path: root/po/zh_CN.po

# translation of pulseaudio.master-tx.po to Simplified Chinese
# 简体中文翻译
# Copyright (C) 2008 THE 'S COPYRIGHT HOLDER
# This file is distributed under the same license as the  package.
# 闫丰刚 (sainry)<sainry@gmail.com> 2008
#
#
# 闫丰刚 <sainry@gmail.com>, 2009.
# Leah Liu <lliu@redhat.com>, 2009, 2012.
#
msgid ""
msgstr ""
"Project-Id-Version: pulseaudio.master-tx\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2012-01-30 10:10+0000\n"
"PO-Revision-Date: 2012-01-30 09:56+0000\n"
"Last-Translator: Leah Liu <lliu@redhat.com>\n"
"Language-Team: Simplified Chinese <zh@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"

#: ../src/modules/alsa/alsa-util.c:1136 ../src/modules/alsa/alsa-util.c:1204
#, c-format
msgid ""
"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu "
"ms).\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers."
msgstr ""
"snd_pcm_avail() 返回的值非常大：%lu 字节（%lu ms）。\n"
"很可能是 ALSA 驱动程序 '%s' 中的 bug。请向 ALSA 开发者举报这个问题。"

#: ../src/modules/alsa/alsa-util.c:1179
#, c-format
msgid ""
"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s"
"%lu ms).\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers."
msgstr ""
"snd_pcm_delay() 返回的值非常大：%li 字节（%s%lu ms）。\n"
"很可能是 ALSA 驱动程序 '%s' 中的 bug。请向 ALSA 开发者举报这个问题。"

#: ../src/modules/alsa/alsa-util.c:1220
#, fuzzy, c-format
msgid ""
"snd_pcm_avail_delay() returned strange values: delay %lu is less than avail "
"%lu.\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers."
msgstr ""
"snd_pcm_avail() 返回的值非常大：%lu 字节（%lu ms）。\n"
"很可能是 ALSA 驱动程序 '%s' 中的 bug。请向 ALSA 开发者举报这个问题。"

#: ../src/modules/alsa/alsa-util.c:1263
#, c-format
msgid ""
"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes "
"(%lu ms).\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers."
msgstr ""
"snd_pcm_mmap_begin() 返回的值非常大：%lu 字节（%lu ms）。\n"
"很可能是 ALSA 驱动程序 '%s' 中的 bug。请向 ALSA 开发者举报这个问题。"

#: ../src/modules/module-always-sink.c:38
msgid "Always keeps at least one sink loaded even if it's a null one"
msgstr "总是保持至少载入一个漏，即使它是空的"

#: ../src/modules/module-always-sink.c:82
msgid "Dummy Output"
msgstr "假输出"

#: ../src/modules/module-ladspa-sink.c:48
msgid "Virtual LADSPA sink"
msgstr "虚拟 LDASPA 漏"

#: ../src/modules/module-ladspa-sink.c:52
#, fuzzy
msgid ""
"sink_name=<name for the sink> sink_properties=<properties for the sink> "
"master=<name of sink to filter> format=<sample format> rate=<sample rate> "
"channels=<number of channels> channel_map=<input channel map> plugin=<ladspa "
"plugin name> label=<ladspa plugin label> control=<comma separated list of "
"input control values> input_ladspaport_map=<comma separated list of input "
"LADSPA port names> output_ladspaport_map=<comma separated list of output "
"LADSPA port names> "
msgstr ""
"sink_name=<name for the sink> sink_properties=<properties for the sink> "
"master=<name of sink to filter> format=<sample format> rate=<sample rate> "
"channels=<number of channels> channel_map=<channel map> plugin=<ladspa "
"plugin name> label=<ladspa plugin label> control=<comma separated list of "
"input control values>"

#: ../src/modules/module-null-sink.c:49
msgid "Clocked NULL sink"
msgstr "定时的空漏"

#: ../src/modules/module-null-sink.c:284
msgid "Null Output"
msgstr "空输出"

#: ../src/pulsecore/sink.c:3349
msgid "Built-in Audio"
msgstr "内部音频"

#: ../src/pulsecore/sink.c:3354
msgid "Modem"
msgstr "调制解调器"

#: ../src/daemon/ltdl-bind-now.c:127
msgid "Failed to find original lt_dlopen loader."
msgstr "查找原始 lt_dlopen 加载器失败。"

#: ../src/daemon/ltdl-bind-now.c:132
msgid "Failed to allocate new dl loader."
msgstr "分配新的 dl 加载器失败。"

#: ../src/daemon/ltdl-bind-now.c:145
msgid "Failed to add bind-now-loader."
msgstr "添加 bind-now-loader 失败。"

#: ../src/daemon/main.c:139
#, c-format
msgid "Got signal %s."
msgstr "获得信号%s"

#: ../src/daemon/main.c:166
msgid "Exiting."
msgstr "退出"

#: ../src/daemon/main.c:184
#, c-format
msgid "Failed to find user '%s'."
msgstr "找不到用户 `%s' "

#: ../src/daemon/main.c:189
#, c-format
msgid "Failed to find group '%s'."
msgstr "找不到用户组 `%s'"

#: ../src/daemon/main.c:193
#, c-format
msgid "Found user '%s' (UID %lu) and group '%s' (GID %lu)."
msgstr "发现用户'%s' (UID %lu)和组'%s' (GID %lu)."

#: ../src/daemon/main.c:198
#, c-format
msgid "GID of user '%s' and of group '%s' don't match."
msgstr "用户'%s'与组'%s'的GID不匹配."

#: ../src/daemon/main.c:203
#, c-format
msgid "Home directory of user '%s' is not '%s', ignoring."
msgstr "用户'%s'的主文件夹不是'%s'，忽略。"

#: ../src/daemon/main.c:206 ../src/daemon/main.c:211
#, c-format
msgid "Failed to create '%s': %s"
msgstr "创建'%s'失败： %s"

#: ../src/daemon/main.c:218
#, c-format
msgid "Failed to change group list: %s"
msgstr "更改组列表失败：%s"

#: ../src/daemon/main.c:234
#, c-format
msgid "Failed to change GID: %s"
msgstr "更改GID失败：%s"

#: ../src/daemon/main.c:250
#, c-format
msgid "Failed to change UID: %s"
msgstr "更改UID失败：%s"

#: ../src/daemon/main.c:269
msgid "Successfully dropped root privileges."
msgstr "成功放弃root权限。"

#: ../src/daemon/main.c:277
msgid "System wide mode unsupported on this platform."
msgstr "此平台不支持system-wide模式。"

#: ../src/daemon/main.c:295
#, c-format
msgid "setrlimit(%s, (%u, %u)) failed: %s"
msgstr "setrlimit(%s, (%u, %u)) 失败：%s"

#: ../src/daemon/main.c:496
msgid "Failed to parse command line."
msgstr "分析命令行失败。"

#: ../src/daemon/main.c:529
msgid ""
"System mode refused for non-root user. Only starting the D-Bus server lookup "
"service."
msgstr ""

#: ../src/daemon/main.c:611
msgid "Daemon not running"
msgstr "后台程序没有运行"

#: ../src/daemon/main.c:613
#, c-format
msgid "Daemon running as PID %u"
msgstr "后台程序正在运行，PID %u"

#: ../src/daemon/main.c:628
#, c-format
msgid "Failed to kill daemon: %s"
msgstr "杀死后台程序失败：%s"

#: ../src/daemon/main.c:657
msgid ""
"This program is not intended to be run as root (unless --system is "
"specified)."
msgstr "不应以root身份运行本程序（除非指定 --system）。"

#: ../src/daemon/main.c:660
msgid "Root privileges required."
msgstr "需要 root 权限。"

#: ../src/daemon/main.c:667
msgid "--start not supported for system instances."
msgstr "系统实例不支持 --start。"

#: ../src/daemon/main.c:707
#, c-format
msgid "User-configured server at %s, refusing to start/autospawn."
msgstr ""

#: ../src/daemon/main.c:713
#, c-format
msgid ""
"User-configured server at %s, which appears to be local. Probing deeper."
msgstr ""

#: ../src/daemon/main.c:718
msgid "Running in system mode, but --disallow-exit not set!"
msgstr "正在以系统模式运行，但是 --disallow-exit 未设定！"

#: ../src/daemon/main.c:721
msgid "Running in system mode, but --disallow-module-loading not set!"
msgstr "正在以系统模式运行，但是 --disallow-module-loading 未设定！"

#: ../src/daemon/main.c:724
msgid "Running in system mode, forcibly disabling SHM mode!"
msgstr "正在以系统模式运行，强制禁用SHM模式！"

#: ../src/daemon/main.c:729
msgid "Running in system mode, forcibly disabling exit idle time!"
msgstr "正在以系统模式运行，强制禁用退出空闲时间！"

#: ../src/daemon/main.c:757
msgid "Failed to acquire stdio."
msgstr "获取stdio失败。"

#: ../src/daemon/main.c:763 ../src/daemon/main.c:828
#, fuzzy, c-format
msgid "pipe() failed: %s"
msgstr "管道失败：%s"

#: ../src/daemon/main.c:768 ../src/daemon/main.c:833
#, c-format
msgid "fork() failed: %s"
msgstr "fork()失败：%s"

#: ../src/daemon/main.c:783 ../src/daemon/main.c:848 ../src/utils/pacat.c:550
#, c-format
msgid "read() failed: %s"
msgstr "read()失败：%s"

#: ../src/daemon/main.c:789
msgid "Daemon startup failed."
msgstr "后台程序启动失败。"

#: ../src/daemon/main.c:791
msgid "Daemon startup successful."
msgstr "后台程序启动成功。"

#: ../src/daemon/main.c:816
#, fuzzy, c-format
msgid "setsid() failed: %s"
msgstr "read()失败：%s"

#: ../src/daemon/main.c:901
#, c-format
msgid "This is PulseAudio %s"
msgstr "这是 PulseAudio %s"

#: ../src/daemon/main.c:902
#, c-format
msgid "Compilation host: %s"
msgstr "编译主机：%s"

#: ../src/daemon/main.c:903 ../src/tests/resampler-test.c:418
#, c-format
msgid "Compilation CFLAGS: %s"
msgstr "编译CFLAGS：%s"

#: ../src/daemon/main.c:906
#, c-format
msgid "Running on host: %s"
msgstr "正在主机上运行：%s"

#: ../src/daemon/main.c:909
#, c-format
msgid "Found %u CPUs."
msgstr "找到 %u CPU。"

#: ../src/daemon/main.c:911
#, c-format
msgid "Page size is %lu bytes"
msgstr "页面大小为%lu字节"

#: ../src/daemon/main.c:914
msgid "Compiled with Valgrind support: yes"
msgstr "编译启用Valgrind支持：是"

#: ../src/daemon/main.c:916
msgid "Compiled with Valgrind support: no"
msgstr "编译启用Valgrind支持：否"

#: ../src/daemon/main.c:919
#, c-format
msgid "Running in valgrind mode: %s"
msgstr "正在以valgrind模式运行：%s"

#: ../src/daemon/main.c:921
#, fuzzy, c-format
msgid "Running in VM: %s"
msgstr "正在主机上运行：%s"

#: ../src/daemon/main.c:924
msgid "Optimized build: yes"
msgstr "优化生成：是"

#: ../src/daemon/main.c:926
msgid "Optimized build: no"
msgstr "优化生成：否"

#: ../src/daemon/main.c:930
msgid "NDEBUG defined, all asserts disabled."
msgstr "拒绝 NDEBUG，禁用所有 assert"

#: ../src/daemon/main.c:932
msgid "FASTPATH defined, only fast path asserts disabled."
msgstr "拒绝 FASTPATH，只禁用快速路径 assert。"

#: ../src/daemon/main.c:934
msgid "All asserts enabled."
msgstr "启用所有 assert。"

#: ../src/daemon/main.c:938
msgid "Failed to get machine ID"
msgstr "获取machine ID失败"

#: ../src/daemon/main.c:941
#, c-format
msgid "Machine ID is %s."
msgstr "machine ID是%s。"

#: ../src/daemon/main.c:945
#, c-format
msgid "Session ID is %s."
msgstr "会话 ID %s。"

