Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David S Miller:

 1) Remove the ipv4 routing cache.  Now lookups go directly into the FIB
    trie and use prebuilt routes cached there.

    No more garbage collection, no more rDOS attacks on the routing
    cache.  Instead we now get predictable and consistent performance,
    no matter what the pattern of traffic we service.

    This has been almost 2 years in the making.  Special thanks to
    Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
    have helped along the way.

    I'm sure that with a change of this magnitude there will be some
    kind of fallout, but such things ought the be simple to fix at this
    point.  Luckily I'm not European so I'll be around all of August to
    fix things :-)

    The major stages of this work here are each fronted by a forced
    merge commit whose commit message contains a top-level description
    of the motivations and implementation issues.

 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
    input.

 3) TCP SYN/ACK performance tweaks from Eric Dumazet.

 4) Add namespace support for netfilter L4 conntrack helpers, from Gao
    Feng.

 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
    Yuval Mintz.

 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

 7) Support for connection tracker helpers in userspace, from Pablo
    Neira Ayuso.

 8) Allow userspace driven TX load balancing functions in TEAM driver,
    from Jiri Pirko.

 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
    embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
    up in the packet scheduler layer.  Whereas the existing BQL (Byte
    Queue Limits) limits the pkt_sched --> netdevice queuing levels,
    this controls the TCP --> pkt_sched queueing levels.

    From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
    from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
    Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
    send data in the SYN exchange, from Yuchung Cheng.

    Basically, the sender queues up data with a sendmsg() call using
    MSG_FASTOPEN, then they do the connect() which emits the queued up
    fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
    hit a locked socket.  The TCP Small Queues changes added a
    tcp_release_cb() that allows us to queue work up to the
    release_sock() caller, and that's what we use here too.  From Eric
    Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
  genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
  r8169: revert "add byte queue limit support".
  ipv4: Change rt->rt_iif encoding.
  net: Make skb->skb_iif always track skb->dev
  ipv4: Prepare for change of rt->rt_iif encoding.
  ipv4: Remove all RTCF_DIRECTSRC handliing.
  ipv4: Really ignore ICMP address requests/replies.
  decnet: Don't set RTCF_DIRECTSRC.
  net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
  ipv4: Remove redundant assignment
  rds: set correct msg_namelen
  openvswitch: potential NULL deref in sample()
  tcp: dont drop MTU reduction indications
  bnx2x: Add new 57840 device IDs
  tcp: avoid oops in tcp_metrics and reset tcpm_stamp
  niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
  niu: Fix to check for dma mapping errors.
  net: Fix references to out-of-scope variables in put_cmsg_compat()
  net: ethernet: davinci_emac: add pm_runtime support
  net: ethernet: davinci_emac: Remove unnecessary #include
  ...

