Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1381 insertions, 0 deletions

diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c
new file mode 100644
index 00000000000..b556263a57f
--- /dev/null
+++ b/sound/oss/aedsp16.c
@@ -0,0 +1,1381 @@
+/*
+   sound/oss/aedsp16.c
+
+   Audio Excel DSP 16 software configuration routines
+   Copyright (C) 1995,1996,1997,1998  Riccardo Facchetti (fizban@tin.it)
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+/*
+ * Include the main OSS Lite header file. It include all the os, OSS Lite, etc
+ * headers needed by this source.
+ */
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include "sound_config.h"
+
+/*
+ * Sanity checks
+ */
+
+#if defined(CONFIG_SOUND_AEDSP16_SBPRO) && defined(CONFIG_SOUND_AEDSP16_MSS)
+#error You have to enable only one of the MSS and SBPRO emulations.
+#endif
+
+/*
+
+   READ THIS
+
+   This module started to configure the Audio Excel DSP 16 Sound Card.
+   Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards.
+
+   NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this
+   audio card and want to see the kernel support for it, please contact me.
+
+   Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401
+   compatible card.
+   It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq),
+   so before this module, the only way to configure the DSP under linux was
+   boot the MS-DOS loading the sound.sys device driver (this driver soft-
+   configure the sound board hardware by massaging someone of its registers),
+   and then ctrl-alt-del to boot linux with the DSP configured by the DOS
+   driver.
+
+   This module works configuring your Audio Excel DSP 16's irq, dma and
+   mpu-401-irq. The OSS Lite routines rely on the fact that if the
+   hardware is there, they can detect it. The problem with AEDSP16 is
+   that no hardware can be found by the probe routines if the sound card
+   is not configured properly. Sometimes the kernel probe routines can find
+   an SBPRO even when the card is not configured (this is the standard setup
+   of the card), but the SBPRO emulation don't work well if the card is not
+   properly initialized. For this reason
+
+   aedsp16_init_board()
+
+   routine is called before the OSS Lite probe routines try to detect the
+   hardware.
+
+   NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS)
+
+   NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards
+   have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They
+   have to be configured by software.
+
+   NOTE: The driver is merged with the new OSS Lite sound driver. It works
+   as a lowlevel driver.
+
+   The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS;
+   the OSS Lite sound driver can be configured for SBPRO and MSS cards
+   at the same time, but the aedsp16 can't be two cards!!
+   When we configure it, we have to choose the SBPRO or the MSS emulation
+   for AEDSP16. We also can install a *REAL* card of the other type (see [1]).
+
+   NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO
+   please let me know if it works.
+
+   The MPU-401 support can be compiled in together with one of the other
+   two operating modes.
+
+   NOTE: This is something like plug-and-play: we have only to plug
+   the AEDSP16 board in the socket, and then configure and compile
+   a kernel that uses the AEDSP16 software configuration capability.
+   No jumper setting is needed!
+
+   For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3
+   you have just to make config the OSS Lite package, configuring
+   the AEDSP16 sound card, then activating the SBPro emulation mode
+   and at last configuring IRQ and DMA.
+   Compile the kernel and run it.
+
+   NOTE: This means for SC-6000 cards that you can choose irq and dma,
+   but not the I/O addresses. To change I/O addresses you have to set
+   them with jumpers. For SC-6600 cards you have no jumpers so you have
+   to set up your full card configuration in the make config.
+
+   You can change the irq/dma/mirq settings WITHOUT THE NEED to open
+   your computer and massage the jumpers (there are no irq/dma/mirq
+   jumpers to be configured anyway, only I/O BASE values have to be
+   configured with jumpers)
+
+   For some ununderstandable reason, the card default of irq 7, dma 1,
+   don't work for me. Seems to be an IRQ or DMA conflict. Under heavy
+   HDD work, the kernel start to erupt out a lot of messages like:
+
+   'Sound: DMA timed out - IRQ/DRQ config error?'
+
+   For what I can say, I have NOT any conflict at irq 7 (under linux I'm
+   using the lp polling driver), and dma line 1 is unused as stated by
+   /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so
+   I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows!
+   Anyway a setting of irq 10, dma 3 works really fine.
+
+   NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know
+   the emulation mode, all the installed hardware and the hardware
+   configuration (irq and dma settings of all the hardware).
+
+   This init module should work with SBPRO+MSS, when one of the two is
+   the AEDSP16 emulation and the other the real card. (see [1])
+   For example:
+
+   AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other
+   AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other
+
+   MPU401 should work. (see [2])
+
+   [1]
+       ---
+       Date: Mon, 29 Jul 1997 08:35:40 +0100
+       From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk>
+
+       [...]
+       Just to let you know got my Audio Excel (emulating a MSS) working
+       with my original SB16, thanks for the driver!
+       [...]
+       ---
+
+   [2] Not tested by me for lack of hardware.
+
+   TODO, WISHES AND TECH
+
+   - About I/O ports allocation -
+
+   Request the 2x0h region (port base) in any case if we are using this card.
+
+   NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16
+   port base region (see code) does not mean necessarily that we are emulating
+   sbpro.  Even if this region is the sbpro I/O ports region, we use this
+   region to access the control registers of the card, and if emulating
+   sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro
+   registers are not used, in no way, to emulate an sbpro: they are
+   used only for configuration purposes.
