Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (32 commits)
  USB: serial: no unnecessary GFP_ATOMIC in oti6858
  USB: serial: fix race between unthrottle and completion handler in visor
  USB: serial: fix assumption that throttle/unthrottle cannot sleep
  USB: serial: fix race between unthrottle and completion handler in symbolserial
  USB: serial: fix race between unthrottle and completion handler in opticon
  USB: ehci: Fix isoc scheduling boundary checking.
  USB: storage: When a device returns no sense data, call it a Hardware Error
  USB: small fix in error case of suspend in generic usbserial code
  USB: visor: fix trivial accounting bug in visor driver
  USB: Fix throttling in generic usbserial driver
  USB: cp210x: Add support for the DW700 UART
  USB: ipaq: fix oops when device is plugged in
  USB: isp1362: fix build warnings on 64-bit systems
  USB: gadget: imx_udc: Use resource size
  USB: storage: iRiver P7 UNUSUAL_DEV patch
  USB: musb: make HAVE_CLK support optional
  USB: xhci: Fix dropping endpoints from the xHC schedule.
  USB: xhci: Don't wait for a disable slot cmd when HC dies.
  USB: xhci: Handle canceled URBs when HC dies.
  USB: xhci: Stop debugging polling loop when HC dies.
  ...

34 files changed, 315 insertions, 412 deletions

diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 864f0ba6a34..2473cf0c6b1 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -39,7 +39,7 @@
 #define USBTMC_SIZE_IOBUFFER	2048
 
 /* Default USB timeout (in milliseconds) */
-#define USBTMC_TIMEOUT		10
+#define USBTMC_TIMEOUT		5000
 
 /*
  * Maximum number of read cycles to empty bulk in endpoint during CLEAR and
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index c52a681f376..01ee0b9bc95 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1402,7 +1402,8 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 	struct clk *clk;
 	void __iomem *base;
 	int ret = 0;
-	int i, res_size;
+	int i;
+	resource_size_t res_size;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -1416,7 +1417,7 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	res_size = res->end - res->start + 1;
+	res_size = resource_size(res);
 	if (!request_mem_region(res->start, res_size, res->name)) {
 		dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n",
 			res_size, res->start);
@@ -1527,8 +1528,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
 	clk_disable(imx_usb->clk);
 	iounmap(imx_usb->base);
 
-	release_mem_region(imx_usb->res->start,
-		imx_usb->res->end - imx_usb->res->start + 1);
+	release_mem_region(imx_usb->res->start, resource_size(imx_usb->res));
 
 	if (pdata->exit)
 		pdata->exit(&pdev->dev);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 3ea05936851..3efa59b1804 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1425,6 +1425,7 @@ iso_stream_schedule (
 			status = -EFBIG;
 			goto fail;
 		}
+		stream->next_uframe = start;
 		goto ready;
 	}
 
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index e35d82808ba..5c774ab9825 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2284,10 +2284,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
 	dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
 	dev_info(hcd->self.controller, "  ISTL:    2 * %4d:     %4d @ $%04x:$%04x\n",
 		 istl_size / 2, istl_size, 0, istl_size / 2);
-	dev_info(hcd->self.controller, "  INTL: %4d * (%3u+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  INTL: %4d * (%3lu+8):  %4d @ $%04x\n",
 		 ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
 		 intl_size, istl_size);
-	dev_info(hcd->self.controller, "  ATL : %4d * (%3u+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  ATL : %4d * (%3lu+8):  %4d @ $%04x\n",
 		 atl_buffers, atl_blksize - PTD_HEADER_SIZE,
 		 atl_size, istl_size + intl_size);
 	dev_info(hcd->self.controller, "  USED/FREE:   %4d      %4d\n", total,
@@ -2677,12 +2677,12 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
 	DBG(0, "%s: Removing HCD\n", __func__);
 	usb_remove_hcd(hcd);
 
-	DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__,
-	    (u32)isp1362_hcd->data_reg);
+	DBG(0, "%s: Unmapping data_reg @ %p\n", __func__,
+	    isp1362_hcd->data_reg);
 	iounmap(isp1362_hcd->data_reg);
 
-	DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__,
-	    (u32)isp1362_hcd->addr_reg);
+	DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__,
+	    isp1362_hcd->addr_reg);
 	iounmap(isp1362_hcd->addr_reg);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -2810,16 +2810,16 @@ static int __init isp1362_probe(struct platform_device *pdev)
 	return 0;
 
  err6:
-	DBG(0, "%s: Freeing dev %08x\n", __func__, (u32)isp1362_hcd);
+	DBG(0, "%s: Freeing dev %p\n", __func__, isp1362_hcd);
 	usb_put_hcd(hcd);
  err5:
-	DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__, (u32)data_reg);
+	DBG(0, "%s: Unmapping data_reg @ %p\n", __func__, data_reg);
 	iounmap(data_reg);
  err4:
 	DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)data->start);
 	release_mem_region(data->start, resource_len(data));
  err3:
-	DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__, (u32)addr_reg);
+	DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__, addr_reg);
 	iounmap(addr_reg);
  err2:
 	DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)addr->start);
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index fe60f62a32f..1a253ebf7e5 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -580,7 +580,7 @@ static inline const char *ISP1362_INT_NAME(int n)
 
 static inline void ALIGNSTAT(struct isp1362_hcd *isp1362_hcd, void *ptr)
 {
-	unsigned p = (unsigned)ptr;
+	unsigned long p = (unsigned long)ptr;
 	if (!(p & 0xf))
 		isp1362_hcd->stat16++;
 	else if (!(p & 0x7))
@@ -770,7 +770,7 @@ static void isp1362_write_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 l
 	if (!len)
 		return;
 