1 files changed, 2171 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
new file mode 100644
index 00000000000..84d3db5aa50
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -0,0 +1,2171 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#include "iwl-eeprom-read.h"
+#include "iwl-eeprom-parse.h"
+#include "iwl-io.h"
+#include "iwl-trans.h"
+#include "iwl-op-mode.h"
+#include "iwl-drv.h"
+#include "iwl-modparams.h"
+#include "iwl-prph.h"
+
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
+
+
+/******************************************************************************
+ *
+ * module boiler plate
+ *
+ ******************************************************************************/
+
+/*
+ * module name, copyright, version, etc.
+ */
+#define DRV_DESCRIPTION	"Intel(R) Wireless WiFi Link AGN driver for Linux"
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+#define VD "d"
+#else
+#define VD
+#endif
+
+#define DRV_VERSION     IWLWIFI_VERSION VD
+
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static const struct iwl_op_mode_ops iwl_dvm_ops;
+
+void iwl_update_chain_flags(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+
+	for_each_context(priv, ctx) {
+		iwlagn_set_rxon_chain(priv, ctx);
+		if (ctx->active.rx_chain != ctx->staging.rx_chain)
+			iwlagn_commit_rxon(priv, ctx);
+	}
+}
+
+/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
+static void iwl_set_beacon_tim(struct iwl_priv *priv,
+			       struct iwl_tx_beacon_cmd *tx_beacon_cmd,
+			       u8 *beacon, u32 frame_size)
+{
+	u16 tim_idx;
+	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
+
+	/*
+	 * The index is relative to frame start but we start looking at the
+	 * variable-length part of the beacon.
+	 */
+	tim_idx = mgmt->u.beacon.variable - beacon;
+
+	/* Parse variable-length elements of beacon to find WLAN_EID_TIM */
+	while ((tim_idx < (frame_size - 2)) &&
+			(beacon[tim_idx] != WLAN_EID_TIM))
+		tim_idx += beacon[tim_idx+1] + 2;
+
+	/* If TIM field was found, set variables */
+	if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
+		tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
+		tx_beacon_cmd->tim_size = beacon[tim_idx+1];
+	} else
+		IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
+}
+
+int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
+{
+	struct iwl_tx_beacon_cmd *tx_beacon_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_TX_BEACON,
+		.flags = CMD_SYNC,
+	};
+	struct ieee80211_tx_info *info;
+	u32 frame_size;
+	u32 rate_flags;
+	u32 rate;
+
+	/*
+	 * We have to set up the TX command, the TX Beacon command, and the
+	 * beacon contents.
+	 */
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!priv->beacon_ctx) {
+		IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
+		return 0;
+	}
+
+	if (WARN_ON(!priv->beacon_skb))
+		return -EINVAL;
+
+	/* Allocate beacon command */
+	if (!priv->beacon_cmd)
+		priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL);
+	tx_beacon_cmd = priv->beacon_cmd;
+	if (!tx_beacon_cmd)
+		return -ENOMEM;
+
+	frame_size = priv->beacon_skb->len;
+
+	/* Set up TX command fields */
+	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
+	tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
+	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+	tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
+		TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
+
+	/* Set up TX beacon command fields */
+	iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data,
+			   frame_size);
+
+	/* Set up packet rate and flags */
+	info = IEEE80211_SKB_CB(priv->beacon_skb);
+
+	/*
+	 * Let's set up the rate at least somewhat correctly;
+	 * it will currently not actually be used by the uCode,
+	 * it uses the broadcast station's rate instead.
+	 */
+	if (info->control.rates[0].idx < 0 ||
+	    info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
+		rate = 0;
+	else
+		rate = info->control.rates[0].idx;
+
+	priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
+					      priv->eeprom_data->valid_tx_ant);
+	rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
+
+	/* In mac80211, rates for 5 GHz start at 0 */
+	if (info->band == IEEE80211_BAND_5GHZ)
+		rate += IWL_FIRST_OFDM_RATE;
+	else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE)
+		rate_flags |= RATE_MCS_CCK_MSK;
+
+	tx_beacon_cmd->tx.rate_n_flags =
+			iwl_hw_set_rate_n_flags(rate, rate_flags);
+
+	/* Submit command */
+	cmd.len[0] = sizeof(*tx_beacon_cmd);
+	cmd.data[0] = tx_beacon_cmd;
+	cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
+	cmd.len[1] = frame_size;
+	cmd.data[1] = priv->beacon_skb->data;
+	cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY;
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+static void iwl_bg_beacon_update(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, beacon_update);
+	struct sk_buff *beacon;
+
+	mutex_lock(&priv->mutex);
+	if (!priv->beacon_ctx) {
+		IWL_ERR(priv, "updating beacon w/o beacon context!\n");
+		goto out;
+	}
+
+	if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
+		/*
+		 * The ucode will send beacon notifications even in
+		 * IBSS mode, but we don't want to process them. But
+		 * we need to defer the type check to here due to
+		 * requiring locking around the beacon_ctx access.
+		 */
+		goto out;
+	}
+
+	/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
+	beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
+	if (!beacon) {
+		IWL_ERR(priv, "update beacon failed -- keeping old\n");
+		goto out;
+	}
+
+	/* new beacon skb is allocated every time; dispose previous.*/
+	dev_kfree_skb(priv->beacon_skb);
+
+	priv->beacon_skb = beacon;
+
+	iwlagn_send_beacon_cmd(priv);
+ out:
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_bt_runtime_config(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, bt_runtime_config);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* dont send host command if rf-kill is on */
+	if (!iwl_is_ready_rf(priv))
+		return;
+	iwlagn_send_advance_bt_config(priv);
+}
+
+static void iwl_bg_bt_full_concurrency(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, bt_full_concurrency);
+	struct iwl_rxon_context *ctx;
+
+	mutex_lock(&priv->mutex);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		goto out;
+
+	/* dont send host command if rf-kill is on */
+	if (!iwl_is_ready_rf(priv))
+		goto out;
+
+	IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
+		       priv->bt_full_concurrent ?
+		       "full concurrency" : "3-wire");
+
+	/*
+	 * LQ & RXON updated cmds must be sent before BT Config cmd
+	 * to avoid 3-wire collisions
+	 */
+	for_each_context(priv, ctx) {
+		iwlagn_set_rxon_chain(priv, ctx);
+		iwlagn_commit_rxon(priv, ctx);
+	}
+
+	iwlagn_send_advance_bt_config(priv);
+out:
+	mutex_unlock(&priv->mutex);
+}
+
+int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
+{
+	struct iwl_statistics_cmd statistics_cmd = {
+		.configuration_flags =
+			clear ? IWL_STATS_CONF_CLEAR_STATS : 0,
+	};
+
+	if (flags & CMD_ASYNC)
+		return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD,
+					CMD_ASYNC,
+					sizeof(struct iwl_statistics_cmd),
+					&statistics_cmd);
+	else
+		return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD,
+					CMD_SYNC,
+					sizeof(struct iwl_statistics_cmd),
+					&statistics_cmd);
+}
+
+/**
+ * iwl_bg_statistics_periodic - Timer callback to queue statistics
+ *
+ * This callback is provided in order to send a statistics request.
+ *
+ * This timer function is continually reset to execute within
+ * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
+ * was received.  We need to ensure we receive the statistics in order
+ * to update the temperature used for calibrating the TXPOWER.
+ */
+static void iwl_bg_statistics_periodic(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* dont send host command if rf-kill is on */
+	if (!iwl_is_ready_rf(priv))
+		return;
+
+	iwl_send_statistics_request(priv, CMD_ASYNC, false);
+}
+
+
+static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
+					u32 start_idx, u32 num_events,
+					u32 capacity, u32 mode)
+{
+	u32 i;
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
+
+	if (mode == 0)
+		ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
+	else
+		ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
+
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&priv->trans->reg_lock, reg_flags);
+	if (unlikely(!iwl_grab_nic_access(priv->trans))) {
+		spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags);
