| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The main problem this patch addresses is that if a latch is put on
multi-level key with a Latch/Lock/Set, it is possible that after all
keys are released, still base modifiers are set, which typically will
make the keyboard unusable. To see how it happens (without the patch),
assume that key AltGr sets Mod5 when pressed by itself, and latches Mod3
when pressed together with Shift. Now press Shift, then AltGr and
release both keys in reverse order. Mod3 is now latched, and the
LatchMods filter remains active as the second filter. Now press AltGr;
Mod5 base modifier gets set, and the SetMods filter will become active
as the first filter. Release AltGr: First, the SetMods filter will set
clearMods to Mod5, then the LatchMods filter will overwrite clearMods
with Mod3. Result: the Mod5 base modifier will remain set. This
example becomes practically relevant for the revised German standard
layout (DIN 2137-1:2012-06).
Other changes implement the latch behaviour more accurately according to
the specification. For example, releasing a modifier latching key can
at the same time clear a locked modifier, promote another modifier that
is latched to locked, and latch a third modifier. Overall, what the
code does should be straightforward to compare what the XKB protocol
specification demands, see the table in section 6.3.
Finally, releasing a key no longer cancels a latch that has not become
pending yet. In my opinion, the specification is not clear; it speaks
of "operating" a key, which the patch effectivly interprets as "press"
rather than "press or release". From my experience, using the latter
interpretation makes latches on higher levels practically unusable. In
the example given above, one would have to release AltGr always before
Shift to get the Mod3-Latch. The practical relevance of latches on
higher levels is once more given by the revised German standard layout.
Signed-off-by: Andreas Wettstein <wettstein509@solnet.ch>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The redirect and the message action filter functions implicitly assumed that
when they receive an event for the same keycode they were activated for, that
this is the a release of the key that activated the filter. This is not true
if the key autorepeats. Due to the incorrect assumption, the effective key
repeat rate was effectively halved.
Signed-off-by: Andreas Wettstein <wettstein509@solnet.ch>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
When redirect actions are used with Gtk3, Gtk3 complained about
events not holding a GdkDevice. This was caused by device IDs
not being set for redirect actions.
More seriously, Gtk3 did not receive state changes redirect
actions might specify. This was because event_set_state in
dix/inpututils.c accesses the prev_state field, but the changes
for the redirect action were only put into the state field.
Signed-off-by: Andreas Wettstein <wettstein509@solnet.ch>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
When a key to which a message action is mapped is held down, presses of
other keys were not registered.
Signed-off-by: Andreas Wettstein <wettstein509@solnet.ch>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The main body of this function is an if { } else if { } pair of blocks.
Previously there was int button at the top level scope which is used
only in the first block, and a redeclaration of int button inside the
second block. Since there's no overlap in the code paths for the
two uses of button, move the one from the outer block into the first
block to help the programmer more quickly determine they are unrelated
usages, and to silence the gcc warning of:
xkbActions.c: In function '_XkbFilterDeviceBtn':
xkbActions.c:999:6: warning: declaration of 'button' shadows a previous local
xkbActions.c:955:6: warning: shadowed declaration is here
For consistency, move DeviceIntPtr dev declarations as well that are
used in the same way.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Wherever it's obvious which device we need (keyboard or pointer), use
GetMaster() instead of GetPairedDevice(). It is more reliable in actually
getting the device type we want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
These flags are required by the XKB spec section 6.3.
Signed-off-by: Andreas Wettstein <wettstein509@solnet.ch>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
|
|
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The removal of the double-use will cause some suble bugs as some conditions
to check for the dev->u.master case were broken and also evaluated as true
if lastSlave was set (instead of master).
Also breaks the input ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
|
|
This is not a straightforward search/replacement due to a long-standing
issue.
dev->u.master is the same field as dev->u.lastSlave. Thus, if dev is a master
device, a check for dev->u.master may give us false positives and false
negatives.
The switch to IsFloating() spells out these cases and modifies the
conditions accordingly to cover both cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
|
|
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
|
|
Xorg.log shows error: Valuators reported for non-valuator device.