-	if ((unsigned)dp & 0x1) {
+	if ((unsigned long)dp & 0x1) {
 		/* not aligned */
 		for (; len > 1; len -= 2) {
 			data = *dp++;
@@ -962,8 +962,8 @@ static void isp1362_read_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16
 
 	isp1362_write_diraddr(isp1362_hcd, offset, len);
 
-	DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %08x\n", __func__,
-	    len, offset, (u32)buf);
+	DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %p\n",
+	    __func__, len, offset, buf);
 
 	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
 	_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
@@ -982,8 +982,8 @@ static void isp1362_write_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16
 
 	isp1362_write_diraddr(isp1362_hcd, offset, len);
 
-	DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %08x\n", __func__,
-	    len, offset, (u32)buf);
+	DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %p\n",
+	    __func__, len, offset, buf);
 
 	isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
 	_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index 99911e727e0..932f9993848 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -335,6 +335,12 @@ void xhci_event_ring_work(unsigned long arg)
 	spin_lock_irqsave(&xhci->lock, flags);
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
 	xhci_dbg(xhci, "op reg status = 0x%x\n", temp);
+	if (temp == 0xffffffff) {
+		xhci_dbg(xhci, "HW died, polling stopped.\n");
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
+	}
+
 	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
 	xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
 	xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled);
@@ -776,6 +782,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
 	unsigned long flags;
 	int ret;
+	u32 temp;
 	struct xhci_hcd *xhci;
 	struct xhci_td *td;
 	unsigned int ep_index;
@@ -788,6 +795,17 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
 	if (ret || !urb->hcpriv)
 		goto done;
+	temp = xhci_readl(xhci, &xhci->op_regs->status);
+	if (temp == 0xffffffff) {
+		xhci_dbg(xhci, "HW died, freeing TD.\n");
+		td = (struct xhci_td *) urb->hcpriv;
+
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN);
+		kfree(td);
+		return ret;
+	}
 
 	xhci_dbg(xhci, "Cancel URB %p\n", urb);
 	xhci_dbg(xhci, "Event ring:\n");
@@ -877,7 +895,7 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	ctrl_ctx->drop_flags |= drop_flag;
 	new_drop_flags = ctrl_ctx->drop_flags;
 
-	ctrl_ctx->add_flags = ~drop_flag;
+	ctrl_ctx->add_flags &= ~drop_flag;
 	new_add_flags = ctrl_ctx->add_flags;
 
 	last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
@@ -1410,11 +1428,20 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	unsigned long flags;
+	u32 state;
 
 	if (udev->slot_id == 0)
 		return;
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	/* Don't disable the slot if the host controller is dead. */
+	state = xhci_readl(xhci, &xhci->op_regs->status);
+	if (state == 0xffffffff) {
+		xhci_free_virt_device(xhci, udev->slot_id);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
+	}
+
 	if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 29092b8e59c..4fb120357c5 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -313,7 +313,8 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 
 	if (le16_to_cpu(dev->udev->descriptor.idProduct) != 0x0001) {
 		dev_warn(&interface->dev, "USBLCD model not supported.\n");
-		return -ENODEV;
+		retval = -ENODEV;
+		goto error;
 	}
 	
 	/* set up the endpoint information */
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 803adcb5ac1..760e7271d17 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -8,7 +8,7 @@ comment "Enable Host or Gadget support to see Inventra options"
 
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
-	depends on (USB || USB_GADGET) && HAVE_CLK
+	depends on (USB || USB_GADGET)
 	depends on !SUPERH
 	select NOP_USB_XCEIV if ARCH_DAVINCI
 	select TWL4030_USB if MACH_OMAP_3430SDP
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index f2f66ebc736..fcec87ea709 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -14,7 +14,6 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 381d648a36b..6aa5f22e527 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -95,6 +95,13 @@ struct musb_ep;
 #endif
 #endif	/* need MUSB gadget selection */
 
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id)	NULL
+#define clk_put(clock)		do {} while (0)
+#define clk_enable(clock)	do {} while (0)
+#define clk_disable(clock)	do {} while (0)
+#endif
 
 #ifdef CONFIG_PROC_FS
 #include <linux/fs.h>
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index fbfd3fd9ce1..cc1d71b57d3 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -439,15 +439,6 @@ static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
 /* Not implemented - HW has seperate Tx/Rx FIFO */
 #define MUSB_TXCSR_MODE			0x0000
 