+		return;
+	}
+
+	/* Set starting address; reads will auto-increment */
+	iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, ptr);
+
+	/*
+	 * Refuse to read more than would have fit into the log from
+	 * the current start_idx. This used to happen due to the race
+	 * described below, but now WARN because the code below should
+	 * prevent it from happening here.
+	 */
+	if (WARN_ON(num_events > capacity - start_idx))
+		num_events = capacity - start_idx;
+
+	/*
+	 * "time" is actually "data" for mode 0 (no timestamp).
+	 * place event id # at far right for easier visual parsing.
+	 */
+	for (i = 0; i < num_events; i++) {
+		ev = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+		time = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+		if (mode == 0) {
+			trace_iwlwifi_dev_ucode_cont_event(
+					priv->trans->dev, 0, time, ev);
+		} else {
+			data = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+			trace_iwlwifi_dev_ucode_cont_event(
+					priv->trans->dev, time, data, ev);
+		}
+	}
+	/* Allow device to power down */
+	iwl_release_nic_access(priv->trans);
+	spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags);
+}
+
+static void iwl_continuous_event_trace(struct iwl_priv *priv)
+{
+	u32 capacity;   /* event log capacity in # entries */
+	struct {
+		u32 capacity;
+		u32 mode;
+		u32 wrap_counter;
+		u32 write_counter;
+	} __packed read;
+	u32 base;       /* SRAM byte address of event log header */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+
+	base = priv->device_pointers.log_event_table;
+	if (iwlagn_hw_valid_rtc_data_addr(base)) {
+		iwl_read_targ_mem_bytes(priv->trans, base, &read, sizeof(read));
+		capacity = read.capacity;
+		mode = read.mode;
+		num_wraps = read.wrap_counter;
+		next_entry = read.write_counter;
+	} else
+		return;
+
+	/*
+	 * Unfortunately, the uCode doesn't use temporary variables.
+	 * Therefore, it can happen that we read next_entry == capacity,
+	 * which really means next_entry == 0.
+	 */
+	if (unlikely(next_entry == capacity))
+		next_entry = 0;
+	/*
+	 * Additionally, the uCode increases the write pointer before
+	 * the wraps counter, so if the write pointer is smaller than
+	 * the old write pointer (wrap occurred) but we read that no
+	 * wrap occurred, we actually read between the next_entry and
+	 * num_wraps update (this does happen in practice!!) -- take
+	 * that into account by increasing num_wraps.
+	 */
+	if (unlikely(next_entry < priv->event_log.next_entry &&
+		     num_wraps == priv->event_log.num_wraps))
+		num_wraps++;
+
+	if (num_wraps == priv->event_log.num_wraps) {
+		iwl_print_cont_event_trace(
+			priv, base, priv->event_log.next_entry,
+			next_entry - priv->event_log.next_entry,
+			capacity, mode);
+
+		priv->event_log.non_wraps_count++;
+	} else {
+		if (num_wraps - priv->event_log.num_wraps > 1)
+			priv->event_log.wraps_more_count++;
+		else
+			priv->event_log.wraps_once_count++;
+
+		trace_iwlwifi_dev_ucode_wrap_event(priv->trans->dev,
+				num_wraps - priv->event_log.num_wraps,
+				next_entry, priv->event_log.next_entry);
+
+		if (next_entry < priv->event_log.next_entry) {
+			iwl_print_cont_event_trace(
+				priv, base, priv->event_log.next_entry,
+				capacity - priv->event_log.next_entry,
+				capacity, mode);
+
+			iwl_print_cont_event_trace(
+				priv, base, 0, next_entry, capacity, mode);
+		} else {
+			iwl_print_cont_event_trace(
+				priv, base, next_entry,
+				capacity - next_entry,
+				capacity, mode);
+
+			iwl_print_cont_event_trace(
+				priv, base, 0, next_entry, capacity, mode);
+		}
+	}
+
+	priv->event_log.num_wraps = num_wraps;
+	priv->event_log.next_entry = next_entry;
+}
+
+/**
+ * iwl_bg_ucode_trace - Timer callback to log ucode event
+ *
+ * The timer is continually set to execute every
+ * UCODE_TRACE_PERIOD milliseconds after the last timer expired
+ * this function is to perform continuous uCode event logging operation
+ * if enabled
+ */
+static void iwl_bg_ucode_trace(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (priv->event_log.ucode_trace) {
+		iwl_continuous_event_trace(priv);
+		/* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
+		mod_timer(&priv->ucode_trace,
+			 jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
+	}
+}
+
+static void iwl_bg_tx_flush(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, tx_flush);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* do nothing if rf-kill is on */
+	if (!iwl_is_ready_rf(priv))
+		return;
+
+	IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
+	iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
+}
+
+/*
+ * queue/FIFO/AC mapping definitions
+ */
+
+static const u8 iwlagn_bss_ac_to_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+};
+
+static const u8 iwlagn_bss_ac_to_queue[] = {
+	0, 1, 2, 3,
+};
+
+static const u8 iwlagn_pan_ac_to_fifo[] = {
+	IWL_TX_FIFO_VO_IPAN,
+	IWL_TX_FIFO_VI_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_BK_IPAN,
+};
+
+static const u8 iwlagn_pan_ac_to_queue[] = {
+	7, 6, 5, 4,
+};
+
+static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags)
+{
+	int i;
+
+	/*
+	 * The default context is always valid,
+	 * the PAN context depends on uCode.
+	 */
+	priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
+	if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN)
+		priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
+
+	for (i = 0; i < NUM_IWL_RXON_CTX; i++)
+		priv->contexts[i].ctxid = i;
+
+	priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
+	priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
+	priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
+	priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
+	priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
+	priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
+	priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
+		BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MONITOR);
+	priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
+		BIT(NL80211_IFTYPE_STATION);
+	priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
+	priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
+	priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
+	priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
+	memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue,
+	       iwlagn_bss_ac_to_queue, sizeof(iwlagn_bss_ac_to_queue));
+	memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo,
+	       iwlagn_bss_ac_to_fifo, sizeof(iwlagn_bss_ac_to_fifo));
+
+	priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
+	priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd =
+		REPLY_WIPAN_RXON_TIMING;
+	priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd =
+		REPLY_WIPAN_RXON_ASSOC;
+	priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
+	priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
+	priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
+	priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
+	priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
+	priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
+		BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
+
+	if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P)
+		priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
+			BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			BIT(NL80211_IFTYPE_P2P_GO);
+
+	priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
+	priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
+	priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
+	memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue,
+	       iwlagn_pan_ac_to_queue, sizeof(iwlagn_pan_ac_to_queue));
+	memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo,
+	       iwlagn_pan_ac_to_fifo, sizeof(iwlagn_pan_ac_to_fifo));
+	priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE;
+
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+}
+
+static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
+{
+	struct iwl_ct_kill_config cmd;
+	struct iwl_ct_kill_throttling_config adv_cmd;
+	int ret = 0;
+
+	iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR,
+		    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+
+	priv->thermal_throttle.ct_kill_toggle = false;
+
+	if (priv->cfg->base_params->support_ct_kill_exit) {
+		adv_cmd.critical_temperature_enter =
+			cpu_to_le32(priv->hw_params.ct_kill_threshold);
+		adv_cmd.critical_temperature_exit =