#: ../src/daemon/main.c:951
#, c-format
msgid "Using runtime directory %s."
msgstr "正在使用运行时文件夹%s。"

#: ../src/daemon/main.c:956
#, c-format
msgid "Using state directory %s."
msgstr "正在使用状态文件夹%s。"

#: ../src/daemon/main.c:959
#, c-format
msgid "Using modules directory %s."
msgstr "正在使用模块目录 %s。"

#: ../src/daemon/main.c:961
#, c-format
msgid "Running in system mode: %s"
msgstr "正在以系统模式运行：%s"

#: ../src/daemon/main.c:964
msgid ""
"OK, so you are running PA in system mode. Please note that you most likely "
"shouldn't be doing that.\n"
"If you do it nonetheless then it's your own fault if things don't work as "
"expected.\n"
"Please read http://www.freedesktop.org/wiki/Software/PulseAudio/"
"Documentation/User/WhatIsWrongWithSystemWide/ for an explanation why system "
"mode is usually a bad idea."
msgstr ""
"确定，那么您正在系统模式中运行 PA。请注意：您很可能不应该这样做。\n"
"如果您无论如何都这样做了，那么出现意外情况就是您的问题。\n"
"在文章 http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/"
"User/WhatIsWrongWithSystemWide/ 中解释了为什么系统模式通常不是个好主意。"

#: ../src/daemon/main.c:981
msgid "pa_pid_file_create() failed."
msgstr "pa_pid_file_create()失败。"

#: ../src/daemon/main.c:991
msgid "Fresh high-resolution timers available! Bon appetit!"
msgstr "新鲜的高分辨率计时器开锅了！吃个饱！"

#: ../src/daemon/main.c:993
msgid ""
"Dude, your kernel stinks! The chef's recommendation today is Linux with high-"
"resolution timers enabled!"
msgstr "老兄，您的内核真臭！现在流行的是启用了高分辩率计分器的Linux！"

#: ../src/daemon/main.c:1011
msgid "pa_core_new() failed."
msgstr "pa_core_new()失败。"

#: ../src/daemon/main.c:1087
msgid "Failed to initialize daemon."
msgstr "后台程序初始化失败。"

#: ../src/daemon/main.c:1092
msgid "Daemon startup without any loaded modules, refusing to work."
msgstr "后台程序启动未加载任何模块，拒绝工作。"

#: ../src/daemon/main.c:1130
msgid "Daemon startup complete."
msgstr "后台程序启动完成。"

#: ../src/daemon/main.c:1136
msgid "Daemon shutdown initiated."
msgstr "开始关闭后台程序。"

#: ../src/daemon/main.c:1167
msgid "Daemon terminated."
msgstr "后台程序已终止。"

#: ../src/daemon/cmdline.c:113
#, fuzzy, c-format
msgid ""
"%s [options]\n"
"\n"
"COMMANDS:\n"
"  -h, --help                            Show this help\n"
"      --version                         Show version\n"
"      --dump-conf                       Dump default configuration\n"
"      --dump-modules                    Dump list of available modules\n"
"      --dump-resample-methods           Dump available resample methods\n"
"      --cleanup-shm                     Cleanup stale shared memory "
"segments\n"
"      --start                           Start the daemon if it is not "
"running\n"
"  -k  --kill                            Kill a running daemon\n"
"      --check                           Check for a running daemon (only "
"returns exit code)\n"
"\n"
"OPTIONS:\n"
"      --system[=BOOL]                   Run as system-wide instance\n"
"  -D, --daemonize[=BOOL]                Daemonize after startup\n"
"      --fail[=BOOL]                     Quit when startup fails\n"
"      --high-priority[=BOOL]            Try to set high nice level\n"
"                                        (only available as root, when SUID "
"or\n"
"                                        with elevated RLIMIT_NICE)\n"
"      --realtime[=BOOL]                 Try to enable realtime scheduling\n"
"                                        (only available as root, when SUID "
"or\n"
"                                        with elevated RLIMIT_RTPRIO)\n"
"      --disallow-module-loading[=BOOL]  Disallow module user requested "
"module\n"
"                                        loading/unloading after startup\n"
"      --disallow-exit[=BOOL]            Disallow user requested exit\n"
"      --exit-idle-time=SECS             Terminate the daemon when idle and "
"this\n"
"                                        time passed\n"
"      --scache-idle-time=SECS           Unload autoloaded samples when idle "
"and\n"
"                                        this time passed\n"
"      --log-level[=LEVEL]               Increase or set verbosity level\n"
"  -v                                    Increase the verbosity level\n"
"      --log-target={auto,syslog,stderr,file:PATH}\n"
"                                        Specify the log target\n"
"      --log-meta[=BOOL]                 Include code location in log "
"messages\n"
"      --log-time[=BOOL]                 Include timestamps in log messages\n"
"      --log-backtrace=FRAMES            Include a backtrace in log messages\n"
"  -p, --dl-search-path=PATH             Set the search path for dynamic "
"shared\n"
"                                        objects (plugins)\n"
"      --resample-method=METHOD          Use the specified resampling method\n"
"                                        (See --dump-resample-methods for\n"
"                                        possible values)\n"
"      --use-pid-file[=BOOL]             Create a PID file\n"
"      --no-cpu-limit[=BOOL]             Do not install CPU load limiter on\n"
"                                        platforms that support it.\n"
"      --disable-shm[=BOOL]              Disable shared memory support.\n"
"\n"
"STARTUP SCRIPT:\n"
"  -L, --load=\"MODULE ARGUMENTS\"         Load the specified plugin module "
"with\n"
"                                        the specified argument\n"
"  -F, --file=FILENAME                   Run the specified script\n"
"  -C                                    Open a command line on the running "
"TTY\n"
"                                        after startup\n"
"\n"
"  -n                                    Don't load default script file\n"
msgstr ""
"%s [options]\n"
"\n"
"COMMANDS:\n"
"  -h, --help                            显示此帮助\n"
"      --version                         显示版本号\n"
"      --dump-conf                       转储默认设置\n"
"      --dump-modules                    转储可用的模块列表\n"
"      --dump-resample-methods           转储可用的重采样方法\n"
"      --cleanup-shm                     清理滞留的共享内存段\n"
"      --start                           如果后台程序没有运行则启动后台程序\n"
"  -k  --kill                            杀死运行中的后台程序\n"
"      --check                           检查运行中的后台程序\n"
"\n"
"OPTIONS:\n"
"      --system[=BOOL]                   作为系统范围事件运行\n"
"  -D, --daemonize[=BOOL]                启动后转为后台运行\n"
"      --fail[=BOOL]                     启动失败则退出\n"
"      --high-priority[=BOOL]            尝试设定高nice level\n"
"                                        （仅以root运行时，处于SUID或者\n"
"                                        在RLIMIT_NICE提升时可用）\n"
"      --realtime[=BOOL]                 尝试启用实时调度\n"
"                                        （仅以root运行时，处于SUID或者\n"
"                                        在RLIMIT_PTPRIO提升时可用）\n"
"      --disallow-module-loading[=BOOL]  启动后不批准模块用户的\n"
"                                        加载／卸载请求\n"
"      --disallow-exit[=BOOL]            不批准用户的退出请求\n"
"      --exit-idle-time=SECS             空闲指定时长后终止后台程序\n"
"      --module-idle-time=SECS           空闲指定时长后卸载\n"
"                                        自动加载的模块\n"
"      --scache-idle-time=SECS           空闲指定时长后卸载\n"
"                                        自动加载的样品\n"
"      --log-level[=LEVEL]               提高或者设定verbosity level\n"
"  -v                                    提高verbosity level\n"
"      --log-target={auto,syslog,stderr} 提定日志目标\n"
"  -p, --dl-search-path=PATH             为动态共享对象（插件）设定\n"
"                                        搜索路径\n"
"      --resample-method=METHOD          使用指定的重采样方法\n"
"                                        (使用 --dump-resample-methods 查看\n"
"                                        可能的值)\n"
"      --use-pid-file[=BOOL]             创建一个PID文件\n"
"      --no-cpu-limit[=BOOL]             不在支持它的平台中安装 CPU 载入限制程"
"序。\n"
"                                              --disable-shm"
"[=BOOL]              禁用共享内存支持\n"
"\n"
"STARTUP SCRIPT:\n"
"  -L, --load=\"MODULE ARGUMENTS\"         用指令参数加载\n"
"                                        指定插件模块\n"
"  -F, --file=FILENAME                   运行指定脚本\n"
"  -C                                    启动后在运行的虚拟终端上\n"
"                                        打开命令行\n"
"\n"
"  -n                                    不加载默认的脚本文件\n"

#: ../src/daemon/cmdline.c:244
msgid "--daemonize expects boolean argument"
msgstr "--daemonize 期待布尔参数"

#: ../src/daemon/cmdline.c:251
msgid "--fail expects boolean argument"
msgstr "--fail 期待布尔参数"

#: ../src/daemon/cmdline.c:261
msgid ""
"--log-level expects log level argument (either numeric in range 0..4 or one "
"of debug, info, notice, warn, error)."
msgstr ""
"--log-level 期待日志级别参数（可以是数字0～4或者debug，info，notice，warn，"
"error中的一个）"

#: ../src/daemon/cmdline.c:273
msgid "--high-priority expects boolean argument"
msgstr "--high-priority 期待布尔参数"

#: ../src/daemon/cmdline.c:280
msgid "--realtime expects boolean argument"
msgstr "--realtime 期待布尔参数"

#: ../src/daemon/cmdline.c:287
msgid "--disallow-module-loading expects boolean argument"
msgstr "--disallow-module-loading 期待布尔参数"

#: ../src/daemon/cmdline.c:294
msgid "--disallow-exit expects boolean argument"
msgstr "--disallow-exit 需要布尔值参数"

#: ../src/daemon/cmdline.c:301
msgid "--use-pid-file expects boolean argument"
msgstr "--use-pid-file 期待布尔参数"

#: ../src/daemon/cmdline.c:318
#, fuzzy
msgid ""
"Invalid log target: use either 'syslog', 'stderr' or 'auto' or a valid file "
"name 'file:<path>'."
msgstr "无效的日志目标：从syslog，stderr和auto中选取一个"

#: ../src/daemon/cmdline.c:325
msgid "--log-time expects boolean argument"
msgstr "--log-time 需要布尔值参数"

#: ../src/daemon/cmdline.c:332
msgid "--log-meta expects boolean argument"
msgstr "--log-meta 需要布尔值参数"

#: ../src/daemon/cmdline.c:351
#, c-format
msgid "Invalid resample method '%s'."
msgstr "无效的重采样方法'%s'。"

#: ../src/daemon/cmdline.c:358
msgid "--system expects boolean argument"
msgstr "--system 期待布尔参数"

#: ../src/daemon/cmdline.c:365
msgid "--no-cpu-limit expects boolean argument"
msgstr "--no-cpu-limit 期待布尔参数"

#: ../src/daemon/cmdline.c:372
msgid "--disable-shm expects boolean argument"
msgstr "--disable-shm 期待布尔参数"

#: ../src/daemon/dumpmodules.c:59
#, c-format
msgid "Name: %s\n"
msgstr "名称：%s\n"

#: ../src/daemon/dumpmodules.c:62
#, c-format
msgid "No module information available\n"
msgstr "没有可用的模块信息\n"

#: ../src/daemon/dumpmodules.c:65
#, c-format
msgid "Version: %s\n"
msgstr "版本号：%s\n"

#: ../src/daemon/dumpmodules.c:67
#, c-format
msgid "Description: %s\n"
msgstr "描述：%s\n"

#: ../src/daemon/dumpmodules.c:69
#, c-format
msgid "Author: %s\n"
msgstr "作者：%s\n"

#: ../src/daemon/dumpmodules.c:71
#, c-format
msgid "Usage: %s\n"
msgstr "用法：%s\n"

#: ../src/daemon/dumpmodules.c:72
#, c-format
msgid "Load Once: %s\n"
msgstr "加载一次：%s\n"

#: ../src/daemon/dumpmodules.c:74
#, c-format
msgid "DEPRECATION WARNING: %s\n"
msgstr "反对警告：%s\n"

