diff options
Diffstat (limited to 'drivers/net/ethernet/dec')
22 files changed, 23627 insertions, 0 deletions
diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig new file mode 100644 index 00000000000..40e8df9fde8 --- /dev/null +++ b/drivers/net/ethernet/dec/Kconfig @@ -0,0 +1,36 @@ +# +# Digital Equipment Inc network device configuration +# + +config NET_VENDOR_DEC + bool "Digital Equipment devices" + depends on PCI || EISA || CARDBUS + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about DEC cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_DEC + +config EWRK3 + tristate "EtherWORKS 3 (DE203, DE204, DE205) support" + depends on ISA + select CRC32 + ---help--- + This driver supports the DE203, DE204 and DE205 network (Ethernet) + cards. If this is for you, say Y and read + <file:Documentation/networking/ewrk3.txt> in the kernel source as + well as the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called ewrk3. + +source "drivers/net/ethernet/dec/tulip/Kconfig" + +endif # NET_VENDOR_DEC diff --git a/drivers/net/ethernet/dec/Makefile b/drivers/net/ethernet/dec/Makefile new file mode 100644 index 00000000000..1b01ed8d42c --- /dev/null +++ b/drivers/net/ethernet/dec/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Digital Equipment Inc. network device drivers. +# + +obj-$(CONFIG_EWRK3) += ewrk3.o +obj-$(CONFIG_NET_TULIP) += tulip/ diff --git a/drivers/net/ethernet/dec/ewrk3.c b/drivers/net/ethernet/dec/ewrk3.c new file mode 100644 index 00000000000..05a5f71451a --- /dev/null +++ b/drivers/net/ethernet/dec/ewrk3.c @@ -0,0 +1,1959 @@ +/* ewrk3.c: A DIGITAL EtherWORKS 3 ethernet driver for Linux. + + Written 1994 by David C. Davies. + + Copyright 1994 Digital Equipment Corporation. + + This software may be used and distributed according to the terms of + the GNU General Public License, incorporated herein by reference. + + This driver is written for the Digital Equipment Corporation series + of EtherWORKS ethernet cards: + + DE203 Turbo (BNC) + DE204 Turbo (TP) + DE205 Turbo (TP BNC) + + The driver has been tested on a relatively busy network using the DE205 + card and benchmarked with 'ttcp': it transferred 16M of data at 975kB/s + (7.8Mb/s) to a DECstation 5000/200. + + The author may be reached at davies@maniac.ultranet.com. + + ========================================================================= + This driver has been written substantially from scratch, although its + inheritance of style and stack interface from 'depca.c' and in turn from + Donald Becker's 'lance.c' should be obvious. + + The DE203/4/5 boards all use a new proprietary chip in place of the + LANCE chip used in prior cards (DEPCA, DE100, DE200/1/2, DE210, DE422). + Use the depca.c driver in the standard distribution for the LANCE based + cards from DIGITAL; this driver will not work with them. + + The DE203/4/5 cards have 2 main modes: shared memory and I/O only. I/O + only makes all the card accesses through I/O transactions and no high + (shared) memory is used. This mode provides a >48% performance penalty + and is deprecated in this driver, although allowed to provide initial + setup when hardstrapped. + + The shared memory mode comes in 3 flavours: 2kB, 32kB and 64kB. There is + no point in using any mode other than the 2kB mode - their performances + are virtually identical, although the driver has been tested in the 2kB + and 32kB modes. I would suggest you uncomment the line: + + FORCE_2K_MODE; + + to allow the driver to configure the card as a 2kB card at your current + base address, thus leaving more room to clutter your system box with + other memory hungry boards. + + As many ISA and EISA cards can be supported under this driver as you + wish, limited primarily by the available IRQ lines, rather than by the + available I/O addresses (24 ISA, 16 EISA). I have checked different + configurations of multiple depca cards and ewrk3 cards and have not + found a problem yet (provided you have at least depca.c v0.38) ... + + The board IRQ setting must be at an unused IRQ which is auto-probed + using Donald Becker's autoprobe routines. All these cards are at + {5,10,11,15}. + + No 16MB memory limitation should exist with this driver as DMA is not + used and the common memory area is in low memory on the network card (my + current system has 20MB and I've not had problems yet). + + The ability to load this driver as a loadable module has been included + and used extensively during the driver development (to save those long + reboot sequences). To utilise this ability, you have to do 8 things: + + 0) have a copy of the loadable modules code installed on your system. + 1) copy ewrk3.c from the /linux/drivers/net directory to your favourite + temporary directory. + 2) edit the source code near line 1898 to reflect the I/O address and + IRQ you're using. + 3) compile ewrk3.c, but include -DMODULE in the command line to ensure + that the correct bits are compiled (see end of source code). + 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a + kernel with the ewrk3 configuration turned off and reboot. + 5) insmod ewrk3.o + [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y] + [Adam Kropelin: now accepts irq=x1,x2 io=y1,y2 for multiple cards] + 6) run the net startup bits for your new eth?? interface manually + (usually /etc/rc.inet[12] at boot time). + 7) enjoy! + + Note that autoprobing is not allowed in loadable modules - the system is + already up and running and you're messing with interrupts. + + To unload a module, turn off the associated interface + 'ifconfig eth?? down' then 'rmmod ewrk3'. + + Promiscuous mode has been turned off in this driver, but all the + multicast address bits have been turned on. This improved the send + performance on a busy network by about 13%. + + Ioctl's have now been provided (primarily because I wanted to grab some + packet size statistics). They are patterned after 'plipconfig.c' from a + suggestion by Alan Cox. Using these ioctls, you can enable promiscuous + mode, add/delete multicast addresses, change the hardware address, get + packet size distribution statistics and muck around with the control and + status register. I'll add others if and when the need arises. + + TO DO: + ------ + + + Revision History + ---------------- + + Version Date Description + + 0.1 26-aug-94 Initial writing. ALPHA code release. + 0.11 31-aug-94 Fixed: 2k mode memory base calc., + LeMAC version calc., + IRQ vector assignments during autoprobe. + 0.12 31-aug-94 Tested working on LeMAC2 (DE20[345]-AC) card. + Fixed up MCA hash table algorithm. + 0.20 4-sep-94 Added IOCTL functionality. + 0.21 14-sep-94 Added I/O mode. + 0.21axp 15-sep-94 Special version for ALPHA AXP Linux V1.0. + 0.22 16-sep-94 Added more IOCTLs & tidied up. + 0.23 21-sep-94 Added transmit cut through. + 0.24 31-oct-94 Added uid checks in some ioctls. + 0.30 1-nov-94 BETA code release. + 0.31 5-dec-94 Added check/allocate region code. + 0.32 16-jan-95 Broadcast packet fix. + 0.33 10-Feb-95 Fix recognition bug reported by <bkm@star.rl.ac.uk>. + 0.40 27-Dec-95 Rationalise MODULE and autoprobe code. + Rewrite for portability & updated. + ALPHA support from <jestabro@amt.tay1.dec.com> + Added verify_area() calls in ewrk3_ioctl() from + suggestion by <heiko@colossus.escape.de>. + Add new multicasting code. + 0.41 20-Jan-96 Fix IRQ set up problem reported by + <kenneth@bbs.sas.ntu.ac.sg>. + 0.42 22-Apr-96 Fix alloc_device() bug <jari@markkus2.fimr.fi> + 0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c + 0.44 08-Nov-01 use library crc32 functions <Matt_Domsch@dell.com> + 0.45 19-Jul-02 fix unaligned access on alpha <martin@bruli.net> + 0.46 10-Oct-02 Multiple NIC support when module <akropel1@rochester.rr.com> + 0.47 18-Oct-02 ethtool support <akropel1@rochester.rr.com> + 0.48 18-Oct-02 cli/sti removal for 2.5 <vda@port.imtp.ilyichevsk.odessa.ua> + ioctl locking, signature search cleanup <akropel1@rochester.rr.com> + + ========================================================================= + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/crc32.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/time.h> +#include <linux/types.h> +#include <linux/unistd.h> +#include <linux/ctype.h> +#include <linux/bitops.h> + +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> + +#include "ewrk3.h" + +#define DRV_NAME "ewrk3" +#define DRV_VERSION "0.48" + +static char version[] __initdata = +DRV_NAME ":v" DRV_VERSION " 2002/10/18 davies@maniac.ultranet.com\n"; + +#ifdef EWRK3_DEBUG +static int ewrk3_debug = EWRK3_DEBUG; +#else +static int ewrk3_debug = 1; +#endif + +#define EWRK3_NDA 0xffe0 /* No Device Address */ + +#define PROBE_LENGTH 32 +#define ETH_PROM_SIG 0xAA5500FFUL + +#ifndef EWRK3_SIGNATURE +#define EWRK3_SIGNATURE {"DE203","DE204","DE205",""} +#define EWRK3_STRLEN 8 +#endif + +#ifndef EWRK3_RAM_BASE_ADDRESSES +#define EWRK3_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0x00000} +#endif + +/* + ** Sets up the I/O area for the autoprobe. + */ +#define EWRK3_IO_BASE 0x100 /* Start address for probe search */ +#define EWRK3_IOP_INC 0x20 /* I/O address increment */ +#define EWRK3_TOTAL_SIZE 0x20 /* required I/O address length */ + +#ifndef MAX_NUM_EWRK3S +#define MAX_NUM_EWRK3S 21 +#endif + +#ifndef EWRK3_EISA_IO_PORTS +#define EWRK3_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ +#endif + +#ifndef MAX_EISA_SLOTS +#define MAX_EISA_SLOTS 16 +#define EISA_SLOT_INC 0x1000 +#endif + +#define QUEUE_PKT_TIMEOUT (1*HZ) /* Jiffies */ + +/* + ** EtherWORKS 3 shared memory window sizes + */ +#define IO_ONLY 0x00 +#define SHMEM_2K 0x800 +#define SHMEM_32K 0x8000 +#define SHMEM_64K 0x10000 + +/* + ** EtherWORKS 3 IRQ ENABLE/DISABLE + */ +#define ENABLE_IRQs { \ + icr |= lp->irq_mask;\ + outb(icr, EWRK3_ICR); /* Enable the IRQs */\ +} + +#define DISABLE_IRQs { \ + icr = inb(EWRK3_ICR);\ + icr &= ~lp->irq_mask;\ + outb(icr, EWRK3_ICR); /* Disable the IRQs */\ +} + +/* + ** EtherWORKS 3 START/STOP + */ +#define START_EWRK3 { \ + csr = inb(EWRK3_CSR);\ + csr &= ~(CSR_TXD|CSR_RXD);\ + outb(csr, EWRK3_CSR); /* Enable the TX and/or RX */\ +} + +#define STOP_EWRK3 { \ + csr = (CSR_TXD|CSR_RXD);\ + outb(csr, EWRK3_CSR); /* Disable the TX and/or RX */\ +} + +/* + ** The EtherWORKS 3 private structure + */ +#define EWRK3_PKT_STAT_SZ 16 +#define EWRK3_PKT_BIN_SZ 128 /* Should be >=100 unless you + increase EWRK3_PKT_STAT_SZ */ + +struct ewrk3_stats { + u32 bins[EWRK3_PKT_STAT_SZ]; + u32 unicast; + u32 multicast; + u32 broadcast; + u32 excessive_collisions; + u32 tx_underruns; + u32 excessive_underruns; +}; + +struct ewrk3_private { + char adapter_name[80]; /* Name exported to /proc/ioports */ + u_long shmem_base; /* Shared memory start address */ + void __iomem *shmem; + u_long shmem_length; /* Shared memory window length */ + struct ewrk3_stats pktStats; /* Private stats counters */ + u_char irq_mask; /* Adapter IRQ mask bits */ + u_char mPage; /* Maximum 2kB Page number */ + u_char lemac; /* Chip rev. level */ + u_char hard_strapped; /* Don't allow a full open */ + u_char txc; /* Transmit cut through */ + void __iomem *mctbl; /* Pointer to the multicast table */ + u_char led_mask; /* Used to reserve LED access for ethtool */ + spinlock_t hw_lock; +}; + +/* + ** Force the EtherWORKS 3 card to be in 2kB MODE + */ +#define FORCE_2K_MODE { \ + shmem_length = SHMEM_2K;\ + outb(((mem_start - 0x80000) >> 11), EWRK3_MBR);\ +} + +/* + ** Public Functions + */ +static int ewrk3_open(struct net_device *dev); +static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t ewrk3_interrupt(int irq, void *dev_id); +static int ewrk3_close(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static const struct ethtool_ops ethtool_ops_203; +static const struct ethtool_ops ethtool_ops; + +/* + ** Private functions + */ +static int ewrk3_hw_init(struct net_device *dev, u_long iobase); +static void ewrk3_init(struct net_device *dev); +static int ewrk3_rx(struct net_device *dev); +static int ewrk3_tx(struct net_device *dev); +static void ewrk3_timeout(struct net_device *dev); + +static void EthwrkSignature(char *name, char *eeprom_image); +static int DevicePresent(u_long iobase); +static void SetMulticastFilter(struct net_device *dev); +static int EISA_signature(char *name, s32 eisa_id); + +static int Read_EEPROM(u_long iobase, u_char eaddr); +static int Write_EEPROM(short data, u_long iobase, u_char eaddr); +static u_char get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType); + +static int ewrk3_probe1(struct net_device *dev, u_long iobase, int irq); +static int isa_probe(struct net_device *dev, u_long iobase); +static int eisa_probe(struct net_device *dev, u_long iobase); + +static u_char irq[MAX_NUM_EWRK3S+1] = {5, 0, 10, 3, 11, 9, 15, 12}; + +static char name[EWRK3_STRLEN + 1]; +static int num_ewrks3s; + +/* + ** Miscellaneous defines... + */ +#define INIT_EWRK3 {\ + outb(EEPROM_INIT, EWRK3_IOPR);\ + mdelay(1);\ +} + +#ifndef MODULE +struct net_device * __init ewrk3_probe(int unit) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct ewrk3_private)); + int err; + + if (!dev) + return ERR_PTR(-ENOMEM); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + } + + err = ewrk3_probe1(dev, dev->base_addr, dev->irq); + if (err) + goto out; + return dev; +out: + free_netdev(dev); + return ERR_PTR(err); + +} +#endif + +static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq) +{ + int err; + + dev->base_addr = iobase; + dev->irq = irq; + + /* Address PROM pattern */ + err = isa_probe(dev, iobase); + if (err != 0) + err = eisa_probe(dev, iobase); + + if (err) + return err; + + err = register_netdev(dev); + if (err) + release_region(dev->base_addr, EWRK3_TOTAL_SIZE); + + return err; +} + +static const struct net_device_ops ewrk3_netdev_ops = { + .ndo_open = ewrk3_open, + .ndo_start_xmit = ewrk3_queue_pkt, + .ndo_stop = ewrk3_close, + .ndo_set_multicast_list = set_multicast_list, + .ndo_do_ioctl = ewrk3_ioctl, + .ndo_tx_timeout = ewrk3_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int __init +ewrk3_hw_init(struct net_device *dev, u_long iobase) +{ + struct ewrk3_private *lp; + int i, status = 0; + u_long mem_start, shmem_length; + u_char cr, cmr, icr, nicsr, lemac, hard_strapped = 0; + u_char eeprom_image[EEPROM_MAX], chksum, eisa_cr = 0; + + /* + ** Stop the EWRK3. Enable the DBR ROM. Disable interrupts and remote boot. + ** This also disables the EISA_ENABLE bit in the EISA Control Register. + */ + if (iobase > 0x400) + eisa_cr = inb(EISA_CR); + INIT_EWRK3; + + nicsr = inb(EWRK3_CSR); + + icr = inb(EWRK3_ICR); + icr &= 0x70; + outb(icr, EWRK3_ICR); /* Disable all the IRQs */ + + if (nicsr != (CSR_TXD | CSR_RXD)) + return -ENXIO; + + /* Check that the EEPROM is alive and well and not living on Pluto... */ + for (chksum = 0, i = 0; i < EEPROM_MAX; i += 2) { + union { + short val; + char c[2]; + } tmp; + + tmp.val = (short) Read_EEPROM(iobase, (i >> 1)); + eeprom_image[i] = tmp.c[0]; + eeprom_image[i + 1] = tmp.c[1]; + chksum += eeprom_image[i] + eeprom_image[i + 1]; + } + + if (chksum != 0) { /* Bad EEPROM Data! */ + printk("%s: Device has a bad on-board EEPROM.\n", dev->name); + return -ENXIO; + } + + EthwrkSignature(name, eeprom_image); + if (*name == '\0') + return -ENXIO; + + dev->base_addr = iobase; + + if (iobase > 0x400) { + outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */ + } + lemac = eeprom_image[EEPROM_CHIPVER]; + cmr = inb(EWRK3_CMR); + + if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) || + ((lemac == LeMAC2) && !(cmr & CMR_HS))) { + printk("%s: %s at %#4lx", dev->name, name, iobase); + hard_strapped = 1; + } else if ((iobase & 0x0fff) == EWRK3_EISA_IO_PORTS) { + /* EISA slot address */ + printk("%s: %s at %#4lx (EISA slot %ld)", + dev->name, name, iobase, ((iobase >> 12) & 0x0f)); + } else { /* ISA port address */ + printk("%s: %s at %#4lx", dev->name, name, iobase); + } + + printk(", h/w address "); + if (lemac != LeMAC2) + DevicePresent(iobase); /* need after EWRK3_INIT */ + status = get_hw_addr(dev, eeprom_image, lemac); + printk("%pM\n", dev->dev_addr); + + if (status) { + printk(" which has an EEPROM CRC error.\n"); + return -ENXIO; + } + + if (lemac == LeMAC2) { /* Special LeMAC2 CMR things */ + cmr &= ~(CMR_RA | CMR_WB | CMR_LINK | CMR_POLARITY | CMR_0WS); + if (eeprom_image[EEPROM_MISC0] & READ_AHEAD) + cmr |= CMR_RA; + if (eeprom_image[EEPROM_MISC0] & WRITE_BEHIND) + cmr |= CMR_WB; + if (eeprom_image[EEPROM_NETMAN0] & NETMAN_POL) + cmr |= CMR_POLARITY; + if (eeprom_image[EEPROM_NETMAN0] & NETMAN_LINK) + cmr |= CMR_LINK; + if (eeprom_image[EEPROM_MISC0] & _0WS_ENA) + cmr |= CMR_0WS; + } + if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM) + cmr |= CMR_DRAM; + outb(cmr, EWRK3_CMR); + + cr = inb(EWRK3_CR); /* Set up the Control Register */ + cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD; + if (cr & SETUP_APD) + cr |= eeprom_image[EEPROM_SETUP] & SETUP_PS; + cr |= eeprom_image[EEPROM_MISC0] & FAST_BUS; + cr |= eeprom_image[EEPROM_MISC0] & ENA_16; + outb(cr, EWRK3_CR); + + /* + ** Determine the base address and window length for the EWRK3 + ** RAM from the memory base register. + */ + mem_start = inb(EWRK3_MBR); + shmem_length = 0; + if (mem_start != 0) { + if ((mem_start >= 0x0a) && (mem_start <= 0x0f)) { + mem_start *= SHMEM_64K; + shmem_length = SHMEM_64K; + } else if ((mem_start >= 0x14) && (mem_start <= 0x1f)) { + mem_start *= SHMEM_32K; + shmem_length = SHMEM_32K; + } else if ((mem_start >= 0x40) && (mem_start <= 0xff)) { + mem_start = mem_start * SHMEM_2K + 0x80000; + shmem_length = SHMEM_2K; + } else { + return -ENXIO; + } + } + /* + ** See the top of this source code for comments about + ** uncommenting this line. + */ +/* FORCE_2K_MODE; */ + + if (hard_strapped) { + printk(" is hard strapped.\n"); + } else if (mem_start) { + printk(" has a %dk RAM window", (int) (shmem_length >> 10)); + printk(" at 0x%.5lx", mem_start); + } else { + printk(" is in I/O only mode"); + } + + lp = netdev_priv(dev); + lp->shmem_base = mem_start; + lp->shmem = ioremap(mem_start, shmem_length); + if (!lp->shmem) + return -ENOMEM; + lp->shmem_length = shmem_length; + lp->lemac = lemac; + lp->hard_strapped = hard_strapped; + lp->led_mask = CR_LED; + spin_lock_init(&lp->hw_lock); + + lp->mPage = 64; + if (cmr & CMR_DRAM) + lp->mPage <<= 1; /* 2 DRAMS on module */ + + sprintf(lp->adapter_name, "%s (%s)", name, dev->name); + + lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM; + + if (!hard_strapped) { + /* + ** Enable EWRK3 board interrupts for autoprobing + */ + icr |= ICR_IE; /* Enable interrupts */ + outb(icr, EWRK3_ICR); + + /* The DMA channel may be passed in on this parameter. */ + dev->dma = 0; + + /* To auto-IRQ we enable the initialization-done and DMA err, + interrupts. For now we will always get a DMA error. */ + if (dev->irq < 2) { +#ifndef MODULE + u_char irqnum; + unsigned long irq_mask; + + + irq_mask = probe_irq_on(); + + /* + ** Trigger a TNE interrupt. + */ + icr |= ICR_TNEM; + outb(1, EWRK3_TDQ); /* Write to the TX done queue */ + outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */ + + irqnum = irq[((icr & IRQ_SEL) >> 4)]; + + mdelay(20); + dev->irq = probe_irq_off(irq_mask); + if ((dev->irq) && (irqnum == dev->irq)) { + printk(" and uses IRQ%d.\n", dev->irq); + } else { + if (!dev->irq) { + printk(" and failed to detect IRQ line.\n"); + } else if ((irqnum == 1) && (lemac == LeMAC2)) { + printk(" and an illegal IRQ line detected.\n"); + } else { + printk(", but incorrect IRQ line detected.\n"); + } + iounmap(lp->shmem); + return -ENXIO; + } + + DISABLE_IRQs; /* Mask all interrupts */ + +#endif /* MODULE */ + } else { + printk(" and requires IRQ%d.\n", dev->irq); + } + } + + if (ewrk3_debug > 1) { + printk(version); + } + /* The EWRK3-specific entries in the device structure. */ + dev->netdev_ops = &ewrk3_netdev_ops; + if (lp->adapter_name[4] == '3') + SET_ETHTOOL_OPS(dev, ðtool_ops_203); + else + SET_ETHTOOL_OPS(dev, ðtool_ops); + dev->watchdog_timeo = QUEUE_PKT_TIMEOUT; + + dev->mem_start = 0; + + return 0; +} + + +static int ewrk3_open(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int status = 0; + u_char icr, csr; + + /* + ** Stop the TX and RX... + */ + STOP_EWRK3; + + if (!lp->hard_strapped) { + if (request_irq(dev->irq, (void *) ewrk3_interrupt, 0, "ewrk3", dev)) { + printk("ewrk3_open(): Requested IRQ%d is busy\n", dev->irq); + status = -EAGAIN; + } else { + + /* + ** Re-initialize the EWRK3... + */ + ewrk3_init(dev); + + if (ewrk3_debug > 1) { + printk("%s: ewrk3 open with irq %d\n", dev->name, dev->irq); + printk(" physical address: %pM\n", dev->dev_addr); + if (lp->shmem_length == 0) { + printk(" no shared memory, I/O only mode\n"); + } else { + printk(" start of shared memory: 0x%08lx\n", lp->shmem_base); + printk(" window length: 0x%04lx\n", lp->shmem_length); + } + printk(" # of DRAMS: %d\n", ((inb(EWRK3_CMR) & 0x02) ? 2 : 1)); + printk(" csr: 0x%02x\n", inb(EWRK3_CSR)); + printk(" cr: 0x%02x\n", inb(EWRK3_CR)); + printk(" icr: 0x%02x\n", inb(EWRK3_ICR)); + printk(" cmr: 0x%02x\n", inb(EWRK3_CMR)); + printk(" fmqc: 0x%02x\n", inb(EWRK3_FMQC)); + } + netif_start_queue(dev); + /* + ** Unmask EWRK3 board interrupts + */ + icr = inb(EWRK3_ICR); + ENABLE_IRQs; + + } + } else { + printk(KERN_ERR "%s: ewrk3 available for hard strapped set up only.\n", dev->name); + printk(KERN_ERR " Run the 'ewrk3setup' utility or remove the hard straps.\n"); + return -EINVAL; + } + + return status; +} + +/* + ** Initialize the EtherWORKS 3 operating conditions + */ +static void ewrk3_init(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_char csr, page; + u_long iobase = dev->base_addr; + int i; + + /* + ** Enable any multicasts + */ + set_multicast_list(dev); + + /* + ** Set hardware MAC address. Address is initialized from the EEPROM + ** during startup but may have since been changed by the user. + */ + for (i=0; i<ETH_ALEN; i++) + outb(dev->dev_addr[i], EWRK3_PAR0 + i); + + /* + ** Clean out any remaining entries in all the queues here + */ + while (inb(EWRK3_TQ)); + while (inb(EWRK3_TDQ)); + while (inb(EWRK3_RQ)); + while (inb(EWRK3_FMQ)); + + /* + ** Write a clean free memory queue + */ + for (page = 1; page < lp->mPage; page++) { /* Write the free page numbers */ + outb(page, EWRK3_FMQ); /* to the Free Memory Queue */ + } + + START_EWRK3; /* Enable the TX and/or RX */ +} + +/* + * Transmit timeout + */ + +static void ewrk3_timeout(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_char icr, csr; + u_long iobase = dev->base_addr; + + if (!lp->hard_strapped) + { + printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n", + dev->name, inb(EWRK3_CSR)); + + /* + ** Mask all board interrupts + */ + DISABLE_IRQs; + + /* + ** Stop the TX and RX... + */ + STOP_EWRK3; + + ewrk3_init(dev); + + /* + ** Unmask EWRK3 board interrupts + */ + ENABLE_IRQs; + + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); + } +} + +/* + ** Writes a socket buffer to the free page queue + */ +static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + void __iomem *buf = NULL; + u_char icr; + u_char page; + + spin_lock_irq (&lp->hw_lock); + DISABLE_IRQs; + + /* if no resources available, exit, request packet be queued */ + if (inb (EWRK3_FMQC) == 0) { + printk (KERN_WARNING "%s: ewrk3_queue_pkt(): No free resources...\n", + dev->name); + printk (KERN_WARNING "%s: ewrk3_queue_pkt(): CSR: %02x ICR: %02x FMQC: %02x\n", + dev->name, inb (EWRK3_CSR), inb (EWRK3_ICR), + inb (EWRK3_FMQC)); + goto err_out; + } + + /* + ** Get a free page from the FMQ + */ + if ((page = inb (EWRK3_FMQ)) >= lp->mPage) { + printk ("ewrk3_queue_pkt(): Invalid free memory page (%d).\n", + (u_char) page); + goto err_out; + } + + + /* + ** Set up shared memory window and pointer into the window + */ + if (lp->shmem_length == IO_ONLY) { + outb (page, EWRK3_IOPR); + } else if (lp->shmem_length == SHMEM_2K) { + buf = lp->shmem; + outb (page, EWRK3_MPR); + } else if (lp->shmem_length == SHMEM_32K) { + buf = (((short) page << 11) & 0x7800) + lp->shmem; + outb ((page >> 4), EWRK3_MPR); + } else if (lp->shmem_length == SHMEM_64K) { + buf = (((short) page << 11) & 0xf800) + lp->shmem; + outb ((page >> 5), EWRK3_MPR); + } else { + printk (KERN_ERR "%s: Oops - your private data area is hosed!\n", + dev->name); + BUG (); + } + + /* + ** Set up the buffer control structures and copy the data from + ** the socket buffer to the shared memory . + */ + if (lp->shmem_length == IO_ONLY) { + int i; + u_char *p = skb->data; + outb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), EWRK3_DATA); + outb ((char) (skb->len & 0xff), EWRK3_DATA); + outb ((char) ((skb->len >> 8) & 0xff), EWRK3_DATA); + outb ((char) 0x04, EWRK3_DATA); + for (i = 0; i < skb->len; i++) { + outb (*p++, EWRK3_DATA); + } + outb (page, EWRK3_TQ); /* Start sending pkt */ + } else { + writeb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), buf); /* ctrl byte */ + buf += 1; + writeb ((char) (skb->len & 0xff), buf); /* length (16 bit xfer) */ + buf += 1; + if (lp->txc) { + writeb(((skb->len >> 8) & 0xff) | XCT, buf); + buf += 1; + writeb (0x04, buf); /* index byte */ + buf += 1; + writeb (0x00, (buf + skb->len)); /* Write the XCT flag */ + memcpy_toio (buf, skb->data, PRELOAD); /* Write PRELOAD bytes */ + outb (page, EWRK3_TQ); /* Start sending pkt */ + memcpy_toio (buf + PRELOAD, + skb->data + PRELOAD, + skb->len - PRELOAD); + writeb (0xff, (buf + skb->len)); /* Write the XCT flag */ + } else { + writeb ((skb->len >> 8) & 0xff, buf); + buf += 1; + writeb (0x04, buf); /* index byte */ + buf += 1; + memcpy_toio (buf, skb->data, skb->len); /* Write data bytes */ + outb (page, EWRK3_TQ); /* Start sending pkt */ + } + } + + ENABLE_IRQs; + spin_unlock_irq (&lp->hw_lock); + + dev->stats.tx_bytes += skb->len; + dev_kfree_skb (skb); + + /* Check for free resources: stop Tx queue if there are none */ + if (inb (EWRK3_FMQC) == 0) + netif_stop_queue (dev); + + return NETDEV_TX_OK; + +err_out: + ENABLE_IRQs; + spin_unlock_irq (&lp->hw_lock); + return NETDEV_TX_BUSY; +} + +/* + ** The EWRK3 interrupt handler. + */ +static irqreturn_t ewrk3_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct ewrk3_private *lp; + u_long iobase; + u_char icr, cr, csr; + + lp = netdev_priv(dev); + iobase = dev->base_addr; + + /* get the interrupt information */ + csr = inb(EWRK3_CSR); + + /* + ** Mask the EWRK3 board interrupts and turn on the LED + */ + spin_lock(&lp->hw_lock); + DISABLE_IRQs; + + cr = inb(EWRK3_CR); + cr |= lp->led_mask; + outb(cr, EWRK3_CR); + + if (csr & CSR_RNE) /* Rx interrupt (packet[s] arrived) */ + ewrk3_rx(dev); + + if (csr & CSR_TNE) /* Tx interrupt (packet sent) */ + ewrk3_tx(dev); + + /* + ** Now deal with the TX/RX disable flags. These are set when there + ** are no more resources. If resources free up then enable these + ** interrupts, otherwise mask them - failure to do this will result + ** in the system hanging in an interrupt loop. + */ + if (inb(EWRK3_FMQC)) { /* any resources available? */ + lp->irq_mask |= ICR_TXDM | ICR_RXDM; /* enable the interrupt source */ + csr &= ~(CSR_TXD | CSR_RXD); /* ensure restart of a stalled TX or RX */ + outb(csr, EWRK3_CSR); + netif_wake_queue(dev); + } else { + lp->irq_mask &= ~(ICR_TXDM | ICR_RXDM); /* disable the interrupt source */ + } + + /* Unmask the EWRK3 board interrupts and turn off the LED */ + cr &= ~(lp->led_mask); + outb(cr, EWRK3_CR); + ENABLE_IRQs; + spin_unlock(&lp->hw_lock); + return IRQ_HANDLED; +} + +/* Called with lp->hw_lock held */ +static int ewrk3_rx(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, status = 0; + u_char page; + void __iomem *buf = NULL; + + while (inb(EWRK3_RQC) && !status) { /* Whilst there's incoming data */ + if ((page = inb(EWRK3_RQ)) < lp->mPage) { /* Get next entry's buffer page */ + /* + ** Set up shared memory window and pointer into the window + */ + if (lp->shmem_length == IO_ONLY) { + outb(page, EWRK3_IOPR); + } else if (lp->shmem_length == SHMEM_2K) { + buf = lp->shmem; + outb(page, EWRK3_MPR); + } else if (lp->shmem_length == SHMEM_32K) { + buf = (((short) page << 11) & 0x7800) + lp->shmem; + outb((page >> 4), EWRK3_MPR); + } else if (lp->shmem_length == SHMEM_64K) { + buf = (((short) page << 11) & 0xf800) + lp->shmem; + outb((page >> 5), EWRK3_MPR); + } else { + status = -1; + printk("%s: Oops - your private data area is hosed!\n", dev->name); + } + + if (!status) { + char rx_status; + int pkt_len; + + if (lp->shmem_length == IO_ONLY) { + rx_status = inb(EWRK3_DATA); + pkt_len = inb(EWRK3_DATA); + pkt_len |= ((u_short) inb(EWRK3_DATA) << 8); + } else { + rx_status = readb(buf); + buf += 1; + pkt_len = readw(buf); + buf += 3; + } + + if (!(rx_status & R_ROK)) { /* There was an error. */ + dev->stats.rx_errors++; /* Update the error stats. */ + if (rx_status & R_DBE) + dev->stats.rx_frame_errors++; + if (rx_status & R_CRC) + dev->stats.rx_crc_errors++; + if (rx_status & R_PLL) + dev->stats.rx_fifo_errors++; + } else { + struct sk_buff *skb; + + if ((skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + unsigned char *p; + skb_reserve(skb, 2); /* Align to 16 bytes */ + p = skb_put(skb, pkt_len); + + if (lp->shmem_length == IO_ONLY) { + *p = inb(EWRK3_DATA); /* dummy read */ + for (i = 0; i < pkt_len; i++) { + *p++ = inb(EWRK3_DATA); + } + } else { + memcpy_fromio(p, buf, pkt_len); + } + + for (i = 1; i < EWRK3_PKT_STAT_SZ - 1; i++) { + if (pkt_len < i * EWRK3_PKT_BIN_SZ) { + lp->pktStats.bins[i]++; + i = EWRK3_PKT_STAT_SZ; + } + } + p = skb->data; /* Look at the dest addr */ + if (is_multicast_ether_addr(p)) { + if (is_broadcast_ether_addr(p)) { + lp->pktStats.broadcast++; + } else { + lp->pktStats.multicast++; + } + } else if (compare_ether_addr(p, dev->dev_addr) == 0) { + lp->pktStats.unicast++; + } + lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ + if (lp->pktStats.bins[0] == 0) { /* Reset counters */ + memset(&lp->pktStats, 0, sizeof(lp->pktStats)); + } + /* + ** Notify the upper protocol layers that there is another + ** packet to handle + */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + + /* + ** Update stats + */ + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } else { + printk("%s: Insufficient memory; nuking packet.\n", dev->name); + dev->stats.rx_dropped++; /* Really, deferred. */ + break; + } + } + } + /* + ** Return the received buffer to the free memory queue + */ + outb(page, EWRK3_FMQ); + } else { + printk("ewrk3_rx(): Illegal page number, page %d\n", page); + printk("ewrk3_rx(): CSR: %02x ICR: %02x FMQC: %02x\n", inb(EWRK3_CSR), inb(EWRK3_ICR), inb(EWRK3_FMQC)); + } + } + return status; +} + +/* +** Buffer sent - check for TX buffer errors. +** Called with lp->hw_lock held +*/ +static int ewrk3_tx(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_char tx_status; + + while ((tx_status = inb(EWRK3_TDQ)) > 0) { /* Whilst there's old buffers */ + if (tx_status & T_VSTS) { /* The status is valid */ + if (tx_status & T_TXE) { + dev->stats.tx_errors++; + if (tx_status & T_NCL) + dev->stats.tx_carrier_errors++; + if (tx_status & T_LCL) + dev->stats.tx_window_errors++; + if (tx_status & T_CTU) { + if ((tx_status & T_COLL) ^ T_XUR) { + lp->pktStats.tx_underruns++; + } else { + lp->pktStats.excessive_underruns++; + } + } else if (tx_status & T_COLL) { + if ((tx_status & T_COLL) ^ T_XCOLL) { + dev->stats.collisions++; + } else { + lp->pktStats.excessive_collisions++; + } + } + } else { + dev->stats.tx_packets++; + } + } + } + + return 0; +} + +static int ewrk3_close(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_char icr, csr; + + netif_stop_queue(dev); + + if (ewrk3_debug > 1) { + printk("%s: Shutting down ethercard, status was %2.2x.\n", + dev->name, inb(EWRK3_CSR)); + } + /* + ** We stop the EWRK3 here... mask interrupts and stop TX & RX + */ + DISABLE_IRQs; + + STOP_EWRK3; + + /* + ** Clean out the TX and RX queues here (note that one entry + ** may get added to either the TXD or RX queues if the TX or RX + ** just starts processing a packet before the STOP_EWRK3 command + ** is received. This will be flushed in the ewrk3_open() call). + */ + while (inb(EWRK3_TQ)); + while (inb(EWRK3_TDQ)); + while (inb(EWRK3_RQ)); + + if (!lp->hard_strapped) { + free_irq(dev->irq, dev); + } + return 0; +} + +/* + ** Set or clear the multicast filter for this adapter. + */ +static void set_multicast_list(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_char csr; + + csr = inb(EWRK3_CSR); + + if (lp->shmem_length == IO_ONLY) { + lp->mctbl = NULL; + } else { + lp->mctbl = lp->shmem + PAGE0_HTE; + } + + csr &= ~(CSR_PME | CSR_MCE); + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + csr |= CSR_PME; + outb(csr, EWRK3_CSR); + } else { + SetMulticastFilter(dev); + csr |= CSR_MCE; + outb(csr, EWRK3_CSR); + } +} + +/* + ** Calculate the hash code and update the logical address filter + ** from a list of ethernet multicast addresses. + ** Little endian crc one liner from Matt Thomas, DEC. + ** + ** Note that when clearing the table, the broadcast bit must remain asserted + ** to receive broadcast messages. + */ +static void SetMulticastFilter(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + struct netdev_hw_addr *ha; + u_long iobase = dev->base_addr; + int i; + char bit, byte; + short __iomem *p = lp->mctbl; + u16 hashcode; + u32 crc; + + spin_lock_irq(&lp->hw_lock); + + if (lp->shmem_length == IO_ONLY) { + outb(0, EWRK3_IOPR); + outw(PAGE0_HTE, EWRK3_PIR1); + } else { + outb(0, EWRK3_MPR); + } + + if (dev->flags & IFF_ALLMULTI) { + for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { + if (lp->shmem_length == IO_ONLY) { + outb(0xff, EWRK3_DATA); + } else { /* memset didn't work here */ + writew(0xffff, p); + p++; + i++; + } + } + } else { + /* Clear table except for broadcast bit */ + if (lp->shmem_length == IO_ONLY) { + for (i = 0; i < (HASH_TABLE_LEN >> 4) - 1; i++) { + outb(0x00, EWRK3_DATA); + } + outb(0x80, EWRK3_DATA); + i++; /* insert the broadcast bit */ + for (; i < (HASH_TABLE_LEN >> 3); i++) { + outb(0x00, EWRK3_DATA); + } + } else { + memset_io(lp->mctbl, 0, HASH_TABLE_LEN >> 3); + writeb(0x80, lp->mctbl + (HASH_TABLE_LEN >> 4) - 1); + } + + /* Update table */ + netdev_for_each_mc_addr(ha, dev) { + crc = ether_crc_le(ETH_ALEN, ha->addr); + hashcode = crc & ((1 << 9) - 1); /* hashcode is 9 LSb of CRC */ + + byte = hashcode >> 3; /* bit[3-8] -> byte in filter */ + bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */ + + if (lp->shmem_length == IO_ONLY) { + u_char tmp; + + outw(PAGE0_HTE + byte, EWRK3_PIR1); + tmp = inb(EWRK3_DATA); + tmp |= bit; + outw(PAGE0_HTE + byte, EWRK3_PIR1); + outb(tmp, EWRK3_DATA); + } else { + writeb(readb(lp->mctbl + byte) | bit, lp->mctbl + byte); + } + } + } + + spin_unlock_irq(&lp->hw_lock); +} + +/* + ** ISA bus I/O device probe + */ +static int __init isa_probe(struct net_device *dev, u_long ioaddr) +{ + int i = num_ewrks3s, maxSlots; + int ret = -ENODEV; + + u_long iobase; + + if (ioaddr >= 0x400) + goto out; + + if (ioaddr == 0) { /* Autoprobing */ + iobase = EWRK3_IO_BASE; /* Get the first slot address */ + maxSlots = 24; + } else { /* Probe a specific location */ + iobase = ioaddr; + maxSlots = i + 1; + } + + for (; (i < maxSlots) && (dev != NULL); + iobase += EWRK3_IOP_INC, i++) + { + if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME)) { + if (DevicePresent(iobase) == 0) { + int irq = dev->irq; + ret = ewrk3_hw_init(dev, iobase); + if (!ret) + break; + dev->irq = irq; + } + release_region(iobase, EWRK3_TOTAL_SIZE); + } + } + out: + + return ret; +} + +/* + ** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually + ** the motherboard. + */ +static int __init eisa_probe(struct net_device *dev, u_long ioaddr) +{ + int i, maxSlots; + u_long iobase; + int ret = -ENODEV; + + if (ioaddr < 0x1000) + goto out; + + iobase = ioaddr; + i = (ioaddr >> 12); + maxSlots = i + 1; + + for (i = 1; (i < maxSlots) && (dev != NULL); i++, iobase += EISA_SLOT_INC) { + if (EISA_signature(name, EISA_ID) == 0) { + if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME) && + DevicePresent(iobase) == 0) { + int irq = dev->irq; + ret = ewrk3_hw_init(dev, iobase); + if (!ret) + break; + dev->irq = irq; + } + release_region(iobase, EWRK3_TOTAL_SIZE); + } + } + + out: + return ret; +} + + +/* + ** Read the EWRK3 EEPROM using this routine + */ +static int Read_EEPROM(u_long iobase, u_char eaddr) +{ + int i; + + outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ + outb(EEPROM_RD, EWRK3_IOPR); /* issue read command */ + for (i = 0; i < 5000; i++) + inb(EWRK3_CSR); /* wait 1msec */ + + return inw(EWRK3_EPROM1); /* 16 bits data return */ +} + +/* + ** Write the EWRK3 EEPROM using this routine + */ +static int Write_EEPROM(short data, u_long iobase, u_char eaddr) +{ + int i; + + outb(EEPROM_WR_EN, EWRK3_IOPR); /* issue write enable command */ + for (i = 0; i < 5000; i++) + inb(EWRK3_CSR); /* wait 1msec */ + outw(data, EWRK3_EPROM1); /* write data to register */ + outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ + outb(EEPROM_WR, EWRK3_IOPR); /* issue write command */ + for (i = 0; i < 75000; i++) + inb(EWRK3_CSR); /* wait 15msec */ + outb(EEPROM_WR_DIS, EWRK3_IOPR); /* issue write disable command */ + for (i = 0; i < 5000; i++) + inb(EWRK3_CSR); /* wait 1msec */ + + return 0; +} + +/* + ** Look for a particular board name in the on-board EEPROM. + */ +static void __init EthwrkSignature(char *name, char *eeprom_image) +{ + int i; + char *signatures[] = EWRK3_SIGNATURE; + + for (i=0; *signatures[i] != '\0'; i++) + if( !strncmp(eeprom_image+EEPROM_PNAME7, signatures[i], strlen(signatures[i])) ) + break; + + if (*signatures[i] != '\0') { + memcpy(name, eeprom_image+EEPROM_PNAME7, EWRK3_STRLEN); + name[EWRK3_STRLEN] = '\0'; + } else + name[0] = '\0'; +} + +/* + ** Look for a special sequence in the Ethernet station address PROM that + ** is common across all EWRK3 products. + ** + ** Search the Ethernet address ROM for the signature. Since the ROM address + ** counter can start at an arbitrary point, the search must include the entire + ** probe sequence length plus the (length_of_the_signature - 1). + ** Stop the search IMMEDIATELY after the signature is found so that the + ** PROM address counter is correctly positioned at the start of the + ** ethernet address for later read out. + */ + +static int __init DevicePresent(u_long iobase) +{ + union { + struct { + u32 a; + u32 b; + } llsig; + char Sig[sizeof(u32) << 1]; + } + dev; + short sigLength; + char data; + int i, j, status = 0; + + dev.llsig.a = ETH_PROM_SIG; + dev.llsig.b = ETH_PROM_SIG; + sigLength = sizeof(u32) << 1; + + for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) { + data = inb(EWRK3_APROM); + if (dev.Sig[j] == data) { /* track signature */ + j++; + } else { /* lost signature; begin search again */ + if (data == dev.Sig[0]) { + j = 1; + } else { + j = 0; + } + } + } + + if (j != sigLength) { + status = -ENODEV; /* search failed */ + } + return status; +} + +static u_char __init get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType) +{ + int i, j, k; + u_short chksum; + u_char crc, lfsr, sd, status = 0; + u_long iobase = dev->base_addr; + u16 tmp; + + if (chipType == LeMAC2) { + for (crc = 0x6a, j = 0; j < ETH_ALEN; j++) { + sd = dev->dev_addr[j] = eeprom_image[EEPROM_PADDR0 + j]; + outb(dev->dev_addr[j], EWRK3_PAR0 + j); + for (k = 0; k < 8; k++, sd >>= 1) { + lfsr = ((((crc & 0x02) >> 1) ^ (crc & 0x01)) ^ (sd & 0x01)) << 7; + crc = (crc >> 1) + lfsr; + } + } + if (crc != eeprom_image[EEPROM_PA_CRC]) + status = -1; + } else { + for (i = 0, k = 0; i < ETH_ALEN;) { + k <<= 1; + if (k > 0xffff) + k -= 0xffff; + + k += (u_char) (tmp = inb(EWRK3_APROM)); + dev->dev_addr[i] = (u_char) tmp; + outb(dev->dev_addr[i], EWRK3_PAR0 + i); + i++; + k += (u_short) ((tmp = inb(EWRK3_APROM)) << 8); + dev->dev_addr[i] = (u_char) tmp; + outb(dev->dev_addr[i], EWRK3_PAR0 + i); + i++; + + if (k > 0xffff) + k -= 0xffff; + } + if (k == 0xffff) + k = 0; + chksum = inb(EWRK3_APROM); + chksum |= (inb(EWRK3_APROM) << 8); + if (k != chksum) + status = -1; + } + + return status; +} + +/* + ** Look for a particular board name in the EISA configuration space + */ +static int __init EISA_signature(char *name, s32 eisa_id) +{ + u_long i; + char *signatures[] = EWRK3_SIGNATURE; + char ManCode[EWRK3_STRLEN]; + union { + s32 ID; + char Id[4]; + } Eisa; + int status = 0; + + *name = '\0'; + for (i = 0; i < 4; i++) { + Eisa.Id[i] = inb(eisa_id + i); + } + + ManCode[0] = (((Eisa.Id[0] >> 2) & 0x1f) + 0x40); + ManCode[1] = (((Eisa.Id[1] & 0xe0) >> 5) + ((Eisa.Id[0] & 0x03) << 3) + 0x40); + ManCode[2] = (((Eisa.Id[2] >> 4) & 0x0f) + 0x30); + ManCode[3] = ((Eisa.Id[2] & 0x0f) + 0x30); + ManCode[4] = (((Eisa.Id[3] >> 4) & 0x0f) + 0x30); + ManCode[5] = '\0'; + + for (i = 0; (*signatures[i] != '\0') && (*name == '\0'); i++) { + if (strstr(ManCode, signatures[i]) != NULL) { + strcpy(name, ManCode); + status = 1; + } + } + + return status; /* return the device name string */ +} + +static void ewrk3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->fw_version, "%d", fwrev); + strcpy(info->bus_info, "N/A"); + info->eedump_len = EEPROM_MAX; +} + +static int ewrk3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct ewrk3_private *lp = netdev_priv(dev); + unsigned long iobase = dev->base_addr; + u8 cr = inb(EWRK3_CR); + + switch (lp->adapter_name[4]) { + case '3': /* DE203 */ + ecmd->supported = SUPPORTED_BNC; + ecmd->port = PORT_BNC; + break; + + case '4': /* DE204 */ + ecmd->supported = SUPPORTED_TP; + ecmd->port = PORT_TP; + break; + + case '5': /* DE205 */ + ecmd->supported = SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_AUI; + ecmd->autoneg = !(cr & CR_APD); + /* + ** Port is only valid if autoneg is disabled + ** and even then we don't know if AUI is jumpered. + */ + if (!ecmd->autoneg) + ecmd->port = (cr & CR_PSEL) ? PORT_BNC : PORT_TP; + break; + } + + ecmd->supported |= SUPPORTED_10baseT_Half; + ethtool_cmd_speed_set(ecmd, SPEED_10); + ecmd->duplex = DUPLEX_HALF; + return 0; +} + +static int ewrk3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct ewrk3_private *lp = netdev_priv(dev); + unsigned long iobase = dev->base_addr; + unsigned long flags; + u8 cr; + + /* DE205 is the only card with anything to set */ + if (lp->adapter_name[4] != '5') + return -EOPNOTSUPP; + + /* Sanity-check parameters */ + if (ecmd->speed != SPEED_10) + return -EINVAL; + if (ecmd->port != PORT_TP && ecmd->port != PORT_BNC) + return -EINVAL; /* AUI is not software-selectable */ + if (ecmd->transceiver != XCVR_INTERNAL) + return -EINVAL; + if (ecmd->duplex != DUPLEX_HALF) + return -EINVAL; + if (ecmd->phy_address != 0) + return -EINVAL; + + spin_lock_irqsave(&lp->hw_lock, flags); + cr = inb(EWRK3_CR); + + /* If Autoneg is set, change to Auto Port mode */ + /* Otherwise, disable Auto Port and set port explicitly */ + if (ecmd->autoneg) { + cr &= ~CR_APD; + } else { + cr |= CR_APD; + if (ecmd->port == PORT_TP) + cr &= ~CR_PSEL; /* Force TP */ + else + cr |= CR_PSEL; /* Force BNC */ + } + + /* Commit the changes */ + outb(cr, EWRK3_CR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + return 0; +} + +static u32 ewrk3_get_link(struct net_device *dev) +{ + unsigned long iobase = dev->base_addr; + u8 cmr = inb(EWRK3_CMR); + /* DE203 has BNC only and link status does not apply */ + /* On DE204 this is always valid since TP is the only port. */ + /* On DE205 this reflects TP status even if BNC or AUI is selected. */ + return !(cmr & CMR_LINK); +} + +static int ewrk3_set_phys_id(struct net_device *dev, + enum ethtool_phys_id_state state) +{ + struct ewrk3_private *lp = netdev_priv(dev); + unsigned long iobase = dev->base_addr; + u8 cr; + + spin_lock_irq(&lp->hw_lock); + + switch (state) { + case ETHTOOL_ID_ACTIVE: + /* Prevent ISR from twiddling the LED */ + lp->led_mask = 0; + spin_unlock_irq(&lp->hw_lock); + return 2; /* cycle on/off twice per second */ + + case ETHTOOL_ID_ON: + cr = inb(EWRK3_CR); + outb(cr | CR_LED, EWRK3_CR); + break; + + case ETHTOOL_ID_OFF: + cr = inb(EWRK3_CR); + outb(cr & ~CR_LED, EWRK3_CR); + break; + + case ETHTOOL_ID_INACTIVE: + lp->led_mask = CR_LED; + cr = inb(EWRK3_CR); + outb(cr & ~CR_LED, EWRK3_CR); + } + spin_unlock_irq(&lp->hw_lock); + + return 0; +} + +static const struct ethtool_ops ethtool_ops_203 = { + .get_drvinfo = ewrk3_get_drvinfo, + .get_settings = ewrk3_get_settings, + .set_settings = ewrk3_set_settings, + .set_phys_id = ewrk3_set_phys_id, +}; + +static const struct ethtool_ops ethtool_ops = { + .get_drvinfo = ewrk3_get_drvinfo, + .get_settings = ewrk3_get_settings, + .set_settings = ewrk3_set_settings, + .get_link = ewrk3_get_link, + .set_phys_id = ewrk3_set_phys_id, +}; + +/* + ** Perform IOCTL call functions here. Some are privileged operations and the + ** effective uid is checked in those cases. + */ +static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct ewrk3_private *lp = netdev_priv(dev); + struct ewrk3_ioctl *ioc = (struct ewrk3_ioctl *) &rq->ifr_ifru; + u_long iobase = dev->base_addr; + int i, j, status = 0; + u_char csr; + unsigned long flags; + union ewrk3_addr { + u_char addr[HASH_TABLE_LEN * ETH_ALEN]; + u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1]; + }; + + union ewrk3_addr *tmp; + + /* All we handle are private IOCTLs */ + if (cmd != EWRK3IOCTL) + return -EOPNOTSUPP; + + tmp = kmalloc(sizeof(union ewrk3_addr), GFP_KERNEL); + if(tmp==NULL) + return -ENOMEM; + + switch (ioc->cmd) { + case EWRK3_GET_HWADDR: /* Get the hardware address */ + for (i = 0; i < ETH_ALEN; i++) { + tmp->addr[i] = dev->dev_addr[i]; + } + ioc->len = ETH_ALEN; + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + break; + + case EWRK3_SET_HWADDR: /* Set the hardware address */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + csr = inb(EWRK3_CSR); + csr |= (CSR_TXD | CSR_RXD); + outb(csr, EWRK3_CSR); /* Disable the TX and RX */ + spin_unlock_irqrestore(&lp->hw_lock, flags); + + if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN)) { + status = -EFAULT; + break; + } + spin_lock_irqsave(&lp->hw_lock, flags); + for (i = 0; i < ETH_ALEN; i++) { + dev->dev_addr[i] = tmp->addr[i]; + outb(tmp->addr[i], EWRK3_PAR0 + i); + } + + csr = inb(EWRK3_CSR); + csr &= ~(CSR_TXD | CSR_RXD); /* Enable the TX and RX */ + outb(csr, EWRK3_CSR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_SET_PROM: /* Set Promiscuous Mode */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + csr = inb(EWRK3_CSR); + csr |= CSR_PME; + csr &= ~CSR_MCE; + outb(csr, EWRK3_CSR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_CLR_PROM: /* Clear Promiscuous Mode */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + csr = inb(EWRK3_CSR); + csr &= ~CSR_PME; + outb(csr, EWRK3_CSR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_MCA: /* Get the multicast address table */ + spin_lock_irqsave(&lp->hw_lock, flags); + if (lp->shmem_length == IO_ONLY) { + outb(0, EWRK3_IOPR); + outw(PAGE0_HTE, EWRK3_PIR1); + for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { + tmp->addr[i] = inb(EWRK3_DATA); + } + } else { + outb(0, EWRK3_MPR); + memcpy_fromio(tmp->addr, lp->shmem + PAGE0_HTE, (HASH_TABLE_LEN >> 3)); + } + spin_unlock_irqrestore(&lp->hw_lock, flags); + + ioc->len = (HASH_TABLE_LEN >> 3); + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + + break; + case EWRK3_SET_MCA: /* Set a multicast address */ + if (capable(CAP_NET_ADMIN)) { + if (ioc->len > HASH_TABLE_LEN) { + status = -EINVAL; + break; + } + if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN * ioc->len)) { + status = -EFAULT; + break; + } + set_multicast_list(dev); + } else { + status = -EPERM; + } + + break; + case EWRK3_CLR_MCA: /* Clear all multicast addresses */ + if (capable(CAP_NET_ADMIN)) { + set_multicast_list(dev); + } else { + status = -EPERM; + } + + break; + case EWRK3_MCA_EN: /* Enable multicast addressing */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + csr = inb(EWRK3_CSR); + csr |= CSR_MCE; + csr &= ~CSR_PME; + outb(csr, EWRK3_CSR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_STATS: { /* Get the driver statistics */ + struct ewrk3_stats *tmp_stats = + kmalloc(sizeof(lp->pktStats), GFP_KERNEL); + if (!tmp_stats) { + status = -ENOMEM; + break; + } + + spin_lock_irqsave(&lp->hw_lock, flags); + memcpy(tmp_stats, &lp->pktStats, sizeof(lp->pktStats)); + spin_unlock_irqrestore(&lp->hw_lock, flags); + + ioc->len = sizeof(lp->pktStats); + if (copy_to_user(ioc->data, tmp_stats, sizeof(lp->pktStats))) + status = -EFAULT; + kfree(tmp_stats); + break; + } + case EWRK3_CLR_STATS: /* Zero out the driver statistics */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + memset(&lp->pktStats, 0, sizeof(lp->pktStats)); + spin_unlock_irqrestore(&lp->hw_lock,flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_CSR: /* Get the CSR Register contents */ + tmp->addr[0] = inb(EWRK3_CSR); + ioc->len = 1; + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + break; + case EWRK3_SET_CSR: /* Set the CSR Register contents */ + if (capable(CAP_NET_ADMIN)) { + if (copy_from_user(tmp->addr, ioc->data, 1)) { + status = -EFAULT; + break; + } + outb(tmp->addr[0], EWRK3_CSR); + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_EEPROM: /* Get the EEPROM contents */ + if (capable(CAP_NET_ADMIN)) { + for (i = 0; i < (EEPROM_MAX >> 1); i++) { + tmp->val[i] = (short) Read_EEPROM(iobase, i); + } + i = EEPROM_MAX; + tmp->addr[i++] = inb(EWRK3_CMR); /* Config/Management Reg. */ + for (j = 0; j < ETH_ALEN; j++) { + tmp->addr[i++] = inb(EWRK3_PAR0 + j); + } + ioc->len = EEPROM_MAX + 1 + ETH_ALEN; + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + } else { + status = -EPERM; + } + + break; + case EWRK3_SET_EEPROM: /* Set the EEPROM contents */ + if (capable(CAP_NET_ADMIN)) { + if (copy_from_user(tmp->addr, ioc->data, EEPROM_MAX)) { + status = -EFAULT; + break; + } + for (i = 0; i < (EEPROM_MAX >> 1); i++) { + Write_EEPROM(tmp->val[i], iobase, i); + } + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_CMR: /* Get the CMR Register contents */ + tmp->addr[0] = inb(EWRK3_CMR); + ioc->len = 1; + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + break; + case EWRK3_SET_TX_CUT_THRU: /* Set TX cut through mode */ + if (capable(CAP_NET_ADMIN)) { + lp->txc = 1; + } else { + status = -EPERM; + } + + break; + case EWRK3_CLR_TX_CUT_THRU: /* Clear TX cut through mode */ + if (capable(CAP_NET_ADMIN)) { + lp->txc = 0; + } else { + status = -EPERM; + } + + break; + default: + status = -EOPNOTSUPP; + } + kfree(tmp); + return status; +} + +#ifdef MODULE +static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S]; +static int ndevs; +static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, }; + +/* '21' below should really be 'MAX_NUM_EWRK3S' */ +module_param_array(io, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address(es)"); +MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number(s)"); + +static __exit void ewrk3_exit_module(void) +{ + int i; + + for( i=0; i<ndevs; i++ ) { + struct net_device *dev = ewrk3_devs[i]; + struct ewrk3_private *lp = netdev_priv(dev); + ewrk3_devs[i] = NULL; + unregister_netdev(dev); + release_region(dev->base_addr, EWRK3_TOTAL_SIZE); + iounmap(lp->shmem); + free_netdev(dev); + } +} + +static __init int ewrk3_init_module(void) +{ + int i=0; + + while( io[i] && irq[i] ) { + struct net_device *dev + = alloc_etherdev(sizeof(struct ewrk3_private)); + + if (!dev) + break; + + if (ewrk3_probe1(dev, io[i], irq[i]) != 0) { + free_netdev(dev); + break; + } + + ewrk3_devs[ndevs++] = dev; + i++; + } + + return ndevs ? 0 : -EIO; +} + + +/* Hack for breakage in new module stuff */ +module_exit(ewrk3_exit_module); +module_init(ewrk3_init_module); +#endif /* MODULE */ +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dec/ewrk3.h b/drivers/net/ethernet/dec/ewrk3.h new file mode 100644 index 00000000000..8e0ee906567 --- /dev/null +++ b/drivers/net/ethernet/dec/ewrk3.h @@ -0,0 +1,322 @@ +/* + Written 1994 by David C. Davies. + + Copyright 1994 Digital Equipment Corporation. + + This software may be used and distributed according to the terms of the + GNU General Public License, incorporated herein by reference. + + The author may be reached as davies@wanton.lkg.dec.com or Digital + Equipment Corporation, 550 King Street, Littleton MA 01460. + + ========================================================================= +*/ + +/* +** I/O Address Register Map +*/ +#define EWRK3_CSR iobase+0x00 /* Control and Status Register */ +#define EWRK3_CR iobase+0x01 /* Control Register */ +#define EWRK3_ICR iobase+0x02 /* Interrupt Control Register */ +#define EWRK3_TSR iobase+0x03 /* Transmit Status Register */ +#define EWRK3_RSVD1 iobase+0x04 /* RESERVED */ +#define EWRK3_RSVD2 iobase+0x05 /* RESERVED */ +#define EWRK3_FMQ iobase+0x06 /* Free Memory Queue */ +#define EWRK3_FMQC iobase+0x07 /* Free Memory Queue Counter */ +#define EWRK3_RQ iobase+0x08 /* Receive Queue */ +#define EWRK3_RQC iobase+0x09 /* Receive Queue Counter */ +#define EWRK3_TQ iobase+0x0a /* Transmit Queue */ +#define EWRK3_TQC iobase+0x0b /* Transmit Queue Counter */ +#define EWRK3_TDQ iobase+0x0c /* Transmit Done Queue */ +#define EWRK3_TDQC iobase+0x0d /* Transmit Done Queue Counter */ +#define EWRK3_PIR1 iobase+0x0e /* Page Index Register 1 */ +#define EWRK3_PIR2 iobase+0x0f /* Page Index Register 2 */ +#define EWRK3_DATA iobase+0x10 /* Data Register */ +#define EWRK3_IOPR iobase+0x11 /* I/O Page Register */ +#define EWRK3_IOBR iobase+0x12 /* I/O Base Register */ +#define EWRK3_MPR iobase+0x13 /* Memory Page Register */ +#define EWRK3_MBR iobase+0x14 /* Memory Base Register */ +#define EWRK3_APROM iobase+0x15 /* Address PROM */ +#define EWRK3_EPROM1 iobase+0x16 /* EEPROM Data Register 1 */ +#define EWRK3_EPROM2 iobase+0x17 /* EEPROM Data Register 2 */ +#define EWRK3_PAR0 iobase+0x18 /* Physical Address Register 0 */ +#define EWRK3_PAR1 iobase+0x19 /* Physical Address Register 1 */ +#define EWRK3_PAR2 iobase+0x1a /* Physical Address Register 2 */ +#define EWRK3_PAR3 iobase+0x1b /* Physical Address Register 3 */ +#define EWRK3_PAR4 iobase+0x1c /* Physical Address Register 4 */ +#define EWRK3_PAR5 iobase+0x1d /* Physical Address Register 5 */ +#define EWRK3_CMR iobase+0x1e /* Configuration/Management Register */ + +/* +** Control Page Map +*/ +#define PAGE0_FMQ 0x000 /* Free Memory Queue */ +#define PAGE0_RQ 0x080 /* Receive Queue */ +#define PAGE0_TQ 0x100 /* Transmit Queue */ +#define PAGE0_TDQ 0x180 /* Transmit Done Queue */ +#define PAGE0_HTE 0x200 /* Hash Table Entries */ +#define PAGE0_RSVD 0x240 /* RESERVED */ +#define PAGE0_USRD 0x600 /* User Data */ + +/* +** Control and Status Register bit definitions (EWRK3_CSR) +*/ +#define CSR_RA 0x80 /* Runt Accept */ +#define CSR_PME 0x40 /* Promiscuous Mode Enable */ +#define CSR_MCE 0x20 /* Multicast Enable */ +#define CSR_TNE 0x08 /* TX Done Queue Not Empty */ +#define CSR_RNE 0x04 /* RX Queue Not Empty */ +#define CSR_TXD 0x02 /* TX Disable */ +#define CSR_RXD 0x01 /* RX Disable */ + +/* +** Control Register bit definitions (EWRK3_CR) +*/ +#define CR_APD 0x80 /* Auto Port Disable */ +#define CR_PSEL 0x40 /* Port Select (0->TP port) */ +#define CR_LBCK 0x20 /* LoopBaCK enable */ +#define CR_FDUP 0x10 /* Full DUPlex enable */ +#define CR_FBUS 0x08 /* Fast BUS enable (ISA clk > 8.33MHz) */ +#define CR_EN_16 0x04 /* ENable 16 bit memory accesses */ +#define CR_LED 0x02 /* LED (1-> turn on) */ + +/* +** Interrupt Control Register bit definitions (EWRK3_ICR) +*/ +#define ICR_IE 0x80 /* Interrupt Enable */ +#define ICR_IS 0x60 /* Interrupt Selected */ +#define ICR_TNEM 0x08 /* TNE Mask (0->mask) */ +#define ICR_RNEM 0x04 /* RNE Mask (0->mask) */ +#define ICR_TXDM 0x02 /* TXD Mask (0->mask) */ +#define ICR_RXDM 0x01 /* RXD Mask (0->mask) */ + +/* +** Transmit Status Register bit definitions (EWRK3_TSR) +*/ +#define TSR_NCL 0x80 /* No Carrier Loopback */ +#define TSR_ID 0x40 /* Initially Deferred */ +#define TSR_LCL 0x20 /* Late CoLlision */ +#define TSR_ECL 0x10 /* Excessive CoLlisions */ +#define TSR_RCNTR 0x0f /* Retries CouNTeR */ + +/* +** I/O Page Register bit definitions (EWRK3_IOPR) +*/ +#define EEPROM_INIT 0xc0 /* EEPROM INIT command */ +#define EEPROM_WR_EN 0xc8 /* EEPROM WRITE ENABLE command */ +#define EEPROM_WR 0xd0 /* EEPROM WRITE command */ +#define EEPROM_WR_DIS 0xd8 /* EEPROM WRITE DISABLE command */ +#define EEPROM_RD 0xe0 /* EEPROM READ command */ + +/* +** I/O Base Register bit definitions (EWRK3_IOBR) +*/ +#define EISA_REGS_EN 0x20 /* Enable EISA ID and Control Registers */ +#define EISA_IOB 0x1f /* Compare bits for I/O Base Address */ + +/* +** I/O Configuration/Management Register bit definitions (EWRK3_CMR) +*/ +#define CMR_RA 0x80 /* Read Ahead */ +#define CMR_WB 0x40 /* Write Behind */ +#define CMR_LINK 0x20 /* 0->TP */ +#define CMR_POLARITY 0x10 /* Informational */ +#define CMR_NO_EEPROM 0x0c /* NO_EEPROM<1:0> pin status */ +#define CMR_HS 0x08 /* Hard Strapped pin status (LeMAC2) */ +#define CMR_PNP 0x04 /* Plug 'n Play */ +#define CMR_DRAM 0x02 /* 0-> 1DRAM, 1-> 2 DRAM on board */ +#define CMR_0WS 0x01 /* Zero Wait State */ + +/* +** MAC Receive Status Register bit definitions +*/ + +#define R_ROK 0x80 /* Receive OK summary */ +#define R_IAM 0x10 /* Individual Address Match */ +#define R_MCM 0x08 /* MultiCast Match */ +#define R_DBE 0x04 /* Dribble Bit Error */ +#define R_CRC 0x02 /* CRC error */ +#define R_PLL 0x01 /* Phase Lock Lost */ + +/* +** MAC Transmit Control Register bit definitions +*/ + +#define TCR_SQEE 0x40 /* SQE Enable - look for heartbeat */ +#define TCR_SED 0x20 /* Stop when Error Detected */ +#define TCR_QMODE 0x10 /* Q_MODE */ +#define TCR_LAB 0x08 /* Less Aggressive Backoff */ +#define TCR_PAD 0x04 /* PAD Runt Packets */ +#define TCR_IFC 0x02 /* Insert Frame Check */ +#define TCR_ISA 0x01 /* Insert Source Address */ + +/* +** MAC Transmit Status Register bit definitions +*/ + +#define T_VSTS 0x80 /* Valid STatuS */ +#define T_CTU 0x40 /* Cut Through Used */ +#define T_SQE 0x20 /* Signal Quality Error */ +#define T_NCL 0x10 /* No Carrier Loopback */ +#define T_LCL 0x08 /* Late Collision */ +#define T_ID 0x04 /* Initially Deferred */ +#define T_COLL 0x03 /* COLLision status */ +#define T_XCOLL 0x03 /* Excessive Collisions */ +#define T_MCOLL 0x02 /* Multiple Collisions */ +#define T_OCOLL 0x01 /* One Collision */ +#define T_NOCOLL 0x00 /* No Collisions */ +#define T_XUR 0x03 /* Excessive Underruns */ +#define T_TXE 0x7f /* TX Errors */ + +/* +** EISA Configuration Register bit definitions +*/ + +#define EISA_ID iobase + 0x0c80 /* EISA ID Registers */ +#define EISA_ID0 iobase + 0x0c80 /* EISA ID Register 0 */ +#define EISA_ID1 iobase + 0x0c81 /* EISA ID Register 1 */ +#define EISA_ID2 iobase + 0x0c82 /* EISA ID Register 2 */ +#define EISA_ID3 iobase + 0x0c83 /* EISA ID Register 3 */ +#define EISA_CR iobase + 0x0c84 /* EISA Control Register */ + +/* +** EEPROM BYTES +*/ +#define EEPROM_MEMB 0x00 +#define EEPROM_IOB 0x01 +#define EEPROM_EISA_ID0 0x02 +#define EEPROM_EISA_ID1 0x03 +#define EEPROM_EISA_ID2 0x04 +#define EEPROM_EISA_ID3 0x05 +#define EEPROM_MISC0 0x06 +#define EEPROM_MISC1 0x07 +#define EEPROM_PNAME7 0x08 +#define EEPROM_PNAME6 0x09 +#define EEPROM_PNAME5 0x0a +#define EEPROM_PNAME4 0x0b +#define EEPROM_PNAME3 0x0c +#define EEPROM_PNAME2 0x0d +#define EEPROM_PNAME1 0x0e +#define EEPROM_PNAME0 0x0f +#define EEPROM_SWFLAGS 0x10 +#define EEPROM_HWCAT 0x11 +#define EEPROM_NETMAN2 0x12 +#define EEPROM_REVLVL 0x13 +#define EEPROM_NETMAN0 0x14 +#define EEPROM_NETMAN1 0x15 +#define EEPROM_CHIPVER 0x16 +#define EEPROM_SETUP 0x17 +#define EEPROM_PADDR0 0x18 +#define EEPROM_PADDR1 0x19 +#define EEPROM_PADDR2 0x1a +#define EEPROM_PADDR3 0x1b +#define EEPROM_PADDR4 0x1c +#define EEPROM_PADDR5 0x1d +#define EEPROM_PA_CRC 0x1e +#define EEPROM_CHKSUM 0x1f + +/* +** EEPROM bytes for checksumming +*/ +#define EEPROM_MAX 32 /* bytes */ + +/* +** EEPROM MISCELLANEOUS FLAGS +*/ +#define RBE_SHADOW 0x0100 /* Remote Boot Enable Shadow */ +#define READ_AHEAD 0x0080 /* Read Ahead feature */ +#define IRQ_SEL2 0x0070 /* IRQ line selection (LeMAC2) */ +#define IRQ_SEL 0x0060 /* IRQ line selection */ +#define FAST_BUS 0x0008 /* ISA Bus speeds > 8.33MHz */ +#define ENA_16 0x0004 /* Enables 16 bit memory transfers */ +#define WRITE_BEHIND 0x0002 /* Write Behind feature */ +#define _0WS_ENA 0x0001 /* Zero Wait State Enable */ + +/* +** EEPROM NETWORK MANAGEMENT FLAGS +*/ +#define NETMAN_POL 0x04 /* Polarity defeat */ +#define NETMAN_LINK 0x02 /* Link defeat */ +#define NETMAN_CCE 0x01 /* Custom Counters Enable */ + +/* +** EEPROM SW FLAGS +*/ +#define SW_SQE 0x10 /* Signal Quality Error */ +#define SW_LAB 0x08 /* Less Aggressive Backoff */ +#define SW_INIT 0x04 /* Initialized */ +#define SW_TIMEOUT 0x02 /* 0:2.5 mins, 1: 30 secs */ +#define SW_REMOTE 0x01 /* Remote Boot Enable -> 1 */ + +/* +** EEPROM SETUP FLAGS +*/ +#define SETUP_APD 0x80 /* AutoPort Disable */ +#define SETUP_PS 0x40 /* Port Select */ +#define SETUP_MP 0x20 /* MultiPort */ +#define SETUP_1TP 0x10 /* 1 port, TP */ +#define SETUP_1COAX 0x00 /* 1 port, Coax */ +#define SETUP_DRAM 0x02 /* Number of DRAMS on board */ + +/* +** EEPROM MANAGEMENT FLAGS +*/ +#define MGMT_CCE 0x01 /* Custom Counters Enable */ + +/* +** EEPROM VERSIONS +*/ +#define LeMAC 0x11 +#define LeMAC2 0x12 + +/* +** Miscellaneous +*/ + +#define EEPROM_WAIT_TIME 1000 /* Number of microseconds */ +#define EISA_EN 0x0001 /* Enable EISA bus buffers */ + +#define HASH_TABLE_LEN 512 /* Bits */ + +#define XCT 0x80 /* Transmit Cut Through */ +#define PRELOAD 16 /* 4 long words */ + +#define MASK_INTERRUPTS 1 +#define UNMASK_INTERRUPTS 0 + +#define EEPROM_OFFSET(a) ((u_short)((u_long)(a))) + +/* +** Include the IOCTL stuff +*/ +#include <linux/sockios.h> + +#define EWRK3IOCTL SIOCDEVPRIVATE + +struct ewrk3_ioctl { + unsigned short cmd; /* Command to run */ + unsigned short len; /* Length of the data buffer */ + unsigned char __user *data; /* Pointer to the data buffer */ +}; + +/* +** Recognised commands for the driver +*/ +#define EWRK3_GET_HWADDR 0x01 /* Get the hardware address */ +#define EWRK3_SET_HWADDR 0x02 /* Get the hardware address */ +#define EWRK3_SET_PROM 0x03 /* Set Promiscuous Mode */ +#define EWRK3_CLR_PROM 0x04 /* Clear Promiscuous Mode */ +#define EWRK3_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ +#define EWRK3_GET_MCA 0x06 /* Get a multicast address */ +#define EWRK3_SET_MCA 0x07 /* Set a multicast address */ +#define EWRK3_CLR_MCA 0x08 /* Clear a multicast address */ +#define EWRK3_MCA_EN 0x09 /* Enable a multicast address group */ +#define EWRK3_GET_STATS 0x0a /* Get the driver statistics */ +#define EWRK3_CLR_STATS 0x0b /* Zero out the driver statistics */ +#define EWRK3_GET_CSR 0x0c /* Get the CSR Register contents */ +#define EWRK3_SET_CSR 0x0d /* Set the CSR Register contents */ +#define EWRK3_GET_EEPROM 0x0e /* Get the EEPROM contents */ +#define EWRK3_SET_EEPROM 0x0f /* Set the EEPROM contents */ +#define EWRK3_GET_CMR 0x10 /* Get the CMR Register contents */ +#define EWRK3_CLR_TX_CUT_THRU 0x11 /* Clear the TX cut through mode */ +#define EWRK3_SET_TX_CUT_THRU 0x12 /* Set the TX cut through mode */ diff --git a/drivers/net/ethernet/dec/tulip/21142.c b/drivers/net/ethernet/dec/tulip/21142.c new file mode 100644 index 00000000000..092c3faa882 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/21142.c @@ -0,0 +1,260 @@ +/* + drivers/net/tulip/21142.c + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + + DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller + Hardware Reference Manual" is currently available at : + http://developer.intel.com/design/network/manuals/278074.htm + + Please submit bugs to http://bugzilla.kernel.org/ . +*/ + +#include <linux/delay.h> +#include "tulip.h" + + +static u16 t21142_csr13[] = { 0x0001, 0x0009, 0x0009, 0x0000, 0x0001, }; +u16 t21142_csr14[] = { 0xFFFF, 0x0705, 0x0705, 0x0000, 0x7F3D, }; +static u16 t21142_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; + + +/* Handle the 21143 uniquely: do autoselect with NWay, not the EEPROM list + of available transceivers. */ +void t21142_media_task(struct work_struct *work) +{ + struct tulip_private *tp = + container_of(work, struct tulip_private, media_work); + struct net_device *dev = tp->dev; + void __iomem *ioaddr = tp->base_addr; + int csr12 = ioread32(ioaddr + CSR12); + int next_tick = 60*HZ; + int new_csr6 = 0; + int csr14 = ioread32(ioaddr + CSR14); + + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; + if (tulip_debug > 2) + dev_info(&dev->dev, "21143 negotiation status %08x, %s\n", + csr12, medianame[dev->if_port]); + if (tulip_media_cap[dev->if_port] & MediaIsMII) { + if (tulip_check_duplex(dev) < 0) { + netif_carrier_off(dev); + next_tick = 3*HZ; + } else { + netif_carrier_on(dev); + next_tick = 60*HZ; + } + } else if (tp->nwayset) { + /* Don't screw up a negotiated session! */ + if (tulip_debug > 1) + dev_info(&dev->dev, + "Using NWay-set %s media, csr12 %08x\n", + medianame[dev->if_port], csr12); + } else if (tp->medialock) { + ; + } else if (dev->if_port == 3) { + if (csr12 & 2) { /* No 100mbps link beat, revert to 10mbps. */ + if (tulip_debug > 1) + dev_info(&dev->dev, + "No 21143 100baseTx link beat, %08x, trying NWay\n", + csr12); + t21142_start_nway(dev); + next_tick = 3*HZ; + } + } else if ((csr12 & 0x7000) != 0x5000) { + /* Negotiation failed. Search media types. */ + if (tulip_debug > 1) + dev_info(&dev->dev, + "21143 negotiation failed, status %08x\n", + csr12); + if (!(csr12 & 4)) { /* 10mbps link beat good. */ + new_csr6 = 0x82420000; + dev->if_port = 0; + iowrite32(0, ioaddr + CSR13); + iowrite32(0x0003FFFF, ioaddr + CSR14); + iowrite16(t21142_csr15[dev->if_port], ioaddr + CSR15); + iowrite32(t21142_csr13[dev->if_port], ioaddr + CSR13); + } else { + /* Select 100mbps port to check for link beat. */ + new_csr6 = 0x83860000; + dev->if_port = 3; + iowrite32(0, ioaddr + CSR13); + iowrite32(0x0003FFFF, ioaddr + CSR14); + iowrite16(8, ioaddr + CSR15); + iowrite32(1, ioaddr + CSR13); + } + if (tulip_debug > 1) + dev_info(&dev->dev, "Testing new 21143 media %s\n", + medianame[dev->if_port]); + if (new_csr6 != (tp->csr6 & ~0x00D5)) { + tp->csr6 &= 0x00D5; + tp->csr6 |= new_csr6; + iowrite32(0x0301, ioaddr + CSR12); + tulip_restart_rxtx(tp); + } + next_tick = 3*HZ; + } + + /* mod_timer synchronizes us with potential add_timer calls + * from interrupts. + */ + mod_timer(&tp->timer, RUN_AT(next_tick)); +} + + +void t21142_start_nway(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr14 = ((tp->sym_advertise & 0x0780) << 9) | + ((tp->sym_advertise & 0x0020) << 1) | 0xffbf; + + dev->if_port = 0; + tp->nway = tp->mediasense = 1; + tp->nwayset = tp->lpar = 0; + if (tulip_debug > 1) + netdev_dbg(dev, "Restarting 21143 autonegotiation, csr14=%08x\n", + csr14); + iowrite32(0x0001, ioaddr + CSR13); + udelay(100); + iowrite32(csr14, ioaddr + CSR14); + tp->csr6 = 0x82420000 | (tp->sym_advertise & 0x0040 ? FullDuplex : 0); + iowrite32(tp->csr6, ioaddr + CSR6); + if (tp->mtable && tp->mtable->csr15dir) { + iowrite32(tp->mtable->csr15dir, ioaddr + CSR15); + iowrite32(tp->mtable->csr15val, ioaddr + CSR15); + } else + iowrite16(0x0008, ioaddr + CSR15); + iowrite32(0x1301, ioaddr + CSR12); /* Trigger NWAY. */ +} + + + +void t21142_lnk_change(struct net_device *dev, int csr5) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr12 = ioread32(ioaddr + CSR12); + int csr14 = ioread32(ioaddr + CSR14); + + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; + if (tulip_debug > 1) + dev_info(&dev->dev, + "21143 link status interrupt %08x, CSR5 %x, %08x\n", + csr12, csr5, csr14); + + /* If NWay finished and we have a negotiated partner capability. */ + if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) { + int setup_done = 0; + int negotiated = tp->sym_advertise & (csr12 >> 16); + tp->lpar = csr12 >> 16; + tp->nwayset = 1; + /* If partner cannot negotiate, it is 10Mbps Half Duplex */ + if (!(csr12 & 0x8000)) dev->if_port = 0; + else if (negotiated & 0x0100) dev->if_port = 5; + else if (negotiated & 0x0080) dev->if_port = 3; + else if (negotiated & 0x0040) dev->if_port = 4; + else if (negotiated & 0x0020) dev->if_port = 0; + else { + tp->nwayset = 0; + if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180)) + dev->if_port = 3; + } + tp->full_duplex = (tulip_media_cap[dev->if_port] & MediaAlwaysFD) ? 1:0; + + if (tulip_debug > 1) { + if (tp->nwayset) + dev_info(&dev->dev, + "Switching to %s based on link negotiation %04x & %04x = %04x\n", + medianame[dev->if_port], + tp->sym_advertise, tp->lpar, + negotiated); + else + dev_info(&dev->dev, + "Autonegotiation failed, using %s, link beat status %04x\n", + medianame[dev->if_port], csr12); + } + + if (tp->mtable) { + int i; + for (i = 0; i < tp->mtable->leafcount; i++) + if (tp->mtable->mleaf[i].media == dev->if_port) { + int startup = ! ((tp->chip_id == DC21143 && (tp->revision == 48 || tp->revision == 65))); + tp->cur_index = i; + tulip_select_media(dev, startup); + setup_done = 1; + break; + } + } + if ( ! setup_done) { + tp->csr6 = (dev->if_port & 1 ? 0x838E0000 : 0x82420000) | (tp->csr6 & 0x20ff); + if (tp->full_duplex) + tp->csr6 |= 0x0200; + iowrite32(1, ioaddr + CSR13); + } +#if 0 /* Restart shouldn't be needed. */ + iowrite32(tp->csr6 | RxOn, ioaddr + CSR6); + if (tulip_debug > 2) + netdev_dbg(dev, " Restarting Tx and Rx, CSR5 is %08x\n", + ioread32(ioaddr + CSR5)); +#endif + tulip_start_rxtx(tp); + if (tulip_debug > 2) + netdev_dbg(dev, " Setting CSR6 %08x/%x CSR12 %08x\n", + tp->csr6, ioread32(ioaddr + CSR6), + ioread32(ioaddr + CSR12)); + } else if ((tp->nwayset && (csr5 & 0x08000000) && + (dev->if_port == 3 || dev->if_port == 5) && + (csr12 & 2) == 2) || + (tp->nway && (csr5 & (TPLnkFail)))) { + /* Link blew? Maybe restart NWay. */ + del_timer_sync(&tp->timer); + t21142_start_nway(dev); + tp->timer.expires = RUN_AT(3*HZ); + add_timer(&tp->timer); + } else if (dev->if_port == 3 || dev->if_port == 5) { + if (tulip_debug > 1) + dev_info(&dev->dev, "21143 %s link beat %s\n", + medianame[dev->if_port], + (csr12 & 2) ? "failed" : "good"); + if ((csr12 & 2) && ! tp->medialock) { + del_timer_sync(&tp->timer); + t21142_start_nway(dev); + tp->timer.expires = RUN_AT(3*HZ); + add_timer(&tp->timer); + } else if (dev->if_port == 5) + iowrite32(csr14 & ~0x080, ioaddr + CSR14); + } else if (dev->if_port == 0 || dev->if_port == 4) { + if ((csr12 & 4) == 0) + dev_info(&dev->dev, "21143 10baseT link beat good\n"); + } else if (!(csr12 & 4)) { /* 10mbps link beat good. */ + if (tulip_debug) + dev_info(&dev->dev, "21143 10mbps sensed media\n"); + dev->if_port = 0; + } else if (tp->nwayset) { + if (tulip_debug) + dev_info(&dev->dev, "21143 using NWay-set %s, csr6 %08x\n", + medianame[dev->if_port], tp->csr6); + } else { /* 100mbps link beat good. */ + if (tulip_debug) + dev_info(&dev->dev, "21143 100baseTx sensed media\n"); + dev->if_port = 3; + tp->csr6 = 0x838E0000 | (tp->csr6 & 0x20ff); + iowrite32(0x0003FF7F, ioaddr + CSR14); + iowrite32(0x0301, ioaddr + CSR12); + tulip_restart_rxtx(tp); + } +} + + diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig new file mode 100644 index 00000000000..f6af772b12c --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/Kconfig @@ -0,0 +1,171 @@ +# +# Tulip family network device configuration +# + +config NET_TULIP + bool "DEC - Tulip devices" + depends on (PCI || EISA || CARDBUS) + ---help--- + This selects the "Tulip" family of EISA/PCI network cards. + +if NET_TULIP + +config DE2104X + tristate "Early DECchip Tulip (dc2104x) PCI support" + depends on PCI + select CRC32 + ---help--- + This driver is developed for the SMC EtherPower series Ethernet + cards and also works with cards based on the DECchip + 21040 (Tulip series) chips. Some LinkSys PCI cards are + of this type. (If your card is NOT SMC EtherPower 10/100 PCI + (smc9332dst), you can also try the driver for "Generic DECchip" + cards, below. However, most people with a network card of this type + will say Y here.) Do read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module will + be called de2104x. + +config DE2104X_DSL + int "Descriptor Skip Length in 32 bit longwords" + depends on DE2104X + range 0 31 + default 0 + ---help--- + Setting this value allows to align ring buffer descriptors into their + own cache lines. Value of 4 corresponds to the typical 32 byte line + (the descriptor is 16 bytes). This is necessary on systems that lack + cache coherence, an example is PowerMac 5500. Otherwise 0 is safe. + Default is 0, and range is 0 to 31. + +config TULIP + tristate "DECchip Tulip (dc2114x) PCI support" + depends on PCI + select CRC32 + ---help--- + This driver is developed for the SMC EtherPower series Ethernet + cards and also works with cards based on the DECchip + 21140 (Tulip series) chips. Some LinkSys PCI cards are + of this type. (If your card is NOT SMC EtherPower 10/100 PCI + (smc9332dst), you can also try the driver for "Generic DECchip" + cards, above. However, most people with a network card of this type + will say Y here.) Do read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module will + be called tulip. + +config TULIP_MWI + bool "New bus configuration (EXPERIMENTAL)" + depends on TULIP && EXPERIMENTAL + ---help--- + This configures your Tulip card specifically for the card and + system cache line size type you are using. + + This is experimental code, not yet tested on many boards. + + If unsure, say N. + +config TULIP_MMIO + bool "Use PCI shared mem for NIC registers" + depends on TULIP + ---help--- + Use PCI shared memory for the NIC registers, rather than going through + the Tulip's PIO (programmed I/O ports). Faster, but could produce + obscure bugs if your mainboard has memory controller timing issues. + If in doubt, say N. + +config TULIP_NAPI + bool "Use RX polling (NAPI)" + depends on TULIP + ---help--- + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + If in doubt, say N. + +config TULIP_NAPI_HW_MITIGATION + bool "Use Interrupt Mitigation" + depends on TULIP_NAPI + ---help--- + Use HW to reduce RX interrupts. Not strictly necessary since NAPI + reduces RX interrupts by itself. Interrupt mitigation reduces RX + interrupts even at low levels of traffic at the cost of a small + latency. + + If in doubt, say Y. + +config TULIP_DM910X + def_bool y + depends on TULIP && SPARC + +config DE4X5 + tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA" + depends on (PCI || EISA) + select CRC32 + ---help--- + This is support for the DIGITAL series of PCI/EISA Ethernet cards. + These include the DE425, DE434, DE435, DE450 and DE500 models. If + you have a network card of this type, say Y and read the + Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. More specific + information is contained in + <file:Documentation/networking/de4x5.txt>. + + To compile this driver as a module, choose M here. The module will + be called de4x5. + +config WINBOND_840 + tristate "Winbond W89c840 Ethernet support" + depends on PCI + select CRC32 + select MII + ---help--- + This driver is for the Winbond W89c840 chip. It also works with + the TX9882 chip on the Compex RL100-ATX board. + More specific information and updates are available from + <http://www.scyld.com/network/drivers.html>. + +config DM9102 + tristate "Davicom DM910x/DM980x support" + depends on PCI + select CRC32 + ---help--- + This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from + Davicom (<http://www.davicom.com.tw/>). If you have such a network + (Ethernet) card, say Y. Some information is contained in the file + <file:Documentation/networking/dmfe.txt>. + + To compile this driver as a module, choose M here. The module will + be called dmfe. + +config ULI526X + tristate "ULi M526x controller support" + depends on PCI + select CRC32 + ---help--- + This driver is for ULi M5261/M5263 10/100M Ethernet Controller + (<http://www.nvidia.com/page/uli_drivers.html>). + + To compile this driver as a module, choose M here. The module will + be called uli526x. + +config PCMCIA_XIRCOM + tristate "Xircom CardBus support" + depends on CARDBUS + ---help--- + This driver is for the Digital "Tulip" Ethernet CardBus adapters. + It should work with most DEC 21*4*-based chips/ethercards, as well + as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and + ASIX. + + To compile this driver as a module, choose M here. The module will + be called xircom_cb. If unsure, say N. + +endif # NET_TULIP diff --git a/drivers/net/ethernet/dec/tulip/Makefile b/drivers/net/ethernet/dec/tulip/Makefile new file mode 100644 index 00000000000..5e8be38b45b --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the Linux "Tulip" family network device drivers. +# + +ccflags-$(CONFIG_NET_TULIP) := -DDEBUG + +obj-$(CONFIG_PCMCIA_XIRCOM) += xircom_cb.o +obj-$(CONFIG_DM9102) += dmfe.o +obj-$(CONFIG_WINBOND_840) += winbond-840.o +obj-$(CONFIG_DE2104X) += de2104x.o +obj-$(CONFIG_TULIP) += tulip.o +obj-$(CONFIG_DE4X5) += de4x5.o +obj-$(CONFIG_ULI526X) += uli526x.o + +# Declare multi-part drivers. + +tulip-objs := eeprom.o interrupt.o media.o \ + timer.o tulip_core.o \ + 21142.o pnic.o pnic2.o diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c new file mode 100644 index 00000000000..ce90efc6ba3 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/de2104x.c @@ -0,0 +1,2215 @@ +/* de2104x.c: A Linux PCI Ethernet driver for Intel/Digital 21040/1 chips. */ +/* + Copyright 2001,2003 Jeff Garzik <jgarzik@pobox.com> + + Copyright 1994, 1995 Digital Equipment Corporation. [de4x5.c] + Written/copyright 1994-2001 by Donald Becker. [tulip.c] + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + See the file COPYING in this distribution for more information. + + TODO, in rough priority order: + * Support forcing media type with a module parameter, + like dl2k.c/sundance.c + * Constants (module parms?) for Rx work limit + * Complete reset on PciErr + * Jumbo frames / dev->change_mtu + * Adjust Rx FIFO threshold and Max Rx DMA burst on Rx FIFO error + * Adjust Tx FIFO threshold and Max Tx DMA burst on Tx FIFO error + * Implement Tx software interrupt mitigation via + Tx descriptor bit + + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "de2104x" +#define DRV_VERSION "0.7" +#define DRV_RELDATE "Mar 17, 2004" + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/compiler.h> +#include <linux/rtnetlink.h> +#include <linux/crc32.h> +#include <linux/slab.