+			cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
+
+		ret = iwl_dvm_send_cmd_pdu(priv,
+				       REPLY_CT_KILL_CONFIG_CMD,
+				       CMD_SYNC, sizeof(adv_cmd), &adv_cmd);
+		if (ret)
+			IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
+		else
+			IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
+				"succeeded, critical temperature enter is %d,"
+				"exit is %d\n",
+				priv->hw_params.ct_kill_threshold,
+				priv->hw_params.ct_kill_exit_threshold);
+	} else {
+		cmd.critical_temperature_R =
+			cpu_to_le32(priv->hw_params.ct_kill_threshold);
+
+		ret = iwl_dvm_send_cmd_pdu(priv,
+				       REPLY_CT_KILL_CONFIG_CMD,
+				       CMD_SYNC, sizeof(cmd), &cmd);
+		if (ret)
+			IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
+		else
+			IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
+				"succeeded, "
+				"critical temperature is %d\n",
+				priv->hw_params.ct_kill_threshold);
+	}
+}
+
+static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
+{
+	struct iwl_calib_cfg_cmd calib_cfg_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = CALIBRATION_CFG_CMD,
+		.len = { sizeof(struct iwl_calib_cfg_cmd), },
+		.data = { &calib_cfg_cmd, },
+	};
+
+	memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
+	calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+
+static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
+{
+	struct iwl_tx_ant_config_cmd tx_ant_cmd = {
+	  .valid = cpu_to_le32(valid_tx_ant),
+	};
+
+	if (IWL_UCODE_API(priv->fw->ucode_ver) > 1) {
+		IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
+		return iwl_dvm_send_cmd_pdu(priv,
+					TX_ANT_CONFIGURATION_CMD,
+					CMD_SYNC,
+					sizeof(struct iwl_tx_ant_config_cmd),
+					&tx_ant_cmd);
+	} else {
+		IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
+		return -EOPNOTSUPP;
+	}
+}
+
+static void iwl_send_bt_config(struct iwl_priv *priv)
+{
+	struct iwl_bt_cmd bt_cmd = {
+		.lead_time = BT_LEAD_TIME_DEF,
+		.max_kill = BT_MAX_KILL_DEF,
+		.kill_ack_mask = 0,
+		.kill_cts_mask = 0,
+	};
+
+	if (!iwlwifi_mod_params.bt_coex_active)
+		bt_cmd.flags = BT_COEX_DISABLE;
+	else
+		bt_cmd.flags = BT_COEX_ENABLE;
+
+	priv->bt_enable_flag = bt_cmd.flags;
+	IWL_DEBUG_INFO(priv, "BT coex %s\n",
+		(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
+
+	if (iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+			     CMD_SYNC, sizeof(struct iwl_bt_cmd), &bt_cmd))
+		IWL_ERR(priv, "failed to send BT Coex Config\n");
+}
+
+/**
+ * iwl_alive_start - called after REPLY_ALIVE notification received
+ *                   from protocol/runtime uCode (initialization uCode's
+ *                   Alive gets handled by iwl_init_alive_start()).
+ */
+int iwl_alive_start(struct iwl_priv *priv)
+{
+	int ret = 0;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
+
+	/* After the ALIVE response, we can send host commands to the uCode */
+	set_bit(STATUS_ALIVE, &priv->status);
+
+	if (iwl_is_rfkill(priv))
+		return -ERFKILL;
+
+	if (priv->event_log.ucode_trace) {
+		/* start collecting data now */
+		mod_timer(&priv->ucode_trace, jiffies);
+	}
+
+	/* download priority table before any calibration request */
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/* Configure Bluetooth device coexistence support */
+		if (priv->cfg->bt_params->bt_sco_disable)
+			priv->bt_enable_pspoll = false;
+		else
+			priv->bt_enable_pspoll = true;
+
+		priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
+		priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
+		priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
+		iwlagn_send_advance_bt_config(priv);
+		priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
+		priv->cur_rssi_ctx = NULL;
+
+		iwl_send_prio_tbl(priv);
+
+		/* FIXME: w/a to force change uCode BT state machine */
+		ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+					 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		if (ret)
+			return ret;
+		ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
+					 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		if (ret)
+			return ret;
+	} else {
+		/*
+		 * default is 2-wire BT coexexistence support
+		 */
+		iwl_send_bt_config(priv);
+	}
+
+	/*
+	 * Perform runtime calibrations, including DC calibration.
+	 */
+	iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX);
+
+	ieee80211_wake_queues(priv->hw);
+
+	/* Configure Tx antenna selection based on H/W config */
+	iwlagn_send_tx_ant_config(priv, priv->eeprom_data->valid_tx_ant);
+
+	if (iwl_is_associated_ctx(ctx) && !priv->wowlan) {
+		struct iwl_rxon_cmd *active_rxon =
+				(struct iwl_rxon_cmd *)&ctx->active;
+		/* apply any changes in staging */
+		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	} else {
+		struct iwl_rxon_context *tmp;
+		/* Initialize our rx_config data */
+		for_each_context(priv, tmp)
+			iwl_connection_init_rx_config(priv, tmp);
+
+		iwlagn_set_rxon_chain(priv, ctx);
+	}
+
+	if (!priv->wowlan) {
+		/* WoWLAN ucode will not reply in the same way, skip it */
+		iwl_reset_run_time_calib(priv);
+	}
+
+	set_bit(STATUS_READY, &priv->status);
+
+	/* Configure the adapter for unassociated operation */
+	ret = iwlagn_commit_rxon(priv, ctx);
+	if (ret)
+		return ret;
+
+	/* At this point, the NIC is initialized and operational */
+	iwl_rf_kill_ct_config(priv);
+
+	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
+
+	return iwl_power_update_mode(priv, true);
+}
+
+/**
+ * iwl_clear_driver_stations - clear knowledge of all stations from driver
+ * @priv: iwl priv struct
+ *
+ * This is called during iwl_down() to make sure that in the case
+ * we're coming there from a hardware restart mac80211 will be
+ * able to reconfigure stations -- if we're getting there in the
+ * normal down flow then the stations will already be cleared.
+ */
+static void iwl_clear_driver_stations(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+
+	spin_lock_bh(&priv->sta_lock);
+	memset(priv->stations, 0, sizeof(priv->stations));
+	priv->num_stations = 0;
+
+	priv->ucode_key_table = 0;
+
+	for_each_context(priv, ctx) {
+		/*
+		 * Remove all key information that is not stored as part
+		 * of station information since mac80211 may not have had
+		 * a chance to remove all the keys. When device is
+		 * reconfigured by mac80211 after an error all keys will
+		 * be reconfigured.
+		 */
+		memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys));
+		ctx->key_mapping_keys = 0;
+	}
+
+	spin_unlock_bh(&priv->sta_lock);
+}
+
+void iwl_down(struct iwl_priv *priv)
+{
+	int exit_pending;
+
+	IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
+
+	lockdep_assert_held(&priv->mutex);
+
+	iwl_scan_cancel_timeout(priv, 200);
+
+	/*
+	 * If active, scanning won't cancel it, so say it expired.
+	 * No race since we hold the mutex here and a new one
+	 * can't come in at this time.
+	 */
+	ieee80211_remain_on_channel_expired(priv->hw);
+
+	exit_pending =
+		test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	iwl_clear_ucode_stations(priv, NULL);
+	iwl_dealloc_bcast_stations(priv);
+	iwl_clear_driver_stations(priv);
+
+	/* reset BT coex data */
+	priv->bt_status = 0;
+	priv->cur_rssi_ctx = NULL;
+	priv->bt_is_sco = 0;
+	if (priv->cfg->bt_params)
+		priv->bt_traffic_load =
+			 priv->cfg->bt_params->bt_init_traffic_load;
+	else
+		priv->bt_traffic_load = 0;
+	priv->bt_full_concurrent = false;
+	priv->bt_ci_compliance = 0;
+
+	/* Wipe out the EXIT_PENDING status bit if we are not actually
+	 * exiting the module */
+	if (!exit_pending)
+		clear_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	if (priv->mac80211_registered)
+		ieee80211_stop_queues(priv->hw);
+
+	priv->ucode_loaded = false;
+	iwl_trans_stop_device(priv->trans);
+
+	/* Set num_aux_in_flight must be done after the transport is stopped */
+	atomic_set(&priv->num_aux_in_flight, 0);
+
+	/* Clear out all status bits but a few that are stable across reset */
+	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
+				STATUS_RF_KILL_HW |
+			test_bit(STATUS_FW_ERROR, &priv->status) <<
+				STATUS_FW_ERROR |
+			test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+				STATUS_EXIT_PENDING;
+
+	dev_kfree_skb(priv->beacon_skb);
+	priv->beacon_skb = NULL;
+}
+
+/*****************************************************************************
+ *
+ * Workqueue callbacks
+ *
+ *****************************************************************************/
+
+static void iwl_bg_run_time_calib_work(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv,
+			run_time_calib_work);
