diff options
35 files changed, 1069 insertions, 822 deletions
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt new file mode 100644 index 00000000000..8522bfbccfd --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt @@ -0,0 +1,17 @@ +Freescale i.MX PWM controller + +Required properties: +- compatible: should be "fsl,<soc>-pwm" +- reg: physical base address and length of the controller's registers +- #pwm-cells: should be 2. The first cell specifies the per-chip index + of the PWM to use and the second cell is the period in nanoseconds. +- interrupts: The interrupt for the pwm controller + +Example: + +pwm1: pwm@53fb4000 { + #pwm-cells = <2>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb4000 0x4000>; + interrupts = <61>; +}; diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt index 11963e4d6bc..9e3f8f1d46a 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt @@ -4,7 +4,7 @@ Required properties: - compatible: should be "fsl,imx23-pwm" - reg: physical base address and length of the controller's registers - #pwm-cells: should be 2. The first cell specifies the per-chip index - of the PWM to use and the second cell is the duty cycle in nanoseconds. + of the PWM to use and the second cell is the period in nanoseconds. - fsl,pwm-number: the number of PWM devices Example: diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index bbbeedb4ec0..01438ecd662 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -7,7 +7,7 @@ Required properties: - reg: physical base address and length of the controller's registers - #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The first cell specifies the per-chip index of the PWM to use and the second - cell is the duty cycle in nanoseconds. + cell is the period in nanoseconds. Example: diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 950856bd2e3..43cff70465a 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -284,3 +284,7 @@ CLOCK PINCTRL devm_pinctrl_get() devm_pinctrl_put() + +PWM + devm_pwm_get() + devm_pwm_put() diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt index 554290ebab9..7d2b4c9b544 100644 --- a/Documentation/pwm.txt +++ b/Documentation/pwm.txt @@ -36,7 +36,8 @@ Legacy users can request a PWM device using pwm_request() and free it after usage with pwm_free(). New users should use the pwm_get() function and pass to it the consumer -device or a consumer name. pwm_put() is used to free the PWM device. +device or a consumer name. pwm_put() is used to free the PWM device. Managed +variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist. After being requested a PWM has to be configured using: diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h index 564ab81d6cd..163e81db880 100644 --- a/arch/mips/include/asm/mach-jz4740/platform.h +++ b/arch/mips/include/asm/mach-jz4740/platform.h @@ -31,6 +31,7 @@ extern struct platform_device jz4740_pcm_device; extern struct platform_device jz4740_codec_device; extern struct platform_device jz4740_adc_device; extern struct platform_device jz4740_wdt_device; +extern struct platform_device jz4740_pwm_device; void jz4740_serial_device_register(void); diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h index 9baa03ce748..a7759fb1f73 100644 --- a/arch/mips/include/asm/mach-jz4740/timer.h +++ b/arch/mips/include/asm/mach-jz4740/timer.h @@ -16,7 +16,120 @@ #ifndef __ASM_MACH_JZ4740_TIMER #define __ASM_MACH_JZ4740_TIMER +#define JZ_REG_TIMER_STOP 0x0C +#define JZ_REG_TIMER_STOP_SET 0x1C +#define JZ_REG_TIMER_STOP_CLEAR 0x2C +#define JZ_REG_TIMER_ENABLE 0x00 +#define JZ_REG_TIMER_ENABLE_SET 0x04 +#define JZ_REG_TIMER_ENABLE_CLEAR 0x08 +#define JZ_REG_TIMER_FLAG 0x10 +#define JZ_REG_TIMER_FLAG_SET 0x14 +#define JZ_REG_TIMER_FLAG_CLEAR 0x18 +#define JZ_REG_TIMER_MASK 0x20 +#define JZ_REG_TIMER_MASK_SET 0x24 +#define JZ_REG_TIMER_MASK_CLEAR 0x28 + +#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x30) +#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x34) +#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x38) +#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x3C) + +#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10) +#define JZ_TIMER_IRQ_FULL(x) BIT(x) + +#define JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN BIT(9) +#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW BIT(8) +#define JZ_TIMER_CTRL_PWM_ENABLE BIT(7) +#define JZ_TIMER_CTRL_PRESCALE_MASK 0x1c +#define JZ_TIMER_CTRL_PRESCALE_OFFSET 0x3 +#define JZ_TIMER_CTRL_PRESCALE_1 (0 << 3) +#define JZ_TIMER_CTRL_PRESCALE_4 (1 << 3) +#define JZ_TIMER_CTRL_PRESCALE_16 (2 << 3) +#define JZ_TIMER_CTRL_PRESCALE_64 (3 << 3) +#define JZ_TIMER_CTRL_PRESCALE_256 (4 << 3) +#define JZ_TIMER_CTRL_PRESCALE_1024 (5 << 3) + +#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET) + +#define JZ_TIMER_CTRL_SRC_EXT BIT(2) +#define JZ_TIMER_CTRL_SRC_RTC BIT(1) +#define JZ_TIMER_CTRL_SRC_PCLK BIT(0) + +extern void __iomem *jz4740_timer_base; +void __init jz4740_timer_init(void); + void jz4740_timer_enable_watchdog(void); void jz4740_timer_disable_watchdog(void); +static inline void jz4740_timer_stop(unsigned int timer) +{ + writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); +} + +static inline void jz4740_timer_start(unsigned int timer) +{ + writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); +} + +static inline bool jz4740_timer_is_enabled(unsigned int timer) +{ + return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer); +} + +static inline void jz4740_timer_enable(unsigned int timer) +{ + writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET); +} + +static inline void jz4740_timer_disable(unsigned int timer) +{ + writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR); +} + +static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period) +{ + writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer)); +} + +static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty) +{ + writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer)); +} + +static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count) +{ + writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer)); +} + +static inline uint16_t jz4740_timer_get_count(unsigned int timer) +{ + return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer)); +} + +static inline void jz4740_timer_ack_full(unsigned int timer) +{ + writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR); +} + +static inline void jz4740_timer_irq_full_enable(unsigned int timer) +{ + writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR); + writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR); +} + +static inline void jz4740_timer_irq_full_disable(unsigned int timer) +{ + writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET); +} + +static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl) +{ + writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer)); +} + +static inline uint16_t jz4740_timer_get_ctrl(unsigned int timer) +{ + return readw(jz4740_timer_base + JZ_REG_TIMER_CTRL(timer)); +} + #endif diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig index 3e7141f0746..46890305388 100644 --- a/arch/mips/jz4740/Kconfig +++ b/arch/mips/jz4740/Kconfig @@ -7,6 +7,3 @@ config JZ4740_QI_LB60 bool "Qi Hardware Ben NanoNote" endchoice - -config HAVE_PWM - bool diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile index e44abea9c20..63bad0e491d 100644 --- a/arch/mips/jz4740/Makefile +++ b/arch/mips/jz4740/Makefile @@ -5,7 +5,7 @@ # Object file lists. obj-y += prom.o irq.o time.o reset.o setup.o dma.o \ - gpio.o clock.o platform.o timer.o pwm.o serial.o + gpio.o clock.o platform.o timer.o serial.o obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index 9a3d9de4d04..43d964d3628 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -437,6 +437,7 @@ static struct platform_device *jz_platform_devices[] __initdata = { &jz4740_codec_device, &jz4740_rtc_device, &jz4740_adc_device, + &jz4740_pwm_device, &qi_lb60_gpio_keys, &qi_lb60_pwm_beeper, &qi_lb60_charger_device, diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c index e342ed4cbd4..6d14dcdbd90 100644 --- a/arch/mips/jz4740/platform.c +++ b/arch/mips/jz4740/platform.c @@ -323,3 +323,9 @@ struct platform_device jz4740_wdt_device = { .num_resources = ARRAY_SIZE(jz4740_wdt_resources), .resource = jz4740_wdt_resources, }; + +/* PWM */ +struct platform_device jz4740_pwm_device = { + .name = "jz4740-pwm", + .id = -1, +}; diff --git a/arch/mips/jz4740/pwm.c b/arch/mips/jz4740/pwm.c deleted file mode 100644 index a26a6faec9a..00000000000 --- a/arch/mips/jz4740/pwm.