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/unaligned.h> + +/* These identify the driver base version and may not be removed. */ +static char version[] = +"PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")"; + +MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>"); +MODULE_DESCRIPTION("Intel/Digital 21040/1 series PCI Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +static int debug = -1; +module_param (debug, int, 0); +MODULE_PARM_DESC (debug, "de2104x bitmapped message enable number"); + +/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */ +#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \ + defined(CONFIG_SPARC) || defined(__ia64__) || \ + defined(__sh__) || defined(__mips__) +static int rx_copybreak = 1518; +#else +static int rx_copybreak = 100; +#endif +module_param (rx_copybreak, int, 0); +MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copied"); + +#define DE_DEF_MSG_ENABLE (NETIF_MSG_DRV | \ + NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | \ + NETIF_MSG_IFDOWN | \ + NETIF_MSG_IFUP | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) + +/* Descriptor skip length in 32 bit longwords. */ +#ifndef CONFIG_DE2104X_DSL +#define DSL 0 +#else +#define DSL CONFIG_DE2104X_DSL +#endif + +#define DE_RX_RING_SIZE 64 +#define DE_TX_RING_SIZE 64 +#define DE_RING_BYTES \ + ((sizeof(struct de_desc) * DE_RX_RING_SIZE) + \ + (sizeof(struct de_desc) * DE_TX_RING_SIZE)) +#define NEXT_TX(N) (((N) + 1) & (DE_TX_RING_SIZE - 1)) +#define NEXT_RX(N) (((N) + 1) & (DE_RX_RING_SIZE - 1)) +#define TX_BUFFS_AVAIL(CP) \ + (((CP)->tx_tail <= (CP)->tx_head) ? \ + (CP)->tx_tail + (DE_TX_RING_SIZE - 1) - (CP)->tx_head : \ + (CP)->tx_tail - (CP)->tx_head - 1) + +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ +#define RX_OFFSET 2 + +#define DE_SETUP_SKB ((struct sk_buff *) 1) +#define DE_DUMMY_SKB ((struct sk_buff *) 2) +#define DE_SETUP_FRAME_WORDS 96 +#define DE_EEPROM_WORDS 256 +#define DE_EEPROM_SIZE (DE_EEPROM_WORDS * sizeof(u16)) +#define DE_MAX_MEDIA 5 + +#define DE_MEDIA_TP_AUTO 0 +#define DE_MEDIA_BNC 1 +#define DE_MEDIA_AUI 2 +#define DE_MEDIA_TP 3 +#define DE_MEDIA_TP_FD 4 +#define DE_MEDIA_INVALID DE_MAX_MEDIA +#define DE_MEDIA_FIRST 0 +#define DE_MEDIA_LAST (DE_MAX_MEDIA - 1) +#define DE_AUI_BNC (SUPPORTED_AUI | SUPPORTED_BNC) + +#define DE_TIMER_LINK (60 * HZ) +#define DE_TIMER_NO_LINK (5 * HZ) + +#define DE_NUM_REGS 16 +#define DE_REGS_SIZE (DE_NUM_REGS * sizeof(u32)) +#define DE_REGS_VER 1 + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (6*HZ) + +/* This is a mysterious value that can be written to CSR11 in the 21040 (only) + to support a pre-NWay full-duplex signaling mechanism using short frames. + No one knows what it should be, but if left at its default value some + 10base2(!) packets trigger a full-duplex-request interrupt. */ +#define FULL_DUPLEX_MAGIC 0x6969 + +enum { + /* NIC registers */ + BusMode = 0x00, + TxPoll = 0x08, + RxPoll = 0x10, + RxRingAddr = 0x18, + TxRingAddr = 0x20, + MacStatus = 0x28, + MacMode = 0x30, + IntrMask = 0x38, + RxMissed = 0x40, + ROMCmd = 0x48, + CSR11 = 0x58, + SIAStatus = 0x60, + CSR13 = 0x68, + CSR14 = 0x70, + CSR15 = 0x78, + PCIPM = 0x40, + + /* BusMode bits */ + CmdReset = (1 << 0), + CacheAlign16 = 0x00008000, + BurstLen4 = 0x00000400, + DescSkipLen = (DSL << 2), + + /* Rx/TxPoll bits */ + NormalTxPoll = (1 << 0), + NormalRxPoll = (1 << 0), + + /* Tx/Rx descriptor status bits */ + DescOwn = (1 << 31), + RxError = (1 << 15), + RxErrLong = (1 << 7), + RxErrCRC = (1 << 1), + RxErrFIFO = (1 << 0), + RxErrRunt = (1 << 11), + RxErrFrame = (1 << 14), + RingEnd = (1 << 25), + FirstFrag = (1 << 29), + LastFrag = (1 << 30), + TxError = (1 << 15), + TxFIFOUnder = (1 << 1), + TxLinkFail = (1 << 2) | (1 << 10) | (1 << 11), + TxMaxCol = (1 << 8), + TxOWC = (1 << 9), + TxJabber = (1 << 14), + SetupFrame = (1 << 27), + TxSwInt = (1 << 31), + + /* MacStatus bits */ + IntrOK = (1 << 16), + IntrErr = (1 << 15), + RxIntr = (1 << 6), + RxEmpty = (1 << 7), + TxIntr = (1 << 0), + TxEmpty = (1 << 2), + PciErr = (1 << 13), + TxState = (1 << 22) | (1 << 21) | (1 << 20), + RxState = (1 << 19) | (1 << 18) | (1 << 17), + LinkFail = (1 << 12), + LinkPass = (1 << 4), + RxStopped = (1 << 8), + TxStopped = (1 << 1), + + /* MacMode bits */ + TxEnable = (1 << 13), + RxEnable = (1 << 1), + RxTx = TxEnable | RxEnable, + FullDuplex = (1 << 9), + AcceptAllMulticast = (1 << 7), + AcceptAllPhys = (1 << 6), + BOCnt = (1 << 5), + MacModeClear = (1<<12) | (1<<11) | (1<<10) | (1<<8) | (1<<3) | + RxTx | BOCnt | AcceptAllPhys | AcceptAllMulticast, + + /* ROMCmd bits */ + EE_SHIFT_CLK = 0x02, /* EEPROM shift clock. */ + EE_CS = 0x01, /* EEPROM chip select. */ + EE_DATA_WRITE = 0x04, /* Data from the Tulip to EEPROM. */ + EE_WRITE_0 = 0x01, + EE_WRITE_1 = 0x05, + EE_DATA_READ = 0x08, /* Data from the EEPROM chip. */ + EE_ENB = (0x4800 | EE_CS), + + /* The EEPROM commands include the alway-set leading bit. */ + EE_READ_CMD = 6, + + /* RxMissed bits */ + RxMissedOver = (1 << 16), + RxMissedMask = 0xffff, + + /* SROM-related bits */ + SROMC0InfoLeaf = 27, + MediaBlockMask = 0x3f, + MediaCustomCSRs = (1 << 6), + + /* PCIPM bits */ + PM_Sleep = (1 << 31), + PM_Snooze = (1 << 30), + PM_Mask = PM_Sleep | PM_Snooze, + + /* SIAStatus bits */ + NWayState = (1 << 14) | (1 << 13) | (1 << 12), + NWayRestart = (1 << 12), + NonselPortActive = (1 << 9), + SelPortActive = (1 << 8), + LinkFailStatus = (1 << 2), + NetCxnErr = (1 << 1), +}; + +static const u32 de_intr_mask = + IntrOK | IntrErr | RxIntr | RxEmpty | TxIntr | TxEmpty | + LinkPass | LinkFail | PciErr; + +/* + * Set the programmable burst length to 4 longwords for all: + * DMA errors result without these values. Cache align 16 long. + */ +static const u32 de_bus_mode = CacheAlign16 | BurstLen4 | DescSkipLen; + +struct de_srom_media_block { + u8 opts; + u16 csr13; + u16 csr14; + u16 csr15; +} __packed; + +struct de_srom_info_leaf { + u16 default_media; + u8 n_blocks; + u8 unused; +} __packed; + +struct de_desc { + __le32 opts1; + __le32 opts2; + __le32 addr1; + __le32 addr2; +#if DSL + __le32 skip[DSL]; +#endif +}; + +struct media_info { + u16 type; /* DE_MEDIA_xxx */ + u16 csr13; + u16 csr14; + u16 csr15; +}; + +struct ring_info { + struct sk_buff *skb; + dma_addr_t mapping; +}; + +struct de_private { + unsigned tx_head; + unsigned tx_tail; + unsigned rx_tail; + + void __iomem *regs; + struct net_device *dev; + spinlock_t lock; + + struct de_desc *rx_ring; + struct de_desc *tx_ring; + struct ring_info tx_skb[DE_TX_RING_SIZE]; + struct ring_info rx_skb[DE_RX_RING_SIZE]; + unsigned rx_buf_sz; + dma_addr_t ring_dma; + + u32 msg_enable; + + struct net_device_stats net_stats; + + struct pci_dev *pdev; + + u16 setup_frame[DE_SETUP_FRAME_WORDS]; + + u32 media_type; + u32 media_supported; + u32 media_advertise; + struct media_info media[DE_MAX_MEDIA]; + struct timer_list media_timer; + + u8 *ee_data; + unsigned board_idx; + unsigned de21040 : 1; + unsigned media_lock : 1; +}; + + +static void de_set_rx_mode (struct net_device *dev); +static void de_tx (struct de_private *de); +static void de_clean_rings (struct de_private *de); +static void de_media_interrupt (struct de_private *de, u32 status); +static void de21040_media_timer (unsigned long data); +static void de21041_media_timer (unsigned long data); +static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media); + + +static DEFINE_PCI_DEVICE_TABLE(de_pci_tbl) = { + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { }, +}; +MODULE_DEVICE_TABLE(pci, de_pci_tbl); + +static const char * const media_name[DE_MAX_MEDIA] = { + "10baseT auto", + "BNC", + "AUI", + "10baseT-HD", + "10baseT-FD" +}; + +/* 21040 transceiver register settings: + * TP AUTO(unused), BNC(unused), AUI, TP, TP FD*/ +static u16 t21040_csr13[] = { 0, 0, 0x8F09, 0x8F01, 0x8F01, }; +static u16 t21040_csr14[] = { 0, 0, 0x0705, 0xFFFF, 0xFFFD, }; +static u16 t21040_csr15[] = { 0, 0, 0x0006, 0x0000, 0x0000, }; + +/* 21041 transceiver register settings: TP AUTO, BNC, AUI, TP, TP FD*/ +static u16 t21041_csr13[] = { 0xEF01, 0xEF09, 0xEF09, 0xEF01, 0xEF09, }; +static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, }; +/* If on-chip autonegotiation is broken, use half-duplex (FF3F) instead */ +static u16 t21041_csr14_brk[] = { 0xFF3F, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, }; +static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; + + +#define dr32(reg) ioread32(de->regs + (reg)) +#define dw32(reg, val) iowrite32((val), de->regs + (reg)) + + +static void de_rx_err_acct (struct de_private *de, unsigned rx_tail, + u32 status, u32 len) +{ + netif_dbg(de, rx_err, de->dev, + "rx err, slot %d status 0x%x len %d\n", + rx_tail, status, len); + + if ((status & 0x38000300) != 0x0300) { + /* Ingore earlier buffers. */ + if ((status & 0xffff) != 0x7fff) { + netif_warn(de, rx_err, de->dev, + "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", + status); + de->net_stats.rx_length_errors++; + } + } else if (status & RxError) { + /* There was a fatal error. */ + de->net_stats.rx_errors++; /* end of a packet.*/ + if (status & 0x0890) de->net_stats.rx_length_errors++; + if (status & RxErrCRC) de->net_stats.rx_crc_errors++; + if (status & RxErrFIFO) de->net_stats.rx_fifo_errors++; + } +} + +static void de_rx (struct de_private *de) +{ + unsigned rx_tail = de->rx_tail; + unsigned rx_work = DE_RX_RING_SIZE; + unsigned drop = 0; + int rc; + + while (--rx_work) { + u32 status, len; + dma_addr_t mapping; + struct sk_buff *skb, *copy_skb; + unsigned copying_skb, buflen; + + skb = de->rx_skb[rx_tail].skb; + BUG_ON(!skb); + rmb(); + status = le32_to_cpu(de->rx_ring[rx_tail].opts1); + if (status & DescOwn) + break; + + len = ((status >> 16) & 0x7ff) - 4; + mapping = de->rx_skb[rx_tail].mapping; + + if (unlikely(drop)) { + de->net_stats.rx_dropped++; + goto rx_next; + } + + if (unlikely((status & 0x38008300) != 0x0300)) { + de_rx_err_acct(de, rx_tail, status, len); + goto rx_next; + } + + copying_skb = (len <= rx_copybreak); + + netif_dbg(de, rx_status, de->dev, + "rx slot %d status 0x%x len %d copying? %d\n", + rx_tail, status, len, copying_skb); + + buflen = copying_skb ? (len + RX_OFFSET) : de->rx_buf_sz; + copy_skb = dev_alloc_skb (buflen); + if (unlikely(!copy_skb)) { + de->net_stats.rx_dropped++; + drop = 1; + rx_work = 100; + goto rx_next; + } + + if (!copying_skb) { + pci_unmap_single(de->pdev, mapping, + buflen, PCI_DMA_FROMDEVICE); + skb_put(skb, len); + + mapping = + de->rx_skb[rx_tail].mapping = + pci_map_single(de->pdev, copy_skb->data, + buflen, PCI_DMA_FROMDEVICE); + de->rx_skb[rx_tail].skb = copy_skb; + } else { + pci_dma_sync_single_for_cpu(de->pdev, mapping, len, PCI_DMA_FROMDEVICE); + skb_reserve(copy_skb, RX_OFFSET); + skb_copy_from_linear_data(skb, skb_put(copy_skb, len), + len); + pci_dma_sync_single_for_device(de->pdev, mapping, len, PCI_DMA_FROMDEVICE); + + /* We'll reuse the original ring buffer. */ + skb = copy_skb; + } + + skb->protocol = eth_type_trans (skb, de->dev); + + de->net_stats.rx_packets++; + de->net_stats.rx_bytes += skb->len; + rc = netif_rx (skb); + if (rc == NET_RX_DROP) + drop = 1; + +rx_next: + if (rx_tail == (DE_RX_RING_SIZE - 1)) + de->rx_ring[rx_tail].opts2 = + cpu_to_le32(RingEnd | de->rx_buf_sz); + else + de->rx_ring[rx_tail].opts2 = cpu_to_le32(de->rx_buf_sz); + de->rx_ring[rx_tail].addr1 = cpu_to_le32(mapping); + wmb(); + de->rx_ring[rx_tail].opts1 = cpu_to_le32(DescOwn); + rx_tail = NEXT_RX(rx_tail); + } + + if (!rx_work) + netdev_warn(de->dev, "rx work limit reached\n"); + + de->rx_tail = rx_tail; +} + +static irqreturn_t de_interrupt (int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct de_private *de = netdev_priv(dev); + u32 status; + + status = dr32(MacStatus); + if ((!(status & (IntrOK|IntrErr))) || (status == 0xFFFF)) + return IRQ_NONE; + + netif_dbg(de, intr, dev, "intr, status %08x mode %08x desc %u/%u/%u\n", + status, dr32(MacMode), + de->rx_tail, de->tx_head, de->tx_tail); + + dw32(MacStatus, status); + + if (status & (RxIntr | RxEmpty)) { + de_rx(de); + if (status & RxEmpty) + dw32(RxPoll, NormalRxPoll); + } + + spin_lock(&de->lock); + + if (status & (TxIntr | TxEmpty)) + de_tx(de); + + if (status & (LinkPass | LinkFail)) + de_media_interrupt(de, status); + + spin_unlock(&de->lock); + + if (status & PciErr) { + u16 pci_status; + + pci_read_config_word(de->pdev, PCI_STATUS, &pci_status); + pci_write_config_word(de->pdev, PCI_STATUS, pci_status); + netdev_err(de->dev, + "PCI bus error, status=%08x, PCI status=%04x\n", + status, pci_status); + } + + return IRQ_HANDLED; +} + +static void de_tx (struct de_private *de) +{ + unsigned tx_head = de->tx_head; + unsigned tx_tail = de->tx_tail; + + while (tx_tail != tx_head) { + struct sk_buff *skb; + u32 status; + + rmb(); + status = le32_to_cpu(de->tx_ring[tx_tail].opts1); + if (status & DescOwn) + break; + + skb = de->tx_skb[tx_tail].skb; + BUG_ON(!skb); + if (unlikely(skb == DE_DUMMY_SKB)) + goto next; + + if (unlikely(skb == DE_SETUP_SKB)) { + pci_unmap_single(de->pdev, de->tx_skb[tx_tail].mapping, + sizeof(de->setup_frame), PCI_DMA_TODEVICE); + goto next; + } + + pci_unmap_single(de->pdev, de->tx_skb[tx_tail].mapping, + skb->len, PCI_DMA_TODEVICE); + + if (status & LastFrag) { + if (status & TxError) { + netif_dbg(de, tx_err, de->dev, + "tx err, status 0x%x\n", + status); + de->net_stats.tx_errors++; + if (status & TxOWC) + de->net_stats.tx_window_errors++; + if (status & TxMaxCol) + de->net_stats.tx_aborted_errors++; + if (status & TxLinkFail) + de->net_stats.tx_carrier_errors++; + if (status & TxFIFOUnder) + de->net_stats.tx_fifo_errors++; + } else { + de->net_stats.tx_packets++; + de->net_stats.tx_bytes += skb->len; + netif_dbg(de, tx_done, de->dev, + "tx done, slot %d\n", tx_tail); + } + dev_kfree_skb_irq(skb); + } + +next: + de->tx_skb[tx_tail].skb = NULL; + + tx_tail = NEXT_TX(tx_tail); + } + + de->tx_tail = tx_tail; + + if (netif_queue_stopped(de->dev) && (TX_BUFFS_AVAIL(de) > (DE_TX_RING_SIZE / 4))) + netif_wake_queue(de->dev); +} + +static netdev_tx_t de_start_xmit (struct sk_buff *skb, + struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + unsigned int entry, tx_free; + u32 mapping, len, flags = FirstFrag | LastFrag; + struct de_desc *txd; + + spin_lock_irq(&de->lock); + + tx_free = TX_BUFFS_AVAIL(de); + if (tx_free == 0) { + netif_stop_queue(dev); + spin_unlock_irq(&de->lock); + return NETDEV_TX_BUSY; + } + tx_free--; + + entry = de->tx_head; + + txd = &de->tx_ring[entry]; + + len = skb->len; + mapping = pci_map_single(de->pdev, skb->data, len, PCI_DMA_TODEVICE); + if (entry == (DE_TX_RING_SIZE - 1)) + flags |= RingEnd; + if (!tx_free || (tx_free == (DE_TX_RING_SIZE / 2))) + flags |= TxSwInt; + flags |= len; + txd->opts2 = cpu_to_le32(flags); + txd->addr1 = cpu_to_le32(mapping); + + de->tx_skb[entry].skb = skb; + de->tx_skb[entry].mapping = mapping; + wmb(); + + txd->opts1 = cpu_to_le32(DescOwn); + wmb(); + + de->tx_head = NEXT_TX(entry); + netif_dbg(de, tx_queued, dev, "tx queued, slot %d, skblen %d\n", + entry, skb->len); + + if (tx_free == 0) + netif_stop_queue(dev); + + spin_unlock_irq(&de->lock); + + /* Trigger an immediate transmit demand. */ + dw32(TxPoll, NormalTxPoll); + + return NETDEV_TX_OK; +} + +/* Set or clear the multicast filter for this adaptor. + Note that we only use exclusion around actually queueing the + new frame, not around filling de->setup_frame. This is non-deterministic + when re-entered but still correct. */ + +#undef set_bit_le +#define set_bit_le(i,p) do { ((char *)(p))[(i)/8] |= (1<<((i)%8)); } while(0) + +static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + u16 hash_table[32]; + struct netdev_hw_addr *ha; + int i; + u16 *eaddrs; + + memset(hash_table, 0, sizeof(hash_table)); + set_bit_le(255, hash_table); /* Broadcast entry */ + /* This should work on big-endian machines as well. */ + netdev_for_each_mc_addr(ha, dev) { + int index = ether_crc_le(ETH_ALEN, ha->addr) & 0x1ff; + + set_bit_le(index, hash_table); + } + + for (i = 0; i < 32; i++) { + *setup_frm++ = hash_table[i]; + *setup_frm++ = hash_table[i]; + } + setup_frm = &de->setup_frame[13*6]; + + /* Fill the final entry with our physical address. */ + eaddrs = (u16 *)dev->dev_addr; + *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; + *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; + *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; +} + +static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + struct netdev_hw_addr *ha; + u16 *eaddrs; + + /* We have <= 14 addresses so we can use the wonderful + 16 address perfect filtering of the Tulip. */ + netdev_for_each_mc_addr(ha, dev) { + eaddrs = (u16 *) ha->addr; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + } + /* Fill the unused entries with the broadcast address. */ + memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12); + setup_frm = &de->setup_frame[15*6]; + + /* Fill the final entry with our physical address. */ + eaddrs = (u16 *)dev->dev_addr; + *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; + *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; + *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; +} + + +static void __de_set_rx_mode (struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + u32 macmode; + unsigned int entry; + u32 mapping; + struct de_desc *txd; + struct de_desc *dummy_txd = NULL; + + macmode = dr32(MacMode) & ~(AcceptAllMulticast | AcceptAllPhys); + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + macmode |= AcceptAllMulticast | AcceptAllPhys; + goto out; + } + + if ((netdev_mc_count(dev) > 1000) || (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter well -- accept all multicasts. */ + macmode |= AcceptAllMulticast; + goto out; + } + + /* Note that only the low-address shortword of setup_frame is valid! + The values are doubled for big-endian architectures. */ + if (netdev_mc_count(dev) > 14) /* Must use a multicast hash table. */ + build_setup_frame_hash (de->setup_frame, dev); + else + build_setup_frame_perfect (de->setup_frame, dev); + + /* + * Now add this frame to the Tx list. + */ + + entry = de->tx_head; + + /* Avoid a chip errata by prefixing a dummy entry. */ + if (entry != 0) { + de->tx_skb[entry].skb = DE_DUMMY_SKB; + + dummy_txd = &de->tx_ring[entry]; + dummy_txd->opts2 = (entry == (DE_TX_RING_SIZE - 1)) ? + cpu_to_le32(RingEnd) : 0; + dummy_txd->addr1 = 0; + + /* Must set DescOwned later to avoid race with chip */ + + entry = NEXT_TX(entry); + } + + de->tx_skb[entry].skb = DE_SETUP_SKB; + de->tx_skb[entry].mapping = mapping = + pci_map_single (de->pdev, de->setup_frame, + sizeof (de->setup_frame), PCI_DMA_TODEVICE); + + /* Put the setup frame on the Tx list. */ + txd = &de->tx_ring[entry]; + if (entry == (DE_TX_RING_SIZE - 1)) + txd->opts2 = cpu_to_le32(SetupFrame | RingEnd | sizeof (de->setup_frame)); + else + txd->opts2 = cpu_to_le32(SetupFrame | sizeof (de->setup_frame)); + txd->addr1 = cpu_to_le32(mapping); + wmb(); + + txd->opts1 = cpu_to_le32(DescOwn); + wmb(); + + if (dummy_txd) { + dummy_txd->opts1 = cpu_to_le32(DescOwn); + wmb(); + } + + de->tx_head = NEXT_TX(entry); + + if (TX_BUFFS_AVAIL(de) == 0) + netif_stop_queue(dev); + + /* Trigger an immediate transmit demand. */ + dw32(TxPoll, NormalTxPoll); + +out: + if (macmode != dr32(MacMode)) + dw32(MacMode, macmode); +} + +static void de_set_rx_mode (struct net_device *dev) +{ + unsigned long flags; + struct de_private *de = netdev_priv(dev); + + spin_lock_irqsave (&de->lock, flags); + __de_set_rx_mode(dev); + spin_unlock_irqrestore (&de->lock, flags); +} + +static inline void de_rx_missed(struct de_private *de, u32 rx_missed) +{ + if (unlikely(rx_missed & RxMissedOver)) + de->net_stats.rx_missed_errors += RxMissedMask; + else + de->net_stats.rx_missed_errors += (rx_missed & RxMissedMask); +} + +static void __de_get_stats(struct de_private *de) +{ + u32 tmp = dr32(RxMissed); /* self-clearing */ + + de_rx_missed(de, tmp); +} + +static struct net_device_stats *de_get_stats(struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + + /* The chip only need report frame silently dropped. */ + spin_lock_irq(&de->lock); + if (netif_running(dev) && netif_device_present(dev)) + __de_get_stats(de); + spin_unlock_irq(&de->lock); + + return &de->net_stats; +} + +static inline int de_is_running (struct de_private *de) +{ + return (dr32(MacStatus) & (RxState | TxState)) ? 1 : 0; +} + +static void de_stop_rxtx (struct de_private *de) +{ + u32 macmode; + unsigned int i = 1300/100; + + macmode = dr32(MacMode); + if (macmode & RxTx) { + dw32(MacMode, macmode & ~RxTx); + dr32(MacMode); + } + + /* wait until in-flight frame completes. + * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin) + * Typically expect this loop to end in < 50 us on 100BT. + */ + while (--i) { + if (!de_is_running(de)) + return; + udelay(100); + } + + netdev_warn(de->dev, "timeout expired, stopping DMA\n"); +} + +static inline void de_start_rxtx (struct de_private *de) +{ + u32 macmode; + + macmode = dr32(MacMode); + if ((macmode & RxTx) != RxTx) { + dw32(MacMode, macmode | RxTx); + dr32(MacMode); + } +} + +static void de_stop_hw (struct de_private *de) +{ + + udelay(5); + dw32(IntrMask, 0); + + de_stop_rxtx(de); + + dw32(MacStatus, dr32(MacStatus)); + + udelay(10); + + de->rx_tail = 0; + de->tx_head = de->tx_tail = 0; +} + +static void de_link_up(struct de_private *de) +{ + if (!netif_carrier_ok(de->dev)) { + netif_carrier_on(de->dev); + netif_info(de, link, de->dev, "link up, media %s\n", + media_name[de->media_type]); + } +} + +static void de_link_down(struct de_private *de) +{ + if (netif_carrier_ok(de->dev)) { + netif_carrier_off(de->dev); + netif_info(de, link, de->dev, "link down\n"); + } +} + +static void de_set_media (struct de_private *de) +{ + unsigned media = de->media_type; + u32 macmode = dr32(MacMode); + + if (de_is_running(de)) + netdev_warn(de->dev, "chip is running while changing media!\n"); + + if (de->de21040) + dw32(CSR11, FULL_DUPLEX_MAGIC); + dw32(CSR13, 0); /* Reset phy */ + dw32(CSR14, de->media[media].csr14); + dw32(CSR15, de->media[media].csr15); + dw32(CSR13, de->media[media].csr13); + + /* must delay 10ms before writing to other registers, + * especially CSR6 + */ + mdelay(10); + + if (media == DE_MEDIA_TP_FD) + macmode |= FullDuplex; + else + macmode &= ~FullDuplex; + + netif_info(de, link, de->dev, "set link %s\n", media_name[media]); + netif_info(de, hw, de->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n", + dr32(MacMode), dr32(SIAStatus), + dr32(CSR13), dr32(CSR14), dr32(CSR15)); + netif_info(de, hw, de->dev, "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n", + macmode, de->media[media].csr13, + de->media[media].csr14, de->media[media].csr15); + if (macmode != dr32(MacMode)) + dw32(MacMode, macmode); +} + +static void de_next_media (struct de_private *de, const u32 *media, + unsigned int n_media) +{ + unsigned int i; + + for (i = 0; i < n_media; i++) { + if (de_ok_to_advertise(de, media[i])) { + de->media_type = media[i]; + return; + } + } +} + +static void de21040_media_timer (unsigned long data) +{ + struct de_private *de = (struct de_private *) data; + struct net_device *dev = de->dev; + u32 status = dr32(SIAStatus); + unsigned int carrier; + unsigned long flags; + + carrier = (status & NetCxnErr) ? 0 : 1; + + if (carrier) { + if (de->media_type != DE_MEDIA_AUI && (status & LinkFailStatus)) + goto no_link_yet; + + de->media_timer.expires = jiffies + DE_TIMER_LINK; + add_timer(&de->media_timer); + if (!netif_carrier_ok(dev)) + de_link_up(de); + else + netif_info(de, timer, dev, "%s link ok, status %x\n", + media_name[de->media_type], status); + return; + } + + de_link_down(de); + + if (de->media_lock) + return; + + if (de->media_type == DE_MEDIA_AUI) { + static const u32 next_state = DE_MEDIA_TP; + de_next_media(de, &next_state, 1); + } else { + static const u32 next_state = DE_MEDIA_AUI; + de_next_media(de, &next_state, 1); + } + + spin_lock_irqsave(&de->lock, flags); + de_stop_rxtx(de); + spin_unlock_irqrestore(&de->lock, flags); + de_set_media(de); + de_start_rxtx(de); + +no_link_yet: + de->media_timer.expires = jiffies + DE_TIMER_NO_LINK; + add_timer(&de->media_timer); + + netif_info(de, timer, dev, "no link, trying media %s, status %x\n", + media_name[de->media_type], status); +} + +static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media) +{ + switch (new_media) { + case DE_MEDIA_TP_AUTO: + if (!(de->media_advertise & ADVERTISED_Autoneg)) + return 0; + if (!(de->media_advertise & (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full))) + return 0; + break; + case DE_MEDIA_BNC: + if (!(de->media_advertise & ADVERTISED_BNC)) + return 0; + break; + case DE_MEDIA_AUI: + if (!(de->media_advertise & ADVERTISED_AUI)) + return 0; + break; + case DE_MEDIA_TP: + if (!(de->media_advertise & ADVERTISED_10baseT_Half)) + return 0; + break; + case DE_MEDIA_TP_FD: + if (!(de->media_advertise & ADVERTISED_10baseT_Full)) + return 0; + break; + } + + return 1; +} + +static void de21041_media_timer (unsigned long data) +{ + struct de_private *de = (struct de_private *) data; + struct net_device *dev = de->dev; + u32 status = dr32(SIAStatus); + unsigned int carrier; + unsigned long flags; + + /* clear port active bits */ + dw32(SIAStatus, NonselPortActive | SelPortActive); + + carrier = (status & NetCxnErr) ? 0 : 1; + + if (carrier) { + if ((de->media_type == DE_MEDIA_TP_AUTO || + de->media_type == DE_MEDIA_TP || + de->media_type == DE_MEDIA_TP_FD) && + (status & LinkFailStatus)) + goto no_link_yet; + + de->media_timer.expires = jiffies + DE_TIMER_LINK; + add_timer(&de->media_timer); + if (!netif_carrier_ok(dev)) + de_link_up(de); + else + netif_info(de, timer, dev, + "%s link ok, mode %x status %x\n", + media_name[de->media_type], + dr32(MacMode), status); + return; + } + + de_link_down(de); + + /* if media type locked, don't switch media */ + if (de->media_lock) + goto set_media; + + /* if activity detected, use that as hint for new media type */ + if (status & NonselPortActive) { + unsigned int have_media = 1; + + /* if AUI/BNC selected, then activity is on TP port */ + if (de->media_type == DE_MEDIA_AUI || + de->media_type == DE_MEDIA_BNC) { + if (de_ok_to_advertise(de, DE_MEDIA_TP_AUTO)) + de->media_type = DE_MEDIA_TP_AUTO; + else + have_media = 0; + } + + /* TP selected. If there is only TP and BNC, then it's BNC */ + else if (((de->media_supported & DE_AUI_BNC) == SUPPORTED_BNC) && + de_ok_to_advertise(de, DE_MEDIA_BNC)) + de->media_type = DE_MEDIA_BNC; + + /* TP selected. If there is only TP and AUI, then it's AUI */ + else if (((de->media_supported & DE_AUI_BNC) == SUPPORTED_AUI) && + de_ok_to_advertise(de, DE_MEDIA_AUI)) + de->media_type = DE_MEDIA_AUI; + + /* otherwise, ignore the hint */ + else + have_media = 0; + + if (have_media) + goto set_media; + } + + /* + * Absent or ambiguous activity hint, move to next advertised + * media state. If de->media_type is left unchanged, this + * simply resets the PHY and reloads the current media settings. + */ + if (de->media_type == DE_MEDIA_AUI) { + static const u32 next_states[] = { + DE_MEDIA_BNC, DE_MEDIA_TP_AUTO + }; + de_next_media(de, next_states, ARRAY_SIZE(next_states)); + } else if (de->media_type == DE_MEDIA_BNC) { + static const u32 next_states[] = { + DE_MEDIA_TP_AUTO, DE_MEDIA_AUI + }; + de_next_media(de, next_states, ARRAY_SIZE(next_states)); + } else { + static const u32 next_states[] = { + DE_MEDIA_AUI, DE_MEDIA_BNC, DE_MEDIA_TP_AUTO + }; + de_next_media(de, next_states, ARRAY_SIZE(next_states)); + } + +set_media: + spin_lock_irqsave(&de->lock, flags); + de_stop_rxtx(de); + spin_unlock_irqrestore(&de->lock, flags); + de_set_media(de); + de_start_rxtx(de); + +no_link_yet: + de->media_timer.expires = jiffies + DE_TIMER_NO_LINK; + add_timer(&de->media_timer); + + netif_info(de, timer, dev, "no link, trying media %s, status %x\n", + media_name[de->media_type], status); +} + +static void de_media_interrupt (struct de_private *de, u32 status) +{ + if (status & LinkPass) { + /* Ignore if current media is AUI or BNC and we can't use TP */ + if ((de->media_type == DE_MEDIA_AUI || + de->media_type == DE_MEDIA_BNC) && + (de->media_lock || + !de_ok_to_advertise(de, DE_MEDIA_TP_AUTO))) + return; + /* If current media is not TP, change it to TP */ + if ((de->media_type == DE_MEDIA_AUI || + de->media_type == DE_MEDIA_BNC)) { + de->media_type = DE_MEDIA_TP_AUTO; + de_stop_rxtx(de); + de_set_media(de); + de_start_rxtx(de); + } + de_link_up(de); + mod_timer(&de->media_timer, jiffies + DE_TIMER_LINK); + return; + } + + BUG_ON(!(status & LinkFail)); + /* Mark the link as down only if current media is TP */ + if (netif_carrier_ok(de->dev) && de->media_type != DE_MEDIA_AUI && + de->media_type != DE_MEDIA_BNC) { + de_link_down(de); + mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); + } +} + +static int de_reset_mac (struct de_private *de) +{ + u32 status, tmp; + + /* + * Reset MAC. de4x5.c and tulip.c examined for "advice" + * in this area. + */ + + if (dr32(BusMode) == 0xffffffff) + return -EBUSY; + + /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */ + dw32 (BusMode, CmdReset); + mdelay (1); + + dw32 (BusMode, de_bus_mode); + mdelay (1); + + for (tmp = 0; tmp < 5; tmp++) { + dr32 (BusMode); + mdelay (1); + } + + mdelay (1); + + status = dr32(MacStatus); + if (status & (RxState | TxState)) + return -EBUSY; + if (status == 0xffffffff) + return -ENODEV; + return 0; +} + +static void de_adapter_wake (struct de_private *de) +{ + u32 pmctl; + + if (de->de21040) + return; + + pci_read_config_dword(de->pdev, PCIPM, &pmctl); + if (pmctl & PM_Mask) { + pmctl &= ~PM_Mask; + pci_write_config_dword(de->pdev, PCIPM, pmctl); + + /* de4x5.c delays, so we do too */ + msleep(10); + } +} + +static void de_adapter_sleep (struct de_private *de) +{ + u32 pmctl; + + if (de->de21040) + return; + + dw32(CSR13, 0); /* Reset phy */ + pci_read_config_dword(de->pdev, PCIPM, &pmctl); + pmctl |= PM_Sleep; + pci_write_config_dword(de->pdev, PCIPM, pmctl); +} + +static int de_init_hw (struct de_private *de) +{ + struct net_device *dev = de->dev; + u32 macmode; + int rc; + + de_adapter_wake(de); + + macmode = dr32(MacMode) & ~MacModeClear; + + rc = de_reset_mac(de); + if (rc) + return rc; + + de_set_media(de); /* reset phy */ + + dw32(RxRingAddr, de->ring_dma); + dw32(TxRingAddr, de->ring_dma + (sizeof(struct de_desc) * DE_RX_RING_SIZE)); + + dw32(MacMode, RxTx | macmode); + + dr32(RxMissed); /* self-clearing */ + + dw32(IntrMask, de_intr_mask); + + de_set_rx_mode(dev); + + return 0; +} + +static int de_refill_rx (struct de_private *de) +{ + unsigned i; + + for (i = 0; i < DE_RX_RING_SIZE; i++) { + struct sk_buff *skb; + + skb = dev_alloc_skb(de->rx_buf_sz); + if (!skb) + goto err_out; + + skb->dev = de->dev; + + de->rx_skb[i].mapping = pci_map_single(de->pdev, + skb->data, de->rx_buf_sz, PCI_DMA_FROMDEVICE); + de->rx_skb[i].skb = skb; + + de->rx_ring[i].opts1 = cpu_to_le32(DescOwn); + if (i == (DE_RX_RING_SIZE - 1)) + de->rx_ring[i].opts2 = + cpu_to_le32(RingEnd | de->rx_buf_sz); + else + de->rx_ring[i].opts2 = cpu_to_le32(de->rx_buf_sz); + de->rx_ring[i].addr1 = cpu_to_le32(de->rx_skb[i].mapping); + de->rx_ring[i].addr2 = 0; + } + + return 0; + +err_out: + de_clean_rings(de); + return -ENOMEM; +} + +static int de_init_rings (struct de_private *de) +{ + memset(de->tx_ring, 0, sizeof(struct de_desc) * DE_TX_RING_SIZE); + de->tx_ring[DE_TX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd); + + de->rx_tail = 0; + de->tx_head = de->tx_tail = 0; + + return de_refill_rx (de); +} + +static int de_alloc_rings (struct de_private *de) +{ + de->rx_ring = pci_alloc_consistent(de->pdev, DE_RING_BYTES, &de->ring_dma); + if (!de->rx_ring) + return -ENOMEM; + de->tx_ring = &de->rx_ring[DE_RX_RING_SIZE]; + return de_init_rings(de); +} + +static void de_clean_rings (struct de_private *de) +{ + unsigned i; + + memset(de->rx_ring, 0, sizeof(struct de_desc) * DE_RX_RING_SIZE); + de->rx_ring[DE_RX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd); + wmb(); + memset(de->tx_ring, 0, sizeof(struct de_desc) * DE_TX_RING_SIZE); + de->tx_ring[DE_TX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd); + wmb(); + + for (i = 0; i < DE_RX_RING_SIZE; i++) { + if (de->rx_skb[i].skb) { + pci_unmap_single(de->pdev, de->rx_skb[i].mapping, + de->rx_buf_sz, PCI_DMA_FROMDEVICE); + dev_kfree_skb(de->rx_skb[i].skb); + } + } + + for (i = 0; i < DE_TX_RING_SIZE; i++) { + struct sk_buff *skb = de->tx_skb[i].skb; + if ((skb) && (skb != DE_DUMMY_SKB)) { + if (skb != DE_SETUP_SKB) { + de->net_stats.tx_dropped++; + pci_unmap_single(de->pdev, + de->tx_skb[i].mapping, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb(skb); + } else { + pci_unmap_single(de->pdev, + de->tx_skb[i].mapping, + sizeof(de->setup_frame), + PCI_DMA_TODEVICE); + } + } + } + + memset(&de->rx_skb, 0, sizeof(struct ring_info) * DE_RX_RING_SIZE); + memset(&de->tx_skb, 0, sizeof(struct ring_info) * DE_TX_RING_SIZE); +} + +static void de_free_rings (struct de_private *de) +{ + de_clean_rings(de); + pci_free_consistent(de->pdev, DE_RING_BYTES, de->rx_ring, de->ring_dma); + de->rx_ring = NULL; + de->tx_ring = NULL; +} + +static int de_open (struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + int rc; + + netif_dbg(de, ifup, dev, "enabling interface\n"); + + de->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); + + rc = de_alloc_rings(de); + if (rc) { + netdev_err(dev, "ring allocation failure, err=%d\n", rc); + return rc; + } + + dw32(IntrMask, 0); + + rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev); + if (rc) { + netdev_err(dev, "IRQ %d request failure, err=%d\n", + dev->irq, rc); + goto err_out_free; + } + + rc = de_init_hw(de); + if (rc) { + netdev_err(dev, "h/w init failure, err=%d\n", rc); + goto err_out_free_irq; + } + + netif_start_queue(dev); + mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); + + return 0; + +err_out_free_irq: + free_irq(dev->irq, dev); +err_out_free: + de_free_rings(de); + return rc; +} + +static int de_close (struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + unsigned long flags; + + netif_dbg(de, ifdown, dev, "disabling interface\n"); + + del_timer_sync(&de->media_timer); + + spin_lock_irqsave(&de->lock, flags); + de_stop_hw(de); + netif_stop_queue(dev); + netif_carrier_off(dev); + spin_unlock_irqrestore(&de->lock, flags); + + free_irq(dev->irq, dev); + + de_free_rings(de); + de_adapter_sleep(de); + return 0; +} + +static void de_tx_timeout (struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + + netdev_dbg(dev, "NIC status %08x mode %08x sia %08x desc %u/%u/%u\n", + dr32(MacStatus), dr32(MacMode), dr32(SIAStatus), + de->rx_tail, de->tx_head, de->tx_tail); + + del_timer_sync(&de->media_timer); + + disable_irq(dev->irq); + spin_lock_irq(&de->lock); + + de_stop_hw(de); + netif_stop_queue(dev); + netif_carrier_off(dev); + + spin_unlock_irq(&de->lock); + enable_irq(dev->irq); + + /* Update the error counts. */ + __de_get_stats(de); + + synchronize_irq(dev->irq); + de_clean_rings(de); + + de_init_rings(de); + + de_init_hw(de); + + netif_wake_queue(dev); +} + +static void __de_get_regs(struct de_private *de, u8 *buf) +{ + int i; + u32 *rbuf = (u32 *)buf; + + /* read all CSRs */ + for (i = 0; i < DE_NUM_REGS; i++) + rbuf[i] = dr32(i * 8); + + /* handle self-clearing RxMissed counter, CSR8 */ + de_rx_missed(de, rbuf[8]); +} + +static int __de_get_settings(struct de_private *de, struct ethtool_cmd *ecmd) +{ + ecmd->supported = de->media_supported; + ecmd->transceiver = XCVR_INTERNAL; + ecmd->phy_address = 0; + ecmd->advertising = de->media_advertise; + + switch (de->media_type) { + case DE_MEDIA_AUI: + ecmd->port = PORT_AUI; + break; + case DE_MEDIA_BNC: + ecmd->port = PORT_BNC; + break; + default: + ecmd->port = PORT_TP; + break; + } + + ethtool_cmd_speed_set(ecmd, 10); + + if (dr32(MacMode) & FullDuplex) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + + if (de->media_lock) + ecmd->autoneg = AUTONEG_DISABLE; + else + ecmd->autoneg = AUTONEG_ENABLE; + + /* ignore maxtxpkt, maxrxpkt for now */ + + return 0; +} + +static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd) +{ + u32 new_media; + unsigned int media_lock; + + if (ethtool_cmd_speed(ecmd) != 10) + return -EINVAL; + if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) + return -EINVAL; + if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI && ecmd->port != PORT_BNC) + return -EINVAL; + if (de->de21040 && ecmd->port == PORT_BNC) + return -EINVAL; + if (ecmd->transceiver != XCVR_INTERNAL) + return -EINVAL; + if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE) + return -EINVAL; + if (ecmd->advertising & ~de->media_supported) + return -EINVAL; + if (ecmd->autoneg == AUTONEG_ENABLE && + (!(ecmd->advertising & ADVERTISED_Autoneg))) + return -EINVAL; + + switch (ecmd->port) { + case PORT_AUI: + new_media = DE_MEDIA_AUI; + if (!(ecmd->advertising & ADVERTISED_AUI)) + return -EINVAL; + break; + case PORT_BNC: + new_media = DE_MEDIA_BNC; + if (!(ecmd->advertising & ADVERTISED_BNC)) + return -EINVAL; + break; + default: + if (ecmd->autoneg == AUTONEG_ENABLE) + new_media = DE_MEDIA_TP_AUTO; + else if (ecmd->duplex == DUPLEX_FULL) + new_media = DE_MEDIA_TP_FD; + else + new_media = DE_MEDIA_TP; + if (!(ecmd->advertising & ADVERTISED_TP)) + return -EINVAL; + if (!(ecmd->advertising & (ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half))) + return -EINVAL; + break; + } + + media_lock = (ecmd->autoneg == AUTONEG_ENABLE) ? 0 : 1; + + if ((new_media == de->media_type) && + (media_lock == de->media_lock) && + (ecmd->advertising == de->media_advertise)) + return 0; /* nothing to change */ + + de_link_down(de); + mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); + de_stop_rxtx(de); + + de->media_type = new_media; + de->media_lock = media_lock; + de->media_advertise = ecmd->advertising; + de_set_media(de); + if (netif_running(de->dev)) + de_start_rxtx(de); + + return 0; +} + +static void de_get_drvinfo (struct net_device *dev,struct ethtool_drvinfo *info) +{ + struct de_private *de = netdev_priv(dev); + + strcpy (info->driver, DRV_NAME); + strcpy (info->version, DRV_VERSION); + strcpy (info->bus_info, pci_name(de->pdev)); + info->eedump_len = DE_EEPROM_SIZE; +} + +static int de_get_regs_len(struct net_device *dev) +{ + return DE_REGS_SIZE; +} + +static int de_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct de_private *de = netdev_priv(dev); + int rc; + + spin_lock_irq(&de->lock); + rc = __de_get_settings(de, ecmd); + spin_unlock_irq(&de->lock); + + return rc; +} + +static int de_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct de_private *de = netdev_priv(dev); + int rc; + + spin_lock_irq(&de->lock); + rc = __de_set_settings(de, ecmd); + spin_unlock_irq(&de->lock); + + return rc; +} + +static u32 de_get_msglevel(struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + + return de->msg_enable; +} + +static void de_set_msglevel(struct net_device *dev, u32 msglvl) +{ + struct de_private *de = netdev_priv(dev); + + de->msg_enable = msglvl; +} + +static int de_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct de_private *de = netdev_priv(dev); + + if (!de->ee_data) + return -EOPNOTSUPP; + if ((eeprom->offset != 0) || (eeprom->magic != 0) || + (eeprom->len != DE_EEPROM_SIZE)) + return -EINVAL; + memcpy(data, de->ee_data, eeprom->len); + + return 0; +} + +static int de_nway_reset(struct net_device *dev) +{ + struct de_private *de = netdev_priv(dev); + u32 status; + + if (de->media_type != DE_MEDIA_TP_AUTO) + return -EINVAL; + if (netif_carrier_ok(de->dev)) + de_link_down(de); + + status = dr32(SIAStatus); + dw32(SIAStatus, (status & ~NWayState) | NWayRestart); + netif_info(de, link, dev, "link nway restart, status %x,%x\n", + status, dr32(SIAStatus)); + return 0; +} + +static void de_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *data) +{ + struct de_private *de = netdev_priv(dev); + + regs->version = (DE_REGS_VER << 2) | de->de21040; + + spin_lock_irq(&de->lock); + __de_get_regs(de, data); + spin_unlock_irq(&de->lock); +} + +static const struct ethtool_ops de_ethtool_ops = { + .get_link = ethtool_op_get_link, + .get_drvinfo = de_get_drvinfo, + .get_regs_len = de_get_regs_len, + .get_settings = de_get_settings, + .set_settings = de_set_settings, + .get_msglevel = de_get_msglevel, + .set_msglevel = de_set_msglevel, + .get_eeprom = de_get_eeprom, + .nway_reset = de_nway_reset, + .get_regs = de_get_regs, +}; + +static void __devinit de21040_get_mac_address (struct de_private *de) +{ + unsigned i; + + dw32 (ROMCmd, 0); /* Reset the pointer with a dummy write. */ + udelay(5); + + for (i = 0; i < 6; i++) { + int value, boguscnt = 100000; + do { + value = dr32(ROMCmd); + rmb(); + } while (value < 0 && --boguscnt > 0); + de->dev->dev_addr[i] = value; + udelay(1); + if (boguscnt <= 0) + pr_warn("timeout reading 21040 MAC address byte %u\n", + i); + } +} + +static void __devinit de21040_get_media_info(struct de_private *de) +{ + unsigned int i; + + de->media_type = DE_MEDIA_TP; + de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Full | + SUPPORTED_10baseT_Half | SUPPORTED_AUI; + de->media_advertise = de->media_supported; + + for (i = 0; i < DE_MAX_MEDIA; i++) { + switch (i) { + case DE_MEDIA_AUI: + case DE_MEDIA_TP: + case DE_MEDIA_TP_FD: + de->media[i].type = i; + de->media[i].csr13 = t21040_csr13[i]; + de->media[i].csr14 = t21040_csr14[i]; + de->media[i].csr15 = t21040_csr15[i]; + break; + default: + de->media[i].type = DE_MEDIA_INVALID; + break; + } + } +} + +/* Note: this routine returns extra data bits for size detection. */ +static unsigned __devinit tulip_read_eeprom(void __iomem *regs, int location, int addr_len) +{ + int i; + unsigned retval = 0; + void __iomem *ee_addr = regs + ROMCmd; + int read_cmd = location | (EE_READ_CMD << addr_len); + + writel(EE_ENB & ~EE_CS, ee_addr); + writel(EE_ENB, ee_addr); + + /* Shift the read command bits out. */ + for (i = 4 + addr_len; i >= 0; i--) { + short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + writel(EE_ENB | dataval, ee_addr); + readl(ee_addr); + writel(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); + readl(ee_addr); + retval = (retval << 1) | ((readl(ee_addr) & EE_DATA_READ) ? 1 : 0); + } + writel(EE_ENB, ee_addr); + readl(ee_addr); + + for (i = 16; i > 0; i--) { + writel(EE_ENB | EE_SHIFT_CLK, ee_addr); + readl(ee_addr); + retval = (retval << 1) | ((readl(ee_addr) & EE_DATA_READ) ? 1 : 0); + writel(EE_ENB, ee_addr); + readl(ee_addr); + } + + /* Terminate the EEPROM access. */ + writel(EE_ENB & ~EE_CS, ee_addr); + return retval; +} + +static void __devinit de21041_get_srom_info (struct de_private *de) +{ + unsigned i, sa_offset = 0, ofs; + u8 ee_data[DE_EEPROM_SIZE + 6] = {}; + unsigned ee_addr_size = tulip_read_eeprom(de->regs, 0xff, 8) & 0x40000 ? 8 : 6; + struct de_srom_info_leaf *il; + void *bufp; + + /* download entire eeprom */ + for (i = 0; i < DE_EEPROM_WORDS; i++) + ((__le16 *)ee_data)[i] = + cpu_to_le16(tulip_read_eeprom(de->regs, i, ee_addr_size)); + + /* DEC now has a specification but early board makers + just put the address in the first EEPROM locations. */ + /* This does memcmp(eedata, eedata+16, 8) */ + +#ifndef CONFIG_MIPS_COBALT + + for (i = 0; i < 8; i ++) + if (ee_data[i] != ee_data[16+i]) + sa_offset = 20; + +#endif + + /* store MAC address */ + for (i = 0; i < 6; i ++) + de->dev->dev_addr[i] = ee_data[i + sa_offset]; + + /* get offset of controller 0 info leaf. ignore 2nd byte. */ + ofs = ee_data[SROMC0InfoLeaf]; + if (ofs >= (sizeof(ee_data) - sizeof(struct de_srom_info_leaf) - sizeof(struct de_srom_media_block))) + goto bad_srom; + + /* get pointer to info leaf */ + il = (struct de_srom_info_leaf *) &ee_data[ofs]; + + /* paranoia checks */ + if (il->n_blocks == 0) + goto bad_srom; + if ((sizeof(ee_data) - ofs) < + (sizeof(struct de_srom_info_leaf) + (sizeof(struct de_srom_media_block) * il->n_blocks))) + goto bad_srom; + + /* get default media type */ + switch (get_unaligned(&il->default_media)) { + case 0x0001: de->media_type = DE_MEDIA_BNC; break; + case 0x0002: de->media_type = DE_MEDIA_AUI; break; + case 0x0204: de->media_type = DE_MEDIA_TP_FD; break; + default: de->media_type = DE_MEDIA_TP_AUTO; break; + } + + if (netif_msg_probe(de)) + pr_info("de%d: SROM leaf offset %u, default media %s\n", + de->board_idx, ofs, media_name[de->media_type]); + + /* init SIA register values to defaults */ + for (i = 0; i < DE_MAX_MEDIA; i++) { + de->media[i].type = DE_MEDIA_INVALID; + de->media[i].csr13 = 0xffff; + de->media[i].csr14 = 0xffff; + de->media[i].csr15 = 0xffff; + } + + /* parse media blocks to see what medias are supported, + * and if any custom CSR values are provided + */ + bufp = ((void *)il) + sizeof(*il); + for (i = 0; i < il->n_blocks; i++) { + struct de_srom_media_block *ib = bufp; + unsigned idx; + + /* index based on media type in media block */ + switch(ib->opts & MediaBlockMask) { + case 0: /* 10baseT */ + de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half + | SUPPORTED_Autoneg; + idx = DE_MEDIA_TP; + de->media[DE_MEDIA_TP_AUTO].type = DE_MEDIA_TP_AUTO; + break; + case 1: /* BNC */ + de->media_supported |= SUPPORTED_BNC; + idx = DE_MEDIA_BNC; + break; + case 2: /* AUI */ + de->media_supported |= SUPPORTED_AUI; + idx = DE_MEDIA_AUI; + break; + case 4: /* 10baseT-FD */ + de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Full + | SUPPORTED_Autoneg; + idx = DE_MEDIA_TP_FD; + de->media[DE_MEDIA_TP_AUTO].type = DE_MEDIA_TP_AUTO; + break; + default: + goto bad_srom; + } + + de->media[idx].type = idx; + + if (netif_msg_probe(de)) + pr_info("de%d: media block #%u: %s", + de->board_idx, i, + media_name[de->media[idx].type]); + + bufp += sizeof (ib->opts); + + if (ib->opts & MediaCustomCSRs) { + de->media[idx].csr13 = get_unaligned(&ib->csr13); + de->media[idx].csr14 = get_unaligned(&ib->csr14); + de->media[idx].csr15 = get_unaligned(&ib->csr15); + bufp += sizeof(ib->csr13) + sizeof(ib->csr14) + + sizeof(ib->csr15); + + if (netif_msg_probe(de)) + pr_cont(" (%x,%x,%x)\n", + de->media[idx].csr13, + de->media[idx].csr14, + de->media[idx].csr15); + + } else { + if (netif_msg_probe(de)) + pr_cont("\n"); + } + + if (bufp > ((void *)&ee_data[DE_EEPROM_SIZE - 3])) + break; + } + + de->media_advertise = de->media_supported; + +fill_defaults: + /* fill in defaults, for cases where custom CSRs not used */ + for (i = 0; i < DE_MAX_MEDIA; i++) { + if (de->media[i].csr13 == 0xffff) + de->media[i].csr13 = t21041_csr13[i]; + if (de->media[i].csr14 == 0xffff) { + /* autonegotiation is broken at least on some chip + revisions - rev. 0x21 works, 0x11 does not */ + if (de->pdev->revision < 0x20) + de->media[i].csr14 = t21041_csr14_brk[i]; + else + de->media[i].csr14 = t21041_csr14[i]; + } + if (de->media[i].csr15 == 0xffff) + de->media[i].csr15 = t21041_csr15[i]; + } + + de->ee_data = kmemdup(&ee_data[0], DE_EEPROM_SIZE, GFP_KERNEL); + + return; + +bad_srom: + /* for error cases, it's ok to assume we support all these */ + for (i = 0; i < DE_MAX_MEDIA; i++) + de->media[i].type = i; + de->media_supported = + SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP | + SUPPORTED_AUI | + SUPPORTED_BNC; + goto fill_defaults; +} + +static const struct net_device_ops de_netdev_ops = { + .ndo_open = de_open, + .ndo_stop = de_close, + .ndo_set_multicast_list = de_set_rx_mode, + .ndo_start_xmit = de_start_xmit, + .ndo_get_stats = de_get_stats, + .ndo_tx_timeout = de_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int __devinit de_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + struct de_private *de; + int rc; + void __iomem *regs; + unsigned long pciaddr; + static int board_idx = -1; + + board_idx++; + +#ifndef MODULE + if (board_idx == 0) + pr_info("%s\n", version); +#endif + + /* allocate a new ethernet device structure, and fill in defaults */ + dev = alloc_etherdev(sizeof(struct de_private)); + if (!dev) + return -ENOMEM; + + dev->netdev_ops = &de_netdev_ops; + SET_NETDEV_DEV(dev, &pdev->dev); + dev->ethtool_ops = &de_ethtool_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + de = netdev_priv(dev); + de->de21040 = ent->driver_data == 0 ? 1 : 0; + de->pdev = pdev; + de->dev = dev; + de->msg_enable = (debug < 0 ? DE_DEF_MSG_ENABLE : debug); + de->board_idx = board_idx; + spin_lock_init (&de->lock); + init_timer(&de->media_timer); + if (de->de21040) + de->media_timer.function = de21040_media_timer; + else + de->media_timer.function = de21041_media_timer; + de->media_timer.data = (unsigned long) de; + + netif_carrier_off(dev); + + /* wake up device, assign resources */ + rc = pci_enable_device(pdev); + if (rc) + goto err_out_free; + + /* reserve PCI resources to ensure driver atomicity */ + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out_disable; + + /* check for invalid IRQ value */ + if (pdev->irq < 2) { + rc = -EIO; + pr_err("invalid irq (%d) for pci dev %s\n", + pdev->irq, pci_name(pdev)); + goto err_out_res; + } + + dev->irq = pdev->irq; + + /* obtain and check validity of PCI I/O address */ + pciaddr = pci_resource_start(pdev, 1); + if (!pciaddr) { + rc = -EIO; + pr_err("no MMIO resource for pci dev %s\n", pci_name(pdev)); + goto err_out_res; + } + if (pci_resource_len(pdev, 1) < DE_REGS_SIZE) { + rc = -EIO; + pr_err("MMIO resource (%llx) too small on pci dev %s\n", + (unsigned long long)pci_resource_len(pdev, 1), + pci_name(pdev)); + goto err_out_res; + } + + /* remap CSR registers */ + regs = ioremap_nocache(pciaddr, DE_REGS_SIZE); + if (!regs) { + rc = -EIO; + pr_err("Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n", + (unsigned long long)pci_resource_len(pdev, 1), + pciaddr, pci_name(pdev)); + goto err_out_res; + } + dev->base_addr = (unsigned long) regs; + de->regs = regs; + + de_adapter_wake(de); + + /* make sure hardware is not running */ + rc = de_reset_mac(de); + if (rc) { + pr_err("Cannot reset MAC, pci dev %s\n", pci_name(pdev)); + goto err_out_iomap; + } + + /* get MAC address, initialize default media type and + * get list of supported media + */ + if (de->de21040) { + de21040_get_mac_address(de); + de21040_get_media_info(de); + } else { + de21041_get_srom_info(de); + } + + /* register new network interface with kernel */ + rc = register_netdev(dev); + if (rc) + goto err_out_iomap; + + /* print info about board and interface just registered */ + netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n", + de->de21040 ? "21040" : "21041", + dev->base_addr, + dev->dev_addr, + dev->irq); + + pci_set_drvdata(pdev, dev); + + /* enable busmastering */ + pci_set_master(pdev); + + /* put adapter to sleep */ + de_adapter_sleep(de); + + return 0; + +err_out_iomap: + kfree(de->ee_data); + iounmap(regs); +err_out_res: + pci_release_regions(pdev); +err_out_disable: + pci_disable_device(pdev); +err_out_free: + free_netdev(dev); + return rc; +} + +static void __devexit de_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct de_private *de = netdev_priv(dev); + + BUG_ON(!dev); + unregister_netdev(dev); + kfree(de->ee_data); + iounmap(de->regs); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + free_netdev(dev); +} + +#ifdef CONFIG_PM + +static int de_suspend (struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct de_private *de = netdev_priv(dev); + + rtnl_lock(); + if (netif_running (dev)) { + del_timer_sync(&de->media_timer); + + disable_irq(dev->irq); + spin_lock_irq(&de->lock); + + de_stop_hw(de); + netif_stop_queue(dev); + netif_device_detach(dev); + netif_carrier_off(dev); + + spin_unlock_irq(&de->lock); + enable_irq(dev->irq); + + /* Update the error counts. */ + __de_get_stats(de); + + synchronize_irq(dev->irq); + de_clean_rings(de); + + de_adapter_sleep(de); + pci_disable_device(pdev); + } else { + netif_device_detach(dev); + } + rtnl_unlock(); + return 0; +} + +static int de_resume (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct de_private *de = netdev_priv(dev); + int retval = 0; + + rtnl_lock(); + if (netif_device_present(dev)) + goto out; + if (!netif_running(dev)) + goto out_attach; + if ((retval = pci_enable_device(pdev))) { + netdev_err(dev, "pci_enable_device failed in resume\n"); + goto out; + } + pci_set_master(pdev); + de_init_rings(de); + de_init_hw(de); +out_attach: + netif_device_attach(dev); +out: + rtnl_unlock(); + return 0; +} + +#endif /* CONFIG_PM */ + +static struct pci_driver de_driver = { + .name = DRV_NAME, + .id_table = de_pci_tbl, + .probe = de_init_one, + .remove = __devexit_p(de_remove_one), +#ifdef CONFIG_PM + .suspend = de_suspend, + .resume = de_resume, +#endif +}; + +static int __init de_init (void) +{ +#ifdef MODULE + pr_info("%s\n", version); +#endif + return pci_register_driver(&de_driver); +} + +static void __exit de_exit (void) +{ + pci_unregister_driver (&de_driver); +} + +module_init(de_init); +module_exit(de_exit); diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c new file mode 100644 index 00000000000..959b41021a6 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/de4x5.c @@ -0,0 +1,5599 @@ +/* de4x5.c: A DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500 + ethernet driver for Linux. + + Copyright 1994, 1995 Digital Equipment Corporation. + + Testing resources for this driver have been made available + in part by NASA Ames Research Center (mjacob@nas.nasa.gov). + + The author may be reached at davies@maniac.ultranet.com. + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the + Free Software Foundation; either version 2 of the License, or (at your + option) any later version. + + THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 675 Mass Ave, Cambridge, MA 02139, USA. + + Originally, this driver was written for the Digital Equipment + Corporation series of EtherWORKS ethernet cards: + + DE425 TP/COAX EISA + DE434 TP PCI + DE435 TP/COAX/AUI PCI + DE450 TP/COAX/AUI PCI + DE500 10/100 PCI Fasternet + + but it will now attempt to support all cards which conform to the + Digital Semiconductor SROM Specification. The driver currently + recognises the following chips: + + DC21040 (no SROM) + DC21041[A] + DC21140[A] + DC21142 + DC21143 + + So far the driver is known to work with the following cards: + + KINGSTON + Linksys + ZNYX342 + SMC8432 + SMC9332 (w/new SROM) + ZNYX31[45] + ZNYX346 10/100 4 port (can act as a 10/100 bridge!) + + The driver has been tested on a relatively busy network using the DE425, + DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred + 16M of data to a DECstation 5000/200 as follows: + + TCP UDP + TX RX TX RX + DE425 1030k 997k 1170k 1128k + DE434 1063k 995k 1170k 1125k + DE435 1063k 995k 1170k 1125k + DE500 1063k 998k 1170k 1125k in 10Mb/s mode + + All values are typical (in kBytes/sec) from a sample of 4 for each + measurement. Their error is +/-20k on a quiet (private) network and also + depend on what load the CPU has. + + ========================================================================= + This driver has been written substantially from scratch, although its + inheritance of style and stack interface from 'ewrk3.c' and in turn from + Donald Becker's 'lance.c' should be obvious. With the module autoload of + every usable DECchip board, I pinched Donald's 'next_module' field to + link my modules together. + + Up to 15 EISA cards can be supported under this driver, limited primarily + by the available IRQ lines. I have checked different configurations of + multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a + problem yet (provided you have at least depca.c v0.38) ... + + PCI support has been added to allow the driver to work with the DE434, + DE435, DE450 and DE500 cards. The I/O accesses are a bit of a kludge due + to the differences in the EISA and PCI CSR address offsets from the base + address. + + The ability to load this driver as a loadable module has been included + and used extensively during the driver development (to save those long + reboot sequences). Loadable module support under PCI and EISA has been + achieved by letting the driver autoprobe as if it were compiled into the + kernel. Do make sure you're not sharing interrupts with anything that + cannot accommodate interrupt sharing! + + To utilise this ability, you have to do 8 things: + + 0) have a copy of the loadable modules code installed on your system. + 1) copy de4x5.c from the /linux/drivers/net directory to your favourite + temporary directory. + 2) for fixed autoprobes (not recommended), edit the source code near + line 5594 to reflect the I/O address you're using, or assign these when + loading by: + + insmod de4x5 io=0xghh where g = bus number + hh = device number + + NB: autoprobing for modules is now supported by default. You may just + use: + + insmod de4x5 + + to load all available boards. For a specific board, still use + the 'io=?' above. + 3) compile de4x5.c, but include -DMODULE in the command line to ensure + that the correct bits are compiled (see end of source code). + 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a + kernel with the de4x5 configuration turned off and reboot. + 5) insmod de4x5 [io=0xghh] + 6) run the net startup bits for your new eth?? interface(s) manually + (usually /etc/rc.inet[12] at boot time). + 7) enjoy! + + To unload a module, turn off the associated interface(s) + 'ifconfig eth?? down' then 'rmmod de4x5'. + + Automedia detection is included so that in principal you can disconnect + from, e.g. TP, reconnect to BNC and things will still work (after a + pause whilst the driver figures out where its media went). My tests + using ping showed that it appears to work.... + + By default, the driver will now autodetect any DECchip based card. + Should you have a need to restrict the driver to DIGITAL only cards, you + can compile with a DEC_ONLY define, or if loading as a module, use the + 'dec_only=1' parameter. + + I've changed the timing routines to use the kernel timer and scheduling + functions so that the hangs and other assorted problems that occurred + while autosensing the media should be gone. A bonus for the DC21040 + auto media sense algorithm is that it can now use one that is more in + line with the rest (the DC21040 chip doesn't have a hardware timer). + The downside is the 1 'jiffies' (10ms) resolution. + + IEEE 802.3u MII interface code has been added in anticipation that some + products may use it in the future. + + The SMC9332 card has a non-compliant SROM which needs fixing - I have + patched this driver to detect it because the SROM format used complies + to a previous DEC-STD format. + + I have removed the buffer copies needed for receive on Intels. I cannot + remove them for Alphas since the Tulip hardware only does longword + aligned DMA transfers and the Alphas get alignment traps with non + longword aligned data copies (which makes them really slow). No comment. + + I have added SROM decoding routines to make this driver work with any + card that supports the Digital Semiconductor SROM spec. This will help + all cards running the dc2114x series chips in particular. Cards using + the dc2104x chips should run correctly with the basic driver. I'm in + debt to <mjacob@feral.com> for the testing and feedback that helped get + this feature working. So far we have tested KINGSTON, SMC8432, SMC9332 + (with the latest SROM complying with the SROM spec V3: their first was + broken), ZNYX342 and LinkSys. ZYNX314 (dual 21041 MAC) and ZNYX 315 + (quad 21041 MAC) cards also appear to work despite their incorrectly + wired IRQs. + + I have added a temporary fix for interrupt problems when some SCSI cards + share the same interrupt as the DECchip based cards. The problem occurs + because the SCSI card wants to grab the interrupt as a fast interrupt + (runs the service routine with interrupts turned off) vs. this card + which really needs to run the service routine with interrupts turned on. + This driver will now add the interrupt service routine as a fast + interrupt if it is bounced from the slow interrupt. THIS IS NOT A + RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time + until people sort out their compatibility issues and the kernel + interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST + INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not + run on the same interrupt. PCMCIA/CardBus is another can of worms... + + Finally, I think I have really fixed the module loading problem with + more than one DECchip based card. As a side effect, I don't mess with + the device structure any more which means that if more than 1 card in + 2.0.x is installed (4 in 2.1.x), the user will have to edit + linux/drivers/net/Space.c to make room for them. Hence, module loading + is the preferred way to use this driver, since it doesn't have this + limitation. + + Where SROM media detection is used and full duplex is specified in the + SROM, the feature is ignored unless lp->params.fdx is set at compile + time OR during a module load (insmod de4x5 args='eth??:fdx' [see + below]). This is because there is no way to automatically detect full + duplex links except through autonegotiation. When I include the + autonegotiation feature in the SROM autoconf code, this detection will + occur automatically for that case. + + Command line arguments are now allowed, similar to passing arguments + through LILO. This will allow a per adapter board set up of full duplex + and media. The only lexical constraints are: the board name (dev->name) + appears in the list before its parameters. The list of parameters ends + either at the end of the parameter list or with another board name. The + following parameters are allowed: + + fdx for full duplex + autosense to set the media/speed; with the following + sub-parameters: + TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO + + Case sensitivity is important for the sub-parameters. They *must* be + upper case. Examples: + + insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'. + + For a compiled in driver, at or above line 548, place e.g. + #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP" + + Yes, I know full duplex isn't permissible on BNC or AUI; they're just + examples. By default, full duplex is turned off and AUTO is the default + autosense setting. In reality, I expect only the full duplex option to + be used. Note the use of single quotes in the two examples above and the + lack of commas to separate items. ALSO, you must get the requested media + correct in relation to what the adapter SROM says it has. There's no way + to determine this in advance other than by trial and error and common + sense, e.g. call a BNC connectored port 'BNC', not '10Mb'. + + Changed the bus probing. EISA used to be done first, followed by PCI. + Most people probably don't even know what a de425 is today and the EISA + probe has messed up some SCSI cards in the past, so now PCI is always + probed first followed by EISA if a) the architecture allows EISA and + either b) there have been no PCI cards detected or c) an EISA probe is + forced by the user. To force a probe include "force_eisa" in your + insmod "args" line; for built-in kernels either change the driver to do + this automatically or include #define DE4X5_FORCE_EISA on or before + line 1040 in the driver. + + TO DO: + ------ + + Revision History + ---------------- + + Version Date Description + + 0.1 17-Nov-94 Initial writing. ALPHA code release. + 0.2 13-Jan-95 Added PCI support for DE435's. + 0.21 19-Jan-95 Added auto media detection. + 0.22 10-Feb-95 Fix interrupt handler call <chris@cosy.sbg.ac.at>. + Fix recognition bug reported by <bkm@star.rl.ac.uk>. + Add request/release_region code. + Add loadable modules support for PCI. + Clean up loadable modules support. + 0.23 28-Feb-95 Added DC21041 and DC21140 support. + Fix missed frame counter value and initialisation. + Fixed EISA probe. + 0.24 11-Apr-95 Change delay routine to use <linux/udelay>. + Change TX_BUFFS_AVAIL macro. + Change media autodetection to allow manual setting. + Completed DE500 (DC21140) support. + 0.241 18-Apr-95 Interim release without DE500 Autosense Algorithm. + 0.242 10-May-95 Minor changes. + 0.30 12-Jun-95 Timer fix for DC21140. + Portability changes. + Add ALPHA changes from <jestabro@ant.tay1.dec.com>. + Add DE500 semi automatic autosense. + Add Link Fail interrupt TP failure detection. + Add timer based link change detection. + Plugged a memory leak in de4x5_queue_pkt(). + 0.31 13-Jun-95 Fixed PCI stuff for 1.3.1. + 0.32 26-Jun-95 Added verify_area() calls in de4x5_ioctl() from a + suggestion by <heiko@colossus.escape.de>. + 0.33 8-Aug-95 Add shared interrupt support (not released yet). + 0.331 21-Aug-95 Fix de4x5_open() with fast CPUs. + Fix de4x5_interrupt(). + Fix dc21140_autoconf() mess. + No shared interrupt support. + 0.332 11-Sep-95 Added MII management interface routines. + 0.40 5-Mar-96 Fix setup frame timeout <maartenb@hpkuipc.cern.ch>. + Add kernel timer code (h/w is too flaky). + Add MII based PHY autosense. + Add new multicasting code. + Add new autosense algorithms for media/mode + selection using kernel scheduling/timing. + Re-formatted. + Made changes suggested by <jeff@router.patch.net>: + Change driver to detect all DECchip based cards + with DEC_ONLY restriction a special case. + Changed driver to autoprobe as a module. No irq + checking is done now - assume BIOS is good! + Added SMC9332 detection <manabe@Roy.dsl.tutics.ac.jp> + 0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card + only <niles@axp745gsfc.nasa.gov> + Fix for multiple PCI cards reported by <jos@xos.nl> + Duh, put the IRQF_SHARED flag into request_interrupt(). + Fix SMC ethernet address in enet_det[]. + Print chip name instead of "UNKNOWN" during boot. + 0.42 26-Apr-96 Fix MII write TA bit error. + Fix bug in dc21040 and dc21041 autosense code. + Remove buffer copies on receive for Intels. + Change sk_buff handling during media disconnects to + eliminate DUP packets. + Add dynamic TX thresholding. + Change all chips to use perfect multicast filtering. + Fix alloc_device() bug <jari@markkus2.fimr.fi> + 0.43 21-Jun-96 Fix unconnected media TX retry bug. + Add Accton to the list of broken cards. + Fix TX under-run bug for non DC21140 chips. + Fix boot command probe bug in alloc_device() as + reported by <koen.gadeyne@barco.com> and + <orava@nether.tky.hut.fi>. + Add cache locks to prevent a race condition as + reported by <csd@microplex.com> and + <baba@beckman.uiuc.edu>. + Upgraded alloc_device() code. + 0.431 28-Jun-96 Fix potential bug in queue_pkt() from discussion + with <csd@microplex.com> + 0.44 13-Aug-96 Fix RX overflow bug in 2114[023] chips. + Fix EISA probe bugs reported by <os2@kpi.kharkov.ua> + and <michael@compurex.com>. + 0.441 9-Sep-96 Change dc21041_autoconf() to probe quiet BNC media + with a loopback packet. + 0.442 9-Sep-96 Include AUI in dc21041 media printout. Bug reported + by <bhat@mundook.cs.mu.OZ.AU> + 0.45 8-Dec-96 Include endian functions for PPC use, from work + by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>. + 0.451 28-Dec-96 Added fix to allow autoprobe for modules after + suggestion from <mjacob@feral.com>. + 0.5 30-Jan-97 Added SROM decoding functions. + Updated debug flags. + Fix sleep/wakeup calls for PCI cards, bug reported + by <cross@gweep.lkg.dec.com>. + Added multi-MAC, one SROM feature from discussion + with <mjacob@feral.com>. + Added full module autoprobe capability. + Added attempt to use an SMC9332 with broken SROM. + Added fix for ZYNX multi-mac cards that didn't + get their IRQs wired correctly. + 0.51 13-Feb-97 Added endian fixes for the SROM accesses from + <paubert@iram.es> + Fix init_connection() to remove extra device reset. + Fix MAC/PHY reset ordering in dc21140m_autoconf(). + Fix initialisation problem with lp->timeout in + typeX_infoblock() from <paubert@iram.es>. + Fix MII PHY reset problem from work done by + <paubert@iram.es>. + 0.52 26-Apr-97 Some changes may not credit the right people - + a disk crash meant I lost some mail. + Change RX interrupt routine to drop rather than + defer packets to avoid hang reported by + <g.thomas@opengroup.org>. + Fix srom_exec() to return for COMPACT and type 1 + infoblocks. + Added DC21142 and DC21143 functions. + Added byte counters from <phil@tazenda.demon.co.uk> + Added IRQF_DISABLED temporary fix from + <mjacob@feral.com>. + 0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during + module load: bug reported by + <Piete.Brooks@cl.cam.ac.uk> + Fix multi-MAC, one SROM, to work with 2114x chips: + bug reported by <cmetz@inner.net>. + Make above search independent of BIOS device scan + direction. + Completed DC2114[23] autosense functions. + 0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by + <robin@intercore.com + Fix type1_infoblock() bug introduced in 0.53, from + problem reports by + <parmee@postecss.ncrfran.france.ncr.com> and + <jo@ice.dillingen.baynet.de>. + Added argument list to set up each board from either + a module's command line or a compiled in #define. + Added generic MII PHY functionality to deal with + newer PHY chips. + Fix the mess in 2.1.67. + 0.532 5-Jan-98 Fix bug in mii_get_phy() reported by + <redhat@cococo.net>. + Fix bug in pci_probe() for 64 bit systems reported + by <belliott@accessone.com>. + 0.533 9-Jan-98 Fix more 64 bit bugs reported by <jal@cs.brown.edu>. + 0.534 24-Jan-98 Fix last (?) endian bug from <geert@linux-m68k.org> + 0.535 21-Feb-98 Fix Ethernet Address PROM reset bug for DC21040. + 0.536 21-Mar-98 Change pci_probe() to use the pci_dev structure. + **Incompatible with 2.0.x from here.** + 0.540 5-Jul-98 Atomicize assertion of dev->interrupt for SMP + from <lma@varesearch.com> + Add TP, AUI and BNC cases to 21140m_autoconf() for + case where a 21140 under SROM control uses, e.g. AUI + from problem report by <delchini@lpnp09.in2p3.fr> + Add MII parallel detection to 2114x_autoconf() for + case where no autonegotiation partner exists from + problem report by <mlapsley@ndirect.co.uk>. + Add ability to force connection type directly even + when using SROM control from problem report by + <earl@exis.net>. + Updated the PCI interface to conform with the latest + version. I hope nothing is broken... + Add TX done interrupt modification from suggestion + by <Austin.Donnelly@cl.cam.ac.uk>. + Fix is_anc_capable() bug reported by + <Austin.Donnelly@cl.cam.ac.uk>. + Fix type[13]_infoblock() bug: during MII search, PHY + lp->rst not run because lp->ibn not initialised - + from report & fix by <paubert@iram.es>. + Fix probe bug with EISA & PCI cards present from + report by <eirik@netcom.com>. + 0.541 24-Aug-98 Fix compiler problems associated with i386-string + ops from multiple bug reports and temporary fix + from <paubert@iram.es>. + Fix pci_probe() to correctly emulate the old + pcibios_find_class() function. + Add an_exception() for old ZYNX346 and fix compile + warning on PPC & SPARC, from <ecd@skynet.be>. + Fix lastPCI to correctly work with compiled in + kernels and modules from bug report by + <Zlatko.Calusic@CARNet.hr> et al. + 0.542 15-Sep-98 Fix dc2114x_autoconf() to stop multiple messages + when media is unconnected. + Change dev->interrupt to lp->interrupt to ensure + alignment for Alpha's and avoid their unaligned + access traps. This flag is merely for log messages: + should do something more definitive though... + 0.543 30-Dec-98 Add SMP spin locking. + 0.544 8-May-99 Fix for buggy SROM in Motorola embedded boards using + a 21143 by <mmporter@home.com>. + Change PCI/EISA bus probing order. + 0.545 28-Nov-99 Further Moto SROM bug fix from + <mporter@eng.mcd.mot.com> + Remove double checking for DEBUG_RX in de4x5_dbg_rx() + from report by <geert@linux-m68k.org> + 0.546 22-Feb-01 Fixes Alpha XP1000 oops. The srom_search function + was causing a page fault when initializing the + variable 'pb', on a non de4x5 PCI device, in this + case a PCI bridge (DEC chip 21152). The value of + 'pb' is now only initialized if a de4x5 chip is + present. + <france@handhelds.org> + 0.547 08-Nov-01 Use library crc32 functions by <Matt_Domsch@dell.com> + 0.548 30-Aug-03 Big 2.6 cleanup. Ported to PCI/EISA probing and + generic DMA APIs. Fixed DE425 support on Alpha. + <maz@wild-wind.fr.eu.org> + ========================================================================= +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/eisa.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/crc32.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/time.h> +#include <linux/types.h> +#include <linux/unistd.h> +#include <linux/ctype.h> +#include <linux/dma-mapping.h> +#include <linux/moduleparam.h> +#include <linux/bitops.h> +#include <linux/gfp.h> + +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <asm/uaccess.h> +#ifdef CONFIG_PPC_PMAC +#include <asm/machdep.h> +#endif /* CONFIG_PPC_PMAC */ + +#include "de4x5.h" + +static const char version[] __devinitconst = + KERN_INFO "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n"; + +#define c_char const char + +/* +** MII Information +*/ +struct phy_table { + int reset; /* Hard reset required? */ + int id; /* IEEE OUI */ + int ta; /* One cycle TA time - 802.3u is confusing here */ + struct { /* Non autonegotiation (parallel) speed det. */ + int reg; + int mask; + int value; + } spd; +}; + +struct mii_phy { + int reset; /* Hard reset required? */ + int id; /* IEEE OUI */ + int ta; /* One cycle TA time */ + struct { /* Non autonegotiation (parallel) speed det. */ + int reg; + int mask; + int value; + } spd; + int addr; /* MII address for the PHY */ + u_char *gep; /* Start of GEP sequence block in SROM */ + u_char *rst; /* Start of reset sequence in SROM */ + u_int mc; /* Media Capabilities */ + u_int ana; /* NWay Advertisement */ + u_int fdx; /* Full DupleX capabilities for each media */ + u_int ttm; /* Transmit Threshold Mode for each media */ + u_int mci; /* 21142 MII Connector Interrupt info */ +}; + +#define DE4X5_MAX_PHY 8 /* Allow up to 8 attached PHY devices per board */ + +struct sia_phy { + u_char mc; /* Media Code */ + u_char ext; /* csr13-15 valid when set */ + int csr13; /* SIA Connectivity Register */ + int csr14; /* SIA TX/RX Register */ + int csr15; /* SIA General Register */ + int gepc; /* SIA GEP Control Information */ + int gep; /* SIA GEP Data */ +}; + +/* +** Define the know universe of PHY devices that can be +** recognised by this driver. +*/ +static struct phy_table phy_info[] = { + {0, NATIONAL_TX, 1, {0x19, 0x40, 0x00}}, /* National TX */ + {1, BROADCOM_T4, 1, {0x10, 0x02, 0x02}}, /* Broadcom T4 */ + {0, SEEQ_T4 , 1, {0x12, 0x10, 0x10}}, /* SEEQ T4 */ + {0, CYPRESS_T4 , 1, {0x05, 0x20, 0x20}}, /* Cypress T4 */ + {0, 0x7810 , 1, {0x14, 0x0800, 0x0800}} /* Level One LTX970 */ +}; + +/* +** These GENERIC values assumes that the PHY devices follow 802.3u and +** allow parallel detection to set the link partner ability register. +** Detection of 100Base-TX [H/F Duplex] and 100Base-T4 is supported. +*/ +#define GENERIC_REG 0x05 /* Autoneg. Link Partner Advertisement Reg. */ +#define GENERIC_MASK MII_ANLPA_100M /* All 100Mb/s Technologies */ +#define GENERIC_VALUE MII_ANLPA_100M /* 100B-TX, 100B-TX FDX, 100B-T4 */ + +/* +** Define special SROM detection cases +*/ +static c_char enet_det[][ETH_ALEN] = { + {0x00, 0x00, 0xc0, 0x00, 0x00, 0x00}, + {0x00, 0x00, 0xe8, 0x00, 0x00, 0x00} +}; + +#define SMC 1 +#define ACCTON 2 + +/* +** SROM Repair definitions. If a broken SROM is detected a card may +** use this information to help figure out what to do. This is a +** "stab in the dark" and so far for SMC9332's only. +*/ +static c_char srom_repair_info[][100] = { + {0x00,0x1e,0x00,0x00,0x00,0x08, /* SMC9332 */ + 0x1f,0x01,0x8f,0x01,0x00,0x01,0x00,0x02, + 0x01,0x00,0x00,0x78,0xe0,0x01,0x00,0x50, + 0x00,0x18,} +}; + + +#ifdef DE4X5_DEBUG +static int de4x5_debug = DE4X5_DEBUG; +#else +/*static int de4x5_debug = (DEBUG_MII | DEBUG_SROM | DEBUG_PCICFG | DEBUG_MEDIA | DEBUG_VERSION);*/ +static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION); +#endif + +/* +** Allow per adapter set up. For modules this is simply a command line +** parameter, e.g.: +** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'. +** +** For a compiled in driver, place e.g. +** #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP" +** here +*/ +#ifdef DE4X5_PARM +static char *args = DE4X5_PARM; +#else +static char *args; +#endif + +struct parameters { + bool fdx; + int autosense; +}; + +#define DE4X5_AUTOSENSE_MS 250 /* msec autosense tick (DE500) */ + +#define DE4X5_NDA 0xffe0 /* No Device (I/O) Address */ + +/* +** Ethernet PROM defines +*/ +#define PROBE_LENGTH 32 +#define ETH_PROM_SIG 0xAA5500FFUL + +/* +** Ethernet Info +*/ +#define PKT_BUF_SZ 1536 /* Buffer size for each Tx/Rx buffer */ +#define IEEE802_3_SZ 1518 /* Packet + CRC */ +#define MAX_PKT_SZ 1514 /* Maximum ethernet packet length */ +#define MAX_DAT_SZ 1500 /* Maximum ethernet data length */ +#define MIN_DAT_SZ 1 /* Minimum ethernet data length */ +#define PKT_HDR_LEN 14 /* Addresses and data length info */ +#define FAKE_FRAME_LEN (MAX_PKT_SZ + 1) +#define QUEUE_PKT_TIMEOUT (3*HZ) /* 3 second timeout */ + + +/* +** EISA bus defines +*/ +#define DE4X5_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ +#define DE4X5_EISA_TOTAL_SIZE 0x100 /* I/O address extent */ + +#define EISA_ALLOWED_IRQ_LIST {5, 9, 10, 11} + +#define DE4X5_SIGNATURE {"DE425","DE434","DE435","DE450","DE500"} +#define DE4X5_NAME_LENGTH 8 + +static c_char *de4x5_signatures[] = DE4X5_SIGNATURE; + +/* +** Ethernet PROM defines for DC21040 +*/ +#define PROBE_LENGTH 32 +#define ETH_PROM_SIG 0xAA5500FFUL + +/* +** PCI Bus defines +*/ +#define PCI_MAX_BUS_NUM 8 +#define DE4X5_PCI_TOTAL_SIZE 0x80 /* I/O address extent */ +#define DE4X5_CLASS_CODE 0x00020000 /* Network controller, Ethernet */ + +/* +** Memory Alignment. Each descriptor is 4 longwords long. To force a +** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and +** DESC_ALIGN. ALIGN aligns the start address of the private memory area +** and hence the RX descriptor ring's first entry. +*/ +#define DE4X5_ALIGN4 ((u_long)4 - 1) /* 1 longword align */ +#define DE4X5_ALIGN8 ((u_long)8 - 1) /* 2 longword align */ +#define DE4X5_ALIGN16 ((u_long)16 - 1) /* 4 longword align */ +#define DE4X5_ALIGN32 ((u_long)32 - 1) /* 8 longword align */ +#define DE4X5_ALIGN64 ((u_long)64 - 1) /* 16 longword align */ +#define DE4X5_ALIGN128 ((u_long)128 - 1) /* 32 longword align */ + +#define DE4X5_ALIGN DE4X5_ALIGN32 /* Keep the DC21040 happy... */ +#define DE4X5_CACHE_ALIGN CAL_16LONG +#define DESC_SKIP_LEN DSL_0 /* Must agree with DESC_ALIGN */ +/*#define DESC_ALIGN u32 dummy[4]; / * Must agree with DESC_SKIP_LEN */ +#define DESC_ALIGN + +#ifndef DEC_ONLY /* See README.de4x5 for using this */ +static int dec_only; +#else +static int dec_only = 1; +#endif + +/* +** DE4X5 IRQ ENABLE/DISABLE +*/ +#define ENABLE_IRQs { \ + imr |= lp->irq_en;\ + outl(imr, DE4X5_IMR); /* Enable the IRQs */\ +} + +#define DISABLE_IRQs {\ + imr = inl(DE4X5_IMR);\ + imr &= ~lp->irq_en;\ + outl(imr, DE4X5_IMR); /* Disable the IRQs */\ +} + +#define UNMASK_IRQs {\ + imr |= lp->irq_mask;\ + outl(imr, DE4X5_IMR); /* Unmask the IRQs */\ +} + +#define MASK_IRQs {\ + imr = inl(DE4X5_IMR);\ + imr &= ~lp->irq_mask;\ + outl(imr, DE4X5_IMR); /* Mask the IRQs */\ +} + +/* +** DE4X5 START/STOP +*/ +#define START_DE4X5 {\ + omr = inl(DE4X5_OMR);\ + omr |= OMR_ST | OMR_SR;\ + outl(omr, DE4X5_OMR); /* Enable the TX and/or RX */\ +} + +#define STOP_DE4X5 {\ + omr = inl(DE4X5_OMR);\ + omr &= ~(OMR_ST|OMR_SR);\ + outl(omr, DE4X5_OMR); /* Disable the TX and/or RX */ \ +} + +/* +** DE4X5 SIA RESET +*/ +#define RESET_SIA outl(0, DE4X5_SICR); /* Reset SIA connectivity regs */ + +/* +** DE500 AUTOSENSE TIMER INTERVAL (MILLISECS) +*/ +#define DE4X5_AUTOSENSE_MS 250 + +/* +** SROM Structure +*/ +struct de4x5_srom { + char sub_vendor_id[2]; + char sub_system_id[2]; + char reserved[12]; + char id_block_crc; + char reserved2; + char version; + char num_controllers; + char ieee_addr[6]; + char info[100]; + short chksum; +}; +#define SUB_VENDOR_ID 0x500a + +/* +** DE4X5 Descriptors. Make sure that all the RX buffers are contiguous +** and have sizes of both a power of 2 and a multiple of 4. +** A size of 256 bytes for each buffer could be chosen because over 90% of +** all packets in our network are <256 bytes long and 64 longword alignment +** is possible. 