#: ../src/daemon/dumpmodules.c:78
#, c-format
msgid "Path: %s\n"
msgstr "路径：%s\n"

#: ../src/daemon/daemon-conf.c:275
#, c-format
msgid "[%s:%u] Invalid log target '%s'."
msgstr "[%s:%u] 无效的日志目标'%s'。"

#: ../src/daemon/daemon-conf.c:291
#, c-format
msgid "[%s:%u] Invalid log level '%s'."
msgstr "[%s:%u] 无效的日志级别'%s'。"

#: ../src/daemon/daemon-conf.c:307
#, c-format
msgid "[%s:%u] Invalid resample method '%s'."
msgstr "[%s:%u] 无效的重采样方法'%s'。"

#: ../src/daemon/daemon-conf.c:330
#, c-format
msgid "[%s:%u] Invalid rlimit '%s'."
msgstr "[%s:%u] 无效的rlimit '%s'。"

#: ../src/daemon/daemon-conf.c:351
#, c-format
msgid "[%s:%u] Invalid sample format '%s'."
msgstr "[%s:%u] 无效的样品格式'%s'。"

#: ../src/daemon/daemon-conf.c:370 ../src/daemon/daemon-conf.c:389
#, c-format
msgid "[%s:%u] Invalid sample rate '%s'."
msgstr "[%s:%u] 无效的样品率'%s'。"

#: ../src/daemon/daemon-conf.c:413
#, c-format
msgid "[%s:%u] Invalid sample channels '%s'."
msgstr "[%s:%u] 无效的样品通道'%s'。"

#: ../src/daemon/daemon-conf.c:431
#, c-format
msgid "[%s:%u] Invalid channel map '%s'."
msgstr "[%s:%u] 无效频道地图 '%s'。"

#: ../src/daemon/daemon-conf.c:449
#, c-format
msgid "[%s:%u] Invalid number of fragments '%s'."
msgstr "[%s:%u] 无效的分段数'%s'。"

#: ../src/daemon/daemon-conf.c:467
#, c-format
msgid "[%s:%u] Invalid fragment size '%s'."
msgstr "[%s:%u] 无效的分段大小'%s'。"

#: ../src/daemon/daemon-conf.c:485
#, c-format
msgid "[%s:%u] Invalid nice level '%s'."
msgstr "[%s:%u] 无效的nice level '%s'。"

#: ../src/daemon/daemon-conf.c:528
#, fuzzy, c-format
msgid "[%s:%u] Invalid server type '%s'."
msgstr "[%s:%u] 无效的样品率'%s'。"

#: ../src/daemon/daemon-conf.c:641
#, c-format
msgid "Failed to open configuration file: %s"
msgstr "打开配置文件失败：%s"

#: ../src/daemon/daemon-conf.c:657
msgid ""
"The specified default channel map has a different number of channels than "
"the specified default number of channels."
msgstr "指定的默认频道地图的频道数与指定的默认频道数不同。"

#: ../src/daemon/daemon-conf.c:743
#, c-format
msgid "### Read from configuration file: %s ###\n"
msgstr "### 从配置文件读取：%s ###\n"

#: ../src/daemon/caps.c:58
msgid "Cleaning up privileges."
msgstr "取消特权。"

#: ../src/daemon/pulseaudio.desktop.in.h:1
msgid "PulseAudio Sound System"
msgstr "PulseAudio 声音系统"

#: ../src/daemon/pulseaudio.desktop.in.h:2
msgid "Start the PulseAudio Sound System"
msgstr "启动 PulseAudio 声音系统"

#: ../src/daemon/pulseaudio-kde.desktop.in.h:1
#, fuzzy
msgid "PulseAudio Sound System KDE Routing Policy"
msgstr "PulseAudio 声音系统"

#: ../src/daemon/pulseaudio-kde.desktop.in.h:2
#, fuzzy
msgid "Start the PulseAudio Sound System with KDE Routing Policy"
msgstr "启动 PulseAudio 声音系统"

#: ../src/pulse/channelmap.c:105 ../src/pulse/channelmap.c:757
msgid "Mono"
msgstr "单声道"

#: ../src/pulse/channelmap.c:107
msgid "Front Center"
msgstr "中前"

#: ../src/pulse/channelmap.c:108
msgid "Front Left"
msgstr "左前"

#: ../src/pulse/channelmap.c:109
msgid "Front Right"
msgstr "右前"

#: ../src/pulse/channelmap.c:111
msgid "Rear Center"
msgstr "中后"

#: ../src/pulse/channelmap.c:112
msgid "Rear Left"
msgstr "左后"

#: ../src/pulse/channelmap.c:113
msgid "Rear Right"
msgstr "右后"

#: ../src/pulse/channelmap.c:115
msgid "Subwoofer"
msgstr ""

#: ../src/pulse/channelmap.c:117
msgid "Front Left-of-center"
msgstr "前左中央"

#: ../src/pulse/channelmap.c:118
msgid "Front Right-of-center"
msgstr "前右中央"

#: ../src/pulse/channelmap.c:120
msgid "Side Left"
msgstr "左侧"

#: ../src/pulse/channelmap.c:121
msgid "Side Right"
msgstr "右侧"

#: ../src/pulse/channelmap.c:123
msgid "Auxiliary 0"
msgstr "辅助 0"

#: ../src/pulse/channelmap.c:124
msgid "Auxiliary 1"
msgstr "辅助 1"

#: ../src/pulse/channelmap.c:125
msgid "Auxiliary 2"
msgstr "辅助 2"

#: ../src/pulse/channelmap.c:126
msgid "Auxiliary 3"
msgstr "辅助 3"

#: ../src/pulse/channelmap.c:127
msgid "Auxiliary 4"
msgstr "辅助 4"

#: ../src/pulse/channelmap.c:128
msgid "Auxiliary 5"
msgstr "辅助 5"

#: ../src/pulse/channelmap.c:129
msgid "Auxiliary 6"
msgstr "辅助 6"

#: ../src/pulse/channelmap.c:130
msgid "Auxiliary 7"
msgstr "辅助 7"

#: ../src/pulse/channelmap.c:131
msgid "Auxiliary 8"
msgstr "辅助 7"

#: ../src/pulse/channelmap.c:132
msgid "Auxiliary 9"
msgstr "辅助 9"

#: ../src/pulse/channelmap.c:133
msgid "Auxiliary 10"
msgstr "辅助 10"

#: ../src/pulse/channelmap.c:134
msgid "Auxiliary 11"
msgstr "辅助 11"

#: ../src/pulse/channelmap.c:135
msgid "Auxiliary 12"
msgstr "辅助 12"

#: ../src/pulse/channelmap.c:136
msgid "Auxiliary 13"
msgstr "辅助 13"

#: ../src/pulse/channelmap.c:137
msgid "Auxiliary 14"
msgstr "辅助 14"

#: ../src/pulse/channelmap.c:138
msgid "Auxiliary 15"
msgstr "辅助 15"

#: ../src/pulse/channelmap.c:139
msgid "Auxiliary 16"
msgstr "辅助 16"

#: ../src/pulse/channelmap.c:140
msgid "Auxiliary 17"
msgstr "辅助 17"

#: ../src/pulse/channelmap.c:141
msgid "Auxiliary 18"
msgstr "辅助 18"

#: ../src/pulse/channelmap.c:142
msgid "Auxiliary 19"
msgstr "辅助 19"

#: ../src/pulse/channelmap.c:143
msgid "Auxiliary 20"
msgstr "辅助 20"

#: ../src/pulse/channelmap.c:144
msgid "Auxiliary 21"
msgstr "辅助 21"

#: ../src/pulse/channelmap.c:145
msgid "Auxiliary 22"
msgstr "辅助 22"

#: ../src/pulse/channelmap.c:146
msgid "Auxiliary 23"
msgstr "辅助 23"

#: ../src/pulse/channelmap.c:147
msgid "Auxiliary 24"
msgstr "辅助 24"

#: ../src/pulse/channelmap.c:148
msgid "Auxiliary 25"
msgstr "辅助 25"

#: ../src/pulse/channelmap.c:149
msgid "Auxiliary 26"
msgstr "辅助 26"

#: ../src/pulse/channelmap.c:150
msgid "Auxiliary 27"
msgstr "辅助 27"

#: ../src/pulse/channelmap.c:151
msgid "Auxiliary 28"
msgstr "辅助 28"

#: ../src/pulse/channelmap.c:152
msgid "Auxiliary 29"
msgstr "辅助 29"

#: ../src/pulse/channelmap.c:153
msgid "Auxiliary 30"
msgstr "辅助 30"

#: ../src/pulse/channelmap.c:154
msgid "Auxiliary 31"
msgstr "辅助 31"

#: ../src/pulse/channelmap.c:156
msgid "Top Center"
msgstr "上中"

#: ../src/pulse/channelmap.c:158
msgid "Top Front Center"
msgstr "上中前"

#: ../src/pulse/channelmap.c:159
msgid "Top Front Left"
msgstr "上左前"

#: ../src/pulse/channelmap.c:160
msgid "Top Front Right"
msgstr "上右前"

#: ../src/pulse/channelmap.c:162
msgid "Top Rear Center"
msgstr "上中后"

#: ../src/pulse/channelmap.c:163
msgid "Top Rear Left"
msgstr "上左后"

#: ../src/pulse/channelmap.c:164
msgid "Top Rear Right"
msgstr "上右后"

#: ../src/pulse/channelmap.c:484 ../src/pulse/sample.c:169
#: ../src/pulse/volume.c:297 ../src/pulse/volume.c:323
#: ../src/pulse/volume.c:343 ../src/pulse/volume.c:373
#: ../src/pulse/format.c:125
msgid "(invalid)"
msgstr "（无效）"

#: ../src/pulse/channelmap.c:761
msgid "Stereo"
msgstr "立体声"

#: ../src/pulse/channelmap.c:766
msgid "Surround 4.0"
msgstr "环绕 4.0 "

#: ../src/pulse/channelmap.c:772
msgid "Surround 4.1"
msgstr "环绕 4.1"

#: ../src/pulse/channelmap.c:778
msgid "Surround 5.0"
msgstr "环绕 5.0"

#: ../src/pulse/channelmap.c:784
msgid "Surround 5.1"
msgstr "环绕 5.1"

#: ../src/pulse/channelmap.c:791
msgid "Surround 7.1"
msgstr "环绕 7.1"

#: ../src/pulse/error.c:40
msgid "OK"
msgstr "确定"

#: ../src/pulse/error.c:41
msgid "Access denied"
msgstr "拒绝访问"

#: ../src/pulse/error.c:42
msgid "Unknown command"
msgstr "未知命令"

#: ../src/pulse/error.c:43
msgid "Invalid argument"
msgstr "无效参数"

#: ../src/pulse/error.c:44
msgid "Entity exists"
msgstr "实体存在"

#: ../src/pulse/error.c:45
msgid "No such entity"
msgstr "没有该实体"

#: ../src/pulse/error.c:46
msgid "Connection refused"
msgstr "拒绝连接"

#: ../src/pulse/error.c:47
msgid "Protocol error"
msgstr "协议错误"

#: ../src/pulse/error.c:48
msgid "Timeout"
msgstr "超时"

#: ../src/pulse/error.c:49
msgid "No authorization key"
msgstr "没有授权密钥"

#: ../src/pulse/error.c:50
msgid "Internal error"
msgstr "内部错误"

#: ../src/pulse/error.c:51
msgid "Connection terminated"
msgstr "连接终止"

#: ../src/pulse/error.c:52
msgid "Entity killed"
msgstr "实体已杀死"

#: ../src/pulse/error.c:53
msgid "Invalid server"
msgstr "无效服务器"

#: ../src/pulse/error.c:54
msgid "Module initialization failed"
msgstr "模块初始化失败"

#: ../src/pulse/error.c:55
msgid "Bad state"
msgstr "坏状态"

#: ../src/pulse/error.c:56
msgid "No data"
msgstr "没有数据"

#: ../src/pulse/error.c:57
msgid "Incompatible protocol version"
msgstr "不兼容的协议版本"

#: ../src/pulse/error.c:58
msgid "Too large"
msgstr "太大"