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 platform PWM support - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/kernel.h> - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/pwm.h> -#include <linux/gpio.h> - -#include <asm/mach-jz4740/gpio.h> -#include "timer.h" - -static struct clk *jz4740_pwm_clk; - -DEFINE_MUTEX(jz4740_pwm_mutex); - -struct pwm_device { - unsigned int id; - unsigned int gpio; - bool used; -}; - -static struct pwm_device jz4740_pwm_list[] = { - { 2, JZ_GPIO_PWM2, false }, - { 3, JZ_GPIO_PWM3, false }, - { 4, JZ_GPIO_PWM4, false }, - { 5, JZ_GPIO_PWM5, false }, - { 6, JZ_GPIO_PWM6, false }, - { 7, JZ_GPIO_PWM7, false }, -}; - -struct pwm_device *pwm_request(int id, const char *label) -{ - int ret = 0; - struct pwm_device *pwm; - - if (id < 2 || id > 7 || !jz4740_pwm_clk) - return ERR_PTR(-ENODEV); - - mutex_lock(&jz4740_pwm_mutex); - - pwm = &jz4740_pwm_list[id - 2]; - if (pwm->used) - ret = -EBUSY; - else - pwm->used = true; - - mutex_unlock(&jz4740_pwm_mutex); - - if (ret) - return ERR_PTR(ret); - - ret = gpio_request(pwm->gpio, label); - - if (ret) { - printk(KERN_ERR "Failed to request pwm gpio: %d\n", ret); - pwm->used = false; - return ERR_PTR(ret); - } - - jz_gpio_set_function(pwm->gpio, JZ_GPIO_FUNC_PWM); - - jz4740_timer_start(id); - - return pwm; -} - -void pwm_free(struct pwm_device *pwm) -{ - pwm_disable(pwm); - jz4740_timer_set_ctrl(pwm->id, 0); - - jz_gpio_set_function(pwm->gpio, JZ_GPIO_FUNC_NONE); - gpio_free(pwm->gpio); - - jz4740_timer_stop(pwm->id); - - pwm->used = false; -} - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long long tmp; - unsigned long period, duty; - unsigned int prescaler = 0; - unsigned int id = pwm->id; - uint16_t ctrl; - bool is_enabled; - - if (duty_ns < 0 || duty_ns > period_ns) - return -EINVAL; - - tmp = (unsigned long long)clk_get_rate(jz4740_pwm_clk) * period_ns; - do_div(tmp, 1000000000); - period = tmp; - - while (period > 0xffff && prescaler < 6) { - period >>= 2; - ++prescaler; - } - - if (prescaler == 6) - return -EINVAL; - - tmp = (unsigned long long)period * duty_ns; - do_div(tmp, period_ns); - duty = period - tmp; - - if (duty >= period) - duty = period - 1; - - is_enabled = jz4740_timer_is_enabled(id); - if (is_enabled) - pwm_disable(pwm); - - jz4740_timer_set_count(id, 0); - jz4740_timer_set_duty(id, duty); - jz4740_timer_set_period(id, period); - - ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT | - JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN; - - jz4740_timer_set_ctrl(id, ctrl); - - if (is_enabled) - pwm_enable(pwm); - - return 0; -} - -int pwm_enable(struct pwm_device *pwm) -{ - uint32_t ctrl = jz4740_timer_get_ctrl(pwm->id); - - ctrl |= JZ_TIMER_CTRL_PWM_ENABLE; - jz4740_timer_set_ctrl(pwm->id, ctrl); - jz4740_timer_enable(pwm->id); - - return 0; -} - -void pwm_disable(struct pwm_device *pwm) -{ - uint32_t ctrl = jz4740_timer_get_ctrl(pwm->id); - - ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE; - jz4740_timer_disable(pwm->id); - jz4740_timer_set_ctrl(pwm->id, ctrl); -} - -static int __init jz4740_pwm_init(void) -{ - int ret = 0; - - jz4740_pwm_clk = clk_get(NULL, "ext"); - - if (IS_ERR(jz4740_pwm_clk)) { - ret = PTR_ERR(jz4740_pwm_clk); - jz4740_pwm_clk = NULL; - } - - return ret; -} -subsys_initcall(jz4740_pwm_init); diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c index f83c2dd07a2..39bb4bbf43e 100644 --- a/arch/mips/jz4740/time.c +++ b/arch/mips/jz4740/time.c @@ -20,10 +20,10 @@ #include <linux/clockchips.h> #include <asm/mach-jz4740/irq.h> +#include <asm/mach-jz4740/timer.h> #include <asm/time.h> #include "clock.h" -#include "timer.h" #define TIMER_CLOCKEVENT 0 #define TIMER_CLOCKSOURCE 1 diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c index 654d5c3900b..22f11d73a17 100644 --- a/arch/mips/jz4740/timer.c +++ b/arch/mips/jz4740/timer.c @@ -17,11 +17,11 @@ #include <linux/kernel.h> #include <linux/module.h> -#include "timer.h" - #include <asm/mach-jz4740/base.h> +#include <asm/mach-jz4740/timer.h> void __iomem *jz4740_timer_base; +EXPORT_SYMBOL_GPL(jz4740_timer_base); void jz4740_timer_enable_watchdog(void) { diff --git a/arch/mips/jz4740/timer.h b/arch/mips/jz4740/timer.h deleted file mode 100644 index fca3994f2e6..00000000000 --- a/arch/mips/jz4740/timer.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 platform timer support - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef __MIPS_JZ4740_TIMER_H__ -#define __MIPS_JZ4740_TIMER_H__ - -#include <linux/module.h> -#include <linux/io.h> - -#define JZ_REG_TIMER_STOP 0x0C -#define JZ_REG_TIMER_STOP_SET 0x1C -#define JZ_REG_TIMER_STOP_CLEAR 0x2C -#define JZ_REG_TIMER_ENABLE 0x00 -#define JZ_REG_TIMER_ENABLE_SET 0x04 -#define JZ_REG_TIMER_ENABLE_CLEAR 0x08 -#define JZ_REG_TIMER_FLAG 0x10 -#define JZ_REG_TIMER_FLAG_SET 0x14 -#define JZ_REG_TIMER_FLAG_CLEAR 0x18 -#define JZ_REG_TIMER_MASK 0x20 -#define JZ_REG_TIMER_MASK_SET 0x24 -#define JZ_REG_TIMER_MASK_CLEAR 0x28 - -#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x30) -#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x34) -#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x38) -#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x3C) - -#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10) -#define JZ_TIMER_IRQ_FULL(x) BIT(x) - -#define JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN BIT(9) -#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW BIT(8) -#define JZ_TIMER_CTRL_PWM_ENABLE BIT(7) -#define JZ_TIMER_CTRL_PRESCALE_MASK 0x1c -#define JZ_TIMER_CTRL_PRESCALE_OFFSET 0x3 -#define JZ_TIMER_CTRL_PRESCALE_1 (0 << 3) -#define JZ_TIMER_CTRL_PRESCALE_4 (1 << 3) -#define JZ_TIMER_CTRL_PRESCALE_16 (2 << 3) -#define JZ_TIMER_CTRL_PRESCALE_64 (3 << 3) -#define JZ_TIMER_CTRL_PRESCALE_256 (4 << 3) -#define JZ_TIMER_CTRL_PRESCALE_1024 (5 << 3) - -#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET) - -#define JZ_TIMER_CTRL_SRC_EXT BIT(2) -#define JZ_TIMER_CTRL_SRC_RTC BIT(1) -#define JZ_TIMER_CTRL_SRC_PCLK BIT(0) - -extern void __iomem *jz4740_timer_base; -void __init jz4740_timer_init(void); - -static inline void jz4740_timer_stop(unsigned int timer) -{ - writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); -} - -static inline void jz4740_timer_start(unsigned int timer) -{ - writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); -} - -static inline bool jz4740_timer_is_enabled(unsigned int timer) -{ - return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer); -} - -static inline void jz4740_timer_enable(unsigned int timer) -{ - writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET); -} - -static inline void jz4740_timer_disable(unsigned int timer) -{ - writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR); -} - - -static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period) -{ - writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer)); -} - -static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty) -{ - writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer)); -} - -static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count) -{ - writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer)); -} - -static inline uint16_t jz4740_timer_get_count(unsigned int timer) -{ - return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer)); -} - -static inline void jz4740_timer_ack_full(unsigned int timer) -{ - writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR); -} - -static inline void jz4740_timer_irq_full_enable(unsigned int timer) -{ - writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR); - writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR); -} - -static inline void jz4740_timer_irq_full_disable(unsigned int timer) -{ - writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET); -} - -static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl) -{ - writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer)); -} - -static inline uint16_t jz4740_timer_get_ctrl(unsigned int timer) -{ - return readw(jz4740_timer_base + JZ_REG_TIMER_CTRL(timer)); -} - -#endif diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 1e638e75a6b..35ee2bf6635 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -21,9 +21,6 @@ config UNICORE32 designs licensed by PKUnity Ltd. Please see web page at <http://www.pkunity.com/>. -config HAVE_PWM - bool - config GENERIC_GPIO def_bool y @@ -106,7 +103,8 @@ config PUV3_DB0913 config PUV3_NB0916 bool "NetBook board (0916)" - select HAVE_PWM + select PWM + select PWM_PUV3 config PUV3_SMW0919 bool "Security Mini-Workstation board (0919)" @@ -220,12 +218,6 @@ config PUV3_GPIO select GPIO_SYSFS if EXPERIMENTAL default y -config PUV3_PWM - tristate - default BACKLIGHT_PWM - help - Enable support for NB0916 PWM controllers - if PUV3_NB0916 menu "PKUnity NetBook-0916 Features" diff --git a/arch/unicore32/include/mach/regs-ost.h b/arch/unicore32/include/mach/regs-ost.h index 7b91fe698ee..4a85fb46384 100644 --- a/arch/unicore32/include/mach/regs-ost.h +++ b/arch/unicore32/include/mach/regs-ost.h @@ -33,18 +33,16 @@ * Interrupt Enable Reg OST_OIER */ #define OST_OIER (PKUNITY_OST_BASE + 0x001C) + /* - * PWM Pulse Width Control Reg OST_PWMPWCR - */ -#define OST_PWMPWCR (PKUNITY_OST_BASE + 0x0080) -/* - * PWM Duty Cycle Control Reg OST_PWMDCCR - */ -#define OST_PWMDCCR (PKUNITY_OST_BASE + 0x0084) -/* - * PWM Period Control Reg OST_PWMPCR + * PWM Registers: IO base address: PKUNITY_OST_BASE + 0x80 + * PWCR: Pulse Width Control Reg + * DCCR: Duty Cycle Control Reg + * PCR: Period Control Reg */ -#define OST_PWMPCR (PKUNITY_OST_BASE + 0x0088) +#define OST_PWM_PWCR (0x00) +#define OST_PWM_DCCR (0x04) +#define OST_PWM_PCR (0x08) /* * Match detected 0 OST_OSSR_M0 diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile index 32401015695..fa497e0efe5 100644 --- a/arch/unicore32/kernel/Makefile +++ b/arch/unicore32/kernel/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_UNICORE_FPU_F64) += fpu-ucf64.o obj-$(CONFIG_ARCH_PUV3) += clock.o irq.o time.o obj-$(CONFIG_PUV3_GPIO) += gpio.o -obj-$(CONFIG_PUV3_PWM) += pwm.o obj-$(CONFIG_PUV3_PM) += pm.o sleep.o obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate_asm.o diff --git a/arch/unicore32/kernel/pwm.c b/arch/unicore32/kernel/pwm.c deleted file mode 100644 index 4615d51e3ba..00000000000 --- a/arch/unicore32/kernel/pwm.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * linux/arch/unicore32/kernel/pwm.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/pwm.h> - -#include <asm/div64.h> -#include <mach/hardware.h> - -struct pwm_device { - struct list_head node; - struct platform_device *pdev; - - const char *label; - struct clk *clk; - int clk_enabled; - - unsigned int use_count; - unsigned int pwm_id; -}; - -/* - * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE - * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE - */ -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long long c; - unsigned long period_cycles, prescale, pv, dc; - - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) - return -EINVAL; - - c = clk_get_rate(pwm->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - if (period_cycles < 1) - period_cycles = 1; - prescale = (period_cycles - 1) / 1024; - pv = period_cycles / (prescale + 1) - 1; - - if (prescale > 63) - return -EINVAL; - - if (duty_ns == period_ns) - dc = OST_PWMDCCR_FDCYCLE; - else - dc = (pv + 1) * duty_ns / period_ns; - - /* NOTE: the clock to PWM has to be enabled first - * before writing to the registers - */ - clk_enable(pwm->clk); - OST_PWMPWCR = prescale; - OST_PWMDCCR = pv - dc; - OST_PWMPCR = pv; - clk_disable(pwm->clk); - - return 0; -} -EXPORT_SYMBOL(pwm_config); - -int pwm_enable(struct pwm_device *pwm) -{ - int rc = 0; - - if (!pwm->clk_enabled) { - rc = clk_enable(pwm->clk); - if (!rc) - pwm->clk_enabled = 1; - } - return rc; -} -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - if (pwm->clk_enabled) { - clk_disable(pwm->clk); - pwm->clk_enabled = 0; - } -} -EXPORT_SYMBOL(pwm_disable); - -static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_list); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int found = 0; - - mutex_lock(&pwm_lock); - - list_for_each_entry(pwm, &pwm_list, node) { - if (pwm->pwm_id == pwm_id) { - found = 1; - break; - } - } - - if (found) { - if (pwm->use_count == 0) { - pwm->use_count++; - pwm->label = label; - } else - pwm = ERR_PTR(-EBUSY); - } else - pwm = ERR_PTR(-ENOENT); - - mutex_unlock(&pwm_lock); - return pwm; -} -EXPORT_SYMBOL(pwm_request); - -void pwm_free(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - - if (pwm->use_count) { - pwm->use_count--; - pwm->label = NULL; - } else - pr_warning("PWM device already freed\n"); - - mutex_unlock(&pwm_lock); -} -EXPORT_SYMBOL(pwm_free); - -static inline void __add_pwm(struct pwm_device *pwm) -{ - mutex_lock(&pwm_lock); - list_add_tail(&pwm->node, &pwm_list); - mutex_unlock(&pwm_lock); -} - -static struct pwm_device *pwm_probe(struct platform_device *pdev, - unsigned int pwm_id, struct pwm_device *parent_pwm) -{ - struct pwm_device *pwm; - struct resource *r; - int ret = 0; - - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return ERR_PTR(-ENOMEM); - } - - pwm->clk = clk_get(NULL, "OST_CLK"); - if (IS_ERR(pwm->clk)) { - ret = PTR_ERR(pwm->clk); - goto err_free; - } - pwm->clk_enabled = 0; - - pwm->use_count = 0; - pwm->pwm_id = pwm_id; - pwm->pdev = pdev; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - - r = request_mem_region(r->start, resource_size(r), pdev->name); - if (r == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; - } - - __add_pwm(pwm); - platform_set_drvdata(pdev, pwm); - return pwm; - -err_free_clk: - clk_put(pwm->clk); -err_free: - kfree(pwm); - return ERR_PTR(ret); -} - -static int __devinit puv3_pwm_probe(struct platform_device *pdev) -{ - struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL); - - if (IS_ERR(pwm)) - return PTR_ERR(pwm); - - return 0; -} - -static int __devexit pwm_remove(struct platform_device *pdev) -{ - struct pwm_device *pwm; - struct resource *r; - - pwm = platform_get_drvdata(pdev); - if (pwm == NULL) - return -ENODEV; - - mutex_lock(&pwm_lock); - list_del(&pwm->node); - mutex_unlock(&pwm_lock); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, resource_size(r)); - - clk_put(pwm->clk); - kfree(pwm); - return 0; -} - -static struct platform_driver puv3_pwm_driver = { - .driver = { - .name = "PKUnity-v3-PWM", - }, - .probe = puv3_pwm_probe, - .remove = __devexit_p(pwm_remove), -}; - -static int __init pwm_init(void) -{ - int ret = 0; - - ret = platform_driver_register(&puv3_pwm_driver); - if (ret) { - printk(KERN_ERR "failed to register puv3_pwm_driver\n"); - return ret; - } - - return ret; -} -arch_initcall(pwm_init); - -static void __exit pwm_exit(void) -{ - platform_driver_unregister(&puv3_pwm_driver); -} -module_exit(pwm_exit); - -MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 