
- line_size))
- {
- memset (inp, 0, (24 - lcnt) * line_size);
- break;
- }
- }
+ {
+ inp = in + line_size;
+ for (lcnt = 1; lcnt < 24; lcnt++, inp += line_size)
+ if (!gdev_prn_copy_scan_lines (pdev, lnum + lcnt * 2, inp,
+ line_size))
+ {
+ memset (inp, 0, (24 - lcnt) * line_size);
+ break;
+ }
+ inp = in + line_size * 24;
+ for (lcnt = 0; lcnt < 24; lcnt++, inp += line_size)
+ if (!gdev_prn_copy_scan_lines (pdev, lnum + lcnt * 2 + 1, inp,
+ line_size))
+ {
+ memset (inp, 0, (24 - lcnt) * line_size);
+ break;
+ }
+ }
else
- {
- lcnt = 1 + gdev_prn_copy_scan_lines (pdev, lnum + 1, in + line_size,
- in_size - line_size);
- if (lcnt < 24)
- /* Pad with lines of zeros. */
- memset (in + lcnt * line_size, 0, in_size - lcnt * line_size);
- }
+ {
+ lcnt = 1 + gdev_prn_copy_scan_lines (pdev, lnum + 1, in + line_size,
+ in_size - line_size);
+ if (lcnt < 24)
+ /* Pad with lines of zeros. */
+ memset (in + lcnt * line_size, 0, in_size - lcnt * line_size);
+ }
for (ypass = 0; ypass < y_passes; ypass++)
- {
- out_end = out;
- inp = in;
- if (ypass)
- inp += line_size * 24;
- in_end = inp + line_size;
-
- for (; inp < in_end; inp++, out_end += 24)
- {
- memflip8x8 (inp, line_size, out_end, 3);
- memflip8x8 (inp + line_size * 8, line_size, out_end + 1, 3);
- memflip8x8 (inp + line_size * 16, line_size, out_end + 2, 3);
- }
- /* Remove trailing 0s. */
- while (out_end - 3 >= out && out_end[-1] == 0
- && out_end[-2] == 0 && out_end[-3] == 0)
- out_end -= 3;
-
- for (out_blk = outp = out; outp < out_end;)
- {
- /* Skip a run of leading 0s. */
- /* At least 10 are needed to make tabbing worth it. */
-
- if (outp[0] == 0 && outp + 12 <= out_end
- && outp[1] == 0 && outp[2] == 0
- && outp[3] == 0 && outp[4] == 0 && outp[5] == 0
- && outp[6] == 0 && outp[7] == 0 && outp[8] == 0
- && outp[9] == 0 && outp[10] == 0 && outp[11] == 0)
- {
- byte *zp = outp;
- int tpos;
- byte *newp;
- outp += 12;
- while (outp + 3 <= out_end
- && outp[0] == 0 && outp[1] == 0 && outp[2] == 0)
- outp += 3;
- tpos = (outp - out) / bytes_per_space;
- newp = out + tpos * bytes_per_space;
- if (newp > zp + 10)
- {
- /* Output preceding bit data. */
- /* only false at beginning of line */
- if (zp > out_blk)
- {
- if (x_high)
- dot24_improve_bitmap (out_blk, (int) (zp - out_blk));
- dot24_output_run (out_blk, (int) (zp - out_blk),
- x_high, prn_stream);
- }
- /* Tab over to the appropriate position. */
- fprintf (prn_stream, "\033D%c%c\t", tpos, 0);
- out_blk = outp = newp;
- }
- }
- else
- outp += 3;
- }
- if (outp > out_blk)
- {
- if (x_high)
- dot24_improve_bitmap (out_blk, (int) (outp - out_blk));
- dot24_output_run (out_blk, (int) (outp - out_blk), x_high,
- prn_stream);
- }
-
- fputc ('\r', prn_stream);
- if (ypass < y_passes - 1)
- fputc ('\n', prn_stream);