#: ../src/pulse/error.c:59
msgid "Not supported"
msgstr "不支持"

#: ../src/pulse/error.c:60
msgid "Unknown error code"
msgstr "未知错误码"

#: ../src/pulse/error.c:61
msgid "No such extension"
msgstr "没有该扩展"

#: ../src/pulse/error.c:62
msgid "Obsolete functionality"
msgstr "废弃的功能性"

#: ../src/pulse/error.c:63
msgid "Missing implementation"
msgstr "缺少部署"

#: ../src/pulse/error.c:64
msgid "Client forked"
msgstr "客户端分支"

#: ../src/pulse/error.c:65
msgid "Input/Output error"
msgstr "输入/输出错误"

#: ../src/pulse/error.c:66
msgid "Device or resource busy"
msgstr "设备或者资源忙"

#: ../src/pulse/sample.c:171
#, c-format
msgid "%s %uch %uHz"
msgstr "%s %uch %uHz"

#: ../src/pulse/sample.c:183
#, c-format
msgid "%0.1f GiB"
msgstr "%0.1f GiB"

#: ../src/pulse/sample.c:185
#, c-format
msgid "%0.1f MiB"
msgstr "%0.1f MiB"

#: ../src/pulse/sample.c:187
#, c-format
msgid "%0.1f KiB"
msgstr "%0.1f KiB"

#: ../src/pulse/sample.c:189
#, c-format
msgid "%u B"
msgstr "%u B"

#: ../src/pulse/client-conf-x11.c:54 ../src/utils/pax11publish.c:100
#, fuzzy
msgid "xcb_connect() failed"
msgstr "pa_context_connect()失败：%s"

#: ../src/pulse/client-conf-x11.c:59 ../src/utils/pax11publish.c:105
msgid "xcb_connection_has_error() returned true"
msgstr ""

#: ../src/pulse/client-conf-x11.c:97
msgid "Failed to parse cookie data"
msgstr "cookie数据分析失败"

#: ../src/pulse/client-conf.c:117
#, c-format
msgid "Failed to open configuration file '%s': %s"
msgstr "打开配置文件'%s'失败：%s"

#: ../src/pulse/context.c:528
msgid "No cookie loaded. Attempting to connect without."
msgstr "没有加载cookie。尝试不加载cookie进行连接。"

#: ../src/pulse/context.c:675
#, c-format
msgid "fork(): %s"
msgstr "fork()：%s"

#: ../src/pulse/context.c:730
#, c-format
msgid "waitpid(): %s"
msgstr "waitpid()：%s"

#: ../src/pulse/context.c:1431
#, c-format
msgid "Received message for unknown extension '%s'"
msgstr "收到未知扩展'%s'的信息"

#: ../src/utils/pacat.c:112
#, c-format
msgid "Failed to drain stream: %s"
msgstr "排出流失败：%s"

#: ../src/utils/pacat.c:117
msgid "Playback stream drained."
msgstr "回放流枯竭。"

#: ../src/utils/pacat.c:128
msgid "Draining connection to server."
msgstr "到服务器的 Draining 连接。"

#: ../src/utils/pacat.c:141
#, c-format
msgid "pa_stream_drain(): %s"
msgstr "pa_stream_drain(): %s"

#: ../src/utils/pacat.c:164
#, c-format
msgid "pa_stream_write() failed: %s"
msgstr "pa_stream_write() failed: %s"

#: ../src/utils/pacat.c:205
#, c-format
msgid "pa_stream_begin_write() failed: %s"
msgstr "pa_stream_begin_write() failed: %s"

#: ../src/utils/pacat.c:255 ../src/utils/pacat.c:285
#, c-format
msgid "pa_stream_peek() failed: %s"
msgstr "pa_stream_peek() failed: %s"

#: ../src/utils/pacat.c:325
msgid "Stream successfully created."
msgstr "流创建成功。"

#: ../src/utils/pacat.c:328
#, c-format
msgid "pa_stream_get_buffer_attr() failed: %s"
msgstr "pa_stream_get_buffer_attr() failed: %s"

#: ../src/utils/pacat.c:332
#, c-format
msgid "Buffer metrics: maxlength=%u, tlength=%u, prebuf=%u, minreq=%u"
msgstr "Buffer metrics: maxlength=%u, tlength=%u, prebuf=%u, minreq=%u"

#: ../src/utils/pacat.c:335
#, c-format
msgid "Buffer metrics: maxlength=%u, fragsize=%u"
msgstr "Buffer metrics: maxlength=%u, fragsize=%u"

#: ../src/utils/pacat.c:339
#, c-format
msgid "Using sample spec '%s', channel map '%s'."
msgstr "正在使用样品规格 '%s'，通道映射 '%s'。"

#: ../src/utils/pacat.c:343
#, c-format
msgid "Connected to device %s (%u, %ssuspended)."
msgstr "已连接至设备 %s (%u，%s 挂起）。"

#: ../src/utils/pacat.c:353
#, c-format
msgid "Stream error: %s"
msgstr "流错误：%s"

#: ../src/utils/pacat.c:363
#, c-format
msgid "Stream device suspended.%s"
msgstr "流设备挂起。%s"

#: ../src/utils/pacat.c:365
#, c-format
msgid "Stream device resumed.%s"
msgstr "流设备恢复。%s"

#: ../src/utils/pacat.c:373
#, c-format
msgid "Stream underrun.%s"
msgstr "流欠载运行。%s"

#: ../src/utils/pacat.c:380
#, c-format
msgid "Stream overrun.%s"
msgstr "流超限运行。%s"

#: ../src/utils/pacat.c:387
#, c-format
msgid "Stream started.%s"
msgstr "流已启动。%s"

#: ../src/utils/pacat.c:394
#, c-format
msgid "Stream moved to device %s (%u, %ssuspended).%s"
msgstr "流移至设备 %s （%u，%s 挂起）。%s"

#: ../src/utils/pacat.c:394
msgid "not "
msgstr "not "

#: ../src/utils/pacat.c:401
#, c-format
msgid "Stream buffer attributes changed.%s"
msgstr "更改流缓冲属性。%s"

#: ../src/utils/pacat.c:416
msgid "Cork request stack is empty: corking stream"
msgstr ""

#: ../src/utils/pacat.c:422
msgid "Cork request stack is empty: uncorking stream"
msgstr ""

#: ../src/utils/pacat.c:426
msgid "Warning: Received more uncork requests than cork requests!"
msgstr ""

#: ../src/utils/pacat.c:451
#, c-format
msgid "Connection established.%s"
msgstr "连接已建立。%s "

#: ../src/utils/pacat.c:454
#, c-format
msgid "pa_stream_new() failed: %s"
msgstr "pa_stream_new() failed: %s"

#: ../src/utils/pacat.c:492
#, c-format
msgid "pa_stream_connect_playback() failed: %s"
msgstr "pa_stream_connect_playback() failed: %s"

#: ../src/utils/pacat.c:498
#, c-format
msgid "pa_stream_connect_record() failed: %s"
msgstr "pa_stream_connect_record() failed: %s"

#: ../src/utils/pacat.c:512 ../src/utils/pactl.c:1252
#, c-format
msgid "Connection failure: %s"
msgstr "连接失败：%s"

#: ../src/utils/pacat.c:545
msgid "Got EOF."
msgstr "获得 EOF。"

#: ../src/utils/pacat.c:582
#, c-format
msgid "write() failed: %s"
msgstr "写入（）失败：%s"

#: ../src/utils/pacat.c:603
msgid "Got signal, exiting."
msgstr "收到信号，正在退出。"

#: ../src/utils/pacat.c:617
#, c-format
msgid "Failed to get latency: %s"
msgstr "获取传输延迟失败：%s"

#: ../src/utils/pacat.c:622
#, c-format
msgid "Time: %0.3f sec; Latency: %0.0f usec."
msgstr "时间：%0.3f 秒；延迟：%0.0f 微秒。"

#: ../src/utils/pacat.c:643
#, c-format
msgid "pa_stream_update_timing_info() failed: %s"
msgstr "pa_stream_update_timing_info() failed: %s"

#: ../src/utils/pacat.c:653
#, fuzzy, c-format
msgid ""
"%s [options]\n"
"\n"
"  -h, --help                            Show this help\n"
"      --version                         Show version\n"
"\n"
"  -r, --record                          Create a connection for recording\n"
"  -p, --playback                        Create a connection for playback\n"
"\n"
"  -v, --verbose                         Enable verbose operations\n"
"\n"
"  -s, --server=SERVER                   The name of the server to connect "
"to\n"
"  -d, --device=DEVICE                   The name of the sink/source to "
"connect to\n"
"  -n, --client-name=NAME                How to call this client on the "
"server\n"
"      --stream-name=NAME                How to call this stream on the "
"server\n"
"      --volume=VOLUME                   Specify the initial (linear) volume "
"in range 0...65536\n"
"      --rate=SAMPLERATE                 The sample rate in Hz (defaults to "
"44100)\n"
"      --format=SAMPLEFORMAT             The sample type, one of s16le, "
"s16be, u8, float32le,\n"
"                                        float32be, ulaw, alaw, s32le, s32be, "
"s24le, s24be,\n"
"                                        s24-32le, s24-32be (defaults to "
"s16ne)\n"
"      --channels=CHANNELS               The number of channels, 1 for mono, "
"2 for stereo\n"
"                                        (defaults to 2)\n"
"      --channel-map=CHANNELMAP          Channel map to use instead of the "
"default\n"
"      --fix-format                      Take the sample format from the sink "
"the stream is\n"
"                                        being connected to.\n"
"      --fix-rate                        Take the sampling rate from the sink "
"the stream is\n"
"                                        being connected to.\n"
"      --fix-channels                    Take the number of channels and the "
"channel map\n"
"                                        from the sink the stream is being "
"connected to.\n"
"      --no-remix                        Don't upmix or downmix channels.\n"
"      --no-remap                        Map channels by index instead of "
"name.\n"
"      --latency=BYTES                   Request the specified latency in "
"bytes.\n"
"      --process-time=BYTES              Request the specified process time "
"per request in bytes.\n"
"      --latency-msec=MSEC               Request the specified latency in "
"msec.\n"
"      --process-time-msec=MSEC          Request the specified process time "
"per request in msec.\n"
"      --property=PROPERTY=VALUE         Set the specified property to the "
"specified value.\n"
"      --raw                             Record/play raw PCM data.\n"
"      --passthrough                     passthrough data \n"
"      --file-format[=FFORMAT]           Record/play formatted PCM data.\n"
"      --list-file-formats               List available file formats.\n"
msgstr ""
"%s [options]\n"
"\n"
"  -h, --help                            显示此帮助\n"
"      --version                         显示版本\n"
"\n"
"  -r, --record                          为录制创建连接\n"
"  -p, --playback                        为回放创建连接\n"
"\n"
"  -v, --verbose                         启用详述操作\n"
"\n"
"  -s, --server=SERVER                   要连接的服务器名\n"
"  -d, --device=DEVICE                   要连接的漏/源名称\n"
"  -n, --client-name=NAME                如何在服务器中调用此客户端\n"
"      --stream-name=NAME                如何在服务器中调用这个流\n"
"      --volume=VOLUME                   指定初始（线性）音量，取值在0...65536"
"之间\n"
"      --rate=SAMPLERATE                 采样频率（单位 Hz，默认为44100）\n"
"      --format=SAMPLEFORMAT             采样类型，s16le、s16be、u8、"
"float32le 之一\n"
"                                        float32be、ulaw、alaw、s32le、s32be "
"中取（默认为 s16ne）\n"
"      --channels=CHANNELS               通道数，1为单声道，2为立体声（默认为"
"2）\n"
"      --channel-map=CHANNELMAP          取代默认值的通道映射表\n"
"      --fix-format                      从流连接的漏中提取采样格式。\n"
"      --fix-rate                        从流连接的漏中提取采样率。\n"
"      --fix-channels                    从流连接的漏中提取通道数和通道映射"
"表。\n"
"      --no-remix                        不要对通道进行 upmix 或者 downmix 操"
"作。\n"
"      --no-remap                        根据下标而非名称来映射通道。\n"
"      --latency=BYTES                   请求指定字节数的延迟。\n"
"      --process-time=BYTES              每次请求指定字节数的处理时间。\n"

