diff options
author | Kumar Gala <galak@kernel.crashing.org> | 2007-08-22 22:53:39 -0500 |
---|---|---|
committer | Kumar Gala <galak@kernel.crashing.org> | 2007-08-22 22:57:54 -0500 |
commit | 34a27ffdf59f80fe165f5c56a0be57d55b6da63d (patch) | |
tree | 786e5b50907bbe5e63ecba03f2f2a5c9a1264ebd /drivers/mtd/maps | |
parent | 3feb0ff1607ab3b7dcd36b2347f00c41774464c8 (diff) |
[MTD] Remove dead maps
The tqm834x map Kconfig options depends on TQM834x which does not
exist anywhere else in the kernel.
The pq2fads map Kconfig/makefile support was removed a while ago but
the actual file persisted.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'drivers/mtd/maps')
-rw-r--r-- | drivers/mtd/maps/Kconfig | 8 | ||||
-rw-r--r-- | drivers/mtd/maps/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/maps/pq2fads.c | 88 | ||||
-rw-r--r-- | drivers/mtd/maps/tqm834x.c | 286 |
4 files changed, 0 insertions, 383 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 3a6566adcdd..5850ccd0dc0 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -384,14 +384,6 @@ config MTD_REDWOOD Redwood board. If you have one of these boards and would like to use the flash chips on it, say 'Y'. -config MTD_TQM834x - tristate "Flash device mapped on TQ Components TQM834x Boards" - depends on MTD_CFI && TQM834x - help - This enables access routines for the flash chips on the - TQ Components TQM834x boards. If you have one of these boards - and would like to use the flash chips on it, say 'Y'. - config MTD_OCELOT tristate "Momenco Ocelot boot flash device" depends on MOMENCO_OCELOT diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 970b189271a..b9019b1b196 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -70,4 +70,3 @@ obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o -obj-$(CONFIG_MTD_TQM834x) += tqm834x.o diff --git a/drivers/mtd/maps/pq2fads.c b/drivers/mtd/maps/pq2fads.c deleted file mode 100644 index fb78d87cc13..00000000000 --- a/drivers/mtd/maps/pq2fads.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * drivers/mtd/maps/pq2fads.c - * - * Mapping for the flash SIMM on 8272ADS and PQ2FADS board - * - * Author: Vitaly Bordug <vbordug@ru.mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/io.h> -#include <asm/ppcboot.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> - -/* - NOTE: bank width and interleave relative to the installed flash - should have been chosen within MTD_CFI_GEOMETRY options. - */ -#define PQ2FADS_BANK_WIDTH 4 - -static struct mtd_partition pq2fads_partitions[] = { - { -#ifdef CONFIG_ADS8272 - .name = "HRCW", - .size = 0x40000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "User FS", - .size = 0x5c0000, - .offset = 0x40000, -#else - .name = "User FS", - .size = 0x600000, - .offset = 0, -#endif - }, { - .name = "uImage", - .size = 0x100000, - .offset = 0x600000, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "bootloader", - .size = 0x40000, - .offset = 0x700000, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "bootloader env", - .size = 0x40000, - .offset = 0x740000, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - } -}; - - -/* pointer to MPC885ADS board info data */ -extern unsigned char __res[]; - -static int __init init_pq2fads_mtd(void) -{ - bd_t *bd = (bd_t *)__res; - physmap_configure(bd->bi_flashstart, bd->bi_flashsize, PQ2FADS_BANK_WIDTH, NULL); - - physmap_set_partitions(pq2fads_partitions, - sizeof (pq2fads_partitions) / - sizeof (pq2fads_partitions[0])); - return 0; -} - -static void __exit cleanup_pq2fads_mtd(void) -{ -} - -module_init(init_pq2fads_mtd); -module_exit(cleanup_pq2fads_mtd); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("MTD map and partitions for MPC8272ADS boards"); diff --git a/drivers/mtd/maps/tqm834x.c b/drivers/mtd/maps/tqm834x.c deleted file mode 100644 index 9adc970e55e..00000000000 --- a/drivers/mtd/maps/tqm834x.