1536 showed better 'ttcp' performance. Take your pick. 32 TX +** descriptors are needed for machines with an ALPHA CPU. +*/ +#define NUM_RX_DESC 8 /* Number of RX descriptors */ +#define NUM_TX_DESC 32 /* Number of TX descriptors */ +#define RX_BUFF_SZ 1536 /* Power of 2 for kmalloc and */ + /* Multiple of 4 for DC21040 */ + /* Allows 512 byte alignment */ +struct de4x5_desc { + volatile __le32 status; + __le32 des1; + __le32 buf; + __le32 next; + DESC_ALIGN +}; + +/* +** The DE4X5 private structure +*/ +#define DE4X5_PKT_STAT_SZ 16 +#define DE4X5_PKT_BIN_SZ 128 /* Should be >=100 unless you + increase DE4X5_PKT_STAT_SZ */ + +struct pkt_stats { + u_int bins[DE4X5_PKT_STAT_SZ]; /* Private stats counters */ + u_int unicast; + u_int multicast; + u_int broadcast; + u_int excessive_collisions; + u_int tx_underruns; + u_int excessive_underruns; + u_int rx_runt_frames; + u_int rx_collision; + u_int rx_dribble; + u_int rx_overflow; +}; + +struct de4x5_private { + char adapter_name[80]; /* Adapter name */ + u_long interrupt; /* Aligned ISR flag */ + struct de4x5_desc *rx_ring; /* RX descriptor ring */ + struct de4x5_desc *tx_ring; /* TX descriptor ring */ + struct sk_buff *tx_skb[NUM_TX_DESC]; /* TX skb for freeing when sent */ + struct sk_buff *rx_skb[NUM_RX_DESC]; /* RX skb's */ + int rx_new, rx_old; /* RX descriptor ring pointers */ + int tx_new, tx_old; /* TX descriptor ring pointers */ + char setup_frame[SETUP_FRAME_LEN]; /* Holds MCA and PA info. */ + char frame[64]; /* Min sized packet for loopback*/ + spinlock_t lock; /* Adapter specific spinlock */ + struct net_device_stats stats; /* Public stats */ + struct pkt_stats pktStats; /* Private stats counters */ + char rxRingSize; + char txRingSize; + int bus; /* EISA or PCI */ + int bus_num; /* PCI Bus number */ + int device; /* Device number on PCI bus */ + int state; /* Adapter OPENED or CLOSED */ + int chipset; /* DC21040, DC21041 or DC21140 */ + s32 irq_mask; /* Interrupt Mask (Enable) bits */ + s32 irq_en; /* Summary interrupt bits */ + int media; /* Media (eg TP), mode (eg 100B)*/ + int c_media; /* Remember the last media conn */ + bool fdx; /* media full duplex flag */ + int linkOK; /* Link is OK */ + int autosense; /* Allow/disallow autosensing */ + bool tx_enable; /* Enable descriptor polling */ + int setup_f; /* Setup frame filtering type */ + int local_state; /* State within a 'media' state */ + struct mii_phy phy[DE4X5_MAX_PHY]; /* List of attached PHY devices */ + struct sia_phy sia; /* SIA PHY Information */ + int active; /* Index to active PHY device */ + int mii_cnt; /* Number of attached PHY's */ + int timeout; /* Scheduling counter */ + struct timer_list timer; /* Timer info for kernel */ + int tmp; /* Temporary global per card */ + struct { + u_long lock; /* Lock the cache accesses */ + s32 csr0; /* Saved Bus Mode Register */ + s32 csr6; /* Saved Operating Mode Reg. */ + s32 csr7; /* Saved IRQ Mask Register */ + s32 gep; /* Saved General Purpose Reg. */ + s32 gepc; /* Control info for GEP */ + s32 csr13; /* Saved SIA Connectivity Reg. */ + s32 csr14; /* Saved SIA TX/RX Register */ + s32 csr15; /* Saved SIA General Register */ + int save_cnt; /* Flag if state already saved */ + struct sk_buff_head queue; /* Save the (re-ordered) skb's */ + } cache; + struct de4x5_srom srom; /* A copy of the SROM */ + int cfrv; /* Card CFRV copy */ + int rx_ovf; /* Check for 'RX overflow' tag */ + bool useSROM; /* For non-DEC card use SROM */ + bool useMII; /* Infoblock using the MII */ + int asBitValid; /* Autosense bits in GEP? */ + int asPolarity; /* 0 => asserted high */ + int asBit; /* Autosense bit number in GEP */ + int defMedium; /* SROM default medium */ + int tcount; /* Last infoblock number */ + int infoblock_init; /* Initialised this infoblock? */ + int infoleaf_offset; /* SROM infoleaf for controller */ + s32 infoblock_csr6; /* csr6 value in SROM infoblock */ + int infoblock_media; /* infoblock media */ + int (*infoleaf_fn)(struct net_device *); /* Pointer to infoleaf function */ + u_char *rst; /* Pointer to Type 5 reset info */ + u_char ibn; /* Infoblock number */ + struct parameters params; /* Command line/ #defined params */ + struct device *gendev; /* Generic device */ + dma_addr_t dma_rings; /* DMA handle for rings */ + int dma_size; /* Size of the DMA area */ + char *rx_bufs; /* rx bufs on alpha, sparc, ... */ +}; + +/* +** To get around certain poxy cards that don't provide an SROM +** for the second and more DECchip, I have to key off the first +** chip's address. I'll assume there's not a bad SROM iff: +** +** o the chipset is the same +** o the bus number is the same and > 0 +** o the sum of all the returned hw address bytes is 0 or 0x5fa +** +** Also have to save the irq for those cards whose hardware designers +** can't follow the PCI to PCI Bridge Architecture spec. +*/ +static struct { + int chipset; + int bus; + int irq; + u_char addr[ETH_ALEN]; +} last = {0,}; + +/* +** The transmit ring full condition is described by the tx_old and tx_new +** pointers by: +** tx_old = tx_new Empty ring +** tx_old = tx_new+1 Full ring +** tx_old+txRingSize = tx_new+1 Full ring (wrapped condition) +*/ +#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\ + lp->tx_old+lp->txRingSize-lp->tx_new-1:\ + lp->tx_old -lp->tx_new-1) + +#define TX_PKT_PENDING (lp->tx_old != lp->tx_new) + +/* +** Public Functions +*/ +static int de4x5_open(struct net_device *dev); +static netdev_tx_t de4x5_queue_pkt(struct sk_buff *skb, + struct net_device *dev); +static irqreturn_t de4x5_interrupt(int irq, void *dev_id); +static int de4x5_close(struct net_device *dev); +static struct net_device_stats *de4x5_get_stats(struct net_device *dev); +static void de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len); +static void set_multicast_list(struct net_device *dev); +static int de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); + +/* +** Private functions +*/ +static int de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev); +static int de4x5_init(struct net_device *dev); +static int de4x5_sw_reset(struct net_device *dev); +static int de4x5_rx(struct net_device *dev); +static int de4x5_tx(struct net_device *dev); +static void de4x5_ast(struct net_device *dev); +static int de4x5_txur(struct net_device *dev); +static int de4x5_rx_ovfc(struct net_device *dev); + +static int autoconf_media(struct net_device *dev); +static void create_packet(struct net_device *dev, char *frame, int len); +static void load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb); +static int dc21040_autoconf(struct net_device *dev); +static int dc21041_autoconf(struct net_device *dev); +static int dc21140m_autoconf(struct net_device *dev); +static int dc2114x_autoconf(struct net_device *dev); +static int srom_autoconf(struct net_device *dev); +static int de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, int (*fn)(struct net_device *, int), int (*asfn)(struct net_device *)); +static int dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, int next_state, int suspect_state, int (*fn)(struct net_device *, int)); +static int test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec); +static int test_for_100Mb(struct net_device *dev, int msec); +static int wait_for_link(struct net_device *dev); +static int test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec); +static int is_spd_100(struct net_device *dev); +static int is_100_up(struct net_device *dev); +static int is_10_up(struct net_device *dev); +static int is_anc_capable(struct net_device *dev); +static int ping_media(struct net_device *dev, int msec); +static struct sk_buff *de4x5_alloc_rx_buff(struct net_device *dev, int index, int len); +static void de4x5_free_rx_buffs(struct net_device *dev); +static void de4x5_free_tx_buffs(struct net_device *dev); +static void de4x5_save_skbs(struct net_device *dev); +static void de4x5_rst_desc_ring(struct net_device *dev); +static void de4x5_cache_state(struct net_device *dev, int flag); +static void de4x5_put_cache(struct net_device *dev, struct sk_buff *skb); +static void de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb); +static struct sk_buff *de4x5_get_cache(struct net_device *dev); +static void de4x5_setup_intr(struct net_device *dev); +static void de4x5_init_connection(struct net_device *dev); +static int de4x5_reset_phy(struct net_device *dev); +static void reset_init_sia(struct net_device *dev, s32 sicr, s32 strr, s32 sigr); +static int test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec); +static int test_tp(struct net_device *dev, s32 msec); +static int EISA_signature(char *name, struct device *device); +static int PCI_signature(char *name, struct de4x5_private *lp); +static void DevicePresent(struct net_device *dev, u_long iobase); +static void enet_addr_rst(u_long aprom_addr); +static int de4x5_bad_srom(struct de4x5_private *lp); +static short srom_rd(u_long address, u_char offset); +static void srom_latch(u_int command, u_long address); +static void srom_command(u_int command, u_long address); +static void srom_address(u_int command, u_long address, u_char offset); +static short srom_data(u_int command, u_long address); +/*static void srom_busy(u_int command, u_long address);*/ +static void sendto_srom(u_int command, u_long addr); +static int getfrom_srom(u_long addr); +static int srom_map_media(struct net_device *dev); +static int srom_infoleaf_info(struct net_device *dev); +static void srom_init(struct net_device *dev); +static void srom_exec(struct net_device *dev, u_char *p); +static int mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr); +static void mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr); +static int mii_rdata(u_long ioaddr); +static void mii_wdata(int data, int len, u_long ioaddr); +static void mii_ta(u_long rw, u_long ioaddr); +static int mii_swap(int data, int len); +static void mii_address(u_char addr, u_long ioaddr); +static void sendto_mii(u32 command, int data, u_long ioaddr); +static int getfrom_mii(u32 command, u_long ioaddr); +static int mii_get_oui(u_char phyaddr, u_long ioaddr); +static int mii_get_phy(struct net_device *dev); +static void SetMulticastFilter(struct net_device *dev); +static int get_hw_addr(struct net_device *dev); +static void srom_repair(struct net_device *dev, int card); +static int test_bad_enet(struct net_device *dev, int status); +static int an_exception(struct de4x5_private *lp); +static char *build_setup_frame(struct net_device *dev, int mode); +static void disable_ast(struct net_device *dev); +static long de4x5_switch_mac_port(struct net_device *dev); +static int gep_rd(struct net_device *dev); +static void gep_wr(s32 data, struct net_device *dev); +static void yawn(struct net_device *dev, int state); +static void de4x5_parse_params(struct net_device *dev); +static void de4x5_dbg_open(struct net_device *dev); +static void de4x5_dbg_mii(struct net_device *dev, int k); +static void de4x5_dbg_media(struct net_device *dev); +static void de4x5_dbg_srom(struct de4x5_srom *p); +static void de4x5_dbg_rx(struct sk_buff *skb, int len); +static int de4x5_strncmp(char *a, char *b, int n); +static int dc21041_infoleaf(struct net_device *dev); +static int dc21140_infoleaf(struct net_device *dev); +static int dc21142_infoleaf(struct net_device *dev); +static int dc21143_infoleaf(struct net_device *dev); +static int type0_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type1_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type2_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type3_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type4_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type5_infoblock(struct net_device *dev, u_char count, u_char *p); +static int compact_infoblock(struct net_device *dev, u_char count, u_char *p); + +/* +** Note now that module autoprobing is allowed under EISA and PCI. The +** IRQ lines will not be auto-detected; instead I'll rely on the BIOSes +** to "do the right thing". +*/ + +static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */ + +module_param(io, int, 0); +module_param(de4x5_debug, int, 0); +module_param(dec_only, int, 0); +module_param(args, charp, 0); + +MODULE_PARM_DESC(io, "de4x5 I/O base address"); +MODULE_PARM_DESC(de4x5_debug, "de4x5 debug mask"); +MODULE_PARM_DESC(dec_only, "de4x5 probe only for Digital boards (0-1)"); +MODULE_PARM_DESC(args, "de4x5 full duplex and media type settings; see de4x5.c for details"); +MODULE_LICENSE("GPL"); + +/* +** List the SROM infoleaf functions and chipsets +*/ +struct InfoLeaf { + int chipset; + int (*fn)(struct net_device *); +}; +static struct InfoLeaf infoleaf_array[] = { + {DC21041, dc21041_infoleaf}, + {DC21140, dc21140_infoleaf}, + {DC21142, dc21142_infoleaf}, + {DC21143, dc21143_infoleaf} +}; +#define INFOLEAF_SIZE ARRAY_SIZE(infoleaf_array) + +/* +** List the SROM info block functions +*/ +static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = { + type0_infoblock, + type1_infoblock, + type2_infoblock, + type3_infoblock, + type4_infoblock, + type5_infoblock, + compact_infoblock +}; + +#define COMPACT (ARRAY_SIZE(dc_infoblock) - 1) + +/* +** Miscellaneous defines... +*/ +#define RESET_DE4X5 {\ + int i;\ + i=inl(DE4X5_BMR);\ + mdelay(1);\ + outl(i | BMR_SWR, DE4X5_BMR);\ + mdelay(1);\ + outl(i, DE4X5_BMR);\ + mdelay(1);\ + for (i=0;i<5;i++) {inl(DE4X5_BMR); mdelay(1);}\ + mdelay(1);\ +} + +#define PHY_HARD_RESET {\ + outl(GEP_HRST, DE4X5_GEP); /* Hard RESET the PHY dev. */\ + mdelay(1); /* Assert for 1ms */\ + outl(0x00, DE4X5_GEP);\ + mdelay(2); /* Wait for 2ms */\ +} + +static const struct net_device_ops de4x5_netdev_ops = { + .ndo_open = de4x5_open, + .ndo_stop = de4x5_close, + .ndo_start_xmit = de4x5_queue_pkt, + .ndo_get_stats = de4x5_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_do_ioctl = de4x5_ioctl, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address= eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + + +static int __devinit +de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev) +{ + char name[DE4X5_NAME_LENGTH + 1]; + struct de4x5_private *lp = netdev_priv(dev); + struct pci_dev *pdev = NULL; + int i, status=0; + + dev_set_drvdata(gendev, dev); + + /* Ensure we're not sleeping */ + if (lp->bus == EISA) { + outb(WAKEUP, PCI_CFPM); + } else { + pdev = to_pci_dev (gendev); + pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP); + } + mdelay(10); + + RESET_DE4X5; + + if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) { + return -ENXIO; /* Hardware could not reset */ + } + + /* + ** Now find out what kind of DC21040/DC21041/DC21140 board we have. + */ + lp->useSROM = false; + if (lp->bus == PCI) { + PCI_signature(name, lp); + } else { + EISA_signature(name, gendev); + } + + if (*name == '\0') { /* Not found a board signature */ + return -ENXIO; + } + + dev->base_addr = iobase; + printk ("%s: %s at 0x%04lx", dev_name(gendev), name, iobase); + + status = get_hw_addr(dev); + printk(", h/w address %pM\n", dev->dev_addr); + + if (status != 0) { + printk(" which has an Ethernet PROM CRC error.\n"); + return -ENXIO; + } else { + skb_queue_head_init(&lp->cache.queue); + lp->cache.gepc = GEP_INIT; + lp->asBit = GEP_SLNK; + lp->asPolarity = GEP_SLNK; + lp->asBitValid = ~0; + lp->timeout = -1; + lp->gendev = gendev; + spin_lock_init(&lp->lock); + init_timer(&lp->timer); + lp->timer.function = (void (*)(unsigned long))de4x5_ast; + lp->timer.data = (unsigned long)dev; + de4x5_parse_params(dev); + + /* + ** Choose correct autosensing in case someone messed up + */ + lp->autosense = lp->params.autosense; + if (lp->chipset != DC21140) { + if ((lp->chipset==DC21040) && (lp->params.autosense&TP_NW)) { + lp->params.autosense = TP; + } + if ((lp->chipset==DC21041) && (lp->params.autosense&BNC_AUI)) { + lp->params.autosense = BNC; + } + } + lp->fdx = lp->params.fdx; + sprintf(lp->adapter_name,"%s (%s)", name, dev_name(gendev)); + + lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc); +#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY) + lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN; +#endif + lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size, + &lp->dma_rings, GFP_ATOMIC); + if (lp->rx_ring == NULL) { + return -ENOMEM; + } + + lp->tx_ring = lp->rx_ring + NUM_RX_DESC; + + /* + ** Set up the RX descriptor ring (Intels) + ** Allocate contiguous receive buffers, long word aligned (Alphas) + */ +#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY) + for (i=0; i<NUM_RX_DESC; i++) { + lp->rx_ring[i].status = 0; + lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); + lp->rx_ring[i].buf = 0; + lp->rx_ring[i].next = 0; + lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */ + } + +#else + { + dma_addr_t dma_rx_bufs; + + dma_rx_bufs = lp->dma_rings + (NUM_RX_DESC + NUM_TX_DESC) + * sizeof(struct de4x5_desc); + dma_rx_bufs = (dma_rx_bufs + DE4X5_ALIGN) & ~DE4X5_ALIGN; + lp->rx_bufs = (char *)(((long)(lp->rx_ring + NUM_RX_DESC + + NUM_TX_DESC) + DE4X5_ALIGN) & ~DE4X5_ALIGN); + for (i=0; i<NUM_RX_DESC; i++) { + lp->rx_ring[i].status = 0; + lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); + lp->rx_ring[i].buf = + cpu_to_le32(dma_rx_bufs+i*RX_BUFF_SZ); + lp->rx_ring[i].next = 0; + lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */ + } + + } +#endif + + barrier(); + + lp->rxRingSize = NUM_RX_DESC; + lp->txRingSize = NUM_TX_DESC; + + /* Write the end of list marker to the descriptor lists */ + lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER); + lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER); + + /* Tell the adapter where the TX/RX rings are located. */ + outl(lp->dma_rings, DE4X5_RRBA); + outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), + DE4X5_TRBA); + + /* Initialise the IRQ mask and Enable/Disable */ + lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM; + lp->irq_en = IMR_NIM | IMR_AIM; + + /* Create a loopback packet frame for later media probing */ + create_packet(dev, lp->frame, sizeof(lp->frame)); + + /* Check if the RX overflow bug needs testing for */ + i = lp->cfrv & 0x000000fe; + if ((lp->chipset == DC21140) && (i == 0x20)) { + lp->rx_ovf = 1; + } + + /* Initialise the SROM pointers if possible */ + if (lp->useSROM) { + lp->state = INITIALISED; + if (srom_infoleaf_info(dev)) { + dma_free_coherent (gendev, lp->dma_size, + lp->rx_ring, lp->dma_rings); + return -ENXIO; + } + srom_init(dev); + } + + lp->state = CLOSED; + + /* + ** Check for an MII interface + */ + if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) { + mii_get_phy(dev); + } + + printk(" and requires IRQ%d (provided by %s).\n", dev->irq, + ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG")); + } + + if (de4x5_debug & DEBUG_VERSION) { + printk(version); + } + + /* The DE4X5-specific entries in the device structure. */ + SET_NETDEV_DEV(dev, gendev); + dev->netdev_ops = &de4x5_netdev_ops; + dev->mem_start = 0; + + /* Fill in the generic fields of the device structure. */ + if ((status = register_netdev (dev))) { + dma_free_coherent (gendev, lp->dma_size, + lp->rx_ring, lp->dma_rings); + return status; + } + + /* Let the adapter sleep to save power */ + yawn(dev, SLEEP); + + return status; +} + + +static int +de4x5_open(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, status = 0; + s32 omr; + + /* Allocate the RX buffers */ + for (i=0; i<lp->rxRingSize; i++) { + if (de4x5_alloc_rx_buff(dev, i, 0) == NULL) { + de4x5_free_rx_buffs(dev); + return -EAGAIN; + } + } + + /* + ** Wake up the adapter + */ + yawn(dev, WAKEUP); + + /* + ** Re-initialize the DE4X5... + */ + status = de4x5_init(dev); + spin_lock_init(&lp->lock); + lp->state = OPEN; + de4x5_dbg_open(dev); + + if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED, + lp->adapter_name, dev)) { + printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq); + if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED, + lp->adapter_name, dev)) { + printk("\n Cannot get IRQ- reconfigure your hardware.\n"); + disable_ast(dev); + de4x5_free_rx_buffs(dev); + de4x5_free_tx_buffs(dev); + yawn(dev, SLEEP); + lp->state = CLOSED; + return -EAGAIN; + } else { + printk("\n Succeeded, but you should reconfigure your hardware to avoid this.\n"); + printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n"); + } + } + + lp->interrupt = UNMASK_INTERRUPTS; + dev->trans_start = jiffies; /* prevent tx timeout */ + + START_DE4X5; + + de4x5_setup_intr(dev); + + if (de4x5_debug & DEBUG_OPEN) { + printk("\tsts: 0x%08x\n", inl(DE4X5_STS)); + printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR)); + printk("\timr: 0x%08x\n", inl(DE4X5_IMR)); + printk("\tomr: 0x%08x\n", inl(DE4X5_OMR)); + printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR)); + printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR)); + printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR)); + printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR)); + } + + return status; +} + +/* +** Initialize the DE4X5 operating conditions. NB: a chip problem with the +** DC21140 requires using perfect filtering mode for that chip. Since I can't +** see why I'd want > 14 multicast addresses, I have changed all chips to use +** the perfect filtering mode. Keep the DMA burst length at 8: there seems +** to be data corruption problems if it is larger (UDP errors seen from a +** ttcp source). +*/ +static int +de4x5_init(struct net_device *dev) +{ + /* Lock out other processes whilst setting up the hardware */ + netif_stop_queue(dev); + + de4x5_sw_reset(dev); + + /* Autoconfigure the connected port */ + autoconf_media(dev); + + return 0; +} + +static int +de4x5_sw_reset(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, j, status = 0; + s32 bmr, omr; + + /* Select the MII or SRL port now and RESET the MAC */ + if (!lp->useSROM) { + if (lp->phy[lp->active].id != 0) { + lp->infoblock_csr6 = OMR_SDP | OMR_PS | OMR_HBD; + } else { + lp->infoblock_csr6 = OMR_SDP | OMR_TTM; + } + de4x5_switch_mac_port(dev); + } + + /* + ** Set the programmable burst length to 8 longwords for all the DC21140 + ** Fasternet chips and 4 longwords for all others: DMA errors result + ** without these values. Cache align 16 long. + */ + bmr = (lp->chipset==DC21140 ? PBL_8 : PBL_4) | DESC_SKIP_LEN | DE4X5_CACHE_ALIGN; + bmr |= ((lp->chipset & ~0x00ff)==DC2114x ? BMR_RML : 0); + outl(bmr, DE4X5_BMR); + + omr = inl(DE4X5_OMR) & ~OMR_PR; /* Turn off promiscuous mode */ + if (lp->chipset == DC21140) { + omr |= (OMR_SDP | OMR_SB); + } + lp->setup_f = PERFECT; + outl(lp->dma_rings, DE4X5_RRBA); + outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), + DE4X5_TRBA); + + lp->rx_new = lp->rx_old = 0; + lp->tx_new = lp->tx_old = 0; + + for (i = 0; i < lp->rxRingSize; i++) { + lp->rx_ring[i].status = cpu_to_le32(R_OWN); + } + + for (i = 0; i < lp->txRingSize; i++) { + lp->tx_ring[i].status = cpu_to_le32(0); + } + + barrier(); + + /* Build the setup frame depending on filtering mode */ + SetMulticastFilter(dev); + + load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1); + outl(omr|OMR_ST, DE4X5_OMR); + + /* Poll for setup frame completion (adapter interrupts are disabled now) */ + + for (j=0, i=0;(i<500) && (j==0);i++) { /* Up to 500ms delay */ + mdelay(1); + if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1; + } + outl(omr, DE4X5_OMR); /* Stop everything! */ + + if (j == 0) { + printk("%s: Setup frame timed out, status %08x\n", dev->name, + inl(DE4X5_STS)); + status = -EIO; + } + + lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; + lp->tx_old = lp->tx_new; + + return status; +} + +/* +** Writes a socket buffer address to the next available transmit descriptor. +*/ +static netdev_tx_t +de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_long flags = 0; + + netif_stop_queue(dev); + if (!lp->tx_enable) /* Cannot send for now */ + return NETDEV_TX_LOCKED; + + /* + ** Clean out the TX ring asynchronously to interrupts - sometimes the + ** interrupts are lost by delayed descriptor status updates relative to + ** the irq assertion, especially with a busy PCI bus. + */ + spin_lock_irqsave(&lp->lock, flags); + de4x5_tx(dev); + spin_unlock_irqrestore(&lp->lock, flags); + + /* Test if cache is already locked - requeue skb if so */ + if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt) + return NETDEV_TX_LOCKED; + + /* Transmit descriptor ring full or stale skb */ + if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) { + if (lp->interrupt) { + de4x5_putb_cache(dev, skb); /* Requeue the buffer */ + } else { + de4x5_put_cache(dev, skb); + } + if (de4x5_debug & DEBUG_TX) { + printk("%s: transmit busy, lost media or stale skb found:\n STS:%08x\n tbusy:%d\n IMR:%08x\n OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO"); + } + } else if (skb->len > 0) { + /* If we already have stuff queued locally, use that first */ + if (!skb_queue_empty(&lp->cache.queue) && !lp->interrupt) { + de4x5_put_cache(dev, skb); + skb = de4x5_get_cache(dev); + } + + while (skb && !netif_queue_stopped(dev) && + (u_long) lp->tx_skb[lp->tx_new] <= 1) { + spin_lock_irqsave(&lp->lock, flags); + netif_stop_queue(dev); + load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb); + lp->stats.tx_bytes += skb->len; + outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */ + + lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; + + if (TX_BUFFS_AVAIL) { + netif_start_queue(dev); /* Another pkt may be queued */ + } + skb = de4x5_get_cache(dev); + spin_unlock_irqrestore(&lp->lock, flags); + } + if (skb) de4x5_putb_cache(dev, skb); + } + + lp->cache.lock = 0; + + return NETDEV_TX_OK; +} + +/* +** The DE4X5 interrupt handler. +** +** I/O Read/Writes through intermediate PCI bridges are never 'posted', +** so that the asserted interrupt always has some real data to work with - +** if these I/O accesses are ever changed to memory accesses, ensure the +** STS write is read immediately to complete the transaction if the adapter +** is not on bus 0. Lost interrupts can still occur when the PCI bus load +** is high and descriptor status bits cannot be set before the associated +** interrupt is asserted and this routine entered. +*/ +static irqreturn_t +de4x5_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct de4x5_private *lp; + s32 imr, omr, sts, limit; + u_long iobase; + unsigned int handled = 0; + + lp = netdev_priv(dev); + spin_lock(&lp->lock); + iobase = dev->base_addr; + + DISABLE_IRQs; /* Ensure non re-entrancy */ + + if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt)) + printk("%s: Re-entering the interrupt handler.\n", dev->name); + + synchronize_irq(dev->irq); + + for (limit=0; limit<8; limit++) { + sts = inl(DE4X5_STS); /* Read IRQ status */ + outl(sts, DE4X5_STS); /* Reset the board interrupts */ + + if (!(sts & lp->irq_mask)) break;/* All done */ + handled = 1; + + if (sts & (STS_RI | STS_RU)) /* Rx interrupt (packet[s] arrived) */ + de4x5_rx(dev); + + if (sts & (STS_TI | STS_TU)) /* Tx interrupt (packet sent) */ + de4x5_tx(dev); + + if (sts & STS_LNF) { /* TP Link has failed */ + lp->irq_mask &= ~IMR_LFM; + } + + if (sts & STS_UNF) { /* Transmit underrun */ + de4x5_txur(dev); + } + + if (sts & STS_SE) { /* Bus Error */ + STOP_DE4X5; + printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n", + dev->name, sts); + spin_unlock(&lp->lock); + return IRQ_HANDLED; + } + } + + /* Load the TX ring with any locally stored packets */ + if (!test_and_set_bit(0, (void *)&lp->cache.lock)) { + while (!skb_queue_empty(&lp->cache.queue) && !netif_queue_stopped(dev) && lp->tx_enable) { + de4x5_queue_pkt(de4x5_get_cache(dev), dev); + } + lp->cache.lock = 0; + } + + lp->interrupt = UNMASK_INTERRUPTS; + ENABLE_IRQs; + spin_unlock(&lp->lock); + + return IRQ_RETVAL(handled); +} + +static int +de4x5_rx(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int entry; + s32 status; + + for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0; + entry=lp->rx_new) { + status = (s32)le32_to_cpu(lp->rx_ring[entry].status); + + if (lp->rx_ovf) { + if (inl(DE4X5_MFC) & MFC_FOCM) { + de4x5_rx_ovfc(dev); + break; + } + } + + if (status & RD_FS) { /* Remember the start of frame */ + lp->rx_old = entry; + } + + if (status & RD_LS) { /* Valid frame status */ + if (lp->tx_enable) lp->linkOK++; + if (status & RD_ES) { /* There was an error. */ + lp->stats.rx_errors++; /* Update the error stats. */ + if (status & (RD_RF | RD_TL)) lp->stats.rx_frame_errors++; + if (status & RD_CE) lp->stats.rx_crc_errors++; + if (status & RD_OF) lp->stats.rx_fifo_errors++; + if (status & RD_TL) lp->stats.rx_length_errors++; + if (status & RD_RF) lp->pktStats.rx_runt_frames++; + if (status & RD_CS) lp->pktStats.rx_collision++; + if (status & RD_DB) lp->pktStats.rx_dribble++; + if (status & RD_OF) lp->pktStats.rx_overflow++; + } else { /* A valid frame received */ + struct sk_buff *skb; + short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status) + >> 16) - 4; + + if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) { + printk("%s: Insufficient memory; nuking packet.\n", + dev->name); + lp->stats.rx_dropped++; + } else { + de4x5_dbg_rx(skb, pkt_len); + + /* Push up the protocol stack */ + skb->protocol=eth_type_trans(skb,dev); + de4x5_local_stats(dev, skb->data, pkt_len); + netif_rx(skb); + + /* Update stats */ + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len; + } + } + + /* Change buffer ownership for this frame, back to the adapter */ + for (;lp->rx_old!=entry;lp->rx_old=(lp->rx_old + 1)%lp->rxRingSize) { + lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN); + barrier(); + } + lp->rx_ring[entry].status = cpu_to_le32(R_OWN); + barrier(); + } + + /* + ** Update entry information + */ + lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize; + } + + return 0; +} + +static inline void +de4x5_free_tx_buff(struct de4x5_private *lp, int entry) +{ + dma_unmap_single(lp->gendev, le32_to_cpu(lp->tx_ring[entry].buf), + le32_to_cpu(lp->tx_ring[entry].des1) & TD_TBS1, + DMA_TO_DEVICE); + if ((u_long) lp->tx_skb[entry] > 1) + dev_kfree_skb_irq(lp->tx_skb[entry]); + lp->tx_skb[entry] = NULL; +} + +/* +** Buffer sent - check for TX buffer errors. +*/ +static int +de4x5_tx(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int entry; + s32 status; + + for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) { + status = (s32)le32_to_cpu(lp->tx_ring[entry].status); + if (status < 0) { /* Buffer not sent yet */ + break; + } else if (status != 0x7fffffff) { /* Not setup frame */ + if (status & TD_ES) { /* An error happened */ + lp->stats.tx_errors++; + if (status & TD_NC) lp->stats.tx_carrier_errors++; + if (status & TD_LC) lp->stats.tx_window_errors++; + if (status & TD_UF) lp->stats.tx_fifo_errors++; + if (status & TD_EC) lp->pktStats.excessive_collisions++; + if (status & TD_DE) lp->stats.tx_aborted_errors++; + + if (TX_PKT_PENDING) { + outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */ + } + } else { /* Packet sent */ + lp->stats.tx_packets++; + if (lp->tx_enable) lp->linkOK++; + } + /* Update the collision counter */ + lp->stats.collisions += ((status & TD_EC) ? 16 : + ((status & TD_CC) >> 3)); + + /* Free the buffer. */ + if (lp->tx_skb[entry] != NULL) + de4x5_free_tx_buff(lp, entry); + } + + /* Update all the pointers */ + lp->tx_old = (lp->tx_old + 1) % lp->txRingSize; + } + + /* Any resources available? */ + if (TX_BUFFS_AVAIL && netif_queue_stopped(dev)) { + if (lp->interrupt) + netif_wake_queue(dev); + else + netif_start_queue(dev); + } + + return 0; +} + +static void +de4x5_ast(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int next_tick = DE4X5_AUTOSENSE_MS; + int dt; + + if (lp->useSROM) + next_tick = srom_autoconf(dev); + else if (lp->chipset == DC21140) + next_tick = dc21140m_autoconf(dev); + else if (lp->chipset == DC21041) + next_tick = dc21041_autoconf(dev); + else if (lp->chipset == DC21040) + next_tick = dc21040_autoconf(dev); + lp->linkOK = 0; + + dt = (next_tick * HZ) / 1000; + + if (!dt) + dt = 1; + + mod_timer(&lp->timer, jiffies + dt); +} + +static int +de4x5_txur(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int omr; + + omr = inl(DE4X5_OMR); + if (!(omr & OMR_SF) || (lp->chipset==DC21041) || (lp->chipset==DC21040)) { + omr &= ~(OMR_ST|OMR_SR); + outl(omr, DE4X5_OMR); + while (inl(DE4X5_STS) & STS_TS); + if ((omr & OMR_TR) < OMR_TR) { + omr += 0x4000; + } else { + omr |= OMR_SF; + } + outl(omr | OMR_ST | OMR_SR, DE4X5_OMR); + } + + return 0; +} + +static int +de4x5_rx_ovfc(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int omr; + + omr = inl(DE4X5_OMR); + outl(omr & ~OMR_SR, DE4X5_OMR); + while (inl(DE4X5_STS) & STS_RS); + + for (; (s32)le32_to_cpu(lp->rx_ring[lp->rx_new].status)>=0;) { + lp->rx_ring[lp->rx_new].status = cpu_to_le32(R_OWN); + lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize; + } + + outl(omr, DE4X5_OMR); + + return 0; +} + +static int +de4x5_close(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 imr, omr; + + disable_ast(dev); + + netif_stop_queue(dev); + + if (de4x5_debug & DEBUG_CLOSE) { + printk("%s: Shutting down ethercard, status was %8.8x.\n", + dev->name, inl(DE4X5_STS)); + } + + /* + ** We stop the DE4X5 here... mask interrupts and stop TX & RX + */ + DISABLE_IRQs; + STOP_DE4X5; + + /* Free the associated irq */ + free_irq(dev->irq, dev); + lp->state = CLOSED; + + /* Free any socket buffers */ + de4x5_free_rx_buffs(dev); + de4x5_free_tx_buffs(dev); + + /* Put the adapter to sleep to save power */ + yawn(dev, SLEEP); + + return 0; +} + +static struct net_device_stats * +de4x5_get_stats(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR)); + + return &lp->stats; +} + +static void +de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + + for (i=1; i<DE4X5_PKT_STAT_SZ-1; i++) { + if (pkt_len < (i*DE4X5_PKT_BIN_SZ)) { + lp->pktStats.bins[i]++; + i = DE4X5_PKT_STAT_SZ; + } + } + if (is_multicast_ether_addr(buf)) { + if (is_broadcast_ether_addr(buf)) { + lp->pktStats.broadcast++; + } else { + lp->pktStats.multicast++; + } + } else if (compare_ether_addr(buf, dev->dev_addr) == 0) { + lp->pktStats.unicast++; + } + + lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ + if (lp->pktStats.bins[0] == 0) { /* Reset counters */ + memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats)); + } +} + +/* +** Removes the TD_IC flag from previous descriptor to improve TX performance. +** If the flag is changed on a descriptor that is being read by the hardware, +** I assume PCI transaction ordering will mean you are either successful or +** just miss asserting the change to the hardware. Anyway you're messing with +** a descriptor you don't own, but this shouldn't kill the chip provided +** the descriptor register is read only to the hardware. +*/ +static void +load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb) +{ + struct de4x5_private *lp = netdev_priv(dev); + int entry = (lp->tx_new ? lp->tx_new-1 : lp->txRingSize-1); + dma_addr_t buf_dma = dma_map_single(lp->gendev, buf, flags & TD_TBS1, DMA_TO_DEVICE); + + lp->tx_ring[lp->tx_new].buf = cpu_to_le32(buf_dma); + lp->tx_ring[lp->tx_new].des1 &= cpu_to_le32(TD_TER); + lp->tx_ring[lp->tx_new].des1 |= cpu_to_le32(flags); + lp->tx_skb[lp->tx_new] = skb; + lp->tx_ring[entry].des1 &= cpu_to_le32(~TD_IC); + barrier(); + + lp->tx_ring[lp->tx_new].status = cpu_to_le32(T_OWN); + barrier(); +} + +/* +** Set or clear the multicast filter for this adaptor. +*/ +static void +set_multicast_list(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + /* First, double check that the adapter is open */ + if (lp->state == OPEN) { + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + u32 omr; + omr = inl(DE4X5_OMR); + omr |= OMR_PR; + outl(omr, DE4X5_OMR); + } else { + SetMulticastFilter(dev); + load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET | + SETUP_FRAME_LEN, (struct sk_buff *)1); + + lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; + outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */ + dev->trans_start = jiffies; /* prevent tx timeout */ + } + } +} + +/* +** Calculate the hash code and update the logical address filter +** from a list of ethernet multicast addresses. +** Little endian crc one liner from Matt Thomas, DEC. +*/ +static void +SetMulticastFilter(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct netdev_hw_addr *ha; + u_long iobase = dev->base_addr; + int i, bit, byte; + u16 hashcode; + u32 omr, crc; + char *pa; + unsigned char *addrs; + + omr = inl(DE4X5_OMR); + omr &= ~(OMR_PR | OMR_PM); + pa = build_setup_frame(dev, ALL); /* Build the basic frame */ + + if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 14)) { + omr |= OMR_PM; /* Pass all multicasts */ + } else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */ + netdev_for_each_mc_addr(ha, dev) { + crc = ether_crc_le(ETH_ALEN, ha->addr); + hashcode = crc & HASH_BITS; /* hashcode is 9 LSb of CRC */ + + byte = hashcode >> 3; /* bit[3-8] -> byte in filter */ + bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */ + + byte <<= 1; /* calc offset into setup frame */ + if (byte & 0x02) { + byte -= 1; + } + lp->setup_frame[byte] |= bit; + } + } else { /* Perfect filtering */ + netdev_for_each_mc_addr(ha, dev) { + addrs = ha->addr; + for (i=0; i<ETH_ALEN; i++) { + *(pa + (i&1)) = *addrs++; + if (i & 0x01) pa += 4; + } + } + } + outl(omr, DE4X5_OMR); +} + +#ifdef CONFIG_EISA + +static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST; + +static int __init de4x5_eisa_probe (struct device *gendev) +{ + struct eisa_device *edev; + u_long iobase; + u_char irq, regval; + u_short vendor; + u32 cfid; + int status, device; + struct net_device *dev; + struct de4x5_private *lp; + + edev = to_eisa_device (gendev); + iobase = edev->base_addr; + + if (!request_region (iobase, DE4X5_EISA_TOTAL_SIZE, "de4x5")) + return -EBUSY; + + if (!request_region (iobase + DE4X5_EISA_IO_PORTS, + DE4X5_EISA_TOTAL_SIZE, "de4x5")) { + status = -EBUSY; + goto release_reg_1; + } + + if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) { + status = -ENOMEM; + goto release_reg_2; + } + lp = netdev_priv(dev); + + cfid = (u32) inl(PCI_CFID); + lp->cfrv = (u_short) inl(PCI_CFRV); + device = (cfid >> 8) & 0x00ffff00; + vendor = (u_short) cfid; + + /* Read the EISA Configuration Registers */ + regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT); +#ifdef CONFIG_ALPHA + /* Looks like the Jensen firmware (rev 2.2) doesn't really + * care about the EISA configuration, and thus doesn't + * configure the PLX bridge properly. Oh well... Simply mimic + * the EISA config file to sort it out. */ + + /* EISA REG1: Assert DecChip 21040 HW Reset */ + outb (ER1_IAM | 1, EISA_REG1); + mdelay (1); + + /* EISA REG1: Deassert DecChip 21040 HW Reset */ + outb (ER1_IAM, EISA_REG1); + mdelay (1); + + /* EISA REG3: R/W Burst Transfer Enable */ + outb (ER3_BWE | ER3_BRE, EISA_REG3); + + /* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */ + outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0); +#endif + irq = de4x5_irq[(regval >> 1) & 0x03]; + + if (is_DC2114x) { + device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143); + } + lp->chipset = device; + lp->bus = EISA; + + /* Write the PCI Configuration Registers */ + outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS); + outl(0x00006000, PCI_CFLT); + outl(iobase, PCI_CBIO); + + DevicePresent(dev, EISA_APROM); + + dev->irq = irq; + + if (!(status = de4x5_hw_init (dev, iobase, gendev))) { + return 0; + } + + free_netdev (dev); + release_reg_2: + release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE); + release_reg_1: + release_region (iobase, DE4X5_EISA_TOTAL_SIZE); + + return status; +} + +static int __devexit de4x5_eisa_remove (struct device *device) +{ + struct net_device *dev; + u_long iobase; + + dev = dev_get_drvdata(device); + iobase = dev->base_addr; + + unregister_netdev (dev); + free_netdev (dev); + release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE); + release_region (iobase, DE4X5_EISA_TOTAL_SIZE); + + return 0; +} + +static struct eisa_device_id de4x5_eisa_ids[] = { + { "DEC4250", 0 }, /* 0 is the board name index... */ + { "" } +}; +MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); + +static struct eisa_driver de4x5_eisa_driver = { + .id_table = de4x5_eisa_ids, + .driver = { + .name = "de4x5", + .probe = de4x5_eisa_probe, + .remove = __devexit_p (de4x5_eisa_remove), + } +}; +MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); +#endif + +#ifdef CONFIG_PCI + +/* +** This function searches the current bus (which is >0) for a DECchip with an +** SROM, so that in multiport cards that have one SROM shared between multiple +** DECchips, we can find the base SROM irrespective of the BIOS scan direction. +** For single port cards this is a time waster... +*/ +static void __devinit +srom_search(struct net_device *dev, struct pci_dev *pdev) +{ + u_char pb; + u_short vendor, status; + u_int irq = 0, device; + u_long iobase = 0; /* Clear upper 32 bits in Alphas */ + int i, j; + struct de4x5_private *lp = netdev_priv(dev); + struct list_head *walk; + + list_for_each(walk, &pdev->bus_list) { + struct pci_dev *this_dev = pci_dev_b(walk); + + /* Skip the pci_bus list entry */ + if (list_entry(walk, struct pci_bus, devices) == pdev->bus) continue; + + vendor = this_dev->vendor; + device = this_dev->device << 8; + if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) continue; + + /* Get the chip configuration revision register */ + pb = this_dev->bus->number; + + /* Set the device number information */ + lp->device = PCI_SLOT(this_dev->devfn); + lp->bus_num = pb; + + /* Set the chipset information */ + if (is_DC2114x) { + device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK + ? DC21142 : DC21143); + } + lp->chipset = device; + + /* Get the board I/O address (64 bits on sparc64) */ + iobase = pci_resource_start(this_dev, 0); + + /* Fetch the IRQ to be used */ + irq = this_dev->irq; + if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue; + + /* Check if I/O accesses are enabled */ + pci_read_config_word(this_dev, PCI_COMMAND, &status); + if (!(status & PCI_COMMAND_IO)) continue; + + /* Search for a valid SROM attached to this DECchip */ + DevicePresent(dev, DE4X5_APROM); + for (j=0, i=0; i<ETH_ALEN; i++) { + j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i); + } + if (j != 0 && j != 6 * 0xff) { + last.chipset = device; + last.bus = pb; + last.irq = irq; + for (i=0; i<ETH_ALEN; i++) { + last.addr[i] = (u_char)*((u_char *)&lp->srom + SROM_HWADD + i); + } + return; + } + } +} + +/* +** PCI bus I/O device probe +** NB: PCI I/O accesses and Bus Mastering are enabled by the PCI BIOS, not +** the driver. Some PCI BIOS's, pre V2.1, need the slot + features to be +** enabled by the user first in the set up utility. Hence we just check for +** enabled features and silently ignore the card if they're not. +** +** STOP PRESS: Some BIOS's __require__ the driver to enable the bus mastering +** bit. Here, check for I/O accesses and then set BM. If you put the card in +** a non BM slot, you're on your own (and complain to the PC vendor that your +** PC doesn't conform to the PCI standard)! +** +** This function is only compatible with the *latest* 2.1.x kernels. For 2.0.x +** kernels use the V0.535[n] drivers. +*/ + +static int __devinit de4x5_pci_probe (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + u_char pb, pbus = 0, dev_num, dnum = 0, timer; + u_short vendor, status; + u_int irq = 0, device; + u_long iobase = 0; /* Clear upper 32 bits in Alphas */ + int error; + struct net_device *dev; + struct de4x5_private *lp; + + dev_num = PCI_SLOT(pdev->devfn); + pb = pdev->bus->number; + + if (io) { /* probe a single PCI device */ + pbus = (u_short)(io >> 8); + dnum = (u_short)(io & 0xff); + if ((pbus != pb) || (dnum != dev_num)) + return -ENODEV; + } + + vendor = pdev->vendor; + device = pdev->device << 8; + if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) + return -ENODEV; + + /* Ok, the device seems to be for us. */ + if ((error = pci_enable_device (pdev))) + return error; + + if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) { + error = -ENOMEM; + goto disable_dev; + } + + lp = netdev_priv(dev); + lp->bus = PCI; + lp->bus_num = 0; + + /* Search for an SROM on this bus */ + if (lp->bus_num != pb) { + lp->bus_num = pb; + srom_search(dev, pdev); + } + + /* Get the chip configuration revision register */ + lp->cfrv = pdev->revision; + + /* Set the device number information */ + lp->device = dev_num; + lp->bus_num = pb; + + /* Set the chipset information */ + if (is_DC2114x) { + device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143); + } + lp->chipset = device; + + /* Get the board I/O address (64 bits on sparc64) */ + iobase = pci_resource_start(pdev, 0); + + /* Fetch the IRQ to be used */ + irq = pdev->irq; + if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) { + error = -ENODEV; + goto free_dev; + } + + /* Check if I/O accesses and Bus Mastering are enabled */ + pci_read_config_word(pdev, PCI_COMMAND, &status); +#ifdef __powerpc__ + if (!(status & PCI_COMMAND_IO)) { + status |= PCI_COMMAND_IO; + pci_write_config_word(pdev, PCI_COMMAND, status); + pci_read_config_word(pdev, PCI_COMMAND, &status); + } +#endif /* __powerpc__ */ + if (!(status & PCI_COMMAND_IO)) { + error = -ENODEV; + goto free_dev; + } + + if (!(status & PCI_COMMAND_MASTER)) { + status |= PCI_COMMAND_MASTER; + pci_write_config_word(pdev, PCI_COMMAND, status); + pci_read_config_word(pdev, PCI_COMMAND, &status); + } + if (!(status & PCI_COMMAND_MASTER)) { + error = -ENODEV; + goto free_dev; + } + + /* Check the latency timer for values >= 0x60 */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &timer); + if (timer < 0x60) { + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60); + } + + DevicePresent(dev, DE4X5_APROM); + + if (!request_region (iobase, DE4X5_PCI_TOTAL_SIZE, "de4x5")) { + error = -EBUSY; + goto free_dev; + } + + dev->irq = irq; + + if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) { + goto release; + } + + return 0; + + release: + release_region (iobase, DE4X5_PCI_TOTAL_SIZE); + free_dev: + free_netdev (dev); + disable_dev: + pci_disable_device (pdev); + return error; +} + +static void __devexit de4x5_pci_remove (struct pci_dev *pdev) +{ + struct net_device *dev; + u_long iobase; + + dev = dev_get_drvdata(&pdev->dev); + iobase = dev->base_addr; + + unregister_netdev (dev); + free_netdev (dev); + release_region (iobase, DE4X5_PCI_TOTAL_SIZE); + pci_disable_device (pdev); +} + +static struct pci_device_id de4x5_pci_tbl[] = { + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { }, +}; + +static struct pci_driver de4x5_pci_driver = { + .name = "de4x5", + .id_table = de4x5_pci_tbl, + .probe = de4x5_pci_probe, + .remove = __devexit_p (de4x5_pci_remove), +}; + +#endif + +/* +** Auto configure the media here rather than setting the port at compile +** time. This routine is called by de4x5_init() and when a loss of media is +** detected (excessive collisions, loss of carrier, no carrier or link fail +** [TP] or no recent receive activity) to check whether the user has been +** sneaky and changed the port on us. +*/ +static int +autoconf_media(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + disable_ast(dev); + + lp->c_media = AUTO; /* Bogus last media */ + inl(DE4X5_MFC); /* Zero the lost frames counter */ + lp->media = INIT; + lp->tcount = 0; + + de4x5_ast(dev); + + return lp->media; +} + +/* +** Autoconfigure the media when using the DC21040. AUI cannot be distinguished +** from BNC as the port has a jumper to set thick or thin wire. When set for +** BNC, the BNC port will indicate activity if it's not terminated correctly. +** The only way to test for that is to place a loopback packet onto the +** network and watch for errors. Since we're messing with the interrupt mask +** register, disable the board interrupts and do not allow any more packets to +** be queued to the hardware. Re-enable everything only when the media is +** found. +** I may have to "age out" locally queued packets so that the higher layer +** timeouts don't effectively duplicate packets on the network. +*/ +static int +dc21040_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int next_tick = DE4X5_AUTOSENSE_MS; + s32 imr; + + switch (lp->media) { + case INIT: + DISABLE_IRQs; + lp->tx_enable = false; + lp->timeout = -1; + de4x5_save_skbs(dev); + if ((lp->autosense == AUTO) || (lp->autosense == TP)) { + lp->media = TP; + } else if ((lp->autosense == BNC) || (lp->autosense == AUI) || (lp->autosense == BNC_AUI)) { + lp->media = BNC_AUI; + } else if (lp->autosense == EXT_SIA) { + lp->media = EXT_SIA; + } else { + lp->media = NC; + } + lp->local_state = 0; + next_tick = dc21040_autoconf(dev); + break; + + case TP: + next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI, + TP_SUSPECT, test_tp); + break; + + case TP_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf); + break; + + case BNC: + case AUI: + case BNC_AUI: + next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA, + BNC_AUI_SUSPECT, ping_media); + break; + + case BNC_AUI_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf); + break; + + case EXT_SIA: + next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000, + NC, EXT_SIA_SUSPECT, ping_media); + break; + + case EXT_SIA_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf); + break; + + case NC: + /* default to TP for all */ + reset_init_sia(dev, 0x8f01, 0xffff, 0x0000); + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tx_enable = false; + break; + } + + return next_tick; +} + +static int +dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, + int next_state, int suspect_state, + int (*fn)(struct net_device *, int)) +{ + struct de4x5_private *lp = netdev_priv(dev); + int next_tick = DE4X5_AUTOSENSE_MS; + int linkBad; + + switch (lp->local_state) { + case 0: + reset_init_sia(dev, csr13, csr14, csr15); + lp->local_state++; + next_tick = 500; + break; + + case 1: + if (!lp->tx_enable) { + linkBad = fn(dev, timeout); + if (linkBad < 0) { + next_tick = linkBad & ~TIMER_CB; + } else { + if (linkBad && (lp->autosense == AUTO)) { + lp->local_state = 0; + lp->media = next_state; + } else { + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = suspect_state; + next_tick = 3000; + } + break; + } + + return next_tick; +} + +static int +de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, + int (*fn)(struct net_device *, int), + int (*asfn)(struct net_device *)) +{ + struct de4x5_private *lp = netdev_priv(dev); + int next_tick = DE4X5_AUTOSENSE_MS; + int linkBad; + + switch (lp->local_state) { + case 1: + if (lp->linkOK) { + lp->media = prev_state; + } else { + lp->local_state++; + next_tick = asfn(dev); + } + break; + + case 2: + linkBad = fn(dev, timeout); + if (linkBad < 0) { + next_tick = linkBad & ~TIMER_CB; + } else if (!linkBad) { + lp->local_state--; + lp->media = prev_state; + } else { + lp->media = INIT; + lp->tcount++; + } + } + + return next_tick; +} + +/* +** Autoconfigure the media when using the DC21041. AUI needs to be tested +** before BNC, because the BNC port will indicate activity if it's not +** terminated correctly. The only way to test for that is to place a loopback +** packet onto the network and watch for errors. Since we're messing with +** the interrupt mask register, disable the board interrupts and do not allow +** any more packets to be queued to the hardware. Re-enable everything only +** when the media is found. +*/ +static int +dc21041_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 sts, irqs, irq_mask, imr, omr; + int next_tick = DE4X5_AUTOSENSE_MS; + + switch (lp->media) { + case INIT: + DISABLE_IRQs; + lp->tx_enable = false; + lp->timeout = -1; + de4x5_save_skbs(dev); /* Save non transmitted skb's */ + if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) { + lp->media = TP; /* On chip auto negotiation is broken */ + } else if (lp->autosense == TP) { + lp->media = TP; + } else if (lp->autosense == BNC) { + lp->media = BNC; + } else if (lp->autosense == AUI) { + lp->media = AUI; + } else { + lp->media = NC; + } + lp->local_state = 0; + next_tick = dc21041_autoconf(dev); + break; + + case TP_NW: + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */ + outl(omr | OMR_FDX, DE4X5_OMR); + } + irqs = STS_LNF | STS_LNP; + irq_mask = IMR_LFM | IMR_LPM; + sts = test_media(dev, irqs, irq_mask, 0xef01, 0xffff, 0x0008, 2400); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (sts & STS_LNP) { + lp->media = ANS; + } else { + lp->media = AUI; + } + next_tick = dc21041_autoconf(dev); + } + break; + + case ANS: + if (!lp->tx_enable) { + irqs = STS_LNP; + irq_mask = IMR_LPM; + sts = test_ans(dev, irqs, irq_mask, 3000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (!(sts & STS_LNP) && (lp->autosense == AUTO)) { + lp->media = TP; + next_tick = dc21041_autoconf(dev); + } else { + lp->local_state = 1; + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = ANS_SUSPECT; + next_tick = 3000; + } + break; + + case ANS_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf); + break; + + case TP: + if (!lp->tx_enable) { + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for TP */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = STS_LNF | STS_LNP; + irq_mask = IMR_LFM | IMR_LPM; + sts = test_media(dev,irqs, irq_mask, 0xef01, 0xff3f, 0x0008, 2400); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (!(sts & STS_LNP) && (lp->autosense == AUTO)) { + if (inl(DE4X5_SISR) & SISR_NRA) { + lp->media = AUI; /* Non selected port activity */ + } else { + lp->media = BNC; + } + next_tick = dc21041_autoconf(dev); + } else { + lp->local_state = 1; + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = TP_SUSPECT; + next_tick = 3000; + } + break; + + case TP_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf); + break; + + case AUI: + if (!lp->tx_enable) { + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = 0; + irq_mask = 0; + sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x000e, 1000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) { + lp->media = BNC; + next_tick = dc21041_autoconf(dev); + } else { + lp->local_state = 1; + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = AUI_SUSPECT; + next_tick = 3000; + } + break; + + case AUI_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf); + break; + + case BNC: + switch (lp->local_state) { + case 0: + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = 0; + irq_mask = 0; + sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x0006, 1000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + lp->local_state++; /* Ensure media connected */ + next_tick = dc21041_autoconf(dev); + } + break; + + case 1: + if (!lp->tx_enable) { + if ((sts = ping_media(dev, 3000)) < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (sts) { + lp->local_state = 0; + lp->media = NC; + } else { + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = BNC_SUSPECT; + next_tick = 3000; + } + break; + } + break; + + case BNC_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf); + break; + + case NC: + omr = inl(DE4X5_OMR); /* Set up full duplex for the autonegotiate */ + outl(omr | OMR_FDX, DE4X5_OMR); + reset_init_sia(dev, 0xef01, 0xffff, 0x0008);/* Initialise the SIA */ + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tx_enable = false; + break; + } + + return next_tick; +} + +/* +** Some autonegotiation chips are broken in that they do not return the +** acknowledge bit (anlpa & MII_ANLPA_ACK) in the link partner advertisement +** register, except at the first power up negotiation. +*/ +static int +dc21140m_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int ana, anlpa, cap, cr, slnk, sr; + int next_tick = DE4X5_AUTOSENSE_MS; + u_long imr, omr, iobase = dev->base_addr; + + switch(lp->media) { + case INIT: + if (lp->timeout < 0) { + DISABLE_IRQs; + lp->tx_enable = false; + lp->linkOK = 0; + de4x5_save_skbs(dev); /* Save non transmitted skb's */ + } + if ((next_tick = de4x5_reset_phy(dev)) < 0) { + next_tick &= ~TIMER_CB; + } else { + if (lp->useSROM) { + if (srom_map_media(dev) < 0) { + lp->tcount++; + return next_tick; + } + srom_exec(dev, lp->phy[lp->active].gep); + if (lp->infoblock_media == ANS) { + ana = lp->phy[lp->active].ana | MII_ANA_CSMA; + mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + } + } else { + lp->tmp = MII_SR_ASSC; /* Fake out the MII speed set */ + SET_10Mb; + if (lp->autosense == _100Mb) { + lp->media = _100Mb; + } else if (lp->autosense == _10Mb) { + lp->media = _10Mb; + } else if ((lp->autosense == AUTO) && + ((sr=is_anc_capable(dev)) & MII_SR_ANC)) { + ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA); + ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM); + mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + lp->media = ANS; + } else if (lp->autosense == AUTO) { + lp->media = SPD_DET; + } else if (is_spd_100(dev) && is_100_up(dev)) { + lp->media = _100Mb; + } else { + lp->media = NC; + } + } + lp->local_state = 0; + next_tick = dc21140m_autoconf(dev); + } + break; + + case ANS: + switch (lp->local_state) { + case 0: + if (lp->timeout < 0) { + mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); + } + cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500); + if (cr < 0) { + next_tick = cr & ~TIMER_CB; + } else { + if (cr) { + lp->local_state = 0; + lp->media = SPD_DET; + } else { + lp->local_state++; + } + next_tick = dc21140m_autoconf(dev); + } + break; + + case 1: + if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000)) < 0) { + next_tick = sr & ~TIMER_CB; + } else { + lp->media = SPD_DET; + lp->local_state = 0; + if (sr) { /* Success! */ + lp->tmp = MII_SR_ASSC; + anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII); + ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + if (!(anlpa & MII_ANLPA_RF) && + (cap = anlpa & MII_ANLPA_TAF & ana)) { + if (cap & MII_ANA_100M) { + lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0; + lp->media = _100Mb; + } else if (cap & MII_ANA_10M) { + lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0; + + lp->media = _10Mb; + } + } + } /* Auto Negotiation failed to finish */ + next_tick = dc21140m_autoconf(dev); + } /* Auto Negotiation failed to start */ + break; + } + break; + + case SPD_DET: /* Choose 10Mb/s or 100Mb/s */ + if (lp->timeout < 0) { + lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS : + (~gep_rd(dev) & GEP_LNP)); + SET_100Mb_PDET; + } + if ((slnk = test_for_100Mb(dev, 6500)) < 0) { + next_tick = slnk & ~TIMER_CB; + } else { + if (is_spd_100(dev) && is_100_up(dev)) { + lp->media = _100Mb; + } else if ((!is_spd_100(dev) && (is_10_up(dev) & lp->tmp))) { + lp->media = _10Mb; + } else { + lp->media = NC; + } + next_tick = dc21140m_autoconf(dev); + } + break; + + case _100Mb: /* Set 100Mb/s */ + next_tick = 3000; + if (!lp->tx_enable) { + SET_100Mb; + de4x5_init_connection(dev); + } else { + if (!lp->linkOK && (lp->autosense == AUTO)) { + if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) { + lp->media = INIT; + lp->tcount++; + next_tick = DE4X5_AUTOSENSE_MS; + } + } + } + break; + + case BNC: + case AUI: + case _10Mb: /* Set 10Mb/s */ + next_tick = 3000; + if (!lp->tx_enable) { + SET_10Mb; + de4x5_init_connection(dev); + } else { + if (!lp->linkOK && (lp->autosense == AUTO)) { + if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) { + lp->media = INIT; + lp->tcount++; + next_tick = DE4X5_AUTOSENSE_MS; + } + } + } + break; + + case NC: + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tx_enable = false; + break; + } + + return next_tick; +} + +/* +** This routine may be merged into dc21140m_autoconf() sometime as I'm +** changing how I figure out the media - but trying to keep it backwards +** compatible with the de500-xa and de500-aa. +** Whether it's BNC, AUI, SYM or MII is sorted out in the infoblock +** functions and set during de4x5_mac_port() and/or de4x5_reset_phy(). +** This routine just has to figure out whether 10Mb/s or 100Mb/s is +** active. +** When autonegotiation is working, the ANS part searches the SROM for +** the highest common speed (TP) link that both can run and if that can +** be full duplex. That infoblock is executed and then the link speed set. +** +** Only _10Mb and _100Mb are tested here. +*/ +static int +dc2114x_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 cr, anlpa, ana, cap, irqs, irq_mask, imr, omr, slnk, sr, sts; + int next_tick = DE4X5_AUTOSENSE_MS; + + switch (lp->media) { + case INIT: + if (lp->timeout < 0) { + DISABLE_IRQs; + lp->tx_enable = false; + lp->linkOK = 0; + lp->timeout = -1; + de4x5_save_skbs(dev); /* Save non transmitted skb's */ + if (lp->params.autosense & ~AUTO) { + srom_map_media(dev); /* Fixed media requested */ + if (lp->media != lp->params.autosense) { + lp->tcount++; + lp->media = INIT; + return next_tick; + } + lp->media = INIT; + } + } + if ((next_tick = de4x5_reset_phy(dev)) < 0) { + next_tick &= ~TIMER_CB; + } else { + if (lp->autosense == _100Mb) { + lp->media = _100Mb; + } else if (lp->autosense == _10Mb) { + lp->media = _10Mb; + } else if (lp->autosense == TP) { + lp->media = TP; + } else if (lp->autosense == BNC) { + lp->media = BNC; + } else if (lp->autosense == AUI) { + lp->media = AUI; + } else { + lp->media = SPD_DET; + if ((lp->infoblock_media == ANS) && + ((sr=is_anc_capable(dev)) & MII_SR_ANC)) { + ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA); + ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM); + mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + lp->media = ANS; + } + } + lp->local_state = 0; + next_tick = dc2114x_autoconf(dev); + } + break; + + case ANS: + switch (lp->local_state) { + case 0: + if (lp->timeout < 0) { + mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); + } + cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500); + if (cr < 0) { + next_tick = cr & ~TIMER_CB; + } else { + if (cr) { + lp->local_state = 0; + lp->media = SPD_DET; + } else { + lp->local_state++; + } + next_tick = dc2114x_autoconf(dev); + } + break; + + case 1: + sr = test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000); + if (sr < 0) { + next_tick = sr & ~TIMER_CB; + } else { + lp->media = SPD_DET; + lp->local_state = 0; + if (sr) { /* Success! */ + lp->tmp = MII_SR_ASSC; + anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII); + ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + if (!(anlpa & MII_ANLPA_RF) && + (cap = anlpa & MII_ANLPA_TAF & ana)) { + if (cap & MII_ANA_100M) { + lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0; + lp->media = _100Mb; + } else if (cap & MII_ANA_10M) { + lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0; + lp->media = _10Mb; + } + } + } /* Auto Negotiation failed to finish */ + next_tick = dc2114x_autoconf(dev); + } /* Auto Negotiation failed to start */ + break; + } + break; + + case AUI: + if (!lp->tx_enable) { + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = 0; + irq_mask = 0; + sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) { + lp->media = BNC; + next_tick = dc2114x_autoconf(dev); + } else { + lp->local_state = 1; + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = AUI_SUSPECT; + next_tick = 3000; + } + break; + + case AUI_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf); + break; + + case BNC: + switch (lp->local_state) { + case 0: + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = 0; + irq_mask = 0; + sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + lp->local_state++; /* Ensure media connected */ + next_tick = dc2114x_autoconf(dev); + } + break; + + case 1: + if (!lp->tx_enable) { + if ((sts = ping_media(dev, 3000)) < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (sts) { + lp->local_state = 0; + lp->tcount++; + lp->media = INIT; + } else { + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = BNC_SUSPECT; + next_tick = 3000; + } + break; + } + break; + + case BNC_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf); + break; + + case SPD_DET: /* Choose 10Mb/s or 100Mb/s */ + if (srom_map_media(dev) < 0) { + lp->tcount++; + lp->media = INIT; + return next_tick; + } + if (lp->media == _100Mb) { + if ((slnk = test_for_100Mb(dev, 6500)) < 0) { + lp->media = SPD_DET; + return slnk & ~TIMER_CB; + } + } else { + if (wait_for_link(dev) < 0) { + lp->media = SPD_DET; + return PDET_LINK_WAIT; + } + } + if (lp->media == ANS) { /* Do MII parallel detection */ + if (is_spd_100(dev)) { + lp->media = _100Mb; + } else { + lp->media = _10Mb; + } + next_tick = dc2114x_autoconf(dev); + } else if (((lp->media == _100Mb) && is_100_up(dev)) || + (((lp->media == _10Mb) || (lp->media == TP) || + (lp->media == BNC) || (lp->media == AUI)) && + is_10_up(dev))) { + next_tick = dc2114x_autoconf(dev); + } else { + lp->tcount++; + lp->media = INIT; + } + break; + + case _10Mb: + next_tick = 3000; + if (!lp->tx_enable) { + SET_10Mb; + de4x5_init_connection(dev); + } else { + if (!lp->linkOK && (lp->autosense == AUTO)) { + if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) { + lp->media = INIT; + lp->tcount++; + next_tick = DE4X5_AUTOSENSE_MS; + } + } + } + break; + + case _100Mb: + next_tick = 3000; + if (!lp->tx_enable) { + SET_100Mb; + de4x5_init_connection(dev); + } else { + if (!lp->linkOK && (lp->autosense == AUTO)) { + if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) { + lp->media = INIT; + lp->tcount++; + next_tick = DE4X5_AUTOSENSE_MS; + } + } + } + break; + + default: + lp->tcount++; +printk("Huh?: media:%02x\n", lp->media); + lp->media = INIT; + break; + } + + return next_tick; +} + +static int +srom_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + return lp->infoleaf_fn(dev); +} + +/* +** This mapping keeps the original media codes and FDX flag unchanged. +** While it isn't strictly necessary, it helps me for the moment... +** The early return avoids a media state / SROM media space clash. +*/ +static int +srom_map_media(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + lp->fdx = false; + if (lp->infoblock_media == lp->media) + return 0; + + switch(lp->infoblock_media) { + case SROM_10BASETF: + if (!lp->params.fdx) return -1; + lp->fdx = true; + case SROM_10BASET: + if (lp->params.fdx && !lp->fdx) return -1; + if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) { + lp->media = _10Mb; + } else { + lp->media = TP; + } + break; + + case SROM_10BASE2: + lp->media = BNC; + break; + + case SROM_10BASE5: + lp->media = AUI; + break; + + case SROM_100BASETF: + if (!lp->params.fdx) return -1; + lp->fdx = true; + case SROM_100BASET: + if (lp->params.fdx && !lp->fdx) return -1; + lp->media = _100Mb; + break; + + case SROM_100BASET4: + lp->media = _100Mb; + break; + + case SROM_100BASEFF: + if (!lp->params.fdx) return -1; + lp->fdx = true; + case SROM_100BASEF: + if (lp->params.fdx && !lp->fdx) return -1; + lp->media = _100Mb; + break; + + case ANS: + lp->media = ANS; + lp->fdx = lp->params.fdx; + break; + + default: + printk("%s: Bad media code [%d] detected in SROM!\n", dev->name, + lp->infoblock_media); + return -1; + break; + } + + return 0; +} + +static void +de4x5_init_connection(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_long flags = 0; + + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; /* Stop scrolling media messages */ + } + + spin_lock_irqsave(&lp->lock, flags); + de4x5_rst_desc_ring(dev); + de4x5_setup_intr(dev); + lp->tx_enable = true; + spin_unlock_irqrestore(&lp->lock, flags); + outl(POLL_DEMAND, DE4X5_TPD); + + netif_wake_queue(dev); +} + +/* +** General PHY reset function. Some MII devices don't reset correctly +** since their MII address pins can float at voltages that are dependent +** on the signal pin use. Do a double reset to ensure a reset. +*/ +static int +de4x5_reset_phy(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int next_tick = 0; + + if ((lp->useSROM) || (lp->phy[lp->active].id)) { + if (lp->timeout < 0) { + if (lp->useSROM) { + if (lp->phy[lp->active].rst) { + srom_exec(dev, lp->phy[lp->active].rst); + srom_exec(dev, lp->phy[lp->active].rst); + } else if (lp->rst) { /* Type 5 infoblock reset */ + srom_exec(dev, lp->rst); + srom_exec(dev, lp->rst); + } + } else { + PHY_HARD_RESET; + } + if (lp->useMII) { + mii_wr(MII_CR_RST, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); + } + } + if (lp->useMII) { + next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, false, 500); + } + } else if (lp->chipset == DC21140) { + PHY_HARD_RESET; + } + + return next_tick; +} + +static int +test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 sts, csr12; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + if (!lp->useSROM) { /* Already done if by SROM, else dc2104[01] */ + reset_init_sia(dev, csr13, csr14, csr15); + } + + /* set up the interrupt mask */ + outl(irq_mask, DE4X5_IMR); + + /* clear all pending interrupts */ + sts = inl(DE4X5_STS); + outl(sts, DE4X5_STS); + + /* clear csr12 NRA and SRA bits */ + if ((lp->chipset == DC21041) || lp->useSROM) { + csr12 = inl(DE4X5_SISR); + outl(csr12, DE4X5_SISR); + } + } + + sts = inl(DE4X5_STS) & ~TIMER_CB; + + if (!(sts & irqs) && --lp->timeout) { + sts = 100 | TIMER_CB; + } else { + lp->timeout = -1; + } + + return sts; +} + +static int +test_tp(struct net_device *dev, s32 msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int sisr; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + } + + sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR); + + if (sisr && --lp->timeout) { + sisr = 100 | TIMER_CB; + } else { + lp->timeout = -1; + } + + return sisr; +} + +/* +** Samples the 100Mb Link State Signal. The sample interval is important +** because too fast a rate can give erroneous results and confuse the +** speed sense algorithm. +*/ +#define SAMPLE_INTERVAL 500 /* ms */ +#define SAMPLE_DELAY 2000 /* ms */ +static int +test_for_100Mb(struct net_device *dev, int msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + int gep = 0, ret = ((lp->chipset & ~0x00ff)==DC2114x? -1 :GEP_SLNK); + + if (lp->timeout < 0) { + if ((msec/SAMPLE_INTERVAL) <= 0) return 0; + if (msec > SAMPLE_DELAY) { + lp->timeout = (msec - SAMPLE_DELAY)/SAMPLE_INTERVAL; + gep = SAMPLE_DELAY | TIMER_CB; + return gep; + } else { + lp->timeout = msec/SAMPLE_INTERVAL; + } + } + + if (lp->phy[lp->active].id || lp->useSROM) { + gep = is_100_up(dev) | is_spd_100(dev); + } else { + gep = (~gep_rd(dev) & (GEP_SLNK | GEP_LNP)); + } + if (!(gep & ret) && --lp->timeout) { + gep = SAMPLE_INTERVAL | TIMER_CB; + } else { + lp->timeout = -1; + } + + return gep; +} + +static int +wait_for_link(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + if (lp->timeout < 0) { + lp->timeout = 1; + } + + if (lp->timeout--) { + return TIMER_CB; + } else { + lp->timeout = -1; + } + + return 0; +} + +/* +** +** +*/ +static int +test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + int test; + u_long iobase = dev->base_addr; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + } + + reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask; + test = (reg ^ (pol ? ~0 : 0)) & mask; + + if (test && --lp->timeout) { + reg = 100 | TIMER_CB; + } else { + lp->timeout = -1; + } + + return reg; +} + +static int +is_spd_100(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int spd; + + if (lp->useMII) { + spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII); + spd = ~(spd ^ lp->phy[lp->active].spd.value); + spd &= lp->phy[lp->active].spd.mask; + } else if (!lp->useSROM) { /* de500-xa */ + spd = ((~gep_rd(dev)) & GEP_SLNK); + } else { + if ((lp->ibn == 2) || !lp->asBitValid) + return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0; + + spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) | + (lp->linkOK & ~lp->asBitValid); + } + + return spd; +} + +static int +is_100_up(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->useMII) { + /* Double read for sticky bits & temporary drops */ + mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII); + return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS; + } else if (!lp->useSROM) { /* de500-xa */ + return (~gep_rd(dev)) & GEP_SLNK; + } else { + if ((lp->ibn == 2) || !lp->asBitValid) + return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0; + + return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) | + (lp->linkOK & ~lp->asBitValid); + } +} + +static int +is_10_up(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->useMII) { + /* Double read for sticky bits & temporary drops */ + mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII); + return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS; + } else if (!lp->useSROM) { /* de500-xa */ + return (~gep_rd(dev)) & GEP_LNP; + } else { + if ((lp->ibn == 2) || !lp->asBitValid) + return ((lp->chipset & ~0x00ff) == DC2114x) ? + (~inl(DE4X5_SISR)&SISR_LS10): + 0; + + return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) | + (lp->linkOK & ~lp->asBitValid); + } +} + +static int +is_anc_capable(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) { + return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII); + } else if ((lp->chipset & ~0x00ff) == DC2114x) { + return (inl(DE4X5_SISR) & SISR_LPN) >> 12; + } else { + return 0; + } +} + +/* +** Send a packet onto the media and watch for send errors that indicate the +** media is bad or unconnected. +*/ +static int +ping_media(struct net_device *dev, int msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int sisr; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + + lp->tmp = lp->tx_new; /* Remember the ring position */ + load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1); + lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; + outl(POLL_DEMAND, DE4X5_TPD); + } + + sisr = inl(DE4X5_SISR); + + if ((!(sisr & SISR_NCR)) && + ((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) && + (--lp->timeout)) { + sisr = 100 | TIMER_CB; + } else { + if ((!(sisr & SISR_NCR)) && + !(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) && + lp->timeout) { + sisr = 0; + } else { + sisr = 1; + } + lp->timeout = -1; + } + + return sisr; +} + +/* +** This function does 2 things: on Intels it kmalloc's another buffer to +** replace the one about to be passed up. On Alpha's it kmallocs a buffer +** into which the packet is copied. +*/ +static struct sk_buff * +de4x5_alloc_rx_buff(struct net_device *dev, int index, int len) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct sk_buff *p; + +#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY) + struct sk_buff *ret; + u_long i=0, tmp; + + p = dev_alloc_skb(IEEE802_3_SZ + DE4X5_ALIGN + 2); + if (!p) return NULL; + + tmp = virt_to_bus(p->data); + i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp; + skb_reserve(p, i); + lp->rx_ring[index].buf = cpu_to_le32(tmp + i); + + ret = lp->rx_skb[index]; + lp->rx_skb[index] = p; + + if ((u_long) ret > 1) { + skb_put(ret, len); + } + + return ret; + +#else + if (lp->state != OPEN) return (struct sk_buff *)1; /* Fake out the open */ + + p = dev_alloc_skb(len + 2); + if (!p) return NULL; + + skb_reserve(p, 2); /* Align */ + if (index < lp->rx_old) { /* Wrapped buffer */ + short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ; + memcpy(skb_put(p,tlen),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,tlen); + memcpy(skb_put(p,len-tlen),lp->rx_bufs,len-tlen); + } else { /* Linear buffer */ + memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len); + } + + return p; +#endif +} + +static void +de4x5_free_rx_buffs(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + + for (i=0; i<lp->rxRingSize; i++) { + if ((u_long) lp->rx_skb[i] > 1) { + dev_kfree_skb(lp->rx_skb[i]); + } + lp->rx_ring[i].status = 0; + lp->rx_skb[i] = (struct sk_buff *)1; /* Dummy entry */ + } +} + +static void +de4x5_free_tx_buffs(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + + for (i=0; i<lp->txRingSize; i++) { + if (lp->tx_skb[i]) + de4x5_free_tx_buff(lp, i); + lp->tx_ring[i].status = 0; + } + + /* Unload the locally queued packets */ + __skb_queue_purge(&lp->cache.queue); +} + +/* +** When a user pulls a connection, the DECchip can end up in a +** 'running - waiting for end of transmission' state. This means that we +** have to perform a chip soft reset to ensure that we can synchronize +** the hardware and software and make any media probes using a loopback +** packet meaningful. +*/ +static void +de4x5_save_skbs(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 omr; + + if (!lp->cache.save_cnt) { + STOP_DE4X5; + de4x5_tx(dev); /* Flush any sent skb's */ + de4x5_free_tx_buffs(dev); + de4x5_cache_state(dev, DE4X5_SAVE_STATE); + de4x5_sw_reset(dev); + de4x5_cache_state(dev, DE4X5_RESTORE_STATE); + lp->cache.save_cnt++; + START_DE4X5; + } +} + +static void +de4x5_rst_desc_ring(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i; + s32 omr; + + if (lp->cache.save_cnt) { + STOP_DE4X5; + outl(lp->dma_rings, DE4X5_RRBA); + outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), + DE4X5_TRBA); + + lp->rx_new = lp->rx_old = 0; + lp->tx_new = lp->tx_old = 0; + + for (i = 0; i < lp->rxRingSize; i++) { + lp->rx_ring[i].status = cpu_to_le32(R_OWN); + } + + for (i = 0; i < lp->txRingSize; i++) { + lp->tx_ring[i].status = cpu_to_le32(0); + } + + barrier(); + lp->cache.save_cnt--; + START_DE4X5; + } +} + +static void +de4x5_cache_state(struct net_device *dev, int flag) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + switch(flag) { + case DE4X5_SAVE_STATE: + lp->cache.csr0 = inl(DE4X5_BMR); + lp->cache.csr6 = (inl(DE4X5_OMR) & ~(OMR_ST | OMR_SR)); + lp->cache.csr7 = inl(DE4X5_IMR); + break; + + case DE4X5_RESTORE_STATE: + outl(lp->cache.csr0, DE4X5_BMR); + outl(lp->cache.csr6, DE4X5_OMR); + outl(lp->cache.csr7, DE4X5_IMR); + if (lp->chipset == DC21140) { + gep_wr(lp->cache.gepc, dev); + gep_wr(lp->cache.gep, dev); + } else { + reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, + lp->cache.csr15); + } + break; + } +} + +static void +de4x5_put_cache(struct net_device *dev, struct sk_buff *skb) +{ + struct de4x5_private *lp = netdev_priv(dev); + + __skb_queue_tail(&lp->cache.queue, skb); +} + +static void +de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb) +{ + struct de4x5_private *lp = netdev_priv(dev); + + __skb_queue_head(&lp->cache.queue, skb); +} + +static struct sk_buff * +de4x5_get_cache(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + return __skb_dequeue(&lp->cache.queue); +} + +/* +** Check the Auto Negotiation State. Return OK when a link pass interrupt +** is received and the auto-negotiation status is NWAY OK. +*/ +static int +test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 sts, ans; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + outl(irq_mask, DE4X5_IMR); + + /* clear all pending interrupts */ + sts = inl(DE4X5_STS); + outl(sts, DE4X5_STS); + } + + ans = inl(DE4X5_SISR) & SISR_ANS; + sts = inl(DE4X5_STS) & ~TIMER_CB; + + if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) { + sts = 100 | TIMER_CB; + } else { + lp->timeout = -1; + } + + return sts; +} + +static void +de4x5_setup_intr(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 imr, sts; + + if (inl(DE4X5_OMR) & OMR_SR) { /* Only unmask if TX/RX is enabled */ + imr = 0; + UNMASK_IRQs; + sts = inl(DE4X5_STS); /* Reset any pending (stale) interrupts */ + outl(sts, DE4X5_STS); + ENABLE_IRQs; + } +} + +/* +** +*/ +static void +reset_init_sia(struct net_device *dev, s32 csr13, s32 csr14, s32 csr15) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + RESET_SIA; + if (lp->useSROM) { + if (lp->ibn == 3) { + srom_exec(dev, lp->phy[lp->active].rst); + srom_exec(dev, lp->phy[lp->active].gep); + outl(1, DE4X5_SICR); + return; + } else { + csr15 = lp->cache.csr15; + csr14 = lp->cache.csr14; + csr13 = lp->cache.csr13; + outl(csr15 | lp->cache.gepc, DE4X5_SIGR); + outl(csr15 | lp->cache.gep, DE4X5_SIGR); + } + } else { + outl(csr15, DE4X5_SIGR); + } + outl(csr14, DE4X5_STRR); + outl(csr13, DE4X5_SICR); + + mdelay(10); +} + +/* +** Create a loopback ethernet packet +*/ +static void +create_packet(struct net_device *dev, char *frame, int len) +{ + int i; + char *buf = frame; + + for (i=0; i<ETH_ALEN; i++) { /* Use this source address */ + *buf++ = dev->dev_addr[i]; + } + for (i=0; i<ETH_ALEN; i++) { /* Use this destination address */ + *buf++ = dev->dev_addr[i]; + } + + *buf++ = 0; /* Packet length (2 bytes) */ + *buf++ = 1; +} + +/* +** Look for a particular board name in the EISA configuration space +*/ +static int +EISA_signature(char *name, struct device *device) +{ + int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures); + struct eisa_device *edev; + + *name = '\0'; + edev = to_eisa_device (device); + i = edev->id.driver_data; + + if (i >= 0 && i < siglen) { + strcpy (name, de4x5_signatures[i]); + status = 1; + } + + return status; /* return the device name string */ +} + +/* +** Look for a particular board name in the PCI configuration space +*/ +static int +PCI_signature(char *name, struct de4x5_private *lp) +{ + int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures); + + if (lp->chipset == DC21040) { + strcpy(name, "DE434/5"); + return status; + } else { /* Search for a DEC name in the SROM */ + int tmp = *((char *)&lp->srom + 19) * 3; + strncpy(name, (char *)&lp->srom + 26 + tmp, 8); + } + name[8] = '\0'; + for (i=0; i<siglen; i++) { + if (strstr(name,de4x5_signatures[i])!