#: ../src/utils/pacat.c:786
#, c-format
msgid ""
"pacat %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"
msgstr ""
"pacat %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"

#: ../src/utils/pacat.c:819 ../src/utils/pactl.c:1400
#, c-format
msgid "Invalid client name '%s'"
msgstr "无效客户端名称 '%s'"

#: ../src/utils/pacat.c:834
#, c-format
msgid "Invalid stream name '%s'"
msgstr "无效流名称 '%s'"

#: ../src/utils/pacat.c:871
#, c-format
msgid "Invalid channel map '%s'"
msgstr "无效通道映射 '%s'"

#: ../src/utils/pacat.c:900 ../src/utils/pacat.c:914
#, c-format
msgid "Invalid latency specification '%s'"
msgstr "无效延迟说明 %s'"

#: ../src/utils/pacat.c:907 ../src/utils/pacat.c:921
#, c-format
msgid "Invalid process time specification '%s'"
msgstr "无效处理时间说明 '%s'"

#: ../src/utils/pacat.c:933
#, c-format
msgid "Invalid property '%s'"
msgstr "无效性能 '%s'"

#: ../src/utils/pacat.c:952
#, c-format
msgid "Unknown file format %s."
msgstr "未知文件格式 %s。"

#: ../src/utils/pacat.c:971
msgid "Invalid sample specification"
msgstr "无效采样说明"

#: ../src/utils/pacat.c:981
#, c-format
msgid "open(): %s"
msgstr "open(): %s"

#: ../src/utils/pacat.c:986
#, c-format
msgid "dup2(): %s"
msgstr "dup2(): %s"

#: ../src/utils/pacat.c:993
msgid "Too many arguments."
msgstr "参数过多。"

#: ../src/utils/pacat.c:1004
msgid "Failed to generate sample specification for file."
msgstr "为文件获取采样说明失败。"

#: ../src/utils/pacat.c:1030
msgid "Failed to open audio file."
msgstr "打开声音文件失败。"

#: ../src/utils/pacat.c:1036
msgid ""
"Warning: specified sample specification will be overwritten with "
"specification from file."
msgstr "警告：指定的采样说明将覆盖文件中的说明。"

#: ../src/utils/pacat.c:1039 ../src/utils/pactl.c:1467
msgid "Failed to determine sample specification from file."
msgstr "从文件中确定采样说明失败。"

#: ../src/utils/pacat.c:1048
msgid "Warning: Failed to determine channel map from file."
msgstr "警告：从文件中确定通道映射失败。"

#: ../src/utils/pacat.c:1059
msgid "Channel map doesn't match sample specification"
msgstr "通道映射与采样说明不匹配"

#: ../src/utils/pacat.c:1070
msgid "Warning: failed to write channel map to file."
msgstr "警告：在文件中写入通道映射失败。"

#: ../src/utils/pacat.c:1085
#, c-format
msgid ""
"Opening a %s stream with sample specification '%s' and channel map '%s'."
msgstr "使用采样说明 '%s' 和通道映射 '%s' 打开 %s 流。"

#: ../src/utils/pacat.c:1086
msgid "recording"
msgstr "正在录制"

#: ../src/utils/pacat.c:1086
msgid "playback"
msgstr "回放"

#: ../src/utils/pacat.c:1110
#, fuzzy
msgid "Failed to set media name."
msgstr "分析命令行失败。"

#: ../src/utils/pacat.c:1117 ../src/utils/pactl.c:1777
msgid "pa_mainloop_new() failed."
msgstr "pa_mainloop_new() failed."

#: ../src/utils/pacat.c:1136
msgid "io_new() failed."
msgstr "io_new() failed."

#: ../src/utils/pacat.c:1143 ../src/utils/pactl.c:1789
msgid "pa_context_new() failed."
msgstr "pa_context_new() failed."

#: ../src/utils/pacat.c:1151 ../src/utils/pactl.c:1795
#, c-format
msgid "pa_context_connect() failed: %s"
msgstr "pa_context_connect()失败：%s"

#: ../src/utils/pacat.c:1157
msgid "pa_context_rttime_new() failed."
msgstr "pa_context_rttime_new() failed."

#: ../src/utils/pacat.c:1164 ../src/utils/pactl.c:1800
msgid "pa_mainloop_run() failed."
msgstr "pa_mainloop_run() failed."

#: ../src/utils/pasuspender.c:79
#, c-format
msgid "fork(): %s\n"
msgstr "fork()：%s\n"

#: ../src/utils/pasuspender.c:90
#, c-format
msgid "execvp(): %s\n"
msgstr "execvp()：%s\n"

#: ../src/utils/pasuspender.c:107
#, c-format
msgid "Failure to suspend: %s\n"
msgstr "挂起失败：%s\n"

#: ../src/utils/pasuspender.c:122
#, c-format
msgid "Failure to resume: %s\n"
msgstr "恢复失败：%s\n"

#: ../src/utils/pasuspender.c:145
#, c-format
msgid "WARNING: Sound server is not local, not suspending.\n"
msgstr "警告：非本地声音服务器，不会挂起。\n"

#: ../src/utils/pasuspender.c:157
#, c-format
msgid "Connection failure: %s\n"
msgstr "连接失败：%s\n"

#: ../src/utils/pasuspender.c:174
#, c-format
msgid "Got SIGINT, exiting.\n"
msgstr "收到SIGINT，正在退出。\n"

#: ../src/utils/pasuspender.c:192
#, c-format
msgid "WARNING: Child process terminated by signal %u\n"
msgstr "警告：子进程被信号%u终止\n"

#: ../src/utils/pasuspender.c:210
#, c-format
msgid ""
"%s [options] ... \n"
"\n"
"  -h, --help                            Show this help\n"
"      --version                         Show version\n"
"  -s, --server=SERVER                   The name of the server to connect "
"to\n"
"\n"
msgstr ""
"%s [options] ... \n"
"\n"
"  -h, --help                            显示此帮助\n"
"      --version                         显示版本\n"
"  -s, --server=SERVER                   要连接的服务器名\n"
"\n"

#: ../src/utils/pasuspender.c:248
#, c-format
msgid ""
"pasuspender %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"
msgstr ""
"pasuspender %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"

#: ../src/utils/pasuspender.c:277
#, c-format
msgid "pa_mainloop_new() failed.\n"
msgstr "pa_mainloop_new()失败。\n"

#: ../src/utils/pasuspender.c:290
#, c-format
msgid "pa_context_new() failed.\n"
msgstr "pa_context_new()失败。\n"

#: ../src/utils/pasuspender.c:298
#, c-format
msgid "pa_mainloop_run() failed.\n"
msgstr "pa_mainloop_run()失败。\n"

#: ../src/utils/pactl.c:150
#, c-format
msgid "Failed to get statistics: %s"
msgstr "获取统计数据失败：%s"

#: ../src/utils/pactl.c:156
#, c-format
msgid "Currently in use: %u blocks containing %s bytes total.\n"
msgstr "当前使用：%u块，总共%s字节。\n"

#: ../src/utils/pactl.c:159
#, c-format
msgid "Allocated during whole lifetime: %u blocks containing %s bytes total.\n"
msgstr "整个生命周期所得分配：%u块，总共%s字节。\n"

#: ../src/utils/pactl.c:162
#, c-format
msgid "Sample cache size: %s\n"
msgstr "采样缓存大小：%s\n"

#: ../src/utils/pactl.c:171
#, c-format
msgid "Failed to get server information: %s"
msgstr "获取服务器信息失败：%s"

#: ../src/utils/pactl.c:176
#, c-format
msgid ""
"Server String: %s\n"
"Library Protocol Version: %u\n"
"Server Protocol Version: %u\n"
"Is Local: %s\n"
"Client Index: %u\n"
"Tile Size: %zu\n"
msgstr ""

#: ../src/utils/pactl.c:192
#, fuzzy, c-format
msgid ""
"User Name: %s\n"
"Host Name: %s\n"
"Server Name: %s\n"
"Server Version: %s\n"
"Default Sample Specification: %s\n"
"Default Channel Map: %s\n"
"Default Sink: %s\n"
"Default Source: %s\n"
"Cookie: %04x:%04x\n"
msgstr ""
"用户名：%s\n"
"主机名：%s\n"
"服务器名：%s\n"
"服务器版本：%s\n"
"默认采样规格：%s\n"
"默认频道地图：%s\n"
"默认音频入口：%s\n"
"默认源： %s\n"
"Cookie：%08x\n"

#: ../src/utils/pactl.c:244 ../src/utils/pactl.c:830
#, c-format
msgid "Failed to get sink information: %s"
msgstr "获取音频出口信息失败：%s"

#: ../src/utils/pactl.c:270
#, fuzzy, c-format
msgid ""
"Sink #%u\n"
"\tState: %s\n"
"\tName: %s\n"
"\tDescription: %s\n"
"\tDriver: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tOwner Module: %u\n"
"\tMute: %s\n"
"\tVolume: %s%s%s\n"
"\t        balance %0.2f\n"
"\tBase Volume: %s%s%s\n"
"\tMonitor Source: %s\n"
"\tLatency: %0.0f usec, configured %0.0f usec\n"
"\tFlags: %s%s%s%s%s%s%s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Sink #%u\n"
"\tState: %s\n"
"\tName: %s\n"
"\tDescription: %s\n"
"\tDriver: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tOwner Module: %u\n"
"\tMute: %s\n"
"\tVolume: %s%s%s\n"
"\t        balance %0.2f\n"
"\tBase Volume: %s%s%s\n"
"\tMonitor Source: %s\n"
"\tLatency: %0.0f usec, configured %0.0f usec\n"
"\tFlags: %s%s%s%s%s%s\n"
"\tProperties:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:318 ../src/utils/pactl.c:430
#, c-format
msgid "\tPorts:\n"
msgstr "\tPorts:\n"

#: ../src/utils/pactl.c:325 ../src/utils/pactl.c:437
#, c-format
msgid "\tActive Port: %s\n"
msgstr "\tActive Port: %s\n"

#: ../src/utils/pactl.c:331 ../src/utils/pactl.c:443
#, fuzzy, c-format
msgid "\tFormats:\n"
msgstr "\tPorts:\n"

#: ../src/utils/pactl.c:357 ../src/utils/pactl.c:849
#, c-format
msgid "Failed to get source information: %s"
msgstr "获取音频入口信息失败：%s"

#: ../src/utils/pactl.c:383
#, c-format
msgid ""
"Source #%u\n"
"\tState: %s\n"
"\tName: %s\n"
"\tDescription: %s\n"
"\tDriver: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tOwner Module: %u\n"
"\tMute: %s\n"
"\tVolume: %s%s%s\n"
"\t        balance %0.2f\n"
"\tBase Volume: %s%s%s\n"
"\tMonitor of Sink: %s\n"
"\tLatency: %0.0f usec, configured %0.0f usec\n"
"\tFlags: %s%s%s%s%s%s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Source #%u\n"
"\tState: %s\n"
"\tName: %s\n"
"\tDescription: %s\n"
"\tDriver: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tOwner Module: %u\n"
"\tMute: %s\n"
"\tVolume: %s%s%s\n"
"\t        balance %0.2f\n"
"\tBase Volume: %s%s%s\n"
"\tMonitor of Sink: %s\n"
"\tLatency: %0.0f usec, configured %0.0f usec\n"
"\tFlags: %s%s%s%s%s%s\n"
"\tProperties:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:415 ../src/utils/pactl.c:485 ../src/utils/pactl.c:528
#: ../src/utils/pactl.c:570 ../src/utils/pactl.c:640 ../src/utils/pactl.c:641
#: ../src/utils/pactl.c:652 ../src/utils/pactl.c:711 ../src/utils/pactl.c:712
#: ../src/utils/pactl.c:723 ../src/utils/pactl.c:775 ../src/utils/pactl.c:776
#: ../src/utils/pactl.c:783
msgid "n/a"
msgstr "n/a"

#: ../src/utils/pactl.c:454
#, c-format
msgid "Failed to get module information: %s"
msgstr "获取模块信息失败：%s"

