1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
|
/*
* Copyright 2002 Momentum Computer
* Author: mdharm@momenco.com
*
* arch/mips/momentum/ocelot_c/cpci-irq.c
* Interrupt routines for cpci. Interrupt numbers are assigned from
* CPCI_IRQ_BASE to CPCI_IRQ_BASE+8 (8 interrupt sources).
*
* Note that the high-level software will need to be careful about using
* these interrupts. If this board is asserting a cPCI interrupt, it will
* also see the asserted interrupt. Care must be taken to avoid an
* interrupt flood.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <asm/io.h>
#include "ocelot_c_fpga.h"
#define CPCI_IRQ_BASE 8
static inline int ls1bit8(unsigned int x)
{
int b = 7, s;
s = 4; if (((unsigned char)(x << 4)) == 0) s = 0; b -= s; x <<= s;
s = 2; if (((unsigned char)(x << 2)) == 0) s = 0; b -= s; x <<= s;
s = 1; if (((unsigned char)(x << 1)) == 0) s = 0; b -= s;
return b;
}
/* mask off an interrupt -- 0 is enable, 1 is disable */
static inline void mask_cpci_irq(unsigned int irq)
{
uint32_t value;
value = OCELOT_FPGA_READ(INTMASK);
value |= 1 << (irq - CPCI_IRQ_BASE);
OCELOT_FPGA_WRITE(value, INTMASK);
/* read the value back to assure that it's really been written */
value = OCELOT_FPGA_READ(INTMASK);
}
/* unmask an interrupt -- 0 is enable, 1 is disable */
static inline void unmask_cpci_irq(unsigned int irq)
{
uint32_t value;
value = OCELOT_FPGA_READ(INTMASK);
value &= ~(1 << (irq - CPCI_IRQ_BASE));
OCELOT_FPGA_WRITE(value, INTMASK);
/* read the value back to assure that it's really been written */
value = OCELOT_FPGA_READ(INTMASK);
}
/*
* End IRQ processing
*/
static void end_cpci_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
unmask_cpci_irq(irq);
}
/*
* Interrupt handler for interrupts coming from the FPGA chip.
* It could be built in ethernet ports etc...
*/
void ll_cpci_irq(void)
{
unsigned int irq_src, irq_mask;
/* read the interrupt status registers */
irq_src = OCELOT_FPGA_READ(INTSTAT);
irq_mask = OCELOT_FPGA_READ(INTMASK);
/* mask for just the interrupts we want */
irq_src &= ~irq_mask;
do_IRQ(ls1bit8(irq_src) + CPCI_IRQ_BASE);
}
struct irq_chip cpci_irq_type = {
.typename = "CPCI/FPGA",
.ack = mask_cpci_irq,
.mask = mask_cpci_irq,
.mask_ack = mask_cpci_irq,
.unmask = unmask_cpci_irq,
.end = end_cpci_irq,
};
void cpci_irq_init(void)
{
int i;
for (i = CPCI_IRQ_BASE; i < (CPCI_IRQ_BASE + 8); i++)
set_irq_chip(i, &cpci_irq_type);
}
|