=NULL) break; + } + if (i == siglen) { + if (dec_only) { + *name = '\0'; + } else { /* Use chip name to avoid confusion */ + strcpy(name, (((lp->chipset == DC21040) ? "DC21040" : + ((lp->chipset == DC21041) ? "DC21041" : + ((lp->chipset == DC21140) ? "DC21140" : + ((lp->chipset == DC21142) ? "DC21142" : + ((lp->chipset == DC21143) ? "DC21143" : "UNKNOWN" + ))))))); + } + if (lp->chipset != DC21041) { + lp->useSROM = true; /* card is not recognisably DEC */ + } + } else if ((lp->chipset & ~0x00ff) == DC2114x) { + lp->useSROM = true; + } + + return status; +} + +/* +** Set up the Ethernet PROM counter to the start of the Ethernet address on +** the DC21040, else read the SROM for the other chips. +** The SROM may not be present in a multi-MAC card, so first read the +** MAC address and check for a bad address. If there is a bad one then exit +** immediately with the prior srom contents intact (the h/w address will +** be fixed up later). +*/ +static void +DevicePresent(struct net_device *dev, u_long aprom_addr) +{ + int i, j=0; + struct de4x5_private *lp = netdev_priv(dev); + + if (lp->chipset == DC21040) { + if (lp->bus == EISA) { + enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */ + } else { + outl(0, aprom_addr); /* Reset Ethernet Address ROM Pointer */ + } + } else { /* Read new srom */ + u_short tmp; + __le16 *p = (__le16 *)((char *)&lp->srom + SROM_HWADD); + for (i=0; i<(ETH_ALEN>>1); i++) { + tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i); + j += tmp; /* for check for 0:0:0:0:0:0 or ff:ff:ff:ff:ff:ff */ + *p = cpu_to_le16(tmp); + } + if (j == 0 || j == 3 * 0xffff) { + /* could get 0 only from all-0 and 3 * 0xffff only from all-1 */ + return; + } + + p = (__le16 *)&lp->srom; + for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) { + tmp = srom_rd(aprom_addr, i); + *p++ = cpu_to_le16(tmp); + } + de4x5_dbg_srom((struct de4x5_srom *)&lp->srom); + } +} + +/* +** Since the write on the Enet PROM register doesn't seem to reset the PROM +** pointer correctly (at least on my DE425 EISA card), this routine should do +** it...from depca.c. +*/ +static void +enet_addr_rst(u_long aprom_addr) +{ + union { + struct { + u32 a; + u32 b; + } llsig; + char Sig[sizeof(u32) << 1]; + } dev; + short sigLength=0; + s8 data; + int i, j; + + dev.llsig.a = ETH_PROM_SIG; + dev.llsig.b = ETH_PROM_SIG; + sigLength = sizeof(u32) << 1; + + for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) { + data = inb(aprom_addr); + if (dev.Sig[j] == data) { /* track signature */ + j++; + } else { /* lost signature; begin search again */ + if (data == dev.Sig[0]) { /* rare case.... */ + j=1; + } else { + j=0; + } + } + } +} + +/* +** For the bad status case and no SROM, then add one to the previous +** address. However, need to add one backwards in case we have 0xff +** as one or more of the bytes. Only the last 3 bytes should be checked +** as the first three are invariant - assigned to an organisation. +*/ +static int +get_hw_addr(struct net_device *dev) +{ + u_long iobase = dev->base_addr; + int broken, i, k, tmp, status = 0; + u_short j,chksum; + struct de4x5_private *lp = netdev_priv(dev); + + broken = de4x5_bad_srom(lp); + + for (i=0,k=0,j=0;j<3;j++) { + k <<= 1; + if (k > 0xffff) k-=0xffff; + + if (lp->bus == PCI) { + if (lp->chipset == DC21040) { + while ((tmp = inl(DE4X5_APROM)) < 0); + k += (u_char) tmp; + dev->dev_addr[i++] = (u_char) tmp; + while ((tmp = inl(DE4X5_APROM)) < 0); + k += (u_short) (tmp << 8); + dev->dev_addr[i++] = (u_char) tmp; + } else if (!broken) { + dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++; + dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++; + } else if ((broken == SMC) || (broken == ACCTON)) { + dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++; + dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++; + } + } else { + k += (u_char) (tmp = inb(EISA_APROM)); + dev->dev_addr[i++] = (u_char) tmp; + k += (u_short) ((tmp = inb(EISA_APROM)) << 8); + dev->dev_addr[i++] = (u_char) tmp; + } + + if (k > 0xffff) k-=0xffff; + } + if (k == 0xffff) k=0; + + if (lp->bus == PCI) { + if (lp->chipset == DC21040) { + while ((tmp = inl(DE4X5_APROM)) < 0); + chksum = (u_char) tmp; + while ((tmp = inl(DE4X5_APROM)) < 0); + chksum |= (u_short) (tmp << 8); + if ((k != chksum) && (dec_only)) status = -1; + } + } else { + chksum = (u_char) inb(EISA_APROM); + chksum |= (u_short) (inb(EISA_APROM) << 8); + if ((k != chksum) && (dec_only)) status = -1; + } + + /* If possible, try to fix a broken card - SMC only so far */ + srom_repair(dev, broken); + +#ifdef CONFIG_PPC_PMAC + /* + ** If the address starts with 00 a0, we have to bit-reverse + ** each byte of the address. + */ + if ( machine_is(powermac) && + (dev->dev_addr[0] == 0) && + (dev->dev_addr[1] == 0xa0) ) + { + for (i = 0; i < ETH_ALEN; ++i) + { + int x = dev->dev_addr[i]; + x = ((x & 0xf) << 4) + ((x & 0xf0) >> 4); + x = ((x & 0x33) << 2) + ((x & 0xcc) >> 2); + dev->dev_addr[i] = ((x & 0x55) << 1) + ((x & 0xaa) >> 1); + } + } +#endif /* CONFIG_PPC_PMAC */ + + /* Test for a bad enet address */ + status = test_bad_enet(dev, status); + + return status; +} + +/* +** Test for enet addresses in the first 32 bytes. The built-in strncmp +** didn't seem to work here...? +*/ +static int +de4x5_bad_srom(struct de4x5_private *lp) +{ + int i, status = 0; + + for (i = 0; i < ARRAY_SIZE(enet_det); i++) { + if (!de4x5_strncmp((char *)&lp->srom, (char *)&enet_det[i], 3) && + !de4x5_strncmp((char *)&lp->srom+0x10, (char *)&enet_det[i], 3)) { + if (i == 0) { + status = SMC; + } else if (i == 1) { + status = ACCTON; + } + break; + } + } + + return status; +} + +static int +de4x5_strncmp(char *a, char *b, int n) +{ + int ret=0; + + for (;n && !ret; n--) { + ret = *a++ - *b++; + } + + return ret; +} + +static void +srom_repair(struct net_device *dev, int card) +{ + struct de4x5_private *lp = netdev_priv(dev); + + switch(card) { + case SMC: + memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom)); + memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN); + memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100); + lp->useSROM = true; + break; + } +} + +/* +** Assume that the irq's do not follow the PCI spec - this is seems +** to be true so far (2 for 2). +*/ +static int +test_bad_enet(struct net_device *dev, int status) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i, tmp; + + for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i]; + if ((tmp == 0) || (tmp == 0x5fa)) { + if ((lp->chipset == last.chipset) && + (lp->bus_num == last.bus) && (lp->bus_num > 0)) { + for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i]; + for (i=ETH_ALEN-1; i>2; --i) { + dev->dev_addr[i] += 1; + if (dev->dev_addr[i] != 0) break; + } + for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i]; + if (!an_exception(lp)) { + dev->irq = last.irq; + } + + status = 0; + } + } else if (!status) { + last.chipset = lp->chipset; + last.bus = lp->bus_num; + last.irq = dev->irq; + for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i]; + } + + return status; +} + +/* +** List of board exceptions with correctly wired IRQs +*/ +static int +an_exception(struct de4x5_private *lp) +{ + if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) && + (*(u_short *)lp->srom.sub_system_id == 0x95e0)) { + return -1; + } + + return 0; +} + +/* +** SROM Read +*/ +static short +srom_rd(u_long addr, u_char offset) +{ + sendto_srom(SROM_RD | SROM_SR, addr); + + srom_latch(SROM_RD | SROM_SR | DT_CS, addr); + srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr); + srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset); + + return srom_data(SROM_RD | SROM_SR | DT_CS, addr); +} + +static void +srom_latch(u_int command, u_long addr) +{ + sendto_srom(command, addr); + sendto_srom(command | DT_CLK, addr); + sendto_srom(command, addr); +} + +static void +srom_command(u_int command, u_long addr) +{ + srom_latch(command, addr); + srom_latch(command, addr); + srom_latch((command & 0x0000ff00) | DT_CS, addr); +} + +static void +srom_address(u_int command, u_long addr, u_char offset) +{ + int i, a; + + a = offset << 2; + for (i=0; i<6; i++, a <<= 1) { + srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr); + } + udelay(1); + + i = (getfrom_srom(addr) >> 3) & 0x01; +} + +static short +srom_data(u_int command, u_long addr) +{ + int i; + short word = 0; + s32 tmp; + + for (i=0; i<16; i++) { + sendto_srom(command | DT_CLK, addr); + tmp = getfrom_srom(addr); + sendto_srom(command, addr); + + word = (word << 1) | ((tmp >> 3) & 0x01); + } + + sendto_srom(command & 0x0000ff00, addr); + + return word; +} + +/* +static void +srom_busy(u_int command, u_long addr) +{ + sendto_srom((command & 0x0000ff00) | DT_CS, addr); + + while (!((getfrom_srom(addr) >> 3) & 0x01)) { + mdelay(1); + } + + sendto_srom(command & 0x0000ff00, addr); +} +*/ + +static void +sendto_srom(u_int command, u_long addr) +{ + outl(command, addr); + udelay(1); +} + +static int +getfrom_srom(u_long addr) +{ + s32 tmp; + + tmp = inl(addr); + udelay(1); + + return tmp; +} + +static int +srom_infoleaf_info(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i, count; + u_char *p; + + /* Find the infoleaf decoder function that matches this chipset */ + for (i=0; i<INFOLEAF_SIZE; i++) { + if (lp->chipset == infoleaf_array[i].chipset) break; + } + if (i == INFOLEAF_SIZE) { + lp->useSROM = false; + printk("%s: Cannot find correct chipset for SROM decoding!\n", + dev->name); + return -ENXIO; + } + + lp->infoleaf_fn = infoleaf_array[i].fn; + + /* Find the information offset that this function should use */ + count = *((u_char *)&lp->srom + 19); + p = (u_char *)&lp->srom + 26; + + if (count > 1) { + for (i=count; i; --i, p+=3) { + if (lp->device == *p) break; + } + if (i == 0) { + lp->useSROM = false; + printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n", + dev->name, lp->device); + return -ENXIO; + } + } + + lp->infoleaf_offset = get_unaligned_le16(p + 1); + + return 0; +} + +/* +** This routine loads any type 1 or 3 MII info into the mii device +** struct and executes any type 5 code to reset PHY devices for this +** controller. +** The info for the MII devices will be valid since the index used +** will follow the discovery process from MII address 1-31 then 0. +*/ +static void +srom_init(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; + u_char count; + + p+=2; + if (lp->chipset == DC21140) { + lp->cache.gepc = (*p++ | GEP_CTRL); + gep_wr(lp->cache.gepc, dev); + } + + /* Block count */ + count = *p++; + + /* Jump the infoblocks to find types */ + for (;count; --count) { + if (*p < 128) { + p += COMPACT_LEN; + } else if (*(p+1) == 5) { + type5_infoblock(dev, 1, p); + p += ((*p & BLOCK_LEN) + 1); + } else if (*(p+1) == 4) { + p += ((*p & BLOCK_LEN) + 1); + } else if (*(p+1) == 3) { + type3_infoblock(dev, 1, p); + p += ((*p & BLOCK_LEN) + 1); + } else if (*(p+1) == 2) { + p += ((*p & BLOCK_LEN) + 1); + } else if (*(p+1) == 1) { + type1_infoblock(dev, 1, p); + p += ((*p & BLOCK_LEN) + 1); + } else { + p += ((*p & BLOCK_LEN) + 1); + } + } +} + +/* +** A generic routine that writes GEP control, data and reset information +** to the GEP register (21140) or csr15 GEP portion (2114[23]). +*/ +static void +srom_exec(struct net_device *dev, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_char count = (p ? *p++ : 0); + u_short *w = (u_short *)p; + + if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return; + + if (lp->chipset != DC21140) RESET_SIA; + + while (count--) { + gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ? + *p++ : get_unaligned_le16(w++)), dev); + mdelay(2); /* 2ms per action */ + } + + if (lp->chipset != DC21140) { + outl(lp->cache.csr14, DE4X5_STRR); + outl(lp->cache.csr13, DE4X5_SICR); + } +} + +/* +** Basically this function is a NOP since it will never be called, +** unless I implement the DC21041 SROM functions. There's no need +** since the existing code will be satisfactory for all boards. +*/ +static int +dc21041_infoleaf(struct net_device *dev) +{ + return DE4X5_AUTOSENSE_MS; +} + +static int +dc21140_infoleaf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char count = 0; + u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; + int next_tick = DE4X5_AUTOSENSE_MS; + + /* Read the connection type */ + p+=2; + + /* GEP control */ + lp->cache.gepc = (*p++ | GEP_CTRL); + + /* Block count */ + count = *p++; + + /* Recursively figure out the info blocks */ + if (*p < 128) { + next_tick = dc_infoblock[COMPACT](dev, count, p); + } else { + next_tick = dc_infoblock[*(p+1)](dev, count, p); + } + + if (lp->tcount == count) { + lp->media = NC; + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tcount = 0; + lp->tx_enable = false; + } + + return next_tick & ~TIMER_CB; +} + +static int +dc21142_infoleaf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char count = 0; + u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; + int next_tick = DE4X5_AUTOSENSE_MS; + + /* Read the connection type */ + p+=2; + + /* Block count */ + count = *p++; + + /* Recursively figure out the info blocks */ + if (*p < 128) { + next_tick = dc_infoblock[COMPACT](dev, count, p); + } else { + next_tick = dc_infoblock[*(p+1)](dev, count, p); + } + + if (lp->tcount == count) { + lp->media = NC; + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tcount = 0; + lp->tx_enable = false; + } + + return next_tick & ~TIMER_CB; +} + +static int +dc21143_infoleaf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char count = 0; + u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; + int next_tick = DE4X5_AUTOSENSE_MS; + + /* Read the connection type */ + p+=2; + + /* Block count */ + count = *p++; + + /* Recursively figure out the info blocks */ + if (*p < 128) { + next_tick = dc_infoblock[COMPACT](dev, count, p); + } else { + next_tick = dc_infoblock[*(p+1)](dev, count, p); + } + if (lp->tcount == count) { + lp->media = NC; + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tcount = 0; + lp->tx_enable = false; + } + + return next_tick & ~TIMER_CB; +} + +/* +** The compact infoblock is only designed for DC21140[A] chips, so +** we'll reuse the dc21140m_autoconf function. Non MII media only. +*/ +static int +compact_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char flags, csr6; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+COMPACT_LEN) < 128) { + return dc_infoblock[COMPACT](dev, count, p+COMPACT_LEN); + } else { + return dc_infoblock[*(p+COMPACT_LEN+1)](dev, count, p+COMPACT_LEN); + } + } + + if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = COMPACT; + lp->active = 0; + gep_wr(lp->cache.gepc, dev); + lp->infoblock_media = (*p++) & COMPACT_MC; + lp->cache.gep = *p++; + csr6 = *p++; + flags = *p++; + + lp->asBitValid = (flags & 0x80) ? 0 : -1; + lp->defMedium = (flags & 0x40) ? -1 : 0; + lp->asBit = 1 << ((csr6 >> 1) & 0x07); + lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; + lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); + lp->useMII = false; + + de4x5_switch_mac_port(dev); + } + + return dc21140m_autoconf(dev); +} + +/* +** This block describes non MII media for the DC21140[A] only. +*/ +static int +type0_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char flags, csr6, len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 0; + lp->active = 0; + gep_wr(lp->cache.gepc, dev); + p+=2; + lp->infoblock_media = (*p++) & BLOCK0_MC; + lp->cache.gep = *p++; + csr6 = *p++; + flags = *p++; + + lp->asBitValid = (flags & 0x80) ? 0 : -1; + lp->defMedium = (flags & 0x40) ? -1 : 0; + lp->asBit = 1 << ((csr6 >> 1) & 0x07); + lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; + lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); + lp->useMII = false; + + de4x5_switch_mac_port(dev); + } + + return dc21140m_autoconf(dev); +} + +/* These functions are under construction! */ + +static int +type1_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + p += 2; + if (lp->state == INITIALISED) { + lp->ibn = 1; + lp->active = *p++; + lp->phy[lp->active].gep = (*p ? p : NULL); p += (*p + 1); + lp->phy[lp->active].rst = (*p ? p : NULL); p += (*p + 1); + lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; + lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; + lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; + lp->phy[lp->active].ttm = get_unaligned_le16(p); + return 0; + } else if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 1; + lp->active = *p; + lp->infoblock_csr6 = OMR_MII_100; + lp->useMII = true; + lp->infoblock_media = ANS; + + de4x5_switch_mac_port(dev); + } + + return dc21140m_autoconf(dev); +} + +static int +type2_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 2; + lp->active = 0; + p += 2; + lp->infoblock_media = (*p) & MEDIA_CODE; + + if ((*p++) & EXT_FIELD) { + lp->cache.csr13 = get_unaligned_le16(p); p += 2; + lp->cache.csr14 = get_unaligned_le16(p); p += 2; + lp->cache.csr15 = get_unaligned_le16(p); p += 2; + } else { + lp->cache.csr13 = CSR13; + lp->cache.csr14 = CSR14; + lp->cache.csr15 = CSR15; + } + lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2; + lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16); + lp->infoblock_csr6 = OMR_SIA; + lp->useMII = false; + + de4x5_switch_mac_port(dev); + } + + return dc2114x_autoconf(dev); +} + +static int +type3_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + p += 2; + if (lp->state == INITIALISED) { + lp->ibn = 3; + lp->active = *p++; + if (MOTO_SROM_BUG) lp->active = 0; + lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); + lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); + lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; + lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; + lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; + lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; + lp->phy[lp->active].mci = *p; + return 0; + } else if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 3; + lp->active = *p; + if (MOTO_SROM_BUG) lp->active = 0; + lp->infoblock_csr6 = OMR_MII_100; + lp->useMII = true; + lp->infoblock_media = ANS; + + de4x5_switch_mac_port(dev); + } + + return dc2114x_autoconf(dev); +} + +static int +type4_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char flags, csr6, len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 4; + lp->active = 0; + p+=2; + lp->infoblock_media = (*p++) & MEDIA_CODE; + lp->cache.csr13 = CSR13; /* Hard coded defaults */ + lp->cache.csr14 = CSR14; + lp->cache.csr15 = CSR15; + lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2; + lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16); p += 2; + csr6 = *p++; + flags = *p++; + + lp->asBitValid = (flags & 0x80) ? 0 : -1; + lp->defMedium = (flags & 0x40) ? -1 : 0; + lp->asBit = 1 << ((csr6 >> 1) & 0x07); + lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; + lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); + lp->useMII = false; + + de4x5_switch_mac_port(dev); + } + + return dc2114x_autoconf(dev); +} + +/* +** This block type provides information for resetting external devices +** (chips) through the General Purpose Register. +*/ +static int +type5_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + /* Must be initializing to run this code */ + if ((lp->state == INITIALISED) || (lp->media == INIT)) { + p+=2; + lp->rst = p; + srom_exec(dev, lp->rst); + } + + return DE4X5_AUTOSENSE_MS; +} + +/* +** MII Read/Write +*/ + +static int +mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr) +{ + mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */ + mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */ + mii_wdata(MII_STRD, 4, ioaddr); /* SFD and Read operation */ + mii_address(phyaddr, ioaddr); /* PHY address to be accessed */ + mii_address(phyreg, ioaddr); /* PHY Register to read */ + mii_ta(MII_STRD, ioaddr); /* Turn around time - 2 MDC */ + + return mii_rdata(ioaddr); /* Read data */ +} + +static void +mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr) +{ + mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */ + mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */ + mii_wdata(MII_STWR, 4, ioaddr); /* SFD and Write operation */ + mii_address(phyaddr, ioaddr); /* PHY address to be accessed */ + mii_address(phyreg, ioaddr); /* PHY Register to write */ + mii_ta(MII_STWR, ioaddr); /* Turn around time - 2 MDC */ + data = mii_swap(data, 16); /* Swap data bit ordering */ + mii_wdata(data, 16, ioaddr); /* Write data */ +} + +static int +mii_rdata(u_long ioaddr) +{ + int i; + s32 tmp = 0; + + for (i=0; i<16; i++) { + tmp <<= 1; + tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr); + } + + return tmp; +} + +static void +mii_wdata(int data, int len, u_long ioaddr) +{ + int i; + + for (i=0; i<len; i++) { + sendto_mii(MII_MWR | MII_WR, data, ioaddr); + data >>= 1; + } +} + +static void +mii_address(u_char addr, u_long ioaddr) +{ + int i; + + addr = mii_swap(addr, 5); + for (i=0; i<5; i++) { + sendto_mii(MII_MWR | MII_WR, addr, ioaddr); + addr >>= 1; + } +} + +static void +mii_ta(u_long rw, u_long ioaddr) +{ + if (rw == MII_STWR) { + sendto_mii(MII_MWR | MII_WR, 1, ioaddr); + sendto_mii(MII_MWR | MII_WR, 0, ioaddr); + } else { + getfrom_mii(MII_MRD | MII_RD, ioaddr); /* Tri-state MDIO */ + } +} + +static int +mii_swap(int data, int len) +{ + int i, tmp = 0; + + for (i=0; i<len; i++) { + tmp <<= 1; + tmp |= (data & 1); + data >>= 1; + } + + return tmp; +} + +static void +sendto_mii(u32 command, int data, u_long ioaddr) +{ + u32 j; + + j = (data & 1) << 17; + outl(command | j, ioaddr); + udelay(1); + outl(command | MII_MDC | j, ioaddr); + udelay(1); +} + +static int +getfrom_mii(u32 command, u_long ioaddr) +{ + outl(command, ioaddr); + udelay(1); + outl(command | MII_MDC, ioaddr); + udelay(1); + + return (inl(ioaddr) >> 19) & 1; +} + +/* +** Here's 3 ways to calculate the OUI from the ID registers. +*/ +static int +mii_get_oui(u_char phyaddr, u_long ioaddr) +{ +/* + union { + u_short reg; + u_char breg[2]; + } a; + int i, r2, r3, ret=0;*/ + int r2, r3; + + /* Read r2 and r3 */ + r2 = mii_rd(MII_ID0, phyaddr, ioaddr); + r3 = mii_rd(MII_ID1, phyaddr, ioaddr); + /* SEEQ and Cypress way * / + / * Shuffle r2 and r3 * / + a.reg=0; + r3 = ((r3>>10)|(r2<<6))&0x0ff; + r2 = ((r2>>2)&0x3fff); + + / * Bit reverse r3 * / + for (i=0;i<8;i++) { + ret<<=1; + ret |= (r3&1); + r3>>=1; + } + + / * Bit reverse r2 * / + for (i=0;i<16;i++) { + a.reg<<=1; + a.reg |= (r2&1); + r2>>=1; + } + + / * Swap r2 bytes * / + i=a.breg[0]; + a.breg[0]=a.breg[1]; + a.breg[1]=i; + + return (a.reg<<8)|ret; */ /* SEEQ and Cypress way */ +/* return (r2<<6)|(u_int)(r3>>10); */ /* NATIONAL and BROADCOM way */ + return r2; /* (I did it) My way */ +} + +/* +** The SROM spec forces us to search addresses [1-31 0]. Bummer. +*/ +static int +mii_get_phy(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, j, k, n, limit=ARRAY_SIZE(phy_info); + int id; + + lp->active = 0; + lp->useMII = true; + + /* Search the MII address space for possible PHY devices */ + for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) { + lp->phy[lp->active].addr = i; + if (i==0) n++; /* Count cycles */ + while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */ + id = mii_get_oui(i, DE4X5_MII); + if ((id == 0) || (id == 65535)) continue; /* Valid ID? */ + for (j=0; j<limit; j++) { /* Search PHY table */ + if (id != phy_info[j].id) continue; /* ID match? */ + for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++); + if (k < DE4X5_MAX_PHY) { + memcpy((char *)&lp->phy[k], + (char *)&phy_info[j], sizeof(struct phy_table)); + lp->phy[k].addr = i; + lp->mii_cnt++; + lp->active++; + } else { + goto purgatory; /* Stop the search */ + } + break; + } + if ((j == limit) && (i < DE4X5_MAX_MII)) { + for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++); + lp->phy[k].addr = i; + lp->phy[k].id = id; + lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */ + lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */ + lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */ + lp->mii_cnt++; + lp->active++; + printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name); + j = de4x5_debug; + de4x5_debug |= DEBUG_MII; + de4x5_dbg_mii(dev, k); + de4x5_debug = j; + printk("\n"); + } + } + purgatory: + lp->active = 0; + if (lp->phy[0].id) { /* Reset the PHY devices */ + for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/ + mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII); + while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST); + + de4x5_dbg_mii(dev, k); + } + } + if (!lp->mii_cnt) lp->useMII = false; + + return lp->mii_cnt; +} + +static char * +build_setup_frame(struct net_device *dev, int mode) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + char *pa = lp->setup_frame; + + /* Initialise the setup frame */ + if (mode == ALL) { + memset(lp->setup_frame, 0, SETUP_FRAME_LEN); + } + + if (lp->setup_f == HASH_PERF) { + for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) { + *(pa + i) = dev->dev_addr[i]; /* Host address */ + if (i & 0x01) pa += 2; + } + *(lp->setup_frame + (HASH_TABLE_LEN >> 3) - 3) = 0x80; + } else { + for (i=0; i<ETH_ALEN; i++) { /* Host address */ + *(pa + (i&1)) = dev->dev_addr[i]; + if (i & 0x01) pa += 4; + } + for (i=0; i<ETH_ALEN; i++) { /* Broadcast address */ + *(pa + (i&1)) = (char) 0xff; + if (i & 0x01) pa += 4; + } + } + + return pa; /* Points to the next entry */ +} + +static void +disable_ast(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + del_timer_sync(&lp->timer); +} + +static long +de4x5_switch_mac_port(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 omr; + + STOP_DE4X5; + + /* Assert the OMR_PS bit in CSR6 */ + omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | + OMR_FDX)); + omr |= lp->infoblock_csr6; + if (omr & OMR_PS) omr |= OMR_HBD; + outl(omr, DE4X5_OMR); + + /* Soft Reset */ + RESET_DE4X5; + + /* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */ + if (lp->chipset == DC21140) { + gep_wr(lp->cache.gepc, dev); + gep_wr(lp->cache.gep, dev); + } else if ((lp->chipset & ~0x0ff) == DC2114x) { + reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, lp->cache.csr15); + } + + /* Restore CSR6 */ + outl(omr, DE4X5_OMR); + + /* Reset CSR8 */ + inl(DE4X5_MFC); + + return omr; +} + +static void +gep_wr(s32 data, struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->chipset == DC21140) { + outl(data, DE4X5_GEP); + } else if ((lp->chipset & ~0x00ff) == DC2114x) { + outl((data<<16) | lp->cache.csr15, DE4X5_SIGR); + } +} + +static int +gep_rd(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->chipset == DC21140) { + return inl(DE4X5_GEP); + } else if ((lp->chipset & ~0x00ff) == DC2114x) { + return inl(DE4X5_SIGR) & 0x000fffff; + } + + return 0; +} + +static void +yawn(struct net_device *dev, int state) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if ((lp->chipset == DC21040) || (lp->chipset == DC21140)) return; + + if(lp->bus == EISA) { + switch(state) { + case WAKEUP: + outb(WAKEUP, PCI_CFPM); + mdelay(10); + break; + + case SNOOZE: + outb(SNOOZE, PCI_CFPM); + break; + + case SLEEP: + outl(0, DE4X5_SICR); + outb(SLEEP, PCI_CFPM); + break; + } + } else { + struct pci_dev *pdev = to_pci_dev (lp->gendev); + switch(state) { + case WAKEUP: + pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP); + mdelay(10); + break; + + case SNOOZE: + pci_write_config_byte(pdev, PCI_CFDA_PSM, SNOOZE); + break; + + case SLEEP: + outl(0, DE4X5_SICR); + pci_write_config_byte(pdev, PCI_CFDA_PSM, SLEEP); + break; + } + } +} + +static void +de4x5_parse_params(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + char *p, *q, t; + + lp->params.fdx = 0; + lp->params.autosense = AUTO; + + if (args == NULL) return; + + if ((p = strstr(args, dev->name))) { + if (!(q = strstr(p+strlen(dev->name), "eth"))) q = p + strlen(p); + t = *q; + *q = '\0'; + + if (strstr(p, "fdx") || strstr(p, "FDX")) lp->params.fdx = 1; + + if (strstr(p, "autosense") || strstr(p, "AUTOSENSE")) { + if (strstr(p, "TP")) { + lp->params.autosense = TP; + } else if (strstr(p, "TP_NW")) { + lp->params.autosense = TP_NW; + } else if (strstr(p, "BNC")) { + lp->params.autosense = BNC; + } else if (strstr(p, "AUI")) { + lp->params.autosense = AUI; + } else if (strstr(p, "BNC_AUI")) { + lp->params.autosense = BNC; + } else if (strstr(p, "10Mb")) { + lp->params.autosense = _10Mb; + } else if (strstr(p, "100Mb")) { + lp->params.autosense = _100Mb; + } else if (strstr(p, "AUTO")) { + lp->params.autosense = AUTO; + } + } + *q = t; + } +} + +static void +de4x5_dbg_open(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + + if (de4x5_debug & DEBUG_OPEN) { + printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq); + printk("\tphysical address: "); + for (i=0;i<6;i++) { + printk("%2.2x:",(short)dev->dev_addr[i]); + } + printk("\n"); + printk("Descriptor head addresses:\n"); + printk("\t0x%8.8lx 0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring); + printk("Descriptor addresses:\nRX: "); + for (i=0;i<lp->rxRingSize-1;i++){ + if (i < 3) { + printk("0x%8.8lx ",(u_long)&lp->rx_ring[i].status); + } + } + printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status); + printk("TX: "); + for (i=0;i<lp->txRingSize-1;i++){ + if (i < 3) { + printk("0x%8.8lx ", (u_long)&lp->tx_ring[i].status); + } + } + printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status); + printk("Descriptor buffers:\nRX: "); + for (i=0;i<lp->rxRingSize-1;i++){ + if (i < 3) { + printk("0x%8.8x ",le32_to_cpu(lp->rx_ring[i].buf)); + } + } + printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf)); + printk("TX: "); + for (i=0;i<lp->txRingSize-1;i++){ + if (i < 3) { + printk("0x%8.8x ", le32_to_cpu(lp->tx_ring[i].buf)); + } + } + printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf)); + printk("Ring size:\nRX: %d\nTX: %d\n", + (short)lp->rxRingSize, + (short)lp->txRingSize); + } +} + +static void +de4x5_dbg_mii(struct net_device *dev, int k) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (de4x5_debug & DEBUG_MII) { + printk("\nMII device address: %d\n", lp->phy[k].addr); + printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII)); + printk("MII SR: %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII)); + printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII)); + printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII)); + if (lp->phy[k].id != BROADCOM_T4) { + printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII)); + printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII)); + } + printk("MII 16: %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII)); + if (lp->phy[k].id != BROADCOM_T4) { + printk("MII 17: %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII)); + printk("MII 18: %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII)); + } else { + printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII)); + } + } +} + +static void +de4x5_dbg_media(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + if (lp->media != lp->c_media) { + if (de4x5_debug & DEBUG_MEDIA) { + printk("%s: media is %s%s\n", dev->name, + (lp->media == NC ? "unconnected, link down or incompatible connection" : + (lp->media == TP ? "TP" : + (lp->media == ANS ? "TP/Nway" : + (lp->media == BNC ? "BNC" : + (lp->media == AUI ? "AUI" : + (lp->media == BNC_AUI ? "BNC/AUI" : + (lp->media == EXT_SIA ? "EXT SIA" : + (lp->media == _100Mb ? "100Mb/s" : + (lp->media == _10Mb ? "10Mb/s" : + "???" + ))))))))), (lp->fdx?" full duplex.":".")); + } + lp->c_media = lp->media; + } +} + +static void +de4x5_dbg_srom(struct de4x5_srom *p) +{ + int i; + + if (de4x5_debug & DEBUG_SROM) { + printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id)); + printk("Sub-system ID: %04x\n", *((u_short *)p->sub_system_id)); + printk("ID Block CRC: %02x\n", (u_char)(p->id_block_crc)); + printk("SROM version: %02x\n", (u_char)(p->version)); + printk("# controllers: %02x\n", (u_char)(p->num_controllers)); + + printk("Hardware Address: %pM\n", p->ieee_addr); + printk("CRC checksum: %04x\n", (u_short)(p->chksum)); + for (i=0; i<64; i++) { + printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i)); + } + } +} + +static void +de4x5_dbg_rx(struct sk_buff *skb, int len) +{ + int i, j; + + if (de4x5_debug & DEBUG_RX) { + printk("R: %pM <- %pM len/SAP:%02x%02x [%d]\n", + skb->data, &skb->data[6], + (u_char)skb->data[12], + (u_char)skb->data[13], + len); + for (j=0; len>0;j+=16, len-=16) { + printk(" %03x: ",j); + for (i=0; i<16 && i<len; i++) { + printk("%02x ",(u_char)skb->data[i+j]); + } + printk("\n"); + } + } +} + +/* +** Perform IOCTL call functions here. Some are privileged operations and the +** effective uid is checked in those cases. In the normal course of events +** this function is only used for my testing. +*/ +static int +de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct de4x5_ioctl *ioc = (struct de4x5_ioctl *) &rq->ifr_ifru; + u_long iobase = dev->base_addr; + int i, j, status = 0; + s32 omr; + union { + u8 addr[144]; + u16 sval[72]; + u32 lval[36]; + } tmp; + u_long flags = 0; + + switch(ioc->cmd) { + case DE4X5_GET_HWADDR: /* Get the hardware address */ + ioc->len = ETH_ALEN; + for (i=0; i<ETH_ALEN; i++) { + tmp.addr[i] = dev->dev_addr[i]; + } + if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT; + break; + + case DE4X5_SET_HWADDR: /* Set the hardware address */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) return -EFAULT; + if (netif_queue_stopped(dev)) + return -EBUSY; + netif_stop_queue(dev); + for (i=0; i<ETH_ALEN; i++) { + dev->dev_addr[i] = tmp.addr[i]; + } + build_setup_frame(dev, PHYS_ADDR_ONLY); + /* Set up the descriptor and give ownership to the card */ + load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET | + SETUP_FRAME_LEN, (struct sk_buff *)1); + lp->tx_new = (lp->tx_new + 1) % lp->txRingSize; + outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */ + netif_wake_queue(dev); /* Unlock the TX ring */ + break; + + case DE4X5_SAY_BOO: /* Say "Boo!" to the kernel log file */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + printk("%s: Boo!\n", dev->name); + break; + + case DE4X5_MCA_EN: /* Enable pass all multicast addressing */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + omr = inl(DE4X5_OMR); + omr |= OMR_PM; + outl(omr, DE4X5_OMR); + break; + + case DE4X5_GET_STATS: /* Get the driver statistics */ + { + struct pkt_stats statbuf; + ioc->len = sizeof(statbuf); + spin_lock_irqsave(&lp->lock, flags); + memcpy(&statbuf, &lp->pktStats, ioc->len); + spin_unlock_irqrestore(&lp->lock, flags); + if (copy_to_user(ioc->data, &statbuf, ioc->len)) + return -EFAULT; + break; + } + case DE4X5_CLR_STATS: /* Zero out the driver statistics */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + spin_lock_irqsave(&lp->lock, flags); + memset(&lp->pktStats, 0, sizeof(lp->pktStats)); + spin_unlock_irqrestore(&lp->lock, flags); + break; + + case DE4X5_GET_OMR: /* Get the OMR Register contents */ + tmp.addr[0] = inl(DE4X5_OMR); + if (copy_to_user(ioc->data, tmp.addr, 1)) return -EFAULT; + break; + + case DE4X5_SET_OMR: /* Set the OMR Register contents */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (copy_from_user(tmp.addr, ioc->data, 1)) return -EFAULT; + outl(tmp.addr[0], DE4X5_OMR); + break; + + case DE4X5_GET_REG: /* Get the DE4X5 Registers */ + j = 0; + tmp.lval[0] = inl(DE4X5_STS); j+=4; + tmp.lval[1] = inl(DE4X5_BMR); j+=4; + tmp.lval[2] = inl(DE4X5_IMR); j+=4; + tmp.lval[3] = inl(DE4X5_OMR); j+=4; + tmp.lval[4] = inl(DE4X5_SISR); j+=4; + tmp.lval[5] = inl(DE4X5_SICR); j+=4; + tmp.lval[6] = inl(DE4X5_STRR); j+=4; + tmp.lval[7] = inl(DE4X5_SIGR); j+=4; + ioc->len = j; + if (copy_to_user(ioc->data, tmp.lval, ioc->len)) + return -EFAULT; + break; + +#define DE4X5_DUMP 0x0f /* Dump the DE4X5 Status */ +/* + case DE4X5_DUMP: + j = 0; + tmp.addr[j++] = dev->irq; + for (i=0; i<ETH_ALEN; i++) { + tmp.addr[j++] = dev->dev_addr[i]; + } + tmp.addr[j++] = lp->rxRingSize; + tmp.lval[j>>2] = (long)lp->rx_ring; j+=4; + tmp.lval[j>>2] = (long)lp->tx_ring; j+=4; + + for (i=0;i<lp->rxRingSize-1;i++){ + if (i < 3) { + tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4; + } + } + tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4; + for (i=0;i<lp->txRingSize-1;i++){ + if (i < 3) { + tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4; + } + } + tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4; + + for (i=0;i<lp->rxRingSize-1;i++){ + if (i < 3) { + tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4; + } + } + tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4; + for (i=0;i<lp->txRingSize-1;i++){ + if (i < 3) { + tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4; + } + } + tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4; + + for (i=0;i<lp->rxRingSize;i++){ + tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4; + } + for (i=0;i<lp->txRingSize;i++){ + tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4; + } + + tmp.lval[j>>2] = inl(DE4X5_BMR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_TPD); j+=4; + tmp.lval[j>>2] = inl(DE4X5_RPD); j+=4; + tmp.lval[j>>2] = inl(DE4X5_RRBA); j+=4; + tmp.lval[j>>2] = inl(DE4X5_TRBA); j+=4; + tmp.lval[j>>2] = inl(DE4X5_STS); j+=4; + tmp.lval[j>>2] = inl(DE4X5_OMR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_IMR); j+=4; + tmp.lval[j>>2] = lp->chipset; j+=4; + if (lp->chipset == DC21140) { + tmp.lval[j>>2] = gep_rd(dev); j+=4; + } else { + tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4; + } + tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4; + if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) { + tmp.lval[j>>2] = lp->active; j+=4; + tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(MII_ID1,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + if (lp->phy[lp->active].id != BROADCOM_T4) { + tmp.lval[j>>2]=mii_rd(MII_ANA,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(MII_ANLPA,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + } + tmp.lval[j>>2]=mii_rd(0x10,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + if (lp->phy[lp->active].id != BROADCOM_T4) { + tmp.lval[j>>2]=mii_rd(0x11,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(0x12,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + } else { + tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + } + } + + tmp.addr[j++] = lp->txRingSize; + tmp.addr[j++] = netif_queue_stopped(dev); + + ioc->len = j; + if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT; + break; + +*/ + default: + return -EOPNOTSUPP; + } + + return status; +} + +static int __init de4x5_module_init (void) +{ + int err = 0; + +#ifdef CONFIG_PCI + err = pci_register_driver(&de4x5_pci_driver); +#endif +#ifdef CONFIG_EISA + err |= eisa_driver_register (&de4x5_eisa_driver); +#endif + + return err; +} + +static void __exit de4x5_module_exit (void) +{ +#ifdef CONFIG_PCI + pci_unregister_driver (&de4x5_pci_driver); +#endif +#ifdef CONFIG_EISA + eisa_driver_unregister (&de4x5_eisa_driver); +#endif +} + +module_init (de4x5_module_init); +module_exit (de4x5_module_exit); diff --git a/drivers/net/ethernet/dec/tulip/de4x5.h b/drivers/net/ethernet/dec/tulip/de4x5.h new file mode 100644 index 00000000000..9f2877438fb --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/de4x5.h @@ -0,0 +1,1019 @@ +/* + Copyright 1994 Digital Equipment Corporation. + + This software may be used and distributed according to the terms of the + GNU General Public License, incorporated herein by reference. + + The author may be reached as davies@wanton.lkg.dec.com or Digital + Equipment Corporation, 550 King Street, Littleton MA 01460. + + ========================================================================= +*/ + +/* +** DC21040 CSR<1..15> Register Address Map +*/ +#define DE4X5_BMR iobase+(0x000 << lp->bus) /* Bus Mode Register */ +#define DE4X5_TPD iobase+(0x008 << lp->bus) /* Transmit Poll Demand Reg */ +#define DE4X5_RPD iobase+(0x010 << lp->bus) /* Receive Poll Demand Reg */ +#define DE4X5_RRBA iobase+(0x018 << lp->bus) /* RX Ring Base Address Reg */ +#define DE4X5_TRBA iobase+(0x020 << lp->bus) /* TX Ring Base Address Reg */ +#define DE4X5_STS iobase+(0x028 << lp->bus) /* Status Register */ +#define DE4X5_OMR iobase+(0x030 << lp->bus) /* Operation Mode Register */ +#define DE4X5_IMR iobase+(0x038 << lp->bus) /* Interrupt Mask Register */ +#define DE4X5_MFC iobase+(0x040 << lp->bus) /* Missed Frame Counter */ +#define DE4X5_APROM iobase+(0x048 << lp->bus) /* Ethernet Address PROM */ +#define DE4X5_BROM iobase+(0x048 << lp->bus) /* Boot ROM Register */ +#define DE4X5_SROM iobase+(0x048 << lp->bus) /* Serial ROM Register */ +#define DE4X5_MII iobase+(0x048 << lp->bus) /* MII Interface Register */ +#define DE4X5_DDR iobase+(0x050 << lp->bus) /* Data Diagnostic Register */ +#define DE4X5_FDR iobase+(0x058 << lp->bus) /* Full Duplex Register */ +#define DE4X5_GPT iobase+(0x058 << lp->bus) /* General Purpose Timer Reg.*/ +#define DE4X5_GEP iobase+(0x060 << lp->bus) /* General Purpose Register */ +#define DE4X5_SISR iobase+(0x060 << lp->bus) /* SIA Status Register */ +#define DE4X5_SICR iobase+(0x068 << lp->bus) /* SIA Connectivity Register */ +#define DE4X5_STRR iobase+(0x070 << lp->bus) /* SIA TX/RX Register */ +#define DE4X5_SIGR iobase+(0x078 << lp->bus) /* SIA General Register */ + +/* +** EISA Register Address Map +*/ +#define EISA_ID iobase+0x0c80 /* EISA ID Registers */ +#define EISA_ID0 iobase+0x0c80 /* EISA ID Register 0 */ +#define EISA_ID1 iobase+0x0c81 /* EISA ID Register 1 */ +#define EISA_ID2 iobase+0x0c82 /* EISA ID Register 2 */ +#define EISA_ID3 iobase+0x0c83 /* EISA ID Register 3 */ +#define EISA_CR iobase+0x0c84 /* EISA Control Register */ +#define EISA_REG0 iobase+0x0c88 /* EISA Configuration Register 0 */ +#define EISA_REG1 iobase+0x0c89 /* EISA Configuration Register 1 */ +#define EISA_REG2 iobase+0x0c8a /* EISA Configuration Register 2 */ +#define EISA_REG3 iobase+0x0c8f /* EISA Configuration Register 3 */ +#define EISA_APROM iobase+0x0c90 /* Ethernet Address PROM */ + +/* +** PCI/EISA Configuration Registers Address Map +*/ +#define PCI_CFID iobase+0x0008 /* PCI Configuration ID Register */ +#define PCI_CFCS iobase+0x000c /* PCI Command/Status Register */ +#define PCI_CFRV iobase+0x0018 /* PCI Revision Register */ +#define PCI_CFLT iobase+0x001c /* PCI Latency Timer Register */ +#define PCI_CBIO iobase+0x0028 /* PCI Base I/O Register */ +#define PCI_CBMA iobase+0x002c /* PCI Base Memory Address Register */ +#define PCI_CBER iobase+0x0030 /* PCI Expansion ROM Base Address Reg. */ +#define PCI_CFIT iobase+0x003c /* PCI Configuration Interrupt Register */ +#define PCI_CFDA iobase+0x0040 /* PCI Driver Area Register */ +#define PCI_CFDD iobase+0x0041 /* PCI Driver Dependent Area Register */ +#define PCI_CFPM iobase+0x0043 /* PCI Power Management Area Register */ + +/* +** EISA Configuration Register 0 bit definitions +*/ +#define ER0_BSW 0x80 /* EISA Bus Slave Width, 1: 32 bits */ +#define ER0_BMW 0x40 /* EISA Bus Master Width, 1: 32 bits */ +#define ER0_EPT 0x20 /* EISA PREEMPT Time, 0: 23 BCLKs */ +#define ER0_ISTS 0x10 /* Interrupt Status (X) */ +#define ER0_LI 0x08 /* Latch Interrupts */ +#define ER0_INTL 0x06 /* INTerrupt Level */ +#define ER0_INTT 0x01 /* INTerrupt Type, 0: Level, 1: Edge */ + +/* +** EISA Configuration Register 1 bit definitions +*/ +#define ER1_IAM 0xe0 /* ISA Address Mode */ +#define ER1_IAE 0x10 /* ISA Addressing Enable */ +#define ER1_UPIN 0x0f /* User Pins */ + +/* +** EISA Configuration Register 2 bit definitions +*/ +#define ER2_BRS 0xc0 /* Boot ROM Size */ +#define ER2_BRA 0x3c /* Boot ROM Address <16:13> */ + +/* +** EISA Configuration Register 3 bit definitions +*/ +#define ER3_BWE 0x40 /* Burst Write Enable */ +#define ER3_BRE 0x04 /* Burst Read Enable */ +#define ER3_LSR 0x02 /* Local Software Reset */ + +/* +** PCI Configuration ID Register (PCI_CFID). The Device IDs are left +** shifted 8 bits to allow detection of DC21142 and DC21143 variants with +** the configuration revision register step number. +*/ +#define CFID_DID 0xff00 /* Device ID */ +#define CFID_VID 0x00ff /* Vendor ID */ +#define DC21040_DID 0x0200 /* Unique Device ID # */ +#define DC21040_VID 0x1011 /* DC21040 Manufacturer */ +#define DC21041_DID 0x1400 /* Unique Device ID # */ +#define DC21041_VID 0x1011 /* DC21041 Manufacturer */ +#define DC21140_DID 0x0900 /* Unique Device ID # */ +#define DC21140_VID 0x1011 /* DC21140 Manufacturer */ +#define DC2114x_DID 0x1900 /* Unique Device ID # */ +#define DC2114x_VID 0x1011 /* DC2114[23] Manufacturer */ + +/* +** Chipset defines +*/ +#define DC21040 DC21040_DID +#define DC21041 DC21041_DID +#define DC21140 DC21140_DID +#define DC2114x DC2114x_DID +#define DC21142 (DC2114x_DID | 0x0010) +#define DC21143 (DC2114x_DID | 0x0030) +#define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */ + +#define is_DC21040 ((vendor == DC21040_VID) && (device == DC21040_DID)) +#define is_DC21041 ((vendor == DC21041_VID) && (device == DC21041_DID)) +#define is_DC21140 ((vendor == DC21140_VID) && (device == DC21140_DID)) +#define is_DC2114x ((vendor == DC2114x_VID) && (device == DC2114x_DID)) +#define is_DC21142 ((vendor == DC2114x_VID) && (device == DC21142)) +#define is_DC21143 ((vendor == DC2114x_VID) && (device == DC21143)) + +/* +** PCI Configuration Command/Status Register (PCI_CFCS) +*/ +#define CFCS_DPE 0x80000000 /* Detected Parity Error (S) */ +#define CFCS_SSE 0x40000000 /* Signal System Error (S) */ +#define CFCS_RMA 0x20000000 /* Receive Master Abort (S) */ +#define CFCS_RTA 0x10000000 /* Receive Target Abort (S) */ +#define CFCS_DST 0x06000000 /* DEVSEL Timing (S) */ +#define CFCS_DPR 0x01000000 /* Data Parity Report (S) */ +#define CFCS_FBB 0x00800000 /* Fast Back-To-Back (S) */ +#define CFCS_SEE 0x00000100 /* System Error Enable (C) */ +#define CFCS_PER 0x00000040 /* Parity Error Response (C) */ +#define CFCS_MO 0x00000004 /* Master Operation (C) */ +#define CFCS_MSA 0x00000002 /* Memory Space Access (C) */ +#define CFCS_IOSA 0x00000001 /* I/O Space Access (C) */ + +/* +** PCI Configuration Revision Register (PCI_CFRV) +*/ +#define CFRV_BC 0xff000000 /* Base Class */ +#define CFRV_SC 0x00ff0000 /* Subclass */ +#define CFRV_RN 0x000000f0 /* Revision Number */ +#define CFRV_SN 0x0000000f /* Step Number */ +#define BASE_CLASS 0x02000000 /* Indicates Network Controller */ +#define SUB_CLASS 0x00000000 /* Indicates Ethernet Controller */ +#define STEP_NUMBER 0x00000020 /* Increments for future chips */ +#define REV_NUMBER 0x00000003 /* 0x00, 0x01, 0x02, 0x03: Rev in Step */ +#define CFRV_MASK 0xffff0000 /* Register mask */ + +/* +** PCI Configuration Latency Timer Register (PCI_CFLT) +*/ +#define CFLT_BC 0x0000ff00 /* Latency Timer bits */ + +/* +** PCI Configuration Base I/O Address Register (PCI_CBIO) +*/ +#define CBIO_MASK -128 /* Base I/O Address Mask */ +#define CBIO_IOSI 0x00000001 /* I/O Space Indicator (RO, value is 1) */ + +/* +** PCI Configuration Card Information Structure Register (PCI_CCIS) +*/ +#define CCIS_ROMI 0xf0000000 /* ROM Image */ +#define CCIS_ASO 0x0ffffff8 /* Address Space Offset */ +#define CCIS_ASI 0x00000007 /* Address Space Indicator */ + +/* +** PCI Configuration Subsystem ID Register (PCI_SSID) +*/ +#define SSID_SSID 0xffff0000 /* Subsystem ID */ +#define SSID_SVID 0x0000ffff /* Subsystem Vendor ID */ + +/* +** PCI Configuration Expansion ROM Base Address Register (PCI_CBER) +*/ +#define CBER_MASK 0xfffffc00 /* Expansion ROM Base Address Mask */ +#define CBER_ROME 0x00000001 /* ROM Enable */ + +/* +** PCI Configuration Interrupt Register (PCI_CFIT) +*/ +#define CFIT_MXLT 0xff000000 /* MAX_LAT Value (0.25us periods) */ +#define CFIT_MNGT 0x00ff0000 /* MIN_GNT Value (0.25us periods) */ +#define CFIT_IRQP 0x0000ff00 /* Interrupt Pin */ +#define CFIT_IRQL 0x000000ff /* Interrupt Line */ + +/* +** PCI Configuration Power Management Area Register (PCI_CFPM) +*/ +#define SLEEP 0x80 /* Power Saving Sleep Mode */ +#define SNOOZE 0x40 /* Power Saving Snooze Mode */ +#define WAKEUP 0x00 /* Power Saving Wakeup */ + +#define PCI_CFDA_DSU 0x41 /* 8 bit Configuration Space Address */ +#define PCI_CFDA_PSM 0x43 /* 8 bit Configuration Space Address */ + +/* +** DC21040 Bus Mode Register (DE4X5_BMR) +*/ +#define BMR_RML 0x00200000 /* [Memory] Read Multiple */ +#define BMR_DBO 0x00100000 /* Descriptor Byte Ordering (Endian) */ +#define BMR_TAP 0x000e0000 /* Transmit Automatic Polling */ +#define BMR_DAS 0x00010000 /* Diagnostic Address Space */ +#define BMR_CAL 0x0000c000 /* Cache Alignment */ +#define BMR_PBL 0x00003f00 /* Programmable Burst Length */ +#define BMR_BLE 0x00000080 /* Big/Little Endian */ +#define BMR_DSL 0x0000007c /* Descriptor Skip Length */ +#define BMR_BAR 0x00000002 /* Bus ARbitration */ +#define BMR_SWR 0x00000001 /* Software Reset */ + + /* Timings here are for 10BASE-T/AUI only*/ +#define TAP_NOPOLL 0x00000000 /* No automatic polling */ +#define TAP_200US 0x00020000 /* TX automatic polling every 200us */ +#define TAP_800US 0x00040000 /* TX automatic polling every 800us */ +#define TAP_1_6MS 0x00060000 /* TX automatic polling every 1.6ms */ +#define TAP_12_8US 0x00080000 /* TX automatic polling every 12.8us */ +#define TAP_25_6US 0x000a0000 /* TX automatic polling every 25.6us */ +#define TAP_51_2US 0x000c0000 /* TX automatic polling every 51.2us */ +#define TAP_102_4US 0x000e0000 /* TX automatic polling every 102.4us */ + +#define CAL_NOUSE 0x00000000 /* Not used */ +#define CAL_8LONG 0x00004000 /* 8-longword alignment */ +#define CAL_16LONG 0x00008000 /* 16-longword alignment */ +#define CAL_32LONG 0x0000c000 /* 32-longword alignment */ + +#define PBL_0 0x00000000 /* DMA burst length = amount in RX FIFO */ +#define PBL_1 0x00000100 /* 1 longword DMA burst length */ +#define PBL_2 0x00000200 /* 2 longwords DMA burst length */ +#define PBL_4 0x00000400 /* 4 longwords DMA burst length */ +#define PBL_8 0x00000800 /* 8 longwords DMA burst length */ +#define PBL_16 0x00001000 /* 16 longwords DMA burst length */ +#define PBL_32 0x00002000 /* 32 longwords DMA burst length */ + +#define DSL_0 0x00000000 /* 0 longword / descriptor */ +#define DSL_1 0x00000004 /* 1 longword / descriptor */ +#define DSL_2 0x00000008 /* 2 longwords / descriptor */ +#define DSL_4 0x00000010 /* 4 longwords / descriptor */ +#define DSL_8 0x00000020 /* 8 longwords / descriptor */ +#define DSL_16 0x00000040 /* 16 longwords / descriptor */ +#define DSL_32 0x00000080 /* 32 longwords / descriptor */ + +/* +** DC21040 Transmit Poll Demand Register (DE4X5_TPD) +*/ +#define TPD 0x00000001 /* Transmit Poll Demand */ + +/* +** DC21040 Receive Poll Demand Register (DE4X5_RPD) +*/ +#define RPD 0x00000001 /* Receive Poll Demand */ + +/* +** DC21040 Receive Ring Base Address Register (DE4X5_RRBA) +*/ +#define RRBA 0xfffffffc /* RX Descriptor List Start Address */ + +/* +** DC21040 Transmit Ring Base Address Register (DE4X5_TRBA) +*/ +#define TRBA 0xfffffffc /* TX Descriptor List Start Address */ + +/* +** Status Register (DE4X5_STS) +*/ +#define STS_GPI 0x04000000 /* General Purpose Port Interrupt */ +#define STS_BE 0x03800000 /* Bus Error Bits */ +#define STS_TS 0x00700000 /* Transmit Process State */ +#define STS_RS 0x000e0000 /* Receive Process State */ +#define STS_NIS 0x00010000 /* Normal Interrupt Summary */ +#define STS_AIS 0x00008000 /* Abnormal Interrupt Summary */ +#define STS_ER 0x00004000 /* Early Receive */ +#define STS_FBE 0x00002000 /* Fatal Bus Error */ +#define STS_SE 0x00002000 /* System Error */ +#define STS_LNF 0x00001000 /* Link Fail */ +#define STS_FD 0x00000800 /* Full-Duplex Short Frame Received */ +#define STS_TM 0x00000800 /* Timer Expired (DC21041) */ +#define STS_ETI 0x00000400 /* Early Transmit Interrupt */ +#define STS_AT 0x00000400 /* AUI/TP Pin */ +#define STS_RWT 0x00000200 /* Receive Watchdog Time-Out */ +#define STS_RPS 0x00000100 /* Receive Process Stopped */ +#define STS_RU 0x00000080 /* Receive Buffer Unavailable */ +#define STS_RI 0x00000040 /* Receive Interrupt */ +#define STS_UNF 0x00000020 /* Transmit Underflow */ +#define STS_LNP 0x00000010 /* Link Pass */ +#define STS_ANC 0x00000010 /* Autonegotiation Complete */ +#define STS_TJT 0x00000008 /* Transmit Jabber Time-Out */ +#define STS_TU 0x00000004 /* Transmit Buffer Unavailable */ +#define STS_TPS 0x00000002 /* Transmit Process Stopped */ +#define STS_TI 0x00000001 /* Transmit Interrupt */ + +#define EB_PAR 0x00000000 /* Parity Error */ +#define EB_MA 0x00800000 /* Master Abort */ +#define EB_TA 0x01000000 /* Target Abort */ +#define EB_RES0 0x01800000 /* Reserved */ +#define EB_RES1 0x02000000 /* Reserved */ + +#define TS_STOP 0x00000000 /* Stopped */ +#define TS_FTD 0x00100000 /* Fetch Transmit Descriptor */ +#define TS_WEOT 0x00200000 /* Wait for End Of Transmission */ +#define TS_QDAT 0x00300000 /* Queue skb data into TX FIFO */ +#define TS_RES 0x00400000 /* Reserved */ +#define TS_SPKT 0x00500000 /* Setup Packet */ +#define TS_SUSP 0x00600000 /* Suspended */ +#define TS_CLTD 0x00700000 /* Close Transmit Descriptor */ + +#define RS_STOP 0x00000000 /* Stopped */ +#define RS_FRD 0x00020000 /* Fetch Receive Descriptor */ +#define RS_CEOR 0x00040000 /* Check for End of Receive Packet */ +#define RS_WFRP 0x00060000 /* Wait for Receive Packet */ +#define RS_SUSP 0x00080000 /* Suspended */ +#define RS_CLRD 0x000a0000 /* Close Receive Descriptor */ +#define RS_FLUSH 0x000c0000 /* Flush RX FIFO */ +#define RS_QRFS 0x000e0000 /* Queue RX FIFO into RX Skb */ + +#define INT_CANCEL 0x0001ffff /* For zeroing all interrupt sources */ + +/* +** Operation Mode Register (DE4X5_OMR) +*/ +#define OMR_SC 0x80000000 /* Special Capture Effect Enable */ +#define OMR_RA 0x40000000 /* Receive All */ +#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */ +#define OMR_SCR 0x01000000 /* Scrambler Mode */ +#define OMR_PCS 0x00800000 /* PCS Function */ +#define OMR_TTM 0x00400000 /* Transmit Threshold Mode */ +#define OMR_SF 0x00200000 /* Store and Forward */ +#define OMR_HBD 0x00080000 /* HeartBeat Disable */ +#define OMR_PS 0x00040000 /* Port Select */ +#define OMR_CA 0x00020000 /* Capture Effect Enable */ +#define OMR_BP 0x00010000 /* Back Pressure */ +#define OMR_TR 0x0000c000 /* Threshold Control Bits */ +#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */ +#define OMR_FC 0x00001000 /* Force Collision Mode */ +#define OMR_OM 0x00000c00 /* Operating Mode */ +#define OMR_FDX 0x00000200 /* Full Duplex Mode */ +#define OMR_FKD 0x00000100 /* Flaky Oscillator Disable */ +#define OMR_PM 0x00000080 /* Pass All Multicast */ +#define OMR_PR 0x00000040 /* Promiscuous Mode */ +#define OMR_SB 0x00000020 /* Start/Stop Backoff Counter */ +#define OMR_IF 0x00000010 /* Inverse Filtering */ +#define OMR_PB 0x00000008 /* Pass Bad Frames */ +#define OMR_HO 0x00000004 /* Hash Only Filtering Mode */ +#define OMR_SR 0x00000002 /* Start/Stop Receive */ +#define OMR_HP 0x00000001 /* Hash/Perfect Receive Filtering Mode */ + +#define TR_72 0x00000000 /* Threshold set to 72 (128) bytes */ +#define TR_96 0x00004000 /* Threshold set to 96 (256) bytes */ +#define TR_128 0x00008000 /* Threshold set to 128 (512) bytes */ +#define TR_160 0x0000c000 /* Threshold set to 160 (1024) bytes */ + +#define OMR_DEF (OMR_SDP) +#define OMR_SIA (OMR_SDP | OMR_TTM) +#define OMR_SYM (OMR_SDP | OMR_SCR | OMR_PCS | OMR_HBD | OMR_PS) +#define OMR_MII_10 (OMR_SDP | OMR_TTM | OMR_PS) +#define OMR_MII_100 (OMR_SDP | OMR_HBD | OMR_PS) + +/* +** DC21040 Interrupt Mask Register (DE4X5_IMR) +*/ +#define IMR_GPM 0x04000000 /* General Purpose Port Mask */ +#define IMR_NIM 0x00010000 /* Normal Interrupt Summary Mask */ +#define IMR_AIM 0x00008000 /* Abnormal Interrupt Summary Mask */ +#define IMR_ERM 0x00004000 /* Early Receive Mask */ +#define IMR_FBM 0x00002000 /* Fatal Bus Error Mask */ +#define IMR_SEM 0x00002000 /* System Error Mask */ +#define IMR_LFM 0x00001000 /* Link Fail Mask */ +#define IMR_FDM 0x00000800 /* Full-Duplex (Short Frame) Mask */ +#define IMR_TMM 0x00000800 /* Timer Expired Mask (DC21041) */ +#define IMR_ETM 0x00000400 /* Early Transmit Interrupt Mask */ +#define IMR_ATM 0x00000400 /* AUI/TP Switch Mask */ +#define IMR_RWM 0x00000200 /* Receive Watchdog Time-Out Mask */ +#define IMR_RSM 0x00000100 /* Receive Stopped Mask */ +#define IMR_RUM 0x00000080 /* Receive Buffer Unavailable Mask */ +#define IMR_RIM 0x00000040 /* Receive Interrupt Mask */ +#define IMR_UNM 0x00000020 /* Underflow Interrupt Mask */ +#define IMR_ANM 0x00000010 /* Autonegotiation Complete Mask */ +#define IMR_LPM 0x00000010 /* Link Pass */ +#define IMR_TJM 0x00000008 /* Transmit Time-Out Jabber Mask */ +#define IMR_TUM 0x00000004 /* Transmit Buffer Unavailable Mask */ +#define IMR_TSM 0x00000002 /* Transmission Stopped Mask */ +#define IMR_TIM 0x00000001 /* Transmit Interrupt Mask */ + +/* +** Missed Frames and FIFO Overflow Counters (DE4X5_MFC) +*/ +#define MFC_FOCO 0x10000000 /* FIFO Overflow Counter Overflow Bit */ +#define MFC_FOC 0x0ffe0000 /* FIFO Overflow Counter Bits */ +#define MFC_OVFL 0x00010000 /* Missed Frames Counter Overflow Bit */ +#define MFC_CNTR 0x0000ffff /* Missed Frames Counter Bits */ +#define MFC_FOCM 0x1ffe0000 /* FIFO Overflow Counter Mask */ + +/* +** DC21040 Ethernet Address PROM (DE4X5_APROM) +*/ +#define APROM_DN 0x80000000 /* Data Not Valid */ +#define APROM_DT 0x000000ff /* Address Byte */ + +/* +** DC21041 Boot/Ethernet Address ROM (DE4X5_BROM) +*/ +#define BROM_MODE 0x00008000 /* MODE_1: 0, MODE_0: 1 (read only) */ +#define BROM_RD 0x00004000 /* Read from Boot ROM */ +#define BROM_WR 0x00002000 /* Write to Boot ROM */ +#define BROM_BR 0x00001000 /* Select Boot ROM when set */ +#define BROM_SR 0x00000800 /* Select Serial ROM when set */ +#define BROM_REG 0x00000400 /* External Register Select */ +#define BROM_DT 0x000000ff /* Data Byte */ + +/* +** DC21041 Serial/Ethernet Address ROM (DE4X5_SROM, DE4X5_MII) +*/ +#define MII_MDI 0x00080000 /* MII Management Data In */ +#define MII_MDO 0x00060000 /* MII Management Mode/Data Out */ +#define MII_MRD 0x00040000 /* MII Management Define Read Mode */ +#define MII_MWR 0x00000000 /* MII Management Define Write Mode */ +#define MII_MDT 0x00020000 /* MII Management Data Out */ +#define MII_MDC 0x00010000 /* MII Management Clock */ +#define MII_RD 0x00004000 /* Read from MII */ +#define MII_WR 0x00002000 /* Write to MII */ +#define MII_SEL 0x00000800 /* Select MII when RESET */ + +#define SROM_MODE 0x00008000 /* MODE_1: 0, MODE_0: 1 (read only) */ +#define SROM_RD 0x00004000 /* Read from Boot ROM */ +#define SROM_WR 0x00002000 /* Write to Boot ROM */ +#define SROM_BR 0x00001000 /* Select Boot ROM when set */ +#define SROM_SR 0x00000800 /* Select Serial ROM when set */ +#define SROM_REG 0x00000400 /* External Register Select */ +#define SROM_DT 0x000000ff /* Data Byte */ + +#define DT_OUT 0x00000008 /* Serial Data Out */ +#define DT_IN 0x00000004 /* Serial Data In */ +#define DT_CLK 0x00000002 /* Serial ROM Clock */ +#define DT_CS 0x00000001 /* Serial ROM Chip Select */ + +#define MII_PREAMBLE 0xffffffff /* MII Management Preamble */ +#define MII_TEST 0xaaaaaaaa /* MII Test Signal */ +#define MII_STRD 0x06 /* Start of Frame+Op Code: use low nibble */ +#define MII_STWR 0x0a /* Start of Frame+Op Code: use low nibble */ + +#define MII_CR 0x00 /* MII Management Control Register */ +#define MII_SR 0x01 /* MII Management Status Register */ +#define MII_ID0 0x02 /* PHY Identifier Register 0 */ +#define MII_ID1 0x03 /* PHY Identifier Register 1 */ +#define MII_ANA 0x04 /* Auto Negotiation Advertisement */ +#define MII_ANLPA 0x05 /* Auto Negotiation Link Partner Ability */ +#define MII_ANE 0x06 /* Auto Negotiation Expansion */ +#define MII_ANP 0x07 /* Auto Negotiation Next Page TX */ + +#define DE4X5_MAX_MII 32 /* Maximum address of MII PHY devices */ + +/* +** MII Management Control Register +*/ +#define MII_CR_RST 0x8000 /* RESET the PHY chip */ +#define MII_CR_LPBK 0x4000 /* Loopback enable */ +#define MII_CR_SPD 0x2000 /* 0: 10Mb/s; 1: 100Mb/s */ +#define MII_CR_10 0x0000 /* Set 10Mb/s */ +#define MII_CR_100 0x2000 /* Set 100Mb/s */ +#define MII_CR_ASSE 0x1000 /* Auto Speed Select Enable */ +#define MII_CR_PD 0x0800 /* Power Down */ +#define MII_CR_ISOL 0x0400 /* Isolate Mode */ +#define MII_CR_RAN 0x0200 /* Restart Auto Negotiation */ +#define MII_CR_FDM 0x0100 /* Full Duplex Mode */ +#define MII_CR_CTE 0x0080 /* Collision Test Enable */ + +/* +** MII Management Status Register +*/ +#define MII_SR_T4C 0x8000 /* 100BASE-T4 capable */ +#define MII_SR_TXFD 0x4000 /* 100BASE-TX Full Duplex capable */ +#define MII_SR_TXHD 0x2000 /* 100BASE-TX Half Duplex capable */ +#define MII_SR_TFD 0x1000 /* 10BASE-T Full Duplex capable */ +#define MII_SR_THD 0x0800 /* 10BASE-T Half Duplex capable */ +#define MII_SR_ASSC 0x0020 /* Auto Speed Selection Complete*/ +#define MII_SR_RFD 0x0010 /* Remote Fault Detected */ +#define MII_SR_ANC 0x0008 /* Auto Negotiation capable */ +#define MII_SR_LKS 0x0004 /* Link Status */ +#define MII_SR_JABD 0x0002 /* Jabber Detect */ +#define MII_SR_XC 0x0001 /* Extended Capabilities */ + +/* +** MII Management Auto Negotiation Advertisement Register +*/ +#define MII_ANA_TAF 0x03e0 /* Technology Ability Field */ +#define MII_ANA_T4AM 0x0200 /* T4 Technology Ability Mask */ +#define MII_ANA_TXAM 0x0180 /* TX Technology Ability Mask */ +#define MII_ANA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */ +#define MII_ANA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */ +#define MII_ANA_100M 0x0380 /* 100Mb Technology Ability Mask */ +#define MII_ANA_10M 0x0060 /* 10Mb Technology Ability Mask */ +#define MII_ANA_CSMA 0x0001 /* CSMA-CD Capable */ + +/* +** MII Management Auto Negotiation Remote End Register +*/ +#define MII_ANLPA_NP 0x8000 /* Next Page (Enable) */ +#define MII_ANLPA_ACK 0x4000 /* Remote Acknowledge */ +#define MII_ANLPA_RF 0x2000 /* Remote Fault */ +#define MII_ANLPA_TAF 0x03e0 /* Technology Ability Field */ +#define MII_ANLPA_T4AM 0x0200 /* T4 Technology Ability Mask */ +#define MII_ANLPA_TXAM 0x0180 /* TX Technology Ability Mask */ +#define MII_ANLPA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */ +#define MII_ANLPA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */ +#define MII_ANLPA_100M 0x0380 /* 100Mb Technology Ability Mask */ +#define MII_ANLPA_10M 0x0060 /* 10Mb Technology Ability Mask */ +#define MII_ANLPA_CSMA 0x0001 /* CSMA-CD Capable */ + +/* +** SROM Media Definitions (ABG SROM Section) +*/ +#define MEDIA_NWAY 0x0080 /* Nway (Auto Negotiation) on PHY */ +#define MEDIA_MII 0x0040 /* MII Present on the adapter */ +#define MEDIA_FIBRE 0x0008 /* Fibre Media present */ +#define MEDIA_AUI 0x0004 /* AUI Media present */ +#define MEDIA_TP 0x0002 /* TP Media present */ +#define MEDIA_BNC 0x0001 /* BNC Media present */ + +/* +** SROM Definitions (Digital Semiconductor Format) +*/ +#define SROM_SSVID 0x0000 /* Sub-system Vendor ID offset */ +#define SROM_SSID 0x0002 /* Sub-system ID offset */ +#define SROM_CISPL 0x0004 /* CardBus CIS Pointer low offset */ +#define SROM_CISPH 0x0006 /* CardBus CIS Pointer high offset */ +#define SROM_IDCRC 0x0010 /* ID Block CRC offset*/ +#define SROM_RSVD2 0x0011 /* ID Reserved 2 offset */ +#define SROM_SFV 0x0012 /* SROM Format Version offset */ +#define SROM_CCNT 0x0013 /* Controller Count offset */ +#define SROM_HWADD 0x0014 /* Hardware Address offset */ +#define SROM_MRSVD 0x007c /* Manufacturer Reserved offset*/ +#define SROM_CRC 0x007e /* SROM CRC offset */ + +/* +** SROM Media Connection Definitions +*/ +#define SROM_10BT 0x0000 /* 10BASE-T half duplex */ +#define SROM_10BTN 0x0100 /* 10BASE-T with Nway */ +#define SROM_10BTF 0x0204 /* 10BASE-T full duplex */ +#define SROM_10BTNLP 0x0400 /* 10BASE-T without Link Pass test */ +#define SROM_10B2 0x0001 /* 10BASE-2 (BNC) */ +#define SROM_10B5 0x0002 /* 10BASE-5 (AUI) */ +#define SROM_100BTH 0x0003 /* 100BASE-T half duplex */ +#define SROM_100BTF 0x0205 /* 100BASE-T full duplex */ +#define SROM_100BT4 0x0006 /* 100BASE-T4 */ +#define SROM_100BFX 0x0007 /* 100BASE-FX half duplex (Fiber) */ +#define SROM_M10BT 0x0009 /* MII 10BASE-T half duplex */ +#define SROM_M10BTF 0x020a /* MII 10BASE-T full duplex */ +#define SROM_M100BT 0x000d /* MII 100BASE-T half duplex */ +#define SROM_M100BTF 0x020e /* MII 100BASE-T full duplex */ +#define SROM_M100BT4 0x000f /* MII 100BASE-T4 */ +#define SROM_M100BF 0x0010 /* MII 100BASE-FX half duplex */ +#define SROM_M100BFF 0x0211 /* MII 100BASE-FX full duplex */ +#define SROM_PDA 0x0800 /* Powerup & Dynamic Autosense */ +#define SROM_PAO 0x8800 /* Powerup Autosense Only */ +#define SROM_NSMI 0xffff /* No Selected Media Information */ + +/* +** SROM Media Definitions +*/ +#define SROM_10BASET 0x0000 /* 10BASE-T half duplex */ +#define SROM_10BASE2 0x0001 /* 10BASE-2 (BNC) */ +#define SROM_10BASE5 0x0002 /* 10BASE-5 (AUI) */ +#define SROM_100BASET 0x0003 /* 100BASE-T half duplex */ +#define SROM_10BASETF 0x0004 /* 10BASE-T full duplex */ +#define SROM_100BASETF 0x0005 /* 100BASE-T full duplex */ +#define SROM_100BASET4 0x0006 /* 100BASE-T4 */ +#define SROM_100BASEF 0x0007 /* 100BASE-FX half duplex */ +#define SROM_100BASEFF 0x0008 /* 100BASE-FX full duplex */ + +#define BLOCK_LEN 0x7f /* Extended blocks length mask */ +#define EXT_FIELD 0x40 /* Extended blocks extension field bit */ +#define MEDIA_CODE 0x3f /* Extended blocks media code mask */ + +/* +** SROM Compact Format Block Masks +*/ +#define COMPACT_FI 0x80 /* Format Indicator */ +#define COMPACT_LEN 0x04 /* Length */ +#define COMPACT_MC 0x3f /* Media Code */ + +/* +** SROM Extended Format Block Type 0 Masks +*/ +#define BLOCK0_FI 0x80 /* Format Indicator */ +#define BLOCK0_MCS 0x80 /* Media Code byte Sign */ +#define BLOCK0_MC 0x3f /* Media Code */ + +/* +** DC21040 Full Duplex Register (DE4X5_FDR) +*/ +#define FDR_FDACV 0x0000ffff /* Full Duplex Auto Configuration Value */ + +/* +** DC21041 General Purpose Timer Register (DE4X5_GPT) +*/ +#define GPT_CON 0x00010000 /* One shot: 0, Continuous: 1 */ +#define GPT_VAL 0x0000ffff /* Timer Value */ + +/* +** DC21140 General Purpose Register (DE4X5_GEP) (hardware dependent bits) +*/ +/* Valid ONLY for DE500 hardware */ +#define GEP_LNP 0x00000080 /* Link Pass (input) */ +#define GEP_SLNK 0x00000040 /* SYM LINK (input) */ +#define GEP_SDET 0x00000020 /* Signal Detect (input) */ +#define GEP_HRST 0x00000010 /* Hard RESET (to PHY) (output) */ +#define GEP_FDXD 0x00000008 /* Full Duplex Disable (output) */ +#define GEP_PHYL 0x00000004 /* PHY Loopback (output) */ +#define GEP_FLED 0x00000002 /* Force Activity LED on (output) */ +#define GEP_MODE 0x00000001 /* 0: 10Mb/s, 1: 100Mb/s */ +#define GEP_INIT 0x0000011f /* Setup inputs (0) and outputs (1) */ +#define GEP_CTRL 0x00000100 /* GEP control bit */ + +/* +** SIA Register Defaults +*/ +#define CSR13 0x00000001 +#define CSR14 0x0003ff7f /* Autonegotiation disabled */ +#define CSR15 0x00000008 + +/* +** SIA Status Register (DE4X5_SISR) +*/ +#define SISR_LPC 0xffff0000 /* Link Partner's Code Word */ +#define SISR_LPN 0x00008000 /* Link Partner Negotiable */ +#define SISR_ANS 0x00007000 /* Auto Negotiation Arbitration State */ +#define SISR_NSN 0x00000800 /* Non Stable NLPs Detected (DC21041) */ +#define SISR_TRF 0x00000800 /* Transmit Remote Fault */ +#define SISR_NSND 0x00000400 /* Non Stable NLPs Detected (DC21142) */ +#define SISR_ANR_FDS 0x00000400 /* Auto Negotiate Restart/Full Duplex Sel.*/ +#define SISR_TRA 0x00000200 /* 10BASE-T Receive Port Activity */ +#define SISR_NRA 0x00000200 /* Non Selected Port Receive Activity */ +#define SISR_ARA 0x00000100 /* AUI Receive Port Activity */ +#define SISR_SRA 0x00000100 /* Selected Port Receive Activity */ +#define SISR_DAO 0x00000080 /* PLL All One */ +#define SISR_DAZ 0x00000040 /* PLL All Zero */ +#define SISR_DSP 0x00000020 /* PLL Self-Test Pass */ +#define SISR_DSD 0x00000010 /* PLL Self-Test Done */ +#define SISR_APS 0x00000008 /* Auto Polarity State */ +#define SISR_LKF 0x00000004 /* Link Fail Status */ +#define SISR_LS10 0x00000004 /* 10Mb/s Link Fail Status */ +#define SISR_NCR 0x00000002 /* Network Connection Error */ +#define SISR_LS100 0x00000002 /* 100Mb/s Link Fail Status */ +#define SISR_PAUI 0x00000001 /* AUI_TP Indication */ +#define SISR_MRA 0x00000001 /* MII Receive Port Activity */ + +#define ANS_NDIS 0x00000000 /* Nway disable */ +#define ANS_TDIS 0x00001000 /* Transmit Disable */ +#define ANS_ADET 0x00002000 /* Ability Detect */ +#define ANS_ACK 0x00003000 /* Acknowledge */ +#define ANS_CACK 0x00004000 /* Complete Acknowledge */ +#define ANS_NWOK 0x00005000 /* Nway OK - FLP Link Good */ +#define ANS_LCHK 0x00006000 /* Link Check */ + +#define SISR_RST 0x00000301 /* CSR12 reset */ +#define SISR_ANR 0x00001301 /* Autonegotiation restart */ + +/* +** SIA Connectivity Register (DE4X5_SICR) +*/ +#define SICR_SDM 0xffff0000 /* SIA Diagnostics Mode */ +#define SICR_OE57 0x00008000 /* Output Enable 5 6 7 */ +#define SICR_OE24 0x00004000 /* Output Enable 2 4 */ +#define SICR_OE13 0x00002000 /* Output Enable 1 3 */ +#define SICR_IE 0x00001000 /* Input Enable */ +#define SICR_EXT 0x00000000 /* SIA MUX Select External SIA Mode */ +#define SICR_D_SIA 0x00000400 /* SIA MUX Select Diagnostics - SIA Sigs */ +#define SICR_DPLL 0x00000800 /* SIA MUX Select Diagnostics - DPLL Sigs*/ +#define SICR_APLL 0x00000a00 /* SIA MUX Select Diagnostics - DPLL Sigs*/ +#define SICR_D_RxM 0x00000c00 /* SIA MUX Select Diagnostics - RxM Sigs */ +#define SICR_M_RxM 0x00000d00 /* SIA MUX Select Diagnostics - RxM Sigs */ +#define SICR_LNKT 0x00000e00 /* SIA MUX Select Diagnostics - Link Test*/ +#define SICR_SEL 0x00000f00 /* SIA MUX Select AUI or TP with LEDs */ +#define SICR_ASE 0x00000080 /* APLL Start Enable*/ +#define SICR_SIM 0x00000040 /* Serial Interface Input Multiplexer */ +#define SICR_ENI 0x00000020 /* Encoder Input Multiplexer */ +#define SICR_EDP 0x00000010 /* SIA PLL External Input Enable */ +#define SICR_AUI 0x00000008 /* 10Base-T (0) or AUI (1) */ +#define SICR_CAC 0x00000004 /* CSR Auto Configuration */ +#define SICR_PS 0x00000002 /* Pin AUI/TP Selection */ +#define SICR_SRL 0x00000001 /* SIA Reset */ +#define SIA_RESET 0x00000000 /* SIA Reset Value */ + +/* +** SIA Transmit and Receive Register (DE4X5_STRR) +*/ +#define STRR_TAS 0x00008000 /* 10Base-T/AUI Autosensing Enable */ +#define STRR_SPP 0x00004000 /* Set Polarity Plus */ +#define STRR_APE 0x00002000 /* Auto Polarity Enable */ +#define STRR_LTE 0x00001000 /* Link Test Enable */ +#define STRR_SQE 0x00000800 /* Signal Quality Enable */ +#define STRR_CLD 0x00000400 /* Collision Detect Enable */ +#define STRR_CSQ 0x00000200 /* Collision Squelch Enable */ +#define STRR_RSQ 0x00000100 /* Receive Squelch Enable */ +#define STRR_ANE 0x00000080 /* Auto Negotiate Enable */ +#define STRR_HDE 0x00000040 /* Half Duplex Enable */ +#define STRR_CPEN 0x00000030 /* Compensation Enable */ +#define STRR_LSE 0x00000008 /* Link Pulse Send Enable */ +#define STRR_DREN 0x00000004 /* Driver Enable */ +#define STRR_LBK 0x00000002 /* Loopback Enable */ +#define STRR_ECEN 0x00000001 /* Encoder Enable */ +#define STRR_RESET 0xffffffff /* Reset value for STRR */ + +/* +** SIA General Register (DE4X5_SIGR) +*/ +#define SIGR_RMI 0x40000000 /* Receive Match Interrupt */ +#define SIGR_GI1 0x20000000 /* General Port Interrupt 1 */ +#define SIGR_GI0 0x10000000 /* General Port Interrupt 0 */ +#define SIGR_CWE 0x08000000 /* Control Write Enable */ +#define SIGR_RME 0x04000000 /* Receive Match Enable */ +#define SIGR_GEI1 0x02000000 /* GEP Interrupt Enable on Port 1 */ +#define SIGR_GEI0 0x01000000 /* GEP Interrupt Enable on Port 0 */ +#define SIGR_LGS3 0x00800000 /* LED/GEP3 Select */ +#define SIGR_LGS2 0x00400000 /* LED/GEP2 Select */ +#define SIGR_LGS1 0x00200000 /* LED/GEP1 Select */ +#define SIGR_LGS0 0x00100000 /* LED/GEP0 Select */ +#define SIGR_MD 0x000f0000 /* General Purpose Mode and Data */ +#define SIGR_LV2 0x00008000 /* General Purpose LED2 value */ +#define SIGR_LE2 0x00004000 /* General Purpose LED2 enable */ +#define SIGR_FRL 0x00002000 /* Force Receiver Low */ +#define SIGR_DPST 0x00001000 /* PLL Self Test Start */ +#define SIGR_LSD 0x00000800 /* LED Stretch Disable */ +#define SIGR_FLF 0x00000400 /* Force Link Fail */ +#define SIGR_FUSQ 0x00000200 /* Force Unsquelch */ +#define SIGR_TSCK 0x00000100 /* Test Clock */ +#define SIGR_LV1 0x00000080 /* General Purpose LED1 value */ +#define SIGR_LE1 0x00000040 /* General Purpose LED1 enable */ +#define SIGR_RWR 0x00000020 /* Receive Watchdog Release */ +#define SIGR_RWD 0x00000010 /* Receive Watchdog Disable */ +#define SIGR_ABM 0x00000008 /* BNC: 0, AUI:1 */ +#define SIGR_JCK 0x00000004 /* Jabber Clock */ +#define SIGR_HUJ 0x00000002 /* Host Unjab */ +#define SIGR_JBD 0x00000001 /* Jabber Disable */ +#define SIGR_RESET 0xffff0000 /* Reset value for SIGR */ + +/* +** Receive Descriptor Bit Summary +*/ +#define R_OWN 0x80000000 /* Own Bit */ +#define RD_FF 0x40000000 /* Filtering Fail */ +#define RD_FL 0x3fff0000 /* Frame Length */ +#define RD_ES 0x00008000 /* Error Summary */ +#define RD_LE 0x00004000 /* Length Error */ +#define RD_DT 0x00003000 /* Data Type */ +#define RD_RF 0x00000800 /* Runt Frame */ +#define RD_MF 0x00000400 /* Multicast Frame */ +#define RD_FS 0x00000200 /* First Descriptor */ +#define RD_LS 0x00000100 /* Last Descriptor */ +#define RD_TL 0x00000080 /* Frame Too Long */ +#define RD_CS 0x00000040 /* Collision Seen */ +#define RD_FT 0x00000020 /* Frame Type */ +#define RD_RJ 0x00000010 /* Receive Watchdog */ +#define RD_RE 0x00000008 /* Report on MII Error */ +#define RD_DB 0x00000004 /* Dribbling Bit */ +#define RD_CE 0x00000002 /* CRC Error */ +#define RD_OF 0x00000001 /* Overflow */ + +#define RD_RER 0x02000000 /* Receive End Of Ring */ +#define RD_RCH 0x01000000 /* Second Address Chained */ +#define RD_RBS2 0x003ff800 /* Buffer 2 Size */ +#define RD_RBS1 0x000007ff /* Buffer 1 Size */ + +/* +** Transmit Descriptor Bit Summary +*/ +#define T_OWN 0x80000000 /* Own Bit */ +#define TD_ES 0x00008000 /* Error Summary */ +#define TD_TO 0x00004000 /* Transmit Jabber Time-Out */ +#define TD_LO 0x00000800 /* Loss Of Carrier */ +#define TD_NC 0x00000400 /* No Carrier */ +#define TD_LC 0x00000200 /* Late Collision */ +#define TD_EC 0x00000100 /* Excessive Collisions */ +#define TD_HF 0x00000080 /* Heartbeat Fail */ +#define TD_CC 0x00000078 /* Collision Counter */ +#define TD_LF 0x00000004 /* Link Fail */ +#define TD_UF 0x00000002 /* Underflow Error */ +#define TD_DE 0x00000001 /* Deferred */ + +#define TD_IC 0x80000000 /* Interrupt On Completion */ +#define TD_LS 0x40000000 /* Last Segment */ +#define TD_FS 0x20000000 /* First Segment */ +#define TD_FT1 0x10000000 /* Filtering Type */ +#define TD_SET 0x08000000 /* Setup Packet */ +#define TD_AC 0x04000000 /* Add CRC Disable */ +#define TD_TER 0x02000000 /* Transmit End Of Ring */ +#define TD_TCH 0x01000000 /* Second Address Chained */ +#define TD_DPD 0x00800000 /* Disabled Padding */ +#define TD_FT0 0x00400000 /* Filtering Type */ +#define TD_TBS2 0x003ff800 /* Buffer 2 Size */ +#define TD_TBS1 0x000007ff /* Buffer 1 Size */ + +#define PERFECT_F 0x00000000 +#define HASH_F TD_FT0 +#define INVERSE_F TD_FT1 +#define HASH_O_F (TD_FT1 | TD_F0) + +/* +** Media / mode state machine definitions +** User selectable: +*/ +#define TP 0x0040 /* 10Base-T (now equiv to _10Mb) */ +#define TP_NW 0x0002 /* 10Base-T with Nway */ +#define BNC 0x0004 /* Thinwire */ +#define AUI 0x0008 /* Thickwire */ +#define BNC_AUI 0x0010 /* BNC/AUI on DC21040 indistinguishable */ +#define _10Mb 0x0040 /* 10Mb/s Ethernet */ +#define _100Mb 0x0080 /* 100Mb/s Ethernet */ +#define AUTO 0x4000 /* Auto sense the media or speed */ + +/* +** Internal states +*/ +#define NC 0x0000 /* No Connection */ +#define ANS 0x0020 /* Intermediate AutoNegotiation State */ +#define SPD_DET 0x0100 /* Parallel speed detection */ +#define INIT 0x0200 /* Initial state */ +#define EXT_SIA 0x0400 /* External SIA for motherboard chip */ +#define ANS_SUSPECT 0x0802 /* Suspect the ANS (TP) port is down */ +#define TP_SUSPECT 0x0803 /* Suspect the TP port is down */ +#define BNC_AUI_SUSPECT 0x0804 /* Suspect the BNC or AUI port is down */ +#define EXT_SIA_SUSPECT 0x0805 /* Suspect the EXT SIA port is down */ +#define BNC_SUSPECT 0x0806 /* Suspect the BNC port is down */ +#define AUI_SUSPECT 0x0807 /* Suspect the AUI port is down */ +#define MII 0x1000 /* MII on the 21143 */ + +#define TIMER_CB 0x80000000 /* Timer callback detection */ + +/* +** DE4X5 DEBUG Options +*/ +#define DEBUG_NONE 0x0000 /* No DEBUG messages */ +#define DEBUG_VERSION 0x0001 /* Print version message */ +#define DEBUG_MEDIA 0x0002 /* Print media messages */ +#define DEBUG_TX 0x0004 /* Print TX (queue_pkt) messages */ +#define DEBUG_RX 0x0008 /* Print RX (de4x5_rx) messages */ +#define DEBUG_SROM 0x0010 /* Print SROM messages */ +#define DEBUG_MII 0x0020 /* Print MII messages */ +#define DEBUG_OPEN 0x0040 /* Print de4x5_open() messages */ +#define DEBUG_CLOSE 0x0080 /* Print de4x5_close() messages */ +#define DEBUG_PCICFG 0x0100 +#define DEBUG_ALL 0x01ff + +/* +** Miscellaneous +*/ +#define PCI 0 +#define EISA 1 + +#define HASH_TABLE_LEN 512 /* Bits */ +#define HASH_BITS 0x01ff /* 9 LS bits */ + +#define SETUP_FRAME_LEN 192 /* Bytes */ +#define IMPERF_PA_OFFSET 156 /* Bytes */ + +#define POLL_DEMAND 1 + +#define LOST_MEDIA_THRESHOLD 3 + +#define MASK_INTERRUPTS 1 +#define UNMASK_INTERRUPTS 0 + +#define DE4X5_STRLEN 8 + +#define DE4X5_INIT 0 /* Initialisation time */ +#define DE4X5_RUN 1 /* Run time */ + +#define DE4X5_SAVE_STATE 0 +#define DE4X5_RESTORE_STATE 1 + +/* +** Address Filtering Modes +*/ +#define PERFECT 0 /* 16 perfect physical addresses */ +#define HASH_PERF 1 /* 1 perfect, 512 multicast addresses */ +#define PERFECT_REJ 2 /* Reject 16 perfect physical addresses */ +#define ALL_HASH 3 /* Hashes all physical & multicast addrs */ + +#define ALL 0 /* Clear out all the setup frame */ +#define PHYS_ADDR_ONLY 1 /* Update the physical address only */ + +/* +** Adapter state +*/ +#define INITIALISED 0 /* After h/w initialised and mem alloc'd */ +#define CLOSED 1 /* Ready for opening */ +#define OPEN 2 /* Running */ + +/* +** Various wait times +*/ +#define PDET_LINK_WAIT 1200 /* msecs to wait for link detect bits */ +#define ANS_FINISH_WAIT 1000 /* msecs to wait for link detect bits */ + +/* +** IEEE OUIs for various PHY vendor/chip combos - Reg 2 values only. Since +** the vendors seem split 50-50 on how to calculate the OUI register values +** anyway, just reading Reg2 seems reasonable for now [see de4x5_get_oui()]. +*/ +#define NATIONAL_TX 0x2000 +#define BROADCOM_T4 0x03e0 +#define SEEQ_T4 0x0016 +#define CYPRESS_T4 0x0014 + +/* +** Speed Selection stuff +*/ +#define SET_10Mb {\ + if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\ + omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\ + if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\ + mii_wr(MII_CR_10|(lp->fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\ + }\ + omr |= ((lp->fdx ? OMR_FDX : 0) | OMR_TTM);\ + outl(omr, DE4X5_OMR);\ + if (!lp->useSROM) lp->cache.gep = 0;\ + } else if (lp->useSROM && !lp->useMII) {\ + omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ + omr |= (lp->fdx ? OMR_FDX : 0);\ + outl(omr | (lp->infoblock_csr6 & ~(OMR_SCR | OMR_HBD)), DE4X5_OMR);\ + } else {\ + omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ + omr |= (lp->fdx ? OMR_FDX : 0);\ + outl(omr | OMR_SDP | OMR_TTM, DE4X5_OMR);\ + lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD);\ + gep_wr(lp->cache.gep, dev);\ + }\ +} + +#define SET_100Mb {\ + if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\ + int fdx=0;\ + if (lp->phy[lp->active].id == NATIONAL_TX) {\ + mii_wr(mii_rd(0x18, lp->phy[lp->active].addr, DE4X5_MII) & ~0x2000,\ + 0x18, lp->phy[lp->active].addr, DE4X5_MII);\ + }\ + omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\ + sr = mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);\ + if (!