#: ../src/utils/pactl.c:477
#, c-format
msgid ""
"Module #%u\n"
"\tName: %s\n"
"\tArgument: %s\n"
"\tUsage counter: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Module #%u\n"
"\tName: %s\n"
"\tArgument: %s\n"
"\tUsage counter: %s\n"
"\tProperties:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:496
#, c-format
msgid "Failed to get client information: %s"
msgstr "获取客户端信息失败：%s"

#: ../src/utils/pactl.c:522
#, c-format
msgid ""
"Client #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Client #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tProperties:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:539
#, c-format
msgid "Failed to get card information: %s"
msgstr "获取声卡信息失败：%s"

#: ../src/utils/pactl.c:562
#, c-format
msgid ""
"Card #%u\n"
"\tName: %s\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Card #%u\n"
"\tName: %s\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tProperties:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:576
#, c-format
msgid "\tProfiles:\n"
msgstr "\tProfiles:\n"

#: ../src/utils/pactl.c:582
#, c-format
msgid "\tActive Profile: %s\n"
msgstr "\tActive Profile: %s\n"

#: ../src/utils/pactl.c:593 ../src/utils/pactl.c:868
#, c-format
msgid "Failed to get sink input information: %s"
msgstr "获取音频出口输入信息失败：%s"

#: ../src/utils/pactl.c:622
#, fuzzy, c-format
msgid ""
"Sink Input #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tClient: %s\n"
"\tSink: %u\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tFormat: %s\n"
"\tMute: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        balance %0.2f\n"
"\tBuffer Latency: %0.0f usec\n"
"\tSink Latency: %0.0f usec\n"
"\tResample method: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Sink Input #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tClient: %s\n"
"\tSink: %u\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tMute: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        balance %0.2f\n"
"\tBuffer Latency: %0.0f usec\n"
"\tSink Latency: %0.0f usec\n"
"\tResample method: %s\n"
"\tProperties:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:663 ../src/utils/pactl.c:887
#, c-format
msgid "Failed to get source output information: %s"
msgstr "获取音频入口输出信息失败：%s"

#: ../src/utils/pactl.c:693
#, fuzzy, c-format
msgid ""
"Source Output #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tClient: %s\n"
"\tSource: %u\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tFormat: %s\n"
"\tMute: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        balance %0.2f\n"
"\tBuffer Latency: %0.0f usec\n"
"\tSource Latency: %0.0f usec\n"
"\tResample method: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Sink Input #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tClient: %s\n"
"\tSink: %u\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tMute: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        balance %0.2f\n"
"\tBuffer Latency: %0.0f usec\n"
"\tSink Latency: %0.0f usec\n"
"\tResample method: %s\n"
"\tProperties:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:734
#, c-format
msgid "Failed to get sample information: %s"
msgstr "获取采样信息失败：%s"

#: ../src/utils/pactl.c:761
#, c-format
msgid ""
"Sample #%u\n"
"\tName: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        balance %0.2f\n"
"\tDuration: %0.1fs\n"
"\tSize: %s\n"
"\tLazy: %s\n"
"\tFilename: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Sample #%u\n"
"\tName: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        balance %0.2f\n"
"\tDuration: %0.1fs\n"
"\tSize: %s\n"
"\tLazy: %s\n"
"\tFilename: %s\n"
"\tProperties:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:791 ../src/utils/pactl.c:801
#, c-format
msgid "Failure: %s"
msgstr "失败：%s"

#: ../src/utils/pactl.c:915
#, fuzzy, c-format
msgid "Failed to set format: invalid format string %s"
msgstr "获取音频入口信息失败：%s"

#: ../src/utils/pactl.c:954
#, c-format
msgid "Failed to upload sample: %s"
msgstr "上传采样失败：%s"

#: ../src/utils/pactl.c:971
msgid "Premature end of file"
msgstr "文件过早结束"

#: ../src/utils/pactl.c:991
msgid "new"
msgstr ""

#: ../src/utils/pactl.c:994
msgid "change"
msgstr ""

#: ../src/utils/pactl.c:997
msgid "remove"
msgstr ""

#: ../src/utils/pactl.c:1000 ../src/utils/pactl.c:1035
msgid "unknown"
msgstr ""

#: ../src/utils/pactl.c:1008
msgid "sink"
msgstr ""

#: ../src/utils/pactl.c:1011
msgid "source"
msgstr ""

#: ../src/utils/pactl.c:1014
msgid "sink-input"
msgstr ""

#: ../src/utils/pactl.c:1017
msgid "source-output"
msgstr ""

#: ../src/utils/pactl.c:1020
msgid "module"
msgstr ""

#: ../src/utils/pactl.c:1023
msgid "client"
msgstr ""

#: ../src/utils/pactl.c:1026
msgid "sample-cache"
msgstr ""

#: ../src/utils/pactl.c:1029 ../src/utils/pactl.c:1032
#, fuzzy
msgid "server"
msgstr "无效服务器"

#: ../src/utils/pactl.c:1041
#, c-format
msgid "Event '%s' on %s #%u\n"
msgstr ""

#: ../src/utils/pactl.c:1258
msgid "Got SIGINT, exiting."
msgstr "收到 SIGINT，正在退出。"

#: ../src/utils/pactl.c:1285
msgid "Invalid volume specification"
msgstr "无效采样说明"

#: ../src/utils/pactl.c:1308
msgid "Volume outside permissible range.\n"
msgstr ""

#: ../src/utils/pactl.c:1319 ../src/utils/pactl.c:1320
#: ../src/utils/pactl.c:1321 ../src/utils/pactl.c:1322
#: ../src/utils/pactl.c:1323 ../src/utils/pactl.c:1324
#: ../src/utils/pactl.c:1325 ../src/utils/pactl.c:1326
#: ../src/utils/pactl.c:1327 ../src/utils/pactl.c:1328
#: ../src/utils/pactl.c:1329 ../src/utils/pactl.c:1330
#: ../src/utils/pactl.c:1331 ../src/utils/pactl.c:1332
#: ../src/utils/pactl.c:1333 ../src/utils/pactl.c:1334
#: ../src/utils/pactl.c:1335 ../src/utils/pactl.c:1336
#: ../src/utils/pactl.c:1337
msgid "[options]"
msgstr ""

#: ../src/utils/pactl.c:1321
msgid "[TYPE]"
msgstr ""

#: ../src/utils/pactl.c:1323
msgid "FILENAME [NAME]"
msgstr ""

#: ../src/utils/pactl.c:1324
msgid "NAME [SINK]"
msgstr ""

#: ../src/utils/pactl.c:1325
msgid "NAME"
msgstr ""

#: ../src/utils/pactl.c:1326
msgid "NAME [ARGS ...]"
msgstr ""

#: ../src/utils/pactl.c:1327
msgid "#N"
msgstr ""

#: ../src/utils/pactl.c:1328
msgid "#N SINK|SOURCE"
msgstr ""

#: ../src/utils/pactl.c:1329 ../src/utils/pactl.c:1334
msgid "NAME|#N 1|0"
msgstr ""

#: ../src/utils/pactl.c:1330
msgid "CARD PROFILE"
msgstr ""

#: ../src/utils/pactl.c:1331
msgid "NAME|#N PORT"
msgstr ""

#: ../src/utils/pactl.c:1332
msgid "NAME|#N VOLUME"
msgstr ""

#: ../src/utils/pactl.c:1333
msgid "#N VOLUME"
msgstr ""

#: ../src/utils/pactl.c:1335
msgid "#N 1|0"
msgstr ""

#: ../src/utils/pactl.c:1336
msgid "#N FORMATS"
msgstr ""

#: ../src/utils/pactl.c:1339
#, fuzzy, c-format
msgid ""
"\n"
"  -h, --help                            Show this help\n"
"      --version                         Show version\n"
"\n"
"  -s, --server=SERVER                   The name of the server to connect "
"to\n"
"  -n, --client-name=NAME                How to call this client on the "
"server\n"
msgstr ""
"%s [options] ... \n"
"\n"
"  -h, --help                            显示此帮助\n"
"      --version                         显示版本\n"
"  -s, --server=SERVER                   要连接的服务器名\n"
"\n"

#: ../src/utils/pactl.c:1380
#, c-format
msgid ""
"pactl %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"
msgstr ""
"pactl %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"

#: ../src/utils/pactl.c:1439
#, c-format
msgid "Specify nothing, or one of: %s"
msgstr ""

#: ../src/utils/pactl.c:1449
msgid "Please specify a sample file to load"
msgstr "请指定要加载的采样文件"

#: ../src/utils/pactl.c:1462
msgid "Failed to open sound file."
msgstr "打开声音文件失败。"

#: ../src/utils/pactl.c:1474
msgid "Warning: Failed to determine sample specification from file."
msgstr "警告：从文件中确定采样说明失败。"

#: ../src/utils/pactl.c:1484
msgid "You have to specify a sample name to play"
msgstr "您必须指定要播放的采样名"

#: ../src/utils/pactl.c:1496
msgid "You have to specify a sample name to remove"
msgstr "您必须指定要删除的采样名"

#: ../src/utils/pactl.c:1505
msgid "You have to specify a sink input index and a sink"
msgstr "您必须指定漏输入索引和漏"

#: ../src/utils/pactl.c:1515
msgid "You have to specify a source output index and a source"
msgstr "您必须指定源输出索引和源"

#: ../src/utils/pactl.c:1530
msgid "You have to specify a module name and arguments."
msgstr "必须指定模块名和参数。"

#: ../src/utils/pactl.c:1550
msgid "You have to specify a module index"
msgstr "必须指定模块索引"

#: ../src/utils/pactl.c:1560
msgid ""
"You may not specify more than one sink. You have to specify a boolean value."
msgstr "不可指定多个漏。必须指定一个布尔值。"

#: ../src/utils/pactl.c:1573
msgid ""
"You may not specify more than one source. You have to specify a boolean "
"value."
msgstr "不可指定多个源。必须指定一个布尔值。"

#: ../src/utils/pactl.c:1585
msgid "You have to specify a card name/index and a profile name"
msgstr "您必须指定声卡名称/索引和侧写名称"

#: ../src/utils/pactl.c:1596
msgid "You have to specify a sink name/index and a port name"
msgstr "您必须指定漏名称/索引和端口名称"

#: ../src/utils/pactl.c:1607
msgid "You have to specify a source name/index and a port name"
msgstr "您必须指定源名称/索引和端口名称"

#: ../src/utils/pactl.c:1618
msgid "You have to specify a sink name/index and a volume"
msgstr "您必须指定漏名称/索引和卷"

#: ../src/utils/pactl.c:1631
msgid "You have to specify a source name/index and a volume"
msgstr "您必须指定源名称/索引和卷"

#: ../src/utils/pactl.c:1644
msgid "You have to specify a sink input index and a volume"
msgstr "您必须指定漏输入索引和卷"

#: ../src/utils/pactl.c:1649
msgid "Invalid sink input index"
msgstr "无效露输入索引"

#: ../src/utils/pactl.c:1660
#, fuzzy
msgid "You have to specify a source output index and a volume"
msgstr "您必须指定源输出索引和源"

#: ../src/utils/pactl.c:1665
#, fuzzy
msgid "Invalid source output index"
msgstr "无效露输入索引"

#: ../src/utils/pactl.c:1677
msgid "You have to specify a sink name/index and a mute boolean"
msgstr "您必须指定漏名称/索引和静音布尔值"

#: ../src/utils/pactl.c:1682 ../src/utils/pactl.c:1699
#: ../src/utils/pactl.c:1721 ../src/utils/pactl.c:1742
#, fuzzy
msgid "Invalid mute specification"
msgstr "无效采样说明"

#: ../src/utils/pactl.c:1694
msgid "You have to specify a source name/index and a mute boolean"
msgstr "您必须指定源名称/索引和静音布尔值"

#: ../src/utils/pactl.c:1711
msgid "You have to specify a sink input index and a mute boolean"
msgstr "您必须指定露输入索引和静音布尔值"

#: ../src/utils/pactl.c:1716
msgid "Invalid sink input index specification"
msgstr "无效漏输入索引说明"

#: ../src/utils/pactl.c:1732
#, fuzzy
msgid "You have to specify a source output index and a mute boolean"
msgstr "您必须指定源名称/索引和静音布尔值"

