summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)AuthorFilesLines
2012-10-05[media] media: s5p-hdmi: add HPD GPIO to platform dataTomasz Stanislawski1-0/+2
This patch extends s5p-hdmi platform data by a GPIO identifier for Hot-Plug-Detection pin. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] s5p-fimc: Remove unused platform data structure fieldsSylwester Nawrocki1-2/+0
alignment, fixed_phy_vdd and phy_enable fields are now unused so removed them. The data alignment is now derived directly from media bus pixel code, phy_enable callback has been replaced with direct function call and fixed_phy_vdd was dropped in commit 438df3ebe5f0ce408490a777a758d5905f0dd58f "[media] s5p-csis: Handle all available power supplies". Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] media: davinci: vpif: display: separate out subdev from outputLad, Prabhakar1-4/+15
vpif_display relied on a 1-1 mapping of output and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of outputs. Each output refers to a subdev and has routing information. An output does not have to have a subdev. The initial output for each channel is set to the fist output. Currently missing is support for associating multiple subdevs with an output. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] davinci: move struct vpif_interface to chan_cfgHans Verkuil1-1/+1
struct vpif_interface is channel specific, not subdev specific. Move it to the channel config. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] vpif_capture: move routing info from subdev to inputHans Verkuil1-2/+2
Routing information is a property of the input, not of the subdev. One subdev may provide multiple inputs, each with its own routing information. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] vpif_capture: remove unnecessary can_route flagHans Verkuil1-1/+0
Calling a subdev op that isn't implemented will just return -ENOIOCTLCMD No need to have a flag for that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] media: v4l2-ctrl: add a helper function to add standard control with ↵Lad, Prabhakar1-0/+23
driver specific menu Add helper function v4l2_ctrl_new_std_menu_items(), which adds a standard menu control, with driver specific menu. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] V4L: Add [get/set]_frame_desc subdev callbacksSylwester Nawrocki1-0/+42
Add subdev callbacks for setting up parameters of the frame on media bus that are not exposed to user space directly. This is just an initial, mostly stub implementation. struct v4l2_mbus_frame_desc is intended to be extended with sub-structures specific to a particular hardware media bus. For now these new callbacks are used only to query or specify maximum size of a compressed or hybrid (container) media bus frame in octets. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] V4L: Add s_rx_buffer subdev video operationSylwester Nawrocki1-0/+6
The s_rx_buffer callback allows the host to set buffer for a data being received by the subdev, e.g. non-image frame (meta) data. This callback can be implemented by subdevice like a MIPI CSI2 receiver, allowing the host driver to gather additional data into frame buffer passed to user space. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] dm644x: replace the obsolete preset API by the timings APIHans Verkuil3-14/+10
This patch replaces the preset API by the timings API, and appropriate changes in board file. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Add pipeline ops to separate FIMC-LITE moduleSylwester Nawrocki1-0/+18
In order to reuse the FIMC-LITE module on Exynos4 and Exynos5 SoC introduce a set of callbacks for the media pipeline control from within FIMC/FIMC-LITE video node. It lets us avoid symbol dependencies between FIMC-LITE and the whole media device driver, which simplifies the initialization sequences and doesn't introduce issues preventing common kernel image for exynos4 and exynos5 SoCs. This patch also corrects following build errors: drivers/built-in.o: In function `buffer_queue': drivers/media/video/s5p-fimc/fimc-lite.c:414: undefined reference to `fimc_pipeline_s_stream' drivers/built-in.o: In function `fimc_lite_resume': drivers/media/video/s5p-fimc/fimc-lite.c:1518: undefined reference to `fimc_pipeline_initialize' drivers/built-in.o: In function `fimc_lite_suspend': drivers/media/video/s5p-fimc/fimc-lite.c:1544: undefined reference to `fimc_pipeline_shutdown' when only CONFIG_VIDEO_EXYNOS_FIMC_LITE is selected, without CONFIG_VIDEO_S5P_FIMC. Reported-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] v4l2-ctrls: add a filter function to v4l2_ctrl_add_handlerHans Verkuil1-2/+16
With a filter function you can control more precisely which controls are added. This is useful in particular for radio device nodes for combined TV/Radio cards where you want to show just the radio-specific controls and not controls like brightness. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] videobuf2-core: Replace BUG_ON and return an error at vb2_queue_init()Ezequiel Garcia1-1/+1
This replaces BUG_ON() calls with WARN_ON(), and returns EINVAL if some parameter is NULL, as suggested by Jonathan and Mauro. The BUG_ON() call is too drastic to be used in this case. See the full discussion here: http://www.spinics.net/lists/linux-media/msg52462.html Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] Add v4l2 subdev driver for S5K4ECGX sensorSangwook Lee1-0/+37