This is caused by uninitialized valuators.mask in _XkbFilterRedirectKey(),
which trigger the error in UpdateDeviceState().
Signed-off-by: David Ge <davidqge@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Not an actual bug, but gcc can't tell that this variable cannot be
used without being initialized
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
If the button we're about to fake isn't down (or up), don't fake a release
(or press) event for it. Behaviour is the same as before, this just saves
a few cycles.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
commit 14327858391ebe929b806efb53ad79e789361883
xkb: release XTEST pointer buttons on physical releases. (#28808)
revealed a bug with the XTEST/PointerKeys interaction.
Events resulting from PointerKeys are injected into the event processing
stream, not appended to the event queue. The events generated for the fake
button press include a DeviceChangedEvent (DCE), a raw button event and the
button event itself. The DCE causes the master to switch classes to the
attached XTEST pointer device.
Once the fake button is processed, normal event processing continues with
events in the EQ. The master still contains the XTEST classes, causing some
events to be dropped if e.g. the number of valuators of the event in the
queue exceeds the XTEST device's number of valuators.
Example: the EQ contains the following events, processed one-by-one, left to
right.
[DCE (dev)][Btn down][Btn up][Motion][Motion][...]
^ XkbFakeDeviceButton injects [DCE (XTEST)][Btn up]
Thus the event sequence processed looks like this:
[DCE (dev)][Btn down][Btn up][DCE (XTEST)][Btn up][Motion][Motion][...]
The first DCE causes the master to switch to the device. The button up event
injects a DCE to the XTEST device, causing the following Motion events to be
processed with the master still being on XTEST classes.
This patch post-fixes the injected event sequence with a DCE to restore the
classes of the original slave device, resulting in an event sequence like
this:
[DCE (dev)][Btn down][Btn up][DCE (XTEST)][Btn up][DCE (dev)][Motion][Motion]
Note that this is a simplified description. The event sequence injected by
the PointerKeys code is injected for the master device only and the matching
slave device that caused the injection has already finished processing on
the slave. Furthermore, the injection happens as part of the the XKB layer,
before the unwrapping of the processInputProc takes us into the DIX where
the DCE is actually handled.
Bug reproducible with a device that reports more than 2 valuators. Simply
cause button releases on the device and wait for a "too many valuators"
warning message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Fix for OpenSolaris bug 6949755: Mouse Keys are ununusable
and possibly https://bugs.freedesktop.org/show_bug.cgi?id=24856
Ensures waitForUpdate is False before calling SetCursorPosition.
Normally waitForUpdate is False when SilkenMouse is active, True
when it's not. When it's True, the mouse cursor position on
screen is not updated immediately.
This is more critical on Solaris, since we disabled SigIO, thus in turn
disable SilkenMouse, due to the SSE2 vs. signal handler issues described in
Sun bugs 6849925, 6859428, and 6879897.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
If a button release event is posted for the MD pointer, post a release event
through the matching XTEST device. This way, a client who posts a button
press through the XTEST extension cannot inadvertedly lock the button.
This behaviour is required for historical reasons, until server 1.7 the core
pointer would release a button press on physical events, regardless of the
XTEST state. Clients seem to rely on this behaviour, causing seemingly stuck
grabs.
The merged behaviour is kept for multiple keyboard PointerKey events, if two
physical keyboards hold the button down as a result of PointerKey actions,
the button is not released until the last keyboard releases the button.
X.Org Bug 28808 <http://bugs.freedesktop.org/show_bug.cgi?id=28808>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This patch replicates the behaviour for button events. Only generate a
PointerKeys motion event on the master device, not on the slave device.
Fixes the current issue of PointerKey motion events generating key events as
well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Problem:
lockedPtrButtons keeps the state of the buttons locked by a PointerKeys button
press. Unconditionally clearing the bits may cause stuck buttons in this
sequence of events:
1. type Shift + NumLock to enable PointerKeys
2. type 0/Ins on keypad to emulate Button 1 press
→ button1 press event to client
3. press and release button 1 on physical mouse
→ button1 release event to client
Button 1 on the MD is now stuck and cannot be released.
Cause:
XKB PointerKeys button events are posted through the XTEST pointer device.