#: ../src/utils/pactl.c:1737
#, fuzzy
msgid "Invalid source output index specification"
msgstr "无效漏输入索引说明"

#: ../src/utils/pactl.c:1756
#, fuzzy
msgid ""
"You have to specify a sink index and a semicolon-separated list of supported "
"formats"
msgstr "您必须指定漏名称/索引和静音布尔值"

#: ../src/utils/pactl.c:1772
msgid "No valid command specified."
msgstr "未指定有效的命令。"

#: ../src/utils/pax11publish.c:61
#, c-format
msgid ""
"%s [-D display] [-S server] [-O sink] [-I source] [-c file]  [-d|-e|-i|-r]\n"
"\n"
" -d    Show current PulseAudio data attached to X11 display (default)\n"
" -e    Export local PulseAudio data to X11 display\n"
" -i    Import PulseAudio data from X11 display to local environment "
"variables and cookie file.\n"
" -r    Remove PulseAudio data from X11 display\n"
msgstr ""
"%s [-D display] [-S server] [-O sink] [-I source] [-c file]  [-d|-e|-i|-r]\n"
"\n"
" -d    显示与X11显示器关联的当前PulseAudio数据（默认）\n"
" -e    将本地PulseAudio数据导出至X11显示器\n"
" -i    将PulseAudio数据由X11显示器导入至本地环境变量和cookie文件。\n"
" -r    从X11显示器清除PulseAudio数据\n"

#: ../src/utils/pax11publish.c:94
#, c-format
msgid "Failed to parse command line.\n"
msgstr "分析命令行失败。\n"

#: ../src/utils/pax11publish.c:113
#, c-format
msgid "Server: %s\n"
msgstr "服务器：%s\n"

#: ../src/utils/pax11publish.c:115
#, c-format
msgid "Source: %s\n"
msgstr "音频入口：%s\n"

#: ../src/utils/pax11publish.c:117
#, c-format
msgid "Sink: %s\n"
msgstr "音频出口：%s\n"

#: ../src/utils/pax11publish.c:119
#, c-format
msgid "Cookie: %s\n"
msgstr "Cookie：%s\n"

#: ../src/utils/pax11publish.c:137
#, c-format
msgid "Failed to parse cookie data\n"
msgstr "分析cookie数据失败\n"

#: ../src/utils/pax11publish.c:142
#, c-format
msgid "Failed to save cookie data\n"
msgstr "保存cookie数据失败\n"

#: ../src/utils/pax11publish.c:157
#, c-format
msgid "Failed to load client configuration file.\n"
msgstr "加载客户端配置文件失败。\n"

#: ../src/utils/pax11publish.c:162
#, c-format
msgid "Failed to read environment configuration data.\n"
msgstr "读取环境配置数据失败。\n"

#: ../src/utils/pax11publish.c:179
#, c-format
msgid "Failed to get FQDN.\n"
msgstr "获取FQDN失败。\n"

#: ../src/utils/pax11publish.c:199
#, c-format
msgid "Failed to load cookie data\n"
msgstr "加载cookie数据失败\n"

#: ../src/utils/pax11publish.c:217
#, c-format
msgid "Not yet implemented.\n"
msgstr "尚未实现。\n"

#: ../src/utils/pacmd.c:66
msgid "No PulseAudio daemon running, or not running as session daemon."
msgstr "没有 PulseAudio 守护进程在运行，或者没有作为会话守护进程运行。"

#: ../src/utils/pacmd.c:71
#, c-format
msgid "socket(PF_UNIX, SOCK_STREAM, 0): %s"
msgstr "socket(PF_UNIX, SOCK_STREAM, 0)：%s"

#: ../src/utils/pacmd.c:88
#, c-format
msgid "connect(): %s"
msgstr "connect()：%s"

#: ../src/utils/pacmd.c:96
msgid "Failed to kill PulseAudio daemon."
msgstr "杀死PulseAudio后台程序失败。"

#: ../src/utils/pacmd.c:104
msgid "Daemon not responding."
msgstr "后台程序未响应。"

#: ../src/utils/pacmd.c:184
#, c-format
msgid "poll(): %s"
msgstr "poll(): %s"

#: ../src/utils/pacmd.c:195 ../src/utils/pacmd.c:215
#, c-format
msgid "read(): %s"
msgstr "read()：%s"

#: ../src/utils/pacmd.c:237 ../src/utils/pacmd.c:255
#, c-format
msgid "write(): %s"
msgstr "write()：%s"

#: ../src/pulsecore/lock-autospawn.c:136 ../src/pulsecore/lock-autospawn.c:222
msgid "Cannot access autospawn lock."
msgstr "不能访问autospawn锁。"

#: ../src/modules/alsa/alsa-sink.c:560 ../src/modules/alsa/alsa-sink.c:726
#, c-format
msgid ""
"ALSA woke us up to write new data to the device, but there was actually "
"nothing to write!\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers.\n"
"We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() "
"returned 0 or another value < min_avail."
msgstr ""
"ALSA 提醒我们在该设备中写入新数据，但实际上没有什么可以写入的！\n"
"这很可能是 ALSA 驱动程序 '%s' 中的一个 bug。请向 ALSA 开发人员报告这个问"
"题。\n"
"提醒我们设置 POLLOUT -- 但结果是 snd_pcm_avail() 返回 0 或者另一个小于最小可"
"用值的数值。"

#: ../src/modules/alsa/alsa-source.c:519 ../src/modules/alsa/alsa-source.c:672
#, c-format
msgid ""
"ALSA woke us up to read new data from the device, but there was actually "
"nothing to read!\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers.\n"
"We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() "
"returned 0 or another value < min_avail."
msgstr ""
"ALSA 提醒我们从该设备中读取新数据，但实际上没有什么可以读取的！\n"
"这很可能是 ALSA 驱动程序 '%s' 中的一个 bug。请向 ALSA 开发人员报告这个问"
"题。\n"
"提醒我们设置 POLLOUT -- 但结果是 snd_pcm_avail() 返回 0 或者另一个小于最小可"
"用值的数值。"

#: ../src/modules/alsa/module-alsa-card.c:167
#: ../src/modules/bluetooth/module-bluetooth-device.c:2796
#: ../src/modules/alsa/alsa-mixer.c:3898
msgid "Off"
msgstr "关闭"

#: ../src/modules/bluetooth/module-bluetooth-device.c:2738
msgid "High Fidelity Playback (A2DP)"
msgstr "高保真回放（A2DP）"

#: ../src/modules/bluetooth/module-bluetooth-device.c:2752
msgid "High Fidelity Capture (A2DP)"
msgstr "高保真采集（A2DP）"

#: ../src/modules/bluetooth/module-bluetooth-device.c:2767
msgid "Telephony Duplex (HSP/HFP)"
msgstr "双工电话（HSP/HFP）"

#: ../src/modules/bluetooth/module-bluetooth-device.c:2781
msgid "Handsfree Gateway"
msgstr ""

#: ../src/modules/reserve-wrap.c:151
msgid "PulseAudio Sound Server"
msgstr "PulseAudio 声音服务器"

#: ../src/modules/module-rygel-media-server.c:510
#: ../src/modules/module-rygel-media-server.c:548
#: ../src/modules/module-rygel-media-server.c:903
msgid "Output Devices"
msgstr "输出设备"

#: ../src/modules/module-rygel-media-server.c:511
#: ../src/modules/module-rygel-media-server.c:549
#: ../src/modules/module-rygel-media-server.c:904
msgid "Input Devices"
msgstr "输入设备"

#: ../src/modules/module-rygel-media-server.c:1056
msgid "Audio on @HOSTNAME@"
msgstr "@HOSTNAME@ 中的音频"

#: ../src/modules/alsa/alsa-mixer.c:2219
msgid "Input"
msgstr "输入"

#: ../src/modules/alsa/alsa-mixer.c:2220
msgid "Docking Station Input"
msgstr "扩展坞输入"

#: ../src/modules/alsa/alsa-mixer.c:2221
#, fuzzy
msgid "Docking Station Microphone"
msgstr "扩展坞麦克风"

#: ../src/modules/alsa/alsa-mixer.c:2222
#, fuzzy
msgid "Docking Station Line In"
msgstr "扩展坞输入"

#: ../src/modules/alsa/alsa-mixer.c:2223 ../src/modules/alsa/alsa-mixer.c:2307
msgid "Line In"
msgstr "Line In"

#: ../src/modules/alsa/alsa-mixer.c:2224 ../src/modules/alsa/alsa-mixer.c:2302
msgid "Microphone"
msgstr "麦克风"

#: ../src/modules/alsa/alsa-mixer.c:2225 ../src/modules/alsa/alsa-mixer.c:2303
#, fuzzy
msgid "Front Microphone"
msgstr "扩展坞麦克风"

#: ../src/modules/alsa/alsa-mixer.c:2226 ../src/modules/alsa/alsa-mixer.c:2304
#, fuzzy
msgid "Rear Microphone"
msgstr "麦克风"

#: ../src/modules/alsa/alsa-mixer.c:2227
msgid "External Microphone"
msgstr "外部麦克风"

#: ../src/modules/alsa/alsa-mixer.c:2228 ../src/modules/alsa/alsa-mixer.c:2306
msgid "Internal Microphone"
msgstr "内部麦克风"

#: ../src/modules/alsa/alsa-mixer.c:2229 ../src/modules/alsa/alsa-mixer.c:2308
msgid "Radio"
msgstr "无线电"

#: ../src/modules/alsa/alsa-mixer.c:2230 ../src/modules/alsa/alsa-mixer.c:2309
msgid "Video"
msgstr "视频"

#: ../src/modules/alsa/alsa-mixer.c:2231
msgid "Automatic Gain Control"
msgstr "自动增益控制"

#: ../src/modules/alsa/alsa-mixer.c:2232
msgid "No Automatic Gain Control"
msgstr "无自动增益控制"

#: ../src/modules/alsa/alsa-mixer.c:2233
msgid "Boost"
msgstr "加速器"

#: ../src/modules/alsa/alsa-mixer.c:2234
msgid "No Boost"
msgstr "无加速器"

#: ../src/modules/alsa/alsa-mixer.c:2235
msgid "Amplifier"
msgstr "均衡器"

#: ../src/modules/alsa/alsa-mixer.c:2236
msgid "No Amplifier"
msgstr "无均衡器"

#: ../src/modules/alsa/alsa-mixer.c:2237
#, fuzzy
msgid "Bass Boost"
msgstr "加速器"

#: ../src/modules/alsa/alsa-mixer.c:2238
#, fuzzy
msgid "No Bass Boost"
msgstr "无加速器"

#: ../src/modules/alsa/alsa-mixer.c:2239
msgid "Speaker"
msgstr ""

#: ../src/modules/alsa/alsa-mixer.c:2240 ../src/modules/alsa/alsa-mixer.c:2311
msgid "Headphones"
msgstr "模拟耳机"

#: ../src/modules/alsa/alsa-mixer.c:2301
msgid "Analog Input"
msgstr "模拟输入"

#: ../src/modules/alsa/alsa-mixer.c:2305
msgid "Dock Microphone"
msgstr "扩展坞麦克风"

#: ../src/modules/alsa/alsa-mixer.c:2310
msgid "Analog Output"
msgstr "模拟输出 "

#: ../src/modules/alsa/alsa-mixer.c:2312
msgid "LFE on Separate Mono Output"
msgstr "模拟输出（LFE）"

#: ../src/modules/alsa/alsa-mixer.c:2313
#, fuzzy
msgid "Line Out"
msgstr "Line In"

#: ../src/modules/alsa/alsa-mixer.c:2314
msgid "Analog Mono Output"
msgstr "模拟单声道输出"

#: ../src/modules/alsa/alsa-mixer.c:2315
#, fuzzy
msgid "Speakers"
msgstr "模拟立体声"

#: ../src/modules/alsa/alsa-mixer.c:2316
msgid "HDMI / DisplayPort"
msgstr ""

#: ../src/modules/alsa/alsa-mixer.c:2317
#, fuzzy
msgid "Digital Output (S/PDIF)"
msgstr "数字立体声（HDMI）"