99c73352c43..b151b7c1bd5 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -60,16 +60,6 @@ config ATMEL_PWM purposes including software controlled power-efficient backlights on LCD displays, motor control, and waveform generation. -config AB8500_PWM - bool "AB8500 PWM support" - depends on AB8500_CORE && ARCH_U8500 - select HAVE_PWM - depends on !PWM - help - This driver exports functions to enable/disble/config/free Pulse - Width Modulation in the Analog Baseband Chip AB8500. - It is used by led and backlight driver to control the intensity. - config ATMEL_TCLIB bool "Atmel AT32/AT91 Timer/Counter Library" depends on (AVR32 || ARCH_AT91) diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index b88df7a350b..2129377c0de 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o obj-$(CONFIG_PCH_PHUB) += pch_phub.o obj-y += ti-st/ -obj-$(CONFIG_AB8500_PWM) += ab8500-pwm.o obj-y += lis3lv02d/ obj-y += carma/ obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index d7c6b83097c..ed81720e7b2 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -1,6 +1,5 @@ menuconfig PWM bool "Pulse-Width Modulation (PWM) Support" - depends on !MACH_JZ4740 && !PUV3_PWM help Generic Pulse-Width Modulation (PWM) support. @@ -29,6 +28,15 @@ menuconfig PWM if PWM +config PWM_AB8500 + tristate "AB8500 PWM support" + depends on AB8500_CORE && ARCH_U8500 + help + Generic PWM framework driver for Analog Baseband AB8500. + + To compile this driver as a module, choose M here: the module + will be called pwm-ab8500. + config PWM_BFIN tristate "Blackfin PWM support" depends on BFIN_GPTIMERS @@ -47,6 +55,16 @@ config PWM_IMX To compile this driver as a module, choose M here: the module will be called pwm-imx. +config PWM_JZ4740 + tristate "Ingenic JZ4740 PWM support" + depends on MACH_JZ4740 + help + Generic PWM framework driver for Ingenic JZ4740 based + machines. + + To compile this driver as a module, choose M here: the module + will be called pwm-jz4740. + config PWM_LPC32XX tristate "LPC32XX PWM support" depends on ARCH_LPC32XX @@ -67,6 +85,15 @@ config PWM_MXS To compile this driver as a module, choose M here: the module will be called pwm-mxs. +config PWM_PUV3 + tristate "PKUnity NetBook-0916 PWM support" + depends on ARCH_PUV3 + help + Generic PWM framework driver for PKUnity NetBook-0916. + + To compile this driver as a module, choose M here: the module + will be called pwm-puv3. + config PWM_PXA tristate "PXA PWM support" depends on ARCH_PXA diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 78f123dca30..acfe4821c58 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -1,8 +1,11 @@ obj-$(CONFIG_PWM) += core.o +obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o obj-$(CONFIG_PWM_IMX) += pwm-imx.o +obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o obj-$(CONFIG_PWM_MXS) += pwm-mxs.o +obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o obj-$(CONFIG_PWM_PXA) += pwm-pxa.o obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index c6e05078d3a..f5acdaa5270 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -371,7 +371,7 @@ EXPORT_SYMBOL_GPL(pwm_free); */ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) { - if (!pwm || period_ns == 0 || duty_ns > period_ns) + if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns) return -EINVAL; return pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns); @@ -379,6 +379,28 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) EXPORT_SYMBOL_GPL(pwm_config); /** + * pwm_set_polarity() - configure the polarity of a PWM signal + * @pwm: PWM device + * @polarity: new polarity of the PWM signal + * + * Note that the polarity cannot be configured while the PWM device is enabled + */ +int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity) +{ + if (!pwm || !pwm->chip->ops) + return -EINVAL; + + if (!pwm->chip->ops->set_polarity) + return -ENOSYS; + + if (test_bit(PWMF_ENABLED, &pwm->flags)) + return -EBUSY; + + return pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity); +} +EXPORT_SYMBOL_GPL(pwm_set_polarity); + +/** * pwm_enable() - start a PWM output toggling * @pwm: PWM device */ @@ -624,6 +646,64 @@ out: } EXPORT_SYMBOL_GPL(pwm_put); +static void devm_pwm_release(struct device *dev, void *res) +{ + pwm_put(*(struct pwm_device **)res); +} + +/** + * devm_pwm_get() - resource managed pwm_get() + * @dev: device for PWM consumer + * @con_id: consumer name + * + * This function performs like pwm_get() but the acquired PWM device will + * automatically be released on driver detach. + */ +struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id) +{ + struct pwm_device **ptr, *pwm; + + ptr = devres_alloc(devm_pwm_release, sizeof(**ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + pwm = pwm_get(dev, con_id); + if (!IS_ERR(pwm)) { + *ptr = pwm; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return pwm; +} +EXPORT_SYMBOL_GPL(devm_pwm_get); + +static int devm_pwm_match(struct device *dev, void *res, void *data) +{ + struct pwm_device **p = res; + + if (WARN_ON(!p || !*p)) + return 0; + + return *p == data; +} + +/** + * devm_pwm_put() - resource managed pwm_put() + * @dev: device for PWM consumer + * @pwm: PWM device + * + * Release a PWM previously allocated using devm_pwm_get(). Calling this + * function is usually not needed because devm-allocated resources are + * automatically released on driver detach. + */ +void devm_pwm_put(struct device *dev, struct pwm_device *pwm) +{ + WARN_ON(devres_release(dev, devm_pwm_release, devm_pwm_match, pwm)); +} +EXPORT_SYMBOL_GPL(devm_pwm_put); + #ifdef CONFIG_DEBUG_FS static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s) { diff --git a/drivers/misc/ab8500-pwm.c b/drivers/pwm/pwm-ab8500.c index d7a9aa14e5d..cfb72ca873d 100644 --- a/drivers/misc/ab8500-pwm.c +++ b/drivers/pwm/pwm-ab8500.c @@ -24,16 +24,12 @@ #define ENABLE_PWM 1 #define DISABLE_PWM 0 -struct pwm_device { - struct device *dev; - struct list_head node; - const char *label; - unsigned int pwm_id; +struct ab8500_pwm_chip { + struct pwm_chip chip; }; -static LIST_HEAD(pwm_list); - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +static int ab8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) { int ret = 0; unsigned int higher_val, lower_val; @@ -50,95 +46,94 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) */ higher_val = ((duty_ns & 0x0300) >> 8); - reg = AB8500_PWM_OUT_CTRL1_REG + ((pwm->pwm_id - 1) * 2); + reg = AB8500_PWM_OUT_CTRL1_REG + ((chip->base - 1) * 2); - ret = abx500_set_register_interruptible(pwm->dev, AB8500_MISC, + ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC, reg, (u8)lower_val); if (ret < 0) return ret; - ret = abx500_set_register_interruptible(pwm->dev, AB8500_MISC, + ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC, (reg + 1), (u8)higher_val); return ret; } -EXPORT_SYMBOL(pwm_config); -int pwm_enable(struct pwm_device *pwm) +static int ab8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { int ret; - ret = abx500_mask_and_set_register_interruptible(pwm->dev, + ret = abx500_mask_and_set_register_interruptible(chip->dev, AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG, - 1 << (pwm->pwm_id-1), ENABLE_PWM); + 1 << (chip->base - 1), ENABLE_PWM); if (ret < 0) - dev_err(pwm->dev, "%s: Failed to disable PWM, Error %d\n", + dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n", pwm->label, ret); return ret; } -EXPORT_SYMBOL(pwm_enable); -void pwm_disable(struct pwm_device *pwm) +static void ab8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { int ret; - ret = abx500_mask_and_set_register_interruptible(pwm->dev, + ret = abx500_mask_and_set_register_interruptible(chip->dev, AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG, - 1 << (pwm->pwm_id-1), DISABLE_PWM); + 1 << (chip->base - 1), DISABLE_PWM); if (ret < 