-/*
- * Dummy stub for clk framework, it will be removed
- * until Blackfin supports clk framework
- */
-#define clk_get(dev, id)	NULL
-#define clk_put(clock)		do {} while (0)
-#define clk_enable(clock)	do {} while (0)
-#define clk_disable(clock)	do {} while (0)
-
 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
 {
 }
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 2cbfab3716e..b10ac840941 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -554,13 +554,12 @@ static void aircable_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
+	spin_lock_irq(&priv->rx_lock);
 	priv->rx_flags |= THROTTLED;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_unlock_irq(&priv->rx_lock);
 }
 
 /* Based on ftdi_sio.c unthrottle */
@@ -569,14 +568,13 @@ static void aircable_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled;
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
+	spin_lock_irq(&priv->rx_lock);
 	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
 	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_unlock_irq(&priv->rx_lock);
 
 	if (actually_throttled)
 		schedule_work(&priv->rx_work);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4a208fe85bc..698252a4dc5 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -113,6 +113,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e0a8b715f2f..a591ebec0f8 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1155,13 +1155,12 @@ static void cypress_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->rx_flags = THROTTLED;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 }
 
 
@@ -1170,14 +1169,13 @@ static void cypress_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled, result;
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
 	priv->rx_flags = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 
 	if (!priv->comm_is_ok)
 		return;
@@ -1185,7 +1183,7 @@ static void cypress_unthrottle(struct tty_struct *tty)
 	if (actually_throttled) {
 		port->interrupt_in_urb->dev = port->serial->dev;
 
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (result) {
 			dev_err(&port->dev, "%s - failed submitting read urb, "
 					"error %d\n", __func__, result);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index ab3dd991586..68e80be6b9e 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -898,16 +898,16 @@ static void digi_rx_unthrottle(struct tty_struct *tty)
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
-	/* turn throttle off */
-	priv->dp_throttled = 0;
-	priv->dp_throttle_restart = 0;
-
 	/* restart read chain */
 	if (priv->dp_throttle_restart) {
 		port->read_urb->dev = port->serial->dev;
 		ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	}
 
+	/* turn throttle off */
+	priv->dp_throttled = 0;
+	priv->dp_throttle_restart = 0;
+
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 
 	if (ret)
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 33c9e9cf9eb..7dd0e3eadbe 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -391,7 +391,7 @@ static void empeg_unthrottle(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
 			"%s - failed submitting read urb, error %d\n",
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4f883b1773d..9c60d6d4908 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -76,13 +76,7 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
-	__u8 rx_flags;		/* receive state flags (throttling) */
-	spinlock_t rx_lock;	/* spinlock for receive state */
-	struct delayed_work rx_work;
 	struct usb_serial_port *port;
-	int rx_processed;
-	unsigned long rx_bytes;
-
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
 				   (0 for FT232/245) */
 
@@ -737,10 +731,6 @@ static const char *ftdi_chip_name[] = {
 /* Constants for read urb and write urb */
 #define BUFSZ 512
 
-/* rx_flags */
-#define THROTTLED		0x01
-#define ACTUALLY_THROTTLED	0x02
-
 /* Used for TIOCMIWAIT */
 #define FTDI_STATUS_B0_MASK	(FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
 #define FTDI_STATUS_B1_MASK	(FTDI_RS_BI)
@@ -763,7 +753,7 @@ static int  ftdi_write_room(struct tty_struct *tty);
 static int  ftdi_chars_in_buffer(struct tty_struct *tty);
 static void ftdi_write_bulk_callback(struct urb *urb);
 static void ftdi_read_bulk_callback(struct urb *urb);
-static void ftdi_process_read(struct work_struct *work);
+static void ftdi_process_read(struct usb_serial_port *port);
 static void ftdi_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int  ftdi_tiocmget(struct tty_struct *tty, struct file *file);
@@ -1234,7 +1224,6 @@ static int set_serial_info(struct tty_struct *tty,
 					(new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
-	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	write_latency_timer(port);
 
 check_and_exit:
@@ -1527,7 +1516,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	}
 
 	kref_init(&priv->kref);
-	spin_lock_init(&priv->rx_lock);
 	spin_lock_init(&priv->tx_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
@@ -1549,7 +1537,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 		port->read_urb->transfer_buffer_length = BUFSZ;
 	}
 
-	INIT_DELAYED_WORK(&priv->rx_work, ftdi_process_read);
 	priv->port = port;
 
 	/* Free port's existing write urb and transfer buffer. */
@@ -1686,6 +1673,26 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
+static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
+{
+	struct urb *urb = port->read_urb;
+	struct usb_serial *serial = port->serial;
+	int result;
+
+	usb_fill_bulk_urb(urb, serial->dev,
+			   usb_rcvbulkpipe(serial->dev,
+					port->bulk_in_endpointAddress),
+			   urb->transfer_buffer,
+			   urb->transfer_buffer_length,
+			   ftdi_read_bulk_callback, port);
+	result = usb_submit_urb(urb, mem_flags);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
+	return result;
+}
+
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
@@ -1700,12 +1707,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	priv->tx_bytes = 0;
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_bytes = 0;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
-
-	if (tty)
-		tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	write_latency_timer(port);
 
