m68k: merge m68k and m68knommu arch directories

There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 0 insertions, 844 deletions

diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
deleted file mode 100644
index b5424cf948e6..000000000000
--- a/arch/m68knommu/Kconfig
+++ /dev/null
@@ -1,844 +0,0 @@
-config M68K
-	bool
-	default y
-	select HAVE_IDE
-	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
-
-config MMU
-	bool
-	default n
-
-config NO_DMA
-	bool
-	depends on !COLDFIRE
-	default y
-
-config FPU
-	bool
-	default n
-
-config ZONE_DMA
-	bool
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-
-config GENERIC_GPIO
-	bool
-	default n
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_CMOS_UPDATE
-	bool
-	default y
-
-config TIME_LOW_RES
-	bool
-	default y
-
-config GENERIC_CLOCKEVENTS
-	bool
-	default n
-
-config NO_IOPORT
-	def_bool y
-
-config COLDFIRE_SW_A7
-	bool
-	default n
-
-config HAVE_CACHE_SPLIT
-	bool
-
-config HAVE_CACHE_CB
-	bool
-
-config HAVE_MBAR
-	bool
-
-config HAVE_IPSBAR
-	bool
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-menu "Processor type and features"
-
-choice
-	prompt "CPU"
-	default M68EZ328
-
-config M68328
-	bool "MC68328"
-	help
-	  Motorola 68328 processor support.
-
-config M68EZ328
-	bool "MC68EZ328"
-	help
-	  Motorola 68EX328 processor support.
-
-config M68VZ328
-	bool "MC68VZ328"
-	help
-	  Motorola 68VZ328 processor support.
-
-config M68360
-	bool "MC68360"
-	help
-	  Motorola 68360 processor support.
-
-config M5206
-	bool "MCF5206"
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5206 processor support.
-
-config M5206e
-	bool "MCF5206e"
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5206e processor support.
-
-config M520x
-	bool "MCF520x"
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	help
-	   Freescale Coldfire 5207/5208 processor support.
-
-config M523x
-	bool "MCF523x"
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Freescale Coldfire 5230/1/2/4/5 processor support
-
-config M5249
-	bool "MCF5249"
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5249 processor support.
-
-config M5271
-	bool "MCF5271"
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Freescale (Motorola) ColdFire 5270/5271 processor support.
-
-config M5272
-	bool "MCF5272"
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5272 processor support.
-
-config M5275
-	bool "MCF5275"
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Freescale (Motorola) ColdFire 5274/5275 processor support.
-
-config M528x
-	bool "MCF528x"
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Motorola ColdFire 5280/5282 processor support.
-
-config M5307
-	bool "MCF5307"
-	select COLDFIRE_SW_A7
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5307 processor support.
-
-config M532x
-	bool "MCF532x"
-	select HAVE_CACHE_CB
-	help
-	  Freescale (Motorola) ColdFire 532x processor support.
-
-config M5407
-	bool "MCF5407"
-	select COLDFIRE_SW_A7
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5407 processor support.
-
-config M547x
-	bool "MCF547x"
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
-
-config M548x
-	bool "MCF548x"
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
-
-endchoice
-
-config M527x
-	bool
-	depends on (M5271 || M5275)
-	select GENERIC_CLOCKEVENTS
-	default y
-
-config M54xx
-	bool
-	depends on (M548x || M547x)
-	default y
-
-config COLDFIRE
-	bool
-	depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx)
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	default y
-
-config CLOCK_SET
-	bool "Enable setting the CPU clock frequency"
-	default n
-	help
-	  On some CPU's you do not need to know what the core CPU clock
-	  frequency is. On these you can disable clock setting. On some
-	  traditional 68K parts, and on all ColdFire parts you need to set
-	  the appropriate CPU clock frequency. On these devices many of the
-	  onboard peripherals derive their timing from the master CPU clock
-	  frequency.