(sr & MII_ANA_T4AM) && lp->fdx) fdx=1;\ + if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\ + mii_wr(MII_CR_100|(fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\ + }\ + if (fdx) omr |= OMR_FDX;\ + outl(omr, DE4X5_OMR);\ + if (!lp->useSROM) lp->cache.gep = 0;\ + } else if (lp->useSROM && !lp->useMII) {\ + omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ + omr |= (lp->fdx ? OMR_FDX : 0);\ + outl(omr | lp->infoblock_csr6, DE4X5_OMR);\ + } else {\ + omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ + omr |= (lp->fdx ? OMR_FDX : 0);\ + outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\ + lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD) | GEP_MODE;\ + gep_wr(lp->cache.gep, dev);\ + }\ +} + +/* FIX ME so I don't jam 10Mb networks */ +#define SET_100Mb_PDET {\ + if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\ + mii_wr(MII_CR_100|MII_CR_ASSE, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\ + omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ + outl(omr, DE4X5_OMR);\ + } else if (lp->useSROM && !lp->useMII) {\ + omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ + outl(omr, DE4X5_OMR);\ + } else {\ + omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\ + outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS, DE4X5_OMR);\ + lp->cache.gep = (GEP_FDXD | GEP_MODE);\ + gep_wr(lp->cache.gep, dev);\ + }\ +} + +/* +** Include the IOCTL stuff +*/ +#include <linux/sockios.h> + +#define DE4X5IOCTL SIOCDEVPRIVATE + +struct de4x5_ioctl { + unsigned short cmd; /* Command to run */ + unsigned short len; /* Length of the data buffer */ + unsigned char __user *data; /* Pointer to the data buffer */ +}; + +/* +** Recognised commands for the driver +*/ +#define DE4X5_GET_HWADDR 0x01 /* Get the hardware address */ +#define DE4X5_SET_HWADDR 0x02 /* Set the hardware address */ +/* 0x03 and 0x04 were used before and are obsoleted now. Don't use them. */ +#define DE4X5_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ +#define DE4X5_GET_MCA 0x06 /* Get a multicast address */ +#define DE4X5_SET_MCA 0x07 /* Set a multicast address */ +#define DE4X5_CLR_MCA 0x08 /* Clear a multicast address */ +#define DE4X5_MCA_EN 0x09 /* Enable a multicast address group */ +#define DE4X5_GET_STATS 0x0a /* Get the driver statistics */ +#define DE4X5_CLR_STATS 0x0b /* Zero out the driver statistics */ +#define DE4X5_GET_OMR 0x0c /* Get the OMR Register contents */ +#define DE4X5_SET_OMR 0x0d /* Set the OMR Register contents */ +#define DE4X5_GET_REG 0x0e /* Get the DE4X5 Registers */ + +#define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32(dev->dev_addr) & 0x00ffffff) == 0x3e0008) diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c new file mode 100644 index 00000000000..9a21ca3873f --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/dmfe.c @@ -0,0 +1,2253 @@ +/* + A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast + ethernet driver for Linux. + Copyright (C) 1997 Sten Wang + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + DAVICOM Web-Site: www.davicom.com.tw + + Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw + Maintainer: Tobias Ringstrom <tori@unhappy.mine.nu> + + (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. + + Marcelo Tosatti <marcelo@conectiva.com.br> : + Made it compile in 2.3 (device to net_device) + + Alan Cox <alan@lxorguk.ukuu.org.uk> : + Cleaned up for kernel merge. + Removed the back compatibility support + Reformatted, fixing spelling etc as I went + Removed IRQ 0-15 assumption + + Jeff Garzik <jgarzik@pobox.com> : + Updated to use new PCI driver API. + Resource usage cleanups. + Report driver version to user. + + Tobias Ringstrom <tori@unhappy.mine.nu> : + Cleaned up and added SMP safety. Thanks go to Jeff Garzik, + Andrew Morton and Frank Davis for the SMP safety fixes. + + Vojtech Pavlik <vojtech@suse.cz> : + Cleaned up pointer arithmetics. + Fixed a lot of 64bit issues. + Cleaned up printk()s a bit. + Fixed some obvious big endian problems. + + Tobias Ringstrom <tori@unhappy.mine.nu> : + Use time_after for jiffies calculation. Added ethtool + support. Updated PCI resource allocation. Do not + forget to unmap PCI mapped skbs. + + Alan Cox <alan@lxorguk.ukuu.org.uk> + Added new PCI identifiers provided by Clear Zhang at ALi + for their 1563 ethernet device. + + TODO + + Check on 64 bit boxes. + Check and fix on big endian boxes. + + Test and make sure PCI latency is now correct for all cases. +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "dmfe" +#define DRV_VERSION "1.36.4" +#define DRV_RELDATE "2002-01-17" + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/crc32.h> +#include <linux/bitops.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> +#include <asm/irq.h> + +#ifdef CONFIG_TULIP_DM910X +#include <linux/of.h> +#endif + + +/* Board/System/Debug information/definition ---------------- */ +#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */ +#define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */ +#define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */ +#define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */ + +#define DM9102_IO_SIZE 0x80 +#define DM9102A_IO_SIZE 0x100 +#define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */ +#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */ +#define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */ +#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ +#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ +#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) +#define TX_BUF_ALLOC 0x600 +#define RX_ALLOC_SIZE 0x620 +#define DM910X_RESET 1 +#define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */ +#define CR6_DEFAULT 0x00080000 /* HD */ +#define CR7_DEFAULT 0x180c1 +#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ +#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ +#define MAX_PACKET_SIZE 1514 +#define DMFE_MAX_MULTICAST 14 +#define RX_COPY_SIZE 100 +#define MAX_CHECK_PACKET 0x8000 +#define DM9801_NOISE_FLOOR 8 +#define DM9802_NOISE_FLOOR 5 + +#define DMFE_WOL_LINKCHANGE 0x20000000 +#define DMFE_WOL_SAMPLEPACKET 0x10000000 +#define DMFE_WOL_MAGICPACKET 0x08000000 + + +#define DMFE_10MHF 0 +#define DMFE_100MHF 1 +#define DMFE_10MFD 4 +#define DMFE_100MFD 5 +#define DMFE_AUTO 8 +#define DMFE_1M_HPNA 0x10 + +#define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */ +#define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */ +#define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */ +#define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */ +#define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */ +#define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */ + +#define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ +#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */ +#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */ + +#define DMFE_DBUG(dbug_now, msg, value) \ + do { \ + if (dmfe_debug || (dbug_now)) \ + pr_err("%s %lx\n", \ + (msg), (long) (value)); \ + } while (0) + +#define SHOW_MEDIA_TYPE(mode) \ + pr_info("Change Speed to %sMhz %s duplex\n" , \ + (mode & 1) ? "100":"10", \ + (mode & 4) ? "full":"half"); + + +/* CR9 definition: SROM/MII */ +#define CR9_SROM_READ 0x4800 +#define CR9_SRCS 0x1 +#define CR9_SRCLK 0x2 +#define CR9_CRDOUT 0x8 +#define SROM_DATA_0 0x0 +#define SROM_DATA_1 0x4 +#define PHY_DATA_1 0x20000 +#define PHY_DATA_0 0x00000 +#define MDCLKH 0x10000 + +#define PHY_POWER_DOWN 0x800 + +#define SROM_V41_CODE 0x14 + +#define SROM_CLK_WRITE(data, ioaddr) \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); + +#define __CHK_IO_SIZE(pci_id, dev_rev) \ + (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \ + DM9102A_IO_SIZE: DM9102_IO_SIZE) + +#define CHK_IO_SIZE(pci_dev) \ + (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \ + (pci_dev)->revision)) + +/* Sten Check */ +#define DEVICE net_device + +/* Structure/enum declaration ------------------------------- */ +struct tx_desc { + __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ + char *tx_buf_ptr; /* Data for us */ + struct tx_desc *next_tx_desc; +} __attribute__(( aligned(32) )); + +struct rx_desc { + __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ + struct sk_buff *rx_skb_ptr; /* Data for us */ + struct rx_desc *next_rx_desc; +} __attribute__(( aligned(32) )); + +struct dmfe_board_info { + u32 chip_id; /* Chip vendor/Device ID */ + u8 chip_revision; /* Chip revision */ + struct DEVICE *next_dev; /* next device */ + struct pci_dev *pdev; /* PCI device */ + spinlock_t lock; + + long ioaddr; /* I/O base address */ + u32 cr0_data; + u32 cr5_data; + u32 cr6_data; + u32 cr7_data; + u32 cr15_data; + + /* pointer for memory physical address */ + dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ + dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ + dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ + dma_addr_t first_tx_desc_dma; + dma_addr_t first_rx_desc_dma; + + /* descriptor pointer */ + unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ + unsigned char *buf_pool_start; /* Tx buffer pool align dword */ + unsigned char *desc_pool_ptr; /* descriptor pool memory */ + struct tx_desc *first_tx_desc; + struct tx_desc *tx_insert_ptr; + struct tx_desc *tx_remove_ptr; + struct rx_desc *first_rx_desc; + struct rx_desc *rx_insert_ptr; + struct rx_desc *rx_ready_ptr; /* packet come pointer */ + unsigned long tx_packet_cnt; /* transmitted packet count */ + unsigned long tx_queue_cnt; /* wait to send packet count */ + unsigned long rx_avail_cnt; /* available rx descriptor count */ + unsigned long interval_rx_cnt; /* rx packet count a callback time */ + + u16 HPNA_command; /* For HPNA register 16 */ + u16 HPNA_timer; /* For HPNA remote device check */ + u16 dbug_cnt; + u16 NIC_capability; /* NIC media capability */ + u16 PHY_reg4; /* Saved Phyxcer register 4 value */ + + u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */ + u8 chip_type; /* Keep DM9102A chip type */ + u8 media_mode; /* user specify media mode */ + u8 op_mode; /* real work media mode */ + u8 phy_addr; + u8 wait_reset; /* Hardware failed, need to reset */ + u8 dm910x_chk_mode; /* Operating mode check */ + u8 first_in_callback; /* Flag to record state */ + u8 wol_mode; /* user WOL settings */ + struct timer_list timer; + + /* Driver defined statistic counter */ + unsigned long tx_fifo_underrun; + unsigned long tx_loss_carrier; + unsigned long tx_no_carrier; + unsigned long tx_late_collision; + unsigned long tx_excessive_collision; + unsigned long tx_jabber_timeout; + unsigned long reset_count; + unsigned long reset_cr8; + unsigned long reset_fatal; + unsigned long reset_TXtimeout; + + /* NIC SROM data */ + unsigned char srom[128]; +}; + +enum dmfe_offsets { + DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, + DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, + DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, + DCR15 = 0x78 +}; + +enum dmfe_CR6_bits { + CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, + CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, + CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 +}; + +/* Global variable declaration ----------------------------- */ +static int __devinitdata printed_version; +static const char version[] __devinitconst = + "Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")"; + +static int dmfe_debug; +static unsigned char dmfe_media_mode = DMFE_AUTO; +static u32 dmfe_cr6_user_set; + +/* For module input parameter */ +static int debug; +static u32 cr6set; +static unsigned char mode = 8; +static u8 chkmode = 1; +static u8 HPNA_mode; /* Default: Low Power/High Speed */ +static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */ +static u8 HPNA_tx_cmd; /* Default: Don't issue remote command */ +static u8 HPNA_NoiseFloor; /* Default: HPNA NoiseFloor */ +static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control + 4: TX pause packet */ + + +/* function declaration ------------------------------------- */ +static int dmfe_open(struct DEVICE *); +static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *); +static int dmfe_stop(struct DEVICE *); +static void dmfe_set_filter_mode(struct DEVICE *); +static const struct ethtool_ops netdev_ethtool_ops; +static u16 read_srom_word(long ,int); +static irqreturn_t dmfe_interrupt(int , void *); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void poll_dmfe (struct net_device *dev); +#endif +static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long); +static void allocate_rx_buffer(struct dmfe_board_info *); +static void update_cr6(u32, unsigned long); +static void send_filter_frame(struct DEVICE *); +static void dm9132_id_table(struct DEVICE *); +static u16 phy_read(unsigned long, u8, u8, u32); +static void phy_write(unsigned long, u8, u8, u16, u32); +static void phy_write_1bit(unsigned long, u32); +static u16 phy_read_1bit(unsigned long); +static u8 dmfe_sense_speed(struct dmfe_board_info *); +static void dmfe_process_mode(struct dmfe_board_info *); +static void dmfe_timer(unsigned long); +static inline u32 cal_CRC(unsigned char *, unsigned int, u8); +static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *); +static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *); +static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *); +static void dmfe_dynamic_reset(struct DEVICE *); +static void dmfe_free_rxbuffer(struct dmfe_board_info *); +static void dmfe_init_dm910x(struct DEVICE *); +static void dmfe_parse_srom(struct dmfe_board_info *); +static void dmfe_program_DM9801(struct dmfe_board_info *, int); +static void dmfe_program_DM9802(struct dmfe_board_info *); +static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * ); +static void dmfe_set_phyxcer(struct dmfe_board_info *); + +/* DM910X network board routine ---------------------------- */ + +static const struct net_device_ops netdev_ops = { + .ndo_open = dmfe_open, + .ndo_stop = dmfe_stop, + .ndo_start_xmit = dmfe_start_xmit, + .ndo_set_multicast_list = dmfe_set_filter_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_dmfe, +#endif +}; + +/* + * Search DM910X board ,allocate space and register it + */ + +static int __devinit dmfe_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dmfe_board_info *db; /* board information structure */ + struct net_device *dev; + u32 pci_pmr; + int i, err; + + DMFE_DBUG(0, "dmfe_init_one()", 0); + + if (!printed_version++) + pr_info("%s\n", version); + + /* + * SPARC on-board DM910x chips should be handled by the main + * tulip driver, except for early DM9100s. + */ +#ifdef CONFIG_TULIP_DM910X + if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) || + ent->driver_data == PCI_DM9102_ID) { + struct device_node *dp = pci_device_to_OF_node(pdev); + + if (dp && of_get_property(dp, "local-mac-address", NULL)) { + pr_info("skipping on-board DM910x (use tulip)\n"); + return -ENODEV; + } + } +#endif + + /* Init network device */ + dev = alloc_etherdev(sizeof(*db)); + if (dev == NULL) + return -ENOMEM; + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + pr_warn("32-bit PCI DMA not available\n"); + err = -ENODEV; + goto err_out_free; + } + + /* Enable Master/IO access, Disable memory access */ + err = pci_enable_device(pdev); + if (err) + goto err_out_free; + + if (!pci_resource_start(pdev, 0)) { + pr_err("I/O base is zero\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) { + pr_err("Allocated I/O size too small\n"); + err = -ENODEV; + goto err_out_disable; + } + +#if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */ + + /* Set Latency Timer 80h */ + /* FIXME: setting values > 32 breaks some SiS 559x stuff. + Need a PCI quirk.. */ + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); +#endif + + if (pci_request_regions(pdev, DRV_NAME)) { + pr_err("Failed to request PCI regions\n"); + err = -ENODEV; + goto err_out_disable; + } + + /* Init system & device */ + db = netdev_priv(dev); + + /* Allocate Tx/Rx descriptor memory */ + db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + if (!db->desc_pool_ptr) + goto err_out_res; + + db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * + TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + if (!db->buf_pool_ptr) + goto err_out_free_desc; + + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; + db->first_tx_desc_dma = db->desc_pool_dma_ptr; + db->buf_pool_start = db->buf_pool_ptr; + db->buf_pool_dma_start = db->buf_pool_dma_ptr; + + db->chip_id = ent->driver_data; + db->ioaddr = pci_resource_start(pdev, 0); + db->chip_revision = pdev->revision; + db->wol_mode = 0; + + db->pdev = pdev; + + dev->base_addr = db->ioaddr; + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + dev->netdev_ops = &netdev_ops; + dev->ethtool_ops = &netdev_ethtool_ops; + netif_carrier_off(dev); + spin_lock_init(&db->lock); + + pci_read_config_dword(pdev, 0x50, &pci_pmr); + pci_pmr &= 0x70000; + if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) ) + db->chip_type = 1; /* DM9102A E3 */ + else + db->chip_type = 0; + + /* read 64 word srom data */ + for (i = 0; i < 64; i++) + ((__le16 *) db->srom)[i] = + cpu_to_le16(read_srom_word(db->ioaddr, i)); + + /* Set Node address */ + for (i = 0; i < 6; i++) + dev->dev_addr[i] = db->srom[20 + i]; + + err = register_netdev (dev); + if (err) + goto err_out_free_buf; + + dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n", + ent->driver_data >> 16, + pci_name(pdev), dev->dev_addr, dev->irq); + + pci_set_master(pdev); + + return 0; + +err_out_free_buf: + pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); +err_out_free_desc: + pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, + db->desc_pool_ptr, db->desc_pool_dma_ptr); +err_out_res: + pci_release_regions(pdev); +err_out_disable: + pci_disable_device(pdev); +err_out_free: + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + return err; +} + + +static void __devexit dmfe_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct dmfe_board_info *db = netdev_priv(dev); + + DMFE_DBUG(0, "dmfe_remove_one()", 0); + + if (dev) { + + unregister_netdev(dev); + + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + + pci_set_drvdata(pdev, NULL); + } + + DMFE_DBUG(0, "dmfe_remove_one() exit", 0); +} + + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ + +static int dmfe_open(struct DEVICE *dev) +{ + int ret; + struct dmfe_board_info *db = netdev_priv(dev); + + DMFE_DBUG(0, "dmfe_open", 0); + + ret = request_irq(dev->irq, dmfe_interrupt, + IRQF_SHARED, dev->name, dev); + if (ret) + return ret; + + /* system variable init */ + db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set; + db->tx_packet_cnt = 0; + db->tx_queue_cnt = 0; + db->rx_avail_cnt = 0; + db->wait_reset = 0; + + db->first_in_callback = 0; + db->NIC_capability = 0xf; /* All capability*/ + db->PHY_reg4 = 0x1e0; + + /* CR6 operation mode decision */ + if ( !chkmode || (db->chip_id == PCI_DM9132_ID) || + (db->chip_revision >= 0x30) ) { + db->cr6_data |= DMFE_TXTH_256; + db->cr0_data = CR0_DEFAULT; + db->dm910x_chk_mode=4; /* Enter the normal mode */ + } else { + db->cr6_data |= CR6_SFT; /* Store & Forward mode */ + db->cr0_data = 0; + db->dm910x_chk_mode = 1; /* Enter the check mode */ + } + + /* Initialize DM910X board */ + dmfe_init_dm910x(dev); + + /* Active System Interface */ + netif_wake_queue(dev); + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = DMFE_TIMER_WUT + HZ * 2; + db->timer.data = (unsigned long)dev; + db->timer.function = dmfe_timer; + add_timer(&db->timer); + + return 0; +} + + +/* Initialize DM910X board + * Reset DM910X board + * Initialize TX/Rx descriptor chain structure + * Send the set-up frame + * Enable Tx/Rx machine + */ + +static void dmfe_init_dm910x(struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long ioaddr = db->ioaddr; + + DMFE_DBUG(0, "dmfe_init_dm910x()", 0); + + /* Reset DM910x MAC controller */ + outl(DM910X_RESET, ioaddr + DCR0); /* RESET MAC */ + udelay(100); + outl(db->cr0_data, ioaddr + DCR0); + udelay(5); + + /* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */ + db->phy_addr = 1; + + /* Parser SROM and media mode */ + dmfe_parse_srom(db); + db->media_mode = dmfe_media_mode; + + /* RESET Phyxcer Chip by GPR port bit 7 */ + outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */ + if (db->chip_id == PCI_DM9009_ID) { + outl(0x80, ioaddr + DCR12); /* Issue RESET signal */ + mdelay(300); /* Delay 300 ms */ + } + outl(0x0, ioaddr + DCR12); /* Clear RESET signal */ + + /* Process Phyxcer Media Mode */ + if ( !(db->media_mode & 0x10) ) /* Force 1M mode */ + dmfe_set_phyxcer(db); + + /* Media Mode Process */ + if ( !(db->media_mode & DMFE_AUTO) ) + db->op_mode = db->media_mode; /* Force Mode */ + + /* Initialize Transmit/Receive decriptor and CR3/4 */ + dmfe_descriptor_init(db, ioaddr); + + /* Init CR6 to program DM910x operation */ + update_cr6(db->cr6_data, ioaddr); + + /* Send setup frame */ + if (db->chip_id == PCI_DM9132_ID) + dm9132_id_table(dev); /* DM9132 */ + else + send_filter_frame(dev); /* DM9102/DM9102A */ + + /* Init CR7, interrupt active bit */ + db->cr7_data = CR7_DEFAULT; + outl(db->cr7_data, ioaddr + DCR7); + + /* Init CR15, Tx jabber and Rx watchdog timer */ + outl(db->cr15_data, ioaddr + DCR15); + + /* Enable DM910X Tx/Rx function */ + db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000; + update_cr6(db->cr6_data, ioaddr); +} + + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ + +static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb, + struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + struct tx_desc *txptr; + unsigned long flags; + + DMFE_DBUG(0, "dmfe_start_xmit", 0); + + /* Too large packet check */ + if (skb->len > MAX_PACKET_SIZE) { + pr_err("big packet = %d\n", (u16)skb->len); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + /* Resource flag check */ + netif_stop_queue(dev); + + spin_lock_irqsave(&db->lock, flags); + + /* No Tx resource check, it never happen nromally */ + if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) { + spin_unlock_irqrestore(&db->lock, flags); + pr_err("No Tx resource %ld\n", db->tx_queue_cnt); + return NETDEV_TX_BUSY; + } + + /* Disable NIC interrupt */ + outl(0, dev->base_addr + DCR7); + + /* transmit this packet */ + txptr = db->tx_insert_ptr; + skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len); + txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); + + /* Point to next transmit free descriptor */ + db->tx_insert_ptr = txptr->next_tx_desc; + + /* Transmit Packet Process */ + if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } else { + db->tx_queue_cnt++; /* queue TX packet */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + } + + /* Tx resource check */ + if ( db->tx_queue_cnt < TX_FREE_DESC_CNT ) + netif_wake_queue(dev); + + /* Restore CR7 to enable interrupt */ + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, dev->base_addr + DCR7); + + /* free this SKB */ + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ + +static int dmfe_stop(struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + DMFE_DBUG(0, "dmfe_stop", 0); + + /* disable system */ + netif_stop_queue(dev); + + /* deleted timer */ + del_timer_sync(&db->timer); + + /* Reset & stop DM910X board */ + outl(DM910X_RESET, ioaddr + DCR0); + udelay(5); + phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + + /* free interrupt */ + free_irq(dev->irq, dev); + + /* free allocated rx buffer */ + dmfe_free_rxbuffer(db); + +#if 0 + /* show statistic counter */ + printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", + db->tx_fifo_underrun, db->tx_excessive_collision, + db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, + db->tx_jabber_timeout, db->reset_count, db->reset_cr8, + db->reset_fatal, db->reset_TXtimeout); +#endif + + return 0; +} + + +/* + * DM9102 insterrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +static irqreturn_t dmfe_interrupt(int irq, void *dev_id) +{ + struct DEVICE *dev = dev_id; + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + + DMFE_DBUG(0, "dmfe_interrupt()", 0); + + spin_lock_irqsave(&db->lock, flags); + + /* Got DM910X status */ + db->cr5_data = inl(ioaddr + DCR5); + outl(db->cr5_data, ioaddr + DCR5); + if ( !(db->cr5_data & 0xc1) ) { + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Disable all interrupt in CR7 to solve the interrupt edge problem */ + outl(0, ioaddr + DCR7); + + /* Check system status */ + if (db->cr5_data & 0x2000) { + /* system bus error happen */ + DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data); + db->reset_fatal++; + db->wait_reset = 1; /* Need to RESET */ + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Received the coming packet */ + if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) + dmfe_rx_packet(dev, db); + + /* reallocate rx descriptor buffer */ + if (db->rx_avail_cnt<RX_DESC_CNT) + allocate_rx_buffer(db); + + /* Free the transmitted descriptor */ + if ( db->cr5_data & 0x01) + dmfe_free_tx_pkt(dev, db); + + /* Mode Check */ + if (db->dm910x_chk_mode & 0x2) { + db->dm910x_chk_mode = 0x4; + db->cr6_data |= 0x100; + update_cr6(db->cr6_data, db->ioaddr); + } + + /* Restore CR7 to enable interrupt mask */ + outl(db->cr7_data, ioaddr + DCR7); + + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; +} + + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ + +static void poll_dmfe (struct net_device *dev) +{ + /* disable_irq here is not very nice, but with the lockless + interrupt handler we have no other choice. */ + disable_irq(dev->irq); + dmfe_interrupt (dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/* + * Free TX resource after TX complete + */ + +static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) +{ + struct tx_desc *txptr; + unsigned long ioaddr = dev->base_addr; + u32 tdes0; + + txptr = db->tx_remove_ptr; + while(db->tx_packet_cnt) { + tdes0 = le32_to_cpu(txptr->tdes0); + if (tdes0 & 0x80000000) + break; + + /* A packet sent completed */ + db->tx_packet_cnt--; + dev->stats.tx_packets++; + + /* Transmit statistic counter */ + if ( tdes0 != 0x7fffffff ) { + dev->stats.collisions += (tdes0 >> 3) & 0xf; + dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; + if (tdes0 & TDES0_ERR_MASK) { + dev->stats.tx_errors++; + + if (tdes0 & 0x0002) { /* UnderRun */ + db->tx_fifo_underrun++; + if ( !(db->cr6_data & CR6_SFT) ) { + db->cr6_data = db->cr6_data | CR6_SFT; + update_cr6(db->cr6_data, db->ioaddr); + } + } + if (tdes0 & 0x0100) + db->tx_excessive_collision++; + if (tdes0 & 0x0200) + db->tx_late_collision++; + if (tdes0 & 0x0400) + db->tx_no_carrier++; + if (tdes0 & 0x0800) + db->tx_loss_carrier++; + if (tdes0 & 0x4000) + db->tx_jabber_timeout++; + } + } + + txptr = txptr->next_tx_desc; + }/* End of while */ + + /* Update TX remove pointer to next */ + db->tx_remove_ptr = txptr; + + /* Send the Tx packet in queue */ + if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + db->tx_queue_cnt--; + outl(0x1, ioaddr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } + + /* Resource available check */ + if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT ) + netif_wake_queue(dev); /* Active upper layer, send again */ +} + + +/* + * Calculate the CRC valude of the Rx packet + * flag = 1 : return the reverse CRC (for the received packet CRC) + * 0 : return the normal CRC (for Hash Table index) + */ + +static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag) +{ + u32 crc = crc32(~0, Data, Len); + if (flag) crc = ~crc; + return crc; +} + + +/* + * Receive the come packet and pass to upper layer + */ + +static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb, *newskb; + int rxlen; + u32 rdes0; + + rxptr = db->rx_ready_ptr; + + while(db->rx_avail_cnt) { + rdes0 = le32_to_cpu(rxptr->rdes0); + if (rdes0 & 0x80000000) /* packet owner check */ + break; + + db->rx_avail_cnt--; + db->interval_rx_cnt++; + + pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), + RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); + + if ( (rdes0 & 0x300) != 0x300) { + /* A packet without First/Last flag */ + /* reuse this SKB */ + DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + dmfe_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + /* A packet with First/Last flag */ + rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; + + /* error summary bit check */ + if (rdes0 & 0x8000) { + /* This is a error packet */ + dev->stats.rx_errors++; + if (rdes0 & 1) + dev->stats.rx_fifo_errors++; + if (rdes0 & 2) + dev->stats.rx_crc_errors++; + if (rdes0 & 0x80) + dev->stats.rx_length_errors++; + } + + if ( !(rdes0 & 0x8000) || + ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { + skb = rxptr->rx_skb_ptr; + + /* Received Packet CRC check need or not */ + if ( (db->dm910x_chk_mode & 1) && + (cal_CRC(skb->data, rxlen, 1) != + (*(u32 *) (skb->data+rxlen) ))) { /* FIXME (?) */ + /* Found a error received packet */ + dmfe_reuse_skb(db, rxptr->rx_skb_ptr); + db->dm910x_chk_mode = 3; + } else { + /* Good packet, send to upper layer */ + /* Shorst packet used new SKB */ + if ((rxlen < RX_COPY_SIZE) && + ((newskb = dev_alloc_skb(rxlen + 2)) + != NULL)) { + + skb = newskb; + /* size less than COPY_SIZE, allocate a rxlen SKB */ + skb_reserve(skb, 2); /* 16byte align */ + skb_copy_from_linear_data(rxptr->rx_skb_ptr, + skb_put(skb, rxlen), + rxlen); + dmfe_reuse_skb(db, rxptr->rx_skb_ptr); + } else + skb_put(skb, rxlen); + + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += rxlen; + } + } else { + /* Reuse SKB buffer when the packet is error */ + DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + dmfe_reuse_skb(db, rxptr->rx_skb_ptr); + } + } + + rxptr = rxptr->next_rx_desc; + } + + db->rx_ready_ptr = rxptr; +} + +/* + * Set DM910X multicast address + */ + +static void dmfe_set_filter_mode(struct DEVICE * dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long flags; + int mc_count = netdev_mc_count(dev); + + DMFE_DBUG(0, "dmfe_set_filter_mode()", 0); + spin_lock_irqsave(&db->lock, flags); + + if (dev->flags & IFF_PROMISC) { + DMFE_DBUG(0, "Enable PROM Mode", 0); + db->cr6_data |= CR6_PM | CR6_PBF; + update_cr6(db->cr6_data, db->ioaddr); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + if (dev->flags & IFF_ALLMULTI || mc_count > DMFE_MAX_MULTICAST) { + DMFE_DBUG(0, "Pass all multicast address", mc_count); + db->cr6_data &= ~(CR6_PM | CR6_PBF); + db->cr6_data |= CR6_PAM; + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + DMFE_DBUG(0, "Set multicast address", mc_count); + if (db->chip_id == PCI_DM9132_ID) + dm9132_id_table(dev); /* DM9132 */ + else + send_filter_frame(dev); /* DM9102/DM9102A */ + spin_unlock_irqrestore(&db->lock, flags); +} + +/* + * Ethtool interace + */ + +static void dmfe_ethtool_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct dmfe_board_info *np = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + if (np->pdev) + strcpy(info->bus_info, pci_name(np->pdev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); +} + +static int dmfe_ethtool_set_wol(struct net_device *dev, + struct ethtool_wolinfo *wolinfo) +{ + struct dmfe_board_info *db = netdev_priv(dev); + + if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + db->wol_mode = wolinfo->wolopts; + return 0; +} + +static void dmfe_ethtool_get_wol(struct net_device *dev, + struct ethtool_wolinfo *wolinfo) +{ + struct dmfe_board_info *db = netdev_priv(dev); + + wolinfo->supported = WAKE_PHY | WAKE_MAGIC; + wolinfo->wolopts = db->wol_mode; +} + + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = dmfe_ethtool_get_drvinfo, + .get_link = ethtool_op_get_link, + .set_wol = dmfe_ethtool_set_wol, + .get_wol = dmfe_ethtool_get_wol, +}; + +/* + * A periodic timer routine + * Dynamic media sense, allocate Rx buffer... + */ + +static void dmfe_timer(unsigned long data) +{ + u32 tmp_cr8; + unsigned char tmp_cr12; + struct DEVICE *dev = (struct DEVICE *) data; + struct dmfe_board_info *db = netdev_priv(dev); + unsigned long flags; + + int link_ok, link_ok_phy; + + DMFE_DBUG(0, "dmfe_timer()", 0); + spin_lock_irqsave(&db->lock, flags); + + /* Media mode process when Link OK before enter this route */ + if (db->first_in_callback == 0) { + db->first_in_callback = 1; + if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) { + db->cr6_data &= ~0x40000; + update_cr6(db->cr6_data, db->ioaddr); + phy_write(db->ioaddr, + db->phy_addr, 0, 0x1000, db->chip_id); + db->cr6_data |= 0x40000; + update_cr6(db->cr6_data, db->ioaddr); + db->timer.expires = DMFE_TIMER_WUT + HZ * 2; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + } + + + /* Operating Mode Check */ + if ( (db->dm910x_chk_mode & 0x1) && + (dev->stats.rx_packets > MAX_CHECK_PACKET) ) + db->dm910x_chk_mode = 0x4; + + /* Dynamic reset DM910X : system error or transmit time-out */ + tmp_cr8 = inl(db->ioaddr + DCR8); + if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { + db->reset_cr8++; + db->wait_reset = 1; + } + db->interval_rx_cnt = 0; + + /* TX polling kick monitor */ + if ( db->tx_packet_cnt && + time_after(jiffies, dev_trans_start(dev) + DMFE_TX_KICK) ) { + outl(0x1, dev->base_addr + DCR1); /* Tx polling again */ + + /* TX Timeout */ + if (time_after(jiffies, dev_trans_start(dev) + DMFE_TX_TIMEOUT) ) { + db->reset_TXtimeout++; + db->wait_reset = 1; + dev_warn(&dev->dev, "Tx timeout - resetting\n"); + } + } + + if (db->wait_reset) { + DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); + db->reset_count++; + dmfe_dynamic_reset(dev); + db->first_in_callback = 0; + db->timer.expires = DMFE_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + /* Link status check, Dynamic media type change */ + if (db->chip_id == PCI_DM9132_ID) + tmp_cr12 = inb(db->ioaddr + DCR9 + 3); /* DM9132 */ + else + tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */ + + if ( ((db->chip_id == PCI_DM9102_ID) && + (db->chip_revision == 0x30)) || + ((db->chip_id == PCI_DM9132_ID) && + (db->chip_revision == 0x10)) ) { + /* DM9102A Chip */ + if (tmp_cr12 & 2) + link_ok = 0; + else + link_ok = 1; + } + else + /*0x43 is used instead of 0x3 because bit 6 should represent + link status of external PHY */ + link_ok = (tmp_cr12 & 0x43) ? 1 : 0; + + + /* If chip reports that link is failed it could be because external + PHY link status pin is not connected correctly to chip + To be sure ask PHY too. + */ + + /* need a dummy read because of PHY's register latch*/ + phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id); + link_ok_phy = (phy_read (db->ioaddr, + db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0; + + if (link_ok_phy != link_ok) { + DMFE_DBUG (0, "PHY and chip report different link status", 0); + link_ok = link_ok | link_ok_phy; + } + + if ( !link_ok && netif_carrier_ok(dev)) { + /* Link Failed */ + DMFE_DBUG(0, "Link Failed", tmp_cr12); + netif_carrier_off(dev); + + /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ + /* AUTO or force 1M Homerun/Longrun don't need */ + if ( !(db->media_mode & 0x38) ) + phy_write(db->ioaddr, db->phy_addr, + 0, 0x1000, db->chip_id); + + /* AUTO mode, if INT phyxcer link failed, select EXT device */ + if (db->media_mode & DMFE_AUTO) { + /* 10/100M link failed, used 1M Home-Net */ + db->cr6_data|=0x00040000; /* bit18=1, MII */ + db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ + update_cr6(db->cr6_data, db->ioaddr); + } + } else if (!netif_carrier_ok(dev)) { + + DMFE_DBUG(0, "Link link OK", tmp_cr12); + + /* Auto Sense Speed */ + if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) { + netif_carrier_on(dev); + SHOW_MEDIA_TYPE(db->op_mode); + } + + dmfe_process_mode(db); + } + + /* HPNA remote command check */ + if (db->HPNA_command & 0xf00) { + db->HPNA_timer--; + if (!db->HPNA_timer) + dmfe_HPNA_remote_cmd_chk(db); + } + + /* Timer active again */ + db->timer.expires = DMFE_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); +} + + +/* + * Dynamic reset the DM910X board + * Stop DM910X board + * Free Tx/Rx allocated memory + * Reset DM910X board + * Re-initialize DM910X board + */ + +static void dmfe_dynamic_reset(struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + + DMFE_DBUG(0, "dmfe_dynamic_reset()", 0); + + /* Sopt MAC controller */ + db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ + update_cr6(db->cr6_data, dev->base_addr); + outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ + outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); + + /* Disable upper layer interface */ + netif_stop_queue(dev); + + /* Free Rx Allocate buffer */ + dmfe_free_rxbuffer(db); + + /* system variable init */ + db->tx_packet_cnt = 0; + db->tx_queue_cnt = 0; + db->rx_avail_cnt = 0; + netif_carrier_off(dev); + db->wait_reset = 0; + + /* Re-initialize DM910X board */ + dmfe_init_dm910x(dev); + + /* Restart upper layer interface */ + netif_wake_queue(dev); +} + + +/* + * free all allocated rx buffer + */ + +static void dmfe_free_rxbuffer(struct dmfe_board_info * db) +{ + DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0); + + /* free allocated rx buffer */ + while (db->rx_avail_cnt) { + dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); + db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; + db->rx_avail_cnt--; + } +} + + +/* + * Reuse the SK buffer + */ + +static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb) +{ + struct rx_desc *rxptr = db->rx_insert_ptr; + + if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { + rxptr->rx_skb_ptr = skb; + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, + skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + db->rx_avail_cnt++; + db->rx_insert_ptr = rxptr->next_rx_desc; + } else + DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); +} + + +/* + * Initialize transmit/Receive descriptor + * Using Chain structure, and allocate Tx/Rx buffer + */ + +static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioaddr) +{ + struct tx_desc *tmp_tx; + struct rx_desc *tmp_rx; + unsigned char *tmp_buf; + dma_addr_t tmp_tx_dma, tmp_rx_dma; + dma_addr_t tmp_buf_dma; + int i; + + DMFE_DBUG(0, "dmfe_descriptor_init()", 0); + + /* tx descriptor start pointer */ + db->tx_insert_ptr = db->first_tx_desc; + db->tx_remove_ptr = db->first_tx_desc; + outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ + + /* rx descriptor start pointer */ + db->first_rx_desc = (void *)db->first_tx_desc + + sizeof(struct tx_desc) * TX_DESC_CNT; + + db->first_rx_desc_dma = db->first_tx_desc_dma + + sizeof(struct tx_desc) * TX_DESC_CNT; + db->rx_insert_ptr = db->first_rx_desc; + db->rx_ready_ptr = db->first_rx_desc; + outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ + + /* Init Transmit chain */ + tmp_buf = db->buf_pool_start; + tmp_buf_dma = db->buf_pool_dma_start; + tmp_tx_dma = db->first_tx_desc_dma; + for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { + tmp_tx->tx_buf_ptr = tmp_buf; + tmp_tx->tdes0 = cpu_to_le32(0); + tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ + tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); + tmp_tx_dma += sizeof(struct tx_desc); + tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); + tmp_tx->next_tx_desc = tmp_tx + 1; + tmp_buf = tmp_buf + TX_BUF_ALLOC; + tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; + } + (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); + tmp_tx->next_tx_desc = db->first_tx_desc; + + /* Init Receive descriptor chain */ + tmp_rx_dma=db->first_rx_desc_dma; + for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { + tmp_rx->rdes0 = cpu_to_le32(0); + tmp_rx->rdes1 = cpu_to_le32(0x01000600); + tmp_rx_dma += sizeof(struct rx_desc); + tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); + tmp_rx->next_rx_desc = tmp_rx + 1; + } + (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); + tmp_rx->next_rx_desc = db->first_rx_desc; + + /* pre-allocate Rx buffer */ + allocate_rx_buffer(db); +} + + +/* + * Update CR6 value + * Firstly stop DM910X , then written value and start + */ + +static void update_cr6(u32 cr6_data, unsigned long ioaddr) +{ + u32 cr6_tmp; + + cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */ + outl(cr6_tmp, ioaddr + DCR6); + udelay(5); + outl(cr6_data, ioaddr + DCR6); + udelay(5); +} + + +/* + * Send a setup frame for DM9132 + * This setup frame initialize DM910X address filter mode +*/ + +static void dm9132_id_table(struct DEVICE *dev) +{ + struct netdev_hw_addr *ha; + u16 * addrptr; + unsigned long ioaddr = dev->base_addr+0xc0; /* ID Table */ + u32 hash_val; + u16 i, hash_table[4]; + + DMFE_DBUG(0, "dm9132_id_table()", 0); + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + outw(addrptr[0], ioaddr); + ioaddr += 4; + outw(addrptr[1], ioaddr); + ioaddr += 4; + outw(addrptr[2], ioaddr); + ioaddr += 4; + + /* Clear Hash Table */ + memset(hash_table, 0, sizeof(hash_table)); + + /* broadcast address */ + hash_table[3] = 0x8000; + + /* the multicast address in Hash Table : 64 bits */ + netdev_for_each_mc_addr(ha, dev) { + hash_val = cal_CRC((char *) ha->addr, 6, 0) & 0x3f; + hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); + } + + /* Write the hash table to MAC MD table */ + for (i = 0; i < 4; i++, ioaddr += 4) + outw(hash_table[i], ioaddr); +} + + +/* + * Send a setup frame for DM9102/DM9102A + * This setup frame initialize DM910X address filter mode + */ + +static void send_filter_frame(struct DEVICE *dev) +{ + struct dmfe_board_info *db = netdev_priv(dev); + struct netdev_hw_addr *ha; + struct tx_desc *txptr; + u16 * addrptr; + u32 * suptr; + int i; + + DMFE_DBUG(0, "send_filter_frame()", 0); + + txptr = db->tx_insert_ptr; + suptr = (u32 *) txptr->tx_buf_ptr; + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + + /* broadcast address */ + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + + /* fit the multicast address */ + netdev_for_each_mc_addr(ha, dev) { + addrptr = (u16 *) ha->addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + } + + for (i = netdev_mc_count(dev); i < 14; i++) { + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + } + + /* prepare the setup frame */ + db->tx_insert_ptr = txptr->next_tx_desc; + txptr->tdes1 = cpu_to_le32(0x890000c0); + + /* Resource Check and Send the setup packet */ + if (!db->tx_packet_cnt) { + /* Resource Empty */ + db->tx_packet_cnt++; + txptr->tdes0 = cpu_to_le32(0x80000000); + update_cr6(db->cr6_data | 0x2000, dev->base_addr); + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + update_cr6(db->cr6_data, dev->base_addr); + dev->trans_start = jiffies; + } else + db->tx_queue_cnt++; /* Put in TX queue */ +} + + +/* + * Allocate rx buffer, + * As possible as allocate maxiumn Rx buffer + */ + +static void allocate_rx_buffer(struct dmfe_board_info *db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + + rxptr = db->rx_insert_ptr; + + while(db->rx_avail_cnt < RX_DESC_CNT) { + if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) + break; + rxptr->rx_skb_ptr = skb; /* FIXME (?) */ + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, + RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + rxptr = rxptr->next_rx_desc; + db->rx_avail_cnt++; + } + + db->rx_insert_ptr = rxptr; +} + + +/* + * Read one word data from the serial ROM + */ + +static u16 read_srom_word(long ioaddr, int offset) +{ + int i; + u16 srom_data = 0; + long cr9_ioaddr = ioaddr + DCR9; + + outl(CR9_SROM_READ, cr9_ioaddr); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + /* Send the Read Command 110b */ + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); + + /* Send the offset */ + for (i = 5; i >= 0; i--) { + srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; + SROM_CLK_WRITE(srom_data, cr9_ioaddr); + } + + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + for (i = 16; i > 0; i--) { + outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); + udelay(5); + srom_data = (srom_data << 1) | + ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + udelay(5); + } + + outl(CR9_SROM_READ, cr9_ioaddr); + return srom_data; +} + + +/* + * Auto sense the media mode + */ + +static u8 dmfe_sense_speed(struct dmfe_board_info * db) +{ + u8 ErrFlag = 0; + u16 phy_mode; + + /* CR6 bit18=0, select 10/100M */ + update_cr6( (db->cr6_data & ~0x40000), db->ioaddr); + + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + + if ( (phy_mode & 0x24) == 0x24 ) { + if (db->chip_id == PCI_DM9132_ID) /* DM9132 */ + phy_mode = phy_read(db->ioaddr, + db->phy_addr, 7, db->chip_id) & 0xf000; + else /* DM9102/DM9102A */ + phy_mode = phy_read(db->ioaddr, + db->phy_addr, 17, db->chip_id) & 0xf000; + switch (phy_mode) { + case 0x1000: db->op_mode = DMFE_10MHF; break; + case 0x2000: db->op_mode = DMFE_10MFD; break; + case 0x4000: db->op_mode = DMFE_100MHF; break; + case 0x8000: db->op_mode = DMFE_100MFD; break; + default: db->op_mode = DMFE_10MHF; + ErrFlag = 1; + break; + } + } else { + db->op_mode = DMFE_10MHF; + DMFE_DBUG(0, "Link Failed :", phy_mode); + ErrFlag = 1; + } + + return ErrFlag; +} + + +/* + * Set 10/100 phyxcer capability + * AUTO mode : phyxcer register4 is NIC capability + * Force mode: phyxcer register4 is the force media + */ + +static void dmfe_set_phyxcer(struct dmfe_board_info *db) +{ + u16 phy_reg; + + /* Select 10/100M phyxcer */ + db->cr6_data &= ~0x40000; + update_cr6(db->cr6_data, db->ioaddr); + + /* DM9009 Chip: Phyxcer reg18 bit12=0 */ + if (db->chip_id == PCI_DM9009_ID) { + phy_reg = phy_read(db->ioaddr, + db->phy_addr, 18, db->chip_id) & ~0x1000; + + phy_write(db->ioaddr, + db->phy_addr, 18, phy_reg, db->chip_id); + } + + /* Phyxcer capability setting */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + + if (db->media_mode & DMFE_AUTO) { + /* AUTO Mode */ + phy_reg |= db->PHY_reg4; + } else { + /* Force Mode */ + switch(db->media_mode) { + case DMFE_10MHF: phy_reg |= 0x20; break; + case DMFE_10MFD: phy_reg |= 0x40; break; + case DMFE_100MHF: phy_reg |= 0x80; break; + case DMFE_100MFD: phy_reg |= 0x100; break; + } + if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61; + } + + /* Write new capability to Phyxcer Reg4 */ + if ( !(phy_reg & 0x01e0)) { + phy_reg|=db->PHY_reg4; + db->media_mode|=DMFE_AUTO; + } + phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + + /* Restart Auto-Negotiation */ + if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id); + if ( !db->chip_type ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); +} + + +/* + * Process op-mode + * AUTO mode : PHY controller in Auto-negotiation Mode + * Force mode: PHY controller in force mode with HUB + * N-way force capability with SWITCH + */ + +static void dmfe_process_mode(struct dmfe_board_info *db) +{ + u16 phy_reg; + + /* Full Duplex Mode Check */ + if (db->op_mode & 0x4) + db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ + else + db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ + + /* Transciver Selection */ + if (db->op_mode & 0x10) /* 1M HomePNA */ + db->cr6_data |= 0x40000;/* External MII select */ + else + db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */ + + update_cr6(db->cr6_data, db->ioaddr); + + /* 10/100M phyxcer force mode need */ + if ( !(db->media_mode & 0x18)) { + /* Forece Mode */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); + if ( !(phy_reg & 0x1) ) { + /* parter without N-Way capability */ + phy_reg = 0x0; + switch(db->op_mode) { + case DMFE_10MHF: phy_reg = 0x0; break; + case DMFE_10MFD: phy_reg = 0x100; break; + case DMFE_100MHF: phy_reg = 0x2000; break; + case DMFE_100MFD: phy_reg = 0x2100; break; + } + phy_write(db->ioaddr, + db->phy_addr, 0, phy_reg, db->chip_id); + if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) + mdelay(20); + phy_write(db->ioaddr, + db->phy_addr, 0, phy_reg, db->chip_id); + } + } +} + + +/* + * Write a word to Phy register + */ + +static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, + u16 phy_data, u32 chip_id) +{ + u16 i; + unsigned long ioaddr; + + if (chip_id == PCI_DM9132_ID) { + ioaddr = iobase + 0x80 + offset * 4; + outw(phy_data, ioaddr); + } else { + /* DM9102/DM9102A Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0); + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send write command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0); + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, + phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, + offset & i ? PHY_DATA_1 : PHY_DATA_0); + + /* written trasnition */ + phy_write_1bit(ioaddr, PHY_DATA_1); + phy_write_1bit(ioaddr, PHY_DATA_0); + + /* Write a word data to PHY controller */ + for ( i = 0x8000; i > 0; i >>= 1) + phy_write_1bit(ioaddr, + phy_data & i ? PHY_DATA_1 : PHY_DATA_0); + } +} + + +/* + * Read a word data from phy register + */ + +static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +{ + int i; + u16 phy_data; + unsigned long ioaddr; + + if (chip_id == PCI_DM9132_ID) { + /* DM9132 Chip */ + ioaddr = iobase + 0x80 + offset * 4; + phy_data = inw(ioaddr); + } else { + /* DM9102/DM9102A Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0); + phy_write_1bit(ioaddr, PHY_DATA_1); + + /* Send read command(10) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_1); + phy_write_1bit(ioaddr, PHY_DATA_0); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, + phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, + offset & i ? PHY_DATA_1 : PHY_DATA_0); + + /* Skip transition state */ + phy_read_1bit(ioaddr); + + /* read 16bit data */ + for (phy_data = 0, i = 0; i < 16; i++) { + phy_data <<= 1; + phy_data |= phy_read_1bit(ioaddr); + } + } + + return phy_data; +} + + +/* + * Write one bit data to Phy Controller + */ + +static void phy_write_1bit(unsigned long ioaddr, u32 phy_data) +{ + outl(phy_data, ioaddr); /* MII Clock Low */ + udelay(1); + outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ + udelay(1); + outl(phy_data, ioaddr); /* MII Clock Low */ + udelay(1); +} + + +/* + * Read one bit phy data from PHY controller + */ + +static u16 phy_read_1bit(unsigned long ioaddr) +{ + u16 phy_data; + + outl(0x50000, ioaddr); + udelay(1); + phy_data = ( inl(ioaddr) >> 19 ) & 0x1; + outl(0x40000, ioaddr); + udelay(1); + + return phy_data; +} + + +/* + * Parser SROM and media mode + */ + +static void dmfe_parse_srom(struct dmfe_board_info * db) +{ + char * srom = db->srom; + int dmfe_mode, tmp_reg; + + DMFE_DBUG(0, "dmfe_parse_srom() ", 0); + + /* Init CR15 */ + db->cr15_data = CR15_DEFAULT; + + /* Check SROM Version */ + if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) { + /* SROM V4.01 */ + /* Get NIC support media mode */ + db->NIC_capability = le16_to_cpup((__le16 *) (srom + 34)); + db->PHY_reg4 = 0; + for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) { + switch( db->NIC_capability & tmp_reg ) { + case 0x1: db->PHY_reg4 |= 0x0020; break; + case 0x2: db->PHY_reg4 |= 0x0040; break; + case 0x4: db->PHY_reg4 |= 0x0080; break; + case 0x8: db->PHY_reg4 |= 0x0100; break; + } + } + + /* Media Mode Force or not check */ + dmfe_mode = (le32_to_cpup((__le32 *) (srom + 34)) & + le32_to_cpup((__le32 *) (srom + 36))); + switch(dmfe_mode) { + case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */ + case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */ + case 0x8: dmfe_media_mode = DMFE_100MFD; break; /* 100MFD */ + case 0x100: + case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */ + } + + /* Special Function setting */ + /* VLAN function */ + if ( (SF_mode & 0x1) || (srom[43] & 0x80) ) + db->cr15_data |= 0x40; + + /* Flow Control */ + if ( (SF_mode & 0x2) || (srom[40] & 0x1) ) + db->cr15_data |= 0x400; + + /* TX pause packet */ + if ( (SF_mode & 0x4) || (srom[40] & 0xe) ) + db->cr15_data |= 0x9800; + } + + /* Parse HPNA parameter */ + db->HPNA_command = 1; + + /* Accept remote command or not */ + if (HPNA_rx_cmd == 0) + db->HPNA_command |= 0x8000; + + /* Issue remote command & operation mode */ + if (HPNA_tx_cmd == 1) + switch(HPNA_mode) { /* Issue Remote Command */ + case 0: db->HPNA_command |= 0x0904; break; + case 1: db->HPNA_command |= 0x0a00; break; + case 2: db->HPNA_command |= 0x0506; break; + case 3: db->HPNA_command |= 0x0602; break; + } + else + switch(HPNA_mode) { /* Don't Issue */ + case 0: db->HPNA_command |= 0x0004; break; + case 1: db->HPNA_command |= 0x0000; break; + case 2: db->HPNA_command |= 0x0006; break; + case 3: db->HPNA_command |= 0x0002; break; + } + + /* Check DM9801 or DM9802 present or not */ + db->HPNA_present = 0; + update_cr6(db->cr6_data|0x40000, db->ioaddr); + tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id); + if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) { + /* DM9801 or DM9802 present */ + db->HPNA_timer = 8; + if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) { + /* DM9801 HomeRun */ + db->HPNA_present = 1; + dmfe_program_DM9801(db, tmp_reg); + } else { + /* DM9802 LongRun */ + db->HPNA_present = 2; + dmfe_program_DM9802(db); + } + } + +} + + +/* + * Init HomeRun DM9801 + */ + +static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev) +{ + uint reg17, reg25; + + if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR; + switch(HPNA_rev) { + case 0xb900: /* DM9801 E3 */ + db->HPNA_command |= 0x1000; + reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id); + reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000; + reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + break; + case 0xb901: /* DM9801 E4 */ + reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor; + reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3; + break; + case 0xb902: /* DM9801 E5 */ + case 0xb903: /* DM9801 E6 */ + default: + db->HPNA_command |= 0x1000; + reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5; + reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); + reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor; + break; + } + phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); + phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id); + phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id); +} + + +/* + * Init HomeRun DM9802 + */ + +static void dmfe_program_DM9802(struct dmfe_board_info * db) +{ + uint phy_reg; + + if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR; + phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); + phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); + phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor; + phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id); +} + + +/* + * Check remote HPNA power and speed status. If not correct, + * issue command again. +*/ + +static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db) +{ + uint phy_reg; + + /* Got remote device status */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60; + switch(phy_reg) { + case 0x00: phy_reg = 0x0a00;break; /* LP/LS */ + case 0x20: phy_reg = 0x0900;break; /* LP/HS */ + case 0x40: phy_reg = 0x0600;break; /* HP/LS */ + case 0x60: phy_reg = 0x0500;break; /* HP/HS */ + } + + /* Check remote device status match our setting ot not */ + if ( phy_reg != (db->HPNA_command & 0x0f00) ) { + phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, + db->chip_id); + db->HPNA_timer=8; + } else + db->HPNA_timer=600; /* Match, every 10 minutes, check */ +} + + + +static DEFINE_PCI_DEVICE_TABLE(dmfe_pci_tbl) = { + { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID }, + { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID }, + { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID }, + { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl); + + +#ifdef CONFIG_PM +static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pci_dev); + struct dmfe_board_info *db = netdev_priv(dev); + u32 tmp; + + /* Disable upper layer interface */ + netif_device_detach(dev); + + /* Disable Tx/Rx */ + db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); + update_cr6(db->cr6_data, dev->base_addr); + + /* Disable Interrupt */ + outl(0, dev->base_addr + DCR7); + outl(inl (dev->base_addr + DCR5), dev->base_addr + DCR5); + + /* Fre RX buffers */ + dmfe_free_rxbuffer(db); + + /* Enable WOL */ + pci_read_config_dword(pci_dev, 0x40, &tmp); + tmp &= ~(DMFE_WOL_LINKCHANGE|DMFE_WOL_MAGICPACKET); + + if (db->wol_mode & WAKE_PHY) + tmp |= DMFE_WOL_LINKCHANGE; + if (db->wol_mode & WAKE_MAGIC) + tmp |= DMFE_WOL_MAGICPACKET; + + pci_write_config_dword(pci_dev, 0x40, tmp); + + pci_enable_wake(pci_dev, PCI_D3hot, 1); + pci_enable_wake(pci_dev, PCI_D3cold, 1); + + /* Power down device*/ + pci_save_state(pci_dev); + pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state)); + + return 0; +} + +static int dmfe_resume(struct pci_dev *pci_dev) +{ + struct net_device *dev = pci_get_drvdata(pci_dev); + u32 tmp; + + pci_set_power_state(pci_dev, PCI_D0); + pci_restore_state(pci_dev); + + /* Re-initialize DM910X board */ + dmfe_init_dm910x(dev); + + /* Disable WOL */ + pci_read_config_dword(pci_dev, 0x40, &tmp); + + tmp &= ~(DMFE_WOL_LINKCHANGE | DMFE_WOL_MAGICPACKET); + pci_write_config_dword(pci_dev, 0x40, tmp); + + pci_enable_wake(pci_dev, PCI_D3hot, 0); + pci_enable_wake(pci_dev, PCI_D3cold, 0); + + /* Restart upper layer interface */ + netif_device_attach(dev); + + return 0; +} +#else +#define dmfe_suspend NULL +#define dmfe_resume NULL +#endif + +static struct pci_driver dmfe_driver = { + .name = "dmfe", + .id_table = dmfe_pci_tbl, + .probe = dmfe_init_one, + .remove = __devexit_p(dmfe_remove_one), + .suspend = dmfe_suspend, + .resume = dmfe_resume +}; + +MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw"); +MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_param(debug, int, 0); +module_param(mode, byte, 0); +module_param(cr6set, int, 0); +module_param(chkmode, byte, 0); +module_param(HPNA_mode, byte, 0); +module_param(HPNA_rx_cmd, byte, 0); +module_param(HPNA_tx_cmd, byte, 0); +module_param(HPNA_NoiseFloor, byte, 0); +module_param(SF_mode, byte, 0); +MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)"); +MODULE_PARM_DESC(mode, "Davicom DM9xxx: " + "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); + +MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function " + "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)"); + +/* Description: + * when user used insmod to add module, system invoked init_module() + * to initialize and register. + */ + +static int __init dmfe_init_module(void) +{ + int rc; + + pr_info("%s\n", version); + printed_version = 1; + + DMFE_DBUG(0, "init_module() ", debug); + + if (debug) + dmfe_debug = debug; /* set debug flag */ + if (cr6set) + dmfe_cr6_user_set = cr6set; + + switch(mode) { + case DMFE_10MHF: + case DMFE_100MHF: + case DMFE_10MFD: + case DMFE_100MFD: + case DMFE_1M_HPNA: + dmfe_media_mode = mode; + break; + default:dmfe_media_mode = DMFE_AUTO; + break; + } + + if (HPNA_mode > 4) + HPNA_mode = 0; /* Default: LP/HS */ + if (HPNA_rx_cmd > 1) + HPNA_rx_cmd = 0; /* Default: Ignored remote cmd */ + if (HPNA_tx_cmd > 1) + HPNA_tx_cmd = 0; /* Default: Don't issue remote cmd */ + if (HPNA_NoiseFloor > 15) + HPNA_NoiseFloor = 0; + + rc = pci_register_driver(&dmfe_driver); + if (rc < 0) + return rc; + + return 0; +} + + +/* + * Description: + * when user used rmmod to delete module, system invoked clean_module() + * to un-register all registered services. + */ + +static void __exit dmfe_cleanup_module(void) +{ + DMFE_DBUG(0, "dmfe_clean_module() ", debug); + pci_unregister_driver(&dmfe_driver); +} + +module_init(dmfe_init_module); +module_exit(dmfe_cleanup_module); diff --git a/drivers/net/ethernet/dec/tulip/eeprom.c b/drivers/net/ethernet/dec/tulip/eeprom.c new file mode 100644 index 00000000000..fa5eee925f2 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/eeprom.c @@ -0,0 +1,385 @@ +/* + drivers/net/tulip/eeprom.c + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + Please submit bug reports to http://bugzilla.kernel.org/. +*/ + +#include <linux/pci.h> +#include <linux/slab.h> +#include "tulip.h" +#include <linux/init.h> +#include <asm/unaligned.h> + + + +/* Serial EEPROM section. */ +/* The main routine to parse the very complicated SROM structure. + Search www.digital.com for "21X4 SROM" to get details. + This code is very complex, and will require changes to support + additional cards, so I'll be verbose about what is going on. + */ + +/* Known cards that have old-style EEPROMs. */ +static struct eeprom_fixup eeprom_fixups[] __devinitdata = { + {"Asante", 0, 0, 0x94, {0x1e00, 0x0000, 0x0800, 0x0100, 0x018c, + 0x0000, 0x0000, 0xe078, 0x0001, 0x0050, 0x0018 }}, + {"SMC9332DST", 0, 0, 0xC0, { 0x1e00, 0x0000, 0x0800, 0x041f, + 0x0000, 0x009E, /* 10baseT */ + 0x0004, 0x009E, /* 10baseT-FD */ + 0x0903, 0x006D, /* 100baseTx */ + 0x0905, 0x006D, /* 100baseTx-FD */ }}, + {"Cogent EM100", 0, 0, 0x92, { 0x1e00, 0x0000, 0x0800, 0x063f, + 0x0107, 0x8021, /* 100baseFx */ + 0x0108, 0x8021, /* 100baseFx-FD */ + 0x0100, 0x009E, /* 10baseT */ + 0x0104, 0x009E, /* 10baseT-FD */ + 0x0103, 0x006D, /* 100baseTx */ + 0x0105, 0x006D, /* 100baseTx-FD */ }}, + {"Maxtech NX-110", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x0513, + 0x1001, 0x009E, /* 10base2, CSR12 0x10*/ + 0x0000, 0x009E, /* 10baseT */ + 0x0004, 0x009E, /* 10baseT-FD */ + 0x0303, 0x006D, /* 100baseTx, CSR12 0x03 */ + 0x0305, 0x006D, /* 100baseTx-FD CSR12 0x03 */}}, + {"Accton EN1207", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x051F, + 0x1B01, 0x0000, /* 10base2, CSR12 0x1B */ + 0x0B00, 0x009E, /* 10baseT, CSR12 0x0B */ + 0x0B04, 0x009E, /* 10baseT-FD,CSR12 0x0B */ + 0x1B03, 0x006D, /* 100baseTx, CSR12 0x1B */ + 0x1B05, 0x006D, /* 100baseTx-FD CSR12 0x1B */ + }}, + {"NetWinder", 0x00, 0x10, 0x57, + /* Default media = MII + * MII block, reset sequence (3) = 0x0821 0x0000 0x0001, capabilities 0x01e1 + */ + { 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 } + }, + {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset */ + 0x0000, /* 0 == high offset, 0 == gap */ + 0x0800, /* Default Autoselect */ + 0x8001, /* 1 leaf, extended type, bogus len */ + 0x0003, /* Type 3 (MII), PHY #0 */ + 0x0400, /* 0 init instr, 4 reset instr */ + 0x0801, /* Set control mode, GP0 output */ + 0x0000, /* Drive GP0 Low (RST is active low) */ + 0x0800, /* control mode, GP0 input (undriven) */ + 0x0000, /* clear control mode */ + 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX */ + 0x01e0, /* Advertise all above */ + 0x5000, /* FDX all above */ + 0x1800, /* Set fast TTM in 100bt modes */ + 0x0000, /* PHY cannot be unplugged */ + }}, + {NULL}}; + + +static const char *block_name[] __devinitdata = { + "21140 non-MII", + "21140 MII PHY", + "21142 Serial PHY", + "21142 MII PHY", + "21143 SYM PHY", + "21143 reset method" +}; + + +/** + * tulip_build_fake_mediatable - Build a fake mediatable entry. + * @tp: Ptr to the tulip private data. + * + * Some cards like the 3x5 HSC cards (J3514A) do not have a standard + * srom and can not be handled under the fixup routine. These cards + * still need a valid mediatable entry for correct csr12 setup and + * mii handling. + * + * Since this is currently a parisc-linux specific function, the + * #ifdef __hppa__ should completely optimize this function away for + * non-parisc hardware. + */ +static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp) +{ +#ifdef CONFIG_GSC + if (tp->flags & NEEDS_FAKE_MEDIA_TABLE) { + static unsigned char leafdata[] = + { 0x01, /* phy number */ + 0x02, /* gpr setup sequence length */ + 0x02, 0x00, /* gpr setup sequence */ + 0x02, /* phy reset sequence length */ + 0x01, 0x00, /* phy reset sequence */ + 0x00, 0x78, /* media capabilities */ + 0x00, 0xe0, /* nway advertisement */ + 0x00, 0x05, /* fdx bit map */ + 0x00, 0x06 /* ttm bit map */ + }; + + tp->mtable = kmalloc(sizeof(struct mediatable) + + sizeof(struct medialeaf), GFP_KERNEL); + + if (tp->mtable == NULL) + return; /* Horrible, impossible failure. */ + + tp->mtable->defaultmedia = 0x800; + tp->mtable->leafcount = 1; + tp->mtable->csr12dir = 0x3f; /* inputs on bit7 for hsc-pci, bit6 for pci-fx */ + tp->mtable->has_nonmii = 0; + tp->mtable->has_reset = 0; + tp->mtable->has_mii = 1; + tp->mtable->csr15dir = tp->mtable->csr15val = 0; + tp->mtable->mleaf[0].type = 1; + tp->mtable->mleaf[0].media = 11; + tp->mtable->mleaf[0].leafdata = &leafdata[0]; + tp->flags |= HAS_PHY_IRQ; + tp->csr12_shadow = -1; + } +#endif +} + +void __devinit tulip_parse_eeprom(struct net_device *dev) +{ + /* + dev is not registered at this point, so logging messages can't + use dev_<level> or netdev_<level> but dev->name is good via a + hack in the caller + */ + + /* The last media info list parsed, for multiport boards. */ + static struct mediatable *last_mediatable; + static unsigned char *last_ee_data; + static int controller_index; + struct tulip_private *tp = netdev_priv(dev); + unsigned char *ee_data = tp->eeprom; + int i; + + tp->mtable = NULL; + /* Detect an old-style (SA only) EEPROM layout: + memcmp(eedata, eedata+16, 8). */ + for (i = 0; i < 8; i ++) + if (ee_data[i] != ee_data[16+i]) + break; + if (i >= 8) { + if (ee_data[0] == 0xff) { + if (last_mediatable) { + controller_index++; + pr_info("%s: Controller %d of multiport board\n", + dev->name, controller_index); + tp->mtable = last_mediatable; + ee_data = last_ee_data; + goto subsequent_board; + } else + pr_info("%s: Missing EEPROM, this interface may not work correctly!\n", + dev->name); + return; + } + /* Do a fix-up based on the vendor half of the station address prefix. */ + for (i = 0; eeprom_fixups[i].name; i++) { + if (dev->dev_addr[0] == eeprom_fixups[i].addr0 && + dev->dev_addr[1] == eeprom_fixups[i].addr1 && + dev->dev_addr[2] == eeprom_fixups[i].addr2) { + if (dev->dev_addr[2] == 0xE8 && ee_data[0x1a] == 0x55) + i++; /* An Accton EN1207, not an outlaw Maxtech. */ + memcpy(ee_data + 26, eeprom_fixups[i].newtable, + sizeof(eeprom_fixups[i].newtable)); + pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n", + dev->name, eeprom_fixups[i].name); + break; + } + } + if (eeprom_fixups[i].name == NULL) { /* No fixup found. */ + pr_info("%s: Old style EEPROM with no media selection information\n", + dev->name); + return; + } + } + + controller_index = 0; + if (ee_data[19] > 1) { /* Multiport board. */ + last_ee_data = ee_data; + } +subsequent_board: + + if (ee_data[27] == 0) { /* No valid media table. */ + tulip_build_fake_mediatable(tp); + } else { + unsigned char *p = (void *)ee_data + ee_data[27]; + unsigned char csr12dir = 0; + int count, new_advertise = 0; + struct mediatable *mtable; + u16 media = get_u16(p); + + p += 2; + if (tp->flags & CSR12_IN_SROM) + csr12dir = *p++; + count = *p++; + + /* there is no phy information, don't even try to build mtable */ + if (count == 0) { + if (tulip_debug > 0) + pr_warn("%s: no phy info, aborting mtable build\n", + dev->name); + return; + } + + mtable = kmalloc(sizeof(struct mediatable) + + count * sizeof(struct medialeaf), + GFP_KERNEL); + if (mtable == NULL) + return; /* Horrible, impossible failure. */ + last_mediatable = tp->mtable = mtable; + mtable->defaultmedia = media; + mtable->leafcount = count; + mtable->csr12dir = csr12dir; + mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0; + mtable->csr15dir = mtable->csr15val = 0; + + pr_info("%s: EEPROM default media type %s\n", + dev->name, + media & 0x0800 ? "Autosense" + : medianame[media & MEDIA_MASK]); + for (i = 0; i < count; i++) { + struct medialeaf *leaf = &mtable->mleaf[i]; + + if ((p[0] & 0x80) == 0) { /* 21140 Compact block. */ + leaf->type = 0; + leaf->media = p[0] & 0x3f; + leaf->leafdata = p; + if ((p[2] & 0x61) == 0x01) /* Bogus, but Znyx boards do it. */ + mtable->has_mii = 1; + p += 4; + } else { + leaf->type = p[1]; + if (p[1] == 0x05) { + mtable->has_reset = i; + leaf->media = p[2] & 0x0f; + } else if (tp->chip_id == DM910X && p[1] == 0x80) { + /* Hack to ignore Davicom delay period block */ + mtable->leafcount--; + count--; + i--; + leaf->leafdata = p + 2; + p += (p[0] & 0x3f) + 1; + continue; + } else if (p[1] & 1) { + int gpr_len, reset_len; + + mtable->has_mii = 1; + leaf->media = 11; + gpr_len=p[3]*2; + reset_len=p[4+gpr_len]*2; + new_advertise |= get_u16(&p[7+gpr_len+reset_len]); + } else { + mtable->has_nonmii = 1; + leaf->media = p[2] & MEDIA_MASK; + /* Davicom's media number for 100BaseTX is strange */ + if (tp->chip_id == DM910X && leaf->media == 1) + leaf->media = 3; + switch (leaf->media) { + case 0: new_advertise |= 0x0020; break; + case 4: new_advertise |= 0x0040; break; + case 3: new_advertise |= 0x0080; break; + case 5: new_advertise |= 0x0100; break; + case 6: new_advertise |= 0x0200; break; + } + if (p[1] == 2 && leaf->media == 0) { + if (p[2] & 0x40) { + u32 base15 = get_unaligned((u16*)&p[7]); + mtable->csr15dir = + (get_unaligned((u16*)&p[9])<<16) + base15; + mtable->csr15val = + (get_unaligned((u16*)&p[11])<<16) + base15; + } else { + mtable->csr15dir = get_unaligned((u16*)&p[3])<<16; + mtable->csr15val = get_unaligned((u16*)&p[5])<<16; + } + } + } + leaf->leafdata = p + 2; + p += (p[0] & 0x3f) + 1; + } + if (tulip_debug > 1 && leaf->media == 11) { + unsigned char *bp = leaf->leafdata; + pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n", + dev->name, + bp[0], bp[1], bp[2 + bp[1]*2], + bp[5 + bp[2 + bp[1]*2]*2], + bp[4 + bp[2 + bp[1]*2]*2]); + } + pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n", + dev->name, + i, medianame[leaf->media & 15], leaf->media, + leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>", + leaf->type); + } + if (new_advertise) + tp->sym_advertise = new_advertise; + } +} +/* Reading a serial EEPROM is a "bit" grungy, but we work our way through:->.*/ + +/* EEPROM_Ctrl bits. */ +#define EE_SHIFT_CLK 0x02 /* EEPROM shift clock. */ +#define EE_CS 0x01 /* EEPROM chip select. */ +#define EE_DATA_WRITE 0x04 /* Data from the Tulip to EEPROM. */ +#define EE_WRITE_0 0x01 +#define EE_WRITE_1 0x05 +#define EE_DATA_READ 0x08 /* Data from the EEPROM chip. */ +#define EE_ENB (0x4800 | EE_CS) + +/* Delay between EEPROM clock transitions. + Even at 33Mhz current PCI implementations don't overrun the EEPROM clock. + We add a bus turn-around to insure that this remains true. */ +#define eeprom_delay() ioread32(ee_addr) + +/* The EEPROM commands include the alway-set leading bit. */ +#define EE_READ_CMD (6) + +/* Note: this routine returns extra data bits for size detection. */ +int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_len) +{ + int i; + unsigned retval = 0; + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ee_addr = tp->base_addr + CSR9; + int read_cmd = location | (EE_READ_CMD << addr_len); + + /* If location is past the end of what we can address, don't + * read some other location (ie truncate). Just return zero. + */ + if (location > (1 << addr_len) - 1) + return 0; + + iowrite32(EE_ENB & ~EE_CS, ee_addr); + iowrite32(EE_ENB, ee_addr); + + /* Shift the read command bits out. */ + for (i = 4 + addr_len; i >= 0; i--) { + short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + iowrite32(EE_ENB | dataval, ee_addr); + eeprom_delay(); + iowrite32(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); + eeprom_delay(); + retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0); + } + iowrite32(EE_ENB, ee_addr); + eeprom_delay(); + + for (i = 16; i > 0; i--) { + iowrite32(EE_ENB | EE_SHIFT_CLK, ee_addr); + eeprom_delay(); + retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0); + iowrite32(EE_ENB, ee_addr); + eeprom_delay(); + } + + /* Terminate the EEPROM access. */ + iowrite32(EE_ENB & ~EE_CS, ee_addr); + return (tp->flags & HAS_SWAPPED_SEEPROM) ? swab16(retval) : retval; +} + diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c new file mode 100644 index 00000000000..5350d753e0f --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/interrupt.c @@ -0,0 +1,811 @@ +/* + drivers/net/tulip/interrupt.c + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + Please submit bugs to http://bugzilla.kernel.org/ . + +*/ + +#include <linux/pci.h> +#include "tulip.h" +#include <linux/etherdevice.h> + +int tulip_rx_copybreak; +unsigned int tulip_max_interrupt_work; + +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION +#define MIT_SIZE 15 +#define MIT_TABLE 15 /* We use 0 or max */ + +static unsigned int mit_table[MIT_SIZE+1] = +{ + /* CRS11 21143 hardware Mitigation Control Interrupt + We use only RX mitigation we other techniques for + TX intr. mitigation. + + 31 Cycle Size (timer control) + 30:27 TX timer in 16 * Cycle size + 26:24 TX No pkts before Int. + 23:20 RX timer in Cycle size + 19:17 RX No pkts before Int. + 16 Continues Mode (CM) + */ + + 0x0, /* IM disabled */ + 0x80150000, /* RX time = 1, RX pkts = 2, CM = 1 */ + 0x80150000, + 0x80270000, + 0x80370000, + 0x80490000, + 0x80590000, + 0x80690000, + 0x807B0000, + 0x808B0000, + 0x809D0000, + 0x80AD0000, + 0x80BD0000, + 0x80CF0000, + 0x80DF0000, +// 0x80FF0000 /* RX time = 16, RX pkts = 7, CM = 1 */ + 0x80F10000 /* RX time = 16, RX pkts = 0, CM = 1 */ +}; +#endif + + +int tulip_refill_rx(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int entry; + int refilled = 0; + + /* Refill the Rx ring buffers. */ + for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) { + entry = tp->dirty_rx % RX_RING_SIZE; + if (tp->rx_buffers[entry].skb == NULL) { + struct sk_buff *skb; + dma_addr_t mapping; + + skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ); + if (skb == NULL) + break; + + mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ, + PCI_DMA_FROMDEVICE); + tp->rx_buffers[entry].mapping = mapping; + + skb->dev = dev; /* Mark as being used by this device. */ + tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping); + refilled++; + } + tp->rx_ring[entry].status = cpu_to_le32(DescOwned); + } + if(tp->chip_id == LC82C168) { + if(((ioread32(tp->base_addr + CSR5)>>17)&0x07) == 4) { + /* Rx stopped due to out of buffers, + * restart it + */ + iowrite32(0x01, tp->base_addr + CSR2); + } + } + return refilled; +} + +#ifdef CONFIG_TULIP_NAPI + +void oom_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + napi_schedule(&tp->napi); +} + +int tulip_poll(struct napi_struct *napi, int budget) +{ + struct tulip_private *tp = container_of(napi, struct tulip_private, napi); + struct net_device *dev = tp->dev; + int entry = tp->cur_rx % RX_RING_SIZE; + int work_done = 0; +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + int received = 0; +#endif + +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + +/* that one buffer is needed for mit activation; or might be a + bug in the ring buffer code; check later -- JHS*/ + + if (budget >=RX_RING_SIZE) budget--; +#endif + + if (tulip_debug > 4) + netdev_dbg(dev, " In tulip_rx(), entry %d %08x\n", + entry, tp->rx_ring[entry].status); + + do { + if (ioread32(tp->base_addr + CSR5) == 0xffffffff) { + netdev_dbg(dev, " In tulip_poll(), hardware disappeared\n"); + break; + } + /* Acknowledge current RX interrupt sources. */ + iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5); + + + /* If we own the next entry, it is a new packet. Send it up. */ + while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) { + s32 status = le32_to_cpu(tp->rx_ring[entry].status); + short pkt_len; + + if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx) + break; + + if (tulip_debug > 5) + netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n", + entry, status); + + if (++work_done >= budget) + goto not_done; + + /* + * Omit the four octet CRC from the length. + * (May not be considered valid until we have + * checked status for RxLengthOver2047 bits) + */ + pkt_len = ((status >> 16) & 0x7ff) - 4; + + /* + * Maximum pkt_len is 1518 (1514 + vlan header) + * Anything higher than this is always invalid + * regardless of RxLengthOver2047 bits + */ + + if ((status & (RxLengthOver2047 | + RxDescCRCError | + RxDescCollisionSeen | + RxDescRunt | + RxDescDescErr | + RxWholePkt)) != RxWholePkt || + pkt_len > 1518) { + if ((status & (RxLengthOver2047 | + RxWholePkt)) != RxWholePkt) { + /* Ingore earlier buffers. */ + if ((status & 0xffff) != 0x7fff) { + if (tulip_debug > 1) + dev_warn(&dev->dev, + "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", + status); + dev->stats.rx_length_errors++; + } + } else { + /* There was a fatal error. */ + if (tulip_debug > 2) + netdev_dbg(dev, "Receive error, Rx status %08x\n", + status); + dev->stats.rx_errors++; /* end of a packet.