+
+	mutex_lock(&priv->mutex);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
+	    test_bit(STATUS_SCANNING, &priv->status)) {
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	if (priv->start_calib) {
+		iwl_chain_noise_calibration(priv);
+		iwl_sensitivity_calibration(priv);
+	}
+
+	mutex_unlock(&priv->mutex);
+}
+
+void iwlagn_prepare_restart(struct iwl_priv *priv)
+{
+	bool bt_full_concurrent;
+	u8 bt_ci_compliance;
+	u8 bt_load;
+	u8 bt_status;
+	bool bt_is_sco;
+	int i;
+
+	lockdep_assert_held(&priv->mutex);
+
+	priv->is_open = 0;
+
+	/*
+	 * __iwl_down() will clear the BT status variables,
+	 * which is correct, but when we restart we really
+	 * want to keep them so restore them afterwards.
+	 *
+	 * The restart process will later pick them up and
+	 * re-configure the hw when we reconfigure the BT
+	 * command.
+	 */
+	bt_full_concurrent = priv->bt_full_concurrent;
+	bt_ci_compliance = priv->bt_ci_compliance;
+	bt_load = priv->bt_traffic_load;
+	bt_status = priv->bt_status;
+	bt_is_sco = priv->bt_is_sco;
+
+	iwl_down(priv);
+
+	priv->bt_full_concurrent = bt_full_concurrent;
+	priv->bt_ci_compliance = bt_ci_compliance;
+	priv->bt_traffic_load = bt_load;
+	priv->bt_status = bt_status;
+	priv->bt_is_sco = bt_is_sco;
+
+	/* reset aggregation queues */
+	for (i = IWLAGN_FIRST_AMPDU_QUEUE; i < IWL_MAX_HW_QUEUES; i++)
+		priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE;
+	/* and stop counts */
+	for (i = 0; i < IWL_MAX_HW_QUEUES; i++)
+		atomic_set(&priv->queue_stop_count[i], 0);
+
+	memset(priv->agg_q_alloc, 0, sizeof(priv->agg_q_alloc));
+}
+
+static void iwl_bg_restart(struct work_struct *data)
+{
+	struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
+		mutex_lock(&priv->mutex);
+		iwlagn_prepare_restart(priv);
+		mutex_unlock(&priv->mutex);
+		iwl_cancel_deferred_work(priv);
+		ieee80211_restart_hw(priv->hw);
+	} else {
+		WARN_ON(1);
+	}
+}
+
+
+
+
+void iwlagn_disable_roc(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!priv->hw_roc_setup)
+		return;
+
+	ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+	priv->hw_roc_channel = NULL;
+
+	memset(ctx->staging.node_addr, 0, ETH_ALEN);
+
+	iwlagn_commit_rxon(priv, ctx);
+
+	ctx->is_active = false;
+	priv->hw_roc_setup = false;
+}
+
+static void iwlagn_disable_roc_work(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv,
+					     hw_roc_disable_work.work);
+
+	mutex_lock(&priv->mutex);
+	iwlagn_disable_roc(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+/*****************************************************************************
+ *
+ * driver setup and teardown
+ *
+ *****************************************************************************/
+
+static void iwl_setup_deferred_work(struct iwl_priv *priv)
+{
+	priv->workqueue = create_singlethread_workqueue(DRV_NAME);
+
+	INIT_WORK(&priv->restart, iwl_bg_restart);
+	INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
+	INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
+	INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
+	INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
+	INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
+	INIT_DELAYED_WORK(&priv->hw_roc_disable_work,
+			  iwlagn_disable_roc_work);
+
+	iwl_setup_scan_deferred_work(priv);
+
+	if (priv->cfg->bt_params)
+		iwlagn_bt_setup_deferred_work(priv);
+
+	init_timer(&priv->statistics_periodic);
+	priv->statistics_periodic.data = (unsigned long)priv;
+	priv->statistics_periodic.function = iwl_bg_statistics_periodic;
+
+	init_timer(&priv->ucode_trace);
+	priv->ucode_trace.data = (unsigned long)priv;
+	priv->ucode_trace.function = iwl_bg_ucode_trace;
+}
+
+void iwl_cancel_deferred_work(struct iwl_priv *priv)
+{
+	if (priv->cfg->bt_params)
+		iwlagn_bt_cancel_deferred_work(priv);
+
+	cancel_work_sync(&priv->run_time_calib_work);
+	cancel_work_sync(&priv->beacon_update);
+
+	iwl_cancel_scan_deferred_work(priv);
+
+	cancel_work_sync(&priv->bt_full_concurrency);
+	cancel_work_sync(&priv->bt_runtime_config);
+	cancel_delayed_work_sync(&priv->hw_roc_disable_work);
+
+	del_timer_sync(&priv->statistics_periodic);
+	del_timer_sync(&priv->ucode_trace);
+}
+
+static int iwl_init_drv(struct iwl_priv *priv)
+{
+	spin_lock_init(&priv->sta_lock);
+
+	mutex_init(&priv->mutex);
+
+	INIT_LIST_HEAD(&priv->calib_results);
+
+	priv->band = IEEE80211_BAND_2GHZ;
+
+	priv->plcp_delta_threshold =
+		priv->cfg->base_params->plcp_delta_threshold;
+
+	priv->iw_mode = NL80211_IFTYPE_STATION;
+	priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
+	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
+	priv->agg_tids_count = 0;
+
+	priv->ucode_owner = IWL_OWNERSHIP_DRIVER;
+
+	priv->rx_statistics_jiffies = jiffies;
+
+	/* Choose which receivers/antennas to use */
+	iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
+
+	iwl_init_scan_params(priv);
+
+	/* init bt coex */
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
+		priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
+		priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
+		priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
+		priv->bt_duration = BT_DURATION_LIMIT_DEF;
+		priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
+	}
+
+	return 0;
+}
+
+static void iwl_uninit_drv(struct iwl_priv *priv)
+{
+	kfree(priv->scan_cmd);
+	kfree(priv->beacon_cmd);
+	kfree(rcu_dereference_raw(priv->noa_data));
+	iwl_calib_free_results(priv);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	kfree(priv->wowlan_sram);
+#endif
+}
+
+static void iwl_set_hw_params(struct iwl_priv *priv)
+{
+	if (priv->cfg->ht_params)
+		priv->hw_params.use_rts_for_aggregation =
+			priv->cfg->ht_params->use_rts_for_aggregation;
+
+	/* Device-specific setup */
+	priv->lib->set_hw_params(priv);
+}
+
+
+
+/* show what optional capabilities we have */
+static void iwl_option_config(struct iwl_priv *priv)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG disabled\n");
+#endif
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS disabled\n");
+#endif
+
+#ifdef CONFIG_IWLWIFI_DEVICE_TRACING
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING disabled\n");
+#endif
+
+#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE disabled\n");
+#endif
+
+#ifdef CONFIG_IWLWIFI_P2P
+	IWL_INFO(priv, "CONFIG_IWLWIFI_P2P enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_P2P disabled\n");
+#endif
+}
+
+static int iwl_eeprom_init_hw_params(struct iwl_priv *priv)
+{
+	u16 radio_cfg;
+
+	priv->eeprom_data->sku = priv->eeprom_data->sku;
+
+	if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE &&
+	    !priv->cfg->ht_params) {
+		IWL_ERR(priv, "Invalid 11n configuration\n");
+		return -EINVAL;
+	}
+
+	if (!priv->eeprom_data->sku) {
+		IWL_ERR(priv, "Invalid device sku\n");
+		return -EINVAL;
+	}
+
+	IWL_INFO(priv, "Device SKU: 0x%X\n", priv->eeprom_data->sku);
+
+	radio_cfg = priv->eeprom_data->radio_cfg;
+
+	priv->hw_params.tx_chains_num =
+		num_of_ant(priv->eeprom_data->valid_tx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->eeprom_data->valid_rx_ant);
+
+	IWL_INFO(priv, "Valid Tx ant: 0x%X, Valid Rx ant: 0x%X\n",
+		 priv->eeprom_data->valid_tx_ant,
+		 priv->eeprom_data->valid_rx_ant);
+
+	return 0;
+}
+
+static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
+						 const struct iwl_cfg *cfg,
+						 const struct iwl_fw *fw)
+{
+	struct iwl_priv *priv;
+	struct ieee80211_hw *hw;
+	struct iwl_op_mode *op_mode;
+	u16 num_mac;
+	u32 ucode_flags;
+	struct iwl_trans_config trans_cfg;
+	static const u8 no_reclaim_cmds[] = {
+		REPLY_RX_PHY_CMD,
+		REPLY_RX_MPDU_CMD,
+		REPLY_COMPRESSED_BA,
+		STATISTICS_NOTIFICATION,
+		REPLY_TX,
+	};
+	int i;
+
+	/************************
+	 * 1. Allocating HW data
+	 ************************/
+	hw = iwl_alloc_all();
+	if (!hw) {
+		pr_err("%s: Cannot allocate network device\n", cfg->name);
+		goto out;
+	}
+
+	op_mode = hw->priv;
+	op_mode->ops = &iwl_dvm_ops;
+	priv = IWL_OP_MODE_GET_DVM(op_mode);
+	priv->trans = trans;
+	priv->dev = trans->dev;
+	priv->cfg = cfg;
+	priv->fw = fw;
+
+	switch (priv->cfg->device_family) {
+	case IWL_DEVICE_FAMILY_1000:
+	case IWL_DEVICE_FAMILY_100:
+		priv->lib = &iwl1000_lib;
+		break;
+	case IWL_DEVICE_FAMILY_2000:
+	case IWL_DEVICE_FAMILY_105:
+		priv->lib = &iwl2000_lib;
+		break;
+	case IWL_DEVICE_FAMILY_2030:
+	case IWL_DEVICE_FAMILY_135:
+		priv->lib = &iwl2030_lib;
+		break;
+	case IWL_DEVICE_FAMILY_5000:
+		priv->lib = &iwl5000_lib;
+		break;
+	case IWL_DEVICE_FAMILY_5150:
+		priv->lib = &iwl5150_lib;