-
-config CLOCK_FREQ
-	int "Set the core clock frequency"
-	default "66666666"
-	depends on CLOCK_SET
-	help
-	  Define the CPU clock frequency in use. This is the core clock
-	  frequency, it may or may not be the same as the external clock
-	  crystal fitted to your board. Some processors have an internal
-	  PLL and can have their frequency programmed at run time, others
-	  use internal dividers. In general the kernel won't setup a PLL
-	  if it is fitted (there are some exceptions). This value will be
-	  specific to the exact CPU that you are using.
-
-config OLDMASK
-	bool "Old mask 5307 (1H55J) silicon"
-	depends on M5307
-	help
-	  Build support for the older revision ColdFire 5307 silicon.
-	  Specifically this is the 1H55J mask revision.
-
-if HAVE_CACHE_SPLIT
-choice
-	prompt "Split Cache Configuration"
-	default CACHE_I
-
-config CACHE_I
-	bool "Instruction"
-	help
-	  Use all of the ColdFire CPU cache memory as an instruction cache.
-
-config CACHE_D
-	bool "Data"
-	help
-	  Use all of the ColdFire CPU cache memory as a data cache.
-
-config CACHE_BOTH
-	bool "Both"
-	help
-	  Split the ColdFire CPU cache, and use half as an instruction cache
-	  and half as a data cache.
-endchoice
-endif
-
-if HAVE_CACHE_CB
-choice
-	prompt "Data cache mode"
-	default CACHE_WRITETHRU
-
-config CACHE_WRITETHRU
-	bool "Write-through"
-	help
-	  The ColdFire CPU cache is set into Write-through mode.
-
-config CACHE_COPYBACK
-	bool "Copy-back"
-	help
-	  The ColdFire CPU cache is set into Copy-back mode.
-endchoice
-endif
-
-comment "Platform"
-
-config PILOT3
-	bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
-	depends on M68328
-	help
-	  Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
-
-config XCOPILOT_BUGS
-	bool "(X)Copilot support"
-	depends on PILOT3
-	help
-	  Support the bugs of Xcopilot.
-
-config UC5272
-	bool 'Arcturus Networks uC5272 dimm board support'
-	depends on M5272
-	help
-	  Support for the Arcturus Networks uC5272 dimm board.
-
-config UC5282
-	bool "Arcturus Networks uC5282 board support"
-	depends on M528x
-	help
-	  Support for the Arcturus Networks uC5282 dimm board.
-
-config UCSIMM
-	bool "uCsimm module support"
-	depends on M68EZ328
-	help
-	  Support for the Arcturus Networks uCsimm module.
-
-config UCDIMM
-	bool "uDsimm module support"
-	depends on M68VZ328
-	help
-	  Support for the Arcturus Networks uDsimm module.
-
-config DRAGEN2
-	bool "DragenEngine II board support"
-	depends on M68VZ328
-	help
-	  Support for the DragenEngine II board.
-
-config DIRECT_IO_ACCESS
-	bool "Allow user to access IO directly"
-	depends on (UCSIMM || UCDIMM || DRAGEN2)
-	help
-	  Disable the CPU internal registers protection in user mode,
-	  to allow a user application to read/write them.
-
-config INIT_LCD
-	bool "Initialize LCD"
-	depends on (UCSIMM || UCDIMM || DRAGEN2)
-	help
-	  Initialize the LCD controller of the 68x328 processor.
-
-config MEMORY_RESERVE
-	int "Memory reservation (MiB)"
-	depends on (UCSIMM || UCDIMM)
-	help
-	  Reserve certain memory regions on 68x328 based boards.
-
-config UCQUICC
-	bool "Lineo uCquicc board support"
-	depends on M68360
-	help
-	  Support for the Lineo uCquicc board.
-
-config ARN5206
-	bool "Arnewsh 5206 board support"
-	depends on M5206
-	help
-	  Support for the Arnewsh 5206 board.
-
-config M5206eC3
-	bool "Motorola M5206eC3 board support"
-	depends on M5206e
-	help
-	  Support for the Motorola M5206eC3 board.
-
-config ELITE
-	bool "Motorola M5206eLITE board support"
-	depends on M5206e
-	help
-	  Support for the Motorola M5206eLITE board.
