diff options
Diffstat (limited to 'arch/arm/mach-omap1/usb.c')
| -rw-r--r-- | arch/arm/mach-omap1/usb.c | 116 |
1 files changed, 115 insertions, 1 deletions
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index e61afd92276..65f88176fba 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -27,7 +27,8 @@ #include <asm/irq.h> #include <plat/mux.h> -#include <plat/usb.h> + +#include <mach/usb.h> #include "common.h" @@ -55,6 +56,119 @@ #define INT_USB_IRQ_HGEN INT_USB_HHC_1 #define INT_USB_IRQ_OTG IH2_BASE + 8 +#ifdef CONFIG_ARCH_OMAP_OTG + +void __init +omap_otg_init(struct omap_usb_config *config) +{ + u32 syscon; + int alt_pingroup = 0; + + /* NOTE: no bus or clock setup (yet?) */ + + syscon = omap_readl(OTG_SYSCON_1) & 0xffff; + if (!(syscon & OTG_RESET_DONE)) + pr_debug("USB resets not complete?\n"); + + //omap_writew(0, OTG_IRQ_EN); + + /* pin muxing and transceiver pinouts */ + if (config->pins[0] > 2) /* alt pingroup 2 */ + alt_pingroup = 1; + syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); + syscon |= config->usb1_init(config->pins[1]); + syscon |= config->usb2_init(config->pins[2], alt_pingroup); + pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); + omap_writel(syscon, OTG_SYSCON_1); + + syscon = config->hmc_mode; + syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */; +#ifdef CONFIG_USB_OTG + if (config->otg) + syscon |= OTG_EN; +#endif + if (cpu_class_is_omap1()) + pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", + omap_readl(USB_TRANSCEIVER_CTRL)); + pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); + omap_writel(syscon, OTG_SYSCON_2); + + printk("USB: hmc %d", config->hmc_mode); + if (!alt_pingroup) + printk(", usb2 alt %d wires", config->pins[2]); + else if (config->pins[0]) + printk(", usb0 %d wires%s", config->pins[0], + is_usb0_device(config) ? " (dev)" : ""); + if (config->pins[1]) + printk(", usb1 %d wires", config->pins[1]); + if (!alt_pingroup && config->pins[2]) + printk(", usb2 %d wires", config->pins[2]); + if (config->otg) + printk(", Mini-AB on usb%d", config->otg - 1); + printk("\n"); + + if (cpu_class_is_omap1()) { + u16 w; + + /* leave USB clocks/controllers off until needed */ + w = omap_readw(ULPD_SOFT_REQ); + w &= ~SOFT_USB_CLK_REQ; + omap_writew(w, ULPD_SOFT_REQ); + + w = omap_readw(ULPD_CLOCK_CTRL); + w &= ~USB_MCLK_EN; + w |= DIS_USB_PVCI_CLK; + omap_writew(w, ULPD_CLOCK_CTRL); + } + syscon = omap_readl(OTG_SYSCON_1); + syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; + +#ifdef CONFIG_USB_GADGET_OMAP + if (config->otg || config->register_dev) { + struct platform_device *udc_device = config->udc_device; + int status; + + syscon &= ~DEV_IDLE_EN; + udc_device->dev.platform_data = config; + status = platform_device_register(udc_device); + if (status) + pr_debug("can't register UDC device, %d\n", status); + } +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + if (config->otg || config->register_host) { + struct platform_device *ohci_device = config->ohci_device; + int status; + + syscon &= ~HST_IDLE_EN; + ohci_device->dev.platform_data = config; + status = platform_device_register(ohci_device); + if (status) + pr_debug("can't register OHCI device, %d\n", status); + } +#endif + +#ifdef CONFIG_USB_OTG + if (config->otg) { + struct platform_device *otg_device = config->otg_device; + int status; + + syscon &= ~OTG_IDLE_EN; + otg_device->dev.platform_data = config; + status = platform_device_register(otg_device); + if (status) + pr_debug("can't register OTG device, %d\n", status); + } +#endif + pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); + omap_writel(syscon, OTG_SYSCON_1); +} + +#else +void omap_otg_init(struct omap_usb_config *config) {} +#endif + #ifdef CONFIG_USB_GADGET_OMAP static struct resource udc_resources[] = { |