+		break;
+	case IWL_DEVICE_FAMILY_6000:
+	case IWL_DEVICE_FAMILY_6005:
+	case IWL_DEVICE_FAMILY_6000i:
+	case IWL_DEVICE_FAMILY_6050:
+	case IWL_DEVICE_FAMILY_6150:
+		priv->lib = &iwl6000_lib;
+		break;
+	case IWL_DEVICE_FAMILY_6030:
+		priv->lib = &iwl6030_lib;
+		break;
+	default:
+		break;
+	}
+
+	if (WARN_ON(!priv->lib))
+		goto out_free_hw;
+
+	/*
+	 * Populate the state variables that the transport layer needs
+	 * to know about.
+	 */
+	trans_cfg.op_mode = op_mode;
+	trans_cfg.no_reclaim_cmds = no_reclaim_cmds;
+	trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds);
+	trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K;
+	if (!iwlwifi_mod_params.wd_disable)
+		trans_cfg.queue_watchdog_timeout =
+			priv->cfg->base_params->wd_timeout;
+	else
+		trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
+	trans_cfg.command_names = iwl_dvm_cmd_strings;
+	trans_cfg.cmd_fifo = IWLAGN_CMD_FIFO_NUM;
+
+	WARN_ON(sizeof(priv->transport_queue_stop) * BITS_PER_BYTE <
+		priv->cfg->base_params->num_of_queues);
+
+	ucode_flags = fw->ucode_capa.flags;
+
+#ifndef CONFIG_IWLWIFI_P2P
+	ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
+#endif
+
+	if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) {
+		priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
+		trans_cfg.cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
+	} else {
+		priv->sta_key_max_num = STA_KEY_MAX_NUM;
+		trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
+	}
+
+	/* Configure transport layer */
+	iwl_trans_configure(priv->trans, &trans_cfg);
+
+	/* At this point both hw and priv are allocated. */
+
+	SET_IEEE80211_DEV(priv->hw, priv->trans->dev);
+
+	iwl_option_config(priv);
+
+	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
+
+	/* is antenna coupling more than 35dB ? */
+	priv->bt_ant_couple_ok =
+		(iwlwifi_mod_params.ant_coupling >
+			IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
+			true : false;
+
+	/* enable/disable bt channel inhibition */
+	priv->bt_ch_announce = iwlwifi_mod_params.bt_ch_announce;
+	IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
+		       (priv->bt_ch_announce) ? "On" : "Off");
+
+	/* these spin locks will be used in apm_ops.init and EEPROM access
+	 * we should init now
+	 */
+	spin_lock_init(&priv->statistics.lock);
+
+	/***********************
+	 * 2. Read REV register
+	 ***********************/
+	IWL_INFO(priv, "Detected %s, REV=0x%X\n",
+		priv->cfg->name, priv->trans->hw_rev);
+
+	if (iwl_trans_start_hw(priv->trans))
+		goto out_free_hw;
+
+	/* Read the EEPROM */
+	if (iwl_read_eeprom(priv->trans, &priv->eeprom_blob,
+			    &priv->eeprom_blob_size)) {
+		IWL_ERR(priv, "Unable to init EEPROM\n");
+		goto out_free_hw;
+	}
+
+	/* Reset chip to save power until we load uCode during "up". */
+	iwl_trans_stop_hw(priv->trans, false);
+
+	priv->eeprom_data = iwl_parse_eeprom_data(priv->trans->dev, priv->cfg,
+						  priv->eeprom_blob,
+						  priv->eeprom_blob_size);
+	if (!priv->eeprom_data)
+		goto out_free_eeprom_blob;
+
+	if (iwl_eeprom_check_version(priv->eeprom_data, priv->trans))
+		goto out_free_eeprom;
+
+	if (iwl_eeprom_init_hw_params(priv))
+		goto out_free_eeprom;
+
+	/* extract MAC Address */
+	memcpy(priv->addresses[0].addr, priv->eeprom_data->hw_addr, ETH_ALEN);
+	IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
+	priv->hw->wiphy->addresses = priv->addresses;
+	priv->hw->wiphy->n_addresses = 1;
+	num_mac = priv->eeprom_data->n_hw_addrs;
+	if (num_mac > 1) {
+		memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
+		       ETH_ALEN);
+		priv->addresses[1].addr[5]++;
+		priv->hw->wiphy->n_addresses++;
+	}
+
+	/************************
+	 * 4. Setup HW constants
+	 ************************/
+	iwl_set_hw_params(priv);
+
+	if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_IPAN_ENABLE)) {
+		IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN");
+		ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
+		/*
+		 * if not PAN, then don't support P2P -- might be a uCode
+		 * packaging bug or due to the eeprom check above
+		 */
+		ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
+		priv->sta_key_max_num = STA_KEY_MAX_NUM;
+		trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
+
+		/* Configure transport layer again*/
+		iwl_trans_configure(priv->trans, &trans_cfg);
+	}
+
+	/*******************
+	 * 5. Setup priv
+	 *******************/
+	for (i = 0; i < IWL_MAX_HW_QUEUES; i++) {
+		priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE;
+		if (i < IWLAGN_FIRST_AMPDU_QUEUE &&
+		    i != IWL_DEFAULT_CMD_QUEUE_NUM &&
+		    i != IWL_IPAN_CMD_QUEUE_NUM)
+			priv->queue_to_mac80211[i] = i;
+		atomic_set(&priv->queue_stop_count[i], 0);
+	}
+
+	if (iwl_init_drv(priv))
+		goto out_free_eeprom;
+
+	/* At this point both hw and priv are initialized. */
+
+	/********************
+	 * 6. Setup services
+	 ********************/
+	iwl_setup_deferred_work(priv);
+	iwl_setup_rx_handlers(priv);
+	iwl_testmode_init(priv);
+
+	iwl_power_initialize(priv);
+	iwl_tt_initialize(priv);
+
+	snprintf(priv->hw->wiphy->fw_version,
+		 sizeof(priv->hw->wiphy->fw_version),
+		 "%s", fw->fw_version);
+
+	priv->new_scan_threshold_behaviour =
+		!!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
+
+	priv->phy_calib_chain_noise_reset_cmd =
+		fw->ucode_capa.standard_phy_calibration_size;
+	priv->phy_calib_chain_noise_gain_cmd =
+		fw->ucode_capa.standard_phy_calibration_size + 1;
+
+	/* initialize all valid contexts */
+	iwl_init_context(priv, ucode_flags);
+
+	/**************************************************
+	 * This is still part of probe() in a sense...
+	 *
+	 * 7. Setup and register with mac80211 and debugfs
+	 **************************************************/
+	if (iwlagn_mac_setup_register(priv, &fw->ucode_capa))
+		goto out_destroy_workqueue;
+
+	if (iwl_dbgfs_register(priv, DRV_NAME))
+		IWL_ERR(priv,
+			"failed to create debugfs files. Ignoring error\n");
+
+	return op_mode;
+
+out_destroy_workqueue:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
+	iwl_uninit_drv(priv);
+out_free_eeprom_blob:
+	kfree(priv->eeprom_blob);
+out_free_eeprom:
+	iwl_free_eeprom_data(priv->eeprom_data);
+out_free_hw:
+	ieee80211_free_hw(priv->hw);
+out:
+	op_mode = NULL;
+	return op_mode;
+}
+
+static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
+
+	iwl_dbgfs_unregister(priv);
+
+	iwl_testmode_free(priv);
+	iwlagn_mac_unregister(priv);
+
+	iwl_tt_exit(priv);
+
+	/*This will stop the queues, move the device to low power state */
+	priv->ucode_loaded = false;
+	iwl_trans_stop_device(priv->trans);
+
+	kfree(priv->eeprom_blob);
+	iwl_free_eeprom_data(priv->eeprom_data);
+
+	/*netif_stop_queue(dev); */
+	flush_workqueue(priv->workqueue);
+
+	/* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes
+	 * priv->workqueue... so we can't take down the workqueue
+	 * until now... */
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
+
+	iwl_uninit_drv(priv);
+
+	dev_kfree_skb(priv->beacon_skb);
+
+	iwl_trans_stop_hw(priv->trans, true);
+	ieee80211_free_hw(priv->hw);
+}
+
+static const char * const desc_lookup_text[] = {
+	"OK",
+	"FAIL",
+	"BAD_PARAM",
+	"BAD_CHECKSUM",
+	"NMI_INTERRUPT_WDG",
+	"SYSASSERT",
+	"FATAL_ERROR",
+	"BAD_COMMAND",
+	"HW_ERROR_TUNE_LOCK",
+	"HW_ERROR_TEMPERATURE",
+	"ILLEGAL_CHAN_FREQ",
+	"VCC_NOT_STABLE",
+	"FH_ERROR",
+	"NMI_INTERRUPT_HOST",
+	"NMI_INTERRUPT_ACTION_PT",
+	"NMI_INTERRUPT_UNKNOWN",
+	"UCODE_VERSION_MISMATCH",
+	"HW_ERROR_ABS_LOCK",
+	"HW_ERROR_CAL_LOCK_FAIL",
+	"NMI_INTERRUPT_INST_ACTION_PT",
+	"NMI_INTERRUPT_DATA_ACTION_PT",
+	"NMI_TRM_HW_ER",
+	"NMI_INTERRUPT_TRM",
+	"NMI_INTERRUPT_BREAK_POINT",
+	"DEBUG_0",
+	"DEBUG_1",
+	"DEBUG_2",
+	"DEBUG_3",
+};
+
+static struct { char *name; u8 num; } advanced_lookup[] = {
+	{ "NMI_INTERRUPT_WDG", 0x34 },
+	{ "SYSASSERT", 0x35 },
+	{ "UCODE_VERSION_MISMATCH", 0x37 },
+	{ "BAD_COMMAND", 0x38 },
+	{ "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
+	{ "FATAL_ERROR", 0x3D },
+	{ "NMI_TRM_HW_ERR", 0x46 },
+	{ "NMI_INTERRUPT_TRM", 0x4C },
+	{ "NMI_INTERRUPT_BREAK_POINT", 0x54 },
+	{ "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
+	{ "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
+	{ "NMI_INTERRUPT_HOST", 0x66 },
+	{ "NMI_INTERRUPT_ACTION_PT", 0x7C },
+	{ "NMI_INTERRUPT_UNKNOWN", 0x84 },
+	{ "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
+	{ "ADVANCED_SYSASSERT", 0 },
+};
+
+static const char *desc_lookup(u32 num)
+{
+	int i;
+	int max = ARRAY_SIZE(desc_lookup_text);