*/ + if (pkt_len > 1518 || + (status & RxDescRunt)) + dev->stats.rx_length_errors++; + + if (status & 0x0004) + dev->stats.rx_frame_errors++; + if (status & 0x0002) + dev->stats.rx_crc_errors++; + if (status & 0x0001) + dev->stats.rx_fifo_errors++; + } + } else { + struct sk_buff *skb; + + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < tulip_rx_copybreak && + (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* 16 byte align the IP header */ + pci_dma_sync_single_for_cpu(tp->pdev, + tp->rx_buffers[entry].mapping, + pkt_len, PCI_DMA_FROMDEVICE); +#if ! defined(__alpha__) + skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data, + pkt_len); + skb_put(skb, pkt_len); +#else + memcpy(skb_put(skb, pkt_len), + tp->rx_buffers[entry].skb->data, + pkt_len); +#endif + pci_dma_sync_single_for_device(tp->pdev, + tp->rx_buffers[entry].mapping, + pkt_len, PCI_DMA_FROMDEVICE); + } else { /* Pass up the skb already on the Rx ring. */ + char *temp = skb_put(skb = tp->rx_buffers[entry].skb, + pkt_len); + +#ifndef final_version + if (tp->rx_buffers[entry].mapping != + le32_to_cpu(tp->rx_ring[entry].buffer1)) { + dev_err(&dev->dev, + "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n", + le32_to_cpu(tp->rx_ring[entry].buffer1), + (unsigned long long)tp->rx_buffers[entry].mapping, + skb->head, temp); + } +#endif + + pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + + tp->rx_buffers[entry].skb = NULL; + tp->rx_buffers[entry].mapping = 0; + } + skb->protocol = eth_type_trans(skb, dev); + + netif_receive_skb(skb); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + received++; +#endif + + entry = (++tp->cur_rx) % RX_RING_SIZE; + if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4) + tulip_refill_rx(dev); + + } + + /* New ack strategy... irq does not ack Rx any longer + hopefully this helps */ + + /* Really bad things can happen here... If new packet arrives + * and an irq arrives (tx or just due to occasionally unset + * mask), it will be acked by irq handler, but new thread + * is not scheduled. It is major hole in design. + * No idea how to fix this if "playing with fire" will fail + * tomorrow (night 011029). If it will not fail, we won + * finally: amount of IO did not increase at all. */ + } while ((ioread32(tp->base_addr + CSR5) & RxIntr)); + + #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + + /* We use this simplistic scheme for IM. It's proven by + real life installations. We can have IM enabled + continuesly but this would cause unnecessary latency. + Unfortunely we can't use all the NET_RX_* feedback here. + This would turn on IM for devices that is not contributing + to backlog congestion with unnecessary latency. + + We monitor the device RX-ring and have: + + HW Interrupt Mitigation either ON or OFF. + + ON: More then 1 pkt received (per intr.) OR we are dropping + OFF: Only 1 pkt received + + Note. We only use min and max (0, 15) settings from mit_table */ + + + if( tp->flags & HAS_INTR_MITIGATION) { + if( received > 1 ) { + if( ! tp->mit_on ) { + tp->mit_on = 1; + iowrite32(mit_table[MIT_TABLE], tp->base_addr + CSR11); + } + } + else { + if( tp->mit_on ) { + tp->mit_on = 0; + iowrite32(0, tp->base_addr + CSR11); + } + } + } + +#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */ + + tulip_refill_rx(dev); + + /* If RX ring is not full we are out of memory. */ + if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) + goto oom; + + /* Remove us from polling list and enable RX intr. */ + + napi_complete(napi); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7); + + /* The last op happens after poll completion. Which means the following: + * 1. it can race with disabling irqs in irq handler + * 2. it can race with dise/enabling irqs in other poll threads + * 3. if an irq raised after beginning loop, it will be immediately + * triggered here. + * + * Summarizing: the logic results in some redundant irqs both + * due to races in masking and due to too late acking of already + * processed irqs. But it must not result in losing events. + */ + + return work_done; + + not_done: + if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 || + tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) + tulip_refill_rx(dev); + + if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) + goto oom; + + return work_done; + + oom: /* Executed with RX ints disabled */ + + /* Start timer, stop polling, but do not enable rx interrupts. */ + mod_timer(&tp->oom_timer, jiffies+1); + + /* Think: timer_pending() was an explicit signature of bug. + * Timer can be pending now but fired and completed + * before we did napi_complete(). See? We would lose it. */ + + /* remove ourselves from the polling list */ + napi_complete(napi); + + return work_done; +} + +#else /* CONFIG_TULIP_NAPI */ + +static int tulip_rx(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int entry = tp->cur_rx % RX_RING_SIZE; + int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx; + int received = 0; + + if (tulip_debug > 4) + netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n", + entry, tp->rx_ring[entry].status); + /* If we own the next entry, it is a new packet. Send it up. */ + while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) { + s32 status = le32_to_cpu(tp->rx_ring[entry].status); + short pkt_len; + + if (tulip_debug > 5) + netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n", + entry, status); + if (--rx_work_limit < 0) + break; + + /* + Omit the four octet CRC from the length. + (May not be considered valid until we have + checked status for RxLengthOver2047 bits) + */ + pkt_len = ((status >> 16) & 0x7ff) - 4; + /* + Maximum pkt_len is 1518 (1514 + vlan header) + Anything higher than this is always invalid + regardless of RxLengthOver2047 bits + */ + + if ((status & (RxLengthOver2047 | + RxDescCRCError | + RxDescCollisionSeen | + RxDescRunt | + RxDescDescErr | + RxWholePkt)) != RxWholePkt || + pkt_len > 1518) { + if ((status & (RxLengthOver2047 | + RxWholePkt)) != RxWholePkt) { + /* Ingore earlier buffers. */ + if ((status & 0xffff) != 0x7fff) { + if (tulip_debug > 1) + netdev_warn(dev, + "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", + status); + dev->stats.rx_length_errors++; + } + } else { + /* There was a fatal error. */ + if (tulip_debug > 2) + netdev_dbg(dev, "Receive error, Rx status %08x\n", + status); + dev->stats.rx_errors++; /* end of a packet.*/ + if (pkt_len > 1518 || + (status & RxDescRunt)) + dev->stats.rx_length_errors++; + if (status & 0x0004) + dev->stats.rx_frame_errors++; + if (status & 0x0002) + dev->stats.rx_crc_errors++; + if (status & 0x0001) + dev->stats.rx_fifo_errors++; + } + } else { + struct sk_buff *skb; + + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < tulip_rx_copybreak && + (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* 16 byte align the IP header */ + pci_dma_sync_single_for_cpu(tp->pdev, + tp->rx_buffers[entry].mapping, + pkt_len, PCI_DMA_FROMDEVICE); +#if ! defined(__alpha__) + skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data, + pkt_len); + skb_put(skb, pkt_len); +#else + memcpy(skb_put(skb, pkt_len), + tp->rx_buffers[entry].skb->data, + pkt_len); +#endif + pci_dma_sync_single_for_device(tp->pdev, + tp->rx_buffers[entry].mapping, + pkt_len, PCI_DMA_FROMDEVICE); + } else { /* Pass up the skb already on the Rx ring. */ + char *temp = skb_put(skb = tp->rx_buffers[entry].skb, + pkt_len); + +#ifndef final_version + if (tp->rx_buffers[entry].mapping != + le32_to_cpu(tp->rx_ring[entry].buffer1)) { + dev_err(&dev->dev, + "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n", + le32_to_cpu(tp->rx_ring[entry].buffer1), + (long long)tp->rx_buffers[entry].mapping, + skb->head, temp); + } +#endif + + pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + + tp->rx_buffers[entry].skb = NULL; + tp->rx_buffers[entry].mapping = 0; + } + skb->protocol = eth_type_trans(skb, dev); + + netif_rx(skb); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } + received++; + entry = (++tp->cur_rx) % RX_RING_SIZE; + } + return received; +} +#endif /* CONFIG_TULIP_NAPI */ + +static inline unsigned int phy_interrupt (struct net_device *dev) +{ +#ifdef __hppa__ + struct tulip_private *tp = netdev_priv(dev); + int csr12 = ioread32(tp->base_addr + CSR12) & 0xff; + + if (csr12 != tp->csr12_shadow) { + /* ack interrupt */ + iowrite32(csr12 | 0x02, tp->base_addr + CSR12); + tp->csr12_shadow = csr12; + /* do link change stuff */ + spin_lock(&tp->lock); + tulip_check_duplex(dev); + spin_unlock(&tp->lock); + /* clear irq ack bit */ + iowrite32(csr12 & ~0x02, tp->base_addr + CSR12); + + return 1; + } +#endif + + return 0; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +irqreturn_t tulip_interrupt(int irq, void *dev_instance) +{ + struct net_device *dev = (struct net_device *)dev_instance; + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr5; + int missed; + int rx = 0; + int tx = 0; + int oi = 0; + int maxrx = RX_RING_SIZE; + int maxtx = TX_RING_SIZE; + int maxoi = TX_RING_SIZE; +#ifdef CONFIG_TULIP_NAPI + int rxd = 0; +#else + int entry; +#endif + unsigned int work_count = tulip_max_interrupt_work; + unsigned int handled = 0; + + /* Let's see whether the interrupt really is for us */ + csr5 = ioread32(ioaddr + CSR5); + + if (tp->flags & HAS_PHY_IRQ) + handled = phy_interrupt (dev); + + if ((csr5 & (NormalIntr|AbnormalIntr)) == 0) + return IRQ_RETVAL(handled); + + tp->nir++; + + do { + +#ifdef CONFIG_TULIP_NAPI + + if (!rxd && (csr5 & (RxIntr | RxNoBuf))) { + rxd++; + /* Mask RX intrs and add the device to poll list. */ + iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7); + napi_schedule(&tp->napi); + + if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass))) + break; + } + + /* Acknowledge the interrupt sources we handle here ASAP + the poll function does Rx and RxNoBuf acking */ + + iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5); + +#else + /* Acknowledge all of the current interrupt sources ASAP. */ + iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5); + + + if (csr5 & (RxIntr | RxNoBuf)) { + rx += tulip_rx(dev); + tulip_refill_rx(dev); + } + +#endif /* CONFIG_TULIP_NAPI */ + + if (tulip_debug > 4) + netdev_dbg(dev, "interrupt csr5=%#8.8x new csr5=%#8.8x\n", + csr5, ioread32(ioaddr + CSR5)); + + + if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) { + unsigned int dirty_tx; + + spin_lock(&tp->lock); + + for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0; + dirty_tx++) { + int entry = dirty_tx % TX_RING_SIZE; + int status = le32_to_cpu(tp->tx_ring[entry].status); + + if (status < 0) + break; /* It still has not been Txed */ + + /* Check for Rx filter setup frames. */ + if (tp->tx_buffers[entry].skb == NULL) { + /* test because dummy frames not mapped */ + if (tp->tx_buffers[entry].mapping) + pci_unmap_single(tp->pdev, + tp->tx_buffers[entry].mapping, + sizeof(tp->setup_frame), + PCI_DMA_TODEVICE); + continue; + } + + if (status & 0x8000) { + /* There was an major error, log it. */ +#ifndef final_version + if (tulip_debug > 1) + netdev_dbg(dev, "Transmit error, Tx status %08x\n", + status); +#endif + dev->stats.tx_errors++; + if (status & 0x4104) + dev->stats.tx_aborted_errors++; + if (status & 0x0C00) + dev->stats.tx_carrier_errors++; + if (status & 0x0200) + dev->stats.tx_window_errors++; + if (status & 0x0002) + dev->stats.tx_fifo_errors++; + if ((status & 0x0080) && tp->full_duplex == 0) + dev->stats.tx_heartbeat_errors++; + } else { + dev->stats.tx_bytes += + tp->tx_buffers[entry].skb->len; + dev->stats.collisions += (status >> 3) & 15; + dev->stats.tx_packets++; + } + + pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping, + tp->tx_buffers[entry].skb->len, + PCI_DMA_TODEVICE); + + /* Free the original skb. */ + dev_kfree_skb_irq(tp->tx_buffers[entry].skb); + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + tx++; + } + +#ifndef final_version + if (tp->cur_tx - dirty_tx > TX_RING_SIZE) { + dev_err(&dev->dev, + "Out-of-sync dirty pointer, %d vs. %d\n", + dirty_tx, tp->cur_tx); + dirty_tx += TX_RING_SIZE; + } +#endif + + if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2) + netif_wake_queue(dev); + + tp->dirty_tx = dirty_tx; + if (csr5 & TxDied) { + if (tulip_debug > 2) + dev_warn(&dev->dev, + "The transmitter stopped. CSR5 is %x, CSR6 %x, new CSR6 %x\n", + csr5, ioread32(ioaddr + CSR6), + tp->csr6); + tulip_restart_rxtx(tp); + } + spin_unlock(&tp->lock); + } + + /* Log errors. */ + if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */ + if (csr5 == 0xffffffff) + break; + if (csr5 & TxJabber) + dev->stats.tx_errors++; + if (csr5 & TxFIFOUnderflow) { + if ((tp->csr6 & 0xC000) != 0xC000) + tp->csr6 += 0x4000; /* Bump up the Tx threshold */ + else + tp->csr6 |= 0x00200000; /* Store-n-forward. */ + /* Restart the transmit process. */ + tulip_restart_rxtx(tp); + iowrite32(0, ioaddr + CSR1); + } + if (csr5 & (RxDied | RxNoBuf)) { + if (tp->flags & COMET_MAC_ADDR) { + iowrite32(tp->mc_filter[0], ioaddr + 0xAC); + iowrite32(tp->mc_filter[1], ioaddr + 0xB0); + } + } + if (csr5 & RxDied) { /* Missed a Rx frame. */ + dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff; + dev->stats.rx_errors++; + tulip_start_rxtx(tp); + } + /* + * NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this + * call is ever done under the spinlock + */ + if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) { + if (tp->link_change) + (tp->link_change)(dev, csr5); + } + if (csr5 & SystemError) { + int error = (csr5 >> 23) & 7; + /* oops, we hit a PCI error. The code produced corresponds + * to the reason: + * 0 - parity error + * 1 - master abort + * 2 - target abort + * Note that on parity error, we should do a software reset + * of the chip to get it back into a sane state (according + * to the 21142/3 docs that is). + * -- rmk + */ + dev_err(&dev->dev, + "(%lu) System Error occurred (%d)\n", + tp->nir, error); + } + /* Clear all error sources, included undocumented ones! */ + iowrite32(0x0800f7ba, ioaddr + CSR5); + oi++; + } + if (csr5 & TimerInt) { + + if (tulip_debug > 2) + dev_err(&dev->dev, + "Re-enabling interrupts, %08x\n", + csr5); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); + tp->ttimer = 0; + oi++; + } + if (tx > maxtx || rx > maxrx || oi > maxoi) { + if (tulip_debug > 1) + dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n", + csr5, tp->nir, tx, rx, oi); + + /* Acknowledge all interrupt sources. */ + iowrite32(0x8001ffff, ioaddr + CSR5); + if (tp->flags & HAS_INTR_MITIGATION) { + /* Josip Loncaric at ICASE did extensive experimentation + to develop a good interrupt mitigation setting.*/ + iowrite32(0x8b240000, ioaddr + CSR11); + } else if (tp->chip_id == LC82C168) { + /* the LC82C168 doesn't have a hw timer.*/ + iowrite32(0x00, ioaddr + CSR7); + mod_timer(&tp->timer, RUN_AT(HZ/50)); + } else { + /* Mask all interrupting sources, set timer to + re-enable. */ + iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7); + iowrite32(0x0012, ioaddr + CSR11); + } + break; + } + + work_count--; + if (work_count == 0) + break; + + csr5 = ioread32(ioaddr + CSR5); + +#ifdef CONFIG_TULIP_NAPI + if (rxd) + csr5 &= ~RxPollInt; + } while ((csr5 & (TxNoBuf | + TxDied | + TxIntr | + TimerInt | + /* Abnormal intr. */ + RxDied | + TxFIFOUnderflow | + TxJabber | + TPLnkFail | + SystemError )) != 0); +#else + } while ((csr5 & (NormalIntr|AbnormalIntr)) != 0); + + tulip_refill_rx(dev); + + /* check if the card is in suspend mode */ + entry = tp->dirty_rx % RX_RING_SIZE; + if (tp->rx_buffers[entry].skb == NULL) { + if (tulip_debug > 1) + dev_warn(&dev->dev, + "in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", + tp->nir, tp->cur_rx, tp->ttimer, rx); + if (tp->chip_id == LC82C168) { + iowrite32(0x00, ioaddr + CSR7); + mod_timer(&tp->timer, RUN_AT(HZ/50)); + } else { + if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) { + if (tulip_debug > 1) + dev_warn(&dev->dev, + "in rx suspend mode: (%lu) set timer\n", + tp->nir); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt, + ioaddr + CSR7); + iowrite32(TimerInt, ioaddr + CSR5); + iowrite32(12, ioaddr + CSR11); + tp->ttimer = 1; + } + } + } +#endif /* CONFIG_TULIP_NAPI */ + + if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) { + dev->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed; + } + + if (tulip_debug > 4) + netdev_dbg(dev, "exiting interrupt, csr5=%#04x\n", + ioread32(ioaddr + CSR5)); + + return IRQ_HANDLED; +} diff --git a/drivers/net/ethernet/dec/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c new file mode 100644 index 00000000000..4bd13922875 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/media.c @@ -0,0 +1,556 @@ +/* + drivers/net/tulip/media.c + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + + Please submit bugs to http://bugzilla.kernel.org/ . +*/ + +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include "tulip.h" + + +/* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually + met by back-to-back PCI I/O cycles, but we insert a delay to avoid + "overclocking" issues or future 66Mhz PCI. */ +#define mdio_delay() ioread32(mdio_addr) + +/* Read and write the MII registers using software-generated serial + MDIO protocol. It is just different enough from the EEPROM protocol + to not share code. The maxium data clock rate is 2.5 Mhz. */ +#define MDIO_SHIFT_CLK 0x10000 +#define MDIO_DATA_WRITE0 0x00000 +#define MDIO_DATA_WRITE1 0x20000 +#define MDIO_ENB 0x00000 /* Ignore the 0x02000 databook setting. */ +#define MDIO_ENB_IN 0x40000 +#define MDIO_DATA_READ 0x80000 + +static const unsigned char comet_miireg2offset[32] = { + 0xB4, 0xB8, 0xBC, 0xC0, 0xC4, 0xC8, 0xCC, 0, 0,0,0,0, 0,0,0,0, + 0,0xD0,0,0, 0,0,0,0, 0,0,0,0, 0, 0xD4, 0xD8, 0xDC, }; + + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. + See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions") + or DP83840A data sheet for more details. + */ + +int tulip_mdio_read(struct net_device *dev, int phy_id, int location) +{ + struct tulip_private *tp = netdev_priv(dev); + int i; + int read_cmd = (0xf6 << 10) | ((phy_id & 0x1f) << 5) | location; + int retval = 0; + void __iomem *ioaddr = tp->base_addr; + void __iomem *mdio_addr = ioaddr + CSR9; + unsigned long flags; + + if (location & ~0x1f) + return 0xffff; + + if (tp->chip_id == COMET && phy_id == 30) { + if (comet_miireg2offset[location]) + return ioread32(ioaddr + comet_miireg2offset[location]); + return 0xffff; + } + + spin_lock_irqsave(&tp->mii_lock, flags); + if (tp->chip_id == LC82C168) { + iowrite32(0x60020000 + (phy_id<<23) + (location<<18), ioaddr + 0xA0); + ioread32(ioaddr + 0xA0); + ioread32(ioaddr + 0xA0); + for (i = 1000; i >= 0; --i) { + barrier(); + if ( ! ((retval = ioread32(ioaddr + 0xA0)) & 0x80000000)) + break; + } + spin_unlock_irqrestore(&tp->mii_lock, flags); + return retval & 0xffff; + } + + /* Establish sync by sending at least 32 logic ones. */ + for (i = 32; i >= 0; i--) { + iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); + mdio_delay(); + iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); + mdio_delay(); + } + /* Shift the read command bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; + + iowrite32(MDIO_ENB | dataval, mdio_addr); + mdio_delay(); + iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); + mdio_delay(); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + iowrite32(MDIO_ENB_IN, mdio_addr); + mdio_delay(); + retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); + iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); + mdio_delay(); + } + + spin_unlock_irqrestore(&tp->mii_lock, flags); + return (retval>>1) & 0xffff; +} + +void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) +{ + struct tulip_private *tp = netdev_priv(dev); + int i; + int cmd = (0x5002 << 16) | ((phy_id & 0x1f) << 23) | (location<<18) | (val & 0xffff); + void __iomem *ioaddr = tp->base_addr; + void __iomem *mdio_addr = ioaddr + CSR9; + unsigned long flags; + + if (location & ~0x1f) + return; + + if (tp->chip_id == COMET && phy_id == 30) { + if (comet_miireg2offset[location]) + iowrite32(val, ioaddr + comet_miireg2offset[location]); + return; + } + + spin_lock_irqsave(&tp->mii_lock, flags); + if (tp->chip_id == LC82C168) { + iowrite32(cmd, ioaddr + 0xA0); + for (i = 1000; i >= 0; --i) { + barrier(); + if ( ! (ioread32(ioaddr + 0xA0) & 0x80000000)) + break; + } + spin_unlock_irqrestore(&tp->mii_lock, flags); + return; + } + + /* Establish sync by sending 32 logic ones. */ + for (i = 32; i >= 0; i--) { + iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); + mdio_delay(); + iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); + mdio_delay(); + } + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; + iowrite32(MDIO_ENB | dataval, mdio_addr); + mdio_delay(); + iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); + mdio_delay(); + } + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + iowrite32(MDIO_ENB_IN, mdio_addr); + mdio_delay(); + iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); + mdio_delay(); + } + + spin_unlock_irqrestore(&tp->mii_lock, flags); +} + + +/* Set up the transceiver control registers for the selected media type. */ +void tulip_select_media(struct net_device *dev, int startup) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + struct mediatable *mtable = tp->mtable; + u32 new_csr6; + int i; + + if (mtable) { + struct medialeaf *mleaf = &mtable->mleaf[tp->cur_index]; + unsigned char *p = mleaf->leafdata; + switch (mleaf->type) { + case 0: /* 21140 non-MII xcvr. */ + if (tulip_debug > 1) + netdev_dbg(dev, "Using a 21140 non-MII transceiver with control setting %02x\n", + p[1]); + dev->if_port = p[0]; + if (startup) + iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12); + iowrite32(p[1], ioaddr + CSR12); + new_csr6 = 0x02000000 | ((p[2] & 0x71) << 18); + break; + case 2: case 4: { + u16 setup[5]; + u32 csr13val, csr14val, csr15dir, csr15val; + for (i = 0; i < 5; i++) + setup[i] = get_u16(&p[i*2 + 1]); + + dev->if_port = p[0] & MEDIA_MASK; + if (tulip_media_cap[dev->if_port] & MediaAlwaysFD) + tp->full_duplex = 1; + + if (startup && mtable->has_reset) { + struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset]; + unsigned char *rst = rleaf->leafdata; + if (tulip_debug > 1) + netdev_dbg(dev, "Resetting the transceiver\n"); + for (i = 0; i < rst[0]; i++) + iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15); + } + if (tulip_debug > 1) + netdev_dbg(dev, "21143 non-MII %s transceiver control %04x/%04x\n", + medianame[dev->if_port], + setup[0], setup[1]); + if (p[0] & 0x40) { /* SIA (CSR13-15) setup values are provided. */ + csr13val = setup[0]; + csr14val = setup[1]; + csr15dir = (setup[3]<<16) | setup[2]; + csr15val = (setup[4]<<16) | setup[2]; + iowrite32(0, ioaddr + CSR13); + iowrite32(csr14val, ioaddr + CSR14); + iowrite32(csr15dir, ioaddr + CSR15); /* Direction */ + iowrite32(csr15val, ioaddr + CSR15); /* Data */ + iowrite32(csr13val, ioaddr + CSR13); + } else { + csr13val = 1; + csr14val = 0; + csr15dir = (setup[0]<<16) | 0x0008; + csr15val = (setup[1]<<16) | 0x0008; + if (dev->if_port <= 4) + csr14val = t21142_csr14[dev->if_port]; + if (startup) { + iowrite32(0, ioaddr + CSR13); + iowrite32(csr14val, ioaddr + CSR14); + } + iowrite32(csr15dir, ioaddr + CSR15); /* Direction */ + iowrite32(csr15val, ioaddr + CSR15); /* Data */ + if (startup) iowrite32(csr13val, ioaddr + CSR13); + } + if (tulip_debug > 1) + netdev_dbg(dev, "Setting CSR15 to %08x/%08x\n", + csr15dir, csr15val); + if (mleaf->type == 4) + new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18); + else + new_csr6 = 0x82420000; + break; + } + case 1: case 3: { + int phy_num = p[0]; + int init_length = p[1]; + u16 *misc_info, tmp_info; + + dev->if_port = 11; + new_csr6 = 0x020E0000; + if (mleaf->type == 3) { /* 21142 */ + u16 *init_sequence = (u16*)(p+2); + u16 *reset_sequence = &((u16*)(p+3))[init_length]; + int reset_length = p[2 + init_length*2]; + misc_info = reset_sequence + reset_length; + if (startup) { + int timeout = 10; /* max 1 ms */ + for (i = 0; i < reset_length; i++) + iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15); + + /* flush posted writes */ + ioread32(ioaddr + CSR15); + + /* Sect 3.10.3 in DP83840A.pdf (p39) */ + udelay(500); + + /* Section 4.2 in DP83840A.pdf (p43) */ + /* and IEEE 802.3 "22.2.4.1.1 Reset" */ + while (timeout-- && + (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET)) + udelay(100); + } + for (i = 0; i < init_length; i++) + iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15); + + ioread32(ioaddr + CSR15); /* flush posted writes */ + } else { + u8 *init_sequence = p + 2; + u8 *reset_sequence = p + 3 + init_length; + int reset_length = p[2 + init_length]; + misc_info = (u16*)(reset_sequence + reset_length); + if (startup) { + int timeout = 10; /* max 1 ms */ + iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12); + for (i = 0; i < reset_length; i++) + iowrite32(reset_sequence[i], ioaddr + CSR12); + + /* flush posted writes */ + ioread32(ioaddr + CSR12); + + /* Sect 3.10.3 in DP83840A.pdf (p39) */ + udelay(500); + + /* Section 4.2 in DP83840A.pdf (p43) */ + /* and IEEE 802.3 "22.2.4.1.1 Reset" */ + while (timeout-- && + (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET)) + udelay(100); + } + for (i = 0; i < init_length; i++) + iowrite32(init_sequence[i], ioaddr + CSR12); + + ioread32(ioaddr + CSR12); /* flush posted writes */ + } + + tmp_info = get_u16(&misc_info[1]); + if (tmp_info) + tp->advertising[phy_num] = tmp_info | 1; + if (tmp_info && startup < 2) { + if (tp->mii_advertise == 0) + tp->mii_advertise = tp->advertising[phy_num]; + if (tulip_debug > 1) + netdev_dbg(dev, " Advertising %04x on MII %d\n", + tp->mii_advertise, + tp->phys[phy_num]); + tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise); + } + break; + } + case 5: case 6: { + u16 setup[5]; + + new_csr6 = 0; /* FIXME */ + + for (i = 0; i < 5; i++) + setup[i] = get_u16(&p[i*2 + 1]); + + if (startup && mtable->has_reset) { + struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset]; + unsigned char *rst = rleaf->leafdata; + if (tulip_debug > 1) + netdev_dbg(dev, "Resetting the transceiver\n"); + for (i = 0; i < rst[0]; i++) + iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15); + } + + break; + } + default: + netdev_dbg(dev, " Invalid media table selection %d\n", + mleaf->type); + new_csr6 = 0x020E0000; + } + if (tulip_debug > 1) + netdev_dbg(dev, "Using media type %s, CSR12 is %02x\n", + medianame[dev->if_port], + ioread32(ioaddr + CSR12) & 0xff); + } else if (tp->chip_id == LC82C168) { + if (startup && ! tp->medialock) + dev->if_port = tp->mii_cnt ? 11 : 0; + if (tulip_debug > 1) + netdev_dbg(dev, "PNIC PHY status is %3.3x, media %s\n", + ioread32(ioaddr + 0xB8), + medianame[dev->if_port]); + if (tp->mii_cnt) { + new_csr6 = 0x810C0000; + iowrite32(0x0001, ioaddr + CSR15); + iowrite32(0x0201B07A, ioaddr + 0xB8); + } else if (startup) { + /* Start with 10mbps to do autonegotiation. */ + iowrite32(0x32, ioaddr + CSR12); + new_csr6 = 0x00420000; + iowrite32(0x0001B078, ioaddr + 0xB8); + iowrite32(0x0201B078, ioaddr + 0xB8); + } else if (dev->if_port == 3 || dev->if_port == 5) { + iowrite32(0x33, ioaddr + CSR12); + new_csr6 = 0x01860000; + /* Trigger autonegotiation. */ + iowrite32(startup ? 0x0201F868 : 0x0001F868, ioaddr + 0xB8); + } else { + iowrite32(0x32, ioaddr + CSR12); + new_csr6 = 0x00420000; + iowrite32(0x1F078, ioaddr + 0xB8); + } + } else { /* Unknown chip type with no media table. */ + if (tp->default_port == 0) + dev->if_port = tp->mii_cnt ? 11 : 3; + if (tulip_media_cap[dev->if_port] & MediaIsMII) { + new_csr6 = 0x020E0000; + } else if (tulip_media_cap[dev->if_port] & MediaIsFx) { + new_csr6 = 0x02860000; + } else + new_csr6 = 0x03860000; + if (tulip_debug > 1) + netdev_dbg(dev, "No media description table, assuming %s transceiver, CSR12 %02x\n", + medianame[dev->if_port], + ioread32(ioaddr + CSR12)); + } + + tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0); + + mdelay(1); +} + +/* + Check the MII negotiated duplex and change the CSR6 setting if + required. + Return 0 if everything is OK. + Return < 0 if the transceiver is missing or has no link beat. + */ +int tulip_check_duplex(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + unsigned int bmsr, lpa, negotiated, new_csr6; + + bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR); + lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA); + if (tulip_debug > 1) + dev_info(&dev->dev, "MII status %04x, Link partner report %04x\n", + bmsr, lpa); + if (bmsr == 0xffff) + return -2; + if ((bmsr & BMSR_LSTATUS) == 0) { + int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR); + if ((new_bmsr & BMSR_LSTATUS) == 0) { + if (tulip_debug > 1) + dev_info(&dev->dev, + "No link beat on the MII interface, status %04x\n", + new_bmsr); + return -1; + } + } + negotiated = lpa & tp->advertising[0]; + tp->full_duplex = mii_duplex(tp->full_duplex_lock, negotiated); + + new_csr6 = tp->csr6; + + if (negotiated & LPA_100) new_csr6 &= ~TxThreshold; + else new_csr6 |= TxThreshold; + if (tp->full_duplex) new_csr6 |= FullDuplex; + else new_csr6 &= ~FullDuplex; + + if (new_csr6 != tp->csr6) { + tp->csr6 = new_csr6; + tulip_restart_rxtx(tp); + + if (tulip_debug > 0) + dev_info(&dev->dev, + "Setting %s-duplex based on MII#%d link partner capability of %04x\n", + tp->full_duplex ? "full" : "half", + tp->phys[0], lpa); + return 1; + } + + return 0; +} + +void __devinit tulip_find_mii (struct net_device *dev, int board_idx) +{ + struct tulip_private *tp = netdev_priv(dev); + int phyn, phy_idx = 0; + int mii_reg0; + int mii_advert; + unsigned int to_advert, new_bmcr, ane_switch; + + /* Find the connected MII xcvrs. + Doing this in open() would allow detecting external xcvrs later, + but takes much time. */ + for (phyn = 1; phyn <= 32 && phy_idx < sizeof (tp->phys); phyn++) { + int phy = phyn & 0x1f; + int mii_status = tulip_mdio_read (dev, phy, MII_BMSR); + if ((mii_status & 0x8301) == 0x8001 || + ((mii_status & BMSR_100BASE4) == 0 && + (mii_status & 0x7800) != 0)) { + /* preserve Becker logic, gain indentation level */ + } else { + continue; + } + + mii_reg0 = tulip_mdio_read (dev, phy, MII_BMCR); + mii_advert = tulip_mdio_read (dev, phy, MII_ADVERTISE); + ane_switch = 0; + + /* if not advertising at all, gen an + * advertising value from the capability + * bits in BMSR + */ + if ((mii_advert & ADVERTISE_ALL) == 0) { + unsigned int tmpadv = tulip_mdio_read (dev, phy, MII_BMSR); + mii_advert = ((tmpadv >> 6) & 0x3e0) | 1; + } + + if (tp->mii_advertise) { + tp->advertising[phy_idx] = + to_advert = tp->mii_advertise; + } else if (tp->advertising[phy_idx]) { + to_advert = tp->advertising[phy_idx]; + } else { + tp->advertising[phy_idx] = + tp->mii_advertise = + to_advert = mii_advert; + } + + tp->phys[phy_idx++] = phy; + + pr_info("tulip%d: MII transceiver #%d config %04x status %04x advertising %04x\n", + board_idx, phy, mii_reg0, mii_status, mii_advert); + + /* Fixup for DLink with miswired PHY. */ + if (mii_advert != to_advert) { + pr_debug("tulip%d: Advertising %04x on PHY %d, previously advertising %04x\n", + board_idx, to_advert, phy, mii_advert); + tulip_mdio_write (dev, phy, 4, to_advert); + } + + /* Enable autonegotiation: some boards default to off. */ + if (tp->default_port == 0) { + new_bmcr = mii_reg0 | BMCR_ANENABLE; + if (new_bmcr != mii_reg0) { + new_bmcr |= BMCR_ANRESTART; + ane_switch = 1; + } + } + /* ...or disable nway, if forcing media */ + else { + new_bmcr = mii_reg0 & ~BMCR_ANENABLE; + if (new_bmcr != mii_reg0) + ane_switch = 1; + } + + /* clear out bits we never want at this point */ + new_bmcr &= ~(BMCR_CTST | BMCR_FULLDPLX | BMCR_ISOLATE | + BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK | + BMCR_RESET); + + if (tp->full_duplex) + new_bmcr |= BMCR_FULLDPLX; + if (tulip_media_cap[tp->default_port] & MediaIs100) + new_bmcr |= BMCR_SPEED100; + + if (new_bmcr != mii_reg0) { + /* some phys need the ANE switch to + * happen before forced media settings + * will "take." However, we write the + * same value twice in order not to + * confuse the sane phys. + */ + if (ane_switch) { + tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr); + udelay (10); + } + tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr); + } + } + tp->mii_cnt = phy_idx; + if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) { + pr_info("tulip%d: ***WARNING***: No MII transceiver found!\n", + board_idx); + tp->phys[0] = 1; + } +} diff --git a/drivers/net/ethernet/dec/tulip/pnic.c b/drivers/net/ethernet/dec/tulip/pnic.c new file mode 100644 index 00000000000..52d898bdbeb --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/pnic.c @@ -0,0 +1,173 @@ +/* + drivers/net/tulip/pnic.c + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + + Please submit bugs to http://bugzilla.kernel.org/ . +*/ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include "tulip.h" + + +void pnic_do_nway(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + u32 phy_reg = ioread32(ioaddr + 0xB8); + u32 new_csr6 = tp->csr6 & ~0x40C40200; + + if (phy_reg & 0x78000000) { /* Ignore baseT4 */ + if (phy_reg & 0x20000000) dev->if_port = 5; + else if (phy_reg & 0x40000000) dev->if_port = 3; + else if (phy_reg & 0x10000000) dev->if_port = 4; + else if (phy_reg & 0x08000000) dev->if_port = 0; + tp->nwayset = 1; + new_csr6 = (dev->if_port & 1) ? 0x01860000 : 0x00420000; + iowrite32(0x32 | (dev->if_port & 1), ioaddr + CSR12); + if (dev->if_port & 1) + iowrite32(0x1F868, ioaddr + 0xB8); + if (phy_reg & 0x30000000) { + tp->full_duplex = 1; + new_csr6 |= 0x00000200; + } + if (tulip_debug > 1) + netdev_dbg(dev, "PNIC autonegotiated status %08x, %s\n", + phy_reg, medianame[dev->if_port]); + if (tp->csr6 != new_csr6) { + tp->csr6 = new_csr6; + /* Restart Tx */ + tulip_restart_rxtx(tp); + dev->trans_start = jiffies; + } + } +} + +void pnic_lnk_change(struct net_device *dev, int csr5) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int phy_reg = ioread32(ioaddr + 0xB8); + + if (tulip_debug > 1) + netdev_dbg(dev, "PNIC link changed state %08x, CSR5 %08x\n", + phy_reg, csr5); + if (ioread32(ioaddr + CSR5) & TPLnkFail) { + iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7); + /* If we use an external MII, then we mustn't use the + * internal negotiation. + */ + if (tulip_media_cap[dev->if_port] & MediaIsMII) + return; + if (! tp->nwayset || time_after(jiffies, dev_trans_start(dev) + 1*HZ)) { + tp->csr6 = 0x00420000 | (tp->csr6 & 0x0000fdff); + iowrite32(tp->csr6, ioaddr + CSR6); + iowrite32(0x30, ioaddr + CSR12); + iowrite32(0x0201F078, ioaddr + 0xB8); /* Turn on autonegotiation. */ + dev->trans_start = jiffies; + } + } else if (ioread32(ioaddr + CSR5) & TPLnkPass) { + if (tulip_media_cap[dev->if_port] & MediaIsMII) { + spin_lock(&tp->lock); + tulip_check_duplex(dev); + spin_unlock(&tp->lock); + } else { + pnic_do_nway(dev); + } + iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkPass) | TPLnkFail, ioaddr + CSR7); + } +} + +void pnic_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int next_tick = 60*HZ; + + if(!ioread32(ioaddr + CSR7)) { + /* the timer was called due to a work overflow + * in the interrupt handler. Skip the connection + * checks, the nic is definitively speaking with + * his link partner. + */ + goto too_good_connection; + } + + if (tulip_media_cap[dev->if_port] & MediaIsMII) { + spin_lock_irq(&tp->lock); + if (tulip_check_duplex(dev) > 0) + next_tick = 3*HZ; + spin_unlock_irq(&tp->lock); + } else { + int csr12 = ioread32(ioaddr + CSR12); + int new_csr6 = tp->csr6 & ~0x40C40200; + int phy_reg = ioread32(ioaddr + 0xB8); + int csr5 = ioread32(ioaddr + CSR5); + + if (tulip_debug > 1) + netdev_dbg(dev, "PNIC timer PHY status %08x, %s CSR5 %08x\n", + phy_reg, medianame[dev->if_port], csr5); + if (phy_reg & 0x04000000) { /* Remote link fault */ + iowrite32(0x0201F078, ioaddr + 0xB8); + next_tick = 1*HZ; + tp->nwayset = 0; + } else if (phy_reg & 0x78000000) { /* Ignore baseT4 */ + pnic_do_nway(dev); + next_tick = 60*HZ; + } else if (csr5 & TPLnkFail) { /* 100baseTx link beat */ + if (tulip_debug > 1) + netdev_dbg(dev, "%s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n", + medianame[dev->if_port], + csr12, + ioread32(ioaddr + CSR5), + ioread32(ioaddr + 0xB8)); + next_tick = 3*HZ; + if (tp->medialock) { + } else if (tp->nwayset && (dev->if_port & 1)) { + next_tick = 1*HZ; + } else if (dev->if_port == 0) { + dev->if_port = 3; + iowrite32(0x33, ioaddr + CSR12); + new_csr6 = 0x01860000; + iowrite32(0x1F868, ioaddr + 0xB8); + } else { + dev->if_port = 0; + iowrite32(0x32, ioaddr + CSR12); + new_csr6 = 0x00420000; + iowrite32(0x1F078, ioaddr + 0xB8); + } + if (tp->csr6 != new_csr6) { + tp->csr6 = new_csr6; + /* Restart Tx */ + tulip_restart_rxtx(tp); + dev->trans_start = jiffies; + if (tulip_debug > 1) + dev_info(&dev->dev, + "Changing PNIC configuration to %s %s-duplex, CSR6 %08x\n", + medianame[dev->if_port], + tp->full_duplex ? "full" : "half", + new_csr6); + } + } + } +too_good_connection: + mod_timer(&tp->timer, RUN_AT(next_tick)); + if(!ioread32(ioaddr + CSR7)) { + if (tulip_debug > 1) + dev_info(&dev->dev, "sw timer wakeup\n"); + disable_irq(dev->irq); + tulip_refill_rx(dev); + enable_irq(dev->irq); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); + } +} diff --git a/drivers/net/ethernet/dec/tulip/pnic2.c b/drivers/net/ethernet/dec/tulip/pnic2.c new file mode 100644 index 00000000000..93358ee4d83 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/pnic2.c @@ -0,0 +1,406 @@ +/* + drivers/net/tulip/pnic2.c + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + Modified to hep support PNIC_II by Kevin B. Hendricks + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + + Please submit bugs to http://bugzilla.kernel.org/ . +*/ + + +/* Understanding the PNIC_II - everything is this file is based + * on the PNIC_II_PDF datasheet which is sorely lacking in detail + * + * As I understand things, here are the registers and bits that + * explain the masks and constants used in this file that are + * either different from the 21142/3 or important for basic operation. + * + * + * CSR 6 (mask = 0xfe3bd1fd of bits not to change) + * ----- + * Bit 24 - SCR + * Bit 23 - PCS + * Bit 22 - TTM (Trasmit Threshold Mode) + * Bit 18 - Port Select + * Bit 13 - Start - 1, Stop - 0 Transmissions + * Bit 11:10 - Loop Back Operation Mode + * Bit 9 - Full Duplex mode (Advertise 10BaseT-FD is CSR14<7> is set) + * Bit 1 - Start - 1, Stop - 0 Receive + * + * + * CSR 14 (mask = 0xfff0ee39 of bits not to change) + * ------ + * Bit 19 - PAUSE-Pause + * Bit 18 - Advertise T4 + * Bit 17 - Advertise 100baseTx-FD + * Bit 16 - Advertise 100baseTx-HD + * Bit 12 - LTE - Link Test Enable + * Bit 7 - ANE - Auto Negotiate Enable + * Bit 6 - HDE - Advertise 10baseT-HD + * Bit 2 - Reset to Power down - kept as 1 for normal operation + * Bit 1 - Loop Back enable for 10baseT MCC + * + * + * CSR 12 + * ------ + * Bit 25 - Partner can do T4 + * Bit 24 - Partner can do 100baseTx-FD + * Bit 23 - Partner can do 100baseTx-HD + * Bit 22 - Partner can do 10baseT-FD + * Bit 21 - Partner can do 10baseT-HD + * Bit 15 - LPN is 1 if all above bits are valid other wise 0 + * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate) + * Bit 3 - Autopolarity state + * Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed + * Bit 1 - LS100B - link state of 100baseT 0 - good, 1 - failed + * + * + * Data Port Selection Info + *------------------------- + * + * CSR14<7> CSR6<18> CSR6<22> CSR6<23> CSR6<24> MODE/PORT + * 1 0 0 (X) 0 (X) 1 NWAY + * 0 0 1 0 (X) 0 10baseT + * 0 1 0 1 1 (X) 100baseT + * + * + */ + + + +#include "tulip.h" +#include <linux/delay.h> + + +void pnic2_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int next_tick = 60*HZ; + + if (tulip_debug > 3) + dev_info(&dev->dev, "PNIC2 negotiation status %08x\n", + ioread32(ioaddr + CSR12)); + + if (next_tick) { + mod_timer(&tp->timer, RUN_AT(next_tick)); + } +} + + +void pnic2_start_nway(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr14; + int csr12; + + /* set up what to advertise during the negotiation */ + + /* load in csr14 and mask off bits not to touch + * comment at top of file explains mask value + */ + csr14 = (ioread32(ioaddr + CSR14) & 0xfff0ee39); + + /* bit 17 - advetise 100baseTx-FD */ + if (tp->sym_advertise & 0x0100) csr14 |= 0x00020000; + + /* bit 16 - advertise 100baseTx-HD */ + if (tp->sym_advertise & 0x0080) csr14 |= 0x00010000; + + /* bit 6 - advertise 10baseT-HD */ + if (tp->sym_advertise & 0x0020) csr14 |= 0x00000040; + + /* Now set bit 12 Link Test Enable, Bit 7 Autonegotiation Enable + * and bit 0 Don't PowerDown 10baseT + */ + csr14 |= 0x00001184; + + if (tulip_debug > 1) + netdev_dbg(dev, "Restarting PNIC2 autonegotiation, csr14=%08x\n", + csr14); + + /* tell pnic2_lnk_change we are doing an nway negotiation */ + dev->if_port = 0; + tp->nway = tp->mediasense = 1; + tp->nwayset = tp->lpar = 0; + + /* now we have to set up csr6 for NWAY state */ + + tp->csr6 = ioread32(ioaddr + CSR6); + if (tulip_debug > 1) + netdev_dbg(dev, "On Entry to Nway, csr6=%08x\n", tp->csr6); + + /* mask off any bits not to touch + * comment at top of file explains mask value + */ + tp->csr6 = tp->csr6 & 0xfe3bd1fd; + + /* don't forget that bit 9 is also used for advertising */ + /* advertise 10baseT-FD for the negotiation (bit 9) */ + if (tp->sym_advertise & 0x0040) tp->csr6 |= 0x00000200; + + /* set bit 24 for nway negotiation mode ... + * see Data Port Selection comment at top of file + * and "Stop" - reset both Transmit (bit 13) and Receive (bit 1) + */ + tp->csr6 |= 0x01000000; + iowrite32(csr14, ioaddr + CSR14); + iowrite32(tp->csr6, ioaddr + CSR6); + udelay(100); + + /* all set up so now force the negotiation to begin */ + + /* read in current values and mask off all but the + * Autonegotiation bits 14:12. Writing a 001 to those bits + * should start the autonegotiation + */ + csr12 = (ioread32(ioaddr + CSR12) & 0xffff8fff); + csr12 |= 0x1000; + iowrite32(csr12, ioaddr + CSR12); +} + + + +void pnic2_lnk_change(struct net_device *dev, int csr5) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr14; + + /* read the staus register to find out what is up */ + int csr12 = ioread32(ioaddr + CSR12); + + if (tulip_debug > 1) + dev_info(&dev->dev, + "PNIC2 link status interrupt %08x, CSR5 %x, %08x\n", + csr12, csr5, ioread32(ioaddr + CSR14)); + + /* If NWay finished and we have a negotiated partner capability. + * check bits 14:12 for bit pattern 101 - all is good + */ + if (tp->nway && !tp->nwayset) { + + /* we did an auto negotiation */ + + if ((csr12 & 0x7000) == 0x5000) { + + /* negotiation ended successfully */ + + /* get the link partners reply and mask out all but + * bits 24-21 which show the partners capabilities + * and match those to what we advertised + * + * then begin to interpret the results of the negotiation. + * Always go in this order : (we are ignoring T4 for now) + * 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD + */ + + int negotiated = ((csr12 >> 16) & 0x01E0) & tp->sym_advertise; + tp->lpar = (csr12 >> 16); + tp->nwayset = 1; + + if (negotiated & 0x0100) dev->if_port = 5; + else if (negotiated & 0x0080) dev->if_port = 3; + else if (negotiated & 0x0040) dev->if_port = 4; + else if (negotiated & 0x0020) dev->if_port = 0; + else { + if (tulip_debug > 1) + dev_info(&dev->dev, + "funny autonegotiate result csr12 %08x advertising %04x\n", + csr12, tp->sym_advertise); + tp->nwayset = 0; + /* so check if 100baseTx link state is okay */ + if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180)) + dev->if_port = 3; + } + + /* now record the duplex that was negotiated */ + tp->full_duplex = 0; + if ((dev->if_port == 4) || (dev->if_port == 5)) + tp->full_duplex = 1; + + if (tulip_debug > 1) { + if (tp->nwayset) + dev_info(&dev->dev, + "Switching to %s based on link negotiation %04x & %04x = %04x\n", + medianame[dev->if_port], + tp->sym_advertise, tp->lpar, + negotiated); + } + + /* remember to turn off bit 7 - autonegotiate + * enable so we can properly end nway mode and + * set duplex (ie. use csr6<9> again) + */ + csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); + iowrite32(csr14,ioaddr + CSR14); + + + /* now set the data port and operating mode + * (see the Data Port Selection comments at + * the top of the file + */ + + /* get current csr6 and mask off bits not to touch */ + /* see comment at top of file */ + + tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); + + /* so if using if_port 3 or 5 then select the 100baseT + * port else select the 10baseT port. + * See the Data Port Selection table at the top + * of the file which was taken from the PNIC_II.PDF + * datasheet + */ + if (dev->if_port & 1) tp->csr6 |= 0x01840000; + else tp->csr6 |= 0x00400000; + + /* now set the full duplex bit appropriately */ + if (tp->full_duplex) tp->csr6 |= 0x00000200; + + iowrite32(1, ioaddr + CSR13); + + if (tulip_debug > 2) + netdev_dbg(dev, "Setting CSR6 %08x/%x CSR12 %08x\n", + tp->csr6, + ioread32(ioaddr + CSR6), + ioread32(ioaddr + CSR12)); + + /* now the following actually writes out the + * new csr6 values + */ + tulip_start_rxtx(tp); + + return; + + } else { + dev_info(&dev->dev, + "Autonegotiation failed, using %s, link beat status %04x\n", + medianame[dev->if_port], csr12); + + /* remember to turn off bit 7 - autonegotiate + * enable so we don't forget + */ + csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); + iowrite32(csr14,ioaddr + CSR14); + + /* what should we do when autonegotiate fails? + * should we try again or default to baseline + * case. I just don't know. + * + * for now default to some baseline case + */ + + dev->if_port = 0; + tp->nway = 0; + tp->nwayset = 1; + + /* set to 10baseTx-HD - see Data Port Selection + * comment given at the top of the file + */ + tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); + tp->csr6 |= 0x00400000; + + tulip_restart_rxtx(tp); + + return; + + } + } + + if ((tp->nwayset && (csr5 & 0x08000000) && + (dev->if_port == 3 || dev->if_port == 5) && + (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) { + + /* Link blew? Maybe restart NWay. */ + + if (tulip_debug > 2) + netdev_dbg(dev, "Ugh! Link blew?\n"); + + del_timer_sync(&tp->timer); + pnic2_start_nway(dev); + tp->timer.expires = RUN_AT(3*HZ); + add_timer(&tp->timer); + + return; + } + + + if (dev->if_port == 3 || dev->if_port == 5) { + + /* we are at 100mb and a potential link change occurred */ + + if (tulip_debug > 1) + dev_info(&dev->dev, "PNIC2 %s link beat %s\n", + medianame[dev->if_port], + (csr12 & 2) ? "failed" : "good"); + + /* check 100 link beat */ + + tp->nway = 0; + tp->nwayset = 1; + + /* if failed then try doing an nway to get in sync */ + if ((csr12 & 2) && ! tp->medialock) { + del_timer_sync(&tp->timer); + pnic2_start_nway(dev); + tp->timer.expires = RUN_AT(3*HZ); + add_timer(&tp->timer); + } + + return; + } + + if (dev->if_port == 0 || dev->if_port == 4) { + + /* we are at 10mb and a potential link change occurred */ + + if (tulip_debug > 1) + dev_info(&dev->dev, "PNIC2 %s link beat %s\n", + medianame[dev->if_port], + (csr12 & 4) ? "failed" : "good"); + + + tp->nway = 0; + tp->nwayset = 1; + + /* if failed, try doing an nway to get in sync */ + if ((csr12 & 4) && ! tp->medialock) { + del_timer_sync(&tp->timer); + pnic2_start_nway(dev); + tp->timer.expires = RUN_AT(3*HZ); + add_timer(&tp->timer); + } + + return; + } + + + if (tulip_debug > 1) + dev_info(&dev->dev, "PNIC2 Link Change Default?\n"); + + /* if all else fails default to trying 10baseT-HD */ + dev->if_port = 0; + + /* make sure autonegotiate enable is off */ + csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); + iowrite32(csr14,ioaddr + CSR14); + + /* set to 10baseTx-HD - see Data Port Selection + * comment given at the top of the file + */ + tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); + tp->csr6 |= 0x00400000; + + tulip_restart_rxtx(tp); +} + diff --git a/drivers/net/ethernet/dec/tulip/timer.c b/drivers/net/ethernet/dec/tulip/timer.c new file mode 100644 index 00000000000..2017faf2d0e --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/timer.c @@ -0,0 +1,179 @@ +/* + drivers/net/tulip/timer.c + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + + Please submit bugs to http://bugzilla.kernel.org/ . +*/ + + +#include "tulip.h" + + +void tulip_media_task(struct work_struct *work) +{ + struct tulip_private *tp = + container_of(work, struct tulip_private, media_work); + struct net_device *dev = tp->dev; + void __iomem *ioaddr = tp->base_addr; + u32 csr12 = ioread32(ioaddr + CSR12); + int next_tick = 2*HZ; + unsigned long flags; + + if (tulip_debug > 2) { + netdev_dbg(dev, "Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n", + medianame[dev->if_port], + ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6), + csr12, ioread32(ioaddr + CSR13), + ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15)); + } + switch (tp->chip_id) { + case DC21140: + case DC21142: + case MX98713: + case COMPEX9881: + case DM910X: + default: { + struct medialeaf *mleaf; + unsigned char *p; + if (tp->mtable == NULL) { /* No EEPROM info, use generic code. */ + /* Not much that can be done. + Assume this a generic MII or SYM transceiver. */ + next_tick = 60*HZ; + if (tulip_debug > 2) + netdev_dbg(dev, "network media monitor CSR6 %08x CSR12 0x%02x\n", + ioread32(ioaddr + CSR6), + csr12 & 0xff); + break; + } + mleaf = &tp->mtable->mleaf[tp->cur_index]; + p = mleaf->leafdata; + switch (mleaf->type) { + case 0: case 4: { + /* Type 0 serial or 4 SYM transceiver. Check the link beat bit. */ + int offset = mleaf->type == 4 ? 5 : 2; + s8 bitnum = p[offset]; + if (p[offset+1] & 0x80) { + if (tulip_debug > 1) + netdev_dbg(dev, "Transceiver monitor tick CSR12=%#02x, no media sense\n", + csr12); + if (mleaf->type == 4) { + if (mleaf->media == 3 && (csr12 & 0x02)) + goto select_next_media; + } + break; + } + if (tulip_debug > 2) + netdev_dbg(dev, "Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n", + csr12, (bitnum >> 1) & 7, + (csr12 & (1 << ((bitnum >> 1) & 7))) != 0, + (bitnum >= 0)); + /* Check that the specified bit has the proper value. */ + if ((bitnum < 0) != + ((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) { + if (tulip_debug > 2) + netdev_dbg(dev, "Link beat detected for %s\n", + medianame[mleaf->media & MEDIA_MASK]); + if ((p[2] & 0x61) == 0x01) /* Bogus Znyx board. */ + goto actually_mii; + netif_carrier_on(dev); + break; + } + netif_carrier_off(dev); + if (tp->medialock) + break; + select_next_media: + if (--tp->cur_index < 0) { + /* We start again, but should instead look for default. */ + tp->cur_index = tp->mtable->leafcount - 1; + } + dev->if_port = tp->mtable->mleaf[tp->cur_index].media; + if (tulip_media_cap[dev->if_port] & MediaIsFD) + goto select_next_media; /* Skip FD entries. */ + if (tulip_debug > 1) + netdev_dbg(dev, "No link beat on media %s, trying transceiver type %s\n", + medianame[mleaf->media & MEDIA_MASK], + medianame[tp->mtable->mleaf[tp->cur_index].media]); + tulip_select_media(dev, 0); + /* Restart the transmit process. */ + tulip_restart_rxtx(tp); + next_tick = (24*HZ)/10; + break; + } + case 1: case 3: /* 21140, 21142 MII */ + actually_mii: + if (tulip_check_duplex(dev) < 0) { + netif_carrier_off(dev); + next_tick = 3*HZ; + } else { + netif_carrier_on(dev); + next_tick = 60*HZ; + } + break; + case 2: /* 21142 serial block has no link beat. */ + default: + break; + } + } + break; + } + + + spin_lock_irqsave(&tp->lock, flags); + if (tp->timeout_recovery) { + tulip_tx_timeout_complete(tp, ioaddr); + tp->timeout_recovery = 0; + } + spin_unlock_irqrestore(&tp->lock, flags); + + /* mod_timer synchronizes us with potential add_timer calls + * from interrupts. + */ + mod_timer(&tp->timer, RUN_AT(next_tick)); +} + + +void mxic_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int next_tick = 60*HZ; + + if (tulip_debug > 3) { + dev_info(&dev->dev, "MXIC negotiation status %08x\n", + ioread32(ioaddr + CSR12)); + } + if (next_tick) { + mod_timer(&tp->timer, RUN_AT(next_tick)); + } +} + + +void comet_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + int next_tick = 60*HZ; + + if (tulip_debug > 1) + netdev_dbg(dev, "Comet link status %04x partner capability %04x\n", + tulip_mdio_read(dev, tp->phys[0], 1), + tulip_mdio_read(dev, tp->phys[0], 5)); + /* mod_timer synchronizes us with potential add_timer calls + * from interrupts. + */ + if (tulip_check_duplex(dev) < 0) + { netif_carrier_off(dev); } + else + { netif_carrier_on(dev); } + mod_timer(&tp->timer, RUN_AT(next_tick)); +} + diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h new file mode 100644 index 00000000000..9db528967da --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/tulip.h @@ -0,0 +1,573 @@ +/* + drivers/net/tulip/tulip.h + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + + Please submit bugs to http://bugzilla.kernel.org/ . +*/ + +#ifndef __NET_TULIP_H__ +#define __NET_TULIP_H__ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/unaligned.h> + + + +/* undefine, or define to various debugging levels (>4 == obscene levels) */ +#define TULIP_DEBUG 1 + +#ifdef CONFIG_TULIP_MMIO +#define TULIP_BAR 1 /* CBMA */ +#else +#define TULIP_BAR 0 /* CBIO */ +#endif + + + +struct tulip_chip_table { + char *chip_name; + int io_size; + int valid_intrs; /* CSR7 interrupt enable settings */ + int flags; + void (*media_timer) (unsigned long); + work_func_t media_task; +}; + + +enum tbl_flag { + HAS_MII = 0x00001, + HAS_MEDIA_TABLE = 0x00002, + CSR12_IN_SROM = 0x00004, + ALWAYS_CHECK_MII = 0x00008, + HAS_ACPI = 0x00010, + MC_HASH_ONLY = 0x00020, /* Hash-only multicast filter. */ + HAS_PNICNWAY = 0x00080, + HAS_NWAY = 0x00040, /* Uses internal NWay xcvr. */ + HAS_INTR_MITIGATION = 0x00100, + IS_ASIX = 0x00200, + HAS_8023X = 0x00400, + COMET_MAC_ADDR = 0x00800, + HAS_PCI_MWI = 0x01000, + HAS_PHY_IRQ = 0x02000, + HAS_SWAPPED_SEEPROM = 0x04000, + NEEDS_FAKE_MEDIA_TABLE = 0x08000, + COMET_PM = 0x10000, +}; + + +/* chip types. careful! order is VERY IMPORTANT here, as these + * are used throughout the driver as indices into arrays */ +/* Note 21142 == 21143. */ +enum chips { + DC21040 = 0, + DC21041 = 1, + DC21140 = 2, + DC21142 = 3, DC21143 = 3, + LC82C168, + MX98713, + MX98715, + MX98725, + AX88140, + PNIC2, + COMET, + COMPEX9881, + I21145, + DM910X, + CONEXANT, +}; + + +enum MediaIs { + MediaIsFD = 1, + MediaAlwaysFD = 2, + MediaIsMII = 4, + MediaIsFx = 8, + MediaIs100 = 16 +}; + + +/* Offsets to the Command and Status Registers, "CSRs". All accesses + must be longword instructions and quadword aligned. */ +enum tulip_offsets { + CSR0 = 0, + CSR1 = 0x08, + CSR2 = 0x10, + CSR3 = 0x18, + CSR4 = 0x20, + CSR5 = 0x28, + CSR6 = 0x30, + CSR7 = 0x38, + CSR8 = 0x40, + CSR9 = 0x48, + CSR10 = 0x50, + CSR11 = 0x58, + CSR12 = 0x60, + CSR13 = 0x68, + CSR14 = 0x70, + CSR15 = 0x78, + CSR18 = 0x88, + CSR19 = 0x8c, + CSR20 = 0x90, + CSR27 = 0xAC, + CSR28 = 0xB0, +}; + +/* register offset and bits for CFDD PCI config reg */ +enum pci_cfg_driver_reg { + CFDD = 0x40, + CFDD_Sleep = (1 << 31), + CFDD_Snooze = (1 << 30), +}; + +#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber) + +/* The bits in the CSR5 status registers, mostly interrupt sources. */ +enum status_bits { + TimerInt = 0x800, + SystemError = 0x2000, + TPLnkFail = 0x1000, + TPLnkPass = 0x10, + NormalIntr = 0x10000, + AbnormalIntr = 0x8000, + RxJabber = 0x200, + RxDied = 0x100, + RxNoBuf = 0x80, + RxIntr = 0x40, + TxFIFOUnderflow = 0x20, + RxErrIntr = 0x10, + TxJabber = 0x08, + TxNoBuf = 0x04, + TxDied = 0x02, + TxIntr = 0x01, +}; + +/* bit mask for CSR5 TX/RX process state */ +#define CSR5_TS 0x00700000 +#define CSR5_RS 0x000e0000 + +enum tulip_mode_bits { + TxThreshold = (1 << 22), + FullDuplex = (1 << 9), + TxOn = 0x2000, + AcceptBroadcast = 0x0100, + AcceptAllMulticast = 0x0080, + AcceptAllPhys = 0x0040, + AcceptRunt = 0x0008, + RxOn = 0x0002, + RxTx = (TxOn | RxOn), +}; + + +enum tulip_busconfig_bits { + MWI = (1 << 24), + MRL = (1 << 23), + MRM = (1 << 21), + CALShift = 14, + BurstLenShift = 8, +}; + + +/* The Tulip Rx and Tx buffer descriptors. */ +struct tulip_rx_desc { + __le32 status; + __le32 length; + __le32 buffer1; + __le32 buffer2; +}; + + +struct tulip_tx_desc { + __le32 status; + __le32 length; + __le32 buffer1; + __le32 buffer2; /* We use only buffer 1. */ +}; + + +enum desc_status_bits { + DescOwned = 0x80000000, + DescWholePkt = 0x60000000, + DescEndPkt = 0x40000000, + DescStartPkt = 0x20000000, + DescEndRing = 0x02000000, + DescUseLink = 0x01000000, + + /* + * Error summary flag is logical or of 'CRC Error', 'Collision Seen', + * 'Frame Too Long', 'Runt' and 'Descriptor Error' flags generated + * within tulip chip. + */ + RxDescErrorSummary = 0x8000, + RxDescCRCError = 0x0002, + RxDescCollisionSeen = 0x0040, + + /* + * 'Frame Too Long' flag is set if packet length including CRC exceeds + * 1518. However, a full sized VLAN tagged frame is 1522 bytes + * including CRC. + * + * The tulip chip does not block oversized frames, and if this flag is + * set on a receive descriptor it does not indicate the frame has been + * truncated. The receive descriptor also includes the actual length. + * Therefore we can safety ignore this flag and check the length + * ourselves. + */ + RxDescFrameTooLong = 0x0080, + RxDescRunt = 0x0800, + RxDescDescErr = 0x4000, + RxWholePkt = 0x00000300, + /* + * Top three bits of 14 bit frame length (status bits 27-29) should + * never be set as that would make frame over 2047 bytes. The Receive + * Watchdog flag (bit 4) may indicate the length is over 2048 and the + * length field is invalid. + */ + RxLengthOver2047 = 0x38000010 +}; + + +enum t21143_csr6_bits { + csr6_sc = (1<<31), + csr6_ra = (1<<30), + csr6_ign_dest_msb = (1<<26), + csr6_mbo = (1<<25), + csr6_scr = (1<<24), /* scramble mode flag: can't be set */ + csr6_pcs = (1<<23), /* Enables PCS functions (symbol mode requires csr6_ps be set) default is set */ + csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */ + csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */ + csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */ + csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */ + csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */ + csr6_trh = (1<<15), /* Transmit Threshold high bit */ + csr6_trl = (1<<14), /* Transmit Threshold low bit */ + + /*************************************************************** + * This table shows transmit threshold values based on media * + * and these two registers (from PNIC1 & 2 docs) Note: this is * + * all meaningless if sf is set. * + ***************************************************************/ + + /*********************************** + * (trh,trl) * 100BaseTX * 10BaseT * + *********************************** + * (0,0) * 128 * 72 * + * (0,1) * 256 * 96 * + * (1,0) * 512 * 128 * + * (1,1) * 1024 * 160 * + ***********************************/ + + csr6_fc = (1<<12), /* Forces a collision in next transmission (for testing in loopback mode) */ + csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */ + csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */ + /* set both and you get (PHY) loopback */ + csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */ + csr6_pm = (1<<7), /* Pass All Multicast */ + csr6_pr = (1<<6), /* Promiscuous mode */ + csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */ + csr6_if = (1<<4), /* Inverse Filtering, rejects only addresses in address table: can't be set */ + csr6_pb = (1<<3), /* Pass Bad Frames, (1) causes even bad frames to be passed on */ + csr6_ho = (1<<2), /* Hash-only filtering mode: can't be set */ + csr6_hp = (1<<0), /* Hash/Perfect Receive Filtering Mode: can't be set */ + + csr6_mask_capture = (csr6_sc | csr6_ca), + csr6_mask_defstate = (csr6_mask_capture | csr6_mbo), + csr6_mask_hdcap = (csr6_mask_defstate | csr6_hbd | csr6_ps), + csr6_mask_hdcaptt = (csr6_mask_hdcap | csr6_trh | csr6_trl), + csr6_mask_fullcap = (csr6_mask_hdcaptt | csr6_fd), + csr6_mask_fullpromisc = (csr6_pr | csr6_pm), + csr6_mask_filters = (csr6_hp | csr6_ho | csr6_if), + csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd), +}; + +enum tulip_comet_csr13_bits { +/* The LINKOFFE and LINKONE work in conjunction with LSCE, i.e. they + * determine which link status transition wakes up if LSCE is + * enabled */ + comet_csr13_linkoffe = (1 << 17), + comet_csr13_linkone = (1 << 16), + comet_csr13_wfre = (1 << 10), + comet_csr13_mpre = (1 << 9), + comet_csr13_lsce = (1 << 8), + comet_csr13_wfr = (1 << 2), + comet_csr13_mpr = (1 << 1), + comet_csr13_lsc = (1 << 0), +}; + +enum tulip_comet_csr18_bits { + comet_csr18_pmes_sticky = (1 << 24), + comet_csr18_pm_mode = (1 << 19), + comet_csr18_apm_mode = (1 << 18), + comet_csr18_d3a = (1 << 7) +}; + +enum tulip_comet_csr20_bits { + comet_csr20_pmes = (1 << 15), +}; + +/* Keep the ring sizes a power of two for efficiency. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + There are no ill effects from too-large receive rings. */ + +#define TX_RING_SIZE 32 +#define RX_RING_SIZE 128 +#define MEDIA_MASK 31 + +/* The receiver on the DC21143 rev 65 can fail to close the last + * receive descriptor in certain circumstances (see errata) when + * using MWI. This can only occur if the receive buffer ends on + * a cache line boundary, so the "+ 4" below ensures it doesn't. + */ +#define PKT_BUF_SZ (1536 + 4) /* Size of each temporary Rx buffer. */ + +#define TULIP_MIN_CACHE_LINE 8 /* in units of 32-bit words */ + +#if defined(__sparc__) || defined(__hppa__) +/* The UltraSparc PCI controllers will disconnect at every 64-byte + * crossing anyways so it makes no sense to tell Tulip to burst + * any more than that. + */ +#define TULIP_MAX_CACHE_LINE 16 /* in units of 32-bit words */ +#else +#define TULIP_MAX_CACHE_LINE 32 /* in units of 32-bit words */ +#endif + + +/* Ring-wrap flag in length field, use for last ring entry. + 0x01000000 means chain on buffer2 address, + 0x02000000 means use the ring start address in CSR2/3. + Note: Some work-alike chips do not function correctly in chained mode. + The ASIX chip works only in chained mode. + Thus we indicates ring mode, but always write the 'next' field for + chained mode as well. +*/ +#define DESC_RING_WRAP 0x02000000 + + +#define EEPROM_SIZE 512 /* 2 << EEPROM_ADDRLEN */ + + +#define RUN_AT(x) (jiffies + (x)) + +#define get_u16(ptr) get_unaligned_le16((ptr)) + +struct medialeaf { + u8 type; + u8 media; + unsigned char *leafdata; +}; + + +struct mediatable { + u16 defaultmedia; + u8 leafcount; + u8 csr12dir; /* General purpose pin directions. */ + unsigned has_mii:1; + unsigned has_nonmii:1; + unsigned has_reset:6; + u32 csr15dir; + u32 csr15val; /* 21143 NWay setting. */ + struct medialeaf mleaf[0]; +}; + + +struct mediainfo { + struct mediainfo *next; + int info_type; + int index; + unsigned char *info; +}; + +struct ring_info { + struct sk_buff *skb; + dma_addr_t mapping; +}; + + +struct tulip_private { + const char *product_name; + struct net_device *next_module; + struct tulip_rx_desc *rx_ring; + struct tulip_tx_desc *tx_ring; + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + /* The saved address of a sent-in-place packet/buffer, for skfree(). */ + struct ring_info tx_buffers[TX_RING_SIZE]; + /* The addresses of receive-in-place skbuffs. */ + struct ring_info rx_buffers[RX_RING_SIZE]; + u16 setup_frame[96]; /* Pseudo-Tx frame to init address table. */ + int chip_id; + int revision; + int flags; + struct napi_struct napi; + struct timer_list timer; /* Media selection timer. */ + struct timer_list oom_timer; /* Out of memory timer. */ + u32 mc_filter[2]; + spinlock_t lock; + spinlock_t mii_lock; + unsigned int cur_rx, cur_tx; /* The next free ring entry */ + unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ + +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + int mit_on; +#endif + unsigned int full_duplex:1; /* Full-duplex operation requested. */ + unsigned int full_duplex_lock:1; + unsigned int fake_addr:1; /* Multiport board faked address. */ + unsigned int default_port:4; /* Last dev->if_port value. */ + unsigned int media2:4; /* Secondary monitored media port. */ + unsigned int medialock:1; /* Don't sense media type. */ + unsigned int mediasense:1; /* Media sensing in progress. */ + unsigned int nway:1, nwayset:1; /* 21143 internal NWay. */ + unsigned int timeout_recovery:1; + unsigned int csr0; /* CSR0 setting. */ + unsigned int csr6; /* Current CSR6 control settings. */ + unsigned char eeprom[EEPROM_SIZE]; /* Serial EEPROM contents. */ + void (*link_change) (struct net_device * dev, int csr5); + struct ethtool_wolinfo wolinfo; /* WOL settings */ + u16 sym_advertise, mii_advertise; /* NWay capabilities advertised. */ + u16 lpar; /* 21143 Link partner ability. */ + u16 advertising[4]; + signed char phys[4], mii_cnt; /* MII device addresses. */ + struct mediatable *mtable; + int cur_index; /* Current media index. */ + int saved_if_port; + struct pci_dev *pdev; + int ttimer; + int susp_rx; + unsigned long nir; + void __iomem *base_addr; + int csr12_shadow; + int pad0; /* Used for 8-byte alignment */ + struct work_struct media_work; + struct net_device *dev; +}; + + +struct eeprom_fixup { + char *name; + unsigned char addr0; + unsigned char addr1; + unsigned char addr2; + u16 newtable[32]; /* Max length below. */ +}; + + +/* 21142.c */ +extern u16 t21142_csr14[]; +void t21142_media_task(struct work_struct *work); +void t21142_start_nway(struct net_device *dev); +void t21142_lnk_change(struct net_device *dev, int csr5); + + +/* PNIC2.c */ +void pnic2_lnk_change(struct net_device *dev, int csr5); +void pnic2_timer(unsigned long data); +void pnic2_start_nway(struct net_device *dev); +void pnic2_lnk_change(struct net_device *dev, int csr5); + +/* eeprom.c */ +void tulip_parse_eeprom(struct net_device *dev); +int tulip_read_eeprom(struct net_device *dev, int location, int addr_len); + +/* interrupt.c */ +extern unsigned int tulip_max_interrupt_work; +extern int tulip_rx_copybreak; +irqreturn_t tulip_interrupt(int irq, void *dev_instance); +int tulip_refill_rx(struct net_device *dev); +#ifdef CONFIG_TULIP_NAPI +int tulip_poll(struct napi_struct *napi, int budget); +#endif + + +/* media.c */ +int tulip_mdio_read(struct net_device *dev, int phy_id, int location); +void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int value); +void tulip_select_media(struct net_device *dev, int startup); +int tulip_check_duplex(struct net_device *dev); +void tulip_find_mii (struct net_device *dev, int board_idx); + +/* pnic.c */ +void pnic_do_nway(struct net_device *dev); +void pnic_lnk_change(struct net_device *dev, int csr5); +void pnic_timer(unsigned long data); + +/* timer.c */ +void tulip_media_task(struct work_struct *work); +void mxic_timer(unsigned long data); +void comet_timer(unsigned long data); + +/* tulip_core.c */ +extern int tulip_debug; +extern const char * const medianame[]; +extern const char tulip_media_cap[]; +extern struct tulip_chip_table tulip_tbl[]; +void oom_timer(unsigned long data); +extern u8 t21040_csr13[]; + +static inline void tulip_start_rxtx(struct tulip_private *tp) +{ + void __iomem *ioaddr = tp->base_addr; + iowrite32(tp->csr6 | RxTx, ioaddr + CSR6); + barrier(); + (void) ioread32(ioaddr + CSR6); /* mmio sync */ +} + +static inline void tulip_stop_rxtx(struct tulip_private *tp) +{ + void __iomem *ioaddr = tp->base_addr; + u32 csr6 = ioread32(ioaddr + CSR6); + + if (csr6 & RxTx) { + unsigned i=1300/10; + iowrite32(csr6 & ~RxTx, ioaddr + CSR6); + barrier(); + /* wait until in-flight frame completes. + * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin) + * Typically expect this loop to end in < 50 us on 100BT. + */ + while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS))) + udelay(10); + + if (!i) + netdev_dbg(tp->dev, "tulip_stop_rxtx() failed (CSR5 0x%x CSR6 0x%x)\n", + ioread32(ioaddr + CSR5), + ioread32(ioaddr + CSR6)); + } +} + +static inline void tulip_restart_rxtx(struct tulip_private *tp) +{ + tulip_stop_rxtx(tp); + udelay(5); + tulip_start_rxtx(tp); +} + +static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr) +{ + /* Stop and restart the chip's Tx processes. */ + tulip_restart_rxtx(tp); + /* Trigger an immediate transmit demand. */ + iowrite32(0, ioaddr + CSR1); + + tp->dev->stats.tx_errors++; +} + +#endif /* __NET_TULIP_H__ */ diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c new file mode 100644 index 00000000000..1246998a677 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/tulip_core.c @@ -0,0 +1,2011 @@ +/* tulip_core.c: A DEC 21x4x-family ethernet driver for Linux. + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + + Please submit bugs to http://bugzilla.kernel.org/ . +*/ + +#define pr_fmt(fmt) "tulip: " fmt + +#define DRV_NAME "tulip" +#ifdef CONFIG_TULIP_NAPI +#define DRV_VERSION "1.1.15-NAPI" /* Keep at least for test */ +#else +#define DRV_VERSION "1.1.15" +#endif +#define DRV_RELDATE "Feb 27, 2007" + + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include "tulip.h" +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/mii.h> +#include <linux/crc32.h> +#include <asm/unaligned.h> +#include <asm/uaccess.h> + +#ifdef CONFIG_SPARC +#include <asm/prom.h> +#endif + +static char version[] __devinitdata = + "Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n"; + +/* A few user-configurable values. */ + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static unsigned int max_interrupt_work = 25; + +#define MAX_UNITS 8 +/* Used to pass the full-duplex flag, etc. */ +static int full_duplex[MAX_UNITS]; +static int options[MAX_UNITS]; +static int mtu[MAX_UNITS]; /* Jumbo MTU for interfaces. */ + +/* The possible media types that can be set in options[] are: */ +const char * const medianame[32] = { + "10baseT", "10base2", "AUI", "100baseTx", + "10baseT-FDX", "100baseTx-FDX", "100baseT4", "100baseFx", + "100baseFx-FDX", "MII 10baseT", "MII 10baseT-FDX", "MII", + "10baseT(forced)", "MII 100baseTx", "MII 100baseTx-FDX", "MII 100baseT4", + "MII 100baseFx-HDX", "MII 100baseFx-FDX", "Home-PNA 1Mbps", "Invalid-19", + "","","","", "","","","", "","","","Transceiver reset", +}; + +/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */ +#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \ + defined(CONFIG_SPARC) || defined(__ia64__) || \ + defined(__sh__) || defined(__mips__) +static int rx_copybreak = 1518; +#else +static int rx_copybreak = 100; +#endif + +/* + Set the bus performance register. + Typical: Set 16 longword cache alignment, no burst limit. + Cache alignment bits 15:14 Burst length 13:8 + 0000 No alignment 0x00000000 unlimited 0800 8 longwords + 4000 8 longwords 0100 1 longword 1000 16 longwords + 8000 16 longwords 0200 2 longwords 2000 32 longwords + C000 32 longwords 0400 4 longwords + Warning: many older 486 systems are broken and require setting 0x00A04800 + 8 longword cache alignment, 8 longword burst. + ToDo: Non-Intel setting could be better. +*/ + +#if defined(__alpha__) || defined(__ia64__) +static int csr0 = 0x01A00000 | 0xE000; +#elif defined(__i386__) || defined(__powerpc__) || defined(__x86_64__) +static int csr0 = 0x01A00000 | 0x8000; +#elif defined(CONFIG_SPARC) || defined(__hppa__) +/* The UltraSparc PCI controllers will disconnect at every 64-byte + * crossing anyways so it makes no sense to tell Tulip to burst + * any more than that. + */ +static int csr0 = 0x01A00000 | 0x9000; +#elif defined(__arm__) || defined(__sh__) +static int csr0 = 0x01A00000 | 0x4800; +#elif defined(__mips__) +static int csr0 = 0x00200000 | 0x4000; +#else +#warning Processor architecture undefined! +static int csr0 = 0x00A00000 | 0x4800; +#endif + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (4*HZ) + + +MODULE_AUTHOR("The Linux Kernel Team"); +MODULE_DESCRIPTION("Digital 21*4* Tulip ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +module_param(tulip_debug, int, 0); +module_param(max_interrupt_work, int, 0); +module_param(rx_copybreak, int, 0); +module_param(csr0, int, 0); +module_param_array(options, int, NULL, 0); +module_param_array(full_duplex, int, NULL, 0); + +#ifdef TULIP_DEBUG +int tulip_debug = TULIP_DEBUG; +#else +int tulip_debug = 1; +#endif + +static void tulip_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + + if (netif_running(dev)) + schedule_work(&tp->media_work); +} + +/* + * This table use during operation for capabilities and media timer. + * + * It is indexed via the values in 'enum chips' + */ + +struct tulip_chip_table tulip_tbl[] = { + { }, /* placeholder for array, slot unused currently */ + { }, /* placeholder for array, slot unused currently */ + + /* DC21140 */ + { "Digital DS21140 Tulip", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_PCI_MWI, tulip_timer, + tulip_media_task }, + + /* DC21142, DC21143 */ + { "Digital DS21142/43 Tulip", 128, 0x0801fbff, + HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY + | HAS_INTR_MITIGATION | HAS_PCI_MWI, tulip_timer, t21142_media_task }, + + /* LC82C168 */ + { "Lite-On 82c168 PNIC", 256, 0x0001fbef, + HAS_MII | HAS_PNICNWAY, pnic_timer, }, + + /* MX98713 */ + { "Macronix 98713 PMAC", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, }, + + /* MX98715 */ + { "Macronix 98715 PMAC", 256, 0x0001ebef, + HAS_MEDIA_TABLE, mxic_timer, }, + + /* MX98725 */ + { "Macronix 98725 PMAC", 256, 0x0001ebef, + HAS_MEDIA_TABLE, mxic_timer, }, + + /* AX88140 */ + { "ASIX AX88140", 128, 0x0001fbff, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | MC_HASH_ONLY + | IS_ASIX, tulip_timer, tulip_media_task }, + + /* PNIC2 */ + { "Lite-On PNIC-II", 256, 0x0801fbff, + HAS_MII | HAS_NWAY | HAS_8023X | HAS_PCI_MWI, pnic2_timer, }, + + /* COMET */ + { "ADMtek Comet", 256, 0x0001abef, + HAS_MII | MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer, }, + + /* COMPEX9881 */ + { "Compex 9881 PMAC", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, }, + + /* I21145 */ + { "Intel DS21145 Tulip", 128, 0x0801fbff, + HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI + | HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task }, + + /* DM910X */ +#ifdef CONFIG_TULIP_DM910X + { "Davicom DM9102/DM9102A", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, + tulip_timer, tulip_media_task }, +#else + { NULL }, +#endif + + /* RS7112 */ + { "Conexant LANfinity", 256, 0x0001ebef, + HAS_MII | HAS_ACPI, tulip_timer, tulip_media_task }, + +}; + + +static DEFINE_PCI_DEVICE_TABLE(tulip_pci_tbl) = { + { 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 }, + { 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 }, + { 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 }, + { 0x10d9, 0x0512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98713 }, + { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, +/* { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98725 },*/ + { 0x125B, 0x1400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AX88140 }, + { 0x11AD, 0xc115, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PNIC2 }, + { 0x1317, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1317, 0x0985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1317, 0x1985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1317, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x13D1, 0xAB02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x13D1, 0xAB03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x13D1, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x104A, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x104A, 0x2774, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 }, + { 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 }, +#ifdef CONFIG_TULIP_DM910X + { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, + { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, +#endif + { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, + { 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1186, 0x1541, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1186, 0x1561, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1186, 0x1591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x14f1, 0x1803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CONEXANT }, + { 0x1626, 0x8410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ + { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ + { 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */ + { 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { } /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, tulip_pci_tbl); + + +/* A full-duplex map for media types. */ +const char tulip_media_cap[32] = +{0,0,0,16, 3,19,16,24, 27,4,7,5, 0,20,23,20, 28,31,0,0, }; + +static void tulip_tx_timeout(struct net_device *dev); +static void tulip_init_ring(struct net_device *dev); +static void tulip_free_ring(struct net_device *dev); +static netdev_tx_t tulip_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static int tulip_open(struct net_device *dev); +static int tulip_close(struct net_device *dev); +static void tulip_up(struct net_device *dev); +static void tulip_down(struct net_device *dev); +static struct net_device_stats *tulip_get_stats(struct net_device *dev); +static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static void set_rx_mode(struct net_device *dev); +static void tulip_set_wolopts(struct pci_dev *pdev, u32 wolopts); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void poll_tulip(struct net_device *dev); +#endif + +static void tulip_set_power_state (struct tulip_private *tp, + int sleep, int snooze) +{ + if (tp->flags & HAS_ACPI) { + u32 tmp, newtmp; + pci_read_config_dword (tp->pdev, CFDD, &tmp); + newtmp = tmp & ~(CFDD_Sleep | CFDD_Snooze); + if (sleep) + newtmp |= CFDD_Sleep; + else if (snooze) + newtmp |= CFDD_Snooze; + if (tmp != newtmp) + pci_write_config_dword (tp->pdev, CFDD, newtmp); + } + +} + + +static void tulip_up(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int next_tick = 3*HZ; + u32 reg; + int i; + +#ifdef CONFIG_TULIP_NAPI + napi_enable(&tp->napi); +#endif + + /* Wake the chip from sleep/snooze mode. */ + tulip_set_power_state (tp, 0, 0); + + /* Disable all WOL events */ + pci_enable_wake(tp->pdev, PCI_D3hot, 0); + pci_enable_wake(tp->pdev, PCI_D3cold, 0); + tulip_set_wolopts(tp->pdev, 0); + + /* On some chip revs we must set the MII/SYM port before the reset!? */ + if (tp->mii_cnt || (tp->mtable && tp->mtable->has_mii)) + iowrite32(0x00040000, ioaddr + CSR6); + + /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */ + iowrite32(0x00000001, ioaddr + CSR0); + pci_read_config_dword(tp->pdev, PCI_COMMAND, ®); /* flush write */ + udelay(100); + + /* Deassert reset. + Wait the specified 50 PCI cycles after a reset by initializing + Tx and Rx queues and the address filter list. */ + iowrite32(tp->csr0, ioaddr + CSR0); + pci_read_config_dword(tp->pdev, PCI_COMMAND, ®); /* flush write */ + udelay(100); + + if (tulip_debug > 1) + netdev_dbg(dev, "tulip_up(), irq==%d\n", dev->irq); + + iowrite32(tp->rx_ring_dma, ioaddr + CSR3); + iowrite32(tp->tx_ring_dma, ioaddr + CSR4); + tp->cur_rx = tp->cur_tx = 0; + tp->dirty_rx = tp->dirty_tx = 0; + + if (tp->flags & MC_HASH_ONLY) { + u32 addr_low = get_unaligned_le32(dev->dev_addr); + u32 addr_high = get_unaligned_le16(dev->dev_addr + 4); + if (tp->chip_id == AX88140) { + iowrite32(0, ioaddr + CSR13); + iowrite32(addr_low, ioaddr + CSR14); + iowrite32(1, ioaddr + CSR13); + iowrite32(addr_high, ioaddr + CSR14); + } else if (tp->flags & COMET_MAC_ADDR) { + iowrite32(addr_low, ioaddr + 0xA4); + iowrite32(addr_high, ioaddr + 0xA8); + iowrite32(0, ioaddr + CSR27); + iowrite32(0, ioaddr + CSR28); + } + } else { + /* This is set_rx_mode(), but without starting the transmitter. */ + u16 *eaddrs = (u16 *)dev->dev_addr; + u16 *setup_frm = &tp->setup_frame[15*6]; + dma_addr_t mapping; + + /* 21140 bug: you must add the broadcast address. */ + memset(tp->setup_frame, 0xff, sizeof(tp->setup_frame)); + /* Fill the final entry of the table with our physical address. */ + *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; + *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; + *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; + + mapping = pci_map_single(tp->pdev, tp->setup_frame, + sizeof(tp->setup_frame), + PCI_DMA_TODEVICE); + tp->tx_buffers[tp->cur_tx].skb = NULL; + tp->tx_buffers[tp->cur_tx].mapping = mapping; + + /* Put the setup frame on the Tx list. */ + tp->tx_ring[tp->cur_tx].length = cpu_to_le32(0x08000000 | 192); + tp->tx_ring[tp->cur_tx].buffer1 = cpu_to_le32(mapping); + tp->tx_ring[tp->cur_tx].status = cpu_to_le32(DescOwned); + + tp->cur_tx++; + } + + tp->saved_if_port = dev->if_port; + if (dev->if_port == 0) + dev->if_port = tp->default_port; + + /* Allow selecting a default media. */ + i = 0; + if (tp->mtable == NULL) + goto media_picked; + if (dev->if_port) { + int looking_for = tulip_media_cap[dev->if_port] & MediaIsMII ? 11 : + (dev->if_port == 12 ? 0 : dev->if_port); + for (i = 0; i < tp->mtable->leafcount; i++) + if (tp->mtable->mleaf[i].media == looking_for) { + dev_info(&dev->dev, + "Using user-specified media %s\n", + medianame[dev->if_port]); + goto media_picked; + } + } + if ((tp->mtable->defaultmedia & 0x0800) == 0) { + int looking_for = tp->mtable->defaultmedia & MEDIA_MASK; + for (i = 0; i < tp->mtable->leafcount; i++) + if (tp->mtable->mleaf[i].media == looking_for) { + dev_info(&dev->dev, + "Using EEPROM-set media %s\n", + medianame[looking_for]); + goto media_picked; + } + } + /* Start sensing first non-full-duplex media. */ + for (i = tp->mtable->leafcount - 1; + (tulip_media_cap[tp->mtable->mleaf[i].media] & MediaAlwaysFD) && i > 0; i--) + ; +media_picked: + + tp->csr6 = 0; + tp->cur_index = i; + tp->nwayset = 0; + + if (dev->if_port) { + if (tp->chip_id == DC21143 && + (tulip_media_cap[dev->if_port] & MediaIsMII)) { + /* We must reset the media CSRs when we force-select MII mode. */ + iowrite32(0x0000, ioaddr + CSR13); + iowrite32(0x0000, ioaddr + CSR14); + iowrite32(0x0008, ioaddr + CSR15); + } + tulip_select_media(dev, 1); + } else if (tp->chip_id == DC21142) { + if (tp->mii_cnt) { + tulip_select_media(dev, 1); + if (tulip_debug > 1) + dev_info(&dev->dev, + "Using MII transceiver %d, status %04x\n", + tp->phys[0], + tulip_mdio_read(dev, tp->phys[0], 1)); + iowrite32(csr6_mask_defstate, ioaddr + CSR6); + tp->csr6 = csr6_mask_hdcap; + dev->if_port = 11; + iowrite32(0x0000, ioaddr + CSR13); + iowrite32(0x0000, ioaddr + CSR14); + } else + t21142_start_nway(dev); + } else if (tp->chip_id == PNIC2) { + /* for initial startup advertise 10/100 Full and Half */ + tp->sym_advertise = 0x01E0; + /* enable autonegotiate end interrupt */ + iowrite32(ioread32(ioaddr+CSR5)| 0x00008010, ioaddr + CSR5); + iowrite32(ioread32(ioaddr+CSR7)| 0x00008010, ioaddr + CSR7); + pnic2_start_nway(dev); + } else if (tp->chip_id == LC82C168 && ! tp->medialock) { + if (tp->mii_cnt) { + dev->if_port = 11; + tp->csr6 = 0x814C0000 | (tp->full_duplex ? 