This patch adds driver for Samsung S5K4ECGX image sensor with an embedded SoC ISP. The driver only implements preview operation mode and still capture (snapshot) and face detection features are missing now. Following controls are supported: contrast, saturation, brightness, sharpness. Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2-dev: add new VFL_DIR_ definesHans Verkuil1-1/+8
These will be used by v4l2-dev.c to improve ioctl checking. I.e. ioctls for capture should return -ENOTTY when called for an output device. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_crop constHans Verkuil3-4/+4
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_crop. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_modulator constHans Verkuil2-2/+2
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_modulator. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audout constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audout. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audio constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audio. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_(un)subscribe_event constHans Verkuil3-5/+5
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_(un)subscribe_event. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_freq_hw_seek constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_freq_hw_seek. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_jpegcomp constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_jpegcomp. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_fbuf constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_fbuf. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2-core: deprecate V4L2_BUF_TYPE_PRIVATEHans Verkuil1-8/+0
This buffer type isn't used at all, and since it is effectively undefined what it should do it is deprecated. The define still exists, but any internal support for such buffers is removed. The decisions to deprecate this was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-18[media] media v4l2-mem2mem: fix src/out and dst/cap num_rdySascha Hauer1-2/+2
src bufs belong to out queue, dst bufs belong to in queue. Currently this is not a real problem since all users currently need exactly one input and one output buffer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] mt9v032: Provide link frequency controlLaurent Pinchart1-0/+3
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] v4l2-ctrls: Add v4l2_ctrl_[gs]_ctrl_int64()Laurent Pinchart1-0/+23
These helper functions get and set a 64-bit control's value from within a driver. They are similar to v4l2_ctrl_[gs]_ctrl() but operate on 64-bit integer controls instead of 32-bit controls. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] ad9389b: driver for the Analog Devices AD9389B video encoderHans Verkuil2-0/+52
Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1741 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - No HDCP repeater support (we don't use that either) I'm sure that there are more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] adv7604: driver for the Analog Devices ADV7604 video decoderHans Verkuil2-0/+156
Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1545 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - Only port A of the four HDMI input ports is implemented (our hardware only uses that port) - No HDCP repeater support (we don't use that either) And since there are some 600-odd pages of datasheet for this single device, I'm sure that there are many more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] v4l2-common: add CVT and GTF detection functionsHans Verkuil1-0/+9
These two helper functions detect whether the analog video timings detected by the video receiver match the VESA CVT or GTF standards. They basically do the inverse of the CVT and GTF modeline calculations. This patch also adds a helper function that will determine the aspect ratio based on the provided EDID values. This aspect ratio can be given to the GTF helper function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] v4l2-common: add v4l_match_dv_timingsHans Verkuil1-0/+4
Add the v4l_match_dv_timings function that can be used to compare two v4l2_dv_timings structs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] v4l2-subdev: add support for the new edid ioctlsHans Verkuil1-0/+2
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] V4L: soc-camera: add selection API host operationsGuennadi Liakhovetski1-0/+2
Add .get_selection() and .set_selection() soc-camera host driver operations. Additionally check, that the user is not trying to change the output sizes during a running capture. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] soc-camera: Add and use soc_camera_power_[on|off]() helper functionsLaurent Pinchart1-0/+10
Instead of forcing all soc-camera drivers to go through the mid-layer to handle power management, create soc_camera_power_[on|off]() functions that can be called from the subdev .s_power() operation to manage regulators and platform-specific power handling. This allows non soc-camera hosts to use soc-camera-aware clients. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [g.liakhovetski@gmx.de: fix compile breakage] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] media: rc: Introduce RX51 IR transmitter driverTimo Kokkonen1-0/+10