@@ -1725,23 +1726,14 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 		ftdi_set_termios(tty, port, tty->termios);
 
 	/* Not throttled */
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttled = 0;
+	port->throttle_req = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* Start reading from the device */
-	priv->rx_processed = 0;
-	usb_fill_bulk_urb(port->read_urb, dev,
-			usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-				port->read_urb->transfer_buffer_length,
-			ftdi_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-	else
+	result = ftdi_submit_read_urb(port, GFP_KERNEL);
+	if (!result)
 		kref_get(&priv->kref);
 
 	return result;
@@ -1787,10 +1779,6 @@ static void ftdi_close(struct usb_serial_port *port)
 
 	dbg("%s", __func__);
 
-
-	/* cancel any scheduled reading */
-	cancel_delayed_work_sync(&priv->rx_work);
-
 	/* shutdown our bulk read */
 	usb_kill_urb(port->read_urb);
 	kref_put(&priv->kref, ftdi_sio_priv_release);
@@ -2013,271 +2001,121 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty)
 	return buffered;
 }
 
-static void ftdi_read_bulk_callback(struct urb *urb)
+static int ftdi_process_packet(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ftdi_private *priv,
+		char *packet, int len)
 {
-	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty;
-	struct ftdi_private *priv;
-	unsigned long countread;
-	unsigned long flags;
-	int status = urb->status;
-
-	if (urb->number_of_packets > 0) {
-		dev_err(&port->dev, "%s transfer_buffer_length %d "
-			"actual_length %d number of packets %d\n", __func__,
-			urb->transfer_buffer_length,
-			urb->actual_length, urb->number_of_packets);
-		dev_err(&port->dev, "%s transfer_flags %x\n", __func__,
-			urb->transfer_flags);
-	}
+	int i;
+	char status;
+	char flag;
+	char *ch;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->port.count <= 0)
-		return;
-
-	tty = tty_port_tty_get(&port->port);
-	if (!tty) {
-		dbg("%s - bad tty pointer - exiting", __func__);
-		return;
+	if (len < 2) {
+		dbg("malformed packet");
+		return 0;
 	}
 
-	priv = usb_get_serial_port_data(port);
-	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __func__);
-		goto out;
+	/* Compare new line status to the old one, signal if different/
+	   N.B. packet may be processed more than once, but differences
+	   are only processed once.  */
+	status = packet[0] & FTDI_STATUS_B0_MASK;
+	if (status != priv->prev_status) {
+		priv->diff_status |= status ^ priv->prev_status;
+		wake_up_interruptible(&priv->delta_msr_wait);
+		priv->prev_status = status;
 	}
 
-	if (urb != port->read_urb)
-		dev_err(&port->dev, "%s - Not my urb!\n", __func__);
-
-	if (status) {
-		/* This will happen at close every time so it is a dbg not an
-		   err */
-		dbg("(this is ok on close) nonzero read bulk status received: %d", status);
-		goto out;
+	/*
+	 * Although the device uses a bitmask and hence can have multiple
+	 * errors on a packet - the order here sets the priority the error is
+	 * returned to the tty layer.
+	 */
+	flag = TTY_NORMAL;
+	if (packet[1] & FTDI_RS_OE) {
+		flag = TTY_OVERRUN;
+		dbg("OVERRRUN error");
+	}
+	if (packet[1] & FTDI_RS_BI) {
+		flag = TTY_BREAK;
+		dbg("BREAK received");
+		usb_serial_handle_break(port);
+	}
+	if (packet[1] & FTDI_RS_PE) {
+		flag = TTY_PARITY;
+		dbg("PARITY error");
+	}
+	if (packet[1] & FTDI_RS_FE) {
+		flag = TTY_FRAME;
+		dbg("FRAMING error");
 	}
 
-	/* count data bytes, but not status bytes */
-	countread = urb->actual_length;
-	countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size);
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_bytes += countread;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
-
-	ftdi_process_read(&priv->rx_work.work);
-out:
-	tty_kref_put(tty);
-} /* ftdi_read_bulk_callback */
-
+	len -= 2;
+	if (!len)
+		return 0;	/* status only */
+	ch = packet + 2;
+
+	if (!(port->console && port->sysrq) && flag == TTY_NORMAL)
+		tty_insert_flip_string(tty, ch, len);
+	else {
+		for (i = 0; i < len; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+				tty_insert_flip_char(tty, *ch, flag);
+		}
+	}
+	return len;
+}
 