#: ../src/modules/alsa/alsa-mixer.c:2318
#, fuzzy
msgid "Digital Passthrough (S/PDIF)"
msgstr "数字立体声（HDMI）"

#: ../src/modules/alsa/alsa-mixer.c:3756
msgid "Analog Mono"
msgstr "模拟单声道"

#: ../src/modules/alsa/alsa-mixer.c:3757
msgid "Analog Stereo"
msgstr "模拟立体声"

#: ../src/modules/alsa/alsa-mixer.c:3758
msgid "Analog Surround 2.1"
msgstr "模拟环绕 2.1"

#: ../src/modules/alsa/alsa-mixer.c:3759
msgid "Analog Surround 3.0"
msgstr "模拟环绕 3.0"

#: ../src/modules/alsa/alsa-mixer.c:3760
msgid "Analog Surround 3.1"
msgstr "模拟环绕 3.1"

#: ../src/modules/alsa/alsa-mixer.c:3761
msgid "Analog Surround 4.0"
msgstr "模拟环绕 4.0"

#: ../src/modules/alsa/alsa-mixer.c:3762
msgid "Analog Surround 4.1"
msgstr "模拟环绕 4.1"

#: ../src/modules/alsa/alsa-mixer.c:3763
msgid "Analog Surround 5.0"
msgstr "模拟环绕 5.0"

#: ../src/modules/alsa/alsa-mixer.c:3764
msgid "Analog Surround 5.1"
msgstr "模拟环绕 5.1"

#: ../src/modules/alsa/alsa-mixer.c:3765
msgid "Analog Surround 6.0"
msgstr "模拟环绕 6.0"

#: ../src/modules/alsa/alsa-mixer.c:3766
msgid "Analog Surround 6.1"
msgstr "模拟环绕 6.1"

#: ../src/modules/alsa/alsa-mixer.c:3767
msgid "Analog Surround 7.0"
msgstr "模拟环绕 7.0"

#: ../src/modules/alsa/alsa-mixer.c:3768
msgid "Analog Surround 7.1"
msgstr "模拟环绕 7.1"

#: ../src/modules/alsa/alsa-mixer.c:3769
msgid "Digital Stereo (IEC958)"
msgstr "数字立体声（IEC958）"

#: ../src/modules/alsa/alsa-mixer.c:3770
#, fuzzy
msgid "Digital Passthrough  (IEC958)"
msgstr "数字立体声（IEC958）"

#: ../src/modules/alsa/alsa-mixer.c:3771
msgid "Digital Surround 4.0 (IEC958/AC3)"
msgstr "数字环绕 4.0（IEC958/AC3）"

#: ../src/modules/alsa/alsa-mixer.c:3772
msgid "Digital Surround 5.1 (IEC958/AC3)"
msgstr "数字环绕 5.1（IEC958/AC3）"

#: ../src/modules/alsa/alsa-mixer.c:3773
msgid "Digital Stereo (HDMI)"
msgstr "数字立体声（HDMI）"

#: ../src/modules/alsa/alsa-mixer.c:3774
#, fuzzy
msgid "Digital Surround 5.1 (HDMI)"
msgstr "数字环绕 5.1（IEC958/AC3）"

#: ../src/modules/alsa/alsa-mixer.c:3895
msgid "Analog Mono Duplex"
msgstr "模拟单声道双工"

#: ../src/modules/alsa/alsa-mixer.c:3896
msgid "Analog Stereo Duplex"
msgstr "模拟立体声双工"

#: ../src/modules/alsa/alsa-mixer.c:3897
msgid "Digital Stereo Duplex (IEC958)"
msgstr "数字立体声双工（IEC958）"

#: ../src/modules/alsa/alsa-mixer.c:3997
#, fuzzy, c-format
msgid "%s Output"
msgstr "空输出"

#: ../src/modules/alsa/alsa-mixer.c:4005
#, fuzzy, c-format
msgid "%s Input"
msgstr "输入"

#: ../src/modules/echo-cancel/module-echo-cancel.c:63
msgid ""
"source_name=<name for the source> source_properties=<properties for the "
"source> source_master=<name of source to filter> sink_name=<name for the "
"sink> sink_properties=<properties for the sink> sink_master=<name of sink to "
"filter> adjust_time=<how often to readjust rates in s> adjust_threshold=<how "
"much drift to readjust after in ms> format=<sample format> rate=<sample "
"rate> channels=<number of channels> channel_map=<channel map> "
"aec_method=<implementation to use> aec_args=<parameters for the AEC engine> "
"save_aec=<save AEC data in /tmp> autoloaded=<set if this module is being "
"loaded automatically> use_volume_sharing=<yes or no> "
msgstr ""

#: ../src/modules/module-equalizer-sink.c:72
msgid "General Purpose Equalizer"
msgstr ""

#: ../src/modules/module-equalizer-sink.c:76
#, fuzzy
msgid ""
"sink_name=<name of the sink> sink_properties=<properties for the sink> "
"sink_master=<sink to connect to> format=<sample format> rate=<sample rate> "
"channels=<number of channels> channel_map=<channel map> autoloaded=<set if "
"this module is being loaded automatically> use_volume_sharing=<yes or no> "
msgstr ""
"sink_name=<name for the sink> sink_properties=<properties for the sink> "
"master=<name of sink to filter> format=<sample format> rate=<sample rate> "
"channels=<number of channels> channel_map=<channel map> plugin=<ladspa "
"plugin name> label=<ladspa plugin label> control=<comma separated list of "
"input control values>"

#: ../src/modules/module-filter-apply.c:48
msgid "autoclean=<automatically unload unused filters?>"
msgstr ""

#: ../src/tests/resampler-test.c:257
#, c-format
msgid ""
"%s [options]\n"
"\n"
"-h, --help                            Show this help\n"
"-v, --verbose                         Print debug messages\n"
"      --from-rate=SAMPLERATE          From sample rate in Hz (defaults to "
"44100)\n"
"      --from-format=SAMPLEFORMAT      From sample type (defaults to s16le)\n"
"      --from-channels=CHANNELS        From number of channels (defaults to "
"1)\n"
"      --to-rate=SAMPLERATE            To sample rate in Hz (defaults to "
"44100)\n"
"      --to-format=SAMPLEFORMAT        To sample type (defaults to s16le)\n"
"      --to-channels=CHANNELS          To number of channels (defaults to 1)\n"
"      --resample-method=METHOD        Resample method (defaults to auto)\n"
"      --seconds=SECONDS               From stream duration (defaults to 60)\n"
"\n"
"If the formats are not specified, the test performs all formats "
"combinations,\n"
"back and forth.\n"
"\n"
"Sample type must be one of s16le, s16be, u8, float32le, float32be, ulaw, "
"alaw,\n"
"32le, s32be (defaults to s16ne)\n"
"\n"
"See --dump-resample-methods for possible values of resample methods.\n"
msgstr ""

#: ../src/tests/resampler-test.c:356
#, fuzzy, c-format
msgid "%s %s\n"
msgstr "%s %s"

#: ../src/tests/resampler-test.c:419
#, c-format
msgid "=== %d seconds: %d Hz %d ch (%s) -> %d Hz %d ch (%s)"
msgstr ""

#~ msgid "[%s:%u] rlimit not supported on this platform."
#~ msgstr "[%s:%u] 此平台不支持rlimit。"

#~ msgid "XOpenDisplay() failed"
#~ msgstr "XOpenDisplay()失败"

#~ msgid ""
#~ "Source Output #%u\n"
#~ "\tDriver: %s\n"
#~ "\tOwner Module: %s\n"
#~ "\tClient: %s\n"
#~ "\tSource: %u\n"
#~ "\tSample Specification: %s\n"
#~ "\tChannel Map: %s\n"
#~ "\tBuffer Latency: %0.0f usec\n"
#~ "\tSource Latency: %0.0f usec\n"
#~ "\tResample method: %s\n"
#~ "\tProperties:\n"
#~ "\t\t%s\n"
#~ msgstr ""
#~ "Source Output #%u\n"
#~ "\tDriver: %s\n"
#~ "\tOwner Module: %s\n"
#~ "\tClient: %s\n"
#~ "\tSource: %u\n"
#~ "\tSample Specification: %s\n"
#~ "\tChannel Map: %s\n"
#~ "\tBuffer Latency: %0.0f usec\n"
#~ "\tSource Latency: %0.0f usec\n"
#~ "\tResample method: %s\n"
#~ "\tProperties:\n"
#~ "\t\t%s\n"

#, fuzzy
#~ msgid ""
#~ "%s [options] stat\n"
#~ "%s [options] list\n"
#~ "%s [options] exit\n"
#~ "%s [options] upload-sample FILENAME [NAME]\n"
#~ "%s [options] play-sample NAME [SINK]\n"
#~ "%s [options] remove-sample NAME\n"
#~ "%s [options] move-sink-input SINKINPUT SINK\n"
#~ "%s [options] move-source-output SOURCEOUTPUT SOURCE\n"
#~ "%s [options] load-module NAME [ARGS ...]\n"
#~ "%s [options] unload-module MODULE\n"
#~ "%s [options] suspend-sink SINK 1|0\n"
#~ "%s [options] suspend-source SOURCE 1|0\n"
#~ "%s [options] set-card-profile CARD PROFILE\n"
#~ "%s [options] set-sink-port SINK PORT\n"
#~ "%s [options] set-source-port SOURCE PORT\n"
#~ "%s [options] set-sink-volume SINK VOLUME\n"
#~ "%s [options] set-source-volume SOURCE VOLUME\n"
#~ "%s [options] set-sink-input-volume SINKINPUT VOLUME\n"
#~ "%s [options] set-sink-mute SINK 1|0\n"
#~ "%s [options] set-source-mute SOURCE 1|0\n"
#~ "%s [options] set-sink-input-mute SINKINPUT 1|0\n"
#~ "%s [options] subscribe\n"
#~ "\n"
#~ "  -h, --help                            Show this help\n"
#~ "      --version                         Show version\n"
#~ "\n"
#~ "  -s, --server=SERVER                   The name of the server to connect "
#~ "to\n"
#~ "  -n, --client-name=NAME                How to call this client on the "
#~ "server\n"
#~ msgstr ""
#~ "%s [options] stat\n"
#~ "%s [options] list\n"
#~ "%s [options] exit\n"
#~ "%s [options] upload-sample FILENAME [NAME]\n"
#~ "%s [options] play-sample NAME [SINK]\n"
#~ "%s [options] remove-sample NAME\n"
#~ "%s [options] move-sink-input SINKINPUT SINK\n"
#~ "%s [options] move-source-output SOURCEOUTPUT SOURCE\n"
#~ "%s [options] load-module NAME [ARGS ...]\n"
#~ "%s [options] unload-module MODULE\n"
#~ "%s [options] suspend-sink SINK 1|0\n"
#~ "%s [options] suspend-source SOURCE 1|0\n"
#~ "%s [options] set-card-profile CARD PROFILE\n"
#~ "%s [options] set-sink-port SINK PORT\n"
#~ "%s [options] set-source-port SOURCE PORT\n"
#~ "%s [options] set-sink-volume SINK VOLUME\n"
#~ "%s [options] set-source-volume SOURCE VOLUME\n"
#~ "%s [options] set-sink-input-volume SINKINPUT VOLUME\n"
#~ "%s [options] set-sink-mute SINK 1|0\n"
#~ "%s [options] set-source-mute SOURCE 1|0\n"
#~ "%s [options] set-sink-input-mute SINKINPUT 1|0\n"
#~ "\n"
#~ "  -h, --help                            Show this help\n"
#~ "      --version                         Show version\n"
#~ "\n"
#~ "  -s, --server=SERVER                   The name of the server to connect "
#~ "to\n"
#~ "  -n, --client-name=NAME                How to call this client on the "
#~ "server\n"

#~ msgid "%s+%s"
#~ msgstr "%s+%s"

#~ msgid "%s / %s"
#~ msgstr "%s / %s"

#~ msgid "Digital Surround 4.0 (IEC958)"
#~ msgstr "数字环绕 4.0（IEC958）"

#~ msgid "Low Frequency Emmiter"
#~ msgstr "低频脉冲"