+
+	if (num < max)
+		return desc_lookup_text[num];
+
+	max = ARRAY_SIZE(advanced_lookup) - 1;
+	for (i = 0; i < max; i++) {
+		if (advanced_lookup[i].num == num)
+			break;
+	}
+	return advanced_lookup[i].name;
+}
+
+#define ERROR_START_OFFSET  (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
+
+static void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+	struct iwl_trans *trans = priv->trans;
+	u32 base;
+	struct iwl_error_event_table table;
+
+	base = priv->device_pointers.error_event_table;
+	if (priv->cur_ucode == IWL_UCODE_INIT) {
+		if (!base)
+			base = priv->fw->init_errlog_ptr;
+	} else {
+		if (!base)
+			base = priv->fw->inst_errlog_ptr;
+	}
+
+	if (!iwlagn_hw_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv,
+			"Not valid error log pointer 0x%08X for %s uCode\n",
+			base,
+			(priv->cur_ucode == IWL_UCODE_INIT)
+					? "Init" : "RT");
+		return;
+	}
+
+	/*TODO: Update dbgfs with ISR error stats obtained below */
+	iwl_read_targ_mem_bytes(trans, base, &table, sizeof(table));
+
+	if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
+		IWL_ERR(trans, "Start IWL Error Log Dump:\n");
+		IWL_ERR(trans, "Status: 0x%08lX, count: %d\n",
+			priv->status, table.valid);
+	}
+
+	trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low,
+				      table.data1, table.data2, table.line,
+				      table.blink1, table.blink2, table.ilink1,
+				      table.ilink2, table.bcon_time, table.gp1,
+				      table.gp2, table.gp3, table.ucode_ver,
+				      table.hw_ver, table.brd_ver);
+	IWL_ERR(priv, "0x%08X | %-28s\n", table.error_id,
+		desc_lookup(table.error_id));
+	IWL_ERR(priv, "0x%08X | uPc\n", table.pc);
+	IWL_ERR(priv, "0x%08X | branchlink1\n", table.blink1);
+	IWL_ERR(priv, "0x%08X | branchlink2\n", table.blink2);
+	IWL_ERR(priv, "0x%08X | interruptlink1\n", table.ilink1);
+	IWL_ERR(priv, "0x%08X | interruptlink2\n", table.ilink2);
+	IWL_ERR(priv, "0x%08X | data1\n", table.data1);
+	IWL_ERR(priv, "0x%08X | data2\n", table.data2);
+	IWL_ERR(priv, "0x%08X | line\n", table.line);
+	IWL_ERR(priv, "0x%08X | beacon time\n", table.bcon_time);
+	IWL_ERR(priv, "0x%08X | tsf low\n", table.tsf_low);
+	IWL_ERR(priv, "0x%08X | tsf hi\n", table.tsf_hi);
+	IWL_ERR(priv, "0x%08X | time gp1\n", table.gp1);
+	IWL_ERR(priv, "0x%08X | time gp2\n", table.gp2);
+	IWL_ERR(priv, "0x%08X | time gp3\n", table.gp3);
+	IWL_ERR(priv, "0x%08X | uCode version\n", table.ucode_ver);
+	IWL_ERR(priv, "0x%08X | hw version\n", table.hw_ver);
+	IWL_ERR(priv, "0x%08X | board version\n", table.brd_ver);
+	IWL_ERR(priv, "0x%08X | hcmd\n", table.hcmd);
+	IWL_ERR(priv, "0x%08X | isr0\n", table.isr0);
+	IWL_ERR(priv, "0x%08X | isr1\n", table.isr1);
+	IWL_ERR(priv, "0x%08X | isr2\n", table.isr2);
+	IWL_ERR(priv, "0x%08X | isr3\n", table.isr3);
+	IWL_ERR(priv, "0x%08X | isr4\n", table.isr4);
+	IWL_ERR(priv, "0x%08X | isr_pref\n", table.isr_pref);
+	IWL_ERR(priv, "0x%08X | wait_event\n", table.wait_event);
+	IWL_ERR(priv, "0x%08X | l2p_control\n", table.l2p_control);
+	IWL_ERR(priv, "0x%08X | l2p_duration\n", table.l2p_duration);
+	IWL_ERR(priv, "0x%08X | l2p_mhvalid\n", table.l2p_mhvalid);
+	IWL_ERR(priv, "0x%08X | l2p_addr_match\n", table.l2p_addr_match);
+	IWL_ERR(priv, "0x%08X | lmpm_pmg_sel\n", table.lmpm_pmg_sel);
+	IWL_ERR(priv, "0x%08X | timestamp\n", table.u_timestamp);
+	IWL_ERR(priv, "0x%08X | flow_handler\n", table.flow_handler);
+}
+
+#define EVENT_START_OFFSET  (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
+			       u32 num_events, u32 mode,
+			       int pos, char **buf, size_t bufsz)
+{
+	u32 i;
+	u32 base;       /* SRAM byte address of event log header */
+	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
+
+	struct iwl_trans *trans = priv->trans;
+
+	if (num_events == 0)
+		return pos;
+
+	base = priv->device_pointers.log_event_table;
+	if (priv->cur_ucode == IWL_UCODE_INIT) {
+		if (!base)
+			base = priv->fw->init_evtlog_ptr;
+	} else {
+		if (!base)
+			base = priv->fw->inst_evtlog_ptr;
+	}
+
+	if (mode == 0)
+		event_size = 2 * sizeof(u32);
+	else
+		event_size = 3 * sizeof(u32);
+
+	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&trans->reg_lock, reg_flags);
+	if (unlikely(!iwl_grab_nic_access(trans)))
+		goto out_unlock;
+
+	/* Set starting address; reads will auto-increment */
+	iwl_write32(trans, HBUS_TARG_MEM_RADDR, ptr);
+
+	/* "time" is actually "data" for mode 0 (no timestamp).
+	* place event id # at far right for easier visual parsing. */
+	for (i = 0; i < num_events; i++) {
+		ev = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
+		time = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
+		if (mode == 0) {
+			/* data, ev */
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"EVT_LOG:0x%08x:%04u\n",
+						time, ev);
+			} else {
+				trace_iwlwifi_dev_ucode_event(trans->dev, 0,
+					time, ev);
+				IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
+					time, ev);
+			}
+		} else {
+			data = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"EVT_LOGT:%010u:0x%08x:%04u\n",
+						 time, data, ev);
+			} else {
+				IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
+					time, data, ev);
+				trace_iwlwifi_dev_ucode_event(trans->dev, time,
+					data, ev);
+			}
+		}
+	}
+
+	/* Allow device to power down */
+	iwl_release_nic_access(trans);
+out_unlock:
+	spin_unlock_irqrestore(&trans->reg_lock, reg_flags);
+	return pos;
+}
+
+/**
+ * iwl_print_last_event_logs - Dump the newest # of event log to syslog
+ */
+static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
+				    u32 num_wraps, u32 next_entry,
+				    u32 size, u32 mode,
+				    int pos, char **buf, size_t bufsz)
+{
+	/*
+	 * display the newest DEFAULT_LOG_ENTRIES entries
+	 * i.e the entries just before the next ont that uCode would fill.
+	 */
+	if (num_wraps) {
+		if (next_entry < size) {
+			pos = iwl_print_event_log(priv,
+						capacity - (size - next_entry),
+						size - next_entry, mode,
+						pos, buf, bufsz);
+			pos = iwl_print_event_log(priv, 0,
+						  next_entry, mode,
+						  pos, buf, bufsz);
+		} else
+			pos = iwl_print_event_log(priv, next_entry - size,
+						  size, mode, pos, buf, bufsz);
+	} else {
+		if (next_entry < size) {
+			pos = iwl_print_event_log(priv, 0, next_entry,
+						  mode, pos, buf, bufsz);
+		} else {
+			pos = iwl_print_event_log(priv, next_entry - size,
+						  size, mode, pos, buf, bufsz);
+		}
+	}
+	return pos;
+}
+
+#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
+
+int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
+			    char **buf, bool display)
+{
+	u32 base;       /* SRAM byte address of event log header */
+	u32 capacity;   /* event log capacity in # entries */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+	u32 size;       /* # entries that we'll print */
+	u32 logsize;
+	int pos = 0;
+	size_t bufsz = 0;
+	struct iwl_trans *trans = priv->trans;
+
+	base = priv->device_pointers.log_event_table;
+	if (priv->cur_ucode == IWL_UCODE_INIT) {
+		logsize = priv->fw->init_evtlog_size;
+		if (!base)
+			base = priv->fw->init_evtlog_ptr;
+	} else {
+		logsize = priv->fw->inst_evtlog_size;
+		if (!base)
+			base = priv->fw->inst_evtlog_ptr;
+	}
+
+	if (!iwlagn_hw_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv,
+			"Invalid event log pointer 0x%08X for %s uCode\n",
+			base,
+			(priv->cur_ucode == IWL_UCODE_INIT)
+					? "Init" : "RT");
+		return -EINVAL;
+	}
+
+	/* event log header */
+	capacity = iwl_read_targ_mem(trans, base);
+	mode = iwl_read_targ_mem(trans, base + (1 * sizeof(u32)));
+	num_wraps = iwl_read_targ_mem(trans, base + (2 * sizeof(u32)));
+	next_entry = iwl_read_targ_mem(trans, base + (3 * sizeof(u32)));
+
+	if (capacity > logsize) {
+		IWL_ERR(priv, "Log capacity %d is bogus, limit to %d "
+			"entries\n", capacity, logsize);
+		capacity = logsize;
+	}
+
+	if (next_entry > logsize) {
+		IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
+			next_entry, logsize);
+		next_entry = logsize;
+	}
+
+	size = num_wraps ? capacity : next_entry;
+
+	/* bail out if nothing in log */
+	if (size == 0) {
+		IWL_ERR(trans, "Start IWL Event Log Dump: nothing in log\n");
+		return pos;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (!(iwl_have_debug_level(IWL_DL_FW_ERRORS)) && !full_log)
+		size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+			? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#else
+	size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+		? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#endif
