summaryrefslogtreecommitdiff
path: root/sound/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /sound/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'sound/Kconfig')
-rw-r--r--sound/Kconfig89
1 files changed, 89 insertions, 0 deletions
diff --git a/sound/Kconfig b/sound/Kconfig
new file mode 100644
index 00000000000..047d59ea057
--- /dev/null
+++ b/sound/Kconfig
@@ -0,0 +1,89 @@
+# sound/Config.in
+#
+
+menu "Sound"
+
+config SOUND
+ tristate "Sound card support"
+ help
+ If you have a sound card in your computer, i.e. if it can say more
+ than an occasional beep, say Y. Be sure to have all the information
+ about your sound card and its configuration down (I/O port,
+ interrupt and DMA channel), because you will be asked for it.
+
+ You want to read the Sound-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. General information about
+ the modular sound system is contained in the files
+ <file:Documentation/sound/oss/Introduction>. The file
+ <file:Documentation/sound/oss/README.OSS> contains some slightly
+ outdated but still useful information as well. Newer sound
+ driver documentation is found in <file:Documentation/sound/alsa/*>.
+
+ If you have a PnP sound card and you want to configure it at boot
+ time using the ISA PnP tools (read
+ <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+ compile the sound card support as a module and load that module
+ after the PnP configuration is finished. To do this, choose M here
+ and read <file:Documentation/sound/oss/README.modules>; the module
+ will be called soundcore.
+
+ I'm told that even without a sound card, you can make your computer
+ say more than an occasional beep, by programming the PC speaker.
+ Kernel patches and supporting utilities to do that are in the pcsp
+ package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+source "sound/oss/dmasound/Kconfig"
+
+if !M68K
+
+menu "Advanced Linux Sound Architecture"
+ depends on SOUND!=n
+
+config SND
+ tristate "Advanced Linux Sound Architecture"
+ depends on SOUND
+
+source "sound/core/Kconfig"
+
+source "sound/drivers/Kconfig"
+
+source "sound/isa/Kconfig"
+
+source "sound/pci/Kconfig"
+
+source "sound/ppc/Kconfig"
+
+source "sound/arm/Kconfig"
+
+source "sound/mips/Kconfig"
+
+# the following will depenend on the order of config.
+# here assuming USB is defined before ALSA
+source "sound/usb/Kconfig"
+
+# the following will depenend on the order of config.
+# here assuming PCMCIA is defined before ALSA
+source "sound/pcmcia/Kconfig"
+
+source "sound/sparc/Kconfig"
+
+source "sound/parisc/Kconfig"
+
+endmenu
+
+menu "Open Sound System"
+ depends on SOUND!=n && (BROKEN || (!SPARC32 && !SPARC64))
+
+config SOUND_PRIME
+ tristate "Open Sound System (DEPRECATED)"
+ depends on SOUND
+ help
+ Say 'Y' or 'M' to enable Open Sound System drivers.
+
+source "sound/oss/Kconfig"
+
+endmenu
+
+endif
+
+endmenu