This is the driver for the IR transmitter diode found on the Nokia N900 (also known as RX51) device. The driver is mostly the same as found in the original 2.6.28 based kernel that comes with the device. The following modifications have been made compared to the original driver version: - Adopt to the changes that has happen in the kernel during the past five years, such as the change in the include paths - The OMAP DM-timers require much more care nowadays. The timers need to be enabled and disabled or otherwise many actions fail. Timers must not be freed without first stopping them or otherwise the timer cannot be requested again. The code has been tested with sending IR codes with N900 device running Debian userland. The device receiving the codes was Anysee DVB-C USB receiver. Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb: get rid of fe_ioctl_override callbackMauro Carvalho Chehab1-3/+1
This callback were meant to allow overriding a FE callback, before its call, but it is not really needed, as the callback can be intercepted after tuner attachment. Worse than that, only DVBv3 calls are intercepted this way, so a DVBv5 application will produce different effects than a DVBv3 one. So, get rid of it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi>
2012-08-11[media] v4l2: typosMichael Jones2-3/+3
[mchehab@redhat.com: fix a merge conflict at Documentation/video4linux/v4l2-framework.txt] Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-11[media] omap3isp: ccdc: Add YUV input formats supportLaurent Pinchart1-11/+0
Enable the bridge automatically when the input format is YUYV8 or UYVY8. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-11[media] omap3isp: ccdc: Remove ispccdc_syncif structureLaurent Pinchart1-0/+3
The structure is only used to store configuration data and pass it to CCDC configuration functions. Access the data directly from the locations that need it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-09[media] v4l2-dev: remove V4L2_FL_LOCK_ALL_FOPSHans Verkuil1-3/+0
All drivers that needed V4L2_FL_LOCK_ALL_FOPS have been converted, so remove this flag altogether. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-09[media] saa7146: remove V4L2_FL_LOCK_ALL_FOPSHans Verkuil1-4/+0
Add proper locking to the file operations, allowing for the removal of the V4L2_FL_LOCK_ALL_FOPS flag. I also removed some dead code in the form of the saa7146_devices list and saa7146_devices_lock mutex: these were used once but that was a long time ago. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-30[media] v4l2: add core support for the new VIDIOC_ENUM_FREQ_BANDS ioctlHans Verkuil1-0/+2
This adds the usual core support code for this new ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-30[media] davinci: vpif: add support for clipping on output dataManjunath Hadli1-0/+2
add hardware clipping support for VPIF output data. This is needed as it is possible that the external encoder might get confused between the FF or 00 which are a part of the data and that of the SAV or EAV codes. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] media: gpio-ir-recv: add allowed_protos for platform dataDu, Changbin1-3/+4
It's better to give platform code a chance to specify the allowed protocols to use. [mchehab@redhat.com: fix merge conflict with a patch that made half of this change] Signed-off-by: Du, Changbin <changbin.du@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] videobuf2-core: add helper functionsHans Verkuil1-0/+41
Add helper functions to make it easier to adapt drivers to vb2. These helpers take care of core locking and check if the filehandle is the owner of the queue. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] v4l2-dev/ioctl.c: add vb2_queue support to video_deviceHans Verkuil3-0/+21
This prepares struct video_device for easier integration with vb2. It also introduces a new lock that protects the vb2_queue. It is up to the driver to use it or not. And the driver can associate an owner filehandle with the queue to check whether queuing requests are permitted for the calling filehandle. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] v4l2-ioctl: remove v4l_(i2c_)print_ioctlHans Verkuil1-17/+3
v4l_i2c_print_ioctl wasn't used and v4l_print_ioctl could be replaced by v4l_printk_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[PATCH] media: add Analog Devices ADV7393 video encoder driverBenoît Thébaudeau2-0/+31
Add ADV7393 I²C-based video encoder driver. This driver has been tested on custom hardware. It has been tested for composite output. It is derived from the ADV7343 driver. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-05[media] videobuf-core.h: remove input fieldsMauro Carvalho Chehab1-2/+0
Now that the input fields got removed from the userspace API, there's no sense to keep there at the VB struct. Remove it. Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-25[media] media: gpio-ir-recv: add map nameBenoît Thébaudeau1-0/+1
Make it possible for gpio-ir-recv users to choose a map name. Cc: Ravi Kumar V <kumarrav@codeaurora.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 04:20:34 +0000