Once a press is generated, the XTEST device's button is down. The DIX merges
the button state of all attached SDs, hence the MD will have a button down
while the XTEST device has a button down.
PointerKey button events are only generated on the master device to avoid
duplicate events (see XkbFakeDeviceButton()). If the MD has the
lockedPtrButtons bit cleared by a release event on a physical device, no
such event is generated when a keyboard device triggers the PointerKey
ButtonRelease trigger. Since the event - if generated - is posted through
the XTEST pointer device, lack of a generated ButtonRelease event on the
XTEST pointer device means the button is never released, resulting in the
stuck button observed above.
Solution:
This patch merges the MD's lockedPtrButtons with the one of all attached
slave devices on release events. Thus, as long as one attached keyboard has
a lockedPtrButtons bit set, this bit is kept in the MD. Once a PointerKey
button is released on all keyboards, the matching release event is emulated
from the MD through the XTEST pointer device, thus also releasing the button
in the DIX.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Make sure all of the private keys used by the test code are
initialized before being used.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Robert Hooker <sarvatt@ubuntu.com>
|
|
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
|
|
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
|
|
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The name XkbDDXFakeDeviceButton and XkbDDXFakeDeviceMotion is somewhat
misleading, there's no DDX involved in the game at all anymore.
This removes XkbFakeDeviceMotion and XkbFakeDeviceButton from the API where
it arguably shouldn't have been in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
Section 4.6.1 of the XKB spec says that "the initial event always moves the
cursor the distance specified in the action [...]", so skip the
POINTER_ACCELERATE flag for GPE, it would cause double-acceleration.
Potential regression - GPE expects the coordinates to be either relative or
both. XKB in theory allows for x to be relative and y to be absolute (or
vice versa). Let's pretend that scenario has no users.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
Please no extension-specific macros for memory allocation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Reverts the following four patches:
feb757f384382c7782ceac55 "XKB: Sanitise vmods for redirected keys"
b5f49382fe48f0a762d9a15f "XKB: Sanitise ctrls action"
1bd7fd195d85681e722161f8 "XKB: Sanitise pointer actions"
61c508fa78aa08ea2666fde9 "XKB: Sanitise vmods in actions"
Strictly speaking, the structs used in the server are not part of the client
ABI. Practically, they are as we copy from the wire straight into the
structs. Changing the struct sizes breaks various wire/server conversions.
Even when the structs have the same size, some internal magic causes
conversions to fail. Visible by diffing the output files of:
setxkbmap -layout de; xkbcomp -xkb :0 busted.xkb
setxkbmap -layout de -print | xkbcomp -xkb - correct.xkb
Interestingly enough, busted.xkb is the working one although the output is
incorrect. Revert the four offending patches until the exact cause of this
breakage can be determined.
This patch restores functionality to Level3 modifiers.
X.Org Bug 19602 <http://bugs.freedesktop.org/show_bug.cgi?id=19602>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
I really don't know what the purpose of this variable is or was, aside from
potentially clobbering up our key state since there's a path where it may be
used uninitialised.
Also, this means that xkbi->prev_state is now accessible from the DIX with
meaningful data.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
|
|
|
|
Don't pass xEvent* and count through to processing, pass a single
InternalEvent.
Custom handlers are disabled for the time being. And for extra fun,
XKB's pointer motion emulation is disabled. But stick an error in there so
that we get reminded should we forget about it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
|
|
Before dropping down into the DIX, convert back into XI events. This is a
temporary solution only, until the DIX is capable of handling InternalEvents
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Turn two unsigned chars into one unsigned int for both vmods and the
vmod mask. As a bonus, remove broken unused accessor macro for setting
the vmods.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Turn four unsigned chars into one unsigned long.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Turn two unsigned chars into one int.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Modifiers get cleared by the XKB code when we drop down into core input
processing, so just delete the dead code path to simplify things a bit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
For some reason, XKB allows clients to set a global (!) flag that simply
turns lock keys into state no-ops. Ignore this flag.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Introduced with a85f0d6b98237d8a196de624207acf1983a1859a.
Reported by Thomas Jaeger.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