0x0200 : 0); + iowrite32(0x0001, ioaddr + CSR15); + } else if (ioread32(ioaddr + CSR5) & TPLnkPass) + pnic_do_nway(dev); + else { + /* Start with 10mbps to do autonegotiation. */ + iowrite32(0x32, ioaddr + CSR12); + tp->csr6 = 0x00420000; + iowrite32(0x0001B078, ioaddr + 0xB8); + iowrite32(0x0201B078, ioaddr + 0xB8); + next_tick = 1*HZ; + } + } else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881) && + ! tp->medialock) { + dev->if_port = 0; + tp->csr6 = 0x01880000 | (tp->full_duplex ? 0x0200 : 0); + iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80); + } else if (tp->chip_id == MX98715 || tp->chip_id == MX98725) { + /* Provided by BOLO, Macronix - 12/10/1998. */ + dev->if_port = 0; + tp->csr6 = 0x01a80200; + iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80); + iowrite32(0x11000 | ioread16(ioaddr + 0xa0), ioaddr + 0xa0); + } else if (tp->chip_id == COMET || tp->chip_id == CONEXANT) { + /* Enable automatic Tx underrun recovery. */ + iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88); + dev->if_port = tp->mii_cnt ? 11 : 0; + tp->csr6 = 0x00040000; + } else if (tp->chip_id == AX88140) { + tp->csr6 = tp->mii_cnt ? 0x00040100 : 0x00000100; + } else + tulip_select_media(dev, 1); + + /* Start the chip's Tx to process setup frame. */ + tulip_stop_rxtx(tp); + barrier(); + udelay(5); + iowrite32(tp->csr6 | TxOn, ioaddr + CSR6); + + /* Enable interrupts by setting the interrupt mask. */ + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); + tulip_start_rxtx(tp); + iowrite32(0, ioaddr + CSR2); /* Rx poll demand */ + + if (tulip_debug > 2) { + netdev_dbg(dev, "Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n", + ioread32(ioaddr + CSR0), + ioread32(ioaddr + CSR5), + ioread32(ioaddr + CSR6)); + } + + /* Set the timer to switch to check for link beat and perhaps switch + to an alternate media type. */ + tp->timer.expires = RUN_AT(next_tick); + add_timer(&tp->timer); +#ifdef CONFIG_TULIP_NAPI + init_timer(&tp->oom_timer); + tp->oom_timer.data = (unsigned long)dev; + tp->oom_timer.function = oom_timer; +#endif +} + +static int +tulip_open(struct net_device *dev) +{ + int retval; + + tulip_init_ring (dev); + + retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev); + if (retval) + goto free_ring; + + tulip_up (dev); + + netif_start_queue (dev); + + return 0; + +free_ring: + tulip_free_ring (dev); + return retval; +} + + +static void tulip_tx_timeout(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + unsigned long flags; + + spin_lock_irqsave (&tp->lock, flags); + + if (tulip_media_cap[dev->if_port] & MediaIsMII) { + /* Do nothing -- the media monitor should handle this. */ + if (tulip_debug > 1) + dev_warn(&dev->dev, + "Transmit timeout using MII device\n"); + } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 || + tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 || + tp->chip_id == DM910X) { + dev_warn(&dev->dev, + "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n", + ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), + ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), + ioread32(ioaddr + CSR15)); + tp->timeout_recovery = 1; + schedule_work(&tp->media_work); + goto out_unlock; + } else if (tp->chip_id == PNIC2) { + dev_warn(&dev->dev, + "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n", + (int)ioread32(ioaddr + CSR5), + (int)ioread32(ioaddr + CSR6), + (int)ioread32(ioaddr + CSR7), + (int)ioread32(ioaddr + CSR12)); + } else { + dev_warn(&dev->dev, + "Transmit timed out, status %08x, CSR12 %08x, resetting...\n", + ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12)); + dev->if_port = 0; + } + +#if defined(way_too_many_messages) + if (tulip_debug > 3) { + int i; + for (i = 0; i < RX_RING_SIZE; i++) { + u8 *buf = (u8 *)(tp->rx_ring[i].buffer1); + int j; + printk(KERN_DEBUG + "%2d: %08x %08x %08x %08x %02x %02x %02x\n", + i, + (unsigned int)tp->rx_ring[i].status, + (unsigned int)tp->rx_ring[i].length, + (unsigned int)tp->rx_ring[i].buffer1, + (unsigned int)tp->rx_ring[i].buffer2, + buf[0], buf[1], buf[2]); + for (j = 0; buf[j] != 0xee && j < 1600; j++) + if (j < 100) + pr_cont(" %02x", buf[j]); + pr_cont(" j=%d\n", j); + } + printk(KERN_DEBUG " Rx ring %p: ", tp->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) + pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status); + printk(KERN_DEBUG " Tx ring %p: ", tp->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) + pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status); + pr_cont("\n"); + } +#endif + + tulip_tx_timeout_complete(tp, ioaddr); + +out_unlock: + spin_unlock_irqrestore (&tp->lock, flags); + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue (dev); +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void tulip_init_ring(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int i; + + tp->susp_rx = 0; + tp->ttimer = 0; + tp->nir = 0; + + for (i = 0; i < RX_RING_SIZE; i++) { + tp->rx_ring[i].status = 0x00000000; + tp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ); + tp->rx_ring[i].buffer2 = cpu_to_le32(tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * (i + 1)); + tp->rx_buffers[i].skb = NULL; + tp->rx_buffers[i].mapping = 0; + } + /* Mark the last entry as wrapping the ring. */ + tp->rx_ring[i-1].length = cpu_to_le32(PKT_BUF_SZ | DESC_RING_WRAP); + tp->rx_ring[i-1].buffer2 = cpu_to_le32(tp->rx_ring_dma); + + for (i = 0; i < RX_RING_SIZE; i++) { + dma_addr_t mapping; + + /* Note the receive buffer must be longword aligned. + dev_alloc_skb() provides 16 byte alignment. But do *not* + use skb_reserve() to align the IP header! */ + struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ); + tp->rx_buffers[i].skb = skb; + if (skb == NULL) + break; + mapping = pci_map_single(tp->pdev, skb->data, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + tp->rx_buffers[i].mapping = mapping; + skb->dev = dev; /* Mark as being used by this device. */ + tp->rx_ring[i].status = cpu_to_le32(DescOwned); /* Owned by Tulip chip */ + tp->rx_ring[i].buffer1 = cpu_to_le32(mapping); + } + tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + /* The Tx buffer descriptor is filled in as needed, but we + do need to clear the ownership bit. */ + for (i = 0; i < TX_RING_SIZE; i++) { + tp->tx_buffers[i].skb = NULL; + tp->tx_buffers[i].mapping = 0; + tp->tx_ring[i].status = 0x00000000; + tp->tx_ring[i].buffer2 = cpu_to_le32(tp->tx_ring_dma + sizeof(struct tulip_tx_desc) * (i + 1)); + } + tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma); +} + +static netdev_tx_t +tulip_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int entry; + u32 flag; + dma_addr_t mapping; + unsigned long flags; + + spin_lock_irqsave(&tp->lock, flags); + + /* Calculate the next Tx descriptor entry. */ + entry = tp->cur_tx % TX_RING_SIZE; + + tp->tx_buffers[entry].skb = skb; + mapping = pci_map_single(tp->pdev, skb->data, + skb->len, PCI_DMA_TODEVICE); + tp->tx_buffers[entry].mapping = mapping; + tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping); + + if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */ + flag = 0x60000000; /* No interrupt */ + } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) { + flag = 0xe0000000; /* Tx-done intr. */ + } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) { + flag = 0x60000000; /* No Tx-done intr. */ + } else { /* Leave room for set_rx_mode() to fill entries. */ + flag = 0xe0000000; /* Tx-done intr. */ + netif_stop_queue(dev); + } + if (entry == TX_RING_SIZE-1) + flag = 0xe0000000 | DESC_RING_WRAP; + + tp->tx_ring[entry].length = cpu_to_le32(skb->len | flag); + /* if we were using Transmit Automatic Polling, we would need a + * wmb() here. */ + tp->tx_ring[entry].status = cpu_to_le32(DescOwned); + wmb(); + + tp->cur_tx++; + + /* Trigger an immediate transmit demand. */ + iowrite32(0, tp->base_addr + CSR1); + + spin_unlock_irqrestore(&tp->lock, flags); + + return NETDEV_TX_OK; +} + +static void tulip_clean_tx_ring(struct tulip_private *tp) +{ + unsigned int dirty_tx; + + for (dirty_tx = tp->dirty_tx ; tp->cur_tx - dirty_tx > 0; + dirty_tx++) { + int entry = dirty_tx % TX_RING_SIZE; + int status = le32_to_cpu(tp->tx_ring[entry].status); + + if (status < 0) { + tp->dev->stats.tx_errors++; /* It wasn't Txed */ + tp->tx_ring[entry].status = 0; + } + + /* Check for Tx filter setup frames. */ + if (tp->tx_buffers[entry].skb == NULL) { + /* test because dummy frames not mapped */ + if (tp->tx_buffers[entry].mapping) + pci_unmap_single(tp->pdev, + tp->tx_buffers[entry].mapping, + sizeof(tp->setup_frame), + PCI_DMA_TODEVICE); + continue; + } + + pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping, + tp->tx_buffers[entry].skb->len, + PCI_DMA_TODEVICE); + + /* Free the original skb. */ + dev_kfree_skb_irq(tp->tx_buffers[entry].skb); + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + } +} + +static void tulip_down (struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + unsigned long flags; + + cancel_work_sync(&tp->media_work); + +#ifdef CONFIG_TULIP_NAPI + napi_disable(&tp->napi); +#endif + + del_timer_sync (&tp->timer); +#ifdef CONFIG_TULIP_NAPI + del_timer_sync (&tp->oom_timer); +#endif + spin_lock_irqsave (&tp->lock, flags); + + /* Disable interrupts by clearing the interrupt mask. */ + iowrite32 (0x00000000, ioaddr + CSR7); + + /* Stop the Tx and Rx processes. */ + tulip_stop_rxtx(tp); + + /* prepare receive buffers */ + tulip_refill_rx(dev); + + /* release any unconsumed transmit buffers */ + tulip_clean_tx_ring(tp); + + if (ioread32(ioaddr + CSR6) != 0xffffffff) + dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff; + + spin_unlock_irqrestore (&tp->lock, flags); + + init_timer(&tp->timer); + tp->timer.data = (unsigned long)dev; + tp->timer.function = tulip_tbl[tp->chip_id].media_timer; + + dev->if_port = tp->saved_if_port; + + /* Leave the driver in snooze, not sleep, mode. */ + tulip_set_power_state (tp, 0, 1); +} + +static void tulip_free_ring (struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int i; + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = tp->rx_buffers[i].skb; + dma_addr_t mapping = tp->rx_buffers[i].mapping; + + tp->rx_buffers[i].skb = NULL; + tp->rx_buffers[i].mapping = 0; + + tp->rx_ring[i].status = 0; /* Not owned by Tulip chip. */ + tp->rx_ring[i].length = 0; + /* An invalid address. */ + tp->rx_ring[i].buffer1 = cpu_to_le32(0xBADF00D0); + if (skb) { + pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ, + PCI_DMA_FROMDEVICE); + dev_kfree_skb (skb); + } + } + + for (i = 0; i < TX_RING_SIZE; i++) { + struct sk_buff *skb = tp->tx_buffers[i].skb; + + if (skb != NULL) { + pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb (skb); + } + tp->tx_buffers[i].skb = NULL; + tp->tx_buffers[i].mapping = 0; + } +} + +static int tulip_close (struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + + netif_stop_queue (dev); + + tulip_down (dev); + + if (tulip_debug > 1) + netdev_dbg(dev, "Shutting down ethercard, status was %02x\n", + ioread32 (ioaddr + CSR5)); + + free_irq (dev->irq, dev); + + tulip_free_ring (dev); + + return 0; +} + +static struct net_device_stats *tulip_get_stats(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + + if (netif_running(dev)) { + unsigned long flags; + + spin_lock_irqsave (&tp->lock, flags); + + dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff; + + spin_unlock_irqrestore(&tp->lock, flags); + } + + return &dev->stats; +} + + +static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct tulip_private *np = netdev_priv(dev); + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(np->pdev)); +} + + +static int tulip_ethtool_set_wol(struct net_device *dev, + struct ethtool_wolinfo *wolinfo) +{ + struct tulip_private *tp = netdev_priv(dev); + + if (wolinfo->wolopts & (~tp->wolinfo.supported)) + return -EOPNOTSUPP; + + tp->wolinfo.wolopts = wolinfo->wolopts; + device_set_wakeup_enable(&tp->pdev->dev, tp->wolinfo.wolopts); + return 0; +} + +static void tulip_ethtool_get_wol(struct net_device *dev, + struct ethtool_wolinfo *wolinfo) +{ + struct tulip_private *tp = netdev_priv(dev); + + wolinfo->supported = tp->wolinfo.supported; + wolinfo->wolopts = tp->wolinfo.wolopts; + return; +} + + +static const struct ethtool_ops ops = { + .get_drvinfo = tulip_get_drvinfo, + .set_wol = tulip_ethtool_set_wol, + .get_wol = tulip_ethtool_get_wol, +}; + +/* Provide ioctl() calls to examine the MII xcvr state. */ +static int private_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + struct mii_ioctl_data *data = if_mii(rq); + const unsigned int phy_idx = 0; + int phy = tp->phys[phy_idx] & 0x1f; + unsigned int regnum = data->reg_num; + + switch (cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + if (tp->mii_cnt) + data->phy_id = phy; + else if (tp->flags & HAS_NWAY) + data->phy_id = 32; + else if (tp->chip_id == COMET) + data->phy_id = 1; + else + return -ENODEV; + + case SIOCGMIIREG: /* Read MII PHY register. */ + if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) { + int csr12 = ioread32 (ioaddr + CSR12); + int csr14 = ioread32 (ioaddr + CSR14); + switch (regnum) { + case 0: + if (((csr14<<5) & 0x1000) || + (dev->if_port == 5 && tp->nwayset)) + data->val_out = 0x1000; + else + data->val_out = (tulip_media_cap[dev->if_port]&MediaIs100 ? 0x2000 : 0) + | (tulip_media_cap[dev->if_port]&MediaIsFD ? 0x0100 : 0); + break; + case 1: + data->val_out = + 0x1848 + + ((csr12&0x7000) == 0x5000 ? 0x20 : 0) + + ((csr12&0x06) == 6 ? 0 : 4); + data->val_out |= 0x6048; + break; + case 4: + /* Advertised value, bogus 10baseTx-FD value from CSR6. */ + data->val_out = + ((ioread32(ioaddr + CSR6) >> 3) & 0x0040) + + ((csr14 >> 1) & 0x20) + 1; + data->val_out |= ((csr14 >> 9) & 0x03C0); + break; + case 5: data->val_out = tp->lpar; break; + default: data->val_out = 0; break; + } + } else { + data->val_out = tulip_mdio_read (dev, data->phy_id & 0x1f, regnum); + } + return 0; + + case SIOCSMIIREG: /* Write MII PHY register. */ + if (regnum & ~0x1f) + return -EINVAL; + if (data->phy_id == phy) { + u16 value = data->val_in; + switch (regnum) { + case 0: /* Check for autonegotiation on or reset. */ + tp->full_duplex_lock = (value & 0x9000) ? 0 : 1; + if (tp->full_duplex_lock) + tp->full_duplex = (value & 0x0100) ? 1 : 0; + break; + case 4: + tp->advertising[phy_idx] = + tp->mii_advertise = data->val_in; + break; + } + } + if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) { + u16 value = data->val_in; + if (regnum == 0) { + if ((value & 0x1200) == 0x1200) { + if (tp->chip_id == PNIC2) { + pnic2_start_nway (dev); + } else { + t21142_start_nway (dev); + } + } + } else if (regnum == 4) + tp->sym_advertise = value; + } else { + tulip_mdio_write (dev, data->phy_id & 0x1f, regnum, data->val_in); + } + return 0; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + + +/* Set or clear the multicast filter for this adaptor. + Note that we only use exclusion around actually queueing the + new frame, not around filling tp->setup_frame. This is non-deterministic + when re-entered but still correct. */ + +#undef set_bit_le +#define set_bit_le(i,p) do { ((char *)(p))[(i)/8] |= (1<<((i)%8)); } while(0) + +static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + u16 hash_table[32]; + struct netdev_hw_addr *ha; + int i; + u16 *eaddrs; + + memset(hash_table, 0, sizeof(hash_table)); + set_bit_le(255, hash_table); /* Broadcast entry */ + /* This should work on big-endian machines as well. */ + netdev_for_each_mc_addr(ha, dev) { + int index = ether_crc_le(ETH_ALEN, ha->addr) & 0x1ff; + + set_bit_le(index, hash_table); + } + for (i = 0; i < 32; i++) { + *setup_frm++ = hash_table[i]; + *setup_frm++ = hash_table[i]; + } + setup_frm = &tp->setup_frame[13*6]; + + /* Fill the final entry with our physical address. */ + eaddrs = (u16 *)dev->dev_addr; + *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; + *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; + *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; +} + +static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + struct netdev_hw_addr *ha; + u16 *eaddrs; + + /* We have <= 14 addresses so we can use the wonderful + 16 address perfect filtering of the Tulip. */ + netdev_for_each_mc_addr(ha, dev) { + eaddrs = (u16 *) ha->addr; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + } + /* Fill the unused entries with the broadcast address. */ + memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12); + setup_frm = &tp->setup_frame[15*6]; + + /* Fill the final entry with our physical address. */ + eaddrs = (u16 *)dev->dev_addr; + *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; + *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; + *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; +} + + +static void set_rx_mode(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr6; + + csr6 = ioread32(ioaddr + CSR6) & ~0x00D5; + + tp->csr6 &= ~0x00D5; + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + tp->csr6 |= AcceptAllMulticast | AcceptAllPhys; + csr6 |= AcceptAllMulticast | AcceptAllPhys; + } else if ((netdev_mc_count(dev) > 1000) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter well -- accept all multicasts. */ + tp->csr6 |= AcceptAllMulticast; + csr6 |= AcceptAllMulticast; + } else if (tp->flags & MC_HASH_ONLY) { + /* Some work-alikes have only a 64-entry hash filter table. */ + /* Should verify correctness on big-endian/__powerpc__ */ + struct netdev_hw_addr *ha; + if (netdev_mc_count(dev) > 64) { + /* Arbitrary non-effective limit. */ + tp->csr6 |= AcceptAllMulticast; + csr6 |= AcceptAllMulticast; + } else { + u32 mc_filter[2] = {0, 0}; /* Multicast hash filter */ + int filterbit; + netdev_for_each_mc_addr(ha, dev) { + if (tp->flags & COMET_MAC_ADDR) + filterbit = ether_crc_le(ETH_ALEN, + ha->addr); + else + filterbit = ether_crc(ETH_ALEN, + ha->addr) >> 26; + filterbit &= 0x3f; + mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); + if (tulip_debug > 2) + dev_info(&dev->dev, + "Added filter for %pM %08x bit %d\n", + ha->addr, + ether_crc(ETH_ALEN, ha->addr), + filterbit); + } + if (mc_filter[0] == tp->mc_filter[0] && + mc_filter[1] == tp->mc_filter[1]) + ; /* No change. */ + else if (tp->flags & IS_ASIX) { + iowrite32(2, ioaddr + CSR13); + iowrite32(mc_filter[0], ioaddr + CSR14); + iowrite32(3, ioaddr + CSR13); + iowrite32(mc_filter[1], ioaddr + CSR14); + } else if (tp->flags & COMET_MAC_ADDR) { + iowrite32(mc_filter[0], ioaddr + CSR27); + iowrite32(mc_filter[1], ioaddr + CSR28); + } + tp->mc_filter[0] = mc_filter[0]; + tp->mc_filter[1] = mc_filter[1]; + } + } else { + unsigned long flags; + u32 tx_flags = 0x08000000 | 192; + + /* Note that only the low-address shortword of setup_frame is valid! + The values are doubled for big-endian architectures. */ + if (netdev_mc_count(dev) > 14) { + /* Must use a multicast hash table. */ + build_setup_frame_hash(tp->setup_frame, dev); + tx_flags = 0x08400000 | 192; + } else { + build_setup_frame_perfect(tp->setup_frame, dev); + } + + spin_lock_irqsave(&tp->lock, flags); + + if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) { + /* Same setup recently queued, we need not add it. */ + } else { + unsigned int entry; + int dummy = -1; + + /* Now add this frame to the Tx list. */ + + entry = tp->cur_tx++ % TX_RING_SIZE; + + if (entry != 0) { + /* Avoid a chip errata by prefixing a dummy entry. */ + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + tp->tx_ring[entry].length = + (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; + tp->tx_ring[entry].buffer1 = 0; + /* Must set DescOwned later to avoid race with chip */ + dummy = entry; + entry = tp->cur_tx++ % TX_RING_SIZE; + + } + + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = + pci_map_single(tp->pdev, tp->setup_frame, + sizeof(tp->setup_frame), + PCI_DMA_TODEVICE); + /* Put the setup frame on the Tx list. */ + if (entry == TX_RING_SIZE-1) + tx_flags |= DESC_RING_WRAP; /* Wrap ring. */ + tp->tx_ring[entry].length = cpu_to_le32(tx_flags); + tp->tx_ring[entry].buffer1 = + cpu_to_le32(tp->tx_buffers[entry].mapping); + tp->tx_ring[entry].status = cpu_to_le32(DescOwned); + if (dummy >= 0) + tp->tx_ring[dummy].status = cpu_to_le32(DescOwned); + if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2) + netif_stop_queue(dev); + + /* Trigger an immediate transmit demand. */ + iowrite32(0, ioaddr + CSR1); + } + + spin_unlock_irqrestore(&tp->lock, flags); + } + + iowrite32(csr6, ioaddr + CSR6); +} + +#ifdef CONFIG_TULIP_MWI +static void __devinit tulip_mwi_config (struct pci_dev *pdev, + struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + u8 cache; + u16 pci_command; + u32 csr0; + + if (tulip_debug > 3) + netdev_dbg(dev, "tulip_mwi_config()\n"); + + tp->csr0 = csr0 = 0; + + /* if we have any cache line size at all, we can do MRM and MWI */ + csr0 |= MRM | MWI; + + /* Enable MWI in the standard PCI command bit. + * Check for the case where MWI is desired but not available + */ + pci_try_set_mwi(pdev); + + /* read result from hardware (in case bit refused to enable) */ + pci_read_config_word(pdev, PCI_COMMAND, &pci_command); + if ((csr0 & MWI) && (!(pci_command & PCI_COMMAND_INVALIDATE))) + csr0 &= ~MWI; + + /* if cache line size hardwired to zero, no MWI */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache); + if ((csr0 & MWI) && (cache == 0)) { + csr0 &= ~MWI; + pci_clear_mwi(pdev); + } + + /* assign per-cacheline-size cache alignment and + * burst length values + */ + switch (cache) { + case 8: + csr0 |= MRL | (1 << CALShift) | (16 << BurstLenShift); + break; + case 16: + csr0 |= MRL | (2 << CALShift) | (16 << BurstLenShift); + break; + case 32: + csr0 |= MRL | (3 << CALShift) | (32 << BurstLenShift); + break; + default: + cache = 0; + break; + } + + /* if we have a good cache line size, we by now have a good + * csr0, so save it and exit + */ + if (cache) + goto out; + + /* we don't have a good csr0 or cache line size, disable MWI */ + if (csr0 & MWI) { + pci_clear_mwi(pdev); + csr0 &= ~MWI; + } + + /* sane defaults for burst length and cache alignment + * originally from de4x5 driver + */ + csr0 |= (8 << BurstLenShift) | (1 << CALShift); + +out: + tp->csr0 = csr0; + if (tulip_debug > 2) + netdev_dbg(dev, "MWI config cacheline=%d, csr0=%08x\n", + cache, csr0); +} +#endif + +/* + * Chips that have the MRM/reserved bit quirk and the burst quirk. That + * is the DM910X and the on chip ULi devices + */ + +static int tulip_uli_dm_quirk(struct pci_dev *pdev) +{ + if (pdev->vendor == 0x1282 && pdev->device == 0x9102) + return 1; + return 0; +} + +static const struct net_device_ops tulip_netdev_ops = { + .ndo_open = tulip_open, + .ndo_start_xmit = tulip_start_xmit, + .ndo_tx_timeout = tulip_tx_timeout, + .ndo_stop = tulip_close, + .ndo_get_stats = tulip_get_stats, + .ndo_do_ioctl = private_ioctl, + .ndo_set_multicast_list = set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_tulip, +#endif +}; + +DEFINE_PCI_DEVICE_TABLE(early_486_chipsets) = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) }, + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) }, + { }, +}; + +static int __devinit tulip_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct tulip_private *tp; + /* See note below on the multiport cards. */ + static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'}; + static int last_irq; + static int multiport_cnt; /* For four-port boards w/one EEPROM */ + int i, irq; + unsigned short sum; + unsigned char *ee_data; + struct net_device *dev; + void __iomem *ioaddr; + static int board_idx = -1; + int chip_idx = ent->driver_data; + const char *chip_name = tulip_tbl[chip_idx].chip_name; + unsigned int eeprom_missing = 0; + unsigned int force_csr0 = 0; + +#ifndef MODULE + if (tulip_debug > 0) + printk_once(KERN_INFO "%s", version); +#endif + + board_idx++; + + /* + * Lan media wire a tulip chip to a wan interface. Needs a very + * different driver (lmc driver) + */ + + if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) { + pr_err("skipping LMC card\n"); + return -ENODEV; + } else if (pdev->subsystem_vendor == PCI_VENDOR_ID_SBE && + (pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_T3E3 || + pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P0 || + pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P1)) { + pr_err("skipping SBE T3E3 port\n"); + return -ENODEV; + } + + /* + * DM910x chips should be handled by the dmfe driver, except + * on-board chips on SPARC systems. Also, early DM9100s need + * software CRC which only the dmfe driver supports. + */ + +#ifdef CONFIG_TULIP_DM910X + if (chip_idx == DM910X) { + struct device_node *dp; + + if (pdev->vendor == 0x1282 && pdev->device == 0x9100 && + pdev->revision < 0x30) { + pr_info("skipping early DM9100 with Crc bug (use dmfe)\n"); + return -ENODEV; + } + + dp = pci_device_to_OF_node(pdev); + if (!(dp && of_get_property(dp, "local-mac-address", NULL))) { + pr_info("skipping DM910x expansion card (use dmfe)\n"); + return -ENODEV; + } + } +#endif + + /* + * Looks for early PCI chipsets where people report hangs + * without the workarounds being on. + */ + + /* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache + aligned. Aries might need this too. The Saturn errata are not + pretty reading but thankfully it's an old 486 chipset. + + 2. The dreaded SiS496 486 chipset. Same workaround as Intel + Saturn. + */ + + if (pci_dev_present(early_486_chipsets)) { + csr0 = MRL | MRM | (8 << BurstLenShift) | (1 << CALShift); + force_csr0 = 1; + } + + /* bugfix: the ASIX must have a burst limit or horrible things happen. */ + if (chip_idx == AX88140) { + if ((csr0 & 0x3f00) == 0) + csr0 |= 0x2000; + } + + /* PNIC doesn't have MWI/MRL/MRM... */ + if (chip_idx == LC82C168) + csr0 &= ~0xfff10000; /* zero reserved bits 31:20, 16 */ + + /* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */ + if (tulip_uli_dm_quirk(pdev)) { + csr0 &= ~0x01f100ff; +#if defined(CONFIG_SPARC) + csr0 = (csr0 & ~0xff00) | 0xe000; +#endif + } + /* + * And back to business + */ + + i = pci_enable_device(pdev); + if (i) { + pr_err("Cannot enable tulip board #%d, aborting\n", board_idx); + return i; + } + + /* The chip will fail to enter a low-power state later unless + * first explicitly commanded into D0 */ + if (pci_set_power_state(pdev, PCI_D0)) { + pr_notice("Failed to set power state to D0\n"); + } + + irq = pdev->irq; + + /* alloc_etherdev ensures aligned and zeroed private structures */ + dev = alloc_etherdev (sizeof (*tp)); + if (!dev) { + pr_err("ether device alloc failed, aborting\n"); + return -ENOMEM; + } + + SET_NETDEV_DEV(dev, &pdev->dev); + if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) { + pr_err("%s: I/O region (0x%llx@0x%llx) too small, aborting\n", + pci_name(pdev), + (unsigned long long)pci_resource_len (pdev, 0), + (unsigned long long)pci_resource_start (pdev, 0)); + goto err_out_free_netdev; + } + + /* grab all resources from both PIO and MMIO regions, as we + * don't want anyone else messing around with our hardware */ + if (pci_request_regions (pdev, DRV_NAME)) + goto err_out_free_netdev; + + ioaddr = pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size); + + if (!ioaddr) + goto err_out_free_res; + + /* + * initialize private data structure 'tp' + * it is zeroed and aligned in alloc_etherdev + */ + tp = netdev_priv(dev); + tp->dev = dev; + + tp->rx_ring = pci_alloc_consistent(pdev, + sizeof(struct tulip_rx_desc) * RX_RING_SIZE + + sizeof(struct tulip_tx_desc) * TX_RING_SIZE, + &tp->rx_ring_dma); + if (!tp->rx_ring) + goto err_out_mtable; + tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE); + tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE; + + tp->chip_id = chip_idx; + tp->flags = tulip_tbl[chip_idx].flags; + + tp->wolinfo.supported = 0; + tp->wolinfo.wolopts = 0; + /* COMET: Enable power management only for AN983B */ + if (chip_idx == COMET ) { + u32 sig; + pci_read_config_dword (pdev, 0x80, &sig); + if (sig == 0x09811317) { + tp->flags |= COMET_PM; + tp->wolinfo.supported = WAKE_PHY | WAKE_MAGIC; + pr_info("%s: Enabled WOL support for AN983B\n", + __func__); + } + } + tp->pdev = pdev; + tp->base_addr = ioaddr; + tp->revision = pdev->revision; + tp->csr0 = csr0; + spin_lock_init(&tp->lock); + spin_lock_init(&tp->mii_lock); + init_timer(&tp->timer); + tp->timer.data = (unsigned long)dev; + tp->timer.function = tulip_tbl[tp->chip_id].media_timer; + + INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task); + + dev->base_addr = (unsigned long)ioaddr; + +#ifdef CONFIG_TULIP_MWI + if (!force_csr0 && (tp->flags & HAS_PCI_MWI)) + tulip_mwi_config (pdev, dev); +#endif + + /* Stop the chip's Tx and Rx processes. */ + tulip_stop_rxtx(tp); + + pci_set_master(pdev); + +#ifdef CONFIG_GSC + if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) { + switch (pdev->subsystem_device) { + default: + break; + case 0x1061: + case 0x1062: + case 0x1063: + case 0x1098: + case 0x1099: + case 0x10EE: + tp->flags |= HAS_SWAPPED_SEEPROM | NEEDS_FAKE_MEDIA_TABLE; + chip_name = "GSC DS21140 Tulip"; + } + } +#endif + + /* Clear the missed-packet counter. */ + ioread32(ioaddr + CSR8); + + /* The station address ROM is read byte serially. The register must + be polled, waiting for the value to be read bit serially from the + EEPROM. + */ + ee_data = tp->eeprom; + memset(ee_data, 0, sizeof(tp->eeprom)); + sum = 0; + if (chip_idx == LC82C168) { + for (i = 0; i < 3; i++) { + int value, boguscnt = 100000; + iowrite32(0x600 | i, ioaddr + 0x98); + do { + value = ioread32(ioaddr + CSR9); + } while (value < 0 && --boguscnt > 0); + put_unaligned_le16(value, ((__le16 *)dev->dev_addr) + i); + sum += value & 0xffff; + } + } else if (chip_idx == COMET) { + /* No need to read the EEPROM. */ + put_unaligned_le32(ioread32(ioaddr + 0xA4), dev->dev_addr); + put_unaligned_le16(ioread32(ioaddr + 0xA8), dev->dev_addr + 4); + for (i = 0; i < 6; i ++) + sum += dev->dev_addr[i]; + } else { + /* A serial EEPROM interface, we read now and sort it out later. */ + int sa_offset = 0; + int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6; + int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16); + + if (ee_max_addr > sizeof(tp->eeprom)) + ee_max_addr = sizeof(tp->eeprom); + + for (i = 0; i < ee_max_addr ; i += sizeof(u16)) { + u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size); + ee_data[i] = data & 0xff; + ee_data[i + 1] = data >> 8; + } + + /* DEC now has a specification (see Notes) but early board makers + just put the address in the first EEPROM locations. */ + /* This does memcmp(ee_data, ee_data+16, 8) */ + for (i = 0; i < 8; i ++) + if (ee_data[i] != ee_data[16+i]) + sa_offset = 20; + if (chip_idx == CONEXANT) { + /* Check that the tuple type and length is correct. */ + if (ee_data[0x198] == 0x04 && ee_data[0x199] == 6) + sa_offset = 0x19A; + } else if (ee_data[0] == 0xff && ee_data[1] == 0xff && + ee_data[2] == 0) { + sa_offset = 2; /* Grrr, damn Matrox boards. */ + multiport_cnt = 4; + } +#ifdef CONFIG_MIPS_COBALT + if ((pdev->bus->number == 0) && + ((PCI_SLOT(pdev->devfn) == 7) || + (PCI_SLOT(pdev->devfn) == 12))) { + /* Cobalt MAC address in first EEPROM locations. */ + sa_offset = 0; + /* Ensure our media table fixup get's applied */ + memcpy(ee_data + 16, ee_data, 8); + } +#endif +#ifdef CONFIG_GSC + /* Check to see if we have a broken srom */ + if (ee_data[0] == 0x61 && ee_data[1] == 0x10) { + /* pci_vendor_id and subsystem_id are swapped */ + ee_data[0] = ee_data[2]; + ee_data[1] = ee_data[3]; + ee_data[2] = 0x61; + ee_data[3] = 0x10; + + /* HSC-PCI boards need to be byte-swaped and shifted + * up 1 word. This shift needs to happen at the end + * of the MAC first because of the 2 byte overlap. + */ + for (i = 4; i >= 0; i -= 2) { + ee_data[17 + i + 3] = ee_data[17 + i]; + ee_data[16 + i + 5] = ee_data[16 + i]; + } + } +#endif + + for (i = 0; i < 6; i ++) { + dev->dev_addr[i] = ee_data[i + sa_offset]; + sum += ee_data[i + sa_offset]; + } + } + /* Lite-On boards have the address byte-swapped. */ + if ((dev->dev_addr[0] == 0xA0 || + dev->dev_addr[0] == 0xC0 || + dev->dev_addr[0] == 0x02) && + dev->dev_addr[1] == 0x00) + for (i = 0; i < 6; i+=2) { + char tmp = dev->dev_addr[i]; + dev->dev_addr[i] = dev->dev_addr[i+1]; + dev->dev_addr[i+1] = tmp; + } + /* On the Zynx 315 Etherarray and other multiport boards only the + first Tulip has an EEPROM. + On Sparc systems the mac address is held in the OBP property + "local-mac-address". + The addresses of the subsequent ports are derived from the first. + Many PCI BIOSes also incorrectly report the IRQ line, so we correct + that here as well. */ + if (sum == 0 || sum == 6*0xff) { +#if defined(CONFIG_SPARC) + struct device_node *dp = pci_device_to_OF_node(pdev); + const unsigned char *addr; + int len; +#endif + eeprom_missing = 1; + for (i = 0; i < 5; i++) + dev->dev_addr[i] = last_phys_addr[i]; + dev->dev_addr[i] = last_phys_addr[i] + 1; +#if defined(CONFIG_SPARC) + addr = of_get_property(dp, "local-mac-address", &len); + if (addr && len == 6) + memcpy(dev->dev_addr, addr, 6); +#endif +#if defined(__i386__) || defined(__x86_64__) /* Patch up x86 BIOS bug. */ + if (last_irq) + irq = last_irq; +#endif + } + + for (i = 0; i < 6; i++) + last_phys_addr[i] = dev->dev_addr[i]; + last_irq = irq; + dev->irq = irq; + + /* The lower four bits are the media type. */ + if (board_idx >= 0 && board_idx < MAX_UNITS) { + if (options[board_idx] & MEDIA_MASK) + tp->default_port = options[board_idx] & MEDIA_MASK; + if ((options[board_idx] & FullDuplex) || full_duplex[board_idx] > 0) + tp->full_duplex = 1; + if (mtu[board_idx] > 0) + dev->mtu = mtu[board_idx]; + } + if (dev->mem_start & MEDIA_MASK) + tp->default_port = dev->mem_start & MEDIA_MASK; + if (tp->default_port) { + pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n", + board_idx, medianame[tp->default_port & MEDIA_MASK]); + tp->medialock = 1; + if (tulip_media_cap[tp->default_port] & MediaAlwaysFD) + tp->full_duplex = 1; + } + if (tp->full_duplex) + tp->full_duplex_lock = 1; + + if (tulip_media_cap[tp->default_port] & MediaIsMII) { + static const u16 media2advert[] = { + 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 + }; + tp->mii_advertise = media2advert[tp->default_port - 9]; + tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */ + } + + if (tp->flags & HAS_MEDIA_TABLE) { + sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */ + tulip_parse_eeprom(dev); + strcpy(dev->name, "eth%d"); /* un-hack */ + } + + if ((tp->flags & ALWAYS_CHECK_MII) || + (tp->mtable && tp->mtable->has_mii) || + ( ! tp->mtable && (tp->flags & HAS_MII))) { + if (tp->mtable && tp->mtable->has_mii) { + for (i = 0; i < tp->mtable->leafcount; i++) + if (tp->mtable->mleaf[i].media == 11) { + tp->cur_index = i; + tp->saved_if_port = dev->if_port; + tulip_select_media(dev, 2); + dev->if_port = tp->saved_if_port; + break; + } + } + + /* Find the connected MII xcvrs. + Doing this in open() would allow detecting external xcvrs + later, but takes much time. */ + tulip_find_mii (dev, board_idx); + } + + /* The Tulip-specific entries in the device structure. */ + dev->netdev_ops = &tulip_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; +#ifdef CONFIG_TULIP_NAPI + netif_napi_add(dev, &tp->napi, tulip_poll, 16); +#endif + SET_ETHTOOL_OPS(dev, &ops); + + if (register_netdev(dev)) + goto err_out_free_ring; + + pci_set_drvdata(pdev, dev); + + dev_info(&dev->dev, +#ifdef CONFIG_TULIP_MMIO + "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n", +#else + "%s rev %d at Port %#llx,%s %pM, IRQ %d\n", +#endif + chip_name, pdev->revision, + (unsigned long long)pci_resource_start(pdev, TULIP_BAR), + eeprom_missing ? " EEPROM not present," : "", + dev->dev_addr, irq); + + if (tp->chip_id == PNIC2) + tp->link_change = pnic2_lnk_change; + else if (tp->flags & HAS_NWAY) + tp->link_change = t21142_lnk_change; + else if (tp->flags & HAS_PNICNWAY) + tp->link_change = pnic_lnk_change; + + /* Reset the xcvr interface and turn on heartbeat. */ + switch (chip_idx) { + case DC21140: + case DM910X: + default: + if (tp->mtable) + iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12); + break; + case DC21142: + if (tp->mii_cnt || tulip_media_cap[dev->if_port] & MediaIsMII) { + iowrite32(csr6_mask_defstate, ioaddr + CSR6); + iowrite32(0x0000, ioaddr + CSR13); + iowrite32(0x0000, ioaddr + CSR14); + iowrite32(csr6_mask_hdcap, ioaddr + CSR6); + } else + t21142_start_nway(dev); + break; + case PNIC2: + /* just do a reset for sanity sake */ + iowrite32(0x0000, ioaddr + CSR13); + iowrite32(0x0000, ioaddr + CSR14); + break; + case LC82C168: + if ( ! tp->mii_cnt) { + tp->nway = 1; + tp->nwayset = 0; + iowrite32(csr6_ttm | csr6_ca, ioaddr + CSR6); + iowrite32(0x30, ioaddr + CSR12); + iowrite32(0x0001F078, ioaddr + CSR6); + iowrite32(0x0201F078, ioaddr + CSR6); /* Turn on autonegotiation. */ + } + break; + case MX98713: + case COMPEX9881: + iowrite32(0x00000000, ioaddr + CSR6); + iowrite32(0x000711C0, ioaddr + CSR14); /* Turn on NWay. */ + iowrite32(0x00000001, ioaddr + CSR13); + break; + case MX98715: + case MX98725: + iowrite32(0x01a80000, ioaddr + CSR6); + iowrite32(0xFFFFFFFF, ioaddr + CSR14); + iowrite32(0x00001000, ioaddr + CSR12); + break; + case COMET: + /* No initialization necessary. */ + break; + } + + /* put the chip in snooze mode until opened */ + tulip_set_power_state (tp, 0, 1); + + return 0; + +err_out_free_ring: + pci_free_consistent (pdev, + sizeof (struct tulip_rx_desc) * RX_RING_SIZE + + sizeof (struct tulip_tx_desc) * TX_RING_SIZE, + tp->rx_ring, tp->rx_ring_dma); + +err_out_mtable: + kfree (tp->mtable); + pci_iounmap(pdev, ioaddr); + +err_out_free_res: + pci_release_regions (pdev); + +err_out_free_netdev: + free_netdev (dev); + return -ENODEV; +} + + +/* set the registers according to the given wolopts */ +static void tulip_set_wolopts (struct pci_dev *pdev, u32 wolopts) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + + if (tp->flags & COMET_PM) { + + unsigned int tmp; + + tmp = ioread32(ioaddr + CSR18); + tmp &= ~(comet_csr18_pmes_sticky | comet_csr18_apm_mode | comet_csr18_d3a); + tmp |= comet_csr18_pm_mode; + iowrite32(tmp, ioaddr + CSR18); + + /* Set the Wake-up Control/Status Register to the given WOL options*/ + tmp = ioread32(ioaddr + CSR13); + tmp &= ~(comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_wfre | comet_csr13_lsce | comet_csr13_mpre); + if (wolopts & WAKE_MAGIC) + tmp |= comet_csr13_mpre; + if (wolopts & WAKE_PHY) + tmp |= comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_lsce; + /* Clear the event flags */ + tmp |= comet_csr13_wfr | comet_csr13_mpr | comet_csr13_lsc; + iowrite32(tmp, ioaddr + CSR13); + } +} + +#ifdef CONFIG_PM + + +static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) +{ + pci_power_t pstate; + struct net_device *dev = pci_get_drvdata(pdev); + struct tulip_private *tp = netdev_priv(dev); + + if (!dev) + return -EINVAL; + + if (!netif_running(dev)) + goto save_state; + + tulip_down(dev); + + netif_device_detach(dev); + free_irq(dev->irq, dev); + +save_state: + pci_save_state(pdev); + pci_disable_device(pdev); + pstate = pci_choose_state(pdev, state); + if (state.event == PM_EVENT_SUSPEND && pstate != PCI_D0) { + int rc; + + tulip_set_wolopts(pdev, tp->wolinfo.wolopts); + rc = pci_enable_wake(pdev, pstate, tp->wolinfo.wolopts); + if (rc) + pr_err("pci_enable_wake failed (%d)\n", rc); + } + pci_set_power_state(pdev, pstate); + + return 0; +} + + +static int tulip_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int retval; + unsigned int tmp; + + if (!dev) + return -EINVAL; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if (!netif_running(dev)) + return 0; + + if ((retval = pci_enable_device(pdev))) { + pr_err("pci_enable_device failed in resume\n"); + return retval; + } + + if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) { + pr_err("request_irq failed in resume\n"); + return retval; + } + + if (tp->flags & COMET_PM) { + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + /* Clear the PMES flag */ + tmp = ioread32(ioaddr + CSR20); + tmp |= comet_csr20_pmes; + iowrite32(tmp, ioaddr + CSR20); + + /* Disable all wake-up events */ + tulip_set_wolopts(pdev, 0); + } + netif_device_attach(dev); + + if (netif_running(dev)) + tulip_up(dev); + + return 0; +} + +#endif /* CONFIG_PM */ + + +static void __devexit tulip_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct tulip_private *tp; + + if (!dev) + return; + + tp = netdev_priv(dev); + unregister_netdev(dev); + pci_free_consistent (pdev, + sizeof (struct tulip_rx_desc) * RX_RING_SIZE + + sizeof (struct tulip_tx_desc) * TX_RING_SIZE, + tp->rx_ring, tp->rx_ring_dma); + kfree (tp->mtable); + pci_iounmap(pdev, tp->base_addr); + free_netdev (dev); + pci_release_regions (pdev); + pci_set_drvdata (pdev, NULL); + + /* pci_power_off (pdev, -1); */ +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ + +static void poll_tulip (struct net_device *dev) +{ + /* disable_irq here is not very nice, but with the lockless + interrupt handler we have no other choice. */ + disable_irq(dev->irq); + tulip_interrupt (dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +static struct pci_driver tulip_driver = { + .name = DRV_NAME, + .id_table = tulip_pci_tbl, + .probe = tulip_init_one, + .remove = __devexit_p(tulip_remove_one), +#ifdef CONFIG_PM + .suspend = tulip_suspend, + .resume = tulip_resume, +#endif /* CONFIG_PM */ +}; + + +static int __init tulip_init (void) +{ +#ifdef MODULE + pr_info("%s", version); +#endif + + /* copy module parms into globals */ + tulip_rx_copybreak = rx_copybreak; + tulip_max_interrupt_work = max_interrupt_work; + + /* probe for and init boards */ + return pci_register_driver(&tulip_driver); +} + + +static void __exit tulip_cleanup (void) +{ + pci_unregister_driver (&tulip_driver); +} + + +module_init(tulip_init); +module_exit(tulip_cleanup); diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c new file mode 100644 index 00000000000..9e63f406f72 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/uli526x.c @@ -0,0 +1,1850 @@ +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "uli526x" +#define DRV_VERSION "0.9.3" +#define DRV_RELDATE "2005-7-29" + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/dma-mapping.h> +#include <linux/bitops.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> + + +/* Board/System/Debug information/definition ---------------- */ +#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/ +#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/ + +#define ULI526X_IO_SIZE 0x100 +#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */ +#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */ +#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ +#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ +#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) +#define TX_BUF_ALLOC 0x600 +#define RX_ALLOC_SIZE 0x620 +#define ULI526X_RESET 1 +#define CR0_DEFAULT 0 +#define CR6_DEFAULT 0x22200000 +#define CR7_DEFAULT 0x180c1 +#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ +#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ +#define MAX_PACKET_SIZE 1514 +#define ULI5261_MAX_MULTICAST 14 +#define RX_COPY_SIZE 100 +#define MAX_CHECK_PACKET 0x8000 + +#define ULI526X_10MHF 0 +#define ULI526X_100MHF 1 +#define ULI526X_10MFD 4 +#define ULI526X_100MFD 5 +#define ULI526X_AUTO 8 + +#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ +#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ +#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ +#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ +#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ +#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ + +#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ +#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */ +#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */ + +#define ULI526X_DBUG(dbug_now, msg, value) \ +do { \ + if (uli526x_debug || (dbug_now)) \ + pr_err("%s %lx\n", (msg), (long) (value)); \ +} while (0) + +#define SHOW_MEDIA_TYPE(mode) \ + pr_err("Change Speed to %sMhz %s duplex\n", \ + mode & 1 ? "100" : "10", \ + mode & 4 ? "full" : "half"); + + +/* CR9 definition: SROM/MII */ +#define CR9_SROM_READ 0x4800 +#define CR9_SRCS 0x1 +#define CR9_SRCLK 0x2 +#define CR9_CRDOUT 0x8 +#define SROM_DATA_0 0x0 +#define SROM_DATA_1 0x4 +#define PHY_DATA_1 0x20000 +#define PHY_DATA_0 0x00000 +#define MDCLKH 0x10000 + +#define PHY_POWER_DOWN 0x800 + +#define SROM_V41_CODE 0x14 + +#define SROM_CLK_WRITE(data, ioaddr) \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); + +/* Structure/enum declaration ------------------------------- */ +struct tx_desc { + __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ + char *tx_buf_ptr; /* Data for us */ + struct tx_desc *next_tx_desc; +} __attribute__(( aligned(32) )); + +struct rx_desc { + __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ + struct sk_buff *rx_skb_ptr; /* Data for us */ + struct rx_desc *next_rx_desc; +} __attribute__(( aligned(32) )); + +struct uli526x_board_info { + u32 chip_id; /* Chip vendor/Device ID */ + struct net_device *next_dev; /* next device */ + struct pci_dev *pdev; /* PCI device */ + spinlock_t lock; + + long ioaddr; /* I/O base address */ + u32 cr0_data; + u32 cr5_data; + u32 cr6_data; + u32 cr7_data; + u32 cr15_data; + + /* pointer for memory physical address */ + dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ + dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ + dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ + dma_addr_t first_tx_desc_dma; + dma_addr_t first_rx_desc_dma; + + /* descriptor pointer */ + unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ + unsigned char *buf_pool_start; /* Tx buffer pool align dword */ + unsigned char *desc_pool_ptr; /* descriptor pool memory */ + struct tx_desc *first_tx_desc; + struct tx_desc *tx_insert_ptr; + struct tx_desc *tx_remove_ptr; + struct rx_desc *first_rx_desc; + struct rx_desc *rx_insert_ptr; + struct rx_desc *rx_ready_ptr; /* packet come pointer */ + unsigned long tx_packet_cnt; /* transmitted packet count */ + unsigned long rx_avail_cnt; /* available rx descriptor count */ + unsigned long interval_rx_cnt; /* rx packet count a callback time */ + + u16 dbug_cnt; + u16 NIC_capability; /* NIC media capability */ + u16 PHY_reg4; /* Saved Phyxcer register 4 value */ + + u8 media_mode; /* user specify media mode */ + u8 op_mode; /* real work media mode */ + u8 phy_addr; + u8 link_failed; /* Ever link failed */ + u8 wait_reset; /* Hardware failed, need to reset */ + struct timer_list timer; + + /* Driver defined statistic counter */ + unsigned long tx_fifo_underrun; + unsigned long tx_loss_carrier; + unsigned long tx_no_carrier; + unsigned long tx_late_collision; + unsigned long tx_excessive_collision; + unsigned long tx_jabber_timeout; + unsigned long reset_count; + unsigned long reset_cr8; + unsigned long reset_fatal; + unsigned long reset_TXtimeout; + + /* NIC SROM data */ + unsigned char srom[128]; + u8 init; +}; + +enum uli526x_offsets { + DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, + DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, + DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, + DCR15 = 0x78 +}; + +enum uli526x_CR6_bits { + CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, + CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, + CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 +}; + +/* Global variable declaration ----------------------------- */ +static int __devinitdata printed_version; +static const char version[] __devinitconst = + "ULi M5261/M5263 net driver, version " DRV_VERSION " (" DRV_RELDATE ")"; + +static int uli526x_debug; +static unsigned char uli526x_media_mode = ULI526X_AUTO; +static u32 uli526x_cr6_user_set; + +/* For module input parameter */ +static int debug; +static u32 cr6set; +static int mode = 8; + +/* function declaration ------------------------------------- */ +static int uli526x_open(struct net_device *); +static netdev_tx_t uli526x_start_xmit(struct sk_buff *, + struct net_device *); +static int uli526x_stop(struct net_device *); +static void uli526x_set_filter_mode(struct net_device *); +static const struct ethtool_ops netdev_ethtool_ops; +static u16 read_srom_word(long, int); +static irqreturn_t uli526x_interrupt(int, void *); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void uli526x_poll(struct net_device *dev); +#endif +static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); +static void allocate_rx_buffer(struct uli526x_board_info *); +static void update_cr6(u32, unsigned long); +static void send_filter_frame(struct net_device *, int); +static u16 phy_read(unsigned long, u8, u8, u32); +static u16 phy_readby_cr10(unsigned long, u8, u8); +static void phy_write(unsigned long, u8, u8, u16, u32); +static void phy_writeby_cr10(unsigned long, u8, u8, u16); +static void phy_write_1bit(unsigned long, u32, u32); +static u16 phy_read_1bit(unsigned long, u32); +static u8 uli526x_sense_speed(struct uli526x_board_info *); +static void uli526x_process_mode(struct uli526x_board_info *); +static void uli526x_timer(unsigned long); +static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *); +static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *); +static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); +static void uli526x_dynamic_reset(struct net_device *); +static void uli526x_free_rxbuffer(struct uli526x_board_info *); +static void uli526x_init(struct net_device *); +static void uli526x_set_phyxcer(struct uli526x_board_info *); + +/* ULI526X network board routine ---------------------------- */ + +static const struct net_device_ops netdev_ops = { + .ndo_open = uli526x_open, + .ndo_stop = uli526x_stop, + .ndo_start_xmit = uli526x_start_xmit, + .ndo_set_multicast_list = uli526x_set_filter_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = uli526x_poll, +#endif +}; + +/* + * Search ULI526X board, allocate space and register it + */ + +static int __devinit uli526x_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uli526x_board_info *db; /* board information structure */ + struct net_device *dev; + int i, err; + + ULI526X_DBUG(0, "uli526x_init_one()", 0); + + if (!printed_version++) + pr_info("%s\n", version); + + /* Init network device */ + dev = alloc_etherdev(sizeof(*db)); + if (dev == NULL) + return -ENOMEM; + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + pr_warn("32-bit PCI DMA not available\n"); + err = -ENODEV; + goto err_out_free; + } + + /* Enable Master/IO access, Disable memory access */ + err = pci_enable_device(pdev); + if (err) + goto err_out_free; + + if (!pci_resource_start(pdev, 0)) { + pr_err("I/O base is zero\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) { + pr_err("Allocated I/O size too small\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_request_regions(pdev, DRV_NAME)) { + pr_err("Failed to request PCI regions\n"); + err = -ENODEV; + goto err_out_disable; + } + + /* Init system & device */ + db = netdev_priv(dev); + + /* Allocate Tx/Rx descriptor memory */ + db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + if(db->desc_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } + db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + if(db->buf_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } + + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; + db->first_tx_desc_dma = db->desc_pool_dma_ptr; + db->buf_pool_start = db->buf_pool_ptr; + db->buf_pool_dma_start = db->buf_pool_dma_ptr; + + db->chip_id = ent->driver_data; + db->ioaddr = pci_resource_start(pdev, 0); + + db->pdev = pdev; + db->init = 1; + + dev->base_addr = db->ioaddr; + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + + /* Register some necessary functions */ + dev->netdev_ops = &netdev_ops; + dev->ethtool_ops = &netdev_ethtool_ops; + + spin_lock_init(&db->lock); + + + /* read 64 word srom data */ + for (i = 0; i < 64; i++) + ((__le16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); + + /* Set Node address */ + if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */ + { + outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode + outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port + //Read MAC address from CR14 + for (i = 0; i < 6; i++) + dev->dev_addr[i] = inl(db->ioaddr + DCR14); + //Read end + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0, db->ioaddr + DCR0); //Clear CR0 + udelay(10); + } + else /*Exist SROM*/ + { + for (i = 0; i < 6; i++) + dev->dev_addr[i] = db->srom[20 + i]; + } + err = register_netdev (dev); + if (err) + goto err_out_res; + + netdev_info(dev, "ULi M%04lx at pci%s, %pM, irq %d\n", + ent->driver_data >> 16, pci_name(pdev), + dev->dev_addr, dev->irq); + + pci_set_master(pdev); + + return 0; + +err_out_res: + pci_release_regions(pdev); +err_out_nomem: + if(db->desc_pool_ptr) + pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, + db->desc_pool_ptr, db->desc_pool_dma_ptr); + + if(db->buf_pool_ptr != NULL) + pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); +err_out_disable: + pci_disable_device(pdev); +err_out_free: + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + return err; +} + + +static void __devexit uli526x_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_remove_one()", 0); + + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + unregister_netdev(dev); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + pci_set_drvdata(pdev, NULL); + pci_disable_device(pdev); + ULI526X_DBUG(0, "uli526x_remove_one() exit", 0); +} + + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" activates it. + */ + +static int uli526x_open(struct net_device *dev) +{ + int ret; + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_open", 0); + + /* system variable init */ + db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + netif_carrier_off(dev); + db->wait_reset = 0; + + db->NIC_capability = 0xf; /* All capability*/ + db->PHY_reg4 = 0x1e0; + + /* CR6 operation mode decision */ + db->cr6_data |= ULI526X_TXTH_256; + db->cr0_data = CR0_DEFAULT; + + /* Initialize ULI526X board */ + uli526x_init(dev); + + ret = request_irq(dev->irq, uli526x_interrupt, IRQF_SHARED, dev->name, dev); + if (ret) + return ret; + + /* Active System Interface */ + netif_wake_queue(dev); + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = ULI526X_TIMER_WUT + HZ * 2; + db->timer.data = (unsigned long)dev; + db->timer.function = uli526x_timer; + add_timer(&db->timer); + + return 0; +} + + +/* Initialize ULI526X board + * Reset ULI526X board + * Initialize TX/Rx descriptor chain structure + * Send the set-up frame + * Enable Tx/Rx machine + */ + +static void uli526x_init(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = db->ioaddr; + u8 phy_tmp; + u8 timeout; + u16 phy_value; + u16 phy_reg_reset; + + + ULI526X_DBUG(0, "uli526x_init()", 0); + + /* Reset M526x MAC controller */ + outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */ + udelay(100); + outl(db->cr0_data, ioaddr + DCR0); + udelay(5); + + /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ + db->phy_addr = 1; + for(phy_tmp=0;phy_tmp<32;phy_tmp++) + { + phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add + if(phy_value != 0xffff&&phy_value!=0) + { + db->phy_addr = phy_tmp; + break; + } + } + if(phy_tmp == 32) + pr_warn("Can not find the phy address!!!\n"); + /* Parser SROM and media mode */ + db->media_mode = uli526x_media_mode; + + /* phyxcer capability setting */ + phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); + phy_reg_reset = (phy_reg_reset | 0x8000); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); + + /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management + * functions") or phy data sheet for details on phy reset + */ + udelay(500); + timeout = 10; + while (timeout-- && + phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000) + udelay(100); + + /* Process Phyxcer Media Mode */ + uli526x_set_phyxcer(db); + + /* Media Mode Process */ + if ( !(db->media_mode & ULI526X_AUTO) ) + db->op_mode = db->media_mode; /* Force Mode */ + + /* Initialize Transmit/Receive decriptor and CR3/4 */ + uli526x_descriptor_init(db, ioaddr); + + /* Init CR6 to program M526X operation */ + update_cr6(db->cr6_data, ioaddr); + + /* Send setup frame */ + send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */ + + /* Init CR7, interrupt active bit */ + db->cr7_data = CR7_DEFAULT; + outl(db->cr7_data, ioaddr + DCR7); + + /* Init CR15, Tx jabber and Rx watchdog timer */ + outl(db->cr15_data, ioaddr + DCR15); + + /* Enable ULI526X Tx/Rx function */ + db->cr6_data |= CR6_RXSC | CR6_TXSC; + update_cr6(db->cr6_data, ioaddr); +} + + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ + +static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct tx_desc *txptr; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_start_xmit", 0); + + /* Resource flag check */ + netif_stop_queue(dev); + + /* Too large packet check */ + if (skb->len > MAX_PACKET_SIZE) { + netdev_err(dev, "big packet = %d\n", (u16)skb->len); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + spin_lock_irqsave(&db->lock, flags); + + /* No Tx resource check, it never happen nromally */ + if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { + spin_unlock_irqrestore(&db->lock, flags); + netdev_err(dev, "No Tx resource %ld\n", db->tx_packet_cnt); + return NETDEV_TX_BUSY; + } + + /* Disable NIC interrupt */ + outl(0, dev->base_addr + DCR7); + + /* transmit this packet */ + txptr = db->tx_insert_ptr; + skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len); + txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); + + /* Point to next transmit free descriptor */ + db->tx_insert_ptr = txptr->next_tx_desc; + + /* Transmit Packet Process */ + if ( (db->tx_packet_cnt < TX_DESC_CNT) ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } + + /* Tx resource check */ + if ( db->tx_packet_cnt < TX_FREE_DESC_CNT ) + netif_wake_queue(dev); + + /* Restore CR7 to enable interrupt */ + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, dev->base_addr + DCR7); + + /* free this SKB */ + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ + +static int uli526x_stop(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + ULI526X_DBUG(0, "uli526x_stop", 0); + + /* disable system */ + netif_stop_queue(dev); + + /* deleted timer */ + del_timer_sync(&db->timer); + + /* Reset & stop ULI526X board */ + outl(ULI526X_RESET, ioaddr + DCR0); + udelay(5); + phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + + /* free interrupt */ + free_irq(dev->irq, dev); + + /* free allocated rx buffer */ + uli526x_free_rxbuffer(db); + + return 0; +} + + +/* + * M5261/M5263 insterrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +static irqreturn_t uli526x_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + + spin_lock_irqsave(&db->lock, flags); + outl(0, ioaddr + DCR7); + + /* Got ULI526X status */ + db->cr5_data = inl(ioaddr + DCR5); + outl(db->cr5_data, ioaddr + DCR5); + if ( !(db->cr5_data & 0x180c1) ) { + /* Restore CR7 to enable interrupt mask */ + outl(db->cr7_data, ioaddr + DCR7); + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Check system status */ + if (db->cr5_data & 0x2000) { + /* system bus error happen */ + ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data); + db->reset_fatal++; + db->wait_reset = 1; /* Need to RESET */ + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Received the coming packet */ + if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) + uli526x_rx_packet(dev, db); + + /* reallocate rx descriptor buffer */ + if (db->rx_avail_cnt<RX_DESC_CNT) + allocate_rx_buffer(db); + + /* Free the transmitted descriptor */ + if ( db->cr5_data & 0x01) + uli526x_free_tx_pkt(dev, db); + + /* Restore CR7 to enable interrupt mask */ + outl(db->cr7_data, ioaddr + DCR7); + + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void uli526x_poll(struct net_device *dev) +{ + /* ISR grabs the irqsave lock, so this should be safe */ + uli526x_interrupt(dev->irq, dev); +} +#endif + +/* + * Free TX resource after TX complete + */ + +static void uli526x_free_tx_pkt(struct net_device *dev, + struct uli526x_board_info * db) +{ + struct tx_desc *txptr; + u32 tdes0; + + txptr = db->tx_remove_ptr; + while(db->tx_packet_cnt) { + tdes0 = le32_to_cpu(txptr->tdes0); + if (tdes0 & 0x80000000) + break; + + /* A packet sent completed */ + db->tx_packet_cnt--; + dev->stats.tx_packets++; + + /* Transmit statistic counter */ + if ( tdes0 != 0x7fffffff ) { + dev->stats.collisions += (tdes0 >> 3) & 0xf; + dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; + if (tdes0 & TDES0_ERR_MASK) { + dev->stats.tx_errors++; + if (tdes0 & 0x0002) { /* UnderRun */ + db->tx_fifo_underrun++; + if ( !(db->cr6_data & CR6_SFT) ) { + db->cr6_data = db->cr6_data | CR6_SFT; + update_cr6(db->cr6_data, db->ioaddr); + } + } + if (tdes0 & 0x0100) + db->tx_excessive_collision++; + if (tdes0 & 0x0200) + db->tx_late_collision++; + if (tdes0 & 0x0400) + db->tx_no_carrier++; + if (tdes0 & 0x0800) + db->tx_loss_carrier++; + if (tdes0 & 0x4000) + db->tx_jabber_timeout++; + } + } + + txptr = txptr->next_tx_desc; + }/* End of while */ + + /* Update TX remove pointer to next */ + db->tx_remove_ptr = txptr; + + /* Resource available check */ + if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT ) + netif_wake_queue(dev); /* Active upper layer, send again */ +} + + +/* + * Receive the come packet and pass to upper layer + */ + +static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + int rxlen; + u32 rdes0; + + rxptr = db->rx_ready_ptr; + + while(db->rx_avail_cnt) { + rdes0 = le32_to_cpu(rxptr->rdes0); + if (rdes0 & 0x80000000) /* packet owner check */ + { + break; + } + + db->rx_avail_cnt--; + db->interval_rx_cnt++; + + pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); + if ( (rdes0 & 0x300) != 0x300) { + /* A packet without First/Last flag */ + /* reuse this SKB */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + /* A packet with First/Last flag */ + rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; + + /* error summary bit check */ + if (rdes0 & 0x8000) { + /* This is a error packet */ + dev->stats.rx_errors++; + if (rdes0 & 1) + dev->stats.rx_fifo_errors++; + if (rdes0 & 2) + dev->stats.rx_crc_errors++; + if (rdes0 & 0x80) + dev->stats.rx_length_errors++; + } + + if ( !(rdes0 & 0x8000) || + ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { + struct sk_buff *new_skb = NULL; + + skb = rxptr->rx_skb_ptr; + + /* Good packet, send to upper layer */ + /* Shorst packet used new SKB */ + if ((rxlen < RX_COPY_SIZE) && + (((new_skb = dev_alloc_skb(rxlen + 2)) != NULL))) { + skb = new_skb; + /* size less than COPY_SIZE, allocate a rxlen SKB */ + skb_reserve(skb, 2); /* 16byte align */ + memcpy(skb_put(skb, rxlen), + skb_tail_pointer(rxptr->rx_skb_ptr), + rxlen); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else + skb_put(skb, rxlen); + + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += rxlen; + + } else { + /* Reuse SKB buffer when the packet is error */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } + } + + rxptr = rxptr->next_rx_desc; + } + + db->rx_ready_ptr = rxptr; +} + + +/* + * Set ULI526X multicast address + */ + +static void uli526x_set_filter_mode(struct net_device * dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0); + spin_lock_irqsave(&db->lock, flags); + + if (dev->flags & IFF_PROMISC) { + ULI526X_DBUG(0, "Enable PROM Mode", 0); + db->cr6_data |= CR6_PM | CR6_PBF; + update_cr6(db->cr6_data, db->ioaddr); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + if (dev->flags & IFF_ALLMULTI || + netdev_mc_count(dev) > ULI5261_MAX_MULTICAST) { + ULI526X_DBUG(0, "Pass all multicast address", + netdev_mc_count(dev)); + db->cr6_data &= ~(CR6_PM | CR6_PBF); + db->cr6_data |= CR6_PAM; + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev)); + send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */ + spin_unlock_irqrestore(&db->lock, flags); +} + +static void +ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) +{ + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_MII); + + ecmd->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_MII); + + + ecmd->port = PORT_MII; + ecmd->phy_address = db->phy_addr; + + ecmd->transceiver = XCVR_EXTERNAL; + + ethtool_cmd_speed_set(ecmd, SPEED_10); + ecmd->duplex = DUPLEX_HALF; + + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + ethtool_cmd_speed_set(ecmd, SPEED_100); + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + ecmd->duplex = DUPLEX_FULL; + } + if(db->link_failed) + { + ethtool_cmd_speed_set(ecmd, -1); + ecmd->duplex = -1; + } + + if (db->media_mode & ULI526X_AUTO) + { + ecmd->autoneg = AUTONEG_ENABLE; + } +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct uli526x_board_info *np = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + if (np->pdev) + strcpy(info->bus_info, pci_name(np->pdev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { + struct uli526x_board_info *np = netdev_priv(dev); + + ULi_ethtool_gset(np, cmd); + + return 0; +} + +static u32 netdev_get_link(struct net_device *dev) { + struct uli526x_board_info *np = netdev_priv(dev); + + if(np->link_failed) + return 0; + else + return 1; +} + +static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_PHY | WAKE_MAGIC; + wol->wolopts = 0; +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .get_link = netdev_get_link, + .get_wol = uli526x_get_wol, +}; + +/* + * A periodic timer routine + * Dynamic media sense, allocate Rx buffer... + */ + +static void uli526x_timer(unsigned long data) +{ + u32 tmp_cr8; + unsigned char tmp_cr12=0; + struct net_device *dev = (struct net_device *) data; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long flags; + + //ULI526X_DBUG(0, "uli526x_timer()", 0); + spin_lock_irqsave(&db->lock, flags); + + + /* Dynamic reset ULI526X : system error or transmit time-out */ + tmp_cr8 = inl(db->ioaddr + DCR8); + if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { + db->reset_cr8++; + db->wait_reset = 1; + } + db->interval_rx_cnt = 0; + + /* TX polling kick monitor */ + if ( db->tx_packet_cnt && + time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_KICK) ) { + outl(0x1, dev->base_addr + DCR1); // Tx polling again + + // TX Timeout + if ( time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_TIMEOUT) ) { + db->reset_TXtimeout++; + db->wait_reset = 1; + netdev_err(dev, " Tx timeout - resetting\n"); + } + } + + if (db->wait_reset) { + ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); + db->reset_count++; + uli526x_dynamic_reset(dev); + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + /* Link status check, Dynamic media type change */ + if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0) + tmp_cr12 = 3; + + if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { + /* Link Failed */ + ULI526X_DBUG(0, "Link Failed", tmp_cr12); + netif_carrier_off(dev); + netdev_info(dev, "NIC Link is Down\n"); + db->link_failed = 1; + + /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ + /* AUTO don't need */ + if ( !(db->media_mode & 0x8) ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); + + /* AUTO mode, if INT phyxcer link failed, select EXT device */ + if (db->media_mode & ULI526X_AUTO) { + db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ + update_cr6(db->cr6_data, db->ioaddr); + } + } else + if ((tmp_cr12 & 0x3) && db->link_failed) { + ULI526X_DBUG(0, "Link link OK", tmp_cr12); + db->link_failed = 0; + + /* Auto Sense Speed */ + if ( (db->media_mode & ULI526X_AUTO) && + uli526x_sense_speed(db) ) + db->link_failed = 1; + uli526x_process_mode(db); + + if(db->link_failed==0) + { + netdev_info(dev, "NIC Link is Up %d Mbps %s duplex\n", + (db->op_mode == ULI526X_100MHF || + db->op_mode == ULI526X_100MFD) + ? 100 : 10, + (db->op_mode == ULI526X_10MFD || + db->op_mode == ULI526X_100MFD) + ? "Full" : "Half"); + netif_carrier_on(dev); + } + /* SHOW_MEDIA_TYPE(db->op_mode); */ + } + else if(!(tmp_cr12 & 0x3) && db->link_failed) + { + if(db->init==1) + { + netdev_info(dev, "NIC Link is Down\n"); + netif_carrier_off(dev); + } + } + db->init=0; + + /* Timer active again */ + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); +} + + +/* + * Stop ULI526X board + * Free Tx/Rx allocated memory + * Init system variable + */ + +static void uli526x_reset_prepare(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + /* Sopt MAC controller */ + db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ + update_cr6(db->cr6_data, dev->base_addr); + outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ + outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); + + /* Disable upper layer interface */ + netif_stop_queue(dev); + + /* Free Rx Allocate buffer */ + uli526x_free_rxbuffer(db); + + /* system variable init */ + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + db->init=1; + db->wait_reset = 0; +} + + +/* + * Dynamic reset the ULI526X board + * Stop ULI526X board + * Free Tx/Rx allocated memory + * Reset ULI526X board + * Re-initialize ULI526X board + */ + +static void uli526x_dynamic_reset(struct net_device *dev) +{ + ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0); + + uli526x_reset_prepare(dev); + + /* Re-initialize ULI526X board */ + uli526x_init(dev); + + /* Restart upper layer interface */ + netif_wake_queue(dev); +} + + +#ifdef CONFIG_PM + +/* + * Suspend the interface. + */ + +static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + pci_power_t power_state; + int err; + + ULI526X_DBUG(0, "uli526x_suspend", 0); + + if (!netdev_priv(dev)) + return 0; + + pci_save_state(pdev); + + if (!netif_running(dev)) + return 0; + + netif_device_detach(dev); + uli526x_reset_prepare(dev); + + power_state = pci_choose_state(pdev, state); + pci_enable_wake(pdev, power_state, 0); + err = pci_set_power_state(pdev, power_state); + if (err) { + netif_device_attach(dev); + /* Re-initialize ULI526X board */ + uli526x_init(dev); + /* Restart upper layer interface */ + netif_wake_queue(dev); + } + + return err; +} + +/* + * Resume the interface. + */ + +static int uli526x_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + int err; + + ULI526X_DBUG(0, "uli526x_resume", 0); + + if (!netdev_priv(dev)) + return 0; + + pci_restore_state(pdev); + + if (!netif_running(dev)) + return 0; + + err = pci_set_power_state(pdev, PCI_D0); + if (err) { + netdev_warn(dev, "Could not put device into D0\n"); + return err; + } + + netif_device_attach(dev); + /* Re-initialize ULI526X board */ + uli526x_init(dev); + /* Restart upper layer interface */ + netif_wake_queue(dev); + + return 0; +} + +#else /* !CONFIG_PM */ + +#define uli526x_suspend NULL +#define uli526x_resume NULL + +#endif /* !CONFIG_PM */ + + +/* + * free all allocated rx buffer + */ + +static void uli526x_free_rxbuffer(struct uli526x_board_info * db) +{ + ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0); + + /* free allocated rx buffer */ + while (db->rx_avail_cnt) { + dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); + db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; + db->rx_avail_cnt--; + } +} + + +/* + * Reuse the SK buffer + */ + +static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb) +{ + struct rx_desc *rxptr = db->rx_insert_ptr; + + if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { + rxptr->rx_skb_ptr = skb; + rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev, + skb_tail_pointer(skb), + RX_ALLOC_SIZE, + PCI_DMA_FROMDEVICE)); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + db->rx_avail_cnt++; + db->rx_insert_ptr = rxptr->next_rx_desc; + } else + ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); +} + + +/* + * Initialize transmit/Receive descriptor + * Using Chain structure, and allocate Tx/Rx buffer + */ + +static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr) +{ + struct tx_desc *tmp_tx; + struct rx_desc *tmp_rx; + unsigned char *tmp_buf; + dma_addr_t tmp_tx_dma, tmp_rx_dma; + dma_addr_t tmp_buf_dma; + int i; + + ULI526X_DBUG(0, "uli526x_descriptor_init()", 0); + + /* tx descriptor start pointer */ + db->tx_insert_ptr = db->first_tx_desc; + db->tx_remove_ptr = db->first_tx_desc; + outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ + + /* rx descriptor start pointer */ + db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; + db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; + db->rx_insert_ptr = db->first_rx_desc; + db->rx_ready_ptr = db->first_rx_desc; + outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ + + /* Init Transmit chain */ + tmp_buf = db->buf_pool_start; + tmp_buf_dma = db->buf_pool_dma_start; + tmp_tx_dma = db->first_tx_desc_dma; + for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { + tmp_tx->tx_buf_ptr = tmp_buf; + tmp_tx->tdes0 = cpu_to_le32(0); + tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ + tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); + tmp_tx_dma += sizeof(struct tx_desc); + tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); + tmp_tx->next_tx_desc = tmp_tx + 1; + tmp_buf = tmp_buf + TX_BUF_ALLOC; + tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; + } + (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); + tmp_tx->next_tx_desc = db->first_tx_desc; + + /* Init Receive descriptor chain */ + tmp_rx_dma=db->first_rx_desc_dma; + for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { + tmp_rx->rdes0 = cpu_to_le32(0); + tmp_rx->rdes1 = cpu_to_le32(0x01000600); + tmp_rx_dma += sizeof(struct rx_desc); + tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); + tmp_rx->next_rx_desc = tmp_rx + 1; + } + (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); + tmp_rx->next_rx_desc = db->first_rx_desc; + + /* pre-allocate Rx buffer */ + allocate_rx_buffer(db); +} + + +/* + * Update CR6 value + * Firstly stop ULI526X, then written value and start + */ + +static void update_cr6(u32 cr6_data, unsigned long ioaddr) +{ + + outl(cr6_data, ioaddr + DCR6); + udelay(5); +} + + +/* + * Send a setup frame for M5261/M5263 + * This setup frame initialize ULI526X address filter mode + */ + +#ifdef __BIG_ENDIAN +#define FLT_SHIFT 16 +#else +#define FLT_SHIFT 0 +#endif + +static void send_filter_frame(struct net_device *dev, int mc_cnt) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct netdev_hw_addr *ha; + struct tx_desc *txptr; + u16 * addrptr; + u32 * suptr; + int i; + + ULI526X_DBUG(0, "send_filter_frame()", 0); + + txptr = db->tx_insert_ptr; + suptr = (u32 *) txptr->tx_buf_ptr; + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + *suptr++ = addrptr[0] << FLT_SHIFT; + *suptr++ = addrptr[1] << FLT_SHIFT; + *suptr++ = addrptr[2] << FLT_SHIFT; + + /* broadcast address */ + *suptr++ = 0xffff << FLT_SHIFT; + *suptr++ = 0xffff << FLT_SHIFT; + *suptr++ = 0xffff << FLT_SHIFT; + + /* fit the multicast address */ + netdev_for_each_mc_addr(ha, dev) { + addrptr = (u16 *) ha->addr; + *suptr++ = addrptr[0] << FLT_SHIFT; + *suptr++ = addrptr[1] << FLT_SHIFT; + *suptr++ = addrptr[2] << FLT_SHIFT; + } + + for (i = netdev_mc_count(dev); i < 14; i++) { + *suptr++ = 0xffff << FLT_SHIFT; + *suptr++ = 0xffff << FLT_SHIFT; + *suptr++ = 0xffff << FLT_SHIFT; + } + + /* prepare the setup frame */ + db->tx_insert_ptr = txptr->next_tx_desc; + txptr->tdes1 = cpu_to_le32(0x890000c0); + + /* Resource Check and Send the setup packet */ + if (db->tx_packet_cnt < TX_DESC_CNT) { + /* Resource Empty */ + db->tx_packet_cnt++; + txptr->tdes0 = cpu_to_le32(0x80000000); + update_cr6(db->cr6_data | 0x2000, dev->base_addr); + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + update_cr6(db->cr6_data, dev->base_addr); + dev->trans_start = jiffies; + } else + netdev_err(dev, "No Tx resource - Send_filter_frame!\n"); +} + + +/* + * Allocate rx buffer, + * As possible as allocate maxiumn Rx buffer + */ + +static void allocate_rx_buffer(struct uli526x_board_info *db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + + rxptr = db->rx_insert_ptr; + + while(db->rx_avail_cnt < RX_DESC_CNT) { + if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) + break; + rxptr->rx_skb_ptr = skb; /* FIXME (?) */ + rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev, + skb_tail_pointer(skb), + RX_ALLOC_SIZE, + PCI_DMA_FROMDEVICE)); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + rxptr = rxptr->next_rx_desc; + db->rx_avail_cnt++; + } + + db->rx_insert_ptr = rxptr; +} + + +/* + * Read one word data from the serial ROM + */ + +static u16 read_srom_word(long ioaddr, int offset) +{ + int i; + u16 srom_data = 0; + long cr9_ioaddr = ioaddr + DCR9; + + outl(CR9_SROM_READ, cr9_ioaddr); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + /* Send the Read Command 110b */ + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); + + /* Send the offset */ + for (i = 5; i >= 0; i--) { + srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; + SROM_CLK_WRITE(srom_data, cr9_ioaddr); + } + + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + for (i = 16; i > 0; i--) { + outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); + udelay(5); + srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + udelay(5); + } + + outl(CR9_SROM_READ, cr9_ioaddr); + return srom_data; +} + + +/* + * Auto sense the media mode + */ + +static u8 uli526x_sense_speed(struct uli526x_board_info * db) +{ + u8 ErrFlag = 0; + u16 phy_mode; + + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + + if ( (phy_mode & 0x24) == 0x24 ) { + + phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7); + if(phy_mode&0x8000) + phy_mode = 0x8000; + else if(phy_mode&0x4000) + phy_mode = 0x4000; + else if(phy_mode&0x2000) + phy_mode = 0x2000; + else + phy_mode = 0x1000; + + switch (phy_mode) { + case 0x1000: db->op_mode = ULI526X_10MHF; break; + case 0x2000: db->op_mode = ULI526X_10MFD; break; + case 0x4000: db->op_mode = ULI526X_100MHF; break; + case 0x8000: db->op_mode = ULI526X_100MFD; break; + default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break; + } + } else { + db->op_mode = ULI526X_10MHF; + ULI526X_DBUG(0, "Link Failed :", phy_mode); + ErrFlag = 1; + } + + return ErrFlag; +} + + +/* + * Set 10/100 phyxcer capability + * AUTO mode : phyxcer register4 is NIC capability + * Force mode: phyxcer register4 is the force media + */ + +static void uli526x_set_phyxcer(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Phyxcer capability setting */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + + if (db->media_mode & ULI526X_AUTO) { + /* AUTO Mode */ + phy_reg |= db->PHY_reg4; + } else { + /* Force Mode */ + switch(db->media_mode) { + case ULI526X_10MHF: phy_reg |= 0x20; break; + case ULI526X_10MFD: phy_reg |= 0x40; break; + case ULI526X_100MHF: phy_reg |= 0x80; break; + case ULI526X_100MFD: phy_reg |= 0x100; break; + } + + } + + /* Write new capability to Phyxcer Reg4 */ + if ( !