-static void ftdi_process_read(struct work_struct *work)
-{ /* ftdi_process_read */
-	struct ftdi_private *priv =
-		container_of(work, struct ftdi_private, rx_work.work);
-	struct usb_serial_port *port = priv->port;
-	struct urb *urb;
+static void ftdi_process_read(struct usb_serial_port *port)
+{
+	struct urb *urb = port->read_urb;
 	struct tty_struct *tty;
-	char error_flag;
-	unsigned char *data;
-
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char *data = (char *)urb->transfer_buffer;
 	int i;
-	int result;
-	int need_flip;
-	int packet_offset;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (port->port.count <= 0)
-		return;
+	int len;
+	int count = 0;
 
 	tty = tty_port_tty_get(&port->port);
-	if (!tty) {
-		dbg("%s - bad tty pointer - exiting", __func__);
+	if (!tty)
 		return;
-	}
-
-	priv = usb_get_serial_port_data(port);
-	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __func__);
-		goto out;
-	}
-
-	urb = port->read_urb;
-	if (!urb) {
-		dbg("%s - bad read_urb pointer - exiting", __func__);
-		goto out;
-	}
-
-	data = urb->transfer_buffer;
 
-	if (priv->rx_processed) {
-		dbg("%s - already processed: %d bytes, %d remain", __func__,
-				priv->rx_processed,
-				urb->actual_length - priv->rx_processed);
-	} else {
-		/* The first two bytes of every read packet are status */
-		if (urb->actual_length > 2)
-			usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-		else
-			dbg("Status only: %03oo %03oo", data[0], data[1]);
+	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+		count += ftdi_process_packet(tty, port, priv, &data[i], len);
 	}
 
-
-	/* TO DO -- check for hung up line and handle appropriately: */
-	/*   send hangup  */
-	/* See acm.c - you do a tty_hangup  - eg tty_hangup(tty) */
-	/* if CD is dropped and the line is not CLOCAL then we should hangup */
-
-	need_flip = 0;
-	for (packet_offset = priv->rx_processed;
-		packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) {
-		int length;
-
-		/* Compare new line status to the old one, signal if different/
-		   N.B. packet may be processed more than once, but differences
-		   are only processed once.  */
-		char new_status = data[packet_offset + 0] &
-						FTDI_STATUS_B0_MASK;
-		if (new_status != priv->prev_status) {
-			priv->diff_status |=
-				new_status ^ priv->prev_status;
-			wake_up_interruptible(&priv->delta_msr_wait);
-			priv->prev_status = new_status;
-		}
-
-		length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2;
-		if (length < 0) {
-			dev_err(&port->dev, "%s - bad packet length: %d\n",
-				__func__, length+2);
-			length = 0;
-		}
-
-		if (priv->rx_flags & THROTTLED) {
-			dbg("%s - throttled", __func__);
-			break;
-		}
-		if (tty_buffer_request_room(tty, length) < length) {
-			/* break out & wait for throttling/unthrottling to
-			   happen */
-			dbg("%s - receive room low", __func__);
-			break;
-		}
-
-		/* Handle errors and break */
-		error_flag = TTY_NORMAL;
-		/* Although the device uses a bitmask and hence can have
-		   multiple errors on a packet - the order here sets the
-		   priority the error is returned to the tty layer  */
-
-		if (data[packet_offset+1] & FTDI_RS_OE) {
-			error_flag = TTY_OVERRUN;
-			dbg("OVERRRUN error");
-		}
-		if (data[packet_offset+1] & FTDI_RS_BI) {
-			error_flag = TTY_BREAK;
-			dbg("BREAK received");
-			usb_serial_handle_break(port);
-		}
-		if (data[packet_offset+1] & FTDI_RS_PE) {
-			error_flag = TTY_PARITY;
-			dbg("PARITY error");
-		}
-		if (data[packet_offset+1] & FTDI_RS_FE) {
-			error_flag = TTY_FRAME;
-			dbg("FRAMING error");
-		}
-		if (length > 0) {
-			for (i = 2; i < length+2; i++) {
-				/* Note that the error flag is duplicated for
-				   every character received since we don't know
-				   which character it applied to */
-				if (!usb_serial_handle_sysrq_char(tty, port,
-						data[packet_offset + i]))
-					tty_insert_flip_char(tty,
-						data[packet_offset + i],
-						error_flag);
-			}
-			need_flip = 1;
-		}
-
-#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
-		/* if a parity error is detected you get status packets forever
-		   until a character is sent without a parity error.
-		   This doesn't work well since the application receives a
-		   never ending stream of bad data - even though new data
-		   hasn't been sent. Therefore I (bill) have taken this out.
-		   However - this might make sense for framing errors and so on
-		   so I am leaving the code in for now.
-		*/
-		else {
-			if (error_flag != TTY_NORMAL) {
-				dbg("error_flag is not normal");
-				/* In this case it is just status - if that is
-				   an error send a bad character */
-				if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-					tty_flip_buffer_push(tty);
-				tty_insert_flip_char(tty, 0xff, error_flag);
-				need_flip = 1;
-			}
-		}
-#endif
-	} /* "for(packet_offset=0..." */
-
-	/* Low latency */
-	if (need_flip)
+	if (count)
 		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
 