0) - dev_err(pwm->dev, "%s: Failed to disable PWM, Error %d\n", + dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n", pwm->label, ret); return; } -EXPORT_SYMBOL(pwm_disable); - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - - list_for_each_entry(pwm, &pwm_list, node) { - if (pwm->pwm_id == pwm_id) { - pwm->label = label; - pwm->pwm_id = pwm_id; - return pwm; - } - } - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(pwm_request); -void pwm_free(struct pwm_device *pwm) -{ - pwm_disable(pwm); -} -EXPORT_SYMBOL(pwm_free); +static const struct pwm_ops ab8500_pwm_ops = { + .config = ab8500_pwm_config, + .enable = ab8500_pwm_enable, + .disable = ab8500_pwm_disable, +}; static int __devinit ab8500_pwm_probe(struct platform_device *pdev) { - struct pwm_device *pwm; + struct ab8500_pwm_chip *ab8500; + int err; + /* * Nothing to be done in probe, this is required to get the * device which is required for ab8500 read and write */ - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); - if (pwm == NULL) { + ab8500 = kzalloc(sizeof(*ab8500), GFP_KERNEL); + if (ab8500 == NULL) { dev_err(&pdev->dev, "failed to allocate memory\n"); return -ENOMEM; } - pwm->dev = &pdev->dev; - pwm->pwm_id = pdev->id; - list_add_tail(&pwm->node, &pwm_list); - platform_set_drvdata(pdev, pwm); - dev_dbg(pwm->dev, "pwm probe successful\n"); + + ab8500->chip.dev = &pdev->dev; + ab8500->chip.ops = &ab8500_pwm_ops; + ab8500->chip.base = pdev->id; + ab8500->chip.npwm = 1; + + err = pwmchip_add(&ab8500->chip); + if (err < 0) { + kfree(ab8500); + return err; + } + + dev_dbg(&pdev->dev, "pwm probe successful\n"); + platform_set_drvdata(pdev, ab8500); + return 0; } static int __devexit ab8500_pwm_remove(struct platform_device *pdev) { - struct pwm_device *pwm = platform_get_drvdata(pdev); - list_del(&pwm->node); + struct ab8500_pwm_chip *ab8500 = platform_get_drvdata(pdev); + int err; + + err = pwmchip_remove(&ab8500->chip); + if (err < 0) + return err; + dev_dbg(&pdev->dev, "pwm driver removed\n"); - kfree(pwm); + kfree(ab8500); + return 0; } @@ -150,19 +145,8 @@ static struct platform_driver ab8500_pwm_driver = { .probe = ab8500_pwm_probe, .remove = __devexit_p(ab8500_pwm_remove), }; +module_platform_driver(ab8500_pwm_driver); -static int __init ab8500_pwm_init(void) -{ - return platform_driver_register(&ab8500_pwm_driver); -} - -static void __exit ab8500_pwm_exit(void) -{ - platform_driver_unregister(&ab8500_pwm_driver); -} - -subsys_initcall(ab8500_pwm_init); -module_exit(ab8500_pwm_exit); MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>"); MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver"); MODULE_ALIAS("platform:ab8500-pwm"); diff --git a/drivers/pwm/pwm-bfin.c b/drivers/pwm/pwm-bfin.c index d53c4e7941e..5da8e185e83 100644 --- a/drivers/pwm/pwm-bfin.c +++ b/drivers/pwm/pwm-bfin.c @@ -69,9 +69,6 @@ static int bfin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long period, duty; unsigned long long val; - if (duty_ns < 0 || duty_ns > period_ns) - return -EINVAL; - val = (unsigned long long)get_sclk() * period_ns; do_div(val, NSEC_PER_SEC); period = val; diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c index 2a0b3533397..8a5d3ae2946 100644 --- a/drivers/pwm/pwm-imx.c +++ b/drivers/pwm/pwm-imx.c @@ -16,8 +16,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/pwm.h> -#include <mach/hardware.h> - +#include <linux/of_device.h> /* i.MX1 and i.MX21 share the same PWM function block: */ @@ -25,6 +24,7 @@ #define MX1_PWMS 0x04 /* PWM Sample Register */ #define MX1_PWMP 0x08 /* PWM Period Register */ +#define MX1_PWMC_EN (1 << 4) /* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ @@ -40,110 +40,165 @@ #define MX3_PWMCR_EN (1 << 0) struct imx_chip { - struct clk *clk; + struct clk *clk_per; + struct clk *clk_ipg; - int clk_enabled; + int enabled; void __iomem *mmio_base; struct pwm_chip chip; + + int (*config)(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns); + void (*set_enable)(struct pwm_chip *chip, bool enable); }; #define to_imx_chip(chip) container_of(chip, struct imx_chip, chip) -static int imx_pwm_config(struct pwm_chip *chip, +static int imx_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns) { struct imx_chip *imx = to_imx_chip(chip); - if (!(cpu_is_mx1() || cpu_is_mx21())) { - unsigned long long c; - unsigned long period_cycles, duty_cycles, prescale; - u32 cr; - - c = clk_get_rate(imx->clk); - c = c * period_ns; - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * duty_ns; - do_div(c, period_ns); - duty_cycles = c; - - /* - * according to imx pwm RM, the real period value should be - * PERIOD value in PWMPR plus 2. - */ - if (period_cycles > 2) - period_cycles -= 2; - else - period_cycles = 0; - - writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); - writel(period_cycles, imx->mmio_base + MX3_PWMPR); - - cr = MX3_PWMCR_PRESCALER(prescale) | - MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | - MX3_PWMCR_DBGEN | MX3_PWMCR_EN; - - if (cpu_is_mx25()) - cr |= MX3_PWMCR_CLKSRC_IPG; - else - cr |= MX3_PWMCR_CLKSRC_IPG_HIGH; - - writel(cr, imx->mmio_base + MX3_PWMCR); - } else if (cpu_is_mx1() || cpu_is_mx21()) { - /* The PWM subsystem allows for exact frequencies. However, - * I cannot connect a scope on my device to the PWM line and - * thus cannot provide the program the PWM controller - * exactly. Instead, I'm relying on the fact that the - * Bootloader (u-boot or WinCE+haret) has programmed the PWM - * function group already. So I'll just modify the PWM sample - * register to follow the ratio of duty_ns vs. period_ns - * accordingly. - * - * This is good enough for programming the brightness of - * the LCD backlight. - * - * The real implementation would divide PERCLK[0] first by - * both the prescaler (/1 .. /128) and then by CLKSEL - * (/2 .. /16). - */ - u32 max = readl(imx->mmio_base + MX1_PWMP); - u32 p = max * duty_ns / period_ns; - writel(max - p, imx->mmio_base + MX1_PWMS); - } else { - BUG(); - } + /* + * The PWM subsystem allows for exact frequencies. However, + * I cannot connect a scope on my device to the PWM line and + * thus cannot provide the program the PWM controller + * exactly. Instead, I'm relying on the fact that the + * Bootloader (u-boot or WinCE+haret) has programmed the PWM + * function group already. So I'll just modify the PWM sample + * register to follow the ratio of duty_ns vs. period_ns + * accordingly. + * + * This is good enough for programming the brightness of + * the LCD backlight. + * + * The real implementation would divide PERCLK[0] first by + * both the prescaler (/1 .. /128) and then by CLKSEL + * (/2 .. /16). + */ + u32 max = readl(imx->mmio_base + MX1_PWMP); + u32 p = max * duty_ns / period_ns; + writel(max - p, imx->mmio_base + MX1_PWMS); return 0; } +static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) +{ + struct imx_chip *imx = to_imx_chip(chip); + u32 val; + + val = readl(imx->mmio_base + MX1_PWMC); + + if (enable) + val |= MX1_PWMC_EN; + else + val &= ~MX1_PWMC_EN; + + writel(val, imx->mmio_base + MX1_PWMC); +} + +static int imx_pwm_config_v2(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + unsigned long long c; + unsigned long period_cycles, duty_cycles, prescale; + u32 cr; + + c = clk_get_rate(imx->clk_per); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + /* + * according to imx pwm RM, the real period value should be + * PERIOD value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + + writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); + writel(period_cycles, imx->mmio_base + MX3_PWMPR); + + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH; + + if (imx->enabled) + cr |= MX3_PWMCR_EN; + + writel(cr, imx->mmio_base + MX3_PWMCR); + + return 0; +} + +static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable) +{ + struct imx_chip *imx = to_imx_chip(chip); + u32 val; + + val = readl(imx->mmio_base + MX3_PWMCR); + + if (enable) + val |= MX3_PWMCR_EN; + else + val &= ~MX3_PWMCR_EN; + + writel(val, imx->mmio_base + MX3_PWMCR); +} + +static int imx_pwm_config(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + int ret; + + ret = clk_prepare_enable(imx->clk_ipg); + if (ret) + return ret; + + ret = imx->config(chip, pwm, duty_ns, period_ns); + + clk_disable_unprepare(imx->clk_ipg); + + return ret; +} + static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { struct imx_chip *imx = to_imx_chip(chip); - int rc = 0; + int ret; - if (!imx->clk_enabled) { - rc = clk_prepare_enable(imx->clk); - if (!rc) - imx->clk_enabled = 1; - } - return rc; + ret = clk_prepare_enable(imx->clk_per); + if (ret) + return ret; + + imx->set_enable(chip, true); + + imx->enabled = 1; + + return 0; } static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { struct imx_chip *imx = to_imx_chip(chip); - writel(0, imx->mmio_base + MX3_PWMCR); + imx->set_enable(chip, false); - if (imx->clk_enabled) { - clk_disable_unprepare(imx->clk); - imx->clk_enabled = 0; - } + clk_disable_unprepare(imx->clk_per); + imx->enabled = 0; } static struct pwm_ops imx_pwm_ops = { @@ -153,30 +208,66 @@ static struct pwm_ops imx_pwm_ops = { .owner = THIS_MODULE, }; +struct imx_pwm_data { + int (*config)(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns); + void (*set_enable)(struct pwm_chip *chip, bool enable); +}; + +static struct imx_pwm_data imx_pwm_data_v1 = { + .config = imx_pwm_config_v1, + .set_enable = imx_pwm_set_enable_v1, +}; + +static struct imx_pwm_data imx_pwm_data_v2 = { + .config = imx_pwm_config_v2, + .set_enable = imx_pwm_set_enable_v2, +}; + +static const struct of_device_id imx_pwm_dt_ids[] = { + { .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, }, + { .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids); + static int __devinit imx_pwm_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = + of_match_device(imx_pwm_dt_ids, &pdev->dev); + struct imx_pwm_data *data; struct imx_chip *imx; struct resource *r; int ret = 0; + if (!of_id) + return -ENODEV; + imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL); if (imx == NULL) { dev_err(&pdev->dev, "failed to allocate memory\n"); return -ENOMEM; } - imx->clk = devm_clk_get(&pdev->dev, "pwm"); + imx->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(imx->clk_per)) { + dev_err(&pdev->dev, "getting per clock failed with %ld\n", + PTR_ERR(imx->clk_per)); + return PTR_ERR(imx->clk_per); + } - if (IS_ERR(imx->clk)) - return PTR_ERR(imx->clk); + imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(imx->clk_ipg)) { + dev_err(&pdev->dev, "getting ipg clock failed with %ld\n", + PTR_ERR(imx->clk_ipg)); + return PTR_ERR(imx->clk_ipg); + } imx->chip.ops = &imx_pwm_ops; imx->chip.dev = &pdev->dev; imx->chip.base = -1; imx->chip.npwm = 1; - imx->clk_enabled = 0; - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (r == NULL) { dev_err(&pdev->dev, "no memory resource defined\n"); @@ -187,6 +278,10 @@ static int __devinit imx_pwm_probe(struct platform_device *pdev) if (imx->mmio_base == NULL) return -EADDRNOTAVAIL; + data = of_id->data; + imx->config = data->config; + imx->set_enable = data->set_enable; + ret = pwmchip_add(&imx->chip); if (ret < 0) return ret; @@ -208,23 +303,14 @@ static int __devexit imx_pwm_remove(struct platform_device *pdev) static struct platform_driver imx_pwm_driver = { .driver = { - .name = "mxc_pwm", + .name = "imx-pwm", + .of_match_table = of_match_ptr(imx_pwm_dt_ids), }, .probe = imx_pwm_probe, .remove = __devexit_p(imx_pwm_remove), }; -static int __init imx_pwm_init(void) -{ - return platform_driver_register(&imx_pwm_driver); -} -arch_initcall(imx_pwm_init); - -static void __exit imx_pwm_exit(void) -{ - platform_driver_unregister(&imx_pwm_driver); -} -module_exit(imx_pwm_exit); +module_platform_driver(imx_pwm_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c new file mode 100644 index 00000000000..10250fcefb9 --- /dev/null +++ b/drivers/pwm/pwm-jz4740.c @@ -0,0 +1,221 @@ +/* + * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> + * JZ4740 platform PWM support + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> + +#include <asm/mach-jz4740/gpio.h> +#include <asm/mach-jz4740/timer.h> + +#define NUM_PWM 8 + +static const unsigned int jz4740_pwm_gpio_list[NUM_PWM] = { + JZ_GPIO_PWM0, + JZ_GPIO_PWM1, + JZ_GPIO_PWM2, + JZ_GPIO_PWM3, + JZ_GPIO_PWM4, + JZ_GPIO_PWM5, + JZ_GPIO_PWM6, + JZ_GPIO_PWM7, +}; + +struct jz4740_pwm_chip { + struct pwm_chip chip; + struct clk *clk; +}; + +static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip) +{ + return container_of(chip, struct jz4740_pwm_chip, chip); +} + +static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm]; + int ret; + + /* + * Timers 0 and 1 are used for system tasks, so they are unavailable + * for use as PWMs. + */ + if (pwm->hwpwm < 2) + return -EBUSY; + + ret = gpio_request(gpio, pwm->label); + if (ret) { + dev_err(chip->dev, "Failed to request GPIO#%u for PWM: %d\n", + gpio, ret); + return ret; + } + + jz_gpio_set_function(gpio, JZ_GPIO_FUNC_PWM); + + jz4740_timer_start(pwm->hwpwm); + + return 0; +} + +static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm]; + + jz4740_timer_set_ctrl(pwm->hwpwm, 0); + + jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE); + gpio_free(gpio); + + jz4740_timer_stop(pwm->hwpwm); +} + +static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm); + + ctrl |= JZ_TIMER_CTRL_PWM_ENABLE; + jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); + jz4740_timer_enable(pwm->hwpwm); + + return 0; +} + +static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm); + + ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE; + jz4740_timer_disable(pwm->hwpwm); + jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); +} + +static int jz4740_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip); + unsigned long long tmp; + unsigned long period, duty; + unsigned int prescaler = 0; + uint16_t ctrl; + bool is_enabled; + + tmp = (unsigned long long)clk_get_rate(jz4740->clk) * period_ns; + do_div(tmp, 1000000000); + period = tmp; + + while (period > 0xffff && prescaler < 6) { + period >>= 2; + ++prescaler; + } + + if (prescaler == 6) + return -EINVAL; + + tmp = (unsigned long long)period * duty_ns; + do_div(tmp, period_ns); + duty = period - tmp; + + if (duty >= period) + duty = period - 1; + + is_enabled = jz4740_timer_is_enabled(pwm->hwpwm); + if (is_enabled) + jz4740_pwm_disable(chip, pwm); + + jz4740_timer_set_count(pwm->hwpwm, 0); + jz4740_timer_set_duty(pwm->hwpwm, duty); + jz4740_timer_set_period(pwm->hwpwm, period); + + ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT | + JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN; + + jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); + + if (is_enabled) + jz4740_pwm_enable(chip, pwm); + + return 0; +} + +static const struct pwm_ops jz4740_pwm_ops = { + .request = jz4740_pwm_request, + .free = jz4740_pwm_free, + .config = jz4740_pwm_config, + .enable = jz4740_pwm_enable, + .disable = jz4740_pwm_disable, + .owner = THIS_MODULE, +}; + +static int __devinit jz4740_pwm_probe(struct platform_device *pdev) +{ + struct jz4740_pwm_chip *jz4740; + int ret; + + jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL); + if (!jz4740) + return -ENOMEM; + + jz4740->clk = clk_get(NULL, "ext"); + if (IS_ERR(jz4740->clk)) + return PTR_ERR(jz4740->clk); + + jz4740->chip.dev = &pdev->dev; + jz4740->chip.ops = &jz4740_pwm_ops; + jz4740->chip.npwm = NUM_PWM; + jz4740->chip.base = -1; + + ret = pwmchip_add(&jz4740->chip); + if (ret < 0) { + clk_put(jz4740->clk); + return ret; + } + + platform_set_drvdata(pdev, jz4740); + + return 0; +} + +static int __devexit jz4740_pwm_remove(struct platform_device *pdev) +{ + struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev); + int ret; + + ret = pwmchip_remove(&jz4740->chip); + if (ret < 0) + return ret; + + clk_put(jz4740->clk); + + return 0; +} + +static struct platform_driver jz4740_pwm_driver = { + .driver = { + .name = "jz4740-pwm", + .owner = THIS_MODULE, + }, + .probe = jz4740_pwm_probe, + .remove = __devexit_p(jz4740_pwm_remove), +}; +module_platform_driver(jz4740_pwm_driver); + +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver"); +MODULE_ALIAS("platform:jz4740-pwm"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-puv3.c b/drivers/pwm/pwm-puv3.c new file mode 100644 index 00000000000..2a93f37c46a --- /dev/null +++ b/drivers/pwm/pwm-puv3.c @@ -0,0 +1,161 @@ +/* + * linux/arch/unicore32/kernel/pwm.c + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> + * Copyright (C) 2001-2010 Guan Xuetao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pwm.h> + +#include <asm/div64.h> +#include <mach/hardware.h> + +struct puv3_pwm_chip { + struct pwm_chip chip; + void __iomem *base; + struct clk *clk; + bool enabled; +}; + +static inline struct puv3_pwm_chip *to_puv3(struct pwm_chip *chip) +{ + return container_of(chip, struct puv3_pwm_chip, chip); +} + +/* + * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + */ +static int puv3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + unsigned long period_cycles, prescale, pv, dc; + struct puv3_pwm_chip *puv3 = to_puv3(chip); + unsigned long long c; + + c = clk_get_rate(puv3->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 1) + period_cycles = 1; + + prescale = (period_cycles - 1) / 1024; + pv = period_cycles / (prescale + 1) - 1; + + if (prescale > 63) + return -EINVAL; + + if (duty_ns == period_ns) + dc = OST_PWMDCCR_FDCYCLE; + else + dc = (pv + 1) * duty_ns / period_ns; + + /* + * NOTE: the clock to PWM has to be enabled first + * before writing to the registers + */ + clk_prepare_enable(puv3->clk); + + writel(prescale, puv3->base + OST_PWM_PWCR); + writel(pv - dc, puv3->base + OST_PWM_DCCR); + writel(pv, puv3->base + OST_PWM_PCR); + + clk_disable_unprepare(puv3->clk); + + return 0; +} + +static int puv3_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct puv3_pwm_chip *puv3 = to_puv3(chip); + + return clk_prepare_enable(puv3->clk); +} + +static void puv3_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct puv3_pwm_chip *puv3 = to_puv3(chip); + + clk_disable_unprepare(puv3->clk); +} + +static const struct pwm_ops puv3_pwm_ops = { + .config = puv3_pwm_config, + .enable = puv3_pwm_enable, + .disable = puv3_pwm_disable, + .owner = THIS_MODULE, +}; + +static int __devinit pwm_probe(struct platform_device *pdev) +{ + struct puv3_pwm_chip *puv3; + struct resource *r; + int ret; + + puv3 = devm_kzalloc(&pdev->dev, sizeof(*puv3), GFP_KERNEL); + if (puv3 == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + puv3->clk = devm_clk_get(&pdev->dev, "OST_CLK"); + if (IS_ERR(puv3->clk)) + return PTR_ERR(puv3->clk); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + puv3->base = devm_request_and_ioremap(&pdev->dev, r); + if (puv3->base == NULL) + return -EADDRNOTAVAIL; + + puv3->chip.dev = &pdev->dev; + puv3->chip.ops = &puv3_pwm_ops; + puv3->chip.base = -1; + puv3->chip.npwm = 1; + + ret = pwmchip_add(&puv3->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, puv3); + return 0; +} + +static int __devexit pwm_remove(struct platform_device *pdev) +{ + struct puv3_pwm_chip *puv3 = platform_get_drvdata(pdev); + + return pwmchip_remove(&puv3->chip); +} + +static struct platform_driver puv3_pwm_driver = { + .driver = { + .name = "PKUnity-v3-PWM", + }, + .probe = pwm_probe, + .remove = __devexit_p(pwm_remove), +}; +module_platform_driver(puv3_pwm_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c index bd5867a1c70..260c3a88564 100644 --- a/drivers/pwm/pwm-pxa.c +++ b/drivers/pwm/pwm-pxa.c @@ -70,9 +70,6 @@ static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long offset; int rc; - if (period_ns == 0 || duty_ns > period_ns) - return -EINVAL; - offset = pwm->hwpwm ? 0x10 : 0; c = clk_get_rate(pc->clk); diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c index e5187c0ade9..023a3bee76e 100644 --- a/drivers/pwm/pwm-samsung.c +++ b/drivers/pwm/pwm-samsung.c @@ -126,9 +126,6 @@ static int s3c_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ) return -ERANGE; - if (duty_ns > period_ns) - return -EINVAL; - if (period_ns == s3c->period_ns && duty_ns == s3c->duty_ns) return 0; diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 4b6688909fe..d6d4cf05565 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -32,6 +32,7 @@ #define CAP3 0x10 #define CAP4 0x14 #define ECCTL2 0x2A +#define ECCTL2_APWM_POL_LOW BIT(10) #define ECCTL2_APWM_MODE BIT(9) #define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6)) #define ECCTL2_TSCTR_FREERUN BIT(4) @@ -59,7 +60,7 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long period_cycles, duty_cycles; unsigned int reg_val; - if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC) + if (period_ns > NSEC_PER_SEC) return -ERANGE; c = pc->clk_rate; @@ -111,6 +112,26 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } +static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned short reg_val; + + pm_runtime_get_sync(pc->chip.dev); + reg_val = readw(pc->mmio_base + ECCTL2); + if (polarity == PWM_POLARITY_INVERSED) + /* Duty cycle defines LOW period of PWM */ + reg_val |= ECCTL2_APWM_POL_LOW; + else + /* Duty cycle defines HIGH period of PWM */ + reg_val &= ~ECCTL2_APWM_POL_LOW; + + writew(reg_val, pc->mmio_base + ECCTL2); + pm_runtime_put_sync(pc->chip.dev); + return 0; +} + static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); @@ -157,6 +178,7 @@ static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) static const struct pwm_ops ecap_pwm_ops = { .free = ecap_pwm_free, .config = ecap_pwm_config, + .set_polarity = ecap_pwm_set_polarity, .enable = ecap_pwm_enable, .disable = ecap_pwm_disable, .owner = THIS_MODULE, diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index b1996bcd5b7..d3c1dff0a0d 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -81,6 +81,15 @@ #define AQCTL_ZRO_FRCHIGH BIT(1) #define AQCTL_ZRO_FRCTOGGLE (BIT(1) | BIT(0)) +#define AQCTL_CHANA_POLNORMAL (AQCTL_CAU_FRCLOW | AQCTL_PRD_FRCHIGH | \ + AQCTL_ZRO_FRCHIGH) +#define AQCTL_CHANA_POLINVERSED (AQCTL_CAU_FRCHIGH | AQCTL_PRD_FRCLOW | \ + AQCTL_ZRO_FRCLOW) +#define AQCTL_CHANB_POLNORMAL (AQCTL_CBU_FRCLOW | AQCTL_PRD_FRCHIGH | \ + AQCTL_ZRO_FRCHIGH) +#define AQCTL_CHANB_POLINVERSED (AQCTL_CBU_FRCHIGH | AQCTL_PRD_FRCLOW | \ + AQCTL_ZRO_FRCLOW) + #define AQSFRC_RLDCSF_MASK (BIT(7) | BIT(6)) #define AQSFRC_RLDCSF_ZRO 0 #define AQSFRC_RLDCSF_PRD BIT(6) @@ -105,6 +114,7 @@ struct ehrpwm_pwm_chip { unsigned int clk_rate; void __iomem *mmio_base; unsigned long period_cycles[NUM_PWM_CHANNEL]; + enum pwm_polarity polarity[NUM_PWM_CHANNEL]; }; static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip) @@ -165,39 +175,37 @@ static int set_prescale_div(unsigned long rqst_prescaler, return 1; } -static void configure_chans(struct ehrpwm_pwm_chip *pc, int chan, - unsigned long duty_cycles) +static void configure_polarity(struct ehrpwm_pwm_chip *pc, int chan) { - int cmp_reg, aqctl_reg; + int aqctl_reg; unsigned short aqctl_val, aqctl_mask; /* - * Channels can be configured from action qualifier module. - * Channel 0 configured with compare A register and for - * up-counter mode. - * Channel 1 configured with compare B register and for - * up-counter mode. + * Configure PWM output to HIGH/LOW level on counter + * reaches compare register value and LOW/HIGH level + * on counter value reaches period register value and + * zero value on counter */ if (chan == 1) { aqctl_reg = AQCTLB; - cmp_reg = CMPB; - /* Configure PWM Low