(phy_reg & 0x01e0)) { + phy_reg|=db->PHY_reg4; + db->media_mode|=ULI526X_AUTO; + } + phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + + /* Restart Auto-Negotiation */ + phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); + udelay(50); +} + + +/* + * Process op-mode + AUTO mode : PHY controller in Auto-negotiation Mode + * Force mode: PHY controller in force mode with HUB + * N-way force capability with SWITCH + */ + +static void uli526x_process_mode(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Full Duplex Mode Check */ + if (db->op_mode & 0x4) + db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ + else + db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ + + update_cr6(db->cr6_data, db->ioaddr); + + /* 10/100M phyxcer force mode need */ + if ( !(db->media_mode & 0x8)) { + /* Forece Mode */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); + if ( !(phy_reg & 0x1) ) { + /* parter without N-Way capability */ + phy_reg = 0x0; + switch(db->op_mode) { + case ULI526X_10MHF: phy_reg = 0x0; break; + case ULI526X_10MFD: phy_reg = 0x100; break; + case ULI526X_100MHF: phy_reg = 0x2000; break; + case ULI526X_100MFD: phy_reg = 0x2100; break; + } + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + } + } +} + + +/* + * Write a word to Phy register + */ + +static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) +{ + u16 i; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + { + phy_writeby_cr10(iobase, phy_addr, offset, phy_data); + return; + } + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send write command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* written trasnition */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Write a word data to PHY controller */ + for ( i = 0x8000; i > 0; i >>= 1) + phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + +} + + +/* + * Read a word data from phy register + */ + +static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +{ + int i; + u16 phy_data; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + return phy_readby_cr10(iobase, phy_addr, offset); + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send read command(10) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Skip transition state */ + phy_read_1bit(ioaddr, chip_id); + + /* read 16bit data */ + for (phy_data = 0, i = 0; i < 16; i++) { + phy_data <<= 1; + phy_data |= phy_read_1bit(ioaddr, chip_id); + } + + return phy_data; +} + +static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x08000000; + outl(cr10_value,ioaddr); + udelay(1); + while(1) + { + cr10_value = inl(ioaddr); + if(cr10_value&0x10000000) + break; + } + return cr10_value & 0x0ffff; +} + +static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x04000000 + phy_data; + outl(cr10_value,ioaddr); + udelay(1); +} +/* + * Write one bit data to Phy Controller + */ + +static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id) +{ + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); + outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ + udelay(1); + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); +} + + +/* + * Read one bit phy data from PHY controller + */ + +static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id) +{ + u16 phy_data; + + outl(0x50000 , ioaddr); + udelay(1); + phy_data = ( inl(ioaddr) >> 19 ) & 0x1; + outl(0x40000 , ioaddr); + udelay(1); + + return phy_data; +} + + +static DEFINE_PCI_DEVICE_TABLE(uli526x_pci_tbl) = { + { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID }, + { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl); + + +static struct pci_driver uli526x_driver = { + .name = "uli526x", + .id_table = uli526x_pci_tbl, + .probe = uli526x_init_one, + .remove = __devexit_p(uli526x_remove_one), + .suspend = uli526x_suspend, + .resume = uli526x_resume, +}; + +MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw"); +MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver"); +MODULE_LICENSE("GPL"); + +module_param(debug, int, 0644); +module_param(mode, int, 0); +module_param(cr6set, int, 0); +MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)"); +MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); + +/* Description: + * when user used insmod to add module, system invoked init_module() + * to register the services. + */ + +static int __init uli526x_init_module(void) +{ + + pr_info("%s\n", version); + printed_version = 1; + + ULI526X_DBUG(0, "init_module() ", debug); + + if (debug) + uli526x_debug = debug; /* set debug flag */ + if (cr6set) + uli526x_cr6_user_set = cr6set; + + switch (mode) { + case ULI526X_10MHF: + case ULI526X_100MHF: + case ULI526X_10MFD: + case ULI526X_100MFD: + uli526x_media_mode = mode; + break; + default: + uli526x_media_mode = ULI526X_AUTO; + break; + } + + return pci_register_driver(&uli526x_driver); +} + + +/* + * Description: + * when user used rmmod to delete module, system invoked clean_module() + * to un-register all registered services. + */ + +static void __exit uli526x_cleanup_module(void) +{ + ULI526X_DBUG(0, "uli526x_clean_module() ", debug); + pci_unregister_driver(&uli526x_driver); +} + +module_init(uli526x_init_module); +module_exit(uli526x_cleanup_module); diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c new file mode 100644 index 00000000000..862eadf0719 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/winbond-840.c @@ -0,0 +1,1670 @@ +/* winbond-840.c: A Linux PCI network adapter device driver. */ +/* + Written 1998-2001 by Donald Becker. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Support and updates available at + http://www.scyld.com/network/drivers.html + + Do not remove the copyright information. + Do not change the version information unless an improvement has been made. + Merely removing my name, as Compex has done in the past, does not count + as an improvement. + + Changelog: + * ported to 2.4 + ??? + * spin lock update, memory barriers, new style dma mappings + limit each tx buffer to < 1024 bytes + remove DescIntr from Rx descriptors (that's an Tx flag) + remove next pointer from Tx descriptors + synchronize tx_q_bytes + software reset in tx_timeout + Copyright (C) 2000 Manfred Spraul + * further cleanups + power management. + support for big endian descriptors + Copyright (C) 2001 Manfred Spraul + * ethtool support (jgarzik) + * Replace some MII-related magic numbers with constants (jgarzik) + + TODO: + * enable pci_power_off + * Wake-On-LAN +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "winbond-840" +#define DRV_VERSION "1.01-e" +#define DRV_RELDATE "Sep-11-2006" + + +/* Automatically extracted configuration info: +probe-func: winbond840_probe +config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840 + +c-help-name: Winbond W89c840 PCI Ethernet support +c-help-symbol: CONFIG_WINBOND_840 +c-help: This driver is for the Winbond W89c840 chip. It also works with +c-help: the TX9882 chip on the Compex RL100-ATX board. +c-help: More specific information and updates are available from +c-help: http://www.scyld.com/network/drivers.html +*/ + +/* The user-configurable values. + These may be modified when a driver module is loaded.*/ + +static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ +static int max_interrupt_work = 20; +/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + The '840 uses a 64 element hash table based on the Ethernet CRC. */ +static int multicast_filter_limit = 32; + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1518 effectively disables this feature. */ +static int rx_copybreak; + +/* Used to pass the media type, etc. + Both 'options[]' and 'full_duplex[]' should exist for driver + interoperability. + The media type is usually passed in 'options[]'. +*/ +#define MAX_UNITS 8 /* More are supported, limit only on options */ +static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; +static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + The compiler will convert <unsigned>'%'<2^N> into a bit mask. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + There are no ill effects from too-large receive rings. */ +#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#define TX_QUEUE_LEN_RESTART 5 + +#define TX_BUFLIMIT (1024-128) + +/* The presumed FIFO size for working around the Tx-FIFO-overflow bug. + To avoid overflowing we don't queue again until we have room for a + full-size packet. + */ +#define TX_FIFO_SIZE (2048) +#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16) + + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2*HZ) + +/* Include files, designed to support most kernel versions 2.0.0 and later. */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/rtnetlink.h> +#include <linux/crc32.h> +#include <linux/bitops.h> +#include <asm/uaccess.h> +#include <asm/processor.h> /* Processor type for cache alignment. */ +#include <asm/io.h> +#include <asm/irq.h> + +#include "tulip.h" + +#undef PKT_BUF_SZ /* tulip.h also defines this */ +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ + +/* These identify the driver base version and may not be removed. */ +static const char version[] __initconst = + "v" DRV_VERSION " (2.4 port) " + DRV_RELDATE " Donald Becker <becker@scyld.com>\n" + " http://www.scyld.com/network/drivers.html\n"; + +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_param(max_interrupt_work, int, 0); +module_param(debug, int, 0); +module_param(rx_copybreak, int, 0); +module_param(multicast_filter_limit, int, 0); +module_param_array(options, int, NULL, 0); +module_param_array(full_duplex, int, NULL, 0); +MODULE_PARM_DESC(max_interrupt_work, "winbond-840 maximum events handled per interrupt"); +MODULE_PARM_DESC(debug, "winbond-840 debug level (0-6)"); +MODULE_PARM_DESC(rx_copybreak, "winbond-840 copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(multicast_filter_limit, "winbond-840 maximum number of filtered multicast addresses"); +MODULE_PARM_DESC(options, "winbond-840: Bits 0-3: media type, bit 17: full duplex"); +MODULE_PARM_DESC(full_duplex, "winbond-840 full duplex setting(s) (1)"); + +/* + Theory of Operation + +I. Board Compatibility + +This driver is for the Winbond w89c840 chip. + +II. Board-specific settings + +None. + +III. Driver operation + +This chip is very similar to the Digital 21*4* "Tulip" family. The first +twelve registers and the descriptor format are nearly identical. Read a +Tulip manual for operational details. + +A significant difference is that the multicast filter and station address are +stored in registers rather than loaded through a pseudo-transmit packet. + +Unlike the Tulip, transmit buffers are limited to 1KB. To transmit a +full-sized packet we must use both data buffers in a descriptor. Thus the +driver uses ring mode where descriptors are implicitly sequential in memory, +rather than using the second descriptor address as a chain pointer to +subsequent descriptors. + +IV. Notes + +If you are going to almost clone a Tulip, why not go all the way and avoid +the need for a new driver? + +IVb. References + +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html +http://www.winbond.com.tw/ + +IVc. Errata + +A horrible bug exists in the transmit FIFO. Apparently the chip doesn't +correctly detect a full FIFO, and queuing more than 2048 bytes may result in +silent data corruption. + +Test with 'ping -s 10000' on a fast computer. + +*/ + + + +/* + PCI probe table. +*/ +enum chip_capability_flags { + CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8, +}; + +static DEFINE_PCI_DEVICE_TABLE(w840_pci_tbl) = { + { 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 }, + { 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { } +}; +MODULE_DEVICE_TABLE(pci, w840_pci_tbl); + +enum { + netdev_res_size = 128, /* size of PCI BAR resource */ +}; + +struct pci_id_info { + const char *name; + int drv_flags; /* Driver use, intended as capability flags. */ +}; + +static const struct pci_id_info pci_id_tbl[] __devinitdata = { + { /* Sometime a Level-One switch card. */ + "Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII}, + { "Winbond W89c840", CanHaveMII | HasBrokenTx}, + { "Compex RL100-ATX", CanHaveMII | HasBrokenTx}, + { } /* terminate list. */ +}; + +/* This driver was written to use PCI memory space, however some x86 systems + work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config +*/ + +/* Offsets to the Command and Status Registers, "CSRs". + While similar to the Tulip, these registers are longword aligned. + Note: It's not useful to define symbolic names for every register bit in + the device. The name can only partially document the semantics and make + the driver longer and more difficult to read. +*/ +enum w840_offsets { + PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08, + RxRingPtr=0x0C, TxRingPtr=0x10, + IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C, + RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C, + CurRxDescAddr=0x30, CurRxBufAddr=0x34, /* Debug use */ + MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40, + CurTxDescAddr=0x4C, CurTxBufAddr=0x50, +}; + +/* Bits in the NetworkConfig register. */ +enum rx_mode_bits { + AcceptErr=0x80, + RxAcceptBroadcast=0x20, AcceptMulticast=0x10, + RxAcceptAllPhys=0x08, AcceptMyPhys=0x02, +}; + +enum mii_reg_bits { + MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000, + MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000, +}; + +/* The Tulip Rx and Tx buffer descriptors. */ +struct w840_rx_desc { + s32 status; + s32 length; + u32 buffer1; + u32 buffer2; +}; + +struct w840_tx_desc { + s32 status; + s32 length; + u32 buffer1, buffer2; +}; + +#define MII_CNT 1 /* winbond only supports one MII */ +struct netdev_private { + struct w840_rx_desc *rx_ring; + dma_addr_t rx_addr[RX_RING_SIZE]; + struct w840_tx_desc *tx_ring; + dma_addr_t tx_addr[TX_RING_SIZE]; + dma_addr_t ring_dma_addr; + /* The addresses of receive-in-place skbuffs. */ + struct sk_buff* rx_skbuff[RX_RING_SIZE]; + /* The saved address of a sent-in-place packet/buffer, for later free(). */ + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + struct net_device_stats stats; + struct timer_list timer; /* Media monitoring timer. */ + /* Frequently used values: keep some adjacent for cache effect. */ + spinlock_t lock; + int chip_id, drv_flags; + struct pci_dev *pci_dev; + int csr6; + struct w840_rx_desc *rx_head_desc; + unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + unsigned int cur_tx, dirty_tx; + unsigned int tx_q_bytes; + unsigned int tx_full; /* The Tx queue is full. */ + /* MII transceiver section. */ + int mii_cnt; /* MII device addresses. */ + unsigned char phys[MII_CNT]; /* MII device addresses, but only the first is used */ + u32 mii; + struct mii_if_info mii_if; + void __iomem *base_addr; +}; + +static int eeprom_read(void __iomem *ioaddr, int location); +static int mdio_read(struct net_device *dev, int phy_id, int location); +static void mdio_write(struct net_device *dev, int phy_id, int location, int value); +static int netdev_open(struct net_device *dev); +static int update_link(struct net_device *dev); +static void netdev_timer(unsigned long data); +static void init_rxtx_rings(struct net_device *dev); +static void free_rxtx_rings(struct netdev_private *np); +static void init_registers(struct net_device *dev); +static void tx_timeout(struct net_device *dev); +static int alloc_ringdesc(struct net_device *dev); +static void free_ringdesc(struct netdev_private *np); +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t intr_handler(int irq, void *dev_instance); +static void netdev_error(struct net_device *dev, int intr_status); +static int netdev_rx(struct net_device *dev); +static u32 __set_rx_mode(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static struct net_device_stats *get_stats(struct net_device *dev); +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static const struct ethtool_ops netdev_ethtool_ops; +static int netdev_close(struct net_device *dev); + +static const struct net_device_ops netdev_ops = { + .ndo_open = netdev_open, + .ndo_stop = netdev_close, + .ndo_start_xmit = start_tx, + .ndo_get_stats = get_stats, + .ndo_set_multicast_list = set_rx_mode, + .ndo_do_ioctl = netdev_ioctl, + .ndo_tx_timeout = tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int __devinit w840_probe1 (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + struct netdev_private *np; + static int find_cnt; + int chip_idx = ent->driver_data; + int irq; + int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; + void __iomem *ioaddr; + + i = pci_enable_device(pdev); + if (i) return i; + + pci_set_master(pdev); + + irq = pdev->irq; + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + pr_warn("Device %s disabled due to DMA limitations\n", + pci_name(pdev)); + return -EIO; + } + dev = alloc_etherdev(sizeof(*np)); + if (!dev) + return -ENOMEM; + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_request_regions(pdev, DRV_NAME)) + goto err_out_netdev; + + ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size); + if (!ioaddr) + goto err_out_free_res; + + for (i = 0; i < 3; i++) + ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(eeprom_read(ioaddr, i)); + + /* Reset the chip to erase previous misconfiguration. + No hold time required! */ + iowrite32(0x00000001, ioaddr + PCIBusCfg); + + dev->base_addr = (unsigned long)ioaddr; + dev->irq = irq; + + np = netdev_priv(dev); + np->pci_dev = pdev; + np->chip_id = chip_idx; + np->drv_flags = pci_id_tbl[chip_idx].drv_flags; + spin_lock_init(&np->lock); + np->mii_if.dev = dev; + np->mii_if.mdio_read = mdio_read; + np->mii_if.mdio_write = mdio_write; + np->base_addr = ioaddr; + + pci_set_drvdata(pdev, dev); + + if (dev->mem_start) + option = dev->mem_start; + + /* The lower four bits are the media type. */ + if (option > 0) { + if (option & 0x200) + np->mii_if.full_duplex = 1; + if (option & 15) + dev_info(&dev->dev, + "ignoring user supplied media type %d", + option & 15); + } + if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0) + np->mii_if.full_duplex = 1; + + if (np->mii_if.full_duplex) + np->mii_if.force_media = 1; + + /* The chip-specific entries in the device structure. */ + dev->netdev_ops = &netdev_ops; + dev->ethtool_ops = &netdev_ethtool_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + i = register_netdev(dev); + if (i) + goto err_out_cleardev; + + dev_info(&dev->dev, "%s at %p, %pM, IRQ %d\n", + pci_id_tbl[chip_idx].name, ioaddr, dev->dev_addr, irq); + + if (np->drv_flags & CanHaveMII) { + int phy, phy_idx = 0; + for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { + int mii_status = mdio_read(dev, phy, MII_BMSR); + if (mii_status != 0xffff && mii_status != 0x0000) { + np->phys[phy_idx++] = phy; + np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); + np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+ + mdio_read(dev, phy, MII_PHYSID2); + dev_info(&dev->dev, + "MII PHY %08xh found at address %d, status 0x%04x advertising %04x\n", + np->mii, phy, mii_status, + np->mii_if.advertising); + } + } + np->mii_cnt = phy_idx; + np->mii_if.phy_id = np->phys[0]; + if (phy_idx == 0) { + dev_warn(&dev->dev, + "MII PHY not found -- this device may not operate correctly\n"); + } + } + + find_cnt++; + return 0; + +err_out_cleardev: + pci_set_drvdata(pdev, NULL); + pci_iounmap(pdev, ioaddr); +err_out_free_res: + pci_release_regions(pdev); +err_out_netdev: + free_netdev (dev); + return -ENODEV; +} + + +/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are + often serial bit streams generated by the host processor. + The example below is for the common 93c46 EEPROM, 64 16 bit words. */ + +/* Delay between EEPROM clock transitions. + No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need + a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that + made udelay() unreliable. + The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is + deprecated. +*/ +#define eeprom_delay(ee_addr) ioread32(ee_addr) + +enum EEPROM_Ctrl_Bits { + EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805, + EE_ChipSelect=0x801, EE_DataIn=0x08, +}; + +/* The EEPROM commands include the alway-set leading bit. */ +enum EEPROM_Cmds { + EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), +}; + +static int eeprom_read(void __iomem *addr, int location) +{ + int i; + int retval = 0; + void __iomem *ee_addr = addr + EECtrl; + int read_cmd = location | EE_ReadCmd; + iowrite32(EE_ChipSelect, ee_addr); + + /* Shift the read command bits out. */ + for (i = 10; i >= 0; i--) { + short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; + iowrite32(dataval, ee_addr); + eeprom_delay(ee_addr); + iowrite32(dataval | EE_ShiftClk, ee_addr); + eeprom_delay(ee_addr); + } + iowrite32(EE_ChipSelect, ee_addr); + eeprom_delay(ee_addr); + + for (i = 16; i > 0; i--) { + iowrite32(EE_ChipSelect | EE_ShiftClk, ee_addr); + eeprom_delay(ee_addr); + retval = (retval << 1) | ((ioread32(ee_addr) & EE_DataIn) ? 1 : 0); + iowrite32(EE_ChipSelect, ee_addr); + eeprom_delay(ee_addr); + } + + /* Terminate the EEPROM access. */ + iowrite32(0, ee_addr); + return retval; +} + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. See the MII specifications or DP83840A data sheet + for details. + + The maximum data clock rate is 2.5 Mhz. The minimum timing is usually + met by back-to-back 33Mhz PCI cycles. */ +#define mdio_delay(mdio_addr) ioread32(mdio_addr) + +/* Set iff a MII transceiver on any interface requires mdio preamble. + This only set with older transceivers, so the extra + code size of a per-interface flag is not worthwhile. */ +static char mii_preamble_required = 1; + +#define MDIO_WRITE0 (MDIO_EnbOutput) +#define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput) + +/* Generate the preamble required for initial synchronization and + a few older transceivers. */ +static void mdio_sync(void __iomem *mdio_addr) +{ + int bits = 32; + + /* Establish sync by sending at least 32 logic ones. */ + while (--bits >= 0) { + iowrite32(MDIO_WRITE1, mdio_addr); + mdio_delay(mdio_addr); + iowrite32(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } +} + +static int mdio_read(struct net_device *dev, int phy_id, int location) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *mdio_addr = np->base_addr + MIICtrl; + int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; + int i, retval = 0; + + if (mii_preamble_required) + mdio_sync(mdio_addr); + + /* Shift the read command bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + + iowrite32(dataval, mdio_addr); + mdio_delay(mdio_addr); + iowrite32(dataval | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 20; i > 0; i--) { + iowrite32(MDIO_EnbIn, mdio_addr); + mdio_delay(mdio_addr); + retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DataIn) ? 1 : 0); + iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + return (retval>>1) & 0xffff; +} + +static void mdio_write(struct net_device *dev, int phy_id, int location, int value) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *mdio_addr = np->base_addr + MIICtrl; + int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; + int i; + + if (location == 4 && phy_id == np->phys[0]) + np->mii_if.advertising = value; + + if (mii_preamble_required) + mdio_sync(mdio_addr); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + + iowrite32(dataval, mdio_addr); + mdio_delay(mdio_addr); + iowrite32(dataval | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + iowrite32(MDIO_EnbIn, mdio_addr); + mdio_delay(mdio_addr); + iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); + mdio_delay(mdio_addr); + } +} + + +static int netdev_open(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + int i; + + iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */ + + netif_device_detach(dev); + i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev); + if (i) + goto out_err; + + if (debug > 1) + netdev_dbg(dev, "w89c840_open() irq %d\n", dev->irq); + + if((i=alloc_ringdesc(dev))) + goto out_err; + + spin_lock_irq(&np->lock); + netif_device_attach(dev); + init_registers(dev); + spin_unlock_irq(&np->lock); + + netif_start_queue(dev); + if (debug > 2) + netdev_dbg(dev, "Done netdev_open()\n"); + + /* Set the timer to check for link beat. */ + init_timer(&np->timer); + np->timer.expires = jiffies + 1*HZ; + np->timer.data = (unsigned long)dev; + np->timer.function = netdev_timer; /* timer handler */ + add_timer(&np->timer); + return 0; +out_err: + netif_device_attach(dev); + return i; +} + +#define MII_DAVICOM_DM9101 0x0181b800 + +static int update_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int duplex, fasteth, result, mii_reg; + + /* BSMR */ + mii_reg = mdio_read(dev, np->phys[0], MII_BMSR); + + if (mii_reg == 0xffff) + return np->csr6; + /* reread: the link status bit is sticky */ + mii_reg = mdio_read(dev, np->phys[0], MII_BMSR); + if (!(mii_reg & 0x4)) { + if (netif_carrier_ok(dev)) { + if (debug) + dev_info(&dev->dev, + "MII #%d reports no link. Disabling watchdog\n", + np->phys[0]); + netif_carrier_off(dev); + } + return np->csr6; + } + if (!netif_carrier_ok(dev)) { + if (debug) + dev_info(&dev->dev, + "MII #%d link is back. Enabling watchdog\n", + np->phys[0]); + netif_carrier_on(dev); + } + + if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) { + /* If the link partner doesn't support autonegotiation + * the MII detects it's abilities with the "parallel detection". + * Some MIIs update the LPA register to the result of the parallel + * detection, some don't. + * The Davicom PHY [at least 0181b800] doesn't. + * Instead bit 9 and 13 of the BMCR are updated to the result + * of the negotiation.. + */ + mii_reg = mdio_read(dev, np->phys[0], MII_BMCR); + duplex = mii_reg & BMCR_FULLDPLX; + fasteth = mii_reg & BMCR_SPEED100; + } else { + int negotiated; + mii_reg = mdio_read(dev, np->phys[0], MII_LPA); + negotiated = mii_reg & np->mii_if.advertising; + + duplex = (negotiated & LPA_100FULL) || ((negotiated & 0x02C0) == LPA_10FULL); + fasteth = negotiated & 0x380; + } + duplex |= np->mii_if.force_media; + /* remove fastether and fullduplex */ + result = np->csr6 & ~0x20000200; + if (duplex) + result |= 0x200; + if (fasteth) + result |= 0x20000000; + if (result != np->csr6 && debug) + dev_info(&dev->dev, + "Setting %dMBit-%s-duplex based on MII#%d\n", + fasteth ? 100 : 10, duplex ? "full" : "half", + np->phys[0]); + return result; +} + +#define RXTX_TIMEOUT 2000 +static inline void update_csr6(struct net_device *dev, int new) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + int limit = RXTX_TIMEOUT; + + if (!netif_device_present(dev)) + new = 0; + if (new==np->csr6) + return; + /* stop both Tx and Rx processes */ + iowrite32(np->csr6 & ~0x2002, ioaddr + NetworkConfig); + /* wait until they have really stopped */ + for (;;) { + int csr5 = ioread32(ioaddr + IntrStatus); + int t; + + t = (csr5 >> 17) & 0x07; + if (t==0||t==1) { + /* rx stopped */ + t = (csr5 >> 20) & 0x07; + if (t==0||t==1) + break; + } + + limit--; + if(!limit) { + dev_info(&dev->dev, + "couldn't stop rxtx, IntrStatus %xh\n", csr5); + break; + } + udelay(1); + } + np->csr6 = new; + /* and restart them with the new configuration */ + iowrite32(np->csr6, ioaddr + NetworkConfig); + if (new & 0x200) + np->mii_if.full_duplex = 1; +} + +static void netdev_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + if (debug > 2) + netdev_dbg(dev, "Media selection timer tick, status %08x config %08x\n", + ioread32(ioaddr + IntrStatus), + ioread32(ioaddr + NetworkConfig)); + spin_lock_irq(&np->lock); + update_csr6(dev, update_link(dev)); + spin_unlock_irq(&np->lock); + np->timer.expires = jiffies + 10*HZ; + add_timer(&np->timer); +} + +static void init_rxtx_rings(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + np->rx_head_desc = &np->rx_ring[0]; + np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE]; + + /* Initial all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].length = np->rx_buf_sz; + np->rx_ring[i].status = 0; + np->rx_skbuff[i] = NULL; + } + /* Mark the last entry as wrapping the ring. */ + np->rx_ring[i-1].length |= DescEndRing; + + /* Fill in the Rx buffers. Handle allocation failure gracefully. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[i] = skb; + if (skb == NULL) + break; + np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data, + np->rx_buf_sz,PCI_DMA_FROMDEVICE); + + np->rx_ring[i].buffer1 = np->rx_addr[i]; + np->rx_ring[i].status = DescOwned; + } + + np->cur_rx = 0; + np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + /* Initialize the Tx descriptors */ + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = NULL; + np->tx_ring[i].status = 0; + } + np->tx_full = 0; + np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0; + + iowrite32(np->ring_dma_addr, np->base_addr + RxRingPtr); + iowrite32(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE, + np->base_addr + TxRingPtr); + +} + +static void free_rxtx_rings(struct netdev_private* np) +{ + int i; + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].status = 0; + if (np->rx_skbuff[i]) { + pci_unmap_single(np->pci_dev, + np->rx_addr[i], + np->rx_skbuff[i]->len, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(np->rx_skbuff[i]); + } + np->rx_skbuff[i] = NULL; + } + for (i = 0; i < TX_RING_SIZE; i++) { + if (np->tx_skbuff[i]) { + pci_unmap_single(np->pci_dev, + np->tx_addr[i], + np->tx_skbuff[i]->len, + PCI_DMA_TODEVICE); + dev_kfree_skb(np->tx_skbuff[i]); + } + np->tx_skbuff[i] = NULL; + } +} + +static void init_registers(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + int i; + + for (i = 0; i < 6; i++) + iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i); + + /* Initialize other registers. */ +#ifdef __BIG_ENDIAN + i = (1<<20); /* Big-endian descriptors */ +#else + i = 0; +#endif + i |= (0x04<<2); /* skip length 4 u32 */ + i |= 0x02; /* give Rx priority */ + + /* Configure the PCI bus bursts and FIFO thresholds. + 486: Set 8 longword cache alignment, 8 longword burst. + 586: Set 16 longword cache alignment, no burst limit. + Cache alignment bits 15:14 Burst length 13:8 + 0000 <not allowed> 0000 align to cache 0800 8 longwords + 4000 8 longwords 0100 1 longword 1000 16 longwords + 8000 16 longwords 0200 2 longwords 2000 32 longwords + C000 32 longwords 0400 4 longwords */ + +#if defined (__i386__) && !defined(MODULE) + /* When not a module we can work around broken '486 PCI boards. */ + if (boot_cpu_data.x86 <= 4) { + i |= 0x4800; + dev_info(&dev->dev, + "This is a 386/486 PCI system, setting cache alignment to 8 longwords\n"); + } else { + i |= 0xE000; + } +#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) + i |= 0xE000; +#elif defined(CONFIG_SPARC) || defined (CONFIG_PARISC) + i |= 0x4800; +#else +#warning Processor architecture undefined + i |= 0x4800; +#endif + iowrite32(i, ioaddr + PCIBusCfg); + + np->csr6 = 0; + /* 128 byte Tx threshold; + Transmit on; Receive on; */ + update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev)); + + /* Clear and Enable interrupts by setting the interrupt mask. */ + iowrite32(0x1A0F5, ioaddr + IntrStatus); + iowrite32(0x1A0F5, ioaddr + IntrEnable); + + iowrite32(0, ioaddr + RxStartDemand); +} + +static void tx_timeout(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + dev_warn(&dev->dev, "Transmit timed out, status %08x, resetting...\n", + ioread32(ioaddr + IntrStatus)); + + { + int i; + printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) + printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) + printk(KERN_CONT " %08x", np->tx_ring[i].status); + printk(KERN_CONT "\n"); + } + printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n", + np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes); + printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C)); + + disable_irq(dev->irq); + spin_lock_irq(&np->lock); + /* + * Under high load dirty_tx and the internal tx descriptor pointer + * come out of sync, thus perform a software reset and reinitialize + * everything. + */ + + iowrite32(1, np->base_addr+PCIBusCfg); + udelay(1); + + free_rxtx_rings(np); + init_rxtx_rings(dev); + init_registers(dev); + spin_unlock_irq(&np->lock); + enable_irq(dev->irq); + + netif_wake_queue(dev); + dev->trans_start = jiffies; /* prevent tx timeout */ + np->stats.tx_errors++; +} + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static int alloc_ringdesc(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + + np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); + + np->rx_ring = pci_alloc_consistent(np->pci_dev, + sizeof(struct w840_rx_desc)*RX_RING_SIZE + + sizeof(struct w840_tx_desc)*TX_RING_SIZE, + &np->ring_dma_addr); + if(!np->rx_ring) + return -ENOMEM; + init_rxtx_rings(dev); + return 0; +} + +static void free_ringdesc(struct netdev_private *np) +{ + pci_free_consistent(np->pci_dev, + sizeof(struct w840_rx_desc)*RX_RING_SIZE + + sizeof(struct w840_tx_desc)*TX_RING_SIZE, + np->rx_ring, np->ring_dma_addr); + +} + +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + unsigned entry; + + /* Caution: the write order is important here, set the field + with the "ownership" bits last. */ + + /* Calculate the next Tx descriptor entry. */ + entry = np->cur_tx % TX_RING_SIZE; + + np->tx_addr[entry] = pci_map_single(np->pci_dev, + skb->data,skb->len, PCI_DMA_TODEVICE); + np->tx_skbuff[entry] = skb; + + np->tx_ring[entry].buffer1 = np->tx_addr[entry]; + if (skb->len < TX_BUFLIMIT) { + np->tx_ring[entry].length = DescWholePkt | skb->len; + } else { + int len = skb->len - TX_BUFLIMIT; + + np->tx_ring[entry].buffer2 = np->tx_addr[entry]+TX_BUFLIMIT; + np->tx_ring[entry].length = DescWholePkt | (len << 11) | TX_BUFLIMIT; + } + if(entry == TX_RING_SIZE-1) + np->tx_ring[entry].length |= DescEndRing; + + /* Now acquire the irq spinlock. + * The difficult race is the ordering between + * increasing np->cur_tx and setting DescOwned: + * - if np->cur_tx is increased first the interrupt + * handler could consider the packet as transmitted + * since DescOwned is cleared. + * - If DescOwned is set first the NIC could report the + * packet as sent, but the interrupt handler would ignore it + * since the np->cur_tx was not yet increased. + */ + spin_lock_irq(&np->lock); + np->cur_tx++; + + wmb(); /* flush length, buffer1, buffer2 */ + np->tx_ring[entry].status = DescOwned; + wmb(); /* flush status and kick the hardware */ + iowrite32(0, np->base_addr + TxStartDemand); + np->tx_q_bytes += skb->len; + /* Work around horrible bug in the chip by marking the queue as full + when we do not have FIFO room for a maximum sized packet. */ + if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN || + ((np->drv_flags & HasBrokenTx) && np->tx_q_bytes > TX_BUG_FIFO_LIMIT)) { + netif_stop_queue(dev); + wmb(); + np->tx_full = 1; + } + spin_unlock_irq(&np->lock); + + if (debug > 4) { + netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n", + np->cur_tx, entry); + } + return NETDEV_TX_OK; +} + +static void netdev_tx_done(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { + int entry = np->dirty_tx % TX_RING_SIZE; + int tx_status = np->tx_ring[entry].status; + + if (tx_status < 0) + break; + if (tx_status & 0x8000) { /* There was an error, log it. */ +#ifndef final_version + if (debug > 1) + netdev_dbg(dev, "Transmit error, Tx status %08x\n", + tx_status); +#endif + np->stats.tx_errors++; + if (tx_status & 0x0104) np->stats.tx_aborted_errors++; + if (tx_status & 0x0C80) np->stats.tx_carrier_errors++; + if (tx_status & 0x0200) np->stats.tx_window_errors++; + if (tx_status & 0x0002) np->stats.tx_fifo_errors++; + if ((tx_status & 0x0080) && np->mii_if.full_duplex == 0) + np->stats.tx_heartbeat_errors++; + } else { +#ifndef final_version + if (debug > 3) + netdev_dbg(dev, "Transmit slot %d ok, Tx status %08x\n", + entry, tx_status); +#endif + np->stats.tx_bytes += np->tx_skbuff[entry]->len; + np->stats.collisions += (tx_status >> 3) & 15; + np->stats.tx_packets++; + } + /* Free the original skb. */ + pci_unmap_single(np->pci_dev,np->tx_addr[entry], + np->tx_skbuff[entry]->len, + PCI_DMA_TODEVICE); + np->tx_q_bytes -= np->tx_skbuff[entry]->len; + dev_kfree_skb_irq(np->tx_skbuff[entry]); + np->tx_skbuff[entry] = NULL; + } + if (np->tx_full && + np->cur_tx - np->dirty_tx < TX_QUEUE_LEN_RESTART && + np->tx_q_bytes < TX_BUG_FIFO_LIMIT) { + /* The ring is no longer full, clear tbusy. */ + np->tx_full = 0; + wmb(); + netif_wake_queue(dev); + } +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static irqreturn_t intr_handler(int irq, void *dev_instance) +{ + struct net_device *dev = (struct net_device *)dev_instance; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + int work_limit = max_interrupt_work; + int handled = 0; + + if (!netif_device_present(dev)) + return IRQ_NONE; + do { + u32 intr_status = ioread32(ioaddr + IntrStatus); + + /* Acknowledge all of the current interrupt sources ASAP. */ + iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus); + + if (debug > 4) + netdev_dbg(dev, "Interrupt, status %04x\n", intr_status); + + if ((intr_status & (NormalIntr|AbnormalIntr)) == 0) + break; + + handled = 1; + + if (intr_status & (RxIntr | RxNoBuf)) + netdev_rx(dev); + if (intr_status & RxNoBuf) + iowrite32(0, ioaddr + RxStartDemand); + + if (intr_status & (TxNoBuf | TxIntr) && + np->cur_tx != np->dirty_tx) { + spin_lock(&np->lock); + netdev_tx_done(dev); + spin_unlock(&np->lock); + } + + /* Abnormal error summary/uncommon events handlers. */ + if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SystemError | + TimerInt | TxDied)) + netdev_error(dev, intr_status); + + if (--work_limit < 0) { + dev_warn(&dev->dev, + "Too much work at interrupt, status=0x%04x\n", + intr_status); + /* Set the timer to re-enable the other interrupts after + 10*82usec ticks. */ + spin_lock(&np->lock); + if (netif_device_present(dev)) { + iowrite32(AbnormalIntr | TimerInt, ioaddr + IntrEnable); + iowrite32(10, ioaddr + GPTimer); + } + spin_unlock(&np->lock); + break; + } + } while (1); + + if (debug > 3) + netdev_dbg(dev, "exiting interrupt, status=%#4.4x\n", + ioread32(ioaddr + IntrStatus)); + return IRQ_RETVAL(handled); +} + +/* This routine is logically part of the interrupt handler, but separated + for clarity and better register allocation. */ +static int netdev_rx(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int entry = np->cur_rx % RX_RING_SIZE; + int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx; + + if (debug > 4) { + netdev_dbg(dev, " In netdev_rx(), entry %d status %04x\n", + entry, np->rx_ring[entry].status); + } + + /* If EOP is set on the next entry, it's a new packet. Send it up. */ + while (--work_limit >= 0) { + struct w840_rx_desc *desc = np->rx_head_desc; + s32 status = desc->status; + + if (debug > 4) + netdev_dbg(dev, " netdev_rx() status was %08x\n", + status); + if (status < 0) + break; + if ((status & 0x38008300) != 0x0300) { + if ((status & 0x38000300) != 0x0300) { + /* Ingore earlier buffers. */ + if ((status & 0xffff) != 0x7fff) { + dev_warn(&dev->dev, + "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n", + np->cur_rx, status); + np->stats.rx_length_errors++; + } + } else if (status & 0x8000) { + /* There was a fatal error. */ + if (debug > 2) + netdev_dbg(dev, "Receive error, Rx status %08x\n", + status); + np->stats.rx_errors++; /* end of a packet.*/ + if (status & 0x0890) np->stats.rx_length_errors++; + if (status & 0x004C) np->stats.rx_frame_errors++; + if (status & 0x0002) np->stats.rx_crc_errors++; + } + } else { + struct sk_buff *skb; + /* Omit the four octet CRC from the length. */ + int pkt_len = ((status >> 16) & 0x7ff) - 4; + +#ifndef final_version + if (debug > 4) + netdev_dbg(dev, " netdev_rx() normal Rx pkt length %d status %x\n", + pkt_len, status); +#endif + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak && + (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* 16 byte align the IP header */ + pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry], + np->rx_skbuff[entry]->len, + PCI_DMA_FROMDEVICE); + skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); + skb_put(skb, pkt_len); + pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry], + np->rx_skbuff[entry]->len, + PCI_DMA_FROMDEVICE); + } else { + pci_unmap_single(np->pci_dev,np->rx_addr[entry], + np->rx_skbuff[entry]->len, + PCI_DMA_FROMDEVICE); + skb_put(skb = np->rx_skbuff[entry], pkt_len); + np->rx_skbuff[entry] = NULL; + } +#ifndef final_version /* Remove after testing. */ + /* You will want this info for the initial debug. */ + if (debug > 5) + netdev_dbg(dev, " Rx data %pM %pM %02x%02x %pI4\n", + &skb->data[0], &skb->data[6], + skb->data[12], skb->data[13], + &skb->data[14]); +#endif + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + np->stats.rx_packets++; + np->stats.rx_bytes += pkt_len; + } + entry = (++np->cur_rx) % RX_RING_SIZE; + np->rx_head_desc = &np->rx_ring[entry]; + } + + /* Refill the Rx ring buffers. */ + for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { + struct sk_buff *skb; + entry = np->dirty_rx % RX_RING_SIZE; + if (np->rx_skbuff[entry] == NULL) { + skb = dev_alloc_skb(np->rx_buf_sz); + np->rx_skbuff[entry] = skb; + if (skb == NULL) + break; /* Better luck next round. */ + np->rx_addr[entry] = pci_map_single(np->pci_dev, + skb->data, + np->rx_buf_sz, PCI_DMA_FROMDEVICE); + np->rx_ring[entry].buffer1 = np->rx_addr[entry]; + } + wmb(); + np->rx_ring[entry].status = DescOwned; + } + + return 0; +} + +static void netdev_error(struct net_device *dev, int intr_status) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + if (debug > 2) + netdev_dbg(dev, "Abnormal event, %08x\n", intr_status); + if (intr_status == 0xffffffff) + return; + spin_lock(&np->lock); + if (intr_status & TxFIFOUnderflow) { + int new; + /* Bump up the Tx threshold */ +#if 0 + /* This causes lots of dropped packets, + * and under high load even tx_timeouts + */ + new = np->csr6 + 0x4000; +#else + new = (np->csr6 >> 14)&0x7f; + if (new < 64) + new *= 2; + else + new = 127; /* load full packet before starting */ + new = (np->csr6 & ~(0x7F << 14)) | (new<<14); +#endif + netdev_dbg(dev, "Tx underflow, new csr6 %08x\n", new); + update_csr6(dev, new); + } + if (intr_status & RxDied) { /* Missed a Rx frame. */ + np->stats.rx_errors++; + } + if (intr_status & TimerInt) { + /* Re-enable other interrupts. */ + if (netif_device_present(dev)) + iowrite32(0x1A0F5, ioaddr + IntrEnable); + } + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; + iowrite32(0, ioaddr + RxStartDemand); + spin_unlock(&np->lock); +} + +static struct net_device_stats *get_stats(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + /* The chip only need report frame silently dropped. */ + spin_lock_irq(&np->lock); + if (netif_running(dev) && netif_device_present(dev)) + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; + spin_unlock_irq(&np->lock); + + return &np->stats; +} + + +static u32 __set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + u32 mc_filter[2]; /* Multicast hash filter */ + u32 rx_mode; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + memset(mc_filter, 0xff, sizeof(mc_filter)); + rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys + | AcceptMyPhys; + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to match, or accept all multicasts. */ + memset(mc_filter, 0xff, sizeof(mc_filter)); + rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; + } else { + struct netdev_hw_addr *ha; + + memset(mc_filter, 0, sizeof(mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + int filbit; + + filbit = (ether_crc(ETH_ALEN, ha->addr) >> 26) ^ 0x3F; + filbit &= 0x3f; + mc_filter[filbit >> 5] |= 1 << (filbit & 31); + } + rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; + } + iowrite32(mc_filter[0], ioaddr + MulticastFilter0); + iowrite32(mc_filter[1], ioaddr + MulticastFilter1); + return rx_mode; +} + +static void set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + u32 rx_mode = __set_rx_mode(dev); + spin_lock_irq(&np->lock); + update_csr6(dev, (np->csr6 & ~0x00F8) | rx_mode); + spin_unlock_irq(&np->lock); +} + +static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct netdev_private *np = netdev_priv(dev); + + strcpy (info->driver, DRV_NAME); + strcpy (info->version, DRV_VERSION); + strcpy (info->bus_info, pci_name(np->pci_dev)); +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct netdev_private *np = netdev_priv(dev); + int rc; + + spin_lock_irq(&np->lock); + rc = mii_ethtool_gset(&np->mii_if, cmd); + spin_unlock_irq(&np->lock); + + return rc; +} + +static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct netdev_private *np = netdev_priv(dev); + int rc; + + spin_lock_irq(&np->lock); + rc = mii_ethtool_sset(&np->mii_if, cmd); + spin_unlock_irq(&np->lock); + + return rc; +} + +static int netdev_nway_reset(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return mii_nway_restart(&np->mii_if); +} + +static u32 netdev_get_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return mii_link_ok(&np->mii_if); +} + +static u32 netdev_get_msglevel(struct net_device *dev) +{ + return debug; +} + +static void netdev_set_msglevel(struct net_device *dev, u32 value) +{ + debug = value; +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .set_settings = netdev_set_settings, + .nway_reset = netdev_nway_reset, + .get_link = netdev_get_link, + .get_msglevel = netdev_get_msglevel, + .set_msglevel = netdev_set_msglevel, +}; + +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct mii_ioctl_data *data = if_mii(rq); + struct netdev_private *np = netdev_priv(dev); + + switch(cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + data->phy_id = ((struct netdev_private *)netdev_priv(dev))->phys[0] & 0x1f; + /* Fall Through */ + + case SIOCGMIIREG: /* Read MII PHY register. */ + spin_lock_irq(&np->lock); + data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f); + spin_unlock_irq(&np->lock); + return 0; + + case SIOCSMIIREG: /* Write MII PHY register. */ + spin_lock_irq(&np->lock); + mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); + spin_unlock_irq(&np->lock); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int netdev_close(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + netif_stop_queue(dev); + + if (debug > 1) { + netdev_dbg(dev, "Shutting down ethercard, status was %08x Config %08x\n", + ioread32(ioaddr + IntrStatus), + ioread32(ioaddr + NetworkConfig)); + netdev_dbg(dev, "Queue pointers were Tx %d / %d, Rx %d / %d\n", + np->cur_tx, np->dirty_tx, + np->cur_rx, np->dirty_rx); + } + + /* Stop the chip's Tx and Rx processes. */ + spin_lock_irq(&np->lock); + netif_device_detach(dev); + update_csr6(dev, 0); + iowrite32(0x0000, ioaddr + IntrEnable); + spin_unlock_irq(&np->lock); + + free_irq(dev->irq, dev); + wmb(); + netif_device_attach(dev); + + if (ioread32(ioaddr + NetworkConfig) != 0xffffffff) + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; + +#ifdef __i386__ + if (debug > 2) { + int i; + + printk(KERN_DEBUG" Tx ring at %p:\n", np->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) + printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n", + i, np->tx_ring[i].length, + np->tx_ring[i].status, np->tx_ring[i].buffer1); + printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) { + printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n", + i, np->rx_ring[i].length, + np->rx_ring[i].status, np->rx_ring[i].buffer1); + } + } +#endif /* __i386__ debugging only */ + + del_timer_sync(&np->timer); + + free_rxtx_rings(np); + free_ringdesc(np); + + return 0; +} + +static void __devexit w840_remove1 (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + struct netdev_private *np = netdev_priv(dev); + unregister_netdev(dev); + pci_release_regions(pdev); + pci_iounmap(pdev, np->base_addr); + free_netdev(dev); + } + + pci_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM + +/* + * suspend/resume synchronization: + * - open, close, do_ioctl: + * rtnl_lock, & netif_device_detach after the rtnl_unlock. + * - get_stats: + * spin_lock_irq(np->lock), doesn't touch hw if not present + * - start_xmit: + * synchronize_irq + netif_tx_disable; + * - tx_timeout: + * netif_device_detach + netif_tx_disable; + * - set_multicast_list + * netif_device_detach + netif_tx_disable; + * - interrupt handler + * doesn't touch hw if not present, synchronize_irq waits for + * running instances of the interrupt handler. + * + * Disabling hw requires clearing csr6 & IntrEnable. + * update_csr6 & all function that write IntrEnable check netif_device_present + * before settings any bits. + * + * Detach must occur under spin_unlock_irq(), interrupts from a detached + * device would cause an irq storm. + */ +static int w840_suspend (struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base_addr; + + rtnl_lock(); + if (netif_running (dev)) { + del_timer_sync(&np->timer); + + spin_lock_irq(&np->lock); + netif_device_detach(dev); + update_csr6(dev, 0); + iowrite32(0, ioaddr + IntrEnable); + spin_unlock_irq(&np->lock); + + synchronize_irq(dev->irq); + netif_tx_disable(dev); + + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; + + /* no more hardware accesses behind this line. */ + + BUG_ON(np->csr6 || ioread32(ioaddr + IntrEnable)); + + /* pci_power_off(pdev, -1); */ + + free_rxtx_rings(np); + } else { + netif_device_detach(dev); + } + rtnl_unlock(); + return 0; +} + +static int w840_resume (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct netdev_private *np = netdev_priv(dev); + int retval = 0; + + rtnl_lock(); + if (netif_device_present(dev)) + goto out; /* device not suspended */ + if (netif_running(dev)) { + if ((retval = pci_enable_device(pdev))) { + dev_err(&dev->dev, + "pci_enable_device failed in resume\n"); + goto out; + } + spin_lock_irq(&np->lock); + iowrite32(1, np->base_addr+PCIBusCfg); + ioread32(np->base_addr+PCIBusCfg); + udelay(1); + netif_device_attach(dev); + init_rxtx_rings(dev); + init_registers(dev); + spin_unlock_irq(&np->lock); + + netif_wake_queue(dev); + + mod_timer(&np->timer, jiffies + 1*HZ); + } else { + netif_device_attach(dev); + } +out: + rtnl_unlock(); + return retval; +} +#endif + +static struct pci_driver w840_driver = { + .name = DRV_NAME, + .id_table = w840_pci_tbl, + .probe = w840_probe1, + .remove = __devexit_p(w840_remove1), +#ifdef CONFIG_PM + .suspend = w840_suspend, + .resume = w840_resume, +#endif +}; + +static int __init w840_init(void) +{ + printk(version); + return pci_register_driver(&w840_driver); +} + +static void __exit w840_exit(void) +{ + pci_unregister_driver(&w840_driver); +} + +module_init(w840_init); +module_exit(w840_exit); diff --git a/drivers/net/ethernet/dec/tulip/xircom_cb.c b/drivers/net/ethernet/dec/tulip/xircom_cb.c new file mode 100644 index 00000000000..988b8eb24d3 --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/xircom_cb.c @@ -0,0 +1,1154 @@ +/* + * xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards + * + * This software is (C) by the respective authors, and licensed under the GPL + * License. + * + * Written by Arjan van de Ven for Red Hat, Inc. + * Based on work by Jeff Garzik, Doug Ledford and Donald Becker + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + * + * $Id: xircom_cb.c,v 1.33 2001/03/19 14:02:07 arjanv Exp $ + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/bitops.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#ifdef CONFIG_NET_POLL_CONTROLLER +#include <asm/irq.h> +#endif + +MODULE_DESCRIPTION("Xircom Cardbus ethernet driver"); +MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>"); +MODULE_LICENSE("GPL"); + + + +/* IO registers on the card, offsets */ +#define CSR0 0x00 +#define CSR1 0x08 +#define CSR2 0x10 +#define CSR3 0x18 +#define CSR4 0x20 +#define CSR5 0x28 +#define CSR6 0x30 +#define CSR7 0x38 +#define CSR8 0x40 +#define CSR9 0x48 +#define CSR10 0x50 +#define CSR11 0x58 +#define CSR12 0x60 +#define CSR13 0x68 +#define CSR14 0x70 +#define CSR15 0x78 +#define CSR16 0x80 + +/* PCI registers */ +#define PCI_POWERMGMT 0x40 + +/* Offsets of the buffers within the descriptor pages, in bytes */ + +#define NUMDESCRIPTORS 4 + +static int bufferoffsets[NUMDESCRIPTORS] = {128,2048,4096,6144}; + + +struct xircom_private { + /* Send and receive buffers, kernel-addressable and dma addressable forms */ + + __le32 *rx_buffer; + __le32 *tx_buffer; + + dma_addr_t rx_dma_handle; + dma_addr_t tx_dma_handle; + + struct sk_buff *tx_skb[4]; + + unsigned long io_port; + int open; + + /* transmit_used is the rotating counter that indicates which transmit + descriptor has to be used next */ + int transmit_used; + + /* Spinlock to serialize register operations. + It must be helt while manipulating the following registers: + CSR0, CSR6, CSR7, CSR9, CSR10, CSR15 + */ + spinlock_t lock; + + struct pci_dev *pdev; + struct net_device *dev; +}; + + +/* Function prototypes */ +static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id); +static void xircom_remove(struct pci_dev *pdev); +static irqreturn_t xircom_interrupt(int irq, void *dev_instance); +static netdev_tx_t xircom_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static int xircom_open(struct net_device *dev); +static int xircom_close(struct net_device *dev); +static void xircom_up(struct xircom_private *card); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void xircom_poll_controller(struct net_device *dev); +#endif + +static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset); +static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset); +static void read_mac_address(struct xircom_private *card); +static void transceiver_voodoo(struct xircom_private *card); +static void initialize_card(struct xircom_private *card); +static void trigger_transmit(struct xircom_private *card); +static void trigger_receive(struct xircom_private *card); +static void setup_descriptors(struct xircom_private *card); +static void remove_descriptors(struct xircom_private *card); +static int link_status_changed(struct xircom_private *card); +static void activate_receiver(struct xircom_private *card); +static void deactivate_receiver(struct xircom_private *card); +static void activate_transmitter(struct xircom_private *card); +static void deactivate_transmitter(struct xircom_private *card); +static void enable_transmit_interrupt(struct xircom_private *card); +static void enable_receive_interrupt(struct xircom_private *card); +static void enable_link_interrupt(struct xircom_private *card); +static void disable_all_interrupts(struct xircom_private *card); +static int link_status(struct xircom_private *card); + + + +static DEFINE_PCI_DEVICE_TABLE(xircom_pci_table) = { + {0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, +}; +MODULE_DEVICE_TABLE(pci, xircom_pci_table); + +static struct pci_driver xircom_ops = { + .name = "xircom_cb", + .id_table = xircom_pci_table, + .probe = xircom_probe, + .remove = xircom_remove, + .suspend =NULL, + .resume =NULL +}; + + +#if defined DEBUG && DEBUG > 1 +static void print_binary(unsigned int number) +{ + int i,i2; + char buffer[64]; + memset(buffer,0,64); + i2=0; + for (i=31;i>=0;i--) { + if (number & (1<<i)) + buffer[i2++]='1'; + else + buffer[i2++]='0'; + if ((i&3)==0) + buffer[i2++]=' '; + } + pr_debug("%s\n",buffer); +} +#endif + +static const struct net_device_ops netdev_ops = { + .ndo_open = xircom_open, + .ndo_stop = xircom_close, + .ndo_start_xmit = xircom_start_xmit, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = xircom_poll_controller, +#endif +}; + +/* xircom_probe is the code that gets called on device insertion. + it sets up the hardware and registers the device to the networklayer. + + TODO: Send 1 or 2 "dummy" packets here as the card seems to discard the + first two packets that get send, and pump hates that. + + */ +static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net_device *dev = NULL; + struct xircom_private *private; + unsigned long flags; + unsigned short tmp16; + + /* First do the PCI initialisation */ + + if (pci_enable_device(pdev)) + return -ENODEV; + + /* disable all powermanagement */ + pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000); + + pci_set_master(pdev); /* Why isn't this done by pci_enable_device ?*/ + + /* clear PCI status, if any */ + pci_read_config_word (pdev,PCI_STATUS, &tmp16); + pci_write_config_word (pdev, PCI_STATUS,tmp16); + + if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) { + pr_err("%s: failed to allocate io-region\n", __func__); + return -ENODEV; + } + + /* + Before changing the hardware, allocate the memory. + This way, we can fail gracefully if not enough memory + is available. + */ + dev = alloc_etherdev(sizeof(struct xircom_private)); + if (!dev) { + pr_err("%s: failed to allocate etherdev\n", __func__); + goto device_fail; + } + private = netdev_priv(dev); + + /* Allocate the send/receive buffers */ + private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle); + if (private->rx_buffer == NULL) { + pr_err("%s: no memory for rx buffer\n", __func__); + goto rx_buf_fail; + } + private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle); + if (private->tx_buffer == NULL) { + pr_err("%s: no memory for tx buffer\n", __func__); + goto tx_buf_fail; + } + + SET_NETDEV_DEV(dev, &pdev->dev); + + + private->dev = dev; + private->pdev = pdev; + private->io_port = pci_resource_start(pdev, 0); + spin_lock_init(&private->lock); + dev->irq = pdev->irq; + dev->base_addr = private->io_port; + + initialize_card(private); + read_mac_address(private); + setup_descriptors(private); + + dev->netdev_ops = &netdev_ops; + pci_set_drvdata(pdev, dev); + + if (register_netdev(dev)) { + pr_err("%s: netdevice registration failed\n", __func__); + goto reg_fail; + } + + netdev_info(dev, "Xircom cardbus revision %i at irq %i\n", + pdev->revision, pdev->irq); + /* start the transmitter to get a heartbeat */ + /* TODO: send 2 dummy packets here */ + transceiver_voodoo(private); + + spin_lock_irqsave(&private->lock,flags); + activate_transmitter(private); + activate_receiver(private); + spin_unlock_irqrestore(&private->lock,flags); + + trigger_receive(private); + + return 0; + +reg_fail: + kfree(private->tx_buffer); +tx_buf_fail: + kfree(private->rx_buffer); +rx_buf_fail: + free_netdev(dev); +device_fail: + return -ENODEV; +} + + +/* + xircom_remove is called on module-unload or on device-eject. + it unregisters the irq, io-region and network device. + Interrupts and such are already stopped in the "ifconfig ethX down" + code. + */ +static void __devexit xircom_remove(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct xircom_private *card = netdev_priv(dev); + + pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle); + pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle); + + release_region(dev->base_addr, 128); + unregister_netdev(dev); + free_netdev(dev); + pci_set_drvdata(pdev, NULL); +} + +static irqreturn_t xircom_interrupt(int irq, void *dev_instance) +{ + struct net_device *dev = (struct net_device *) dev_instance; + struct xircom_private *card = netdev_priv(dev); + unsigned int status; + int i; + + spin_lock(&card->lock); + status = inl(card->io_port+CSR5); + +#if defined DEBUG && DEBUG > 1 + print_binary(status); + pr_debug("tx status 0x%08x 0x%08x\n", + card->tx_buffer[0], card->tx_buffer[4]); + pr_debug("rx status 0x%08x 0x%08x\n", + card->rx_buffer[0], card->rx_buffer[4]); +#endif + /* Handle shared irq and hotplug */ + if (status == 0 || status == 0xffffffff) { + spin_unlock(&card->lock); + return IRQ_NONE; + } + + if (link_status_changed(card)) { + int newlink; + netdev_dbg(dev, "Link status has changed\n"); + newlink = link_status(card); + netdev_info(dev, "Link is %d mbit\n", newlink); + if (newlink) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + + } + + /* Clear all remaining interrupts */ + status |= 0xffffffff; /* FIXME: make this clear only the + real existing bits */ + outl(status,card->io_port+CSR5); + + + for (i=0;i<NUMDESCRIPTORS;i++) + investigate_write_descriptor(dev,card,i,bufferoffsets[i]); + for (i=0;i<NUMDESCRIPTORS;i++) + investigate_read_descriptor(dev,card,i,bufferoffsets[i]); + + spin_unlock(&card->lock); + return IRQ_HANDLED; +} + +static netdev_tx_t xircom_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct xircom_private *card; + unsigned long flags; + int nextdescriptor; + int desc; + + card = netdev_priv(dev); + spin_lock_irqsave(&card->lock,flags); + + /* First see if we can free some descriptors */ + for (desc=0;desc<NUMDESCRIPTORS;desc++) + investigate_write_descriptor(dev,card,desc,bufferoffsets[desc]); + + + nextdescriptor = (card->transmit_used +1) % (NUMDESCRIPTORS); + desc = card->transmit_used; + + /* only send the packet if the descriptor is free */ + if (card->tx_buffer[4*desc]==0) { + /* Copy the packet data; zero the memory first as the card + sometimes sends more than you ask it to. */ + + memset(&card->tx_buffer[bufferoffsets[desc]/4],0,1536); + skb_copy_from_linear_data(skb, + &(card->tx_buffer[bufferoffsets[desc] / 4]), + skb->len); + /* FIXME: The specification tells us that the length we send HAS to be a multiple of + 4 bytes. */ + + card->tx_buffer[4*desc+1] = cpu_to_le32(skb->len); + if (desc == NUMDESCRIPTORS - 1) /* bit 25: last descriptor of the ring */ + card->tx_buffer[4*desc+1] |= cpu_to_le32(1<<25); + + card->tx_buffer[4*desc+1] |= cpu_to_le32(0xF0000000); + /* 0xF0... means want interrupts*/ + card->tx_skb[desc] = skb; + + wmb(); + /* This gives the descriptor to the card */ + card->tx_buffer[4*desc] = cpu_to_le32(0x80000000); + trigger_transmit(card); + if (card->tx_buffer[nextdescriptor*4] & cpu_to_le32(0x8000000)) { + /* next descriptor is occupied... */ + netif_stop_queue(dev); + } + card->transmit_used = nextdescriptor; + spin_unlock_irqrestore(&card->lock,flags); + return NETDEV_TX_OK; + } + + /* Uh oh... no free descriptor... drop the packet */ + netif_stop_queue(dev); + spin_unlock_irqrestore(&card->lock,flags); + trigger_transmit(card); + + return NETDEV_TX_BUSY; +} + + + + +static int xircom_open(struct net_device *dev) +{ + struct xircom_private *xp = netdev_priv(dev); + int retval; + + netdev_info(dev, "xircom cardbus adaptor found, using irq %i\n", + dev->irq); + retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev); + if (retval) + return retval; + + xircom_up(xp); + xp->open = 1; + + return 0; +} + +static int xircom_close(struct net_device *dev) +{ + struct xircom_private *card; + unsigned long flags; + + card = netdev_priv(dev); + netif_stop_queue(dev); /* we don't want new packets */ + + + spin_lock_irqsave(&card->lock,flags); + + disable_all_interrupts(card); +#if 0 + /* We can enable this again once we send dummy packets on ifconfig ethX up */ + deactivate_receiver(card); + deactivate_transmitter(card); +#endif + remove_descriptors(card); + + spin_unlock_irqrestore(&card->lock,flags); + + card->open = 0; + free_irq(dev->irq,dev); + + return 0; + +} + + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void xircom_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + xircom_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + + +static void initialize_card(struct xircom_private *card) +{ + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&card->lock, flags); + + /* First: reset the card */ + val = inl(card->io_port + CSR0); + val |= 0x01; /* Software reset */ + outl(val, card->io_port + CSR0); + + udelay(100); /* give the card some time to reset */ + + val = inl(card->io_port + CSR0); + val &= ~0x01; /* disable Software reset */ + outl(val, card->io_port + CSR0); + + + val = 0; /* Value 0x00 is a safe and conservative value + for the PCI configuration settings */ + outl(val, card->io_port + CSR0); + + + disable_all_interrupts(card); + deactivate_receiver(card); + deactivate_transmitter(card); + + spin_unlock_irqrestore(&card->lock, flags); +} + +/* +trigger_transmit causes the card to check for frames to be transmitted. +This is accomplished by writing to the CSR1 port. The documentation +claims that the act of writing is sufficient and that the value is +ignored; I chose zero. +*/ +static void trigger_transmit(struct xircom_private *card) +{ + unsigned int val; + + val = 0; + outl(val, card->io_port + CSR1); +} + +/* +trigger_receive causes the card to check for empty frames in the +descriptor list in which packets can be received. +This is accomplished by writing to the CSR2 port. The documentation +claims that the act of writing is sufficient and that the value is +ignored; I chose zero. +*/ +static void trigger_receive(struct xircom_private *card) +{ + unsigned int val; + + val = 0; + outl(val, card->io_port + CSR2); +} + +/* +setup_descriptors initializes the send and receive buffers to be valid +descriptors and programs the addresses into the card. +*/ +static void setup_descriptors(struct xircom_private *card) +{ + u32 address; + int i; + + BUG_ON(card->rx_buffer == NULL); + BUG_ON(card->tx_buffer == NULL); + + /* Receive descriptors */ + memset(card->rx_buffer, 0, 128); /* clear the descriptors */ + for (i=0;i<NUMDESCRIPTORS;i++ ) { + + /* Rx Descr0: It's empty, let the card own it, no errors -> 0x80000000 */ + card->rx_buffer[i*4 + 0] = cpu_to_le32(0x80000000); + /* Rx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */ + card->rx_buffer[i*4 + 1] = cpu_to_le32(1536); + if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */ + card->rx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25); + + /* Rx Descr2: address of the buffer + we store the buffer at the 2nd half of the page */ + + address = card->rx_dma_handle; + card->rx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]); + /* Rx Desc3: address of 2nd buffer -> 0 */ + card->rx_buffer[i*4 + 3] = 0; + } + + wmb(); + /* Write the receive descriptor ring address to the card */ + address = card->rx_dma_handle; + outl(address, card->io_port + CSR3); /* Receive descr list address */ + + + /* transmit descriptors */ + memset(card->tx_buffer, 0, 128); /* clear the descriptors */ + + for (i=0;i<NUMDESCRIPTORS;i++ ) { + /* Tx Descr0: Empty, we own it, no errors -> 0x00000000 */ + card->tx_buffer[i*4 + 0] = 0x00000000; + /* Tx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */ + card->tx_buffer[i*4 + 1] = cpu_to_le32(1536); + if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */ + card->tx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25); + + /* Tx Descr2: address of the buffer + we store the buffer at the 2nd half of the page */ + address = card->tx_dma_handle; + card->tx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]); + /* Tx Desc3: address of 2nd buffer -> 0 */ + card->tx_buffer[i*4 + 3] = 0; + } + + wmb(); + /* wite the transmit descriptor ring to the card */ + address = card->tx_dma_handle; + outl(address, card->io_port + CSR4); /* xmit descr list address */ +} + +/* +remove_descriptors informs the card the descriptors are no longer +valid by setting the address in the card to 0x00. +*/ +static void remove_descriptors(struct xircom_private *card) +{ + unsigned int val; + + val = 0; + outl(val, card->io_port + CSR3); /* Receive descriptor address */ + outl(val, card->io_port + CSR4); /* Send descriptor address */ +} + +/* +link_status_changed returns 1 if the card has indicated that +the link status has changed. The new link status has to be read from CSR12. + +This function also clears the status-bit. +*/ +static int link_status_changed(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR5); /* Status register */ + + if ((val & (1 << 27)) == 0) /* no change */ + return 0; + + /* clear the event by writing a 1 to the bit in the + status register. */ + val = (1 << 27); + outl(val, card->io_port + CSR5); + + return 1; +} + + +/* +transmit_active returns 1 if the transmitter on the card is +in a non-stopped state. +*/ +static int transmit_active(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR5); /* Status register */ + + if ((val & (7 << 20)) == 0) /* transmitter disabled */ + return 0; + + return 1; +} + +/* +receive_active returns 1 if the receiver on the card is +in a non-stopped state. +*/ +static int receive_active(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR5); /* Status register */ + + if ((val & (7 << 17)) == 0) /* receiver disabled */ + return 0; + + return 1; +} + +/* +activate_receiver enables the receiver on the card. +Before being allowed to active the receiver, the receiver +must be completely de-activated. To achieve this, +this code actually disables the receiver first; then it waits for the +receiver to become inactive, then it activates the receiver and then +it waits for the receiver to be active. + +must be called with the lock held and interrupts disabled. +*/ +static void activate_receiver(struct xircom_private *card) +{ + unsigned int val; + int counter; + + val = inl(card->io_port + CSR6); /* Operation mode */ + + /* If the "active" bit is set and the receiver is already + active, no need to do the expensive thing */ + if ((val&2) && (receive_active(card))) + return; + + + val = val & ~2; /* disable the receiver */ + outl(val, card->io_port + CSR6); + + counter = 10; + while (counter > 0) { + if (!receive_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, "Receiver failed to deactivate\n"); + } + + /* enable the receiver */ + val = inl(card->io_port + CSR6); /* Operation mode */ + val = val | 2; /* enable the receiver */ + outl(val, card->io_port + CSR6); + + /* now wait for the card to activate again */ + counter = 10; + while (counter > 0) { + if (receive_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, + "Receiver failed to re-activate\n"); + } +} + +/* +deactivate_receiver disables the receiver on the card. +To achieve this this code disables the receiver first; +then it waits for the receiver to become inactive. + +must be called with the lock held and interrupts disabled. +*/ +static void deactivate_receiver(struct xircom_private *card) +{ + unsigned int val; + int counter; + + val = inl(card->io_port + CSR6); /* Operation mode */ + val = val & ~2; /* disable the receiver */ + outl(val, card->io_port + CSR6); + + counter = 10; + while (counter > 0) { + if (!receive_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, "Receiver failed to deactivate\n"); + } +} + + +/* +activate_transmitter enables the transmitter on the card. +Before being allowed to active the transmitter, the transmitter +must be completely de-activated. To achieve this, +this code actually disables the transmitter first; then it waits for the +transmitter to become inactive, then it activates the transmitter and then +it waits for the transmitter to be active again. + +must be called with the lock held and interrupts disabled. +*/ +static void activate_transmitter(struct xircom_private *card) +{ + unsigned int val; + int counter; + + val = inl(card->io_port + CSR6); /* Operation mode */ + + /* If the "active" bit is set and the receiver is already + active, no need to do the expensive thing */ + if ((val&(1<<13)) && (transmit_active(card))) + return; + + val = val & ~(1 << 13); /* disable the transmitter */ + outl(val, card->io_port + CSR6); + + counter = 10; + while (counter > 0) { + if (!transmit_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, + "Transmitter failed to deactivate\n"); + } + + /* enable the transmitter */ + val = inl(card->io_port + CSR6); /* Operation mode */ + val = val | (1 << 13); /* enable the transmitter */ + outl(val, card->io_port + CSR6); + + /* now wait for the card to activate again */ + counter = 10; + while (counter > 0) { + if (transmit_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, + "Transmitter failed to re-activate\n"); + } +} + +/* +deactivate_transmitter disables the transmitter on the card. +To achieve this this code disables the transmitter first; +then it waits for the transmitter to become inactive. + +must be called with the lock held and interrupts disabled. +*/ +static void deactivate_transmitter(struct xircom_private *card) +{ + unsigned int val; + int counter; + + val = inl(card->io_port + CSR6); /* Operation mode */ + val = val & ~2; /* disable the transmitter */ + outl(val, card->io_port + CSR6); + + counter = 20; + while (counter > 0) { + if (!transmit_active(card)) + break; + /* wait a while */ + udelay(50); + counter--; + if (counter <= 0) + netdev_err(card->dev, + "Transmitter failed to deactivate\n"); + } +} + + +/* +enable_transmit_interrupt enables the transmit interrupt + +must be called with the lock held and interrupts disabled. +*/ +static void enable_transmit_interrupt(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val |= 1; /* enable the transmit interrupt */ + outl(val, card->io_port + CSR7); +} + + +/* +enable_receive_interrupt enables the receive interrupt + +must be called with the lock held and interrupts disabled. +*/ +static void enable_receive_interrupt(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val = val | (1 << 6); /* enable the receive interrupt */ + outl(val, card->io_port + CSR7); +} + +/* +enable_link_interrupt enables the link status change interrupt + +must be called with the lock held and interrupts disabled. +*/ +static void enable_link_interrupt(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val = val | (1 << 27); /* enable the link status chage interrupt */ + outl(val, card->io_port + CSR7); +} + + + +/* +disable_all_interrupts disables all interrupts + +must be called with the lock held and interrupts disabled. +*/ +static void disable_all_interrupts(struct xircom_private *card) +{ + unsigned int val; + + val = 0; /* disable all interrupts */ + outl(val, card->io_port + CSR7); +} + +/* +enable_common_interrupts enables several weird interrupts + +must be called with the lock held and interrupts disabled. +*/ +static void enable_common_interrupts(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR7); /* Interrupt enable register */ + val |= (1<<16); /* Normal Interrupt Summary */ + val |= (1<<15); /* Abnormal Interrupt Summary */ + val |= (1<<13); /* Fatal bus error */ + val |= (1<<8); /* Receive Process Stopped */ + val |= (1<<7); /* Receive Buffer Unavailable */ + val |= (1<<5); /* Transmit Underflow */ + val |= (1<<2); /* Transmit Buffer Unavailable */ + val |= (1<<1); /* Transmit Process Stopped */ + outl(val, card->io_port + CSR7); +} + +/* +enable_promisc starts promisc mode + +must be called with the lock held and interrupts disabled. +*/ +static int enable_promisc(struct xircom_private *card) +{ + unsigned int val; + + val = inl(card->io_port + CSR6); + val = val | (1 << 6); + outl(val, card->io_port + CSR6); + + return 1; +} + + + + +/* +link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what. + +Must be called in locked state with interrupts disabled +*/ +static int link_status(struct xircom_private *card) +{ + unsigned int val; + + val = inb(card->io_port + CSR12); + + if (!(val&(1<<2))) /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */ + return 10; + if (!(val&(1<<1))) /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */ + return 100; + + /* If we get here -> no link at all */ + + return 0; +} + + + + + +/* + read_mac_address() reads the MAC address from the NIC and stores it in the "dev" structure. + + This function will take the spinlock itself and can, as a result, not be called with the lock helt. + */ +static void read_mac_address(struct xircom_private *card) +{ + unsigned char j, tuple, link, data_id, data_count; + unsigned long flags; + int i; + + spin_lock_irqsave(&card->lock, flags); + + outl(1 << 12, card->io_port + CSR9); /* enable boot rom access */ + for (i = 0x100; i < 0x1f7; i += link + 2) { + outl(i, card->io_port + CSR10); + tuple = inl(card->io_port + CSR9) & 0xff; + outl(i + 1, card->io_port + CSR10); + link = inl(card->io_port + CSR9) & 0xff; + outl(i + 2, card->io_port + CSR10); + data_id = inl(card->io_port + CSR9) & 0xff; + outl(i + 3, card->io_port + CSR10); + data_count = inl(card->io_port + CSR9) & 0xff; + if ((tuple == 0x22) && (data_id == 0x04) && (data_count == 0x06)) { + /* + * This is it. We have the data we want. + */ + for (j = 0; j < 6; j++) { + outl(i + j + 4, card->io_port + CSR10); + card->dev->dev_addr[j] = inl(card->io_port + CSR9) & 0xff; + } + break; + } else if (link == 0) { + break; + } + } + spin_unlock_irqrestore(&card->lock, flags); + pr_debug(" %pM\n", card->dev->dev_addr); +} + + +/* + transceiver_voodoo() enables the external UTP plug thingy. + it's called voodoo as I stole this code and cannot cross-reference + it with the specification. + */ +static void transceiver_voodoo(struct xircom_private *card) +{ + unsigned long flags; + + /* disable all powermanagement */ + pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000); + + setup_descriptors(card); + + spin_lock_irqsave(&card->lock, flags); + + outl(0x0008, card->io_port + CSR15); + udelay(25); + outl(0xa8050000, card->io_port + CSR15); + udelay(25); + outl(0xa00f0000, card->io_port + CSR15); + udelay(25); + + spin_unlock_irqrestore(&card->lock, flags); + + netif_start_queue(card->dev); +} + + +static void xircom_up(struct xircom_private *card) +{ + unsigned long flags; + int i; + + /* disable all powermanagement */ + pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000); + + setup_descriptors(card); + + spin_lock_irqsave(&card->lock, flags); + + + enable_link_interrupt(card); + enable_transmit_interrupt(card); + enable_receive_interrupt(card); + enable_common_interrupts(card); + enable_promisc(card); + + /* The card can have received packets already, read them away now */ + for (i=0;i<NUMDESCRIPTORS;i++) + investigate_read_descriptor(card->dev,card,i,bufferoffsets[i]); + + + spin_unlock_irqrestore(&card->lock, flags); + trigger_receive(card); + trigger_transmit(card); + netif_start_queue(card->dev); +} + +/* Bufferoffset is in BYTES */ +static void +investigate_read_descriptor(struct net_device *dev, struct xircom_private *card, + int descnr, unsigned int bufferoffset) +{ + int status; + + status = le32_to_cpu(card->rx_buffer[4*descnr]); + + if (status > 0) { /* packet received */ + + /* TODO: discard error packets */ + + short pkt_len = ((status >> 16) & 0x7ff) - 4; + /* minus 4, we don't want the CRC */ + struct sk_buff *skb; + + if (pkt_len > 1518) { + netdev_err(dev, "Packet length %i is bogus\n", pkt_len); + pkt_len = 1518; + } + + skb = dev_alloc_skb(pkt_len + 2); + if (skb == NULL) { + dev->stats.rx_dropped++; + goto out; + } + skb_reserve(skb, 2); + skb_copy_to_linear_data(skb, + &card->rx_buffer[bufferoffset / 4], + pkt_len); + skb_put(skb, pkt_len); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + +out: + /* give the buffer back to the card */ + card->rx_buffer[4*descnr] = cpu_to_le32(0x80000000); + trigger_receive(card); + } +} + + +/* Bufferoffset is in BYTES */ +static void +investigate_write_descriptor(struct net_device *dev, + struct xircom_private *card, + int descnr, unsigned int bufferoffset) +{ + int status; + + status = le32_to_cpu(card->tx_buffer[4*descnr]); +#if 0 + if (status & 0x8000) { /* Major error */ + pr_err("Major transmit error status %x\n", status); + card->tx_buffer[4*descnr] = 0; + netif_wake_queue (dev); + } +#endif + if (status > 0) { /* bit 31 is 0 when done */ + if (card->tx_skb[descnr]!=NULL) { + dev->stats.tx_bytes += card->tx_skb[descnr]->len; + dev_kfree_skb_irq(card->tx_skb[descnr]); + } + card->tx_skb[descnr] = NULL; + /* Bit 8 in the status field is 1 if there was a collision */ + if (status & (1 << 8)) + dev->stats.collisions++; + card->tx_buffer[4*descnr] = 0; /* descriptor is free again */ + netif_wake_queue (dev); + dev->stats.tx_packets++; + } +} + +static int __init xircom_init(void) +{ + return pci_register_driver(&xircom_ops); +} + +static void __exit xircom_exit(void) +{ + pci_unregister_driver(&xircom_ops); +} + +module_init(xircom_init) +module_exit(xircom_exit) + |