-
-config M5208EVB
-	bool "Freescale M5208EVB board support"
-	depends on M520x
-	help
-	  Support for the Freescale Coldfire M5208EVB.
-
-config M5235EVB
-	bool "Freescale M5235EVB support"
-	depends on M523x
-	help
-	  Support for the Freescale M5235EVB board.
-
-config M5249C3
-	bool "Motorola M5249C3 board support"
-	depends on M5249
-	help
-	  Support for the Motorola M5249C3 board.
-
-config M5271EVB
-	bool "Freescale (Motorola) M5271EVB board support"
-	depends on M5271
-	help
-	  Support for the Freescale (Motorola) M5271EVB board.
-
-config M5275EVB
-	bool "Freescale (Motorola) M5275EVB board support"
-	depends on M5275
-	help
-	  Support for the Freescale (Motorola) M5275EVB board.
-
-config M5272C3
-	bool "Motorola M5272C3 board support"
-	depends on M5272
-	help
-	  Support for the Motorola M5272C3 board.
-
-config COBRA5272
-	bool "senTec COBRA5272 board support"
-	depends on M5272
-	help
-	  Support for the senTec COBRA5272 board.
-
-config AVNET5282
-	bool "Avnet 5282 board support"
-	depends on M528x
-	help
-	  Support for the Avnet 5282 board.  
-	  
-config M5282EVB
-	bool "Motorola M5282EVB board support"
-	depends on M528x
-	help
-	  Support for the Motorola M5282EVB board.
-
-config COBRA5282
-	bool "senTec COBRA5282 board support"
-	depends on M528x
-	help
-	  Support for the senTec COBRA5282 board.
-	  
-config SOM5282EM
-	bool "EMAC.Inc SOM5282EM board support"
-	depends on M528x
-	help
-	  Support for the EMAC.Inc SOM5282EM module.  
-	  
-config WILDFIRE
-	bool "Intec Automation Inc. WildFire board support"
-	depends on M528x
-	help
-	  Support for the Intec Automation Inc. WildFire.
-	  
-config WILDFIREMOD
-	bool "Intec Automation Inc. WildFire module support"
-	depends on M528x
-	help
-	  Support for the Intec Automation Inc. WildFire module.
-
-config ARN5307
-	bool "Arnewsh 5307 board support"
-	depends on M5307
-	help
-	  Support for the Arnewsh 5307 board.
-
-config M5307C3
-	bool "Motorola M5307C3 board support"
-	depends on M5307
-	help
-	  Support for the Motorola M5307C3 board.
-
-config SECUREEDGEMP3
-	bool "SnapGear SecureEdge/MP3 platform support"
-	depends on M5307
-	help
-	  Support for the SnapGear SecureEdge/MP3 platform.
-
-config M5329EVB
-	bool "Freescale (Motorola) M5329EVB board support"
-	depends on M532x
-	help
-	  Support for the Freescale (Motorola) M5329EVB board.
-
-config COBRA5329
-	bool "senTec COBRA5329 board support"
-	depends on M532x
-	help
-	  Support for the senTec COBRA5329 board.
-
-config M5407C3
-	bool "Motorola M5407C3 board support"
-	depends on M5407
-	help
-	  Support for the Motorola M5407C3 board.
-
-config FIREBEE
-	bool "FireBee board support"
-	depends on M547x
-	help
-	  Support for the FireBee ColdFire 5475 based board.
-
-config CLEOPATRA
-	bool "Feith CLEOPATRA board support"
-	depends on (M5307 || M5407)
-	help
-	  Support for the Feith Cleopatra boards.
-
-config CANCam
-	bool "Feith CANCam board support"
-	depends on M5272
-	help
-	  Support for the Feith CANCam board.
-
-config SCALES
-	bool "Feith SCALES board support"
-	depends on M5272
-	help
-	  Support for the Feith SCALES board.
-
-config NETtel
-	bool "SecureEdge/NETtel board support"
-	depends on (M5206e || M5272 || M5307)
-	help
-	  Support for the SnapGear NETtel/SecureEdge/SnapGear boards.