from compare B value */ - aqctl_val = AQCTL_CBU_FRCLOW; aqctl_mask = AQCTL_CBU_MASK; + + if (pc->polarity[chan] == PWM_POLARITY_INVERSED) + aqctl_val = AQCTL_CHANB_POLINVERSED; + else + aqctl_val = AQCTL_CHANB_POLNORMAL; } else { - cmp_reg = CMPA; aqctl_reg = AQCTLA; - /* Configure PWM Low from compare A value*/ - aqctl_val = AQCTL_CAU_FRCLOW; aqctl_mask = AQCTL_CAU_MASK; + + if (pc->polarity[chan] == PWM_POLARITY_INVERSED) + aqctl_val = AQCTL_CHANA_POLINVERSED; + else + aqctl_val = AQCTL_CHANA_POLNORMAL; } - /* Configure PWM High from period value and zero value */ - aqctl_val |= AQCTL_PRD_FRCHIGH | AQCTL_ZRO_FRCHIGH; aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK; - ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val); - - ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles); + ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val); } /* @@ -211,9 +219,9 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long long c; unsigned long period_cycles, duty_cycles; unsigned short ps_divval, tb_divval; - int i; + int i, cmp_reg; - if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC) + if (period_ns > NSEC_PER_SEC) return -ERANGE; c = pc->clk_rate; @@ -278,12 +286,29 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK, TBCTL_CTRMODE_UP); - /* Configure the channel for duty cycle */ - configure_chans(pc, pwm->hwpwm, duty_cycles); + if (pwm->hwpwm == 1) + /* Channel 1 configured with compare B register */ + cmp_reg = CMPB; + else + /* Channel 0 configured with compare A register */ + cmp_reg = CMPA; + + ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles); + pm_runtime_put_sync(chip->dev); return 0; } +static int ehrpwm_pwm_set_polarity(struct pwm_chip *chip, + struct pwm_device *pwm, enum pwm_polarity polarity) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + + /* Configuration of polarity in hardware delayed, do at enable */ + pc->polarity[pwm->hwpwm] = polarity; + return 0; +} + static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); @@ -307,6 +332,9 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val); + /* Channels polarity can be configured from action qualifier module */ + configure_polarity(pc, pwm->hwpwm); + /* Enable time counter for free_run */ ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN); return 0; @@ -358,6 +386,7 @@ static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) static const struct pwm_ops ehrpwm_pwm_ops = { .free = ehrpwm_pwm_free, .config = ehrpwm_pwm_config, + .set_polarity = ehrpwm_pwm_set_polarity, .enable = ehrpwm_pwm_enable, .disable = ehrpwm_pwm_disable, .owner = THIS_MODULE, diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 995f0164c9b..069983ca49f 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -213,7 +213,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->exit = data->exit; pb->dev = &pdev->dev; - pb->pwm = pwm_get(&pdev->dev, NULL); + pb->pwm = devm_pwm_get(&pdev->dev, NULL); if (IS_ERR(pb->pwm)) { dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); @@ -246,7 +246,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) if (IS_ERR(bl)) { dev_err(&pdev->dev, "failed to register backlight\n"); ret = PTR_ERR(bl); - goto err_bl; + goto err_alloc; } bl->props.brightness = data->dft_brightness; @@ -255,8 +255,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bl); return 0; -err_bl: - pwm_put(pb->pwm); err_alloc: if (data->exit) data->exit(&pdev->dev); @@ -271,7 +269,6 @@ static int pwm_backlight_remove(struct platform_device *pdev) backlight_device_unregister(bl); pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); - pwm_put(pb->pwm); if (pb->exit) pb->exit(&pdev->dev); return 0; diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 21d076c5089..112b3143684 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -1,11 +1,13 @@ #ifndef __LINUX_PWM_H #define __LINUX_PWM_H +#include <linux/err.h> #include <linux/of.h> struct pwm_device; struct seq_file; +#if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM) /* * pwm_request - request a PWM device */ @@ -30,10 +32,47 @@ int pwm_enable(struct pwm_device *pwm); * pwm_disable - stop a PWM output toggling */ void pwm_disable(struct pwm_device *pwm); +#else +static inline struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + return ERR_PTR(-ENODEV); +} + +static inline void pwm_free(struct pwm_device *pwm) +{ +} + +static inline int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + return -EINVAL; +} + +static inline int pwm_enable(struct pwm_device *pwm) +{ + return -EINVAL; +} + +static inline void pwm_disable(struct pwm_device *pwm) +{ +} +#endif -#ifdef CONFIG_PWM struct pwm_chip; +/** + * enum pwm_polarity - polarity of a PWM signal + * @PWM_POLARITY_NORMAL: a high signal for the duration of the duty- + * cycle, followed by a low signal for the remainder of the pulse + * period + * @PWM_POLARITY_INVERSED: a low signal for the duration of the duty- + * cycle, followed by a high signal for the remainder of the pulse + * period + */ +enum pwm_polarity { + PWM_POLARITY_NORMAL, + PWM_POLARITY_INVERSED, +}; + enum { PWMF_REQUESTED = 1 << 0, PWMF_ENABLED = 1 << 1, @@ -61,11 +100,17 @@ static inline unsigned int pwm_get_period(struct pwm_device *pwm) return pwm ? pwm->period : 0; } +/* + * pwm_set_polarity - configure the polarity of a PWM signal + */ +int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity); + /** * struct pwm_ops - PWM controller operations * @request: optional hook for requesting a PWM * @free: optional hook for freeing a PWM * @config: configure duty cycles and period length for this PWM + * @set_polarity: configure the polarity of this PWM * @enable: enable PWM output toggling * @disable: disable PWM output toggling * @dbg_show: optional routine to show contents in debugfs @@ -79,6 +124,9 @@ struct pwm_ops { int (*config)(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns); + int (*set_polarity)(struct pwm_chip *chip, + struct pwm_device *pwm, + enum pwm_polarity polarity); int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm); void (*disable)(struct pwm_chip *chip, @@ -113,6 +161,7 @@ struct pwm_chip { unsigned int of_pwm_n_cells; }; +#if IS_ENABLED(CONFIG_PWM) int pwm_set_chip_data(struct pwm_device *pwm, void *data); void *pwm_get_chip_data(struct pwm_device *pwm); @@ -125,6 +174,57 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, struct pwm_device *pwm_get(struct device *dev, const char *consumer); void pwm_put(struct pwm_device *pwm); +struct pwm_device *devm_pwm_get(struct device *dev, const char *consumer); +void devm_pwm_put(struct device *dev, struct pwm_device *pwm); +#else +static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data) +{ + return -EINVAL; +} + +static inline void *pwm_get_chip_data(struct pwm_device *pwm) +{ + return NULL; +} + +static inline int pwmchip_add(struct pwm_chip *chip) +{ + return -EINVAL; +} + +static inline int pwmchip_remove(struct pwm_chip *chip) +{ + return -EINVAL; +} + +static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, + unsigned int index, + const char *label) +{ + return ERR_PTR(-ENODEV); +} + +static inline struct pwm_device *pwm_get(struct device *dev, + const char *consumer) +{ + return ERR_PTR(-ENODEV); +} + +static inline void pwm_put(struct pwm_device *pwm) +{ +} + +static inline struct pwm_device *devm_pwm_get(struct device *dev, + const char *consumer) +{ + return ERR_PTR(-ENODEV); +} + +static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm) +{ +} +#endif + struct pwm_lookup { struct list_head list; const char *provider; @@ -141,8 +241,12 @@ struct pwm_lookup { .con_id = _con_id, \ } +#if IS_ENABLED(CONFIG_PWM) void pwm_add_table(struct pwm_lookup *table, size_t num); - +#else +static inline void pwm_add_table(struct pwm_lookup *table, size_t num) +{ +} #endif #endif /* __LINUX_PWM_H */ |