+
+   Started Fri Mar 17 16:13:18 MET 1995
+
+   v0.1 (ALPHA, was an user-level program called AudioExcelDSP16.c)
+   - Initial code.
+   v0.2 (ALPHA)
+   - Cleanups.
+   - Integrated with Linux voxware v 2.90-2 kernel sound driver.
+   - SoundBlaster Pro mode configuration.
+   - Microsoft Sound System mode configuration.
+   - MPU-401 mode configuration.
+   v0.3 (ALPHA)
+   - Cleanups.
+   - Rearranged the code to let aedsp16_init_board be more general.
+   - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h
+   inclusion too. We rely on os.h
+   - Used the  to get a variable
+   len string (we are not sure about the len of Copyright string).
+   This works with any SB and compatible.
+   - Added the code to request_region at device init (should go in
+   the main body of voxware).
+   v0.4 (BETA)
+   - Better configure.c patch for aedsp16 configuration (better
+   logic of inclusion of AEDSP16 support)
+   - Modified the conditional compilation to better support more than
+   one sound card of the emulated type (read the NOTES above)
+   - Moved the sb init routine from the attach to the very first
+   probe in sb_card.c
+   - Rearrangements and cleanups
+   - Wiped out some unnecessary code and variables: this is kernel
+   code so it is better save some TEXT and DATA
+   - Fixed the request_region code. We must allocate the aedsp16 (sbpro)
+   I/O ports in any case because they are used to access the DSP
+   configuration registers and we can not allow anyone to get them.
+   v0.5
+   - cleanups on comments
+   - prep for diffs against v3.0-proto-950402
+   v0.6
+   - removed the request_region()s when compiling the MODULE sound.o
+   because we are not allowed (by the actual voxware structure) to
+   release_region()
+   v0.7 (pre ALPHA, not distributed)
+   - started porting this module to kernel 1.3.84. Dummy probe/attach
+   routines.
+   v0.8 (ALPHA)
+   - attached all the init routines.
+   v0.9 (BETA)
+   - Integrated with linux-pre2.0.7
+   - Integrated with configuration scripts.
+   - Cleaned up and beautyfied the code.
+   v0.9.9 (BETA)
+   - Thanks to Piercarlo Grandi: corrected the conditonal compilation code.
+     Now only the code configured is compiled in, with some memory saving.
+   v0.9.10
+   - Integration into the sound/lowlevel/ section of the sound driver.
+   - Re-organized the code.
+   v0.9.11 (not distributed)
+   - Rewritten the init interface-routines to initialize the AEDSP16 in
+     one shot.
+   - More cosmetics.
+   - SC-6600 support.
+   - More soft/hard configuration.
+   v0.9.12
+   - Refined the v0.9.11 code with conditional compilation to distinguish
+     between SC-6000 and SC-6600 code.
+   v1.0.0
+   - Prep for merging with OSS Lite and Linux kernel 2.1.13
+   - Corrected a bug in request/check/release region calls (thanks to the
+     new kernel exception handling).
+   v1.1
+   - Revamped for integration with new modularized sound drivers: to enhance
+     the flexibility of modular version, I have removed all the conditional
+     compilation for SBPRO, MPU and MSS code. Now it is all managed with
+     the ae_config structure.
+   v1.2
+   - Module informations added.
+   - Removed aedsp16_delay_10msec(), now using mdelay(10)
+   - All data and funcs moved to .*.init section.
+   v1.3
+   Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27
+   - got rid of check_region
+
+   Known Problems:
+   - Audio Excel DSP 16 III don't work with this driver.
+
+   Credits:
+   Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a
+   lot in testing the 0.9.11 and 0.9.12 versions of this driver.
+
+ */
+
+
+#define VERSION "1.3"		/* Version of Audio Excel DSP 16 driver */
+
+#undef	AEDSP16_DEBUG 		/* Define this to 1 to enable debug code     */
+#undef	AEDSP16_DEBUG_MORE 	/* Define this to 1 to enable more debug     */
+#undef	AEDSP16_INFO 		/* Define this to 1 to enable info code      */
+
+#if defined(AEDSP16_DEBUG)
+# define DBG(x)  printk x
+# if defined(AEDSP16_DEBUG_MORE)
+#  define DBG1(x) printk x
+# else
+#  define DBG1(x)
+# endif
+#else
+# define DBG(x)
+# define DBG1(x)
+#endif
+
+/*
+ * Misc definitions
+ */
+#define TRUE	1
+#define FALSE	0
+
+/*
+ * Region Size for request/check/release region.
+ */
+#define IOBASE_REGION_SIZE	0x10
+
+/*
+ * Hardware related defaults
+ */
+#define DEF_AEDSP16_IOB 0x220   /* 0x220(default) 0x240                 */
+#define DEF_AEDSP16_IRQ 7	/* 5 7(default) 9 10 11                 */
+#define DEF_AEDSP16_MRQ 0	/* 5 7 9 10 0(default), 0 means disable */
+#define DEF_AEDSP16_DMA 1	/* 0 1(default) 3                       */
+
+/*
+ * Commands of AEDSP16's DSP (SBPRO+special).
+ * Some of them are COMMAND_xx, in the future they may change.