-
-config SNAPGEAR
-	bool "SnapGear router board support"
-	depends on NETtel
-	help
-	  Special additional support for SnapGear router boards.
-
-config CPU16B
-	bool "Sneha Technologies S.L. Sarasvati board support"
-	depends on M5272
-	help
-	  Support for the SNEHA CPU16B board.
-
-config MOD5272
-	bool "Netburner MOD-5272 board support"
-	depends on M5272
-	help
-	  Support for the Netburner MOD-5272 board.
-
-config SAVANTrosie1
-	bool "Savant Rosie1 board support"
-	depends on M523x
-	help
-	  Support for the Savant Rosie1 board.
-
-config ROMFS_FROM_ROM
-	bool "ROMFS image not RAM resident"
-	depends on (NETtel || SNAPGEAR)
-	help
-	  The ROMfs filesystem will stay resident in the FLASH/ROM, not be
-	  moved into RAM.
-
-config PILOT
-	bool
-	default y
-	depends on (PILOT3 || PILOT5)
-
-config ARNEWSH
-	bool
-	default y
-	depends on (ARN5206 || ARN5307)
-
-config FREESCALE
-	bool
-	default y
-	depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3)
-
-config HW_FEITH
-	bool
-	default y
-	depends on (CLEOPATRA || CANCam || SCALES)
-
-config senTec
-	bool
-	default y
-	depends on (COBRA5272 || COBRA5282)
-	
-config EMAC_INC
-	bool
-	default y
-	depends on (SOM5282EM)
-
-config SNEHA
-	bool
-	default y
-	depends on CPU16B
-
-config SAVANT
-	bool
-	default y
-	depends on SAVANTrosie1
-
-config AVNET
-	bool
-	default y
-	depends on (AVNET5282)
-
-config UBOOT
-	bool "Support for U-Boot command line parameters"
-	help
-	  If you say Y here kernel will try to collect command
-	  line parameters from the initial u-boot stack.
-	default n
-
-config 4KSTACKS
-	bool "Use 4Kb for kernel stacks instead of 8Kb"
-	default y
-	help
-	  If you say Y here the kernel will use a 4Kb stacksize for the
-	  kernel stack attached to each process/thread. This facilitates
-	  running more threads on a system and also reduces the pressure
-	  on the VM subsystem for higher order allocations.
-
-config HZ
-	int
-	default 1000 if CLEOPATRA
-	default 100
-
-comment "RAM configuration"
-
-config RAMBASE
-	hex "Address of the base of RAM"
-	default "0"
-	help
-	  Define the address that RAM starts at. On many platforms this is
-	  0, the base of the address space. And this is the default. Some
-	  platforms choose to setup their RAM at other addresses within the
-	  processor address space.
-
-config RAMSIZE
-	hex "Size of RAM (in bytes), or 0 for automatic"
-	default "0x400000"
-	help
-	  Define the size of the system RAM. If you select 0 then the
-	  kernel will try to probe the RAM size at runtime. This is not
-	  supported on all CPU types.
-
-config VECTORBASE
-	hex "Address of the base of system vectors"
-	default "0"
-	help
-	  Define the address of the system vectors. Commonly this is
-	  put at the start of RAM, but it doesn't have to be. On ColdFire
-	  platforms this address is programmed into the VBR register, thus
-	  actually setting the address to use.
-
-config MBAR
-	hex "Address of the MBAR (internal peripherals)"
-	default "0x10000000"
-	depends on HAVE_MBAR
-	help
-	  Define the address of the internal system peripherals. This value
-	  is set in the processors MBAR register. This is generally setup by
-	  the boot loader, and will not be written by the kernel. By far most
-	  ColdFire boards use the default 0x10000000 value, so if unsure then
-	  use this.