- }
+ {
+ out_end = out;
+ inp = in;
+ if (ypass)
+ inp += line_size * 24;
+ in_end = inp + line_size;
+
+ for (; inp < in_end; inp++, out_end += 24)
+ {
+ memflip8x8 (inp, line_size, out_end, 3);
+ memflip8x8 (inp + line_size * 8, line_size, out_end + 1, 3);
+ memflip8x8 (inp + line_size * 16, line_size, out_end + 2, 3);
+ }
+ /* Remove trailing 0s. */
+ while (out_end - 3 >= out && out_end[-1] == 0
+ && out_end[-2] == 0 && out_end[-3] == 0)
+ out_end -= 3;
+
+ for (out_blk = outp = out; outp < out_end;)
+ {
+ /* Skip a run of leading 0s. */
+ /* At least 10 are needed to make tabbing worth it. */
+
+ if (outp[0] == 0 && outp + 12 <= out_end
+ && outp[1] == 0 && outp[2] == 0
+ && outp[3] == 0 && outp[4] == 0 && outp[5] == 0
+ && outp[6] == 0 && outp[7] == 0 && outp[8] == 0
+ && outp[9] == 0 && outp[10] == 0 && outp[11] == 0)
+ {
+ byte *zp = outp;
+ int tpos;
+ byte *newp;
+ outp += 12;
+ while (outp + 3 <= out_end
+ && outp[0] == 0 && outp[1] == 0 && outp[2] == 0)
+ outp += 3;
+ tpos = (outp - out) / bytes_per_space;
+ newp = out + tpos * bytes_per_space;
+ if (newp > zp + 10)
+ {
+ /* Output preceding bit data. */
+ /* only false at beginning of line */
+ if (zp > out_blk)
+ {
+ if (x_high)
+ dot24_improve_bitmap (out_blk, (int) (zp - out_blk));
+ dot24_output_run (out_blk, (int) (zp - out_blk),
+ x_high, prn_stream);
+ }
+ /* Tab over to the appropriate position. */
+ fprintf (prn_stream, "\033D%c%c\t", tpos, 0);
+ out_blk = outp = newp;
+ }
+ }
+ else
+ outp += 3;
+ }
+ if (outp > out_blk)
+ {
+ if (x_high)
+ dot24_improve_bitmap (out_blk, (int) (outp - out_blk));
+ dot24_output_run (out_blk, (int) (outp - out_blk), x_high,
+ prn_stream);
+ }
+
+ fputc ('\r', prn_stream);
+ if (ypass < y_passes - 1)
+ fputc ('\n', prn_stream);
+ }
skip = 48 - y_high;
lnum += bits_per_column;
}
@@ -251,32 +250,29 @@ dot24_improve_bitmap (byte *data, int count)
register byte *p = data + 6;
for (i = 6; i < count; i += 3, p += 3)
- {
- p[-6] &= ~(~p[0] & p[-3]);
- p[-5] &= ~(~p[1] & p[-2]);
- p[-4] &= ~(~p[2] & p[-1]);
- }
+ {
+ p[-6] &= ~(~p[0] & p[-3]);
+ p[-5] &= ~(~p[1] & p[-2]);
+ p[-4] &= ~(~p[2] & p[-1]);
+ }
p[-6] &= ~p[-3];
p[-5] &= ~p[-2];
p[-4] &= ~p[-1];
}
-
static int
necp6_print_page(gx_device_printer *pdev, FILE *prn_stream)
{
char necp6_init_string [] = "\033@\033P\033l\000\r\034\063\001\033Q";
-
+
return dot24_print_page(pdev, prn_stream, necp6_init_string, sizeof(necp6_init_string));
}
-
static int
lq850_print_page(gx_device_printer *pdev, FILE *prn_stream)
{
char lq850_init_string [] = "\033@\033P\033l\000\r\033\053\001\033Q";
-
+
return dot24_print_page(pdev, prn_stream, lq850_init_string, sizeof(lq850_init_string));
}
-
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 07:25:12 +0000