+ */
+#define WRITE_MDIRQ_CFG   0x50	/* Set M&I&DRQ mask (the real config)   */
+#define COMMAND_52        0x52	/*                                      */
+#define READ_HARD_CFG     0x58	/* Read Hardware Config (I/O base etc)  */
+#define COMMAND_5C        0x5c	/*                                      */
+#define COMMAND_60        0x60	/*                                      */
+#define COMMAND_66        0x66	/*                                      */
+#define COMMAND_6C        0x6c	/*                                      */
+#define COMMAND_6E        0x6e	/*                                      */
+#define COMMAND_88        0x88	/*                                      */
+#define DSP_INIT_MSS      0x8c	/* Enable Microsoft Sound System mode   */
+#define COMMAND_C5        0xc5	/*                                      */
+#define GET_DSP_VERSION   0xe1	/* Get DSP Version                      */
+#define GET_DSP_COPYRIGHT 0xe3	/* Get DSP Copyright                    */
+
+/*
+ * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port
+ * to have the actual I/O port.
+ * Register permissions are:
+ * (wo) == Write Only
+ * (ro) == Read  Only
+ * (w-) == Write
+ * (r-) == Read
+ */
+#define DSP_RESET    0x06	/* offset of DSP RESET             (wo) */
+#define DSP_READ     0x0a	/* offset of DSP READ              (ro) */
+#define DSP_WRITE    0x0c	/* offset of DSP WRITE             (w-) */
+#define DSP_COMMAND  0x0c	/* offset of DSP COMMAND           (w-) */
+#define DSP_STATUS   0x0c	/* offset of DSP STATUS            (r-) */
+#define DSP_DATAVAIL 0x0e	/* offset of DSP DATA AVAILABLE    (ro) */
+
+
+#define RETRY           10	/* Various retry values on I/O opera-   */
+#define STATUSRETRY   1000	/* tions. Sometimes we have to          */
+#define HARDRETRY   500000	/* wait for previous cmd to complete    */
+
+/*
+ * Size of character arrays that store name and version of sound card
+ */
+#define CARDNAMELEN 15		/* Size of the card's name in chars     */
+#define CARDVERLEN  2		/* Size of the card's version in chars  */
+
+#if defined(CONFIG_SC6600)
+/*
+ * Bitmapped flags of hard configuration
+ */
+/*
+ * Decode macros (xl == low byte, xh = high byte)
+ */
+#define IOBASE(xl)		((xl & 0x01)?0x240:0x220)
+#define JOY(xl)  		(xl & 0x02)
+#define MPUADDR(xl)		( 			\
+				(xl & 0x0C)?0x330:	\
+				(xl & 0x08)?0x320:	\
+				(xl & 0x04)?0x310:	\
+						0x300)
+#define WSSADDR(xl)		((xl & 0x10)?0xE80:0x530)
+#define CDROM(xh)		(xh & 0x20)
+#define CDROMADDR(xh)		(((xh & 0x1F) << 4) + 0x200)
+/*
+ * Encode macros
+ */
+#define BLDIOBASE(xl, val) {		\
+	xl &= ~0x01; 			\
+	if (val == 0x240)		\
+		xl |= 0x01;		\
+	}
+#define BLDJOY(xl, val) {		\
+	xl &= ~0x02; 			\
+	if (val == 1)			\
+		xl |= 0x02;		\
+	}
+#define BLDMPUADDR(xl, val) {		\
+	xl &= ~0x0C;			\
+	switch (val) {			\
+		case 0x330:		\
+			xl |= 0x0C;	\
+			break;		\
+		case 0x320:		\
+			xl |= 0x08;	\
+			break;		\
+		case 0x310:		\
+			xl |= 0x04;	\
+			break;		\
+		case 0x300:		\
+			xl |= 0x00;	\
+			break;		\
+		default:		\
+			xl |= 0x00;	\
+			break;		\
+		}			\
+	}
+#define BLDWSSADDR(xl, val) {		\
+	xl &= ~0x10; 			\
+	if (val == 0xE80)		\
+		xl |= 0x10;		\
+	}
+#define BLDCDROM(xh, val) {		\
+	xh &= ~0x20; 			\
+	if (val == 1)			\
+		xh |= 0x20;		\
+	}
+#define BLDCDROMADDR(xh, val) {		\
+	int tmp = val;			\
+	tmp -= 0x200;			\
+	tmp >>= 4;			\
+	tmp &= 0x1F;			\
+	xh |= tmp;			\
+	xh &= 0x7F;			\
+	xh |= 0x40;			\
+	}
+#endif /* CONFIG_SC6600 */
+
+/*
+ * Bit mapped flags for calling aedsp16_init_board(), and saving the current
+ * emulation mode.