-	if (packet_offset < urb->actual_length) {
-		/* not completely processed - record progress */
-		priv->rx_processed = packet_offset;
-		dbg("%s - incomplete, %d bytes processed, %d remain",
-				__func__, packet_offset,
-				urb->actual_length - packet_offset);
-		/* check if we were throttled while processing */
-		spin_lock_irqsave(&priv->rx_lock, flags);
-		if (priv->rx_flags & THROTTLED) {
-			priv->rx_flags |= ACTUALLY_THROTTLED;
-			spin_unlock_irqrestore(&priv->rx_lock, flags);
-			dbg("%s - deferring remainder until unthrottled",
-					__func__);
-			goto out;
-		}
-		spin_unlock_irqrestore(&priv->rx_lock, flags);
-		/* if the port is closed stop trying to read */
-		if (port->port.count > 0)
-			/* delay processing of remainder */
-			schedule_delayed_work(&priv->rx_work, 1);
-		else
-			dbg("%s - port is closed", __func__);
-		goto out;
-	}
-
-	/* urb is completely processed */
-	priv->rx_processed = 0;
+static void ftdi_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned long flags;
 
-	/* if the port is closed stop trying to read */
-	if (port->port.count > 0) {
-		/* Continue trying to always read  */
-		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			usb_rcvbulkpipe(port->serial->dev,
-					port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-			port->read_urb->transfer_buffer_length,
-			ftdi_read_bulk_callback, port);
+	dbg("%s - port %d", __func__, port->number);
 
-		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed resubmitting read urb, error %d\n",
-				__func__, result);
+	if (urb->status) {
+		dbg("%s - nonzero read bulk status received: %d",
+						__func__, urb->status);
+		return;
 	}
-out:
-	tty_kref_put(tty);
-} /* ftdi_process_read */
 
+	usb_serial_debug_data(debug, &port->dev, __func__,
+				urb->actual_length, urb->transfer_buffer);
+	ftdi_process_read(port);
+
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttled = port->throttle_req;
+	if (!port->throttled) {
+		spin_unlock_irqrestore(&port->lock, flags);
+		ftdi_submit_read_urb(port, GFP_ATOMIC);
+	} else
+		spin_unlock_irqrestore(&port->lock, flags);
+}
 
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
@@ -2609,33 +2447,31 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 static void ftdi_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_flags |= THROTTLED;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttle_req = 1;
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-
-static void ftdi_unthrottle(struct tty_struct *tty)
+void ftdi_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int actually_throttled;
+	int was_throttled;
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	was_throttled = port->throttled;
+	port->throttled = port->throttle_req = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
 
-	if (actually_throttled)
-		schedule_delayed_work(&priv->rx_work, 0);
+	/* Resubmit urb if throttled and open. */
+	if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		ftdi_submit_read_urb(port, GFP_KERNEL);
 }
 
 static int __init ftdi_init(void)
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 20432d34552..5ac900e5a50 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1390,14 +1390,13 @@ static void garmin_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 	/* set flag, data received will be put into a queue
 	   for later processing */
-	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	spin_lock_irq(&garmin_data_p->lock);
 	garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED;
-	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+	spin_unlock_irq(&garmin_data_p->lock);
 }
 
 
@@ -1405,13 +1404,12 @@ static void garmin_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
-	unsigned long flags;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irqsave(&garmin_data_p->lock, flags);
+	spin_lock_irq(&garmin_data_p->lock);
 	garmin_data_p->flags &= ~FLAGS_THROTTLED;
-	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+	spin_unlock_irq(&garmin_data_p->lock);
 
 	/* in native mode send queued data to tty, in
 	   serial mode nothing needs to be done here */
@@ -1419,7 +1417,7 @@ static void garmin_unthrottle(struct tty_struct *tty)
 		garmin_flush_queue(garmin_data_p);
 
 	if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
-		status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (status)
 			dev_err(&port->dev,
 				"%s - failed resubmitting read urb, error %d\n",
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index deba08c7a01..bbe005cefcf 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -546,7 +546,7 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
 
 	if (was_throttled) {
 		/* Resume reading from device */
-		usb_serial_generic_resubmit_read_urb(port, GFP_KERNEL);
+		flush_and_resubmit_read_urb(port);
 	}
 }
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 24fcc64b837..d6231c38813 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -966,6 +966,15 @@ static int ipaq_calc_num_ports(struct usb_serial *serial)
 static int ipaq_startup(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
+
+	/* Some of the devices in ipaq_id_table[] are composite, and we
+	 * shouldn't bind to all the interfaces.  This test will rule out
+	 * some obviously invalid possibilities.
+	 */
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports)
+		return -ENODEV;
+
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
 		/*
 		 * FIXME: HP iPaq rx3715, possibly others, have 1 config that
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 257c16cc6b2..1296a097f5c 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -290,7 +290,7 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
 	/* just restart the receive interrupt URB */
 	dbg("keyspan_pda_rx_unthrottle port %d", port->number);
 	port->interrupt_in_urb->dev = port->serial->dev;
-	if (usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC))
+	if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
 		dbg(" usb_submit_urb(read urb) failed");
 	return;
 }
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index f7373371b13..3a7873806f4 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -951,7 +951,7 @@ static void klsi_105_unthrottle(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
 			"%s - failed submitting read urb, error %d\n",
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ad4998bbf16..cd009cb280a 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -777,20 +777,19 @@ static void mct_u232_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	unsigned int control_state;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->rx_flags |= THROTTLED;
 	if (C_CRTSCTS(tty)) {
 		priv->control_state &= ~TIOCM_RTS;
 		control_state = priv->control_state;
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irq(&priv->lock);
 		(void) mct_u232_set_modem_ctrl(port->serial, control_state);
 	} else {
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irq(&priv->lock);
 	}
 }
 