-
-config IPSBAR
-	hex "Address of the IPSBAR (internal peripherals)"
-	default "0x40000000"
-	depends on HAVE_IPSBAR
-	help
-	  Define the address of the internal system peripherals. This value
-	  is set in the processors IPSBAR register. This is generally setup by
-	  the boot loader, and will not be written by the kernel. By far most
-	  ColdFire boards use the default 0x40000000 value, so if unsure then
-	  use this.
-
-config KERNELBASE
-	hex "Address of the base of kernel code"
-	default "0x400"
-	help
-	  Typically on m68k systems the kernel will not start at the base
-	  of RAM, but usually some small offset from it. Define the start
-	  address of the kernel here. The most common setup will have the
-	  processor vectors at the base of RAM and then the start of the
-	  kernel. On some platforms some RAM is reserved for boot loaders
-	  and the kernel starts after that. The 0x400 default was based on
-	  a system with the RAM based at address 0, and leaving enough room
-	  for the theoretical maximum number of 256 vectors.
-
-choice
-	prompt "RAM bus width"
-	default RAMAUTOBIT
-
-config RAMAUTOBIT
-	bool "AUTO"
-	help
-	  Select the physical RAM data bus size. Not needed on most platforms,
-	  so you can generally choose AUTO.
-
-config RAM8BIT
-	bool "8bit"
-	help
-	  Configure RAM bus to be 8 bits wide.
-
-config RAM16BIT
-	bool "16bit"
-	help
-	  Configure RAM bus to be 16 bits wide.
-
-config RAM32BIT
-	bool "32bit"
-	help
-	  Configure RAM bus to be 32 bits wide.
-
-endchoice
-
-comment "ROM configuration"
-
-config ROM
-	bool "Specify ROM linker regions"
-	default n
-	help
-	  Define a ROM region for the linker script. This creates a kernel
-	  that can be stored in flash, with possibly the text, and data
-	  regions being copied out to RAM at startup.
-
-config ROMBASE
-	hex "Address of the base of ROM device"
-	default "0"
-	depends on ROM
-	help
-	  Define the address that the ROM region starts at. Some platforms
-	  use this to set their chip select region accordingly for the boot
-	  device.
-
-config ROMVEC
-	hex "Address of the base of the ROM vectors"
-	default "0"
-	depends on ROM
-	help
-	  This is almost always the same as the base of the ROM. Since on all
-	  68000 type variants the vectors are at the base of the boot device
-	  on system startup.
-
-config ROMVECSIZE
-	hex "Size of ROM vector region (in bytes)"
-	default "0x400"
-	depends on ROM
-	help
-	  Define the size of the vector region in ROM. For most 68000
-	  variants this would be 0x400 bytes in size. Set to 0 if you do
-	  not want a vector region at the start of the ROM.
-
-config ROMSTART
-	hex "Address of the base of system image in ROM"
-	default "0x400"
-	depends on ROM
-	help
-	  Define the start address of the system image in ROM. Commonly this
-	  is strait after the ROM vectors.
-
-config ROMSIZE
-	hex "Size of the ROM device"
-	default "0x100000"
-	depends on ROM
-	help
-	  Size of the ROM device. On some platforms this is used to setup
-	  the chip select that controls the boot ROM device.
-
-choice
-	prompt "Kernel executes from"
-	---help---
-	  Choose the memory type that the kernel will be running in.
-
-config RAMKERNEL
-	bool "RAM"
-	help
-	  The kernel will be resident in RAM when running.
-
-config ROMKERNEL
-	bool "ROM"
-	help
-	  The kernel will be resident in FLASH/ROM when running. This is
-	  often referred to as Execute-in-Place (XIP), since the kernel
-	  code executes from the position it is stored in the FLASH/ROM.
-
-endchoice
-
-if COLDFIRE
-source "kernel/Kconfig.preempt"
-endif
-
-source "kernel/time/Kconfig"
-
-source "mm/Kconfig"
-
-endmenu
-
-config ISA_DMA_API
-	bool
-	depends on !M5272
-	default y
-
-source "drivers/pcmcia/Kconfig"
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-menu "Power management options"
-
-config PM
-	bool "Power Management support"
-	help
-	  Support processor power management modes
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/m68knommu/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"