+ */
+#define INIT_NONE   (0   )
+#define INIT_SBPRO  (1<<0)
+#define INIT_MSS    (1<<1)
+#define INIT_MPU401 (1<<2)
+
+static int      soft_cfg __initdata = 0;	/* bitmapped config */
+static int      soft_cfg_mss __initdata = 0;	/* bitmapped mss config */
+static int      ver[CARDVERLEN] __initdata = {0, 0};	/* DSP Ver:
+						   hi->ver[0] lo->ver[1] */
+
+#if defined(CONFIG_SC6600)
+static int	hard_cfg[2]     /* lo<-hard_cfg[0] hi<-hard_cfg[1]      */
+                     __initdata = { 0, 0};
+#endif /* CONFIG_SC6600 */
+
+#if defined(CONFIG_SC6600)
+/* Decoded hard configuration */
+struct	d_hcfg {
+	int iobase;
+	int joystick;
+	int mpubase;
+	int wssbase;
+	int cdrom;
+	int cdrombase;
+};
+
+static struct d_hcfg decoded_hcfg __initdata = {0, };
+
+#endif /* CONFIG_SC6600 */
+
+/* orVals contain the values to be or'ed       				*/
+struct orVals {
+	int	val;		/* irq|mirq|dma                         */
+	int	or;		/* soft_cfg |= TheStruct.or             */
+};
+
+/* aedsp16_info contain the audio card configuration                  */
+struct aedsp16_info {
+	int base_io;            /* base I/O address for accessing card  */
+	int irq;                /* irq value for DSP I/O                */
+	int mpu_irq;            /* irq for mpu401 interface I/O         */
+	int dma;                /* dma value for DSP I/O                */
+	int mss_base;           /* base I/O for Microsoft Sound System  */
+	int mpu_base;           /* base I/O for MPU-401 emulation       */
+	int init;               /* Initialization status of the card    */
+};
+
+/*
+ * Magic values that the DSP will eat when configuring irq/mirq/dma
+ */
+/* DSP IRQ conversion array             */
+static struct orVals orIRQ[] __initdata = {
+	{0x05, 0x28},
+	{0x07, 0x08},
+	{0x09, 0x10},
+	{0x0a, 0x18},
+	{0x0b, 0x20},
+	{0x00, 0x00}
+};
+
+/* MPU-401 IRQ conversion array         */
+static struct orVals orMIRQ[] __initdata = {
+	{0x05, 0x04},
+	{0x07, 0x44},
+	{0x09, 0x84},
+	{0x0a, 0xc4},
+	{0x00, 0x00}
+};
+
+/* DMA Channels conversion array        */
+static struct orVals orDMA[] __initdata = {
+	{0x00, 0x01},
+	{0x01, 0x02},
+	{0x03, 0x03},
+	{0x00, 0x00}
+};
+
+static struct aedsp16_info ae_config = {
+	DEF_AEDSP16_IOB,
+	DEF_AEDSP16_IRQ,
+	DEF_AEDSP16_MRQ,
+	DEF_AEDSP16_DMA,
+	-1,
+	-1,
+	INIT_NONE
+};
+
+/*
+ * Buffers to store audio card informations
+ */
+static char     DSPCopyright[CARDNAMELEN + 1] __initdata = {0, };
+static char     DSPVersion[CARDVERLEN + 1] __initdata = {0, };
+
+static int __init aedsp16_wait_data(int port)
+{
+	int             loop = STATUSRETRY;
+	unsigned char   ret = 0;
+
+	DBG1(("aedsp16_wait_data (0x%x): ", port));
+
+	do {
+		  ret = inb(port + DSP_DATAVAIL);
+	/*
+	 * Wait for data available (bit 7 of ret == 1)
+	 */
+	  } while (!(ret & 0x80) && loop--);
+
+	if (ret & 0x80) {
+		DBG1(("success.\n"));
+		return TRUE;
+	}
+
+	DBG1(("failure.\n"));
+	return FALSE;
+}
+
+static int __init aedsp16_read(int port)
+{
+	int inbyte;
+
+	DBG(("    Read DSP Byte (0x%x): ", port));
+
+	if (aedsp16_wait_data(port) == FALSE) {
+		DBG(("failure.\n"));
+		return -1;
+	}
+
+	inbyte = inb(port + DSP_READ);
+
+	DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte));
+
+	return inbyte;
+}
+
+static int __init aedsp16_test_dsp(int port)
+{
+	return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE);
+}
+
+static int __init aedsp16_dsp_reset(int port)
+{
+	/*
+	 * Reset DSP
+	 */
+
+	DBG(("Reset DSP:\n"));
+
+	outb(1, (port + DSP_RESET));
+	udelay(10);
+	outb(0, (port + DSP_RESET));
+	udelay(10);
+	udelay(10);
+	if (aedsp16_test_dsp(port) == TRUE) {
+		DBG(("success.\n"));
+		return TRUE;
+	} else
+		DBG(("failure.\n"));
+	return FALSE;
+}
+
+static int __init aedsp16_write(int port, int cmd)
+{
+	unsigned char   ret;
+	int             loop = HARDRETRY;
+
+	DBG(("    Write DSP Byte (0x%x) [0x%x]: ", port, cmd));
+
+	do {
+		ret = inb(port + DSP_STATUS);
+		/*
+		 * DSP ready to receive data if bit 7 of ret == 0
+		 */
+		if (!(ret & 0x80)) {
+			outb(cmd, port + DSP_COMMAND);
+			DBG(("success.\n"));
+			return 0;
+		}
+	} while (loop--);
+
+	DBG(("timeout.\n"));
+	printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd);
+
+	return -1;
+}
+
+#if defined(CONFIG_SC6600)
+
+#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
+void __init aedsp16_pinfo(void) {
+	DBG(("\n Base address:  %x\n", decoded_hcfg.iobase));
+	DBG((" Joystick    : %s present\n", decoded_hcfg.joystick?"":" not"));
+	DBG((" WSS addr    :  %x\n", decoded_hcfg.wssbase));
+	DBG((" MPU-401 addr:  %x\n", decoded_hcfg.mpubase));
+	DBG((" CDROM       : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not"));
+	DBG((" CDROMADDR   :  %x\n\n", decoded_hcfg.cdrombase));
+}
+#endif
+
+static void __init aedsp16_hard_decode(void) {
+
+	DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
+
+/*
+ * Decode Cfg Bytes.