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * drivers/mtd/maps/tqm834x.c - * - * MTD mapping driver for TQM834x boards - * - * Copyright 2005 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <asm/io.h> -#include <asm/ppcboot.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#define FLASH_BANK_MAX 2 - -extern unsigned char __res[]; - -/* trivial struct to describe partition information */ -struct mtd_part_def -{ - int nums; - unsigned char *type; - struct mtd_partition* mtd_part; -}; - -static struct mtd_info* mtd_banks[FLASH_BANK_MAX]; -static struct map_info* map_banks[FLASH_BANK_MAX]; -static struct mtd_part_def part_banks[FLASH_BANK_MAX]; - -static unsigned long num_banks; -static unsigned long start_scan_addr; - -#ifdef CONFIG_MTD_PARTITIONS -/* - * The following defines the partition layout of TQM834x boards. - * - * See include/linux/mtd/partitions.h for definition of the - * mtd_partition structure. - * - * Assume minimal initial size of 4 MiB per bank, will be updated - * later in init_tqm834x_mtd() routine. - */ - -/* Partition definition for the first flash bank which is always present. */ -static struct mtd_partition tqm834x_partitions_bank1[] = { - { - .name = "u-boot", /* u-boot firmware */ - .offset = 0x00000000, - .size = 0x00040000, /* 256 KiB */ - /*mask_flags: MTD_WRITEABLE, * force read-only */ - }, - { - .name = "env", /* u-boot environment */ - .offset = 0x00040000, - .size = 0x00020000, /* 128 KiB */ - /*mask_flags: MTD_WRITEABLE, * force read-only */ - }, - { - .name = "kernel", /* linux kernel image */ - .offset = 0x00060000, - .size = 0x00100000, /* 1 MiB */ - /*mask_flags: MTD_WRITEABLE, * force read-only */ - }, - { - .name = "initrd", /* ramdisk image */ - .offset = 0x00160000, - .size = 0x00200000, /* 2 MiB */ - }, - { - .name = "user", /* user data */ - .offset = 0x00360000, - .size = 0x000a0000, /* remaining space */ - /* NOTE: this parttion size is re-calcated in */ - /* init_tqm834x_mtd() to cover actual remaining space. */ - }, -}; - -/* Partition definition for the second flash bank which may be present on some - * TQM834x boards. - */ -static struct mtd_partition tqm834x_partitions_bank2[] = { - { - .name = "jffs2", /* jffs2 filesystem */ - .offset = 0x00000000, - .size = 0x00400000, /* whole device */ - /* NOTE: this parttion size is re-calcated in */ - /* init_tqm834x_mtd() to cover actual device size. */ - }, -}; - -#endif /* CONFIG_MTD_PARTITIONS */ - -static int __init init_tqm834x_mtd(void) -{ - int idx = 0, ret = 0; - unsigned long flash_addr, flash_size, mtd_size = 0; - - /* pointer to TQM834x board info data */ - bd_t *bd = (bd_t *)__res; -#ifdef CONFIG_MTD_CMDLINE_PARTS - int n; - char mtdid[4]; - const char *part_probes[] = { "cmdlinepart", NULL }; -#endif - - flash_addr = bd->bi_flashstart; - flash_size = bd->bi_flashsize; - - /* request maximum flash size address space */ - start_scan_addr = (unsigned long)ioremap(flash_addr, flash_size); - if (!start_scan_addr) { - printk("%s: Failed to ioremap address: 0x%lx\n", - __FUNCTION__, flash_addr); - return -EIO; - } - - for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { - if (mtd_size >= flash_size) - break; - - pr_debug("%s: chip probing count %d\n", __FUNCTION__, idx); - - map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL); - if (map_banks[idx] == NULL) { - ret = -ENOMEM; - goto error_mem; - } - map_banks[idx]->name = kzalloc(16, GFP_KERNEL); - if (map_banks[idx]->name == NULL) { - ret = -ENOMEM; - goto error_mem; - } - - sprintf(map_banks[idx]->name, "TQM834x-%d", idx); - map_banks[idx]->size = flash_size; - map_banks[idx]->bankwidth = 4; - - simple_map_init(map_banks[idx]); - - map_banks[idx]->virt = (void __iomem *) - (start_scan_addr + ((idx > 0) ? - (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0)); - map_banks[idx]->phys = - flash_addr + ((idx > 0) ? - (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0); - - /* start to probe flash chips */ - mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]); - if (mtd_banks[idx]) { - mtd_banks[idx]->owner = THIS_MODULE; - mtd_size += mtd_banks[idx]->size; - num_banks++; - pr_debug("%s: bank %ld, name: %s, size: %d bytes \n", - __FUNCTION__, num_banks, - mtd_banks[idx]->name, mtd_banks[idx]->size); - } - } - - /* no supported flash chips found */ - if (!num_banks) { - printk("TQM834x: No supported flash chips found!\n"); - ret = -ENXIO; - goto error_mem; - } - -#ifdef CONFIG_MTD_PARTITIONS - /* - * Select static partition definitions - */ - n = ARRAY_SIZE(tqm834x_partitions_bank1); - part_banks[0].mtd_part = tqm834x_partitions_bank1; - part_banks[0].type = "static image bank1"; - part_banks[0].nums = n; - - /* update last partition size to cover actual remaining space */ - tqm834x_partitions_bank1[n - 1].size = - mtd_banks[0]->size - - tqm834x_partitions_bank1[n - 1].offset; - - /* check if we have second bank? */ - if (num_banks == 2) { - n = ARRAY_SIZE(tqm834x_partitions_bank2); - part_banks[1].mtd_part = tqm834x_partitions_bank2; - part_banks[1].type = "static image bank2"; - part_banks[1].nums = n; - - /* update last partition size to cover actual remaining space */ - tqm834x_partitions_bank2[n - 1].size = - mtd_banks[1]->size - - tqm834x_partitions_bank2[n - 1].offset; - } - - for(idx = 0; idx < num_banks ; idx++) { -#ifdef CONFIG_MTD_CMDLINE_PARTS - sprintf(mtdid, "%d", idx); - n = parse_mtd_partitions(mtd_banks[idx], - part_probes, - &part_banks[idx].mtd_part, - 0); - pr_debug("%s: %d command line partitions on bank %s\n", - __FUNCTION__, n, mtdid); - if (n > 0) { - part_banks[idx].type = "command line"; - part_banks[idx].nums = n; - } -#endif /* CONFIG_MTD_CMDLINE_PARTS */ - if (part_banks[idx].nums == 0) { - printk(KERN_NOTICE - "TQM834x flash bank %d: no partition info " - "available, registering whole device\n", idx); - add_mtd_device(mtd_banks[idx]); - } else { - printk(KERN_NOTICE - "TQM834x flash bank %d: Using %s partition " - "definition\n", idx, part_banks[idx].type); - add_mtd_partitions(mtd_banks[idx], - part_banks[idx].mtd_part, - part_banks[idx].nums); - } - } -#else /* ! CONFIG_MTD_PARTITIONS */ - printk(KERN_NOTICE "TQM834x flash: registering %d flash banks " - "at once\n", num_banks); - - for(idx = 0 ; idx < num_banks ; idx++) - add_mtd_device(mtd_banks[idx]); - -#endif /* CONFIG_MTD_PARTITIONS */ - - return 0; -error_mem: - for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { - if (map_banks[idx] != NULL) { - if (map_banks[idx]->name != NULL) { - kfree(map_banks[idx]->name); - map_banks[idx]->name = NULL; - } - kfree(map_banks[idx]); - map_banks[idx] = NULL; - } - } - - iounmap((void *)start_scan_addr); - - return ret; -} - -static void __exit cleanup_tqm834x_mtd(void) -{ - unsigned int idx = 0; - for(idx = 0 ; idx < num_banks ; idx++) { - /* destroy mtd_info previously allocated */ - if (mtd_banks[idx]) { - del_mtd_partitions(mtd_banks[idx]); - map_destroy(mtd_banks[idx]); - } - - /* release map_info not used anymore */ - kfree(map_banks[idx]->name); - kfree(map_banks[idx]); - } - - if (start_scan_addr) { - iounmap((void *)start_scan_addr); - start_scan_addr = 0; - } -} - -module_init(init_tqm834x_mtd); -module_exit(cleanup_tqm834x_mtd); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Wolfgang Denk <wd@denx.de>"); -MODULE_DESCRIPTION("MTD map driver for TQM834x boards"); |