@@ -799,20 +798,19 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	unsigned int control_state;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
 		priv->rx_flags &= ~THROTTLED;
 		priv->control_state |= TIOCM_RTS;
 		control_state = priv->control_state;
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irq(&priv->lock);
 		(void) mct_u232_set_modem_ctrl(port->serial, control_state);
 	} else {
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irq(&priv->lock);
 	}
 }
 
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 1085a577c5c..80f59b6350c 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -314,21 +314,24 @@ static void opticon_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
-	int result;
+	int result, was_throttled;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->throttled = false;
+	was_throttled = priv->actually_throttled;
 	priv->actually_throttled = false;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	priv->bulk_read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
+	if (was_throttled) {
+		result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
+		if (result)
+			dev_err(&port->dev,
+				"%s - failed submitting read urb, error %d\n",
 							__func__, result);
+	}
 }
 
 static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f66e3988321..43c22702756 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -165,6 +165,7 @@ static int  option_resume(struct usb_serial *serial);
 #define HUAWEI_PRODUCT_E143D			0x143D
 #define HUAWEI_PRODUCT_E143E			0x143E
 #define HUAWEI_PRODUCT_E143F			0x143F
+#define HUAWEI_PRODUCT_E14AC			0x14AC
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -318,6 +319,7 @@ static int  option_resume(struct usb_serial *serial);
 /* TOSHIBA PRODUCTS */
 #define TOSHIBA_VENDOR_ID			0x0930
 #define TOSHIBA_PRODUCT_HSDPA_MINICARD		0x1302
+#define TOSHIBA_PRODUCT_G450			0x0d45
 
 #define ALINK_VENDOR_ID				0x1e0e
 #define ALINK_PRODUCT_3GU			0x9200
@@ -424,6 +426,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
@@ -581,6 +584,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
+	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
 	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 0f4a70ce382..c644e26394b 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -288,7 +288,7 @@ static void setup_line(struct work_struct *work)
 
 	dbg("%s(): submitting interrupt urb", __func__);
 	port->interrupt_in_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 				" with error %d\n", __func__, result);
@@ -335,7 +335,7 @@ void send_data(struct work_struct *work)
 
 		dbg("%s(): submitting interrupt urb", __func__);
 		port->interrupt_in_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 		if (result != 0) {
 			dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 				" with error %d\n", __func__, result);
@@ -349,7 +349,7 @@ void send_data(struct work_struct *work)
 
 	port->write_urb->transfer_buffer_length = count;
 	port->write_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->write_urb, GFP_NOIO);
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1128e01525b..9ec1a49e236 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1046,13 +1046,15 @@ static void pl2303_push_data(struct tty_struct *tty,
 	/* overrun is special, not associated with a char */
 	if (line_status & UART_OVERRUN_ERROR)
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-	if (port->console && port->sysrq) {
+
+	if (tty_flag == TTY_NORMAL && !(port->console && port->sysrq))
+		tty_insert_flip_string(tty, data, urb->actual_length);
+	else {
 		int i;
 		for (i = 0; i < urb->actual_length; ++i)
 			if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
 				tty_insert_flip_char(tty, data[i], tty_flag);
-	} else
-		tty_insert_flip_string(tty, data, urb->actual_length);
+	}
 	tty_flip_buffer_push(tty);
 }
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 8c075b2416b..45883988a00 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -17,7 +17,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.3.7"
+#define DRIVER_VERSION "v.1.3.8"
 #define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index cb7e95f9fcb..b282c0f2d8e 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -165,34 +165,36 @@ static void symbol_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->throttled = true;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 }
 
 static void symbol_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
-	unsigned long flags;
 	int result;
+	bool was_throttled;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->throttled = false;
+	was_throttled = priv->actually_throttled;
 	priv->actually_throttled = false;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 
 	priv->int_urb->dev = port->serial->dev;
-	result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
+	if (was_throttled) {
+		result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
+		if (result)
+			dev_err(&port->dev,
+				"%s - failed submitting read urb, error %d\n",
 							__func__, result);
+	}
 }
 
 static int symbol_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index aa6b2ae951a..bd3fa7ff15b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -156,7 +156,8 @@ static void destroy_serial(struct kref *kref)
 	if (serial->minor != SERIAL_TTY_NO_MINOR)
 		return_serial(serial);
 
-	serial->type->release(serial);
+	if (serial->attached)
+		serial->type->release(serial);
 