+ */
+	decoded_hcfg.iobase	= IOBASE(hard_cfg[0]);
+	decoded_hcfg.joystick	= JOY(hard_cfg[0]);
+	decoded_hcfg.wssbase	= WSSADDR(hard_cfg[0]);
+	decoded_hcfg.mpubase	= MPUADDR(hard_cfg[0]);
+	decoded_hcfg.cdrom	= CDROM(hard_cfg[1]);
+	decoded_hcfg.cdrombase	= CDROMADDR(hard_cfg[1]);
+
+#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
+	printk(" Original sound card configuration:\n");
+	aedsp16_pinfo();
+#endif
+
+/*
+ * Now set up the real kernel configuration.
+ */
+	decoded_hcfg.iobase	= ae_config.base_io;
+	decoded_hcfg.wssbase	= ae_config.mss_base;
+	decoded_hcfg.mpubase	= ae_config.mpu_base;
+
+#if defined(CONFIG_SC6600_JOY)
+ 	decoded_hcfg.joystick	= CONFIG_SC6600_JOY; /* Enable */
+#endif
+#if defined(CONFIG_SC6600_CDROM)
+	decoded_hcfg.cdrom	= CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */
+#endif
+#if defined(CONFIG_SC6600_CDROMBASE)
+	decoded_hcfg.cdrombase	= CONFIG_SC6600_CDROMBASE; /* 0 Disable */
+#endif
+
+#if defined(AEDSP16_DEBUG)
+	DBG((" New Values:\n"));
+	aedsp16_pinfo();
+#endif
+
+	DBG(("success.\n"));
+}
+
+static void __init aedsp16_hard_encode(void) {
+
+	DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
+
+	hard_cfg[0] = 0;
+	hard_cfg[1] = 0;
+
+	hard_cfg[0] |= 0x20;
+
+	BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase);
+	BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase);
+	BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase);
+	BLDJOY(hard_cfg[0], decoded_hcfg.joystick);
+	BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom);
+	BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase);
+
+#if defined(AEDSP16_DEBUG)
+	aedsp16_pinfo();
+#endif
+
+	DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
+	DBG(("success.\n"));
+
+}
+
+static int __init aedsp16_hard_write(int port) {
+
+	DBG(("aedsp16_hard_write:\n"));
+
+	if (aedsp16_write(port, COMMAND_6C)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+	if (aedsp16_write(port, COMMAND_5C)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+	if (aedsp16_write(port, hard_cfg[0])) {
+		printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+	if (aedsp16_write(port, hard_cfg[1])) {
+		printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+	if (aedsp16_write(port, COMMAND_C5)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+
+	DBG(("success.\n"));
+
+	return TRUE;
+}
+
+static int __init aedsp16_hard_read(int port) {
+
+	DBG(("aedsp16_hard_read:\n"));
+
+	if (aedsp16_write(port, READ_HARD_CFG)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+
+	if ((hard_cfg[0] = aedsp16_read(port)) == -1) {
+		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
+			READ_HARD_CFG);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+	if ((hard_cfg[1] = aedsp16_read(port)) == -1) {
+		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
+			READ_HARD_CFG);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+	if (aedsp16_read(port) == -1) {
+		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
+			READ_HARD_CFG);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+
+	DBG(("success.\n"));
+
+	return TRUE;
+}
+
+static int __init aedsp16_ext_cfg_write(int port) {
+
+	int extcfg, val;
+
+	if (aedsp16_write(port, COMMAND_66)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66);
+		return FALSE;
+	}
+
+	extcfg = 7;
+	if (decoded_hcfg.cdrom != 2)
+		extcfg = 0x0F;
+	if ((decoded_hcfg.cdrom == 4) ||
+	    (decoded_hcfg.cdrom == 3))
+		extcfg &= ~2;
+	if (decoded_hcfg.cdrombase == 0)
+		extcfg &= ~2;
+	if (decoded_hcfg.mpubase == 0)
+		extcfg &= ~1;
+
+	if (aedsp16_write(port, extcfg)) {
+		printk("[AEDSP16] Write extcfg: failed!\n");
+		return FALSE;
+	}
+	if (aedsp16_write(port, 0)) {
+		printk("[AEDSP16] Write extcfg: failed!\n");
+		return FALSE;
+	}
+	if (decoded_hcfg.cdrom == 3) {
+		if (aedsp16_write(port, COMMAND_52)) {
+			printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
+			return FALSE;
+		}
+		if ((val = aedsp16_read(port)) == -1) {
+			printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n"
+					, COMMAND_52);
+			return FALSE;
+		}
+		val &= 0x7F;
+		if (aedsp16_write(port, COMMAND_60)) {
+			printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
+			return FALSE;
+		}
+		if (aedsp16_write(port, val)) {
+			printk("[AEDSP16] Write val: failed!\n");