+	IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
+		size);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (display) {
+		if (full_log)
+			bufsz = capacity * 48;
+		else
+			bufsz = size * 48;
+		*buf = kmalloc(bufsz, GFP_KERNEL);
+		if (!*buf)
+			return -ENOMEM;
+	}
+	if (iwl_have_debug_level(IWL_DL_FW_ERRORS) || full_log) {
+		/*
+		 * if uCode has wrapped back to top of log,
+		 * start at the oldest entry,
+		 * i.e the next one that uCode would fill.
+		 */
+		if (num_wraps)
+			pos = iwl_print_event_log(priv, next_entry,
+						capacity - next_entry, mode,
+						pos, buf, bufsz);
+		/* (then/else) start at top of log */
+		pos = iwl_print_event_log(priv, 0,
+					  next_entry, mode, pos, buf, bufsz);
+	} else
+		pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
+						next_entry, size, mode,
+						pos, buf, bufsz);
+#else
+	pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
+					next_entry, size, mode,
+					pos, buf, bufsz);
+#endif
+	return pos;
+}
+
+static void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand)
+{
+	unsigned int reload_msec;
+	unsigned long reload_jiffies;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (iwl_have_debug_level(IWL_DL_FW_ERRORS))
+		iwl_print_rx_config_cmd(priv, IWL_RXON_CTX_BSS);
+#endif
+
+	/* uCode is no longer loaded. */
+	priv->ucode_loaded = false;
+
+	/* Set the FW error flag -- cleared on iwl_down */
+	set_bit(STATUS_FW_ERROR, &priv->status);
+
+	iwl_abort_notification_waits(&priv->notif_wait);
+
+	/* Keep the restart process from trying to send host
+	 * commands by clearing the ready bit */
+	clear_bit(STATUS_READY, &priv->status);
+
+	wake_up(&priv->trans->wait_command_queue);
+
+	if (!ondemand) {
+		/*
+		 * If firmware keep reloading, then it indicate something
+		 * serious wrong and firmware having problem to recover
+		 * from it. Instead of keep trying which will fill the syslog
+		 * and hang the system, let's just stop it
+		 */
+		reload_jiffies = jiffies;
+		reload_msec = jiffies_to_msecs((long) reload_jiffies -
+					(long) priv->reload_jiffies);
+		priv->reload_jiffies = reload_jiffies;
+		if (reload_msec <= IWL_MIN_RELOAD_DURATION) {
+			priv->reload_count++;
+			if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) {
+				IWL_ERR(priv, "BUG_ON, Stop restarting\n");
+				return;
+			}
+		} else
+			priv->reload_count = 0;
+	}
+
+	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+		if (iwlwifi_mod_params.restart_fw) {
+			IWL_DEBUG_FW_ERRORS(priv,
+				  "Restarting adapter due to uCode error.\n");
+			queue_work(priv->workqueue, &priv->restart);
+		} else
+			IWL_DEBUG_FW_ERRORS(priv,
+				  "Detected FW error, but not restarting\n");
+	}
+}
+
+static void iwl_nic_error(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	IWL_ERR(priv, "Loaded firmware version: %s\n",
+		priv->fw->fw_version);
+
+	iwl_dump_nic_error_log(priv);
+	iwl_dump_nic_event_log(priv, false, NULL, false);
+
+	iwlagn_fw_error(priv, false);
+}
+
+static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	if (!iwl_check_for_ct_kill(priv)) {
+		IWL_ERR(priv, "Restarting adapter queue is full\n");
+		iwlagn_fw_error(priv, false);
+	}
+}
+
+#define EEPROM_RF_CONFIG_TYPE_MAX      0x3
+
+static void iwl_nic_config(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	u16 radio_cfg = priv->eeprom_data->radio_cfg;
+
+	/* SKU Control */
+	iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
+			  CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH |
+			  CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP,
+			  (CSR_HW_REV_STEP(priv->trans->hw_rev) <<
+				CSR_HW_IF_CONFIG_REG_POS_MAC_STEP) |
+			  (CSR_HW_REV_DASH(priv->trans->hw_rev) <<
+				CSR_HW_IF_CONFIG_REG_POS_MAC_DASH));
+
+	/* write radio config values to register */
+	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) {
+		u32 reg_val =
+			EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <<
+				CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE |
+			EEPROM_RF_CFG_STEP_MSK(radio_cfg) <<
+				CSR_HW_IF_CONFIG_REG_POS_PHY_STEP |
+			EEPROM_RF_CFG_DASH_MSK(radio_cfg) <<
+				CSR_HW_IF_CONFIG_REG_POS_PHY_DASH;
+
+		iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
+				  CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE |
+				  CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP |
+				  CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, reg_val);
+
+		IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n",
+			 EEPROM_RF_CFG_TYPE_MSK(radio_cfg),
+			 EEPROM_RF_CFG_STEP_MSK(radio_cfg),
+			 EEPROM_RF_CFG_DASH_MSK(radio_cfg));
+	} else {
+		WARN_ON(1);
+	}
+
+	/* set CSR_HW_CONFIG_REG for uCode use */
+	iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
+
+	/* W/A : NIC is stuck in a reset state after Early PCIe power off
+	 * (PCIe power is lost before PERST# is asserted),
+	 * causing ME FW to lose ownership and not being able to obtain it back.
+	 */
+	iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG,
+			       APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
+			       ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+
+	if (priv->lib->nic_config)
+		priv->lib->nic_config(priv);
+}
+
+static void iwl_wimax_active(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	clear_bit(STATUS_READY, &priv->status);
+	IWL_ERR(priv, "RF is used by WiMAX\n");
+}
+
+static void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	int mq = priv->queue_to_mac80211[queue];
+
+	if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE))
+		return;
+
+	if (atomic_inc_return(&priv->queue_stop_count[mq]) > 1) {
+		IWL_DEBUG_TX_QUEUES(priv,
+			"queue %d (mac80211 %d) already stopped\n",
+			queue, mq);
+		return;
+	}
+
+	set_bit(mq, &priv->transport_queue_stop);
+	ieee80211_stop_queue(priv->hw, mq);
+}
+
+static void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, int queue)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	int mq = priv->queue_to_mac80211[queue];
+
+	if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE))
+		return;
+
+	if (atomic_dec_return(&priv->queue_stop_count[mq]) > 0) {
+		IWL_DEBUG_TX_QUEUES(priv,
+			"queue %d (mac80211 %d) already awake\n",
+			queue, mq);
+		return;
+	}
+
+	clear_bit(mq, &priv->transport_queue_stop);
+
+	if (!priv->passive_no_rx)
+		ieee80211_wake_queue(priv->hw, mq);
+}
+
+void iwlagn_lift_passive_no_rx(struct iwl_priv *priv)
+{
+	int mq;
+
+	if (!priv->passive_no_rx)
+		return;
+
+	for (mq = 0; mq < IWLAGN_FIRST_AMPDU_QUEUE; mq++) {
+		if (!test_bit(mq, &priv->transport_queue_stop)) {
+			IWL_DEBUG_TX_QUEUES(priv, "Wake queue %d", mq);
+			ieee80211_wake_queue(priv->hw, mq);
+		} else {
+			IWL_DEBUG_TX_QUEUES(priv, "Don't wake queue %d", mq);
+		}
+	}
+
+	priv->passive_no_rx = false;
+}
+
+static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	struct ieee80211_tx_info *info;
+
+	info = IEEE80211_SKB_CB(skb);
+	iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
+	dev_kfree_skb_any(skb);
+}
+
+static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	if (state)
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+	else
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+
+	wiphy_rfkill_set_hw_state(priv->hw->wiphy, state);
+}
+
+static const struct iwl_op_mode_ops iwl_dvm_ops = {
+	.start = iwl_op_mode_dvm_start,
+	.stop = iwl_op_mode_dvm_stop,
+	.rx = iwl_rx_dispatch,
+	.queue_full = iwl_stop_sw_queue,
+	.queue_not_full = iwl_wake_sw_queue,
+	.hw_rf_kill = iwl_set_hw_rfkill_state,
+	.free_skb = iwl_free_skb,
+	.nic_error = iwl_nic_error,
+	.cmd_queue_full = iwl_cmd_queue_full,
+	.nic_config = iwl_nic_config,
+	.wimax_active = iwl_wimax_active,
+};
+
+/*****************************************************************************
+ *
+ * driver and module entry point
+ *
+ *****************************************************************************/
+static int __init iwl_init(void)
+{
+
+	int ret;
+	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+	pr_info(DRV_COPYRIGHT "\n");
+
+	ret = iwlagn_rate_control_register();
+	if (ret) {
+		pr_err("Unable to register rate control algorithm: %d\n", ret);
+		return ret;
+	}
+
+	ret = iwl_opmode_register("iwldvm", &iwl_dvm_ops);
+	if (ret) {
+		pr_err("Unable to register op_mode: %d\n", ret);
+		iwlagn_rate_control_unregister();
+	}
+
+	return ret;
+}
+module_init(iwl_init);
+
+static void __exit iwl_exit(void)
+{
+	iwl_opmode_deregister("iwldvm");
+	iwlagn_rate_control_unregister();
+}
+module_exit(iwl_exit);