 	/* Now that nothing is using the ports, they can be freed */
 	for (i = 0; i < serial->num_port_pointers; ++i) {
@@ -1059,12 +1060,15 @@ int usb_serial_probe(struct usb_interface *interface,
 		module_put(type->driver.owner);
 		if (retval < 0)
 			goto probe_error;
+		serial->attached = 1;
 		if (retval > 0) {
 			/* quietly accept this device, but don't bind to a
 			   serial port as it's about to disappear */
 			serial->num_ports = 0;
 			goto exit;
 		}
+	} else {
+		serial->attached = 1;
 	}
 
 	if (get_free_serial(serial, num_ports, &minor) == NULL) {
@@ -1164,8 +1168,10 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
 
 	if (serial->type->suspend) {
 		r = serial->type->suspend(serial, message);
-		if (r < 0)
+		if (r < 0) {
+			serial->suspending = 0;
 			goto err_out;
+		}
 	}
 
 	for (i = 0; i < serial->num_ports; ++i) {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 1aa5d20a5d9..ad1f9232292 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -513,7 +513,8 @@ static void visor_read_bulk_callback(struct urb *urb)
 			tty_kref_put(tty);
 		}
 		spin_lock(&priv->lock);
-		priv->bytes_in += available_room;
+		if (tty)
+			priv->bytes_in += available_room;
 
 	} else {
 		spin_lock(&priv->lock);
@@ -582,12 +583,11 @@ static void visor_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->throttled = 1;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 }
 
 
@@ -595,21 +595,23 @@ static void visor_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	int result;
+	int result, was_throttled;
 
 	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irq(&priv->lock);
 	priv->throttled = 0;
+	was_throttled = priv->actually_throttled;
 	priv->actually_throttled = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irq(&priv->lock);
 
-	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
+	if (was_throttled) {
+		port->read_urb->dev = port->serial->dev;
+		result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+		if (result)
+			dev_err(&port->dev,
+				"%s - failed submitting read urb, error %d\n",
 							__func__, result);
+	}
 }
 
 static int palm_os_3_probe(struct usb_serial *serial,
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 62424eec33e..1093d2eb046 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -949,13 +949,12 @@ static void whiteheat_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&info->lock, flags);
+	spin_lock_irq(&info->lock);
 	info->flags |= THROTTLED;
-	spin_unlock_irqrestore(&info->lock, flags);
+	spin_unlock_irq(&info->lock);
 
 	return;
 }
@@ -966,14 +965,13 @@ static void whiteheat_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	int actually_throttled;
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&info->lock, flags);
+	spin_lock_irq(&info->lock);
 	actually_throttled = info->flags & ACTUALLY_THROTTLED;
 	info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&info->lock, flags);
+	spin_unlock_irq(&info->lock);
 
 	if (actually_throttled)
 		rx_data_softint(&info->rx_work);
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index e20dc525d17..3a4fb023af7 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -768,17 +768,32 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		/* set the result so the higher layers expect this data */
 		srb->result = SAM_STAT_CHECK_CONDITION;
 
-		/* If things are really okay, then let's show that.  Zero
-		 * out the sense buffer so the higher layers won't realize
-		 * we did an unsolicited auto-sense. */
-		if (result == USB_STOR_TRANSPORT_GOOD &&
-			/* Filemark 0, ignore EOM, ILI 0, no sense */
+		/* We often get empty sense data.  This could indicate that
+		 * everything worked or that there was an unspecified
+		 * problem.  We have to decide which.
+		 */
+		if (	/* Filemark 0, ignore EOM, ILI 0, no sense */
 				(srb->sense_buffer[2] & 0xaf) == 0 &&
 			/* No ASC or ASCQ */
 				srb->sense_buffer[12] == 0 &&
 				srb->sense_buffer[13] == 0) {
-			srb->result = SAM_STAT_GOOD;
-			srb->sense_buffer[0] = 0x0;
+
+			/* If things are really okay, then let's show that.
+			 * Zero out the sense buffer so the higher layers
+			 * won't realize we did an unsolicited auto-sense.
+			 */
+			if (result == USB_STOR_TRANSPORT_GOOD) {
+				srb->result = SAM_STAT_GOOD;
+				srb->sense_buffer[0] = 0x0;
+
+			/* If there was a problem, report an unspecified
+			 * hardware error to prevent the higher layers from
+			 * entering an infinite retry loop.
+			 */
+			} else {
+				srb->result = DID_ERROR << 16;
+				srb->sense_buffer[2] = HARDWARE_ERROR;
+			}
 		}
 	}
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 079ae0f7bec..d4f034ebaa8 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1823,6 +1823,13 @@ UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Sergey Pinaev <dfo@antex.ru> */
+UNUSUAL_DEV(  0x4102, 0x1059, 0x0000,  0x0000,
+               "iRiver",
+               "P7K",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_MAX_SECTORS_64 ),
+
 /*
  * David Härdeman <david@2gen.com>
  * The key makes the SCSI stack print confusing (but harmless) messages