+			return FALSE;
+		}
+	}
+
+	return TRUE;
+}
+
+#endif /* CONFIG_SC6600 */
+
+static int __init aedsp16_cfg_write(int port) {
+	if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
+		return FALSE;
+	}
+	if (aedsp16_write(port, soft_cfg)) {
+		printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n");
+		return FALSE;
+	}
+	return TRUE;
+}
+
+static int __init aedsp16_init_mss(int port)
+{
+	DBG(("aedsp16_init_mss:\n"));
+
+	mdelay(10);
+
+	if (aedsp16_write(port, DSP_INIT_MSS)) {
+		printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n",
+				DSP_INIT_MSS);
+		DBG(("failure.\n"));
+		return FALSE;
+	}
+	
+	mdelay(10);
+
+	if (aedsp16_cfg_write(port) == FALSE)
+		return FALSE;
+
+	outb(soft_cfg_mss, ae_config.mss_base);
+
+	DBG(("success.\n"));
+
+	return TRUE;
+}
+
+static int __init aedsp16_setup_board(int port) {
+	int	loop = RETRY;
+
+#if defined(CONFIG_SC6600)
+	int	val = 0;
+
+	if (aedsp16_hard_read(port) == FALSE) {
+		printk("[AEDSP16] aedsp16_hard_read: failed!\n");
+		return FALSE;
+	}
+
+	if (aedsp16_write(port, COMMAND_52)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
+		return FALSE;
+	}
+
+	if ((val = aedsp16_read(port)) == -1) {
+		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
+				COMMAND_52);
+		return FALSE;
+	}
+#endif
+
+	do {
+		if (aedsp16_write(port, COMMAND_88)) {
+			printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88);
+			return FALSE;
+		}
+		mdelay(10);
+	} while ((aedsp16_wait_data(port) == FALSE) && loop--);
+
+	if (aedsp16_read(port) == -1) {
+		printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
+				COMMAND_88);
+		return FALSE;
+	}
+
+#if !defined(CONFIG_SC6600)
+	if (aedsp16_write(port, COMMAND_5C)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
+		return FALSE;
+	}
+#endif
+
+	if (aedsp16_cfg_write(port) == FALSE)
+		return FALSE;
+
+#if defined(CONFIG_SC6600)
+	if (aedsp16_write(port, COMMAND_60)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
+		return FALSE;
+	}
+	if (aedsp16_write(port, val)) {
+		printk("[AEDSP16] DATA 0x%x: failed!\n", val);
+		return FALSE;
+	}
+	if (aedsp16_write(port, COMMAND_6E)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E);
+		return FALSE;
+	}
+	if (aedsp16_write(port, ver[0])) {
+		printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]);
+		return FALSE;
+	}
+	if (aedsp16_write(port, ver[1])) {
+		printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]);
+		return FALSE;
+	}
+
+	if (aedsp16_hard_write(port) == FALSE) {
+		printk("[AEDSP16] aedsp16_hard_write: failed!\n");
+		return FALSE;
+	}
+
+	if (aedsp16_write(port, COMMAND_5C)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
+		return FALSE;
+	}
+
+#if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET)
+	if (aedsp16_cfg_write(port) == FALSE)
+		return FALSE;
+#endif
+
+#endif
+
+	return TRUE;
+}
+
+static int __init aedsp16_stdcfg(int port) {
+	if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
+		return FALSE;
+	}
+	/*
+	 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
+	 */
+	if (aedsp16_write(port, 0x0A)) {
+		printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
+		return FALSE;
+	}
+	return TRUE;
+}
+
+static int __init aedsp16_dsp_version(int port)
+{
+	int             len = 0;
+	int             ret;
+
+	DBG(("Get DSP Version:\n"));
+
+	if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION);
+		DBG(("failed.\n"));
+		return FALSE;
+	}
+
+	do {
+		if ((ret = aedsp16_read(port)) == -1) {
+			DBG(("failed.\n"));
+			return FALSE;
+		}
+	/*
+	 * We already know how many int are stored (2), so we know when the
+	 * string is finished.
+	 */
+		ver[len++] = ret;
+	  } while (len < CARDVERLEN);
+	sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
+
+	DBG(("success.\n"));
+
+	return TRUE;
+}
+
+static int __init aedsp16_dsp_copyright(int port)
+{
+	int             len = 0;
+	int             ret;
+
+	DBG(("Get DSP Copyright:\n"));
+
+	if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) {
+		printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT);
+		DBG(("failed.\n"));
+		return FALSE;
+	}
+
+	do {
+		if ((ret = aedsp16_read(port)) == -1) {
+	/*
+	 * If no more data available, return to the caller, no error if len>0.
+	 * We have no other way to know when the string is finished.
+	 */
+			if (len)
+				break;
+			else {
+				DBG(("failed.\n"));
+				return FALSE;
+			}
+		}
+
+		DSPCopyright[len++] = ret;
+
+	  } while (len < CARDNAMELEN);
+
+	DBG(("success.\n"));
+
+	return TRUE;
+}
+
+static void __init aedsp16_init_tables(void)
+{
+	int i = 0;
+
+	memset(DSPCopyright, 0, CARDNAMELEN + 1);
+	memset(DSPVersion, 0, CARDVERLEN + 1);
+
+	for (i = 0; orIRQ[i].or; i++)
+		if (orIRQ[i].val == ae_config.irq) {
+			soft_cfg |= orIRQ[i].or;
+			soft_cfg_mss |= orIRQ[i].or;
+		}
+
+	for (i = 0; orMIRQ[i].or; i++)
+		if (orMIRQ[i].or == ae_config.mpu_irq)
+			soft_cfg |= orMIRQ[i].or;
+
+	for (i = 0; orDMA[i].or; i++)
+		if (orDMA[i].val == ae_config.dma) {
+			soft_cfg |= orDMA[i].or;
+			soft_cfg_mss |= orDMA[i].or;
+		}
+}
+
+static int __init aedsp16_init_board(void)
+{
+	aedsp16_init_tables();
+
+	if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) {
+		printk("[AEDSP16] aedsp16_dsp_reset: failed!\n");
+		return FALSE;
+	}
+	if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) {
+		printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n");
+		return FALSE;
+	}
+
+	/*
+	 * My AEDSP16 card return SC-6000 in DSPCopyright, so
+	 * if we have something different, we have to be warned.
+	 */
+	if (strcmp("SC-6000", DSPCopyright))
+		printk("[AEDSP16] Warning: non SC-6000 audio card!\n");
+
+	if (aedsp16_dsp_version(ae_config.base_io) == FALSE) {
+		printk("[AEDSP16] aedsp16_dsp_version: failed!\n");
+		return FALSE;
+	}
+
+	if (aedsp16_stdcfg(ae_config.base_io) == FALSE) {
+		printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
+		return FALSE;
+	}
+
+#if defined(CONFIG_SC6600)
+	if (aedsp16_hard_read(ae_config.base_io) == FALSE) {
+		printk("[AEDSP16] aedsp16_hard_read: failed!\n");
+		return FALSE;
+	}
+
+	aedsp16_hard_decode();
+
+	aedsp16_hard_encode();
+
+	if (aedsp16_hard_write(ae_config.base_io) == FALSE) {
+		printk("[AEDSP16] aedsp16_hard_write: failed!\n");
+		return FALSE;
+	}
+
+	if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) {
+		printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n");
+		return FALSE;
+	}
+#endif /* CONFIG_SC6600 */
+
+	if (aedsp16_setup_board(ae_config.base_io) == FALSE) {
+		printk("[AEDSP16] aedsp16_setup_board: failed!\n");
+		return FALSE;
+	}
+
+	if (ae_config.mss_base != -1) {
+		if (ae_config.init & INIT_MSS) {
+			if (aedsp16_init_mss(ae_config.base_io) == FALSE) {
+				printk("[AEDSP16] Can not initialize"
+				       "Microsoft Sound System mode.\n");
+				return FALSE;
+			}
+		}
+	}
+
+#if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
+
+	printk("Audio Excel DSP 16 init v%s (%s %s) [",
+		VERSION, DSPCopyright,
+		DSPVersion);
+
+	if (ae_config.mpu_base != -1) {
+		if (ae_config.init & INIT_MPU401) {
+			printk("MPU401");
+			if ((ae_config.init & INIT_MSS) ||
+			    (ae_config.init & INIT_SBPRO))
+				printk(" ");
+		}
+	}
+
+	if (ae_config.mss_base == -1) {
+		if (ae_config.init & INIT_SBPRO) {
+			printk("SBPro");
+			if (ae_config.init & INIT_MSS)
+				printk(" ");
+		}
+	}
+
+	if (ae_config.mss_base != -1)
+		if (ae_config.init & INIT_MSS)
+			printk("MSS");
+
+	printk("]\n");
+#endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */
+
+	mdelay(10);
+
+	return TRUE;
+}
+
+static int __init init_aedsp16_sb(void)
+{
+	DBG(("init_aedsp16_sb: "));
+
+/*
+ * If the card is already init'ed MSS, we can not init it to SBPRO too
+ * because the board can not emulate simultaneously MSS and SBPRO.
+ */
+	if (ae_config.init & INIT_MSS)
+		return FALSE;
+	if (ae_config.init & INIT_SBPRO)
+		return FALSE;
+
+	ae_config.init |= INIT_SBPRO;
+
+	DBG(("done.\n"));
+
+	return TRUE;
+}
+
+static void uninit_aedsp16_sb(void)
+{
+	DBG(("uninit_aedsp16_sb: "));
+
+	ae_config.init &= ~INIT_SBPRO;
+
+	DBG(("done.\n"));
+}
+
+static int __init init_aedsp16_mss(void)
+{
+	DBG(("init_aedsp16_mss: "));
+
+/*
+ * If the card is already init'ed SBPRO, we can not init it to MSS too
+ * because the board can not emulate simultaneously MSS and SBPRO.
+ */
+	if (ae_config.init & INIT_SBPRO)
+		return FALSE;
+	if (ae_config.init & INIT_MSS)
+		return FALSE;
+/*
+ * We must allocate the CONFIG_AEDSP16_BASE region too because these are the 
+ * I/O ports to access card's control registers.
+ */
+	if (!(ae_config.init & INIT_MPU401)) {
+		if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
+				"aedsp16 (base)")) {
+			printk(
+			"AEDSP16 BASE I/O port region is already in use.\n");
+			return FALSE;
+		}
+	}
+
+	ae_config.init |= INIT_MSS;
+
+	DBG(("done.\n"));
+
+	return TRUE;
+}
+
+static void uninit_aedsp16_mss(void)
+{
+	DBG(("uninit_aedsp16_mss: "));
+
+	if ((!(ae_config.init & INIT_MPU401)) &&
+	   (ae_config.init & INIT_MSS)) {
+		release_region(ae_config.base_io, IOBASE_REGION_SIZE);
+		DBG(("AEDSP16 base region released.\n"));
+	}
+
+	ae_config.init &= ~INIT_MSS;
+	DBG(("done.\n"));
+}
+
+static int __init init_aedsp16_mpu(void)
+{
+	DBG(("init_aedsp16_mpu: "));
+
+	if (ae_config.init & INIT_MPU401)
+		return FALSE;
+
+/*
+ * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O 
+ * ports to access card's control registers.
+ */
+	if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) {
+		if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
+					"aedsp16 (base)")) {
+			printk(
+			"AEDSP16 BASE I/O port region is already in use.\n");
+			return FALSE;
+		}
+	}
+
+	ae_config.init |= INIT_MPU401;
+
+	DBG(("done.\n"));
+
+	return TRUE;
+}
+
+static void uninit_aedsp16_mpu(void)
+{
+	DBG(("uninit_aedsp16_mpu: "));
+
+	if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) &&
+	   (ae_config.init & INIT_MPU401)) {
+		release_region(ae_config.base_io, IOBASE_REGION_SIZE);
+		DBG(("AEDSP16 base region released.\n"));
+	}
+
+	ae_config.init &= ~INIT_MPU401;
+
+	DBG(("done.\n"));
+}
+
+static int __init init_aedsp16(void)
+{
+	int initialized = FALSE;
+
+	DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n",
+	     ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq));
+
+	if (ae_config.mss_base == -1) {
+		if (init_aedsp16_sb() == FALSE) {
+			uninit_aedsp16_sb();
+		} else {
+			initialized = TRUE;
+		}
+	}
+
+	if (ae_config.mpu_base != -1) {
+		if (init_aedsp16_mpu() == FALSE) {
+			uninit_aedsp16_mpu();
+		} else {
+			initialized = TRUE;
+		}
+	}
+
+/*
+ * In the sequence of init routines, the MSS init MUST be the last!
+ * This because of the special register programming the MSS mode needs.
+ * A board reset would disable the MSS mode restoring the default SBPRO
+ * mode.
+ */
+	if (ae_config.mss_base != -1) {
+		if (init_aedsp16_mss() == FALSE) {
+			uninit_aedsp16_mss();
+		} else {
+			initialized = TRUE;
+		}
+	}
+
+	if (initialized)
+		initialized = aedsp16_init_board();
+	return initialized;
+}
+
+static void __exit uninit_aedsp16(void)
+{
+	if (ae_config.mss_base != -1)
+		uninit_aedsp16_mss();
+	else
+		uninit_aedsp16_sb();
+	if (ae_config.mpu_base != -1)
+		uninit_aedsp16_mpu();
+}
+
+static int __initdata io = -1;
+static int __initdata irq = -1;
+static int __initdata dma = -1;
+static int __initdata mpu_irq = -1;
+static int __initdata mss_base = -1;
+static int __initdata mpu_base = -1;
+
+module_param(io, int, 0);
+MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)");
+module_param(irq, int, 0);
+MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)");
+module_param(dma, int, 0);
+MODULE_PARM_DESC(dma, "dma line (0 1 3)");
+module_param(mpu_irq, int, 0);
+MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)");
+module_param(mss_base, int, 0);
+MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)");
+module_param(mpu_base, int, 0);
+MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)");
+MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>");
+MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION);
+MODULE_LICENSE("GPL");
+
+static int __init do_init_aedsp16(void) {
+	printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n");
+	if (io == -1 || dma == -1 || irq == -1) {
+		printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n");
+		return -EINVAL;
+	}
+
+	ae_config.base_io = io;
+	ae_config.irq = irq;
+	ae_config.dma = dma;
+
+	ae_config.mss_base = mss_base;
+	ae_config.mpu_base = mpu_base;
+	ae_config.mpu_irq = mpu_irq;
+
+	if (init_aedsp16() == FALSE) {
+		printk(KERN_ERR "aedsp16: initialization failed\n");
+		/*
+		 * XXX
+		 * What error should we return here ?
+		 */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void __exit cleanup_aedsp16(void) {
+	uninit_aedsp16();
+}
+
+module_init(do_init_aedsp16);
+module_exit(cleanup_aedsp16);
+
+#ifndef MODULE
+static int __init setup_aedsp16(char *str)
+{
+	/* io, irq, dma, mss_io, mpu_io, mpu_irq */
+	int ints[7];
+	
+	str = get_options(str, ARRAY_SIZE(ints), ints);
+
+	io	 = ints[1];
+	irq	 = ints[2];
+	dma	 = ints[3];
+	mss_base = ints[4];
+	mpu_base = ints[5];
+	mpu_irq	 = ints[6];
+	return 1;
+}
+
+__setup("aedsp16=", setup_aedsp16);
+#endif